Maintenance Technician jobs at Dexter - 1575 jobs

Job Description Experience a rewarding career maintaining and repairing industrial equipment with the latest technology in material handling systems which include conveyors, robotics, and automatic guided vehicles. We maintain a safe work environment and ensure the implementation of all maintenance safety programs. Benefits include: All necessary Tools and Safety equipment are supplied at no charge Recently revised Mechanic pay scale provides a competitive wage and benefits, based on experience PRIMARY RESPONSIBILITIES: Ensure regular preventative Maintenance is performed on all equipment Perform mechanical and electrical trouble shooting and repair of equipment Hydraulic and pneumatic troubleshooting and repair Installation of new equipment Welding and metal fabrication of parts in need of repair Repairs and maintenance to buildings and grounds for the Distribution Center Mechanical experience with a willingness to continue to learn Experience or schooling in the following areas are preferred but not limited to: Preventative Maintenance Mechanical troubleshooting and repair Hydraulic and Pneumatic repair 3 phase AC and DC electrical testing Electric Forklift repair Conveyor maintenance and repair Variable Frequency Drives and motor Soft Starters PLC programming and schematic reading Welding and metal fabrication Ability to lift up to 50lbs-70lbs Ability to effectively use hand tools Ability to sit or stand for an entire shift Requires intermittent periods of bending, reaching, pulling, and stooping Ability to work additional hours

Supervises and coordinates the departments activities in maintaining and repairing mechanical parts of pumps, cranes, compressors, automobiles, trucks, tractors, and similar equipment used in construction and maintenance. Inspects defective equipment in shop or field to determine extent of wear or damage to direct repairs. Supervises and coordinates activities of employees engaged in production machining and repair of metallic or nonmetallic workpieces, applying knowledge of machine shop procedures, machine tool setup, welding, operating techniques, and production machining methods. Salary Details: $68,640.00 - $80,000.00/yr. based on overall experience Responsibilities: Extensive knowledge of applicable laws, codes, standards, and industry practices relating to Machine Shop and Automotive maintenance and Plumbing trade work. Understand and operate according to State & Federal regulations, Company policy/procedures, and all safety requirements. Remain compliant with all health and safety rules and regulations applicable to the company. Responsible for planned schedule creation and overseeing the adherence and timely completion of work carried out. Increase the site operational effectiveness, improve on project delivery, mean time between failure and down time reduction, and manage and implement improvement plans, driving key performance ensuring that project schedules, deadlines, health, safety and environmental requirements are adhered to. Manage, plan, control and organize the planned preventive and corrective mechanical maintenance on all of the fleet and other equipment in order to maximize their lifespan and ensure safety. This involves monitoring the performance of mechanical machinery ensuring remedial work is undertaken to prevent failure/loss of the facilities and equipment. Monitor the production of jobs and allocate the work on a daily basis to the mechanical technicians, monitoring progress and inspecting completed work to ensure the required standards are achieved. Asses the needs for stocking critical spare parts for continuous production on all critical components. Assess the need of consumables and PPE to support repair efforts. Complete and maintain accurate, timely documentation and records as required. Maintain departments operating expenses within approved budgets. Ensure that resources are used for optimum effect. Provide technical and organizational leadership to departments. Motivate and coordinate department employees and handle any disciplinary issues that arise. Manage e the introduction and purchase of new machinery, plant and equipment from specifications, to managing suppliers through to full installation in collaboration with all relevant work orders. Coordinate with the Purchasing Department the process of disposal of obsolete machinery, plant and equipment from gaining agreement to write off to physically removing it and its safe and lawful disposal. Manage the application of and supervision of machine shop theories and procedures, shop mathematics, machinability of materials, and layout techniques: Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements. Qualifications: Associate's degree / vocational or technical school degree, emphasis in Mechanical/Automotive/HVACHVAC/Welding/Plumbing is required. Preferred focus in Mechanical and/or Structural Trades. Certifications in Mechanical and/or Plumbing Trades preferred. At least 10+ years of prior, work related job experience. Requires independent decision making, nonstandard problem solving, troubleshooting, planning, organizing and the supervision of Machine Shop, Automotive and Plumbing trades. Thorough background in reading, modifying, or correcting blueprints, sketches, and drawings. Must fully comprehend manuals, specifications, or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations, and/or setup requirements. Must be able to manage and verify employee techniques and work in same. Must be detail oriented to guide and instruct employees in trouble shooting and finding causes of mechanical, plumbing and electronic malfunctions.

Sonny's Enterprises is the world's largest manufacturer of conveyorized car wash equipment, parts, and supplies. We are the industry leader, recognized and awarded by the International Car Wash Association for innovating new technologies to advance the industry with products proudly designed and built in the USA. Our culture thrives on finding new and better ways to accelerate what's next. We embrace change and the opportunity it produces to maximize the potential of our most valuable resource - our PEOPLE! We invite you to explore our opportunities and grow your career with us. A Plant and machinery maintenance technician is responsible for ensuring that equipment continues to operate at acceptable levels. First and foremost, a machinery maintenance mechanic is responsible for performing regular maintenance and inspections of equipment; this may involve visual inspections, as well as tasks such as operating a robot to perform a diagnostic test. Aside from general inspection and maintenance, this mechanic responds to requests when a machine breaks down or otherwise malfunctions. Maximizing uptime is critical & being responsive in a timely manner is critical. Responsibilities · Inspect equipment. Make necessary adjustments, document test readings and repairs. · Managing routine and preventative maintenance based on production requirements to minimize production disruptions, equipment failure, downtime, and corrects any unsafe conditions. · Repair or replace essential equipment - both electrical and mechanical. · Read and understand prints, schematics, diagrams, and technical manuals to determine methods and sequence for repairing machinery and equipment. · Perform inspection and preventative maintenance on production equipment utilizing PM programs and inspection checklists. Maintain preventative maintenance logs and equipment manuals. · Align, fit, repair and assemble electrical/mechanical component parts using meters, gauges, power tools, hand tools, lifting devices and drawings. · Respond to Facility Service Requests. · Ensure proper working condition of equipment in Machine Shop & Plant, including CNC Machines, Welding Equipment, Air Lines & Hoses. · Review project instructions and equipment specifications to identify and plan necessary repairs. · Fabricate and/or modify new or used parts to make repairs according to established safety procedures. · Investigate equipment failures and malfunctions. Communicate production team members, or technical experts to resolve intermittent malfunction or failure of equipment or systems. · Complete tasks as required to minimize production equipment downtime. · Ensure proper installation of new equipment. Document all testing of equipment and electronic systems. · Strick adherence to lock out/tag out procedures. · Machinery Maintenance Mechanic Tasks · Repair, install, adjust or maintain machinery. · Perform preventative maintenance inspections. · Maintain work and shop area and stock tools, parts and supplies. · Complete written record of work performed. · Other duties as assigned Qualifications Ability to complete assigned tasks with minimal supervision required · Must be self-motivated with a strong sense of responsibility for the uptime of all manufacturing equipment and systems · High school Diploma or GED · 3 to 5 years of experience in a manufacturing environment · Strong knowledge of CNC troubleshooting, maintenance and repair required · Maintenance experience in machining, welding, electronics and hydraulics · Experience with Forklift repair a plus We offer 100% employer paid medical plan. Other optional benefit programs are available to our employees and their families which include: 401(k) match, additional medical plans, dental, vision, flex spending account, short-term and long-term disability & life insurance coverage. EEO Statement Equal Opportunity Employer Sonny's is proud to be an equal opportunity employer and is committed to maintaining a diverse and inclusive work environment. All qualified applicants will receive considerations for employment without regard to race, color, religion, sex, age, disability, marital status, familial status, sexual orientation, pregnancy, genetic information, gender identity, gender expression, national origin, ancestry, citizenship status, veteran status, and any other legally protected status under federal, state, or local anti-discrimination laws #IND1

At AAM, the POWER is in our people. We believe that an equitable and inclusive workplace benefits everyone, and that the diversity of our Associates drives creativity and innovation. Our global team is made of dreamers, doers and innovators who are Delivering POWER for a safer, brighter and more sustainable tomorrow. Job Posting Title Maintenance Tech Electrical Summary #TeamAAM seeks a Maintenance Technician to join our North Vernon, Indiana team! This position is on 2nd Shift. To perform this job successfully, an individual must be able to satisfactorily perform each crucial duty. The requirements listed represent the knowledge, skill, and ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Ready to Bring the Future Faster with #TeamAAM? Apply today! Job Description * Supports Production operations with all maintenance and repairs for electrical, hydraulic, and mechanical problems such as (but not limited to) 3-axis CNC mills, conveyors, machine automation, and robots. * Analyzes, solves problems, and maintains all plant equipment using sound troubleshooting techniques and repair methodology. * Work from available mechanical and electrical drawings and equipment specifications and schematics. * Assist with research of parts as necessary. * Perform preventative, predictive, and routine inspection maintenance per work orders. * Reads and interprets safety rules, operating and maintenance instructions, procedure manuals, quality documents, set-up instructions, blueprints, and electrical prints. * Completes charts and other simple documents to communicate to the team. * Maintain a safe and clean working environment by following procedures, rules, and regulations. Required Skills and Education * High school diploma or GED * Excellent written and verbal communication skills. * Experience with troubleshooting manufacturing equipment. * Basic understanding of hydraulic and pneumatic circuits and equipment. * Preferred with Fanuc robots for recovery and point adjustment. * Ability to drive a forklift, scissor lift, and articulating arm boom truck. * Validated experience and ability to use standard maintenance and electrical repair tools and equipment and operate lifting equipment, computer terminals, and other tools/equipment. * Allen Bradley Fanuc and Siemens experience preferred. * Minimum 1-2 years of CNC experience and 2-3 years of maintenance experience preferred. About AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Headquartered in Detroit with over 80 facilities in 18 countries, we are Bringing the Future Faster for a safer and more sustainable tomorrow. To learn more, visit AAM.com. Why Join #TeamAAM: As a member of #TeamAAM, you'll get to make a difference on day one. From your first day with us, you'll have the opportunity to grow, embrace challenges, build your skills, and bring your authentic self to work every day, all while helping to shape the future of mobility for AAM…and the world. AAM will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. AAM will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e-mail *************************. AAM is an equal opportunity/affirmative action employer.

At AAM, the POWER is in our people. We believe that an equitable and inclusive workplace benefits everyone, and that the diversity of our Associates drives creativity and innovation. Our global team is made of dreamers, doers and innovators who are Delivering POWER for a safer, brighter and more sustainable tomorrow. Job Posting Title Maintenance Tech Electrical Summary #TeamAAM seeks a Maintenance Technician to join our North Vernon, Indiana team! This position is on 3rd Shift. To perform this job successfully, an individual must be able to satisfactorily perform each crucial duty. The requirements listed represent the knowledge, skill, and ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Ready to Bring the Future Faster with #TeamAAM? Apply today! Job Description * Supports Production operations with all maintenance and repairs for electrical, hydraulic, and mechanical problems such as (but not limited to) 3-axis CNC mills, conveyors, machine automation, and robots. * Analyzes, solves problems, and maintains all plant equipment using sound troubleshooting techniques and repair methodology. * Work from available mechanical and electrical drawings and equipment specifications and schematics. * Assist with research of parts as necessary. * Perform preventative, predictive, and routine inspection maintenance per work orders. * Reads and interprets safety rules, operating and maintenance instructions, procedure manuals, quality documents, set-up instructions, blueprints, and electrical prints. * Completes charts and other simple documents to communicate to the team. * Maintain a safe and clean working environment by following procedures, rules, and regulations. Required Skills and Education * High school diploma or GED * Excellent written and verbal communication skills. * Experience with troubleshooting manufacturing equipment. * Basic understanding of hydraulic and pneumatic circuits and equipment. * Preferred with Fanuc robots for recovery and point adjustment. * Ability to drive a forklift, scissor lift, and articulating arm boom truck. * Validated experience and ability to use standard maintenance and electrical repair tools and equipment and operate lifting equipment, computer terminals, and other tools/equipment. * Allen Bradley Fanuc and Siemens experience preferred. * Minimum 1-2 years of CNC experience and 2-3 years of maintenance experience preferred. About AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Headquartered in Detroit with over 80 facilities in 18 countries, we are Bringing the Future Faster for a safer and more sustainable tomorrow. To learn more, visit AAM.com. Why Join #TeamAAM: As a member of #TeamAAM, you'll get to make a difference on day one. From your first day with us, you'll have the opportunity to grow, embrace challenges, build your skills, and bring your authentic self to work every day, all while helping to shape the future of mobility for AAM…and the world. AAM will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. AAM will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e-mail *************************. AAM is an equal opportunity/affirmative action employer.

Job Description Experience a rewarding career maintaining and repairing industrial equipment with the latest technology in material handling systems which include conveyors, robotics, and automatic guided vehicles. We maintain a safe work environment and ensure the implementation of all maintenance safety programs. Benefits include: All necessary Tools and Safety equipment are supplied at no charge Recently revised Mechanic pay scale provides a competitive wage and benefits, based on experience PRIMARY RESPONSIBILITIES Ensure regular preventative Maintenance is performed on all equipment Perform mechanical and electrical trouble shooting and repair of equipment Hydraulic and pneumatic troubleshooting and repair Installation of new equipment Welding and metal fabrication of parts in need of repair Repairs and maintenance to buildings and grounds for the Distribution Center Mechanical experience with a willingness to continue to learn Experience or schooling in the following areas are preferred but not limited to: Preventative Maintenance Mechanical troubleshooting and repair Hydraulic and Pneumatic repair 3 phase AC and DC electrical testing Electric Forklift repair Conveyor maintenance and repair Variable Frequency Drives and motor Soft Starters PLC programming and schematic reading Welding and metal fabrication Ability to lift up to 50lbs-70lbs Ability to effectively use hand tools Ability to sit or stand for an entire shift Requires intermittent periods of bending, reaching, pulling, and stooping Ability to work additional hours

HIRING HELPER for Machine Maintenance Department of Manufacturer **Apply SEND RESUME **Some Mechanical Skills Required **Must be willing to learn from other Maintenance Personnel Able to recognize and trouble shoot machine errors and make proper adjustments Effectively coordinate issues with Production, Maintenance and Technical sales Be able to identify issues and collaborate with the Facilities Manager on how to address and correct Have the ability to respond in a timely manner to address and correct production down time. Exercise judgment to be able to perform actions that allow production to quickly continue operations. Set-up and operate designated production equipment to satisfaction of Supervisor. Lift and Move at least 50 pounds Finger dexterity Good or corrected vision Able to stand, kneel & bend over for extended periods of time Able to work on a ladder Good mechanical aptitude Can read, speak and understand English written and spoken Able to understand and follow work instructions and drawings Company Pays Prem for BCBS Medical and Dental **Apply Send Resume

Job Description Starting Rate Trainee - $28.05 - Skilled - $31.05 Experience a rewarding career maintaining and repairing industrial manufacturing equipment with the latest technology including conveyors, robotics, and packaging. Responsibilities: Perform regular preventative maintenance on manufacturing equipment Perform mechanical and electrical trouble shooting and repair Hydraulic and pneumatic troubleshooting and repair Installation of new equipment Welding and metal fabrication Maintain a safe work environment Requirements: Mechanical experience with a continued desire to learn Willingness to move up within Midwest Manufacturing Ability to work additional hours as required The ability to analyze situations and equipment Detail-oriented Ability to multitask Experience or schooling in the following areas are preferred but not limited to: o Industrial Maintenance o Preventative Maintenance o Mechanical and electrical troubleshooting and repair o Hydraulic and pneumatic repair o 3 phase AC and DC electrical testing Must be able to lift 50lbs frequently and 70lbs occasionally

About NSI: NSI relies upon its advanced engineering and extensive manufacturing experience to identify and implement cost savings during the initial design phase and launch phases of a new program. Thereafter, we incorporate state-of-the-art automation and streamlined manufacturing processes to offer further savings after start of production. Job Summary: Northern Stamping, a prominent unionized metal stamping company, is seeking a skilled and experienced Electrical Maintenance Technician to join our maintenance team. In this role, you will be responsible for troubleshooting, maintaining, and repairing electrical systems and equipment across our manufacturing operations. The ideal candidate will possess advanced electrical knowledge, have hands-on experience with industrial electrical systems, and demonstrate a proactive approach to ensuring the smooth operation of our equipment. Key Responsibilities: Preventative maintenance on the press or weld cells Basic mechanical repairs, basic electrical wiring Basic electrical wiring, as trained Performing technical maintenance duties as directed by management. Perform advanced troubleshooting, diagnostics, and repairs on electrical systems and components, including motors, control circuits, PLCs, and stamping machinery Work closely with the production team to ensure minimal interruption to operations due to electrical failures. Maintain detailed records of electrical maintenance activities, including work completed, parts used, and service intervals. Install, upgrade, and replace electrical systems, equipment, and machinery as necessary. Perform advanced troubleshooting, diagnostics, and repairs on electrical systems and components, including motors, control circuits, PLCs, and stamping machinery. Includes overtime and weekend work Preferred Qualifications: Must have a journeyman's electrician certification or at least 2 years of advanced education in electrical engineering Ability to lift up to 50 lbs. Comfortable working in a noisy, fast-paced environment with the appropriate personal protective equipment (PPE). Northern stamping is an equal opportunity employer and encourages individuals of all backgrounds to apply. We offer competitive wages, comprehensive benefits, and opportunities for professional growth and development. Benefits we offer: Full time employment Paid Holidays Paid time off Perfect attendance bonus Room for advancement & Promotions/Growth within company Company promotes from within Medical Dental Vision Critical Illness Insurance Hospital Insurance Accident Insurance Employee Assistance program Short Term Disability 401K + Company Match Life and AD&D Insurance Flexible Spending Account Tuition Reimbursement Union

Pipestone Repairs & Maintenance is hiring a Maintenance Technician to service farms in the DeKalb, IL area. This role offers variety, teamwork, and the chance to make an impact for farmers every day. What You'll Do: ✔ Maintain and repair machinery, equipment, and facilities ✔ Perform preventative maintenance and troubleshoot issues ✔ Ensure safety and biosecurity protocols are followed ✔ Collaborate with managers and technicians on repair planning ✔ Care for company assets including vehicles and tools What We're Looking For: ✅ High school diploma or GED preferred ✅ 2+ years in production, operations, or maintenance ✅ Strong troubleshooting and communication skills ✅ Ability to work independently and as part of a team ✅ Must qualify to drive a company vehicle Join a team that values Integrity, Commitment, Caring, Teamwork, and Growth. Apply today!

Pay Range: $17-$20 hourly Monday - Friday (32-40 hours a week) About Us ADESA, a Carvana owned company, currently operating over 50 locations throughout the US. Our Auto Auctions, some up to 200 acres, provide a wide array of vehicle services including repair & reconditioning, auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture - help others, and they will help you. Our industry is fun, fast-paced, and competitive - and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Get a sneak peek into life at ADESA! Role and Team Reporting to the Facilities Manager or designated manager, ensuring safety and efficient auction operation for all employees through repair and maintenance of all auction facilities and equipment. Responsible to keep workplace safe and free of hazardous situations in accordance with corporate and security guidelines, policies and procedures. Perform all additional duties as directed by Facilities Manager. Must know, practice, and ensure that company policies, procedures, and applicable state and federal laws are always followed. Responsibilities Provide excellent customer service Make sure customers receive prompt, efficient and courteous attention. Maintain a professional appearance, orderly work environment and friendly disposition by greeting others. No smoking in customer vehicles. Resolve any customer complaints in a friendly, courteous manner and advise Management of all serious complaints or incidences. Maintain work station Ensure all auction conditions are not a potential threat to employee or customer safety. Respond to and follow proper procedures on employee or customer accidents, injuries, and loss or damage to any property. Report all incidents to Maintenance Manager or General Manager immediately per auction policy. Other responsibilities Maintain equipment and tools properly and advise supervisor or manager of any needed equipment maintenance or breakdown. Practice and promote teamwork at all times. Set a good personal example of attitude and performance. Take appropriate safety precautions such as safety glasses, respirators, and protective clothing when appropriate. Practice and promote company Core Values. Building Support and Upkeep Responsible for keeping the lots and buildings in good repair by performing the maintenance tasks, including but not limited to roofing, plumbing, welding, and carpentry. Monitor and Control all facility conditions for cleanliness and safety per auction and company standards. Ensure all auction building and grounds are not a potential threat to customer or employee safety. Respond to and follow proper procedures on employee or customer accidents, injuries and loss or damage to property. Report all incidences to Facilities Manager immediately. Equipment Support Ensure good operating condition of all equipment and provide routine preventative maintenance. Provide minor maintenance and repair to equipment as needed. Monitor and control all equipment for cleanliness and safety per auction and company standards. Basic knowledge of hand tools, possible power tools. Communication Maintain a good flow of communication with all personnel Respond to other departments maintenance and equipment needs Qualifications Must be at least eighteen (18) years of age. Must be qualified to operate a motor vehicle and possess a valid driver's license. Must have a demonstrated ability to read, write, and communicate effectively in English. Must have the ability to physically operate vehicle equipment and tools. Previous Maintenance experience preferred. Computer skills preferred Effective customer relations, communication, and interpersonal skills required. Ability to understand and adhere to Company policies in all areas required. ADESA Benefits and Perks Competitive Pay | Quality Benefits | Holiday and Paid Time Off | Education and Equipment Reimbursement Programs | Matching 401(k) | Career Path Opportunities | And More! Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. The physical activity requirements of the position are Medium to Heavy Physical Work. Visual acuity requirements include color, depth perception and field of vision comparable to definitions for Clerical, Administrative, Machine Operators (including inspection) positions. Constant - reaching, standing, walking, grasping, feeling, talking, hearing Frequent - stooping, repetitive motion Occasional- balancing, kneeling, crouching, pushing, pulling, lifting Potential - running, jumping, yelling or other rapid forceful movement in emergency situations. Physical Working Conditions This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. Note: Refer to the Handbook and Policy Manuals for important addendum requirements to all s. This in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. To be able to do your job at ADESA, you must be able to read, write, speak, and understand English. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Pipestone Repairs & Maintenance is hiring a Maintenance Technician to service farms in the Quincey, IL area. This role offers variety, teamwork, and the chance to make an impact for farmers every day. What You'll Do: ✔ Maintain and repair machinery, equipment, and facilities ✔ Perform preventative maintenance and troubleshoot issues ✔ Ensure safety and biosecurity protocols are followed ✔ Collaborate with managers and technicians on repair planning ✔ Care for company assets including vehicles and tools What We're Looking For: ✅ High school diploma or GED preferred ✅ 2+ years in production, operations, or maintenance ✅ Strong troubleshooting and communication skills ✅ Ability to work independently and as part of a team ✅ Must qualify to drive a company vehicle Join a team that values Integrity, Commitment, Caring, Teamwork, and Growth. Apply today!

Dana is a global leader in the supply of highly engineered driveline, sealing, and thermal-management technologies that improve the efficiency and performance of vehicles with both conventional and alternative-energy powertrains. Serving three primary markets - passenger vehicle, commercial truck, and off-highway equipment - Dana provides the world's original-equipment manufacturers and the aftermarket with local product and service support through a network of nearly 100 engineering, manufacturing, and distribution facilities. Job Purpose The Maintenance Technician is responsible for performing preventative, predictive and corrective maintenance on lab test equipment. This position directly contributes to lab metrics of equipment utilization/uptime requirements, safety and budget initiatives. Job Duties and Responsibilities * Troubleshooting and repair of all Test Lab equipment. * Perform daily Preventive Maintenance work on all equipment including, but not limited to Dynamometers, Hydraulic pumps/ linear and rotary actuators, misc. testing equipment, manufacturing and assembly equipment, Materials testing equipment and other test and manufacturing departments. * Basic troubleshooting and repair of all Test Lab electrical systems. * PLC Ladder Logic Experience Preferred * Experience with 480V and low voltage systems and troubleshooting * Assist in the Development and maintaining of a preventive, predictive and corrective Maintenance system * Assist in Special Projects, coordination of inventory, and building test systems * Utilize preventive, predictive and corrective maintenance tools and techniques such as vibrations and oil analysis, thermographic imaging, ultrasonic and electrical diagnostics for accessing the condition of the equipment and developing maintenance schedule to prevent catastrophic failures. * Participate in annual Calibration / PM system audits. * Assist and perform calibration activities. * Maintain PM procedures, work instruction and checklists to ensure proper timing and methods are followed based on equipment type and manufacturer requirements. * Assist with scheduling the preventive, predictive, corrective and calibration activities * Maintain required technical documentation for the position. * Responsible for cost savings initiatives for PM and calibration. * Provide off-shift support when needed. Qualifications * High school dipolma * 3+ year's experience in electrical troubleshooting experience * Experience troubleshooting / repair of testing equipment. * Dynamometer troubleshooting and repair experience preferred. * 3 year's Experience troubleshooting and repair of Hydraulic systems and servo controlled actuators * Experience in Preventive, Predictive and Corrective Maintenance and use of calibration equipment, and tooling * Self-directed, motivated, and organized individual who is willing to accept responsibility and complete tasks on time. * Basic computer skills and understanding of Microsoft Office Suite. * Excellent communication skills (both written and verbal). * Willingness to work overtime or off-shifts as requested. * Must be team oriented. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Unsolicited Resumes from Third-Party Recruiters Please note that as per Dana policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Dana will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Join our team of 40,000 problem solvers who are fostering a culture of innovation by leveraging the diverse perspectives of our global team. We believe in facing challenges head-on by finding opportunity and uncovering possibility, where roadblocks and barriers become targets instead of obstacles. We are One Dana with limitless opportunity. Our Values * Value Others * Inspire Innovation * Grow Responsibly * Win Together

Dana is a global leader in the supply of highly engineered driveline, sealing, and thermal-management technologies that improve the efficiency and performance of vehicles with both conventional and alternative-energy powertrains. Serving three primary markets - passenger vehicle, commercial truck, and off-highway equipment - Dana provides the world's original-equipment manufacturers and the aftermarket with local product and service support through a network of nearly 100 engineering, manufacturing, and distribution facilities. Job Purpose Description / Requirements: Dana is a global leader in drivetrain and e-Propulsion systems. We engineer, manufacture, and distribute power-conveyance and energy-management solutions for the vehicles of today and tomorrow. This position is located in Toledo, Ohio. Under the direct supervision of the Maintenance Supervisor, the Maintenance Technician will be responsible for performing general maintenance and repairs on facility equipment and property structures, in addition to performing grounds maintenance. All work will be done in compliance with EPA, Hazmat and OSHA safety rules and regulations. Job Duties and Responsibilities Responsibilities: * Troubleshoot and repair machinery and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. * Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe. * Operate in response to requests by Maintenance Supervisor or support personnel and set priorities as required to maximize equipment uptime. * Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly. * Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable. * Follow designated work instructions as outline for specific functions. These include, but are not limited to; PM work orders, utilizes eMaint CMMS system, continuous improvement tasks, new machine installation set-ups and changeovers, and repair/refurbish assignments. * Update drawings/prints, order and maintain spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics. * Maintaining and repairing the building and assets both inside and outside the property. * Electrical experience and knowledge in 480V 3-phase, 120V, DC voltage, high AMP loads and Delta and Y systems. * Willing to attend training courses either on or off site. * Follow standard practices and all governmental regulations and laws relating to powered equipment. * Must be able to work independently, follow through and complete tasks, and handle a multitask workload. * Perform other related duties as assigned by immediate supervisor and management. Requirements: * High school diploma or general education degree (GED) * Technical degree or Journeyman Card (Preferred) * Good electrical and mechanical skills, as demonstrated through an aptitude test. * 3+ years of industrial manufacturing maintenance experience preferred, preferably in the automotive industry. * Must have strong background in mechanical, electrical, hydraulic, pneumatic, robotic arms, welding, basic fabrication, and overall machine troubleshooting skills. * Ability to troubleshoot and repair electrical circuits and systems up to 110 volts. * Familiarity with complex machinery, electrical circuits, and plant operating equipment. Should maintain a sense of urgency, self-motivation and overall good work ethic while performing tasks in a safe manner. * Knowledge of industrial, mechanical, electrical codes, techniques, and standards. Familiarity with government regulations for industry and safe work practices dealing with machine repair. * Skills in interpersonal relations both written and oral communications. Physical Demands: * A physically demanding position requiring lifting and carrying up to 60lbs. The ability to stand continuously is essential with occasional walking and sitting. The nature of this position will require employee to perform a wide range of physical activities ranging from pushing and pulling objects up to 30lbs, reaching, bending, and squatting. Education and Qualifications Skills and Competencies We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Unsolicited Resumes from Third-Party Recruiters Please note that as per Dana policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Dana will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Join our team of 40,000 problem solvers who are fostering a culture of innovation by leveraging the diverse perspectives of our global team. We believe in facing challenges head-on by finding opportunity and uncovering possibility, where roadblocks and barriers become targets instead of obstacles. We are One Dana with limitless opportunity. Our Values * Value Others * Inspire Innovation * Grow Responsibly * Win Together

Electrical Maintenance Technician Summary: Under general supervision, performs advanced and expert level troubleshooting, diagnoses, repair, maintenance and reconditioning, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications of machinery and mechanical equipment, such as motors, hydraulic systems and pumps, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision-measuring and testing instruments. Understands the theory of operation for the Die Cast processes and all related ancillary equipment. Works independently, providing assistance and leadership to the team. Essential Duties and Responsibilities include the following. Other duties may be assigned. Performs self-directed reactive and planned maintenance which includes but is not limited to observing devices in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examines parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; tests for electrical and hydraulic circuitry and mechanical systems; orders supplies and repair items as necessary. Acts as a proactive project manager and works closely with the maintenance manager. Analyzes and recommends engineered solutions to failures. Lays out, wire, builds, and troubleshoots electrical panels and/or other machinery to NFPA/NEC standards. Provides leadership and assistance to lower level technicians. Actively supports safety program tough participation in safety team meetings, investigating safety incidents, conducting safety audits, and implementing corrective actions and by following safety procedures and 5S standards. Supervisory Responsibilities This position has no supervisory responsibilities. May train, orient, lead, assign or check the work of lower level employees. Education and/or Experience High School Diploma or Equivalency The following are not required for entry level maintenance technician: Five years experience in maintenance field or: Associate degree and three years experience in the maintenance field or Five years experience in machine repair environment, or Journeyman card in maintenance field Skills and Abilities Adheres to company safety procedures Must be a team player, organized, self-motivated and able to prioritize Must be computer literate, knowledge of CMMS use; Microsoft Office Excel, Word and Outlook preferred Must be able to interpret programmable logic controllers; I/O diagnostics, programming of safety interlocks and ancillary equipment interlocks, backing up and restoring programs, edit and documentation follow-up. Demonstrated ability to work with hands and to work in mechanically oriented situations Knowledge of Ube and Buhler Prince Die Cast machines, hydraulic systems and servo shot controls Knowledge of holding furnaces functions and operations Knowledge of hot oil heating units Knowledge of Rimrock sprayers/ladles mechanical functions and controls Knowledge of Fanuc and ABB robots programs, manipulation, maintenance and troubleshooting Knowledge of overhead cranes and process water systems operations Knowledge of plant air systems Performs welding, rigging, moving of equipment Be able to operate a forklift and articulating boom Ability to analyze and solve problems; use advanced diagnostic tools to troubleshoot and/or repair electrical, hydraulic or mechanical failures; read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Certificates, Licenses, and Registrations Forklift Certification Lift/Boom Certification Additional Competencies Knowledge of TS-16949 quality systems

Summary: Under general supervision, performs advanced and expert level troubleshooting, diagnoses, repair, maintenance and reconditioning, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications of machinery and mechanical equipment, such as motors, hydraulic systems and pumps, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision-measuring and testing instruments. Understands the theory of operation for the Die Cast processes and all related ancillary equipment. Works independently, providing assistance and leadership to the team. Essential Duties and Responsibilities include the following. Other duties may be assigned. * Performs self-directed reactive and planned maintenance which includes but is not limited to observing devices in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examines parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; tests for electrical and hydraulic circuitry and mechanical systems; orders supplies and repair items as necessary. * Acts as a proactive project manager and works closely with the maintenance manager. Analyzes and recommends engineered solutions to failures. Lays out, wire, builds, and troubleshoots electrical panels and/or other machinery to NFPA/NEC standards. * Provides leadership and assistance to lower level technicians. * Actively supports safety program tough participation in safety team meetings, investigating safety incidents, conducting safety audits, and implementing corrective actions and by following safety procedures and 5S standards. Supervisory Responsibilities * This position has no supervisory responsibilities. May train, orient, lead, assign or check the work of lower level employees. Education and/or Experience * High School Diploma or Equivalency * The following are not required for entry level maintenance technician: * Five years experience in maintenance field or: * Associate degree and three years experience in the maintenance field or * Five years experience in machine repair environment, or * Journeyman card in maintenance field Skills and Abilities * Adheres to company safety procedures * Must be a team player, organized, self-motivated and able to prioritize * Must be computer literate, knowledge of CMMS use; Microsoft Office Excel, Word and Outlook preferred * Must be able to interpret programmable logic controllers; I/O diagnostics, programming of safety interlocks and ancillary equipment interlocks, backing up and restoring programs, edit and documentation follow-up. * Demonstrated ability to work with hands and to work in mechanically oriented situations * Knowledge of Ube and Buhler Prince Die Cast machines, hydraulic systems and servo shot controls * Knowledge of holding furnaces functions and operations * Knowledge of hot oil heating units * Knowledge of Rimrock sprayers/ladles mechanical functions and controls * Knowledge of Fanuc and ABB robots programs, manipulation, maintenance and troubleshooting * Knowledge of overhead cranes and process water systems operations * Knowledge of plant air systems * Performs welding, rigging, moving of equipment * Be able to operate a forklift and articulating boom * Ability to analyze and solve problems; use advanced diagnostic tools to troubleshoot and/or repair electrical, hydraulic or mechanical failures; read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Certificates, Licenses, and Registrations * Forklift Certification * Lift/Boom Certification Additional Competencies * Knowledge of TS-16949 quality systems

At AAM, the POWER is in our people. We believe that an equitable and inclusive workplace benefits everyone, and that the diversity of our Associates drives creativity and innovation. Our global team is made of dreamers, doers and innovators who are Delivering POWER for a safer, brighter and more sustainable tomorrow. Job Posting Title Facilities Maintenance Summary $1000 New Hire Bonus after 90 days! Starting wage up to $20/hour with full benefits to include: Medical Dental Vision Vacation Paid Holidays 401k Job Description * Clean & fill filters on Die Cast Machines as required. * Clean floors, walls, lunch room, locker rooms, trash containers, windows, etc. Fill towel and soap dispensers. * Steam clean and pressure wash equipment as directed. * Operate plant sweeper, floor scrubber, waxing buffer. * Remove snow and apply salt on walk ways, as needed. * Keep aisles, fire extinguishers, hoses and electrical boxes clear at all times. * Remove empty plant trash containers as necessary. Required Skills and Education High school diploma or equivalent About AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Headquartered in Detroit with over 80 facilities in 18 countries, we are Bringing the Future Faster for a safer and more sustainable tomorrow. To learn more, visit AAM.com. Why Join #TeamAAM: As a member of #TeamAAM, you'll get to make a difference on day one. From your first day with us, you'll have the opportunity to grow, embrace challenges, build your skills, and bring your authentic self to work every day, all while helping to shape the future of mobility for AAM…and the world. AAM will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. AAM will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e-mail *************************. AAM is an equal opportunity/affirmative action employer.

McCluskey Chevrolet is seeking a skilled and dedicated Mobile Fleet Technician to join our team in Cincinnati, Ohio. As a Mobile Fleet Technician, you will be responsible for performing diagnostic tests, maintenance, DOT Inspections, and repairs on customer and Fleet vehicles at various locations. This is a rewarding opportunity for an experienced technician who thrives in a fast-paced, customer-focused environment. JOB TITLE: Mobile Fleet Technician REPORTS TO: Service Manager LOCATION: Loveland, OH A SHORT LIST OF YOUR TASKS AND RESPONSIBILITIES: Performing diagnostics and repairs on customers and Fleet vehicles at various locations Identifying and resolving technical issues Performing preventive maintenance and DOT Inspections on Fleet vehicles Providing excellent customer service and ensuring customer satisfaction Adhering to safety protocols and maintaining a clean work area Keeping up-to-date with industry trends and advancements WE'RE LOOKING FOR A SELF-STARTER WHO MEETS THE FOLLOWING QUALIFICATIONS: Proven experience as an Automotive Technician or similar role Proficient knowledge of vehicle diagnostic equipment and computer systems Strong mechanical and technical skills Diesel experience preferred, but not required Ability to prioritize tasks and work efficiently under pressure Excellent problem-solving and communication skills Valid driver's license and clean driving record ASE certification is a plus HERE'S HOW WE TAKE CARE OF YOU (AND YOUR LOVED ONES): Medical, dental, and vision benefits Voluntary benefits available Relocation Assistance Paid time off upon hire Paid company holidays 401(k) with employer match Growth potential Automotive discounts IF YOU ARE QUALIFIED, YOU WILL BE CONSIDERED FOR THIS POSITION: An Equal Employment Opportunity/Affirmative Action Employer M/F/D/V. Only qualified individuals (those who meet the fundamental qualifications) will be considered as applicants for this position. Applications will be accepted for a minimum of 3 business days from the date of the initial posting. McCluskey Chevrolet will not discriminate against persons because of their disability, including disabled veterans, and will make reasonable accommodations for known physical or mental limitations of qualified employees and applicants with disabilities. If you are interested in applying and require special assistance or accommodations due to a disability, please contact our Human Resources department. McCluskey Chevrolet participates in E-Verify. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization.

Are you someone who thrives in hands-on environments, enjoys supporting busy teams, and takes pride in keeping things organized and running smoothly? Do you like working behind the scenes to make sure people have what they need to succeed? Are you proactive, reliable, and energized by daily task completion and equipment preparation? If so, this might be the right fit for you! About Us MNL is a full-service ecological restoration company dedicated to Healing the Earth. Our services include native seeding and plant production, shoreline construction and wetland restoration, prescribed fire/burns, conservation grazing, vegetation management, and ecological consulting. We also support solar and infrastructure projects with pollinator-friendly practices and land stewardship expertise. The Equipment & Yard Technician - 2nd Shift role is an essential part of our field support team, helping ensure daily operations run smoothly behind the scenes. This position directly supports our crews by staging and preparing equipment and materials so they are ready to hit the ground running each morning. The Opportunity We're seeking Equipment & Yard Technician - 2nd Shift team members to join us at our Otsego, MN location. This role plays a key part in preparing our field teams for success by ensuring that equipment, vehicles, and materials are properly cleaned, maintained, organized, and ready for deployment. This is a great opportunity for someone who enjoys hands-on work, takes pride in operational excellence, and thrives in a fast-moving, highly collaborative environment. You will be responsible for preparing daily loads, maintaining equipment, and supporting efficient field operations. What You Will Do Clean and reset company vehicles and equipment: Wash and detail trucks, trailers, and machinery to keep equipment in good working order and ready for the next day's use. Perform basic equipment checks: Check fluids like oil and coolant, and do simple walk-around inspections to help spot any issues early. Assist with preventative maintenance tasks: Grease moving parts, fuel equipment, and complete quick, daily upkeep steps to support the mechanics and field teams. Move equipment and vehicles around the yard: Safely drive and park trucks, trailers, tractors, and other equipment within company property to help crews reset for the next day. Load equipment and materials: Prepare trucks and trailers for field crews by carefully loading and securing equipment using chains, straps, and other methods to prevent shifting during transport. Review and prepare daily load requests: Work with managers and supervisors to confirm what's needed for the next day's projects and ensure everything is prepped and staged for smooth morning departures. Keep the yard and staging areas organized: Help maintain an orderly, efficient workspace so field teams can quickly find what they need. Support a smooth end-of-day process: Be a key team member helping reset and prepare operations as crews return in the evening, creating a seamless handoff for the next day's shift. Pitch in where needed: support the team with other duties to keep field operations running smoothly. What You Will Need To Be Successful Must be available to work full-time, 2nd shift (3:00-11:00pm Monday-Thursday & 10:00am-6:00pm Sunday). Must be able to lift up to 50 lbs. and perform physical tasks such as bending, stretching, pushing, pulling, and repetitive movements throughout the shift. Must be able to work outdoors in varying weather conditions. Basic comfort with driving and maneuvering trucks, trailers, tractors, or other equipment OR a willingness to learn how to safely operate company vehicles & equipment. Previous experience in construction, agriculture, landscaping, or similar industries is helpful, but not required. Comfortable working in a fast-paced, hands-on environment with daily physical activity. Self-motivated and able to work independently. Strong time-management skills and the ability to meet daily goals. Flexibility and adaptability to respond to changing priorities and field team needs. Strong communication skills and a positive, team-oriented attitude. MNL requires all selected applicants who accept a job offer with the company to complete a pre-employment background check and motor vehicle records (MVR) search. All hired employees are also subject to random drug testing under our zero tolerance drug & alcohol policy.