Designer jobs in Gainesville, FL

NV5 (NASDAQ: NVEE) provides engineering and consulting services to public and private sectors, delivering solutions through five business verticals: Construction Quality Assurance, Infrastructure, Utility Services, Program Management, and Environmental. With offices nationwide and abroad, NV5 helps clients plan, design, build, test, certify, and operate projects that improve the communities where we live and work. We are looking for a SR. CADD Designer to support the Land Development group. We work in a studio atmosphere where collaboration, flexibility, and self-motivation are important. Responsibilities Responsibilities Prepares, checks and reviews of working plans, detail drawings and specifications for layout and construction of site and underground utilities while under direct supervision of the CAD manager, Civil CAD lead, project engineer or project manager Development of 2D and 3D construction/layout drawings for site grading/drainage/permit drawings Coordinate Civil designs with Mechanical and Electrical/I&C disciplines Review and compare Civil subcontractor drawings against base models for accuracy and completeness Makes any adjustments or changes necessary or desired Maintain or develop new project drawing files for all related drawings in accordance with company standards and procedures Understand and follow standard CAD practices and procedures Uses (CAD) equipment and software. Proficient in both 2D & 3D CAD drafting as well as AutoCAD Civil3D While this position is primarily a CAD position; exposure to the following will be beneficial: Field survey, Total Station or Transit (Auto level) experience, Site Plan Development, Construction Layout Will be working in a collaborative environment made up of landscape architects, surveyors, MEPs, and contractors. A short exhibition of the candidate's civil 3D capabilities will be required Qualifications Specific Knowledge & Skills Knowledge of AutoCAD Civil3D Design software MS Excel Spreadsheet software MS Word Processing software Education and/or Experience Seven to ten (7-10) years related experience and/or training; or equivalent combination of education and experience Work environment and physical demands of this position The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the organization), reasonable accommodations will be made to enable individuals with disabilities to perform essential job functions. This position will be subject to indoor and outside environmental conditions, including weather conditions such as wet and /or humid environments, extreme cold and/or heat, dusty and noisy work environments. Work will primarily be in the field involving long term standing and frequent walking as well as include common hazards at construction and project sites. Must be able to carry, lift and push/pull up to 30 pounds frequently and up to 50 pounds occasionally. Must be able to walk over rough and uneven terrain and be able to stand up to 10-12 hours a day on occasion. Must have the ability to see, smell, hear, talk, climb, balance, stoop, kneel and twist, crouch, crawl, reach, grasp, sit, stand, and walk. Weekend and overtime work and/or overnight work and travel may be required. Additional physical duties may be required as necessary. NV5 offers a competitive compensation and benefits package including medical, dental, life insurance, PTO, 401(k) and professional development/advancement opportunities. NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.#LI-Onsite

Job Details OC - Ocala, FL Full Time MarketingDescription The Creative Designer is a creative professional responsible for designing and developing visually appealing, user-friendly, and functional websites while also having a strong understanding of marketing strategies. They will collaborate with designers, developers, and content creators to ensure that websites meet client objectives, engage target audiences, and achieve desired results. The Creative Designer will also be responsible for executing visually compelling marketing campaigns that capture the essence of the brand and drive engagement across multiple channels. Essential Duties and Responsibilities The following statements describe the principal functions of this position and the scope of responsibility but should not be considered an all-inclusive listing of work requirements. Individuals may be expected to perform other duties as assigned, including working in different areas to cover absences or balance the workload. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Gather information about the client's business, target audience, and industry trends to inform design decisions. Create graphics, icons, and other visual elements that enhance the website's appearance and user experience. Assists in creating and maintaining consistency in all web-based advertising campaigns, identities, and web processes Assist in the development and execution of creative strategies that align with the marketing objectives and enhance brand awareness. Collaborate in creative sessions for project kick-offs. Assists in maintaining, updating, and enhancing company websites Maintains archives of all previous work Generate innovative design ideas that align with the client's brand identity and messaging Proficiency in design software Adobe Creative Suite with emphasis in Dreamweaver, Photoshop, Illustrator, Figma, Sketch, and or Canva. Strong understanding of WordPress with the ability to effectively utilize its features to create and manage websites. Develop basic outlines and interactive models of the website's structure and layout. Assists in the maintenance of the department color printer Takes photos/videos as needed of models, classes, employees, and residents for use on websites, brochures, and other collateral Create eye-catching video content that highlights the amenities, guest experiences, and event highlights, optimized for social media channels. Ensure that websites are optimized for various screen sizes and devices, including desktops, tablets, and smartphones Work closely with developers to implement design concepts and ensure seamless integration of design elements into the website's code Regularly update and maintain websites to address issues, implement new features, and ensure ongoing performance Keep informed about the latest web design trends, technologies, and best practices. Meets the expectations and requirements of internal and external customers Establishes and maintains effective relationships and gains customers' trust and respect Develops positive working relationships with customers through responsiveness and delivery of accurate, timely, and effective services and acts with customers in mind Exhibits effort and follow-through in resolving customer problems and needs promptly and keeps customers frequently abreast of development and status of the issue Brings resolution to issues on a timely basis and within policies or established standards Anticipates the needs of users and ensures these needs are taken into consideration when completing assignments Uphold and evolve the company's brand identity, ensuring all creative works reflect values, mission, and brand. Collaborate with the marketing team to conceptualize and execute creative campaigns that promote the company's offerings, including special events and promotions. Design and produce high-quality visuals for digital and print advertising, ensuring all creative elements align with the marketing strategy and brand identity Ensures that quality outcomes and timely work are delivery Informs management of any changes, potential problems, or outstanding issues Collaborates with team members within the department and companywide Work closely with cross-functional teams, including Sales, Events, and Operations, to align marketing efforts with overall business objectives. Present creative concepts and strategies to senior management incorporating feedback as needed Report any incident or accident to the Manager/Director. Informs manager of any issues. Presents self professionally and displays discretion at all times Performs all duties in adherence to OTOW standards Strives to maintain a safe working environment through the prevention of accidents, the preservation of equipment, and the achievement of safe working practices Maintains a positive and professional demeanor toward all residents, visitors, and co-workers Performs other duties as assigned Qualifications Education and Experience: Associate's Degree in Web, Marketing, Communications, or Graphic Design required; Bachelor's Degree preferred 2+ years of experience in web design and maintenance required 2+ years of experience in creative design or marketing role required Portfolio that fully illustrates talents, abilities, and work experiences preferred Print and web design capabilities: must know how to work in both media for integrated campaigns. Prior website development required Experience in Adobe Creative Suite with emphasis on Adobe Photoshop, Adobe Dreamweaver, and Adobe Illustrator required Experience in Apple iMovie or Adobe Premiere, preferred Skills and Knowledge: Must be able to read, write, and understand English and have superior written, verbal, and interpersonal communication skills with a solid ability to write compelling and persuasive copy Bilingual (Spanish) preferred but not required PC proficiency is essential Microsoft Office skills required, including Adobe Creative Suite and WordPress Familiarity with Facebook, Twitter, and other relevant social media platforms Photography experience beneficial Ability to conceptualize verbal directions and ideas Ability to troubleshoot and offer solutions to problems Ability to respond well to constructive criticism Excellent organizational and time management skills Ability to multi-task, meet deadlines, and prioritize duties in a fast-paced environment Must possess a thorough understanding of interactive communications and delivery systems, processes, and user interface design as well as industry best practices. Knowledge of layouts, graphic fundamentals, typography & limitations of the web; must have the ability to storyboard or translate ideas to designers and develop innovative motion graphics solutions. A strong working knowledge of design, brand development, interactive commerce, and creative process. Personal Attributes: Creative and innovative thinker Strong interpersonal skills Honesty and integrity Self-starter Inquisitive, detail-oriented Team player Continual learner, open to change Commitment to diversity, equity and inclusion Colen Built Development provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Colen Built Development will provide reasonable accommodations for qualified individuals with disabilities. Drug free work place.

Full-time Description As the Assistant Design Manager at the National Center for Construction Education and Research (NCCER), you play a key role in our fast-moving Product Development team. Your knowledge, skills, and expertise help you transform highly technical content into an approachable, visually engaging learning experience. You quickly build rapport, incorporate stakeholder input, and easily communicate your vision to a highly collaborative and supportive team. You are a creative problem-solver who can envision multiple paths to success given time and budget constraints. NCCER is looking for a committed, smart, creative, tech-savvy graphic designer with experience developing educational materials for high school and adult learners, as well as managing direct reports. As the NCCER Assistant Design Manager, your leadership will help us develop materials used around the world to train construction craft professionals at high schools, vocational schools, colleges, and construction training centers. Key Responsibilities Provide hands-on design support and guidance to the design team to produce NCCER educational materials according to current specifications, layout standards, style guides, and best practices for print and electronic publication, in collaboration with the Art & Design Manager. Assist in managing day-to-day design operations, including scheduling, task assignments, resource allocation, and quality control. Supervise, train, and develop line reports to grow each person on their professional journey with NCCER and help them be successful in their respective roles. Collaborate with the internal cross-functional teams, including editorial, technical writers, artists, permissions, and project managers to ensure materials are ready on time and meet for the specifications for publication. Liaise with stakeholders in other departments and external partnerships to ensure fluid communication and establish a clear understanding of requirements. Utilize XML and a CSS to create, structure, and style content for automated workflows and digital publishing platforms, ensuring consistency, compliance, and interoperability. Collaborate to plan, develop, test, and troubleshoot our XML-based processes against the, ensuring that our applications of these tools are being used most optimally for our products. Perform quality control (QC) checks of the team's work to ensure quality standards are met throughout production cycle, offering constructive feedback and assistance to improve when needed. Develop and improve design templates, graphic elements, and styles, in collaboration with the Art & Design Manager. Assist with cover design and cover photo selection. Contribute to in-progress workflow project by suggesting adjustments to improve efficiencies and to ensure content quality. Stay current with design trends, publishing technologies, and accessibility standards. Develop a thorough knowledge of and work in accordance with NCCER's production processes and specifications. Other duties as assigned; as this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Requirements B.A. in Graphic Design or related 3+ years of graphic design experience in a book publishing context 1+ years of line management experience Thorough knowledge of the Adobe Creative Suite, particularly InDesign, Photoshop, and Illustrator Proficiency in Microsoft Office Suite (including Word and Teams) Working knowledge of print and ePub production workflows Knowledge of DAM systems, such as Aprimo, preferred Experience with Oxygen XML and employing XML-based publishing workflows Effectively organize, manage, and maintain multiple concurrent projects Work independently and collaboratively Excellent communication and time management skills Dependable in attendance and performance NCCER is an equal opportunity employer. No one shall be denied employment or opportunity based on race or color, sex, age, national origin, religion, physical or mental disability, veteran's status, marital status, gender identity or sexual orientation. NCCER also provides reasonable accommodations to individuals with disabilities and bona fide religious beliefs, provided that such accommodation does not constitute an undue hardship on the Company.

Job Description WHY JOIN THE AMES COMPANIES We have amazing Benefits! Medical, Dental, Vision, Life Insurance, Wellness, 401K, Holidays Employee Assistance Program, Vacation Days, Disability, and much more. WHO WE ARE The AMES Companies, headquartered in Lake Nona-Orlando, FL has a rich American history. The AMES story goes back to 1774, when Captain John Ames began making America's first shovels. AMES brand is the third oldest consumer brand in the country, and its tools helped build America for more than two hundred years. You can learn more about our history here. Our business lines include Home Organization, Lawn and Garden Tools, Outdoor Living, and Cleaning Tools. Our leading global brands are sold to homeowners and professionals involved in new construction, remodeling, and maintenance activities. To learn more about our business lines, visit our website: ********************************** WHO YOU ARE As the Design Specialist, you will demonstrate a high level of customer service while working with our customers to collaborate and design home organization projects in a timely and professional manner. You will have an eye for spatial, utility, and color scheme design visualization, with excellent product knowledge. Experience and skill in designing ClosetMaid products is a plus. Must be a great communicator who can interact with clients, design closet systems, present ideas, and close the sale. We are focused on exceptional customer service and attention to detail. WHERE YOU WILL WORK Our ClosetMaid world headquarters in Ocala is a 600,000 sq. ft. manufacturing and office facility. We will provide all the equipment needed to be successful in your job. WHAT YOU WILL DO Provide after and after-sales support to consumers via phone and email. Before Sales Support - Product, Pricing, Design, and ‘Where to Buy' information. Ask open-ended questions about customer's projects to determine their needs. Provide aesthetic and efficient creative design suggestions based on information provided by the Customer. Provide exceptional customer service through active listening. Recommend the proper parts and quantities needed for installation. Utilize resources to walk through customers with their design solutions. Provide accurate and complete drawings for job requests made by Architects, Designers, Builders, and Contractors for bid submittals. Assist Builders in creating upgrade solutions by creating builder books based on their requirements. Log and update customer information gathered during consultations and follow up with the essential information. Escalate problems that are unable to be resolved on the spot through proper channels. Prepare status reports, including activity, closings, follow-up, and adherence to goals. Be trained in both consumer and pro building division product design. Establish and maintain a positive relationship with current and potential clients. Perform follow-up communication activities via phone, email, and chat. REQUIREMENTS A High School Diploma or GED is a must. Trade school degree in design preferred. 1-2 years of interior design support and visualization experience preferred. Experience in customer service and/or inside sales. Knowledgeable in basic computer skills (MS Office, MS Excel, Outlook, etc.) Strong verbal and written communication. Bilingual in Spanish is a plus. Thrive in a fast-paced team environment. Stay calm under stressful situations. Attention to detail and accuracy. Able to perform basic math functions and calculate dimensions, and amounts. Ability to interpret instructions furnished in written, oral, diagram, or schedule form and perform critical reasoning. Stay current on design trends. Sales and Design Software skills, a plus (Salesforce, LiveStorage, Read Blueprints, CAD). Experience and skill in designing ClosetMaid products are a plus. Compensation: $17.00/hr PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or listen, type and use a mouse. The employee frequently is required to sit. The employee is occasionally required to stand and walk. The employee may occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. WORK AUTHORIZATION The Ames Companies will only employ those who are legally authorized to work in the United States.

The Opportunity: Gemini Water is looking for a dynamic full time Mechanical Designer (2D and 3D CAD) to join our multi discipline team at our Gainesville Florida office. The ideal candidate will be developing systems in the expanding industry of water and wastewater treatment. Job Responsibilities: Assist in the design of water and wastewater treatment systems. Assist in design of plumbing layouts, detail design drawings, component selection/sourcing, and pump sizing. Assist in SolidWorks, MicroStation, and AutoCAD detail drawings. Ability to generate fabrication drawings and coordinate with shop staff on revisions. Ability to generate schematics in SolidWorks and (MicroStation when needed). Ability to coordinate with teams on site for RFIs if needed. Assist in site work when required could include international travel. Key Qualifications, Education, and Skills: Degree in Mechanical Engineering from an accredited school (preferred not required). Minimum 5 years of experience in industrial product development and configuration management. Experience with 3D modelling and drawings in SolidWorks, or similar 3D CAD system. Experience with 2D modelling and drawings in SolidWorks, or similar 2D CAD system. Experience in pump sizing and selection and hydraulic system design. Familiarity with welding design and specifications. Experience in any of the following areas is considered an asset: plumbing design and P&IDs, pump selection and sizing, welding design, welding fabrication drawings, water and wastewater design. Knowledge of electrical design is a plus but not required Extensive experience generating/checking production ready engineering drawings. Experience with SolidWorks PDM is considered an asset. The ability to interact, be able to work in a project team environment with all types of clients and teammates; proactive and able to manage time well; able to build relationships. Travel and periods away from your normal place of work may be required. A valid driver's license is required and current passport or ability to obtain a passport is preferred. About Gemini Water LLC: Gemini Water, LLC (GWL) brings over 80 years of combined experience in the water, wastewater, and distribution industries. Since its founding in 2015, GWL has become a leader in water management, offering customized solutions that meet the ever-changing needs of our diverse clients. Our company is committed to sustainability and operational efficiency, using advanced technologies and strategic partnerships to deliver end-to-end water management services across various regions. From designing and fabricating desalination systems to offering comprehensive wastewater treatment solutions, GWL's expertise spans the entire spectrum of water-related challenges. With a dynamic, talented and innovative team, GWL ensures that we remain at the forefront of the water and wastewater treatment industry. We are dedicated to providing our customers with cutting-edge and high-quality solutions for all their water treatment needs. Gemini Water is an equal-opportunity employer. We base hiring, training, development, and promotions on the skills, knowledge, and experience needed to perform the job. All applicants must be legally authorized to work in the United States. We appreciate all applicants for their interest, though only those selected for further consideration will be contacted.

Job DescriptionBenefits: Company parties Competitive salary Employee discounts Paid time off Training & development Benefits/Perks Competitive Compensation Paid Time Off Career Growth Opportunities Job Summary We are seeking a talented Seasoned Graphic Designer to join our team. In this role, you will create designs that capture the attention of our target audience and communicate our brand messaging. Your responsibilities will include determining project requirements and budget constraints, presenting rough drafts to the client, and working in collaboration with them to create the finished product. The ideal candidate is highly creative with a strong portfolio and a passion for the work. You must be able to work in a fast-paced environment, and be able to design projects in a timely manner. We specialize in vehicle wraps and we also do marketing materials such as signage, business cards, trifolds, etc. We would like to find someone who has a background designing those services we offer. THIS IS AN IN PERSON POSITION, WILL NOT BE ACCEPTING ANY CANDIDATES WORKING REMOTE. Responsibilities Communicating with customers Understand the scope and requirements of each specific project Create a schedule of project milestones Prepare rough drafts and present them to clients Refine design using computer software Qualifications Bachelors degree in Design or a related field is preferred Previous experience as a Graphic Designer or in a similar role is preferred A strong portfolio of published works Skilled in Adobe Suite, exclusively Adobe Illustrator. Highly creative with an eye for detail Ability to stay organized Ability to work on multiple designs at once Must be a seasoned graphic designer

The World Equestrian Center located in Ocala; FL is currently seeking a Lead Graphic Designer to join our team! The Lead Graphic Designer plays a critical role in shaping and stewarding the visual identity of both our luxury resort offerings and our equestrian and sport programming. This role not only creates best-in-class design work but also provides creative leadership, formally managing other graphic designers. The ideal candidate brings proven high-level experience in luxury branding, a strong portfolio spanning both print and digital, and the ability to pivot between distinct brand voices while maintaining a cohesive presence under a larger umbrella brand. Experience in developing brand identities, luxury logos, and launching new brands is required. This is an on-site position based at World Equestrian Center - Ocala, supporting the resort/hospitality verticals (hotels, dining, retail, and spa), horse shows, special events, and sports programming. Primary Responsibilities: Design and produce a wide range of high-impact creative materials, with a strong emphasis on digital advertising and campaign-driven marketing assets. Lead the development of new brand identities, including logos, luxury-focused visual systems, collateral templates, and comprehensive style guides. Steward and evolve existing brand identities, ensuring cohesion across all platforms and sub-brands. Collaborate closely with marketing leadership to ensure all creative output supports and enhances strategic campaigns, business objectives, and revenue goals. Concept and execute a variety of deliverables, including: Digital and print advertising Social media graphics and promotional assets Email and web graphics Signage and event branding Menus, brochures, presentations, and internal materials Sales collateral Ensure all design outputs are consistent with brand guidelines while adapting visual tone for distinct sub-brand audiences (for example: luxury hospitality vs. equestrian sport). Stay current with design and marketing technology, including AI, digital signage, paid media, and UX considerations to ensure WEC creative remains innovative and effective. Oversee, mentor, and guide one or more graphic designers, including formal management responsibilities and art direction. As needed, support light motion graphic design needs for digital and social channels. This job description in no way states or implies that these are the only duties to be performed by the associate occupying this position. Associates will be required to perform any other job-related duties assigned by their supervisor. This document does not create an employment contract, implied or otherwise, other than an "at will" employment relationship. Qualifications, Education, Experience, Skills, and Abilities: 7+ years of professional experience in graphic design, with at least 3 years in a senior or lead role. Proven, high-level experience in luxury branding is required, with a portfolio that demonstrates expertise in logo creation, brand identity systems, and visual storytelling for luxury, lifestyle, hospitality, or resort brands. Demonstrated success in overseeing and mentoring other designers, providing direction, feedback, and elevating team-wide creative output. Expertise in Adobe Creative Suite. Bonus if proficient in motion/video tools such as After Effects and Premiere. Strong understanding of layout, typography, color theory, and production across both digital and print mediums. Proven ability to design across multiple channels, with an emphasis on digital advertising and conversion-driven creative. Experience leading brand launches, from concept to full rollout across marketing materials. Collaborative mindset and strong interpersonal skills, a positive, solution-focused team player open to feedback and committed to continuous improvement. Exceptional attention to detail, organizational skills, and the ability to manage multiple projects in a fast-paced environment. Experience with equestrian sport is a plus but not required. Portfolio Requirements: Applicants must submit a portfolio demonstrating: At least 3 examples of luxury brand identity systems At least 5 examples of logo creation projects At least 2 campaigns that demonstrate digital ad performance or ROI Advertising and campaign creative Hospitality, resort, or lifestyle branding Event marketing and signage Multi-channel, brand-consistent design World Equestrian Center is managed by Columbus Hospitality Management, a company committed to providing quality service and memorable guest experiences in a positive and welcoming work environment. We are focused on supporting the needs of our team through our commitment to the family/work-life balance and by providing development opportunities. We are proud to be a Drug-Free Workplace/EOE. All applicants will be required to submit a background check prior to employment.

World Equestrian Center (WEC) defines the standard for premier equestrian destinations, bringing together world-class sport and exceptional hospitality. Family-owned and professionally operated, WEC reflects a deep passion for equestrian sport in the United States. Across our properties, state-of-the-art indoor and outdoor venues are complemented by elegant lodging, refined dining, exceptional shopping and curated experiences. Dedicated to great sport, good fun, and a welcoming, family-friendly environment, WEC continues to grow with a steadfast commitment to Quality. Class. Distinction. This position is located at our Equestrian Center in Ocala, Florida. Successful candidates will play a critical role in shaping the design direction of enterprise software and applications that support WEC's leadership in equestrian sports and the hospitality industry. This role will lead UX research, analysis, and design efforts to craft intuitive, visually compelling, and user-centered digital experiences. You'll collaborate closely with software engineers and business stakeholders to rapidly understand business requirements, compile UX analysis material, and produce designs to support the application development lifecycle. Essential Duties and Responsibilities: Lead UX design efforts from concept to delivery, ensuring consistency across multiple applications. Conduct user research, usability testing, and data analysis to inform design decisions. Create wireframes, prototypes, and high-fidelity designs that effectively communicate concepts. Collaborate with engineering and product teams to ensure seamless implementation of designs. Establish and maintain design systems, style guides, and best practices. Qualifications 6+ years of professional UX design experience with a strong portfolio showcasing application projects. Proven experience leading design projects and mentoring other designers. Proficiency in design and prototyping tools (e.g., Figma, Sketch, Adobe XD). Strong understanding of user research methodologies and usability testing. Excellent problem-solving skills and a passion for creating exceptional user experiences. Strong verbal and written communication skills. Highly organized, independent, and able to interact with individuals from multiple disciplines. Bachelor's degree in design, human-computer interaction, or a related field. Nice To Haves Experience designing enterprise software applications from concept to implementation Experience with mobile-friendly design patterns Familiarity with front-end technologies (HTML, CSS, JavaScript) to communicate effectively with developers and/or contribute directly to UI and design system implementation. Knowledge of accessibility standards (WCAG) and inclusive design practices. Experience with analytics tools to measure and optimize user experience. Background or interest in equestrian sports. What You'll Love Being a key member of a mission-driven team that values autonomy and technical excellence. Work on challenging problems with a high degree of ownership. We offer a comprehensive benefits package that includes medical, dental, vision, life, a 401(k) retirement plan and free vacation lodging at our employee resorts in Daytona Beach, FL, Big Bear Lake, CA and Pigeon Forge, TN.

Description To provide complex instrumentation and control (I&C) and electrical engineering technician services to assist in attaining the goals of plant reliability, efficiency, safety and environmental compliance in the most cost-effective manner. Qualifications and Education Requirements Graduation from standard high school or State Department of Education or graduation from United States Armed Forces Institute. Associate of Science or an Associate of Arts degree preferred. Eight (8) years of experience in large, modern power plants (or applicable equivalent training and education) dealing with the construction, operation and maintenance of electrical and instrumentation and control systems. Experience must include the development of technical specifications, economic studies, evaluation and analysis, or complex technical problems. Practical experience in and working knowledge of complex distributed control systems (DCS). Familiarity with NERC standards and procedures is preferred. Core Competencies : Adaptable, Collaborative, Conscientious, Critical-Thinking, Outcome-Driven and Professional Technical Competencies/Skills : Engineering technician abilities Problem analysis Analytical thinking Knowledge of power plant design, operations and construction Plant operations Project planning and coordination Proficiency with Microsoft Office applications Soft Competencies/Skills : Effective verbal/nonverbal, listening and written communications Result-oriented Organization Attention to detail Multi-tasking Essential Functions Detailed planning of equipment or process evaluation, testing and monitoring programs up to three years into the future. Reviews proposed design modification developed by peer group within the department to ensure the completeness and applicability of the design. Conducts design studies for Instrumentation and Controls process systems or equipment. Prepares technical specifications, pricing documents, bidder's lists, bid evaluation criteria and project cost estimates for process systems, equipment or maintenance projects. Assists other department technical staff on technical/engineering design criteria. Works with technical staff and/or Engineering Supervisor to conduct analysis of complex plant operation or maintenance problems which could lead to design changes, alternate equipment selection, different operating practices or a combination there of. Makes recommendations based on the analysis results. Conducts economic evaluation associated with equipment proposals or alternative practices. Responsible for reviewing and commenting when assigned the lead responsibility for an analysis or evaluation. Conduct operating or maintenance feasibility studies of complex electrical/I&C engineering conditions and systems. Acts as a technical advisor to both the plant operation and maintenance groups. Conducts analysis of control systems, instrumentation, and electrical equipment failures to determine the source and preventative action. Assists the DCS Administrators in troubleshooting and makes recommendations as to changes to the DCS systems. Coordinates activities of outside consultants as assigned. Take a proactive approach regarding personal safety, safety of others and comply with all OSHA and SECI safety rules. Must complete all necessary online or classroom safety courses as directed. Must participate in safety briefings and meetings. Take a proactive approach regarding environmental rules and regulations governing the operation of the plant. Must complete all necessary online or classroom environmental courses as directed. Required to immediately report any, and all, environmental reportable incidents. Performs NERC Compliance Program roles if/as designated in Seminole's Standard Ownership Matrix (SOM) including ongoing evidence retention in “audit-ready” form as applicable and directed. You should also be familiar with Seminole's Enterprise Internal Compliance Program (ENT-GCD-RGC-EP-054) to further your understanding of Seminole's compliance program and the context of your duties and responsibilities attendant to your designation in the SOM. Performs other duties as applicable to the position or as assigned. Physical Requirements Must be able to work and access all locations of the plant and grounds. Must be able to climb stairs, ladders and scaffolds. Must be able to follow established protective measures including wearing Personal Protective Equipment (PPE). Must have a valid driver's license and an acceptable Motor Vehicle Report. Working Conditions Some travel and work outside of normal business hours. While working in certain areas of the plant, there is the potential for exposure to hazards typical of an industrial working environment. “ Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.”

Ardurra is seeking a CAD Technician/Designer to join our team in our Ocala, FL location! Prepare plans for a wide variety of roadway design projects that include the following elements: geometric design, horizontal and vertical alignment, intersection layout, interchange layout, roadway drainage, and right of way plans. Produce 3D models, roadway plan, profile, and cross section plans, erosion control plans, drainage plans and profiles, utility plans, and signing and pavement marketing plans. Stay current with industry trends and standards related to CADD. Education and Experience Requirements High School Diploma An AS in Drafting/Design Technology or Certification in CAD Foundations/Fundamentals or related field is preferred but not required. 5-10 years of CADD experience Ability to follow basic CAD standards and learn in-house standards. Ability to draw plans efficiently and accurately using MicroStation or AutoCAD. Good written and oral communication abilities and interpersonal skills Working knowledge of Microsoft Office programs Must be highly organized, self-motivated and meticulous with details Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We're not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HJ1 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Ardurra is seeking a CAD Technician/Designer to join our team in our Ocala, FL location! Prepare plans for a wide variety of roadway design projects that include the following elements: geometric design, horizontal and vertical alignment, intersection layout, interchange layout, roadway drainage, and right of way plans. Produce 3D models, roadway plan, profile, and cross section plans, erosion control plans, drainage plans and profiles, utility plans, and signing and pavement marketing plans. Stay current with industry trends and standards related to CADD. Education and Experience Requirements High School Diploma An AS in Drafting/Design Technology or Certification in CAD Foundations/Fundamentals or related field is preferred but not required. 5-10 years of CADD experience Ability to follow basic CAD standards and learn in-house standards. Ability to draw plans efficiently and accurately using MicroStation or AutoCAD. Good written and oral communication abilities and interpersonal skills Working knowledge of Microsoft Office programs Must be highly organized, self-motivated and meticulous with details Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We're not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HJ1

Are you an experienced CAD professional in the Naval Industry looking for an opportunity that shows off your skills? Then TMS (United Plastic Fabricating) is your next career move! TMS, a is family-owned company innovating and revolutionizing the small boat industry by designing and building boats using High Density Polyethylene. We ensure all our products are designed and fabricated to our customer's needs. From the highest quality products to being cost effective, TMS has proven to be the better way. Job Duties: • Assist in 3D model construction and 2D drawing development for new boat models. • Work with our in-house engineering team to produce drawing packages for modular boat construction. • Utilize CAD and CAM programs to prepare final assembly and detail parts drawings and prepare parts for the generation of CNC machining files. What we offer: • Earn 120 hours of PTO • Gainsharing Program! Potential to Earn an extra Paycheck per month! • Health, Dental, Vision and Life Insurance • Paid Parental Leave • Short Term and Long-Term Disability • Paid Holidays • 401K with Match • Student Loan Assistance Program • Tuition Assistance • Opportunities for Flexible Work Opportunities We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Currently accepting applications only for the following states: MA, WI, NH, FL, TX, PA, SC This employer uses E-Verify. Requirements Requirements Between 5 to 10 years' experience preferably in the boating industry CAM experience required Rhino 3D experience a plus Team Player A Yearning for Continuous Improvement Able to learn new technologies and adapt to changing situations. Can manage time effectively and meet deadlines.

Div. 188 Ocala, FL Responsible for laying out, fabricating, assembling, installing, and maintaining piping and piping systems, fixtures, sprinkling, and industrial processing systems. Essential Duties and Responsibilities include the following. Other duties may be assigned. * Installation of pipe fittings, hangers, couplings, and sprinklers per design plan and codes to properly protect building. * Completion of all required weekly paperwork for CFP and as directed by the General Contractor for the job to which crew is assigned. * Communicating with designer before making any design changes. * Communicates with designer regarding any material shortages. * Producing red-line drawings to turn in to designer. * Communicating project and schedule changes to Field Superintendent and Project Manager. * Attending project and coordination meetings as required. * Completion and submission of daily progress reports to Field Superintendent and General Contactor as required. * Documenting and reporting water damage, injuries, and/or accidents to Field Superintendent and General Manager immediately when an incident occurs. * Train Fitters and Helpers on proper installation techniques. Education and/or Experience High school diploma or general education degree (GED); 3-5 years related experience and/or training. Computer Skills Basic computer skills, email. Other Requirements: Pre-employment drug screen, Clean MVR required; overtime may be required. What's In It For You! Century Fire Protection is one of the largest and most successful full-service fire protection companies based in the Southeast and we are still growing! There are a wide range of positions and countless opportunities for career growth. Each employee is empowered to do their job and serve our clients. There is no better place to work in the industry! We are experts in design, fabrication, installation, and maintenance of all types of fire protection systems in virtually all commercial markets for each stage of a buildings life cycle. Headquartered in Duluth, GA, Century Fire has more than 20 offices across seven states including Alabama, Florida, Georgia, Kansas, North Carolina, South Carolina, Tennessee, Texas, and Virginia. Benefits We believe our people are our biggest asset and as such, we offer comprehensive benefits, education, and training to ensure employees succeed and grow. Benefits include: * Medical * Dental * Vision * Flexible Spending Accounts * Voluntary Life Insurance * Short-term & Long-term Disability * Paid Time Off * Paid Holidays * 401(K) with Company Match * Employee Assistance Program * Employee Relief Fund * Supplemental Insurance including Critical Illness, Hospitalization & Accident Century Fire Protection is a GREAT place to work! Come and GROW WITH US!

If you're looking for a special place to build or grow your career, you've found it. Whether you're an experienced professional, a recent college graduate or somewhere in between, IDEX is a place where you can apply your existing skills and learn new ones in an environment where you can make an impact. With interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses around the globe, chances are, we have something special for you. This position requires the Mechanical Designer to be part of a dynamic team that is supporting a global product line with varied responsibilities related to sourcing, product improvements, applications, development, and documentation involving an on-site machine shop, assembly, and testing operations as well as a worldwide supply chain. Actively designs and engineers assemblies or parts to customer specifications and work with production, procurement, Suppliers & Quality during the assembly/fabrication process DUTIES AND RESPONSIBILITIES Creation and editing of models and assemblies in SolidWorks. Development of detail drawings, bills of material, specifications. Update existing production designs and drawings. Establish test plans to validate new/modified designs or benchmark existing designs. Prepare engineering changes, process documentation, and reports. Interface with sales, product management, manufacturing, outside suppliers, and end users. Analyze customer requirements and test results and propose solutions. Research alternative methods, components, designs, processes, or materials. All other duties as assigned. KNOWLEDGE, SKILLS AND REQUIRED ABILITIES Superior ability to produce creative solutions in a fast paced, cross functional, multi-tasking environment. Experience with sheet metal design, weldments, and fabricated assemblies. Accuracy, attention to detail, and excellent communications skills. Ability to design sand cast and investment cast parts. Ability to design castings, weldments, and precision machined parts and assemblies. Experience designing with GD&T. Ability to use ERP system, preferably JD Edwards. Skilled with Microsoft Office Suite. Ability to translate concepts into buildable models and designs. Ability to develop detailed drawings and bills of materials for parts and assemblies. EDUCATION AND EXPERIENCE 4 year degree in Mechanical Engineering from an ABET accredited college or university. Proficient with 3D modeling software - preferably SolidWorks. Possess a general knowledge of component fitments as well as GD&T. PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this position, the employee is regularly required to sit, stand and walk. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must be able to lift and/or move up to 20 pounds or over 20 pounds with assistance. Specific vision abilities required by this job include close vision and ability to adjust focus. May be exposed to various workplace hazards, including chemicals, machinery, and noise. Proper use of personal protective equipment (PPE) is essential. Are you ready to join a different kind of company where our people, our culture, and our commitments are centered around providing trusted solutions that improve lives around the world? IDEX is an Equal Opportunity Employer. IDEX gives consideration for employment to qualified applicants without regard to race, color, religion, creed, genetic information, sex, sexual orientation, gender identity or expression, marital status, age, national origin, disability, protected veteran status, or any other consideration or protected category made unlawful by federal, state or local laws. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact our Talent Acquisition Team at ********************** for assistance with an accommodation. These contact tools may be used only by individuals with a disability for accommodation requests. Do not inquire as to the status of an application.

WHY JOIN THE AMES COMPANIES We have amazing Benefits! Medical, Dental, Vision, Life Insurance, Wellness, 401K, Holidays Employee Assistance Program, Vacation Days, Disability, and much more. WHO WE ARE The AMES Companies, headquartered in Lake Nona-Orlando, FL has a rich American history. The AMES story goes back to 1774, when Captain John Ames began making America's first shovels. AMES brand is the third oldest consumer brand in the country, and its tools helped build America for more than two hundred years. You can learn more about our history here. Our business lines include Home Organization, Lawn and Garden Tools, Outdoor Living, and Cleaning Tools. Our leading global brands are sold to homeowners and professionals involved in new construction, remodeling, and maintenance activities. To learn more about our business lines, visit our website: ********************************** WHO YOU ARE As the Design Specialist, you will demonstrate a high level of customer service while working with our customers to collaborate and design home organization projects in a timely and professional manner. You will have an eye for spatial, utility, and color scheme design visualization, with excellent product knowledge. Experience and skill in designing ClosetMaid products is a plus. Must be a great communicator who can interact with clients, design closet systems, present ideas, and close the sale. We are focused on exceptional customer service and attention to detail. WHERE YOU WILL WORK Our ClosetMaid world headquarters in Ocala is a 600,000 sq. ft. manufacturing and office facility. We will provide all the equipment needed to be successful in your job. WHAT YOU WILL DO Provide before and after-sales support to consumers via phone and email. Before Sales Support - Product, Pricing, Design, and ‘Where to Buy' information. Ask open-ended questions about customer's projects to determine their needs. Provide aesthetic and efficient creative design suggestions based on information provided by the Customer. Provide exceptional customer service through active listening. Recommend the proper parts and quantities needed for installation. Utilize resources to walk through customers with their design solutions. Provide accurate and complete drawings for job requests made by Architects, Designers, Builders, and Contractors for bid submittals. Assist Builders in creating upgrade solutions by creating builder books based on their requirements. Log and update customer information gathered during consultations and follow up with the essential information. Escalate problems that are unable to be resolved on the spot through proper channels. Prepare status reports, including activity, closings, follow-up, and adherence to goals. Be trained in both consumer and pro building division product design. Establish and maintain a positive relationship with current and potential clients. Perform follow-up communication activities via phone, email, and chat. REQUIREMENTS A High School Diploma or GED is a must. Trade school degree in design preferred. 1-2 years of interior design support and visualization experience preferred. Experience in customer service and/or inside sales. Knowledgeable in basic computer skills (MS Office, MS Excel, Outlook, etc.) Strong verbal and written communication. Bilingual in Spanish is a plus. Thrive in a fast-paced team environment. Stay calm under stressful situations. Attention to detail and accuracy. Able to perform basic math functions and calculate dimensions, and amounts. Ability to interpret instructions furnished in written, oral, diagram, or schedule form and perform critical reasoning. Stay current on design trends. Sales and Design Software skills, a plus (Salesforce, LiveStorage, Read Blueprints, CAD). Experience and skill in designing ClosetMaid products are a plus. Compensation: $17.00/hr PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or listen, type and use a mouse. The employee frequently is required to sit. The employee is occasionally required to stand and walk. The employee may occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. WORK AUTHORIZATION The Ames Companies will only employ those who are legally authorized to work in the United States.

Tibbetts Lumber Co. LLC, a growing Lumber and Building Materials company, is seeking an experienced Truss Designer. Under general supervision, this position creates truss placement plans, truss design drawings and truss quotes along with providing technical support to customers and sales representatives related to truss components for residential and commercial projects. The position is an office position that requires the use of discretion and independent judgment with respect to matters of significance. Essential Responsibilities and Duties include: Using proprietary software, produce floor and roof truss placement plans, truss design drawings and truss quotes using your ability to understand blueprints and customer requirements for specific projects. Determine design specifications based on blueprints and structural design needs. Review other designers work as part of a double check system to reduce design errors prior to putting paperwork into manufacturing. Create shop paperwork that is optimized and batch for efficiency based on equipment used in manufacturing. Communicate with customers, general contractors, and sales staff on technical aspects of plans which require clarification from customer, Architect or Engineer. Document communication with said parties using excel spreadsheet and saved emails. Consult with experienced component technicians and management when more in-depth analysis is required. Plan and pace your own work efficiency in order to meet daily, weekly, project, or team related productivity goals. Understand and observe all safety procedures and practices in order to prevent injury to self or co-workers; attend periodic safety meetings as required; recommend changes to improve safety procedures. Other duties may be assigned. Essential Job Requirements include: Knowledge of company products sufficient to determine appropriate structural applications. Use of proprietary software for construction design. Strong attention to detail. Use of discretion and independent judgment with respect to matters of significance. Mathematics and measurement skills. Knowledge of drafting, architectural design or CAD applications. Excellent verbal and written communication skills. Proficiency in Microsoft Office Suite and Mitek Software preferred. Benefits: Tibbetts Lumber offers an excellent benefits package to our employees including: Competitive wages Medical insurance Dental insurance Life insurance Short & Long Term Disability 401(k) plan Vacation, Sick & Holiday pay Health Savings Account Legal Disclosures: Tibbetts Lumber Co. LLC complies with all federal, state and local laws prohibiting employment discrimination of any kind. Tibbetts Lumber Co. LLC is a Drug-Free Workplace and uses pre-employment drug testing to confirm all of its potential employees do not use any restricted substances. Tibbetts Lumber Co. LLC is an at-will employer and can terminate its employment relationship at any time, with or without cause, and without notice.

Highly competitive hourly rate, plus a commission program that has no cap on potential earnings. When meeting target goals you can expect to make an average of $2400 per month in commission. Joining the Cabinets To Go team makes you part of the largest specialty retailer for kitchen and bath in the United States, providing our customers with a the best selection of cabinets, flooring, bath vanities, countertops, backsplashes, knobs and pulls, closet systems and installation. Benefits: * Healthcare: We offer 4 different healthcare plans, giving employees the ability to choose the plan that best meets their needs and budget. One of the plans is available to the employee at no cost. * Dental: Dental insurance is also available at no cost to the employee. Enhanced dental coverage is available at a small cost to the employee. * Life Insurance: We provide company paid life insurance at no charge to employee's equivalent to 1X base for hourly employees and 2X base for salaried employees. Additional coverage is available. * 401(k): The company will match your 401k contribution up to a maximum of 4%, and you are immediately vested in the match. * Additional benefits: The company offers the option to purchase, at extremely competitive rates, coverage for Vision, STD, LTD * Paid Time Off: Cabinets To Go has a competitive PTO program. Accrue time off weekly! * Paid Wellness Days! * Holidays: We offer 6 Company paid holidays! * Employee Assistance Program * Merit Increases * Performance Bonus Sales Associate Training: New sales associates receive training in sales techniques and process, product knowledge, and kitchen design. GENERAL RESPONSIBILITIES: * Provide knowledge of kitchens, bathrooms, closets, and complementary items such as flooring, hardware or countertops in a friendly customer-oriented environment. * Educate customers on specific product features, comparisons and pricing. * Identify customer needs and preferences in order to create a design that is esthetically pleasing and within the customers specifications. * Create concise work orders and coordinate installations; overseeing client projects to completion. * Work with store manager to set personal sales goals and lead generation. * Keep up to date with knowledge of products in catalog. * Excel in customer service while presenting a friendly, positive attitude. * Fulfill basic store maintenance duties. * Assist in loading or offloading of product (will vary from store to store)

Description To provide complex instrumentation and control (I&C) and electrical engineering technician services to assist in attaining the goals of plant reliability, efficiency, safety and environmental compliance in the most cost-effective manner. Essential Functions Detailed planning of equipment or process evaluation, testing and monitoring programs up to three years into the future. Reviews proposed design modification developed by peer group within the department to ensure the completeness and applicability of the design. Conducts or leads others in design studies for Instrumentation and Controls process systems or equipment. Prepares or leads others in the development of technical specifications, pricing documents, bidder's lists, bid evaluation criteria and project cost estimates for process systems, equipment or maintenance projects. Assists other department technical staff on technical/engineering design criteria. Works with technical staff and/or Engineering Supervisor to conduct analysis of complex plant operation or maintenance problems which could lead to design changes, alternate equipment selection, different operating practices or a combination there of. Makes recommendations based on the analysis results. Conducts economic evaluation associated with equipment proposals or alternative practices. Responsible for reviewing and commenting when assigned the lead responsibility for an analysis or evaluation. Conduct operating or maintenance feasibility studies of complex electrical/I&C engineering conditions and systems. Acts as a technical advisor to both the plant operation and maintenance groups. Conducts analysis of control systems, instrumentation, and electrical equipment failures to determine the source and preventative action. Assists the DCS Administrators in troubleshooting and makes recommendations as to changes to the DCS systems. Coordinates activities of outside consultants as assigned. Take a proactive approach regarding personal safety, safety of others and comply with all OSHA and SECI safety rules. Must complete all necessary online or classroom safety courses as directed. Must participate in safety briefings and meetings. Take a proactive approach regarding environmental rules and regulations governing the operation of the plant. Must complete all necessary online or classroom environmental courses as directed. Required to immediately report any, and all, environmental reportable incidents. Performs NERC Compliance Program roles if/as designated in Seminole's Standard Ownership Matrix (SOM) including ongoing evidence retention in “audit-ready” form as applicable and directed. You should also be familiar with Seminole's Enterprise Internal Compliance Program (ENT-GCD-RGC-EP-054) to further your understanding of Seminole's compliance program and the context of your duties and responsibilities attendant to your designation in the SOM. Performs other duties as applicable to the position or as assigned. Qualifications and Education Requirements Graduation from standard high school or State Department of Education or graduation from United States Armed Forces Institute. Associate of Science or an Associate of Arts degree preferred. Fifteen (15) years of experience in large, modern power plants (or applicable equivalent training and education) dealing with the construction, operation and maintenance of electrical and instrumentation and control systems. Experience must include the development of technical specifications, economic studies, evaluation and analysis, or complex technical problems. Practical experience in and working knowledge of complex distributed control systems (DCS). Familiarity with NERC standards and procedures is preferred. Core Competencies : Adaptable, Collaborative, Conscientious, Critical-Thinking, Outcome-Driven and Professional Technical Competencies/Skills : Engineering technician abilities Problem analysis Analytical thinking Knowledge of power plant design, operations and construction Plant operations Project planning and coordination Proficiency with Microsoft Office applications Soft Competencies/Skills : Effective verbal/nonverbal, listening and written communications Result-oriented Organization Attention to detail Multi-tasking Physical Requirements Must be able to work and access all locations of the plant and grounds. Must be able to climb stairs, ladders and scaffolds. Must be able to follow established protective measures including wearing Personal Protective Equipment (PPE). Must have a valid driver's license and an acceptable Motor Vehicle Report. Working Conditions Some travel and work outside of normal business hours. While working in certain areas of the plant, there is the potential for exposure to hazards typical of an industrial working environment. “Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.”

Job Details Century Fire Protection Ocala - Ocala, FL Full Time Up to 25%Fire Sprinkler Foreman Div. 188 Ocala, FL Responsible for laying out, fabricating, assembling, installing, and maintaining piping and piping systems, fixtures, sprinkling, and industrial processing systems. Essential Duties and Responsibilities include the following. Other duties may be assigned. Installation of pipe fittings, hangers, couplings, and sprinklers per design plan and codes to properly protect building. Completion of all required weekly paperwork for CFP and as directed by the General Contractor for the job to which crew is assigned. Communicating with designer before making any design changes. Communicates with designer regarding any material shortages. Producing red-line drawings to turn in to designer. Communicating project and schedule changes to Field Superintendent and Project Manager. Attending project and coordination meetings as required. Completion and submission of daily progress reports to Field Superintendent and General Contactor as required. Documenting and reporting water damage, injuries, and/or accidents to Field Superintendent and General Manager immediately when an incident occurs. Train Fitters and Helpers on proper installation techniques. Education and/or Experience High school diploma or general education degree (GED); 3-5 years related experience and/or training. Computer Skills Basic computer skills, email. Other Requirements: Pre-employment drug screen, Clean MVR required; overtime may be required. What's In It For You! Century Fire Protection is one of the largest and most successful full-service fire protection companies based in the Southeast and we are still growing! There are a wide range of positions and countless opportunities for career growth. Each employee is empowered to do their job and serve our clients. There is no better place to work in the industry! We are experts in design, fabrication, installation, and maintenance of all types of fire protection systems in virtually all commercial markets for each stage of a buildings life cycle. Headquartered in Duluth, GA, Century Fire has more than 20 offices across seven states including Alabama, Florida, Georgia, Kansas, North Carolina, South Carolina, Tennessee, Texas, and Virginia. Benefits We believe our people are our biggest asset and as such, we offer comprehensive benefits, education, and training to ensure employees succeed and grow. Benefits include: Medical Dental Vision Flexible Spending Accounts Voluntary Life Insurance Short-term & Long-term Disability Paid Time Off Paid Holidays 401(K) with Company Match Employee Assistance Program Employee Relief Fund Supplemental Insurance including Critical Illness, Hospitalization & Accident Century Fire Protection is a GREAT place to work! Come and GROW WITH US!