Senior Electrical Engineer jobs at DLR Group

Now Hiring: Senior I&C Designer + I&C Designer (2 Roles) | Hybrid or Fully Remote We're supporting a long-standing engineering group that is preparing for a significant wave of new project work arriving in early 2025. As they scale, we're helping them bring on two Instrumentation & Controls Designers-one Senior-level and one Mid-level-to join a collaborative, well-established team. These roles offer the chance to work on meaningful industrial and power-focused design projects with highly experienced I&C engineers and designers. If you're looking for stability, hands-on design ownership, and a team that values accuracy, quality, and mentorship, this is a strong fit. Location & Work Model Ideally Bothell, WA, but fully remote candidates across the U.S. are welcome to apply Hybrid available for those near an office Little to no travel Pay Range Senior I&C Designer: $36-60/hr I&C Designer (Mid-level): $30-50/hr Senior Instrumentation & Controls Designer What You'll Do You'll take a lead role in delivering complete I&C design packages-guiding design efforts, coordinating with multiple engineering disciplines, and ensuring the accuracy and quality of project deliverables. You will: Develop full I&C drawing sets: wiring diagrams, loop sheets, installation details, network architecture, junction boxes, etc. Lead and schedule design work for yourself and a small design team Check work for compliance with specifications, standards, and the SOW Perform and oversee drafting in AutoCAD (2D/3D) or Revit Place instrumentation in 3D models using SmartPlant 3D, AutoCAD Plant 3D, or Revit Support limited engineering functions under I&C engineering personnel Mentor junior designers and maintain project documentation Provide occasional support to Construction and Start-Up teams Track drawing registers and maintain ISO 9001-compliant revision histories What You Bring AA in Drafting, AS in Instrumentation/Industrial Automation, or similar technical education 6+ years of industrial or power plant I&C design experience Deep understanding of instrumentation types, installation practices, and drafting standards Strong AutoCAD 2D/3D skills and experience with the SmartPlant Suite (SPI, SPPID, SP3D) Ability to read and incorporate P&IDs into I&C design Solid understanding of electronics, PLCs, DCS, transmitters, and electrical fundamentals Strong communication skills and the ability to work with minimal supervision Experience leading design work and mentoring others Instrumentation & Controls Designer (Mid-Level) What You'll Do You'll support the preparation of I&C design packages and work alongside senior team members to deliver accurate, high-quality drawings and models. Responsibilities include: Creating I&C drawings from notes, sketches, vendor materials, SOW/DBD guidance Drafting in AutoCAD (2D/3D) or Revit Placing instrumentation in 3D models using SmartPlant 3D, AutoCAD Plant 3D, or Revit Cataloging instrumentation and producing reports Producing installation details and material take-offs Reviewing vendor and discipline drawings Supporting Construction and Start-Up teams as needed Maintaining ISO 9001-compliant document revisions Collaborating with designers and engineers to ensure interface accuracy What You Bring AA in Drafting, AS in Instrumentation/Industrial Automation, or equivalent 2+ years of I&C design experience (industrial or power preferred) Strong AutoCAD skills and familiarity with SmartPlant tools Understanding of instrumentation types, drafting standards, and P&ID interpretation Strong math foundation (algebra and trigonometry) Basic understanding of PLCs, DCS, and electrical fundamentals Motivated, detail-oriented, and able to work independently with moderate supervision Why These Roles Stand Out Stable, well-supported engineering group with consistent project wins Opportunities for mentorship (both giving and receiving) Flexible work model-including fully remote for the right candidates A chance to influence and deliver full-cycle I&C design packages Team culture built on collaboration, accuracy, and professional growth Interested? If you'd like to explore either opportunity, feel free to reach out directly or send along a resume. We're happy to walk through the details, team structure, and answer any questions.

Job Title: PCB Designer - REMOTE Onsite Requirements: Strong Xpedition / Mentor Graphics PCB Layout Expertise Experience Designing Complex Multilayer HDI Boards (Preferably for Military/Aerospace) Ability to Work from Engineering Inputs & Deliver Full, Accurate PCB Documentation Job Description: Client Systems has an immediate opening for a Contract Printed Circuit Board Designer. A Contract Printed Circuit Board Designer assists engineers in the design and development of complex, detailed layouts of printed circuit boards used in airborne and other demanding environments. In this position, the Contract Printed Circuit Board Designer will be responsible for creating multilayer high-density printed circuit board designs using Mentor Graphics tools (Xpedition PCB Layout, Autorouter, Drawing Editor, DMS, etc.) per Electrical and Mechanical Engineering input in a highly structured development environment. The fabrication drawing package will be created per IPC and/or MIL specifications. Responsibilities: You will perform detailed layout design and documentation of printed circuit boards under the direction of electrical and mechanical engineers. You will work from schematics, net lists, part lists, and basic description of the board function, constraints, configuration, and arrangement as defined by electrical and mechanical engineers. You will check drawings against the project input for correctness and conformance to standard engineering drafting practices and standards. You will create electronic library symbols, geometry, footprints, etc. You will work with system management including file maintenance, backup and storage, and other tool improvements. Knowledge Skills and Abilities: Ideal candidates demonstrate a passion for innovation and a strong sense of ownership. The candidate has experience designing high-count multilayer complex printed circuit boards. Is well versed in MIL and IPC Standards. Is familiar with the current Siemens/Mentor Graphics tools: Xpedition Design and Layout PCB, Valor (artwork checking tool), Constraint Editor/Constraint Manager (CES), Drawing Editor. **This client is a US Federal Government contractor and is legally required to hire US Citizens. US Citizens will only be considered for this role**

Job Title: PCB Designer - REMOTE Onsite Requirements: Strong Xpedition / Mentor Graphics PCB Layout Expertise Experience Designing Complex Multilayer HDI Boards (Preferably for Military/Aerospace) Ability to Work from Engineering Inputs & Deliver Full, Accurate PCB Documentation Job Description: Client Systems has an immediate opening for a Contract Printed Circuit Board Designer. A Contract Printed Circuit Board Designer assists engineers in the design and development of complex, detailed layouts of printed circuit boards used in airborne and other demanding environments. In this position, the Contract Printed Circuit Board Designer will be responsible for creating multilayer high-density printed circuit board designs using Mentor Graphics tools (Xpedition PCB Layout, Autorouter, Drawing Editor, DMS, etc.) per Electrical and Mechanical Engineering input in a highly structured development environment. The fabrication drawing package will be created per IPC and/or MIL specifications. Responsibilities: You will perform detailed layout design and documentation of printed circuit boards under the direction of electrical and mechanical engineers. You will work from schematics, net lists, part lists, and basic description of the board function, constraints, configuration, and arrangement as defined by electrical and mechanical engineers. You will check drawings against the project input for correctness and conformance to standard engineering drafting practices and standards. You will create electronic library symbols, geometry, footprints, etc. You will work with system management including file maintenance, backup and storage, and other tool improvements. Knowledge Skills and Abilities: Ideal candidates demonstrate a passion for innovation and a strong sense of ownership. The candidate has experience designing high-count multilayer complex printed circuit boards. Is well versed in MIL and IPC Standards. Is familiar with the current Siemens/Mentor Graphics tools: Xpedition Design and Layout PCB, Valor (artwork checking tool), Constraint Editor/Constraint Manager (CES), Drawing Editor. **This client is a US Federal Government contractor and is legally required to hire US Citizens. US Citizens will only be considered for this role**

Job Title: PCB Designer - REMOTE Onsite Requirements: Strong Xpedition / Mentor Graphics PCB Layout Expertise Experience Designing Complex Multilayer HDI Boards (Preferably for Military/Aerospace) Ability to Work from Engineering Inputs & Deliver Full, Accurate PCB Documentation Job Description: Client Systems has an immediate opening for a Contract Printed Circuit Board Designer. A Contract Printed Circuit Board Designer assists engineers in the design and development of complex, detailed layouts of printed circuit boards used in airborne and other demanding environments. In this position, the Contract Printed Circuit Board Designer will be responsible for creating multilayer high-density printed circuit board designs using Mentor Graphics tools (Xpedition PCB Layout, Autorouter, Drawing Editor, DMS, etc.) per Electrical and Mechanical Engineering input in a highly structured development environment. The fabrication drawing package will be created per IPC and/or MIL specifications. Responsibilities: You will perform detailed layout design and documentation of printed circuit boards under the direction of electrical and mechanical engineers. You will work from schematics, net lists, part lists, and basic description of the board function, constraints, configuration, and arrangement as defined by electrical and mechanical engineers. You will check drawings against the project input for correctness and conformance to standard engineering drafting practices and standards. You will create electronic library symbols, geometry, footprints, etc. You will work with system management including file maintenance, backup and storage, and other tool improvements. Knowledge Skills and Abilities: Ideal candidates demonstrate a passion for innovation and a strong sense of ownership. The candidate has experience designing high-count multilayer complex printed circuit boards. Is well versed in MIL and IPC Standards. Is familiar with the current Siemens/Mentor Graphics tools: Xpedition Design and Layout PCB, Valor (artwork checking tool), Constraint Editor/Constraint Manager (CES), Drawing Editor. **This client is a US Federal Government contractor and is legally required to hire US Citizens. US Citizens will only be considered for this role**

We are seeking a highly skilled and experienced Senior Electrical Engineer with a focus on Power and Controls. The ideal candidate will have a strong background in electrical engineering, with at least 10 years of experience and a Professional Engineer (PE) license. This role involves designing, developing, and implementing power systems and control solutions that enhance operational efficiency and safety. Key Responsibilities: Design and develop electrical power systems, including high and low voltage equipment. Analyze and optimize power distribution systems and controls to meet performance specifications. Collaborate with cross-functional teams to integrate electrical systems into larger projects. Conduct feasibility studies, risk assessments, and technical evaluations for electrical designs. Lead projects from conception through execution, ensuring compliance with industry standards and regulations. Prepare and review technical documentation, including specifications, reports, and schematics. Provide mentorship and guidance to junior engineers and technical staff. Stay updated on industry trends, technologies, and best practices to drive innovation. Troubleshoot and resolve electrical issues in existing systems and propose solutions for enhancements. Qualifications: Bachelor's degree in Electrical Engineering or a related field (Master's degree preferred). Professional Engineer (PE) license is required. Minimum of 10 years of experience in electrical engineering, with a focus on power systems and controls. Proficient in electrical design software (e.g., AutoCAD, ETAP, or similar). Strong understanding of industry standards (IEEE, NEC, etc.) and safety regulations. Experience with project management methodologies and tools. Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills, with the ability to collaborate effectively with diverse teams.

At I.C. Thomasson Associates, Inc, A Salas O'Brien Company we tell our clients that we're engineered for impact. This passion for making a difference applies just as much to our team as it does to our projects. That's why we're committed to living our values every day: inspiring, achieving, and connecting as shared owners of our success with a focus on a sustainable future. Building for the long-term means that all of our team members can expect to work on amazing projects with a people-first approach to problem solving. It also means that each member of our team has truly limitless potential to build a unique, meaningful, and high-impact career-and they'll receive great total rewards along the way. About Us: Founded in 1975, Salas O'Brien is an employee-owned engineering and professional services firm focused on achieving impact for our clients, our team, and the world. We know that tomorrow's requirements are today's opportunities, and we are here to design lasting solutions for pressing challenges. We work across a variety of industries providing integrated engineering and consulting services. Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our technical expertise is paired with an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day. Job Summary: The ideal candidate to fill this position is an Electrical Engineer that is competent and confident in his/her abilities as an electrical engineer, especially with experience in commercial work. This person would be a Project Manager of multiple projects, work with an internal MEP/FP team to deliver projects that meet the objectives of the architect/owner. Business Development acumen is important, so understanding business development is a plus and opens many avenues for advancement. These activities may include developing an action plan to solicit and secure new work, implementation of goals, objectives, and priorities for the Nashville office, identifying prospective markets and clients, etc. Responsibilities: Knowledge of electrical engineering principles in the field of building construction. Capable of increasing technical competency with experience and work ethic. Ability to effectively communicate with architects, owners and contractors. Ability to work well independently and as part of a strong team. Excellent organization and time management skills . ICT encourages the growth of all our engineers to take a more responsible and leadership role based on experience. Qualifications: B.S. in Electrical Engineering 7+ years of work experience with complex building electrical systems in the commercial and institutional sector. Registered Professional Engineer, with Tennessee P.E. license, or ability to obtain a Tennessee P.E. license. Experience with Revit Excellent written and oral communication skills essential for team-based projects. Excellent planning and organizational skills required for simultaneous project schedules. Highly motivated, proactive and willing to take on new challenges. Willing to travel. Benefits: Gain invaluable industry experience and practical engineering skills. Work with a diverse team of professionals, fostering networking opportunities. Access to mentorship and guidance from experienced engineers. Competitive compensation package. Location: Nashville, TN Travel: Equal Opportunity Employment Statement Salas O'Brien provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state/provincial, or local laws. Salas O'Brien will accommodate the disability-related needs of applicants as required by law.

Job Responsibilities • Design/develop advanced Printed Circuit Boards (PCBs) for Power Supplies, Battery Chargers, and Battery Management Systems that meet real-world needs • Create, simulate, and test complex mixed-signal circuits using tools like SPICE and MATLAB • Drive designs through rigorous qualification testing to meet industry standards such as DO-160, MIL-STD-704, and MIL-STD-461 • Lead Preliminary Design Reviews (PDR) and Critical Design Reviews (CDR) to ensure the design meets technical, cost, and schedule objectives while aligning with stakeholder expectations • Resolve challenges in existing products while delivering reliable, next-generation solutions • Use lab tools (oscilloscopes, DAQ, DMMs) to troubleshoot, validate, and perfect your designs • Develop detailed test plans, reports, and acceptance procedures to ensure your designs excel in performance and reliability Background/Requirements • A Bachelor's degree in Electrical Engineering (Master's preferred). • 7+ years of hands-on experience in circuit design with a focus on power electronics (AC/DC, DC/DC converters, battery chargers) • Expertise in analog and digital design, with strong preferred skills in PWM control, Power MOSFETs, and IGBT technologies • A proven ability to own designs - from initial schematics to final product testing • Familiarity with EMI/EMC principles and mitigation strategies • Proficiency in lab equipment (oscilloscopes, signal generators, DMMs) to troubleshoot and validate designs. • Experience designing to meet industry standards like DO-160 and MIL-STD-704. • Strong understanding of simulation tools (MATLAB, SPICE) to validate and optimize designs. • A solid foundation in C/C++ programming for embedded systems (a plus). • A passion for innovation, problem-solving, and growing into a leadership role.

We are looking for a junior-mid level Electrical Engineer with strong PCBA experience and exposure to supplier quality. This role blends hands-on electrical engineering with quality support across PCBA builds, incoming inspection, and supplier issue resolution. This position is ideal for someone who enjoys hardware, understands how boards are built and tested, and wants to gain experience across both product development and supplier quality-without requiring senior-level design ownership. Location: East Bay Area Compensation (Full Time): $130,000-$145,000 (DOE) Key Responsibilities: Electrical Engineering (50-60%) Support electrical testing, bring-up, and PCBA debugging Review schematics, layouts, and assembly drawings; create supporting test documentation Execute board-level validation and record clean, accurate test data Assist with component evaluations and engineering change updates Perform electrical troubleshooting during prototype and development builds Collaborate with systems, mechanical, and manufacturing engineering teams Supplier Quality Engineering (40-50%) Provide technical feedback to suppliers on PCBA build quality and assembly issues Support incoming inspection and identify workmanship or electrical concerns Assist with NCRs, issue tracking, and quality documentation Participate in DFM reviews and provide actionable feedback Drive corrective actions and verify effectiveness through electrical testing Review supplier test reports, workmanship standards, and compliance to specs Maintain quality records and support quality-system requirements Required Qualifications Bachelor's degree in Electrical Engineering, Electronics, or related field 2-4 years of experience with PCBAs, electrical assemblies, or electronics manufacturing Ability to interpret schematics, layouts, and BOMs Hands-on experience with common test equipment (multimeter, oscilloscope, power supplies) Familiarity with PCBA manufacturing processes and component-level troubleshooting Preferred Qualifications Exposure to supplier quality processes, DFM feedback, NCRs, or corrective actions Knowledge of standards such as IPC-A-610 or ISO 9001 Experience working with contract manufacturers or external suppliers Background in FA, RCA, or reliability activities (not required but beneficial) Ideal Candidate Profile Comfortable balancing both engineering and quality responsibilities Hands-on, detail-oriented, and confident communicating with suppliers Enjoys PCBA-level technical work and identifying issues early in the build cycle Strong problem solver who thrives in fast-paced development environments Interested in growing into electrical, manufacturing, or quality engineering career paths #IND-SPG Estimated Min Rate: $130000.00 Estimated Max Rate: $145000.00 What's In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh's network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh's extensive talent community that will provide you with access to Yoh's vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week) Health Savings Account (HSA) (for employees working 20+ hours per week) Life & Disability Insurance (for employees working 20+ hours per week) MetLife Voluntary Benefits Employee Assistance Program (EAP) 401K Retirement Savings Plan Direct Deposit & weekly epayroll Referral Bonus Programs Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit ************************************************ to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh's hiring clients' preferences. To learn more about Yoh's privacy practices, please see our Candidate Privacy Notice: **********************************

A respected engineering consulting firm is seeking an Electrical Engineer to contribute to high-performance building projects in Oregon. You will play a key role in designing electrical system design, collaborating with multidisciplinary teams, and delivering innovative solutions. Are you looking to join a firm that elevates the built environment? If so, please reach out to learn more. The Electrical Engineer will be responsible for... Designing electrical systems for healthcare and education facilities. Coordinating with architects and other engineering disciplines for integrated design. The Electrical Engineer should have the following qualifications... 4+ years of experience, preferably in healthcare or education sectors. Proficiency in AutoCAD and Revit, familiarity with energy modeling tools is a plus. Strong understanding of electrical system design principles. Benefits / Perks Flexible hybrid schedule Diverse impactful across Oregon Professional growth and mentorship opportunities.

Electrical Engineer - MEP Nelson + Pope is seeking a qualified Electrical Engineer to work in the Mechanical Electrical Plumbing Department in our Melville, New York office for an immediate start. The work includes electrical design to support for new building construction and renovation projects, as well as lighting, utility and distributed energy projects. Responsibilities/Top Skills/Qualifications: support partners, project managers and senior technical staff preparation of permit, construction and bid documents proficient in AutoCad knowledge of Revit preferred site visits for field investigations and measurements shop drawing review detail oriented and commitment to producing high-quality work ability to work independently or in collaboration with a team proficient in Microsoft Office good communication, organizational & time management skills Nelson + Pope offers a competitive salary commensurate with level of education and professional experience and offers strong health, paid time off, work life balance, 401K, and other benefits. Extensive learning and educational work environment with strong day to day mentorship as well as formal training opportunities. Candidates must have a valid driver's license and be willing and able to commute to our Melville office for this on-site position (non-remote). Non-local candidates are encouraged to apply, and relocation assistance may be available where appropriate. The interview process is succinct. Nelson + Pope is proud to be an Equal Opportunity and Affirmative Action Employer. We evaluate qualified applicants without regard to race, color, national origin, religion, sex, sexual orientation, gender identity, disability, protected veteran status, and other statuses protected by law. In compliance with the Immigration Reform and Control Act of 1986, we will hire only U.S. citizens and aliens lawfully authorized to work in the United States (if the position is or will be one which is subject to U.S. law). Verification of employment eligibility will be required at the time of hire. Salary Range: $80K to $115K

JOB - Electrical Engineering Manager. TERM - Permanent RATE - $160,000 - $180,000 per annum + bonus + ESOs We're on the lookout for an experienced Electrical Engineering Manager to take ownership of end-to-end electrical design for complex consumer electronic systems. The position is focused on the development SOC- and MCU-based systems, working on everything from analog and digital circuitry to communication interfaces, sensors, motors, and power systems. You'll work hand-in-hand with firmware developers, product leaders, and cross-disciplinary teams to transform cutting-edge ideas into fully realized products - always focused on delivering high performance, cost-effective solutions with a seamless user experience. Key Responsibilities End-to-End Electrical Design: Take ownership of electrical system development from initial concept through to mass production - including brainstorming, schematic capture, prototyping, validation, and production support. Circuit & Hardware Engineering: Design and troubleshoot analog and digital circuitry, power systems (including switch-mode power supplies), high-speed interfaces (displays, cameras), wireless connectivity (Wi-Fi, Bluetooth), and a range of embedded sensors (IMUs, proximity, hall effect, etc.). Validation & Testing: Define and implement comprehensive hardware validation plans. Perform hands-on bench testing and generate detailed technical reports outlining results and recommendations. Team Integration: Collaborate with firmware engineers to support hardware-software integration and board-level bring-up. Engage in peer reviews and provide input on iterative design improvements. Design Optimization: Focus on delivering robust, efficient, and scalable designs that balance high performance with cost-effective manufacturing. Cross-Team Collaboration: Work alongside product teams and multidisciplinary engineering groups to drive innovation across a portfolio of next-generation connected household devices. What You'll Bring Bachelor's degree in Electrical, Electronic, or Computer Engineering (or equivalent experience) 7+ years of experience in electrical engineering, with 3+ years in a lead role Deep understanding of embedded systems and low-level hardware Strong hands-on experience with digital and analog circuit design, PCB CAD tools (preferably Altium), and hardware debugging Proficiency with communication protocols like UART, SPI, I2C, BLE, Wi-Fi Familiarity with lab equipment: oscilloscopes, signal generators, power supplies, DMMs, network analyzers Experience with sensors, motors, actuators, and user interface components Basic understanding of firmware development and EMC/EMI best practices Strong initiative, attention to detail, and ability to lead cross-functional collaboration If you're an experienced Electrical Engineering Manager eager to lead the development of impactful, innovative products, we'd love to hear from you. Apply now or contact Jack Smillie at ****************** for further details.

Yoh is looking for a Electrical Test Engineer to come in and join our Biotech/ Pharma client for their state of the art manufacturing building. The ideal individual will come in with Bachelor's degree in Engineering: Mechanical, Electrical or Manufacturing with 7+ years of experience, or MS/ PhD with 5-7 years of experience. Industry: Bio Tech/ manufacturing Location: Pleasanton CA Compensation: $60-68/hour DOE Type: 6 month Contract Responsibilities Interfaces with design engineering and Product Management to coordinate the release of new products. Work with design engineering to provide DFM/A feedback during the design phase. Design and develop manufacturing test fixtures as required. Proactively communicate technical information and status to broad, cross-functional teams Develop and refine acceptance test processes and specifications of complex electromechanical subsystems while working cross functionally with manufacturing, R&D, and contract manufacturers. Required Skills (NPI Test Engineer) Bachelor's degree in Engineering: Mechanical, Electrical or Manufacturing with 7+ years of experience, or MS/ PhD with 5-7 years of experience. Work history with several successful iterations of Design to Manufacturing transfers. Creation of FMEAs, ECOs and work instructions Working knowledge of motor (eg., servo, stepper), PCA, and subassembly testing Experience with designing and testing PCB Experience working with instrument manufacturing under ISO 9001 or ISO 13485 standards Experience with Altium, Python, and SDK development Experience with Snowflake, Labview, and MES systems a plus Estimated Min Rate: $60.00 Estimated Max Rate: $68.00 What's In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh's network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh's extensive talent community that will provide you with access to Yoh's vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week) Health Savings Account (HSA) (for employees working 20+ hours per week) Life & Disability Insurance (for employees working 20+ hours per week) MetLife Voluntary Benefits Employee Assistance Program (EAP) 401K Retirement Savings Plan Direct Deposit & weekly epayroll Referral Bonus Programs Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit ************************************************ to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh's hiring clients' preferences. To learn more about Yoh's privacy practices, please see our Candidate Privacy Notice: **********************************

Hour: Monday - Friday 7:30am - 4:30pm Pay: $58,100 - $77,400 Direct Hire **Must be US Citizen or Permanent Resident ***Must be able to pass a background check/drug screen, cannot test positive for marijuana An industry leading manufacturer of gas and liquid analyzers is seeking an Electrical Engineer to join their team. This individual will be responsible for designing, developing, modifying, and evaluating electronic parts, components, or integrated circuitry for electronic equipment, and/or other hardware systems. Determines design approaches and parameters. Selects components and equipment based on analysis of specifications and reliability. May also review vendor capability to support product development. May use computer-assisted engineering and design software and equipment to perform assignments. Applies principles and techniques of electrical engineering to accomplish goals. Works under general supervision. Exercises judgment within defined procedures and practices to determine appropriate action; a certain degree of creativity and latitude is required. Job Duties: · Provides analysis related to the design, development, and implementation of electronic parts, components, or integrated circuitry for hardware systems. · Develops test strategies, devices, and systems. · Plan and implement research methodology and procedures to apply principles of electrical theory to engineering projects. · Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. · Performs stress and performance tests on a variety of computer hardware including circuit boards, processors, and wiring. · Operate computer-assisted engineering and design software and equipment to perform engineering tasks. · Designs and modifies PCB/PCA's using ECAD software. · Prepares and studies technical drawings, specifications of electrical systems, to ensure conformity to standards and customer requirements. · Generates architecture for functional components and assists with product architecture. · Delivers hardware designs through prototype, beta, and production release in compliance with product development process and quality practices. · Supports existing products by troubleshooting and failure analysis. · Participates in technical design reviews of existing designs and peer reviews. · Compile data and write reports regarding existing and potential engineering studies and projects. · Briefs others on deliverables, status, and progress. · Documents and demonstrates solutions by developing documentation, flowcharts, layouts, diagrams, and charts. · Provides information by collecting, analyzing, and summarizing development and service issues. · Intermediate level experience with design of analog and digital circuits · Ability to test designs to specification. · Circuit analysis skills using applied calculus and algebra, including component stress analysis. · Strong analytical, problem solving, communication and project management skills are required. · Daily availability to include evenings and weekends when necessary to reach goals and deadlines. Qualifications: · Bachelor's degree in a related field · 2 - 5 years directly related experience and/or training · Must have experience with Altium Software · Experience with Functional Safety (SIL) and ATEX Intrinsic Safety (Ex'ia') is a plus · Individuals that have strong communication skills, problem solvers, and project management skills are helpful All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Job title: Electrical Engineer Annual Salary: $100,000 - $140,000 per annum & Job Title: An exciting high technology Electronics Engineering and Manufacturing Company located in Dallas (Texas) is now hiring for a brand new Electrical Engineer with an Electronics Hardware Design background to join the team and business who have a strong team culture and vibrant working environment. Salary on offer: The annual salary on offer for the successful Electrical Engineer is $100,000 - $140,000 per annum, depending on skillset and experience. Summary of the Electrical Engineer Role: The successful Electrical Engineer will be responsible for the system electronics, leading system architecture definition and validation, and working closely within a multi-disciplined team to ensure timely product delivery. Electrical Engineer Key Skills: 5+ industry professional experience Experience in the full product design lifecycle from concept to production Electronics Circuit Design (analogue, digital & power circuit design) PCB Design & Schematic Capture Experience of Altium Designer, OrCAD, Cadence Allegro Experience of microcontrollers & microprocessors Network interfaces - SPI, I2C, USB, UART, RS232/485 Embedded C, C++, Python, VHDL, GUI - Strong plus Knowledge & experience of CPLD & FPGA - Strong plus PLC programming, integration, and troubleshooting (Allen-Bradley, Siemens, or similar platforms) Product safety & compliance - EMC, EMI, LVD, CE Marking, FCC, UL Strong lab experience for bring-up and verification of new hardware Good teamwork, communication skills and being a self-starter Benefits Package: 401K retirement plan Unlimited PTO Medical & Dental Healthcare Vision Insurance EAP If you are interested in the above exciting Electrical Engineering position and think you have the skills required to join the successful company and to be working on new exciting technologies, please don't hesitate to apply and contact Frank Kanjanda on ******************** or call *************** for more information.

$95,000 - $130,000 Depending on Experience plus full benefits, annual bonus, 401(k) match 4%, profit sharing, PTO, short- and long-term disability RemX is seeking a Controls Engineer to design electrical systems, develop PLC/HMI software, and support automated packaging equipment for a global OEM. The ideal candidate will have experience with PLC programming, electrical schematics, panel design, and supporting equipment startup and troubleshooting. This role offers the opportunity to work with advanced automation technology and contribute to high-performance packaging machinery used worldwide. Note: This position requires 10% travel $95,000 - $130,000 DOE plus full benefits, annual bonus, 401(k) match 4%, profit sharing, PTO, short- and long-term disability 3+ years of PLC/HMI programming and electrical design experience Work with automated equipment used in advanced packaging and processing systems Join a global OEM known for innovation, technical depth, and long-term employee development The Company: Over 50+ year-old OEM manufacturing company of high-precision machinery, particularly for the industrial automation and manufacturing industries Become part of a team-focused technical group that values collaboration and teamwork Excellent Compensation: $95,000 - $130,000 DOE plus full benefits, annual bonus, 401(k) match 4%, profit sharing, PTO, short- and long-term disability The Position: Design and develop PLC, HMI, servo, and motion control programs for automated packaging machinery (Rockwell, Siemens, B&R) Create and update electrical schematics, control panel layouts, and power distribution designs using AutoCAD Electrical Support equipment startup, debugging, and commissioning at the facility and occasionally at customer sites Provide troubleshooting support to assembly teams and field service technicians for electrical and software-related issues Develop system upgrades, enhancements, and solutions for field-reported issues Collaborate with engineering and project management to support project schedules and machine build timelines Ensure all designs follow applicable regulations including NEC, NFPA 70, and cGMP Participate in training, trade shows, and technical events to stay current with industry trends and competitive technologies The Details: 3+ years of experience in automation, controls engineering, or machinery manufacturing Hands-on experience with PLCs, HMIs, and motion control systems (Rockwell, Siemens, B&R)

About Us: We are working with a mission-driven SaaS company dedicated to keeping people safe. They're passionate about public safety and strive to create innovative solutions that keep their customer's happy. Job Description: As a Senior Staff Engineer, you will play a crucial role in building and maintaining our cutting-edge web applications. You will work closely with our engineering team to design, develop, and deploy robust, scalable, and user-friendly features. Onsite in Tampa, FL Area Up to 220k base salary Responsibilities: Design, develop, and maintain backend applications using Ruby on Rails. Build user-friendly and responsive frontend interfaces using React. Collaborate with cross-functional teams to define and implement new features. Write clean, well-tested, and efficient code. Qualifications: Strong proficiency in Ruby on Rails, React, and React Native. Experience with relational databases (e.g., PostgreSQL). Solid understanding of JavaScript and web development fundamentals. Familiarity with RESTful APIs and microservices architecture.

JOB - Control System Engineer SALARY - $95,000 - $125,000 per annum TERM - Direct Hire A growing industrial machinery manufacturer is seeking an experienced Control System Engineer to join their team and work on the development and implementation of control systems for complex automated equipment. The Control System Engineer will ideally have the following attributes: Bachelor's degree in Electrical Engineering, Computer Programming, Industrial Automation, or a related field. 2+ years of experience in PLC and HMI programming for automated machinery. Expertise with Allen Bradley platforms (Studio 5000, Connected Components Workbench, FactoryTalk). Proficiency in programming PLCs using Structured Text, Ladder Logic, and Function Block Diagrams. Solid understanding of control system hardware including VFDs, relays, sensors, pneumatics, and analog I/O. Strong ability to diagnose and troubleshoot electrical and mechanical systems. Ability to read and interpret schematics and electrical diagrams. Experience with AutoCAD Electrical and knowledge of UL, NEC, and NFPA standards. The Control System Engineer's duties will involve: Designing, programming, and testing PLCs and HMIs for custom automation equipment. Managing projects from initial design through testing and customer acceptance. Debugging code, troubleshooting issues, and supporting final system commissioning. Documenting software changes and system sequences of operation. Collaborating with engineering, shop, and service teams to ensure successful integration and support. Providing remote technical support to field technicians for deployed machines. For more information about this Control System Engineering role, please apply, or contact Jack Smillie at ******************* who will be able to provide more details on the opportunity. Many thanks, Premier Group

Hardware Engineer - Wilsonville, OR (Onsite | Full-Time) This position involves creating and supporting advanced electronic designs used in complex technology products. You'll participate in architecture planning, schematic development, board-level design, and hands-on validation work, collaborating closely with other engineering groups throughout the project lifecycle. Key Responsibilities: Develop digital circuits, processor-based boards, real-time systems, and related hardware components Lead high-speed design projects from initial concept through production release Evaluate and select components in partnership with vendors and internal teams Produce and review schematics, block diagrams, and design documentation Guide PCB layout activities and ensure alignment with project requirements Perform board bring-up, functional testing, and troubleshooting to resolve hardware issues Work with software/firmware teams during system integration and performance tuning Participate in technical reviews and provide input on requirements and feasibility Qualifications: 5+ years of experience in hardware development or related engineering disciplines Background working with high-speed designs or communication-oriented hardware Familiarity with schematic and PCB tools such as Cadence or OrCAD Understanding of PCB stack-up, layout constraints, and signal-integrity concepts Strong debugging abilities and experience using common lab instruments Core Competencies: Strong organization, planning, and problem-solving skills Ability to manage multiple tasks in a fast-paced environment Professional communication and confidentiality Works well independently and as part of a team Detail-oriented with strong follow-through Education: Bachelor's or Master's degree in Electronic Engineering or a related field Benefits: Medical, dental, and vision coverage Company-paid short- and long-term disability Flexible spending accounts Generous paid-time-off plan 401(k) with company matching Professional development opportunities Collaborative and supportive work environment On-site fitness facilities All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

DLR Group is an integrated design firm with a promise to elevate the human experience through design. This fuels the work we do around the world and inspires our mission to improve the lives of our clients, our communities, and our planet. If this sparks your interest, you're in the right place. Our Engineering team has an opening for an Electrical Engineering intern. This is a seasonal position for Summer 2026 and will require approximately 40 hours of work per week in the office. We have multiple positions and locations available. Please refer to all openings posted and apply to the locations that are most suitable to your living situation during the course of your internship. Position Summary: As an Electrical Engineering Intern at DLR Group you will be responsible for assisting in the design process of electrical building systems from schematics through construction administration on a wide range of building types. As part of our integrated design teams you create buildings that elevate the human experience through design. About EPX at DLR Group: As an intern at DLR Group, you will be a part of our Emerging Professional Experience Program. The EPX program provides diverse perspectives on the needs of a design enterprise, and the possibilities for experiences and growth within the design profession. The goal is to provide a strong foundation to build your career on and explore opportunities within the AEC industry. The program is composed of three major components: mentorship, work, and weekly classes. These classes include EP-specific onboarding, design culture, marketing and business development, sustainability, design technology, communication style education, mentoring, resource and project management, construction site opportunities, research, equity, design agency, and career next steps. You will hear from some of our top executives and integrated designers during this time! The successful candidate will: Work with a licensed engineer designing electrical systems for new construction and/or building renovation projects Attend design team meetings with an electrical engineer and observe the coordination that occurs among the team members of a multi-disciplinary design team Assist an electrical engineer with the design and development of construction documents primarily using Revit Visit an active construction site (contingent on the status of local construction projects) Required Qualifications: Enrollment in an ABET-accredited Electrical Engineering or Architectural Engineering program Must be eligible to work in the United States without need for work visa or residency sponsorship Preferred Qualifications: Passed the Fundamentals of Engineering (FE) exam At least a third-year student in an accredited engineering program Interest in architectural building design Experience or interest with BIM (e.g. Autodesk Revit MEP) workflow At least a third-year student in an accredited engineering program Our comprehensive Benefits at DLR Group include medical, dental, vision, disability, wellness programs, flex spending, paid holidays, and paid time off. We also offer a 401(k) plan, employee stock ownership, and bonus opportunities. Compensation considerations are based on location, experience, and skills. The suggested pay range for this position is: Pay Range$20-$26 USD DLR Group is an integrated design firm delivering architecture, engineering, interiors, planning, and building optimization for new builds, renovations, and adaptive reuse projects. We are 100% employee-owned: every employee is literally invested in our clients' success. At the core of our firm are interdisciplinary teams engaged in every step of project lifecycles. Our teams champion true collaboration, open information sharing, shared risk and reward, value-based decision making, and proficient use of technology to deliver exceptional design. We are pursuing the goals of the 2030 Challenge, the ME2040, and the SE2050, and are an initial signatory of the China Accord and the AIA 2030 Commitment. Through our values - commitment, creativity, environmental stewardship, fun, integrity, ownership, sharing, teamwork - we elevate the human experience through design, together. DLR Group follows a four-day in-office work model, with employees having the flexibility to work somewhere other than the office on Fridays. We are proud to be an Equal Opportunity/Affirmative Action/M/F/Veteran/Disabled employer.