dnata jobs in New York, NY

We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance-and the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. This is a high-impact, fast-response role supporting programs where performance shortfalls must be diagnosed and corrected on aggressive timelines. You will bridge simulation, measurement, and practical implementation to deliver solutions that work-quickly and reliably. Key Responsibilities: Rapidly assess existing antenna and array designs for performance gaps against requirements. Diagnose and resolve issues related to mutual coupling, beam distortion, impedance mismatch, and bandwidth limitations. Recommend and implement design modifications for immediate performance improvements. Perform accelerated free-space radiation pattern measurements and compare results against simulations. Run high-fidelity EM simulations (HFSS, CST, FEKO, or similar) under compressed schedules for fast validation. Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility. Support urgent production and field troubleshooting, including on-site technical interventions when required. Collaborate with RF systems engineers to ensure antenna performance aligns with system-level budgets and phase stability. Produce clear, actionable evaluation reports for program stakeholders, often under short deadlines. Mentor junior engineers in rapid diagnostic and problem-solving methods. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of antenna design and/or evaluation experience in radar, communications, or EW systems. Expert understanding of antenna theory, EM propagation, polarization, and impedance matching. Proven ability to mitigate mutual coupling in dense or phased-array configurations. Experience delivering high-quality antenna evaluations and solutions under aggressive timelines. Proficiency with EM simulation tools such as HFSS, CST, FEKO, GRASP. Hands-on experience with antenna measurement in both anechoic chambers and open-air ranges. US Citizenship with ability to obtain and maintain a security clearance. Preferred Skills: Experience with low-observable and conformal antenna designs. Familiarity with wideband, multiband, and frequency-agile antenna systems. Exceptional problem-solving and communication skills for high-pressure, time-sensitive projects. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Imagine a career that truly takes you places, where you get to travel and meet new people every day along the journey. For 100 years, our Greyhound Drivers have been the heart and soul of our company, serving the transportation needs of communities across the nation. Do you enjoy meeting new people and have a passion for safety and the customer experience? Interested in a job that pays you to travel? Come join us in serving America's passengers as we continue our legacy of putting the wheels in motion. Responsibilities: Operate a bus in a safe and efficient manner, adhering to traffic laws and safety regulations Follow designated routes and schedules, making necessary adjustments when required Ensure the safety and comfort of passengers by providing assistance when needed and maintaining a clean bus Perform pre-trip and post-trip inspections to ensure the bus is in good working condition Maintain a clean and orderly bus, including regular cleaning of the interior and exterior Report any maintenance issues, accidents, or incidents to the appropriate authorities Assist passengers with boarding, exiting, and securing their personal belongings Follow emergency procedures and respond to incidents in accordance with company protocols Keep records of miles driven, fuel usage, and other required documentation Stay updated on company policies and safety procedures Qualifications: Fully Licensed with Class A or B Commercial Driver's License (CDL) Possesses Passenger 16+ endorsement and no air brake restriction 22 years of age or older Able to pass a DOT physical and pre-employment drug screen Full-time employment consideration only Ability to work varied schedule based on regional driver needs Benefits Medical, Dental, and Vision Plans 401K with company-matched contributions Life Insurance Paid Vacation, Holidays, and Sick Days Free Travel Passes Annual Uniform Allowance Driver Union membership & representation Career Advancement Opportunities Compensation Range: USD $29.40 - USD $31.28 /Hr.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees. Current benefits being offered include: Competitive Wages. The anticipated starting pay range for the position is $25 to $30 but is commensurate with skills and related experience, Health/Dental/Vision/Prescription Drug Plan with a company contribution to each, Health Savings Accounts and Flexible Spending Accounts, 401K Retirement Savings Plan: Crown matches 100% of the first 4% of your eligible pay you contribute to the plan. You are always 100% vested in the company matching contributions. Company paid Life and Disability Benefits as well as optional supplemental term life insurance offerings, Paid Parental Leave, 9 Paid Holidays, Paid Vacation accrued at a rate based on length of service and position, Paid Sick Leave, Birthday Pay for Non-Exempt employees, Tuition Reimbursement up to $5,250 per calendar year, and much more. EOE Veterans/Disabilities

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Springfield MA - Industrial Electrician The Opportunity: We are searching for a skilled Industrial Electrician to maintain, troubleshoot, and repair electrical and mechanical industrial equipment in our corrugated packaging plant in Springfield, MA. The successful candidate will be qualified to troubleshoot and repair both electrical and mechanical components on large scale production machinery, participate in PMs, support continuous improvement initiatives, and adhere to all safety regulations. You will provide resolutions to mechanical and electrical problems on a wide variety of paper and packaging machinery to keep our plant running at peak performance. What We Offer: A career with a Fortune 500 company where Sustainability, Safety and Inclusion are business drivers and foundational elements of your daily work. Opportunities to advance and learn alongside accomplished leaders in the Corrugated Packaging industry. If you live for machine up time, come join our best-in-class maintenance team! Opportunities to advance and learn alongside accomplished leaders in the Corrugated Packaging industry. An attractive rate of pay and top-tier benefits, reflecting skills, competencies and potential. The rate for this role is up to $40 an hour. You will work in a collaborative work environment where safety is our priority. How You Will Impact Smurfit Westrock: Focus on maintaining equipment in working order through preventive maintenance and troubleshooting mechanical and electrical failures in a fast-paced environment. Enforce plant safety regulations and encourage employees to become safety conscious. Perform scheduled preventive maintenance on electrical equipment, including motors, motor control centers (MCCs), transformers, switches, and wiring. Diagnose, troubleshoot, and repair electrical faults in complex machinery such as corrugators, printing presses, die cutters, and material handling systems. Troubleshoot and maintain Programmable Logic Controllers (PLCs) (e.g., Allen-Bradley, Siemens) and Human-Machine Interfaces (HMIs). Install, maintain, and calibrate various sensors, transducers, and measuring instruments. Ensure all electrical installations and repairs comply with the National Electrical Code (NEC), local codes, and company standards. Strictly adhere to Lockout/Tagout (LOTO) procedures and other plant safety policies. Maintain and repair high-voltage equipment and control systems. Keep accurate records of all maintenance work performed, parts used, and system documentation. Assist with the installation and commissioning of new production equipment and control systems. Collaborate with mechanical, hydraulic, and pneumatic technicians to resolve complex operational issues. Participate in root cause analysis of failures to implement corrective actions and improve machine reliability. Provide support for mechanical maintenance tasks as needed to ensure production uptime including predictive and preventative maintenance. What You Need to Succeed: Minimum of 3-5 years of experience as an Industrial Electrician, preferably in a manufacturing environment (corrugated, paper, or heavy industry experience is a significant plus). Proven experience working with 480V three-phase systems and various control voltages. Proficiency with electrical test equipment (e.g., multimeters, ammeters, megohmmeters). Expert knowledge of electrical schematics, blueprints, and wiring diagrams. Strong aptitude for troubleshooting and programming PLCs and Variable Frequency Drives (VFDs). Massachusetts Electrical license or the equivalent certification Willingness to work on both mechanical and electrical projects. Excellent safety awareness and commitment to safe work practices. Strong mechanical aptitude and problem-solving skills. Ability to work independently, manage time effectively, and handle emergency repairs under pressure. Excellent communication skills High School Diploma or equivalent required; college degree or technical certification is a plus. Physical Requirements: Ability to stand, walk, climb, and lift up to 50 lbs. regularly. Ability to work in a loud, fast-paced industrial environment, which may include exposure to heat, dust, and chemicals. This role is primarily the first shift; however, the successful candidate must be willing to work shifts, weekends, and on-call as required to support operations. The starting rate is $34-40 per hour based on experience, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation will be granted, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by 12/20/25 #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

f you're looking for a new place for your career to thrive and continue your professional growth, I have just the thing for you! A great Board Certified Behavior Analyst (BCBA) opportunity for in-home services in the Fort Hood, TX area. The collaboration and support of our team along with the kiddos we serve are sure to bring success and fulfillment to your career journey. Bring your passion for pediatrics and ABA to the family of clinicians you've been searching for today! Position Details: Full-Time or Part-Time opportunities available until 6 pm! Compensation of $90,000-$100,000/year between base salary and monthly bonuses! $5K sign-on bonus! New grads encouraged to apply! Responsibilities: Administers, conducts, evaluates and supervises the implementation of behavioral assessment measures (e.g., VB-MAPP, Vineland) and functional assessment measures Develops individualized, evidence based, culturally sensitive goals and objectives for home, community, and center-based programs Designs behavior support plans based on functional assessment data Ensures appropriate behavior data collection systems are implemented such that quantifiable behavioral data is collected at regular intervals to allow for the continual evaluation of behavior plans and the achievement of individualized data driven goals and objectives Trains and supports behavior therapists on the proper implementation of educational and clinical behavior programs and plans, data collection systems, etc. in the home, community, and center Conducts regular parent training and consultation, per prescribed plan Completes re-assessments and writes reports per insurance guidelines Participates in regular clinical meetings Agrees to complete 28 (twenty-eight) hours of patient care time each work week. Completes documentation of services in a timely manner Qualified Behavior Analysts supervise RBTs Remains current regarding research and evidence-based practices Completes competency assessments for RBTs per HealthPro Pediatrics policy timelines Competently delivers services via telehealth, when necessary Maintains accurate and up to date "CAQH" profile and NPI Collaborates and coordinates care with other evidenced based disciplines, medical providers, educators Completes and maintains all mandatory in house trainings, including telehealth, within the corresponding organization policy timeline Completes accurate billing practices in the electronic practice management system Strictly adheres to Behavior Analyst Certification Board's "The Professional and Ethical Compliance Code for Behavior Analysts". Additional tasks, as assigned by supervisor. Qualifications: Required: Master's Degree or PhD in Applied behavior Analysis, education or other related field Required: CURRENT AND ACTIVE Board Certification as a Behavior Analyst by the Behavior Analyst Certification Board and licensure if applicable per state Required: Experience working with children ages 0-16 implementing ABA; experience implementing the principles of Applied Behavior Analysis; Educational, Speech, or Allied Health Services experience Required: 3-5 years working with children with developmental disability Preferred: Experience working with children ages 0-16 implementing ABA in a classroom or clinical setting; experience implementing the principles of Applied Behavior Analysis; Educational, Speech, or Allied Health Services experience We consider all qualified candidates for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other characteristic protected by law. Our employment decisions, including those related to hiring, promotion, and compensation, are made based on individual qualifications, performance, and organizational needs.

If you're looking for a new place for your career to thrive and continue your professional growth, I have just the thing for you! Great full-time Center Director - BCBA opportunity at our ABA and outpatient, peds clinic in Plymouth, MA. The collaboration and support of our team along with the kiddos we serve are sure to bring success and fulfillment to your career journey. Bring your passion for pediatrics and therapy to the family of clinicians you've been searching for today! Position Details: Full-Time Compensation of $100,000-$123,000/year between base salary and monthly bonuses! 10-15 hours billable requirements for Directors Meaningful Impact: Play a pivotal role in the lives of children and their families by helping them overcome challenges and achieve milestones in speech, physical, occupational, or ABA therapy. Growth Opportunities: Enjoy continuous learning and development opportunities tailored to support your professional growth. Collaborative Culture: Thrive in a supportive environment where teamwork, respect, and open communication are at the heart of everything we do. Commitment to Excellence: Join a team recognized for clinical expertise and commitment to delivering high-quality care and outcomes. Competitive Benefits Package: Enjoy competitive compensation along with a comprehensive benefits package designed with YOU in mind! Join Us in Making a Difference . Responsibilities: Administers, conducts, evaluates and supervises the implementation of behavioral assessment measures (e.g., VB-MAPP, Vineland) and functional assessment measures Develops individualized, evidence based, culturally sensitive goals and objectives for home, community, and center-based programs Designs behavior support plans based on functional assessment data Ensures appropriate behavior data collection systems are implemented such that quantifiable behavioral data is collected at regular intervals to allow for the continual evaluation of behavior plans and the achievement of individualized data driven goals and objectives Trains and supports behavior therapists on the proper implementation of educational and clinical behavior programs and plans, data collection systems, etc. in the home, community, and center Conducts regular parent training and consultation, per prescribed plan Completes re-assessments and writes reports per insurance guidelines Participates in regular clinical meetings Agrees to complete 28 (twenty-eight) hours of patient care time each work week. Completes documentation of services in a timely manner Qualified Behavior Analysts supervise RBTs Remains current regarding research and evidence-based practices Completes competency assessments for RBTs per HealthPro Pediatrics policy timelines Competently delivers services via telehealth, when necessary Maintains accurate and up to date "CAQH" profile and NPI Collaborates and coordinates care with other evidenced based disciplines, medical providers, educators Completes and maintains all mandatory in house trainings, including telehealth, within the corresponding organization policy timeline Completes accurate billing practices in the electronic practice management system Strictly adheres to Behavior Analyst Certification Board's "The Professional and Ethical Compliance Code for Behavior Analysts". Additional tasks, as assigned by supervisor. Qualifications: Must be licensed as a BCBA.. Must hold LABA licensure At least a Master's degree in ABA, Social Work, Psychology, Counseling, or a related field from an accredited college or university and one year experience working with children on the spectrum.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees. Current benefits being offered include: Competitive Wages. The anticipated starting pay range for the position is $33-35 per hour but is commensurate with skills and related experience, Health/Dental/Vision/Prescription Drug Plan with a company contribution to each, Health Savings Accounts and Flexible Spending Accounts, 401K Retirement Savings Plan: Crown matches 100% of the first 4% of your eligible pay you contribute to the plan. You are always 100% vested in the company matching contributions. Company paid Life and Disability Benefits as well as optional supplemental term life insurance offerings, Paid Parental Leave, 9 Paid Holidays, Paid Vacation accrued at a rate based on length of service and position, Paid Sick Leave, Birthday Pay for Non-Exempt employees, Tuition Reimbursement up to $5,250 per calendar year, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities We will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including California AB-1008 “Ban the Box”, San Francisco's Fair Chance Ordinance and the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance.

Trimac isn't just a transportation company; it's an industry disruptor with a remarkable 80-year legacy of safely delivering products that improve people's lives across North America. Our workplace culture is centered on being safe, respectful, innovative and inclusive. We are committed to maintaining a rewarding work environment that allows employees to experience new opportunities and build their chosen careers. Across the company, we encourage open communication, champion integrity, celebrate individuality and cultivate diverse talents and perspectives. If you're ready for a challenge that will help drive forward an industry leading team, we invite you to begin your journey with us. Job Details: Reporting to the Director, Emergent Sales the objective of this position is to grow revenues through customer acquisition as well as adding services to an existing book of business that will be allocated to the role. This position is accountable for the achievement of budgeted revenues through the development of new and profitable business as well as the maintenance of present assigned contracts. The incumbent also provides input to Head Office and Region Management on the development of pricing policies; sells required rate increases to customers, and reports on the impact of pricing policies after implementation. This role interacts with senior management, internal departments, legal counsel, operating terminals, front-line managers, external agents, industry representatives, competitors, and key contacts with current and potential customers. Location: Los Angeles or San Francisco Who You Are: Demonstrated strength in project and teamwork Knowledge of marketing strategies Positive orientation to problem solving Excellent communication skills both verbal and written Strong mathematical abilities for rate quotations and costing process Advanced working skill of Microsoft Office products, including Excel, Word and Power Point Accountable for developing an environment that adheres to the companies Safety, Health, and Environmental and Security policies Responsibilities: Accountable for the achievement of budgeted revenues through the development of new business opportunities and the expansion of existing client relationships. Identify and evaluate new business opportunities through market research, industry analysis, and relationship building. Collaborate with the sales and marketing teams to develop and execute strategies to drive revenue growth and achieve sales targets. Lead the negotiation and closure of business deals, contracts and partnerships. Stay updated on industry trends, market conditions and competitive activities to identify opportunities for growth and innovation. Prepare and deliver presentations, proposals, and business plans to potential clients and partners. Monitor and analyze key performance metrics to track progress and evaluate the effectiveness of business development efforts. Provide regular updates and reports to senior management on business development activities, pipeline, and results. Travel Required 40-50% of the time. Qualifications: Minimum 5 years of experience in a similar role Bachelor's degree in business administration, marketing or related field. Proven experience in business development, sales or related field. Benefits: We invest in our employee's growth through training and development programs. We offer a comprehensive benefits package such as: Medical, Dental, Vision, Life Insurance, and many more health and wellness benefits Paid vacation, floating holidays, sick time, and company holidays Paid time off for volunteer activities to help give back to our communities Tuition Reimbursement Program to achieve your educational goals Continuous learning and career development Safety Commitments: We make safety a part of every decision We make safety personal We have the courage to intervene

Brinks Texas License #C00550 About Brink's: The Brink's Company (NYSE:BCO) is a leading global provider of cash and valuables management, digital retail solutions, and ATM managed services. Our customers include financial institutions, retailers, government agencies, mints, jewelers, and other commercial operations. Our network of operations in 51 countries serves customers in more than 100 countries. We believe in building partnerships that secure commerce and doing that requires fostering an engaged culture that values people with different backgrounds, ideas, and perspectives. We build a sense of belonging, so all employees feel respected, safe, and valued, and we provide equal opportunity to participate and grow. Job Description The Program Manager, Route Planner is responsible for planning up to 1500 routes a week. The routes are optimized paths for Brink's messengers to deliver cash and/or other valuables to customers around the country based on their specific service contracts. This role will report to the Planning & Scheduling Leader - it is based in Coppell, TX. The Program Manager, Route Planner will be responsible for driving continuous route optimization for Brink's branches of operation around the country. The Program Manager, Route Planner will own end-to-end relationships with branches, customers, and internal leaders across their region. They will work with schedulers and IT teams to develop and continuously improve the route optimization process. What's Next? Thank you for considering applying for a job at Brink's. To be considered for this position, you must complete the entire application process, which includes answering all prescreening questions and providing your eSignature. Upon completion of the application process, you will receive an email confirming that we have received your application. We will review all candidates and notify you of your status should we deem you fit for a job. Thank you again for your interest in a career at Brink's. For more information about future career opportunities, join our talent network, like our Facebook page or Follow us on X. Brink's is an equal opportunity/affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, marital status, protected veteran status, sexual orientation, gender identity, genetic information, or history or any other characteristic protected by law. Brink's is also committed to providing a drug-free workplace. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

$16.00/hour Shift Premium may Apply Immediately hiring! No experience necessary! Unhappy in your ride-hailing or delivery driver gig? We're now seeking responsible people, like you, to join our growing enterprise. Become a member of our Avis Budget Group team where you'll be an appreciated and valued addition! What You'll Do: You will drive our vehicles around our airport lots, depending on the location, from customer check-in, car wash, spaces ready for our customers to rent, maintenance and other lots as directed, all while following our processes and driving our cars safely. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage) On-the-job training Paid time off Medical, Dental and Other Insurance Flexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expenses Retirement benefits (401k) Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars * Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License Flexibility to work all shifts Must be able to constantly enter, exit, sit, get up and down from a seated position and drive a variety of vehicles in all weather conditions Must be 18 years of age and legally authorized to work in the United States This position requires regular, on-site presence and cannot be performed remotely Who We Are: Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate. Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. East BostonMassachusettsUnited States of America

Responsibilities: MV Transportation is seeking an experienced Transit General Manager who will provide support, leadership and direction to assigned operating location to ensure delivery of annual business plans. He/she will control the daily operation of our transportation contract, in compliance with the policies of the contracting agency and in conformance with company procedures. Job Responsibilities: Effectively manage customer relations through both direct contact and outreach programs. Identify, select, train and mentor location staff. Effectively and frequently communicate with location staff and support team members. Oversee vehicle maintenance plan and ensures fleet availability to meet service requirements. Oversee safety and training programs, plans and processes to ensure compliance with company, contract and regulatory requirements. Maintain client contact routinely to meet or exceed expectations. Conduct periodic departmental audits. Daily, weekly and monthly review of key operational metrics. Ensure that all location financial metrics are managed continuously, exceptions are reported and action plans are developed to ensure the location meets it financial, safety and operational expectations. Implement, promote and adhere to company policies and procedures. Interact with bridges committee to effectuate positive changes to policies, procedures and programs. Participate in location(s) labor and employee relations activities. Provide insight and information to support location(s) contract renewals. Create and present location(s) annual budget. Qualifications: Talent Requirements: College degree or equivalent business management experience. Transit Management experience required. Must have a minimum of (5) five years of comprehensive experience in Transit operations management and a combination of (7) seven years of management or supervisory experience in a Fixed Route or Shuttle bus environment with knowledge of routing/scheduling software. Must have labor/union(s) negations/expenses expertise. Must have a full understanding of dispatch, scheduling, driver recruitment, and safety DOT and FTA compliance. MS Office, strong analytical skills, strong written and verbal communication skills and high degree of multi-tasking skills. Additional duties/responsibilities based upon individual contract requirements. Starting Salary Range: $175,000 - $197,000 During the course of employment, employees may receive and have access to confidential information. All employees are expected to respect and maintain the confidentiality of non-public customer and business records and any other information that MV classifies as confidential. MV Transportation is committed to as policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #APPCAST

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: Define and develop RF system architectures for radar and advanced sensing applications. Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. Conduct trade studies and system optimization to balance performance, cost, and schedule. Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. Perform root cause analysis of system performance issues and recommend design changes. Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. Demonstrated experience deriving and validating system-level RF budgets. Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: Experience in phased-array architectures and beamforming. Knowledge of military/aerospace standards and environmental testing. Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees. Current benefits being offered include: Competitive Wages. The anticipated starting pay range for the position is $33 but is commensurate with skills and related experience, Health/Dental/Vision/Prescription Drug Plan with a company contribution to each, Health Savings Accounts and Flexible Spending Accounts, 401K Retirement Savings Plan: Crown matches 100% of the first 4% of your eligible pay you contribute to the plan. You are always 100% vested in the company matching contributions. Company paid Life and Disability Benefits as well as optional supplemental term life insurance offerings, Paid Parental Leave, 9 Paid Holidays, Paid Vacation accrued at a rate based on length of service and position, Paid Sick Leave, Birthday Pay for Non-Exempt employees, Tuition Reimbursement up to $5,250 per calendar year, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities We will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including California AB-1008 “Ban the Box”, San Francisco's Fair Chance Ordinance and the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance.

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: A National Transit Database (NTD) Data Manager is responsible for ensuring the accuracy, integrity, and timely submission of data required for the monthly and annual reports for the Federal Transit Administration (FTA). This includes managing the collection, verification, analysis, and reporting on financial, operating, safety, and asset information according to federal guidelines. Data collection and management Oversee the data collection process from various departments, such as operations, finance, safety, and maintenance. Develop, implement, and maintain procedures for effective and accurate data collection and management. Serve as the primary subject matter expert and agency liaison for NTD reporting. Conduct regular quality control and validation procedures on all data before it is submitted. Reporting and compliance Compile and submit monthly and annual reports, including financial, operating, safety, maintenance, and asset data. Ensure all reporting adheres to federal requirements, including NTD, Americans with Disabilities Act (ADA), and other FTA regulations. Act as the primary contact during the FTA review process and work with agency staff to resolve any issues. Analysis and strategy Analyze agency performance data to identify trends and recommend opportunities for process improvement. Develop performance metrics and dashboards for leadership to track and analyze key indicators. Assist in strategic planning efforts by using NTD data and analysis to inform decision-making. Stay informed of new and changing FTA regulatory and reporting requirements to ensure ongoing compliance. Technology and systems Oversee the use of transit technology systems for data capture, such as GPS tracking, automated fare collection, and maintenance software. Collaborate with IT to maintain and optimize databases and data management tools used for reporting. Support the integration of reporting platforms to streamline the consolidation of data from different departments. Qualifications: Education and experience High School Diploma or equivalent Two (2) years of experience in data management, financial reporting, or a similar applied accounting role. Experience with federal funding and grant reporting requirements is often preferred. Skills and abilities Analytical skills: Strong ability to analyze data, identify issues, and develop appropriate solutions. Technical proficiency: Advanced skills in spreadsheet applications (e.g., Microsoft Excel), database management, and reporting software. Communication: Excellent verbal and written communication skills to effectively liaise with agency staff and federal representatives. Organizational skills: Strong ability to manage complex data, track multiple deadlines, and maintain meticulous records. Leadership: The ability to provide guidance to other staff members involved in the data collection and reporting processes. Starting salary range: $70,354 - $78,171 MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

If you're looking for a new place for your career to thrive and continue your professional growth, I have just the thing for you! Board Certified Behavior Analyst (BCBA) opportunity at our outpatient, pediatric clinic in Plymouth, MA. The collaboration and support of our team along with the kiddos we serve are sure to bring success and fulfillment to your career journey. Bring your passion for pediatrics and ABA to the family of clinicians you've been searching for today! Position Details: Full-Time or Part-Time opportunities available until 6 pm! Compensation of $85,000-$100,000/year between base salary and monthly bonuses! New grads encouraged to apply! Responsibilities: Administers, conducts, evaluates and supervises the implementation of behavioral assessment measures (e.g., VB-MAPP, Vineland) and functional assessment measures Develops individualized, evidence based, culturally sensitive goals and objectives for home, community, and center-based programs Designs behavior support plans based on functional assessment data Ensures appropriate behavior data collection systems are implemented such that quantifiable behavioral data is collected at regular intervals to allow for the continual evaluation of behavior plans and the achievement of individualized data driven goals and objectives Trains and supports behavior therapists on the proper implementation of educational and clinical behavior programs and plans, data collection systems, etc. in the home, community, and center Conducts regular parent training and consultation, per prescribed plan Completes re-assessments and writes reports per insurance guidelines Participates in regular clinical meetings Agrees to complete 28 (twenty-eight) hours of patient care time each work week. Completes documentation of services in a timely manner Qualified Behavior Analysts supervise RBTs Remains current regarding research and evidence-based practices Completes competency assessments for RBTs per HealthPro Pediatrics policy timelines Competently delivers services via telehealth, when necessary Maintains accurate and up to date "CAQH" profile and NPI Collaborates and coordinates care with other evidenced based disciplines, medical providers, educators Completes and maintains all mandatory in house trainings, including telehealth, within the corresponding organization policy timeline Completes accurate billing practices in the electronic practice management system Strictly adheres to Behavior Analyst Certification Board's "The Professional and Ethical Compliance Code for Behavior Analysts". Additional tasks, as assigned by supervisor. Qualifications: Must be licensed as a BCBA. At least a Master's degree in ABA, Social Work, Psychology, Counseling, or a related field from an accredited college or university and one year experience working with children on the spectrum. We consider all qualified candidates for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other characteristic protected by law. Our employment decisions, including those related to hiring, promotion, and compensation, are made based on individual qualifications, performance, and organizational needs.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees. Current benefits being offered include: Competitive Wages. The anticipated starting pay range for the position is $25 to $30 but is commensurate with skills and related experience, Health/Dental/Vision/Prescription Drug Plan with a company contribution to each, Health Savings Accounts and Flexible Spending Accounts, 401K Retirement Savings Plan: Crown matches 100% of the first 4% of your eligible pay you contribute to the plan. You are always 100% vested in the company matching contributions. Company paid Life and Disability Benefits as well as optional supplemental term life insurance offerings, Paid Parental Leave, 9 Paid Holidays, Paid Vacation accrued at a rate based on length of service and position, Paid Sick Leave, Birthday Pay for Non-Exempt employees, Tuition Reimbursement up to $5,250 per calendar year, and much more. EOE Veterans/Disabilities

At Orica, it's the power of our people that leads change and shapes our futures. Every day, all around the world, our people help mobilize vital resources essential to progress. Established in 1874, we have grown to become the world leader in mining and civil blasting with a diverse team of more than 13,000 across the world. From the production and supply of explosives, blasting systems, mining chemicals, and geotechnical monitoring to our cutting-edge digital solutions and comprehensive range of services, we sustainably mobilize the earth's resources. It's an exciting time to join us - we are shaping the future of mining through digital and automated technologies, embracing new ways of thinking, pioneering innovation, and reimagining the way we work. Orica has been recognized as one of the top companies for women to work for in the transportation industry by the Women in Trucking Association (WIT) in 2023 and 2024. Orica does not provide immigration-related sponsorship for this role. Do not apply for this role if you need Orica Immigration Sponsorship (e.g., H1-B, TN, STEM OPT, etc.) now or in the future. Please Note: This posting is intended to collect candidate information for Orica's talent pool and does not represent an immediate job opening. By completing your candidate profile, our recruiters will gain visibility into your background and may contact you for future opportunities that align with your experience and interests. To stay informed about new openings, we also encourage you to create a Job Alert on our career site. This feature allows you to set your preferred job criteria and receive email notifications when matching positions are posted. About the role - CDL Class B Driver (Templeton, MA) We are excited to announce an opportunity at Orica for a CDL Class B Driver within our Orica USA Commercial team. This role will be responsible for driving and operating Orica's bulk trucks (Mobile Manufacturing Units) and installing blasting products for our customers at local construction sites, mines, and quarries as well as being accountable for the upkeep and maintenance of the equipment. This is a hybrid role that consists of approximately 40% driving and 60% physical work related to the installation of blasting products. Responsibilities include loading products, driving a Class B CDL truck, pulling hoses, operating manufacturing units control systems, and climbing on and off the bulk truck in various weather conditions. Additionally, this role will operate equipment to provide blasting products while assisting in delivering a high-quality service of bulk explosives to customers. We prioritize safety and strive to ensure that all operations are conducted in a safe and environmentally responsible manner at all times. Work schedule Monday thru Friday Local driving (1-3 hours) Early morning starts at approx. 3 AM - 5 AM 10-12 hours per day, approx. Overtime may be needed Up to 10% overnight travel may be required What you will be doing This is a blended role that consists of 40% driving and 60% physical work Pre-trip and post-trip inspection of vehicles, including checking and filling fluid levels Ability to safely hook up and unhook trailers Drives emulsion tanker trucks and box trucks Ensure raw materials and dangerous goods are used, handled, and stored according to requirements Ensure minimum damage to the environment through waste minimization and control Report all unusual incidents and accidents immediately Participate in daily toolbox talks and monthly safety meetings What you will bring At least one year of experience driving and/or handling materials preferred Knowledgeable of DOT regulations required Ability to communicate and work in a team environment Good attention to detail and math skills to handle inventory daily Ability to prioritize various projects, ongoing daily tasks, and high-priority situations to maximize efficiency Physical requirements The work environment involves being outside in all types of weather Lifting up to 60 pounds and carrying 50 pounds or more of product or other materials Must be able to load product, pull large hoses, fill holes, and climb on/off the truck Shoveling gravel to fill drilled holes consistently throughout the day Pushing/pulling in working with equipment Other activities include frequent bending and squatting Your qualifications Requires Class B CDL; Class A is a plus Tanker endorsement preferred Hazmat endorsement preferred We will support obtaining endorsements At least one year of experience driving is preferred High School diploma or equivalent What we offer As part of a truly global company, you will have the ability to grow and learn in a diverse, collaborative culture. We foster relationships and learning through connected global and local teams, promote flexible and diverse career paths and support the development of your knowledge and skills. You will be paid a competitive salary, learn from talented individuals across multiple disciplines and be able to thrive in a safe workplace within a collaborative culture. Ignite your career at a place where your distinct potential can find its home. Compensation Hourly Pay Range: $28-34 Signing Bonus $4,500 (Salary to be determined by the applicant's experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data.) Benefits (Full Time Employees) Medical/Prescription Drug - Three (3) plans to choose from Dental - Two (2) plans to choose from Vision - Two (2) plans to choose from Health Savings Account Flexible Spending Accounts Basic Employee Life and Accidental Death & Dismemberment Insurance Voluntary Employee/Dependent Life and Accidental Death & Dismemberment Insurance Company provided Short-Term and Long-Term Disability Company provided Employee Assistance Program Voluntary Hospital Indemnity, Critical Illness & Accident Plans Voluntary Identity Theft Protection Voluntary Legal Plan 401(k) + Company Match Company provided Maternity Leave Company provided Bonding Leave Accrued Paid Time Off Paid Sick & Safe Time Nine (9) Scheduled Holidays + Two (2) Floating Holidays We respect and value all Orica promotes and fosters a culture of inclusion and Equal Opportunity Employment everywhere we operate. We treat our people and applicants with fairness, dignity, and respect, getting the best of everyone's contributions. All qualified applicants will receive consideration for employment without regard to race, religion, sexual orientation, gender perception or identity, nationality, age, military or veteran, marital or disability status. We have been made aware that some individuals have received scam emails which include false and invalid offers of employment from Orica. Please note that Orica will not offer employment to any candidate without first undertaking a formal application and recruitment process. All candidates are required to actively participate in the recruitment process applicable to the specific role and location where the role is based, prior to any offer of employment being made. Please also be advised that Orica will never request payment or require candidates to deposit a check during the recruitment and onboarding processes. Orica is an Equal Opportunity Employer and we are a Drug-free workplace.

We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production. Key Responsibilities: Design, simulate, and develop discreet RF Tx/Rx modules for radar systems. Conduct RF system-level analysis, link budget calculations, and trade-off studies. Select and integrate components such as mixers, amplifiers, oscillators, and filters. Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance. Conduct laboratory testing, tuning, and validation of RF modules against specifications. Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration. Support troubleshooting and root cause analysis for performance anomalies. Maintain comprehensive documentation for design decisions, test results, and compliance requirements. Compensation Range: $99,100 - $128,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field. 5-8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band). Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar). Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro) Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters). Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization. Experience with PCB design for RF and microwave circuits. Familiarity with military or aerospace standards for RF systems is a plus. US Citizenship and ability to obtain/maintain a security clearance. Preferred Skills: Knowledge of phased-array radar architectures. Electronics packaging concepts Familiarity with thermal and mechanical considerations in high-frequency module packaging. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We recruit the best talent and invest in their ongoing development, through training and mentoring. We provide opportunities to work across our national network. dnata catering U.S. is looking for a Flight Coordinator to join our Inwood team supporting the JFK Airport. Key Responsibilities as a Flight Coordinator for dnata catering, your main responsibility is to oversee and manage the inflight catering operations. Your role involves coordinating with airline clients, and ensuring efficient delivery logistics. Your friendly and customer-oriented approach is essential in building strong relationships with clients and meeting their specific needs. Your creative problem-solving skills will help you handle any last-minute changes or special requests seamlessly. Your attention to detail and organizational abilities will be put to use in inventory management and maintaining quality control standards. Overall, as a flight administrator, your friendly demeanor and dedication to exceptional service will contribute to the success and satisfaction of both the airline clients and passengers. What We Offer * Salary Range: $22.00/ hourly * Comprehensive Benefits Package: Full-time employees are eligible for 401(k) and healthcare benefits including Medical, Dental & Vision * Complimentary Daily Meals: Enjoy breakfast, lunch, and dinner during your shift Why Join dnata Catering? * Purpose-Driven Work: Be part of a mission to deliver on the promises our customers make, guided by our values of safety, respect, teamwork, and innovation. * Career Growth & Recognition: Accelerate your career with structured development programs, mentorship, and our Najm recognition platform that celebrates performance and service excellence. * Inclusive Culture: Thrive in a collaborative, people-first environment where your voice matters, your contributions are valued, and your future is supported Accepting applications until: 12.15.2025 You Will ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: * An effective communicator, capable of determining how best to reach different audiences and executing communications based on that understanding. * Flexible in your approach and demeanor to align with the shifting demands of evolving circumstances. * Capable of building strong customer relationships and delivering customer-centric solutions. * A good decision-maker, with proven success at making timely decisions that keep the organization moving forward. * Willing to act and eager to embrace new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. You Will: * Provide excellent customer service daily. * Comply with all HACCP/GMP and dnata catering sanitation and proper food handling policies and procedures. * Check all meals to ensure accuracy of menu specifications and meal counts. * Constantly on the move in an out of the office and on an aircraft. * You must be able to lift up to 30 lbs., and stand for long periods of time, constantly bends, and squats. * Be exposed to frequent low temperatures 35/40 degree while checking flight and may be exposed to extreme weather conditions when catering the flight outdoors. * Comply with Ramp Safety policies and procedures, safety vests must be worn while out on the field. * Other duties as assigned. External Relationships * Coordinating with airline clients and ensuring efficient delivery logistics. Communication and Process * Excellent communication skills, including conflict management and resolution, with a track record in customer service. NONESSENTIAL FUNCTIONS: * Other duties as assigned. You Have EDUCATION: High school diploma with six plus years of progressive customer service experience QUALIFICATIONS: * Proficient in Microsoft Office applications, including Excel. * Proficiency in Microsoft Office. * Must have driver's license. * The ability to meet requirements necessary to obtain a Port Authority, Port ID (per TSA regulations and more specifically, 49 CFR §1542.209) * Must have excellent attention to detail. * Must be able to multi-task. * Must be able to read and write in English. * Schedule flexibility is a must. * Ability to lift and push heavy objects, racks, etc. * Ability to work in a fast-paced environment. * Work safely to prevent accidents to self and coworkers. Intellectual/Social demands: * While performing the essential functions of this job, the employee is continuously asked to multi-task under time limits. Position requires constant attention to precise details and accuracy of specified standards including following simple to complex (more than 3 steps) instructions, and concentration which frequently extends beyond 30 minutes at a time. This position also requires constant attendance and punctuality - Is consistently at work and on time. Follows instructions, responds to management direction; Takes responsibility for own actions; Completes tasks on time or notifies appropriate person with an alternate plan. Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. Physical demands: * While performing the duties of this job, the employee is regularly required to stand, walk; reach with hands and arms and stoop, kneel, or crouch. The employee must regularly lift and /or move up to 30 pounds. Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Use equipment and materials properly. Work environment: While performing the duties of this job, the employee is regularly exposed to extreme cold/heat (weather), heights and loud noise (earplugs must be worn while on the Ramp dnata's Competencies Required to be Successful in the Job: There are two aspects to working as effectively as we can: our people and our results. Our eight competencies are designed to help you focus on these aspects: Delivering: Does what they say they will. And they balance the needs of our customers' needs with our business's needs. Drive Always gets the job done. And still put the needs of our business first. Open to opportunity: Adapts when plans change. Is open to new ideas. Makes suggestions that will help shape our culture. Business thinking: Understand our business. Uses this understanding in their day-to-day work and plans for the future. Collaborate: Look for solutions that work for themselves, their team, and the whole organization. Engaging others: Acts in a way that gets others on board - and when things don't go to plan, they deal with conflict in the right way. Provide direction: Share plans with others. Tracks how each project is progressing. Gives constructive feedback during, and after, each project. Developing talent: Self-aware. Always learning. Always developing. And always helping others to develop, too. Demonstrated Values to be Successful in the Position: Employees at dnata are expected to live our Values of Safety and Security, performance-driven, Service Excellence, Delighting Customers, Imagination, and respect. To demonstrate these Values, we expect to observe the following from everyone: * We put safety and security first in all our actions. * We will set challenging goals and meet them. * We deliver to a consistently high quality. * We take ownership and responsibility of a situation until it is resolved. * We are not afraid of failure and learn through our mistakes. * We respect each other regardless of background. Diversity Matters We believe that diversity and inclusion are fundamental to creating a strong workplace and community. At dnata, we're proud that our workforce is as diverse as the customers we serve. And we're committed to nurturing your talent with mentoring, volunteer, and professional development opportunities. We welcome everyone. Our employee resource groups are one of the many ways we champion diversity and inclusion at dnata.