DP Electric jobs in Tempe, AZ

The Apprentice Electrician IV continues developing advanced skills in the electrical trade, demonstrating a high level of competency in installations, troubleshooting, and conduit work. This role involves working independently or under limited supervision to execute complex electrical tasks in commercial and industrial settings. Essential Functions * Identifies and organizes all materials used in the electrical trade. * Plans and executes underground installations with precision, adhering to provided specifications. * Performs all aspects of rough-in electrical installations with minimal supervision, ensuring proper use of tools and equipment. * Demonstrates advanced skills in hand bending EMT, with proficiency in using mechanical and table benders for larger EMT and rigid conduit. * Installs panel interiors and pulls feeders within one-line systems with little to no supervision. * Assists in the setting and assembly of SES (Service Entrance Section) and transformers as part of electrical system installations. * Contributes to branch power system installations, including disconnects, homerun installations, terminations, branch circuit pulling, and fuse applications. * Provides comprehensive support to journeyman electricians by assisting with complex tasks as needed. * Interprets complex blueprints, symbols, layouts, and scales with precision, managing small scopes of work. * Maintains a clean and safe work environment while adhering to all safety protocols and regulations. * Adheres to company tool policies, demonstrating initiative in investing in and maintaining required trade tools. Minimum Qualifications * High school diploma or GED. * Three (3) years of prior experience in commercial or industrial electrical installation. * Valid driver's license and reliable transportation. Preferred Qualifications * Enrollment in or willingness to join a certified electrical apprenticeship program. * Strong proficiency in conduit bending, including mechanical and hydraulic bending techniques. * Experience assisting in SES assembly, transformer setup, and complex system terminations. * Familiarity with NEC chapters 1-4 and demonstrated ability to navigate and apply electrical codes. * Strong problem-solving skills, initiative, and leadership capabilities. OR an equivalent combination of education, certification, and experience that results in the successful performance of the job. Additional education may substitute for required experience on a one-for-one year basis or vice versa. Knowledge, Skills, and Abilities * Knowledge of electrical trade materials, NEC regulations, and complex electrical installations. * Knowledge of advanced conduit bending techniques, underground systems, and troubleshooting methods. * Skill in executing rough-in installations, panel wiring, and transformer setup. * Skill in interpreting and managing work scopes from blueprints and technical drawings. * Ability to work independently or under the supervision of a journeyman electrician with efficiency and accuracy. * Ability to handle physically demanding tasks, including lifting, working at heights, and operating in confined spaces. * Ability to take ownership of projects, problem-solve, and lead small tasks effectively. Work Environment Medium work environment. Indoor and outdoor work with exposure to uncomfortable and hazardous physical, ergonomic, and/or emotional environment. Work requires lifting up to 50 pounds and wearing protective equipment; exposure to environmental conditions, weather, climbing, crawling, lying, and working under pressure.

The Electrical Engineer is responsible for all electronic control, radio communication, monitoring systems, and components including computer-related hardware and software. Benefits * Medical * Dental * Vision * Employer Paid & Voluntary Life Insurance * 401(k) Employer Match plus Annual Profit-Sharing Contributions * Paid Vacation, Sick Time & Holidays * Employer Paid Disability Plan * Employee Assistance Program * CalPortland is proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That's why we give you a wide range of benefits to choose from. • Medical, Dental, Vision o low-cost premiums even for family coverage • Company-paid life/AD&D insurance • Company-paid short-term disability • Paid sick/vacation/holiday • 401k/Company Funded Pension Program (program is dependent upon location and job type) • Employee Assistance Program (EAP) • Additional voluntary benefits Compensation $95,000 to $105,000 Depending on Experience Responsibilities Ability to assist and support the Plant Automation Engineer with the operation, maintenance, and programming of all plant instrument/analyzer systems including logic, analog and graphics, and all other technology that may be acquired Assist in the maintenance of instrument/analyzer/electrical systems, server-based high-level analyzer systems, and data historians such as OSI Pi, FLS ECS/QCX; assist CIS with the maintenance of corporate IT network Work with the plant's team to develop new control systems applications for projects Work with the energy team to identify improvements and participate in energy audits Assist with all aspects of capital projects including sizing of conductors and protective devices; load calculations for new and existing power systems in preparation for additions, changes, and capital projects interconnecting to the plant electrical system Identify worn and defective components as well as appropriate replacements; provide field inspections and supervision for electrical work on projects Support plant by diagnosing and correcting electrical problems Provide technical and safety training to Plant Electricians Complete design and drawing updates for replacement components Ability to apply corporate standards to designs and solutions suggested/implemented; use new technologies at the plant such as smart MCCs, including design, training of electricians, and updating documentation/diagnostic systems Replace or upgrade worn and depreciated components; design, change, and modify instrument/analyzer systems Create and submit capital proposals Education Bachelor of Science degree in Engineering Requirements/Qualifications Willing and able to work flexible hours as needed to maintain plant instrument/analyzer systems Must be a self-starter and be able to work independently Ability to maintain skills as necessary to keep pace with the ever-changing and improving technology for plant instrument/analyzer systems Strong communications and management skills - will work with, direct, assist and/or follow vendor services for troubleshooting and maintenance of all instrument/analyzer systems Troubleshooting skills and critical thinking are a must Ability to read and edit process flow drawings; the ability to read and create logic decision charts Ability to travel - required to travel to company facilities and other meeting locations on occasion Must be able to work cooperatively with plant and corporate personnel Preferred: Prior experience in computer automated control and instrumentation and/or cement production processes Knowledge of National Electrical Code (NEC) Understanding of instrument/analyzer system fundamentals Power distribution systems, relays, medium volt switchgear, instrumentation, PLC's, VFD's, etc. Conditions of Employment Successful candidate must submit to a post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA-regulated ongoing drug and alcohol testing. #LI-PW1

About the Role: The Field Mechanic with MYR Group you'll travel to project sites across the designated service area, supporting our field teams. You'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. This position requires significant travel in the state of Texas, (including overnight) to project locations, supporting teams to ensure successful operation of the equipment. At times, the Mechanic will be required to respond to emergencies outside regular work hours and work overtime including weekends and holidays. To support these travel requirements, a company vehicle, fuel card, and lodging will be provided. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. We are consistently recognized as one of the top five specialty electrical construction firms by Engineering News Record. Essential Functions This is considered an advance-level skilled or career level position Perform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations Perform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedules Frequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional manner May provide oversight for less experienced mechanics Perform routine and preventive maintenance, inspections, and repairs Identify mechanical problems either visually or with computer diagnostic equipment Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate Conduct safety inspections of equipment and prepare safety documentation Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements Other duties as assigned Regular and predictable attendance Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Must have three to five years of experience in general mobile heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules Physical Requirements/Working Conditions Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - $300 quarterly, $1,200 annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Tool/boot allowance ($250 per quarter). Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Workplace: #LI-Hybrid

Essential Duties and Responsibilities: Stay updated on product developments, company policies, and industry best practices to provide informed support to customers. Serve as a contact for customer inquiries, issues, and order management from receipt through delivery, using various communication channels such as phone, email, fax, and online systems. Work to increase customer retention, identify cross-sell opportunities, and ensure overall customer satisfaction. Guide customers through the onboarding process, providing clarify and confidence with Satellite's products and processes. Process customer orders, create and modify purchase orders as needed, and ensure all logistics meet customer expectations. Track and monitor shipments, provide timely updates, and handle related communications to ensure smooth delivery. Maintain and update new and current customer records, including entering product quotes, assisting with webstore logins and updating information in the CRM system. Respond promptly to customer phone calls and emails, offering detailed product information and addressing questions about all product lines. Provide Sales operations support by assisting with product knowledge, lead times, product quotes, freight quotes, and resolving additional customer concerns. Process customer returns and credit memos efficiently, ensuring customer satisfaction throughout the resolution process. Log customer complaints and refer unresolved issues to the appropriate departments for further investigation and follow-up. Identify new revenue opportunities within existing customer accounts by leveraging communication, programs, and relationship-building activities. Cultivate strong business relationships with customers to support their ongoing needs and encourage growth within the existing client base. Identify inefficiencies in sales or order workflows and suggest improvements to enhance productivity and accuracy. Work with Sales to provide outstanding service and help meet deadlines. Assist with organizing and supporting sales initiatives such as managing follow-up on quotes and customer forecasts. Conduct market surveys by phone, analyze responses, and provide actionable conclusions or recommendations to support business growth. Supervisory Responsibilities: This position has no supervisory responsibilities. Education and Experience Requirements: Bachelor's degree and/or 2-5 years' experience in an internal customer service or inside sales role. Bilingual preferred but not required. Proficiency working in a Windows Office environment is required (Outlook, Excel, Word). Demonstrated interpersonal and communication skills are required. Experience in dealing with freight and logistics a plus. Demonstrated ability to think critically and efficiently, with a proven track record of providing effective recommendations or solutions to customer issues. Experience with database entry and maintenance is preferred but not required. Required Skills: A strong team player and leadership skills Excellent verbal and communication skills. Detail oriented. Customer/Client Focus. Ethical Conduct Time Management Project Management Multitasking Ability Personal Effectiveness/Credibility Excellent problem solving and organization skills Strong Interpersonal communications skills Demonstrated ability to work with a team. Flexibility Physical/Mental Demands: Position requires a high degree of concentration to manage frequent interruptions while meeting strict deadlines. This position requires the ability to perform duties using both typical office equipment such as computers, cell phones, and printers as well as the ability to communicate and perform tasks in a manufacturing/workshop environment. Must be able to perform physical and mental tasks associated within a manufacturing environment. Some travel required. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

60% - Sales: The position partners with the Branch Manager and other Sales Representatives to increase volume of product sales. In addition, the assisting in upkeep of current customers, the Sales Representative will incorporate sales techniques to grow and maintain our customer base. Travel is primarily local during business day, although some out-of-area and overnight travel may be expected. 40% - Sales Data Upkeep: This position captures the accurate data, tracks sales, and monitors technology to ensure that all possible prospect needs are met. Essential Duties & Responsibilities: Sales: Qualifies incoming leads from sources Develops and increases sales revenue to meet assigned targets. Coordinates the rental, sale, and lease of new and existing products and services. Maintains a high level of contact with key accounts to insure long-term business relationships. Attends trade shows Keeps informed of new products, services, and other general information of interest to customers. Utilizes trade data lists, marketing lists, trade associations and visiting customer job sites to acquire new customers. Follows up with customers on a timely basis to provide the highest level of customer service. Meeting or exceeding designated sales targets for assigned territory. Troubleshoots quality control issues Sales data Upkeep: Utilize available technology to assist in the promotion and sales. Converts quotes into orders Maintains existing customer data and sales reports. Designs new reports as needed. Management of Satellite's internet stores Creates and modifies floorplans in company software Works with marketing to create sales sheets, sale flyers, and other marketing materials. Develops and conducts marketing programs for assigned territory Education and Experience Requirements: Bachelor's degree in Business Administration, or equivalent experience required Direct sales experience preferred Development of a prioritization system to ensure work is completed quickly and efficiently. Proficient in Navision, Salesforce.com, Microsoft Office. Required Competencies/Skills: Ability to work effectively on a team to enhance the growth of the company. Excellent organizational skills to coordinate all aspects of sales. Strong interpersonal skills in working with both customers, vendors, and sub-contractors. Proven ability to work accurately. Excellent problem solving and detail-oriented skills. Previous successful sales experience in a high transaction, B2B, repeat customer environment. Strong written and verbal communication Experience using the telephone as a prospecting and sales tool. Good time management and organizational skills Proficiency in MS Office Suite, CRM programs, and other computer software. Physical/Mental Demands: Position requires a high degree of concentration to manage frequent interruptions while meeting strict deadlines. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger handle or feel; and reach with hands and arms. The employee is also required to lift up to 35 pounds worth of marketing material for tradeshows and displays.

About the Role: The Field Mechanic with MYR Group you'll travel to project sites across the designated service area, supporting our field teams. You'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. This position requires significant travel in the state of Texas, (including overnight) to project locations, supporting teams to ensure successful operation of the equipment. At times, the Mechanic will be required to respond to emergencies outside regular work hours and work overtime including weekends and holidays. To support these travel requirements, a company vehicle, fuel card, and lodging will be provided. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. We are consistently recognized as one of the top five specialty electrical construction firms by Engineering News Record. Essential Functions This is considered an advance-level skilled or career level position Perform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations Perform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedules Frequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional manner May provide oversight for less experienced mechanics Perform routine and preventive maintenance, inspections, and repairs Identify mechanical problems either visually or with computer diagnostic equipment Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate Conduct safety inspections of equipment and prepare safety documentation Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements Other duties as assigned Regular and predictable attendance Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Must have three to five years of experience in general mobile heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules Physical Requirements/Working Conditions Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - $300 quarterly, $1,200 annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Tool/boot allowance ($250 per quarter). Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Workplace: #LI-Hybrid

Who are we? Satellite Industries is the world's largest supplier of products to the portable sanitation industry, which includes portable restrooms, handwash units, consumables, deodorizers, vacuum trucks, vacuum technology, unit haulers, restroom, shower, and specialty trailers. Position Summary: The Production Technician 2: PVA works with materials to create a finished product for commercial or industrial use. Please note that this position has a typical schedule of Monday - Thursday, 7am to 6pm. Essential Duties and Responsibilities: Follow checklist for production start-up including: preparing machine for production, ensuring line is ready for production, turning on production equipment including but not limited to: compressor, vacuum, Mattpak, etc. Input work orders into appropriate printers to ensure accurate product marking. Affix product label rolls onto labeling machine. Initiate and monitor the operation of the automated bagging machine. Generate pallet tickets and record pallet information clearly and accurately. Conduct routine quality inspections to ensure product meets Satellite standards and identify and report any quality defects promptly. Count materials and report inventory discrepancies. Understanding work orders and bill of materials and ability to review and sign off on materials as required. Count and stack boxed product(s) in a neat and thorough manner. Move, stack, wrap, and replace pallets on robot. Bag packets into bags utilizing appropriate equipment/machinery. Perform accurate hand-counting of packets. Complete housekeeping duties regularly, following standard operating procedures and operational needs including but not limited to: sweeping, squeegeeing floors, cleaning process equipment, etc. Report waste and scrap materials in an accurate and timely manner. Verify that all materials match the specifications outlined in work orders. Labeling containers to meet customer specifications and federal regulations. Supervisory Responsibilities: No formal supervisory role. Education and Experience Requirements: This position prefers a high school diploma/GED. 3+ years of chemical production experience or the equivalent of training and experience. 3+ years manufacturing equipment operation experience. Required Skills: Proficient understanding of running manufacturing equipment. Intermediate manufacturing experience required. Ability to read, comprehend, and follow written instructions, chemical labels, safety regulations, and company policies, etc. Ability to maintain composure and effectiveness in a high-pressure and fast-paced environment. Technical Capacity. Ethical Conduct. Strong attention to detail. Ability to multi-task and be self-directed while remaining a team player. Excellent communication and teamwork skills. Independent Decision-Making skills. Physical/Mental Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk, read, count, and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, pushing, pulling, climbing ladders, and lifting throughout the day. The employee must frequently lift and/or move items over 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee must be able to use the personal protective equipment (PPE) that is determined to be necessary for this position including, but not limited to: respirators with a minimum requirement of N-95, safety-grade gloves, safety-grade eye protection, steel or composite toe shoes, etc. WORK ENVIRONMENT: While performing the duties of this job, the employee will be required to regularly work in a manufacturing environment working with multiple agents and reactants including, but not limited to: fumes, chemicals, airborne particles, moving mechanical parts etc. The noise level is typically moderate but hearing protection may be required. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

Kelly is seeking a Senior Scheduling Specialist to join with our prestigious client in Port Lavaca, Texas 77979 & Houston TX 77077. Title: Senior Scheduling Specialist This role is a contract role: 12+ months Onsite work at Port Lavaca, Texas 77979 & Houston TX 77077. Pay range: $55-$66/hr Job description The Senior Construction Scheduling Specialist acts as a technical resource for Scheduling within the Global Project Methodology (GPM) work process and supports establishment of the overall construction schedule baseline and reporting to monitor and control the construction activities within established tolerances of the baseline supporting efficient project execution. In this role you coordinate data inputs from the various construction contractors and internal disciplines to ensure accurate forecasts and reporting of schedule and engage the project steering team to understand causes of the deviation and the need to establish actions to mitigate, where deviations from established tolerances occur. Requires expanded conceptual and practical knowledge in own job discipline and broadens capabilities. Responsibilities / Duties • Recommendations on cycle time reduction opportunities and techniques • Develops and maintains comprehensive integrated master project schedules including Detail Design, Procurement, Construction and Start-up/Commissioning Project Stages. • Utilizes project cost estimates to resource load project schedules and gain alignment with estimated scope of work and the project schedule. • Recommendations on cycle time reduction opportunities and techniques • Performs staffing density checks or staffing limitation checks to validate schedule durations and ensures resource-level supports the project strategy. • Leads project teams in forecasting schedule challenges and offers analyses and solutions to complete the project on schedule. • Performs critical path analysis to determine problem areas in regard to project schedule and resource overloads and offers alternative courses of action to the project team. • Evaluates project deviations to assess schedule impact for proper decision making and recovery plans. • Applies established schedule management practices to ascertain critical schedule issues and recommend corrective actions. Experience • Practical experience as a scheduler working for a large main construction contractor in coordinating multiple subcontractors (e.g. in coordination of civil, structural steel, piping, insulation and scaffolding etc • Assist in developing and maintaining comprehensive integrated master project schedules including Front-end Loading, Detail Design, Procurement, Construction and Start-up/Commissioning Project Stages. • Maintains construction schedule during the project life cycle monitoring progress and incorporating modifications where changes in the original scope occur or delays are encountered. • Leads project teams in forecasting schedule challenges and offers analyses and solutions to complete the project on schedule. • Evaluates project deviations to assess schedule impact for proper decision making and recovery plans. • Applies established schedule management practices to ascertain critical schedule issues and recommend corrective actions. • Assist in quantity tracking and installation rates • Performs quantity surveys to validate construction progress Required qualifications • A minimum of a bachelor's degree in any discipline or 10 years of experience in project controls, engineering, manufacturing, or related experience. A few points to highlight: - Experience can be between 7 to 15 years. - 40-hour work week as 5x8, with overtime based on project demand. - The individual must be on-site every day. Construction Scheduler with construction exposure/ P6 experience and worked in the site. Please apply to this role if you are a good fit for the role or share references

The Director of Operations-Houston is responsible for leading production and operational support teams to produce quality products in a safe manner, on time, economically, and at desired levels of customer care. This role supports safety initiatives throughout the plant's operations and provides continuous improvement direction and support on the production floor. The individual will be instrumental in establishing the new Houston Operations facility; once operational, the Director will lead, manage, and implement operational initiatives at the Houston plant to support Industrial and Municipal Business Unit strategies and goals, including capital investment plans. As a key member of DeZURIK's operations team, the Director of Operations-Houston will report directly to the Industrial Business Unit leader and will serve as a strategic partner in running the business. Major elements of the Director of Operations-Houston's responsibilities include to: Influence the design of the new Houston facility, assisting with plant layout, existing site and product moves, and related readiness activities. Provide leadership to the production and operational support teams, including Manufacturing, Planning and Materials Management, Shipping, Quality, Maintenance, Manufacturing Engineering, and Operational Admin personnel, to achieve plant safety, quality, on-time delivery, and productivity goals. Support all Health and Safety initiatives related to the facility by providing leadership for all policies and procedures, while continually improving safety records by addressing both physical safety issues and employee safety engagement. Develop and maintain strong employee relations within all levels of the company, while also motivating, coaching, and developing a diverse, high-performing leadership team. Lead the implementation of new manufacturing initiatives, including allocating strategic resources and applying continuous improvement principles for improved efficiencies. Establish annual operating budgets, inventory control targets, and performance goals for department leaders, including ownership of the annual capital planning process for the facility. Support and advance supply chain initiatives to strengthen critical vendor relationships and improve lead-time performance. Collaborate with Sales, Service, Engineering, and Supply Chain teams to meet customer expectations. Candidate Profile The Director of Operations-Houston will have a proven track record of success leading manufacturing and supply chain activities. The fully qualified candidate will have a bachelor's degree in business administration, engineering, or a recognized equivalency. This individual should have a minimum of 10 years of hands-on experience in operations leadership. Experience in a custom flow control product manufacturing environment is a plus, as is experience with industrial machining and assembly operations. We are seeking a leader known for engaging the workforce, facilitating improved customer responsiveness, and enabling sustainable growth. The successful candidate must have excellent business acumen and an operations aptitude with strong communication skills and the ability to think strategically. He or she will be an operations executive with an outstanding track record and reputation for driving improvement, business judgment, leadership skills, and integrity. This individual must have the ability to establish immediate credibility at all levels, inside and outside the organization. Location The Director of Operations-Houston will be based in Houston, Texas, at the planned new Operations facility, which will expand DeZURIK's existing Texas production footprint and team. Compensation & Benefits We offer a competitive base salary in the $175,000 to $225,000 range, based on experience and qualifications, along with an annual bonus and the opportunity to participate in long-term incentives, including a stock appreciation rights (SARs) program. Beyond pay, our market-leading benefits are designed to support your wellbeing. These include medical, dental, vision, and life insurance, as well as short- and long-term disability coverage. We also provide a health savings account with company match, a retirement plan with employer contributions through Vanguard, and access to the Granite Assistance Fund for support when it's needed most. We value time for rest and personal growth, offering generous paid time off, including volunteer time off and paid holidays.

A high number of candidates may make applications for this position, so make sure to send your CV and application through as soon as possible. Progressive Roofing - Roofing Estimator - Dallas, TX We are growing our team andlooking to find our next great estimator! Seeking a professional individual willing to jump in and work with our team and clients to help provide high qualityestimates. We work with a variety of different roofing systems and on commercial properties. As one of the nation's leading commercial roofing companies we see a wide range of projects throughout the year. For this position we need someone whois hands on and open to learning about commercial roofing or if you have experience in this space, open to continuing to perfect your skillset. Qualifications, Knowledge, and Skills: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily as outlined above. The requirements listed below are representative of the knowledge, skill, and/or ability required. Fluent knowledge of a variety of computer software applications such as Microsoft Outlook, Word, Excel, etc. Knowledge of office administrative procedures and knowledge of use and operation of standard office equipment. Ability to write highly effective reports, proposals, and business correspondence. Ability to effectively present information and respond to questions from employees, managers, and customers. Ability to define problems, collect data, establish facts, and draw valid conclusions. Willingness to travel and work with diverse client/customer base. Attend job walks and prepare take-off off by measuring, noting all variables of the roof site. This may require multiple visits to the actual project site. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requirements: Must be a team player and coachable Solid communication skills All candidates considered for this position must be fluent in Microsoft Office suite software. Key Responsibilities: Solid knowledge to analyze blueprints, specification interpretations, proposals, and other documentation to prepare material quotes, fabrication labor and construction labor requirement quotes, project pricing, and bid abstracts. Prepare itemized lists and summaries. Compute cost factors and prepare estimates used for management purposes such as planning, organizing, scheduling work, preparing bids, selecting vendors and/or subcontractors, and determining cost effectiveness. Consult with subcontractors, vendors, or other individuals to discuss and formulate estimates and resolve issues. Work with Project Managers, Purchasing, and Management as needed in the preparation and final evaluation of bids. Organize and manage a centralized cost estimating database and a formal process to support cost estimating to ensure historical data is utilized. Identify cost trends to assist management in cost reduction and processes of improvement. Complete understanding of manufacturer product warranties. Estimate prices on change orders on existing contracts. Attend pre-construction and bid/pre-qualification meetings. Ability to work from blueprints and drawing specifications. Maintain a positive rapport with property and facilities managers, general contractors, and manufacturers representatives. We Offer: Competitive wages Use of company vehicle and cell phone Great health insurance options Medical, dental and vision 401K Company paid short-term disability. xevrcyc Company-paid life Insurance Earned PTO, and more! Companyis an Equal Opportunity Employer PM23 PIe92dd 1

About Us Every moment of every day, people around the world rely on the energy they access through infrastructure built by Quanta. Comprising the largest skilled-labor force in North America, our employees are highly skilled and innovative, continually working to connect people and power. We're building the infrastructure that supports the energy transition, and there are more opportunities than ever to be part of our team. Join us and build your career building a brighter future. Imagine what you could do here. We encourage, inspire, and support our people to seize opportunities in our corporate office and with hundreds of our operating companies worldwide that provide solutions for the utility, renewable energy, electric power, industrial, and communications industries. Quanta actively promotes and maintains a culture of belonging where all employees can be themselves, live their values, and find opportunities to succeed. When you join our team, you join a dynamic organization in which career development is encouraged, excellence is rewarded, and diversity is prized. Come find out how our people power modern life. Position Overview The Senior Cloud & Systems Administrator will be responsible for managing, maintaining, and optimizing our hybrid IT Infrastructure. This includes overseeing on-premises and cloud- based systems, ensuring high availability, implementing enterprise-level security policies, and driving improvements in backup, disaster recovery, and system performance. The ideal candidate has extensive hands-on experience with Microsoft Azure, Microsoft 365 administration (including Exchange, SharePoint, Intune, Sentinel, and others), VMware, Windows Server, SQL Server, Microsoft Fabric, SaaS integrations, backup and recovery solutions, and Entra ID. What You'll Do: Manage, monitor, and maintain Windows Servers, virtualized environments (VMware), and Azure resources. Oversee Microsoft 365 administration, including Exchange, SharePoint, Intune, Sentinel, and related services. Implement and maintain enterprise security measures, including Entra ID configurations, Conditional Access policies, multi-factor authentication (MFA), and other identity security controls. Administer Microsoft SQL Server environments, including performance tuning, backup strategies, query troubleshooting, and optimization. Provide day-to-day administration and configuration of Microsoft Fabric for data platform and analytics needs. Develop, maintain, and test backup and disaster recovery strategies to ensure data integrity and business continuity. Support SaaS applications and integrations, ensuring secure connectivity, data flow, and user access alignment with company standards. Proactively monitor systems for performance and reliability issues, applying corrective actions as needed. Assist in planning and executing infrastructure upgrades, migrations, and integrations. Collaborate with cross-functional teams to support business applications and IT initiatives. Maintain documentation for configurations, procedures, and troubleshooting guides. Provide tier-3 support for escalated issues and mentor junior IT team members. What You'll Bring: 5+ years of experience in system administration in a mid-to-large enterprise environment. Strong expertise with Microsoft Azure and Microsoft365 administration (Exchange, SharePoint, Intune, Sentinel). Solid experience with SQL Server administration, including performance tuning and troubleshooting. Familiarity with Microsoft Fabric administration and integration with Microsoft data platforms. Hands-on experience with VMware vSphere (installation, configuration, performance tuning). Experience with backup and disaster recovery solutions (e.g., Veeam). Experience working with SaaS-based platforms and integrations across cloud and on-premise environments. In-depth understanding of identity management and security policies (Entra ID, Conditional Access, MFA, RBAC). Familiarity with networking fundamentals (DNS, DHCP, VPNs, firewalls). Excellent troubleshooting and problem-solving skills. Strong documentation and communication abilities. Certifications (preferred but not required): Microsoft Certified: Azure Administrator Associate, MCSA/MCSE, VCP (VMware Certified Professional), Microsoft Certified: Data Analyst Associate (for Fabric/Power BI environments). Why Join Us Competitive salary and benefits package. Opportunities for professional growth and certification support. Collaborative and forward-thinking IT team. Chance to make a meaningful impact in a growing enterprise. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against based on race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, or any other basis protected by applicable federal, state, or local law. Quanta Services is an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or to request reasonable accommodation in the job application, interview, or hiring process, please contact Quanta Services' Human Resources department.

Schmidt Electric is a leading provider of superior installation, service, and support in the Austin marketplace. Since its inception in 1984, the company has grown from a small family business to a major player in the Central Texas area, with locations in Austin and Houston. Schmidt Electric is known for its highly motivated professionals dedicated to delivering responsive, innovative, and cost-effective electrical solutions. The company prides itself on its outstanding electrical construction and contracting services, supported by a 20-vehicle service fleet available 24/7 to meet client needs. Role Description This is a full-time, on-site role for a Senior VDC/BIM Technician located in Austin, TX. The Senior VDC/BIM Technician will be responsible for creating and managing Building Information Models (BIM) for various projects. Day-to-day tasks will include creating construction drawings, coordinating with Mechanical, Electrical, and Plumbing (MEP) elements, and ensuring the structural integrity of building services. The technician will work closely with project teams to deliver accurate and efficient models and drawings aligned with the project's goals and timelines. Qualifications Proficiency in Revit and AutoCAD, specifically Electrical design and modeling Experience with Electrical coordination Ability to create detailed Construction Drawings Knowledge of Building Services Familiarity with Electrical Engineering principles Strong organizational and communication skills Ability to work collaboratively within a team Degree in Engineering, Architecture, or a related field is preferred Previous experience in the construction industry is a plus

The ideal candidate will be responsible for planning, coordinating, and implementing projects within the decided-upon budget, timeline, and scope. They will also effectively monitor and present project updates to relevant stakeholders, clients, or project team members. Responsibilities Set project timeline Monitor project deliverables Update relevant stakeholders or team members on the project progress Coach and support project team members with tasks you assign them Qualifications Bachelor's Degree or equivalent experience Strong business acumen in project planning and management Strong verbal, written, and organizational skills

About Us: Steves & Sons, a 159-year-old family-owned door manufacturer, seeks a skilled Purchasing Manager to oversee the procurement of materials and services for our company. We're looking for a strategic thinker with a proven background in purchasing and supply chain management. Job Summary: We're seeking a Purchasing Manager to develop and implement purchasing strategies, manage supplier relationships, and ensure the timely delivery of materials. This role requires a strong technical background, analytical skills, and the ability to work collaboratively with our teams. Key Responsibilities: - Develop and implement purchasing strategies and processes - Manage and negotiate contracts with suppliers - Conduct market research to identify new suppliers and materials - Analyze data to identify trends and opportunities for cost savings - Collaborate with cross-functional teams to ensure alignment and effective purchasing strategies - Oversee the purchasing process, ensuring accuracy and compliance with company policies - Monitor supplier performance and ensure on-time delivery of materials - Develop and maintain purchasing metrics and reports Leadership Qualities: - Strong analytical and problem-solving skills - Proven ability to negotiate and manage contracts - Excellent communication and collaboration skills - Data-driven approach to decision-making - Ability to prioritize tasks and manage multiple projects Qualifications/Requirements: - Bachelor's degree in business administration, Supply Chain Management, or related field - Proven experience as a Purchasing Manager or similar role - Solid understanding of purchasing principles and practices - Experience with purchasing software and systems (e.g., ERP, procurement platforms) - Excellent communication and interpersonal skills - Outstanding organizational and leadership abilities What We Offer: - Opportunity to lead purchasing efforts for a dynamic company - Collaborative and customer-centric work environment - Professional growth and development opportunities - Competitive compensation and benefits package Compensation/Benefits: - Competitive Annual Salary - Year-End Bonuses - Medical, Dental, Vision Insurance - 401(k) with employer match - PTO How to Apply: If you're a skilled Purchasing Manager with a passion for strategic sourcing and supplier management, please submit your resume.

BOWA Construction - Superintendent We are a General Contractor and Construction Management firm, established on the core principles of family, honesty, discipline, and quality. Our team consists of individuals with extensive general contracting, construction management, and design-build experience. We build projects with passion and are driven by the anticipation of the impact they will have in our communities-for years to come. ROLE OVERVIEW: As Superintendent you will be accountable for monitoring the progress of projects, running day-to-day field operations, and directing and coordinating designated project activities. This includes subcontractor/vendor coordination activities and quality control. You are responsible for ensuring safety, schedule delivery, quality of work performed, and adherence to budget of the project. ROLE AND RESPONSIBILITIES: • Lead the on-site team from construction start through project close. • Oversee and make decisions related to the performance of work including scheduling, delivery, logistics, quality control, and trade employee staffing levels. • Oversee work among assigned trades to promote coordinated project operations. Resolve local area problems regarding procedures, precedence, design clarifications, adequate labor and equipment schedule, and all other appropriate matters. • Verify field conditions by conducting daily jobsite walkthroughs in addition to daily safe work plans and toolbox talks. • Monitor the detailed master schedule, create a two-week look ahead, and track critical dates of all activities affecting the project completion. • Proactively identify and help remedy design deficiencies, schedule concerns, and other project-specific issues. • Communicate and interpret contract scope to the entire site management team. • Conduct preconstruction meetings with all subcontractors prior to beginning each phase of work. • Create and maintain a project production schedule. • Build and nurture relationships with clients/owners, architects, developers, and subcontractors. • Other duties and responsibilities as required. SKILLS, KNOWLEDGE, QUALIFICATIONS, & EXPERIENCE: • Bachelor's degree in construction management or related fields preferred and/or equivalent training. • Supervisory experience as a construction Superintendent or Assistant Superintendent and a clear understanding of the business side of construction. • Comprehensive understanding of all divisions of work, methods, materials, scheduling, and cost control. Basic competency with construction technologies. • Ability to read, understand, and interpret blueprints, contract documents, scopes of work, and project schedule. • Ability to travel to jobsites as needed. • Demonstrated leadership and interpersonal skills. OSHA 30 Hour certification and First Aid/CPR certification are a plus. BENEFITS: • Medical, Dental, Vision Insurance - 70% Employer contribution & Employee HSA contribution* • Performance Based Bonuses - % of base salary • Parental Leave • Basic Life and AD&D Insurance • Short Term & Long Term Disability Insurance • 401(k) with company match • Paid Vacation, Sick Time, & Holidays • Employee Assistance Program (provides resources for a variety of personal and family services) Please note: This position is not eligible for work visa sponsorship.

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Kilgore Industries, LP provides Mechanical, Electrical, and Plumbing (MEP) services throughout Texas. Recognized as a leading provider in terms of size and capabilities, Kilgore consistently delivers high-quality service solutions. The company's customers include notable commercial, industrial, medical, and educational institutions, as well as prominent hospitality, multifamily, and government entities. Role Description This is a full-time role based in Texas, for an MEP Service Sales Consultant. The Service Sales Consultant will identify and develop new customers focusing on Facility Services of HVAC, Electrical, and Plumbing. Responsibilities include working with clients to understand their operational needs, preparing tailored service proposals, ensuring customer satisfaction, and maintaining positive client relationships to foster recurring business. The consultant will collaborate closely with internal teams to develop effective facility solutions and deliver exceptional customer service. Qualifications Proven skills in Sales within the MEP or related industries Strong Customer Satisfaction, Customer Service, and relationship-building skills Excellent Communication skills, both verbal and written, to effectively engage with clients and internal teams Ability to work collaboratively in a team-oriented environment and meet project goals Experience in the MEP or Facility Services Industries is highly desirable

The QAQC Specialist works closely with the QAQC Manager to ensure all electrical work is installed and completed in compliance with applicable plans, specifications, codes, company standards, and industry regulations. This role assists in enforcing quality procedures, improving efficiency, and supporting field leadership development. Essential Functions * Assists in developing, implementing, and managing processes to ensure electrical installations meet all required standards. * Collaborates with the QAQC Manager to communicate quality parameters and expectations to the QA team and field staff. * Supports compliance with NEC and local municipality regulations under the direction of the QAQC Manager. * Works with the QAQC Manager to identify and implement measures that reduce labor costs and enhance efficiency. Upholds company standards for safety, quality, and efficiency by enforcing policies, procedures, and protocols. * Assists in the continued development and mentorship of field leadership through coaching and delegation. * Supports team motivation through daily interaction and leading by example. * Conducts inspections and audits to ensure adherence to quality standards and identify areas for improvement. * Documents and reports non-compliance issues, recommending corrective actions as needed. * Coordinates with project managers and site supervisors to ensure seamless integration of quality control measures. * Utilizes software platforms such as Procore, Bluebeam, and BIM360 to track and manage quality data. * Participates in training programs to reinforce quality and safety best practices. * Performs other duties as assigned. Minimum Qualifications * High school diploma or GED. * Experience in construction management, or related field preferred; equivalent work experience may be considered. * Minimum Seven (7) years of experience, (10) preferred including two (2) years in supervisory role. * Proficiency in Microsoft Office Suite and quality management software. Preferred Qualifications * Completion of a state-recognized electrical apprenticeship. * Experience using advanced project management and quality control software such as BIM360, Procore, CxAlloy. * Background in electrical field leadership or quality control process. OR an equivalent combination of education, certification, and experience that results in the successful performance of the job. Additional education may substitute for required experience on one-for-one year basis or vice versa. Knowledge, Skills, and Abilities * Knowledge of electrical installation standards, codes, and quality control processes. * Knowledge of NEC regulations and local municipality compliance requirements. * Knowledge of software tools such as Microsoft Office Suite, Procore, Bluebeam, BIM360, CxAlloy. * Skill in analyzing quality-related issues and implementing corrective measures. * Skill in verbal and written communication for effective collaboration with field teams and management. * Skill in time management, organization, and problem-solving to ensure quality standards are met on schedule. * Ability to enforce company policies and industry standards while maintaining positive relationships with field staff. * Ability to adapt to changing job site conditions and quality control challenges. * Ability to mentor and support field leadership in quality control best practices. * Ability to stand for extended periods and lift over 50 lbs as required for inspections and audits. Work Environment * Medium work environment. Indoor and outdoor work with exposure to uncomfortable and hazardous physical, ergonomic, and/or emotional environment. Work requires lifting up to 50 pounds and wearing protective equipment; exposure to environmental conditions, weather, climbing, crawling, lying, and working under pressure.

The Safety Coordinator ensures that all operations, procedures, and practices adhere to the highest safety standards, fostering a secure and healthy work environment. This role involves conducting inspections, developing safety programs, training employees, and ensuring compliance with all relevant safety regulations. Essential Functions * Conducts regular safety inspections and audits to identify potential hazards and areas for improvement. * Collaborates with various departments to develop and implement comprehensive safety programs and initiatives. * Provides guidance and training to employees on safety protocols and procedures. * Investigates and analyzes incidents, accidents, and near misses, identifying root causes and recommending preventive measures. * Monitors and ensures compliance with federal, state, and local safety regulations and standards. * Maintains accurate records of safety-related activities, incidents, and training sessions. * Assists in the development and communication of emergency response plans and procedures. * Participates in safety meetings and committees, contributing insights and recommendations. * Stays updated with industry best practices and evolving safety trends. * Promotes a culture of safety through ongoing engagement with employees and leadership. * Recommends corrective actions and safety improvements to reduce workplace risks. * Supports the enforcement of personal protective equipment (PPE) requirements and safety protocols. * Performs other duties as assigned. Minimum Qualifications * High school diploma or GED. * Seven (7) years of experience in a related field with supervisory experience preferred. * Proven experience in safety-related roles, preferably in a supervisory or management capacity. * Proficiency in Microsoft Office Suite Preferred Qualifications * Relevant safety certifications (e.g., OHST, STS-C, OSHA 500). * Experience in developing and implementing safety programs in a construction or industrial setting. * Familiarity with safety management software and reporting tools. OR an equivalent combination of education, certification, and experience that results in the successful performance of the job. Additional education may substitute for required experience on one-for-one year basis or vice versa. Knowledge, Skills, and Abilities * Knowledge of workplace safety regulations, including OSHA, federal, state, and local compliance requirements. * Knowledge of safety program development, hazard identification, and incident investigation techniques. * Knowledge of emergency response planning and best practices. * Skill in conducting safety audits, inspections, and risk assessments. * Skill in training employees and effectively communicating safety procedures. * Skill in analyzing safety incidents, identifying root causes, and implementing corrective actions. * Ability to work collaboratively across departments to implement safety initiatives. * Ability to adapt to changing safety regulations and workplace conditions. * Ability to organize and maintain safety records, documentation, and compliance reports. * Ability to enforce safety policies while maintaining a positive and productive work environment. Work Environment Medium work environment. Indoor and outdoor work with exposure to uncomfortable and hazardous physical, ergonomic, and/or emotional environment. Work requires lifting up to 50 pounds and wearing protective equipment; exposure to environmental conditions, weather, climbing, crawling, lying, and working under pressure.