Diesel mechanic jobs in Baltimore, MD

Position OverviewThe primary purpose of the Tech III, MHE position is to oversee and repair material handling equipment (MHE). This role will oversee the safe operation, repairs, and preventative maintenance of MHE equipment including electric and propane industrial forklifts, pallet jacks, hi-low lifts, scissor lifts, scrubbers/sweepers, battery charging stations and cars, batteries, etc. Provide assistance to Supervisor/Manager of Maintenance to ensure assets are managed in accordance with the following: Equipment/parts manufacturers, equipment/parts suppliers, EPA, OSHA and applicable State and Local Codes.Job Description Benefits start on day one! Schedule: Sunday-Wednesday 7am-5:30pm Compensation: $28-$35/hour Check out a day in the life here: *********************************** You will contribute by: Oversee and manage the repair of the MHE fleet including monitoring and trending, troubleshooting and repairs and preventative maintenance. Conducting preventive maintenance (P.M.'s) within manufacturer's guidelines/specifications and established timelines to include oil changes, filter changes, calibration of equipment, belts changes, inspections, adjustments, lubrication, etc. Concise reporting of required inspections, evaluations, P.M. procedures, etc. and clear communication with Management, etc. Responsible for logging time and materials into computerized maintenance management system (CMMS) on a daily basis in the form of repairs, P.M.s, etc. Responsible for daily communication of all pertinent information regarding equipment operation and maintenance to departmental management and other maintenance teams. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Required to interpret and understand plans and specifications, schematics, operating and maintenance manuals, etc. for all systems being overseen. Assist manager/supervisor in developing standard operating procedures, daily work schedules, and duty cycles for all repairs and maintenance for MHE and battery equipment. Assist in managing outside battery, MHE, and electrical contractors conducting service, repair and new contract work. Assist management in creation of budgets for individual projects, yearly capital and yearly operating expenses. This position will also assist the battery technicians. Duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, and other general maintenance activities. This position will also assist the building and refrigeration maintenance teams. Duties will include assisting in general building repairs, electrical troubleshooting and repairs, refrigeration systems repair and maintenance, and other general maintenance activities. There may be times when support is needed at other facilities and travel may be asked of the associate. Environment Warehouse: Perishable Warehouse (28F to 60F) Skills Extensive experience with Crown, Raymond, and Toyota material. Manufacturer Certifications (Raymond, Crown, Toyota, etc.)handling equipment. Detailed knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC systems, drive motors, power amps, electrical controls including PLC systems. Detailed knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, internal combustion motors, telescopic masts, reach mechanisms, steering systems, suspension systems, etc. Building and HVAC: General knowledge of building (Dock doors and plates, electrical, HVAC systems, etc.) systems. CMMS: Computerized Maintenance Management System experience for logging work orders and P.M's Hydraulic systems, Electronic Systems, PLC/Low Voltage Control Systems Physical abilities: Some travel, site inspections, equipment inspections, mechanical repairs and replacements, all which require good mobility, physical exertion, walking, bending, reaching, climbing ladders, carrying tools and parts, etc. OSHA, ASE Certifications (Electrical, Mechanical, Braking Systems, etc.) Years Of Experience 2-5: Relevant experience. 4 years: MHE Maintenance Position. We Offer Benefits available from day 1 (medical, dental, vision) Company Matched 401-k Paid training Weekly Pay PTO and Holiday Pay offered Career Progression Opportunities Tuition Reimbursement Employee Health & Wellness program Employee Discounts / Purchasing programs Employee Assistance Program C&S Offers $100 towards the purchase of safety shoes Every person matters. We keep our values alive through a culture that embraces differences and ensures that every person matters. The Fine Print This Job advertisement does not constitute a promise or guarantee of employment. This job advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of C&S Wholesale Grocers. QualificationsKPIs, Safety & Sanitiation, Technical Certification - Electrical Engineering Technology, Training & Development, Values & Teamwork, WarrantyShift1st Shift (United States of America) CompanyC&S Wholesale Grocers, LLCAbout Our Company C&S Wholesale Grocers, LLC is an industry leader in supply chain solutions and wholesale grocery supply in the United States. Founded in 1918 as a supplier to independent grocery stores, C&S now services customers of all sizes, supplying more than 7,500 independent supermarkets, chain stores, military bases and institutions with over 100,000 different products. C&S also proudly operates and supports corporate grocery stores and services independent franchisees under a chain-style model throughout the Midwest, South and Northeast. We are an engaged corporate citizen, supporting causes that positively impact our communities. Working Safely is a Condition of Employment at C&S Wholesale Grocers, LLC. C&S Wholesale Grocers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. The Company provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Diesel Mechanic Location: Hanover, MD 3rd Shift Available (11PM - 8AM) First Year Earning Potential of $55k to $65k MOTORCOACH DIESEL MECHANICS NEEDED! Coach USA has new and exciting career opportunities for Diesel Mechanics at our Hanover, MD location. We are looking for individuals interested in repairing and inspecting company equipments in a cost effective, safe and timely manner. What We Offer: First year earning potential of $55K to $65K Full Benefits offered to top full time employees: Medical, Dental, Vision, and Life Insurance 401K Retirement plan Paid Vacation Direct Deposit available Qualifications: 3-5 years' experience as a B level mechanic Requirements: Formal technical training degree, certificate or diploma or equivalent work experience Possess strong managerial and organizational skills Ability to bend, stoop, crawl, walk and sit on a regular basis with frequent lifting of up to 50 pounds Certification Diesel experience CDL preferred Effective written and oral communication skills Veterans are encouraged to apply! Come Join the Coach USA-Hanover team! Coach USA would love to discuss your qualifications for this position. To learn more about your next big career change! APPLY NOW! Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class. ©"lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "auto mechanic", technical", "entry level mechanic"©

Diesel Mechanic 32.00-36.00 per hour LANDOVER, MD Description Diesel Mechanics Landover, MD Hourly Pay: $32.00 - $36.00 per hour (based on experience) $2500 Sign on Bonus Shift/Schedule: Mid-Shift Tues-Fri 11am- 7:30pm ;Saturday 9am-5:30pm 1st Shift Monday- Friday 3am-11:30am Must have diagnostic experience Aim's company culture has been nationally recognized by Newsweek and The Wall Street Journal. We offer high, consistent pay in a stable work environment. Aim has spent 40 years building a workplace where employees feel empowered, valued, and respected every day! Benefits for Employee & Family: Anthem Blue Cross/Blue Shield Coverage 401K and Company Match Paid Time Off Company Paid Life Insurance Short-Term/Long-Term Disability Room for growth! Aim promotes from within! Click to apply or contact a recruiter with questions by calling ************. Pay Range: 32.00-36.00 per_hour, General Benefits: Benefits for Employee & Family: • Anthem Blue Cross/Blue Shield Coverage • 401K and Company Match • Paid Time Off • Company Paid Life Insurance • Short-Term/Long-Term Disability Requirements 3+ years diesel mechanic experience required Must Have Tools/Toolbox CDL and/or ASE Certifications preferred Aim Transportation Solutions is a Top 30 Logistics Company! We are family-owned and financially strong. Aim Transportation Solutions has been in business for over 40 years and has grown to 1,000+ employees providing service nationwide. For more information about Aim Transportation Solutions, visit *************** #aimkean #mechjob Date posted: 12/16/2025

SNI has an immediate need for an On-Road Field Diesel Mechanic to join a well-established and successful residential and commercial site developer! The successful On-Road Field Diesel Mechanic will have experience maintaining, repairing, and troubleshooting heavy diesel-powered equipment at various job sites throughout the Baltimore, Maryland area. You will be provided with a company truck and will be tasked with working on heavy equipment and diesel engine mechanics, excellent troubleshooting skills, and the ability to work independently in a field environment. RESPONSIBILITES: Perform on-site maintenance and repairs of heavy diesel-powered equipment, including excavators, bulldozers, loaders, and other construction machinery. Travel to various job sites to diagnose and resolve mechanical and diesel engine issues. Conduct routine maintenance services, including oil changes, filter replacements, and inspections of diesel engines and associated systems. Troubleshoot and repair hydraulic, electrical, and diesel engine systems. Maintain accurate records of maintenance and repair activities. Drive and maintain the company-provided service truck. Perform maintenance and repairs to light trucks as needed. Ensure all work is performed safely and efficiently. QUALIFICATIONS: Minimum of 3-5 years of experience in heavy equipment and diesel engine maintenance and repair. Strong mechanical and technical skills, with a focus on diesel engines. Excellent troubleshooting and diagnostic abilities, especially with diesel systems. Familiarity with hydraulic and electrical systems. Light truck maintenance and repair experience is preferred. Ability to work independently and manage time effectively. Valid driver's license and a clean driving record. Post-secondary degree or certification in heavy equipment/diesel mechanics is preferred but not required. Experience with diagnostic tools. Familiarity with parts and electronic components of complex machinery and engines. Benefits Health Insurance Dental and Vision Insurance Life Insurance Paid Holidays Paid Vacation Year End Bonus 401K/Profit Sharing Short Term Disability Safety Training

What you will do Johnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America. JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve. At Johnson Controls you'll have the chance to work on light commercial and/or heavy commercial teams with the most advanced heavy commercial and cutting-edge industrial equipment. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun. How will you do it We are looking for skilled HVAC Mechanics who have practical work experience in their trade, (HVAC piping, plumbing, pipefitting and /or mechanical equipment service industry). Mechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and open-drive screw chillers. Perform maintenance, repair and replacement services on commercial heating and cooling systems. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard. Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Must be a member or willing to join the United Association of Journeymen and Apprentices of the Plumbing and Pipe Fitting Industry of the United States and Canada, AFL-CIO. Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Three (3) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry. This includes Rooftop units, pumps, fans, towers, boilers, chillers, compressors, plumbing. Mechanical shaft alignment using dial indicators, etc. of pumps, fans, Compressors. Able to use vibration equipment to trouble shoot drivelines. Travel maybe required 10% to 20% to support Branch Customers activities, trouble shooting, installation and repair. You will be required to pass a knowledge examination to assess proficiencies. Opportunity to invest in career development. You will enroll in training programs to gain knowledge in HVAC products and sales quoting. You will work with other local market mechanics as well as Servicemen and apprentices. Attention to detail through interpersonal, digital, and written skills. Able to write and communicate to the customer problem, cause, and corrective actions. Able to provide quotes to customers and participate in JCI's Service Plus Rewards program. Self-starter with a passion/ desire to learn and apply on the job. Prioritize safety in all forms Universal EPA refrigerants license, applicable state or local licensing, and valid driver's license Pay Range: $47.48 hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

EMCOR Services CES has an immediate need for a HVAC Journeyman Mechanic in Washington, DC. The HVAC Mechanic trouble shoots, repairs, installs, and performs preventative maintenance on all the HVAC systems within the Central Utilities Plant (CUP), and other buildings related to the contract by performing the following duties. This is a journeyman position and requires mechanical, electrical, and plumbing aptitudes. This is a part time position. The hours are 9:00 AM to 9:00PM Saturday and Sunday and Holidays. This position is covered by the CBA for Local 99. #EGS #LI-NS1 Essential Duties and Responsibilities: Monitors safe and efficient operations of HVAC/refrigeration systems in accordance with departmental requirements; corrects deficiencies according to PM/CM and manufacturers specifications. Conducts preventive and corrective maintenance on all HVAC and refrigeration systems, as well as fan coil or dx units, and other equipment as assigned. Installs and services new HVAC/refrigeration equipment. Perform all aspects of repairs to Air Handling Units (AHU) to include filter replacement, bearing replacement, motor replacement, belt replacement and proper alignment in accordance to OEM procedures. Coordinates inspections, repairs and installation in consultation with staff in affected areas to minimize disruption of operations. Complete Work Order and Preventative Maintenance (PM) paperwork in a timely and professional manner. Participates in the computerized maintenance management system for work and equipment documentation Participate in the building management system. Monitor design parameters for status and efficiency. Assist in programming recommendations for the system. Track refrigerant loss, procurement, and storage per government standards. Install, maintain and repair all field devices for the Temperature Tracking System. Participate in the testing of HVAC shutdown by duct smoke detectors. Performs heating, ventilation, and air conditioning (HVAC) maintenance on air conditioning units, fans, air handlers, water heaters, converters, duct work and system controls. Request assistance from plumbers, painters, electricians, carpenters, and Building Engineers when necessary. Coordinates inspections, repairs, and installation with staff and tenants in affected areas to minimize disruption of CNRIC operations. Ensures compliance with department safety and quality standards to optimize effective utilization of resources and productivity. Follow and implement standard Lock Out Tag Out procedures. Complete Corrective Maintenance and Preventive Maintenance (PM) work orders in a timely and professional manner. Attends weekly Tool Box safety meetings Obtain OSHA 10 General Industry Safety and Health certification. (EMCOR provided training) Qualifications: At least there (3) years of applicable experience. Must have a current Journeyman HVAC License Must have a current Universal CFC License. Must possess a valid Driver's License. Experience with Microsoft Office Must complete an OSHA 10 General Safety and Health training class (supplied by EMCOR). Must be able to read and understand architectural and mechanical drawings. Must be able to read and understand manufacture's submittals and literature. Review and provide recommendations to preventive maintenance inspections and procedures. Must be able to specify and order material and replacement parts for equipment as necessary. Must be able to understand and implement infectious control policies and procedures. Must be able to work a schedule of 9:00 AM to 9:00 PM Saturday and Sunday and Holidays. This position will require the successful candidate to show proof of a complete COVID-19 vaccination. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee is frequently required to stand. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee maybe exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; cold and heat; risk of electrical shock and vibration. The employee is occasionally exposed to the risk of radiation. The noise level in the work environment is usually moderate. Compensation: $43.39 per hour Other Compensation: NA Benefits: Health and Welfare Benefits consistent with the Collective Bargaining Agreement Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 1 year of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: Evening shift Night shift Weekly day range: Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. The pay range for this position is $18.00 to $23.00/hour. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

The primary purpose of the Tech III, MHE position is to oversee and repair material handling equipment (MHE). This role will oversee the safe operation, repairs, and preventative maintenance of MHE equipment including electric and propane industrial forklifts, pallet jacks, hi-low lifts, scissor lifts, scrubbers/sweepers, battery charging stations and cars, batteries, etc. Provide assistance to Supervisor/Manager of Maintenance to ensure assets are managed in accordance with the following: Equipment/parts manufacturers, equipment/parts suppliers, EPA, OSHA and applicable State and Local Codes. Job Description Benefits start on day one! Schedule: Sunday-Wednesday 7am-5:30pm Compensation: $28-$35/hour Check out a day in the life here: *********************************** You will contribute by: + Oversee and manage the repair of the MHE fleet including monitoring and trending, troubleshooting and repairs and preventative maintenance. + Conducting preventive maintenance (P.M.'s) within manufacturer's guidelines/specifications and established timelines to include oil changes, filter changes, calibration of equipment, belts changes, inspections, adjustments, lubrication, etc. + Concise reporting of required inspections, evaluations, P.M. procedures, etc. and clear communication with Management, etc. Responsible for logging time and materials into computerized maintenance management system (CMMS) on a daily basis in the form of repairs, P.M.s, etc. + Responsible for daily communication of all pertinent information regarding equipment operation and maintenance to departmental management and other maintenance teams. + Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. + Required to interpret and understand plans and specifications, schematics, operating and maintenance manuals, etc. for all systems being overseen. + Assist manager/supervisor in developing standard operating procedures, daily work schedules, and duty cycles for all repairs and maintenance for MHE and battery equipment. + Assist in managing outside battery, MHE, and electrical contractors conducting service, repair and new contract work. + Assist management in creation of budgets for individual projects, yearly capital and yearly operating expenses. + This position will also assist the battery technicians. Duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, and other general maintenance activities. + This position will also assist the building and refrigeration maintenance teams. Duties will include assisting in general building repairs, electrical troubleshooting and repairs, refrigeration systems repair and maintenance, and other general maintenance activities. + There may be times when support is needed at other facilities and travel may be asked of the associate. Environment + Warehouse: Perishable Warehouse (28F to 60F) Skills + Extensive experience with Crown, Raymond, and Toyota material. Manufacturer Certifications (Raymond, Crown, Toyota, etc.)handling equipment. + Detailed knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC systems, drive motors, power amps, electrical controls including PLC systems. Detailed knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, internal combustion motors, telescopic masts, reach mechanisms, steering systems, suspension systems, etc. + Building and HVAC: General knowledge of building (Dock doors and plates, electrical, HVAC systems, etc.) systems. + CMMS: Computerized Maintenance Management System experience for logging work orders and P.M's + Hydraulic systems, Electronic Systems, PLC/Low Voltage Control Systems + Physical abilities: Some travel, site inspections, equipment inspections, mechanical repairs and replacements, all which require good mobility, physical exertion, walking, bending, reaching, climbing ladders, carrying tools and parts, etc. + OSHA, ASE Certifications (Electrical, Mechanical, Braking Systems, etc.) Years Of Experience + 2-5: Relevant experience. + 4 years: MHE Maintenance Position. We Offer + Benefits available from day 1 (medical, dental, vision) + Company Matched 401-k + Paid training + Weekly Pay + PTO and Holiday Pay offered + Career Progression Opportunities + Tuition Reimbursement + Employee Health & Wellness program + Employee Discounts / Purchasing programs + Employee Assistance Program + C&S Offers $100 towards the purchase of safety shoes Every person matters. We keep our values alive through a culture that embraces differences and ensures that every person matters. The Fine Print This Job advertisement does not constitute a promise or guarantee of employment. This job advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of C&S Wholesale Grocers. Qualifications KPIs, Safety & Sanitiation, Technical Certification - Electrical Engineering Technology, Training & Development, Values & Teamwork, Warranty Shift 1st Shift (United States of America) Company C&S Wholesale Grocers, LLC About Our Company C&S Wholesale Grocers, LLC is an industry leader in supply chain solutions and wholesale grocery supply in the United States. Founded in 1918 as a supplier to independent grocery stores, C&S now services customers of all sizes, supplying more than 7,500 independent supermarkets, chain stores, military bases and institutions with over 100,000 different products. C&S also proudly operates and supports corporate grocery stores and services independent franchisees under a chain-style model throughout the Midwest, South and Northeast. We are an engaged corporate citizen, supporting causes that positively impact our communities. Working Safely is a Condition of Employment at C&S Wholesale Grocers, LLC. C&S Wholesale Grocers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. The Company provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Company: C&S Wholesale Grocers, LLC Job Area: Facilities - Maint Job Family: Facilities Job Type: Regular Job Code: JC0987 ReqID: R-265741

Forklift Technician - Pasadena, MD Schedule: Monday through Friday, 7:00 AM - 4:30 PM We are seeking a skilled and reliable Forklift Technician to join our Pasadena team. The ideal candidate will have extensive hands-on experience diagnosing, repairing, and maintaining a variety of forklifts and material handling equipment. This role requires a proactive individual who can identify mechanical and electrical issues, perform preventative maintenance, and ensure all repairs meet company and OSHA safety standards. Responsibilities: Diagnose equipment malfunctions on forklifts and other material handling equipment that are broken down or not operating to company standards. Perform comprehensive repairs including brakes, hydraulics, fuel systems, transmissions, engines, and electrical systems. Conduct routine and preventative maintenance checks to ensure customer compliance with OSHA and company standards. Utilize strong problem-solving skills to troubleshoot mechanical and electrical issues efficiently. Maintain a clean, safe, and organized work area at all times. Communicate effectively with customers and team members regarding service updates and equipment status. Requirements Requirements: Active driver's license with a clean driving record (required). Extensive experience working on forklift repairs, including hydraulic, mechanical, and electrical systems. Basic knowledge of LP (liquid propane) systems and electrical components. Strong diagnostic and troubleshooting abilities. Self-starter with excellent time management and attention to detail. Ability to work independently and in a team environment.

Job Description We are seeking a skilled Mobile Mechanic to join our team. The ideal candidate will have a passion for automobiles and possess expertise in diagnosing and repairing automotive issues, providing maintenance and performing recalls. This role offers an exciting opportunity to provide exceptional service to our customers. State of the art Full sized Ford Transit Van with everything you need to be mobile. Duties: - Diagnose hardware and software issues on various Ford/Lincoln models - Provide basic maintenance. Oil Changes, wipers, occasionally tires. at their home or work. - Perform software updates and perform various recalls. - Perform a quality control check before leaving their home or work. - Provide excellent customer service. Requirements: - Proficiency in automotive diagnostics and mechanical knowledge - Experience with power tools and hand tools for repair work - Familiarity with basic automotive needs. - Ability to maintain accurate records of repairs and inventory - Strong attention to detail and problem-solving skills - Previous experience in mechanic or diesel engine repair is a plus - Knowledge of Ford/Lincoln products. If you are self motivated mechanic who can provide great customer service we encourage you to apply for the Mobile Auto Technician position. Join our team and be part of a dynamic environment where your skills will be valued and developed.

Are you a skilled technician who loves working on equipment and solving problems? Fraza & Vitan Equipment is looking for an experienced Forklift Technician to keep our customers' operations moving. You'll service, repair, and maintain forklifts and material handling equipment-no two days are the same. Why You'll Love It Here: Top pay based on experience Company vehicle provided No weekends & flexible schedule PTO, medical, dental, vision, 401(k) with match Commission opportunities to boost your earnings What You'll Do: Diagnose and repair mechanical, electrical, and hydraulic issues Perform preventative maintenance to keep equipment in top shape Travel to customer sites-variety of work every day Ensure equipment is safe and meets standards Keep accurate records of work performed What You'll Need: 2+ years' experience in forklift or heavy equipment repair (electric, propane, diesel) Strong troubleshooting skills and safety focus Valid driver's license Take the next step in your career-apply today!

Who We Are At NPL, part of The Centuri Organization, our employees are part of an established team working to support America's natural gas utility and energy infrastructure. Working at NPL means you are joining a company with over 50 years of experience, long-standing customer relationships, and one that is deeply integrated into our host communities. Come grow your career with us and be a part of something bigger. We are seeking a Fleet Mechanic to support our operations by maintaining and repairing a variety of company vehicles and equipment. This role involves working on cars, trucks, off-road equipment, and small tools in a safe, efficient, and quality-focused manner. The ideal candidate is dedicated to safety, takes pride in their craftsmanship, and understands the importance of keeping our fleet running reliably. Compensation: $30+/hour What You'll Do * Perform diagnostics, maintenance, and repairs on vehicles and equipment, including: * Engines, transmissions, clutches * Suspension, steering, brakes, and HVAC systems * Electrical systems, fuel and ignition (gas and diesel) * Respond to breakdowns and perform emergency roadside repairs when needed. * Conduct preventive maintenance inspections to maximize safety, uptime, and lifespan of fleet assets. * Follow proper documentation procedures including mileage/hours, warranty parts, repair records, and parts ordering/billing. * Perform maintenance and repair welding on equipment. * Maintain a general understanding of DOT regulations * Support other fleet and shop duties as assigned by leadership. What You'll Have * School Diploma or equivalent * Minimum 5 years of experience repairing and maintaining cars, trucks, off-road equipment, and/or small engines. * Working knowledge of: * Automotive and diesel systems * Small engines and construction-related equipment * Ability to diagnose complex mechanical and electrical issues. * Strong communication skills and attention to detail. * General computer competency for work orders and service documentation. * Strong commitment to working safely at all times. What You'll Get * Join the Largest Natural Gas Distribution Contractor in the United States * Weekly Payroll * Paid, on-the-job training for technical skills * Employee Assistance program benefit * Health Insurance Plan benefit * Retirement Plan benefit Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Flexibility to work various schedules and stay late when necessary with little or no notice * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card * Join and maintain Union membership Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Washington DC

Human Resources announces a 1.0 FTE Roofer Mechanic. This is a 260-days, M-08 position located at Facilities & Operations. EDUCATION: Completion of tenth grade (preferably completion of high school), including some courses in industrial arts and/or shop mechanics, supplemented by training equivalent to an apprenticeship in the trade. LICENSE/CERTIFICATION: Valid driver's license; NOTE: All APS employees authorized to drive APS vehicles are subject to either Omnibus Transportation Act drug and alcohol testing procedures (if required to possess a CDL) or the Arlington Public Schools Alcohol and Drug testing procedures (if CDL is no required). PHYSICAL ATTRIBUTES: Possession of the strength and dexterity and fine and gross motor skills required to perform all essential functions, including lifting and carrying heavy objects; balancing self, materials and tools on high and/or slanted surfaces; assembling and disassembling scaffolds and equipment; and operating or utilizing all tools, equipment and vehicles. Work requires significant time spent standing, bending, stooping, working in tiring positions, and working from ladders or scaffolds. HAZARDS/UNUSUAL DEMANDS: Work involves working indoors and outdoors under a wide range of climatic conditions. Exposure to harmful fumes and sprays require use of safety goggle masks, gloves and proper ventilation. Work is performed on ladders, scaffolds, and rising platforms to a height of 40 feet. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES (The following may not include all the required skills or duties performed): Knowledge and ability to operate a broad range of power and hand glazier, roofing, carpentry and sheet metal fabrication tools and equipment; Knowledge of the common procedures, materials, hazards and safety precautions associated with roofing, glazing, and related construction activities, and ability to respond appropriately in hazardous situations; Knowledge of national, state and local codes and regulations relevant to trades; Ability to follow and give oral and written instructions, and to read and interpret plans, diagrams, drawings, prints, schematics, etc.; Ability to use arithmetic computations to measure, calculate quantities and cost, etc., and ability to maintain records; Ability to develop and maintain good leadership and interpersonal relationships; Reliable, flexible and dependable ESSENTIAL FUNCTIONS OF THE CLASS (May not include all duties performed not all incumbents perform all essential functions delineated): Performs semiskilled level maintenance, repair, and construction tasks in the glazing and roofing trade; Attends formal courses or performs on-the-job training tasks equivalent to apprenticeship training; Reads and interprets blueprints, sketches, technical instructions and manuals.

Applicants must have an Active Top Secret/SCI US Government clearance with polygraph. Note: US Citizenship is required to maintain a Top Secret/SCI clearance with polygraph. The contractor will be responsible for the proper repair and maintenance for a large fleet of forklifts and related equipment of various brands (predominately Raymond). The forklift fleet consists of a variety of electric, gas-, and diesel-powered units designed for interior and exterior building use. The contractor shall be responsible for maintaining a comprehensive maintenance schedule, obtaining approval for the schedule from appropriate government focal points, and adhering to the schedule in order to ensure all forklift units are mechanically ready for use and safe to operate. The contractor shall manage a spare parts inventory and make all levels of repairs when necessary. The contractor will also be responsible for repairing and maintaining pallet jacks and carts. Duties/Tasks and Responsibilities Schedules, prioritizes, inspects, and repairs forklifts, pallet jacks, and carts Determines, within prescribed value range, when a major component/ assembly is to be repaired, rebuilt, replaced or discarded Responsible for assisting with the purchasing of parts and services Required to maintain fleet and training vehicles; and prepares written estimates on cost and labor time for corrective repairs. Interacts with customers to keep them informed of status of vehicles, repairs needed, etc. Based on assignment, independently performs corrective maintenance and repairs to the fleet. Informs government focal point if a task cannot be safely performed alone. Inspects, diagnoses and isolates vehicle and equipment malfunctions; troubleshoots, traces and locates defects and/or causes of mechanical problems to determine type and extent of necessary repairs. Repairs all assigned forklifts and equipment to ensure they are safe and dependable. Inspects and tests equipment for mechanical defects, and replaces worn parts. Removes, replaces, adjusts, or cleans defective parts or components Perform oil changes, check fluids, diagnose tread wear, charge and repair batteries and trouble-shoot problems. Inspects/replaces hydraulic lines/hoses as needed. Ensure braking and electrical systems are optimal. Utilizes appropriate techniques and procedures in accordance with manufacturer's specification Identifies necessary parts, equipment and supplies needed to complete repair or preventative check. Road tests vehicles during and occasionally upon completion of maintenance/repair work. Responds to emails and telephone calls. Performs other related duties as required or as directed by Supervisor regarding forklift and equipment maintenance. Knowledge, Skills, and Abilities Extensive knowledge of the operating systems used in forklifts and associated hydraulic, pneumatic, and electrical systems. Extensive knowledge of the practices and tools used in the maintenance and diagnostics of forklifts and equipment. Considerable knowledge of computer, electrical, transistorized and other non-mechanical systems and how they tie-in with and affect the operation of mechanical systems. Considerable knowledge of the full range of tools, equipment, test procedures and practices used in the repair and preventative maintenance of forklifts. Excellent interpersonal and customer service skills. Experience diagnosing complex mechanical and related malfunctions. Expertise in reading technical manuals, references and specifications and service and recall bulletins. Written communication skills necessary to write routine correspondences, maintenance logs and order forms. Expertise in how to operate a forklift, power tools, wrenches, diagnostic equipment, and jacks. Working knowledge of computers, including Microsoft Access and Microsoft Office Suite. Adaptability to prioritize and schedule multiple work requirements. Flexibility in work schedule. Representational skills necessary to interact with outside vendors. Working knowledge of diesel, gas, and electric mechanics. Experience welding simple parts. Work Environment The work is usually performed inside on concrete surfaces where there is exposure to drafts, noise, and fumes from vehicles. Forklift technician - Senior occasionally perform work outside under adverse weather conditions. They are continually exposed to dirt, dust, and grease, and to the potential for burns, chemical irritations, shocks, bruises, cuts, and strains. To reduce dangers and irritations from these conditions, they follow prescribed safety practices and use safety equipment such as safety shoes and glasses, and respirators. Tools used in this occupation: Hand and power tools Scanners Modular diagnostic information systems Welding equipment Lifts Minimum Qualifications Active TS/SCI Clearance with Polygraph Experience: Ten (10) years of experience in the problem diagnosis, repair and maintenance of a wide variety of forklift maintenance. Education: High school Diploma or GED equivalent. Special Certifications: Certified in the safe operation of forklifts by the Sponsor within 30-days of commencing work and every 24-months as required. Certified maintenance on Raymond brand forklifts. Other pertinent forklift maintenance certifications. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Diesel Mechanic 32.00-36.00 per hour LANDOVER, MD Description Diesel Mechanics Landover, MD Hourly Pay: $32.00 - $36.00 per hour (based on experience) $2500 Sign on Bonus Shift/Schedule: Mid-Shift Tues-Fri 11am- 7:30pm ;Saturday 9am-5:30pm 1st Shift Monday- Friday 3am-11:30am Must have diagnostic experience Aim's company culture has been nationally recognized by Newsweek and The Wall Street Journal. We offer high, consistent pay in a stable work environment. Aim has spent 40 years building a workplace where employees feel empowered, valued, and respected every day! Benefits for Employee & Family: Anthem Blue Cross/Blue Shield Coverage 401K and Company Match Paid Time Off Company Paid Life Insurance Short-Term/Long-Term Disability Room for growth! Aim promotes from within! Click to apply or contact a recruiter with questions by calling ************. Pay Range: 32.00-36.00 per_hour, General Benefits: Benefits for Employee & Family: - Anthem Blue Cross/Blue Shield Coverage - 401K and Company Match - Paid Time Off - Company Paid Life Insurance - Short-Term/Long-Term Disability Requirements 3+ years diesel mechanic experience required Must Have Tools/Toolbox CDL and/or ASE Certifications preferred Aim Transportation Solutions is a Top 30 Logistics Company! We are family-owned and financially strong. Aim Transportation Solutions has been in business for over 40 years and has grown to 1,000+ employees providing service nationwide. For more information about Aim Transportation Solutions, visit *************** #aimkean #mechjob Date posted: 12/16/2025

We are seeking a skilled Mobile Mechanic to join our team. The ideal candidate will have a passion for automobiles and possess expertise in diagnosing and repairing automotive issues, providing maintenance and performing recalls. This role offers an exciting opportunity to provide exceptional service to our customers. State of the art Full sized Ford Transit Van with everything you need to be mobile. Duties: - Diagnose hardware and software issues on various Ford/Lincoln models - Provide basic maintenance. Oil Changes, wipers, occasionally tires. at their home or work. - Perform software updates and perform various recalls. - Perform a quality control check before leaving their home or work. - Provide excellent customer service. Requirements: - Proficiency in automotive diagnostics and mechanical knowledge - Experience with power tools and hand tools for repair work - Familiarity with basic automotive needs. - Ability to maintain accurate records of repairs and inventory - Strong attention to detail and problem-solving skills - Previous experience in mechanic or diesel engine repair is a plus - Knowledge of Ford/Lincoln products. If you are self motivated mechanic who can provide great customer service we encourage you to apply for the Mobile Auto Technician position. Join our team and be part of a dynamic environment where your skills will be valued and developed.

Job Description Are you a skilled technician who loves working on equipment and solving problems? Fraza & Vitan Equipment is looking for an experienced Forklift Technician to keep our customers' operations moving. You'll service, repair, and maintain forklifts and material handling equipment-no two days are the same. Why You'll Love It Here: Top pay based on experience Company vehicle provided No weekends & flexible schedule PTO, medical, dental, vision, 401(k) with match Commission opportunities to boost your earnings What You'll Do: Diagnose and repair mechanical, electrical, and hydraulic issues Perform preventative maintenance to keep equipment in top shape Travel to customer sites-variety of work every day Ensure equipment is safe and meets standards Keep accurate records of work performed What You'll Need: 2+ years' experience in forklift or heavy equipment repair (electric, propane, diesel) Strong troubleshooting skills and safety focus Valid driver's license Take the next step in your career-apply today! Powered by JazzHR DEOy4fpIUm

Imagine your ideal job. Now add bowling. And arcade games. And parties every day of the week. This isn't any ordinary workplace; it's the beginning of a bowled new career as a Mechanic with Bowlero Corp. . WHAT OUR MECHANICS DO Our Entry-Level Mechanics (or C-Mechanics) make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a desire to learn and grow, then you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY Abide by and maintain all safety procedures as required by Bowlero Corp and OSHA Keep center equipment maintained and in proper working order Adhere to all outlined preventative maintenance programs Clean and organize the shop and machine area Complete the Bowlero Corp C-Mechanic training program within the prescribed timeframe WHAT IT TAKES High School Diploma with a focus on algebra, geometry, and/or applied mathematics (Optional) Solid communication skills Strong team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/PHYSICAL DEMANDS: Typical entertainment center environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. THE BOWLERO CORP TEAM With over 350 entertainment destinations spanning North America, our portfolio includes renowned brands like Bowlero, Lucky Strike, AMF, and the Professional Bowlers Association (PBA). As a company, we are committed to diversity, dedicated to our guests, and devoted to making the work-life experience a joy for one another. When work is this much fun, it doesn't feel like work at all. Join our team of over 12,000 associates and experience the fulfillment of being part of the Bowlero family. The approximate pay range for this position is $18.50-$22.00/hour. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and abilities as well as geographic location of the position. Bowlero offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

Diesel Technician 30.00-40.00 WOODBRIDGE, VA Description $10,000 Sign on Bonus (NEW) Wages have been increased! This is a GREAT Job! Apply Now! Manassas, VA Hourly Pay: $30.00- $40.00 per hour (based on experience) Schedule:1st Shift Monday- Friday 8:00am-4:30pm Proficient in Truck diagnostic software. Reefer knowledge a plus but not required. Knowledge in truck powertrain systems Aim's company culture has been nationally recognized by Newsweek and The Wall Street Journal. We offer high, consistent pay in a stable work environment. Aim has spent 40 years building a workplace where employees feel empowered, valued, and respected every day! Benefits for Employee & Family: Anthem Blue Cross/Blue Shield Coverage 401K and Company Match Paid Time Off Company Paid Life Insurance Short-Term/Long-Term Disability Generous Employee Referral Bonuses Click to apply or contact a recruiter with questions by calling ************ Pay Range: 30.00-40.00 per_hour, General Benefits: Requirements 2+ years diesel mechanic experience required Service/Maintain Heavy Duty trucks Must Have Tools/Toolbox CDL and/or ASE Certifications preferred. Aim Transportation Solutions is a Top 30 Logistics Company! We are family-owned and financially strong. Aim Transportation Solutions has been in business for over 40 years and has grown to 1,000+ employees providing service nationwide. For more information about Aim Transportation Solutions, visit *************** #aimman #mechjob Date posted: 12/16/2025