Diesel technician jobs in Wyoming

Independent Rebuild Specialist has been in business for 25 years and counting. We specialize in remanufacturing Caterpillar diesel engines. We are located in Brighton, Colorado. We are seeking candidates for a full-time position as an Entry Level Diesel Technician This role will require candidates that are knowledgeable about diesel engines and are willing to work closely with our lead techs. DUTIES AND RESPONSIBILITIES include, but are not limited to : Tear down and inspect large Caterpillar engines using proper tooling. Duties include the following: disassembling engine components, washing parts, drying parts, wire wheeling, lasering parts, and sandblasting. Help assemble engines using proper procedures and tools. Duties include the following: assembling engine components, assembling short blocks, and installing components. Must have a desire to learn and be trainable. Must have great attention to detail. Always keep the work area clean and in good working condition. Must be able to follow proper PPE protocols and safety instructions. Must be able to work in a high-production environment with minimal issues. Organize, stage, and move material as required. Must have forklift experience. Must be able to complete tasks with minimal supervision. Must be able to work within deadlines and meet specifications. Must be able to bend and lift 75 lbs. Must be able to proactively communicate with co-workers and management. REQUIREMENTS High School Diploma Valid Driver's License Vocational School Diploma Clean Driving Record PAY FREQUENCY Weekly (every Friday) - Direct Deposit HOURS PER WEEK More than 40 (preferred) BENEFITS OFFERED Paid Time Off Company Paid Holidays 100% Paid Health Insurance 100% Paid Dental Insurance 401K with Matching Contributions Uniforms Provided Tools Provided Relocation Package (If Applicable) Tuition Reimbursement JOB-TYPE Full-Time TOTAL COMPENSATION $25 - $30 per hour (based on experience) ADDRESS 189 N Kuner Rd Brighton, CO 80601 USA

Job Description IMMEDIATE OPENINGS!! Benefits and Perks: Pay: $40/hour On demand pay Overtime pay for hours worked over 40 hours Medical, Dental, and Vision health insurance elections 401K with a 4% company match Basic Life Insurance, Long Term Disability Insurance, and AD&D Insurance offered at no cost Voluntary STD, Life, Accident coverage, Hospital Indemnity, and Identity Theft Supplemental Life Insurance, Short Term Disability Insurance, and Accident Insurance available Safety Equipment provided Weekly Pay Pay Card option Online pay stub access 24-7 office support Qualifications and Skills: Minimum of 21 years of age Able to rebuild engines Able to work nights MUST HAVE DIESEL ENGINE CERTIFICATION MUST HAVE OWN TOOLS Minimum of 5 years' experience Must have a valid driver's license with approvable driving record Must be able to pass a drug test Speak, write, read, and understand English Job duties: Determine vehicle condition by conducting inspections and diagnostic tests to identify worn and damaged parts. Keep equipment available for use by completing preventive maintenance, installing component and part upgrades, controlling corrosion, and completing winterization procedures Correct vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics, and making adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units Verify vehicle performance by conducting test drives; adjusting controls and systems Comply with federal and state vehicle requirements by testing engine, safety, and combustion control standards Maintain vehicle records by annotating services and repairs Contain costs by using warranty; evaluating service and parts options Keep supplies ready by inventorying stock; placing orders; verifying receipt Enhance maintenance department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments Perform annual DOT Inspections Powered by JazzHR lKdMws5kdb

Job Details Sundance - Sundance, WY Full TimeDescription Purpose: Independently performs complex diagnostics, service repairs and maintenance work on customer and/or dealer-owned agricultural and turf equipment. May require some direction or guidance from the Service Manager, or Shop Foreman. Responsibilities: Performs diagnostics and repairs on John Deere equipment and technology Mentors Service Technician Trainees and Service Technicians Conducts or supports customer clinics Performs diagnostics and repairs in the field as required Accountable for billable time and assigned work orders Responsible for complete and thorough documentation of diagnostics and repairs performed on work orders and on time submittal of information May participate in Service EDUCATE Training programs required for the development of skills and knowledge Operates and maintains vehicles, tools and equipment required to perform job responsibilities Maintains a clean work area and performs work in a neat and orderly fashion Follows all safety rules and regulations in performing work assignments Maintains current knowledge of John Deere and competitive products Qualifications: Experience with truck and agricultural equipment tires is preferred Strong mechanical knowledge with attention to detail Proficiency in using tools and equipment for tire installation and repair Ability to diagnose tire-related issues and recommend appropriate solutions Self-motivated Ability to work independently and in a team environment Experience connecting with customers, maintaining a professional image and establishing rapport Demonstrated basic understanding of the selling processes Demonstrated ability to manage multiple projects simultaneously with a degree of independence Ability to lift, carry, and move heavy objects up to 100 pounds Must be able to drive forklift for unloading and loading tires Valid driver's license and clean driving record for service calls About Us: Company History: Founded in 1937 by Charles Jacob Grossenburg and his wife Blanche, Grossenburg Implement started as a small family business with a big vision: to provide cutting-edge farming technology and unmatched service to the local community. What began with a passion for selling John Deere tractors during WWII has blossomed into a generational company with a reputation for hard work, dedication, and innovation. Today, we proudly carry on this legacy as a fourth-generation, family-owned business. Our Mission: To provide the best product at a reasonable price with the highest level of service. Our Vision: Successfully maintain the core values of a generational business while embracing innovations in the industry, focusing on customer service, employee compensation, and community patronage. Our Heritage: For over 85 years, Grossenburg Implement has been a family-oriented company, dedicated to service, trust, and integrity. Founded by C.J. and Blanche Grossenburg, our business has been passed down through the generations, with each family member contributing to the company's ongoing success. Today, we continue to honor the traditions of those who built this company while looking to the future with pride and excitement. Why Join Us? At Grossenburg Implement, we are more than just a company-we are a family. From the day our founders, Charles and Blanche Grossenburg, opened their doors, we've built our business around family values, integrity, and dedication to service. Our work environment is collaborative, supportive, and driven by a sense of purpose to continue the legacy of service and growth. As part of our team, you will have the chance to contribute to the ongoing success of a company that's been part of the community for generations. What We Offer: A family-oriented and supportive work environment. Opportunities for professional growth and advancement. Competitive compensation and benefits package. The chance to make a meaningful impact on the company's financial health and long-term success.

Some of the various work scopes that we have include but are not limited to: Equipment inspections and repairs Internal engine repair 2 year PM experience Experience with Trailer repair We encourage our team to work professionally and be respectful to everyone. We also want our team to work in a safe workplace. We provide in -house training to technicians who want to further their knowledge regarding these different types of fields. Health Care SIPP Program Life Insurance Responsibilities Technicians must have good attendance and show a positive attitude. Technicians need to have their own tools and be ready to work at the beginning of the shift. Give detailed explanations of issues found on equipment and able to troubleshoot equipment failures. Meet deadlines on equipment needs and give updates to management if something unforeseen would delay the deadline. Use power tools and hand tools in a safe manner. Keep the work area clean and avoid safety issues around the work area. Qualifications Communication skills Class A or B Certification Preferred Dependability Positivity 2 years big rig experience Good troubleshooting skills Able to use power tools and hand tools to perform work. To follow safety guidelines and detailed work instructions. Able to work as a team and also able to work independently. Follow OSHA, DOT, guidelines and record necessary documentation records. Benefits: Dental Insurance Health insurance Life insurance Paid time off Retirement plan Vision insurance

Who We Are Cowboy Chrysler Dodge Jeep Ram is locally-owned and family operated, serving the Cheyenne, Wyoming area for over 40 years. Not only do we have a commitment and passion for our customers, we invest just as much into our employees. With our high volume, we are expanding and need highly motivated, driven individuals to join our team! What We Offer Unlimited hours, make your own check Coming soon - Brand New state of the art facility with all new equipment Paid Chrysler Training Apprentice Programs Work-life balance; flexible scheduling Top pay plans in the market Promote from within Career Pathing; dedicated leadership team High Volume store Paid Holiday & Vacation Days Responsibilities Performs work specified on the repair order with efficiency and in accordance with dealership standards Tests components and systems using diagnostic tools and special service equipment Diagnoses, maintains, and repairs vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning Communicates directly with the Service Advisor so that customers can be informed if any additional service is needed. Provide an estimate of time needed for additional repairs Executes repairs under warranty to manufacturer specifications Requirements High school diploma Must have at least 2 years of experience as an auto technician Ability to read and comprehend written instructions and information Knowledge in all aspects of automotive repair and maintenance Learns quickly Excellent oral and written communication skills Excellent customer service skills Team player Must have a valid driver's license in good standing Ensure that customer's cars are kept clean Maintain stall in an orderly and clean manner Ability to identify problems quickly Knowledge of automobiles Math, reading, and computer skills Ability to learn new technology, repair and service procedures and specifications Able to operate electronic diagnostic equipment

A collective energy and ambition. A place where you can make a real difference. We're a company that genuinely cares about our people, our products, our consumers and the environment. Our unique, informal culture champions courage, determination and collaboration. Knowing we have an open and supportive team means each of us has the freedom to take responsibility and ownership. We have a shared passion to work hard, innovate and push boundaries. United by the belief that when we strive for growth, anything is possible. While we might not be the largest company in our industry, we believe we can have the biggest impact because: Together We Have the Power to Win. Come join our Green River, WY facility where we manufacture products such as A&H Baking Soda, A&H Carpet Deodorizer, and A&H Laundry Detergent! The hourly wage for this position is $45.26 ROLE SUMMARY: Performs complex, skilled craftwork in the installation, maintenance and repair of mechanical components and equipment of a semi-automated manufacturing, packaging and distribution facility. DUTIES AND RESPONSIBILITIES (*denotes essential job functions): Knowledge of mechanical troubleshooting, steel fabrication, machine repair, rigging, plumbing and millwright skills. Performs preventive maintenance inspections of industrial equipment, i.e. screw conveyors, bucket elevators, etc. Troubleshoots and repairs mechanical systems including bearings, pumps, elevators, screws and compressors. Repairs mechanical components of electric motors. Fits and welds piping. Installs and maintains pumps, compressors, and related machinery performing alignments as needed. Occasionally performs rigging, ironworking, and boiler making. "B" or "C" Mechanics perform all of the above responsibilities as their skills and knowledge increase through on-the-job and technical training. Only Mechanics that have attained the "B" level classification or higher are allowed to provide maintenance shift coverage. Departmental requirements in order to be considered for the A+ role. Other job duties as required by Church & Dwight Co., Inc. MINIMUM EDUCATION, TRAINING, AND EXPERIENCE REQUIREMENTS: Minimum of a High School Diploma/GED is required. Multi-skilled industrial maintenance experience required. Demonstrated competency of the qualifications listed for each classification of Mechanic in the Maintenance Technician Skill Sets document. KNOWLEDGE, SKILLS, AND ABILITIES: Work any shift during the week, weekends, holidays and emergency callouts. Use safe operating procedures and judgement. Follow all facility rules to maintain quality and integrity of both raw materials and finished products. Lift 50 pounds consistently REQUIRED TRAINING: OSHA Safety Training WORKING CONDITIONS: Must be able to work and be comfortable in an industrial environment and chemical processing facility. Must possess the ability to maintain attention to detail despite interruptions. Church & Dwight is proud to be an Equal Opportunity Employer/Veterans/Individuals with Disabilities. For more information on our company, our brands and our culture visit us at ****************************

Job Description: Diesel Service Technician Customer satisfaction is a result of your personal work habits and ethics and is of utmost importance as part of your job function. The Diesel Service Technician is also responsible for setting goals for personal service improvement, and monitor progress against customer satisfaction index numbers and production numbers as provided by the Service Manager. Diesel Service Technicians perform work specified on maintenance and repair orders on Diesel Vehicles with efficiency and in accordance with dealership and/or Factory standards Diesel automotive technicians diagnose and repair vehicle automotive systems including engine, transmission, electrical, steering, suspension, braking, air conditioning, etc. to specification Diesel Mechanics provide labor and time estimates for additional automotive repairs Explain diesel mechanical diagnoses and required repairs in a non-technical manner to service advisors and customers Continuously learn new technical information and techniques in formal training sessions in order to stay abreast with rapidly changing technology. Inspect and test new vehicles and recording findings so that necessary repairs can be made. Job Requirement: As a Diesel Service Technician (Diesel Automotive Mechanic), you will be experienced and aware of the latest automotive technologies and be a persistent problem solver. We have determined some factors that may enable your success as an Diesel Service Technician: Factory Diesel Certified technicians HIGHLY preferred All Factory certified technicians considered and are encouraged to apply Willing to talk to recent tech school graduates Must hold a valid driver's license- good driving record required Team oriented, flexible and focused on maintaining a high level of customer service Working knowledge of shop equipment such as wheel and tire equipment, alignment system, diagnostic equipment, AC equipment, etc. We are an equal opportunity employer that promotes a drug-free work environment Ideal candidates will have: Experience in performing warranty and non-warranty inspections, diagnostic, maintenance, and repair service on various vehicle makes and models. Proven track record of achieving or over-achieving goals Outstanding communication skills Professional appearance and work ethic Great attitude with a high-energy personality Superior customer service skills Ability to read and comprehend instructions Ability to exercise good judgement Valid State drivers license and good driving record Compensation: We offer Very competitive pay, Medical. 401(k) program, paid vacation, and a professional work environment. Become a member of a winning team that offers growth opportunity, excellent earning potential and leadership that appreciates your drive, skills and ability. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug free workplace. Its Time To Make The Most Important Move Of Your Career! Apply Now! We Would Really Like To Hear From You!

We offer flexible shifts including 4 10's We give wage incentives for technicians holding a current CDE certification McCandless Truck Center is one of the region's premier Commercial Truck Sales & Leasing Dealerships, proudly serving the Cheyenne area for many years. Our team enjoys a fantastic culture and opportunities for advancement, which are company-wide focused to help you grow both personally and professionally. We're interested in helping you establish and build a long-term career with us, because we know that happy employees lead to happier customers! What We Offer: Health Insurance - 80% of employee premiums are company paid! Free Dental & Vision insurance for employees! Life Insurance Policy 401(k) plan with company match PTO and Vacation Days Training Fantastic Culture and Work Environment Immediate openings and we will cover the cost of your tool box move. SUMMARY Functions as an experienced technician who is able to perform diagnoses and repairs of most vehicle components with little supervision required. ESSENTIAL DUTIES Essential Duties include the following. Other duties may be assigned. Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards. Diagnoses cause of most malfunctions and performs repair. Communicates with parts department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines assigned vehicle to determine if further safety or service work is required or recommended. Communicates with service advisor immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair order. Road tests vehicles when required or refers to the test technician. Participates in manufacturer-sponsored training programs, schools, and events. Keeps abreast of manufacturer technical bulletins. Supervises work of any apprentice technicians as assigned. Reports machinery defects or malfunctions to supervisor. Ensures that customers' cars are kept clean. Notifies service advisor immediately of anything that has happened to change the appearance or condition of the vehicle. Keeps shop area neat and clean. Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as they were received. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management. MARGINAL DUTIES As assigned. EDUCATION and/or EXPERIENCE Two to four year's related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Half of the certifications of a master certified technician depending on area of expertise CDL PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; use hands to finger, handle, or feel; and climb or balance WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job; the employee is occasionally exposed to: Wet and/or humid conditions Moving mechanical parts Fumes or airborne particles Toxic or caustic chemicals Outdoor weather conditions Extreme heat Risk of electrical shock Vibration The noise level in the work environment is moderate

Job DescriptionBenefits: Bonus based on performance Employee discounts Flexible schedule Seeking technicians that LOVE their trade but just haven't found the right employer yet. Minimum 1 years experience is preferred. FULL TIME OR PART TIME may apply. Monday through Friday Flexible Work Schedules for 3-day, 4- day, or 5- day. Consider a job where you are respected, where people work as a family member. Consider a job with good working conditions and recently new top-notch equipment. We are a Nationally Branded with Locally Owned Auto Repair Shop in Cheyenne Wyoming Seeking auto technicians for most activities including: Transmissions, brakes, suspension, electrical, cooling, fuel systems, diagnosis, etc. ASE certifications are valued here too! This is a great opportunity to get into a specialty field for the right person. We pride ourselves in hiring the right individual that takes Pride in his work ethics to provide the customer with the best repairs available. To become one of the BEST!!! If you want to be part of a family that values its members as much as it values its customers, then we should talk. Dont work for corporate companies that treat you like a number. If you want to be in environment where you are appreciated and your thoughts are welcome, where you are encouraged to learn more every year with free training, then we should talk. Salary description Typically salaries are $60k to $110k or more, depending on experience.

Overview JOIN OUR TEAM! Your browser does not support the video tag. Whether you are looking to start your career as a Diesel Technician, or are an experienced industry veteran, Boss Shop has a position for you! With our wide-ranging Tech Ranking system from Tech I all the way through Tech IV, Boss Shops is an industry leader in full range Diesel repair! Boss Shops has many benefits to offer you that you will not find anywhere else like: 3-week training program for new Team Members Our new training program for advance level technicians Vacation after six months 401K and matching contributions Health, dental and vision insurance Short and long terms disability insurance Life insurance A clearly defined path for growth ASE testing paid for by us, including a $250 bonus for each test passed And much more! Boss Truck Shop offers on-demand pay (access to earned but not yet paid wages) through: Responsibilities Are you ready to work for an employer that cares about its employees? Come and work for a company that is willing to invest in your training and provides a clear path for growth! Come and join the Boss Shop Team! The Shop Diesel Mechanic/Technician is responsible for performing mechanical repairs in a timely and professional manner. Essential Job Duties/Functions: Performs PM's and oil changes. Greases trucks and trailers. Performs tire services. Performs CSA/DOT inspections. Performs service calls and night call outs. Conducts intermediate to Advance Electrical repair and diagnoses cause of failures. Completes intermediate to Advance Wheel End repair (S-cam/bushing replacement, spindle repairs, race and bearing replacement, wheel seals, ETC.) Performs intermediate air system repair (Basic diagnostics, tank replacement, air bags, leveling valves, dash valves, etc.) Conducts basic HVAC repair (evacuate & recharge, verifies cause of failure). Completes basic coolant repairs (thermostat, water pump, hoses, fittings, radiator, etc.) Performs basic welding Conducts basic starting/charging (batteries, alternators, starters, etc.) and diagnostics. Completes basic engine repair (belts, tensioners, pulleys). Performs basic steering/suspension (shocks, reservoirs, filters, alignment, etc.) Performs basic drivetrain and transmission repairs clutch adjustments, U-joints, carrier bearings, etc.) Maintains cleanliness of shop and keeps free of clutter Ensures all service equipment (jacks, tools, trucks) are in good working order, clean, and properly repaired when needed. Ensures all parts, tires, etc., are properly put away Completes work orders by providing the necessary customer information, labor performed, parts used, and any other information for warranty purposes. Ensures total customer satisfaction and the integrity of Bosselman. Practices and adheres to all company safety policies and procedures to ensure a safe environment for employees and customers. Completes OSHA Skills Demonstration within the first week of employment. Stays current on all LMS training. Provides friendly and competent customer service. Reports for work in a timely manner when scheduled. Additional Job Duties: Assists in other duties, as assigned. Supervisory Responsibilities: This job has no supervisory responsibilities. Qualifications Education and/or Experience (include certs or licenses needed): Tire Service Certified by TIA within 18 months of employment Air Brake Certification. DOT Medical Card required at Boss Shops. Two years minimum experience as a diesel technician Minimum Qualifications: Valid driver's license and be insurable to drive. Complete brake training. Complete wheel seal training. Ability to attend HVAC, Electrical and DOT training. Ability to get ASE, DOT, TIA and other certifications. Able to work weekends, holidays, and as needed. Must have reliable transportation and phone. Must be able to communicate in English. - IF APPLICABLE Able and willing to deliver friendly, courteous, and prompt customer service. Able and willing to work cooperatively with other team members. Must show proficiencies required by Tech I training program. Physical Requirements: The physical demands described here are representative of those that must be met by the Shop Technician II to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential functions, provided such accommodations do not create an undue hardship for the Company. The employee must occasionally lift and/or move up to 75 lbs., while performing the duties of this job, the employee is required to frequently stand, walk, use hands and fingers, handle or feel, reach with hands and arms, talk and hear; occasionally sit, climb or balance, stoop, kneel, crouch or crawl.

Maintenance Technician General Job Description: We are a medium sized over the road trucking company that runs heavy haul, multi axle and extendable trailers to transport heavy equipment, oilfield equipment, compressors, drill rigs, generators, buildings, etc. We are looking to add a maintenance mechanic to our team. This person will track routine and preventative maintenance for our fleet of trucks and trailers and complete repairs and maintenance tasks in the shop. This position will include some welding and fabrication as well as mechanical work on diesel engines, semi-trucks and trailers as well as wiring trailers for lighting. Detailed Description: Routine Maintenance Tracking: This position includes a fleet management view of the company's equipment, Keeping a detailed list of the maintenance status of all truck, trailer, jeep and booster equipment and what is upcoming for each piece of equipment. Track oil changes and other monthly or mileage required maintenance. Communicate with drivers about required maintenance and tire replacement Communicate with repair shops on the road. Repairs and Maintenance: Inspecting vehicle engine and mechanical/electrical components to diagnose issues accurately. Schedules repairs and maintenance at a shop on the road or the equipment to get into the shop for work to be completed. Inspecting vehicle computer and electronic systems to repair, maintain and upgrade. Conducting routine maintenance work aiming to vehicle functionality and longevity. Changing tires, brakes, performing Preventative Maintenance, troubleshooting wiring & a/c systems on 18 wheelers Welding: Must have some welding and fabrication experience. Best if experience has been on equipment, trucks and/or semi-trailers. On-Call Maintain and answer the company cell phone during your on-call hours. Pay for items such as Tires/Repairs, maintenance, hotels etc as approved by the office. Direct driver issues, load issues breakdowns to management as scheduled. Job Requirements: 2 Years Mechanical Experience with 18 wheelers 1 Year heavy machine mechanic, semi-truck, semi-trailer repair or similar. 1 Year Welding Advanced knowledge of diesel engines Submit to and pass a drug test. Location: This position is located in Rock Springs, Wyoming. The candidate will need to reside in Rock Springs, Green River or surrounding areas or relocate to the area. Salary Range $25.00 - $30.00 per hour dependent on experience with overtime after 40 hours. Supervisor position also available range $30.00-$35.00 per hour dependent on expertise. Powered by JazzHR PV6bhYg08Q

The Mechanic will maintain equipment and facilities with emphasis on mobile mining equipment. ESSENTIAL FUNCTIONS • Meet physical demands of job according to the physical demands analysis • Troubleshoot heavy mining equipment • Read, interpret and apply manuals and schematics information to job • Maintain safe work record, be proactive in safety habits and behaviors • Maintain compliance with state and federal regulations • Assist in work/tasks planning and organizing • Utilize team skills/tools and participate in focus groups, team's meetings, AIP's • Communicate with on-shift coordinator and operations personnel • Follow all mine safety requirements and best practices • Work 12 hour rotating shift • Attend all team meetings • Regular and predictable attendance • Other job assignments as requested • Comply with Company drug and alcohol testing $28.37 - $37.67 / hour

Job DescriptionSalary: Specializing in advanced hydraulic, engine, transmission, and power end repairs. This role requires minimal supervision, strong communication skills, and the ability to perform complex troubleshooting and repairs across various equipment. Key Responsibilities Advanced Diagnostics and Repair:Utilize diagnostic software for engine and transmission issues. Perform intricate repairs on engines (e.g., injectors, cylinder heads, bearings) and transmissions (e.g., sensors, solenoids). Troubleshoot and repair hydraulic systems, including advanced hydraulic formulas and calculations Electrical Systems:Conduct advanced troubleshooting and repair on electrical systems and electronic-controlled hydraulic components. Understand and interpret hydraulic and electrical schematics Equipment & Systems:Master the operation and theory of various equipment, including blenders and hydration units. Troubleshoot and repair greaser systems and their electronics. Perform root cause failure analysis Fabrication & Leadership:Weld and fabricate proficiently. Provide leadership and training to less experienced team members. Requirements Experience:3 to 5 years in the Oil & Gas Industry with advanced skills in industrial engine and transmission repair. Allison transmission 9000 series experience, twin disc TA90-8501 experience, and/or Cummins high horse power experience preferred. Skills:Advanced tool set, strong leadership abilities, and proficiency in hydraulic and electrical troubleshooting Physical Requirements Mobility:Prolonged standing and walking; ability to lift and move over 50 pounds Flexibility:Ability to bend, stretch, push, pull, and move as needed Availability:Capable of working overtime, including weekends, public holidays, and evenings Work Environment Rotation:Work between shop and field environments Conditions:Outdoor work in all weather conditions, exposure to noise, contaminants, dust, etc. We are an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, age, national origin or disability.

***This job has preference to qualified local job seekers within 60 miles of our Axis Gillette, WY facility. The primary role of the equipment Mechanic is to maintain and repair a variety of equipment including diesel engines, heavy trucks, workover rigs, pumping equipment, lifting equipment, and other rig and drill-out oilfield related equipment. The equipment mechanic will also perform the following but not limited to preventive and corrective maintenance, failure analysis, diagnostics, repairs, inspections, assembling and rebuilding of components or equipment (i.e.: engines, power trains, hydraulics, fuel systems, power generation, electrical codes, etc.) either in a shop or on location, with or without supervision. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Maintains, diagnoses, and repairs a variety of equipment including but not limited to: Diesel/gasoline engines Cat DDEC MTU Cummins Perkins Mack Transmissions Allison 4700ofs, 6000 Winches Electric Hydraulic High pressure pumps 0-3000psi 0-5000psi 0-10,000psi Work over rigs Late model and 300hp to 600hp Centrifugal pumps Air compressors Pneumatic valve and system Hydraulic systems Mobile/overhead crane Gear boxes PTO's 12 and 24-volt electrical systems Chassis and suspension Rims, tires, and wheel Forklifts Electro-mechanical equipment Wellhead and supporting equipment Other types of oilfield related equipment Execute required procedures for preventative maintenance and appropriate inspections required by Axis and customer Perform basic troubleshooting with electrical, mechanical, hydraulic, and pneumatic systems Repair and refurbish hydraulic power equipment Install and/or replace new or reconditioned repair parts Read and follow repair manual and perform repairs as listed in manuals Read and interpret basic measuring equipment Operate and maintain power equipment and lifting devices and follow-up with basic testing of equipment for proper operation Order parts as necessary for equipment with prior approval Troubleshoot breakdowns and issues on various types of oilfield well service equipment Be prepared at all times for calls from operators for troubleshooting issues, either at the shop or at wellsite Perform proper diagnosis based on troubleshooting on mechanical equipment Conduct routine maintenance or repair work including engine and transmission overhaul or unit engine swings, involving cleaning and lubricating parts Repair and maintain machinery and rotating equipment, such as motors, engines, mud pumps, drum brakes, draw works, swivels, laydown machines, high pressure fluid ends and power ends (frac pumps) Solid experience in disassembly and reassembly of non-working equipment to like-new working conditions, followed by extensive safety and operational condition checks before distributed to the field Ability to work as a team when working around the shop and field crews and assist other maintenance employees Work will be in the shop or in field on rig and services equipment depending on work assignment Complete proper paperwork as assigned Minimum Qualifications (Knowledge, Skills, and Abilities) High School Diploma, GED or equivalent; Certification from trade or technical school in maintenance or Diesel repair highly preferred Five (5) years or more solid and proven work experience on oil field equipment or similar field with diesel engines and hydraulics Valid state-issued driver license; Class A or B license is preferred - a plus Strong and proven hydraulic knowledge Must have heavy experience in maintenance and repair on very complex hydraulic systems and know the difference between open loop and closed loop hydraulic equipment systems Prefer knowledge with laptop-based software for troubleshooting such as CAT Electronic Technician, CUMMINS INSIGHT, ALLLISON TRANS, MACK TECH TOOL, DETROIT DDEC, and MTU Would like to see experience with CAT C-15, Cat C-32, Detroit 14 liter, MTU 16v2000 tier 2 and tier 4, CM 850 Cummins Qsx 15, Allison 750 series, 4750 OFS, 6000, and 8000 series trans. Cotta drop boxes, Cooper right angle boxes, 224 twin disk Air clutches Ability to demonstrate safe work habits and work well with others in a team environment Work may be performed in all weather conditions Ability to lift heavy equipment up to 75 lbs. Ability to access the work environment by use of a ladder at heights of 50 ft. or more Long periods of standing, squatting, kneeling, reaching or similar activities may be necessary Able to perform duties with protective equipment, working near or with heavy tools and moving machinery Mobility, including entering confined spaces, enter areas by the use of ladders or other access devices; ability to bend, stoop, twist, stand, squat, crawl and walk Ability to work in a fast-paced environment and handle multiple tasks at once Basic problem solving and organizational skills Reliable telephone (cell phone) communication and transportation Able to clear pre-employment drug/alcohol and job-relevant screens

KLX Energy Services LLC provides a broad range of technical solutions and equipment to our customers. We provide the right people, best equipment and most convenient locations to deliver expert energy services for every phase of the wellsite. This includes drilling, completions, re-fracing, production, workover, and plug and abandonment. From technical services and wireline to rentals and accommodations, we keep our customers operations running economically, effectively and safely. At KLX, you'll work side-by-side with devoted professionals. You'll enjoy the benefits of a strong and evolving company; such as excellent compensation and benefits packages, limitless opportunities for professional growth, and a voice in shaping our future. All while working in an environment that emphasizes teamwork, integrity, and professionalism. We are currently seeking a Mechanic for our Gillette, WY location. PURPOSE: Performs physical tasks in the shop, warehouse, or field in support of operations including, but not limited to: inspection, repairs and maintenance of equipment, troubleshooting, interpretation of equipment manuals, and training/mentoring. ESSENTIAL JOB DUTIES AND RESPONSIBILTIES: Provides emergency/unscheduled repairs of equipment; reviews equipment status with operational personnel and performs scheduled maintenance repairs of trucks and equipment. Inspects, repairs, maintains, and makes recommendations and performs modifications to functional parts of a variety of equipment and machinery. Diagnoses maintenance requirements on diesel engines, transmissions, drive lines, differentials, electrical circuits, AC power plant, hydraulic systems, and chassis through diagnostic aids, inspections, and interpretation of equipment reports with assistance. Disassembles, overhauls, and replaces worn parts on equipment as required. Trouble shoots on conventional and specialized equipment and control with assistance Reads and interprets equipment manuals and work orders to perform required maintenance and service. May perform gas and arc welding as required in routine maintenance. Assists in training and mentoring maintenance technician trainees; orients operators in maintenance procedures and field maintenance for specialized equipment. MINIMUM QUALIFICATIONS: Education: Less than High School Education Work Experience: 0-2 years Related Experience: Mechanical skills should include, but are not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of trucks, cranes and related equipment. Valid driver's license and acceptable driving history PREFERRED QUALIFICATIONS: Education: High School Diploma/Equivalent Work Experience: 2-4 years Related Experience: Relevant experience as maintenance technician in oil and gas industry Class A CDL Current HSE certifications PHYSICAL REQUIREMENTS: Precise hand/eye coordination: Constantly Basic keyboarding or other repetitive motions: Frequently Operation of heavy equipment or operation of vehicles: Occasionally Lifting/pushing objects weighing over: 50 lbs: Frequently Climbing and working in awkward and cramped positions: Occasionally Other (please specify): Ability to work safely in a shop / warehouse environment EOE/Minorities/Females/Veterans/Disabled. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

KLX Energy Services LLC provides a broad range of technical solutions and equipment to our customers. We provide the right people, best equipment and most convenient locations to deliver expert energy services for every phase of the wellsite. This includes drilling, completions, re-fracing, production, workover, and plug and abandonment. From technical services and wireline to rentals and accommodations, we keep our customers operations running economically, effectively and safely. At KLX, you'll work side-by-side with devoted professionals. You'll enjoy the benefits of a strong and evolving company; such as excellent compensation and benefits packages, limitless opportunities for professional growth, and a voice in shaping our future. All while working in an environment that emphasizes teamwork, integrity, and professionalism. We are currently seeking a Mechanic for our Gillette, WY location. PURPOSE: Performs physical tasks in the shop, warehouse, or field in support of operations including, but not limited to: inspection, repairs and maintenance of equipment, troubleshooting, interpretation of equipment manuals, and training/mentoring. ESSENTIAL JOB DUTIES AND RESPONSIBILTIES: * Provides emergency/unscheduled repairs of equipment; reviews equipment status with operational personnel and performs scheduled maintenance repairs of trucks and equipment. * Inspects, repairs, maintains, and makes recommendations and performs modifications to functional parts of a variety of equipment and machinery. Diagnoses maintenance requirements on diesel engines, transmissions, drive lines, differentials, electrical circuits, AC power plant, hydraulic systems, and chassis through diagnostic aids, inspections, and interpretation of equipment reports with assistance. Disassembles, overhauls, and replaces worn parts on equipment as required. * Trouble shoots on conventional and specialized equipment and control with assistance * Reads and interprets equipment manuals and work orders to perform required maintenance and service. * May perform gas and arc welding as required in routine maintenance. * Assists in training and mentoring maintenance technician trainees; orients operators in maintenance procedures and field maintenance for specialized equipment. MINIMUM QUALIFICATIONS: Education: Less than High School Education Work Experience: 0-2 years Related Experience: * Mechanical skills should include, but are not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of trucks, cranes and related equipment. * Valid driver's license and acceptable driving history PREFERRED QUALIFICATIONS: Education: High School Diploma/Equivalent Work Experience: 2-4 years Related Experience: * Relevant experience as maintenance technician in oil and gas industry * Class A CDL * Current HSE certifications PHYSICAL REQUIREMENTS: Precise hand/eye coordination: Constantly Basic keyboarding or other repetitive motions: Frequently Operation of heavy equipment or operation of vehicles: Occasionally Lifting/pushing objects weighing over: 50 lbs: Frequently Climbing and working in awkward and cramped positions: Occasionally Other (please specify): * Ability to work safely in a shop / warehouse environment EOE/Minorities/Females/Veterans/Disabled. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Full-time Description Are you ready to join the winning team? At Gills Point S, our team has a common goal of providing exceptional service to our customers, while also ensuring that each employee feels valued, respected, and engaged in contributing to our success. With our strong reputation for family values and operational ethics, we are eager to add more team members who want to grow with us. Our Level 2 Mechanic is a highly skilled and detail-oriented position and critical to the success of our team. In this role, you will be responsible for inspecting, diagnosing, and repairing a variety of vehicles and machinery, ensuring that they operate safely and efficiently. You will work on various systems within the vehicle, including the engine, transmission, brakes, and electrical system, among others. RESPONSIBILITIES to include, but are not limited to: Engine Repair: Proficiency in diagnosing and repairing common engine issues such as replacing worn-out or damaged components, such as spark plugs, belts, hoses, and gaskets. Ability to conduct basic engine tune-ups and address minor engine repairs to ensure proper engine performance and longevity. Proficiency in inspecting and maintaining the radiator, hoses, thermostat, and water pump to prevent overheating and ensure efficient engine cooling. Ability to diagnose and repair cooling system leaks, flush the coolant, and replace components when necessary to maintain proper engine temperature. Suspension and Steering: Proficiency in inspecting, diagnosing, and repairing power steering, wheel alignment, and front/rear suspension components Proficiency in ensuring vehicle stability through knowledge of tire wear patterns, alignment specs, and system calibration. Brakes: Proficiency in the repair of brake systems, including hydraulic systems, disc and drum brakes, power assist units, and parking brakes. Demonstrated skills in servicing ABS and ESC Electrical/Electronic Systems: Proficiency in diagnosing and repairing electrical issues, including troubleshooting wiring problems, testing, and replacing fuses and relays, and addressing issues with lights, switches, and electrical components. Knowledge of electrical schematics and the use of multimeters and other diagnostic tools to identify and rectify electrical faults in the vehicle's · Ability to use diagnostic tools and scanners to identify and interpret trouble codes, assess sensor readings, and diagnose common vehicle issues. Heating & Air Conditioning: Proficiency in diagnosing and repairing HVAC systems including heating, ventilation, air conditioning, and climate control. Proven ability to handle refrigerants, test system performance, and repair A/C compressors, blower motors, and control systems in compliance with environmental regulations. These skills correspond to the following ASE Certifications: A1, A4, A5, A6, A7. ASE certifications are not required, and we will help you obtain them during employment. Requirements High School Diploma or GED required, vocational training or technical training program in automotive service technology or a related field preferred. ASE Certification preferred, or a willingness to attain it with our full support and assistance 5+ years of hands-on practical experience. Proficiency in using diagnostic equipment, hand tools, and power tools is essential. A valid driver's license and acceptable driving record. Problem-Solving Skills: Ability to quickly identify issues and develop solutions is critical. Attention to Detail: Precision in diagnosing problems and making repairs is necessary to ensure vehicles and machinery are operating safely and efficiently. Physical Stamina and Dexterity: often work in physically demanding environments and must be able to handle tools and components comfortably. Organizational Skills: Keeping track of multiple repairs, parts orders, and schedules requires strong organizational capabilities. Willingness to Continue Learning: As technology advances, ongoing training and education are essential to stay current with automotive trends and techniques. We offer: Paid time off Stable working hours Excellent Training - with opportunities for training and career advancement Medical, dental, vision, LTD, STD, Life Insurance, and Accidental Benefits available after 60 days Competitive wages 401(k) savings plan with company match Salary Description $24.00 to $34.00 per hr, DOE.

Job DescriptionBenefits: 401(k) Bonus based on performance Health insurance Opportunity for advancement Paid time off Training & development About Us At The Tire Den, were more than just a tire shopwere a trusted local business dedicated to providing top-quality automotive service with honesty and integrity. Were looking for an experienced Mechanic to join our friendly, hardworking team. What Youll Do - Diagnose, maintain, and repair a variety of vehicles. - Perform tire services, brake work, alignments, suspension, and general repairs. - Use diagnostic equipment to identify mechanical issues. - Communicate clearly with service advisors and customers about repairs. - Maintain a clean, safe, and organized work environment. What Were Looking For - 2+ years of mechanic experience (ASE certification a plus). - Strong troubleshooting and repair skills. - Ability to work independently and as part of a team. - Excellent attention to detail and commitment to quality work. - Valid drivers license and clean driving record. Why Youll Love Working Here - Competitive pay based on experience. - Employee discounts on tires and services. - Flexible scheduling. - Supportive, family-oriented atmosphere. NO PHONE CALLS PLEASE!

Bighorn Airways is seeking a motivated and mechanically inclined individual to join our Maintenance team as a Mechanic Apprentice. This is an excellent opportunity to begin a career in aviation maintenance under the guidance of certified A&P Mechanics, with a clear path toward certification and advancement. Key Responsibilities: Assist certified A&P Mechanics with airframe, powerplant, and propeller repairs and modifications. Participate in the removal, disassembly, and installation of aircraft components. Support testing and troubleshooting of aircraft systems. Operate power tools and equipment safely and effectively. Maintain accurate maintenance records in compliance with FAA and company standards. Follow all safety protocols and use required PPE. Document On-the-Job Training (OJT) tasks weekly, including aircraft type, ATA code, and hours. Demonstrate consistent progress toward A&P certification through OJT, classes, and self-study. Qualifications: High school diploma or equivalent required. Ability to read, write, and understand English for technical documentation. Basic proficiency in Microsoft Office Suite. Strong attention to detail and mechanical aptitude. Ability to drive support equipment and company vehicles. Physical Requirements: Ability to stand, kneel, and work in awkward positions. Capable of lifting up to 70 lbs. Comfortable working on ladders and scaffolding. Visual and auditory acuity for equipment inspection and testing. Exposure to noise, chemicals, and machinery. Program Overview: This position is part of Bighorn Airways' FAA-compliant Mechanic Apprenticeship Program, designed to help apprentices meet the experience requirements of 14 CFR Part 65, Subpart D. Apprentices will work toward eligibility for Airframe and/or Powerplant certification through structured training and performance milestones. Expectations: Maintain punctuality and professional conduct. Follow supervisor instructions and maintain productive work habits. Adhere to safety standards and contribute to a clean work environment. All work must be inspected and signed off by a certified mechanic. Additional Information: This position is subject to DOT pre-employment and random drug and alcohol testing. Reasonable accommodations will be made for individuals with disabilities. Ready to launch your aviation career? Apply today and become part of a team that values safety, quality, and professional growth.