Driver/warehouse worker jobs in Oklahoma - 459 jobs

Corporation Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com. This role in summary The FDC driver will support manufacturing by receiving units that are produced via the conveyor system and putting them away to their stow destination. Additional responsibilities include: preparing units for outbound shipments and ensuring it meets quality standards. Your responsibilities will include * Driving a clamp truck (90% backwards) * Being able to work in a team environment * Prepare units for shipments that are delivered across the country and internationally * Ensure outbound units meet the minimum quality standard * Self driven and motivated * Be able to communicate clearly via radio or in-person * Work overtime as needed Minimum requirements Minimum of High School education or equivalent Must have a valid Driver's License and able to pass a Clamp Truck driving test to be certified to operate the equipment Able to drive backwards most of the day while Clamp Truck is carrying load Clear understanding of company policies and procedures and demonstrates the Whirlpool values of integrity, teamwork, diversity and inclusion, and a spirit of winning Demonstrated ability to successfully deliver and sustain results with strong problem solving and decision making skills Exhibits a high capacity to deal with multiple priorities Must demonstrate an extremely high level of attention to detail Takes personal responsibility and demonstrates strong self-initiative. Work involves frequent lifting of materials and product up to 50 pounds Flexibility to work any overtime or adjusted schedule that may be required due to production demands Preferred skills and experiences Experience of driving a forklift or clamp truck is a plus Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers. Additional information about the company can be found on Facebook, Twitter, LinkedIn, Instagram and YouTube. Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

Company Cox Communications, Inc. Job Family Group Supply Chain Job Profile Warehouse Operator I Management Level Individual Contributor Flexible Work Option No remote option; must work at a specified Cox location Travel % Yes, 15% of the time Work Shift Day Compensation Hourly base pay rate is $16.59 - $24.86/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description This role supports the distribution of materials & Customer Product Equipment (CPE) to various boundary partners (Field Service Technicians, Installation Contractors, Solution Stores, 3rd Party Stores, etc.). This individual will research and resolve supply chain inventory issues. They will utilize applications to track, log, and understand inventory levels. They will provide pickup, delivery, and loading/unloading of CPE, materials, equipment and mail by safely operating fleet vehicles. Takes direction and guidance from higher level Supply Chain Specialists. Travel: Position requires travel to and from Tulsa warehouse to work shifts as needed and deliver Cox equipment in the area. PRIMARY RESPONSIBILITIES AND ESSENTIAL FUNCTIONS: * Receiving and put away into assigned Bin/Row locations of CPE shipments and Material products from a Primary Distribution Center (PDC) or manufacturer. * Fulfillment of CPE and Material orders to various boundary partners (Field Service Technicians, Installation Contractors, Solution Stores, 3rd Party Stores, etc.) as well as monitoring inventory levels and restocking appropriately. * Utilizes Warehouse Management System (WMS) applications & scanners to perform warehouse functions. * Processes CPE returns by utilizing WMS application to prepare CPE returns for shipment back to the PDC. Includes sorting, boxing, labeling, shrink wrapping & staging of CPE returns on pallets. * Monitor and restock Quick Pick locations to maintain adequate inventory levels. * Utilizes light warehouse equipment such as pallet jacks, hand trucks and carts. * Displays necessary skills needed to safely operate heavy machinery such as forklifts and larger delivery vehicles, which are used to provide pickup, delivery, and loading/unloading of CPE, materials, equipment, and mail. * May assist in daily cycle counts to audit physical and systemic accuracy of inventory at a warehouse or assigned to boundary partner. * Performs other duties as requested QUALIFICATIONS Minimum- * High School Diploma/GED * Generally less than 2 years' experience in a related field * Safe drivers needed; valid driver's license required * Requires knowledge of basic computing skills (i.e. E-mail, Microsoft Office, etc.) * Capability to develop aptitude for basic warehouse inventory management systems (CHAT, Oracle, ICOMS, etc.) * Ability to learn how to operate warehouse equipment (pallet jack, stretch wrap machine, etc.) * Frequently stands and walks, grasps with hands, reaches at waist. Physically push / pull pallets and carts that contain CPE and Materials: Constant * Ability to lift 50 - 70 pounds to help manage warehouse inventory and transportation of orders: Constant * Ability to carry and use warehouse tools and equipment, work outdoors and in extreme weather conditions, with varying wet and dry locations: Constant * Ability to multi-task and prioritize in a service-oriented, fast-paced team environment: Constant * Requisite ability to a drive company vehicle, including a commercial motor vehicle (DOT physical required where applicable by state law): Frequent * Computer literacy with an aptitude for learning warehouse management systems, communication products and associated items: Frequent * Willingness to work a flexible schedule when assigned to the On Call rotation: Occasional Preferred- * At least 1 year experience operating 20-26 foot box trucks is strongly preferred. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Cox Communications is all about creating moments of real human connection; and for employees, that's true both in the workplace and in the problems we solve for customers. From building advertising solutions to unleashing IoT technologies to creating an exceptional experience for customers in our retail locations and online, we're creating a world that is smarter and more connected. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

Technica LLC seeks to recruit for the position of Warehouse Specialist on a Government contract with a place of performance at Tinker Air Force Base for the DLA Distribution Center on the 3rd shift. We are anticipating the contract to start February 2, 2026. Position Summary * Perform a variety of warehousing duties requiring an understanding of the establishment's storage plan * Verifying materials (or merchandise) against receiving documents, noting and reporting discrepancies and obvious damages * Routing materials to prescribed storage locations * Storing, stacking, or palletizing materials in accordance with prescribed storage methods * Rearranging and taking inventory of stored materials * Examining stored materials and reporting deterioration and damage * Removing material from storage and preparing it for shipment. * May operate hand or power trucks while performing warehousing duties. Basic Requirements: * Must have the ability to obtain and maintain a Secret Clearance and a Common Access Card (CAC) * Must be 18 years or older * Must be able to stand, sit, or walk for extended periods of time * Must be able to lift up 50 lbs * Must be able to work in environment exposed to the elements, both hot and cold. * Have the ability to learn and operate Material Handling Equipment (MHE) of various types to Include stand-up and sit-down forklifts. * At least one-year experience with Supply Management operation systems. * Prior knowledge and experience with Standard Operating Procedures and Safety Procedures Preferred Qualifications: * Experience with DSS and other Government Data Systems * Experience operating Material Handling Equipment (MHE) of various types Including stand-up and sit-down forklifts * Experience with resolving common error conditions * Experience responding to computer output instructions or error conditions * Must be able to pass pre-employment drug screening and background checks related to the position.

Full-time Description WHY JOIN OUR TEAM? Monthly safe driving incentives of up to $2,000 annually (breaks down to an extra $1.00 per hour) K&M Team members are eligible for 401K after 6 months of employment. K&M will match up to 50% of the first 6% invested. You will be able to change the amount invested in your 401K any time after enrollment. K&M offers College Tuition Assistance to all eligible K&M employees who have been employed with us for 6 months. ANY passion you choose to pursue a degree in, K&M Tire will financially assist you in your journey up to $7,000 annually! Healthcare benefits at 90 days. Paid Time Off accrual begins immediately and is available after 90 days. $500 Referral Bonus Company Paid Life Insurance. Reduced employee pricing on our inventory of tires (up to 12 tires per year). Annual Profit Sharing Bonus Opportunities for promotion through our levels system with experience. For those interested in doing more - opportunities for internal promotion to team lead, assistant manager, or manager with no college degree required. We offer pay increases that increase significantly the longer you are employed. In addition, we value promoting from within vs. hiring on the outside. We would love to welcome you to our family! Job Summary: The ROUTE TRUCK DRIVER works under the direction of the Warehouse Manager, Assistant Manager or Team Leader; Responsible for providing our customers with dependable, safe, consistent, professional and friendly service. Vision: To be the leading and most trusted provider of tires and services. Job Duties and Responsibilities: Provide excellent customer service, answering questions and handling complaints professionally. Utilize ELog Pre-trip interface to conduct daily pre-route vehicle inspections. Transport and deliver items to customers on assigned route in a safe, timely manner. Responsible for unloading truck efficiently, accurately and in organized manner. Maintain ongoing communication with supervisor on any issues or concerns. Responsible for making sure all loads are secure and locked until reaching destination. Responsible for obeying all traffic laws, and K&M specific Cell Phone and driving policies. Responsible for using Signature Capture phone to verify and collect COD payments, and attaining a proof of delivery signature at the time of delivery. Responsible for maintaining complete ELog compliance on a daily basis according to regulations. Adhering to assigned route travel path established to satisfy customer needs and efficiency. Responsible for working safely and in a professional manner at all times. Responsible for keeping inside of truck clean. Must support management decisions and company goals. Must be willing to assist with warehouse duties if needed or requested. Perform other duties as appropriate and assigned. Support company goals and uphold K&M Values. Job Requirements: Must have valid driver's license issued by working state and a clean driving record. Special licenses may be required to operate certain vehicles or in certain states. Must be 21 or older. Ability to learn tire knowledge and exercise brand and size accuracy. Ability to communicate and express ideas effectively. Possess a friendly, helpful, positive attitude. Must be able to lift up to 75 pounds. Route Driver Minimum Qualifications: Must be able to read, write and communicate effectively. Must be able to read/understand U.S. Highway traffic signs and signals. Must have two years' work experience SALARY: $16.75-18.75 SCHEDULE: Monday - Friday, 0630-1530 K&M Tire is an Equal Opportunity Employer.

Job Title: Material Handler Company: Glo Tanning Glo Tanning is seeking reliable and motivated Material Handlers to support daily warehouse and inventory operations. This role is ideal for individuals who enjoy hands-on work, staying organized, and contributing to a fast-paced team environment. Responsibilities Receive, inspect, and stock incoming shipments Accurately pick, pack, and prepare materials for distribution Move materials throughout the facility using carts, pallet jacks, or other equipment Maintain accurate inventory counts and report discrepancies Keep storage areas clean, organized, and safe Follow all company safety policies and procedures Assist with loading and unloading deliveries as needed Perks & Benefits Competitive hourly pay Employee discounts on products and services Flexible scheduling Supportive and positive team environment Opportunities for growth and advancement Hours & Availability Part-time and full-time positions available Day, evening, and weekend shifts may be required Typical shifts range from 48 hours Qualifications Must be 18+ Ability to lift and move materials (up to specified weight, as applicable) Strong attention to detail and organization Reliable, punctual, and team-oriented Warehouse or material handling experience preferred, but not required (training provided) Required qualifications: Legally authorized to work in the United States Preferred qualifications: 18 years or older

Company Cox Communications, Inc. Job Family Group Supply Chain Job Profile Warehouse Operator I Management Level Individual Contributor Flexible Work Option No remote option; must work at a specified Cox location Travel % Yes, 15% of the time Work Shift Day Compensation Hourly base pay rate is $16.59 - $24.86/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description This role supports the distribution of materials & Customer Product Equipment (CPE) to various boundary partners (Field Service Technicians, Installation Contractors, Solution Stores, 3rd Party Stores, etc.). This individual will research and resolve supply chain inventory issues. They will utilize applications to track, log, and understand inventory levels. They will provide pickup, delivery, and loading/unloading of CPE, materials, equipment and mail by safely operating fleet vehicles. Takes direction and guidance from higher level Supply Chain Specialists. Travel: Position requires travel to and from Tulsa warehouse to work shifts as needed and deliver Cox equipment in the area. PRIMARY RESPONSIBILITIES AND ESSENTIAL FUNCTIONS: Receiving and put away into assigned Bin/Row locations of CPE shipments and Material products from a Primary Distribution Center (PDC) or manufacturer. Fulfillment of CPE and Material orders to various boundary partners (Field Service Technicians, Installation Contractors, Solution Stores, 3rd Party Stores, etc.) as well as monitoring inventory levels and restocking appropriately. Utilizes Warehouse Management System (WMS) applications & scanners to perform warehouse functions. Processes CPE returns by utilizing WMS application to prepare CPE returns for shipment back to the PDC. Includes sorting, boxing, labeling, shrink wrapping & staging of CPE returns on pallets. Monitor and restock Quick Pick locations to maintain adequate inventory levels. Utilizes light warehouse equipment such as pallet jacks, hand trucks and carts. Displays necessary skills needed to safely operate heavy machinery such as forklifts and larger delivery vehicles, which are used to provide pickup, delivery, and loading/unloading of CPE, materials, equipment, and mail. May assist in daily cycle counts to audit physical and systemic accuracy of inventory at a warehouse or assigned to boundary partner. Performs other duties as requested QUALIFICATIONS Minimum- High School Diploma/GED Generally less than 2 years' experience in a related field Safe drivers needed; valid driver's license required Requires knowledge of basic computing skills (i.e. E-mail, Microsoft Office, etc.) Capability to develop aptitude for basic warehouse inventory management systems (CHAT, Oracle, ICOMS, etc.) Ability to learn how to operate warehouse equipment (pallet jack, stretch wrap machine, etc.) Frequently stands and walks, grasps with hands, reaches at waist. Physically push / pull pallets and carts that contain CPE and Materials: Constant Ability to lift 50 - 70 pounds to help manage warehouse inventory and transportation of orders: Constant Ability to carry and use warehouse tools and equipment, work outdoors and in extreme weather conditions, with varying wet and dry locations: Constant Ability to multi-task and prioritize in a service-oriented, fast-paced team environment: Constant Requisite ability to a drive company vehicle, including a commercial motor vehicle (DOT physical required where applicable by state law): Frequent Computer literacy with an aptitude for learning warehouse management systems, communication products and associated items: Frequent Willingness to work a flexible schedule when assigned to the On Call rotation: Occasional Preferred- At least 1 year experience operating 20-26 foot box trucks is strongly preferred. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Cox Communications is all about creating moments of real human connection; and for employees, that's true both in the workplace and in the problems we solve for customers. From building advertising solutions to unleashing IoT technologies to creating an exceptional experience for customers in our retail locations and online, we're creating a world that is smarter and more connected. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship.Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

The driver / warehouse position is responsible for maintaining a professional appearance and knowledge of materials delivered to the customer. The driver / warehouse employee will safely drive and handle all materials in accordance to the company standards of service. This position is also responsible for various duties related to the handling of materials in the warehouse. This position receives, stores and distributes material, tools equipment and products within the warehouse, ensuring accuracy and timeliness of all job functions. Reports to: Warehouse Manager or Profit Center Manager Minimum Qualifications: + High School diploma or GED + Class E drivers license (Class C for drivers in Illinois) COMPETENCIES + Communication Proficiency + Thoroughness + Organizational Skills + Time Management + Technical Capacity Preferred Qualifications: + 3 to 4 years of experience in material handling preferred + 3 to 4 years of customer service experience preferred + 2+ years' experience in Electrical supply industry preferred Working Conditions: This position operates in a warehouse setting, with some outdoor exposure during the workday. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as standard warehouse equipment such as hand trucks, box cutters and tape dispensers. Supervisory Responsibilities: No Essential Job Functions: + Deliver company materials to customers in a professional manner + Effectively and professionally meet and communicate with the public + Drive, automatic/manual transmission vehicle (safely & legally, driving violations may jeopardize your position as a driver) + Shipping and receiving duties; including loading and unloading trucks + Read customer orders, work orders, shipping orders to determine items to picked, packed, distributed or shipped/transferred + Move materials and items from receiving or storage areas to shipping or to other designated areas. + Sort and place materials or items on racks, shelves or in bins according to predetermined sequence + Assemble customer orders from stock and place orders on pallets or shelves, or relocate orders to a holding area or shipping department + Use computer and RF guns to manage sales orders, inventory and enter information into business management system + Participate in cycle counting of physical inventory + Open boxes and other containers + Operate wire cutter to cut wire according to customer orders + Operate forklift in warehouse setting + Sweep, dust and mop. Organize warehouse and work area for orderliness at all times + Ensure warehouse is accessible and safe for salespeople and customer traffic + Assist customers at will call and walk-ins as required CED is an Equal Opportunity Employer - Disability | Veteran

We are hungry, and we aren't just talking about sandwiches! Come taste success at one of America's largest restaurant franchisees. Want to learn more? Watch our video! (**************************** Our Mission: Put people at the heart of everything we do Our Values: Genuine Hospitality, Employee Development, Growth & Profitability, Operational Excellence, Products & Safety, Community Involvement Hourly Pay Rate: $9.00 - $15.50 / per hour About the Hourly Team Member position: Be prepared to smile!Happy team members make for happy customers Ditch the outdated uniform! Our hourly team members wear jeans and t-shirts Were a no grease zone! You wont go home smelling like an old French fry. Our work environment is clean and safe This job is fun and flexible!Youve got a life outside of work and we want you to live it fully Talk about great benefits! We offer medical, dental, vision insurance.* Tuition reimbursement, 401(k) with an employer match, performance-basedpay and meal discounts! Get ready to learn and grow!Wantto advance in your career? Wecant wait to help you do just that Same day pay available! Job Requirements: Greet and interact with guests Sell, serve and prepare our deliciousmenu items Prepare the restaurant to be a welcoming environment for each and every guest * Must satisfy one year of service and meet ACA eligibility requirements The Saxton Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. RequiredPreferredJob Industries Food & Restaurant

The Warehouse Receiver is responsible for accurately receiving, inspecting, and processing all incoming shipments of products. This role ensures inventory is accounted for, stored properly, and ready for distribution. The position requires attention to detail, the ability to work in a fast-paced warehouse environment, and strong communication with team members. Responsibilities Receive incoming deliveries; verify counts, product codes, and quality against purchase orders and bills of lading. Inspect shipments for damage, shortages, or discrepancies and report issues promptly. Unload trucks safely and efficiently using forklifts, pallet jacks, or other equipment. Accurately document and record received goods in the warehouse management system. Tag, label, and properly organize products in designated warehouse locations. Replenish the front pick line as needed to ensure products are available for order fulfillment. Inspect inventory for expiration dates, rotate stock properly to maintain product freshness and prevent expiration. Assist with loading trucks as needed. Moves trucks/vans within the warehouse or between designated locations as required. Maintain cleanliness, safety, and organization of receiving and storage areas. Communicate with drivers and supervisors to ensure smooth receiving operations. Adhere to all safety and company compliance standards. Perform other general warehouse duties as assigned. Requirements Qualifications: Highschool Diploma or GED equivalent Valid Driver's license with clean driving record 1+ years of warehouse receiving experience WMS experience (Encompass or other Warehouse Management Systems) preferred Comfortable working in varying warehouse temperatures Ability to lift and move up to 50 lbs. repeatedly Ability to obtain Powered Industrial Truck (PIT) certification to safely operate warehouse equipment (forklift, pallet jack etc.) Strong attention to detail and accuracy Ability to work in a fast-paced, team-oriented environment Physical Demands: This role requires regular standing, walking and reaching. Must be able to regularly lift and move products ranging from 25 to 170 pounds, as well as climb, reach, and perform other physical movements necessary to carry out the essential duties of the position. Work is performed in a warehouse environment where steel-toed footwear is required. Benefits 401(k) matching - A&B Distributors will contribute 100% of the first 5% after one year of service Accident Insurance Critical Illness Insurance Dental Insurance Disability Insurance Employee Assistance Program Health Insurance PPO Life Insurance Paid Holidays - 9 per year Paid Parental Leave Sick - One week of sick each year Wellness Program Vacation - Two Weeks starting Vision Insurance EQUAL OPPORTUNITY EMPLOYER A&B Distributors provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

DSV - Global transport and logistics In 1976, ten independent hauliers joined forces and founded DSV in Denmark. Since then, DSV has evolved to become the world's 3rd largest supplier of global solutions within transport and logistics. Today, we add value to our customers' entire supply chain by transporting, storing, packaging, re-packaging, processing and clearing all types of goods. We work every day from our many offices in more than 80 countries to ensure a steady supply of goods to production lines, outlets, stores and consumers all over the world. Our reach is global yet our presence is local and close to our customers. Read more at *********** Location: USA - Tulsa, East 27th Street N. Division: Solutions Job Posting Title: Warehouse Operator Time Type: Full Time POSITION SUMMARY The Warehouse Clerk has the basic responsibility for label control, yard coordination, and administrative functions in support of the entire outbound (Shipping and Picking) operation. Warehouse Clerk is also responsible for communicating issues to the outbound supervisors in a timely manner. Must have Excel Experience and be computer literate. ESSENTIAL DUTIES AND RESPONSIBILITIES Label Control: * Prepare, distribute, and reprint all labels for carton/pallet pickers daily in a fair and consistent manner. Maintain a clear, consistent label flow to allow pickers the opportunity to perform in a safe, accurate, and productive manner without issue or hindrance. Track and document all labels given out. Yard Coordination: * Utilize Y/WMS system to communicate outbound pulls and plugs to yard drivers on a daily basis. Assist supervisor to ensure trailer is properly chocked and green light is active before trailers are moved or loading begins. Administrative Functions: * Complete computer data entry required for shipments. Issue seals to loaders. Verify accurate, pertinent information (i.e., seal number, trailer number, store number, etc.) in order to prepare Bills of Lading (BOL's) for all completed outbound loads. Schedule LTL carriers for pickup (site specific). Print work assignments for replenishment drivers. Document and file all outbound related paperwork in a neat and orderly fashion. Multitask and work with a high sense of urgency in the performance of all duties. Assist outbound supervisors with compiling and tracking downtime sheets as required. Provide service and adhere to professional etiquette when communicating with members of management, peers, customers, and visitors. Safety, Sanitation, Security: * Maintain a clean, neat, and orderly work area. Assist in maintaining the security of the warehouse. Ensure all seals and sensitive documents are properly secured when not in use. Distribute and collect tools and equipment (i.e., RF guns, bolt cutters, etc.) to associates and report issues to outbound supervisors in a timely manner. Conduct operations in a manner, which promotes safety. Conduct operations in accordance with OSHA and MSDS Standard OTHER DUTIES * Safe use of powered equipment, RF scanners, computers, and printers. * Follow company policies, guidelines, and ISO procedures * Exposure to varied environmental conditions (heat, cold, dry, humid, light, dark, dusty, etc.) * Repeated heavy lifting over 25 pounds as needed * Repetitive motion consisting of (but not limited to) walking, climbing, and carrying * Repetitive stationary activities consisting of (but not limited to) standing, sitting, bending, stretching, stooping, kneeling, crouching, squatting, reaching, pushing, pulling, holding, and grasping * Details may vary dependent on work function - the duties are all inclusive as associates may be requested to assist in various areas of the operation as needed. * Performs other duties as assigned. * Work overtime as dictated by business whether mandatory or voluntary. SUPERVISORY RESPONSIBILITIES * None MINIMUM REQUIRED QUALIFICATIONS Education and/or Experience * Must have a high school diploma or general education degree (GED). * 1-3 years' experience working in inventory control or warehousing admin experience. Certificates, Licenses, Registrations or Professional Designations * None Other * Must be able to work in unregulated temperatures within the warehouse during the warmer and colder months can range from mild to moderate. SKILLS, KNOWLEDGE AND ABILITIES Computer Skills * Intermediate computer skills * RF Scanners * Proficient MS Office Applications Language Skills * English (reading, writing, verbal) Mathematical Skills * Basic to intermediate level to verify quantities of product, count inventory, or perform other duties associated with handling, storing, and distributing client products. Other * Strong attention to detail accuracy and accomplish job task in a timely manner. * Ability to perform duties with minimal supervision or guidance. * Must be able to effectively adapt to change and thrive in a stimulating, fast-paced work environment. * Effective communication skills PREFERRED QUALIFICATIONS * 1-2 years' experience working in a warehouse/logistics/distribution environment * 1-2 years' experience working with Warehouse Management Systems (WMS) PHYSICAL DEMANDS Occasionally * Bending Frequently * Walking and Standing Constantly * Sitting Ability to Lift/Carry and Push/Pull * 11-20 pounds * Reach above shoulder, squat, or kneel. WORK ENVIRONMENT While performing the duties of this job, the employee rarely is exposed to fumes or airborne particles, toxic or caustic chemicals. The noise level in the work environment is usually low to moderate. Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. DSV is an equal employment opportunity employer. Candidates are considered for employment without regard to race, creed, color, national origin, age, sex, religion, ancestry, disability, veteran status, marital status, gender identity, sexual orientation, national origin, or any other characteristic protected by applicable federal, state or local law. If you require special assistance or accommodation while seeking employment with DSV, please contact Human Resources at *************. If you are interested in learning the status of your application, please note you will be contacted directly by the appropriate human resources contact person if you are selected for further consideration. DSV reserves the right to defer or close a vacancy at any time. DSV - Global transport and logistics Working at DSV means playing in a different league. As a global leader in transport and logistics, we have been on an extraordinary journey of growth. Let's grow together as we continue to innovate, digitalise and build on our achievements. With close to 160,000 colleagues in over 90 countries, we work every day to offer solid services and meet our customers' needs and help them achieve their goals. We know that the best way to achieve this is by bringing in new talent, fresh perspectives and ambitious individuals like you. At DSV, performance is in our DNA. We don't just work - we aim to shape the future of logistics. This ambition fuels a dynamic environment built on collaboration with world-class team players, accountability and action. We value inclusivity, embrace different cultures and respect the dignity and rights of every individual. If you want to make an impact, be trusted by customers and grow your career in a forward-thinking company - this is the place to be. Start here. Go anywhere Visit dsv.com and follow us on LinkedIn and Facebook. open/close Print Share on Twitter Share on LinkedIn Send by email

Reports to: Warehouse Supervisor Classification: Non-exempt has no direct reports Type and Expected Hours of Work This is a full-time position. Must be flexible to work overtime and weekends as necessary as customer demands could cause staff to work outside normal business operating hours. POSITION OVERVIEW As a Warehouse Operator your primary duty will be to service, protect and care for our customers goods that are stored in our facility warehouse space. In this role you will be tasked with operating various pieces of warehouse equipment to accomplish work activity. On a daily basis it will be the principal duty of the Warehouse Operator to carefully unload, inspect, stack and store, and eventually pick and ship customers products diligently and with a high degree of safety in mind. Operators will need to be good at counting, keeping track and documenting all activity pertaining to loading, unloading and storing customer goods. The employee will have a good understanding of warehouse processes and flow of goods in and out of the facility. ESSENTIAL FUNCTIONS Conduct all warehouse functions guided by company policies and procedures, safety, customer requests and the Customer Service Department Support and abide by the company's safety and security programs, initiatives, policies and procedures Complete warehouse tasks utilizing RF Scanners, forklifts (sit down and standup) pallet jacks, stretch wrappers etc. Receiving Freight : Unload material off semi-truck trailers Inspect, account and receive product into the Warehouse Management System (WMS) Count all product and measure against work orders to ensure accuracy of shipment Report shortages/overages/damages/mis-shipments on appropriate forms or scanners Efficiently stack and store product in a manner that will not damage products Compare to manifest and check all shipments for seals, damage, infestation and unique product identifiers (lots, batches, serial numbers, etc.) Inventory: Store product in a manger that meets product storage comingling requirements Always account for inventory moves in the WMS Report any changes, damages or deterioration in stored product Always stack and store product that is neat and organized Order Picking: Ensure that the correct product and quantity is picked, and the physical inventory matches the work orders When picking, pick in a manner that prevents any type of product damage Stage and conduct one final inspection of product to ensure product is damage free and the physical inventory matches the work order Shipping Freight: Ensure completeness and accuracy of outbound shipments Ensure the product is handled in a manner that keeps the product damage free when loading product onto trailers Inspect and clean trailers to ensure trailer is free of any debris or contaminates that could potentially damage the product Understands trailing loading and weight distribution requirements Secure freight in conjunction with customer requirements Verify that the trailer is properly sealed Communicate with the CSR, Traffic and Supervisor when load is complete Equipment: Maintain the equipment in a neat, clean and orderly fashion Operate equipment safely and efficiently that complies with OSHA and company standards of operation Use Personal Protective Equipment (PPE) when necessary Other Duties: Maintain a neat, clean and orderly work area and ensure company housekeeping policies and procedures are kept Assist in cleaning warehouse, trailers, railcars and grounds as needed Complete all duties in a manner that promotes safety at all times Lump, package, repack, rework, kitting and light assembly of customer's products Any additional duties as assigned by management COMPETENCIES Attention to detail - Job requires being careful about detail and thorough in completing work tasks. Basic math to include adding, subtracting, multiplying, dividing and counting Team oriented-Will work well with others to get a project completed Communication proficiency to included reading and writing in English Stress tolerance - Job requires accepting criticism and dealing calmly and effectively with high stress situations Dependability - Job requires being reliable, responsible, and dependable, and fulfilling obligations Achievement/effort - Job requires establishing and maintaining personally challenging achievement goals and exerting effort toward mastering tasks while having a high degree of pride in the work one performs WORK ENVIRONMENT This position works in a warehouse setting. Warehouse temperatures can vary according to the season. REQUIRED EDUCATION AND EXPERIENCE: High school diploma or GED Experienced with a forklift PREFERRED EDUCATION AND EXPERIENCE Forklift Certification 2 years warehouse distribution experience 2 years hand scanner experience PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stand; walk; and stoop, kneel, and crouch. The employee is occasionally required to sit and climb or balance. The employee must regularly lift and/or move objects up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. QUALITY STATEMENT All employees play a pivotal role to ensure quality objectives happen at every level within the organization. Every employee is expected to improve each day, adhere to customer and regulatory requirements, and continuously strive to exceed company and customer expectations. AAP/EEO STATEMENT United Warehouse Company provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. The above noted job description is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give a general sense of the responsibilities and expectations of position. As the nature of business demands change so, too, may the essential functions of this position.

Material Handler/Driver - Loads and unloads inbound freight and outbound finished product. Moves materials within the plant and transfers finished product to the warehouse. Delivers installation materials to job site. Hours are 4/10's from Tuesday through Friday, from 6:00 a.m. to 4:30 p.m., with overtime as needed. Essential Duties and Responsibilities: Reads work order or follows oral instructions to ascertain materials to be moved. Lifts heavy objects by hand or with forklift or pallet jacks. Can become certified to operate forklift through Company's forklift certification procedure. Loads and unloads materials onto or from pallets, trays, racks, and shelves by hand. Loads materials into vehicles and installs strapping, bracing, or padding to prevent shifting or damage in transit. Loads truck for Truck Operators. Moves materials from storage or work sites to designated area. Secures lifting attachments to materials and conveys load to destination or hoisting operators to move load to destination. Opens shipping containers, Counts, and records the number of units of materials moved or handled on designated production sheets. Attaches identifying tags or labels to materials or marks information on cases, pallets, or other containers; Assembles crates to safely ship products. Stacks or assembles materials into bundles and bands bundles together. Qualifications: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Maintaining quality and safety standards. Must have computer experience, including experience with Microsoft products such as word, excel and outlook. Responds appropriately to requests for routine information and communicates clearly and accurately and promptly. Demonstrates a flexible, positive ‘can do' approach to delivering team results. Must have valid Drivers License and clean driving record. Ability to obtain DOT Certification (non-CDL) and maintain DOT physical requirements. Education/Experience: High school diploma or GED; or one to three months related experience and/or training; or equivalent combination of education and experience. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and fumes or airborne particles. The employee is occasionally exposed to extreme heat. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. The employee is frequently required to stand; use hands, fingers, handle, reach with hands and arms. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl, talk and hear. This is a safety-sensitive position. Bearwood Concepts, Inc. is an equal employment employer F/M/Disability/Vet/Sexual Orientation/Gender Identity.

Job DescriptionDescriptionGD Energy Products - New Name, Same Legacy The company you have known as Gardner Denver High Pressure Solutions has a new name - GD Energy Products. Now for more than 160 years, we have made it our business to lead the industry with unmatched products and services; and I can promise that while our identity may change, deep down, who we are as a company never will. GD Energy Products is looking for a Warehouse Operator to work in Tulsa, OK. When joining GD Energy Products, you will be eligible for many of our competitive benefits, including: vacation, 401K matching, paid holidays, sick days, full medical/dental/vision benefits, short/long term disability, maternity/paternity leave and many more. Job Summary: Working under minimal supervision, provide accurate and timely inbound and outbound movement of materials, parts, sub-assemblies and full assemblies. Position involves use of equipment and movement devices including cranes, forklifts, pallet jacks, ladders, stairs, or pneumatic lifts, and rolling carts to assist in receiving inbound freight, pull inventory items for use or shipment, and to load and unload trucks. Additionally, driving to various work sites to complete inventory of consignment parts. Position requires accurate inventory counts, detailed paperwork and strong communication skills. Duties/Responsibilities: • Counts, weighs and accurately identifies all items received and shipped. Ensures that materials are verified against vendor's invoices, bills of lading, customer orders, shipping documents and or other documentation • Maintains accurate records of damaged or defective items and discrepancies in quantities and weights and records critical information such as time, date, quantity, source and destination of materials received or shipped. Provides accurate and timely documentation per work instructions to ensure accuracy of data entered into the ERP system • Prepares items for shipments. Pulls parts, adequately packages items for safe transit, appropriately labels items for accurate shipping and notifies carriers as required to ensure timely shipment of materials • Operates forklifts, cranes, pallet jacks, pneumatic lifts and utilizes ladders, steps, rolling carts or other material handling equipment to safely access and move materials • Utilizes computer to prepare shipping documents, reconcile shipping records with carriers and records data. Communicates via email with internal and external customers, vendors and transportation companies • Uses computer to perform data entry in business system (SAP) or other computer applications which may Microsoft Word, Power Point & Excel documents. • Serves as a resource with full knowledge of warehouse procedures and functions. • May assist in training new employees; shares knowledge gained through experience • Completes cycle counting and reconciliation in SAP. • Works directly with outside customers on transportation and shipment of goods; may deliver and pick up material from customers or vendors • Performs all work in accordance with established safety and quality management procedures. • Regular attendance and compliance with all Company policies and rules is an essential function for the job. Overtime, including potential for nights and/or weekend shifts may be required. • Perform all other duties as assigned. Required Skills/Abilities: • Three (3) years combined experience in material handling, inventory, shipping and receiving preferred • Demonstrated safe operation of forklift(s) and other material handling preferred • Experience in selection of and coordination with common carriers (UPS, FedEx, LTL and OTR truck lines for safe and compliant transport of goods intra- and inter-state • Knowledge of US DOT rules and regulations for shipping industrial and hazardous materials. • Computer proficiency using Microsoft Word and Excel and e-mail program(s). Experience with ERP system (preferably SAP). Education and Experience: • High school diploma or the equivalent preferred • On-site industrial forklift training and certification will be required within orientation & training period Physical Requirements:• Must be able to lift up to 50 pounds at times. • Ability to move around the warehouse. GD Energy Products is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, creed, age, sex, sexual orientation, gender identity, pregnancy, national origin, disability or protected veteran status, as well as any other characteristic protected by applicable law, regulation or local ordinance. For more information about your rights under the law, see ***********************************************************************

Location: Sand Springs Material Handler/ Forklift Pay Rate and Hours: $17-$19 Monday- Thursday 6am- 4:30pm Material Handler/ Forklift Job Description: . Material Handler/ Forklift Skills: Loads, unloads, and moves materials within or near plant, yard, or work site, performing any combination of following duties: Reads work order or follows oral instructions to ascertain materials or containers to be moved Opens containers, using steel cutters, crowbar, clawhammer, or other hand tools Loads and unloads materials onto or from trucks, trays, racks, and shelves by forklift Loads materials into vehicles and installs strapping, bracing, or padding to prevent shifting or damage in transit, using hand tools Conveys materials to or from storage or work sites to designated area, using forklift May occasionally operate forklift to assist in loading or moving materials and products Must be able to read a tape measure. Use simple math, general knowledge of steel shapes Key Personnel Benefits While on Key Personnel's payroll, you can access Key's benefits package, including health, dental, vision, term life insurance, short term disability, PTO and more!Apply today! In order to make the best use of your time, only qualified applicants will be contacted.Our office is located at 9717 E. 42nd St (Tech Ridge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I9 form between the hours of 8 am to 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer.#INDLI26

Job Overview:Fork Lift Operator - Tulsa, Oklahoma The Forklift Operator is responsible for loading, unloading, staging, pulling and distributing pallets of Keurig Dr Pepper product supplies while meeting productivity requirements. Shift and Schedule: Full-time Monday-Friday 11:30AM - finished Flexibility to work overtime as needed is required Position ResponsibilitiesLoad and unload trucks. Lift, carry, pick, and stack materials. Supply production line with empty containers. Remove full product from palletizer to staging area. Supply packaging material, cartons and hulls to line as needed. Spot trailers as directed. Maintain pallet supply for palletizer. Rotate floor stock by moving oldest product first. Perform general housekeeping duties in the warehouse or production area and duties as assigned. Available to work all shifts, weekends and overtime. Total Rewards:Pay starting at $19. 13 per hour. The employee will move to a higher rate of $20. 11 per hour in the quarter after their 6 month anniversary. Benefits, subject to eligibility: Medical, Dental and Vision, Paid Time Off, 401(k) program with employer match, Child & Elder Care, Adoption Benefits, Paid Parental Leave, Fertility Benefits, Employee Resource Groups, Breastmilk Shipping Services, Dependent Scholarship Program, Education Assistance, Employee Assistance Program, Personalized Wellness Platform and more! Requirements:High school diploma or general equivalency diploma (GED) preferred1 year of forklift operation experience Lift, push, and pull a minimum of 50 pounds repeatedly Company Overview: Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partner brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it!Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us?We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A. I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to kdpjobs@kdrp. com in lieu of clicking Apply. Please include the job title and location or Job ID # in the email subject line.

**Requisition ID:** 70085 Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including _Whirlpool_ , _KitchenAid_ , _JennAir, Maytag_ , _Amana,_ _Brastemp_ , _Consul_ , and _InSinkErator_ . In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com . **This role in summary** _The FDC driver will support manufacturing by receiving units that are produced via the conveyor system and putting them away to their stow destination. Additional responsibilities include: preparing units for outbound shipments and ensuring it meets quality standards._ **Your responsibilities will include** + **Driving a clamp truck (90% backwards)** + **Being able to work in a team environment** + **Prepare units for shipments that are delivered across the country and internationally** + **Ensure outbound units meet the minimum quality standard** + **Self driven and motivated** + **Be able to communicate clearly via radio or in-person** + **Work overtime as needed** **Minimum requirements** _Minimum of High School education or equivalent_ _Must have a valid Driver's License and able to pass a Clamp Truck driving test to be certified to operate the equipment_ _Able to drive backwards most of the day while Clamp Truck is carrying load_ _Clear understanding of company policies and procedures and demonstrates the Whirlpool values of integrity, teamwork, diversity and inclusion, and a spirit of winning_ _Demonstrated ability to successfully deliver and sustain results with strong problem solving and decision making skills_ _Exhibits a high capacity to deal with multiple priorities_ _Must demonstrate an extremely high level of attention to detail_ _Takes personal responsibility and demonstrates strong self-initiative._ _Work involves frequent lifting of materials and product up to 50 pounds_ _Flexibility to work any overtime or adjusted schedule that may be required due to production demands_ **Preferred skills and experiences** _Experience of driving a forklift or clamp truck is a plus_ Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers (********************************* . Additional information about the company can be found on Facebook (*************************************** , Twitter (********************************* , LinkedIn (************************************************************ , Instagram (**************************************** and YouTube (************************************************* . Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

Job Description Technica LLC seeks to recruit for the position of Warehouse Specialist on a Government contract with a place of performance at Tinker Air Force Base for the DLA Distribution Center on the 3rd shift. We are anticipating the contract to start February 2, 2026. Position Summary Perform a variety of warehousing duties requiring an understanding of the establishment's storage plan Verifying materials (or merchandise) against receiving documents, noting and reporting discrepancies and obvious damages Routing materials to prescribed storage locations Storing, stacking, or palletizing materials in accordance with prescribed storage methods Rearranging and taking inventory of stored materials Examining stored materials and reporting deterioration and damage Removing material from storage and preparing it for shipment. May operate hand or power trucks while performing warehousing duties. Basic Requirements: Must have the ability to obtain and maintain a Secret Clearance and a Common Access Card (CAC) Must be 18 years or older Must be able to stand, sit, or walk for extended periods of time Must be able to lift up 50 lbs Must be able to work in environment exposed to the elements, both hot and cold. Have the ability to learn and operate Material Handling Equipment (MHE) of various types to Include stand-up and sit-down forklifts. At least one-year experience with Supply Management operation systems. Prior knowledge and experience with Standard Operating Procedures and Safety Procedures Preferred Qualifications: Experience with DSS and other Government Data Systems Experience operating Material Handling Equipment (MHE) of various types Including stand-up and sit-down forklifts Experience with resolving common error conditions Experience responding to computer output instructions or error conditions Must be able to pass pre-employment drug screening and background checks related to the position.

The driver / warehouse position is responsible for maintaining a professional appearance and knowledge of materials delivered to the customer. The driver / warehouse employee will safely drive and handle all materials in accordance to the company standards of service. This position is also responsible for various duties related to the handling of materials in the warehouse. This position receives, stores and distributes material, tools equipment and products within the warehouse, ensuring accuracy and timeliness of all job functions. Reports to: Warehouse Manager or Profit Center Manager Minimum Qualifications: + High School diploma or GED + Class E drivers license (Class C for drivers in Illinois) COMPETENCIES + Communication Proficiency + Thoroughness + Organizational Skills + Time Management + Technical Capacity Preferred Qualifications: + 3 to 4 years of experience in material handling preferred + 3 to 4 years of customer service experience preferred + 2+ years' experience in Electrical supply industry preferred Working Conditions: This position operates in a warehouse setting, with some outdoor exposure during the workday. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as standard warehouse equipment such as hand trucks, box cutters and tape dispensers. Supervisory Responsibilities: No Essential Job Functions: + Deliver company materials to customers in a professional manner + Effectively and professionally meet and communicate with the public + Drive, automatic/manual transmission vehicle (safely & legally, driving violations may jeopardize your position as a driver) + Shipping and receiving duties; including loading and unloading trucks + Read customer orders, work orders, shipping orders to determine items to picked, packed, distributed or shipped/transferred + Move materials and items from receiving or storage areas to shipping or to other designated areas. + Sort and place materials or items on racks, shelves or in bins according to predetermined sequence + Assemble customer orders from stock and place orders on pallets or shelves, or relocate orders to a holding area or shipping department + Use computer and RF guns to manage sales orders, inventory and enter information into business management system + Participate in cycle counting of physical inventory + Open boxes and other containers + Operate wire cutter to cut wire according to customer orders + Operate forklift in warehouse setting + Sweep, dust and mop. Organize warehouse and work area for orderliness at all times + Ensure warehouse is accessible and safe for salespeople and customer traffic + Assist customers at will call and walk-ins as required CED is an Equal Opportunity Employer - Disability | Veteran Other Compensation: The following additional compensation may be applicable for this position: + Profit Sharing Benefits: Benefits available for this position are: + Insurance - Medical, Dental, Vision Care for full-time positions + Disability Insurance + Life Insurance + 401(k) + Paid Sick Leave + Paid Holidays + Paid Vacation + Health Savings Account (HSA) and matching + Dependent Care Flexible Spending Account (FSA) + Teledoc + Paid Pregnancy & New Parent Leave

Job Description Material Handler/Driver - Loads and unloads inbound freight and outbound finished product. Moves materials within the plant and transfers finished product to the warehouse. Delivers installation materials to job site. Hours are 4/10's from Tuesday through Friday, from 6:00 a.m. to 4:30 p.m., with overtime as needed. Essential Duties and Responsibilities: Reads work order or follows oral instructions to ascertain materials to be moved. Lifts heavy objects by hand or with forklift or pallet jacks. Can become certified to operate forklift through Company's forklift certification procedure. Loads and unloads materials onto or from pallets, trays, racks, and shelves by hand. Loads materials into vehicles and installs strapping, bracing, or padding to prevent shifting or damage in transit. Loads truck for Truck Operators. Moves materials from storage or work sites to designated area. Secures lifting attachments to materials and conveys load to destination or hoisting operators to move load to destination. Opens shipping containers, Counts, and records the number of units of materials moved or handled on designated production sheets. Attaches identifying tags or labels to materials or marks information on cases, pallets, or other containers; Assembles crates to safely ship products. Stacks or assembles materials into bundles and bands bundles together. Qualifications: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Maintaining quality and safety standards. Must have computer experience, including experience with Microsoft products such as word, excel and outlook. Responds appropriately to requests for routine information and communicates clearly and accurately and promptly. Demonstrates a flexible, positive ‘can do' approach to delivering team results. Must have valid Drivers License and clean driving record. Ability to obtain DOT Certification (non-CDL) and maintain DOT physical requirements. Education/Experience: High school diploma or GED; or one to three months related experience and/or training; or equivalent combination of education and experience. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and fumes or airborne particles. The employee is occasionally exposed to extreme heat. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. The employee is frequently required to stand; use hands, fingers, handle, reach with hands and arms. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl, talk and hear. This is a safety-sensitive position. Bearwood Concepts, Inc. is an equal employment employer F/M/Disability/Vet/Sexual Orientation/Gender Identity. Powered by JazzHR 6lrlz15tGE