Design release engineer full time jobs - 59 jobs

Job DescriptionDescriptionWe are an Ohio based mechanical and electrical consulting engineering firm with offices in North Royalton and Columbus established in 1993. We are seeking a full-time mechanical engineer or mechanical designer with at least 3 years of experience to support the growth and expansion of our business. The position would start as a "mechanical engineer/designer" and potentially progress over time to "project manager” or “project engineer." Key ResponsibilitiesPosition will involve HVAC and Plumbing system design, design computations including loads, air and piping distribution and sizing, equipment selection, specification preparation, field work (both design investigation and construction observation), design review and correspondence with clients, colleagues, owners, and contractors. • Preparation of design layouts for commercial and industrial mechanical systems based on specific design objectives. • Preparation of schematics for various systems. • Collaboration with all disciplines to achieve completed coordinated design and reviewing the work of others. • Performance of on-site investigation to confirm existing conditions. • Developing familiarity with current mechanical codes and standards. • Forming relationships with equal level personnel of other disciplines (architectural, electrical, structural civil, etc.) and manufacturing sales representatives. • Becoming familiar with and preparing general and mechanical specifications. Skills, Knowledge and Expertise• Must have consultative mechanical engineering experience. Interpersonal skills to work effectively with others. • Familiarity with system specific materials, components, and systems. • Basic knowledge of high mathematics relative to the work. • Oral and written communications skills. • Analytical ability to solve complex problems. • Working ability/knowledge of AutoCad. • Working ability/knowledge of REVIT is not required, but desired. Benefits We operate an open and collaborative space that allows for an environment where ideas are freely exchanged, solutions are created, and proposals become reality. Even though the pace is fast, we do what we can to maintain a respectful, cooperative spirit throughout the office that considers schedules, work habits, personal priorities, and “space”. Additional benefits include the following: • 401(k) with Safe Harbor contribution of 3% of salary • Full coverage of Health insurance in Medical Mutual SuperMed PPO Network • Paid time off including vacations and holidays.

In this role, you will make an impact in the following ways: + May contribute to investigating Value Package Introduction (VPI) program team or field-based issues, understands causal mechanisms, recommends appropriate action, owns problem resolution from a design perspective, while documenting results with guidance from more experienced team members. + Applies and supports the execution of processes such as Critical Design Decisions, System Design and Validation Consideration Checklist, Design Review, and tools such as iDFMEA, DVA, GD&T, CREO, ANSYS Workbench required to enable high quality component and subsystem-level design decision making and design refinement. + May support more experienced team members in obtaining input and their negotiating with cross-functional and cross-discipline technical experts and senior-level designers to communicate the component and subsystem design intent through a thorough Design Review package to the Product Preceding Technology, (PPT), Value Package Introduction (VPI), or Value Package Change Request (VPCR) team requiring a such holistic assessment of various design concepts. + Supports design decision making in the areas of concept selection, concept optimization, and design specifications that impact customers targeted to be served by a given Product Preceding Technology, (PPT), Value Package Introduction (VPI), or Value Package Change Request (VPCR) initiative. + May include activities in problem resolution for moderately complex components, products, systems, subsystems, or services with a greater degree of technical complexity and ambiguity to support team members with greater accountability to the project team. Supervised execution of established work processes and systems, while still developing technology or product knowledge; engages with the improvement of systems and processes. + No direct management of people but could involve limited coordination of work amongst technicians and/or temporary student employees. + Contributes effectively toward team goals, exhibits influence within a work group and continues to develop proficiency in the competency areas critical to success in the role. RESPONSIBILITIES To be successful in this role you will need the following: + Product Failure Mode Avoidance + Product Problem Solving + Product Verification and Validation Management + Product Development Execution, Monitoring and Control + Technical Documentation + System Capability Engineering + Cross-Functional Design Integration + Technical Documentation + Decision Quality + Drive Results + Collaborates + Communicates Effectively + Self-Development Degree Programs Considered: Bachelor's, Master's, PhD Major Programs Typically Considered: All Engineering Majors QUALIFICATIONS 2026 Monthly Salary Range by Degree Level: + Bachelor's - $3,900 - $5,000 + Master's - $6,000 + PhD - $7,300 Please note that the salary range provided is a good faith estimate of the applicable range. The final salary offer will be determined after considering relevant factors, including a candidate's qualifications and experience, where appropriate. Co-Op program criteria: + Must be a full-time enrolled student pursuing an undergraduate or graduate degree at an accredited U.S. college/University + Minimum 2.5 or above GPA preferred + Must be able to complete a minimum of 4-months to 6-months or a maximum of a 12-months commitment + Must be able to complete 40 hours per week + Willingness to learn from others on the job + Must be currently residing within the continental U.S. Cummins and E-verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates the right to work using E-Verify. Cummins will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Ready to think beyond your desk? Apply for this opportunity to start your career with Cummins today. careers.cummins.com Job Engineering Organization Cummins Inc. Role Category On-site with Flexibility Job Type Student - Cooperative/12 Month Placement ReqID 2422771 Relocation Package No 100% On-Site No Cummins and E-Verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates the right to work using E-Verify and will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Visit *************** to know your rights on workplace discrimination.

Job ID 249596 Posted 26-Nov-2025 Service line PJM Segment Role type Full-time Areas of Interest Construction, Data Centers, Project Management **About the Role:** As a Data Center Mechanical Systems Engineer you will assume a pivotal role in the development, rigorous analysis, and optimization of the mechanical cooling infrastructure of next-generation data centers. You will leverage an advanced suite of analytical tools to unearth crucial data points that inform the design process for highly efficient mechanical systems. Your fundamental understanding of thermodynamics and fluid flow will guide your analysis of air and waterside systems in the evaluation of a highly complex data center environment with mission critical operational requirements. You must be a persuasive and concise communicator, adept at articulating complex technical concepts across all digital platforms, and capable of delivering actionable recommendations to cross-functional engineers and architects to elevate the mechanical systems within our data centers and accelerate the pace of construction. **What You'll Do:** + Serve as a technical lead for hyperscale data center clients mechanical infrastructure, collaborating with Planning, Operations, Execution, and Construction teams to develop new data center (DC) mechanical infrastructure systems. + Work directly with clients to prepare all elements of the project. This includes the scope of work, project delivery resource requirements, cost estimates & budget, work plan schedule & milestones, quality control, and risk identification. + Provide detailed thermal analysis of proposed technologies using software tooling including computation fluid dynamics and hydraulic modeling. + Spearhead the insertion of new technologies by collaborating with core Engineering and Operations teams during development. + Innovate custom data center cooling components, guiding these products through development and testing to construction and operations. + Provide and prepare documents including: statement of work, engineering analysis and reports, design documents, product specifications, drawings, budget, cost estimates, schedule and commissioning test plans. + Collaborate with partner teams to optimize the existing fleet and future products to meet data center market demands. + Apply advanced knowledge to seek and develop new, better methods for accomplishing both individual and department objectives. + Showcase expertise in own job discipline and in-depth knowledge of other job disciplines within the organization function. + Coach others to develop in-depth knowledge and expertise in most or all areas within the function. + Lead by example and model behaviors that are consistent with the company values. Anticipates potential objections and persuades others, often at senior levels and of divergent interest, to adopt a different point of view. + Impact the achievement of customer, operational, project, or service objectives across multi-discipline teams. Work is guided by functional policies which impact the design of procedures and policies. + Contribute to new products, processes, standards, and/or operational plans in support of achieving functional goals. + Communicate difficult and complex ideas with the ability to influence. **What You'll Need:** + Bachelor's Degree preferred with 3-5 years of relevant experience. Masters degree in Mechanical Engineering or Professional Engineering (PE) license is preferred. In lieu of a degree, a combination of experience and education will be considered. 3 years of mission-critical facility mechanical infrastructure systems. + Experience with design, commissioning, and construction of large scale cooling/heating/power generation systems. + Experience in thermal analysis and data center cooling systems. Proficiency with water and energy calculations. + The innovative mentality to develop methods that go beyond existing solutions. + Ability to solve unique problems using standard and innovative solutions having a broad impact on the business. + Proficiency with 6Sigma, AFT Fathom, Python, Google Sheets. + Demonstrated experience in applying data center technology is preferred. + Prefer experience with SQL, C++, Pipe Stress Analysis. + Expert organizational skills with an advanced inquisitive mindset. **Disclaimer:** Please be advised that effective January 1, 2025, CBRE Project Management and Turner &Townsend was consolidated into a single global business entity. As a candidate applying for a position, you should be aware that while your initial employment may be with Turner & Townsend PJM US LLC, you will subsequently transfer directly to Turner & Townsend at a date to be determined. Turner & Townsend carefully considers multiple factors to determine compensation, including a candidate's education, training, and experience. The minimum salary for this position is $130,000 annually and the maximum salary for this position is $150,000 annually. The compensation that is offered to a successful candidate will depend on the candidate's skills, qualifications, and experience. Successful candidates will also be eligible for a discretionary bonus based on Turner & Townsend's applicable benefit program. This role will provide the following benefits: 401(K), Dental insurance, Health insurance, Life insurance, and Vision insurance. **Equal Employment Opportunity:** CBRE has a long-standing commitment to providing equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, pregnancy, age, citizenship, marital status, disability, veteran status, political belief, or any other basis protected by applicable law. **Candidate Accommodations:** CBRE values the differences of all current and prospective employees and recognizes how every employee contributes to our company's success. CBRE provides reasonable accommodations in job application procedures for individuals with disabilities. If you require assistance due to a disability in the application or recruitment process, please submit a request via email at recruitingaccommodations@cbre.com or via telephone at *************** (U.S.) and *************** (Canada). CBRE, Inc. is an Equal Opportunity and Affirmative Action Employer (Women/Minorities/Persons with Disabilities/US Veterans)

An engineering firm that has been in business for decades is hiring a Senior Mechanical Engineer with Healthcare project experience for their Columbus team! Responsibilities: Work closely with management to lead engineering team on healthcare projects HVAC\/plumbing calculations Building load analysis (Trane Trace or Carrier HP) Building\/equipment and program assessments Construction administrative duties including shop drawing review and RFI\/project closeouts Mentor\/train junior staff Complete projects by due date Build\/maintain client relationships Requirements: Bachelor's Degree in Mechanical Engineering 12+ years of mechanical design experience Experience with healthcare engineering, planning and\/or programming HVAC\/plumbing design experience Proficient in AutoCAD and Revit Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! **************************************** ************** "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"37675481","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Job Opening ID","uitype":111,"value":"47179"},{"field Label":"Location","uitype":1,"value":"Columbus"},{"field Label":"Industry","uitype":2,"value":"Consulting"},{"field Label":"City","uitype":1,"value":"Columbus"},{"field Label":"State\/Province","uitype":1,"value":"Ohio"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"43085"}],"header Name":"Mechanical Engineer (Healthcare)","widget Id":"2**********0059050","is JobBoard":"false","user Id":"2**********0736174","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":true,"job Id":"2**********3818961","FontSize":"12","google IndexUrl":"https:\/\/harrisonconsultingsolutions.zohorecruit.com\/recruit\/ViewJob.na?digest=8DY.bVOboIBo7ZJhQVLAWB4k60@tcdqcny.5DWFYO58\-&embedsource=Google","location":"Columbus","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"3cgkl37b76de065e24115963f6b2941ca7d80"}

Description Job Title: Senior Design Engineer - Precision Machinery Design Location: Indianapolis, IN - onsite only Full-Time, direct hire (not a contract role) Looking for a place that is 24% to 52% LESS expensive to live with a great quality of life? Our client is seeking an experienced Senior Design Engineer with a background in designing high-precision, moving machinery to join their team. This role requires deep expertise in mechanical systems, linear actuators, motion control, and high-precision tooling. The ideal candidate will have a proven track record of designing CNC machines, machining centers, or other high-accuracy mechanical systems. Key Responsibilities: Lead mechanical design projects for complex, high-precision equipment, including motion control systems, material handling components, and structural assemblies. Develop and optimize designs for moving mechanical systems, with a focus on linear and rotary motion precision, thermal stability, and vibration damping. Collaborate with electrical and software engineers to integrate mechanical and control systems seamlessly. Oversee the design and specification of components such as servo motors, ball screws, linear rails, bearings, and actuators. Conduct design validation through FEA (Finite Element Analysis), tolerance stack-up analysis, and prototyping. Ensure all designs meet relevant industry standards for precision manufacturing and safety. Work with suppliers and manufacturing partners to source custom and off-the-shelf components and ensure high-quality builds. Drive continuous improvement initiatives in machine reliability, repeatability, and performance. Qualifications Bachelor's or Master's degree in Mechanical Engineering, Mechatronics, or a related field. 10+ years of experience in designing precision machinery, such as CNC machines, machining tools, or automated production equipment. Strong expertise in motion control systems, precision assemblies, and the design of moving mechanical systems. Proficiency in 3D CAD software (e.g., SolidWorks, Creo, or NX. NX Preferred)). Experience with GD&T (Geometric Dimensioning & Tolerancing) and precision manufacturing processes. Familiarity with servo motors, ball screws, and linear motion control technologies. Excellent problem-solving, communication, and project management skills. Why Join the team? Work on cutting-edge projects that push the boundaries of precision manufacturing. Collaborate with industry leaders in aerospace and advanced manufacturing. Competitive salary and benefits, including equity opportunities. Be part of a fast-growing company shaping the future of metal 3D printing. What the company is offering: Compensation depending on experience; $130k to $170k Bonus or equity Full medical, dental, and vision 100% paid by the company for employees and their families. Paid time off 9 holidays Sound interesting? Send your resume to [email protected]

About Us QISG leverages Quanta's comprehensive resources to deliver collaborative solutions for our partners' energy infrastructure needs. We use in-house talent, expertise and resources to plan, design, engineer, manage, conduct maintenance on and construct projects. Our turnkey service capabilities provide our customers with efficiency, consistency, attention to detail and safe execution. The QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environmental Planning, Permitting, Title and Land Management expertise that ensure outstanding results for our clients. About this Role Job Title: Design Engineer - Transmission Line At QISG, our Transmission Line teams play a vital role in the safe, reliable, and efficient delivery of power across communities and regions. We design, build, maintain, and upgrade high-voltage transmission infrastructure that supports the backbone of the electric grid. Whether working on new construction, line upgrades, or critical maintenance, our teams ensure projects are executed with the highest standards of safety, quality, and performance. Our work involves both traditional methods and the latest industry innovations to deliver sustainable, cost-effective, and reliable solutions for our customers. What You'll Do Perform, lead, and oversee all engineering responsibilities related to overhead transmission line design. This includes PLS-CADD modeling, line routing, structure analysis and loading trees, developing design criteria, sag-tension calculations, wire blowout, swing angle, damper Utilize AutoCAD, MicroStation, ArcGIS, and other CAD software for scaled drawings and mapping. Implement engineering redlines with precision and ensure accuracy before finalizing drafting/drawing. Conduct engineering calculations, including voltage drop, cable pulling, flicker analysis, and pole loading assessments. Prepare joint utility use authorizations based on field data and engineer redlines. Ensure compliance with local regulations, design codes (NESC, IEEE, ANSI, IBC), and construction standards. Perform quality reviews to check for inaccuracies, omissions, or compliance issues, and provide recommendations. Work collaboratively with engineers and project teams to develop solutions and modifications as needed. Maintain detailed project documentation and support engineering calculations. Work a minimum of 40 hours per week, with potential for up to 50 hours and occasional overtime. What You'll Bring Bachelor's degree in Civil/Structural Engineering from an ABET-accredited program. 2+ years of related experience with routing and design of high voltage overhead transmission line facilities Proficiency in AutoCAD, MicroStation, ArcGIS, or similar CAD tools. Experience with power distribution engineering software (PLS-POLE, TOWER, SAG10, LPILE, MFAD preferred). Understanding of design codes and standards such as NESC, IEEE, ANSI, IBC. Strong knowledge of engineering drafting and design principles. Ability to travel as necessary, up to 10% of the time What You'll Get Competitive Compensation 401(k) Retirement Plan Holiday Pay Paid Time Off (PTO) Comprehensive Health Coverage Pet Insurance Employee Assistance Program (EAP) Professional Development Tuition Assistance Employee Discount Program Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Johnson, Mirmiran & Thompson is a dynamic, 100% employee-owned consulting firm with more than 2,800 professionals, providing a full range of multidisciplinary engineering, architecture, information technology, and related services to public agencies and private clients throughout the United States. JMT is currently ranked #50 on Engineering News-Record's list of the Top 500 Design Firms. Position Summary: JMT is currently seeking a full-time Senior Geotechnical Engineer to join our companywide geotechnical design practice. This position is based in our newly relocated and growing office in the Easton area of Columbus, OH. This position will support a variety of project types including many high-profile projects across our company footprint in our highways, bridges, aviation, rail & transit, marine and ports, water and wastewater, dams and levees, and buildings and facilities markets. Some of our notable ongoing projects include Greendale Levee Greendale, IN; Long Bridge North in Washington DC/Northern Virginia; I-95 Electronic Toll Lanes and the Harry W Nice/Thomas "Mac" Middelton Bridge Replacement both in Maryland and Alexandria Waterfront Design-Build Improvements in Virginia. This position will also support highway and bridge projects throughout the states of Ohio and Pennsylvania for ODOT, PennDOT and other transportation clients. Essential Functions and Responsibilities * Responsible for management and oversight of geotechnical investigations * Development and implementation of subsurface investigation programs consisting of test borings, cone penetrometer, dilatometer and geophysical surveys * Perform engineering analysis of soils and rock, for design of shallow and deep foundation systems, slope stability, excavations, permanent and temporary retaining systems, dewatering systems and soil improvement * Preparation of geotechnical reports and memoranda * Preparation of construction documents including plans, specifications, and cost estimates * Responsible for responses to requests for qualifications and proposal * Assist in marketing efforts for growth and development of the geotechnical engineering practice in the Ohio and Pennsylvania Region * Conduct and manage on-site geotechnical inspection and engineering services during construction Nonessential Functions and Responsibilities * Perform other related duties as assigned Required Skills * BS degree in Civil Engineering with a concentration in geotechnical courses * 5 to 10+ years geotechnical engineering experience including analysis, report writing, and proposal preparation required * Experience with geotechnical software similar to or including gINT, SLIDE, SETTLE3, LPILE, ALLPILE, ReSSA, etc., and LRFD design * Propensity and proficiency for problem solving, both in the office and in the field, and have successfully developed innovative solutions to various geotechnical challenges * Work independently and as part of a team * Strong writing/verbal skills in order to work with team members, clients, and contractors * Perform field assignments which include, but are not limited to, walking and climbing through areas that have steep slopes or other natural obstacles * Candidates must be capable of working on multiple projects in a dynamic, fast-paced team-oriented environment * Coordination with clients, contractors, outside consultants and firm staff is expected * Excellent written and oral communication skills Required Experience Preferred Experience * MS degree in Geotechnical Engineering * Professional Engineer certification preferred. * Proficiency in MicroStation/CADD preferred. * Experience working on Federal, State, County and local projects including ODOT and PennDOT and Pennsylvania Turnpike Commission Working Conditions Work is performed within a general office environment 95% of the time. Work is generally sedentary in nature but may require occasional standing and walking. Lighting and temperature are adequate and there are no hazardous or unpleasant conditions caused by noise, dust, etc. within the office environment. Field work is required on occasion where work may be conducted outside in heat/cold, wet/humid, and dry/arid conditions. Some lifting (up to 25 lbs) may be required as needed. Benefits JMT offers outstanding opportunities for career and professional growth. We are 100% employee-owned (ESOP) and offer outstanding health care coverage and other benefits, including: * Affordable Medical, Dental & Vision Insurance * Company paid Life and Disability Insurance * Paid Time Off * Paid Holidays * Paid Caregiver Leave Program * 401K Retirement Plan (Traditional and Roth options) * Employee Stock Ownership Plan (ESOP) * Career Development Programs * And more… * Benefits | JMT Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or any other characteristic protected by state or federal law.

JobID: 210651949 JobSchedule: Full time JobShift: Base Pay/Salary: Washington,DC $152,000.00-$260,000.00; Brooklyn,NY $152,000.00-$260,000.00; Jersey City,NJ $152,000.00-$260,000.00 As an Assessments & Exercises Vice President in the Cybersecurity and Technology Controls line of business, you will contribute significantly to enhancing the firm's cybersecurity or resiliency posture by using industry-standard assessment methodologies and techniques to proactively identify risks and vulnerabilities in people, processes, and technology. Design and deploy risk-driven tests and simulations (or manage a highly skilled team that does) and inform analysis to clearly outline root-causes. In this role, you will evaluate preventative controls, incident response processes, and detection capabilities, and advise cross-functional teams on security strategy and risk management. JPMC's Assurance Operations organization is looking to expand its Cybersecurity Red Team with an experienced Social Engineering Operator specializing in phishing and vishing assessments. The primary focus of this role will be to perform and manage hands-on offensive security activities leveraging social engineering skillsets as part of Red Team engagements against critical JPMC assets. The successful candidate will have a proven track record in cybersecurity assessments, to include social engineering operations like phishing and vishing, and will be able to demonstrate a general knowledge of computer networking fundamentals, modern threats and vulnerabilities, attack methodologies, and testing tools related to social engineering. The Cybersecurity Red Team consists of highly skilled and qualified members who conduct advanced adversary emulation operations to replicate cybersecurity threats targeting the firm. This position is anticipated to require the use of one or more High Risk Role (HRR) systems, which mandates successful completion of enhanced screening, including criminal and credit background checks, before starting employment and annually thereafter. Job responsibilities * Perform and manage hands-on offensive security activities leveraging social engineering skillsets as part of Red Team engagements against critical JPMC assets * Continuously update and expand knowledge of emerging social engineering tactics, techniques, and procedures used by threat actors. Leverage expertise to conduct thorough social engineering assessments. Routinely provide subject matter expertise to enhance the firm's educational and training programs * Produce comprehensive reports detailing cybersecurity and social engineering vulnerabilities, threats, and mitigation strategies. Effectively communicate complex technical and social engineering-related information to diverse audiences, including senior leadership, through clear written reports and engaging visual presentations * Design and execute testing and simulations - such as penetration tests, technical controls assessments, cyber exercises, or resiliency simulations, and contribute to the development and refinement of assessment methodologies, tools, and frameworks to ensure alignment with the firm's strategy and compliance with regulatory requirements * Evaluate controls for effectiveness and impact on operational risk, as well as opportunities to automate control evaluation * Collaborate closely with cross-functional teams to develop comprehensive assessment reports - including detailed findings, risk assessments, and remediation recommendations - making data-driven decisions that encourage continuous improvement * Utilize threat intelligence and security research to stay informed about emerging threats, vulnerabilities, industry best practices, and regulations. Apply this knowledge to enhance the firm's assessment strategy and risk management. Engage with peers and industry groups that share threat intelligence analytics Required qualifications, capabilities, and skills * 5+ years of experience in cybersecurity or resiliency, with demonstrated exceptional organizational skills to plan, design, and coordinate the development of offensive security testing, assessments, or simulation exercises * Knowledge of US financial services sector cybersecurity or resiliency organization practices, operations risk management processes, principles, regulations, threats, risks, and incident response methodologies * Ability to identify systemic security or resiliency issues as they relate to threats, vulnerabilities, or risks, with a focus on recommendations for enhancements or remediation, and proficiency in multiple security assessment methodologies (e.g., Open Worldwide Application Security Project (OWASP) Top Ten, National Institute of Standards and Technology (NIST) Cybersecurity Framework), offensive testing tools, or resiliency testing equivalents * Experience planning and executing social engineering assessments, including phishing, vishing, smishing, pretexting, baiting, and other tactics * Understanding of human psychology, with a strong knowledge of psychological principles and techniques used to influence and manipulate human behavior * Excellent communication, collaboration, and report writing skills, with the ability to influence and engage stakeholders across various functions and levels * Ability to collaborate with high-performing teams and individuals throughout the firm to accomplish common goals * Broad experience in multiple businesses or verticals, with organizational and cultural understanding of call centers, payments processes, client service/sales organizations, and operational support staff * The ability to articulate and visually present complex technical and fraud subject matter to a wide and senior audience * Ability to analyze and produce reports about cybersecurity and fraud vulnerabilities, threats, designs, and procedures * Candidate should have the ability to perform targeted, covert security tests with vulnerability identification, exploitation, and post-exploitation activities Preferred qualifications, capabilities, and skills * Social engineering background (or intelligence, law enforcement, or similar experience) * Experience in data analysis and visualization, including dashboard development * Intermediate to advanced knowledge and hands-on experience with scripting, with a strong emphasis/proficiency in Python * Experience with AI/ML technologies and tools and operationalizing their use in Red Teaming (e.g., developing video and audio deepfakes, etc.) #CTC

Job Title: Design Engineer Employment Type: Full-Time Department: Engineering Axionova Engineering Limited is an established leader in the civil engineering industry, recognized for delivering innovative and reliable solutions across multiple sectors. Our team is driven by a commitment to excellence and a passion for designing systems that address complex challenges. We are excited to invite a Design Engineer to join our forward-thinking team to contribute to our ambitious projects and high standards of quality and efficiency Position Overview: Axionova Engineering Limited is seeking a knowledgeable and detail-oriented Design Engineer to join our engineering team. The ideal candidate will have a strong foundation in engineering, with a specialization in system design and process improvement. This role focuses on evaluating and optimizing our systems and equipment, designing new processes, and ensuring that engineering projects meet our standards for quality, cost-effectiveness, and functionality. Key Responsibilities: - System and Process Analysis: Review and assess existing systems and processes, identifying areas for improvement and recommending streamlining opportunities. - Equipment and Process Design: Evaluate current equipment and design new processes or systems that meet Axionovas needs in terms of output, cost, and quality. - Cost Reduction: Make informed recommendations on new systems or designs that could help reduce production and operational costs. - Project Collaboration: Partner with the engineering team to bring designs to fruition, ensuring that equipment and processes align with project requirements. - Project Management: Oversee installation projects, ensuring timely and cost-effective completion while maintaining efficiency and adherence to budgets. - Health and Safety Compliance: Ensure all designs and implementations align with health and safety guidelines, maintaining a safe work environment. - Goal Achievement: Work toward key performance indicators (KPIs) and objectives set by executives, aligning your work with Axionova's strategic goals. Qualifications and Requirements: - Educational Background: Bachelors degree (or higher) in Engineering or a related field. - Experience: Demonstrated experience in a similar design engineering role. - Technical Proficiency: Ability to read, interpret, and execute technical drawings and diagrams accurately. - Project Management Skills: Proven ability to effectively manage engineering projects, from concept to completion. - Analytical Skills: Strong analytical and problem-solving abilities, with meticulous attention to detail. - Communication Skills: Excellent written and verbal communication skills for clear documentation and effective teamwork. - Manufacturing Knowledge: Familiarity with manufacturing processes, machinery, and equipment. - Time Management: Ability to prioritize tasks and manage workload to meet deadlines. - Reporting Skills: Proficient in report writing, conveying project updates and recommendations effectively. Why Join Axionova Engineering Limited? - Opportunity to work with a team of industry leaders. - Competitive compensation and benefits package. - Commitment to continuous learning and professional development. - A role in shaping cutting-edge engineering solutions for various industries. Apply Today If you're a dedicated professional with a passion for engineering innovation and excellence, we encourage you to apply and become part of Axionova Engineering Limited's mission to set new standards in engineering.

**Brand:** Bob Evans Farms **Categories:** Engineering **Position Type:** Regular Full-Time **Remote Eligible:** No **Req ID:** 29681 **Job Description** **About Bob Evans Farms, Inc.** For over 75 years, Bob Evans Farms has delivered delicious, quick-to-table, farm-inspired food that makes mealtime a little bit easier and a lot more delicious. We're proud to be the No. 1-selling refrigerated dinner sides*, including many varieties of wholesome, feel-good favorites such as mashed potatoes and macaroni & cheese, sold in grocery stores across the country. We're also a leading producer and distributor of sausage and egg products including liquid eggs. In addition to our flagship Bob Evans brand, our product portfolio includes Simply Potatoes , Egg Beaters and Owens Sausage. Bob Evans Farms is based in Columbus, Ohio, and is owned by Post Holdings, Inc., a consumer-packaged goods holding company. For more information about Bob Evans Farms, Inc., visit *********************** . **Responsibilities** **Position Overview:** As an Industrial Services Engineer, you will contribute to engineering efforts across a broad spectrum of mechanical utilities with a focus on ammonia and refrigeration, boiler systems and wastewater systems. You will collaborate with crossfunctional teams and factory-level engineering groups to support capital projects, optimize utility systems, and ensure compliance with internal and external standards. Your work will support impact operational excellence and environmental stewardship across our facilities. **Accountabilities:** - Contribute to engineering support for mechanical utilities including steam, chilled water, cooling tower water, domestic water, compressed air, HVAC, refrigeration, and hazardous gases - Assist with wastewater management and ammonia cooling operations in industrial facilities - Support mechanical utility standards, design, project execution, and system performance - Participate in engineering design and review for capital projects including scopes of work, requests for quotes (RFQ), construction packages, and commissioning activities - Help ensure safe, reliable, and efficient operation of mechanical utility systems, with attention to minimizing environmental impact and resource consumption - Collaborate with factory-level Industrial Services teams including supervisors and technicians - Support compliance with federal, state, and internal standards from design through operation and maintenance - Research and recommend facilities, equipment, and technology improvements - Prepare technical analysis of facilities, technologies, and systems **Qualifications** **Experience and Education:** Education Level: - Bachelor's Degree required in engineering (or related field) or equivalent combination of education and experience. Experience: - 3-5 years of relevant experience in a manufacturing maintenance setting, with focus on industrial systems - Ability to travel to plant sites as required Skills: - Ability to work collaboratively and cohesively with employees at all levels - Strong interpersonal skills - Listening and informing others effectively; excellent negotiating and influencing skills at all levels both internal and external. - Ability to anticipate work needs and follow through with minimal direction. Must be a self-motivated self-starter. - Must possess the ability to always maintain external and internal confidentiality. Travel: - Ability to travel to plant sites as required, typically up to 50% Post Holdings provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, genetic information, marital status, status as a covered veteran and any other category protected under applicable federal, state, provincial and local laws. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

McGill AirClean, a subsidiary of United McGill, has about 50 years experience solving air pollution control problems for a large variety of industrial sources, including furnaces, boilers, incinerators, kilns and dryers, and providing pressure processing equipment such as autoclaves and vacuum dryers for many industries. The Associate will install, test, service and repair new and existing air pollution control systems and pressure processing equipment, such as autoclaves and vacuum dryers, and provide technical assistance and training to the customers. Qualifications include: two year degree in electrical engineering technology, working knowledge of PLC programming, electrical or electronics troubleshooting experience, excellent communication skills, and ability to work extended hours and travel approximately 40% to 60% anywhere in North America. The Company offers competitive pay and benefits including: medical/Rx drugs, dental and vision care, Health Savings Account (HSA), Paid Time Off (PTO) and paid Holidays, 401k Plan with Company matching contributions and paid disability and life insurance.

Application Deadline: 31 July 2026 Department: Civil/Municipal Employment Type: Full Time Reporting To: Mike McAvoy Compensation: $75,000 - $110,000 / year Description The Mannik & Smith Group, Inc. (MSG) is a people focused, award-winning, full-service consulting firm that offers a wide array of services including civil and geotechnical engineering, environmental consulting, planning, landscape architecture, agriculture, surveying and construction support. Our talented staff of 650+ professionals deliver integrated planning, design, engineering and construction solutions to our clients from our offices throughout Ohio, Indiana, Michigan, Pennsylvania, West Virginia and Alabama. Due to MSG's continued growth in our Civil/Municipal Division, a new opening is available for a Project Engineer in Columbus, OH! Key Responsibilities * Work in conjunction with licensed design professionals assisting with the design and preparation of a variety of public and private development projects, including commercial, industrial, residential, energy, water/waste water and community projects throughout the Midwest. * Coordinate with fellow MSG staff across a variety of service sectors including: Surveying, Geotechnical, Environmental, Structural, Traffic, Transportation, Site Construction, etc. * Perform and check various design calculations and performing various tasks as they relate to preparing a design package. * Preparing front end feasibility documents, due diligence reports and zoning studies, project development, storm water modeling and design, cost estimates and detailed design plans. Skills, Knowledge & Expertise * Practical experience in design and plan preparation of site development projects. * Bachelor's degree in Civil Engineering, Landscape Architecture or related engineering field * EI certification in the state of Ohio, with the ability to obtain PE or PLA certification within 6 to 12 months. * Experience with researching and applying various agency design standards to civil engineering projects to successfully achieve approvals. * Ability to apply guidelines and specifications. (i.e., City of Columbus and surrounding counties, ODOT, and etc.) * Proficiency with AutoCAD/Civil 3D grading and pipe networks as well as plan set preparation required. * Proficiency in independent preparation of Hydraulic/Hydrologic reports is preferred. * Roadway design and survey experience are a plus. * Utility design or utility field inspection experience a plus. * The ability to engage reviewing agencies while preparing technical designs and addressing comments is a critical part of our process. * The ideal candidate will be comfortable communicating and coordinating with review agencies. Pay & Benefits * 401(k) w/ company match * Health insurance * Health savings account * Vision insurance * Dental insurance * Flexible schedule * Life insurance * Paid time off * Referral program * Tuition reimbursement It is the policy of our company to follow equal employment opportunity procedures in compliance with federal, state and local criteria. We will provide all applicants for employment, and all employees, with equal opportunity without regard to race, color, religion, national origin, age, sex, height, weight, marital status, arrest record, disability, pregnancy, sexual orientation, gender identity or expression, genetic information, military or veteran status, and/or any other protected classes covered by any local, state and federal laws. #LI-CO1

Employment Type: Full-Time Schedule- Monday through Friday 9a to 5p About the Role This position supports Honda Interior Product Development, with a focus on automotive interior plastic components. The role is hands-on and design-focused, working directly with project managers, customers, and suppliers to develop high-quality injection-molded and blow-molded interior parts. Product Development Focus Plastic Injection Molded Parts Blow Molded Parts Fabric-wrapped, film, and painted components Typical Components Include: Console Boxes Glove Boxes Center Panels Instrument Panel (IP) Parts Visor Meters Air Outlets Interior Trim Components Primary Responsibilities Serve as a key design resource interfacing with Project Management on design specifications and development requirements Create and maintain 2D and 3D CAD designs using CATIA V5 / 3Dx V6 Design, surfacing, solids, wireframe, and section views Develop, document, and release Engineering Change Notices (ECNs) Prepare and participate in design reviews, including scheduling and reporting Support customer meetings and act as a technical interface with suppliers Support prototype builds and delivery to customers Provide APQP support throughout program development Support compliance with company certifications and programs, including: J-SOX TS16949 / IATF 16949 ISO 14001 Qualifications Experience (Preferred) Prior experience interfacing with Automotive OEMs Prior experience in automotive plastic injection part design using 3D CAD Education Four-year Engineering degree (or equivalent relevant experience) Requirements Physical & Work Environment Standard office environment Activities include keyboarding, sitting, walking, bending, and standing Ability to consistently meet department schedules and maintain flexibility with work hours as needed Equipment & Tools Daily use of computer systems and 3D CAD software Standard laptop and Microsoft Office Suite Ability to use gauges and other basic design-related equipment Technical & Cognitive Skills Working knowledge of automotive interior plastics and plastic injection molding (preferred) Ability to read and interpret assembly and engineering drawings Strong analytical and problem-solving skills related to design concepts and manufacturability IND2

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis is seeking an Instrumentation & Controls (I&C) System Design Engineer to join our Resilience Water team in our Detroit , MI location. This is an exciting opportunity for an I&C Systems Design Engineer, preferably with consulting engineering experience, to join our team and lead projects with a variety of I&C, automation system design, and SCADA integration. The selected candidate will be responsible for I&C and SCADA design and implementation services for diverse clients and projects for environmental remediation, industrial & municipal water and wastewater treatment, conveyance systems, and facilities. Role accountabilities: This role provides engineering and design services to produce design & construction documents for projects. They will coordinate with process, mechanical, and electrical engineers assigned to the project and prepare technical memorandums and develop design criteria, SCADA system architecture, process and instrumentation diagrams (P&IDs), SCADA network diagrams, process control functional narratives, control schematics, panel layout diagrams, and interconnection diagrams. Additional duties include: Support projects and clients in the planning, design and construction of water/wastewater facilities and other similar industrial facilities, serving as Arcadis' main point of contact with our clients for their I&C needs. Project Manager leading all facets of project, to include; budgeting, planning, cost estimating, design and execution of SCADA and instrumentation & control systems. Support electrical engineering and developing electrical design to support the I&C systems design. Conduct factory testing, site acceptance testing, field checkout, and startup of I&C and SCADA system startups. Utilize technical experience and expertise in the execution of I&C and SCADA projects from inception to successful startup and turnover. Program process control logic in PLCs and configure graphical HMI for SCADA system on a variety of platforms. Configure historical data collection, archiving and generating reports on a variety of platforms. Produce effective and accurate written specifications for implementing I&C and SCADA projects. Mentor junior engineers and designers. Required Qualifications: Bachelor's degree in Mechanical, Electrical, Chemical, Environmental Engineering or a closely related field of study 7+ years of I&C, Automation, and SCADA system design and implementation experience in water/wastewater market. Professional Engineer license or the ability to obtain license within 12 months. Key Skills and Attributes: Basic knowledge of Autocad and Revit. Ability to self-direct and work on multiple assignments at once while meeting project deliverable dates and completing other task-driven assignments Excellent communication skills, both oral and written, as well as excellent teamwork skills. Experience with Microsoft Office (Word, Excel, MS Project, and Outlook) Advance knowledge in applying instrumentation and controls to process and electromechanical equipment and developing SCADA networks. Knowledge of designing and developing fiber optic cable networks for SCADA systems. Advance knowledge of radio and cellular telemetry networks. Basic knowledge of IT and industrial networks. Valid driver's license and clean driving record. Willingness to travel (25%). Preferred Qualifications: 10+ years of experience in developing bid and construction documents PLC/HMI programming, configuration & startup experience Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $80,461 - $132,761. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-RT4 #Resilience-NA #Water-NA #Water-NA-D&E

Application Deadline: 31 July 2026 Department: Civil/Municipal Employment Type: Full Time Reporting To: Mike McAvoy Description The Mannik & Smith Group, Inc. (MSG) is a people focused, award-winning, full-service consulting firm that offers a wide array of services including civil and geotechnical engineering, environmental consulting, planning, landscape architecture, agriculture, surveying and construction support. Our talented staff of 650+ professionals deliver integrated planning, design, engineering and construction solutions to our clients from our offices throughout Ohio, Indiana, Michigan, Pennsylvania, West Virginia and Alabama. Due to MSG's continued growth in our Civil/Municipal Division, a new opening is available for a Project Engineer in Columbus, OH! Key Responsibilities * Work in conjunction with licensed design professionals assisting with the design and preparation of a variety of public and private development projects, including commercial, industrial, residential, energy, water/waste water and community projects throughout the Midwest. * Coordinate with fellow MSG staff across a variety of service sectors including: Surveying, Geotechnical, Environmental, Structural, Traffic, Transportation, Site Construction, etc. * Perform and check various design calculations and performing various tasks as they relate to preparing a design package. * Preparing front end feasibility documents, due diligence reports and zoning studies, project development, storm water modeling and design, cost estimates and detailed design plans. Skills, Knowledge & Expertise * Practical experience in design and plan preparation of site development projects. * Bachelor's degree in Civil Engineering, Landscape Architecture or related engineering field * EI certification in the state of Ohio, with the ability to obtain PE or PLA certification within 6 to 12 months. * Experience with researching and applying various agency design standards to civil engineering projects to successfully achieve approvals. * Ability to apply guidelines and specifications. (i.e., City of Columbus and surrounding counties, ODOT, and etc.) * Proficiency with AutoCAD/Civil 3D grading and pipe networks as well as plan set preparation required. * Proficiency in independent preparation of Hydraulic/Hydrologic reports is preferred. * Roadway design and survey experience are a plus. * Utility design or utility field inspection experience a plus. * The ability to engage reviewing agencies while preparing technical designs and addressing comments is a critical part of our process. * The ideal candidate will be comfortable communicating and coordinating with review agencies. Pay & Benefits * 401(k) w/ company match * Health insurance * Health savings account * Vision insurance * Dental insurance * Flexible schedule * Life insurance * Paid time off * Referral program * Tuition reimbursement It is the policy of our company to follow equal employment opportunity procedures in compliance with federal, state and local criteria. We will provide all applicants for employment, and all employees, with equal opportunity without regard to race, color, religion, national origin, age, sex, height, weight, marital status, arrest record, disability, pregnancy, sexual orientation, gender identity or expression, genetic information, military or veteran status, and/or any other protected classes covered by any local, state and federal laws. #LI-CO1

Danis is a third-generation, family-owned construction manager and builder with a long history of delivering complex, high-quality projects across healthcare, higher education, commercial, and industrial markets. Built on trust, integrity, and a commitment to people, we take pride in creating spaces that strengthen the communities we serve while providing rewarding careers for those who help us build them. As a Project Engineer at Danis, you'll play an integral role in helping deliver high-quality, well-coordinated construction projects from start to finish. You'll work closely with project managers, superintendents, designers, and subcontractors to ensure every phase of construction runs smoothly-on time, within budget, and according to plan. This position offers broad exposure to all aspects of the construction process, from field operations to project planning and documentation. At Danis, we're committed to helping our people build long-term careers. Through Danis University, you'll have access to training, mentorship, and professional development designed to strengthen your technical skills and prepare you for future leadership opportunities. Responsibilities What You'll Do: Project Planning & Coordination Assist the Project Manager and Superintendent in managing daily administrative and technical project activities. Develop and update project schedules, helping coordinate work among subcontractors, suppliers, and field teams. Participate in constructability reviews and site logistics planning to identify and address potential challenges early. Serve as a communication link between owners, designers, and field personnel, ensuring timely information flow. Support self-perform operations and subcontractor activities by monitoring progress and documentation through project management software. Quality, Safety & Field Support Verify that work meets design specifications, drawings, and Danis quality standards. Review submittals, RFIs, and shop drawings to ensure accuracy and compliance. Assist with layout verification and field coordination to resolve design or installation discrepancies. Support implementation of the Danis Safety Program by participating in safety audits, meetings, and pre-installation reviews. Help track inspections, testing, and quality control documentation. Cost & Documentation Management Help identify, document, and track changes to project scope and budget. Assist with processing submittals, change orders, and purchase orders. Maintain project logs and records, including drawings, submittals, RFIs, and field reports. Participate in project cost reviews and monthly audits. Collaboration & Relationship Building Build and maintain positive relationships with owners, architects, engineers, and subcontractors. Communicate clearly and proactively to keep teams aligned and issues resolved quickly. Contribute to a culture of teamwork, professionalism, and continuous improvement. Represent Danis with integrity and professionalism on-site and within the industry. Qualifications What You Bring Bachelor's degree in Engineering or Construction Management preferred. 2-5 years of construction experience (internship or full-time) with a general contractor. Familiarity with construction drawings, specifications, and project management tools. Strong organizational, communication, and problem-solving skills. A proactive, team-oriented mindset and interest in growing your career with Danis. Working Conditions You'll spend time both in the office and on active construction sites. Travel between regional offices may be required. Field work may include exposure to varying weather conditions and typical construction environments. Physical Demands Ability to climb ladders and scaffolds, lift up to 50 pounds, and remain on your feet for extended periods. Must have acceptable vision (with correction if necessary) and the ability to safely navigate job sites. Why Danis At Danis, our people are the foundation of our success. We invest in your development through Danis University, mentorship programs, and ongoing opportunities to expand your experience across diverse project types. We're proud to promote from within and support employees as they grow into new roles and take on new responsibilities. Why You'll Love Working Here You'll gain broad field experience across multiple projects and building systems. You'll work alongside talented builders and mentors who take pride in doing things right. You'll have access to ongoing training, technology, and growth opportunities. You'll join a company that values craftsmanship, teamwork, and continuous improvement. Competitive Total Compensation Annual merit increases and bonuses recognizing your growing expertise Profit sharing because your success drives our success Comprehensive Benefits Package Full health, dental and vision insurance for you and your family Short-term, long-term, and supplemental insurance coverage Life insurance for peace of mind Professional Development Danis University: 45+ training programs to advance your safety expertise Certification reimbursement and continuing education support Clear career progression paths within our growing organization Work-Life Integration Generous vacation and PTO policies Flexible spending accounts (FSA) and Health Savings Account (HSA) options 401K retirement planning Purpose-Driven Culture "Constructing Hope" community outreach program Work for a company that genuinely values safety over shortcuts Be part of a team that's building more than structures-we're building careers and communities Join a company where you can build exceptional projects-and a lasting career. EEO Statement Danis is an Equal Opportunity Employer. Danis does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. NO AGENCY CALLS OR SUBMISSIONS Danis does not accept unsolicited resumes from recruitment agencies. Any resumes submitted without a signed agreement will be considered the property of Danis, and no fees will be paid. #LI-ONSITE

Seeking a Staff Engineer to perform landfill construction quality assurance (CQA) and construction technician. This position may require travel and overnight stays including some weekends, depending on job site location. Most work is in Ohio. The Staff Engineer will start in the field, responsible for traveling to various solid waste facilities to perform on-site documentation/recording of daily activities, verifying the work contractors are doing is accurate, as well as soil testing to ensure it meets project specifications. This role can be trained and does not require prior experience. Must be comfortable living out of hotels for extended periods of time (not frequent, but occasionally expected). Will eventually move into more of an office-based role once the field work is mastered. Responsibilities: * Construction monitoring and documentation of construction activities at solid waste landfill facilities including field inspection and testing of soils and geosynthetic liners. On-site job training will be provided as necessary. * Responsible for assuring overall compliance with all applicable project specifications and construction drawings. * Supervise and complete construction quality assurance and construction quality control activities in several states, including the construction of landfill components and other environmental control systems. * Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g., soils, aggregates, concrete, asphalt, and steel). * Communicate with project managers, engineering technicians, client representatives, and contractor representatives regarding the construction site, project requirements, and testing, observation, and inspection results. * Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. * Tabulate, prepare, and submit data and observations in written and digital reports for daily transmittal to the Weaver Project Manager. * Maintain and clean equipment, vehicles, and work areas. * Adhere to strict safety standards. * Under close supervision of higher-level technicians or staff professionals, assist on tasks and perform basic testing and observation duties. * Provide clear documentation of findings and results. * Communicate information to the Project Manager and discuss the accuracy of data in preparation for submittal. * Submit documentation and communicate results as directed by the Project Manager. * Progressively assume increased roles of training and responsibility in work assignments. * Follow safety rules, practices, and other safety requirements for all projects. * Perform pre-task planning prior to executing work. * Report any safety issues or concerns to management. * Maintain quality standards on all projects. Skills civil engineering, blueprint, construction drawings, Engineering, materials testing, soil testing, Construction inspection, nuclear density gauge, landfill design, quality assurance inspection Top Skills Details civil engineering,blueprint,construction drawings Additional Skills & Qualifications * Civil Engineering degree is strongly preferred; will consider environmental engineering or construction related degrees * No working experience required; will provide on-the-job training in the field * Ability to read and interpret construction drawings * Ability/ willingness to travel full time and stay in hotels as required * Ability/ willingness to work outdoors in various weather conditions * On-site construction experience preferred * Soil sampling/ testing experience a plus * Ability to travel across Ohio and surrounding states Experience Level Entry Level Job Type & Location This is a Contract to Hire position based out of Dublin, OH. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Dublin,OH. Application Deadline This position is anticipated to close on Feb 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Business Unit: Final Product Technologies / Combination Product Medical Device Employment Type: Contract Duration: 1+ years with possible extension or conversion to FTE Rate: $33 - $37/hour Posting Date: 10/26/2024 Note: This role will mostly support different working shifts . 3 Key Consulting is hiring! We are recruiting an Engineer for consulting engagement with our direct client, a leading global biotechnology company. Ideal candidate: 2+ years of working experience. Knowledge of data analysis, CGMP documentation, and packaging equipment. Job Description: Position involves support of senior staff in the initiation, design, and delivery of projects, particularly for automation related scope. Employ basic engineering skills and practices to gather user requirements and translate them into technical documentation for execution by third party firms. Assist with project definition by performing engineering studies and assessment for automation system installations. Perform field evaluations of existing systems and provide engineering design recommendations. Schedule: This position should not exceed 40 hours a week but some overtime may be needed occasionally. On this role is required working hours flexibility as per Projects need. Extended and second shift will be required for period of time. Mon-Friday with possible occasional weekend shifts. (Candidates will be able to volunteer for weekend shifts). 10% travel may be required. Top Must Have Skill Sets: Experience in Pharmaceutical Packaging Operations. Commissioning, Characterization and Validation Experience Protocols Execution and reports generation Red Flags: Ideal Candidate: 2+ years of Pharmaceutical Packaging working experience. Knowledge of data analysis, CGMP documentation, and Packaging Equipment Validation. Interview Process: First stage phone interview after screening resumes. Second stage phone interviews with colleagues (1-3). We invite qualified candidates to send your resume to *****************************. If you decide that you're not interested in pursuing this particular position, please feel free to take a look at the other positions on our website ******************************* You are also welcome to share this opportunity with anyone you think might be interested in applying for this role. Regards, 3KC Talent Acquisition Team

Our Mission is to Identify, Hire, Train and Retain the very best people! Could that be you? Join the Ace Electric team for opportunities to work with the best team and build your career with Ace University! Since our inception in Valdosta, GA in 1975, Ace has been performing quality electrical installations in a full range of markets including: commercial, mission critical, education, healthcare, institutional, industrial, correctional facilities, hospitality, military bases, retail and others. In the past 15 years, locations have been added in Macon, GA, Atlanta, GA, Jackson, TN, Statesboro, GA, Sanford, NC and Plain City, OH. Ace offers fabrication services, hard bid, design-build, negotiated contracts and fee-based work. We have the resources, professional staff and project management team to handle almost any type of electrical project. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year and has no signs of slowing down! Benefits: * Health, Dental, Vision, Life, Disability, Accident and Critical Illness Insurances * 401k with Match * Access to Ace University: Apprenticeship Program, Leadership Training, Skill Building Classes and much more! General Summary: The Mission Critical Quality / Commissioning Project Engineer will be responsible for providing a high level of project-specific administrative support for the onsite Quality and Commissioning Team. The QCx Project Engineer will assist the onsite QCx Manager with the control and organization of product documentation and detailed phase-by-phase tracking. Preferred Job Skills: * Knowledge of building codes and regulations including Life Safety, BOCA, NFPA, NEC, and OSHA. * Must be able to read and interpret specifications, submittals, single-line diagrams and other contract documents. * Ability to work under pressure, while closely tracking QC details of multiple project activities. * Strong computer skills and familiarity with Construction Management software and Microsoft Office. * Strong verbal and written communication skills are required. * Ability to adapt to a fast-paced, hands-on, working environment. * Must have experience in a decision-making position, be self-motivated, and have an analytical mindset. * Experience collaborating with field and management to understand and implement technological and Quality programs. * Acute attention to detail and organizational skills. * Ability to maintain the required levels of confidentiality when entrusted with sensitive business, customer, or employee related information. * Able to maintain high levels of productivity, meeting deadlines while maintaining accuracy. * Effective and professional communicator, both written and verbal. * Able to maintain a pleasant customer service attitude while under pressure. * High level of professional business acumen. Mandatory Hiring Requirements: * References, Background Check, Drug Screen Testing, Valid Driver's License. Responsibilities: * Drive a quality culture that embraces "Implement Quality from the Start" and coach continuous learning approach that improves project efficiency and quality. * Identify areas for improvement while implementing best practices to enhance operational efficiency and reliability. * Assist investigations into quality-related incidents, conduct root cause analyses and implement corrective actions, establishing preventative measures to minimize future incidents. * Assist in the verification and documentation for all Owner Furnished Contractor Installed (OFCI) equipment, ensuring the conformance with the approved submittal while adhering to the Equipment Protection Plan. * Engage with the construction team and QCx team to support Foreign Objects and Debris (FOD) inspections prior to Energization on MV / LV SWGR, MV / LV XFMRs, Panelboards etc. * Assist onsite QCx team with administrative support as needed. * Participate in required daily, weekly, and monthly meetings (i.e., daily Cx, scheduling, coordination, pre-energization, and staffing meetings). * Assist in the coordination of the First Time Energization (FTE) documentation process from start to finish. * Identifies potential quality issues from review of construction submittals / specifications. * Analyzes upcoming tasks and anticipates equipment installation standards, checklist procedures and training. * Conduct regular audits and assessments of processes, systems, and documentation to ensure adherence to quality standards. * Manage all project issue logs and punch lists collaborating with all affected and / or responsible parties to mitigate and drive to closure any open issues. * Audit Quality Reports documenting field discrepancies and audit findings while coordinating corrective actions. * Ascertain information regarding changes to regulations that could impact Mission Critical operations. * Identify and assess quality risks associated with Mission Critical operations. * Manage / track certain OFCI equipment while communicating status with the construction team. * Develop / conduct training pertaining to topics in relation to electrical systems, components, and/or departmental specific. Position Requirements: * License: None required. * Certification: None required. * Education: High School Graduate or GED required. * Experience: Minimum of 1-5 years' electrical construction, Quality Control, or Commissioning experience required. Working Conditions: * Job requires working in all elements, depending on job location, time of year, heat, cold, rain, or snow. * Must be able to utilize construction site sanitary facilities (Porta-Johns). * Work from all types of ladders and be able to transport/relocate ladders unassisted. * Employee's personal weight with tools cannot exceed the rated weight capacity of ladders used. * Perform work at various heights, up to 90 feet from ladders, scaffolds, aerial lifts, cat walks and other safe work areas. * Work in restricted areas (switch gear-room, manholes, utility tunnels and crawl spaces). * Wear personal protective equipment as required. * Able to work 40 hours per week plus overtime as required, including the possibility of night shifts. Required Physical/Mental Functions: * Positively identify colors of wire and other items as required. * Must have the ability to safely use the required power tools and test equipment. * Must be able to safely operate equipment (lift trucks, aerial lifts, etc.). * Comprehend and practice safe work procedures as outlined in Safety Handbook. * Operate company trucks with manual and automatic transmission. * Read and interpret maps, manuals, work site directions, and written instructions. * Operate and work from mechanical personal lifts (electric or gas powered). * Must hear and see well (either natural or with correction). * Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead. * Able to lift objects weighing up to 50 pounds, with frequent lifting and carrying of objects weighing up to 20 pounds. * Tolerant to prolonged standing and movement on foot. * Climb ladders (all types). * Complete overhead work for extended periods of time. * Repetitive use of arms, hands, and fingers. AAP/EEO Statement: Ace Electric, Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identification, national origin, disability status, protected veteran status, or any other category protected by federal, state, or local law.