Diesel mechanic jobs in Diamond Bar, CA - 916 jobs

The Kitchen Mechanic repairs, maintains, and installs a variety of commercial food preparation and serving equipment. This includes, but is not limited to: commercial ovens, ranges, fryers, warmers, proofers, mixers, dishwashers, coolers, freezers, ice machines, and soft-serve ice cream equipment. The Kitchen Mechanic also orders supplies and spar parts as necessary to properly maintain the equipment under his care. Salary Details: $32.22 / hr - $41.48 / hr based on overall experience Responsibilities: Troubleshoots, repairs and maintains a wide variety of commercial restaurant and food preparation equipment such as mixers, slicers, blenders, etc. Repairs and maintains commercial ice makers and ice dispensers. Repairs and maintains commercial dishwashing and ware washing equipment. Repairs and maintains gas and electric grills, ovens, stoves, and ranges. Repairs and maintains commercial soft-serve ice cream machines. Repairs and maintains commercial gas and electric fryers. Repairs and maintains commercial freezers, coolers, cold tables, and refrigerated display cases. Orders and maintains a stock of repair parts as required to facilitate timely repair of kitchen equipment. Maintains all assigned equipment in a safe and functional condition. Completes a variety of maintenance related paperwork, including daily logs, work orders, requisitions, and quotes. Provides technical specifications for the purchase of new and replacement commercial kitchen equipment. Communicates the status of all kitchen equipment and components in both verbal and written formats to Maintenance and Foods management. Reads and interprets equipment schematics for commercial kitchen and serving equipment. Other duties may be assigned. Qualifications: High School Diploma or GED required. At least 5 years' experience in the repair and maintenance of commercial kitchen equipment. At least 3 years' experience with the repair and maintenance of refrigeration equipment such as freezers, coolers, and ice making equipment. At least 2 years' experience with the repair and maintenance of gas or electric cooking equipment such as ranges, ovens, grills, or fryers. Basic electrical troubleshooting skills (including AC and DC motors and controls). Ability to work nights, weekends and holiday periods to meet business needs. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio and percent and to draw and interpret bar graphs. Ability to read, write, speak and understand English at a level sufficient to follow written policies and procedures; complete a variety of basic forms; and interact with guests including understanding and responding to specific questions.

Central Transport is one of the nation's most trusted and technologically advanced Less-Than-Truckload (LTL) carriers. With an ever-growing network of terminals nationwide, our team of dedicated professionals provide safe and efficient service to the United States, Canada, and Mexico. Our Growth is Creating Great Opportunities! Our team is expanding, and we want to hire the most talented people we can. Continued success depends on it! Once you've had a chance to explore our current open positions, apply to the ones you feel suit you best and keep track of both your progress in the selection process, and new postings that might interest you! Thanks for your interest in working on our team! Central Transport is an industry leading Less-Than-Truckload (LTL) transportation carrier. We are one of the nation's largest LTL carriers and have experienced significant growth over the last several years. As we continue to expand our network, we are seeking quality mechanics to help maintain our fleet of over 2,200 tractors, 8,500 trailers, and 1,700 forklifts across the United States and Canada. What Central Transport Offers: Entry Level Position - Are you looking to get your career started? Medical, Dental, Vision, and PTO Now Offering Blue Cross Blue Shield Blue Care Network! Free Uniforms Provided Potential to learn a skilled trade Responsibilities Include: Removing decals from trailers to be repaired Minor body work on trailers Physical Requirements: Work is considered heavy physical work requiring exertion of 100 pounds of force occasionally, up to 50 pounds of force frequently and up to 20 pounds of force consistently to move objects. Must possess strength, stamina and mobility to perform heavy physical work. Must be able to: walk, lift, reach, stoop, stand, grasp, balance, climb, kneel and crouch for extended periods of time Prior mechanic experience in the auto industry is a plus! If you're interested and would like to learn more, please call ************ ext. 2057 or submit your resume!

Pay Range: $25- $35 p/h, depending on experince Centuri companies consider several factors when extending an offer, including but not limited to, the role and responsibilities, a candidate's work experience, education, training and skills, and geographic location. Who We Are At NPL, part of The Centuri Organization, our employees are part of an established team working to support America's natural gas utility and energy infrastructure. Working at NPL means you are joining a company with over 50 years of experience, long-standing customer relationships, and one that is deeply integrated into our host communities. Come grow your career with us and be a part of something bigger. Mechanics perform maintenance service on construction vehicles and large equipment and machines. What You'll Do * Maintenance and repair of small engines, both gas and diesel * Perform preventative maintenance work, such as checking oil and fluid levels on all equipment * Maintain inventory records on repairs made, parts ordered, and part inventories * Coordinate work with operations and maintains communication for scheduling repairs and PMs * Provide after-hours support for critical timelines when needed * Diagnose and correct electrical problems * Use of pneumatic tools for construction equipment * Perform other tasks as requested by leadership What You'll Have * High School Diploma or equivalent * General knowledge of construction related equipment * Existing CDL or ability/willingness to obtain Class A CDL What You'll Get * Join the Largest Natural Gas Distribution Contractor in the United States * Weekly Payroll * Paid, on-the-job training for technical skills * Employee Assistance program benefit * Health Insurance Plan benefit * Retirement Plan benefit Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Flexibility to work various schedules and stay late when necessary with little or no notice * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card * Join and maintain Union membership Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Orange County Nearest Secondary Market: Los Angeles

Job Description Great Opportunity to Join a Stable Family Owned Company with a great work/life balance. Now Hiring an Auto Mechanic! If you are interested in a good job and good benefits, a GREAT environment, Team Work and a lot more, Then you may owe it to yourself to check us out!!! Only a one spot open!!! Must be an Energetic Team Player With Professionalism, Passionate About Helping People *** PTO, Medical, Vision and Dental Care Benefits If you're a Mechanic or a Mechanic's Apprentice looking for growth with a company that will help you perfect your craft and continue to invest in you, this is the opportunity for you. We are proud to offer a family-style work environment and above market pay, in addition to competitive benefits packages. This position is ideal for someone who is eager to immediately start working towards a Career. Benefits: Paid Time Off Health, Dental and Vision Care Daily job duties will include assisting and performing routine Mechanical service and repairs, installations and upgrades. You will be working with an Experienced Mechanic who will help provide ongoing training and education. Must work well individually and as part of a team. Follow the outline of the company policies and procedures. Communicate professionally and respectfully with customers, office staff and coworkers. Some experience servicing, repairing and basic oil changes, and other tasks as assigned. Ability to work Saturdays when needed by campus circumstances. Please click on ORIGINAL JOB POSTING to apply. Background and Drug Screening will be done before an offer is made.

Title: Journeyman Mechanic (Must be a Certified Welder) Function: Repair and Maintain FlexiVan Chassis equipment. Purpose/Summary: Under direct supervision of shop manager or foreman must be able to repair chassis independently to be in full compliance of FMCSA and FlexiVan standards. Key Responsibilities: o Mechanics are under the supervision of the General Manager, Assistant Manager and Shop Foreman. Able to perform all repairs required to return chassis to a roadable condition. o Review work order, inspect chassis and record all work to be performed. Review more involved repairs with Manager or Shop Forman before starting work. o Identify any repairs required that are not on the work order. Review repairs with Manager or Foreman prior to undertaking such work. o Understand and adhere to all shop safety rules and requirements. o Keep shop area clean and free of potential hazards. o Able to perform repairs within the time allowed. o Own and maintain small tools required to perform duties. o Physically able to perform heavy lifting Education and Experience o High School Diploma or GED o Required: Certified Welder, proficient in the various types of welding necessary to repair equipment including MIG and stick. o Preferred 3 years of Trailer mechanical experience. o Must own related tools. Technical Skills and Competencies Required: o Physically able to work on equipment including heavy lifting, bending and long periods of standing and walking. o Cutting: Able to use torch and plasma cutter. o Use of various specialized diagnostic equipment to diagnose, isolate and repair faults. o Proficient in the use of various air tools: impact guns, grinders, drills etc. o Proficient in the use of small hand tools. o Inspect, diagnose and repair/replace braking system components including brake shoes, hardware, seals, cam shafts, bushings, spider, slack adjusters and brake chambers. o Verify condition of axles and components including hubs, lubrication for contaminants, bearings, races, mounting hardware, rims, tires and spacers. o Inspect chassis frame, bolsters, pick up plates, king pin and cross members for cracks or deficiencies. Plan and perform any welding or metal fabrication work. o Inspect, diagnose and repair electrical system including 7 way plug, wiring harness, pig tails and bulbs. Travel Requirements: None Education Level: High School Primary Location: United States - FlexiVan Service Centers Organization: FlexiVan

Join Our Growing Company! Where Service Is Everything! Field Service Technician, Full Time Pay Range: $35.00/HR to $45/HR Pay structure reflects both prior industry experience and the strength of the candidate's existing book of business DOE - $2,000 Sign On Bonus Orange, California 92865 Are you a skilled technician with a passion for keeping things moving? Do you thrive in a fast-paced environment where your expertise makes a tangible difference? If so, we want you to join our dynamic team as a Forklift Technician! What You'll Do: Diagnose & Repair: Get hands-on with various forklift models, troubleshooting issues and performing repairs to ensure optimal performance. Routine Maintenance: Conduct regular inspections and preventive maintenance, ensuring our fleet runs smoothly and safely. Safety First: Adhere to all safety protocols, promoting a culture of safety within the workplace. Team Collaboration: Work closely with staff to coordinate repairs and minimize downtime. Documentation: Maintain accurate records of repairs, parts used, and maintenance schedules. What You Bring: Experience: Proven 5 years experience as a forklift technician or similar role; familiarity with electrical and hydraulic systems is a plus. Problem-Solving Skills: A knack for troubleshooting and a can-do attitude that tackles challenges head-on. Team Spirit: Excellent communication skills and a collaborative mindset. Customer Service: Be friendly, courteous and approachable Why Join Us? At Forklifts Group, we believe in investing in our team. Here's what you can expect: Competitive Salary: We offer a salary that reflects your skills and experience. Benefits Package: Comprehensive health benefits, retirement plan, 3 weeks paid time off and 10 paid holidays. Growth Opportunities: Ongoing training and professional development to help you advance in your career. Positive Environment: Join a supportive team that values your contributions and encourages innovation. Company Provided: We provide all the necessities for you to work in the field: vehicle, gas card, technology, uniforms and PPE. Work-Life Balance: Our schedules allow you to be home for dinner and you can enjoy your weekends too. Ready to elevate your career? Apply today and let's get moving! About us: Forklifts Group has been the West Coast's trusted material handling provider since 1989, with new and used forklifts, rentals, warehouse systems, training, parts, and service. Conveniently located in Fresno, CA, Sacramento, CA, Manteca, CA, Bakersfield, CA, Santa Maria, CA, Oakland, CA, and Las Vegas, NV., our team is dedicated to finding a solution for your equipment needs with the highest level of service. Forklifts Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Examine vehicles to determine extent of damage or malfunctions. Test drive vehicles, and test components and systems, using equipment such as infrared engine analyzers, compression gauges, and computerized diagnostic devices. Repair, reline, replace, and adjust brakes. Review work orders and discuss work with supervisors. Follow checklists to ensure all important parts are examined, including belts, hoses, steering systems, spark plugs, brake and fuel systems, wheel bearings, and other potentially troublesome areas. Plan work procedures, using charts, technical manuals, and experience. Test and adjust repaired systems to meet manufacturers' performance specifications.

Westrux International is seeking experienced Diesel Technicians to diagnose, repair and maintain Light, Medium and Heavy Duty Trucks. ASE Certification or Navistar Certification is preferred. 3+ years hands on experience as a diesel technician preferably dealership experience Cummins Engine Certification preferred ASE Certifications preferred Diagnostic skills/experience & attention to detail is an absolute requirement Extensive knowledge in the repair & maintenance of diesel engines and power trains Previous dealership experience preferred Strong verbal & documentation skills Strong character & work ethic Dependable, responsible Team Player with a positive attitude Own your own tools CDL Driver's License preferred Qualified applicant must be able to pass pre-employment drug screen and background check, possess a valid CDL and provide their own tools. Salary levels commensurate with experience. Immediate openings available at all locations for qualified applicants. Westrux International, Inc. is an Equal Opportunity Employer' Shop Type: Dealership This Job Is: A job for which military experienced candidates are encouraged to apply Vehicle Type: Heavy trucks Requirements Skills: Diesel engines Mechanic experience Brakes

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Go-Kart Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. NIght and weekend availability is required. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our go-karts and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 2 years of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Pay: $20.00 - $28.00 / hr. Shift: Evening shift Night shift Weekly day range: Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. The pay range for this position is $20.00 - $28.00 / hr. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

Mechanic Wage Range: $24.50-$32.00 per hour (wage based on experience and qualifications) Under general direction, performs miscellaneous skilled work in the maintenance, alteration, and repair of buildings and mechanical systems; may instruct, lead workers, and independent performance of a wide variety of skilled maintenance tasks. This is a temporary seasonal position not to exceed 122 days that will be scheduled full-time hours. Schedule: Monday-Thursday 7 am to 3:30 pm; Friday 6:00 am to 2:30 pm. Essential Functions: Inspects, maintains, and repairs plumbing, heating, water, and sewer systems. Does electrical maintenance and repair work; and repairs equipment. Does miscellaneous minor building construction and repair work. Does miscellaneous interior and exterior painting; and refinishes furniture. Keeps tools and equipment in good condition; keeps records and prepares reports. Repairs and maintains small and heavy equipment (forklifts electric carts, bobcat, skip loaders, water truck, dump truck, lawnmowers, blowers, hedgers, pressure washers, whackers, concrete saws, chain saws and light duty trucks). Troubleshoots engines, transmissions, hydraulic systems and electrical systems in the automotive and in the maintenance equipment. Maintains mechanic shop, inventory, and tools. Consults with staff when equipment is down, to utilize tag out lock out system. Organizes and directs the work of unskilled assistants. Makes rough sketches and estimates the cost of minor mechanical repairs. Estimates and requisitions materials and supplies Qualifications: Must be at least 18 years of age. Completion of a recognized apprenticeship in a mechanical trade. Four years of varied experience in the Mechanical Trades which must have included expedience working with at least 3 of the following areas: electrical, plumbing, heating, water and sewer systems, repairing various mechanical and automotive equipment : and performing minor building construction. Possess a valid California driver's license. Must be familiar with automotive safety rules and practices. Must be available to work all 23 days of the annual OC Fair Special Qualifications: Superior mechanical ability. Knowledge of methods, materials, and equipment used in the operation and repair of plumbing, heating, electrical, water, and sewer systems; materials, methods, and tools used in the repair of mechanical equipment and in miscellaneous building maintenance and repair work and skill in the performance of such work. Safety Orders of the Division of Industrial Safety dealing with heating, electrical, plumbing, and other mechanical systems. Ability to read, interpret, and work from specifications; estimate materials needed; follow oral and written directions. Gets along well with others; reads and writes at a level appropriate to the classification. Completion of a recognized apprenticeship in a mechanical trade or three years of varied experience as a Building Maintenance Worker (including experience working in electrical, plumbing, heating, water and power systems; and repairing various mechanical and automotive equipment. Possess a valid California driver's license Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, talk and hear. The employee is occasionally required to walk; use hands and fingers to operate, handle, or feel objects, tools, or controls; and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and the ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderately quiet, however louder noise levels may be experienced during outdoor events and when in larger event buildings. The duties listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Will be required to perform other duties as directed, requested or assigned.

: Vehicle/Equipment Preventative Maintenance: * Perform routine and preventative maintenance, including tune-ups, filter changes, and lubrication on all 2-stroke engine equipment, such as blowers, trimmers, and chainsaws. * Diagnose and troubleshoot mechanical failures in 2-stroke engines and their components, including carburetors, ignition systems, fuel lines, and exhaust. Vehicle/Equipment Repair: * Repairs and maintains heavy grounds, construction, and road maintenance equipment, as well as specialty machinery, including gasoline, diesel, and alternative fuel-powered vehicles (such as compressed natural gas), tractors, sweepers, skip loaders, tractor implements, manlifts, hoists, trenchers, concrete mixers, compressors, generators, pumps, riding mowers, and more. Responsibilities include: Removing, repairing, overhauling, and installing components like engines, brake systems, clutches, transmissions, differential assemblies, hydraulic systems, water pumps (both low and high pressure), valves, piping systems, tanks, fuel injection systems, and other common accessories on construction and maintenance equipment. * Installing pistons, rings, and pins. * Adjusting bearings, cleaning carburetors, and fine-tuning the air/fuel mixture or carburetor calibration for optimal engine performance. * Tuning engines and repairing ignition systems. * Repairing track rollers, carriers, and idlers. * Replacing broken parts such as gas lines, brake lines, hoist cables, steering gears, drive shafts, and other critical components. * May also repair or install electrical parts, including lights, wiring systems, and other accessories. * Utilizing a data terminal or personal computer to input and retrieve maintenance data. * Assembling trailers and mounting special equipment like air compressors, water pumps, or hoists. * Modifying equipment to meet specific requirements. * Perform tire and track maintenance and repairs on equipment like riding mowers and smaller construction machinery to ensure optimal functionality and safety. * Performing road tests on machinery to ensure functionality. * Operating tools and machines such as electric drills, grinders, valve facers, drill presses, hydraulic presses, hoists, motor analyzers, dynamometers, and various gauges. * Ensuring that safety features, such as lights, warning systems, or blade guards, are functional on landscape equipment. Repair Shop Maintenance: * Maintains a safe, clean, and organized work environment. * Cares for and maintains shop tools and equipment in line with industry standards for automobile, equipment, and heave machinery maintenance and repair. Responsibilities include, but are not limited to, the upkeep and repair of shop tools, general housekeeping of assigned areas, and the inspection and documentation of building equipment and systems. Administration: * Maintain accurate and detailed records of all repair work, preventative maintenance schedules, and parts used in repairs. * Regularly and promptly input material and labor hours spent, along with technician notes, into the TMA system for work order execution. * Provide material lists and/or estimated labor hours required for specific tasks or assignments. * Attend training classes related to the positions and for professional development to expand mechanical knowledge and skillsets. QUALIFICATIONS: * Knowledge: Work requires thorough knowledge of automotive and/or equipment mechanics including electrical systems and brake and engine overhaul; thorough knowledge of methods, tools, materials, equipment and computerized systems used in the maintenance, adjustment and repair of engines, equipment and accessories; working knowledge of wiring and electrical theory and engine principles; working knowledge of hydraulic systems; and working knowledge of applicable state and federal regulations pertaining to automotive and other power-driven equipment, including applicable smog regulations. * Abilities: Must be able to make skilled repairs to applicable automotive, maintenance and/or construction equipment; diagnose mechanical and electrical malfunctions; perform a variety of skilled repairs on equipment; work from blueprints, drawings and sketches to fabricate parts; perform required welding; inspect vehicles and equipment and determine extent of repairs; estimate cost, time and materials of mechanical work and repairs; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; analyze and respond appropriately to emergency situations; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. * These abilities normally would be acquired through any combination of progressively responsible training and experience as an automotive and/or equipment mechanic which demonstrates achievement of journey-level skills equivalent to that acquired through completion of a standard apprenticeship program. PREFERRED QUALIFICATIONS: * ASE Certified Small equipment repair experience i.e., gas powered landscape equipment Out of State Work The California State University (CSU) system is a network of twenty-three public universities providing access to a quality education through the support of California taxpayers. Part of CSU's mission is to prepare educated, responsible individuals to contribute to California's schools, economy, culture, and future. As an agency of the State of California, the CSU's business operations almost exclusively reside within California. The CSU Out-of-State Employment Policy prohibits hiring employees to perform CSU-related work outside California. For more information, go to the California State University Out-of-State Employment Policy. Background Check Cal Poly Pomona will make a conditional offer of employment to final job candidates, pending the satisfactory completion of a background check (including a criminal records check). The conditional offer of employment may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. In determining the suitability of the candidate for the position, Cal Poly Pomona will give an individualized assessment to any information that the applicant submits for consideration regarding the criminal conviction history such as the nature, gravity and recency of the conviction, the candidate's conduct, performance or rehabilitation efforts since the conviction and the nature of the job applied for. For more information, go to the California State University Background Check Policy. CSU Classification Salary Range This position is part of the Teamsters bargaining unit 6. The CSU Classification Standards for this position are located on the CSU Classification Standards website. The CSU Salary Schedule is located on the CSU Salary Schedule website. The classification salary range for this position according to the respective skill level is: minimum $5,355 and maximum $7,801 per month. Please refer to the anticipated hiring range for the appropriate salary rate for this particular position. Employment Eligibility Verification Cal Poly Pomona hires only individuals lawfully authorized to work in the United States. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. For more information, go the I-9 Acceptable Documents website. University Driving Requirement Positions that require driving for university business by using a personal or state vehicle must comply with the Authorized University Driver Policy. Driving records are monitored and evaluated by the Risk Management Department. The Risk Management Department evaluates a good driving report based on the following criteria. The driver must: 1. Have a valid California or other State Driver's license. 2. Have no more than 3 motor vehicle violations or been the cause of 3 accidents in a 12-month period (or any combination of 3 thereof) 3. Not have more than 3 DMV Points, if their license is Class C or, 4. Not have more than 5 DMV Points, if their license is Class A, B, or C with endorsements. For more information, go to the Authorized University Driver Policy. Child Abuse/Neglect Reporting Act (CANRA) The person holding this position is considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Read more at the California Child Abuse and Neglect Reporting Act policy. Security & Fire Safety In compliance with state and federal crime awareness and campus security legislation, including the Jeanne Clery Campus Safety Act, California Education Code section 67380, and the Higher Education Opportunity Act (HEOA), Cal Poly Pomona's Annual Security Report and Annual Fire Safety Report are available for viewing at Cal Poly Pomona's Annual Security Report and Cal Poly Pomona's Annual Fire Safety Report. Pay Transparency Nondiscrimination As a federal contractor, Cal Poly Pomona will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. For more information, see the Pay Transparency Nondiscrimination Provision poster. Reasonable Accommodation We provide reasonable accommodations to applicants and employees with disabilities. Applicants with questions about access or requiring a reasonable accommodation for any part of the application or hiring process should contact the ADA Coordinator by email at **********************. For more information, go to Employment Notices. Equal Employment Opportunity Consistent with California law and federal civil rights laws, Cal Poly Pomona provides equal opportunity in employment without unlawful discrimination or preferential treatment based on race, sex, color, ethnicity, or national origin. Our commitment to equal opportunity means ensuring that every employee has access to the resources and support they need to thrive and succeed in a university environment and in their communities. Cal Poly Pomona complies with Title VI of the Civil Rights Act of 1964, Title IX of the Education Amendments of 1972, the Americans with Disabilities Act (ADA), Section 504 of the Rehabilitation Act, the California Equity in Higher Education Act, California's Proposition 209 (Art. I, Section 31 of the California Constitution), other applicable state and federal anti-discrimination laws, and CSU's Nondiscrimination Policy. We prohibit discriminatory preferential treatment, segregation based on race or any other protected status, and all forms of discrimination, harassment, and retaliation in all university programs, policies, and practices. Other Notices For other important employment notices, we invite you to visit Cal Poly Pomona's Employment Notices web page. Advertised: Jan 05 2026 Pacific Standard Time Applications close: Jan 19 2026 Pacific Standard Time

Job DescriptionBenefits: 401(k) Company car Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Benefits/Perks Careers Advancement Opportunities Medical Paid Vacation Access to 401K Competitive Compensation Great Working Environment Job Summary We are looking for a Qualified Experienced ForkliftTechnician to join our successful service center. As a Forklift Technician, you will be responsible for diagnosing and repairing Forklifts. You must be comfortable using the dealerships computer software and have extensive knowledge of Forklift systems. If you have a never give up attitude and are willing to problem-solve until you find the best solution for the customer, we want to hear from you. Responsibilities Use your expertise and diagnostic tools to evaluate vehicle malfunction Assist with establishing service center procedures for tracking repair status, maintaining technical documentation, and other necessary protocols Carry out routine vehicle maintenance tasks such as fuel system replacement, oil changes, and brake pad replacements, Hydraulic cylinder repair, tune ups, diagnose break downs, Hydraulic hose replacement. Conduct in-depth vehicle inspections of all systems, including engine, transmission, brakes and cooling Ensure a high level of customer satisfaction and repeat business Convey necessary vehicle repair information to customers in a clear and concise manner Qualifications High school diploma or GED is required 3 Years prior forklift mechanical experience Extensive tool supply Clean DMV record Willingness to work with others as a team Strong customer service and communications skills are required Commercial Truck repair experience a plus

Job Description Qualifications: Advanced students of an Applied Technologies HVAC program. EPA Refrigerant License or ability to obtain within 1 year of being hired. Clean Driving Record. Ideally, you'll also have: Associate of Arts/Science degree achieved or achieving in HVAC/R technologies. 1 to 3 years of related HVAC experience in campus related areas of industrial or commercial HVAC work. EPA 608 Universal Certification. Show up at your scheduled shift and ready to work. Responsibilities: This position involves HVAC facility operation, maintenance, diagnosis and repair of a commercial facilities Air, Water and Building Automation Systems. The campus is primarily served by a Central Plant for campus Cooling and Heating requirements. Experience with these systems is advantageous. The candidate should have competent electrical, refrigeration, plumbing, brazing, diagnostic, and mechanical abilities. The candidate will adhere to site standards for safety, quality, housekeeping and security. They will be under direct supervision, utilizing standard HVAC testing equipment and tools. They will record pertinent information for equipment and systems maintenance logs. They will demonstrate the ability to identify the need for diagnosis and repair of all related equipment. They are expected to implement accepted trade practices consistent with HVAC industry standards. They will participate in operations, inspection and repair of equipment and systems. They are expected to perform all duties in accordance with company and site safety standards. Comments/Special Instructions: This position is subject to a trimester rotation of a 24/7/365 shift schedule.

Do you love hands-on work, and working as part of a team? At ISCO, we provide an opportunity to really make a difference. With a high value of appreciation and respect, ISCO strongly focuses on our team members growth and development. ISCO is a family-owned and operated end-to-end piping solutions provider that specializes in HDPE, working with leading edge technology that makes us a market leader. We are looking for great people with a strong work ethic who love to work with their hands. Pay Range: $25-$30/hour (Depending on Experience) Alongside competitive pay, ISCO offers a benefits package including; medical/dental/vision, paid vacation, holidays, sick days, and a 401k! Team members are provided all tools/equipment and PPE. Responsibilities: Our Mechanics are responsible for repairing and refurbishing fusion equipment in a distribution plant by performing the following duties: * Diagnose, maintain and repair fusion equipment including; small diesel/gas engines, generators, electrical circuits and hydraulic systems * Perform quality inspections of rental fusion equipment prior to returning to service * Maintain records of service, repairs and scheduled maintenance of rental fusion equipment * Inspect and diagnose customer owned equipment to prepare repair quotes * Communicate with maintenance coordinator and service advisors on status of down equipment and customer repairs * Report machine defects, damages and malfunctions * Repair and Service fabrication shop equipment as needed * Prepare equipment for shipping * Previous experience with computers for order entry, parts ordering and email is a plus * Ability to utilize local vendors and/or vendor websites to locate required parts as needed * Perform other related duties as assigned Base Qualifications: * 3+ years of experience in maintenance or automotive repair preferred * Diagnostic ability and Troubleshooting skills * Commitment to quality * Ability to meet deadlines, work flexible hours, and work in a team environment * Interpret technical instructions * Capability to use independent judgment and work both independently and, in a team setting. * Basic computer skills * Physical demands: must be able to lift up to 50lbs on a regular basis, standing, climbing is frequently required. Screening requirements include: A Physical, Drug Screen, and Criminal Background Check.

Job Description Late Shift Mechanic - Full Time - Santa Fe Springs, CA At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable. Join our Pump Services team within Rotating Equipment Services division in Santa Fe Springs, CA as a Late Shift Mechanic to help us take our Service Center to the next level. In this role you will be accountable for: Assembling all types of pump equipment to customer, OEM and industry standard specifications Disassembling equipment to gain access remove, clean and inspect components Inspecting & recording component measurements using instruments, tools and gages and providing inspection report Investigating and determining root cause failure Determining proper materials for repairs as per BOM Contouring impellers and pump casings to meet hydraulic requirements Setting and operating dynamic balancing equipment Performing final testing and inspections To succeed in this role, you will need: Analytical and interpersonal skills Attention to detail Extensive knowledge of and ability to use hand tools, precision measuring and testing equipment and machine shop equipment Minimum five (5) years of pump repair experience Ability to work with limited supervision Ability to travel to and work at customer sites Ability to work overtime If you're a qualified candidate with proven expertise in developing core competencies, leading teams and driving continuous improvement, take the next step and apply with Sulzer. Make the most of your career! Your benefits: 15 days of paid time off and 11 company-paid holiday 401k plan with a 6% match Comprehensive health plan including medical, dental, vision, Life, short-term & long-term disability Motivating wellness program Employee Assistance Program Location: We are based in Santa Fe Springs, CA. We are looking forward to hearing from you! Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce. 82% of our employees recommend Sulzer as a good place to work - so come and join our story, starting today!

Under the supervision of the Shop Supervisor and Management Team of Public Works, the auto gas/diesel mechanic will perform, a full range of skilled mechanical maintenance, diagnostic, inspection, and repair duties on Noli School Buses, Heavy Equipment, Tribal Administration's Company vehicles. DUTIES AND RESPONISBILITIES Although other duties may be assigned, the essential duties include the following: * Perform routine vehicle maintenance and preventive care for all Noli School Buses, Tribal company vehicles and heavy equipment in a timely matter. * Independently inspects and performs routine servicing of busses, light vehicles and heavy equipment, to include lubrication, oil changes, replacement of worn parts, valve adjustments, engine tune-ups, compression tests, emission control system tests and adjustments, and hydraulic & air brake adjustments and repairs. * Overhauls and repairs gas and diesel engines and transmissions to include the replacement of valves, pistons, piston rings, main bearings and crank shafts. * Performs diagnosis and troubleshooting of vehicles mechanic and electrical problems; and determines extent of repairs, and makes repairs as needed. Coordinates the repair of heavy equipment performed by outside garages. * Maintain proper maintenance logs to include detail report, date and mileage of each school bus which includes inspection, maintenance, lubrication, and all repairs performed for each vehicle under your control. * Orders parts and maintains vehicle parts inventory, fabricates and modifies brackets, braces and other vehicle parts and equipment: uses various welding equipment and cutting tools applying a variety of techniques to construct, repair or modify parts and equipment. * Safely operates lifts or hoists, computerized diagnostic scanners, electrical test equipment, and hand and power tools as required. Keeps tools, equipment and garage area neat. Corrects unsafe conditions in the work area and reports any conditions that are not correctable to supervisor immediately. * Perform work in adherence to safe work practice and procedures and in compliance with applicable standards and specifications, including to perform work in accordance with and maintain equipment as required by the California Highway Patrol and Vehicle Code: remain current on all laws pertaining to safe maintenance and repair of school buses. * Services, repairs and maintains small gasoline engines, pumps, and miscellaneous equipment and tools. * Obtain repair cost estimates * Performs field work on mobile and stationary generators. EDUCATION * High School Diploma or equivalent EXPERIENCE * 4 years' experience as a mechanic, including experience working with school buses, gas and diesel engines, and hydraulic & air brake systems * Good written and verbal skills, good problem-solving skills, good record keeping skills. Computer skills a plus. QUALIFICATIONS & REQUIREMENTS * Hydraulic/Air brakes Systems Certification * ASE Certification * Electrical Systems * A current California Class C Driver License and willing to obtain Class B * Must have clean DMV Record * All applicants are required to complete the pre-screen Background Clearance and Drug Testing * Must be at least 18 years of age Physical Demands * Auto mechanics usually work indoors, but may go out on service calls to make emergency repairs on vehicles that have broken down on the road. * Physical condition must allow long periods of standing or sitting and regular lifting, bending, stooping, kneeling, climbing, moving and pushing small to large articles.

The Ride Maintenance Mechanics perform inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions. Areas of responsibility include (but are not limited to) maintenance of: gearboxes, chains, sprockets, hydraulic systems, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job. Hourly Pay Rate: Level 1: $26 / hr Level 2: $33.50 / hr Level 3: $41 / hr **The hourly pay rate offered is based on job-related experience, knowledge and skills. Responsibilities: Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned; taking corrective actions as issues are identified. Inspections are visual as well as auditory. Performs scheduled and unscheduled preventative maintenance, inspects, repairs and tests amusement rides and related equipment. This may include repair or replacement of major components such as hydraulic cylinders, gears, chains, sprockets, pneumatic cylinders, hoses, brakes, clutches, wheels, bearings, gearboxes, springs, or a wide variety of other mechanical devices. Trouble shoots a variety of mechanical, pneumatic, hydraulic and electrical systems and takes appropriate corrective actions. Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed, and submits required paperwork to supervision in a timely manner. Communicates the status of assigned rides both verbally and in written format. Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices. Works safely and efficiently on all assigned tasks, coordinates with other as necessary to achieve desired results. Performs a variety of other tasks depending on experience including welding (Mig, Tig and Arc) and fabrication; sets up and operates lathe, mill, drill press, grinder and other metal working equipment. Reads, understands and applies information from manufacturer's manuals for service, repair and or component replacement. Accurately reads blue prints (mechanical, pneumatic, and hydraulic). Provides guest service according to Six Flags standards when serving the guest or working with subordinates, including initiating guest interactions, answering questions and giving directions. Meets scheduling availability requirements, including nights, weekends, and holiday periods to meet business needs. Other duties may be assigned. Qualifications: Education High School Diploma or GED Experience 2 to 6 years of verifiable experience in mechanical maintenance, preferably in an industrial or amusement setting. Qualifications: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio and percent and to draw and interpret and understand bar graph Ability to speak and understand English at a level sufficient to comprehend basic instructions from supervisors; conduct basic interactions with other employees; and answer simple questions Regularly uses moderately complex oral and written skills. May train others in functional area and interact with others across the company and/or externally. May make presentations to department or middle management. In-depth knowledge of concepts, practices and procedures with ability to use in varied situations. Decisions may affect a work unit or area with a department. May contribute to business and operational decisions that affect the department.

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. Night and weekend availbility is required. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 1 year of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. The pay range for this position is $20 - $22 / hr. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

Under the supervision of the Shop Supervisor and Management Team of Public Works, the auto gas/diesel mechanic will perform, a full range of skilled mechanical maintenance, diagnostic, inspection, and repair duties on Noli School Buses, Heavy Equipment, Tribal Administration's Company vehicles. DUTIES AND RESPONISBILITIES Although other duties may be assigned, the essential duties include the following: •Perform routine vehicle maintenance and preventive care for all Noli School Buses, Tribal company vehicles and heavy equipment in a timely matter. •Independently inspects and performs routine servicing of busses, light vehicles and heavy equipment, to include lubrication, oil changes, replacement of worn parts, valve adjustments, engine tune-ups, compression tests, emission control system tests and adjustments, and hydraulic & air brake adjustments and repairs. •Overhauls and repairs gas and diesel engines and transmissions to include the replacement of valves, pistons, piston rings, main bearings and crank shafts. •Performs diagnosis and troubleshooting of vehicles mechanic and electrical problems; and determines extent of repairs, and makes repairs as needed. Coordinates the repair of heavy equipment performed by outside garages. •Maintain proper maintenance logs to include detail report, date and mileage of each school bus which includes inspection, maintenance, lubrication, and all repairs performed for each vehicle under your control. •Orders parts and maintains vehicle parts inventory, fabricates and modifies brackets, braces and other vehicle parts and equipment: uses various welding equipment and cutting tools applying a variety of techniques to construct, repair or modify parts and equipment. •Safely operates lifts or hoists, computerized diagnostic scanners, electrical test equipment, and hand and power tools as required. Keeps tools, equipment and garage area neat. Corrects unsafe conditions in the work area and reports any conditions that are not correctable to supervisor immediately. • Perform work in adherence to safe work practice and procedures and in compliance with applicable standards and specifications, including to perform work in accordance with and maintain equipment as required by the California Highway Patrol and Vehicle Code: remain current on all laws pertaining to safe maintenance and repair of school buses. • Services, repairs and maintains small gasoline engines, pumps, and miscellaneous equipment and tools. • Obtain repair cost estimates • Performs field work on mobile and stationary generators. EDUCATION • High School Diploma or equivalent EXPERIENCE • 4 years' experience as a mechanic, including experience working with school buses, gas and diesel engines, and hydraulic & air brake systems • Good written and verbal skills, good problem-solving skills, good record keeping skills. Computer skills a plus. QUALIFICATIONS & REQUIREMENTS • Hydraulic/Air brakes Systems Certification • ASE Certification • Electrical Systems • A current California Class C Driver License and willing to obtain Class B • Must have clean DMV Record • All applicants are required to complete the pre-screen Background Clearance and Drug Testing • Must be at least 18 years of age Physical Demands • Auto mechanics usually work indoors, but may go out on service calls to make emergency repairs on vehicles that have broken down on the road. • Physical condition must allow long periods of standing or sitting and regular lifting, bending, stooping, kneeling, climbing, moving and pushing small to large articles.