Diesel technician jobs in Coral Gables, FL

The primary purpose of the Tech III, MHE position is to oversee and repair material handling equipment (MHE). This role will oversee the safe operation, repairs, and preventative maintenance of MHE equipment including electric and propane industrial forklifts, pallet jacks, hi-low lifts, scissor lifts, scrubbers/sweepers, battery charging stations and cars, batteries, etc. Provide assistance to Supervisor/Manager of Maintenance to ensure assets are managed in accordance with the following: Equipment/parts manufacturers, equipment/parts suppliers, EPA, OSHA and applicable State and Local Codes. Job Description + Benefits start on day one! + Schedule: Monday-Friday 8am-4:30pm (weekends as needed) + Compensation: $27-$34/hour + Check out a day in the life here: *********************************** You will contribute by: + Oversee and manage the repair of the MHE fleet including monitoring and trending, troubleshooting and repairs and preventative maintenance. + Conducting preventive maintenance (P.M.'s) within manufacturer's guidelines/specifications and established timelines to include oil changes, filter changes, calibration of equipment, belts changes, inspections, adjustments, lubrication, etc. + Concise reporting of required inspections, evaluations, P.M. procedures, etc. and clear communication with Management, etc. + Responsible for logging time and materials into computerized maintenance management system (CMMS) on a daily basis in the form of repairs, P.M.s, etc. + Responsible for daily communication of all pertinent information regarding equipment operation and maintenance to departmental management and other maintenance teams. + Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. + Required to interpret and understand plans and specifications, schematics, operating and maintenance manuals, etc. for all systems being overseen. + Assist manager/supervisor in developing standard operating procedures, daily work schedules, and duty cycles for all repairs and maintenance for MHE and battery equipment. Assist in managing outside battery, MHE, and electrical contractors conducting service, repair and new contract work. + Assist management in creation of budgets for individual projects, yearly capital and yearly operating expenses. + This position will also assist the battery technicians. Duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, and other general maintenance activities. + This position will also assist the building and refrigeration maintenance teams. Duties will include assisting in general building repairs, electrical troubleshooting and repairs, refrigeration systems repair and maintenance, and other general maintenance activities. Environment + Warehouse: Grocery Warehouse (50F to 90F) + Warehouse: Perishable Warehouse (28F to 60F) Skills + Extensive experience with Crown, Raymond, and Toyota material. Manufacturer Certifications (Raymond, Crown, Toyota, etc.) handling equipment. + Detailed knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC systems, drive motors, power amps, electrical controls including PLC systems. + Detailed knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, internal combustion motors, telescopic masts, reach mechanisms, steering systems, suspension systems, etc. + Building and HVAC: General knowledge of building (Dock doors and plates, electrical, HVAC systems, etc.) systems. + CMMS: Computerized Maintenance Management System experience for logging work orders and P.M.s + Hydraulic systems, Electronic Systems, PLC/Low Voltage Control Systems + Physical abilities: Some travel, site inspections, equipment inspections, mechanical repairs and replacements, all which require good mobility, physical exertion, walking, bending, reaching, climbing ladders, carrying tools and parts, etc. + OSHA, ASE Certifications (Electrical, Mechanical, Braking Systems, etc.) + Although this position states no travel required, there may be times when support is needed at other facilities and travel may be asked of the associate. Years Of Experience + 2-5 years: Relevant experience. + 4 years: MHE Maintenance Position. We Offer + Benefits available from day 1 (medical, dental, vision) + Company Matched 401-k + Paid training + Weekly Pay + PTO and Holiday Pay offered + Career Progression Opportunities + Tuition Reimbursement + Employee Health & Wellness program + Employee Discounts / Purchasing programs + Employee Assistance Program + C&S Offers $100 towards the purchase of safety shoes Every person matters. We keep our values alive through a culture that embraces differences and ensures that every person matters. The Fine Print This Job advertisement does not constitute a promise or guarantee of employment. This job advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of C&S Wholesale Grocers. Qualifications KPIs, Safety & Sanitiation, Technical Certification - Electrical Engineering Technology, Training & Development, Values & Teamwork, Warranty Shift 1st Shift (United States of America) Company C&S Wholesale Services, LLC About Our Company C&S Wholesale Services is one of many companies within the C&S Family of Companies, the largest wholesale grocery supply company in the U.S. and the industry leader in supply chain innovation. At C&S, We Select the Best & those with the motivation, pride, and drive to succeed in our fast-paced world. Working Safely is a Condition for Employment with C&S Wholesale Services, Inc. C&S Wholesale Services, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. The Company provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Company: C&S Wholesale Services, LLC Job Area: Facilities - Maint Job Family: Facilities Job Type: Regular Job Code: JC0987 ReqID: R-265480

Coke Florida is looking for a Fleet Technician based out of our Miami location. We're currently looking for 11:00AM to 7:30PM, working Tuesday through Friday AND 4:00AM to 12:30PM on Saturday. What You Will Do: As a Coke Florida Fleet Technician, you will be responsible for scheduling and performing mechanical repairs and preventative maintenance on all company fleet vehicles. Roles and Responsibilities: Perform mechanical repairs and preventative maintenance on all company fleet vehicles Troubleshoot, diagnose and complete repairs on all types of vehicles Perform preventative maintenance in fleet Respond to service calls Maintain tools and clean work area Pick up and deliver vehicles For this role, you will need: Minimum of 1 year of mechanic experience on light and heavy equipment Experience with heavy duty and PIT equipment Excellent demonstrated mechanical and technical aptitude May be required to supply automotive hand tools (not including heavy duty or diagnostic tools) Must have a driving record with no major moving violations in the last three (3) years* * Major moving violations include, but are not limited to, leaving the scene of an accident, driving under the influence, and reckless driving. Minor moving violations include, but are not limited to, speeding, driving too close, failure to stop, and improper lane changes. Driving records, including minor moving violations, will be evaluated according to Coke Florida guidelines to determine eligibility for the Fleet Mechanic position. Additional qualifications that will make you successful in this role: 3+ years journeyman mechanic experience highly preferred Gasoline, diesel and propane vehicle experience preferred ASE certification and CDL license or certification strongly preferred

Are you ready to wrench with a mechanically savvy team with leadership that cares and wants you to succeed? Bring your tools to the fastest growing fleet maintenance network in the country. Come join Fleet Mobile Maintenance, where we have cutting-edge technology that reduces your admin time - so you can focus less on paperwork and more on doing what you love. We are a locally run, family-oriented, proudly serving your community, and are looking for talented technicians like you to grow with us! *Can Earn An Additional $300 Weekly With Efficiency Bonuses* *If you are an experienced Trailer Tech for Class 8, please apply. If you are a technician who can do both Trailer and Diesel, please apply* Responsibilities WHAT YOU'LL DO Troubleshoot, diagnose, and repair our customers Commercial Tractors and Trailers. Writing detailed work orders - working Mobile Road Calls and/or In Yard. Provide quality customer service Inspecting, troubleshooting, and repairing semi-truck and trailer bodies, systems, and components Performing preventative maintenance measures on fleet semi-trucks and trailers Maintaining hubs and axles and adjusting or replacing them when required Inspecting, servicing, and replacing tractor and trailer parts, including tires Checking and repairing the brake, electrical, and hydraulic system Testing all systems and equipment for performance issues Ensuring that trailers meet the U.S. Department of Transportation's road safety requirements. Compiling inspection reports, documenting repairs, and reporting all findings to management. Responding as soon as possible to client queries. Qualifications WHAT YOU'LL NEED TO HAVE: 5+ years of verified experience of Commercial Tractor and Trailer repair experience. Valid Driver's License with acceptable driving record. Ability to lift 100+ pounds. Basic Computer Skills to submit repairs for billing. Follow oral and written instructions to complete daily tasks. Basic reading and writing skills to complete customer repair orders. WHAT WILL HELP YOU STAND OUT: Experience with welding, certification a plus. High School Diploma or equivalent, Technical school degree, a plus. Class A CDL. Your own tools Benefits WHAT WE OFFER YOU: M-F Schedule with voluntary on- call. Paid Time Off including holidays. Time and a half for any afterhours (OT) work/+$100 bonus. (Voluntary) 401(k) with company match after 90 days of employment. Medical and Dental Plans available on day one. Vision Plan. Disability & Life Insurance. Accident, critical illness, and hospital indemnity. Employee assistance program. Family oriented company that believes in a true work/life balance. Experienced team you can learn from. Opportunities for growth in partner businesses nationwide. Company provided uniforms. Epika Fleet Services, Inc. is an equal opportunity, affirmative action employer, and is committed to providing employment opportunities to all qualified applicants without regard to race, sex, age, color, national origin, ethnicity, creed, religion, disability, genetic information, sexual orientation, gender, gender identity and expression, marital status, pregnancy, or veteran status. About the Brand Fleet Mobile Maintenance (FMM) service offerings include mobile preventative maintenance and mechanical repair, tire replacement and repair services, and trailer repair and maintenance services. Fleet Mobile Maintenance serves several markets in the Southeast corridor of Michigan, including Detroit, Ann Arbor, Battle Creek, Lansing, and Flint. We also have technicians serving customers in Indianapolis, Cleveland, Louisville, and Nashville. We are a passionate team who strive to be the best service providers in the country. We do this by following two simple ideals, following DOT standards and putting customers' needs first. Our on-site service comes to you, so there is no need for costly downtime, waiting, and moving equipment around. We focus on building long-term relationships with every one of our customers by keeping their equipment safe, compliant, rolling, and on time! The Company Epika is a network of mobile and in-shop preventative maintenance service centers focused on commercial fleets across the country. Our company was built by partnering with and investing in the best-of-the-best in every market we serve and partnering with private equity firm Ares. For more information, visit ******************* Pay Range USD $28.00 - USD $40.00 /Hr.

Are you ready to wrench with a mechanically savvy team with leadership that cares and wants you to succeed? Bring your tools to the fastest growing fleet maintenance network in the country. Come join Fleet Mobile Maintenance, where we have cutting-edge technology that reduces your admin time - so you can focus less on paperwork and more on doing what you love. We are a locally run, family-oriented, proudly serving your community, and are looking for talented technicians like you to grow with us! *Can Earn An Additional $300 Weekly With Efficiency Bonuses* *If you are an experienced Trailer Tech for Class 8, please apply. If you are a technician who can do both Trailer and Diesel, please apply* Responsibilities WHAT YOU'LL DO Troubleshoot, diagnose, and repair our customers Commercial Tractors and Trailers. Writing detailed work orders - working Mobile Road Calls and/or In Yard. Provide quality customer service Inspecting, troubleshooting, and repairing semi-truck and trailer bodies, systems, and components Performing preventative maintenance measures on fleet semi-trucks and trailers Maintaining hubs and axles and adjusting or replacing them when required Inspecting, servicing, and replacing tractor and trailer parts, including tires Checking and repairing the brake, electrical, and hydraulic system Testing all systems and equipment for performance issues Ensuring that trailers meet the U.S. Department of Transportation's road safety requirements. Compiling inspection reports, documenting repairs, and reporting all findings to management. Responding as soon as possible to client queries. Qualifications WHAT YOU'LL NEED TO HAVE: 5+ years of verified experience of Commercial Tractor and Trailer repair experience. Valid Driver's License with acceptable driving record. Ability to lift 100+ pounds. Basic Computer Skills to submit repairs for billing. Follow oral and written instructions to complete daily tasks. Basic reading and writing skills to complete customer repair orders. WHAT WILL HELP YOU STAND OUT: Experience with welding, certification a plus. High School Diploma or equivalent, Technical school degree, a plus. Class A CDL. Your own tools Benefits WHAT WE OFFER YOU: M-F Schedule with voluntary on- call. Paid Time Off including holidays. Time and a half for any afterhours (OT) work/+$100 bonus. (Voluntary) 401(k) with company match after 90 days of employment. Medical and Dental Plans available on day one. Vision Plan. Disability & Life Insurance. Accident, critical illness, and hospital indemnity. Employee assistance program. Family oriented company that believes in a true work/life balance. Experienced team you can learn from. Opportunities for growth in partner businesses nationwide. Company provided uniforms. Epika Fleet Services, Inc. is an equal opportunity, affirmative action employer, and is committed to providing employment opportunities to all qualified applicants without regard to race, sex, age, color, national origin, ethnicity, creed, religion, disability, genetic information, sexual orientation, gender, gender identity and expression, marital status, pregnancy, or veteran status. About the Brand Fleet Mobile Maintenance (FMM) service offerings include mobile preventative maintenance and mechanical repair, tire replacement and repair services, and trailer repair and maintenance services. Fleet Mobile Maintenance serves several markets in the Southeast corridor of Michigan, including Detroit, Ann Arbor, Battle Creek, Lansing, and Flint. We also have technicians serving customers in Indianapolis, Cleveland, Louisville, and Nashville. We are a passionate team who strive to be the best service providers in the country. We do this by following two simple ideals, following DOT standards and putting customers' needs first. Our on-site service comes to you, so there is no need for costly downtime, waiting, and moving equipment around. We focus on building long-term relationships with every one of our customers by keeping their equipment safe, compliant, rolling, and on time! The Company Epika is a network of mobile and in-shop preventative maintenance service centers focused on commercial fleets across the country. Our company was built by partnering with and investing in the best-of-the-best in every market we serve and partnering with private equity firm Ares. For more information, visit ******************* Posted Salary Range USD $28.00 - USD $40.00 /Hr.

Job DescriptionAbout Us At The Pharmacy Hub, we collaborate with pharmaceutical brands, manufacturers, health brands, telemedicine providers, and healthcare companies to deliver essential products directly to patients. Our expertise allows us to seamlessly distribute pharmaceuticals, medical devices, and other healthcare products to consumers, ensuring greater accessibility and convenience. Core Values The Pharmacy Hub is dedicated to breaking barriers in healthcare by championing access, intervention and affordability. Customer-first mindset - we develop strong partnerships with telehealth platforms and healthcare companies to enhance access and understand their specific needs Innovation for intervention in care - we develop advanced compounding solutions and products to better support patient health outcomes Continuous improvement - we continuously improve our processes and offerings through intelligent, honest and transparent practices to deliver cost-effective solutions that truly benefit our clients and their patients. You will play a pivotal role in maintaining these values and contributing to the company's mission of redefining healthcare delivery through superior pharmacy services. Job Summary The Industrial Mechanic/Millwright is a journey-level professional responsible for installing, maintaining, repairing, and overhauling the complex mechanical systems and machinery critical to our mail-order pharmacy operations. This role requires a comprehensive understanding of mechanical systems to ensure minimal downtime and maximum efficiency of high-speed automation, conveyor systems, and facilities equipment. The ideal candidate is a proactive problem-solver who works safely and efficiently in a fast-paced, regulated environment. Key Responsibilities Perform complex troubleshooting, diagnostics, and repair of mechanical failures on a wide range of equipment, including packaging machinery, conveyor systems, sorters, and facilities equipment. Execute precision installation, alignment, and leveling of new machinery and equipment using laser alignment tools, levels, and precision measuring instruments. Conduct preventative maintenance (PM) and predictive maintenance tasks, including vibration analysis, thermal imaging, and oil analysis, to identify and address issues before they cause failures. Disassemble, repair, and reassemble complex mechanical components such as gearboxes, ball screws, power transmission systems, pumps, and pneumatic/hydraulic systems. Read and interpret complex mechanical, hydraulic, and pneumatic schematics, as well as engineering blueprints and layout drawings. Fabricate and modify parts and components using machining tools such as lathes, mills, and grinders, and welding equipment as needed. Rig, lift, and move heavy machinery and components safely, following all rigging and hoisting protocols. Document all work performed, parts used, and time spent accurately in the Computerized Maintenance Management System (CMMS). Collaborate with operators, electricians, and engineers to improve equipment reliability and performance. Strictly adhere to all safety standards. Qualifications High school diploma or equivalent (GED) required. Completion of a recognized Millwright or Industrial Mechanic apprenticeship program is required. A minimum of 2-5 years of experience as a Journeyman Millwright or Industrial Mechanic in an industrial, manufacturing, or distribution setting. Experience in a pharmaceutical, food, beverage, or other cGMP-regulated industry is a plus Basic English with the ability to read and write. Skills & Abilities Ability to diagnose root causes of mechanical failures and implement effective, long-term solutions. Mastery in laser shaft alignment, leveling, and setting machinery to precise tolerances. In-depth knowledge of mechanical systems, including bearings, seals, lubrication, drives, couplings, and pneumatics/hydraulics. Proficiency in machining (turning, milling, drilling) and welding (MIG, TIG, Stick) to create and repair parts. A proven track record of working safely in an industrial environment and a thorough understanding of LOTO procedures. Ability to work with minimal supervision, manage multiple priorities, and respond effectively to emergency breakdowns. What We Offer Competitive salary. Quarterly bonus program based on productivity and efficiency. Flexible scheduling options (including evenings/weekends as needed). Opportunities for growth in a rapidly expanding telepharmacy practice. Collaborative and innovative work environment focused on patient safety and compliance. Location: Fort Lauderdale, FL Shifts: DBT This is a full-time position, working 44 hours per week. This is a 100% onsite role; remote or hybrid work is not available Pay Range$25-$27 USD Benefits: 401(k) with up to 4% matching Medical, dental, vision and life insurance Paid time off Paid public holidays At The Pharmacy Hub, we don't just offer jobs-we offer opportunities for career growth and development. We take pride in our fast-paced, team-driven culture and are committed to supporting our employees in achieving success. If you're ready to join a company that values hard work, dedication, and teamwork, apply today! We look forward to welcoming you to The Pharmacy Hub and working together to deliver top-tier pharmacy fulfillment solutions.

Coke Florida is looking for a Fleet Technician based out of our Miami location. We're currently looking for 11:00AM to 7:30PM, working Tuesday through Friday AND 4:00AM to 12:30PM on Saturday. What You Will Do: As a Coke Florida Fleet Technician, you will be responsible for scheduling and performing mechanical repairs and preventative maintenance on all company fleet vehicles. Roles and Responsibilities: Perform mechanical repairs and preventative maintenance on all company fleet vehicles Troubleshoot, diagnose and complete repairs on all types of vehicles Perform preventative maintenance in fleet Respond to service calls Maintain tools and clean work area Pick up and deliver vehicles For this role, you will need: Minimum of 1 year of mechanic experience on light and heavy equipment Experience with heavy duty and PIT equipment Excellent demonstrated mechanical and technical aptitude May be required to supply automotive hand tools (not including heavy duty or diagnostic tools) Must have a driving record with no major moving violations in the last three (3) years* *Major moving violations include, but are not limited to, leaving the scene of an accident, driving under the influence, and reckless driving. Minor moving violations include, but are not limited to, speeding, driving too close, failure to stop, and improper lane changes. Driving records, including minor moving violations, will be evaluated according to Coke Florida guidelines to determine eligibility for the Fleet Mechanic position. Additional qualifications that will make you successful in this role: 3+ years journeyman mechanic experience highly preferred Gasoline, diesel and propane vehicle experience preferred ASE certification and CDL license or certification strongly preferred

About RYAM RYAM is a global leader of cellulose-based technologies, including high purity cellulose specialties, a natural polymer commonly found in filters, food, pharmaceuticals and other industrial applications. The Company also manufactures products for paper and packaging markets. With manufacturing operations in the U.S., Canada and France, RYAM employs approximately 2,500 people and generates approximately $1.4 billion of revenues. More information is available at ********************** RYAM's intellectual property and manufacturing processes have been developed over 90 years, resulting in unique properties and very high quality and consistency. RYAM is consistently ranked among the nation's top 50 exporters and delivers products to 79 ports around the world, serving customers in 20 countries across five continents. At RYAM, we're shaping the future of talent. RYAM has a specific purpose…to be the world's leading manufacturer of renewable products, including paper, packaging, and high purity cellulose. We want smart, innovative people who can find new ways to solve challenging problems. We need talented professionals across multiple disciplines who want to contribute to the company's mission and advance its vision, while also shaping its future. You will shape the future of the Fernandina maintenance department by: Repairing, installing, and rebuilding mechanical equipment throughout the mill as well as possessing personal initiative in meeting the training requirements to improve individual industrial skills specific to the RYAM Fernandina Plant. Qualified candidates will bring the following experience and skill sets: * High school diploma or GED * Three (3) years of industrial maintenance experience * Be proficient in base craft and qualified to perform all tasks associated with troubleshooting, pump installation and alignment, conveyors, drag chains, operating heavy equipment, and repairing or replacement of mill equipment. * Able to draft, read and understand mechanical drawings, machinery specifications and parts list * Functional in three (3) additional base skills (millwright, pipefitting, instrumentation, machinist, carpentry or electrical) * Knowledge of pumps, filters, grinders, gears, hydraulic systems, pipe installation and welding * Possess basic computer and handheld devices skills * Own a complete set of basic mechanical tools * Self-starter who can work safely under high-pressure situations * Experience with Predictive Technologies such as Vibration Analysis, Ultrasound equipment, and Precision Alignment preferred * SAP experience preferred Working conditions * The working conditions include an indoor non-air-conditioned industrial manufacturing and warehouse environment. Subject to temperatures that range from 65 to 90 degrees in the general working environment and hotter in certain areas of the plant. Occasional outdoor activities in hot, cold, or adverse weather. * Twenty-four hour working environment. Must be available and willing to work rotating shifts. Physical requirements * Must pass and maintain all medical and fit-testing requirements for respiratory equipment * Must be able to stand on concrete floors for an extended period, climb narrow stairs, ladders, and scaffolding. Work in confined spaces or at heights and occasionally lift up to 50 pounds during the shift. Why you will love working for RYAM: * Competitive pay, potential to earn $100,000 annually * Medical, Dental, Vision * Short term / Long term disability * Bonus / Merit * Life insurance (Company paid & Voluntary) * Company paid Employee Assistance Program (EAP) * Tuition reimbursement * Wellness reimbursement * Retirement plan EOE/Vet/Disability

JOB DESCRIPTION Job Title: MIA Station Mechanic Department: Maintenance Reports To: Outstation Line Maintenance Manager ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties and responsibilities include, but are not limited to: Conduct Terminating Service maintenance checks per the KA General Maintenance Manual at least every 50 flight hours. Accomplish all required servicing of the aircraft, including wheel and brake replacement, engine oil servicing, replacing burnt-out light bulbs, wiping down struts, etc. Troubleshoot and repair defects discovered and complete all return to service paperwork completely and on a timely basis. Forward copies of repair information to Maintenance Control as work is completed. Perform other duties as directed by the GMM, Maintenance Control, or his supervisor QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Also required is an A&P license, and previous 747 experience is desirable. Tools are required as well. EDUCATION and/or EXPERIENCE High school graduate; some college and/or technical school desirable. LANGUAGE SKILLS Ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence. Ability to give verbal and written direction to assigned staff. PHYSICAL DEMANDS The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to reach with hands and arms, stand; walk; talk or hear; and use hands and fingers to handle, feel or operate objects, tools, or controls. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move more than 50 pounds to eye level. Lift 10 pounds with each arm over your head Twist, turn with normal strength forces Climb numerous flights of stairs Work on ladders, lifts, and in some cases high elevations Work in a squatted position Work in all weather conditions WORK ENVIRONMENT The work environment characteristics described here represent those employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed primarily in construction, maintenance settings. The noise level in the work environment is usually loud. ACCOMMODATIONS: If you need reasonable accommodation for the online application due to a disability, please call **************. Please include your contact information and details about posted position of interest. Only inquiries regarding assistance for those who need accommodation with the online application process due to a disability will be returned. **Must be authorized to work in the United States.

The Crisis Center of Tampa Bay brings help, hope, and healing to people facing serious life challenges or trauma resulting from sexual assault or abuse, domestic violence, financial distress, substance abuse, medical emergency, suicidal thoughts, and emotional or situational problems. The Mechanic Apprentice performs basic maintenance, assists the Fleet Manager and the materials department with repairs, learns to use tools and diagnostic equipment, and gradually takes on more complex tasks under supervision to develop their skills and become a certified mechanic. Strategic/Transformational Duties and Responsibilities * Provides support to the Fleet Manager and the materials management department as necessary, which is essential for the success of TransCare and other services of the Crisis Center of Tampa Bay. Transactional/Administrative Duties and Responsibilities * Assist in ensuring that all fleet vehicles and equipment are properly maintained, repaired, registered, licensed, tested, and, to the extent appropriate, operated in accordance with federal, state, and local regulations, as directed by immediate supervision. * Assist Fleet Manager and Materials Management Staff with logistical support as assigned. * Assist Fleet Manager with light mechanical and electrical repairs. * Quickly responds to and diagnose/repair vehicle breakdowns in the field when requested. * Assist Fleet Manager with ordering parts, managing inventory, and keeping track of necessary supplies. * Build strong partnerships with all fleet business partners and vendors, ensuring that the services, vehicles, and equipment provided satisfy the organization's transportation and equipment needs. * Maintain a safe and clean work environment. * Participate in mandatory departmental and company meetings as required. * Adhere to all safety protocols and guidelines while working with vehicles and equipment. * Ensure compliance with all company policies and procedures (i.e. SOPs, environmental audits, shop reviews, etc.). * Completes all required paperwork and documentation neatly, correctly, and on time using Fleet Mate maintenance program and any other database software as required. * Attend continuing education and training to obtain information and data pertinent to obtain/maintain licensure. * Performs other such duties as may be required to meet the objectives of the department and the Crisis Center of Tampa Bay. Required Competencies * Cooperation/Teamwork - Works toward win/win solutions. Deals with conflict collaboratively. Discusses root causes underlying the problem. Develops effective working relationships. * Engaging Communication - Relates to people in an open, honest, sincere manner. Treats people with respect. Is friendly and approachable. Listens attentively to others. Communicates ideas clearly. Communicates appropriately with leadership and coworkers. * Customer Service (Internal & External) - Recognizes and attends to important details with accuracy and efficiency. Treats customers courteously. Responds to customer requests in a timely manner. Elicits feedback from customers to monitor their satisfaction. Considers both short and long-term interests of the customer in making service decisions. Proactively identifies customer needs. Takes responsibility to resolve customer complaints. Takes business or personal risks to serve customers' long-term interests. Creates strategies to help the organization serve customers more effectively. * Adaptability - Adapts readily to changes. Works effectively under stress. Needs minimal supervision. Comfortable working in a fast-paced environment. Is reliable, dependable and results oriented. Maintains productivity and composure under pressure. Effectively prioritizes work and establishes clear goals and plans. * Problem Solving - Views problems as opportunities to create new solutions. Anticipates potential problems and analyzes alternative solutions. * Judgment - Gathers sufficient input before making decisions. Sees interrelatedness between issues. Considers alternative solutions. Makes appropriate and timely decisions. * Valuing & Fostering Diversity - Demonstrates respect for individual differences and establishing a climate where all people can be comfortable and productive through sensitivity, empathy, and acceptance of cultural, racial, mental health, and socio-economic diversity. * Self-Management - Takes responsibility for one's behavior and well-being; Works effectively under stress and adapting one's style to changing situations; Comfortable working in a fast-paced environment and needs minimal supervision; Exhibits a professional demeanor. Education and Experience * High school diploma or equivalent. * Must have basic set of personal tools. * Trade school diploma or equivalent preferred. * Current Driver's License with clean driving history. * Previous inventory and/or warehouse experience preferred. * Line Mechanic or Mechanic Helper / Associate experience preferred. * 2 ASE Certifications-(Truck or Automotive series) Brake and Steering / Suspension. * Must be completed within first 6 months of employment. Knowledge, Skills, and Abilities * Basic automotive knowledge and skills necessary to perform maintenance and repairs on company vehicles. * Knowledge of the principles and techniques of effective verbal and written communication. * Knowledge of computer systems. * Knowledge of basic software programs. * Knowledge of supervisory principles and practices. * Ability to understand and apply applicable policies and procedures. * Ability to determine work priorities and ensure proper completion of work assignments. * Ability to communicate effectively verbally and in writing. * Ability to utilize problem-solving techniques. * Ability to work independently. * Ability to read electrical diagrams, and repair manuals. * Ability to establish and maintain effective working relationships with others. * Skill in the operation of word processing software programs on a personal computer. Physical Demands/Working Conditions Physical Requirement: Must have ability to lift and carry up to 75 lbs. Employee must be able to see, sit, climb or balance, hear, use hands, taste/smell, stoop, kneel, crouch, crawl, stand, walk, talk, and reach with hands and arms. This position performs duties of more than average difficulty requiring the exercise of considerable initiative and independent judgment under general direction. Working Conditions: While performing the duties of this job, the employee occasionally works in outside weather conditions, including temperature extremes, during day and night shifts. Work is often performed in stressful situations. Travel: Limited to local travel between offices and/or vendors. Hours: M-F varied hours. TransCare is open 365 days a year 24-hours a day. Employee may be required to work some holidays, evenings, and/or weekends. Employee may be re-called to duty in the event of a declared disaster or emergency. This job description is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give a general sense of the responsibilities and expectations of this position. As the nature of business demands change so, too, may the essential functions of this position. CCTB is committed to a policy of equal employment opportunity and affirmative action for our applicants and employees. It is our policy to apply recruiting, hiring, training, promotion, compensation, and professional development practices without regard to actual or perceived race, color, religion, sex (including pregnancy), gender identity, sexual orientation, national origin, age, disability or certain classifications based on genetic information, marital status, or any other characteristic protected by federal, state, or local laws, regulations or ordinances. Updated August 2025

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. PM MechanicPerforms preventative and predictive maintenance on facility machinery. Essential Functions Perform preventative and predictive maintenance on facility machinery. Troubleshoot mechanical/electrical/pneumatic systems using schematics and technical drawings. Repair equipment, fixtures, systems, conveyors and other equipment at facility as required. Lubricate, diagnose, and operate equipment. Work independently and with other team members to complete repairs timely and safely. Complete required daily paperwork, document parts and material usage. Maintain a clean and safe work area. May perform as a back up to production line worker. Understand and follow plant safety rules including safe lifting practices and safe machine operation. Personal Protective Equipment is to be used where required. Regular and predictable attendance is an essential function of the job. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Required to lift items up to 50 lbs throughout shift. Basic knowledge of Computerized Maintenance Mechanical System (CMMS), this includes experience with HMI's, work orders, etc. Experience with Microsoft Word, Outlook, Excel, etc. Team members need to provide their own tools, except in California locations where tools will be provided. Preferred Qualifications: 4 Years - Experience in Field or similar manufacturing environment 4 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma Preferred: Associate's Degree in Vocational Training in Mechanical, Electrical, Hydraulics, Pneumatics Technical School Certification in related field Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 1 year of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: Evening shift Night shift Weekly day range: Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

APPRENTICE TECHNICIAN We are seeking a motivated and reliable Apprentice Technician to join our dynamic team in the HVAC, Refrigeration, and Commercial Kitchen Equipment Repair industry. As an apprentice, you will gain hands-on experience, learn essential technical skills, and work alongside skilled professionals to become proficient in servicing, installing, and maintaining HVAC systems, refrigeration units, gas, steam, and electric. This individual must show growth within six months to one year before moving on to junior technician status. The Apprentice will be evaluated every three months and rotate between technicians to ensure diverse training. Key Responsibilities: Assist senior technicians with the installation, maintenance, and repair of HVAC, refrigeration, and commercial kitchen equipment Learn to troubleshoot and diagnose equipment issues using tools, meters, and specialized instruments Perform preventive maintenance tasks to ensure the proper functioning of equipment and systems Assist with system inspections, identify malfunctions, and provide recommendations for repairs or upgrades Maintain and organize equipment, tools, and spare parts inventory Keep accurate records of services performed, including diagnostic results, repairs, and parts used Adhere to safety guidelines and best practices when handling equipment, tools, and hazardous materials Participate in on-the-job training and attend formal training programs to develop technical knowledge and skills Communicate effectively with clients, answering questions and providing updates on repair or installation progress Assist in the preparation of estimates and work orders under supervision Support senior technicians in troubleshooting complex issues as experience is gained Requirements: High school diploma or equivalent. A strong interest in learning about HVAC, refrigeration, and commercial kitchen equipment repair Basic understanding of mechanical and electrical systems (training will be provided) Good problem-solving skills and attention to detail Ability to work in a physically demanding environment (lifting equipment, climbing ladders, working in confined spaces) Strong communication skills and the ability to work well as part of a team A valid driver's license and reliable transportation (some travel may be required) Ability to lift 50 - 70 pounds Willingness to commit to completing the apprenticeship program and pursuing a career in the trade Must be able to obtain any required fire watch and burn permits within 6 months of hire Benefits: Competitive pay with opportunities for increases based on performance and skills development Hands-on training and mentorship from experienced professionals Career growth opportunities within the company Health insurance with generous company contribution Dental, Life Insurance, Disability, and Vision 401K plan with employer match Vacation and sick days Paid holidays

American Flyers has been in business since 1939 and currently operates a fleet of 60 aircraft in the following locations: Dallas TX (2), Houston TX, Morristown NJ, Pompano Beach FL, and Scottsdale AZ. We have immediate availability for A&P Mechanics who would like to join our team working in an active flight school maintenance environment. We have positions available for both entry level and experienced mechanics with competitive wages with bonuses from $5,000 to $10,000 depending on experience and opportunities for future growth. Experience in some or all of the following areas are preferred, but not required: Inspections (100hr, 50hr, Annual) Cessna 172 & Piper Seminole Scheduled and unscheduled daily maintenance Airworthiness Directives Sheet metal repairs and alterations (major and minor) ADS-B Installations and repair Altimeter / Static and Transponder testing Power-plant troubleshooting, maintenance, and engine changes Aircraft painting Interior installations Electrical troubleshooting / repairs Single and Multi-engine aircraft maintenance Garmin G1000 Avionics maintenance and troubleshooting

Job Description As a BICYCLE Technician, no one day is the same as the last. This job is all about caring for bikes so their owners love riding them. You'll troubleshoot repairs and service all kinds of bikes, in addition to supporting the sales floor with building bikes and sales. You'll play an integral part of your teams' success by utilizing your mechanical skills, your willingness to learn, and desire to only deliver the highest quality service work to all our customers. Because you'll be speaking with customers to evaluate issues and recommend repairs, we value a genuine concern for our customers well-being and desire to solve their problems above everything else. As a BICYCLE Technician, you drive store results by selling and completing service, building bikes to standard, and executing every job with speed and accuracy. You are accountable for generating service revenue, delivering quality work the first time, and producing consistent results that grow customer retention and profitability. In all matters, we live by our Values. Do the right thing Do the best you can Show others we care Be coachable Duties Production Performance Work on servicing all bikes to maintain a timely turn-around on repairs while balancing the needs of the sales floor with bicycle assemblies and accessorizing. Financial Performance Be a backup to the Service Manager to work the service counter, interacting with customers while offering them everything they need to have the best experience on their bike(s) and with our company. Operations Performance Assist the team in maintaining the overall cleanliness and organization of both the Service Department and warehouse area where back-stock and service bikes are stored. • Facilitate transfer tasks as needed, keeping up to date on current policy and procedure. Perform other job-related duties as assigned. Requirements 100% Values Alignment - Do the Right Thing, Do the Best You Can, Show Others You Care, Be Coachable. No exceptions. Hands-On Mechanical Background - Previous experience in technical or mechanical trades that transfer to bicycle service. Strong Problem Solver - Takes ownership in finding solutions that keep work moving forward. Clear Communicator - Delivers accurate, direct communication with customers and teammates. Operates with Urgency - Works with speed and efficiency to maximize throughput and revenue. Adaptable Under Pressure - Adjusts quickly to changing priorities and workload. Schedule Flexibility- Available to work weekends, evenings, and peak seasons without resistance. Growth-Oriented Learner - Continuously builds skills and knowledge to improve performance. Consistently uphold all expectations outlined in the Trek Bikes Florida Non-Negotiable Standards document. Model and uphold our company value in all actions and decisions. Nice To Haves Active Lifestyle / Fitness-Oriented- Participates in cycling or other endurance/fitness activities; naturally aligns with our customers and culture. Bicycle Industry Experience - Brings direct knowledge of products, service standards, and customer expectations. Proficiency with Ascend - Familiarity with our POS system to improve efficiency and accuracy. Commitment to Personal Development - Actively engaged in growth through coaching or frameworks (e.g., Tony Robbins, Grant Cardone, Keith Cunningham, Ed Mylett, etc.), showing a mindset for continuous improvement. Proven Mechanical Aptitude - Demonstrates the ability to diagnose, repair, and assemble with precision. High Attention to Detail - Produces quality work the first time; avoids costly rework. Benefits Health and happiness are at the core of our business, and that includes yours, too. We're constantly striving to improve our work environment and provide a premium benefit package. We're proud to offer our full time and part time employees who work 30 hours per week the following benefit package after 60 days of employment: Medical Dental Visions 401k (after 1 year) AMAZING employee discount on bikes and accessories! This position requires open availability and flexibility to work mornings, evenings, weekends, and holidays based on the needs of the business. Our season runs from November 1st through March 31st. To ensure that we meet our customers' expectations during this busy time, we have implemented a vacation blackout period.Employees cannot schedule more than 3 days of PTO due to an expected increase in traffic.We understand that special circumstances may come up and we will do our best to accommodate our team. About Us We are Locally Owned and Family Operated since 2006 With 16 locations in Southeast and Southwest Florida, our exceptional team of cycling enthusiasts is here to serve all of your cycling needs. Whether you're new to the sport or a lifelong cyclist, we're here for you! Since 2006, we've provided South Florida's cyclists warm, trustworthy service at our family-owned shops.From our first Trek concept store in Estero to our many locations today, our mission has remained the same: To transform lives, one bike at a time-and promote health, joy, and community while we're at it. Our mission has helped us rank as one of America's Best Bike Shops eight years running and become a top 10 Trek dealer in North America. Join us as we transform lives one bike at a time. We can't wait to see where we go together.

Coke Florida is looking for a Fleet Technician based out of our Miami location. We're currently looking for 11:00AM to 7:30PM , working Monday through Friday. What You Will Do: As a Coke Florida Fleet Technician, you will be responsible for scheduling and performing mechanical repairs and preventative maintenance on all company fleet vehicles. Roles and Responsibilities: Perform mechanical repairs and preventative maintenance on all company fleet vehicles Troubleshoot, diagnose and complete repairs on all types of vehicles Perform preventative maintenance in fleet Respond to service calls Maintain tools and clean work area Pick up and deliver vehicles For this role, you will need: Minimum of 1 year of mechanic experience on light and heavy equipment Experience with heavy duty and PIT equipment Excellent demonstrated mechanical and technical aptitude May be required to supply automotive hand tools (not including heavy duty or diagnostic tools) Must have a driving record with no major moving violations in the last three (3) years* * Major moving violations include, but are not limited to, leaving the scene of an accident, driving under the influence, and reckless driving. Minor moving violations include, but are not limited to, speeding, driving too close, failure to stop, and improper lane changes. Driving records, including minor moving violations, will be evaluated according to Coke Florida guidelines to determine eligibility for the Fleet Mechanic position. Additional qualifications that will make you successful in this role: 3+ years journeyman mechanic experience highly preferred Gasoline, diesel and propane vehicle experience preferred ASE certification and CDL license or certification strongly preferred

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here. Job Posting External Job Duties * Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. * Perform all assigned planned maintenance on customer lift trucks. * Maintain a service van and its inventory. * Process paperwork after completion of each job. Minimum Qualifications * Less than 2 years related experience * High school diploma or equivalent * Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications * Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. * Good written/verbal communication and customer care skills. * Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. * Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. * Industry related training is preferred * Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: * Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities Nearest Major Market: Miami Job Segment: Warehouse, Electrical, Diesel Mechanic, Forklift, Maintenance, Manufacturing, Engineering

About Us At The Pharmacy Hub, we collaborate with pharmaceutical brands, manufacturers, health brands, telemedicine providers, and healthcare companies to deliver essential products directly to patients. Our expertise allows us to seamlessly distribute pharmaceuticals, medical devices, and other healthcare products to consumers, ensuring greater accessibility and convenience. Core Values The Pharmacy Hub is dedicated to breaking barriers in healthcare by championing access, intervention and affordability. Customer-first mindset - we develop strong partnerships with telehealth platforms and healthcare companies to enhance access and understand their specific needs Innovation for intervention in care - we develop advanced compounding solutions and products to better support patient health outcomes Continuous improvement - we continuously improve our processes and offerings through intelligent, honest and transparent practices to deliver cost-effective solutions that truly benefit our clients and their patients. You will play a pivotal role in maintaining these values and contributing to the company's mission of redefining healthcare delivery through superior pharmacy services. Job Summary The Industrial Mechanic/Millwright is a journey-level professional responsible for installing, maintaining, repairing, and overhauling the complex mechanical systems and machinery critical to our mail-order pharmacy operations. This role requires a comprehensive understanding of mechanical systems to ensure minimal downtime and maximum efficiency of high-speed automation, conveyor systems, and facilities equipment. The ideal candidate is a proactive problem-solver who works safely and efficiently in a fast-paced, regulated environment. Key Responsibilities Perform complex troubleshooting, diagnostics, and repair of mechanical failures on a wide range of equipment, including packaging machinery, conveyor systems, sorters, and facilities equipment. Execute precision installation, alignment, and leveling of new machinery and equipment using laser alignment tools, levels, and precision measuring instruments. Conduct preventative maintenance (PM) and predictive maintenance tasks, including vibration analysis, thermal imaging, and oil analysis, to identify and address issues before they cause failures. Disassemble, repair, and reassemble complex mechanical components such as gearboxes, ball screws, power transmission systems, pumps, and pneumatic/hydraulic systems. Read and interpret complex mechanical, hydraulic, and pneumatic schematics, as well as engineering blueprints and layout drawings. Fabricate and modify parts and components using machining tools such as lathes, mills, and grinders, and welding equipment as needed. Rig, lift, and move heavy machinery and components safely, following all rigging and hoisting protocols. Document all work performed, parts used, and time spent accurately in the Computerized Maintenance Management System (CMMS). Collaborate with operators, electricians, and engineers to improve equipment reliability and performance. Strictly adhere to all safety standards. Qualifications High school diploma or equivalent (GED) required. Completion of a recognized Millwright or Industrial Mechanic apprenticeship program is required. A minimum of 2-5 years of experience as a Journeyman Millwright or Industrial Mechanic in an industrial, manufacturing, or distribution setting. Experience in a pharmaceutical, food, beverage, or other cGMP-regulated industry is a plus Basic English with the ability to read and write. Skills & Abilities Ability to diagnose root causes of mechanical failures and implement effective, long-term solutions. Mastery in laser shaft alignment, leveling, and setting machinery to precise tolerances. In-depth knowledge of mechanical systems, including bearings, seals, lubrication, drives, couplings, and pneumatics/hydraulics. Proficiency in machining (turning, milling, drilling) and welding (MIG, TIG, Stick) to create and repair parts. A proven track record of working safely in an industrial environment and a thorough understanding of LOTO procedures. Ability to work with minimal supervision, manage multiple priorities, and respond effectively to emergency breakdowns. What We Offer Competitive salary. Quarterly bonus program based on productivity and efficiency. Flexible scheduling options (including evenings/weekends as needed). Opportunities for growth in a rapidly expanding telepharmacy practice. Collaborative and innovative work environment focused on patient safety and compliance. Location: Fort Lauderdale, FL Shifts: DBT This is a full-time position, working 44 hours per week. This is a 100% onsite role; remote or hybrid work is not available Pay Range$25-$27 USD Benefits: 401(k) with up to 4% matching Medical, dental, vision and life insurance Paid time off Paid public holidays At The Pharmacy Hub, we don't just offer jobs-we offer opportunities for career growth and development. We take pride in our fast-paced, team-driven culture and are committed to supporting our employees in achieving success. If you're ready to join a company that values hard work, dedication, and teamwork, apply today! We look forward to welcoming you to The Pharmacy Hub and working together to deliver top-tier pharmacy fulfillment solutions.

Job Title : MIA Station Mechanic Department : Maintenance Reports To : Outstation Line Maintenance Manager ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties and responsibilities include, but are not limited to: Conduct Terminating Service maintenance checks per the KA General Maintenance Manual at least every 50 flight hours. Accomplish all required servicing of the aircraft, including wheel and brake replacement, engine oil servicing, replacing burnt-out light bulbs, wiping down struts, etc. Troubleshoot and repair defects discovered and complete all return to service paperwork completely and on a timely basis. Forward copies of repair information to Maintenance Control as work is completed. Perform other duties as directed by the GMM, Maintenance Control, or his supervisor QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Also required is an A&P license, and previous 747 experience is desirable. Tools are required as well. EDUCATION and/or EXPERIENCE High school graduate; some college and/or technical school desirable. LANGUAGE SKILLS Ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence. Ability to give verbal and written direction to assigned staff. PHYSICAL DEMANDS The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to reach with hands and arms, stand; walk; talk or hear; and use hands and fingers to handle, feel or operate objects, tools, or controls. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move more than 50 pounds to eye level. Lift 10 pounds with each arm over your head Twist, turn with normal strength forces Climb numerous flights of stairs Work on ladders, lifts, and in some cases high elevations Work in a squatted position Work in all weather conditions WORK ENVIRONMENT The work environment characteristics described here represent those employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed primarily in construction, maintenance settings. The noise level in the work environment is usually loud. ACCOMMODATIONS: If you need reasonable accommodation for the online application due to a disability, please call **************. Please include your contact information and details about posted position of interest. Only inquiries regarding assistance for those who need accommodation with the online application process due to a disability will be returned. **Must be authorized to work in the United States.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here. Job Posting External Job Duties * Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. * Perform all assigned planned maintenance on customer lift trucks. * Maintain a service van and its inventory. * Process paperwork after completion of each job. Minimum Qualifications * Less than 2 years related experience * High school diploma or equivalent * Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications * Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. * Good written/verbal communication and customer care skills. * Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. * Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. * Industry related training is preferred * Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: * Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities Nearest Major Market: Fort Lauderdale Nearest Secondary Market: Miami Job Segment: Warehouse, Diesel Mechanic, Forklift, Maintenance, Manufacturing, Customer Service