Diesel technician jobs in Coral Springs, FL

7110 - International Mall - 1300 NW 98th Ct, Doral, Florida, 33172CarMax, the way your career should be! CarMax is now hiring Automotive Technicians! Start loving what you do at CarMax Ensure every vehicle is one our customers can rely on At CarMax, our Automotive Technicians repair and recondition cars to meet CarMax's high standards. Automotive Technicians use their skills to diagnose, fix and prepare vehicles for our customers. From repairing engines to adjusting steering and suspension and checking brakes, our Automotive Technicians bring out the best in every vehicle. And we'll help bring out the best in you too, being part of a skilled team, with a clean, modern, climate-controlled environment and production facilities for top-notch reconditioning. You will also enjoy a generous range of company benefits including: - Paid time off - Medical / dental coverage - 401k with company match - Vehicle discount - Tuition reimbursement - and more! What you will do - Essential responsibilities Automotive Technicians diagnose, recondition and repair vehicles to ensure CarMax customers can drive away feeling safe and at ease Work as part of a team to solve technical problems quickly and effectively Build experience as an automotive mechanic across a wide range of domestic and foreign vehicles Follow and promote our high standards of safety, cleanliness and organization Be part of a team that cares about customers and their cars CarMax Automotive Technicians work in a fast-paced environment where motivation is key. Working together with other Automotive Technicians you will solve problems, meet deadlines, and deliver great results. CarMax wants you to produce your best work, so we support our associates by providing the equipment you need to get the job done and the feedback that helps you get better every day. We also promote your interest in learning and development by supporting you with training to acquire new skillsets and accreditations. Qualifications and requirements Experience in one or more of the following: engine repair, steering and suspension, brakes, heating and air conditioning Knowledge of health and safety compliance Manual dexterity and physical stamina, lift heavy objects, and walk and stand for extended periods of time Manage multiple tasks in a fast-paced environment Good communication skills and attention to detail Possession of a valid driver's license Where required by State/Local law, maintain ASE Certifications in Steering and Suspension (A4), Brakes (A5), Heating Air Conditioning (A7), Electrical (A6), Engine Repair (A1), Manual Drive Train and Axles (A3), Engine Performance (A8), and Automatic Transmission/Transaxle (A2) About CarMax CarMax disrupted the auto industry by delivering the honest, transparent and high-integrity experience customers want and deserve. This innovative thinking around the way cars are bought and sold has helped us become the nation's largest retailer of used cars, with over 200 locations nationwide. Our amazing team of more than 25,000 associates work together to deliver iconic customer experiences. Along the way, we help every associate grow their career and achieve their best, at work and in their community. We are recognized for our commitment to training and diversity and are one of the FORTUNE 100 Best Companies to Work For . CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in West Palm Beach, Florida Hear it from a Ryder Technician Employee Here: Hourly Pay:?$31.00 Certification Bonus of $100 for each New ASE Certification Obtained up to $700 Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days Schedule: Monday-Friday Weekends OFF Hours: Second Shift 3:00 pm - 11:30 pm We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles. Apply Here with Ryder Today We have all the benefits other shops do?without the wait! Annual Merit Pay Increases Every Year On the Job Paid Training Medical, Dental, Vision, 401 K etc. Start at 30 Days We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply) Paid Time Off Starts Accruing at DAY ONE with 80 hours per year Additional Day Off for U.S. Military Veterans 401 K offers a company match HIGH VALUED Stock at 15 % Employee Discount PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000! Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today! Click Here to See All Ryder Careers:************************************************ We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Requirements High school diploma or equivalent preferred Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred Basic tools, required Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including: Routine preventative maintenance, which should include oil changes, brake and tire work, required Two (2) years or more of a combination of classroom training and work experience in required experience, preferred Valid Commercial Driver License (CDL) CLASS A,preferred This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must: Must be able to obtain CDL within 6 months after hire Pass a Ryder Drug Test Pass a DOT physical Pass a Ryder road test Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities Performs vehicle maintenance and repair duties Performs standard vehicle maintenance Performs standard component inspections and repairs Performs preventive maintenance Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable Identifies root cause of basic failures/conditions and perform repairs as required Replaces defective components as instructed Performs facility maintenance duties Interacts with customers/drivers to properly determine nature of complaint once assigned a task Utilizes key functions of Shop Management System and electronic documentation available Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT) Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 7 hours ago (12/2/2025 1:00 PM) Requisition ID 2025-192201 Location (Posting Location) : State/Province FL Location (Posting Location) : City WEST PALM BEACH Location (Posting Location) : Postal Code 33409 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $31.00/Hr. Max Pay USD $31.00/Hr.

Diesel Mechanic, Earn up to $39.38 / hr. Full-Time, Monday - Friday,3rd shift 12:30 am to 10:00 am Earn 1 week of PTO after 90 days of employment and enjoy an excellent benefits package that includes are very own employee resorts Click here to learn more about our employee resorts R+L Carriers - Women in Trucking R+L Carriers has an immediate opportunity for Forklift Mechanics at our Pembroke Pines, FL Service Center. Preferred Candidates will have the ability to lift up to 125lbs, work in a fast-paced environment as well as rebuild, repair, and maintain forklifts, pallet jacks, and hydraulic lifts. Other duties as required by management. Job Description: R+L Carriers has an immediate opportunity for Diesel Mechanics at our Pembroke Pines, FL Service Center. As a Diesel Mechanic, you will be responsible for day-to-day equipment maintenance on our fleet equipment consisting of preventative maintenance and minor to major repairs to Class 8 trucks, trailers, and potentially forklifts. This can include maintaining trailers, overhead doors, lift gates, dollies, welding depending on location. Click here to learn more about being a Truck Mechanic Requirements: * Experience in preventive maintenance and repairs on diesel engines * Must be able to handle major repairs * Experience with AC and Electrical * Have the ability to lift 50lbs * Must have own tools Preferred: * 2+ Years of Diesel Mechanic experience preferred * Experience in preventive maintenance of Cummins & Detroit engines * Experience using Cetaris used for work orders * Class A CDL holder * Experience driving Class 8 commercial trucks * Experience in Trailer PMs and repairs Benefits:R+L Carriers offers an excellent compensation and comprehensive benefits package that includes Medical/Dental/Vision Insurance, 401(k) Retirement Plan with company matching contributions, Paid Vacation & Holidays, and vacation lodging at our exclusive employee resorts in Daytona Beach, FL, Big Bear Lake, CA, Pigeon Forge, TN, and Ocean Isle Beach, NC. About Us: R+L Carriers is a family owned, privately held transportation company founded in 1965. Our business caters to the transportation and distribution industry and is designed to provide customers with superior service through efficient administration and innovative thinking. The Company prides itself in treating our employees and customers with respect and honesty. We believe each employee contributes directly to the Company's growth and success. There are many other transportation companies capable of picking up and delivering freight. However, we believed our customers select us because of the efforts of our employees. R+L Carriers Shared Services, LLC ("R+L Carriers") and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, sexual orientation, gender, gender identity or expression, genetic information, national origin, age, veteran status, disability, or any other status protected by federal or state law. R+L Carriers will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. When completing this application, you may exclude information that would disclose or otherwise reference your race, religion, age, sex, genetic, veteran status, disability or any other status protected by federal or state law. This application is considered current for ninety (90) days only. At the end of this period, if you are still interested in employment, it will be necessary for you to reapply by completing a new application.

About Us At The Pharmacy Hub, we collaborate with pharmaceutical brands, manufacturers, health brands, telemedicine providers, and healthcare companies to deliver essential products directly to patients. Our expertise allows us to seamlessly distribute pharmaceuticals, medical devices, and other healthcare products to consumers, ensuring greater accessibility and convenience. Core Values The Pharmacy Hub is dedicated to breaking barriers in healthcare by championing access, intervention and affordability. Customer-first mindset - we develop strong partnerships with telehealth platforms and healthcare companies to enhance access and understand their specific needs Innovation for intervention in care - we develop advanced compounding solutions and products to better support patient health outcomes Continuous improvement - we continuously improve our processes and offerings through intelligent, honest and transparent practices to deliver cost-effective solutions that truly benefit our clients and their patients. You will play a pivotal role in maintaining these values and contributing to the company's mission of redefining healthcare delivery through superior pharmacy services. Job Summary The Industrial Mechanic/Millwright is a journey-level professional responsible for installing, maintaining, repairing, and overhauling the complex mechanical systems and machinery critical to our mail-order pharmacy operations. This role requires a comprehensive understanding of mechanical systems to ensure minimal downtime and maximum efficiency of high-speed automation, conveyor systems, and facilities equipment. The ideal candidate is a proactive problem-solver who works safely and efficiently in a fast-paced, regulated environment. Key Responsibilities Perform complex troubleshooting, diagnostics, and repair of mechanical failures on a wide range of equipment, including packaging machinery, conveyor systems, sorters, and facilities equipment. Execute precision installation, alignment, and leveling of new machinery and equipment using laser alignment tools, levels, and precision measuring instruments. Conduct preventative maintenance (PM) and predictive maintenance tasks, including vibration analysis, thermal imaging, and oil analysis, to identify and address issues before they cause failures. Disassemble, repair, and reassemble complex mechanical components such as gearboxes, ball screws, power transmission systems, pumps, and pneumatic/hydraulic systems. Read and interpret complex mechanical, hydraulic, and pneumatic schematics, as well as engineering blueprints and layout drawings. Fabricate and modify parts and components using machining tools such as lathes, mills, and grinders, and welding equipment as needed. Rig, lift, and move heavy machinery and components safely, following all rigging and hoisting protocols. Document all work performed, parts used, and time spent accurately in the Computerized Maintenance Management System (CMMS). Collaborate with operators, electricians, and engineers to improve equipment reliability and performance. Strictly adhere to all safety standards. Qualifications High school diploma or equivalent (GED) required. Completion of a recognized Millwright or Industrial Mechanic apprenticeship program is required. A minimum of 2-5 years of experience as a Journeyman Millwright or Industrial Mechanic in an industrial, manufacturing, or distribution setting. Experience in a pharmaceutical, food, beverage, or other cGMP-regulated industry is a plus Basic English with the ability to read and write. Skills & Abilities Ability to diagnose root causes of mechanical failures and implement effective, long-term solutions. Mastery in laser shaft alignment, leveling, and setting machinery to precise tolerances. In-depth knowledge of mechanical systems, including bearings, seals, lubrication, drives, couplings, and pneumatics/hydraulics. Proficiency in machining (turning, milling, drilling) and welding (MIG, TIG, Stick) to create and repair parts. A proven track record of working safely in an industrial environment and a thorough understanding of LOTO procedures. Ability to work with minimal supervision, manage multiple priorities, and respond effectively to emergency breakdowns. What We Offer Competitive salary. Quarterly bonus program based on productivity and efficiency. Flexible scheduling options (including evenings/weekends as needed). Opportunities for growth in a rapidly expanding telepharmacy practice. Collaborative and innovative work environment focused on patient safety and compliance. Location: Fort Lauderdale, FL Shifts: DBT This is a full-time position, working 44 hours per week. This is a 100% onsite role; remote or hybrid work is not available Pay Range$25-$27 USD Benefits: 401(k) with up to 4% matching Medical, dental, vision and life insurance Paid time off Paid public holidays At The Pharmacy Hub, we don't just offer jobs-we offer opportunities for career growth and development. We take pride in our fast-paced, team-driven culture and are committed to supporting our employees in achieving success. If you're ready to join a company that values hard work, dedication, and teamwork, apply today! We look forward to welcoming you to The Pharmacy Hub and working together to deliver top-tier pharmacy fulfillment solutions.

As a Fleet Maintenance Tractor Technician, A Level, you will be responsible for performing core elements of fleet maintenance primarily with Tractor assets, but will include exposure to other fleet assets within the operations. A fleet maintenance tractor technician will perform and trouble shoot preventative maintenance and repairs, will effectively complete work orders, and support shop projects to optimize asset up-time and productivity all while working safely and embodying the safety culture and atmosphere. Job Description Benefits start on day one! Schedule: Tuesday-Friday 07:30 AM-04:00 PM, Saturday 05:00 AM- 01:30 PM Compensation starting at $26.54-$33.18 Check out a day in the life here: ***************************** You will contribute by: + Preventative Maintenance: With oversight, conduct asset inspection by item level task. Complete small repairs, post PM inspection. Successful inspection post PM completion for completeness and within parameters. Perform FHWA successfully (with shadow) + Work Aptitude & Technical Abilities: Participate in supporting other technicians to glean skills and expertise. Follow ongoing cycle of reading, classroom environment, observe expert executing repair and then demonstrate skill and proficiency for each critical learning by system + Training: Work closely with tenured technician to learn technical aspect of the job. Read, study and test modules or chapters of technical materials. Successfully certify at test level and demonstrate technical CompetencyComplete ongoing Manufacturer training/certification + Support shop projects and related tasks to optimize asset up-time and productivity. + Complete work-orders for thoroughness and detailed history to demonstrate Complaint, Cause and Correction + Travel Required: Yes Environment + Warehouse : Grocery Warehouse (50F to 90F) Skills + CDL Preferred. Base understanding of mechanical principles and aptitude to complete repairs on Heavy Duty equipment with moderate instruction. Vehicle maintenance systems, commercial truck components, driver D.O.T. regulations. Transman familiarity and VMRS understanding + Physical abilities: Heavy lifting involved, carrying, pushing, pulling, etc. 8 hours of contiguous standing, squatting and twisting at times. Working with computers some of the day + Pride in high work quality and High attention to detail and accuracy Years Of Experience + 5-7: Mechanical exposure and understanding of principles of Internal Combustion Engines and previous work experience is strongly recommended. We Offer + Benefits available from day 1 (medical, dental, vision) + Company Matched 401-k + Paid training + Weekly Pay + PTO and Holiday Pay offered + Career Progression Opportunities + Tuition Reimbursement + Employee Health & Wellness program + Employee Discounts / Purchasing programs + Employee Assistance Program + C&S Offers $100 towards the purchase of safety shoes Every person matters. We keep our values alive through a culture that embraces differences and ensures that every person matters. The Fine Print This Job advertisement does not constitute a promise or guarantee of employment. This job advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of C&S Wholesale Grocers. Qualifications High School Diploma - General Studies, KPIs, Safety & Sanitiation, Training & Development, Values & Teamwork, Warranty Shift 1st Shift (United States of America) Company C&S Wholesale Grocers, LLC About Our Company C&S Wholesale Grocers, LLC is an industry leader in supply chain solutions and wholesale grocery supply in the United States. Founded in 1918 as a supplier to independent grocery stores, C&S now services customers of all sizes, supplying more than 7,500 independent supermarkets, chain stores, military bases and institutions with over 100,000 different products. C&S also proudly operates and supports corporate grocery stores and services independent franchisees under a chain-style model throughout the Midwest, South and Northeast. We are an engaged corporate citizen, supporting causes that positively impact our communities. Working Safely is a Condition of Employment at C&S Wholesale Grocers, LLC. C&S Wholesale Grocers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. The Company provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Company: C&S Wholesale Grocers, LLC Job Area: Transportation Job Family: Transportation Job Type: Regular Job Code: JC1545 ReqID: R-265373

Coke Florida is looking for a Fleet Technician based out of our Hollywood location. We're currently looking for 10:00PM to 8:30AM shift, working Saturday through Tuesday. What You Will Do: As a Coke Florida Fleet Mechanic, you will be responsible for scheduling and performing mechanical repairs and preventative maintenance on all company fleet vehicles. Roles and Responsibilities: Perform mechanical repairs and preventative maintenance on all company fleet vehicles Troubleshoot, diagnose and complete repairs on all types of vehicles Perform preventative maintenance in fleet Respond to service calls Maintain tools and clean work area Pick up and deliver vehicles For this role, you will need: Minimum of 1 year of mechanic experience on light and heavy equipment Experience with heavy duty and PIT equipment Excellent demonstrated mechanical and technical aptitude May be required to supply automotive hand tools (not including heavy duty or diagnostic tools) Must have a driving record with no major moving violations in the last three (3) years* * Major moving violations include, but are not limited to, leaving the scene of an accident, driving under the influence, and reckless driving. Minor moving violations include, but are not limited to, speeding, driving too close, failure to stop, and improper lane changes. Driving records, including minor moving violations, will be evaluated according to Coke Florida guidelines to determine eligibility for the Fleet Mechanic position. Additional qualifications that will make you successful in this role: 3+ years journeyman mechanic experience highly preferred Gasoline, diesel and propane vehicle experience preferred ASE certification and CDL license or certification strongly preferred

About RYAM RYAM is a global leader of cellulose-based technologies, including high purity cellulose specialties, a natural polymer commonly found in filters, food, pharmaceuticals and other industrial applications. The Company also manufactures products for paper and packaging markets. With manufacturing operations in the U.S., Canada and France, RYAM employs approximately 2,500 people and generates approximately $1.4 billion of revenues. More information is available at ********************** RYAM's intellectual property and manufacturing processes have been developed over 90 years, resulting in unique properties and very high quality and consistency. RYAM is consistently ranked among the nation's top 50 exporters and delivers products to 79 ports around the world, serving customers in 20 countries across five continents. At RYAM, we're shaping the future of talent. RYAM has a specific purpose…to be the world's leading manufacturer of renewable products, including paper, packaging, and high purity cellulose. We want smart, innovative people who can find new ways to solve challenging problems. We need talented professionals across multiple disciplines who want to contribute to the company's mission and advance its vision, while also shaping its future. You will shape the future of the Fernandina maintenance department by: Repairing, installing, and rebuilding mechanical equipment throughout the mill as well as possessing personal initiative in meeting the training requirements to improve individual industrial skills specific to the RYAM Fernandina Plant. Qualified candidates will bring the following experience and skill sets: * High school diploma or GED * Three (3) years of industrial maintenance experience * Be proficient in base craft and qualified to perform all tasks associated with troubleshooting, pump installation and alignment, conveyors, drag chains, operating heavy equipment, and repairing or replacement of mill equipment. * Able to draft, read and understand mechanical drawings, machinery specifications and parts list * Functional in three (3) additional base skills (millwright, pipefitting, instrumentation, machinist, carpentry or electrical) * Knowledge of pumps, filters, grinders, gears, hydraulic systems, pipe installation and welding * Possess basic computer and handheld devices skills * Own a complete set of basic mechanical tools * Self-starter who can work safely under high-pressure situations * Experience with Predictive Technologies such as Vibration Analysis, Ultrasound equipment, and Precision Alignment preferred * SAP experience preferred Working conditions * The working conditions include an indoor non-air-conditioned industrial manufacturing and warehouse environment. Subject to temperatures that range from 65 to 90 degrees in the general working environment and hotter in certain areas of the plant. Occasional outdoor activities in hot, cold, or adverse weather. * Twenty-four hour working environment. Must be available and willing to work rotating shifts. Physical requirements * Must pass and maintain all medical and fit-testing requirements for respiratory equipment * Must be able to stand on concrete floors for an extended period, climb narrow stairs, ladders, and scaffolding. Work in confined spaces or at heights and occasionally lift up to 50 pounds during the shift. Why you will love working for RYAM: * Competitive pay, potential to earn $100,000 annually * Medical, Dental, Vision * Short term / Long term disability * Bonus / Merit * Life insurance (Company paid & Voluntary) * Company paid Employee Assistance Program (EAP) * Tuition reimbursement * Wellness reimbursement * Retirement plan EOE/Vet/Disability

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Mobile Diesel Tech II Management Level Individual Contributor Flexible Work Option Can work remotely but need to live in the specified city, state, or region Travel % Yes 100% of the time Work Shift Variable Compensation Hourly base pay rate is $26.06 - $39.13/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description * If you have any questions or to connect with a recruiter while your application is being reviewed, please Text DFS3 to ************ * Veterans encouraged to apply Fleet Services - A Cox Automotive Company keeps your fleet moving! Headquartered in Indianapolis, Fleet Services by Cox Automotive has grown to become one of the largest fleet maintenance companies in the country. Fleet Services is the leading provider of on-site mobile maintenance and repair services nationwide, offering mobile on-site fleet service for light medium, and heavy-duty trucks and trailers. Fleet Services also services customers utilizing its 50+ nationwide service centers; each offering accident repair, painting, refurbishment, and heavy mechanical repair. We are supported by a 24/7 in-house call-center and provide scheduled maintenance services and unscheduled services to fleets anywhere, anytime. Fleet Services By Cox Automotive is currently hiring a Mobile Diesel Technician Level II. The Mobile Diesel Technician Level II will be responsible for performing licensed DOT inspections, Preventative Maintenance inspections, light and follow-up repairs, light mechanical/hydraulic/electrical and electronic diagnostics, and other duties as assigned. The Mobile Diesel Technician II can perform more advanced diagnostics and repairs under the supervision of a Sr Mobile Diesel Technician or higher. The Diesel Technician II continues to learn additional advanced mechanical skills and diagnostic techniques. A successful Diesel Technician II complies with all company policies and achieves high level performance metrics. DUTIES: * Perform scheduled preventative maintenance ("PM"), DOT Inspections and follow up repairs on light, medium and heavy-duty vehicles in a mobile/field environment. * Perform minor adjustment and repairs on various types of truck equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Fan clutches, Engine electronics, Diesel steering systems, Engines (gas and diesel), Transmissions (manual and automatic), Clutches, Differentials, etc. * Diagnose, adjust, and repair various types of truck equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Air conditioning systems, Fan clutches, Engine electronics, Diesel steering systems, Engines (gas and diesel), Transmissions (manual and automatic), Clutches, Differentials, etc. * Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers and pressure gauges. * Road test vehicles to diagnose malfunctions and to ensure that they are working properly. * Identify problems, determine accuracy and relevance of information, using sound judgment to generate and evaluate alternatives. * Independently manage parts inventory and equipment provided on company-issued service truck and perform periodic reconciliation. * Maintain and operate company-issued service vehicle, conduct safety checks, and pre-/post-trip inspections of vehicle. * Work with and listen effectively to clients and customers to assess their needs, providing information or assistance, resolving their problems, or satisfying their expectations. * Manage concurrent assigned tasks, making effective judgments as to prioritizing work related activities and time allocations. * Use hand tools, precision instruments, as well as Diesel tools, welding equipment, lift and jacks. * Document according to company standards and upload pictures of work performed, parts used, and all findings observed on Repair Orders ("RO") using company-issued iOS device and our proprietary TRAIT application. * Accurately complete DOT forms and all other forms of documentation in a timely fashion. * Work with a high degree of independence and manage own daily schedule. * Maintain a high level of productivity and be able to work within or close to most Standard Repair Times. * Obtain parts from approved local and national vendors as necessary for the repairs to be performed. * Communicate with management and support team via email or phone to obtain approvals on repair estimates, retrieve purchase order numbers and/or discuss RO findings notes. * Perform all work in compliance with organizational safety, health and environmental policies, and federal regulations, to include OSHA, EPA, and DOT. * Maintain company issued service truck, conduct safety checks and daily pre/post trip inspections. REQUIREMENTS: * High School Diploma/GED and 3 years' experience in a related field. The right candidate could also have a different combination, such as any level degree/certification beyond a HS diploma/GED in a related discipline; or 5 years' experience in a related field. * Possess and supply a set of hand tools necessary to perform required job duties. * Obtain Automotive Service Excellence (ASE) certification T8 (PMI) within eighteen (18) months. * This position follows regulations issued by the Department of Transportation's (DOT) Federal Motor Carrier Safety Administration (FMCSA). Candidate must be able to successfully complete and pass a DOT-regulated pre-employment background screening and DOT physical prior to employment. * A current and valid DOT medical card with more than four (4) months remaining until its expiration may be submitted in leu of a DOT physical. If the DOT medical card has four (4) months or less of validity remaining, a DOT physical will be required. * Due to interstate operating authority commerce regulations, candidates must be at least 21 years or older. * Safe drivers needed; valid driver's license required. Candidate must hold a valid state-of-residence driver's license, be able to obtain and maintain their Driver Qualification File. REQUIRED CERTIFICATIONS OR OBTAINED WITHIN 18 MONTHS * ASE T8 (PMI) certification PREFERRED CERIFICATIONS * ASE T3 (Drivetrain) certification * ASE T4 (Brakes) certification * ASE T5 (Suspension) certification * ASE T6 (Electrical and Electronic Systems) * ASE T7 (HVAC) certification * ASE 608/609 certification* SKILLS & ABILITIES * Understand the implications of new information for both current and future problem-solving and decision-making. * Ability to lift, bend, climb, stand, and walk for long periods of time; ability to perform moderately heavy laboring work * Ability to exert oneself physically over long periods of time without tiring, which may include performing repetitive tasks. * Communicates information (for example, facts, ideas, or messages) in a succinct and organized manner. Engages in effective two-way communication with individuals and groups. * Ability to determine the type of tools and equipment needed. * Ability to accurately judge which of several objects is closer or farther away from the observer, or the distance between an object and the observer. * Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Why Fleet Services By Cox Automotive? * Safe driving & Tech efficiency bonuses * Safety Boots & Safety Glasses reimbursement * Extreme weather gear (Cold & Hot) * Uniforms provided with laundry service where available * Take the service truck home daily (stop paying for gas!) * Laptop & company cellphone provided * Technical training provided to advance your career * Dedicated career path - 'Over 50% of our front-line managers are promoted from within'. Benefits: * Health, dental, vision insurance starts DAY ONE of employment. * 401(k) matching starts after 90 days, 100%-match up to 6% contribution and an additional 2% discretionary contribution by the company. * Accrue up to 200 hours (5-weeks) of Paid Time Off based on your tenure with the company. * Tuition Assistance/Reimbursement * Adoption/Surrogacy assistance * Pet Insurance * Multiple ERG, diversity groups, and company paid volunteer hours. * Employee discounts on new vehicle purchases, cellphone plans, ridesharing, home/rental insurance, wellness/fitness incentives and much more. Benefits Employees are eligible to receive a minimum of 6.67 hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship.

Accelerate your career with Ed Morse Automotive Group! With 75+ years of industry experience, we provide excellent service to our customers and team members. Our expanding automotive group spans across FL, TX, OK, MO, IL, IA, CO, and AZ with over 50 + locations, representing 30+ automotive, powersports, and motorcycle brands. Join a family-oriented company that values personal and professional growth. Ed Morse is currently seeking an experienced Automotive Service Technician to join our team. Responsibilities As a Technician you will be experienced and aware of the latest automotive technologies and be a persistent problem solver. Perform work specified on maintenance and repair orders with efficiency and in accordance with dealership standards Diagnose and repair vehicle automotive systems including engine, transmission, electrical, steering, suspension, braking, air conditioning, etc. to specification Provide labor and time estimates for additional automotive repairs Explain mechanical diagnoses and required repairs in a non-technical manner to service advisors and customers Continuously learn new technical information and techniques in formal training sessions in order to stay abreast with rapidly changing technology. Inspect and test new vehicles and recording findings so that necessary repairs can be made. Qualifications Hold a valid driver's license Minimum 3 years of experience ASE Certified Team oriented, flexible and focused on maintaining a high level of customer service Working knowledge of shop equipment such as wheel and tire equipment, alignment system, diagnostic equipment, AC equipment, etc. Must be willing to submit to a background check, DMV screen, and drug screen Why Ed Morse? In addition to a rewarding career, Ed Morse offers our employees the following: Weekly Pay Uncapped earning potential! -Bonuses, Commissions, etc. 401K with company match Competitive Health Benefits including: Medical, Dental, Vision Supplemental Insurance options, Life Insurance, Short-Team Disability & Long-Term Disability Employee Assistance Program Quarterly Wellness Program Vacation Pay Sick Pay Six Paid Holidays each calendar year Fantastic Employee Purchase Program - Discounts on vehicles, parts & service Employee Referral Program - Get rewarded for working with friends Become involved in our community with Ed Morse Cares Unlimited career potential - opportunities in multiple states with over 30+ brands and growing! Ongoing Education - receive manufacturer and product knowledge training Not ready to apply? Connect with us for general consideration.

Job Title : MIA Station Mechanic Department : Maintenance Reports To : Outstation Line Maintenance Manager ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties and responsibilities include, but are not limited to: Conduct Terminating Service maintenance checks per the KA General Maintenance Manual at least every 50 flight hours. Accomplish all required servicing of the aircraft, including wheel and brake replacement, engine oil servicing, replacing burnt-out light bulbs, wiping down struts, etc. Troubleshoot and repair defects discovered and complete all return to service paperwork completely and on a timely basis. Forward copies of repair information to Maintenance Control as work is completed. Perform other duties as directed by the GMM, Maintenance Control, or his supervisor QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Also required is an A&P license, and previous 747 experience is desirable. Tools are required as well. EDUCATION and/or EXPERIENCE High school graduate; some college and/or technical school desirable. LANGUAGE SKILLS Ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence. Ability to give verbal and written direction to assigned staff. PHYSICAL DEMANDS The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to reach with hands and arms, stand; walk; talk or hear; and use hands and fingers to handle, feel or operate objects, tools, or controls. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move more than 50 pounds to eye level. Lift 10 pounds with each arm over your head Twist, turn with normal strength forces Climb numerous flights of stairs Work on ladders, lifts, and in some cases high elevations Work in a squatted position Work in all weather conditions WORK ENVIRONMENT The work environment characteristics described here represent those employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed primarily in construction, maintenance settings. The noise level in the work environment is usually loud. ACCOMMODATIONS: If you need reasonable accommodation for the online application due to a disability, please call **************. Please include your contact information and details about posted position of interest. Only inquiries regarding assistance for those who need accommodation with the online application process due to a disability will be returned. **Must be authorized to work in the United States.

Great Pay & Benefits Package! World Class Equipment, Technology & Training Target Pay of $34.35/hr Benefits -- Medical, vision and dental starting Day 1! Company-provided retirement benefits Paid time off Company provided i-pad, i-phone, uniforms, PPE, and work boot allowance Ongoing training and career growth opportunities Are you ready to join a winning team? Pepsi Beverages North America (PBNA) is PepsiCo's beverage manufacturing, sales, and distribution operating unit. Now is the time to explore the opportunities of PBNA: what makes you unique makes us better. Fleet Mechanics play a key role in the success of our business by ensuring the reliability of our fleet and supporting the of safety our Drivers. Together we perform with purpose! What's different about Fleet Mechanic positions at PBNA? Great benefits package, pay, and incentives (including work boot allowance, uniforms, company provided PPE, and more!) World class tooling and ergonomics Fast-paced environment where you can work independently while still receiving coaching and direction when needed Task variety with opportunities to work on a wide range of equipment and repairs Ongoing training to help you grow your skills and advance your career Team culture that supports knowledge sharing and growth Clean facilities and a commitment to safety first Here is what it's like to be a Fleet Mechanic with PBNA: View our Job Preview Video As an experienced Fleet Mechanic, here's a bit more about what your job will be. Day to day you will: Work with a high degree of independence while performing PMs and repairs Utilize leading edge technology and programs including PM using voice application, Noregon diagnostics, Uptake predictive analytics, TAAS, and more! Leverage and grow your skills working on Pepsi's diverse fleet equipment including automobiles, trucks (light and heavy), vans and forklifts Perform advanced diagnostics across all OE platforms (Volvo, International, Freightliner, Maxon, electrical vehicles, Material Handling Equipment and more) Perform high level repairs such as, but not limited to, engine and driveline, after treatment and emissions, and safety systems Adapt and build repair and maintenance capability for alternative fuel applications such as electric vehicle, CNG, and B100 Diagnose failures of vehicles and disassemble, repair and reassemble parts as necessary Maintain documentation and records such as vehicle records and pre-trip checklists Answer service calls Support Pepsi's strong safety culture by adhering to all safety standards and procedures Be part of the team that maintains one of the largest fleets in North America

Job Description Duda Farm Fresh Foods, Inc. is a wholly-owned subsidiary of DUDA, established in 2006 to manage the company's legacy fresh produce operations. Capitalizing on a tradition begun in 1926 of growing healthy fresh fruits and vegetables, Duda Farm Fresh Foods offers year-round availability of a wide range of products packed under the Dandy brand. A full-service grower, packer, shipper, marketer, importer and exporter of farm fresh fruits and vegetables and fresh-cut vegetables, its operations are geographically diversified. The Florida-based corporation has production and shipping operations in Florida, California, Arizona, Michigan and Georgia with additional domestic and international locations. Duda Farm Fresh Foods is seeking a skilled Mechanic to join our Farm Shop team in Belle Glade, FL. This position plays a vital role in supporting our agricultural operations by ensuring all farm equipment and vehicles are operating safely and efficiently. Key Responsibilities: Diagnose mechanical issues and perform repairs on farm vehicles and equipment. Conduct regular inspections and preventive maintenance. Overhaul, adjust, and service engines, transmissions, hydraulic systems, and other mechanical components. Maintain accurate maintenance and repair records. Ensure compliance with safety standards and company policies. Operate shop tools and diagnostic equipment as required. Collaborate with team members and farm supervisors to meet operational needs. Qualifications: Proven experience as a mechanic, preferably in an agricultural or heavy equipment setting. Strong knowledge of mechanical, electrical, and hydraulic systems. Ability to read and interpret technical manuals and schematics. Skilled in the use of diagnostic tools and repair equipment. Must be dependable, self-motivated, and safety-conscious. Valid driver's license; CDL is a plus. Working Conditions: Full-time position Outdoor and indoor work environments. Physical demands include lifting (up to 80 lbs.), standing, bending, and working in various weather conditions. Language Skills: Proficient communication skills; Must be able to speak, read and write in English. Bi-lingual Spanish is preferred This position description is not to be construed as an exhaustive statement of duties, responsibilities, or requirements. Individual may be required to perform any other job-related instruction as requested by their department leader, subject to reasonable accommodation. This position description is not all inclusive and subject to change. All applicants must be able to pass a physical, drug test, and criminal background check. We expect and require the cooperation of all employees in maintaining a discrimination and harassment-free work environment. We offer an excellent benefit package as part of our total compensation including medical, dental, and vision insurance, 401K, flexible spending accounts, tuition reimbursement program, paid time off and much more. Duda is an equal opportunity employer. We offer a full benefit package, competitive wages, and career advancement. No agencies please. Powered by JazzHR HMwMDma2SX

Line of Business: Cement & White About Us: Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform preventative maintenance and repairs on terminal equipment and systems Troubleshoot mechanical issues to ensure safe and efficient operations Inspect and maintain pneumatic, hydraulic, and electrical systems Operate tools and machinery in accordance with safety standards Collaborate with team members to support terminal operations and minimize downtime What Are We Looking For Demonstrated mechanical aptitude and problem-solving skills Ability to read and interpret technical manuals and schematics Familiarity with industrial equipment and safety protocols Strong communication and teamwork capabilities Willingness to work flexible hours and respond to operational needs Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check Some positions require FMCSA regulated ongoing drug and alcohol testing Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level What We Offer $28.25 to $30.98 per hour Benefits through the Union for Medical, Dental, Vision and Pension Union paid vacation, sick leave and holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled

APPRENTICE TECHNICIAN We are seeking a motivated and reliable Apprentice Technician to join our dynamic team in the HVAC, Refrigeration, and Commercial Kitchen Equipment Repair industry. As an apprentice, you will gain hands-on experience, learn essential technical skills, and work alongside skilled professionals to become proficient in servicing, installing, and maintaining HVAC systems, refrigeration units, gas, steam, and electric. This individual must show growth within six months to one year before moving on to junior technician status. The Apprentice will be evaluated every three months and rotate between technicians to ensure diverse training. Key Responsibilities: Assist senior technicians with the installation, maintenance, and repair of HVAC, refrigeration, and commercial kitchen equipment Learn to troubleshoot and diagnose equipment issues using tools, meters, and specialized instruments Perform preventive maintenance tasks to ensure the proper functioning of equipment and systems Assist with system inspections, identify malfunctions, and provide recommendations for repairs or upgrades Maintain and organize equipment, tools, and spare parts inventory Keep accurate records of services performed, including diagnostic results, repairs, and parts used Adhere to safety guidelines and best practices when handling equipment, tools, and hazardous materials Participate in on-the-job training and attend formal training programs to develop technical knowledge and skills Communicate effectively with clients, answering questions and providing updates on repair or installation progress Assist in the preparation of estimates and work orders under supervision Support senior technicians in troubleshooting complex issues as experience is gained Requirements: High school diploma or equivalent. A strong interest in learning about HVAC, refrigeration, and commercial kitchen equipment repair Basic understanding of mechanical and electrical systems (training will be provided) Good problem-solving skills and attention to detail Ability to work in a physically demanding environment (lifting equipment, climbing ladders, working in confined spaces) Strong communication skills and the ability to work well as part of a team A valid driver's license and reliable transportation (some travel may be required) Ability to lift 50 - 70 pounds Willingness to commit to completing the apprenticeship program and pursuing a career in the trade Must be able to obtain any required fire watch and burn permits within 6 months of hire Benefits: Competitive pay with opportunities for increases based on performance and skills development Hands-on training and mentorship from experienced professionals Career growth opportunities within the company Health insurance with generous company contribution Dental, Life Insurance, Disability, and Vision 401K plan with employer match Vacation and sick days Paid holidays

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. PM MechanicPerforms preventative and predictive maintenance on facility machinery. Essential Functions Perform preventative and predictive maintenance on facility machinery. Troubleshoot mechanical/electrical/pneumatic systems using schematics and technical drawings. Repair equipment, fixtures, systems, conveyors and other equipment at facility as required. Lubricate, diagnose, and operate equipment. Work independently and with other team members to complete repairs timely and safely. Complete required daily paperwork, document parts and material usage. Maintain a clean and safe work area. May perform as a back up to production line worker. Understand and follow plant safety rules including safe lifting practices and safe machine operation. Personal Protective Equipment is to be used where required. Regular and predictable attendance is an essential function of the job. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Required to lift items up to 50 lbs throughout shift. Basic knowledge of Computerized Maintenance Mechanical System (CMMS), this includes experience with HMI's, work orders, etc. Experience with Microsoft Word, Outlook, Excel, etc. Team members need to provide their own tools, except in California locations where tools will be provided. Preferred Qualifications: 4 Years - Experience in Field or similar manufacturing environment 4 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma Preferred: Associate's Degree in Vocational Training in Mechanical, Electrical, Hydraulics, Pneumatics Technical School Certification in related field Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Job DescriptionBenefits: Bonus based on performance Company parties Competitive salary Employee discounts Free uniforms Health insurance Opportunity for advancement Vision insurance Job Summary We are looking for a skilled Mechanic to join our busy repair shop. As an Auto Mechanic, you will assist our customers by diagnosing and repairing issues with vehicles performance and function. As an Auto Mechanic, you must have an in-depth understanding of all vehicle systems and components. You will also be responsible for maintaining repair shop equipment, preparing cost estimates, and maintaining a welcoming environment. The ideal candidate is skilled in communicating with customers, able to explain vehicle issues clearly and concisely and provide valuable advice. Responsibilities Diagnose and repair vehicles coming into the shop Carry out routine vehicle maintenance tasks such as tire rotations, oil changes, and brake pad replacements Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes Create repair estimates and timelines and convey information to customers in an easy-to-understand manner Maintain accurate repair shop records and paperwork Ensure a high level of customer satisfaction and repeat business Qualifications High school diploma or GED is required Associate degree or completion of an automotive service technician training program is preferred Automotive Service Excellence/ASE certification or Society of Automotive Engineers/SAE certification is preferred Strong customer service and communication skills are required

Job Description Skyworks LLC is a family-owned and operated construction equipment rental company. Skyworks is a team inspired by a positive culture to build exceptional customer experiences. Our Hollywood branch needs both shop and road Mechanics. Duties and responsibilities for Mechanic: maintain the branch's equipment fleet diagnose and fix issues with equipment Qualifications for Mechanic: electrical and hydraulic experience experience repairing construction equipment valid driver's license Pay depends on industry experience. Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance #INDMECH #zr #LI-DNI

Job Details Lexus of Kendall - Miami, FLDescription Who We Are: Bean Automotive Group is a nationally recognized automotive group which champions Miami's rich automobile heritage. Our 670 associates, located throughout our 4 locations: Kendall Toyota, Lexus of Kendall, West Kendall Toyota and Lexus of West Kendall, make it our mission to deliver on every customer's expectation, one customer at a time! What We Offer: Our associates enjoy competitive compensation and benefit offerings, among the best in the industry, and some of which include: 3 weeks of Paid Time-Off per year. Paid Holidays. 401(k) Retirement Plan with 50% Employer Match. Paid Health, Gap, Life and AD&D Insurance. Eligible for Dental, Vision, Short-Term, Long-Term, Voluntary Life Insurance. Paid Volunteer Time-Off Program. Award-Winning Wellness Program and Healthcare Premium Incentives Employee Discounts. ASE certification reimbursement and paid continuing education program to further your career. Continued education, manufacturer hands-on and web-based training. Qualifications We presently have an employment opportunity for an Apprentice Technician in our Kendall Toyota operation. In this new role, the Apprentice Technician will complete training assignments to be able to safety operate shop equipment and repair automotive vehicles while on the job. Successful training completion would entitle a promotion to an Automotive Technician position. What are the day-to-day responsibilities? Performs quality vehicle service maintenance repairs with supervision from his Team Lead. Assists assigned Technician as needed. Performs safety inspections with the supervision of his Team Lead. Reports machinery defects or malfunctions to Management. Delivers customer cars to service stalls as requested. Operates all tools and equipment in a safe manner. Replenishes supplies in the Service Department. Picks-up parts from the Parts Department as directed. Attends training classes and departmental meetings. Position Requirements: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Ability to establish and maintain effective working relationships with employees. Ability to follow written and verbal instructions, including manufacturers' service specifications. Ability to communicate clearly and effectively, verbally and in writing. A valid Florida driver's license. Must maintain factory required training as well as local licensing requirements. Employment is contingent upon successful completion of a thorough drug and background screening to include MVR. Bean Automotive Group is an equal opportunity and drug free employer. All aspects of consideration for employment and employment with the Company are governed on the basis of merit, competence and qualifications without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, or any other category protected by federal, state, or local law.

Classification: Apprentice Technician Reports To: Service Manager The Apprentice Technician role is designed for individuals who are either currently enrolled in or have recently graduated from a technical school and have little to no prior work experience in the automotive industry. This position provides hands-on training under the supervision of experienced technicians while working towards OEM certifications and mastery of essential automotive repair and maintenance skills. Duties & Responsibilities: Assist experienced technicians in performing vehicle repairs and maintenance services in accordance with OEM standards. Learn and develop diagnostic skills to accurately identify vehicle issues. Perform basic services, including oil changes, tire rotations, brake inspections, and battery replacements. Maintain a clean and safe work environment in compliance with OSHA and dealership policies. Complete assigned training and obtain necessary OEM certifications as required. Follow dealership and manufacturer guidelines for documentation and repair order processing. Uphold high-quality workmanship and customer satisfaction standards. Adhere to safety procedures and use proper personal protective equipment (PPE).