Diesel technician jobs in Bossier City, LA

Job Posting End Date 12-25-2025 Please note the job posting will close on the day before the posting end date Perform maintenance/repairs on sedans, light/medium/heavy trucks, trailers and heavy work equipment and any attached equipment, and/or auxiliary equipment, which is part of the specialized vehicles, operated by the Company. The following list sets forth the principal duties required for the job. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. Job Description ***Must be 30 mins from the Shreveport Service Center**** ESSENTIAL JOB FUNCTIONS: 1. Service and repair boom/pedestal assemblies of the Company's specialized equipment including troubleshooting equipment; inspect cables, chains and rods; inspect sheave liners; inspect and repair monitoring system; inspect fiberglass components; inspect turntable; remove and replace reduction gearboxes; inspect pins, bushings and bearings; and load test boom assemblies. 2. Service and repair hydraulic systems including troubleshooting the hydraulic system; inspect, remove and replace hydraulic pumps, motors, valves, cylinders and the accumulator; and remove and replace swivel collector block. 3. Service and repair heating and ventilation systems including diagnose A/C unit problems; conduct pressure test on A/C unit; check for leaks using appropriate devices; check internal system controls; replace compressor; service A/C clutch assembly; and replace compressor seals, refrigerant hose, condenser assembly, receiver dryer, and evaporator core. 4. Troubleshoot and repair winch assemblies. 5. Service and repair the steering system of Company vehicles including repair power steering pump and manual steering gearbox. 6. Service and repair the air brake systems of Company vehicles including air compressors, air brake chambers, and air control valves. 7. Service and repair hydraulic and electric braking systems including inspect and repair master cylinder; test power unit and vacuum supply; inspect power boost system; repair power brake system; and service and repair antilock brake system. 8. Inspect and service differentials and power dividers and transmission assemblies of Company vehicles including manual clutch, manual transmissions and transfer cases, transaxles (front-wheel-drive), and automatic transmissions. 9. Service and repair the fuel and exhaust systems including computer control system; test and repair diesel fuel pump; inspect and service intake and turbo system; service and repair fuel injection system (gas/diesel); and inspect and service governors. 10. Assist others in the diagnosis of more complex problems. 11. Operate Company vehicles and associated equipment and perform duties incidental to the operation of such equipment. 12. Maintain tools, equipment and work area in a clean and orderly condition. 13. Maintain records and submit reports as required. 14. Attend and participate in training as assigned and assist in the training of other employees. 15. Perform less skilled work as assigned. 16. Report irregularities and abnormal conditions. 17. Assist employees of equal or higher classification. 18. Direct the work of employees assigned to assist. MINIMUM REQUIREMENTS: Education: High school graduate or GED required. Experience: At least 2 years of strong automotive mechanical diagnosis with hydraulic and diesel repair experience. Graduation from an automotive trade school with diesel engine experience is highly desirable. Licenses/Certifications: Must possess and maintain a valid state driver's license. Must obtain Class A CDL within 12 months of entry date into the Fleet Technician B classification or vacate the job classification.Must obtain Fluid Power Society Certification and two (2) applicable ASE certifications within 24 months of entry date or vacate the current job classification. OTHER REQUIREMENTS: These are additional expectations for the job and could include specific work experience, license / certifications, preemployment testing, expectations about travel, shift work, etc. 1) Must qualify through demonstration, examination and/or performance appraisal as determined by the Company. 2) Must exhibit competency and aptitude in the fundamentals and mechanics of vehicle maintenance and repairs. 3) Must become familiar with and have the ability to operate the computer systems utilized by the Fleet Services organization. 4) Must acquire within such time frame as determined by the company, the qualifications necessary to perform the duties of the Fleet Technician A, or vacate the current job classification. 5) Successful completion of the Tuff Tech pre-employment placement test is required for this position. 6) For Fleet Techs that support Transmission, travel of 80% - 100% may be required. 7) Shift work may be required PHYSICAL DEMANDS: List any physical demands required for this job 1. Work at heights - climbing ladders and on/in large trucks and equipment 2. Frequent use of hand tools including various heavy equipment for repairs, ability to grasp, push, pull 3. Ability to lift up to 100 pounds, working in awkward positions, working overhead 4. Frequent walking, standing on concrete and occasionally in rough terrain 5. Ability to operate trucks and heavy equipment Compensation Data Compensation Grade: U072-R28 Compensation Range: $33.12 - $41.08 The Physical Demand Level for this job is: H - Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work. Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

Trailer Mechanic, Earn up to $35.07 hr Full-Time, Monday - Friday, Various Shifts Earn 1 week of vacation after 90 days of employment and enjoy an excellent benefits package that includes our very own employee resorts Click here to learn more about our employee resorts R+L Carriers has an immediate opportunity for Trailer Mechanics at our Shreveport, LA Service Center. As a Trailer Mechanic, your responsibilities will include the diagnostic process, repair work, and overall maintenance of our trailers. Click here to learn more about being a Trailer Mechanic R+L Carriers - Women in Trucking Company Culture Requirements: Experienced in performing safety inspections of equipment and prepare safety documents required by the Federal Motor Carrier Safety Administration (FMCSA), company, and any other Federal, State, or Local regulations Must be able to Interpret technical manuals Must have experience in repairing or replacing defective parts, components, or systems Experience in testing equipment for proper performance and to ensure that the work meets manufacturer's specifications and legislated regulations Experience in trailer PMs and repairs Must be able to lift 50lbs Must own your own tools Must be dependable Must be prepared to work in climate situation when needed. Preferred: Experience using Cetaris Maintenance Work Order System Welding Experience driving yard tractor/trailers Previous experience working on Class 8 commercial vehicles Sheet metal and composite panel repair Benefits: R+L Carriers offers an excellent compensation and comprehensive benefits package that includes Medical/Dental/Vision Insurance, 401(k) Retirement Plan with company matching

Job Description Evening Diesel Technician With direct supervision from a Lead Technician, Fleet Maintenance Supervisor or Maintenance Manager, a Maintenance Technician performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components; refuse bodies, including control, hydraulic, and electrical systems; air brake systems; general engine work; HVAC components; and suspension, drive train and steering systems. Enjoy the benefits of working on a single fleet with state-of-the-art equipment, supporting our drivers as they run their routes, and servicing some of the most technically advanced vehicles on the road. Tackle a new challenge every day. Waste hauling experience is a plus, but not required. Maintain and repair highly intricate and powerful machinery. Receive training on new technologies and equipment. Work a regular shift in a stable industry. Be recognized for exceptional performance. Serve your community and your customers. Follow strong career paths for professional growth. Enjoy competitive wages and benefits. Compensation: $28 - $34 Responsibilities: Maintains advanced knowledge of, and strong skill proficiency in, the following vehicle components and systems, with the ability to perform complex repair maintenance functions, both on-site and on the road. Chassis component repair and maintenance. Refuse bodies, including control, hydraulic, and electrical systems; Air and hydraulic braking systems. Engine repair and maintenance. Suspension, drivetrain, and steering systems. Heating and air conditioning systems. Line maintenance, welding, and fabrication. Identifies the source of the malfunctions using a variety of electronic tools. Completes applicable Company training programs. Performs other job-related duties as assigned or apparent. Waste hauling experience is a plus, but not required. Qualifications: 3 years of experience as a technician working on heavy-duty trucks. Ability to perform inspections and repairs without supervision in some (not all required) of the following heavy truck or automotive systems: Suspensions, Steering, General Engine, Transmissions, Brakes, Electrical, Hydraulics, Drive Train, Diesel Emissions. ASE Heavy Truck Certifications (T1-T8) are a plus but not required. LNG and/or CNG experience is a plus, but not required. MINIMUM REQUIREMENTS Valid Driver's License. About Company Our company leaders have more than 70 years of combined experience in the waste services and trucking industries. Through the in-depth knowledge and experience our team has accumulated, we've gained unique insights into how to bring both higher-quality service and greater value to our customers. Comprehensive medical benefits coverage, dental plans, and vision coverage Health care Short- and long-term disability Employee and Family Assistance Program (EAP) Employee discount programs Retirement plan with a generous company match We started Live Oak Environmental to provide better, long-term environmental waste solutions to our neighbors in Northwest Louisiana. From curbside to small business to industrial scale, our goal is to provide reliable, world-class waste services at a fair price while maintaining the strong ethic and personal attention of a local business.

Overview Mercedes-Benz of ShreveportCONSIDER A CAREER WITH US! | WE ARE HIRING!INDUSTRY LEADING PAY, PLUS BONUSES!Up to $2,500 Sign-On Bonus for Qualified Candidates! * We are Mercedes-Benz of Shreveport, which is part of the fast-growing Group 1 Automotive, a leader in automotive retail and service. We are growing and need to add Sprinter Technician/Diesel Mechanic, to our team! Are you an experienced Sprinter Technician ready to advance your career? Are you ready to work in a technician focused environment with all the tools and support to maximize your earnings potential? If you answer yes, then we want to meet you! You have several ways to apply so apply now! Our Sprinter Technician/Mechanic should be passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees. The salary range for this position is between $35 - $60 per flag hour. In addition to competitive pay, we offer our associates the following benefits: Relocation Package Contingent on Experience Paid Training A Great Working Environment with the Latest Equipment Continuous Job Training and Career Advancement Opportunity Structured, Self-paced and Paid Training Opportunities Manufacturer and Group 1 Recognition Health, Dental, Vision Insurance, Life and Disability Insurance 401(k) with company match, Paid Time-off Employee Vehicle Purchase Program Employee Stock Purchase Plan What we Look for: Experience preferred as a Mercedes-Benz Master Sprinter Technician National Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance preferred. Strong focus on achieving a great customer service experience High attention to detail What you will do: Efficient and accurate work in accordance with dealerships and factory standards Complete system diagnostics and full automotive troubleshooting and testing Road-test vehicles to ensure quality work Maintain an organized shop area Communicate directly with service advisors regarding the status of the service work Continuously learn new technical information and techniques You need… A Love of Everything Automotive A Positive & Friendly Attitude Tools Based on your Experience Communication Skills Basic Computer Skills Strong Desire to Provide Exceptional Client Experience Ability to Achieve Targeted Goals High School Diploma or Equivalent Must have a Valid Driver's License and Driving Record Group 1 Automotive, a Fortune 250 company, is a leading operator of automotive dealerships and collision centers across the United States and United Kingdom. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. To learn more about our company, visit ******************* Apply today or refer a qualified friend. *All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* Group 1 Automotive is an Equal Employment Opportunity employer and participates in E-Verify. Not ready to apply to a position? Sign-up to let us know about your interest in a career with Group 1 Automotive.

Description: The Dobbs Truck Group is a growth company that successfully expands our operations and customer base through a high-quality team of employees. Dobbs Truck Group operates 25 commercial truck dealerships through two operating companies - Dobbs Peterbilt and Western Truck Center. These dealerships represent some of the best commercial truck brands including Peterbilt, Volvo, Mack, Autocar, and Hino and include locations in Arkansas, California, Louisiana, Mississippi, Oregon, Tennessee, and Washington. We offer a competitive benefits package including medical, dental, vision, long-term disability, life insurance, and 401(k), as well as paid vacation and sick leave. Our Company is looking for long-term employees that we can invest in and grow with as we pursue our mission of being the premier commercial truck dealer group. I. General Job Description This position will be responsible for the maintenance and repair on all types of commercial trucks and equipment while working out of the fully equipped mobile service truck. This position will be responsible for the diagnosis and repair of all vehicles and equipment serviced by the Company's facilities. This position will be expected to perform with the highest degree of professional competence, as it relates to quality of work, product knowledge, and customer service. The duties listed below are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Responsibilities Complete repairs in estimated time per industry standards. Grow and maintain the customer base Perform DOT inspection, troubleshooting, and repair on all areas of a vehicle including electrical, charging systems, starting systems, engine, HVAC, powertrain, and chassis components. Repairs include diagnosis and removal of injectors, cylinder heads, camshafts, main bearings, rod bearings, and transmission/clutch components. Utilize various diagnostic equipment, software, and technical publications/information to determine root cause of customer complaint and repair solution. Maintain service truck, supplied tooling, and parts inventory to Company's expectation. Provide thorough documentation that supports complaint, cause, and correction. Perform preventative maintenance when requested. Respond promptly to customer requests and foster customer relationships. Report to customer and service administration on any deferred repairs. Flexibility to be available after hours and alternate days. II. Minimum Job Qualifications 18 years of age. 4 years of dealer experience as a Diesel/Service Technician. Valid Commercial Driver's License and a qualified MVR abstract. Minimum tool requirements (see below). III. Desired Job Qualifications High school graduate or GED with 5 years of experience in a truck dealership or equivalent experience. Ability to work independently with minimal supervision. Great customer service skills. IV. Mental Capability Requirements Comprehension: Ability to understand complex problems, collaborate, and explore alternative solutions. Organization: Ability to organize and prioritize work schedule on short-term basis (more than 1 month). Reasoning & Decision Making: Ability to make decisions with moderate impact on immediate work unit. Communication: Ability to communicate effectively with individuals utilizing a phone. Mathematics: Ability to compute, analyze, and interpret numerical data for reporting purposes. V. Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to handle or feel, reach with hands and arms, and talk or hear. The employee is frequently required to stand, walk, climb or balance, stoop, kneel, crouch or crawl, and taste or smell. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 65 pounds. Specific vision abilities required by this job include color vision, peripheral vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and risk of electrical shock. The employee is frequently exposed to wet and/or humid conditions, extreme heat, and vibration. The employee is occasionally exposed to high, precarious places, fumes or airborne particles, toxic or caustic chemicals, and outside weather conditions. The noise level is normally loud. VI. Common Expectations of Performance for all Employees The following includes common expectations for all employees of the Company. The evaluation of job performance will be based on these common expectations as well as the position-specific responsibilities described above. Communications, Teamwork, and Feedback to Others Contribute to a work environment that is based on trust and respect. Have discussions on a regular basis with their manager to discuss opportunities to best achieve individual performance objectives and departmental goals. Suggest ways to improve the efficiency of conducting their job duties. Promote continuous improvement and change to support company growth. Mentor others unselfishly. Give credit where it's due. Company Loyal Policies and Work Ethic Adhere to the policies contained in the Employee Handbook. Adhere to the Company's Employee Conduct Policy. Support management decisions toward meeting company goals. Be open and receptive to new ideas, regardless of their origin. Make prudent decisions, which are based on the best interest of the Company and its long-term future. We are an Equal Opportunity Employer Dobbs Truck Group operates 25 commercial truck dealerships through two operating companies - Dobbs Peterbilt and Western Truck Center. Dobbs Peterbilt and Western Truck Center are equal opportunity employers that values a broad diversity of talent, knowledge, experience, and expertise. We foster a culture of inclusion that drives employee engagement to deliver superior performance to the communities we serve. Dobbs Peterbilt and Western Truck Parts do not discriminate in hiring or employment on the basis of race, color, religious creed, national origin, sex, ancestry, pregnancy, genetic information, gender identity, sexual orientation, or marital status; or on the basis of age against persons whose age is 40 and over, or on the basis of physical or mental disability; or to disabled veterans or to Vietnam veterans. We are proud to be an affirmative action employer and encourage minorities, women, individuals with disabilities, and veterans to join our team. Requirements:

Department: Service Reports To: Service Manager Our Technician is responsible for performing high-quality maintenance and repairs on medium and heavy-duty vehicles. This role ensures safety, customer satisfaction, and efficient operations by following established repair procedures and maintaining a clean and organized workspace. Key Responsibilities Conduct routine inspections and diagnostics to vehicles and equipment. Read job orders, observe and listen to vehicles in operation to determine malfunction, and plan work procedures. Examine protective guards, loose bolts, and specified safety devices on trucks - making adjustments as needed. Tag all warranty parts and returns to the warranty clerk. Maintain accurate records of all maintenance and repair work performed. Collaborate with team members to troubleshoot complex mechanical issues. Operate forklifts as needed for moving parts and equipment within the shop. Attend training classes and keep abreast of factory technical bulletins. Develop and maintain positive relationships with customers to increase overall customer satisfaction. Mentor coworkers and apprentices through hands-on coaching, knowledge sharing, and guidance to encourage skill growth and team success. Take ownership of challenges and opportunities by addressing issues promptly, finding practical solutions, and continually seeking process improvements. General Knowledge and Skills You Will Need Maintain up-to-date knowledge of vehicle maintenance and repair practices, applying this understanding to daily tasks. Apply knowledge of International's repair and maintenance procedures, including troubleshooting techniques, technical vehicle systems, tools, and documentation. Communicate clearly and respectfully with team members, leadership, and customers to promote understanding, build trust, and encourage open dialogue. Effectively plan and organize daily tasks by setting clear priorities and using available resources to meet goals that support overall team and organizational success. Uphold and promote a safe, healthy, and compliant work environment by following and reinforcing safety policies, procedures, and regulations. Utilize software systems and digital tools effectively to perform job-related tasks, streamline workflows, and support accurate, efficient service delivery. Desired Education and Experience Medium or heavy-duty technician, equivalent experience or qualification High school diploma or general education degree (GED) Applicable certifications related to industry, products, and/or safety Valid driver's license is required; currently maintains or can obtain a Commercial Driver's License (CDL) Benefits Health Insurance 401(k) Retirement Plan Paid Time Off (PTO) Competitive Wages Flexible Scheduling Technician Benefits Growth opportunities Discounts on products and services Uniforms provided Work environment OSHA certified to current Air Quality Standards Clean and professional work environment ASE and state inspection certification reimbursement and all training expenses paid to further your career Continued education Manufacturer hands-on and web-based training Mentorship Program More About Pliler International As a family-owned and operated business, we treat our employees like family. The majority of our employees have been with us for 10+ years. The Pliler International team enjoys a stellar culture with opportunities for advancement and growth. Our pay structure tops the industry with an emphasis on being rewarded for knowledge, growth, and certificate acquisition. Join our crew if you're looking for more than just another job. This is not necessarily a list of all the duties, responsibilities and requirements associated with this position. While the accountabilities noted herein are intended to be an accurate reflection of the current job, the dealership reserves the right to revise the functions and duties as circumstances dictate. We are an Equal Opportunity Employer.

Division: Louisiana Work Schedule: Monday - Friday; 11AM - 7:30PM Why you will love Coca-Cola UNITED? About us: * Privately owned and operated with 100+ years of historical strength and stability * Dedicated to supporting internal career growth through on job training, learning and opportunity for career advancement * Excellent Total Value Benefits Package to include: * Two weeks paid vacation within first year * Comprehensive Medical Preferred Provider Plan * Dental, vision, flex spending * Employee Assistance Program * Company paid life insurance ($50,000) * Additional optional insurance (accident, critical illness, universal life, home & auto) * Paid maternity & paternity leave * Paid holiday & sick time * 401(k) match (50% on first 6%; plus an additional annual match of up to 3%) * Exclusive employee discounts (cell phone, event tickets, gym membership, car buying, hotels, car rentals, technology needs and much more) * Competitive Compensation * Fast paced environment promotes a healthy lifestyle * For qualified candidates we offer an amazing CDL Tuition Program reimbursable up to $5250 for CDL school tuition - ask your Recruiter for details Job Description The Fleet Mechanic 2 is responsible for maintaining, troubleshooting, and repairing Company fleet equipment to include, class 1-8 diesel and gasoline trucks, trailers, pallet jacks, and forklifts by performing the essential job duties. What your day will look like: * Perform various preventative maintenance tasks and inspections on all types of fleet equipment * Troubleshoots mechanical and electronic malfunctions, perform all types of repairs, rebuild/replace major equipment components * Perform emergency roadside services as needed * Research and order parts, accurately record usage, and asset in managing stock inventory * Complete electronic work orders, ensure all information is recorded in computerized maintenance system * Assist team members with troubleshooting & repairs, researching parts, and inspecting equipment * Maintain a clean and safe working environment, following all Good Manufacturing Practices * Performs appropriate duties as assigned by management What you need to succeed: * Minimum age of 18 years old * Class A CDL preferred * Personal Protective Equipment (PPE) as required by position and compliance with UNITED safety policies * Regular and prompt attendance is an essential function of the job * Ability to read, write and speak English * Ability to maintain a neat professional appearance within Company guidelines * Ability to maintain safety and security of Company assets * Ability to utilize all Company provided resources and technology * Valid driver's license required and obligation to maintain compliance with UNITED fleet policy * High school diploma or general education degree (GED); or three years' related experience and/or training; or equivalent combination of education and experience * Advance knowledge of mechanical, electrical and hydraulic systems on light duty, heavy duty and material handling equipment * Ability to operate hand tools and others such as bench grinders, torch, drill press, jacks and jack stands, Sawzall, etc. as required to perform work * Ability to utilize all Company provided resources and technology * Willingness to work weekends, holidays, or flexible schedule as required * Ability to prioritize and plan work activities to ensure efficient use of time * Ability to work in a positive and productive team environment * Ability to show initiative, problem solving, technical skills, and demonstrate teamwork Physical Requirements Position will be required to comply with the CCBCU Personal Protective Equipment Program. Position is required to wear safety toed shoes when performing the following tasks: Operating Powered Industrial Equipment or Working in an Area where Powered Industrial Equipment is in use, Fleet Maintenance, Working with Palletized Product, Use of Hand Trucks/Dollies to Deliver Product, Cooler Services, etc. (X) None = 0% (0 hrs) (L) Limited = 1% (1 hr) (O) Occasionally = 2%-25% (1-2 hrs) (F) Frequently = 26%-50% (3-4 hrs) (R) Repeatedly = 51%-75% (5-6 hrs) (C) Continuously = 76%-100% (7+ hrs) Requirement Frequency Sit L Stand R Walk F Bend F Kneel/Squat F Climb Stairs O Crawling O Overhead Reach F Typing L Vehicle Operation R PPE/Special Clothing F Grasp F Push/Pull F Fine Manipulation F Lift up to 50 lbs F Carry up to 50 lbs F Pushing up to 50 lbs F Pulling up to 50 lbs F Exposure to Water O Exposure to Chemicals O Exposure to Weather F Exposure to Noise R CCBCU is an Equal Opportunity Employer Minorities/Women/Veterans/Disabled. Veteran friendly. Nearest Major Market: Shreveport

Mike Morgan Automotive is looking for Certified Technicians to join our team. If you are tired of where you work and want to work in a clean and safe environment, come and see what we have to offer. We are looking for certified technicians to join our team. We provide an excellent working environment and temperature-controlled shop. Come work for the best! If you are interested in a career in the automotive business we welcome you to apply today to join our family at Morgan Automotive. We welcome you to apply for a position where you can contribute to our goal of providing an extraordinary automotive experience to all of our clients. At Morgan, we set each member up for success by providing comprehensive, highly-specialized training for each position within our organization, complete with on-the-job training and ongoing personal development. Benefits Medical, Dental & Vision Insurance Optional Life Insurance AFLAC Legal Shield Short Term Disability 401K w/ Match Money Paid Personal Days Paid Vacation Yearly Awards Banquets Yearly Holiday Dinners Employee of the Month/Year 20 Years of Service Rolex Watch Monthly Pep Rally w/ Raffle Prize Responsibilities Perform work specified on the repair order with efficiency and in accordance with dealership Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Providing an estimate of time needed for additional repairs Executing repairs under warranty to manufacturer specifications Qualifications B level qualifications, including Diagnostic, Electrical and Engine Repair Must have dealership experience Certifications from other brands may be used as equivalency with Hyundai Must hold a high school diploma or equivalent Excellent customer service skills Basic Computer skills Positive, friendly attitude, along with a customer service mentality Enjoy working in a fast paced environment Team player Must have a valid driver's license Must be able to pass a drug test Ability to learn new technology, repair and service procedures and specifications Able to operate electronic diagnostic equipment

Job DescriptionJob Title: Class C MECHANIC Division/Department: MAINTENANCE Reports To: Director of Maintenance ESSENTIAL DUTIES AND RESPONSIBILITIES All new mechanics are hired directly into a Class C Mechanic position. A Class C mechanic shall with minimum supervision satisfactorily and safely perform inspections and simple repairs to company transit fleet and/or equipment as assigned by a supervisor. Perform preventative maintenance inspections of company transit fleet to include routine servicing such as oil and filter changes and lubrication. Ability to accurately diagnose and repair applicable engines, transmissions, drive-line, rear-ends, steering and air brake systems, suspension, electrical, lighting systems and wheelchair lifts. Perform repairs on heating, ventilating and air conditioning systems with supervision. Perform comprehensive preventative maintenance procedures and maintain records and logs on company transit vehicle and other vehicles. Required to work and/or assist with road calls and pulls off as needed. Ensure all required duty checklists are completed and accurate in compliance with company policy Performs other related duties as assigned by Supervisor Maintain compliance with all company policies and procedures SKILLS AND ABILITIES Skilled in the repair and replacement of broken, defective parts on diesel powered drive trains. Ability to lubricate and clean vehicle parts when necessary. Ability to replace and adjust headlights, and install and repair automotive accessories such as mirrors and windshield wipers. Ability to properly identify and use standard mechanical tools and equipment. Ability to properly use and identify both gas and electrical welding equipment. Ability to safely operate a hydraulic lift, forklift, and other machinery required to complete needed mechanical repair work and maintenance. Ability to competently read and interpret vehicle and equipment service manuals. REQUIRED QUALIFICATIONS High school diploma or equivalent MUST have valid Drivers License with the ability to obtain a Commercial Drivers License with Passenger Endorsement within 120 days of employment. MUST have a complete set of mechanic tools. MUST be available to work varying shifts to include days, nights, weekends and holidays. MUST be able to pass physical agility tests with no limitations on upper or lower back. MUST be able to walk, stoop, kneel, bend, push and/or pull to complete moderate to heavy lifting when necessary to perform the essential functions of the position. Ability to work in varying weather conditions. Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices within 60 days of employment. DESIRED QUALIFICATIONS Knowledge of transit bus and/or automotive systems (I.e. mechanical, electrical, air conditioning, pneumatic, hydraulic, or other systems) Knowledge of compressed natural gas and cleaning solvents. IMPORTANT INFORMATION All positions are Safety Sensitive and subject to pre-employment requirements to include: drug test, background check, and clean driving record. Eligible applicants will have no more than two (2) moving violations in the past five years and no convictions of a serious traffic violation (i.e., DWI, driving with a suspended, canceled or revoked license) in the past five years. SporTran is an Equal Opportunity Employer. SporTran provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SporTran complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation and training.

POWER UP YOUR CAREER WITH LOUISIANA CAT Louisiana Cat has been proud to represent Caterpillar for 4 continuous generations in the state of Louisiana. We have been providing our customers with the highest quality Cat equipment, service, and parts since 1933. We serve to build and power our community for a better future. We are always searching for high energy, ambitious candidates who are ready to join our team. You can build your future here! THE OPPORTUNITY We are looking for a HEAVY EQUIPMENT TECHNICIAN to join our growing operations at our Bossier City, Louisiana location. YEARLY POTENTIAL $60,000 - $120,000 yearly The yearly range indicated is representative of the hourly rate, including typical overtime. This range is based on a technician's experience, skills, education and training. For technicians, overtime is typically calculated on a daily basis after 8 hours worked. YOU The person in this role will be responsible for servicing and repairing Caterpillar heavy equipment and/or engines at our shop or onsite at customer locations. YOUR CONTRIBUTION You will diagnose, troubleshoot, repair and perform preventative maintenance on all component of heavy equipment such as electrical codes, engines, fuel systems, hydraulics, power generation and power trains You will be responsible for removal and installation of heavy equipment engine components according to Caterpillar standards and technical service manuals You will understand Caterpillar exchange parts process and financial cost analysis of repairs for our customers You will create, track and formalize work order documents on our Caterpillar customer service report software systems YOUR VALUE You will promote positive customer service according to Caterpillar and Louisiana Cat expectations You will have the tools and building blocks to MAKE A CAREER here at Louisiana Cat. In walk through our Louisiana Cat doors...are the finest Caterpillar Heavy Equipment Service Technicians in the South. MOST IMPORTANT QUALIFICATIONS REQUIRED: High School Diploma or (GED) equivalent REQUIRED: Prior technical training of heavy machinery / equipment REQUIRED: Strong mechanical aptitude Must own required tool inventory. Louisiana Cat offers exclusive Tooling Program (specific discussed during interviews) Strong customer service skills, mechanical aptitude, professional demeanor and always "safety-first" mentality every hour of every day JOB FACTS WORK SHIFT: 12 hour days / some weekend; variety of shifts (specifics will be discussed during interviews) Will require physical movement LOUISIANA CAT BENEFITS Health, Dental, Vision, $50,000 Company Funded Life Policy (if enrolled in Health) Short- and Long-Term Disability Insurance Voluntary Accident, Critical Illness, Hospital Indemnity, Cancer, Supplemental Life and additional voluntary policies 401K Plan with Company Match Paid Holidays & Vacation Technician Tool Loan Program up to $2,000 Safety Boot / Safety Prescription Glasses Allowances Employee Discounts Credit Union Technician Career Development Program - Shop & Field Service Training SAFETY IN ALL WE DO We require strict compliance with PPE (personal protective equipment) safety regulations. We maintain compliance with all Federal, State and Local safety and company regulations. All employees must follow all Company Health, Safety & Environmental (HSE) procedures. Louisiana Cat is a drug-free workplace, including marijuana and THC products. WHY PEOPLE JOIN LOUISIANA CAT We are dedicated to fostering a safe and meaningful work environment that empowers our employees and customers. We are known for creating lasting partnerships, guided by our strong company values, customer experience culture and safety standards. We are committed to the long-term growth and success of both our employees and customers. We have energy, focus and passion delivering results because what we do impacts our customers each and every day. We work across Construction, Electrical Power, Industrial, Marine Engines and Oil & Gas industries. We invest in training and development programs for our employees to build their toolkit and career paths here at Louisiana Cat. We offer competitive pay and benefits, paid holidays and vacation, employee incentive programs and 401(k) company match programs. WHO WE ARE We are a growing organization focused on creating a positive impact on our employees, customers and communities in which we operate. We seek out employees who are inspired by our values, thrive in a collaborative environment, and want to become a part of a dynamic company backed by 90+ years of success. We have 23 locations across Louisiana and the Gulf South with Corporate HQ located in Reserve, LA and Power Systems HQ located in New Iberia, LA. ADDITIONAL INFORMATION Louisiana Cat (Louisiana Machinery Co, LLC) and its affiliates are an Equal Opportunity Employer (EEO). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age (40 and over), national origin, disability, or status as a protected veteran. We proudly hire U.S. Veterans. Louisiana Cat (Louisiana Machinery Co., LLC) uses E-Verify and complies with I-9 employment eligibility requirements of all new hires. Click here for your rights: click here for more information Equal Employment Opportunity Know Your Rights: Workplace Discrimination is Illegal: click here for more information Pay Transparency Nondiscrimination Provision: click here for more information Louisiana Cat (Louisiana Machinery Co, LLC) and its affiliates are drug-free workplaces and post-offer, pre-employment process includes background check, drug/alcohol screen, and if applicable for the role, pre-employment physical/fit for duty assessments. Salary Description $ 60,000 - $120,000

Service Technician - Automotive We run an honest shop and need honest, hard-working techs. To be a success at our dealership, you need to have solid skills and solid ethics. We also know that to keep a good service tech, a dealership has to treat them right by paying them well and offering room for learning and advancement. Here, you'll work alongside some of the best in the business and make great money while doing it. If you love diagnosing and repairing vehicles while maintaining a positive attitude, then let's talk! Job Responsibilities Examine and diagnose vehicles Discuss repairs with shop foreman or service advisor Communicate additional service requests to service advisor Plan work in cooperation with shop foreman Provide labor estimates to service advisor Monitor repair time and update service advisor Maintain strict adherence to dealership policies on vehicle care and operation Complete story and/or documentation for client repairs Assist in mentoring technician trainees Attend company and factory training Keep current with factory technical bulletins Understand and follow federal, state and local regulations (such as disposal of hazardous waste) Education and/or Experience High school diploma or GED (general equivalency diploma); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience. Certificates, Licenses, Registrations Operator Driver's License & State Inspection License Compensation Compensation is based on experience and commensurate with Fortune 500 companies. Benefits Offered Medical Dental Vision 401(k) Basic Life Insurance Accident & Critical Illness Insurance Paid Training Short Term Disability Employee Discount Program About Us Family Car Group is a reputable, well-established, family-owned, and operated auto dealership group with a strong presence in our community. Our dealerships are dedicated to providing an amazing car-buying experience and provide a large selection of high-quality vehicles. Our goal is to dramatically enhance the car buying and servicing experience for our customers by building relationships based on mutual respect and complete transparency. Family Car Group is interested in finding talented individuals who are looking for a rewarding and challenging career in the automotive industry. We offer an excellent benefit package and a great working environment with many different employment opportunities ranging from sales to service to management. If you want to set yourself apart from the ordinary routine of the average job, possess the unique ability to consistently provide outstanding customer service, and have a dedication to excellence. Apply today!

Looking for high performance automotive techs that can join our winning team and grow! Are you interested in a rewarding career with great pay, outstanding benefits and the opportunity to grow? We are looking for experienced Automotive Technicians to join our winning team at Bossier City Dodge Chrysler Jeep Ram. A large Dodge Chrysler Jeep location that is rapidly growing. At Bossier City Dodge Chrysler Jeep Ram our employees are our most valuable resource and growth is encouraged through teamwork and creativity, come join our winning TEAM! Relocation assistance and sign on bonuses are available for the right candidate. We offer great benefits, with a size-able portion of medical paid by the company . Our benefits include: · Medical · Dental · Vision · Disability · Life Insurance · Accident · Critical Illness · 401k Plan, with no waiting period you can enroll immediately. (We also have a Match program!) · PTO Job Type: Full-time Essential Duties and Responsibilities Properly complete the service and/or repairs for which the technician is trained as assigned by management or their designated representative. Complete all work according to the applicable safety requirements and published procedures. Maintain an inventory of normal mechanical tools to include screwdrivers, wrenches, socket wrenches, pliers, hammers, chisels and punches and other tools needed to perform the work for which the technician is trained and not normally inventoried by the service department as "special tools". Properly use the special tools and equipment provided by the service department. Participate in and utilize technical training as assigned by management. Participates in manufacturer-sponsored training programs, schools, and events. Produce quality work that evidences pride of workmanship. Documents all work performed and recommended on the repair order. Maintain the work space assigned in an organized and cleanly manner. Ensure that customer vehicles are returned to them as clean as they were prior to being serviced. Maintain personal grooming, hygiene and uniform standards according to departmental policy. Make every effort to achieve the production objectives set by management. Review the technical bulletins and other publications as assigned by management. Provide the administrative assistance necessary to complete warranty repair orders and other tasks assigned by management. Use shop supplies and materials in a practical and economical manner. Constructively communicate with other dealership personnel as required to satisfy customer needs. Report to management any situation or condition that would jeopardize the safety, welfare, or integrity of the dealership, its customers or employees. Road tests vehicles when required or refers to the test technician. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. The individual must maintain an acceptable driving record according to our insurance standards at all times. No employee or applicant should be under the influence of any substance including medical marijuana on-site or during work hours. Further, employees under the influence of are prohibited from undertaking any task that would constitute negligence or professional malpractice, and are prohibited from operating any type of powered vehicle or powered equipment - handheld or otherwise.

CarGuys Inc. -America's #1 Automotive Recruiter If you are looking for a new career in the car Biz CarGuys Inc. is the go-to company to assist you. We work with dealerships that are looking to hire, all across the country. Anytime you are looking to find a new career…contact us, CarGuys Inc. to assist. We help dealers to hire, from porters all the way up to CEO's . Currently we have a dealership in your area looking to hire Automotive Diesel Technicians If you are a top performer, excel at being a Diesel Technician then we have a state-of-the-art dealership looking for you. Key Responsibilities: Perform routine maintenance tasks such as oil changes, filter replacements, and fluid checks to keep diesel engines running smoothly. Diagnose mechanical and electrical issues using diagnostic tools and equipment. Conduct thorough inspections to identify problems and provide accurate repair recommendations. Repair and replace defective parts, components, or systems, ensuring compliance with manufacturer specifications. Perform engine overhauls, transmission repairs, and other complex diesel engine repairs with precision and efficiency. Adhere to safety protocols and regulations to maintain a safe working environment for yourself and your colleagues. Key Requirements: Proven experience as a Diesel Technician, with expertise in diagnosing and repairing diesel engines. Strong mechanical aptitude and troubleshooting skills. Proficiency in using diagnostic tools and equipment. Familiarity with diesel engine systems, components, and technology. Ability to work independently and as part of a team in a fast-paced environment. Excellent attention to detail and commitment to quality workmanship. Why Join Us: Competitive salary and benefits package. Opportunities for career advancement and professional development. Supportive work environment with a focus on collaboration and teamwork. Cutting-edge technology and resources to enhance your skills and expertise. Join a reputable company with a strong reputation for quality service and customer satisfaction. If you are a skilled Diesel Technician looking for a rewarding career opportunity, we want to hear from you! Apply now and take the next step towards advancing your career in the automotive industry. Keywords:Diesel Technician, Diesel Mechanic, Engine Repair, Diagnostic Skills, Troubleshooting, Maintenance, Engine Overhaul, Transmission Repair, Fuel Systems, Electrical Systems, Technical Expertise, Mechanical Aptitude, Precision Work, Team Player, Safety Protocols, Compliance, Quality Assurance, Certification, Tool Proficiency, Problem-Solving Skills, automotive repair, automotive technician, diesel mechanic, certified technician, master technician, master tech, certified tech, ASE certified, Diesel Certified, *You are applying through Car Guy's Inc, America's and Canada's #1 Automotive Recruiter. Companies all over America and Canada hire us to find them qualified candidates. If deemed a qualified candidate your resume will be forwarded to a local dealer.

Job DescriptionBenefits: 401(k) Company parties Competitive salary Dental insurance Flexible schedule Free uniforms 401(k) matching Employee discounts Health insurance Opportunity for advancement Tuition assistance Vision insurance Join Our Team as a Mechanic at Holiday Lanes Bowling Center! Are you ready to roll into an exciting new career? Holiday Lanes Bowling Center is on the hunt for a skilled and enthusiastic Mechanic to keep our bowling lanes and equipment in tip-top shape. If you have a passion for all things mechanical and love being part of a fun, vibrant team, we want to hear from you! We operate 38 lanes using Brunswick SYNC and GS-X series pinsetters. Please check out this youtube video for more information on our machines. ******************************************* What You'll Do: - Maintain and repair bowling lane machinery to ensure smooth and enjoyable bowling experiences for our guests. - Dive into the nitty-gritty of mechanical systems, diagnosing issues and performing repairs like a pro. - Collaborate with our friendly staff to ensure the best possible experience for our bowlers. - Ensure all equipment is safe and up to code, keeping our lanes ready for action. What Were Looking For: - Experience in mechanical maintenance, electrical systems, or a related field is preferred. - A knack for diagnosing problems and finding effective solutions. - A fun-loving spirit and a desire to contribute to a lively atmosphere. - Willingness to work evenings and weekends, because thats when the strikes happen! Perks of the Job: - Enjoy discounted bowling and food at our center! - Be part of a close-knit team that values camaraderie and fun. - Were all about helping you grow your skills and advance in your career. How to Apply: If youre ready to roll with us, send your resume and a brief note about why youd be the perfect fit to ************************** Join us at Holiday Lanes Bowling Center, where every day is a strike of fun! Get your game face on and apply today!

Gladiator Energy is on a mission to expand our team with individuals motivated in a fast-paced environment, eliminating inefficiencies on location, promoting personal and professional career growth, establishing safety protocols, coupled with high-level rewards. Gladiator Energy is dedicated to our core values: Communication, Responsiveness, Quality Work, and Respect. With relentless execution of teamwork between leadership and personnel, our mission to be a leading service provider against our competitors in the global energy industry is possible. Gladiator Energy is an equal opportunity employer and considers all applicants without regard to race, color, religion, national origin, ancestry, citizenship, sex, pregnancy, age, physical or mental disability, genetic information, services in the uniformed services, or any other basis protected by federal, state, or local law.

Martin offers many benefits such as health, dental, and vision insurance, retirement plans, paid vacation, and much more. Insure MTI's maintenance operation will function as follows: 1. Ensure all equipment is maintained and repaired in a safe and economical manner. 2. MTI operates according to state, federal, and local regulations. 3. MTI meets customer requirements. 4. Maximize utilization of mechanics and equipment. 5. Employees follow company policies and procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES 1. Ensure all equipment is maintained by Martin policies and procedures. 2. Ensure all write-ups are repaired daily. 3. Ensure preventive maintenance is preformed daily. 4. Coordinate with terminal supervisor, shop foreman, and the safety department. 5. Train and cross-train in all areas of shop. 6. Complete duties as assigned by the terminal supervisor and/or the shop foreman. 7. Maintain a clean and safe workplace. RESPONSIBILITIES: A.PROFESSIONAL CONDUCT: A mechanic will demonstrate professional attitudes and conduct by: 1. Performing assigned duties in a professional and timely manner in the conduct of business with company personnel, customers, and the general public by adhering to and following policies and procedures in relation to: Appearance and attitude; Good communication, good relations, and courtesy with company personnel, customers, and the general public; Good time management; Company loyalty, pride, and teamwork. 2. Set a positive example for employees. Be punctual, and report for duty in a rested and alert, condition. 3. Follow company policies, company procedures, Federal, State, and Local rules and regulations and ensure company employees do the same. Make sure all employees operate in a safe manner. Report all unsafe conditions to the safety department, shop foreman, and Terminal Manager. Report all accidents and/or injuries to safety, claims, and the Terminal Manager. 4. Look out for the companies' best interest, and run the operation in an economical manner. 5. Keep the Terminal Manager and the shop foreman up-to-date on current issues, operations, and employee issues. 6. Keep the terminal manager and shop foreman up-to-date on equipment concerns. 7. Follow Instructions as set forth by the shop foreman and terminal manager. 8. MTI mechanics are not allowed to work on Lease Owner Operators trucks. 9. Strive to make MTI "The Best in the Business". Job Requirements High School Diploma or equivalency and three years work experience as a mechanic. Should have the ability to diagnose mechanical problems and make repairs. Knowledge of standard materials, tools and equipment and skill in the use and care of tools

At DT Midstream, we've got the energy to achieve great things! DT Midstream owns and operates a diverse, integrated portfolio of midstream pipeline, storage and gathering assets, allowing us to provide a comprehensive set of midstream services to our customers across the Southern, Northeastern and Midwestern United States and into Canada. Our newly independent public company is an energy industry leader with more than 20 years of proven success as part of DTE Energy and our focus is to be safe, caring, dependable and efficient in all we do. Job Summary Performs all maintenance functions necessary to maintain all operating and service equipment using standard and specialized tools and equipment including mobile equipment as required. Operates equipment in conjunction with repairs and provides assistance in operating functions as necessary to maintain continuity of operations. May work alone, with minimal supervision or with other technicians and coordinates and works in conjunction with operating team members in the performance of maintenance tasks. Key Accountabilities Maintains various types of machinery. Responsible for participating in safety activities to meet or exceed organizational goals and expectations. Maintains interpersonal relationships with individuals both external and internal to the organization. Be an active participant of developing and maintaining a culture of professionalism. Responsible for following all rules, policies, or expectations. Responsible for environmental compliance. Performs all other related duties as assigned. Minimum Education & Experience Requirements A high school diploma or GED, with a minimum of three years of maintenance experience Must have experience in the mechanical field relating to minor repairs all the way to total major rebuilds on systems and related equipment Possess and maintain a valid driver's license Other Qualifications Strong safety experience Ability to start and stop all equipment Able to lead team through major maintenance activities Assist in developing Gas Handling procedure Ability to schedule PM and ensure necessary parts and supplies are available Use experience to recommend compressor configurations for operational optimization Complete CAT Engine Training Complete Ariel Mechanic Training Recommend improvements for operational efficiency Interact and provide support to Engineering and Project management on designs Assist and implement Continuous Improvement and recommend changes for operational efficiencies Leads projects and upgrades Ability to work in a team oriented atmosphere Demonstrated capability to achieve results through people, technology and processing equipment Good knowledge of the assigned area(s) of responsibility Ability to function within a matrix organization where employees report to both a functional leader and a business leader Ability to develop and maintain productive relationships with both a functional and business leader Must be goal oriented Ability to establish and maintain effective working relationships with supervisor, coworkers, and management Physical Demands The physical demands characterized here epitomize those that must be met by an employee to properly perform the integral functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. In order to properly perform the integral functions of this job, the employee is frequently required to stand or walk and sit. Frequently, the employee is required to climb or balance and stoop, kneel, crouch or occasionally, crawl. It is crucial to the outcome of job tasks that the employee is able to: talk or hear; use hands to finger, handle or feel; and constantly reach with hands and arms. The employee in this classification will be required to lift objects of up to 50 pounds in weight. Carry objects of up to 35 pounds in weight. Occasionally the employee will have to push or pull objects 70 pounds in weight. Vision requirements for this position include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Working Conditions While performing the duties of this job, the employee is frequently exposed to outside weather conditions, including wet and/or humid conditions, and extreme heat and cold. The employee is occasionally exposed to fumes and frequently exposed to airborne particles and vibration. The employee is frequently exposed to mechanical and electrical hazards. The noise level in the work environment is moderate to loud.

Mechanic I is responsible for the service, maintenance, and repair of the area's equipment, including compressors and motors. At times this can be a very physically demanding position. This position will work around and on rotating equipment and facilities with high pressure. Responsibilities Independently diagnose engine/compressor failures accurately and efficiently. Complete accurate and timely rebuilds/overhauls of compressors, engines and controls on gas compressor packages in the field in adverse conditions without supervision. Responsible for accurately completing basic engine tuning functions to adjust engine performance and emissions on multiple major OEM's. (CAT/Waukesha) perform mechanical inspection using micrometers, pressure gauges, electronic diagnostic equipment, and other specialty tools with little to no guidance. independently assist installation of new units including commissioning and start-up inspections without supervision accurately. Responsible for submitting accurate field service reports, expense reports, timesheets, and other necessary paperwork daily. Responsible for performance of the job activities in a manner consistent with the project goals and objectives. All duties and responsibilities could include travel at short notice including nights, weekends, and holidays. Must recognize and comply with Health, Safety and Environmental rules and policies that are applicable to each location. Other Duties assigned by supervisor. Always represents the company in a professional manner. Performs all duties required for which the employee is qualified and trained. Requirements Must have applicable experience Experience with 3500/3600 CAT Ariel packages High school diploma or general education degree (GED) and some vocational/technical related experience preferred Possess knowledge and ability to diagnose engine/compressor failures accurately and efficiently with limited guidance. Possess knowledge and ability to respond and repair recurring problems and emergency services as needed independently. Must be able to be on a call-out rotation and effectively make emergency repairs. Goal driven/forward thinking Competency with Microsoft Office programs Physical Demands and Exposures Work is regularly performed in outside weather conditions, including rain and extreme cold and heat, near moving mechanical parts; exposure to high wind, ice, snow, wet and/or humid conditions, vibration, and dust is expected. Exposure to noise levels requiring the use of hearing protection

Job Description COMPANY WC Welding is an Oil & Gas industry service provider. We offer a wide array of services throughout the Appalachian Basin including Welding & Fabrication, Compression & Facility Operations, Hydrotesting Services, Well Hookups, Compressor Installations, Facility Maintenance, and more. We have over 10+ years of experience in the industry and are aimed at superior quality results with high emphasis on achieving safety excellence. WC Welding is a drug-free environment and all candidates will be subject to pre-employment drug testing, background and motor vehicle (MVR) checks as well as random drug testing. WC Welding is currently seeking qualified applicants for the below listed position(s): OILFIELD MECHANIC: *Payrate is dependent upon experience* Responsibilities will include: Responsible for performing preventative and corrective maintenance / repairs on all company assets Comply with all safety regulations, company policies, and procedures, ensuring a safe working environment Able to perform work on gas & diesel engines for heavy equipment and light duty trucks and trailers, as well as gas compressors and pumps in the oilfield EXPERIENCE & QUALIFICATIONS: Excellent Mechanical Aptitude Highly motivated self-starter able to work with little supervision Desire and willingness to learn Knowledge of oilfield equipment BENEFITS: Medical, Dental, Vision Insurance Coverage (effective 30 days post hire date) Company 401K program after 1 year Site Level Training & Mentorship Program Annual Review & Advancement Opportunities WC Welding is an equal opportunity employer. To learn more about our operations and opportunities within please visit our website at ***************** Powered by JazzHR 5psJVBK6zC