Diesel technician jobs in Oyster Bay, NY

H.O. Penn Machinery HIRING IMMEDIATELY Generator Rental Mechanic Medford, NY Pay:$49.06/hour Benefits: UNION Shop! Pension, welfare, annuity, and vacation funds Medical/dental/vision insurance Paid company holidays Key qualifications: Experience in Electric Power Generation, including troubleshooting and repair of electrical equipment (generator, ATS, Switchgear), AC and DC, and diesel engine required Electrical troubleshooting skills, breaker testing, paralleling generators, medium/high voltage, transformers, thermal scan (IR Scan) preferred Must be computer proficient to be able to run diagnostic software and prepare service communications Must have strong communication skills and have high self-management Valid and clean driver's license required (this position drives a service truck) Responsibilities: Follow all department policies and procedures to ensure that fleet is ready to rent Check-in and check-out equipment in a timely manner, in accordance with department processes Plan proper maintenance and repair procedures for efficiency Effectively communicate with supervisor on status of fleet and overall conditions Continually improve key processes Successfully maintain and repair service fleet Troubleshoot problems Efficiently and proactively utilize resources to correct problem Document steps taken to correct problems Effectively communicate with all stakeholders (customers and Generator team) Represent company in a positive, professional manner Communicate options to correct current problems Advise customer of cost of repair and collect payment as required A culture that focuses on safety and safe work habits Be an active part in the continuous improvement of H.O. Penn's safety culture Timely completion of any required safety training for self Adherence to all Environmental, Health, and Safety Policies Understand job risks and take appropriate steps to mitigate those risks, such as wearing all required personal protective equipment as required by task Qualifications: Experience in Electric Power Generation, including troubleshooting and repair of electrical equipment (generator, ATS, Switchgear), AC and DC, and diesel engine required Electrical troubleshooting skills, breaker testing, paralleling generators, medium/high voltage, transformers, thermal scan (IR Scan) preferred Must be computer proficient to be able to run diagnostic software and prepare service communications Must have strong communication skills and have high self-management Valid and clean driver's license required (this position drives a service truck) Physical Requirements: Standing and walking (including on uneven surfaces) Sitting, body rotation, and forward bending (in both sitting and standing positions) Lifting up to 60 lbs. (machine or team lift for items over 50 lbs.) Carrying up to 50 lbs. for short distances Push/pull tasks requiring up to 75 lbs. of force Climbing stairs and ladders (including non-standard access points) Crawling, kneeling (low work), and working in awkward/tight positions Strong grip strength (up to 80 lbs. with both hands; up to 30 lbs. with one hand) Hand coordination and overhead/extended reaching Operating equipment, machinery, foot pedals, and hand tools Outdoor work as required (exposure to weather and varying environments) Wearing up to 20 lbs. of PPE, including flame-resistant clothing, welding helmets/shields, and ANSI-rated protective footwear as required We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, national origin, ancestry, age, marital status, citizenship, sexual orientation, gender or gender status, disability, genetic information, otherwise qualified disabled or veteran status, or any other protected class as designated by Federal, State and/or local law.

A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including: • Observing and assisting in installing and repairing auto glass • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing • Providing additional services & products • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques. • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday. • Performs other duties as assigned • Complies with all policies and standards What you'll get: • Competitive weekly pay starting at $23.50/hour, increasing to $27.75/hour after training and certification. • Earn $5/set of wiper blades when added for customer safety. • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days. • Program to buy additional PTO or sell unused time up to 16 hours. • Up to $5,250 annually in tuition reimbursement. • Paid training and all the tools and resources you'll need to be successful. • View all our health, wealth, and life offerings at ************************* Education Qualifications • High School Diploma GED/Equivalent Preferred • Valid state-issued driver's license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds. • Ability to stand for extended periods, work in tight spaces, bend and twist body • Ability to use a variety of hand tools and power tools safely and effectively • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting” • Ability to work scheduled days, with flexibility on start and end times to accommodate customer's needs • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues • Problem-solving and ability to trouble-shoot issues, independently and collaboratively • Ability to read, write and interpret the English language and technical directions • Ability to communicate orally (via phone) and written (via computer or other electronic means) • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). #LI-JF1 This in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. This in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we're proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability.

Job Description Automotive and Diesel Truck Mechanic Islandwide Auto and Truck Repair Islandwide Fleet Service professionals are committed to getting each job done right the first time. We believe that you should never have to return to any repair shop twice for the same problem. Other shops might not take the time to discover the root cause of the issue, but this is the precise approach we take at Islandwide Fleet Service. We serve all of Long Island, and weve been in business for over 40 years. Our service team is a group of dedicated professionals who know how to go the distance while working in a family friendly atmosphere. Comradery is of upmost importance. Google us at Islandwide Auto and Truck Repair to see what all of our customers say about us!! WWW.islandwidefleetservice.com ************** * RESPONSIBILITIES * - Maintaining and repairing cars and trucks so they are fixed correctly the first time. -Performing a thorough vehicle check out and notifying the service adviser on the condition of the vehicle -Maintaining a high quality control standards - Being able to work on vehicles in the shop and at the customers location _-taking control over your own job position * BENEFITS* - We offer a Monday through Friday schedule - Paid holidays - On the job training to further along previous repair knowledge -Paid vacation - Uniforms -Flexible schedule -Health benefits -Bonus program ....and most importantly a great staff. Job Type: Full-time Salary: $30.00 - $45.00 per hour Benefits: 401(k) matching Employee discount Health insurance Paid time off Retirement plan Schedule: 8 hour shift Monday to Friday Overtime Supplemental Pay: Bonus pay Experience: Mechanical Knowledge: 3 year (Preferred) License/Certification: Driver's License (Required) Work Location: One location Close Preview Job Type: Full-time Salary: Up to $40.00 per hour Benefits: Employee discount Health insurance Paid time off Retirement plan Schedule: 8 hour shift Experience: Diesel engine repair: 1 year (Preferred) Mechanical knowledge: 1 year (Preferred) Work Location: In person Edit job Pending View public job page

Job Description Suffolk County Operation Must have experience; diesel preferred Air brakes system, DOT Pre-schedule Maintenance inspections Competitive salary Paid Holidays Job Type: Full-time Pay: $48,000.00 - $75,000.00 per year

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. **Compensation:** $40 / hour + Paid OT **Location:** Bronx, NY **Schedule:** Monday to Friday, 4AM to 12:30PM Responsibilities + The Fleet Mechanic position is responsible for preventive maintenance, troubleshooting, diagnosis and repair of fleet vehicles and equipment as assigned. + Maintain, troubleshoot, and repair all fleet vehicles within assigned Primo Water North America locations. + Respond to field service calls. + Order mechanical components, services and parts and maintain inventory. + Perform and document all phases of vehicle maintenance and repair, including diagnostics. + Maintain communication with drivers and management regarding maintenance and service of vehicles and equipment. + Maintain a unit history file for each vehicle Qualifications + Must be 21 years of age or older. + Experience with both diesel /propane vehicles and air brake systems, preferably with heavy duty vehicles. + Engine and Chassis Diagnostic software experience. + Focus on safe work practices and high quality while executing duties under minimal supervision. + Accurately record and document all maintenance activity. + Ability to use fleet software for vehicle maintenance tracking, input work orders, and inventory management. + Workflow -- Daily Vehicle Inspection Report (DVIR) and US DOT requirements for commercial vehicles. + Ability to lift parts and equipment weighing up to 50 pounds. + Must have own set of personal tools. + Ability to meet Department of Transportation (DOT) driver qualification policy requirements. + CDL preferred; ability to obtain within six (6) months of entering the position (CDL may be required in some locations) Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

Job Title: JFK Station Mechanic Department: Maintenance Reports To: Outstation Line Maintenance Manager ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties and responsibilities include, but are not limited to: Conduct Terminating Service maintenance checks per the KA General Maintenance Manual at least every 50 flight hours. Accomplish all required servicing of the aircraft including wheel and brake replacement, engine oil servicing, replacing burnt out light bulbs, wiping down struts, etc. Troubleshoot and repair defects discovered and complete all return to service paperwork completely and on a timely basis. Forward copies of repair information to Maintenance Control as work is completed. Perform other duties as directed by the GMM, Maintenance Control or his supervisor. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Also required is an A&P license and previous 747 experience is desirable. Tools required as well. EDUCATION and/or EXPERIENCE High school graduate; some college and/or technical school desirable. LANGUAGE SKILLS Ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence. Ability to give verbal and written direction to assigned staff. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to reach with hands and arms, stand; walk; talk or hear; and use hands and fingers to handle, feel or operate objects, tools, or controls. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move more than 50 pounds, to eye level. Lift 10 pounds with each arm over your head Twist, turn with normal strength force Climb numerous flights of stairs Work on ladders, lifts and in some case high elevations Work in a squatted position Work in all weather conditions WORK ENVIRONMENT The work environment characteristics describe here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed primarily in a construction, maintenance setting. The noise level in the work environment is usually loud.

229 N Franklin St., Hempstead, NY 11550 AUTOMOTIVE BILLER / DMV TITLE CLERK Full-time PositionJOIN THE FASTEST GROWING DEALER GROUP IN THE REGION!$21 - $31 /hour & Advancement Opportunities! Garden City Mazda is growing and needs to hire a Automotive Biller / DMV Title Clerk.Join our dynamic team where you'll discover not just a job, but the cornerstone of a thriving career!As a Biller, you'll play an integral role, collaborating closely with our Controller and esteemed colleagues. We take immense pride in fostering a supportive work culture that seamlessly integrates each department so teamwork flourishes, making every day a rewarding experience. While prior titling experience is preferred, we welcome candidates with dealership experience who are willing to learn and grow in this role. This is an excellent opportunity for someone looking to transition into automotive billing and title work. Were looking for motivated and goal-driven candidates to make an immediate impact on our expanding company! Apply now and join our team! We offer: $21 - $31 per hour based on experience Full-time Position Medical, Dental & Vision Insurance 401(k) Retirement Plan Paid Vacation & Sick Time Employee Discounts on Vehicles and More Long-term Job Security CareerAdvancement Opportunities Responsibilities Biller / DMV Title Clerk: Prepare title and registration documents accurately and in a timely manner Prepare out-of-state title work and submit to a third-party agency as necessary Issue customer refunds Schedule reconciliation Perform other duties as requested to assure optimum service levels Qualifications/Requirements Biller / DMV Title Clerk: Titling and/or Automotive Billing experience at a Car Dealership preferred Excellent customer service Experience with accounting software and other account functions is a PLUS! Organizational and phone skills are required The ability to work in a fast-paced environment Be a team-player Understand deadlines and be able to apply the appropriate sense of urgency to all tasks Please upload your resume. Completing the online assessment will grant you priority consideration! Must be authorized to work in the U.S. without sponsorship and be a current resident Applicants must pass pre-employment screening We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. RequiredPreferredJob Industries Customer Service

at Aquifer Drilling and Testing, Inc. Come join an amazing team of close to 900 employees dedicated to providing Excellence on Every Level! Perform all maintenance and repair functions on all equipment per company policy and DOT regulations. The Mechanic must have the ability to perform general maintenance, repairs and troubleshooting on various types of trucks and equipment. General understanding of diesel engines, gas powered engines, hydraulics, electrical systems, and pumps. Knowledge of drilling rigs and equipment preferred. In addition, flexibility with the ability to multi-task and prioritize, as well as organizational skills are required as there are a variety of requests made on a daily basis of this person. In addition, a positive attitude, along with a willingness to help other employees, is required. The ability to work in a team environment without supervision is necessary for success.ESSENTIAL FUNCTIONS Review all repair request forms, make suggestions, obtain pricing, and discuss options with the Shop Manager, if necessary, for completing the repair Repair and maintain all drill rigs, trucks, trailers and other equipment Complete paperwork for all repairs and maintenance and maintain records Perform 90 day and annual inspections on all drill rigs, trucks, trailers and other equipment. Complete the inspections in accordance with DOT regulations Inspect and diagnose physical conditions of equipment on a regular basis to ensure safety standards are met Manages and directs field testing for all completed work requests, communicating end results to initial requestor and Shop Supervisor or Operations Manager Maintain proper notification and documentation of all vehicles down time, fixes and resolutions-maintaining files appropriately Requisition of materials, parts, and supplies Responsible for keeping rig and equipment in good working order and condition Document exceptions and forward to the Administrative Assistant to enter in the computer Use diagnostic equipment Communicate effectively verbally and in writing Performs all duties in compliance safety practices, policies, procedures and government regulations Complete other duties and projects as assigned JOB REQUIREMENTS AND QUALIFICATIONS High School Diploma or equivalent At least three years of mechanical experience Ability to lift up to 60 pounds throughout the day Proof of mechanical training, classes, and certification Knowledge of DOT regulations Work overtime and various shifts Knowledge of power/hand tools and diagnostic equipment Read and understand manufacture repair manuals Computer competency $25 - $50 based on experience Cascade Environmental, LLC, and our subsidiaries is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state or federal law. This policy applies with regard to all aspects of one's employment, including hiring, transfer, promotion, compensation, eligibility for benefits, and termination. EEO is the Law. Cascade is committed to offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability, please contact us at **************. Who is Cascade? From our roots as a Northwest regional drilling company, we have grown into a national, full-service environmental services company offering innovative solutions to our customers. We believe in excellence at every level and that includes hiring employees who are the best at what they do. We firmly believe our employees are the most critical component of our long-term success. At Cascade, we provide a career, not just a job. Cascade's core purpose is to be the essential business partner that contributes to our clients' success and advancement in tackling even the most challenging environmental and geotechnical problems, to contribute to our industry and the betterment of our employee's careers and the communities we serve. What does Cascade offer? Comprehensive training and flexible career paths Encouragement to pursue new roles nationwide, explore a variety of projects, and work with mentors and experts who help shape the industry Comprehensive Medical/Prescription Drug/Dental/Vision 401(k) Retirement Savings Plan with Company Match Company-paid Basic Life Insurance / Short- and Long-Term Disability Health Reimbursement Account and Flexible Spending Account Sick Leave / Holiday / Vacation Pay License Bonuses / Tuition Reimbursement Charitable Donation Match We are proud to provide a full range of benefits programs that help our employees and their families plan for today and their future. The benefits we offer are competitive and allow flexibility and choice to meet the individual needs of our employees and their families. Who are you? Hard-working, talented, and career-minded Challenge-seeking Strong desire to contribute to a stable, diverse organization Work hard, play hard mindset Open to continued learning and development Collaborative, team player Customer service minded Interested in learning more about Cascade and how we provide Excellence on Every Level? Click here to learn more ******************************************** To learn more about our exciting career opportunities at Cascade, check out our Careers site at **********************************

20320 Chartown Dr., Cornelius, NC 28031 Automotive Service Technician / MechanicFlat Rate Pay + Great Benefits!$30 - $50 per hour! $10,000 - $24,000 Sign-on Bonus for MOPAR-Certified Techs! Experienced Mopar Techs Can Earn $100,000+ a Year! We Pay More for Your Certifications! Relocation Allowance Line Tech Production Bonuses Paid Twice a Year, Yes Twice not Once! (See Below **) Immediate PTO on Day 1 and 13 Days When the New Year Rolls Around! 5-day Work Week Schedule A/C Shop All New Equipment Big Homes Low Taxes Walk-In Applicants are Also Welcome Are you passionate about automotive repair? At Lake Norman CDJR, we believe that if youre not having fun fixing cars, then youre not doing it right! If you have the knowledge and are looking for a career with a company to take you places; a company to understand your worth, your expertise, and your vision look no further YOU HAVE FOUND US. Why Lake Norman CDJR? We have a brand-new huge dealership located blocks from the lake, lots of fun, sun and restaurantsnearby. AC shop, all new equipment Support staff, car washes and valets A Shop Foreman who has decades of experience to help you turn the most hours and have FUN! ** Ask about our Wrench & Relax Program: Every six months a Technician production bonus is paid out. Instead of a bonus once a year, they get two! JUNE PAYOUT & DECEMBER PAYOUT - 2nd week of the month We offer: Generous pay plan! $30 - $50 per hour! $10,000 - $24,000 Sign-on bonus for MOPAR-certified Techs Great benefits including Medical, Dental, Vision and Life insurance 401(k) Paid vacation Short- and Long-Term Disability Employee discount program Continued training and opportunities for advancement Responsibilities - Service Technician: Diagnose faults and confirm findings with the supervisor Inspect, repair, or replace parts and components of automotive systems as required Test and adjust repaired systems to the manufacturers performance specifications Advise customers on work performed, general vehicle condition, and future repair requirements Complete reports to record problems and work performed Other duties may be assigned according to skills and certifications Qualifications/Requirements - Service Technician: Experience required Must be passionate about the automotive industry Well organized, possess a good work ethic and a positive attitude Hard-working, self-motivated and have excellent time management skills Valid drivers license with a clean record A valid Motor Vehicle Inspection License is a plus! Please upload your resume.Completing the online assessment will grant you priority consideration! Must be authorized to work in the U.S. without sponsorship and be a current resident. Must pass pre-employment testing to include background checks, MVR, and drug screening. We are an Equal Opportunity Employer . All qualified applicants are considered regardless of ethnicity, nationality, gender, veteran or disability status, religion, age, gender orientation or other protected status. RequiredPreferredJob Industries Customer Service

APPRENTICE TECHNICIAN We are seeking a motivated and reliable Apprentice Technician to join our dynamic team in the HVAC, Refrigeration, and Commercial Kitchen Equipment Repair industry. As an apprentice, you will gain hands-on experience, learn essential technical skills, and work alongside skilled professionals to become proficient in servicing, installing, and maintaining HVAC systems, refrigeration units, gas, steam, and electric. This individual must show growth within six months to one year before moving on to junior technician status. The Apprentice will be evaluated every three months and rotate between technicians to ensure diverse training. Key Responsibilities: Assist senior technicians with the installation, maintenance, and repair of HVAC, refrigeration, and commercial kitchen equipment Learn to troubleshoot and diagnose equipment issues using tools, meters, and specialized instruments Perform preventive maintenance tasks to ensure the proper functioning of equipment and systems Assist with system inspections, identify malfunctions, and provide recommendations for repairs or upgrades Maintain and organize equipment, tools, and spare parts inventory Keep accurate records of services performed, including diagnostic results, repairs, and parts used Adhere to safety guidelines and best practices when handling equipment, tools, and hazardous materials Participate in on-the-job training and attend formal training programs to develop technical knowledge and skills Communicate effectively with clients, answering questions and providing updates on repair or installation progress Assist in the preparation of estimates and work orders under supervision Support senior technicians in troubleshooting complex issues as experience is gained Requirements: High school diploma or equivalent. A strong interest in learning about HVAC, refrigeration, and commercial kitchen equipment repair Basic understanding of mechanical and electrical systems (training will be provided) Good problem-solving skills and attention to detail Ability to work in a physically demanding environment (lifting equipment, climbing ladders, working in confined spaces) Strong communication skills and the ability to work well as part of a team A valid driver's license and reliable transportation (some travel may be required) Ability to lift 50 - 70 pounds Willingness to commit to completing the apprenticeship program and pursuing a career in the trade Must be able to obtain any required fire watch and burn permits within 6 months of hire Benefits: Competitive pay with opportunities for increases based on performance and skills development Hands-on training and mentorship from experienced professionals Career growth opportunities within the company Health insurance with generous company contribution Dental, Life Insurance, Disability, and Vision 401K plan with employer match Vacation and sick days Paid holidays

Functional Title: B Mechanic Department: Maintenance Union/Non-Exempt Safety-Sensitive: Yes Reporting to: Foreman Direct Reports: None Job Purpose/Function: The B Mechanic is responsible for the maintenance of Norwalk Transit District's fleet of diesel and gas powered vehicles, including buses, body-on-chassis vehicles and all support vehicles; vehicle related components, including wheelchair lifts and ramps; vehicle support equipment; facilities and their related equipment, including fork lift and sweeper; light repair of HVAC, electrical and plumbing; maintaining all fixed passenger amenities; and, other duties as assigned by the Foreman/Management. All duties are performed with light supervision of an A Mechanic or the Foreman. Responsibilities Opening and closing of facility: perform security and general inspection of facility. Completing scheduled Preventative Maintenance inspections of vehicles and equipment. Verify vehicle performance by conducting test drives, adjusting controls and reviewing systems. Maintain vehicle records by annotating services and repairs on repair orders and inspection forms. Respond to road calls and/or vehicle breakdowns. Repair reported vehicle defects. Use repair manuals, diagrams and diagnostic devices to determine vehicle performance conditions when conducting inspections or troubleshooting defects. Troubleshoot engine performance and repair (in chassis overhaul). Troubleshoot transmission performance and repair, under the supervision of an A Mechanic or Maintenance Foreman. Vehicle maintenance/repair will include, but not be limited to, the following major component parts and/or systems: power and drive trains, electrical, suspension, brakes, air system, chassis, steering and alignment, fuel, emissions, exhaust, heating and air conditioning, coolant, accessibility features, and all other current and future features of a public transit vehicle. These duties are performed with light supervision and/or instruction of an A Mechanic or the Foreman. Maintains and corrects vehicle, shop equipment, and facility deficiencies by servicing, removing, repairing, adjusting, overhauling, assembling, disassembling and replacing major assemblies and sub-assemblies, as required. Maintain all equipment by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; and repair as needed. Perform light body repairs, including but not limited to, replacing body parts, panels, bumpers and doors; priming and painting; and any other related activity. Maintains vehicle appearance by cleaning, washing and painting if needed. Assist with inventory control through communicating part number utilization and remaining stock in inventory. Contains costs by evaluating service and parts options, as well as warranty provisions when available. Provide back-up for service line fueling, washing and cleaning. Perform snow and ice clean-up/removal at all Transit District facilities using designated snow equipment. Maintain job knowledge by participating in educational opportunities and reading related technical, mechanical and regulation publications. Perform other duties assigned. Safety & Security: As part of daily duties, maintain the safety and security of the facility: Carries out safety and security policies and practices. Observes surroundings and notes/reports any changes to supervisor. Ensures doors are properly secured when closing facility for the night. When opening in the morning check for anything unusual or suspicious before entering the building. Correct or report any objects that seem out of place while moving about the building. As part of closing responsibility, secure all exterior doors, including overhead doors. Responsible for contributing to a safe and secure work environment. Is cognizant of surroundings and acts in a safe manner at all times. Is knowledgeable of and adheres to OSHA, NTD and other safety standards, directives and advisories, both written and verbal. Uses safety equipment and protective clothing as appropriate and necessary. Maintains good housekeeping habits in work area to avoid injury to self or others. Immediately reports to their respective supervisor or Manager of Safety and Security any safety or security issue and makes recommendations for improvement. Observes building access restrictions and locks doors when not present. Knows the nearest two safety exits and participates in safety drills. This is a safety-sensitive position and is subject to random drug and alcohol testing. Education and Experience Required: Graduation from High School or a GED certificate. Preferable technical and/or diesel trade school. At least three years' mechanical experience in the heavy duty diesel transit vehicles. Ability to work effectively in a lightly supervised environment. Ability to read and follow manuals and diagnostic equipment to achieve desired repairs. Ability to communicate effectively in writing and verbally with supervisor. Must have or obtain an appropriate Commercial Driver's License within six (6) months of hiring. Must provide required tools for the job. Physical Requirements : Must be able to read, write and communicate fluently in English. Frequently required to walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; stoop, crouch and kneel. The member must occasionally lift and/or move objects up to 75 pounds. Work Environment : There will be frequent interaction with employees and customers. The working environment is generally favorable. Lighting and temperature are adequate. Work is generally performed within a maintenance shop environment. Agency Disclaimer : The CEO may modify this job description based upon agency needs; may require the employee to perform functions beyond those mentioned. The Norwalk Transit District is an Equal Employment Opportunity Employer.

About the Role We are looking for a Mechanic (Senior and Junior) to help service and maintain our e-scooters and e-bikes. This role is ideal for mechanically-inclined operations professionals that want to broaden and build their career experiences . What You'll Do Be responsible for the maintenance of e-scooters and e-bikes Perform a broad spectrum of repairs from bolt tightening to the most complicated electronic part replacement Follow processes. Comply with, improve upon, and enforce processes Follow established safety procedures and techniques to perform job duties and make sure Ridepanda customers are on the safest vehicles Problem solve. Will need to spot issues and find creative ways to overcome obstacles that come your way About You 2+ years of experience as a mechanic in the transportation industry Good communicator capable of motivating a team, plus communicating and documenting issues clearly Motivated, energetic individual who isn't afraid to roll up their sleeves Strong attention to detail, and able to follow strict maintenance procedures Comfortable learning and adapting to new concepts and using new tools

Company OverviewOur first SpeeDee Oil Change opened in December 1980 in Metairie, Louisiana. SpeeDee swiftly grew into a quick lube and automotive tune-up service business, and by the mid-90s, SpeeDee had added complete brake service and grown to a full-service auto maintenance and repair facility.For 40 years, SpeeDee has built trusted customer relationships based on reliability and professional service and grown from a single store to more than 150 locations. How Are We Different From the Competition? Local Ownership Quality Service Training and Certification Multi-Point Courtesy Check and Service Review Free Top-Off Service Maintenance Records Affordable Rates Job SummaryThe Mechanical Service Technician is responsible for all brake, tune-up, diagnostic and repair services, as well as additional services as directed by the Shop Manager or Assistant Shop Manager.Responsibilities Performing high quality mechanical repair services in accordance with industry approved standards Developing trusting customer relationships through honest and competent service Maintaining shop supply inventory and notifying the Shop Manager of reorders as needed Explaining SpeeDee programs, services and pricing structure in order to achieve high customer satisfaction and increased revenues Attending training sessions that are applicable to the career path and position requirements Ensuring equipment is functioning properly at all times and performing preventive equipment maintenance Following appropriate safety procedures and notifying the Shop Manager of safety hazards or needed equipment repairs Requirements Commitment to excellence at all levels of service Advanced automotive experience A.S.E. Certification in Engine Performance, Engine Repair and Brakes (preferred) Good communication skills and upbeat personality Enthusiastic attitude and strong work ethic Clean and neat appearance Valid state driver's license Other Duties and ResponsibilitiesIn addition to the duties listed above, every crew member is responsible for general center maintenance and cleaning duties such as mopping, washing center windows and clearing litter. Crew members must attend crew meetings as required, as well as other duties assigned by a supervisor. Working Conditions Materials and Equipment used: Automotive oils, fluids, and lubricants. Windshield washer fluid, battery electrolyte Environment: Frequent exposure to outside weather elements, noise, and vehicle exhaust fumes throughout the entire shift. Physical Activities: Position requires good corrected vision, hearing, frequent standing, walking, climbing, stooping, crouching, handling, reaching, and lifting. Benefits/Perks Growth Opportunities Locally Owned and Operated Safety You can Trust Training and Certification Opportunities Competitive salary Excellent work environment Tools Provided Compensation: $20.00 - $25.00 per hour Let's talk about the SpeeDee Service Difference: Local Ownership Most SpeeDee stores are locally owned. They're run by families who service the automotive needs of other families in their communities. Quality Service SpeeDee was built on a solid commitment to customer service. Training and Certification SpeeDee owners hire ASE-certified technicians for tune-ups, mechanical work and other repairs. Advanced training is available through the SpeeDee Performance Certified program. Multi-Point Courtesy Check and Service Review Every time you bring your vehicle in for a 17-Point Oil Change, we'll also give you a multi-point courtesy check and a service presentation as an added bonus. Free Top-Off Service To help keep your car running smoothly and safely, SpeeDee offers a free top-off service for the 3 months or 3,000 miles following any SpeeDee oil change or tune-up service. Maintenance Records If you're not sure which services you need or which services you've already completed, don't worry. We'll keep track of your SpeeDee maintenance history and manufacturer's recommended service schedule. Affordable Rates Looking for an alternative to your dealership? Compare their prices to ours, and you may find that SpeeDee can perform the services you need at a lower cost. You Decide It's our policy to provide you with the information you need to make a decision without pressure or overselling. Visit your local SpeeDee today - no appointment necessary! This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchisee/franchise location, and not to SpeeDee Worldwide, LLC.

We are currently seeking an experienced automotive mechanic to work at Wolfgangs of Tenafly. Our well known shop specializes in Mercedes Benz and we are looking for two experienced techs to join our team. Work on amazing vehicles in a great atmosphere. Clean shop with all of the latest equipment. Candidates must be fluent in all aspects of diagnosis and repair, specifically with Mercedes Benz. We work on other vehicles however Mercedes is our focus. Responsibilities: - Conducting routine maintenance on vehicles, including oil changes, tire rotations, and brake inspections - Diagnosing and repairing mechanical and electrical issues - Conducting inspections and test drives to diagnose issues - Using diagnostic tools and equipment to identify issues - Ordering parts and supplies as needed - Keeping track of work orders and invoices - Providing excellent customer service and communicating effectively with clients If you are an experienced automotive mechanic with a passion for European cars, we would love to hear from you. Please apply with your resume and cover letter. Requirements Requirements: - Minimum of 5+ years of experience working as an automotive mechanic - Strong understanding of European car models and their unique features - Ability to diagnose and repair mechanical and electrical issues - Proficiency in using diagnostic tools and equipment - Ability to work independently and as part of a team - Excellent problem-solving skills - Strong attention to detail - Excellent customer service skills - Strong communication skills - Available to work a minimum of 40 hours per week, 8:30 AM - 5:00 PM with a 30-minute lunch - Minimum of two references Salary Description $45/hour

Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Edison, NJ For More Info Call Jordon or text "Edison" to ************ Hear it from a Torque Mobile Mechanic Technician Here: ************************************ Technician Positions Pay Each Week Hourly Pay:?$43.00 per hour based on experience Ability to earn additional monthly performance incentive Schedule: Flexible 40-hour work week (weekend premiums apply) Fuel Card and Company Cell Phone provided For mobile technicians, work site service vehicle will be provided Grow with Ryder: This position provides additional training to level up. We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Edison" to ************ At Ryder, we offer outstanding benefits: Generous Paid Time Off Medical, Dental and Vision Insurance effective 30 days from hire date Life Insurance and Disability Insurance Options 401K Savings Plan with Ryder matching contributions Discount on purchase of Ryder Common Stock Employee Discounts on Automotive, Mobile plans, Travel and Hotels Accredited Tech School Tuition Reimbursement PPE & Uniforms provided at no cost Paid Job training and development Employee & Customer Referral Bonus program For More Info Call Jordon or text "Edison" to ************ Apply today and see why a job with Ryder is what you've been looking for. Call us or go online to apply to one of our career opportunities Click Here to See All Ryder Careers:************************************************ EEO/AA/Female/Minority/Disabled/Veteran \#Techhbc Requirements High school diploma or equivalent preferred Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred Basic tools, required Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including: Routine preventative maintenance, which should include oil changes, brake and tire work Diagnostics and repairs, including AC, electrical systems Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs Four (4) years or more Relevant work experience, preferred NonCommercial Driver License CLASS E, preferred Valid Commercial Driver License (CDL) CLASS A, preferred Other State driver's license, as required Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02 Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents Must be able to drive Ryder vehicles Ability to: Understand and adhere to Company policies in all areas Complete repair orders with the Company established systems Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors) Work independently and as a member of a team Prioritize workload Proven hands-on mechanic, customer service, and account management skills Demonstrates customer service skills Strong verbal and written communication skills Flexibility to operate and self-driven to excel in a fast-paced environment Self-starter and self-sufficient approach Capable of multi-tasking, highly organized, with excellent time management skills Detailed oriented with excellent follow-up practices Entrepreneurial spirit Preventive Maintenance (PM230&PM298) within 90 Days Brakes-Air (BA220&BA298) within 90 Days Brake mechanics/inspectors FMCS 396.25 Hydraulic Brake (BH220&BH298) where appropriate within 90 Days Tire & Wheel TW220 within 90 Days CF609 & A/C trained and qualified (AC220&AC298) within 180 Days HD electrical - DR208 within 90 Days Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix) This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must: Pass a Ryder Drug Test Pass a DOT physical Pass a Ryder road test Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns Performs facility maintenance duties Interacts with customers/drivers to properly determine nature of complaint once assigned a task Instructs and advises other technicians regarding maintenance repair procedures and diagnostics Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to: A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers Driveline: Lubricate drive line; Inspect components for wear or damage Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298) Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents Performs other duties as assigned. Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 4 weeks ago (11/5/2025 2:37 PM) Requisition ID 2025-191059 Location (Posting Location) : State/Province NJ Location (Posting Location) : City EDISON Location (Posting Location) : Postal Code 08817 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $43.00/Hr. Max Pay USD $43.00/Hr.

A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including: • Observing and assisting in installing and repairing auto glass • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing • Providing additional services & products • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques. • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday. • Performs other duties as assigned • Complies with all policies and standards What you'll get: • Competitive weekly pay starting at $25.50/hour, increasing to $30.25/hour after training and certification. • Earn $5/set of wiper blades when added for customer safety. • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days. • Program to buy additional PTO or sell unused time up to 16 hours. • Up to $5,250 annually in tuition reimbursement. • Paid training and all the tools and resources you'll need to be successful. • View all our health, wealth, and life offerings at ************************* Education Qualifications • High School Diploma GED/Equivalent Preferred • Valid state-issued driver's license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds. • Ability to stand for extended periods, work in tight spaces, bend and twist body • Ability to use a variety of hand tools and power tools safely and effectively • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting” • Ability to work scheduled days, with flexibility on start and end times to accommodate customer's needs • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues • Problem-solving and ability to trouble-shoot issues, independently and collaboratively • Ability to read, write and interpret the English language and technical directions • Ability to communicate orally (via phone) and written (via computer or other electronic means) • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). #LI-JF1 This in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. This in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we're proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability.

Suffolk County Operation Must have experience; diesel preferred Air brakes system, DOT Pre-schedule Maintenance inspections Competitive salary Paid Holidays Job Type: Full-time Pay: $48,000.00 - $75,000.00 per year

JOB DESCRIPTION Job Title: JFK Station Mechanic Department: Maintenance Reports To: Outstation Line Maintenance Manager ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties and responsibilities include, but are not limited to: Conduct Terminating Service maintenance checks per the KA General Maintenance Manual at least every 50 flight hours. Accomplish all required servicing of the aircraft including wheel and brake replacement, engine oil servicing, replacing burnt out light bulbs, wiping down struts, etc. Troubleshoot and repair defects discovered and complete all return to service paperwork completely and on a timely basis. Forward copies of repair information to Maintenance Control as work is completed. Perform other duties as directed by the GMM, Maintenance Control or his supervisor. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Also required is an A&P license and previous 747 experience is desirable. Tools required as well. EDUCATION and/or EXPERIENCE High school graduate; some college and/or technical school desirable. LANGUAGE SKILLS Ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence. Ability to give verbal and written direction to assigned staff. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to reach with hands and arms, stand; walk; talk or hear; and use hands and fingers to handle, feel or operate objects, tools, or controls. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move more than 50 pounds, to eye level. Lift 10 pounds with each arm over your head Twist, turn with normal strength force Climb numerous flights of stairs Work on ladders, lifts and in some case high elevations Work in a squatted position Work in all weather conditions WORK ENVIRONMENT The work environment characteristics describe here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed primarily in a construction, maintenance setting. The noise level in the work environment is usually loud.

Company OverviewOur first SpeeDee Oil Change opened in December 1980 in Metairie, Louisiana. SpeeDee swiftly grew into a quick lube and automotive tune-up service business, and by the mid-90s, SpeeDee had added complete brake service and grown to a full-service auto maintenance and repair facility.For 40 years, SpeeDee has built trusted customer relationships based on reliability and professional service and grown from a single store to more than 150 locations. How Are We Different From the Competition? Local Ownership Quality Service Training and Certification Multi-Point Courtesy Check and Service Review Free Top-Off Service Maintenance Records Affordable Rates Safety You Can Trust SpeeDee takes the well-being of employees and customers seriously. We are following cleaning protocols and continuing to monitor CDC recommendations related to sanitation procedures associated with COVID-19.Job SummaryThe Fluid Services Technician is responsible for all fluid services including oil change, transmission, differential, cooling system maintenance and additional services including wiper blades and filter replacement). He/she communicates with customers, educating them on necessary preventive vehicle maintenance. Additional duties may include courtesy services, and tire repair and replacement services.Responsibilities Performing upper bay and lower bay oil change and inspection functions Explaining SpeeDee programs, services and pricing structure in order to achieve high customer satisfaction and increased revenues Attending training sessions that are applicable to the career path and position requirements Performing preventive maintenance on fluid services equipment Following appropriate safety procedures and notifying the Shop Manager of safety hazards or needed equipment repairs Requirements Commitment to excellence at all levels of service Good communication skills and upbeat personality Clean and neat appearance Valid state driver's license Other Duties and ResponsibilitiesIn addition to the duties listed above, every crew member is responsible for general center maintenance and cleaning duties such as mopping, washing center windows and clearing litter. Crew members must attend crew meetings as required, as well as other duties assigned by a supervisor.Job Qualifications Customer service skills Basic literacy (ready, writing, math skills) Ability and licensed to operate motor vehicles Verbal communication skills Ability to properly use mechanical hand tools Attention to detail No previous experience or training required Working Conditions Materials and Equipment used: Automotive oils, fluids, and lubricants. Windshield washer fluid, battery electrolyte Environment: Frequent exposure to outside weather elements, noise, and vehicle exhaust fumes throughout the entire shift. Physical Activities: Position requires good corrected vision, hearing, frequent standing, walking, climbing, stooping, crouching, handling, reaching, and lifting. Benefits/Perks Growth Opportunities Locally Owned and Operated Safety You can Trust Training and Certification Opportunities Competitive salary Excellent work environment Tools Provided Compensation: $14.00 - $16.00 per hour Let's talk about the SpeeDee Service Difference: Local Ownership Most SpeeDee stores are locally owned. They're run by families who service the automotive needs of other families in their communities. Quality Service SpeeDee was built on a solid commitment to customer service. Training and Certification SpeeDee owners hire ASE-certified technicians for tune-ups, mechanical work and other repairs. Advanced training is available through the SpeeDee Performance Certified program. Multi-Point Courtesy Check and Service Review Every time you bring your vehicle in for a 17-Point Oil Change, we'll also give you a multi-point courtesy check and a service presentation as an added bonus. Free Top-Off Service To help keep your car running smoothly and safely, SpeeDee offers a free top-off service for the 3 months or 3,000 miles following any SpeeDee oil change or tune-up service. Maintenance Records If you're not sure which services you need or which services you've already completed, don't worry. We'll keep track of your SpeeDee maintenance history and manufacturer's recommended service schedule. Affordable Rates Looking for an alternative to your dealership? Compare their prices to ours, and you may find that SpeeDee can perform the services you need at a lower cost. You Decide It's our policy to provide you with the information you need to make a decision without pressure or overselling. Visit your local SpeeDee today - no appointment necessary! This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchisee/franchise location, and not to SpeeDee Worldwide, LLC.