Diesel technician jobs near me - 558 jobs

Job Posting End Date 01-05-2026 Please note the job posting will close on the day before the posting end date Perform maintenance/repairs on sedans, light/medium/heavy trucks, trailers and heavy work equipment and any attached equipment, and/or auxiliary equipment, which is part of the specialized vehicles, operated by the Company. The following list sets forth the principal duties required for the job. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. Job Description What You'll Do: Service and repair boom/pedestal assemblies of the Company's specialized equipment including troubleshooting equipment; inspect cables, chains and rods; inspect sheave liners; inspect and repair monitoring system; inspect fiberglass components; inspect turntable; remove and replace reduction gearboxes; inspect pins, bushings and bearings; and load test boom assemblies. Service and repair hydraulic systems including troubleshooting the hydraulic system; inspect, remove and replace hydraulic pumps, motors, valves, cylinders and the accumulator; and remove and replace swivel collector block. Service and repair heating and ventilation systems including diagnose A/C unit problems; conduct pressure test on A/C unit; check for leaks using appropriate devices; check internal system controls; replace compressor; service A/C clutch assembly; and replace compressor seals, refrigerant hose, condenser assembly, receiver dryer, and evaporator core. Troubleshoot and repair winch assemblies. Service and repair the steering system of Company vehicles including repair power steering pump and manual steering gearbox. Service and repair the air brake systems of Company vehicles including air compressors, air brake chambers, and air control valves. Service and repair hydraulic and electric braking systems including inspect and repair master cylinder; test power unit and vacuum supply; inspect power boost system; repair power brake system; and service and repair antilock brake system. Inspect and service differentials and power dividers and transmission assemblies of Company vehicles including manual clutch, manual transmissions and transfer cases, transaxles (front-wheel-drive), and automatic transmissions. Service and repair the fuel and exhaust systems including computer control system; test and repair diesel fuel pump; inspect and service intake and turbo system; service and repair fuel injection system (gas/diesel); and inspect and service governors. Assist others in the diagnosis of more complex problems. Operate Company vehicles and associated equipment and perform duties incidental to the operation of such equipment. Maintain tools, equipment and work area in a clean and orderly condition. Maintain records and submit reports as required. Attend and participate in training as assigned and assist in the training of other employees. Perform less skilled work as assigned. Report irregularities and abnormal conditions. Assist employees of equal or higher classification. Direct the work of employees assigned to assist. What We're Looking For: Education: High school graduate or GED required. Experience: At least 2 years of strong automotive mechanical diagnosis with hydraulic and diesel repair experience. Graduation from an automotive trade school with diesel engine experience is highly desirable. Licenses/Certifications: Must possess and maintain a valid state driver's license. Must obtain Class A CDL within 12 months of entry date into the Fleet Technician B classification or vacate the job classification. Must obtain Fluid Power Society Certification and two (2) applicable ASE certifications within 24 months of entry date or vacate the current job classification. Other Must Haves: These are additional expectations for the job and could include specific work experience, license / certifications, preemployment testing, expectations about travel, shift work, etc. Must qualify through demonstration, examination and/or performance appraisal as determined by the Company. Must exhibit competency and aptitude in the fundamentals and mechanics of vehicle maintenance and repairs. Must become familiar with and have the ability to operate the computer systems utilized by the Fleet Services organization. Must acquire within such time frame as determined by the company, the qualifications necessary to perform the duties of the Fleet Technician A, or vacate the current job classification. Successful completion of the Tuff Tech pre-employment placement test is required for this position. For Fleet Techs that support Transmission, travel of 80% - 100% may be required. Shift work may be required PHYSICAL DEMANDS: List any physical demands required for this job: Work at heights - climbing ladders and on/in large trucks and equipment Frequent use of hand tools including various heavy equipment for repairs, ability to grasp, push, pull Ability to lift up to 100 pounds, working in awkward positions, working overhead Frequent walking, standing on concrete and occasionally in rough terrain Ability to operate trucks and heavy equipment Fleet Technician A: MINIMUM REQUIREMENTS: Education: High school graduate or GED required. Experience: Minimum of 18 months of satisfactory work experience as a Fleet Technician B or the equivalent as determined through demonstration, examination and/or performance appraisal as determined by the Company. Licenses/Certifications: Must possess and maintain a valid state driver's license, including a Class A CDL. Must possess the following certifications: Fluid Power Society Certification and any two (2) applicable ASE certifications listed below:Applicable ASE Medium/Heavy Truck Certifications: Brakes, Drive Train, Electrical Systems, Suspension & Steering, Diesel Engines, Air Conditioning. OTHER REQUIREMENTS: These are additional expectations for the job and could include specific work experience, license / certifications, preemployment testing, expectations about travel, shift work, etc. Must qualify through demonstration, examination and/or performance appraisal as determined by the Company. Must exhibit competency and aptitude in the fundamentals and mechanics of vehicle maintenance and repairs. Must become familiar with and have the ability to operate the computer systems utilized by the Fleet Services organization. Successful completion of the Tuff Tech pre-employment placement test is required for this position. For Fleet Techs that support Transmission, travel of 80% - 100% may be required.6. Shift work may be required PHYSICAL DEMANDS: List any physical demands required for this job Work at heights - climbing ladders and on/in large trucks and equipment Frequent use of hand tools including various heavy equipment for repairs, ability to grasp, push, pull Ability to lift up to 100 pounds, working in awkward positions, working overhead Frequent walking, standing on concrete and occasionally in rough terrain Ability to operate trucks and heavy equipment Where You'll Work: Columbus Transmission Service Center (On-Site) $33.13/hour - $37.11/hour #LI-Onsite #AEPCareers Note: This position is posted in a range. The final grade and compensation offered will be based on the successful candidate's education, experience, and relevant skills. At AEP, we're more than just an energy company - we're a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you! Compensation Data Compensation Grade: U025-107 Compensation Range: $33.13 - $35.12 The Physical Demand Level for this job is: H - Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work. Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply. Preference will be given to candidates who can work in any of the CannonDesign offices located in Buffalo, NY, Chicago, IL, Boston, MA, Dallas, TX, and Pittsburgh, PA. Get inspired by our engineers in action! Check out how we celebrated Engineers Week 2025 and what makes our team exceptional - LINK ABOUT THE ROLE You will be a member of our multi-disciplinary team and will work under the direction of a licensed engineer. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. HERE'S WHAT YOU'LL DO Perform and direct design of ductwork, piping and equipment selection for HVAC systems independently on assigned projects. Complex projects could be under the supervision of a professional engineer. As necessary assist with Plumbing and Fire Protection Designs. May supervise or provide project management direction within the mechanical discipline to include the monitoring of project progresses and project budget. Calculate heating, cooling loads, layout, design ductwork, and piping using energy modeling software. Prepare Revit/BIM modeling of construction drawings of HVAC systems from schematic design to construction administration phases including layout, sketches and detail drawings as required. As necessary perform Revit/BIM modeling for plumbing and fire protection systems. Edit specifications relating to existing or new projects. Independently research as need arises and respond to emergent issues. Specify mechanical equipment such as boilers, chillers, and air handling units. Review shop drawings for compliance of specifications and contract documents. Interface effectively with clients and members of the project team, attend Owner, Architect, Construction Administration (OAC) meetings with an understanding and focus on the project budget. Respond to RFI's and review of change orders in the preparation of construction documents. Conduct job site visits to verify existing conditions and observe construction progress. Attend and participate in construction meetings. Site visits frequently require a physical walk-through of site. Coordinates work activities on specific projects with several persons with various levels of capability; participates in business development and marketing activities. Perform other duties as assigned. HERE'S WHAT YOU'LL NEED Bachelor or Master's degree in Engineering required. Bachelor or Master's degree in Engineering from an ABET accredited program preferred. Minimum of 6 years of related experience required. Current PE in the United States preferred. LEED accreditation preferred. Must possess a working knowledge and experience, while still acquiring higher level knowledge. Excellent verbal and written communication skills. Able to effectively handle multiple projects. Experience in computer applications for engineering design programs (i.e. Revit, Trane Trace or Trane 3D Plus) required. The salary range for this position to be filled in the Buffalo, NY office is $76,190 to $95,190 annually. This salary range is the range we believe is the anticipated range of possible base compensation at the timing of the posting. We may ultimately pay more or less than the anticipated salary range for the position. Employees may be eligible for discretionary bonuses. We offer a full benefit package including medical, dental and vision coverage and flexible spending account options and voluntary insurances. We have paid time off, flex-time schedules, remote work options and a 401k plan and employee perk programs. For a general overview of our benefits, please visit our careers page at ********************************************** Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. Get inspired by our engineers in action! Check out how we celebrated Engineers Week 2025 and what makes our team exceptional - LINK ABOUT OUR FIRM CannonDesign is a design practice where strategy, experience, architecture, engineering, and social impact converge. We don't just dream up solutions - we create and bring them to life in ways to solve some of the biggest challenges facing our clients and the society. At the heart of everything we do is Living-Centered Design, a bold commitment to using our talents to not just improve the world but to truly reshape it for the better. It's more than a philosophy - it's who we are, and it drives us to make a meaningful, lasting difference every day. ABOUT WORKING HERE We are relentless in our pursuit of client adoration (not simply satisfaction). Consistent delivery of the best service is what we are about. We are committed to ensuring our practice provides equal opportunities for all employees, as we strive to connect with communities around us and focus on the future of design. We support equity, diversity, and inclusion efforts that benefit all employees through the leadership of our DEI Council, our Employee Resource Groups which are open to everyone, and other community initiatives. We're about communication and transparency here. If you want to talk to someone about an idea you have, or a challenge that needs addressing, we're ready for you. CannonDesign is an Equal Opportunity Employer. CannonDesign is committed to maintaining a work environment that is free from any and all forms of unlawful discrimination and harassment. It is therefore the firm's policy to prohibit discrimination and harassment against any applicant, CannonDesign employee, vendor, contractor, or client on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by applicable law. It is also CannonDesign's policy to prohibit any and all forms of retaliation against any individual who has complained of harassing or discriminatory conduct, or participated in a firm or agency investigation into such complaints. Please note that candidates can only apply to our positions on our company Careers site. It's not uncommon for scammers to create positions that look legitimate on other sites; never enter your information or apply for CannonDesign positions on any platform. Should an issue arise that you feel we should be aware of, please contact us. As a condition of employment, all employees are expected to complete mandatory training, including compliance training, within required timeframes and adhere to our internal policies and our Code of Conduct.

SummaryAt GE HealthCare, our machines, our software, our solutions, our services, and our people make a genuine difference to medical professionals and patients all over the world. That's because we never lose sight of what healthcare really needs-the human touch. In this role, the Biomedical Technician Apprentice will respond to service calls to evaluate, diagnose, perform repair and planned maintenance (PM) on basic biomedical equipment and drive customer satisfaction through Service Excellence.Job Description RESPONSIBILITIES • Under supervision, evaluate basic customer biomedical equipment issues, implement appropriate repairs; as assigned, perform planned maintenance (PM), safety, environmental inspections and maintain effective customer relations. Follow appropriate GE policies, procedures, hospital protocol and complete necessary documentation, as guided. • Maintain daily communications with customers as directed, to ensure resolution and proper follow-up, leading to customer satisfaction. As instructed, implement GE/customer facility contract, supporting business goals and objectives. • May assist more experienced technicians on progressive repairs and resolution. Work as a member of local team to provide efficient service delivery to all accounts within assigned area. • Document all repair actions and submit reports/summaries according to schedule. Maintain approved parts inventory. Manage vendor's service delivery processes in compliance with GE policies, as instructed. • Ensure proper care of spares, tools and test equipment and ensure calibration. Enhance and maintain technical knowledge of current standards, codes, and procedures regarding safe and effective use of medical equipment formal instruction. • Meet Health and Human Services, as well as Environment Health and Safety requirements. • Complete all planned Quality and Compliance training within the defined deadlines. Identify and report any and all customer quality or compliance concerns immediately to the Quality Organization. • Aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position. REQUIRED QUALIFICATIONS • AS, BS, MS degree, military education, certificate program, current student with less than 12 months from completion OR High School Diploma/GED with 6 months experience servicing electronic, IT or mechanical equipment. • Previous experience and/or course work in which you have successfully interpreted schematic diagrams and performed troubleshooting and planned maintenance on basic diagnostic imaging or electronic equipment following current standards, code, and procedures to ensure safe and effective operation of those devices. • Must have reliable transportation and a valid driver's license. • Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. DESIRED QUALIFICATIONS • Previous experience interpreting schematic diagrams and perform effective repair and planned maintenance on basic biomedical or electronic equipment. • Ability to develop and maintain good customer relations. • Analytical and communication skills with the ability to communicate technical issues to the customer in an easy-to-understand manner. • Experience interfacing with both internal team members and external customers as part of a solution based service process. • Experience diagnosing and repairing mechanical, electromechanical, and/or electronic equipment in the electronic field - resulting in knowledge of electronic digital circuitry and understanding of electronic and electro-mechanical devices. • Change agent and process oriented. • Special Physical Requirements: Candidate must be able to lift, carry, push, and pull up to 35 lbs. unassisted and frequently bend, stoop, twist, climb, crouch/squat, kneel/crawl, sit and stand for long periods of time. Candidate must also be able to reach at, above and below shoulder level, flex/extend neck and have good hand and finger dexterity. Specific vision abilities required by this job may include color, close vision, distance vision, peripheral vision, and depth perception. • You may not relocate more than 30 miles from your current location without approval from your manager. • Local candidates strongly preferred. • The successful applicant must comply with GEHC's standard background check, including a post-offer drug test. In addition, during employment, the employee must comply with all customer access policies, including but not limited to obtaining and/or providing proof of required immunizations, and additional drug tests or background checks (including a federal government background check if assigned to support a contract with the federal government). For U.S. based positions only, the pay range for this position is $44,000- $66,000 . It is not typical for an individual to be hired at or near the top of the pay range and compensation decisions are dependent on the facts and circumstances of each case. The specific compensation offered to a candidate may be influenced by a variety of factors including skills, qualifications, experience and location. In addition, this position may also be eligible to earn performance based incentive compensation, which may include cash bonus(es) and/or long term incentives (LTI). GE HealthCare offers a competitive benefits package, including not but limited to medical, dental, vision, paid time off, a 401(k) plan with employee and company contribution opportunities, life, disability, and accident insurance, and tuition reimbursement. We expect all employees to live and breathe our behaviors: to act with humility and build trust; lead with transparency; deliver with focus, and drive ownership - always with unyielding integrity. Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you'd expect from an organization with global strength and scale, and you'll be surrounded by career opportunities in a culture that fosters care, collaboration and support. Additional Information GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees. Relocation Assistance Provided: No

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Mobile Diesel Heavy Duty Tech II - DOT Management Level Individual Contributor Flexible Work Option Can work remotely but need to live in the specified city, state, or region Travel % Yes 100% of the time Work Shift Variable Compensation Hourly base pay rate is $26.06 - $39.13/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description * If you have any questions or to connect with a recruiter while your application is being reviewed, please Text DFS2 to ************ * Fleet Services - A Cox Automotive Company keeps your fleet moving! Headquartered in Indianapolis, Fleet Services by Cox Automotive has grown to become one of the largest fleet maintenance companies in the country. Fleet Services is the leading provider of on-site mobile maintenance and repair services nationwide, offering mobile on-site fleet service for light medium, and heavy-duty trucks and trailers. Fleet Services also services customers utilizing its 50+ nationwide service centers; each offering accident repair, painting, refurbishment, and heavy mechanical repair. We are supported by a 24/7 in-house call-center and provide scheduled maintenance services and unscheduled services to fleets anywhere, anytime. JOB SUMMARY Fleet Services is currently hiring a Heavy-Duty Technician to join our team to support the future growth of the Company. If you're looking for a new place to call home, we would love to talk with you. The Heavy-Duty Technician will be responsible for maintenance and repair of a variety of trucks and equipment involving mechanical, electrical, hydraulic, and diesel systems. Responsibilities * Maintain and repair a variety of rental equipment involving mechanical, electrical, hydraulic, and diesel systems. * Read diagrams and schematic drawings and service manuals on equipment. * Inspect, troubleshoot, and repair heavy equipment. * Repair electrical and mechanical components * Maintain electrical, pneumatics, hydraulics and mechanical knowledge via on-going training, industry workshops and technical reading. * Carry out preventative maintenance program for mobile equipment. * Observe competitive activities. * Contribute to company image and reputation. * Manage and maintain assigned tools and equipment. * Maintain and follow driving guidelines for assigned company vehicle. * Identify and request replacement parts to perform repairs. * Complete all paperwork thoroughly and in a timely fashion. * Understand and comply with all Safety and Environmental requirements. * Perform all other duties as required by Supervisor within the physical constraints of the job. Qualifications * 3-5 years' experience in heavy equipment repair industry * Extensive Knowledge or all aspects of heavy equipment * Knowledge of Gas and diesel engines, transmissions, hydraulics, electrical, etc * Familiar with hydraulic and electrical schematics * Able to perform tasks independently. * Must have own hand tools. * Must have basic computer skills. * High School diploma or Equivalent Skills & Abilities * Understand the implications of new information for both current and future problem-solving and decision-making. * Ability to lift, bend, climb, stand, and walk for long periods of time; ability to perform moderately heavy laboring work * Ability to exert oneself physically over long periods of time without tiring, which may include performing repetitive tasks. * Communicates information (for example, facts, ideas, or messages) in a succinct and organized manner. Engages in effective two-way communication with individuals and groups. * Ability to determine the type of tools and equipment needed. * Ability to accurately judge which of several objects is closer or farther away from the observer, or the distance between an object and the observer. * Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. WHY FLEET SERVICES BY COX AUTOMOTIVE? * $35.00 to $38.00+ per hour based on experience and location. * Safety Boots & Safety Glasses reimbursement * Uniforms provided with laundry service where available. * Technical training provided to advance your career. Dedicated career path - 'Over 50% of our front-line managers are promoted from within'. Benefits Employees are eligible to receive a minimum of 6.67 hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship.

Ricart Automotive is the nation's largest single-point auto mall, with over 67 acres and outstanding employees who are passionate about their contribution to the development and growth of our company. We are driven, we are trusted, we are sharp, we are welcoming and we are ONE team! We offer our customers a one-stop shopping experience with seven new car brands, a nation-leading pre-owned showroom, an industry-leading consumer-friendly parts and service department, and the oldest Harley Davidson dealership in the country. We are a third-generation family-owned business that takes pride in providing an outstanding experience to all of our family of employees and customers. Thank you for being a part of the Ricart family! What We Need From You Job Duties and Requirements: Diesel performance and engine repair Gas performance and engine repair EV Diagnosis and repair (willing to train) Complete MPI inspection for customers, including estimates and explanation Test drive vehicles with customers to evaluate noise, driveability, and vibration concerns Repair vehicles based on diagnosis and customer requests Test drive vehicles after repairs have been completed to ensure customers' complaints have been resolved. File appropriate dealership and manufacturer-required documentation on each repair Keep up to date on all manufacturer information and training Return the vehicle to the appropriate location, ensuring the vehicle is locked, numbered location is updated, and wiped off/cleaned accordingly. Must have a valid drivers license and meet company motor vehicle report standards 3-year Flat rate technician experience Knowledge and ability to use IDS and FDRS diagnostic tools efficiently You must be an elite communicator Essential Job Functions: Certain manufacturer certifications are required Diesel experience preferred Must be able to work in varying temperatures and noise levels Must be able to lift 75lbs Ricart Automotive is an equal opportunity employer.

Our client is seeking an experienced Heavy Truck & Equipment Technician to join their team in Columbus, Ohio. This role is ideal for a highly skilled technician with mechanical and diagnostic expertise who can handle both shop repairs and field service calls. From Class 8 trucks to dozers, excavators, loaders, and hydraulics, you'll work on some of the toughest equipment in the industry. A CDL license is highly preferred to support road testing and field operations. Responsibilities Diagnose, repair, and maintain heavy trucks, dozers, loaders, excavators, and other construction equipment Troubleshoot engines, transmissions, hydraulics, electrical systems, brakes, and suspensions Perform field service calls to complete on -site repairs with minimal downtime Use OEM diagnostic software and tools (Cummins Insite, CAT ET, Detroit Diesel DiagnosticLink, John Deere Service Advisor, Allison DOC) Document work performed, parts used, and service outcomes Road test trucks and equipment to confirm repairs and compliance Collaborate with the parts and service team to ensure efficient workflows Follow all safety standards and company policies Qualifications 3-5 years of experience in heavy truck or heavy equipment repair Strong diagnostic ability with OEM diagnostic software and electronic service tools CDL Class A or B license highly preferred Welding and fabrication experience a plus Valid driver's license with a clean record OEM certifications (Freightliner, Western Star, CAT, Komatsu, John Deere, Volvo, etc.) strongly preferred Benefits (customize per employer) Competitive pay based on experience Health, dental, and vision insurance Paid time off + holidays 401(k) with employer match Ongoing OEM training and certifications PPE, uniforms, and specialty tools provided About SourceLine SourceLine is a flat -fee direct hire recruiting partner specializing in RV, Marine, Powersports, Heavy Truck, and Heavy Equipment. We help dealerships, service centers, and operators hire prescreened candidates who are ready to interview - without the high commissions of traditional agencies. Our U.S. -based team uses targeted outreach and industry knowledge to connect you with the right talent.

About PURIS: PURIS operates across North America as the largest independent trenchless rehabilitation provider with 900+ employees dedicated to building lasting infrastructure with smart, sustainable resource management. The PURIS Family of Companies provide trenchless renewal solutions in the water, wastewater, and stormwater markets. Our environmentally friendly solutions work within the existing infrastructure to save time, minimize environmental impact, and cause fewer community disruptions. With an unrivaled toolbox of technologies, PURIS has the RIGHT solution for each project. Job Summary: The Mechanic will complete all repairs, preventative maintenance, programmed repairs and facility repairs to be in compliance with equipment/ facility reliability and standards. Maintenance mechanic will report any foreseeable problems to the Shop Manager. Essential Job Accountabilities: General mechanical knowledge including pumps, hydraulics and electrical Basic welding knowledge and experience Good assembly skills Experience with preventative maintenance programs Basic intermediate computer skills Experience with work order execution Has own basic tools Experience with safety training Facility repair experience. Keep up with training and process needs, requirements. Problem solve and root case diagnosis Communicates well and works in clean orderly manner Diagnose and manage employees projects Schedule repairs and maintenance of equipment Other duties as assigned Work afternoon shift and overtime when available. Education: High school diploma or equivalent Trade education in industrial mechanics (preferred) Additional Requirements/Skills: Must have a minimum of 3 years of experience with industrial mechanical repairs. Heavy truck repair experience. Must have Preventative Maintenance system experience. Possess own basic hand tools. Must be able to work in closed and open environments. Class C drivers license Experience with boiler/steam truck maintenance (preferred) Experience with vac truck maintenance (preferred) Benefits: Comprehensive and competitive benefits package that includes medical/Rx, dental, vision, critical illness and accident insurance, and short-term disability. Several 100% company-paid benefits including: Life Insurance Long-term disability Employee assistance program Bonus program 401(k) savings plan with company match Generous PTO 10 paid holidays Tuition reimbursement Career advancement opportunities PURIS and our Family of Companies are an Equal Opportunity/Affirmative Action Employer. All qualified applicants are encouraged to apply without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, protected veteran status or status as an individual with a disability.

About PURIS: PURIS operates across North America as the largest independent trenchless rehabilitation provider with 900+ employees dedicated to building lasting infrastructure with smart, sustainable resource management. The PURIS Family of Companies provide trenchless renewal solutions in the water, wastewater, and stormwater markets. Our environmentally friendly solutions work within the existing infrastructure to save time, minimize environmental impact, and cause fewer community disruptions. With an unrivaled toolbox of technologies, PURIS has the RIGHT solution for each project. Job Summary: The Mechanic will complete all repairs, preventative maintenance, programmed repairs and facility repairs to be in compliance with equipment/ facility reliability and standards. Maintenance mechanic will report any foreseeable problems to the Shop Manager. Essential Job Accountabilities: General mechanical knowledge including pumps, hydraulics and electrical Basic welding knowledge and experience Good assembly skills Experience with preventative maintenance programs Basic intermediate computer skills Experience with work order execution Has own basic tools Experience with safety training Facility repair experience. Keep up with training and process needs, requirements. Problem solve and root case diagnosis Communicates well and works in clean orderly manner Diagnose and manage employees projects Schedule repairs and maintenance of equipment Other duties as assigned Work afternoon shift and overtime when available. Education: High school diploma or equivalent Trade education in industrial mechanics (preferred) Additional Requirements/Skills: Must have a minimum of 3 years of experience with industrial mechanical repairs. Heavy truck repair experience. Must have Preventative Maintenance system experience. Possess own basic hand tools. Must be able to work in closed and open environments. Class C drivers license Experience with boiler/steam truck maintenance (preferred) Experience with vac truck maintenance (preferred) Benefits: Comprehensive and competitive benefits package that includes medical/Rx, dental, vision, critical illness and accident insurance, and short-term disability. Several 100% company-paid benefits including: Life Insurance Long-term disability Employee assistance program Bonus program 401(k) savings plan with company match Generous PTO 10 paid holidays Tuition reimbursement Career advancement opportunities PURIS and our Family of Companies are an Equal Opportunity/Affirmative Action Employer. All qualified applicants are encouraged to apply without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, protected veteran status or status as an individual with a disability.

BENEFITS EFFECTIVE ON FIRST DAY OF EMPLOYMENT!! Maintains diesel equipment operation by completing inspections and preventive maintenance requirements; correcting vehicle deficiencies; making adjustments and alignments; keeping records. THIS POSITION IS OFFERING A $10,000.00 SIGN ON BONUS PAID OUT IN INCREMENTS OVER TIME! Determines vehicle condition by conducting inspections and diagnostic tests; identifying worn and damaged parts. Keeps equipment available for use by completing preventive maintenance schedules; installing component and part upgrades Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; making adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units. Verifies vehicle performance by conducting test drives; adjusting controls and systems. Complies with federal and state vehicle requirements by testing engine, safety, and combustion control standards. Maintains vehicle appearance by cleaning, washing, and painting. Maintains vehicle records by annotating services and repairs. Keeps shop equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs. Contains costs by using warranty; evaluating service and parts options. Keeps supplies ready by inventorying stock; placing orders; verifying receipt. Updates job knowledge by participating in educational opportunities; reading technical and regulation publications. Enhances maintenance department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

Skyworks LLC is a family-owned and operated construction equipment rental company. Skyworks is a team inspired by a positive culture to build exceptional customer experiences. Our Columbus branch needs Mechanics. Duties and responsibilities for Mechanic: maintain the branch's equipment fleet diagnose and fix issues with equipment Qualifications for Mechanic: electrical and hydraulic experience experience repairing construction equipment valid driver's license Pay depends on experience. Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance #INDMECH #zr #LI-DNI

SIGN ON BONUS- $1,000 (Paid out after 90 days of employment) Who we are: America's Auto Auction is a rapidly growing company headquartered in Carmel, IN. We are one of the nation's premier auto auction groups with sites across 19 states. America's Auto Auction has developed a platform built on lasting relationships and superior service that leverages the best of vehicle offerings. America's Auto Auction - Columbus Fair is looking for an outstanding Auto Mechanic. The Mechanic is responsible for diagnosis and repair of all vehicles to ensure that they are up to safety standards. Ensure that vehicles are ready for sale. The Mechanic exhibits superior customer service at all times. What You Will Do: • Provide efficient and courteous service to all customers at all times. • Always exhibit ‘hands on' and direct approach with customers. • Diagnoses, coordinates inspection, repair and service of mechanical, electrical and electronic systems and components of cars, vans and light trucks. • Carries out complex engine tune-ups, diagnose complicated faults or malfunctions to determine extent of repairs required. • Adjusts, repairs or replaces parts and components.. • Oversee the cleaning, lubricating and other routine maintenance work on equipment. • Maintain clean, orderly work area free of safety hazards. • Work well independently as well as a team player • Timely communication of issues that may be deemed as detrimental to the success of operations to Management. • Performs other duties as necessary Here's a taste of the benefits we offer: • Medical • Dental • Vision • FSA • 401K • Short Term Disability • Long Term Disability • Life Insurance • Accidental Death and Dismemberment • Accident Insurance • Critical Illness • Hospital Indemnity • Employee Assistance (EAP) • Paid Holidays • Paid time off Requirements Qualifications: • Must be at least 21 years of age • Must possess a valid driver's license • Environment: The environment of the Mechanic involves working at the Auction representing the company upholding the highest standards of customer service. Those working in this position are subject to temperature changes, all types of weather conditions, elevated noise levels and at times fumes and odors associated with vehicle exhaust at times America's Auction is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Salary Description 18-27/hr

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 1 year of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: Evening shift Night shift Weekly day range: Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

Do you enjoy servicing vehicles and have a basic knowledge of tools and major vehicle parts? Are you looking for the right position with a company who recognizes dedication and hard work? Russell Tree Experts is searching for a Mechanic who will join our team of dedicated mechanics, ready to learn, and ready to help maintain our extensive on-road and off-road fleet. Daily Job Activities: Servicing small, medium, and large trucks - including changing oil, greasing points etc. Servicing off-road vehicles and other items including loaders, trailers, forwarders and more. Changing tires, cleaning the shop area, washing trucks and/or equipment Desire to learn welding and fabrication (if needed) to assist with light fabrication projects in shop. Field-based vehicle repairs with senior mechanic. Hours: Monday through Friday, 7 AM to 3:30 PM, occasional weekends or evenings Education and Experience Requirements: High School Diploma or GED Required; Auto or Diesel Maintenance degree or certificate preferred. 1-3 years Auto, diesel, or heavy equipment maintenance experience required Minimum Requirements: Must be at least 18 years of age Legally eligible to work in the United States. Able to perform physical requirements of the position including frequent bending, moving, and lifting up to 75 pounds. Desire and ability to learn Mechanical aptitude Strong work ethic Safety focus What we offer: Competitive compensation based on experience. Comprehensive health insurance (we pay 100% of employee-only premiums!), SIMPLE IRA retirement plan with a dollar for dollar company match, paid holidays, PTO, paid holidays, and continuing education days. All employee benefits are offered in accordance with applicable State and Federal regulations. Russell Tree Experts was founded in 2005, is family-owned and based in Westerville, Ohio. We maintain a Drug-Free and tobacco-free workplace. Russell Tree Experts is proud to be an Equal Opportunity Employer.

/ Business Unit Push for better, join the AA. As our Roadside Rescue Mechanic, you'll go the extra mile for our members. Anything can happen whilst driving, but we are the AA and we get everyone back on the road safely so the show can go on. In return, we'll go the extra mile for you, with training, support and opportunities for development. Take a look at all things The AA at our You Tube channel: The AA - YouTube Base Salary: £37,152 plus £3,598 location allowance* The base salary is achieved on a working week on average of 40 hours. Top performers can earn upwards of OTE £60,000! * Eligibility for Location allowance is based on your home postcode * Start and finish on your driveway, (paid from the moment you get in your van to the moment you get home). * Sign on locations also available for discussion * Each year, choose your standby hours preferences to suit your lifestyle and work life balance * Bring your best self and we provide the rest, including; Van, full Uniform, Boots, and the best available equipment! * Free breakdown cover from day one * 23 days holidays (increases with service) * Up to 7% company pension contribution * A famous brand that our customers love with industry leading training * Dedicated Employee Assistance Programme and a 24/7 remote GP service for you and your family This is the job More importantly you'll be the friendly face of the UK's largest motoring organisation. To our members, you're the superhero. Ready for anything, you'll be there for them, anytime, anywhere and in any weather. You'll get their day moving again, forging confidence for drivers now and for the future. What will I be doing? You'll be: * A communicator: You are our master of diagnostics and fundamental in delighting your customers! You're comfortable sharing your knowledge and information in a way that your customers understand the situation and feel safe that their needs will be taken care of * A self-starter: You will be content working independently, as well as collaborating as part of a team, driving to different locations in all weathers * A fixer/problem solver: You will revel in utilising your technical expertise to solve a variety of issues. Whether that's fixing the vehicle by the roadside or recovering the vehicle to a garage, you are the solution bringer and enable your customer to get on with their day What do I need? You'll need: * NVQ3 in Vehicle Maintenance and Repair, or equivalent qualifications with appropriate experience * It's essential that you have a full category B driving licence, with 6 points or less * To be happy working shifts, which could include evenings, weekends and Bank Holidays Additional information For more information on our full benefits package, including discounted home and motor insurance, take a look at our website, Taking care of you - AA Careers (theaacareers.co.uk) As a valued team member, you'll have access to a range of fully supported development programmes, designed to help you progress your career with us. Whether you're looking to grow in your current role, or learn new skills and take on greater responsibilities, we will help you build the career you're looking for. Here at the AA we understand diversity and value the difference this brings to our culture and our customers. We actively seek people from diverse backgrounds to join us and become part of an inclusive company where you can be yourself, are empowered to be your best and feel like you truly belong. You can apply today with or without a CV (if you wish to apply without a CV then please list your most recent experience along with your qualifications on the application form) by clicking on the link below and filling out a short application form. Your application will then be reviewed before we arrange an online interview assessment. As part of the onboarding process, we complete several pre-employment checks including work reference, credit and criminal record checks. Ready for anything? Apply Today

Job Description JOB FUNCTION: This will be entry-level position for a person with good basic mechanical skills. Must be capable of learning and developing the necessary skills to perform the job adequately. ESSENTIAL FUNCTIONS: 1. Performs PM Inspections. 2. Performs Post Trip Inspections. 3. General repairs such as clutch and brake adjustments, lights and electrical repairs and tire placement with supervision. 4. May be required to work temporarily at field locations maintaining/repairing equipment, under mentorship 5. Performs other duties as directed. QUALIFICATIONS: 1. High school education acceptable. 2. Specific exposure to an equipment or maintenance environment. 3. Knowledge of basic hand tools for general equipment repair. 4. Equipment systems experience a plus. 5. Must have effective oral and written communications effective listening skills, and ability to interact with others. 6. 0-3 years of diesel shop experience acceptable.

This role can be based in Anchorage (ANC), Chicago (ORD), Miami (MIA), New York (JFK), LAX (Los Angeles) or CVG (Cincinnati/Northern Kentucky). Candidates must be local to one of these areas or willing to relocate. Relocation assistance may be provided. Inspect, modify and repair aircraft at the maintenance base and remote locations. Troubleshoots technical discrepancies and executes repairs of company aircraft. Provides guidance to the entry level mechanics/on site contract mechanics on basic tasks and troubleshooting. Proficient in the use of electronic test equipment, voltage/amperage measuring, recording devices and navigation of troubleshooting equipment. Responsibilities * Troubleshoot technical discrepancies and execute repair of company aircraft * Accomplish aircraft inspections per company procedures * Proficient in use of electronic test equipment, voltage or amperage measuring, recording devices and navigation troubleshooting equipment * Ability to read and interpret blueprints, drawings, schematics and technical orders * Inspect and assist in maintenance of company equipment and tooling * Work as a member of a team that will interface with contract maintenance personnel * Follow safety measures, good shop practices and cleanliness standards * Communicate discrepancies to Maintenance Control department found during inspections and follow directions to troubleshoot and repair faulty conditions * Ensure that all aircraft documentation is completed accurately per company and FAA procedures prior to aircraft departure * Providing guidance to mechanics on advanced tasks * Organize daily tasks and coordinate inspections/repair of aircraft * Coordinate materials and tooling requirements for projected work for entire shift * Perform Manual and Aircraft parts inventories as required * Assist other company departments to ensure on-time departure of company aircraft * Additional duties assigned Qualifications * High School Diploma or equivalent * Minimum 7+ years of transport category aircraft maintenance experience (Boeing series aircraft - preferred) 737,777 747-400, 747-800 Gen Fam with RII authorization * Unrestricted engine run qualifications on 737, 777 and 747 aircraft * Formal training on advanced systems/avionics on 737, 777, 747 aircraft Qualifications continued: * Must possess valid passport and be able to travel for AOG recovery and special projects regularly * Bore scope qualified on CFM, Pratt Whitney or GE-90 engines * Valid Federal Aviation Administration (FAA) Airframe and Powerplant Certificate Skills: * Must be able to read, write, fluently speak and understand the English language * Strong analytical, interpersonal, verbal and written communication skills * Working knowledge of Microsoft software and in use of digital manuals * Strong work ethic and organizational skills * Must be able to work in variable weather conditions * Ability to lift parts and equipment * Able to work rotating schedules to include weekends, nights and holidays Financial offer within the stated range will be based on multiple factors to include but not limited to location, relevant experience/level and skillset. The Company is an Equal Opportunity Employer. It is our policy to afford equal employment opportunity to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, citizenship, place of birth, age, disability, protected veteran status, gender identity or any other characteristic or status protected by applicable in accordance with federal, state and local laws. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law document at ****************************************** To view our Pay Transparency Statement, please click here: Pay Transparency Statement "Know Your Rights: Workplace Discrimination is Illegal" Poster The "EEO Is The Law" Poster #GH19 #LI-20 #LI-Remote

EARN OVER $26.00 PER HOUR! We have great opportunities to earn a living in the glass industry! You will be eligible for benefits and represented by the United Steelworkers (USW) after thirty (30) days. Once you are a member of the United Steelworkers you will be eligible for a $100 monthly attendance bonus and a $25 a month safety bonus. All hours over forty in a week are paid at overtime rates. In the Machine Mechanic Department we work a five (5) days on two (2) days Monday-Friday schedule in order to support the factory. The apprenticeship is for 8,000 hours and experienced mechanical maintenance candidates will have the opportunity to progress quicker in the apprenticeship. Apprentice Job Change Technician Job Description: MACHINES AND EQUIPMENT: Hydraulic jack, shoplift, ladder, degreaser, cable lift, vise, hoist, grinder, dolly, computer and similar or equivalent machines and equipment. GAUGES AND TOOLS: Various wrenches, drill press, small hand tools, ruler, brush, scraper, cutting wheel, tape measure and similar or equivalent tools. Must have own personal tools as designated by foreman. PRODUCTS OR MATERIALS: All forming machines, parts, molds, molten glass, semi-finished and finished glass, rags, chalk, grabs, plungers, hoses, tubing and similar or equivalent products or materials. WORK GUIDES AND INSTRUCTIONS: Detailed verbal, written instructions. Average blueprints. Job setup card and factory slate. QUALITY REQUIREMENTS: Inspect, set up, adjust and test forming machines, repair and clean parts and equipment to specifications established by management. WORK DESCRIPTION: Set up, make adjustments, test run all types of forming machines to include Precision Press Procedures and Methods. Repair drag links, tension arms and springs, ring carriers, ring lift cages and spring cages and all other process change parts necessary for various item production. Perform machine startup activities. Maintain parts inventory in computer and department housekeeping. Perform all setup work on the press electronic timers. Adjust electronic timers to optimize machine performance. Setup and repair of all wind lines and drums. Some minor plumbing and fabrication as required by job card. Replace and position spot burners or rotating burners by item. Perform miscellaneous repair work as required to complete the machine setup. Methodically work and solve setup issues. Print machine equipment setup sheets from computer and enter data as needed into Hot End Setup. Add changes to setups to improve startups. Clean parts before restocking. Maintain quality housekeeping and good safety practices in the work area. Assist Supervisor with sampling process.

Company Overview: At Ernst Concrete, our mission is to be the most trusted supplier of quality ready-mix concrete, concrete products, and related services. We strive to build loyal, long-term relationships with our customers and employees through integrity, teamwork, and a dedication to excellence. If you're looking for a rewarding career in a company that values its people, we'd love for you to join us! Job Identification Diagnose, adjust, repair or overhaul mobile mechanical, hydraulic and pneumatic equipment. Essential Job Functions Perform skilled repair and maintenance operations using equipment such as hand and power tools, hydraulic presses and shears, and welding equipment. Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices. Examine parts for damage or excessive wear Dismantle and reassemble heavy equipment using hoists and hand tools. Inspect, test and measure completed work using devices such as hand tools and gauges to verify conformance to standards and repair requirements. Clean, lubricate and perform other routine maintenance work on equipment and vehicles. Assemble gear systems and align frames and gears. Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic and pneumatic equipment. Weld or solder broken parts and structural members using electric or gas welders and soldering tools. Clean parts by spraying them with grease solvent or immersing them in tanks of solvent. Record maintenance and repair information. Job Requirements Must be able to read, write and speak English. Must be able to communicate with Management, Supervisors and Peers. Must be able to do math, such as addition, subtraction, fractions and percentages. Must be able to determine and accomplish tasks, priorities and goals without supervision. Must be able to operate vehicles, mechanical devices and equipment in a safe and effective manner. Must have and maintain a valid Ohio drivers license. Must be willing and able to undergo a pre-employment drug screening and background check Physical Demands Requires you walk, stand, and sit. Requires use of hands and fingers to handle and feel. Required to climb, balance, kneel, crouch and crawl. Requires use of hearing and smell. Requires ability to lift up to 110 pounds. Requires the ability to push and pull items with 100 pounds of force. Requires ability to identify and distinguish colors visually. Requires peripheral vision with the ability to observe an area they can be seen up and down or left and right while eyes are fixed at a given point. Requires depth perception which includes three-dimensional vision ability to judge distance and spatial relationships. Environmental Conditions Weather conditions such as temperature, moisture and other conditions have a significant impact on the job. This must be tolerated, with or without reasonable accommodations, being exposed frequently to extreme weather conditions. There are high noise levels and significant vibration associated with this position. This may be caused by the truck and equipment and jobsite noise. There are other physical hazards that endanger life, health or bodily injury, such as proximity to moving, mechanical parts, falls from elevated heights, environmental conditions, moving equipment and other hazards. The is also exposure to cement, lime, concrete admixtures, dust, diesel fuel and other substances which may be toxic, cause burns or be explosive. Requires working indoors in non-controlled environmental conditions. Requires working in a closed vehicle or equipment. Why Join Us? Team Culture: We foster a collaborative, supportive environment where everyone's contributions matter. Commitment to Safety: We prioritize the safety of our team members with comprehensive policies and protective equipment. Career Growth: Opportunities for learning and professional development. Benefits Medical, Dental, Vision 401k with generous match Profit Sharing Paid Vacations/Holiday Bonuses Equal Opportunity/Affirmative Action Employer #Driver171

Wood is currently recruiting a Forklift Mechanic for a position in Hebron, OH at an active Waste Plastics Pyrolysis Facility. This position performs maintenance, diagnoses issues, and repairs industrial lift trucks to ensure they are safe and efficient. Key responsibilities include routine maintenance, troubleshooting electrical and hydraulic systems, replacing parts, and completing repairs according to technical manuals and safety standards. This role requires strong problem-solving skills, knowledge of mechanical and electrical systems, and the ability to work independently and as part of a team. Authorization to work lawfully in the US without sponsorship from Wood is required. Responsibilities A forklift mechanic is a specialized technician responsible for the inspection, maintenance, repair, and overall upkeep of forklifts and other material handling equipment. They work in industrial settings like warehouses, construction sites, and manufacturing facilities to keep these crucial machines operational and minimize downtime. Key Responsibilities Perform Routine Maintenance: Conduct regular checks, fluid changes, filter replacements, and lubrication of forklifts to ensure optimal performance and longevity. Diagnose and Repair Issues: Troubleshoot and identify mechanical, electrical, and hydraulic problems by interpreting diagnostic tools, schematics, and technical manuals. Conduct Safety Inspections: Inspect all equipment for structural problems, wear, and tear to ensure compliance with safety regulations before and after repairs. Replace Parts and Components: Dismantle equipment to access and replace faulty or worn parts, including motors, transmissions, and hydraulic systems. Manage Records: Maintain accurate logs and records of all maintenance and repair work performed on each forklift. Respond to Emergencies: Address unexpected breakdowns and emergency situations promptly to minimize operational disruptions. Manage Parts Inventory: Order, track, and maintain an inventory of necessary spare parts and supplies. Stay Updated: Keep informed about new technologies, industry standards, and safety regulations related to forklift operation and maintenance. Qualifications Technical Proficiency: Strong understanding of forklift electrical, hydraulic, and mechanical systems. Problem-Solving :Excellent analytical and problem-solving skills to diagnose complex issues. Technical Documentation: Ability to read and interpret technical manuals, schematics, and diagrams. Physical Stamina: Physical strength and dexterity to lift heavy objects and work in various environments.