Top Drilling Fluids Engineer Skills

Below we've compiled a list of the most important skills for a Drilling Fluids Engineer. We ranked the top skills based on the percentage of Drilling Fluids Engineer resumes they appeared on. For example, 8.2% of Drilling Fluids Engineer resumes contained Mud Pumps as a skill. Let's find out what skills a Drilling Fluids Engineer actually needs in order to be successful in the workplace.

The six most common skills found on Drilling Fluids Engineer resumes in 2020. Read below to see the full list.

1. Mud Pumps

high Demand
Here's how Mud Pumps is used in Drilling Fluids Engineer jobs:
  • Maintain and repair electric motors and mud pumps.

Show More

2. Fluid Operations

high Demand
Here's how Fluid Operations is used in Drilling Fluids Engineer jobs:
  • Supervised drilling fluid operations for NOV Research & Development Technology Center.

Show More

3. Safety Meetings

high Demand
Here's how Safety Meetings is used in Drilling Fluids Engineer jobs:
  • Attend safety meetings and provided feedback to help keep the rig safe.
  • Prepared daily mud reports and attended daily safety meetings.
  • Take active part in Pre-tour and safety meetings, Fire and Emergency Drills.
  • Participate in pre- job safety meetings.
  • Conduct safety meetings & perform environmental audits.
  • Facilitated daily safety meetings and ensured operations to be in 100% compliance with state regulations and HSE standards.

Show More

4. Fluids Engineer

high Demand
Here's how Fluids Engineer is used in Drilling Fluids Engineer jobs:
  • Served as drilling fluids engineer for territory covering Southern and Western Colorado.
  • Supervised training and evaluating new drilling fluids engineers in order for the engineer to successfully take control and lead a job.
  • Created drilling fluids engineer company to provide on-site supervision of drilling fluids program for oil companies in Gulf of Mexico.
  • Self-employed consultant fluids engineer working in the GOM, land, inland waters & offshore (shelf/deep water).
  • Trained younger engineers on the daily job requirements to become a successful fluids engineer for their future careers.
  • Provided 24 hour service drilling fluids engineering in DeSoto, Red River and Sabine Parish Louisiana.
  • Mentor new fluids engineers prior and post drilling fluids school and evaluate their assigned workplace competencies.
  • Hand-picked to train new employees before and after Drilling Fluids Engineering course in Houston, TX.
  • Provided drive-by and 24 hour service drilling fluids engineering in East Texas and Northwest Louisiana.
  • Help Develop and implement Knowledge checklist for new Drilling Fluids Engineers.
  • Experienced Fluids Engineer seeking a career in the water filtration industry.
  • Lead Drilling Fluids Engineer in the Lubbock region Oversee 4-6 rigs in the Permian Basin, keeping cost below projected budget.
  • Provided drilling fluids engineering services on land, inland waters and offshore projects in South Louisiana.
  • Managed daily inventory.Accomplishments Certified in Drilling fluids engineering.Skills Used Great communication skills.
  • Worked as senior drilling fluids engineer on Daewoo project drilling long radius wells 61 degree Inclination With 9000 ft. tangent sections.
  • Self-employed consultant mud engineer working in the Eagle Ford Shale Drilling and completion fluids engineer in Ecuatorial Guinea and GOM - Deepwater

Show More

5. Fluid Systems

high Demand
Here's how Fluid Systems is used in Drilling Fluids Engineer jobs:
  • Performed extensive laboratory analysis and on-site testing of various drilling fluid systems used at offshore drilling platforms.
  • Conduct physical and chemical tests on fluid systems to reinforce proper processes and remedy instabilities and issues in operations.
  • Provide formulation and troubleshooting of invert oil based and saturated salt water fluid systems in long lateral environments.
  • Served as mud engineer in South Louisiana experienced with water-based, oil-based, and synthetic-based fluid systems.
  • Perform chemical analysis of drilling fluids, suggest proper treatments for drilling fluid systems.
  • Used complex water and synthetic-base drilling and completion fluid systems.
  • Build and maintain a variety of drilling fluid systems.
  • Designed and engineered various fluid systems on several Wells.
  • Managed both water-based and oil-based fluid systems Improved fluid systems by optimizing quality and limiting influence of contaminants.
  • Engineer complete mud systems, selling of mud products, cost control, driving 300 miles/day, balanced fluid systems.
  • Experienced in engineering water-based, oil-based, weighted, unweighted, traditional brine and KCL air/foam drilling fluid systems.
  • Maintained drilling fluid systems to operator specifications while drilling wells in the Eagleford and Olmos formations.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Solids Control Equipment

high Demand
Here's how Solids Control Equipment is used in Drilling Fluids Engineer jobs:
  • Utilized all solids control equipment available.
  • Operated Solids Control equipment to maintain the desired percent by volume solids to water ratio and low sand contents.
  • Maintain all solids control equipment for proper operations and also construct drilling fluids on well site.
  • Analyzed all solids control equipment to make sure it s at peak performance.
  • Coordinate logistics for shaker screens and other solids control equipment.
  • Oversee the maintenance of solids control equipment and handling.
  • Monitor and service solids control equipment.
  • Coordinated all solids control equipment i.e.
  • Performed products inventory, ensured a safe and clean mud products stock area, solids control equipments and analysis laboratory.
  • Managed all solids control equipment ie; mud cleaners, centrifuges, and shakers.

Show More

7. Logistics

high Demand
Here's how Logistics is used in Drilling Fluids Engineer jobs:
  • Handled logistics through organization and coordinated chemical and fluid deliveries.
  • Coordinated logistics for fluid and chemical deliveries.
  • Applied coordinated logistics to conserve proper amounts of chemical products for daily drilling fluid treatments.
  • Managed storage and logistics of fluids as well as chemical fluid additives.
  • Maintain inventory and cost of products, control logistics of same.
  • Plan and coordinate logistics to and from well site.
  • Schedule logistics for deliveries and pick-ups of products.
  • Assist in managing Company Inventory and Logistics Planning.
  • Handle shipping & receiving & coordinate logistics.
  • Coordinated logistics between rig site, stock-point, and workboats ensuring materials were delivered within specified time period.
  • Managed all logistics for inventory via excel spread sheets and other computer outlets.
  • Well site fluids & logistics management Drilling fluids properties monitoring & maintenance.

Show More

8. Polymer

high Demand
Here's how Polymer is used in Drilling Fluids Engineer jobs:
  • Created and introduced new polymer-mud formulation, fitting Barnett-drilling challenges.
  • Worked on Horizontal wells with Devon using Polymer, Oil based systems.
  • Spud Mud, KCL/Polymer & Performax.
  • Total loss of circulation during top hole section with Gel/KCL/Polymer mud Shale Cavings experienced drilling through the intermediate section.
  • Work on horizontal wells 4500m 91 deviation Polymer Mud Kcl Glycole.
  • Salt Sutured Mud High Density (2.20 sg) Polymer KCL, Polymer Salt/KCl, Polymer Glycol System, PH.PA System.
  • Test and mix chemicals used in completion drilling such as Xanthan Biopolymer, various friction reducers, and viscous chemicals.
  • Mud ups include starch systems, Polymer Mud, Vi-Chem Mud, and Mud Masters "sugar mud".
  • Specialized in Polymer "TOP HOLE System" Worked exclusively for Gulfport Energy

Show More

9. Oil Base

high Demand
Here's how Oil Base is used in Drilling Fluids Engineer jobs:
  • Contract return policies for unused oil based mud additives to ensure losses will not be incurred for unused chemical purchases.
  • Conducted daily lab analysis of water and oil based drilling fluids and relayed all results to the appropriate parties.
  • Managed and oversaw wells with Water-Based Mud, Oil Based mud and Brine (CaCl).
  • Utilize Oil Base/Lignite fluids offshore in the Gulf of Mexico 10-150 miles out.
  • Worked with water and oil based fluids 24 hour service for:
  • Drilled the Deviation wells with Brine Water then Oil Base.
  • Observed cement and freshwater displacements in oil based drilling fluids
  • OIL Base uMd Emulsified Mud INVERMUL, VERSSADRILL and CARBOTEC.ENVIROMUL.
  • Worked with oil based fluids Southwestern Energy Corporation North Central AR.
  • Worked with water and oil based fluid for: Apache Corp - West Texas Pioneer Natural Resources Noble Energy

Show More

10. OBM

high Demand
Here's how OBM is used in Drilling Fluids Engineer jobs:
  • Worked the EXXON-Mobil project in CO. for two years with OBM and polymer mud.
  • Inventory OBM on location as well as asses solids control efficiency through the testing of retention and full spec testing.
  • Work with Polymer Mud and OBM Enviromul Completion with Cacl2&CaBr2 Brine weight 1.70sg.
  • Used have used fresh water, brine water, and OBM muds as needed.
  • Managed Pressure Drilling experience in SOBM Utica applications.
  • Drilled withFreshwater, OBM and Brine.
  • Experience in running OBM/invert mud, prehydrated fresh gel, salt clay/attapulgite clay.
  • Maintained OBM fluid systems on Horizontal Haynesville wells.Operators: EOG Resources, Petrohawk and Encana.

Show More

11. Completion Fluids

high Demand
Here's how Completion Fluids is used in Drilling Fluids Engineer jobs:
  • Maintained and analyzed completion fluids during completion process.
  • Coordinated trucking, work boats, and crew boats associated with fluid: cement jobs, completion fluids and displacements.
  • Recovered much money for clients by re-cycling spent mud and used completion fluids.
  • Involved in engineering of drilling fluids and completion fluids used for drilling.
  • Maintain customer accounts on a field level Run all drilling fluids and completion fluids for operator
  • Supervised the cleaning crews that clean the M/V's that transport Mud and completion fluids to offshore rigs.

Show More

12. Halliburton

high Demand
Here's how Halliburton is used in Drilling Fluids Engineer jobs:
  • Enforce and ensure consistent compliance with OSHA, EPA, and Halliburton EHS regulations and protocols.
  • Provided on-site connection between Halliburton and customer for all fluid related issues.
  • Graduate of Halliburton's industry recognized Baroid Mud School
  • Field Service Representative II - Drilling Fluids At Halliburton Location: Basra, Iraq Company Industry: Oil/Gas Job Role: Engineering
  • Completed a two week class for Halliburton's ADT service covering drill string integrity and hydraulics optimization.
  • Provide technical support to clients and other Halliburton team members at the well site.

Show More

13. Water Base

high Demand
Here's how Water Base is used in Drilling Fluids Engineer jobs:
  • Engineered water base, oil base and drill-in fluids/production fluids during the drilling of oil and gas wells.
  • Experienced with such mud systems as Water base/Polymer Mud, Brine Systems, and Oil Base Mud.
  • Gained experience working with oil based and water based drilling fluids both onshore and offshore.
  • Used oil based and water based mud systems on horizontal oil & gas wells.
  • Engineered and maintained Oil base, Water base and Synthetic Mud systems.
  • Managed oil based, water based, and polymer fluid systems.
  • Experience with Water based, Oil base, and synthetic solutions.
  • Experience in treating and troubleshooting Water Base Drilling Fluid systems.
  • Experience in running Oil Base Mud and Water Base Mud.
  • Engineered water based, oil based and polymer systems.
  • Worked with water based salt polymer.
  • Water Base, Oil Base, and Brine fluid systems.
  • Utilized relaxed Synthetic Base Mud systems,Diesel Invert Emulsion systems, Brine systems, and Water based systems.
  • Drilled with water based,oil based, synthetic based, cut brine, brine, polymer fluids.
  • Work with Oil Based Mud and Bentonite spud mud Water Based Mud and completion fluids.
  • Water base and oil base mud are some of the drilling fluids use.
  • TYPE OF Mud Worked on Water Base Mud Bentonitique Spud Mud.
  • Maintain drilling fluids Water Base Muds and Oil Base Muds each type has different types of fluids.
  • Engineered water based muds in high loss areas of Piceance Creek Colorado.

Show More

14. WBM

high Demand
Here's how WBM is used in Drilling Fluids Engineer jobs:
  • Trained many young fluid engineers right out of mud school in both WBM and SBM usage.
  • Provided Mud Engineering consulting services for WBM/OBM drilling fluid closed loop drilling fluid systems.
  • General responsibilities in the field for analyzing WBM and OBM to drill horizontal wells.
  • Worked with OBM and WBM on horizontal wells in the Permian Basin.
  • Manage 5,000 bbl WBM storage to maximize the use among l3 active rigs
  • Maintained and monitored mud properties for OBM and WBM systems.
  • Worked mainly with WBM in the Permian Basin.
  • Worked with WBM, Potassium Based WBM, WBM Polymer, and OBM.
  • Work with OBM, WBM, and Brine.
  • Experience with WBM and OBM.
  • Experience working as a Lab Tech/Chemist working in reclamations, completion fluids, and WBM/OBM/SBM drilling fluids.
  • Maintain specific properties of the drilling fluid Order chemicals from the warehouse to location Evolution HPWBM Certified

Show More

15. Baroid

average Demand
Here's how Baroid is used in Drilling Fluids Engineer jobs:
  • Acquired extensive knowledge of Baroid product service line chemicals and applications to safely maximize drilling efficiency.
  • Facilitated bilingual interaction between instructors and Colombian peers at the Baroid s Drilling Fluid Technology training offered in Houston, Texas.
  • Customize sweep programs utilizing Baroid's Drilling Fluids Graphics software to ensure a clean hole and to enhance ROP.
  • Completed Baroid Drilling Fluids course, WellCap Well Control, and Block 1 Development Training.
  • Trained at Baroid's Drilling Fluid Technology Center in Houston, Texas.
  • Based out of NL Baroid's Odessa, Texas field office.
  • Completed Baroid's Drilling Fluids Technology & Environmental Compliance Course.
  • Provide well site service to customers of Baroid.
  • Completed Baroid Drilling Fluid Comprehensive Mud School.
  • Assisted Baroid office in well planning and business delivery activities, reviewed well recaps for accuracy and capture of lessons learned.
  • Run routine and specialized testing to provide technical guidance of Baroid's customized engineered fluids to maximize wellbore value.

Show More

16. Customer Service

average Demand
Here's how Customer Service is used in Drilling Fluids Engineer jobs:
  • Provided effective customer service and conduct all business activities in accordance with policies.
  • Support operators in providing effectual customer service.
  • Promote customer service with the drilling supervisor by recommending treatments needed to maintain or improve properties of the drilling fluid.
  • Provide effective customer service by sending professional reports and updates regarding the progress of the well.
  • Assist sales representatives in making sales calls and aid operators in providing effective customer service.
  • Provide valuable customer service to company man and crew to include entertainment.
  • Key player in integral team for maximum customer service and value.
  • Diagnose and solve drilling fluid and customer service related problems.
  • Provided effective customer service.Laboratory Supervisor.

Show More

17. Environmental Compliance

average Demand
Here's how Environmental Compliance is used in Drilling Fluids Engineer jobs:
  • Performed environmental compliance duties as well on at least 3 wells.
  • Completed Baker Hughes Environmental Compliance Course.
  • Offered management of drilling fluids, solidscontrol, environmental compliance, and waste disposal.
  • Worked on the Deepwater Drillship Discoverer Inspiration for Chevron for the past four years as an Environmental Compliance Specialist.
  • Adhered to all applicable regulations, policies and procedures for health, safety and environmental compliance.

Show More

18. KCL

average Demand
Here's how KCL is used in Drilling Fluids Engineer jobs:
  • Drilled several deep water, high pressure wells using synthetic based fluid and KCL drilling fluid.
  • Mix fluids on location using a rolling tank to fill frack tanks with desired weight of brines or kcl for fracking.
  • Executed KCL Brine filtration and displacement.
  • Mud Types: Lignosulfonate, KCL, Salt Saturated/ Brine.
  • Mud Type: KCl Polymer- PHPA.
  • Handled Bentonite Spud Mud and KCL Polymer Glycol PHPA Mud System well in Bangladesh.

Show More

19. Billing Purposes

average Demand
Here's how Billing Purposes is used in Drilling Fluids Engineer jobs:
  • Track material usage and maintain record for inventory and billing purposes.

Show More

20. Fluid Programs

average Demand
Here's how Fluid Programs is used in Drilling Fluids Engineer jobs:
  • Work with technical professionals in developing new drilling fluid programs based upon collected metrics.
  • Implemented drilling fluid programs and diagnosed drilling fluid related problems.
  • Implement prescribed drilling fluid programs.
  • Position Held: Drilling Fluids Engineer Responsible for drilling fluid programs and management of chemical logistics.

Show More

21. Product Inventory

average Demand
Here's how Product Inventory is used in Drilling Fluids Engineer jobs:
  • Manage product inventory to ensure availability (Warehouse).
  • Order and manage product inventory to ensure availability.
  • Maintained product inventory on location.
  • Provided logistical support for all product inventory ordered from the stock point warehouses to be received at the well site.
  • Tracked product inventory and scheduled all deliveries and pick-ups.
  • Managed whole fluid and product inventory on location.
  • Coordinate product inventory to rig site.
  • Maintain on site product inventory.
  • Maintain an on-site product inventory.
  • Manage product inventory to ensure availability - Maintain communication between crew members, contractor, and drilling company
  • Managed product inventory,logistics, and coordinated transportation between warehouse and remote locations.

Show More

22. H2S

average Demand
Here's how H2S is used in Drilling Fluids Engineer jobs:
  • Experience in Lost Circulation, H2S and stuck pipe.
  • Have had OSHA 10/30, Basic first aid, H2S, HAZ-MAT along with many others.
  • Participate weekly kick drill, H2S drill and Fire drill with rig crews.
  • Waste management, H2S content fluid treatment.
  • Up to 56% H2S.
  • Maintained a safe work environment with all rig personnel and conduct daily safety briefings in a H2S work area.

Show More

23. Company Representative

average Demand
Here's how Company Representative is used in Drilling Fluids Engineer jobs:
  • Advised company representatives on how to maintain operational and remedial fluid properties for borehole stability.
  • Liaised with company representatives to ensure timely order of drilling chemicals.
  • Worked with company representative to monitor fluids and drilling operations.
  • Worked closely with the company representative, driller, and derrick hand to ensure completion operations were executed properly and safely.
  • Worked closely with the company representative, driller, and derrick hand to ensure proper utilization of drilling fluids during drilling.
  • Meet and consult with company representative for best mud properties for most efficient rate of penetration at any given depth.
  • Respond to variation in mud condition in a timely and professional manner in consultation with the company representative.
  • Company Representative for chemical sales and technical service in the Oil and Gas Industry.
  • Preformed the following tasks: Mud Company representative on the rig site.

Show More

24. Chemical Analysis

average Demand
Here's how Chemical Analysis is used in Drilling Fluids Engineer jobs:
  • Run a full chemical analysis including density and viscosity and oil content in fluid.
  • Perform chemical analysis of drilling fluids.

Show More

25. RAN

average Demand
Here's how RAN is used in Drilling Fluids Engineer jobs:
  • Received 30 OSHA approved training and certifications from Halliburton University, ranging from safety to professional business conduct.
  • Managed market expansion in Southwest Louisiana for Francis Drilling Fluids against solid competitors while strengthening regional reputation.
  • Verified trucking transportation of inventory and equipment.
  • Performed heat transfer, CFD, and secondary flow analyses for numerous Rolls-Royce commercial and military engine applications.
  • Performed Quality Assurance and Quality Control for MD America Oil and Gas Company from Fort Worth, TX.
  • Supervised use of drilling fluid cleaners, centrifuges and fluid transfers on rig and from boat to rig.
  • Maintained drilling fluid for wells with depths ranging from 15,000-22,000 ft and laterals ranging from 5,000-7,000 ft.
  • Ensured hole integrity, and minimize losses through trouble zone formations or during fluid transfers.
  • Warm up time of engine was predicted by using FLOWMASTER transient vehicle cooling system model.
  • Warm up time can be predicted using transient thermal analysis of a cooling system.
  • Compiled data for clients, arranged information in quarterly reports and in presentations.
  • Participated on the design and implementation of remote controlled tree branch cutting machine.
  • Managed all logistics for transportation related to drilling fluids on the rig.
  • Ensured quality assurance program for mud additives was followed at all times.
  • Company transferred to Kuwait to work under contract for Kuwait Oil Company.
  • Supervised all vessel-to-vessel fluid transfer, watching for spills or leaks.
  • Arrange Training for TFM personnel based on a competency gap analysis.
  • Transport operations liaison for drilling fluids and MI products.
  • Formulated and ran project for Devon - Barnett Shale.
  • Designed rear wheel drive transmission shafting.

Show More

26. Mud Program

average Demand
Here's how Mud Program is used in Drilling Fluids Engineer jobs:
  • Tested, troubleshooted, and treated fluids during intervals of the well to maintain specifications detailed by company mud program.
  • Created mud programs for new wells based on personal knowledge and data from previous wells in the same areas.
  • Performed mud tests to ensure mud properties are within the desired specifications as per well mud program.
  • Provide reports and documentation concerning the mud program and unique problems that crop up with each well.
  • Established and implemented the baseline Mud Programs for other rigs and advises for cost savings.
  • Work with Drilling Engineers and Drilling Fluids Vendors to optimize mud programs for wells.
  • Treated drilling fluid to ensure mud properties coincided with mud program.
  • Created Mud Programs and Technical papers.

Show More

27. Chemical Inventory

average Demand
Here's how Chemical Inventory is used in Drilling Fluids Engineer jobs:
  • Managed handling and storage of chemical inventory and completed daily reports underlining rig activity and billing invoices.
  • Managed chemical inventory and notified warehouse staff when additional orders were needed.
  • Performed frequent chemical inventory counts and managed projected supply chain orders.
  • Maintained proper chemical inventory levels necessary for job completion.
  • Develop budgeting system in order to maintain chemical inventory at well sites.
  • Maintain total chemical inventory for plant.

Show More

28. Onsite Services

average Demand
Here's how Onsite Services is used in Drilling Fluids Engineer jobs:
  • Provide onsite services associated with measuring and testing the drilling fluids and supervising pumping operations.
  • Provided onsite services associated with measuring and testing the drilling fluids and supervising the mixing and pumping operations.

Show More

29. Chemical Additions

average Demand
Here's how Chemical Additions is used in Drilling Fluids Engineer jobs:
  • Conducted analyses of drilling fluid composition, ensuring correct properties for application and made appropriate chemical additions.
  • Supervised rig personnel performing chemical additions and incorporating drilling fluids parameters into a technical report.
  • Supervised rig personnel performing chemical additions and recorded drilling fluid parameters.
  • Test fluid concentrations daily and put in work orders for chemical additions to central and local coolant and lubrication systems.
  • Perform daily mud checks, complete report along with daily mud chemical additions.
  • Supervised and coordinated all chemical additions to the drilling fluid.
  • Supervised mixing of chemical additions to drilling Excellent work history with fluid, supervised loading and unloading of trucks several references.

Show More

30. Phpa

low Demand
Here's how Phpa is used in Drilling Fluids Engineer jobs:
  • Run PERFORMAX, GLYCOL, PHPA mud systems.
  • Worked with Bentonite /CMC and PHPA muds.

Show More

31. Chevron

low Demand
Here's how Chevron is used in Drilling Fluids Engineer jobs:
  • Provide drilling fluids testing and service for Chevron throughout the SJVBU and various Drilling/Workover Rigs.
  • Provided drilling fluid services and advise in deep water for Chevron on the drill ship Glomar Explorer.
  • Support and contribute to Chevron safety environment.
  • Completed Chevron s Accelerated Development Program consisting of leadership, technical, & field training.
  • Lead the planning process for our team and managed the Chevron complex well process.
  • Peer Review member on several projects within the Chevron organization.

Show More

32. API

low Demand
Here's how API is used in Drilling Fluids Engineer jobs:
  • Maintained and calibrated instruments used in testing drilling fluids following API standardized testing procedures.
  • Performed laboratory tests following API and company Standard Operating Procedures.
  • Follow API and company guidelines, standards and procedures in the preparation, testing and reporting of oilfield cement systems.
  • Test drilling fluids using API standards and provide proper chemical additives.
  • Build, test and monitor drilling fluids according to API standards.
  • Assist in the development of capital and expense budgets.
  • Perform all drilling fluids test per API standards.
  • Graduated top of API certified drilling fluids program.
  • Implemented API standard testing for drilling fluids.
  • Centrifuge Capillary Suction time test.
  • Preform Titrations to mud systems to check alkalinity, chlorides and other various properties using API Standards.

Show More

33. Fluid Samples

low Demand
Here's how Fluid Samples is used in Drilling Fluids Engineer jobs:
  • Collect fluid samples from oil or gas bearing formations and analyze sample to determine potential productivity of formation.
  • Gather drilling fluid samples and perform tests to determine trends and identify contaminants.
  • Gather and test drilling fluid samples to evaluate quality standards.
  • Collect fluid samples and run tests using mobile test kit.
  • Gather drilling fluid samples and identify contaminants via titration.
  • Test fluid samples.Gauging and strapping Frac Tanks on location.Operate chemical mixing plant, inspect valves and pressure while pumping.

Show More

34. Chemical Properties

low Demand
Here's how Chemical Properties is used in Drilling Fluids Engineer jobs:
  • Provide onsite services measuring and testing physical/chemical properties of drilling fluids and supervising the mixing and pumping operations.
  • Managed employees* On-call 24/7* Responsible for chemical properties of drilling fluid, etc.
  • Maintained physical and chemical properties of drilling fluids from well spud to completion.
  • Maintain proper chemical properties of drilling fluid.

Show More

35. Technical Analysis

low Demand
Here's how Technical Analysis is used in Drilling Fluids Engineer jobs:
  • Performed technical analysis and made specific recommendations for controlling fluid properties.
  • Supervised fluid mixing and pumping, including technical analysis and specific recommendation for controlling fluid properties.
  • Maintain fluid properties to customers specifications Make recommendations while overseeing inventory of products Perform technical analysis based on specific well procedures

Show More

36. Inventory Management

low Demand
Here's how Inventory Management is used in Drilling Fluids Engineer jobs:
  • Provide logistical support and inventory management for product.
  • Handle inventory management and product procurement.
  • Maintain accurate and timely maintence of drilling fluids records, emails, training and inventory management.

Show More

37. Fluid Parameters

low Demand
Here's how Fluid Parameters is used in Drilling Fluids Engineer jobs:
  • Monitor mud weight, viscosity, oil/water ratios to enhance and promote drilling efficiency and penetration rates, drilling fluid parameters.
  • Maintain drilling fluid parameters in program specifications on a daily basis.
  • Maintain customer relations Prepare orders and mixing plans Evaluate and solve problems Optimize drilling fluid parameters

Show More

38. HSE

low Demand
Here's how HSE is used in Drilling Fluids Engineer jobs:
  • Conducted HSE discussions and meetings at rig site, highlighting issues and procedures, avoiding losses and injuries.
  • Monitored 24 hour operations on drilling rigs to ensure project success, while ensuring HSE standards were upheld.
  • Conduct all activities in accordance to the HSE policies, compliance of legal requirements and cost control.
  • Checked HSE rules and took part at all safety exercises organized in the rig site.
  • Performed QAQC on prepared fluids and promoted QHSE awareness to the drilling teams.
  • Comply with HSE regulations in all aspects of job performance.
  • Follow all HSE policy prior to initiate the work.

Show More

39. Hthp

low Demand
Here's how Hthp is used in Drilling Fluids Engineer jobs:
  • Experience in HTHP wells utilizing Hematite weighted fluids where maintaining a low ECD was critical to drilling the well successfully.
  • Designed cementing programs and performed daily hydraulics calculations Designed drilling programs and well planning for oil and HTHP gas wells.
  • Supervised 2 onshore and 10 offshore projects with a wide variety of experience drilling in HTHP, deviated and deepwater applications.
  • Keep proper records of inventory Experienced in HTHP wells.

Show More

40. Potential Treatments

low Demand
Here's how Potential Treatments is used in Drilling Fluids Engineer jobs:
  • Advise clients on potential treatments to mud system to optimize drilling parameters.

Show More

41. Fluid Technology

low Demand
Here's how Fluid Technology is used in Drilling Fluids Engineer jobs:
  • Completed Newparks extensive drilling fluid technology course.

Show More

42. Technical Guidance

low Demand
Here's how Technical Guidance is used in Drilling Fluids Engineer jobs:
  • Based on interpreted results of routine and specialized testing, provide technical guidance to maximize wellbore value.
  • Utilized knowledge and training to provide technical guidance on job location.
  • Provide technical guidance of customized engineered fluids to maximize Wellbore value.
  • Provide technical guidance to drillingECUADOR fluids to maximize drilling operation.

Show More

43. Data Analysis

low Demand
Here's how Data Analysis is used in Drilling Fluids Engineer jobs:
  • Performed data analysis and provided recommendations to reduce returned inventory below the 10% target.
  • Advised customers on potential treatments or improvements to the drilling fluids system based on data analysis and mud testing.
  • Reviewed and deliberated newly engineered combat crafts and recommended future design improvements based on data analysis and visual assessments.
  • Experience included data management, engineering/management support, tracking systems, data analysis, programming and documentation support.
  • Transferred emerging products to manufacturing partners through data analysis, and supported off-shift product monitoring during site start-up.
  • Provided Chief Scientist directly with data analysis, technical briefings and supporting documents to defend subject matter expertise.

Show More

44. Accurate Inventory

low Demand
Here's how Accurate Inventory is used in Drilling Fluids Engineer jobs:
  • Controlled accurate inventory levels of mud engineering products and equipment to sustain effective drilling operations to reduce time and cost.
  • Maintained accurate inventory of drilling fluid products.
  • Maintain accurate inventory on all rigs of sack material and volumes of drilling fluids.
  • Check synthetic base mud, keep accurate inventory and reduce fluid costs.
  • Provide accurate inventory and keep in stock on products.
  • Maintain accurate inventory counts on all rigs and ensure inventory that is needed will be on location in a timely manner.

Show More

45. Loss Circulation

low Demand
Here's how Loss Circulation is used in Drilling Fluids Engineer jobs:
  • Manage rig move/loss circulation surface personnel logistics for maximum efficiency.
  • Experienced many loss circulation and zero return situations.
  • Solved problem involving severe loss circulation.
  • Well control / Loss circulation zone drilling experience.
  • Treated contaminations and loss circulation conditions with the appropriate chemicals on-site.
  • Specialize in loss circulation, drilling fluids and waste management to lessen fluid to dewatering facility.

Show More

46. Company Products

low Demand
Here's how Company Products is used in Drilling Fluids Engineer jobs:
  • Utilized knowledge of company products to and services in conjunction with experience in drilling fluid technology to optimize service quality.

Show More

47. Inventory Control

low Demand
Here's how Inventory Control is used in Drilling Fluids Engineer jobs:
  • Saved customer thousands of dollars per day by maintaining proper inventory control.
  • Direct Supervisor for up to 12 people, Inventory control Responsible for coordinating shipping and receiving of equipment.
  • Formulated Daily Mud, Product Selection, Inventory Control, and Recap reports.

Show More

48. System Problems

low Demand
Here's how System Problems is used in Drilling Fluids Engineer jobs:
  • Determined cause of fluid, hole, or system problems to assist in chemical treatments required to optimize drilling parameters.
  • Determined cause of fluid, hole, or system problems to assist in treatment recommendation.
  • Determined fluid, hole and system problems and made treatment recommendations.
  • Determined cause of fluid, hole, or system problems and recommended the most effective and lowest cost solution.

Show More

49. Company Men

low Demand
Here's how Company Men is used in Drilling Fluids Engineer jobs:
  • Make and maintain relationships with company men, drilling superintendents, and drilling engineers to expand business opportunities.
  • Established strong relationship with company men and other rig crew.
  • Generate reports and communicate with operator's personnel, drilling engineer, company men, and crew.
  • Have the ability to interact with the Company Men, & customer & Field Service technician's onsite.

Show More

20 Most Common Skill for a Drilling Fluids Engineer

Mud Pumps11.6%
Fluid Operations9.6%
Safety Meetings9.5%
Fluids Engineer8.7%
Fluid Systems8%
Solids Control Equipment5.5%
Logistics5.1%
Polymer5%

Typical Skill-Sets Required For A Drilling Fluids Engineer

RankSkillPercentage of ResumesPercentage
1
1
Mud Pumps
Mud Pumps
8.2%
8.2%
2
2
Fluid Operations
Fluid Operations
6.8%
6.8%
3
3
Safety Meetings
Safety Meetings
6.7%
6.7%
4
4
Fluids Engineer
Fluids Engineer
6.2%
6.2%
5
5
Fluid Systems
Fluid Systems
5.6%
5.6%
6
6
Solids Control Equipment
Solids Control Equipment
3.9%
3.9%
7
7
Logistics
Logistics
3.6%
3.6%
8
8
Polymer
Polymer
3.5%
3.5%
9
9
Oil Base
Oil Base
3.1%
3.1%
10
10
OBM
OBM
2.8%
2.8%
11
11
Completion Fluids
Completion Fluids
2.7%
2.7%
12
12
Halliburton
Halliburton
2.6%
2.6%
13
13
Water Base
Water Base
2.4%
2.4%
14
14
WBM
WBM
2.3%
2.3%
15
15
Baroid
Baroid
2.2%
2.2%
16
16
Customer Service
Customer Service
1.9%
1.9%
17
17
Environmental Compliance
Environmental Compliance
1.8%
1.8%
18
18
KCL
KCL
1.5%
1.5%
19
19
Billing Purposes
Billing Purposes
1.5%
1.5%
20
20
Fluid Programs
Fluid Programs
1.4%
1.4%
21
21
Product Inventory
Product Inventory
1.4%
1.4%
22
22
H2S
H2S
1.4%
1.4%
23
23
Company Representative
Company Representative
1.3%
1.3%
24
24
Chemical Analysis
Chemical Analysis
1.3%
1.3%
25
25
RAN
RAN
1.2%
1.2%
26
26
Mud Program
Mud Program
1.2%
1.2%
27
27
Chemical Inventory
Chemical Inventory
1.1%
1.1%
28
28
Onsite Services
Onsite Services
1.1%
1.1%
29
29
Chemical Additions
Chemical Additions
1.1%
1.1%
30
30
Phpa
Phpa
1.1%
1.1%
31
31
Chevron
Chevron
1%
1%
32
32
API
API
1%
1%
33
33
Fluid Samples
Fluid Samples
1%
1%
34
34
Chemical Properties
Chemical Properties
1%
1%
35
35
Technical Analysis
Technical Analysis
1%
1%
36
36
Inventory Management
Inventory Management
1%
1%
37
37
Fluid Parameters
Fluid Parameters
0.9%
0.9%
38
38
HSE
HSE
0.9%
0.9%
39
39
Hthp
Hthp
0.9%
0.9%
40
40
Potential Treatments
Potential Treatments
0.9%
0.9%
41
41
Fluid Technology
Fluid Technology
0.9%
0.9%
42
42
Technical Guidance
Technical Guidance
0.8%
0.8%
43
43
Data Analysis
Data Analysis
0.8%
0.8%
44
44
Accurate Inventory
Accurate Inventory
0.8%
0.8%
45
45
Loss Circulation
Loss Circulation
0.8%
0.8%
46
46
Company Products
Company Products
0.8%
0.8%
47
47
Inventory Control
Inventory Control
0.8%
0.8%
48
48
System Problems
System Problems
0.8%
0.8%
49
49
Company Men
Company Men
0.8%
0.8%

5,939 Drilling Fluids Engineer Jobs

Where do you want to work?