Diesel mechanic jobs in Rockville, MD - 2,043 jobs

Do you have a passion for repairing cars, assisting with providing exceptional guest experiences, and being an innovator in the automotive industry? As a Service Technician, you will have the opportunity to make a positive impact on our business and customers every day while earning the pay you deserve and awesome benefits! We are looking for smart, energetic, technically-focused Technicians who will help us redefine the car-servicing experience. Does this sound like you? Apply now! The "B" Level Service Technician has the responsibility of understanding and completing routine repairs necessary for the repair of customer vehicles. This individual will perform general repairs and diagnosis with some assistance. These repairs include but are not limited to light engine work, transmissions, clutches, drive shafts, electrical systems (starters and alternators) HVAC systems, steering & suspension systems. This individual will have a majority of their manufacture certifications. Make accurate use of the multi-point inspection form on each vehicle Document all work performed and recommended on assigned repair order Communicate with service advisor when additional work is needed or if repairs cannot be completed within the promised time Maintain technician proficiency as specified by Asbury standards Conduct road test to determine work needed and to confirm work was successfully completed when necessary and practical Perform all levels of diagnosis and repair on vehicles Perform all levels of preventive/routine maintenance services Utilize product and technical training as assigned by the manufacturer and management Participate in manufacturer-sponsored training programs and schools to continuously expand your knowledge of new technology Maintain manufacturer (CSI) Customer Satisfaction Index at or above the Asbury specified goal(s) in service for district, regional and national scores Complete the work, notations and time-keeping necessary to the successful completion of warranty repair orders and the filing of warranty claims Report to management any situation or condition that would jeopardize the safety, welfare, or integrity of the dealership, its customers or employees Take care to ensure that customer's vehicles are returned to them as clean as they were prior to being serviced Understand and complete required training for compliance with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Comply with all federal, state and local laws, as well as company policy, regarding safeguarding all customer vehicles, property and information ASE certifications heavily preferred Manufacturer certifications heavily preferred Previous automotive technician experience required Must have basic tools Must have great technical and mechanical skills Must be a team player and have the ability to work repetitively on complex tasks Must be a minimum of eighteen years of age Must have a valid driver's license Must be able to pass pre-employment screening (background & drug test) Company Benefits: Pay and Recognition: Weekly pay Paid holidays & paid time off Deferred Holiday Pay Match Paid training Stock Awards(select management and front-line team member's eligible Insurance / Retirement: Insurance: medical, vision, dental, accident, critical illness and hospital indemnity plans Up to 12 weeks paid pregnancy leave (disability leave) Paid Parental Leave Health savings Flex spending accounts (tax free) Short-term and Long-term disability plans Life Insurance (Whole Life and Term) 401k with company match Learning, Tuition Assistance and Career Development: * Digital career path tool to assist with career development * Continuous training through Asbury's Internal Learning Management System Professional growth and development opportunities Additional advantages: Student loan relief resources Employee assistance program Employee discounts on parts and service repairs Scholarship awards Opportunities to join our community service initiatives, which includes paid volunteer hours Aggressive Employee referral program with bonus opportunities INDKOONS

The Master Technician requires experience and technical expertise to diagnose drivability, air conditioning and electrical systems. It is expected to use leadership and mentoring skills to drive a team to increase customer care and satisfaction A suc Technician, Technical, Mechanical, Social Services, Repair

Bridgestone Retail Operations (BSRO) is part of Bridgestone Americas and employs over 22,000 teammates in North America. BSRO operates more than 2,200 company-owned stores, including Firestone Complete Auto Care, Tires Plus and Wheel Works locations. With locations across North America and more than $3 billion in tire and auto service sales, Bridgestone Retail Operations is the right place to build a career. Whatever role you fill, when you represent the Bridgestone name, you are a valued teammate, and part of our larger mission to "Serve Society with Superior Quality." We start by offering each teammate more than just competitive pay. We provide formal training, performance incentives, paid vacation and holidays, competitive healthcare packages for full-time and part-time employees, and a 401k plan to help build towards your future. We believe people can only provide superior service and quality to others when they are allowed to bring their whole self to work and know they are supported. We believe in championing all perspectives, individuals and teams because we understand the importance of seeing the world and our business through many different lenses. We are building a team as diverse as the world we serve. So, show us what you're made of. Show us the smart stuff, the tough stuff, the bold, beautiful and brave stuff. Because who you are is what we need. **Job Category** Retail **Position Summary** The Automotive Technician plays a pivotal role within our automotive service team. As a vital member, you learn and develop foundational skills in diagnosing, repairing, and maintaining vehicles. Under the guidance of experienced technicians, this role involves hands-on learning to address various automotive systems and services. Automotive Technicians participate in routine inspections, contribute to vehicle assessments, and assist in repair procedures. Additionally, Automotive Technicians may interact with customers to explain repair procedures, answer inquiries, and provide exceptional service. Overall, this role demands a combination of mechanical aptitude, attention to detail, and a commitment to delivering high-quality workmanship in a fast-paced environment. This role offers a unique opportunity for individuals to build a solid foundation in automotive repair while contributing to the overall success of our team. This position will offer a sign on bonus for new employees of $2,000-$3,000. Pay Range: $19.55 - $29.33 **Responsibilities** + Change oil and perform other scheduled maintenance services. + Perform inspections of steering, suspension, and brake systems. + Install batteries and check electrical systems. + Perform tire maintenance. + Install parts. + Road test vehicles. + Obtain or maintain A.S.E. certifications in at least one of A1 - A8 within first two years of employment (Tests and registrations fees are paid for by company pass or fail. Technicians receive bonus for each test passed) **Minimum Qualifications** + Ability to learn basic mechanical tasks. + Must have a valid automobile driver's license at all times and be able to drive customer and company vehicles. + Basic understanding of general automotive maintenance & tire repair services including: + Oil changes + Basic inspections + Repairing tires + Reading, writing, and math skills. **Preferred Qualifications** + 2 years of automotive repair experience, completion of Vocational-Technical School program in a related field or demonstrated skills via third party certificates/assessment. + A.S.E certification or equivalent external qualifications or training certifications. **OUR CREW KNOWS** **BENEFITS** + Medical, Dental and Vision - Starting day 1 for all our teammates + Paid vacation and holidays + On-the-job training and company-funded ASE certifications + Flexible work schedule + 401(k) match + On demand pay (daily pay) program available **OUR VALUES GIVE BACK TO** **YOU** + Professional Development: No matter where you're at in your career, we've got the resources to help you level up. + Community Involvement: We pride ourselves on working with our local communities and giving back where we can. + Integrity & Teamwork: Part of what makes our teams different is our drive to do things right, always, together. **What we offer** At Bridgestone, what really matters is to foster co-creation opportunities and empowering you to be creative and curious to make mobility safer, more efficient, and more sustainable for future generations. Whatever role you fill, when you represent Bridgestone, you are a valued teammate, and part of our larger mission to "Serve Society with Superior Quality", for that, we offer you more than just a competitive compensation; we will provide you: + A supportive and engaging onboarding experience to ensure a smooth transition into our team. + The opportunity to develop and grow, through training and regular mentorship. + Corporate Social Responsibility activities. + A truly global, dynamic and challenging work environment. + Agility and work/life effectiveness and your long-term well-being. + A diverse and inclusive team. _Bridgestone is proud to be an Equal Employment Opportunity employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state or local law._ **Employment Eligibility** If hired, a Form I-9 Employment Eligibility Verification must be completed at the start of employment. Temporary work authorization or the need for sponsorship may disqualify you from employment.

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Automotive Technicians must possess the required hand tools required to perform the applicable job assignment. Responsibilities and Duties Meets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required, throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Requirements Must have an active driver's license issued by the state Must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Must possess the required hand tools required to perform the applicable job assignment. Knowledge and Skills Current documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A/B or A Commercial Driver's License (CDL) - Preferred Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions Our compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.82 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program. Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

* Ensure all tasks assigned are completed in accordance with manufacturer's manuals and FAA accepted or approved data * Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company's, FAA Approved Continuous Airworthiness Maintenance Program * Interpret aircraft technical manuals, and electrical drawings * Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor * Maintain work area in a neat, clean and safe condition at all times * Perform only those tasks for which proper training and qualification has been obtained * Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed * Perform other duties as assigned Minimum Job Requirements: * Hold a Mechanic's Certificate with Airframe and Powerplant ratings. Meet requirements of 14 CFR Part 65.83 * Familiar with parameters and standards established specifically in Federal Aviation Regulations, Parts 43, 65 and 91 * Familiar with basic inventory management functions * Strong interpersonal skills and ability to work harmoniously with others * Familiar with computer data entry, and Microsoft Windows based programs * Capable of lifting 75 lbs * Able to work flexible schedule to include day and night shifts * Willing to travel as needed

EMCOR Services CES has an immediate need for a HVAC Journeyman Mechanic in Washington, DC. The HVAC Mechanic trouble shoots, repairs, installs, and performs preventative maintenance on all the HVAC systems within the Central Utilities Plant (CUP), and other buildings related to the contract by performing the following duties. This is a journeyman position and requires mechanical, electrical, and plumbing aptitudes. This is a part time position. The hours are 9:00 AM to 9:00PM Saturday and Sunday and Holidays. This position is covered by the CBA for Local 99. #EGS #LI-NS1 Essential Duties and Responsibilities: Monitors safe and efficient operations of HVAC/refrigeration systems in accordance with departmental requirements; corrects deficiencies according to PM/CM and manufacturers specifications. Conducts preventive and corrective maintenance on all HVAC and refrigeration systems, as well as fan coil or dx units, and other equipment as assigned. Installs and services new HVAC/refrigeration equipment. Perform all aspects of repairs to Air Handling Units (AHU) to include filter replacement, bearing replacement, motor replacement, belt replacement and proper alignment in accordance to OEM procedures. Coordinates inspections, repairs and installation in consultation with staff in affected areas to minimize disruption of operations. Complete Work Order and Preventative Maintenance (PM) paperwork in a timely and professional manner. Participates in the computerized maintenance management system for work and equipment documentation Participate in the building management system. Monitor design parameters for status and efficiency. Assist in programming recommendations for the system. Track refrigerant loss, procurement, and storage per government standards. Install, maintain and repair all field devices for the Temperature Tracking System. Participate in the testing of HVAC shutdown by duct smoke detectors. Performs heating, ventilation, and air conditioning (HVAC) maintenance on air conditioning units, fans, air handlers, water heaters, converters, duct work and system controls. Request assistance from plumbers, painters, electricians, carpenters, and Building Engineers when necessary. Coordinates inspections, repairs, and installation with staff and tenants in affected areas to minimize disruption of CNRIC operations. Ensures compliance with department safety and quality standards to optimize effective utilization of resources and productivity. Follow and implement standard Lock Out Tag Out procedures. Complete Corrective Maintenance and Preventive Maintenance (PM) work orders in a timely and professional manner. Attends weekly Tool Box safety meetings Obtain OSHA 10 General Industry Safety and Health certification. (EMCOR provided training) Qualifications: At least there (3) years of applicable experience. Must have a current Journeyman HVAC License Must have a current Universal CFC License. Must possess a valid Driver's License. Experience with Microsoft Office Must complete an OSHA 10 General Safety and Health training class (supplied by EMCOR). Must be able to read and understand architectural and mechanical drawings. Must be able to read and understand manufacture's submittals and literature. Review and provide recommendations to preventive maintenance inspections and procedures. Must be able to specify and order material and replacement parts for equipment as necessary. Must be able to understand and implement infectious control policies and procedures. Must be able to work a schedule of 9:00 AM to 9:00 PM Saturday and Sunday and Holidays. This position will require the successful candidate to show proof of a complete COVID-19 vaccination. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee is frequently required to stand. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee maybe exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; cold and heat; risk of electrical shock and vibration. The employee is occasionally exposed to the risk of radiation. The noise level in the work environment is usually moderate. Compensation: $43.39 per hour Other Compensation: NA Benefits: Health and Welfare Benefits consistent with the Collective Bargaining Agreement Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

The Ground Support Mechanic is responsible for support of highly sensitive HQ USAF operational plans and safe air transportation for Cabinet Members, senior military leaders, and visiting foreign dignitaries. **Essential Responsibilities:** + Inspects, repairs and maintains assigned AGE, used to support the transportation of Cabinet Members, and other high-ranking national and international dignitaries. + Dispatches AGE to the flightline to support flying operations and aircraft maintenance. + Uses maintenance instructions and technical data in the inspection, maintenance, and repair of assigned ground equipment. + Maintains hand and powered tools in an orderly manner. Completes maintenance data forms and makes Maintenance Information System (MIS) inputs. Assists in the training and direction of assigned personnel. + Practices good housekeeping, tool control, FODawareness/prevention and safety at all times. + Shall perform other duties as assigned, to include TDY and travel. + Duties involve working with fuel, oils, lubricants, chemical cleaners, solutions and disposal of hazardous material and waste according to environment standards. + Must be able to work, day shift, second shift, third shift and/or weekend shifts as required. + Receives cross-utilization (CUT) training and is qualified to perform maintenance tasks associated within classification. **Minimum Requirements:** + A working knowledge of powered AGE repair procedures is required. + A minimum of a High School Diploma or GED is required. + Specialized courses in powered AGE maintenance are required. + Must be able to read, write, speak and understand English. + Two years recent experience as a powered AGE mechanic or equivalent in powered AGE maintenance is required. + Section 608Technician Universal Certification for refrigerant is highly desired. + Occasional lifting of objects weighing up to 50 pounds is required. + Normal color vision is required. + Must be able to obtain and maintain a secret security clearance: Note: US Citizenship is required to obtain the clearance. + Must be able to obtain and flightline driver's license. **Preferred Qualifications:** + Section 608 Technician Universal Certification for refrigerant is highly preferred. **Compensation & Benefits:** + HIRING HOURLY RATE: **$48.85** . This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: Please visit our careers site: ********************** **Compensation Details:** The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. **Benefits Overview:** Our health and welfare benefits are designed to support you and your priorities. Offerings include: + Health, dental, and vision insurance + Paid time off and holidays + Retirement benefits (including 401(k) matching) + Educational reimbursement + Parental leave + Employee stock purchase plan + Tax-saving options + Disability and life insurance + Pet insurance _Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits._ **Original Posting:** 01/07/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply. Get inspired by our engineers in action! Check out how we celebrated Engineers Week 2025 and what makes our team exceptional - LINK ABOUT THE ROLE You will be a member of our multi-disciplinary team and will work under the direction of a licensed engineer. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. HERE'S WHAT YOU'LL DO Perform and direct design of ductwork, piping and equipment selection for HVAC systems independently on assigned projects. Complex projects could be under the supervision of a professional engineer. As necessary assist with Plumbing and Fire Protection Designs. May supervise or provide project management direction within the mechanical discipline to include the monitoring of project progresses and project budget. Calculate heating, cooling loads, layout, design ductwork, and piping using energy modeling software. Prepare Revit/BIM modeling of construction drawings of HVAC systems from schematic design to construction administration phases including layout, sketches and detail drawings as required. As necessary perform Revit/BIM modeling for plumbing and fire protection systems. Edit specifications relating to existing or new projects. Independently research as need arises and respond to emergent issues. Specify mechanical equipment such as boilers, chillers, and air handling units. Review shop drawings for compliance of specifications and contract documents. Interface effectively with clients and members of the project team, attend Owner, Architect, Construction Administration (OAC) meetings with an understanding and focus on the project budget. Respond to RFI's and review of change orders in the preparation of construction documents. Conduct job site visits to verify existing conditions and observe construction progress. Attend and participate in construction meetings. Site visits frequently require a physical walk-through of site. Coordinates work activities on specific projects with several persons with various levels of capability; participates in business development and marketing activities. Perform other duties as assigned. HERE'S WHAT YOU'LL NEED Bachelor or Master's degree in Engineering required. Bachelor or Master's degree in Engineering from an ABET accredited program preferred. Minimum of 6 years of related experience required. Current PE in the United States preferred. LEED accreditation preferred. Must possess a working knowledge and experience, while still acquiring higher level knowledge. Excellent verbal and written communication skills. Able to effectively handle multiple projects. Experience in computer applications for engineering design programs (i.e. Revit, Trane Trace or Trane 3D Plus) required. The salary range for this position is $76,190.00 to $95,190.00 annually. This salary range is the range we believe is the anticipated range of possible base compensation at the timing of the posting. We may ultimately pay more or less than the anticipated salary range for the position. Employees may be eligible for discretionary bonuses. We offer a full benefit package including medical, dental and vision coverage and flexible spending account options and voluntary insurances. We have paid time off, flex-time schedules, remote work options and a 401k plan and employee perk programs. For a general overview of our benefits, please visit our careers page at ********************************************** Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. Get inspired by our engineers in action! Check out how we celebrated Engineers Week 2025 and what makes our team exceptional - LINK ABOUT OUR FIRM CannonDesign is a design practice where strategy, experience, architecture, engineering, and social impact converge. We don't just dream up solutions - we create and bring them to life in ways to solve some of the biggest challenges facing our clients and the society. At the heart of everything we do is Living-Centered Design, a bold commitment to using our talents to not just improve the world but to truly reshape it for the better. It's more than a philosophy - it's who we are, and it drives us to make a meaningful, lasting difference every day. ABOUT WORKING HERE We are relentless in our pursuit of client adoration (not simply satisfaction). Consistent delivery of the best service is what we are about. We are committed to ensuring our practice provides equal opportunities for all employees, as we strive to connect with communities around us and focus on the future of design. We support equity, diversity, and inclusion efforts that benefit all employees through the leadership of our DEI Council, our Employee Resource Groups which are open to everyone, and other community initiatives. We're about communication and transparency here. If you want to talk to someone about an idea you have, or a challenge that needs addressing, we're ready for you. CannonDesign is an Equal Opportunity Employer. CannonDesign is committed to maintaining a work environment that is free from any and all forms of unlawful discrimination and harassment. It is therefore the firm's policy to prohibit discrimination and harassment against any applicant, CannonDesign employee, vendor, contractor, or client on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by applicable law. It is also CannonDesign's policy to prohibit any and all forms of retaliation against any individual who has complained of harassing or discriminatory conduct, or participated in a firm or agency investigation into such complaints. Please note that candidates can only apply to our positions on our company Careers site. It's not uncommon for scammers to create positions that look legitimate on other sites; never enter your information or apply for CannonDesign positions on any platform. Should an issue arise that you feel we should be aware of, please contact us. As a condition of employment, all employees are expected to complete mandatory training, including compliance training, within required timeframes and adhere to our internal policies and our Code of Conduct.

This position is HYBRID with 50% to 75% travel. This hybrid role requires the employee to reside within 50 miles of one of the following locations: Washington, DC; Albany, NY; or West Virginia. Who We Are: Headquartered in Washington, DC, Versar Global Solutions provides full mission lifecycle solutions for challenges faced by our government and commercial Customers in the natural, built, and digital environments. With nearly 2,000 team members around the world, and a rich legacy spanning more than 70 years, Versar Global Solutions delivers a broad array of planning, analysis and risk management solutions, project and program management, operations and maintenance services, and information technology applications for environmental management and remediation projects, mission critical facilities and installations, and in support of readiness and contingency operations. Who You Are: Versar is seeking Liquid Fuels Mechanics with knowledge and experience to support Versar Global Solutions' team performance on assigned United States Army Corps of Engineers (USACE) Recurring Maintenance and Minor Repair (RMMR) task orders. This position performs site maintenance tasks related to fuel systems, such as identifying and troubleshooting fuel systems discrepancies, minor construction activities, preventative and corrective maintenance, and repair projects. The individual will serve under the direction of the RMMR Site Manager with duties that include performing all phases of work; working with several subcontractors or support staff; ensure compliance with all applicable construction codes, standards, and local regulations; ensuring on-site quality control and on-site safety requirements are met; responsible for all onsite and contractor-controlled documentation. *This position is contingent upon award. What You'll Do: Perform routine maintenance inspections at various U.S. military locations in the continental United States, through anticipation and planning of recurring maintenance activities. Troubleshoot, repair, and maintain Class I, II and III hydrant systems including other supporting equipment and appurtenances. Maintain fuel storage tanks, including inspection reports of the operations for unusual circumstances to include pressure changes, leaks, corrosion, etc. Support development of scopes of work for repair and modification Service Orders for Department of Defense (DoD) Fuel facilities as part of the USACE RMMR program. Repairs will be developed in accordance with UFC 3-460-01 “Design: Petroleum Facilities,” American Petroleum Institute (API) Standard 650 “Advanced Tank & Construction,” and applicable Unified Facilities Guide Specifications (UFGS). Diagnose and correct problems using test equipment, statistical, equipment history, manufactures specifications, and industry-related standards to avoid fuel spills or fuel facility related events. Review repair specifications of equipment or components being purchased or fabricated for repair and construction projects, to ensure compliance with contractual requirements and material specifications. Procure material required by repair or maintenance work. Maintain records relating to maintenance. Document and report all activities in a centrally managed maintenance management system. Maintain good working relationship with coworkers and military management personnel utilizing good judgment in recognizing scope of authority. Investigate and adjust customer complaints and concerns regarding fuel systems maintenance. Maintain knowledge of military standards, Unified Facilities Criteria (UFCs), EM-385-1-1 Safety and Health Requirements Manual, OSHA, EPA, and other industry standards. Adhere to strictly enforced Health and Safety requirements with the highest quality standards expected. Perform all other duties as prescribed by management. What You'll Bring: Two to five years of experience in liquid fuels maintenance or construction on various types of fuel systems that can include marine loading arms, bulk fuel facilities, hot pit fueling systems, gas station dispensing systems, cathodic protection systems, and leak detection systems. Willing to waive some experience and train the right candidate. High School Diploma/GED Proficient in MS Office suite of tools, including Word and Excel; be capable of uploading daily/weekly field reports with photos to cloud-based information management systems. Ability to use/learn QuickBase, eMaint, MaintainX, Timberland and/or other software programs that manage information and schedules. OSHA 30 and/or HAZWOPER training preferred. CPR/First Aid certified preferred Experience with equipment operation and power tools. Possess working mechanical and electrical equipment knowledge. Must possess and maintain an active and valid driver's license without restrictions. Must be proficient in English, both written and verbal, to ensure effective communication and collaboration. Successful results of pre-employment screenings, including federal background check, MVR, and drug screen. Comply with company drug and alcohol policy. Be authorized to work in the US or will be authorized by the successful candidate's start date. Abilities: Ability to communicate verbally with internal and external clients. Able to exercise good judgment and conflict resolution strategies with client issues. Can work independently and is self-motivated; works well towards timelines and goals. Has the ability to apply minor mathematical concepts, including fractions, percentages, as they apply to practical situations; can conduct problem-solving. Able to react to changing situations and retain effectiveness. Physical Demands: This position requires the individual to ascend and descend ladders, scaffolds, stairs and sometimes work in confined spaces in proximity to loud equipment. Must be able to lift and carry (or otherwise move) up to 50 pounds regularly. Must be able to respond quickly to sounds and dangerous situations, if needed. Must be able to wear personal protective gear most of the day. Must be able to sit, stand, and walk, must have close and color vision, use depth and peripheral vision, and be able to adjust focus. Work Environment: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequent field work at construction and client sites will require employee to be exposed to a variety of outdoor weather conditions in fueling facility environments. Employees will wear hard hats, eye protection, hand protection, foot protection and other appropriate safety equipment as needed in the field. Travel Requirements: Frequent attendance at on-site events at designated locations requires the ability to provide reliable transportation and maintain a current, valid driver's license and proof of insurance. Position will require travel at a frequency of 50% to domestic locations. Access to federal installations or other secure facilities will require security badges and employee must be able to obtain basic security clearances. Code of Ethics: All employees are expected to conduct business in an ethical manner and refrain from dishonest or unethical conduct. Employees shall act in a manner which represents their integrity, impartiality and the best interests of the company and its customers. Compensation The salary range for this position varies by geographic location and reflects the minimum and maximum compensation the Company in good faith expects to pay for this role based on market data, internal equity, and the candidate's education, experience, knowledge, skills, and abilities. Washington, DC $52,232 - $58,761 Albany, NY $50,762 - $57,107 Martinsburg, WV $49,158 - $55,303 EEO Commitment Versar Global Solutions is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws. Versar Global Solutions complies with applicable state and local laws governing non-discrimination in employment in every location in which the company operates. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Versar Global Solutions expressly prohibits any form of unlawful employee harassment based on race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, marital status, amnesty, or status as a covered veteran. Improper interference with the ability of Versar Global Solutions employees to perform their job duties is not tolerated. #LI-WJ1

Job DescriptionForklift Mechanic Linthicum Heights, MD | Full-Time | MondayFriday $40-$45 Hourly We are a powerhouse, family-owned leader in material handling service and were expanding. Right now, were searching for one top-tier Forklift Mechanic whos ready to step into the best opportunity of their career. What We Offer health, dental, and vision plans + company-paid life insurance 401(k) with aggressive company match Generous PTO, paid holidays, and paid training Clean, modern facility with the latest diagnostic tools and lifts Your Day-to-Day Diagnose and conquer complex repairs on electric, LPG, and diesel forklifts Master hydraulics, electrics, transmissions, and drive systems Perform OSHA-compliant PMs and inspections Mentor younger techs and run your own service calls when youre ready What You Bring Proven, hands-on forklift or heavy equipment experience Certifications in forklift or heavy equipment repair Strong understanding of hydraulics, engines, transmissions, and electrical systems and schematic-reading skills Clean driving record and professional demeanor Your own professional tools If youre the tech everyone else calls when theyre stuck, we want you.

Job Description Forklift Mechanic - Linthicum Heights, MD | Full-Time | Monday-Friday $40-$45 Hourly We are a powerhouse, family-owned leader in material handling service - and we're expanding. Right now, we're searching for one top-tier Forklift Mechanic who's ready to step into the best opportunity of their career. What We Offer health, dental, and vision plans + company-paid life insurance 401(k) with aggressive company match Generous PTO, paid holidays, and paid training Clean, modern facility with the latest diagnostic tools and lifts Your Day-to-Day Diagnose and conquer complex repairs on electric, LPG, and diesel forklifts Master hydraulics, electrics, transmissions, and drive systems Perform OSHA-compliant PMs and inspections Mentor younger techs and run your own service calls when you're ready What You Bring Proven, hands-on forklift or heavy equipment experience Certifications in forklift or heavy equipment repair Strong understanding of hydraulics, engines, transmissions, and electrical systems and schematic-reading skills Clean driving record and professional demeanor Your own professional tools If you're the tech everyone else calls when they're stuck, we want you.

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 1 year of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: Evening shift Night shift Weekly day range: Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

Who We Are At NPL, part of The Centuri Organization, our employees are part of an established team working to support America's natural gas utility and energy infrastructure. Working at NPL means you are joining a company with over 50 years of experience, long-standing customer relationships, and one that is deeply integrated into our host communities. Come grow your career with us and be a part of something bigger. We are seeking a Fleet Mechanic to support our operations by maintaining and repairing a variety of company vehicles and equipment. This role involves working on cars, trucks, off-road equipment, and small tools in a safe, efficient, and quality-focused manner. The ideal candidate is dedicated to safety, takes pride in their craftsmanship, and understands the importance of keeping our fleet running reliably. Compensation: $30+/hour What You'll Do * Perform diagnostics, maintenance, and repairs on vehicles and equipment, including: * Engines, transmissions, clutches * Suspension, steering, brakes, and HVAC systems * Electrical systems, fuel and ignition (gas and diesel) * Respond to breakdowns and perform emergency roadside repairs when needed. * Conduct preventive maintenance inspections to maximize safety, uptime, and lifespan of fleet assets. * Follow proper documentation procedures including mileage/hours, warranty parts, repair records, and parts ordering/billing. * Perform maintenance and repair welding on equipment. * Maintain a general understanding of DOT regulations * Support other fleet and shop duties as assigned by leadership. What You'll Have * School Diploma or equivalent * Minimum 5 years of experience repairing and maintaining cars, trucks, off-road equipment, and/or small engines. * Working knowledge of: * Automotive and diesel systems * Small engines and construction-related equipment * Ability to diagnose complex mechanical and electrical issues. * Strong communication skills and attention to detail. * General computer competency for work orders and service documentation. * Strong commitment to working safely at all times. What You'll Get * Join the Largest Natural Gas Distribution Contractor in the United States * Weekly Payroll * Paid, on-the-job training for technical skills * Employee Assistance program benefit * Health Insurance Plan benefit * Retirement Plan benefit Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Flexibility to work various schedules and stay late when necessary with little or no notice * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card * Join and maintain Union membership Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Washington DC

Job Description Qualifications: Education And Experience Graduation from a standard high school or possession of GED equivalency certificate and seven years experience performing installation, repair and maintenance of mechanical equipment. Formal schooling from an accredited vocational school with a major in a related field may be substituted for experience. Education experience may be substituted on a year-for-year basis for up to three years of the required experience. Knowledge, Skills and Abilities Appointment to some sites may require ability to obtain a security clearance. Ability to communicate effectively, orally and in writing and the ability to follow oral and written instructions. Ability to lift 50 pounds. Licenses And Certifications Possession of a valid driver\'s license meeting the requirements of Maryland law, the MES Fleet Policy and other MES Policies. Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand and walk and use hands and arms to handle equipment. The employee is also regularly required to hear and talk. The employee is occasionally required to stoop, kneel, crouch or crawl and climb to service equipment. Appointment to some sites may require confined space entry. A confined space is large enough that an employee can bodily enter and performs assigned tasks, but has limited o restricted means for entry or exit and is not designed for continuous employee occupancy. These areas could include tanks, manholes, silos pits, vaults, spillways, vessels, etc., and have the possibility to contain an atmospheric hazard. Employees working at these types of facilities will be required to enter and perform the work involved with confined spaces, and will be required to adhere to all safety procedures and participate in trainings associated with confined space entry. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. The employee is occasionally required to lift 50 lbs, using proper lifting technique and regularly required to use proper protective equipment such as coveralls, vision and hearing protection, steel-toed shoes and hard hats when necessary. Responsibilities: BIH Mechanic Responsibilities: Mechanic will provide the following services: routine maintenance and support, environmental monitoring, and Site development construction support. Routine Maintenance and Support Work will include, but not be limited to, the following: Assist the site supervisor in maintaining the daily Operation Log and monitoring the groundwater gradient monitoring system, by completing daily inspections and completing daily inspection logs. Maintenance of the process pumps: quarterly check of bolts, packing and alignment, and an annual performance test. Monitor the groundwater collection and transfer operation: monitor system performance and maintain all valves and process piping within the tank room and truck transfer bay. Annual cleaning of the two 11,000-gallon storage tanks and inspection/cleaning of the truck transfer bay collection sump. Repair/re-thread man-hole lid bolt threads and roadway vault access hatch threads Maintenance of the extraction well system pressure gauges at least quarterly or more frequently as determined by the Honeywell site representative. Measure water levels of the piezometers to verify the accuracy of the ultrasonic water level measurements on a monthly basis. Monthly inspections of the extraction well vaults and any maintenance activities identified during the inspection. Inspection and maintenance of the valves (testing opened and closed) and pressure relief valves on a monthly basis. Assist in monitoring the pumping activities of each well system pump and, monthly, inspect the well system pumps by turning them on and off if they do not already cycle on at least a monthly basis. Control vegetative growth on the outboard embankment with an annual herbicide application. Portions of the site will be inspected for the presence of debris. General trash will be removed as access and safe conditions allow. Periodic visual inspection of the site surface soil and multimedia caps, to detect any problems with the cap system. The cap surface will be inspected annually and after storms to detect water ponding that may indicate settlement. Calibrate 4-gas confined space entry meters. Fault find/repair/replace ultrasonic water level sensors Fault find remove/repair/replace electric piston pumps Safely load leachate tanker trucks Position Summary Performs installation, maintenance and repair of mechanical equipment used for a variety of environmental projects. Essential Functions Installs, repairs and maintains mechanical equipment, including heavy equipment and vehicles, as needed, on project sites. Ensures that the installation and repair of equipment complies with agency policy and local codes and regulations. Replaces units or parts, such as gears, bearings, and filters. Tests newly installed and pre-existing mechanical equipment. Orders replacement parts for equipment. Identifies and confirms time frame for completion of repairs. Uses precision tools such as micrometer migs, dial indicators and RPM indicators. Communicates the necessity for proper and timely maintenance of all equipment to operators and/or management personnel. Assists management personnel to train on site staff in proper equipment maintenance techniques. Works with management and other maintenance staff to develop and implement a preventative maintenance program for project mechanical equipment and/or vehicles. Other Responsibilities Persons appointed to this position are subject to be called to duty in emergencies. Performs other work-related duties as assigned. Supervisory Requirements May include responsibilities for overall direction, coordination and evaluation of managed staff, interviewing, hiring and training employees; planning, delegating and directing work; appraising performance; rewarding and disciplining employees; and addressing complaints and resolving problems.

Summary/Objective: The Mechanic is responsible for the proper repair and maintenance of all company vehicles and equipment and for the safe and proper care of equipment assigned to the mechanic. Essential Functions: Maintain and repair automotive vehicles (such as trucks, tractor-trailers, pickups, cars, heavy equipment, and mounted equipment such as mixers and hydraulic systems) and stationary equipment (such as air compressors, welding equipment, and miscellaneous equipment) to company standards; recognize failure symptoms, trouble shoot, inspect, repair or replace, reassemble and test. Coordinate with Manager to ensure the proper parts and supplies are available when needed. Recognize potential problems before they occur and perform or order the necessary repair work. Coordinate with the Manager and other mechanics to get the work done. Complete all required paperwork accurately. Supervise the Mechanic's Helper ensuring that he/she performs all work as required and follows all company policies and procedures. Operate vehicles and equipment in a safe manner at ALL times. Wear all required safety equipment. Follow all safety guidelines and notify the Manager or Safety immediately of any current or potential safety issues. Perform all required inspections. Follow all environmental regulations. Dispose of chemicals, trash, etc. in designated areas. Recycle when required. Notify the Manager immediately of any current or potential environmental problems. Keep the shop area and all tools, shop vehicles, and equipment neat, clean, and in good repair. Clean work area at the end of every work shift. Maintain security of all company equipment and tools at all times. Notify the Manager of any problems. Drive shop vehicle to various plant sites, road calls or other sites of broken equipment. Drive broken and repaired equipment when necessary. Other duties as assigned. Non-Essential Functions: Pick up equipment or supplies. Train other employees. Fill in for colleagues as needed. JOB SPECIFICATIONS Work Environment: Work time will be split between indoors/shop and outdoors/field. Exposure to dust and fumes/offensive smells. Exposure to chemicals such as fuel, grease and oil. Close proximity to moving mechanical parts. Noise level will be moderate to loud. Physical Demands: Lift a maximum weight of 100 lbs., repetitively lift 25 lbs., carry approximately 100 lbs., and push/pull approximately 50 lbs. Reach overhead and reach away from the body, pinching and gripping. Walk 1 hour per day, stand 4 hours per day, kneel 1 hour per day, squat 1 hour per day, climb 1 hour per day, lay on back 2-3 hours per day. ADDITIONAL QUALIFICATIONS Experience: Experience maintaining and repairing diesel engines. Special Skills: Written communication, verbal communication and basic mathematical skills. Basic computer knowledge. Ability to learn and use iPad, iPhone and company software applications. Certifications: Valid driver's license, CDL preferred. DOT certification. ASE certifications preferred. Mack training preferred. Industry Related Experience or Skills: Familiarity with mechanical maintenance of concrete mixers, dump or refuse trucks. Education Required: High School Preferred Education: Vocational or trade school training Bilingual in Spanish Preferred: Yes

The Distribution Mechanic III is responsible for maintaining and repairing all equipment, piping systems, valves, and machinery at our power plant located in Baltimore, Maryland. This is a full-time, hourly, union position and reports to the Distribution Manager. The compensation for this position is $34.16 per hour plus a 10% bonus target. Responsibilities Maintain safe working conditions in accordance with established Company policies Identify, report and/or correct unsafe work environments Operate all hand/power tools in a competent manner Install, repair, replace, and trouble shoot piping systems, valves, steam traps, pumps Perform preventive maintenance as scheduled Must be able to work overtime as required Exercise caution in the use and maintenance of all company equipment Respond to emergency situations immediately and work quickly to correct the problem(s). Participate in training to continue education and skills in craft Demonstrated ability to communicate orally and in writing Perform other duties as assigned by Distribution Manager Participate in training to further welding skills, as needed by the department Takes rotating, on-call (beeper) on weekends, back shifts, and holidays Must be able to work overtime as required Basic Qualifications HS Diploma or GED Minimum one year experience in an industrial maintenance setting Preferred Qualifications Ability to work with minimum supervision Ability to perform basic computer operations and use email Other Qualifications Valid MD 4th or 5th Grade Stationary Engineers License Minimum one year Pipefitting experience Minimum one year Welding experience Minimum one year Rigging certification Physical Requirements Must possess a valid driver's license and insurable by Company's vehicle insurance carrier. Must have and maintain a driving record meeting the standards of the company. Must complete pre-employment screenings including a company physical exam in addition to drug testing. Ability to lift and maneuver up to and including 50 pounds. Ability to work in confined spaces. Ability to climb and tolerate heights up to 100 feet. Must be able to walk, stand, lift, climb, bend, kneel, stoop, and/or reach. Ability to tolerate heat in an industrial production plant environment. Benefits Personal Leave FMLA up to 12 weeks based on approval Nonpaid benefit Paid Time Off (PTO) 120 hours accrued annually which equals 4.62 hours per pay period Sick Leave 40 hours per calendar year prorated based on month of hire Paid Parental Leave 100% pay up to 160 hours upon birth or adoption of a child; must be used in weekly increments 7 paid holidays annually Floating holidays 40 hours per calendar year prorated based on month of hire 401K plan Including Roth option with matching contributions: 100% of first 1% your contributions and 50% of the next 5% of your contributions.

Company: Keystone Aerial Surveys, a Vexcel Company Why Work With Us? Keystone Aerial Surveys, a Vexcel company, is at the forefront of high-resolution aerial imagery and geospatial data. Our cutting-edge services power industries like government, insurance, telecommunications, and more. If you're passionate about aviation and want to work with the best in the field, this is your opportunity! What You'll Do: As our A&P Mechanic with IA (preferred), you'll take the lead in maintaining, repairing, and inspecting our aircraft to the highest standards. You'll also handle the installation and removal of our advanced aerial cameras and sensors, ensuring everything is flight-ready and FAA-compliant. Responsibilities: Ensure aircraft and equipment compliance with all FAA, OSHA, industry, and company guidelines, maintaining them in a clean and orderly condition Complete necessary maintenance, repairs, and/or replacements on aircraft, subsystems, and components Install and/or remove a variety of aerial cameras and sensors in compliance with FARs and manufacturer's installation procedures Perform inspections and preventive maintenance of aircraft and equipment, managing and scheduling maintenance events Conduct 50/100/Annual inspections with certification as per IA requirements Maintain a clean, safe, and orderly environment in hangars, workshops, and other areas Maintain complete and accurate maintenance records and reports

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits? Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What's in it for YOU: * Competitive Pay Rates! Starting rate - $33.32/hour * 40 hours a week, not flat rate * OT as needed over 40 hours * Full Benefits: Medical, Vision, Dental, Life, Supplementals (STD, LTD, FSA, AD&D, etc.) and 401K plan * PTO, Paid Vacation and Sick (accrued) * Company provided uniform * (9) Paid Holidays * Maximum Boot Allowance of $250 (per anniversary) * Quarterly Attendance Bonus - If an employee does not rceive more than (2) attendance points during the previous 12 months-earn (1) Attendance Bonus Day. Year (2) you could earn (1) Bonus Paid Time Off Day and (1) Quarterly Attendance Bonus. Also, an employee who receives no attendance points will receive a quarterly bonus of $50. Paid in 1st week of second month following the quarter. * Corporate partner discount program * Career advancement through a national company Duties include, but are not limited to the following: * Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components. * Perform scheduled preventative maintenance of vehicles * Execute major and minor repairs of defective components. * Document all activities in MV's Fleet Management System. * Maintain work environment in an organized and safe condition. Qualifications Talent Requirements: * High school diploma or equivalent. * Combination of at least one (1) to two (2) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. * Must be able to pass a pre-employment drug screen and random drug testing. MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Human Resources announces a 1.0 FTE Roofer Mechanic. This is a 260-days, M-08 position located at Facilities & Operations. EDUCATION: Completion of tenth grade (preferably completion of high school), including some courses in industrial arts and/or shop mechanics, supplemented by training equivalent to an apprenticeship in the trade. LICENSE/CERTIFICATION: Valid driver's license; NOTE: All APS employees authorized to drive APS vehicles are subject to either Omnibus Transportation Act drug and alcohol testing procedures (if required to possess a CDL) or the Arlington Public Schools Alcohol and Drug testing procedures (if CDL is no required). PHYSICAL ATTRIBUTES: Possession of the strength and dexterity and fine and gross motor skills required to perform all essential functions, including lifting and carrying heavy objects; balancing self, materials and tools on high and/or slanted surfaces; assembling and disassembling scaffolds and equipment; and operating or utilizing all tools, equipment and vehicles. Work requires significant time spent standing, bending, stooping, working in tiring positions, and working from ladders or scaffolds. HAZARDS/UNUSUAL DEMANDS: Work involves working indoors and outdoors under a wide range of climatic conditions. Exposure to harmful fumes and sprays require use of safety goggle masks, gloves and proper ventilation. Work is performed on ladders, scaffolds, and rising platforms to a height of 40 feet. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES (The following may not include all the required skills or duties performed): Knowledge and ability to operate a broad range of power and hand glazier, roofing, carpentry and sheet metal fabrication tools and equipment; Knowledge of the common procedures, materials, hazards and safety precautions associated with roofing, glazing, and related construction activities, and ability to respond appropriately in hazardous situations; Knowledge of national, state and local codes and regulations relevant to trades; Ability to follow and give oral and written instructions, and to read and interpret plans, diagrams, drawings, prints, schematics, etc.; Ability to use arithmetic computations to measure, calculate quantities and cost, etc., and ability to maintain records; Ability to develop and maintain good leadership and interpersonal relationships; Reliable, flexible and dependable ESSENTIAL FUNCTIONS OF THE CLASS (May not include all duties performed not all incumbents perform all essential functions delineated): Performs semiskilled level maintenance, repair, and construction tasks in the glazing and roofing trade; Attends formal courses or performs on-the-job training tasks equivalent to apprenticeship training; Reads and interprets blueprints, sketches, technical instructions and manuals.