Diesel Mechanic Jobs in Greer, SC

Job posted until filled. Entry salary is $53,362.59 GENERAL DESCRIPTION: The purpose of the class is to operate and repair complex mining machinery and/or equipment that require extended training and experience. Perform routine inspections and preventive maintenance on all quarry equipment and tools, repair defects and report corrective action to the management staff. ESSENTIAL JOB DUTIES: 1. Operate mining equipment to include the crushing plant and rolling stock. 2. Inspect equipment to ensure safe, proper working conditions, repair and report corrected defects and routine maintenance performed to supervisor. 3. Perform routine maintenance, repairs and cleaning of crushing plant and other equipment. 4. Use welding and cutting torches as needed for fabrication. 5. Review and suggest modifications to work methods to increase efficiency. 6. Perform all duties in accordance with applicable policies, procedures, laws, regulations and standards of quality and safety. 7. Assist co-workers with various duties as required. 8. Assist in coordinating maintenance duties with management. 9. Use hand and power tools in various manual tasks as needed. 10. Perform routine maintenance and cleaning of assigned tools and equipment. 11. Respond to after hour emergencies as required. Essential Job Duties are intended to be examples of duties and are not intended to be all inclusive. There will be other duties as assigned. Additional duties include: As needed Requirements: KNOWLEDGE, SKILLS, AND ABILITIES: Knowledge of and ability to operate heavy equipment; Knowledge and experience with maintenance of heavy equipment; Knowledge of the organization's operations, services and policies; Ability to communicate orally and in writing; Good welding and use of cutting torch skills; Good motor skills; EDUCATION AND EXPERIENCE: The educational requirement for this position is: Completion of high school/GED. Education may not be substituted for experience. Related-experience required: 4 years Experience may not be substituted for education. LICENSES, CERTIFICATIONS, OR REGISTRATIONS: Certifications, licenses, professional designations, or other qualifications required for this position include: MSHA Miner Training, Valid State Driver's License Certifications, licenses, professional designations, or other qualifications preferred for this position include: CDL with HAZMAT and Tanker certification to operate quarry fuel truck. ESSENTIAL PHYSICAL REQUIREMENTS: Physical Requirements: The physical activities required for this position involve: Standing: up to 2/3 of the time; walking: up to 2/3 of the time; sitting: over 2/3 of the time; using hands: up to 2/3 of the time; reaching with hands and arms: up to 2/3 of the time; climbing or balancing: up to 2/3 of the time; stooping, kneeling, crouching, or crawling: up to 2/3 of the time; talking or hearing: up to 2/3 of the time; and tasting or smelling: up to 2/3 of the time. This position requires lifting: Up to 10 pounds: over 2/3 of the time; up to 25 pounds: over 2/3 of the time; up to 50 pounds: up to 2/3 of the time; up to 100 pounds: under 1/3 of the time; and, more than 100 pounds: under 1/3 of the time. Vision Requirements: This position has the following special vision requirements: Close vision (clear vision at 20 inches or less) Distance vision (clear vision at 20 feet or more) Color vision (ability to identify and distinguish colors Peripheral vision (ability to observe an area that can be seen up or down and to the left and right when vision is fixed on a given point) Depth perception (three-dimensional vision, ability to judge distances and spatial relationships) Ability to adjust focus (ability to adjust the eye to bring an object into sharp focus) ENVIRONMENTAL WORKING CONDITIONS: The following physical conditions and hazards may be encountered while working in this position: Indoor environment Outdoor environment Noise Odors Extreme temperatures Vibration Moisture and/or humidity Dust Fumes Gases Electrical hazards Mechanical hazards Chemical hazards Explosive hazards Burn hazards Moving mechanical parts Working in high places Oconee County is an equal opportunity/affirmative action employer committed to achieving excellence and strength through diversity. The County seeks a wide range of applicants for its positions so that one of our core values, a qualified and diverse workforce, will be affirmed. PI79d952c1c04a-26***********2

IMMEDIATELY HIRING! A&P MECHANIC - ROTOR WING FULL-TIME Opportunity in South Carolina $62,705 to $91,455 (starting pay) Depending on experience *$10000 sign-on AND $2080 annual stipend available with IA!!* We are hiring for A&P Base Mechanics to support the daily maintenance of the helicopters across our region. You will perform scheduled and unscheduled aircraft maintenance, inspections, repairs, and modifications to airframes, rotors and appliances. Our Aircraft Maintenance team maintains our helicopters to the highest standards possible. This is a base position, relocation within an hour required. ESSENTIAL FUNCTIONS/DUTIES Provide on-site maintenance support for our fleet of Bell 407 series helicopters Maintain the aircraft Schedule aircraft maintenance Manage base inventory Maintain the base library and company owned ground support equipment Perform other duties as assigned MINIMUM QUALIFICATIONS Three years of turbine helicopter maintenance experience with A minimum of six months helicopter maintenance experience during that last 24 months Bell 407 maintenance experience preferred High School diploma or GED equivalent Valid FAA Airframe & Powerplant (A&P) License required Inspection Authorization Certification preferred Valid State issued Driver's License Additional FAA/FCC ratings preferred Must be able to successfully complete FAA - DOT drug and alcohol testing program Must be able to push and/or pull 100+ lbs. Must be able to lift and/or carry up to 50 lbs. Intermediate-level computer skills with an inventory system IFR helicopter avionics and auto-pilot experience preferred Manufacturer training or equivalent on Bell 407 preferred Prior civilian HEMS experience preferred Travel between bases to support aircraft maintenance needs is required GUIDING VALUES AND BEHAVIORS Employee must consistently exhibit our guiding principles: • Patient Care - We continually earn the privilege to care for our patients. It is at the forefront of everything we do. • One Team - We respect each other and achieve together what no individual can alone. • Innovation - We are driven to develop solutions that inspire progress. • Vigilance - We will never waver in our commitment to safety and preparedness in the fulfillment of our duties. • Ownership - We are accountable for what we do and take pride in how we do it. • Citizenship - We are dedicated to being good stewards in the communities we serve. Why Choose Med-Trans: As a national leader in air ambulance, Med-Trans is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. #GMR_AIR If your passion is helicopters and you're ready to work in an environment where every second counts, apply today! EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Check out our careers site benefits page to learn more about our benefit options, which include medical, vision, dental, 401k, disability, FSA, HAS, EAP, vacation and paid time off.

233 Sardis Rd, Asheville, NC 28806 What’s the Job? Ready to accelerate your career while helping our customers move forward? As a Technician at Penske, you’ll do exactly that. Here, you’ll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. Whether you’re looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you. Why is this job awesome? For starters, no day is the same. You’ll get to work on lots of different types of equipment—not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Working alongside experienced supervisors and master technicians, we’ll teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are getting the industry certified training you need to succeed and grow your career. You’ll learn from the best in the industry. We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles • Partnering with your manager to learn new skills using Penske’s technician training and hands-on coaching • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums - 2nd Shift ($2), 3rd Shift ($3), Weekends ($2) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred) • Valid driver’s license • The ability to solve problems and comfort using tools • Excellent customer service skills and communication skills • The ability to work well as part of a team and outside • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Penske is an Equal Opportunity Employer Keywords: Automotive, Diesel, Diesel Repair, Diesel Tech, Diesel Mechanic, Gas Mechanic, Mechanic, Hydraulics Auto Repair, Truck Repair, Trailer Repair, Equipment Installer, Electronic Diagnostic, Car Carrier Repair, Mechanical Repair, Installer, Truck Equipment, Auto Mechanic, ASE Certified, ASE, Automotive, Repair, Light And Heavy Duty Trucks, Truck Mechanic Service Technician, Heavy Truck & Equipment Technician, Heavy Truck Mechanic, Equipment Mechanic, Shop Mechanic, Truck Mechanic, Fleet Mechanic, Fleet Technician, Trailer Mechanic, Universal Technical Institute, UTI, Wyotech, Lincoln College of Technology, Lincoln Tech, University of Northwest Ohio, Detroit Diesel, Cummins, Eaton, Meritor, Mack, International, Peterbilt, Kenworth, Volvo, Freightliner, Hino, Isuzu, Apprentice PJ300 Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 233 Sardis Rd. Primary Location: US-NC-Asheville Employer: Penske Truck Leasing Co., L.P. Req ID: 2411781

WE are growing our Service team and looking for all levels of DIESEL SERVICE TECHNICIANS to repair/service Medium and Heavy-Duty trucks of any make or model. Whether you're a Master Mechanic or just graduating from Tech School, WE can find a spot for you on our team. WE seek team members with in-depth knowledge of medium- and heavy-duty trucks and/or the desire to learn. WE pay all OEM-specific continued education for full-time Technicians. Must be focused -- Gets the job done right for our customers, getting them back on the road while earning bonuses for efficiency and productivity. WE pay performance incentives to our Diesel Techs, and WE want our Techs to make a great living working here. Must work safely -- WE care about our Diesel Techs and want them to return home in the same condition as they came to work, with a safety committee at each location. Benefits and perks include: Medical/Dental/Vision/Life insurances Sign on Bonus * Tech Tool Allowance Paid Uniforms * Safety Shoe Reimbursement Paid Time Off * Paid OEM Training 401(K) w/match * Tech Referral Bonus

About Us: ACME Precision Diesel is a locally owned company specializing in medium and heavy-duty truck repair with a full-time opportunity to service our direct customers based in Greer, SC. We are currently looking for a Diesel Mechanic who can bring the hard-working attitude and professionalism our customers value! Come join us today! Job Description: In this role, an individual will diagnose, repair, and replace parts on all heavy truck and diesel-powered vehicles. This is a full-time, flat rate position. We are looking to fill this position immediately. This job has excellent income potential for an experienced mechanic. Average Pay: $30 - $35 (flat rate scale) Schedule: Monday to Friday (8am-5pm) Benefits: Great Benefits (Medical, Dental, Vision) after 60-day onboarding period Voluntary Short-Term 401k with match Paid time off Paid EVERY week Career stability Opportunity for growth Job Requirements: Proficiency in the use of diesel engine diagnostic software Repair and replace defective parts, components, or systems Perform basic or routine preventative maintenance (PM's) on tractors and trailers 2+ Years of Diesel Mechanic experience preferred Sound problem-solving skills Works unsupervised on most tasks Must be able to lift 50-75lbs. Experience with Cummins & Detroit engines Must have minimum tool requirement Must pass pre-employment screenings Valid driver's license Visit us at *********************

Mechanic A Forklift, Earn up to $32.38 hr Full-Time, Monday - Friday, 1st shift Earn 1 week of vacation after 90 days of employment Come and experience the difference with R+L Carriers R+L Carriers has an immediate opportunity for Forklift Mechanics at our Piedmont, SC Service Center. Preferred Candidates will have the ability to lift up to 125lbs, work in a fast-paced environment as well as rebuild, repair, and maintain forklifts, pallet jacks, and hydraulic lifts. Other duties as required by management. Requirements / Qualifications: * Must have a clean driving record for the past 5 years. * 3 years of experience with the repair/maintenance of industrial fork trucks. * Electric & manual pallet jack repair/maintenance experience. * Aerial lift repair/maintenance experience would be a plus. * Must be able to use a computer for several different task including creating repair work orders. * Must have your own tools on site. The company will provide specialized tools. * Must be able to lift 100 lbs. * Work in a fast-paced environment and be self-motivated. Click here **************************** Click here ****************************

Qualifications * High school diploma or GED preferred * Experience working in the field of mechanics * Team player * Valid driver's license, CDL is preferred * Drug-free * Dependable transportation * Self-motivated * Has their own preferred tools Job Description * Work with other team members in order to complete tasks * Reports to foreman and superintendent * Wear all necessary PPE's as required and/or needed * May be asked to use a shovel * May be able to lift more than 50 lbs. * Willing to work in the climate * Travel to and from work and jobsites as needed * Responsible for maintaining jobsites in a clean and accessible demeanor * Willing to be trained * Make necessary evaluation and repairs to broken equipment * Complete Equipment Service * Change cutting edges and teeth * Keep the shop and truck clean Benefits * Starting Pay depends on work experience. * 90 day performance review * Completion of 90 days, eligible for Health, Dental, Vision and Life Insurance. * After 1 year, eligible for 401k plan at open enrollment. * Workdays: M-F 7 am until 5:30 pm, Optional weekend work depending on job * EEO Employer * Pay period is weekly

Linder Industrial Machinery Company is recognized as one of the nation's premier heavy equipment dealers providing quality new, used and rental equipment across 27 branch locations in Florida, Georgia, Virginia, South Carolina, and North Carolina. Linder's commitment to delivering superior industrial machinery solutions is shared by our leading equipment partners such as Komatsu, BOMAG, Deutz Fahr, Atlas, Konecranes, Mantsinen, Superior Brooms, Terramac, and many more.

$3,000 Sign-on Bonus (Bonus based on performance and eligibility) Frito-Lay Fleet Technicians are essential to our team because they work on our fleet vehicles and keep our drivers safe. Are you looking for a job at a company that rewards the mechanically gifted? Although you will start out working for Frito-Lay, this job can open the door to career opportunities with our parent company, PepsiCo. We are proud to offer you a generous starting salary which ramps up quickly for top performers. We also offer unbeatable benefits including health insurance, dental and vision, retirement savings benefits including 401(k) with company contribution, vacation days and much more. You may already be familiar with what this position entails. You will help us maintain and repair our vehicles, diagnose mechanical issues, manage parts inventory, and charge parts and labor to work orders. We asked our Fleet Technicians what else we should let you know about working here, and this is what the team had to say about frequent tasks you can expect to perform: * You will use your extensive knowledge to assist entry-level mechanics with difficult repairs. * You will build relationships with vendors when getting estimates for parts or labor. * You will interact with a variety of Frito-Lay drivers, from professional truck drivers to salespeople. * This is a physical job which often involves working in tight spaces under vehicles. This is an experienced position. Here are our minimum requirements for you to consider prior to filling out our application: * You are at least 21 years of age or older * You may be required to work on weekends, holidays as well as off shift * You can 50 lift pounds or more with or without a reasonable accommodation * You are able to climb, bend, reach, stoop, kneel, and stretch for extended periods with or without a reasonable accommodation * You have the ability to work in tight spaces for extended periods with or without a reasonable accommodation * You will be required to work on/under trucks for an entire shift (8 to 12 hours) with or without a reasonable accommodation Given the fact that we offer high wages and phenomenal benefits, you might be wondering what will give you an edge when you apply to Frito-Lay. Here is an idea of the characteristics our managers look for: * Safety-Focused: Drivers are counting on your focus on safety which means doing the job correctly and not taking shortcuts. * Flexibility: Like all Frito-Lay team members, your work on weekends and holidays helps us maintain our industry dominance. We place a high premium on teamwork. * Attention to Detail: We want to avoid breakdowns and stranded drivers. Your approach to preventative maintenance should be diligent, even meticulous, when it comes to maintaining our fleet. * Initiative: You are out in the field by yourself much of the time. Our best people would put it this way: we need folks who can show up and work until the job is done. * Leadership: You will manage situations that might involve providing instructions to coworkers in the spirit of safety, efficiency, and cooperation. Frito-Lay leaders will trust you to make good decisions. * Tech Savvy: Technology will enable you to quickly diagnose mechanical problems, and you will also draw upon your computer skills when installing electronic logging devices such as tablets and dashboard computers. * Teamwork: It's important that you work well with others because you will regularly interact with our Regional Drivers, vendors and other team members. Does this sound like you? We hope that you are now envisioning yourself as the newest addition to our diverse team. There is nothing sweeter than a thankful driver who is back out on the road delivering quality snacks to our customers as a direct result of your personal expertise and work ethic. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available [1] EEO is the Law & [2] EEO is the Law Supplement documents. View [3] PepsiCo EEO Policy. Please view our [4] Pay Transparency Statement. References Visible links 1. ************************************************************************************* 2. ****************************************************************************************************** 3. ******************************************************************************************** 4. *********************************************************************************************************

Summary: The Garbage Truck Mechanic is responsible for adhering to our level of commitment to safety and customer service. In this role, the successful candidate will perform repairs and maintenance work on waste pick-up trucks and support equipment in accordance with factory and industry standards, run diagnostics on trucks and work closely with other team members to meet company goals. Essential Duties and Responsibilities * Determines vehicle condition by conducting inspections and diagnostic tests; identifying worn and damaged parts. * Perform minor and major repairs on waste pick- up trucks and support equipment. * Keeps equipment available for use by completing preventive maintenance schedules; installing component and part upgrades; controlling corrosion; completing winterization procedures. * Conduct regular preventative maintenance on service trucks, including inspection, tire rotation and oil changes. * Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; making adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units. * Verifies vehicle performance by conducting test drives; adjusting controls and systems. * Complies with federal and state vehicle requirements by testing engine, safety, and combustion control standards. * Maintains vehicle appearance by cleaning, washing, and painting. * Maintains accurate vehicle records by annotating services and repairs. * Collaborate with repair team to diagnose problems with vehicles and plan repairs. * Keeps shop equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs. * Contains costs by using warranty; evaluating service and parts options. * Keeps supplies ready by inventorying stock; placing orders; verifying receipt. * Updates job knowledge by participating in educational opportunities; reading technical and regulation publications. * Enhances maintenance department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. * Follow and comply with all safety policies. * Additional duties as assigned. Qualifications QUALIFICATIONS To perform the job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/ and or Experience: * 2+ years' experience as a Diesel Mechanic * Ability to lift up to 100 pounds * Excellent reading and writing skills * ASE Diesel Certification an asset Specialized Knowledge Required - Including any required certificates, licenses, and registrations * ASE Diesel Certification preferred * Must be able to multi-task and have an attention to detail. * Must have the ability to work effectively in a fast-paced environment. * Great attention to detail. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Light lifting (50-100 pounds), Shop Environment WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Warehouse/ Shop Environment In addition to the above, the performance of other related duties may be required. I have read and understand the contents of the above job description.

1621 SC-14, Greer, SC 29650 What's the Job? Ready to accelerate your career while helping our customers move forward? As a Technician at Penske, you'll do exactly that. Here, you'll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. Whether you're looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you. Why is this job awesome? For starters, no day is the same. You'll get to work on lots of different types of equipment-not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Working alongside experienced supervisors and master technicians, we'll teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are getting the industry certified training you need to succeed and grow your career. You'll learn from the best in the industry. We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Using Penske's tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Doing preventative maintenance repairs-like replacing or rotating tires-and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles • Partnering with your manager to learn new skills using Penske's technician training and hands-on coaching • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums - 2nd Shift ($2), 3rd Shift ($3), Weekends ($2) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske's Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications Qualifications:• High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred• Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred)• Valid driver's license • The ability to solve problems and comfort using tools• Excellent customer service skills and communication skills• The ability to work well as part of a team and outside• Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management• The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice.• Regular, predictable, full attendance is an essential function of the job• As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review.• Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.• While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms.• The associate must be able to safely work in all weather conditions.• Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment.• The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Penske is an Equal Opportunity Employer Keywords: Automotive, Diesel, Diesel Repair, Diesel Tech, Diesel Mechanic, Gas Mechanic, Mechanic, Hydraulics Auto Repair, Truck Repair, Trailer Repair, Equipment Installer, Electronic Diagnostic, Car Carrier Repair, Mechanical Repair, Installer, Truck Equipment, Auto Mechanic, ASE Certified, ASE, Automotive, Repair, Light And Heavy Duty Trucks, Truck Mechanic Service Technician, Heavy Truck & Equipment Technician, Heavy Truck Mechanic, Equipment Mechanic, Shop Mechanic, Truck Mechanic, Fleet Mechanic, Fleet Technician, Trailer Mechanic, Universal Technical Institute, UTI, Wyotech, Lincoln College of Technology, Lincoln Tech, University of Northwest Ohio, Detroit Diesel, Cummins, Eaton, Meritor, Mack, International, Peterbilt, Kenworth, Volvo, Freightliner, Hino, Isuzu, Apprentice

1621 SC-14, Greer, SC 29650 What's the Job? Ready to accelerate your career while helping our customers move forward? As a Technician at Penske, you'll do exactly that. Here, you'll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. Whether you're looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you. Why is this job awesome? For starters, no day is the same. You'll get to work on lots of different types of equipment-not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Working alongside experienced supervisors and master technicians, we'll teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are getting the industry certified training you need to succeed and grow your career. You'll learn from the best in the industry. We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Using Penske's tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Doing preventative maintenance repairs-like replacing or rotating tires-and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles • Partnering with your manager to learn new skills using Penske's technician training and hands-on coaching • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums - 2nd Shift ($2), 3rd Shift ($3), Weekends ($2) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske's Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications:• High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred• Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred)• Valid driver's license • The ability to solve problems and comfort using tools• Excellent customer service skills and communication skills• The ability to work well as part of a team and outside• Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management• The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice.• Regular, predictable, full attendance is an essential function of the job• As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review.• Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.• While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms.• The associate must be able to safely work in all weather conditions.• Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment.• The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Penske is an Equal Opportunity Employer Keywords: Automotive, Diesel, Diesel Repair, Diesel Tech, Diesel Mechanic, Gas Mechanic, Mechanic, Hydraulics Auto Repair, Truck Repair, Trailer Repair, Equipment Installer, Electronic Diagnostic, Car Carrier Repair, Mechanical Repair, Installer, Truck Equipment, Auto Mechanic, ASE Certified, ASE, Automotive, Repair, Light And Heavy Duty Trucks, Truck Mechanic Service Technician, Heavy Truck & Equipment Technician, Heavy Truck Mechanic, Equipment Mechanic, Shop Mechanic, Truck Mechanic, Fleet Mechanic, Fleet Technician, Trailer Mechanic, Universal Technical Institute, UTI, Wyotech, Lincoln College of Technology, Lincoln Tech, University of Northwest Ohio, Detroit Diesel, Cummins, Eaton, Meritor, Mack, International, Peterbilt, Kenworth, Volvo, Freightliner, Hino, Isuzu, Apprentice

At Atlantic Forklift Services, we prioritize the well-being and success of our employees. We foster a collaborative and inclusive work environment where every team member is valued and respected. Our leadership team is committed to providing the support and resources needed for personal and professional growth. We believe in open communication, teamwork, and celebrating our successes together. Are you a talented Forklift Technician seeking a rewarding career with excellent benefits and a supportive company culture? Look no further! Our team at Atlantic Forklift Services is looking for a dedicated individual to join us in our Greer, SC location and contribute to our mission of excellence in forklift services. Join us at Atlantic Forklift Services and discover a rewarding career opportunity where you can thrive both personally and professionally. We can't wait to welcome you to our team! Company Benefits: - Competitive salary commensurate with experience - Daily overtime - Comprehensive health insurance coverage, including medical, dental, vision, disability, and retirement with company match* - Paid time off and holidays for work-life balance, including employee birthday* - Opportunities for ongoing training and professional development Our Forklift Technicians are responsible for: - Performing routine maintenance and repairs on various types of forklifts - Diagnosing and troubleshooting mechanical issues with precision and efficiency - Conducting thorough inspections to ensure equipment safety and compliance - Collaborating closely with team members to deliver exceptional service to our customers - Maintaining detailed records of maintenance activities and service history Position Requirements: - Previous experience as a forklift technician or in a similar role - Strong mechanical aptitude and problem-solving skills - Ability to work independently and as part of a team - Excellent communication and customer service skills - Forklift certification preferred but not required - Clean driving record and a valid drivers license required If you're ready to take your career to the next level and become part of a company that values its employees, we want to hear from you! Atlantic Forklift Services is an equal opportunity employer and is committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. *company benefits are subject to required waiting periods

Job Title Diesel Service Journeyman / Mechanic Business Function Service Branch Name MHC Kenworth-Asheville Date 02-04-2025 Address 1895 Old Haywood Road City Asheville State NC Job Overview & Essential Functions Murphy-Hoffman Company, LLC is North America's largest Kenworth truck dealership group and leasing group. As MHC continues to grow, we have an opening for a Diesel Service Journeyman / Mechanic. The role of the Diesel Service Journeyman / Mechanic performs all functions of a fully qualified heavy-duty truck repair Technician under minimal supervision. * Performs skilled and complicated mechanical work on heavy-duty truck equipment and related components with minimum supervision. * Performs trouble shooting on major problems. * Works with and helps train Apprentice Technicians. * Maintains a neat and orderly working area, and proper handling of company tools. * Advises the Service Foreman if additional repair work is necessary. * Maintains favorable relations with customers. * Participates in training to stay abreast of new technology. * Performs other duties as assigned by a supervisor. SAFETY-SENSITIVE This position has been designated as a safety-sensitive position. Any person performing the position while under the influence of marijuana or any other illegal drug may constitute a threat to health or safety or in which a lapse of attention could result in injury, illness, or death, including without limitation a position that includes the operating, repairing, maintaining, or monitoring of heavy equipment, machinery, aircraft, motorized watercraft, or motor vehicles or handling of hazardous materials and/or waste as part of the job duties. Qualifications * CDL * A/C, Brake and DOT Annual Inspector Certifications * Must have at a minimum, one specialization (i.e., engine, drive train). * Minimum of 4 years' experience or vocational * Necessary tools to perform position. * Must have good customer relations and communication. Benefits * Competitive Salary * Medical, Dental and Prescription Insurance * Disability and Life Insurance * Paid Time Off program * 401k and Profit Sharing with Employer Match * Flexible Spending Account * Internal Promotion Opportunities * On the Job Training About Us MHC is an expansion of the original company, Ozark Kenworth, Inc. Ozark Kenworth started in Springfield, Missouri, in January 1975. Opening for business without a Parts or Service department and only three employees in a temporary facility. From there, the company grew and expanded. MHC is now a multi-state network of full-service diesel truck dealerships, leasing and rental operations, transport refrigeration locations, and a finance company which offers a complete array of finance and insurance services. We believe in fostering an environment that helps employees realize their full potential - a place where you can grow as a person and a professional. Equal Opportunity Employer / Veterans / Disabled

Do you love hands-on work, and working as part of a team? At ISCO, we provide an opportunity to really make a difference. With a high value of appreciation and respect, ISCO strongly focuses on our team members growth and development. ISCO is a family-owned and operated end-to-end piping solutions provider that specializes in HDPE, working with leading edge technology that makes us a market leader. We are looking for great people with a strong work ethic who love to work with their hands. Alongside competitive pay, ISCO offers a benefits package including; medical/dental/vision, paid vacation, holidays, sick days, and a 401k! Team members are provided all tools/equipment and PPE. Responsibilities: Our Mechanics are responsible for repairing and refurbishing fusion equipment in a distribution plant by performing the following duties: * Diagnose, maintain and repair fusion equipment including; small diesel/gas engines, generators, electrical circuits and hydraulic systems * Perform quality inspections of rental fusion equipment prior to returning to service * Maintain records of service, repairs and scheduled maintenance of rental fusion equipment * Inspect and diagnose customer owned equipment to prepare repair quotes * Communicate with maintenance coordinator and service advisors on status of down equipment and customer repairs * Report machine defects, damages and malfunctions * Repair and Service fabrication shop equipment as needed * Prepare equipment for shipping * Previous experience with computers for order entry, parts ordering and email is a plus * Ability to utilize local vendors and/or vendor websites to locate required parts as needed * Perform other related duties as assigned Base Qualifications: * 3+ years of experience in maintenance or automotive repair preferred * Diagnostic ability and Troubleshooting skills * Commitment to quality * Ability to meet deadlines, work flexible hours, and work in a team environment * Interpret technical instructions * Capability to use independent judgment and work both independently and, in a team setting. * Basic computer skills * Physical demands: must be able to lift up to 50lbs on a regular basis, standing, climbing is frequently required. Screening requirements include: A Physical, Drug Screen, and Criminal Background Check.

F-16 Depot Mechanic (F18,F22, F35) Duration: 6+ Month Contract Pay Range: $32-38 On-Site work only Open to US Citizens & US Persons Required Experience: F-16, Flight Line Maintenance Preferred Experience: Aircraft Towing, Aircraft Launch & Recovery Will consider experience with: F-18, F-22, F-35 Aircraft experience THE COMPANY - Work with one of the Largest American Owned Aerospace & Defense Companies. -Mechanic will perform/assist with all launch, recovery, preflight/thru flight/Basic Post Flight inspections, ground handling, maintenance, engine runs, operational checkouts, and servicing. -Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical and Pnuedralic systems and components on the aircraft. -Responsible for the acceptableness of all electrical, hydraulic-pneumatic, propulsion, landing gear, flight control surfaces and periodic inspections, general airframe condition, aircraft furnishings and crew escape system of the aircraft. -Will be required to remove panels and associated hardware to obtain access equipment requiring repair. Job Qualifications: + Must have minimum of 4 years F-16 or other legacy fighter heavy maintenance experience + Must be able to work first or second shift + Must be extremely versed in F-16, Fighter type mechanic experience Crew Chiefs, Plane Captains, etc people that have done maintenance on fighters or other heavy related maintenance. + Military Fighter aircraft experience (F-16 a MUST) + No tools Required US Citizen or US Person Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law. Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity and inclusion for the benefit of our employees, our customers, and the communities where we are located. Employment decisions are made without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.

WE are growing our Service team and looking for all levels of DIESEL SERVICE TECHNICIANS to repair/service Medium and Heavy-Duty trucks of any make or model. Whether you're a Master Mechanic or just graduating from Tech School, WE can find a spot for you on our team. WE seek team members with in-depth knowledge of medium- and heavy-duty trucks and/or the desire to learn. WE pay all OEM-specific continued education for full-time Technicians. Must be focused -- Gets the job done right for our customers, getting them back on the road while earning bonuses for efficiency and productivity. WE pay performance incentives to our Diesel Techs, and WE want our Techs to make a great living working here. Must work safely -- WE care about our Diesel Techs and want them to return home in the same condition as they came to work, with a safety committee at each location. Benefits and perks include: Medical/Dental/Vision/Life insurances Sign on Bonus * Tech Tool Allowance Paid Uniforms * Safety Shoe Reimbursement Paid Time Off * Paid OEM Training 401(K) w/match * Tech Referral Bonus

Mechanic A Forklift, Earn up to $32.38 hr Full-Time, Monday - Friday, 1st shift Earn 1 week of vacation after 90 days of employment Come and experience the difference with R+L Carriers R+L Carriers has an immediate opportunity for Forklift Mechanics at our Piedmont, SC Service Center. Preferred Candidates will have the ability to lift up to 125lbs, work in a fast-paced environment as well as rebuild, repair, and maintain forklifts, pallet jacks, and hydraulic lifts. Other duties as required by management. Requirements / Qualifications: Must have a clean driving record for the past 5 years. 3 years of experience with the repair/maintenance of industrial fork trucks. Electric & manual pallet jack repair/maintenance experience. Aerial lift repair/maintenance experience would be a plus. Must be able to use a computer for several different task including creating repair work orders. Must have your own tools on site. The company will provide specialized tools. Must be able to lift 100 lbs. Work in a fast-paced environment and be self-motivated. Click here **************************** Click here ****************************

F-16 Depot Mechanic- Mechanic will perform/assist with all launch, recovery, preflight/thru flight/Basic Post Flight inspections, ground handling, maintenance, engine runs, operational checkouts, and servicing. Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical and Pnuedralic systems and components on the aircraft. Responsible for the acceptableness of all electrical, hydraulic-pneumatic, propulsion, landing gear, flight control surfaces and periodic inspections, general airframe condition, aircraft furnishings and crew escape system of the aircraft. Will be required to remove panels and associated hardware to obtain access equipment requiring repair. Job Requirements: + Must have minimum of 4 years F-16 or other legacy fighter heavy maintenance experience + Must be able to work first or second shift + Must be extremely versed in F-16, Fighter type mechanic experience Crew Chiefs, Plane Captains, etc people that have done maintenance on fighters or other heavy related maintenance. + Military Fighter aircraft experience (F-16 a MUST) + Must be US Citizen + Hydraulics/Structures experience Benefits provided: + 401K + Medical, dental, and vision + Sick time as applicable to state law Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity and inclusion for the benefit of our employees, our customers, and the communities where we are located. Employment decisions are made without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.