Diesel mechanic jobs in Carlsbad, CA

s an Diesel Mechanic, you will provide technical support for working in material condition assessment, corrective maintenance, fault diagnostics, recommendations, testing, and process improvement to Southwest Regional Maintenance Center for the repair of Navy ship diesel engines. This position will be under limited supervision. Clearance Required: Must be a US Citizen with an Active Secret Clearance Essential Functions and Responsibilities: Reviews or prepares Process Control Procedures (PCPs) for diesel engine work. Briefs ships' crew and managers on the status of assigned tasks and/or repairs. Provides on-the-job training to ship crews when conducting maintenance and/or critical repairs. Use technical knowledge and experience to troubleshoot faults and casualties on various diesel engines and associated auxiliary equipment and systems. ssist in identifying causes of equipment/system failure at the component level. Provides technical assistance and on-the-job training to active duty and other government personnel relative to the operation, maintenance, grooming, overhaul, and repair of diesel engines. Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions Perform non-routine assignments involving relatively limited scope through larger, more diverse repairs. Perform tests to evaluate engine and/or component performance in accordance with technical guidance utilizing specified tool and/or of instruments. nalyzes test results, prepare reports on findings and provide recommendations. Performs complex operational test and fault isolation on systems and equipment. Gathers and maintains specified records of engineering data such as tests, drawings, etc. Required Education, Skills, and Experience: High School Diploma or equivalent 4+ years of related experience with shipboard systems and associated systems. Strong technical comprehension with the ability to read and interpret manuals and standards. Effective communication skills and ability to work with minimal supervision. Formal training in diesel engine operation, maintenance & diagnostics from any of the following Navy Diesel Engine Training Courses or Original Equipment Manufacturer schools relevant to: Colt Pielstick, Model PC 2.5 Colt Pielstick, Model PA6B STC Caterpillar, Model 3512B General Motors, Model EMD 645E merican Locomotive (ALCO), Model 251-C Isotta-Fraschini, Model 36SS6V MTU, Model 20V 8000 M90 Caterpillar, Model 3608 Proficiency with Microsoft Office and related technical applications. Experience with Formal Work Procedures (FWPs) and Controlled Work Procedures (CWPs) IAW JFFM may be substituted for PCP experience. Knowledge of 3M Preferred Education, Skills, and Experience: Navy NEC: 733B, U13A, U24A, U25A, U26A. Knowledgeable in Navy QA and Planning procedures Knowledgeable in Navy Quality assurance practices and Joint Fleet. Maintenance Manual (JFMM) chapters relating to maintenance of diesel engines. Essential Functions and Responsibilities: OSHA 10 CPR Physical Demands and Expectations: Regular physical activity, including walking, climbing stairs, and standing; frequent periods of prolonged sitting may be required. bility to work in an industrial shipboard/shipyard environment, climb shipboard ladders and wear all required safety equipment. ble to lift (up to 50lb), carry, and transport heavy equipment and materials required for the job. Maneuvering around tight spaces in a shipboard environment bility to speak, read, hear, and write, with or without assistance. bility to use phone and computer systems, copier, fax, and other office equipment. This position description re present s a summary of the major components and requirements of the outlined job. Other duties and responsibilities may be assigned or required as business needs dictate. Questions regarding this description should immediately be addressed to the department manager or to Human Resources. LIFE CYCLE ENGINEERING Life Cycle Engineering (LCE) is a privately held, employee-owned company with an emphasis on "doing the right thing the right way", which applies to the way we treat our customers and employees. We are proud to have been recognized as "Best Place to Work" in Engineering and in many states and local communities in which we work! Learn more below and at *********** . Mission Our mission is to enable people and organizations to achieve their full potential. s a professional services organization, our mission is focused on our clients' people and organizations. It is our company's cornerstone belief that we will not lead the industry in assisting our clients unless we excel at helping our own people and teams reach their full potential. Culture Our corporate culture encourages personal and professional growth because LCE's success depends on the talent, innovation, professionalism, and commitment of its employees. LCE is a strengths-based organization focused on turning individual talents into strengths and then turning individual strengths into organizational performance that supports our clients' success. Benefits ffordable Medical/Dental/Vision Plans for employees and their families Free Employee Life and Disability Insurance, with supplemental coverage options available Health Savings Account and Flexible Savings Account options Company matched 401(k) & company-funded Employee Stock Ownership Program (ESOP) Paid Vacation, Holiday, Sick Leave Continuing Education and Professional Development programs at all levels Flexible Schedules and Relaxed Dress Code Employer-sponsored events, social collaboration, and open communication Free access to an extensive online training library, including certification prep Bonus Program for outstanding contributions, Employee Referral Program, numerous Recognition Opportunities, and more... *Benefits may vary by business unit and location. Life Cycle Engineering is an equal opportunity employer and makes all employment decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, age, disability, genetic information, application for or service in the military or status as a disabled veteran or veteran, because of or on the basis of pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation, and any other status protected by applicable state or federal law.

Epsilon Systems Solutions is seeking a full-time Diesel Mechanic in San Diego, CA. Job Summary: Under minimal supervision, provide semi-professional technical support for working in material condition assessment, fault diagnostics, corrective maintenance, corrective recommendations, testing, and process improvement. Work pertains to providing support to a San Diego-based customer for the repair of Naval ship diesel engines. Duties and Responsibilities: Reviews or prepares Process Control Procedures (PCPs) for diesel engine work. Briefs ships' crew and managers on the status of assigned tasks and/or repairs. Provides on-the-job training to ship crews when conducting maintenance and/or critical repairs. Use technical knowledge and experience to troubleshoot faults and casualties on various diesel engines and associated auxiliary equipment and systems. Assist in identifying causes of equipment/system failure at the component level. Provides technical assistance and on-the-job training to active duty and other government personnel relative to the operation, maintenance, grooming, overhaul, and repair of diesel engines. Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions Perform non-routine assignments involving relatively limited scope through larger, more diverse repairs. Perform tests to evaluate engine and/or component performance in accordance with technical guidance utilizing specified tool and/or of instruments. Analyzes test results, prepare reports on findings and provide recommendations. Performs complex operational test and fault isolation on systems and equipment. Gathers and maintains specified records of engineering data such as tests, drawings, etc. Required Qualifications: High School Diploma or equivalent. Minimum 4 years work related experience. Minimum 4 years specialized experience assessing and diagnosing faults with Navy diesel engines. Ability to obtain and maintain a DOD security clearance. Formal training in diesel engine operation, maintenance & diagnostics from any of the following: Navy Diesel Engine Training Courses or Original Equipment Manufacturer schools relevant to: Fairbanks Morse Defense/Colt Pielstick PC 2.5 Fairbanks Morse Defense/Colt Pielstick PA6B STC Fairbanks Morse Defense 8 -1/8 Opposed Piston Marine Engine Caterpillar 3608 GM EMD 645E MTU Model 20V 8000 M90 Effective oral and written communication. Sound interpersonal skills needed to interface, coordinate with company personnel, customers, and outside contacts, if appropriate Basic computer skills. Experience with Formal Work Procedures (FWPs) and Controlled Work Procedures (CWPs) IAW JFFM may be substituted for PCP experience. Preferred Qualifications: Navy NEC: 733B, U13A, U24A, U25A, U26A. Knowledgeable in Navy QA and Planning procedures Knowledgeable in Navy Quality assurance practices and Joint Fleet. Maintenance Manual (JFMM) chapters relating to maintenance of diesel engines. Pay Range: The pay range for this role is $23.31 - $26.07 Hourly. This is a reasonable estimate for this role. Individual salaries are determined by various factors including, but not limited to, business considerations, local market conditions, internal equity, and candidate qualifications, such as skills, education, and experience. ADA Notations: Requires walking, reaching, sitting, and concentration in the presence of occasional noise. Ability to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships). Ability to lift, carry, and move objects up to 50 lbs. Office environment, waterfront, and shops. Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents • Company paid Dental and Vision • 401(k) with company match • Short-term and Long-term disability - Company paid • Life Insurance and AD&D - Company paid • Voluntary Spouse and Child Life Insurance • Paid time off with company holiday • Tuition Reimbursement • Employee Assistance Program (EAP) *Benefit eligibility is set forth in benefit plan documents and organization policies. Description Position Location: Chula Vista, CA Summary: Performs routine mechanical work on U.S. Navy shore facilities, waterborne vessels, surface ships and/or submarines. Tasks will be related to inspections, repairs, modernization and/or alterations. Duties and Responsibilities include the following. Other duties may be assigned. Proficient in the use of precision measurement equipment including scales, vernier calipers, micrometers and torque wrenches. Experienced with use of torque wrench extensions and multipliers. Proficient in the use of portable drill presses. Perform disconnects and connections of mechanical joints. Removes and installs various equipment using sound engineering practices. Overhauls various pumps and valves. Ability to trouble shoot and determine faulty equipment, determine cause of malfunction and determine best repair method. Hydrostatically tests pumps, valves and piping. Have the ability to read and follow technical manuals for various equipment. Fills our objective quality evidence (OQE) forms. May lead a small team of mechanics. Performing duties as Firewatch. Assists with cleaning up work area. Employees may be required to travel to work to other locations. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: Must have completed a formal related course of study in trade through either a community college, technical or trade school, military training, formal company training program or an apprentice program. Must have 1+ years of verifiable experience as a mechanic in an industrial environment (i.e., shipbuilding, ship repair or nuclear power plants). Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Equipment: General Hand Tools Torque Wenches Precision Measuring Instruments Knowledge, Skills and Other Abilities: Must be able to read and interpret blueprints, sketches, written technical instructions and manuals. Must possess working knowledge of shipboard operating requirements. and understand material safety data sheets (MDS). Able to follow safety procedures. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is working on a ship. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $20.00 - $45.55 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-25-00040 This position is currently accepting applications.

Required Travel: 26 - 50% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $53,000.00 - $63,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary Join HII as we keep the world's most powerful Navy afloat! Join our Elevator Support Unit (ESU) as a Marine Mechanic! This position will support contracted skilled trades work on Weapon Elevators and Aircraft Elevators and their systems on U.S. Navy ships. Travel within and outside of the continental United States may be required. This is a full-time position, located in San Diego, CA. What You Will Do Installs, operates, maintains, repairs and modifies shipboard elevator mechanical and hydraulic equipment. Performs a variety of maintenance and technical support on elevators and elevator doors such as equipment, integrated systems and subsystems, and software at customer and/or field locations. Analyzes and evaluates elevator operations and related performance. Troubleshoots, diagnoses malfunctions, and grooms elevators to eliminate problem in minimum time. Installs, upgrades and removes elevator and elevator door components ensuring coordinative engineering field change. Applies comprehensive understanding of production and processes toward completion of assignments. Responsible for interfacing with customers, managing subcontractors and ability to provide work direction to others. Develops and uses technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports. Schedules, reports and briefs customers and senior management. Performs duties outside of specialty in order to complete installation or work assignment. What You Must Have High School education, or Trade School or equivalent, and 4 years of related experience. Must provide own hand tools as designated per trades specialty. Must have experience performing troubleshooting, preventative maintenance and testing of mechanical systems. Must be able to read drawings and schematics. Must be able to conduct on-site installation of equipment while following established safety, qualify control & testing procedures. Must be able to calibrate and make minor repairs on tools/equipment. Must be able to obtain and maintain base access credentials. Must be able to obtain and maintain a DoD Security Clearance. Must be a U.S. Citizen. Preferred: Bonus Points For Experience related to maintenance and repair of shipboard aircraft elevator and/or ordnance handling equipment and vertical package conveyors preferred. Experience in the operation, repair and maintenance of marine electro-mechanical and/or hydraulic systems highly desired. Prior Shipboard experience preferred. Candidates who hold a current or active DoD secret clearance or higher preferred. Candidate with related technical training, degrees and/or certifications preferred. Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-###-#### for assistance. Press #3 for HII Mission Technologies.

Amee Bay, LLC, a subsidiary of Three Saints Bay, LLC, and a government-industry leader is looking for a Naval Shipboard Marine Mechanic to join our Team in San Diego, CA. Shipboard Electricians perform a wide variety of tasks depending on the needs of the company. Position Responsibilities: Knowledge of maritime mechanical systems. Navy tag-out, WAF programs, and applicable Naval procedures/instructions. Maintain QWI and associated forms. Implements and monitors OSHA safety. Demonstrated ability to supervise junior personnel; Understanding of shipboard mechanical machinery equipment and systems such as main propulsion machinery, auxiliary machinery, and hydraulics; Ability to troubleshoot, disassemble, and inspect Hull, Mechanical, and Electric (HM&E) equipment; Ability to disassemble, clean, assess and inspect, reassemble, and operationally test mechanical systems; Knowledge of mechanical systems components such as valves, bearings, gears, remote operators, couplings, system alignment, etc; Fully versed in the use of all types of precision measuring instruments, such as calipers, micrometers, dial indicators, and torque wrenches. Ability to read and interpret blueprints, sketches, written technical instructions, and manuals, make red-line drawings, and design recommendations. Position Requirements: US Citizenship Must be able to obtain and maintain active Secret Security Clearance and Base Access; Candidates currently possessing an Active Secret Clearance are preferred. Experience levels: Minimum ten (10) years experience for 1st Class designation; Minimum five (5) years experience for 2nd Class designation; Minimum one (1) year experience for 3rd Class designation; No previous experience for Craftsmen designation. High School Diploma or equivalent. Navy 'A' / 'C' school(s) or completion of a vocational, maritime, or equivalent Journeyman training program. Valid U.S. Driver's License. Must pass drug screening. Candidates must furnish the hand tools required for this position. Preferred Experience, but not Required. Prior military experience directly related to the position or prior experience in the Maritime Industry. Prior experience with US Navy Auxiliary equipment including, but not limited to; Cargo/Weapons Elevators, Aircraft Elevators, Deck Edge Doors, Hanger Bay Divisional Doors, Vertical Package Conveyors, 5-inch Ammunition Strike down Equipment, CIWS Mount Skip boxes. Prior experience working on Marine Diesel Engines Prior experience working on Gas Turbine Engines Position is located in San Deigo, CA. Apply online at: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

You will serve as a MARINE MACHINERY MECHANIC LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help You will apply a variety of methods, procedures, and techniques to layout, install, align, overhaul, repair, and maintain numerous types of marine machinery, equipment, and systems. You will utilize and apply standard formulas, shop mathematics, trade theories, and industry practices in calculating needed materials and problem solving. You will utilize various test equipment and measuring devices such as alignment scopes, verniers, micrometers, precision levels, transits, strobe tachometers, bearing bridge gauges, flow meters, hydrostatic testers, and vibration analyzers. You will set up and operate machine tools such as small lathes, milling machines, drill presses, and precision grinders to manufacture component parts or remachine existing parts such as bushings, bearings, seals, couplings, and pistons. You will utilize machine tools for onsite milling, grinding, boring, facing, and drilling, and the use of various other portable machine tools to accomplish repairs. You will disassemble, repair, and rebuild components and assemblies such as shafts, propellers, rudders, engines, and sea valves. You will operate machinery and equipment for launching and arresting gear systems, missile handling and launch systems, torpedo tubes, periscopes, antennas, sonar, and radar equipment, and shipboard equipment. You will interpret and apply the requirements contained in technical manuals, shop directives, multiview blueprints, and other documents in determining critical dimensions and key reference points. Requirements Help Conditions of employment Must be a US Citizen. Must be determined suitable for federal employment. Must participate in the direct deposit pay program. New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. Males born after 12-31-59 must be registered for Selective Service. This may be a bargaining unit position. You may be required to successfully complete a pre-appointment physical examination. You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing. You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift. Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs. This position may require exposure to high noise levels. This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time. This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required. Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: Special Schedules/MS_A143_143_Seattle_Everett_Tacoma,Washington.pdf CA: Special Schedules/AM_A017_017_San_Diego,California.pdf Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Schedules/survey-sch/044/044R-06Aug2024.pdf Portsmouth Naval Shipyard: ME: Schedules/survey-sch/087/087R-02Jan2025.pdf CA: Schedules/survey-sch/017/017R-02Jan2025.pdf Norfolk Naval Shipyard: VA: Schedules/survey-sch/140/140R-09Jul2024.pdf PA: Schedules/survey-sch/115/115R-02Jan2025.pdf Trident Refit Facility, Bangor, WA: Special Schedules/MS_A143_143_Seattle_Everett_Tacoma,Washington.pdf This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Chris Amato's Body Werks (CABW) has been providing expert auto body repair services since the early 1990s, specializing in European and Luxury automobiles. Founded by Chris and Lisa Amato, CABW is dedicated to delivering high-quality repairs and exceptional customer experiences. The team continuously strives to meet the founders' vision of excellence with every customer interaction. Role Description This is a full-time on-site role for an Automotive Technician, located in Oceanside, CA. The Automotive Technician will be responsible for performing vehicle maintenance, conducting oil changes, and executing automotive repairs. The technician will also handle general maintenance and repair tasks, as well as work on suspension systems. Qualifications Vehicle Maintenance skills, including Oil Changes Automotive Repair skills, focusing on Maintenance & Repair Suspension system experience Strong diagnostic and problem-solving skills Ability to work independently and as part of a team ASE certification is a plus High school diploma or equivalent, with relevant technical training

Does this position interest you? You should apply - even if you don't match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourageyou to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including: • Observing and assisting in installing and repairing auto glass • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing • Providing additional services & products • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques. • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday. • Performs other duties as assigned • Complies with all policies and standards What you'll get: Monday Thru Saturday with a day off the the week • Competitive weekly pay starting at $25.50/hour, increasing to $30.25/hour after training and certification. • Earn $5/set of wiper blades when added for customer safety. • Technician career levels determined based on performance metrics demonstrating efficiency, quality, and customer satisfaction. • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days. • Program to buy additional PTO or sell unused time up to 16 hours. • Up to $5,250 annually in tuition reimbursement. • Paid training and all the tools and resources you'll need to be successful. • View all our health, wealth, and life offerings at ************************* #LI-JR1 Education Qualifications • High School Diploma GED/Equivalent Preferred • Valid state-issued driver's license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds. • Ability to stand for extended periods, work in tight spaces, bend and twist body • Ability to use a variety of hand tools and power tools safely and effectively • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting” • Ability to work scheduled days, with flexibility on start and end times to accommodate customer's needs • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues • Problem-solving and ability to trouble-shoot issues, independently and collaboratively • Ability to read, write and interpret the English language and technical directions • Ability to communicate orally (via phone) and written (via computer or other electronic means) • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). This in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we're proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability.

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Performs a variety of semi-skilled, skilled, technical, and administrative work in the planning, scheduling, maintenance of vehicles and equipment within Fleet Services. Primary Duties/Responsibilities: Diagnoses and locates mechanical problems on fleet vehicles and equipment. Repairs brakes, engines, electrical, fuel, hydraulic, transmission, ignition, air, exhaust, axle assemblies and related systems using a variety of hand, electric, air-driven tools, and diagnostic instruments. Performs cutting and welding in performance of body repair, touch up and related work. Performs routine and preventative maintenance, lubrication and minor adjustments on vehicles and related equipment. Promptly reports any operational problems with machines or equipment to Lead or Supervisor. Inspects vehicles and equipment for compliance with applicable policies, rules and regulations for road-worthiness and safety. Takes corrective action per procedure in assigned area. Investigates vehicle / equipment damage, completes forms, participates and completes remedial actions to prevent further occurrences within assigned deadlines. Performs all duties in compliance with Veolia Water safety policies and guidelines and makes others aware of potential hazards in the work area. Practices good housekeeping. Participates in cleaning of work areas machinery, tools and equipment in Fleet Services areas. Frequent contact with internal personnel in order to understand maintenance needs. Contact with vehicle and equipment suppliers to obtain repair and maintenance instructions. May assist with maintaining parts, spares and maintenance inventory. Participates in coverage for after hour's emergency calls for Fleet Services as assigned by Lead Mechanic. Participates in snow and ice control program with the Public Works Department as needed on an emergency basis. Performs other duties as assigned. May assist with orienting or training new or less experienced personnel. Work Environment: Spends 100% of time in shop or field environment. Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather. Company service vehicles are used as required. Travels 1 - 2 times per year for company provided training. Possible Work Hazards : May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, moving mechanical parts and vehicles, heavy machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards. Qualifications Education/Experience/Background: High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions. Entry level but some experience is preferred in vehicle and equipment maintenance, Fleet Management or a related field. Experience in and exposure to repair and maintenance of the following: pickup trucks, one, two, five and ten-ton dump truck, snowplow, salt spreader and trailer equipped trucks preferred. Knowledge/Skills/Abilities: Ability to perform basic mathematical calculations. Must demonstrate ability to accurately record data from meters, gauges, scales, panels, computer consoles and other equipment. Must have ability to safely operate motorized vehicles and construction-type equipment, drill press, bench press, grinder, band saw, electric charging systems testers, digital and computerized diagnostic instruments, hydraulic jacks and lifts, air tools, wrenches, drivers, wheel and tire replacement systems, air compressor, lubricants, greases, coolants and related fluid, cleaning equipment, portable radios, telephones, computers, copiers, printers and other equipment and devices related to Fleet Services activities. Good verbal and written communication skills are necessary. Must have ability to operate Computer Maintenance Management System (software). Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily. Must demonstrate proficiency in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.) Must provide own hand tools used in the normal performance of the job and includes, but not limited to; wrenches, socket sets, drivers, hammers, chisels, storage cabinets and toolboxes. Replacement of hand tools due to damage or breakage in the normal performance of the job will be reimbursed after approval by the Plant Manager. Must be able to participate in afterhours emergency callouts. Required Certification/Licenses/Training: Specialized training in vehicle and equipment maintenance with knowledge and experience in the areas of automotive and truck mechanics, gas and diesel engines, transmissions, hydraulics, valves, generators and welding and body repair. Must possess a valid Class “A” Commercial Driver's License (CDL), with tanker endorsement and a safe driving record. Employee Orientation, Departmental Operating Procedures, OSHA and Quality Training. Veolia equipment training. Contributes and participates in required and recommended safety programs and training sessions. Obtain and continue ASE certification in Master Automotive Technician or Master Medium / Heavy Duty Truck Technician within three years from date of hire. HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification. Work toward higher level water / wastewater treatment certification. Forklift Certification if required by site. Physical Requirements: Amount of time spent - Standing 75%, Walking 25%. Requires close visual and hearing observation to detect non-conformance and equipment malfunction. Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms. Works in various positions; works on ladders, and works with hands extended above and below head and body up to 40 minutes using hand and power tools weighing up to 15 pounds. Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet. Occasional stooping, bending or kneeling and entering confined spaces. Additional Information Pay Range: $45.00 to $50.00 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

4 Corners Repair & Restoration, is your one-stop-shop for equipment repair and restoration services. Our team of professionals provides the best solutions for your equipment needs. From preventive and corrective maintenance for equipment and fleet company vehicles to mobile services for sand blasting, polymeric powder coating and spray on bed liner, we've got you covered! Visit us today at 4cornersrepairrestoration.com Job Overview We're on the lookout for a dependable and experienced Shop Mechanic who takes pride in their craft. If you're passionate about diagnosing and fixing vehicles and equipment, thrive in a fast-paced environment, and enjoy working as part of a dedicated team-this is the role for you. What You'll Do: Perform routine maintenance and repairs on various vehicles, machinery, and equipment. Diagnose and troubleshoot mechanical, electrical, and hydraulic systems. Repair and replace key components (engines, brakes, transmissions, electrical systems, etc.). Keep accurate records of all work performed, inspections, and services. Ensure safety and environmental compliance in all tasks. Maintain a clean, organized shop and well-stocked tool area. Collaborate with other team members to meet deadlines and deliver top-quality work. Assist with upkeep of company facilities and grounds. Perform other duties as needed-flexibility is a plus! What We're Looking For: Valid California driver's license with a clean driving record. At least 5 years of experience in a similar role (or a solid mix of experience and education). Proven background in automotive, equipment repair, or restoration. Comfortable using diagnostic tools and working on both modern and older systems. Skilled in mechanical, electrical, and hydraulic diagnostics and repairs. Strong attention to detail and a commitment to quality craftsmanship. Great communication and teamwork skills. Able to work independently and manage multiple tasks effectively. Physical Requirements: Able to lift/move over 50 lbs. Comfortable with extended periods of standing, walking, kneeling, and other physical activity. Vision requirements include close, distance, color, peripheral, depth perception, and focus adjustment. Must be able to work in a shop environment with exposure to machinery, tools, and varying temperatures. Job Type: Full Time Salary Range: $23.00 to $34.00 (DOE) Schedule: Mon-Fri, 7am to 4 pm Work Location: In-person, Murrieta, CA Benefits: 401(k) matching, Dental insurance, Health insurance, Life insurance, Vision insurance, Supplemental, Paid Time Off, Sick Time Off, Paid Holidays This job description provides a general overview of the duties and responsibilities typically associated with the role. Specific duties and requirements may vary depending on the company and its unique operational needs.

Transdev in San Diego, CAis seeking an C-Level Mechanic to bolster our team. This role demands expertise in diagnosing, repairing, and maintaining alternative fuel engines across various vehicles and equipment. As a C-level Mechanic, you'll play a crucial role in ensuring safety, efficiency, and longevity for our vehicles. Transdev is proud to offer: Position Subject to Collective Bargaining Agreement: + $36.25/hr + Addition of $0.25/hr for each primary ASE certification obtained. Addition of $0.15/hr for each secondary ASE certification obtained. Benefits include: + Vacation:up to 14 days per year + Paid Sick Leave: 8 hrs monthly full-time employees/ 5 hrs monthly part-time employees; medical, dental & vision after 90 calendar days of employment for full-time employees, life insurance, 401k retirement benefits, and company holidays. + Company paid ASE testing, training materials, and tool reimbursement Benefits may vary depending on location policy. The above represents the standard Corporate Policy. Key Responsibilities: + Perform repairs and replacements on engines, ensuring optimal functionality. + Assist A-Level and B-Level Mechanics in advanced diagnostic and repair tasks, contributing to efficient workflow. + Execute routine maintenance tasks to prevent breakdowns and optimize diesel engine performance. + Lead diagnostic tests to accurately identify complex issues and determine comprehensive repair strategies for engines. + Perform advanced troubleshooting and repair tasks on engines, including overhauling and rebuilding components to required specifications. + Other duties as required. Qualifications: + 1+years of experience as a Mechanic. + Valid CDL license or willingness to obtain CDL license. + ASE certifications preferred; ASE certification program provided + Mechanic's Tool Set + Subject to a DOT drug testing and physical if applicable. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including cannabis, for any reason. Physical Requirements: + Must be able to work shifts or flexible work schedules as needed. + The employee is generally subjected to long periods spent sitting, typing, or looking at a computer screen. + Work environment will be a combination of both indoors and outdoors. About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thanks to safe, reliable, and innovative solutions that serve the common good. Find out more at******************** watch an overview video at******************* O5cv0G4mQ The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. California applicants:PleaseClick Herefor CA Employee Privacy Policy. Job Category: Mechanics/Technicians Job Type: Full Time Req ID: 6063 Pay Group: 2V9 Cost Center: 55826 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at ************************* or watch an overview video.

Job Description is for a Forklift Technicians, NOT forklift drivers Sign on Bonus - $1000 Join our dynamic team as a Forklift Technician Level 1 (Mobile) in San Marcos CA! If you have a passion for machinery and enjoy working in a hands-on environment, this is the perfect opportunity for you. As a key member of our maintenance team, you will be responsible for ensuring our fleet of forklifts operates smoothly and efficiently. We value teamwork, innovation, and a commitment to safety, and we're excited to find someone who shares these values. Responsibilities Perform routine maintenance and inspect various types of forklifts and material handling equipment. Experience in reporting mechanical issues Conduct safety inspections and ensure compliance with safety regulations. Maintain accurate records of maintenance and repair work performed. Provide excellent customer service while working on-site at customer locations. Collaborate with team members to improve processes and enhance service delivery. Stay updated on industry trends and advancements in forklift technology. Qualifications High school diploma or equivalent; technical certification in mechanics or related field preferred but not required Basic knowledge of forklift operation and maintenance. Strong problem-solving skills and attention to detail. Ability to work independently and manage time effectively. Valid driver's license and clean driving record. Excellent communication and interpersonal skills. Willingness to travel to various job sites as needed. *This position is for a Forklift Technicians, NOT for forklift drivers* About Us Namuann Hobbs is a purpose-driven company focused on innovation, quality, and impact. We operate at the intersection of creativity and strategy, with a collaborative team culture that values bold thinking, inclusivity, and continuous growth. At Namuann Hobbs, we're committed to delivering meaningful work while empowering our people to thrive. Benefits Sign on Bonus $1000 Health, Vision, and Dental Insurance - 401k Life and Disability Insurance Paid Time Off, Sick Leave, and Holidays Referral Bonus Program Monthly Performance Bonus Potential Overtime opportunities based on performance On-the-job training Work boot allowance, uniforms, and cleaning provided Company vehicle for mobile roles You should be proficient in: Mechanical Troubleshooting Skills Preventive Maintenance & Inspection Machine Safety Inspections Basic Computer Skills

Job Title: Maritime Mechanic Position Number: MM 001 Location: San Diego, CA Worksite: EOD ESU ONE Naval Amphibious Base, Coronado Status: Full-Time Clearance: Eligibility to obtain the appropriate level of security clearance if required for specific tasks or locations. Date Added: 8/5/2025 Hourly Rate: SCA OC- Heavy Equipment Mechanics [23430]- $33.57 and H&W- $4.93 Job Summary: The Maritime Mechanic shall have a minimum of three (3) years' experience as an Original Equipment Manufacturer (OEM) certified mechanic with commercial small outboard engines and ancillary equipment. The Government does not require OEM Certification of a specific manufacturer but it must be a certification relevant to the marine industry and aligned with the types of Craft operated by EODGRU ONE. • Desired experience includes troubleshooting and minor repairs of inboard marine diesel engines, as well as familiarity with waterjets. Duties and Responsibilities: Diagnose and troubleshoot equipment failures; repair and maintain diesel and gasoline engines on military SABAR equipment. Service and repair jet and propeller dive systems and gearing. Perform complex electrical troubleshooting and repair for ignition, lighting, panel controls, accessories, and DC output points. Perform preventative maintenance and/or corrective repair in accordance with the Navy Maintenance & Material Management (3M) Program, utilizing appropriate Personnel Qualification Standards and software as directed. Adjust and repair ignition, fuel, electrical, hydraulic, and steering systems. Shall perform shore-based operational/functional testing per Original Equipment Manufacturer (OEM) guidelines Maintain and repair chassis, frames, and bodies. Service and repair boat trailers Operate hoisting and jacking equipment, power tools, measuring instruments, gauges, and meters Lubricate equipment; maintain and repair tires, batteries, brakes, and valves. Perform shop management functions such as maintenance scheduling and spare parts inventory control. Responsible for the movement of watercraft, trailers, outboard engines, or any watercraft system component or palletized repair parts. Operate Government vehicles for the purpose of diagnosis and testing of equipment faults and completed repairs. Maintain generally accepted safety & cleanliness standards within designated workspaces and warehouse/storage spaces. Possible OCONUS/CONUS travel. Qualifications: Minimum of four years of experience as a certified Diesel Mechanic. Three years of experience as a certified Marine Outboard Engine Mechanic Capable of operating test equipment, electrical hand tools, and basic hand tools. Ability to lift objects up to 50 pounds multiple times a day during training exercises. Current CPR/First Aid/AED certifications. Current DoD Secret Clearance. EOE AA M/F/Vet/Disability

Join Our Growing Company! Where Service Is Everything! Field Service Technician, Full Time Pay Range: $33.00/HR to $40/HR DOE - $2,000 Sign On Bonus San Diego, California Are you a skilled technician with a passion for keeping things moving? Do you thrive in a fast-paced environment where your expertise makes a tangible difference? If so, we want you to join our dynamic team as a Forklift Technician! What You'll Do: Diagnose & Repair: Get hands-on with various forklift models, troubleshooting issues and performing repairs to ensure optimal performance. Routine Maintenance: Conduct regular inspections and preventive maintenance, ensuring our fleet runs smoothly and safely. Safety First: Adhere to all safety protocols, promoting a culture of safety within the workplace. Team Collaboration: Work closely with staff to coordinate repairs and minimize downtime. Documentation: Maintain accurate records of repairs, parts used, and maintenance schedules. What You Bring: Experience: Proven 5 years experience as a forklift technician or similar role; familiarity with electrical and hydraulic systems is a plus. Problem-Solving Skills: A knack for troubleshooting and a can-do attitude that tackles challenges head-on. Team Spirit: Excellent communication skills and a collaborative mindset. Customer Service: Be friendly, courteous and approachable Why Join Us? At Forklifts Group, we believe in investing in our team. Here's what you can expect: Competitive Salary: We offer a salary that reflects your skills and experience. Benefits Package: Comprehensive health benefits, retirement plan, 3 weeks paid time off and 10 paid holidays. Growth Opportunities: Ongoing training and professional development to help you advance in your career. Positive Environment: Join a supportive team that values your contributions and encourages innovation. Company Provided: We provide all the necessities for you to work in the field: vehicle, gas card, technology, uniforms and PPE. Work-Life Balance: Our schedules allow you to be home for dinner and you can enjoy your weekends too. Ready to elevate your career? Apply today and let's get moving! About us: Forklifts Group has been the West Coast's trusted material handling provider since 1989, with new and used forklifts, rentals, warehouse systems, training, parts, and service. Conveniently located in Fresno, CA, Sacramento, CA, Manteca, CA, Bakersfield, CA, Santa Maria, CA, Oakland, CA, and Las Vegas, NV., our team is dedicated to finding a solution for your equipment needs with the highest level of service. Forklifts Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

At SeaWorld, we're passionate about caring for animals. In fact, we've already rescued over 40,000 animals (and counting!). And we can save you from being stuck in just another job. Join us and help bring joy, excitement, and lasting memories to people from around the world. We're seeking enthusiastic, dedicated, and hard-working individuals to become our Ambassadors. Join us and play an important part on our incredible team! What you get to do: * Perform tasks related to the operation, repair and installation of the park's irrigation systems * Perform diverse horticultural, grounds keeping and greenhouse tasks including but not limited to watering, weeding, planting, transplanting, pruning, mulching, and mowing * Perform construction and installation tasks including but not limited to retention walls, pavement, irrigation, etc. * Assist with keeping records of daily work activities * Operate equipment (with training), including but not limited to mowers, augers, trimmers, shears, tillers, utility carts, water tanks, tractors, forklift, etc. * Responsible for truck and trailer operation * Perform tasks related to cold-weather protection as well as preparation for storms, including repair work for any weather damage or other damage * Perform cleaning tasks so as to maintain a safe, clean professional workplace and other miscellaneous duties as required What it takes to succeed: * High school diploma or equivalent * At least 6 months irrigation experience * Valid state driver's license and be able to obtain a company driver's license * Basic knowledge of cutting, assembling and gluing irrigation piping, sprinkler head operation and adjustment, and operation of irrigation controllers * Proficient in using a shovel for digging holes, trenches and working around other utilities * Excellent written and verbal communication skills * Ability to work in water up to chin deep with flotation device in order to maintain horticultural displays adjacent to waterways * Ability to stand for long periods of time * Ability to bend, kneel and climb repetitively * Ability to lift, push and pull 50 pounds Compensation: * 23.50 USD per hour The perks of the position: Ambassadors will enjoy a fun, fast-paced environment, and great teammates, as well as: * FREE park admission * Discounts on park admission tickets and passes for family and friends * Park discounts on food, merchandise, etc. * Scholarship opportunities * Exclusive employee events and giveaways EEO Employer: SEAWORLD PARKS & ENTERTAINMENT IS AN EQUAL OPPORTUNITY EMPLOYER. ALL APPLICANTS WILL BE CONSIDERED WITHOUT REGARD TO AGE, RACE, COLOR, RELIGION, SEX, NATIONAL ORIGIN, SEXUAL ORIENTATION, PREGNANCY, GENDER IDENTITY OR EXPRESSION, DISABILITY OR COVERED VETERAN STATUS.

Under the supervision of the Shop Supervisor and Management Team of Public Works, the auto gas/diesel mechanic will perform, a full range of skilled mechanical maintenance, diagnostic, inspection, and repair duties on Noli School Buses, Heavy Equipment, Tribal Administration's Company vehicles. DUTIES AND RESPONISBILITIES Although other duties may be assigned, the essential duties include the following: * Perform routine vehicle maintenance and preventive care for all Noli School Buses, Tribal company vehicles and heavy equipment in a timely matter. * Independently inspects and performs routine servicing of busses, light vehicles and heavy equipment, to include lubrication, oil changes, replacement of worn parts, valve adjustments, engine tune-ups, compression tests, emission control system tests and adjustments, and hydraulic & air brake adjustments and repairs. * Overhauls and repairs gas and diesel engines and transmissions to include the replacement of valves, pistons, piston rings, main bearings and crank shafts. * Performs diagnosis and troubleshooting of vehicles mechanic and electrical problems; and determines extent of repairs, and makes repairs as needed. Coordinates the repair of heavy equipment performed by outside garages. * Maintain proper maintenance logs to include detail report, date and mileage of each school bus which includes inspection, maintenance, lubrication, and all repairs performed for each vehicle under your control. * Orders parts and maintains vehicle parts inventory, fabricates and modifies brackets, braces and other vehicle parts and equipment: uses various welding equipment and cutting tools applying a variety of techniques to construct, repair or modify parts and equipment. * Safely operates lifts or hoists, computerized diagnostic scanners, electrical test equipment, and hand and power tools as required. Keeps tools, equipment and garage area neat. Corrects unsafe conditions in the work area and reports any conditions that are not correctable to supervisor immediately. * Perform work in adherence to safe work practice and procedures and in compliance with applicable standards and specifications, including to perform work in accordance with and maintain equipment as required by the California Highway Patrol and Vehicle Code: remain current on all laws pertaining to safe maintenance and repair of school buses. * Services, repairs and maintains small gasoline engines, pumps, and miscellaneous equipment and tools. * Obtain repair cost estimates * Performs field work on mobile and stationary generators. EDUCATION * High School Diploma or equivalent EXPERIENCE * 4 years' experience as a mechanic, including experience working with school buses, gas and diesel engines, and hydraulic & air brake systems * Good written and verbal skills, good problem-solving skills, good record keeping skills. Computer skills a plus. QUALIFICATIONS & REQUIREMENTS * Hydraulic/Air brakes Systems Certification * ASE Certification * Electrical Systems * A current California Class C Driver License and willing to obtain Class B * Must have clean DMV Record * All applicants are required to complete the pre-screen Background Clearance and Drug Testing * Must be at least 18 years of age Physical Demands * Auto mechanics usually work indoors, but may go out on service calls to make emergency repairs on vehicles that have broken down on the road. * Physical condition must allow long periods of standing or sitting and regular lifting, bending, stooping, kneeling, climbing, moving and pushing small to large articles.

Epsilon Systems Solutions, Inc. is seeking a full time Compressor Mechanic II in San Diego, CA. will provide support for recurring assessments and repair of Compressed Air Systems. Duties and Responsibilities: Provide troubleshooting, assessment, mechanical repairs and testing of U.S. Navy ship air compressors onboard ships and in the shop. Support personnel shall conduct removal, repairs, overhaul, installation, alignment, troubleshooting, modifying, and testing of ships' compressed air mechanical systems, equipment, and components to include: Works on low pressure air compressors (LPACs), medium pressure air compressors (MPACs), and high pressure air compressors (HPACs) Works on Emergency Breathing Air Compressors (EBACs), Self-Contained Breathing Air Compressors, and weapons systems high pressure air compressors Works on air flasks and air dehydrators Utilizes manifold gauges, vacuum pumps, recovery equipment, micro gauges, torque wrenches, micrometers, dial indicators and other precision measuring instruments, fixtures, various gauges, and portable machine and hand tools in the removal, repair, overhaul, assembly, installation and testing of equipment components and subassemblies. Performs air end swap-outs on Dresser Rand (DR), NAXI, and RIX LPACs including the STAR 200 series. Performs compressor alignments using Rotoalign laser alignment optics and reverse indicator methods. Rebuilds or replaces compressor service system valves. Cleans, inspects, and performs repairs/overhauls on mechanical components and system subassemblies. Disassembles, cleans, inspects and assesses parts and components to determine the extent of wear and damage in justification of recommendations to the Government for reuse or disposal. Identifies equipment and component materials and parts requirements. Protects machined and critical surfaces during removal. Installs foreign material exclusion (FME) coverings on all openings. Identify, tag and inspect piping systems, connections, foundations, fasteners and other parts for reinstallation or replacement. Follows guidelines and procedures set forth in FWPs. Reads, and understands system equipment technical manuals; drawings; and blueprints. Troubleshoots and repairs air compressor systems, equipment and components. Fabricates and brazes tubing, fittings, gauge lines, and cooler connections Operates vehicles in conjunction with job duties Required Qualifications: High School Diploma or equivalent Minimum 4 years' experience in compressed air systems maintenance and repair Possess a valid driver license Preferred Qualifications: Experience with both low, medium & high pressure compressed air systems Grade 3 and Grade 5 brazing qualifications Pay Range: The pay range for this role is $26.26 - $32.53 Hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience ADA Notations: Must be able to lift, carry and transport heavy equipment and boxes up to 50 lbs Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces Ability to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels Ability to wear a face mask while working May ride ships at sea for extended periods Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $56,000.00 - $62,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary Join HII as we keep the world's most powerful Navy afloat! We are seeking a Marine Mechanic technician for the Surface Enhance Capability Program (SECAP) who will assist ship's force personnel with conducting maintenance onboard U.S. Naval Vessels. This technician also conducts troubleshooting and repairs on HM&E systems, specifically hydraulics, valve and pump maintenance for installed systems: Main Drainage, Aqueous Film Forming Foam (AFFF), Counter Measure Washdown (CMWD), and Fire-main systems. Along with conducting maintenance of Auxiliaries equipment to include: HP and LP Air systems, Trash room equipment, Hydraulic equipment, and AC&R equipment. This is a full-time, hourly position located in San Diego, CA. What You Will Do Assess, Train, and assist in the repair of shipboard Auxiliaries equipment, hydraulics, pumps and valves on DC and engineering systems, AC&R equipment with shipboard personnel. Utilizes an "On Hands" approach/ technique specific to the Sailors individual strengths to benefit the Sailor as well as the command. Assisted Ships force in the identification of proper materials and manuals necessary to make repairs to shipboard systems. May provide direction and lead others. May manage one or more multiple job. Performs duties outside of specialty in order to complete installation or work assignment. What You Must Have High School education, or Trade School or equivalent, and 6 years of related experience. Must provide own hand tools as designated per trades specialty. Must have mechanical experience troubleshooting and repairing U.S. Navy Ships. Must be able to obtain and maintain DBIDS (Base Access) Must be able to obtain and maintain a DoD Security Clearance. Preferred: Bonus Points For Prefer technical/professional certifications. A current, valid DoD Security Clearance. Air Conditioning and Refrigeration EPA certification is a plus. Prior US Navy experience with Hydraulic experience is a plus. Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-###-#### for assistance. Press #3 for HII Mission Technologies.

Under the supervision of the Shop Supervisor and Management Team of Public Works, the auto gas/diesel mechanic will perform, a full range of skilled mechanical maintenance, diagnostic, inspection, and repair duties on Noli School Buses, Heavy Equipment, Tribal Administration's Company vehicles. DUTIES AND RESPONISBILITIES Although other duties may be assigned, the essential duties include the following: •Perform routine vehicle maintenance and preventive care for all Noli School Buses, Tribal company vehicles and heavy equipment in a timely matter. •Independently inspects and performs routine servicing of busses, light vehicles and heavy equipment, to include lubrication, oil changes, replacement of worn parts, valve adjustments, engine tune-ups, compression tests, emission control system tests and adjustments, and hydraulic & air brake adjustments and repairs. •Overhauls and repairs gas and diesel engines and transmissions to include the replacement of valves, pistons, piston rings, main bearings and crank shafts. •Performs diagnosis and troubleshooting of vehicles mechanic and electrical problems; and determines extent of repairs, and makes repairs as needed. Coordinates the repair of heavy equipment performed by outside garages. •Maintain proper maintenance logs to include detail report, date and mileage of each school bus which includes inspection, maintenance, lubrication, and all repairs performed for each vehicle under your control. •Orders parts and maintains vehicle parts inventory, fabricates and modifies brackets, braces and other vehicle parts and equipment: uses various welding equipment and cutting tools applying a variety of techniques to construct, repair or modify parts and equipment. •Safely operates lifts or hoists, computerized diagnostic scanners, electrical test equipment, and hand and power tools as required. Keeps tools, equipment and garage area neat. Corrects unsafe conditions in the work area and reports any conditions that are not correctable to supervisor immediately. • Perform work in adherence to safe work practice and procedures and in compliance with applicable standards and specifications, including to perform work in accordance with and maintain equipment as required by the California Highway Patrol and Vehicle Code: remain current on all laws pertaining to safe maintenance and repair of school buses. • Services, repairs and maintains small gasoline engines, pumps, and miscellaneous equipment and tools. • Obtain repair cost estimates • Performs field work on mobile and stationary generators. EDUCATION • High School Diploma or equivalent EXPERIENCE • 4 years' experience as a mechanic, including experience working with school buses, gas and diesel engines, and hydraulic & air brake systems • Good written and verbal skills, good problem-solving skills, good record keeping skills. Computer skills a plus. QUALIFICATIONS & REQUIREMENTS • Hydraulic/Air brakes Systems Certification • ASE Certification • Electrical Systems • A current California Class C Driver License and willing to obtain Class B • Must have clean DMV Record • All applicants are required to complete the pre-screen Background Clearance and Drug Testing • Must be at least 18 years of age Physical Demands • Auto mechanics usually work indoors, but may go out on service calls to make emergency repairs on vehicles that have broken down on the road. • Physical condition must allow long periods of standing or sitting and regular lifting, bending, stooping, kneeling, climbing, moving and pushing small to large articles.