Inspector jobs at Duro-Last - 50 jobs

The inspector is responsible for oversight of the fabrication facility's quality assurance on behalf of Bureau Veritas's client, in addition to on-site inspections during the construction phase. The inspector must have significant knowledge of the American welding Society (AWS) codes and demonstrable experience in a similar position. The skills required for this position include: * Communicating with the Project Manager to determine the specific requirements of a given work order, including the scope of work, deliverables, schedule, and budget for a particular assignment; * Communication with the Project Manager, fabrication shops, contractors, and other third parties to resolve schedule issues; * Ensure that the services provided are performed in accordance with the project requirements and contract with the client; * Generate and process timesheets, billing reports, and inspection reports in an expeditious and thorough manner, complying with all applicable deadlines. All reports must be submitted typewritten using Microsoft Word/Adobe Acrobat and must be electronically transmitted to the Project Manager; * Communicate information from the fabrication facility regarding upcoming assignments and potential work that Bureau Veritas could perform; and * Maintain a positive relationship between Bureau Veritas, the fabrication facility, and the client * Ability to work remotely from the established Bureau Veritas offices; * Client oriented approach with emphasis on understanding and fulfilling the needs of the client; * Detail oriented with a dedication to the quality control and quality assurance process; ability to understand and read complex design and fabrication plans and specifications; * Excellent communication and documentation skills, with ability to communicate technical issues to the Project Manager, clients, and the fabrication facility. Expertise in Microsoft Office (Word, Excel) required; knowledge of Adobe Acrobat and Lotus Notes preferred. Proficient use of modern communication and computer equipment including cell phones, laptop computers and digital cameras; * Ability to multi-task and properly execute multiple simultaneous assignments without sacrificing efficiency or quality of the work; * Team player willing to work with clients, field staff, other Bureau Veritas offices, and the world wide Bureau Veritas organization MINIMUM QUALIFICATIONS REQUIRED: * Certified Welding Inspector (American Welding Society) * D1.5 Bridge Inspection Experience a plus * NDT Level II a plus * AMPP/NACE Level II a plus At Bureau Veritas, we are dedicated to ensuring our employees receive fair and competitive pay, accompanied by comprehensive health and wellness benefits. Here's a breakdown of what we provide: Hourly Rate: $35-$55 Specific Location: Claremont, NH Pay offered may vary depending on job-related knowledge, skills, experience. Additional Benefits: Retirement, Paid Time Off, and up to 4 hours of annual volunteer time off. This information is transparently provided in adherence to several state and local Equal Pay and Pay Transparency Laws. Join us at Bureau Veritas, where your well-being and professional growth are our top priorities. #IND6

The inspector is responsible for oversight of the fabrication facility's quality assurance on behalf of Bureau Veritas's client, in addition to on-site inspections during the construction phase. The inspector must have significant knowledge of the American welding Society (AWS) codes and demonstrable experience in a similar position. The skills required for this position include: * Communicating with the Project Manager to determine the specific requirements of a given work order, including the scope of work, deliverables, schedule, and budget for a particular assignment; * Communication with the Project Manager, fabrication shops, contractors, and other third parties to resolve schedule issues; * Ensure that the services provided are performed in accordance with the project requirements and contract with the client; * Generate and process timesheets, billing reports, and inspection reports in an expeditious and thorough manner, complying with all applicable deadlines. All reports must be submitted typewritten using Microsoft Word/Adobe Acrobat and must be electronically transmitted to the Project Manager; * Communicate information from the fabrication facility regarding upcoming assignments and potential work that Bureau Veritas could perform; and * Maintain a positive relationship between Bureau Veritas, the fabrication facility, and the client * Ability to work remotely from the established Bureau Veritas offices; * Client oriented approach with emphasis on understanding and fulfilling the needs of the client; * Detail oriented with a dedication to the quality control and quality assurance process; ability to understand and read complex design and fabrication plans and specifications; * Excellent communication and documentation skills, with ability to communicate technical issues to the Project Manager, clients, and the fabrication facility. Expertise in Microsoft Office (Word, Excel) required; knowledge of Adobe Acrobat and Lotus Notes preferred. Proficient use of modern communication and computer equipment including cell phones, laptop computers and digital cameras; * Ability to multi-task and properly execute multiple simultaneous assignments without sacrificing efficiency or quality of the work; * Team player willing to work with clients, field staff, other Bureau Veritas offices, and the world wide Bureau Veritas organization MINIMUM QUALIFICATIONS REQUIRED: * Certified Welding Inspector (American Welding Society) * NDT Level II a plus * AMPP/NACE Level II a plus At Bureau Veritas, we are dedicated to ensuring our employees receive fair and competitive pay, accompanied by comprehensive health and wellness benefits. Here's a breakdown of what we provide: Hourly Rate: $$35-$45 Specific Location: St. Cloud, MN Pay offered may vary depending on job-related knowledge, skills, experience. Additional Benefits: Retirement, This information is transparently provided in adherence to several state and local Equal Pay and Pay Transparency Laws. Join us at Bureau Veritas, where your well-being and professional growth are our top priorities. #IND6

The inspector is responsible for oversight of the fabrication facility's quality assurance on behalf of Bureau Veritas's client, in addition to on-site inspections during the construction phase. The inspector must have significant knowledge of the American welding Society (AWS) codes and demonstrable experience in a similar position. The skills required for this position include: * Communicating with the Project Manager to determine the specific requirements of a given work order, including the scope of work, deliverables, schedule, and budget for a particular assignment; * Communication with the Project Manager, fabrication shops, contractors, and other third parties to resolve schedule issues; * Ensure that the services provided are performed in accordance with the project requirements and contract with the client; * Generate and process timesheets, billing reports, and inspection reports in an expeditious and thorough manner, complying with all applicable deadlines. All reports must be submitted typewritten using Microsoft Word/Adobe Acrobat and must be electronically transmitted to the Project Manager; * Communicate information from the fabrication facility regarding upcoming assignments and potential work that Bureau Veritas could perform; and * Maintain a positive relationship between Bureau Veritas, the fabrication facility, and the client * Ability to work remotely from the established Bureau Veritas offices; * Client oriented approach with emphasis on understanding and fulfilling the needs of the client; * Detail oriented with a dedication to the quality control and quality assurance process; ability to understand and read complex design and fabrication plans and specifications; * Excellent communication and documentation skills, with ability to communicate technical issues to the Project Manager, clients, and the fabrication facility. Expertise in Microsoft Office (Word, Excel) required; knowledge of Adobe Acrobat and Lotus Notes preferred. Proficient use of modern communication and computer equipment including cell phones, laptop computers and digital cameras; * Ability to multi-task and properly execute multiple simultaneous assignments without sacrificing efficiency or quality of the work; * Team player willing to work with clients, field staff, other Bureau Veritas offices, and the world wide Bureau Veritas organization MINIMUM QUALIFICATIONS REQUIRED: * Certified Welding Inspector (American Welding Society) * D1.5 Bridge Inspection Experience a plus * NDT Level II a plus * AMPP/NACE Level II a plus At Bureau Veritas, we are dedicated to ensuring our employees receive fair and competitive pay, accompanied by comprehensive health and wellness benefits. Here's a breakdown of what we provide: Hourly Rate: $35-$55 Specific Location: Albany, NY Pay offered may vary depending on job-related knowledge, skills, experience. Additional Benefits: Retirement, Paid Time Off, and up to 4 hours of annual volunteer time off. This information is transparently provided in adherence to several state and local Equal Pay and Pay Transparency Laws. Join us at Bureau Veritas, where your well-being and professional growth are our top priorities. #IND6

The inspector is responsible for oversight of the fabrication facility's quality assurance on behalf of Bureau Veritas's client. The client's for these assignments are typically state Departments of Transportation or construction contractors. The inspector must have significant knowledge of Precast/Pre-Stressed Concrete and demonstrable experience in a similar position. The skills required for this position include: * Communicating with the Project Manager to determine the specific requirements of a given work order, including the scope of work, deliverables, schedule, and budget for a particular assignment; * Communication with the Project Manager, fabrication shops, contractors, and other third parties to resolve schedule issues; * Ensure that the services provided are performed in accordance with the project requirements and contract with the client; * Generate and process timesheets, billing reports, and inspection reports in an expeditious and thorough manner, complying with all applicable deadlines. All reports must be submitted typewritten using Microsoft Word/Adobe Acrobat and must be electronically transmitted to the Project Manager; * Communicate information from the fabrication facility regarding upcoming assignments and potential work that Bureau Veritas could perform; and * Maintain a positive relationship between Bureau Veritas, the fabrication facility, and the client * Ability to work remotely from the established Bureau Veritas offices; * Client oriented approach with emphasis on understanding and fulfilling the needs of the client; * Detail oriented with a dedication to the quality control and quality assurance process; ability to understand and read complex design and fabrication plans and specifications; • Excellent communication and documentation skills, with ability to communicate technical issues to the Project Manager, clients, and the fabrication facility. Expertise in Microsoft Office (Word, Excel) required; knowledge of Adobe Acrobat and Lotus Notes preferred. Proficient use of modern communication and computer equipment including cell phones, laptop computers and digital cameras; * Ability to multi-task and properly execute multiple simultaneous assignments without sacrificing efficiency or quality of the work; * Team player willing to work with clients, field staff, other Bureau Veritas offices, and the world wide Bureau Veritas organization JOB REQUIREMENTS: * Certified Welding Inspector (American Welding Society) required * NDT Level 2 UT-Shearwave & MT Required * HS Diploma or GED At Bureau Veritas, we are dedicated to ensuring our employees receive fair and competitive pay, accompanied by comprehensive health and wellness benefits. Here's a breakdown of what we provide: Hourly Rate: $35-$45 Annual Incentive Bonus Plan Pay offered may vary depending on job-related knowledge, skills, experience, and market location. Our Health and Welfare Benefits are designed to meet your needs, eligible on your first day of employment: Medical, Dental, and Vision coverage Company-matched Retirement plan Generous Paid Time Off and Company Holidays Life Insurance and AD&D coverage Short-Term Disability (STD) and Long-Term Disability (LTD) Optional life and pet insurance EAP and Total Wellbeing Lifestyle Programs Tuition Assistance and/or Professional Development Employee Discounts This information is transparently provided in adherence to several state and local Equal Pay and Pay Transparency Laws. Join us at Bureau Veritas, where your well-being and professional growth are our top priorities. #IND6

The inspector is responsible for oversight of the fabrication facility's quality assurance on behalf of Bureau Veritas's client, in addition to on-site inspections during the construction phase. The inspector must have significant knowledge of the American welding Society (AWS) codes and demonstrable experience in a similar position. The skills required for this position include: * Communicating with the Project Manager to determine the specific requirements of a given work order, including the scope of work, deliverables, schedule, and budget for a particular assignment; * Communication with the Project Manager, fabrication shops, contractors, and other third parties to resolve schedule issues; * Ensure that the services provided are performed in accordance with the project requirements and contract with the client; * Generate and process timesheets, billing reports, and inspection reports in an expeditious and thorough manner, complying with all applicable deadlines. All reports must be submitted typewritten using Microsoft Word/Adobe Acrobat and must be electronically transmitted to the Project Manager; * Communicate information from the fabrication facility regarding upcoming assignments and potential work that Bureau Veritas could perform; and * Maintain a positive relationship between Bureau Veritas, the fabrication facility, and the client * Ability to work remotely from the established Bureau Veritas offices; * Client oriented approach with emphasis on understanding and fulfilling the needs of the client; * Detail oriented with a dedication to the quality control and quality assurance process; ability to understand and read complex design and fabrication plans and specifications; * Excellent communication and documentation skills, with ability to communicate technical issues to the Project Manager, clients, and the fabrication facility. Expertise in Microsoft Office (Word, Excel) required; knowledge of Adobe Acrobat and Lotus Notes preferred. Proficient use of modern communication and computer equipment including cell phones, laptop computers and digital cameras; * Ability to multi-task and properly execute multiple simultaneous assignments without sacrificing efficiency or quality of the work; * Team player willing to work with clients, field staff, other Bureau Veritas offices, and the world wide Bureau Veritas organization MINIMUM QUALIFICATIONS REQUIRED: * Certified Welding Inspector (American Welding Society) * D1.5 Bridge Inspection Experience a plus * NDT Level II a plus * AMPP/NACE Level II a plus At Bureau Veritas, we are dedicated to ensuring our employees receive fair and competitive pay, accompanied by comprehensive health and wellness benefits. Here's a breakdown of what we provide: Hourly Rate: $35-$55 Specific Location: Southern, NJ Pay offered may vary depending on job-related knowledge, skills, experience. Additional Benefits: Retirement, Paid Time Off, and up to 4 hours of annual volunteer time off. This information is transparently provided in adherence to several state and local Equal Pay and Pay Transparency Laws. Join us at Bureau Veritas, where your well-being and professional growth are our top priorities. #IND6

* Certified Welding InspectorThe inspector is responsible for quality assurance on behalf of Bureau Veritas's client, in addition to on- site inspections during the construction phase. The ideal candidate must demonstrable experience in a similar position.Requirements:• Communicating with the Project Managers to determine the specific requirements of a given work order, including the scope of work, deliverables, schedule, and budget for a particular assignment * Communication with the Project Managers, fabrication shops, contractors, BV employees, and other third parties to resolve issues * Reliable High Speed Internet connection * Valid Driver's license, and a clean driving record * Ability to successfully pass a background check and drug screen * Ensure that the services provided are performed in accordance with the project requirements and contract with the client * Fiscal ability to pay travel expenses for 1-2 weeks in advance. Travel expenses may include, but not limited to: lodging, meals, flights, rental cars, parking, tolls, public transportation, etc. * Generate, process, and/or respond to the following (included, but not limited to): timesheets, billing reports, expense reports, emails, instant messages, and inspection reports in an expeditious/thorough manner, complying with all applicable deadlines. All reports must be submitted typewritten using Microsoft Word/Adobe Acrobat and must be electronically transmitted to the Project Manager * Communicate information from the fabrication facility regarding upcoming assignments and potential work that Bureau Veritas could perform * Maintain a positive relationship between Bureau Veritas, the fabrication facility, and the client * Ability to work remotely, on-site, and or from established Bureau Veritas offices/work sites * Client oriented approach with emphasis on understanding and fulfilling the needs of the client; * Detail oriented with a dedication to the quality control and quality assurance process; ability to understand and read complex design and fabrication plans and specifications; * Excellent communication and documentation skills, with ability to communicate technical issues to the Project Manager, clients, BV Employees, and the fabrication facilities. * - * -

The inspector is responsible for quality assurance on behalf of Bureau Veritas's client, in addition to on- site inspections during the construction phase. The ideal candidate must demonstrable experience in a similar position. Requirements: * Communicating with the Project Managers to determine the specific requirements of a given work order, including the scope of work, deliverables, schedule, and budget for a particular assignment * Communication with the Project Managers, fabrication shops, contractors, BV employees, and other third parties to resolve issues * Reliable High Speed Internet connection * Valid Driver's license, and a clean driving record * Ability to successfully pass a background check and drug screen * Ensure that the services provided are performed in accordance with the project requirements and contract with the client * Fiscal ability to pay travel expenses for 1-2 weeks in advance. Travel expenses may include, but not limited to: lodging, meals, flights, rental cars, parking, tolls, public transportation, etc. * Generate, process, and/or respond to the following (included, but not limited to): timesheets, billing reports, expense reports, emails, instant messages, and inspection reports in an expeditious/thorough manner, complying with all applicable deadlines. All reports must be submitted typewritten using Microsoft Word/Adobe Acrobat and must be electronically transmitted to the Project Manager * Communicate information from the fabrication facility regarding upcoming assignments and potential work that Bureau Veritas could perform * Maintain a positive relationship between Bureau Veritas, the fabrication facility, and the client * Ability to work remotely, on-site, and or from established Bureau Veritas offices/work sites * Client oriented approach with emphasis on understanding and fulfilling the needs of the client; * Detail oriented with a dedication to the quality control and quality assurance process; ability to understand and read complex design and fabrication plans and specifications; * Excellent communication and documentation skills, with ability to communicate technical issues to the Project Manager, clients, BV Employees, and the fabrication facilities. * Proficiency with Desktop Computers/Laptops/Tablets and Microsoft Office Applications (including, but not limited to: Outlook, MS Teams, Word, Excel, and MS Calendar) required; along with knowledge of Adobe Acrobat and other word processing/document control software as needed * Ability to multi-task and properly execute multiple simultaneous assignments without sacrificing efficiency or quality of the work; * Team player willing to work with clients, field staff, other Bureau Veritas offices, and the world wide Bureau Veritas organization * Use of PPE: Ability to identify situations where additional PPE (outside of standard issue) is required. * Use of a camera (smartphone) and ability to insert photos into a document for client reports Physical Requirements: * Must be able to remain in a stationary position for long periods of time. * The person in this position needs to occasionally move about inside the work space to access required areas * Constantly operates a computer and other productivity equipment, and/or machinery. Included, but not limited to: smartphone, tablet, calculator, copy machine, and computer printer, etc. * Frequently ascends/descends a ladder, and/or stairs to access required workspace * Constantly positions self to access elevated or lowered work spaces * The ability to communicate information and ideas so others will understand. Must be able to exchange accurate information in these situations. * The ability to observe details at close range (within a few feet of the observer or at a distance) Credentials * Current AWS CWI Certification Required * NDT Level II - UT, PT, MT Required * UT Shearwave or Phased Array UT are a plus. At Bureau Veritas, we are dedicated to ensuring our employees receive fair and competitive pay, accompanied by comprehensive health and wellness benefits. Here's a breakdown of what we provide: Hourly Rate: $35-$45 Specific Location: Phoenix, AZ Pay offered may vary depending on job-related knowledge, skills, experience. Additional Benefits: Retirement, This information is transparently provided in adherence to several state and local Equal Pay and Pay Transparency Laws. Join us at Bureau Veritas, where your well-being and professional growth are our top priorities. #IND6

The inspector is responsible for oversight of the fabrication facility's quality assurance on behalf of Bureau Veritas's client, in addition to on-site inspections during the construction phase. The inspector must have significant knowledge of the American welding Society (AWS) codes and demonstrable experience in a similar position. The skills required for this position include: * Communicating with the Project Manager to determine the specific requirements of a given work order, including the scope of work, deliverables, schedule, and budget for a particular assignment; * Communication with the Project Manager, fabrication shops, contractors, and other third parties to resolve schedule issues; * Ensure that the services provided are performed in accordance with the project requirements and contract with the client; * Generate and process timesheets, billing reports, and inspection reports in an expeditious and thorough manner, complying with all applicable deadlines. All reports must be submitted typewritten using Microsoft Word/Adobe Acrobat and must be electronically transmitted to the Project Manager; * Communicate information from the fabrication facility regarding upcoming assignments and potential work that Bureau Veritas could perform; and * Maintain a positive relationship between Bureau Veritas, the fabrication facility, and the client * Ability to work remotely from the established Bureau Veritas offices; * Client oriented approach with emphasis on understanding and fulfilling the needs of the client; * Detail oriented with a dedication to the quality control and quality assurance process; ability to understand and read complex design and fabrication plans and specifications; * Excellent communication and documentation skills, with ability to communicate technical issues to the Project Manager, clients, and the fabrication facility. Expertise in Microsoft Office (Word, Excel) required; knowledge of Adobe Acrobat and Lotus Notes preferred. Proficient use of modern communication and computer equipment including cell phones, laptop computers and digital cameras; * Ability to multi-task and properly execute multiple simultaneous assignments without sacrificing efficiency or quality of the work; * Team player willing to work with clients, field staff, other Bureau Veritas offices, and the world wide Bureau Veritas organization MINIMUM QUALIFICATIONS REQUIRED: * Certified Welding Inspector (American Welding Society) * D1.5 Bridge Inspection a plus * NDT Level II a plus * AMPP/NACE Level II a plus At Bureau Veritas, we are dedicated to ensuring our employees receive fair and competitive pay, accompanied by comprehensive health and wellness benefits. Here's a breakdown of what we provide: Hourly Rate: $35-$45 Specific Location: Olean, NY Pay offered may vary depending on job-related knowledge, skills, experience. Additional Benefits: Retirement, Paid Time Off, and up to 4 hours of annual volunteer time off. This information is transparently provided in adherence to several state and local Equal Pay and Pay Transparency Laws. Join us at Bureau Veritas, where your well-being and professional growth are our top priorities. #IND6

UTLX As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. POSITION SUMMARY: The Quality Control Inspector is responsible for performing in-process and final inspection on railcars parts or components, to ensure that qualification and inspections at our facility are complete and compliant with applicable regulations, codes, AAR Interchange/MSRP's, Marmon Rail standards/procedures, and other customer requirements. The inspector has full authority and is required to identify nonconforming conditions, generate nonconformance reporting and hold or stop work on parts and components pending resolution. Primary responsibilities and/or essential functions include, but are not limited to: Performs visual, dimensional, and/or mechanical inspection of railcar parts and components throughout all stages of the manufacturing process. Assures all identified nonconforming conditions are identified by reports, forms, checklist and/or the nonconformance reporting system. Maintains an up-to-date inspection record of all inspections performed on each part or component as jobs move through the facility. Reviews shop floor documentation to ensure completeness and compliance. Works with production to identify and plan for the day's shipments to ensure verifications/inspections are made in a timely manner. Reports adverse and/or non-compliant items to the supervisor responsible and QA Manager and follows-up to confirm that remedies have been put in place on items before the car is released to subsequent processes/stages. Participates in and actively supports quality projects, activities and Responsible Care initiatives to ensure that the Company achieves its goals. SKILLS/SPECIFICATIONS: Ability to communicate technical information verbally and written. Basic computer skills needed. General mechanical aptitude and ability to use dimensional inspection tools, weld inspection gages, testing techniques and test equipment necessary for inspections. Ability to climb ladders, bend, crawl, squat, kneel, and stretch to perform inspections. Have keen visual and audio acuity to recognize various shop danger/warning signals to avoid injuries and promote a safe work environment. Possess ability to spend most of their time on their feet and constantly moving throughout the day. Be willing and able to wear safety equipment, such as safety shoes, safety glasses, hard hats, earplugs, and respirators. Have vision correctable to 20/20 for inspection activities. Ability to operate forklifts Ability to read and understand standard operating procedures, code specifications, and blue prints. The incumbent works to meet internal and external customer expectations at all times by fully applying oneself to the task involved, preventing errors, and developing and implementing personal quality improvement projects. In addition, the incumbent is required to understand the Responsible Care Management System and actively participate in activities outlined therein. EDUCATION/EXPERIENCE/QUALIFICATIONS: High School diploma or equivalent required. DISCLAIMER: Please note the duties listed are not set forth for purposes of limiting the assignment of work. They are not to be construed as a complete list of the many duties normally to be performed under a job title or those to be performed temporarily outside an employee's normal line of work. Duties, and activities may change at any time with or without notice. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Job Description Senior Field Inspector Working with our business partners to create, improve and sustain industry and infrastructure. Orbital Engineering has been driven by this core purpose for more than 55 years - energizing Orbital team members and helping our clients solve challenging and complex problems with innovative engineering, inspection, and construction solutions. Orbital team members are guided by the fundamental beliefs of building trusted relationships, personal accountability, innovation, and excellence in everything we do. Orbital is looking for others to join our team to continue activating our purpose and embrace our values. Orbital Engineering, Inc. is seeking an experienced Senior Field Inspector local to Pennsylvania, Ohio, Michigan, Virginia, or North Carolina. This position will require traveling to local client sites as well as occasional out of state travel when needed - up to 80%. Travel will mainly be up and down the east coast. Orbital's Asset Integrity Services ensures client structures and equipment remain compliant and reliable. Reporting to the Atlantic Region Department Manager, this role involves conducting field inspections, collecting data, preparing technical reports, and other duties. The ideal candidate has hands-on experience in heavy industrial settings such as steel mills, petrochemical, chemical, mining, materials processing, or power generation. Candidates must be prepared to readily accept these requirements and will be properly trained to work in these environments. The ideal candidate will be a high-performing, critical-thinking, analytical, and experienced self-starter with excellent leadership skills, written and oral communication skills, customer service skills, and the ability to establish and maintain cooperative and effective working relationships with others. Orbital culture values safety, communication, accountability, professionalism, integrity, and respect. PRIMARY ESSENTIAL DUTIES AND RESPONSIBILITIES Detect possible defects and faults in structural and mechanical systems in the field and recommend or stipulate appropriate remedial measures for noncomplex defects. Generates accurate inspection reports in Orbital's inspection software platform efficiently within project budgets. Ensure all operational and project related activities are completed in accordance with Orbital's Project Management System (OPMS). Accurately read and comprehend drawings. Learn job-related material primarily through oral instruction and observation which takes place mainly in an on-the-job training setting. Use graphic instructions, such as blueprints, schematic drawings, layouts, or other visual aids. Applies intensive and diversified knowledge in broad areas of assignments, especially projects concerned with unique or specialized problems. Rely on experience and judgment to plan and accomplish goals. Complete company developed training modules. Interfaces directly with the client's representatives, as necessary. Proficient with a computer and/or tablet use in office & field. This position will require travel to client sites in other states. Work safely while performing field and office tasks. EXPERIENCE 2-10 years of appropriate inspection experience with a safe performance record. Personnel with experience in shop welding and fabrication or quality inspection in other fields is a plus. EDUCATION High school diploma or equivalent required. Technical degree preferred. Recent civil/structural engineering graduates interested in practical field experience under a professional engineer to help bolster their growth are encouraged to apply. PHYSICAL DEMANDS The physical demands of this job must be met for an employee to successfully perform the essential functions of this job. While performing this job, employees are regularly to sit, walk, stand, bend, and climb ladders & use arms and hands. Employees must have good sight, including color vision, depth perception, and ability to adjust focus & the ability to talk and hear. Employees may occasionally be required to lift up to 50 pounds. Reasonable accommodations may be made to enable individuals to perform the essential job functions. WORK ENVIORNMENT While performing the duties of this job, employees may be exposed to moving mechanical parts, extreme cold, and extreme heat. Noise levels are usually moderate. Reasonable accommodations may be made to enable individuals to perform essential job functions. MINIMUM REQUIREMENTS High school diploma or equivalent required. Demonstrated ability to effectively organize multiple assignments, complex assignments, and competing priorities to produce quality reports and results. Computer proficiency including general office products, design, and business enterprise software. Reasoning skills and ability to solve practical problems. Ability to read and understand engineering and fabrication drawings. Ability to travel to our client facilities. Ability to perform field inspections at higher elevations and confined spaces. Must have dependable transportation and a valid driver's license and insurance. Must be able to pass a fit-for-duty test. Experience with any of the following: welding, site QAQC, inspection, concrete, steel, and bolting testing. This position requires the ability to pass a post-offer drug (including marijuana) and alcohol test in compliance with Federal regulations and is also subject to random testing as a condition of continued employment. PREFERRED QUALIFICATIONS Technical degree preferred. Part 107 Pilot License Non-Destructive Testing (NDT) experience. Certified Welding Inspector (CWI). American Petroleum Inspector (API) - 510, 570 or 653. AMPP coating inspector. Experience in shop welding and fabrication or quality inspection in other fields. TWIC Card holder. OSHA 10hr or 30hr MSHA Part 46 or 48 Preference given to individuals with exposure to heavy industrial environments and marketplaces. Orbital Engineering, Inc. has provided worldwide professional engineering and consulting services since 1969. Our commitment to quality, responsiveness, and attention to detail has earned us the reputation as a leading provider of engineering and design services. A commitment to excellence and hard work will be rewarded with a competitive salary, career advancement opportunities, and an excellent benefits package including medical, dental, vision, prescription drug, 401(k), and supplemental insurance. Orbital Engineering, Inc. is an Equal Opportunity Employer, EEO/AA/M-F-V-D. Orbital Engineering, Inc. seeks diversity among its employees. Reasonable accommodations may be made to enable individuals to perform the essential job functions.

Working with our business partners to create, improve and sustain industry and infrastructure. Orbital Engineering has been driven by this core purpose for more than 55 years - energizing Orbital team members and helping our clients solve challenging and complex problems with innovative engineering, inspection, and construction solutions. Orbital team members are guided by the fundamental beliefs of building trusted relationships, personal accountability, innovation, and excellence in everything we do. Orbital is looking for others to join our team to continue activating our purpose and embrace our values. Orbital Engineering, Inc. is seeking an experienced Senior Field Inspector local to Pennsylvania, Ohio, Michigan, Virginia, or North Carolina. This position will require traveling to local client sites as well as occasional out of state travel when needed - up to 80%. Travel will mainly be up and down the east coast. Orbital's Asset Integrity Services ensures client structures and equipment remain compliant and reliable. Reporting to the Atlantic Region Department Manager, this role involves conducting field inspections, collecting data, preparing technical reports, and other duties. The ideal candidate has hands-on experience in heavy industrial settings such as steel mills, petrochemical, chemical, mining, materials processing, or power generation. Candidates must be prepared to readily accept these requirements and will be properly trained to work in these environments. The ideal candidate will be a high-performing, critical-thinking, analytical, and experienced self-starter with excellent leadership skills, written and oral communication skills, customer service skills, and the ability to establish and maintain cooperative and effective working relationships with others. Orbital culture values safety, communication, accountability, professionalism, integrity, and respect. PRIMARY ESSENTIAL DUTIES AND RESPONSIBILITIES * Detect possible defects and faults in structural and mechanical systems in the field and recommend or stipulate appropriate remedial measures for noncomplex defects. * Generates accurate inspection reports in Orbital's inspection software platform efficiently within project budgets. * Ensure all operational and project related activities are completed in accordance with Orbital's Project Management System (OPMS). * Accurately read and comprehend drawings. * Learn job-related material primarily through oral instruction and observation which takes place mainly in an on-the-job training setting. * Use graphic instructions, such as blueprints, schematic drawings, layouts, or other visual aids. * Applies intensive and diversified knowledge in broad areas of assignments, especially projects concerned with unique or specialized problems. * Rely on experience and judgment to plan and accomplish goals. * Complete company developed training modules. * Interfaces directly with the client's representatives, as necessary. * Proficient with a computer and/or tablet use in office & field. * This position will require travel to client sites in other states. * Work safely while performing field and office tasks. EXPERIENCE * 2-10 years of appropriate inspection experience with a safe performance record. * Personnel with experience in shop welding and fabrication or quality inspection in other fields is a plus. EDUCATION * High school diploma or equivalent required. * Technical degree preferred. * Recent civil/structural engineering graduates interested in practical field experience under a professional engineer to help bolster their growth are encouraged to apply. PHYSICAL DEMANDS * The physical demands of this job must be met for an employee to successfully perform the essential functions of this job. * While performing this job, employees are regularly to sit, walk, stand, bend, and climb ladders & use arms and hands. * Employees must have good sight, including color vision, depth perception, and ability to adjust focus & the ability to talk and hear. * Employees may occasionally be required to lift up to 50 pounds. * Reasonable accommodations may be made to enable individuals to perform the essential job functions. WORK ENVIORNMENT * While performing the duties of this job, employees may be exposed to moving mechanical parts, extreme cold, and extreme heat. * Noise levels are usually moderate. * Reasonable accommodations may be made to enable individuals to perform essential job functions. MINIMUM REQUIREMENTS * High school diploma or equivalent required. * Demonstrated ability to effectively organize multiple assignments, complex assignments, and competing priorities to produce quality reports and results. * Computer proficiency including general office products, design, and business enterprise software. * Reasoning skills and ability to solve practical problems. * Ability to read and understand engineering and fabrication drawings. * Ability to travel to our client facilities. * Ability to perform field inspections at higher elevations and confined spaces. * Must have dependable transportation and a valid driver's license and insurance. * Must be able to pass a fit-for-duty test. * Experience with any of the following: welding, site QAQC, inspection, concrete, steel, and bolting testing. * This position requires the ability to pass a post-offer drug (including marijuana) and alcohol test in compliance with Federal regulations and is also subject to random testing as a condition of continued employment. PREFERRED QUALIFICATIONS * Technical degree preferred. * Part 107 Pilot License * Non-Destructive Testing (NDT) experience. * Certified Welding Inspector (CWI). * American Petroleum Inspector (API) - 510, 570 or 653. * AMPP coating inspector. * Experience in shop welding and fabrication or quality inspection in other fields. * TWIC Card holder. * OSHA 10hr or 30hr * MSHA Part 46 or 48 * Preference given to individuals with exposure to heavy industrial environments and marketplaces. Orbital Engineering, Inc. has provided worldwide professional engineering and consulting services since 1969. Our commitment to quality, responsiveness, and attention to detail has earned us the reputation as a leading provider of engineering and design services. A commitment to excellence and hard work will be rewarded with a competitive salary, career advancement opportunities, and an excellent benefits package including medical, dental, vision, prescription drug, 401(k), and supplemental insurance. Orbital Engineering, Inc. is an Equal Opportunity Employer, EEO/AA/M-F-V-D. Orbital Engineering, Inc. seeks diversity among its employees. Reasonable accommodations may be made to enable individuals to perform the essential job functions.

Job DescriptionMMR Constructors, Inc. is accepting resumes for Electrical Quality Control Inspectors throughout our sites around the United States with industrial construction experience. Are you willing to travel? Do you have at least 8-10 years industrial and/or commercial electrical constructor experience? Do you have E&I quality experience? Company Culture: At MMR, our most valuable assets are not our buildings or equipment, it is our family of employees with diverse backgrounds and experiences. Our investment in training programs and resources allows our employees to reach both their personal and professional goals. This is evident with MMR receiving numerous awards including “Best Place to Work” and consistently being recognized as one of the top Engineering News Record's “Annual Specialty Contractors.” All of which can be further explained on our website (***************************** by watching the provided videos. Organization Description: MMR has served as the industry leader in instrumentation and electrical construction, maintenance, and technical services for over 30 years. Our diverse list of clients allows us the unique ability to work across industry lines in the oil and gas upstream and midstream as well as chemical and petrochemical downstream, industrial manufacturing, power generation, renewable energy, mission critical, heavy commercial, and energy storage sectors. MMR holds the proud distinction of being the largest privately owned “Open Shop” contractor in the United States with over 30 branch offices including global locations in Canada, Qatar, and South America. For more information, please visit our website: *************** Duties and Responsibilities of Electrical Quality Control Inspectors (included but not limited to): Administration of the Quality Management System (QMS) outlined in the MMR PQP Organizational freedom to recognize quality problems and to provide solutions to the problems Perform the various periodic project jobsite audits as required Review provided drawings, specifications, approved RFI's and submittals, etc. for quality requirements Conduct and record all MMR quality inspection and testing activities on the appropriate Inspection and Test Report's as required Coordinate ITP audit, hold, monitor, and witness points with client, owner, engineer, etc. PRIOR TO any inspection and /or testing activities Perform periodic project jobsite audits, surveillances, along with other MMR supporting quality documentation as required Gather records for quality Turnover Package submission Attend required and refresher training related to company, vendor, and regulatory compliance Attend safety training as directed Must comply with all safety and company rules and regulations Managing and overseeing QC Inspectors Qualifications/Experience/Skills: Experience in industrial and heavy construction Ability to work independently, prioritize, organize, problem solve, and exercise good judgement with minimal supervision Ability to coordinate a variety of project simultaneously Ability to demonstrate flexibility and creativity Strong organizational and interpersonal skills are required Able to work effectively under time pressure and/or deadline Excellent verbal and written communication skills Willingness to work flexible, varied hours, including evenings and weekends as needed Regular and reliable attendance at work MMR offers a competitive benefits package including health, dental, vision, 401(k), 401(k) matching and numerous other voluntary benefits. MMR Group, Inc. and its affiliated companies ("MMR") is an Equal Opportunity Employer and does not discriminate on the basis of race, color, national origin, religion, sex, age, veteran status, genetic information or any other legally protected class. Powered by JazzHR K1rlVrl0Me

MMR Constructors, Inc. is accepting resumes for Electrical Quality Control Inspectors throughout our sites around the United States with industrial construction experience. Are you willing to travel? Do you have at least 8-10 years industrial and/or commercial electrical constructor experience? Do you have E&I quality experience? Company Culture: At MMR, our most valuable assets are not our buildings or equipment, it is our family of employees with diverse backgrounds and experiences. Our investment in training programs and resources allows our employees to reach both their personal and professional goals. This is evident with MMR receiving numerous awards including “Best Place to Work” and consistently being recognized as one of the top Engineering News Record's “Annual Specialty Contractors.” All of which can be further explained on our website (***************************** by watching the provided videos. Organization Description: MMR has served as the industry leader in instrumentation and electrical construction, maintenance, and technical services for over 30 years. Our diverse list of clients allows us the unique ability to work across industry lines in the oil and gas upstream and midstream as well as chemical and petrochemical downstream, industrial manufacturing, power generation, renewable energy, mission critical, heavy commercial, and energy storage sectors. MMR holds the proud distinction of being the largest privately owned “Open Shop” contractor in the United States with over 30 branch offices including global locations in Canada, Qatar, and South America. For more information, please visit our website: *************** Duties and Responsibilities of Electrical Quality Control Inspectors (included but not limited to): Administration of the Quality Management System (QMS) outlined in the MMR PQP Organizational freedom to recognize quality problems and to provide solutions to the problems Perform the various periodic project jobsite audits as required Review provided drawings, specifications, approved RFI's and submittals, etc. for quality requirements Conduct and record all MMR quality inspection and testing activities on the appropriate Inspection and Test Report's as required Coordinate ITP audit, hold, monitor, and witness points with client, owner, engineer, etc. PRIOR TO any inspection and /or testing activities Perform periodic project jobsite audits, surveillances, along with other MMR supporting quality documentation as required Gather records for quality Turnover Package submission Attend required and refresher training related to company, vendor, and regulatory compliance Attend safety training as directed Must comply with all safety and company rules and regulations Managing and overseeing QC Inspectors Qualifications/Experience/Skills: Experience in industrial and heavy construction Ability to work independently, prioritize, organize, problem solve, and exercise good judgement with minimal supervision Ability to coordinate a variety of project simultaneously Ability to demonstrate flexibility and creativity Strong organizational and interpersonal skills are required Able to work effectively under time pressure and/or deadline Excellent verbal and written communication skills Willingness to work flexible, varied hours, including evenings and weekends as needed Regular and reliable attendance at work MMR offers a competitive benefits package including health, dental, vision, 401(k), 401(k) matching and numerous other voluntary benefits. MMR Group, Inc. and its affiliated companies ("MMR") is an Equal Opportunity Employer and does not discriminate on the basis of race, color, national origin, religion, sex, age, veteran status, genetic information or any other legally protected class.

Working with our business partners to create, improve and sustain industry and infrastructure. Orbital Engineering has been driven by this core purpose for more than 50 years - energizing Orbital team members and helping our clients solve challenging and complex problems with innovative engineering, inspection, and construction solutions. Orbital team members are guided by the fundamental beliefs of building trusted relationships, personal accountability, innovation, and excellence in everything we do. Orbital is looking for others to join our team to continue activating our purpose and embrace our values. Orbital is currently seeking experienced API Inspector (653/510/570) to provide inspection services to our customers throughout the Atlantic Region. A successful candidate should have five or more years of appropriate inspection background with experience in an oil refinery. This position will require travel to client sites. Ideal candidates should live local to Pennsylvania, Ohio, Michigan, Indiana, or West Virginia. The ideal candidate will be a high performing, critical thinking, analytical, and experienced self-starter with excellent leadership skills, written and oral communication skills, customer service skills, and the ability to establish and maintain cooperative and effective working relationships with others. Orbital culture values safety, communication, accountability, professionalism, integrity, and respect. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience Guideline: Five of more years of appropriate inspection experience. Supervision: Ability to supervise field technicians/inspection personnel in accordance with company rules and policies and in compliance with applicable labor requirements. Minimum Requirements: * API certification required * OSHA 10- or 30-hour certification required * TWIC card required * Aerial lift training and certification preferred * Confined space trained and competent, preferred * Must be familiar with reading and redlining P&ID's and ISO drawings * Must be able to communicate technical requirements and deliverables clearly and concisely. * Provide timely feedback of inspection resumes to the site personnel * Must be able to collaborate with others and work effectively without much supervision. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to walk. The employee is occasionally required to stand. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include color vision, depth perception, and ability to adjust focus. Working at heights (aerial lifts, crane basket or from scaffolding) or in tight, confined space type areas would be required to complete field inspection work. Use of negative pressure, air filtering/purifying respiratory protection may be required. Work Environment: Orbital is a Drug Free workplace and is not tolerated. In addition to the physical demands stated above, the work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, extreme cold, and extreme heat. The noise level in the work environment is usually moderate. Orbital Engineering, Inc. has provided worldwide professional engineering and consulting services since 1969. Our commitment to quality, responsiveness, and attention to detail has earned us the reputation as a leading provider of engineering and design services. A commitment to excellence and hard work will be rewarded with a competitive salary, career advancement opportunities, and an excellent benefits package including medical, dental, vision, prescription drug, 401(k), and supplemental insurance. Orbital Engineering, Inc. is an Equal Opportunity Employer, EEO/AA/M-F-V-D. Orbital Engineering, Inc. seeks diversity among its employees. Reasonable accommodations may be made to enable individuals to perform the essential job functions.

About the Organization RENK America is a leading supplier in the defense, marine and industry sector with superior mobility, propulsion and drive train solutions. Our tradition is centered on precision-engineered systems for maximum impact, efficiency and endurance. RENK's ambition is to support each and every one of its customers to exceed standards in harsh conditions and combat situations. RENK America employs over 500 employees at our US locations in Muskegon, Michigan, Cincinnati, Ohio, Camby, Indiana and Roseville, Michigan. RENK America is driven by this sense of pride and purpose in our country and our community. Description **Responsibilities:** + Use precision measuring instruments to very close tolerance requirements. + Use and interpret precision measuring instruments + Work from written procedures, complex drawings and blueprints, sketches, operations sheets, specifications and instructions to plan work operations + Monitor quality of own work to assure adherence to quality standards and prepare detailed inspection reports as required, document non-conformances. + Determine and report any inefficiencies, defective materials, unusual conditions and machining issues + Keep required time and maintain productions records. + Responsible for the safety and clean-up of own area + Adhere to all safety guidelines and procedures Position Requirements **Requirements:** + High School diploma or equivalent required + Prefer 3-5 years' experience in a similar capacity + Must be able to use standard inspection equipment, ID or OD mics, dial bore gages, digital or dial calipers, thread gages, etc. + Read and interpret technical drawings and blueprints + Knowledge of CMM inspections, Magnetic Particle inspections and knowledge of SPC a plus. + Good math, language, reading skills + Analytical skills + Attention to detail + Visual Acuity + Some lifting of various weights, both assisted and unassisted + Shop environment, exposed to shop elements + May work in tight and/or cramped spaces + Walking, standing, lifting, stooping, reaching + Some lifting of various weights, both assisted and unassisted + Strong attention to detail and accuracy + Teamwork and communication skills + Must be authorized to work in the US Full-Time/Part-Time Full-Time Exempt/Non-Exempt Non-Exempt EOE Statement RENK America is proud to be an Affirmative Action/Equal Opportunity Employer. RENK America is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. RENK America maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. This position is currently accepting applications.

Responsibilities: Use precision measuring instruments to very close tolerance requirements. Use and interpret precision measuring instruments Work from written procedures, complex drawings and blueprints, sketches, operations sheets, specifications and instructions to plan work operations Monitor quality of own work to assure adherence to quality standards and prepare detailed inspection reports as required, document non-conformances. Determine and report any inefficiencies, defective materials, unusual conditions and machining issues Keep required time and maintain productions records. Responsible for the safety and clean-up of own area Adhere to all safety guidelines and procedures

Overview Under general supervision, applies skills and knowledge to determine degree of conformance of materials, equipment and installation of materials and equipment to the company or Client specifications. Performs inspection of various project activities; generates reports of conditions found during inspection activities; Notifies management of significant problems; Completes documentation to attest to satisfactory completion of inspection or test activities. Responsibilities Essential Job Functions: Promote and comply with all Company safety policies and procedures Inspect and ensure the quality of work performed during the daily activities of the overall construction on large scale wind, solar, and industrial projects. Included but not limited to; roads, environmental (SWPPP), excavations, concrete, rebar, substations, transmission lines, solar racking and PV installation, underground utilities, wind turbine installation, steel erection, welding, piping, valves, pumps, compressors and a wide variety of other mechanical and electrical equipment Demonstrates good organizational, planning and time management skills Must plan and conduct daily activities in a highly organized manner to ensure all QC and QA data are properly and accurately recorded On a daily basis monitor and record all work scope being executed and follow reporting criteria as determined by FQM and/or the client, as needed. Prevents deficiencies while working closely with field operating teams, through pre-construction quality control inspections Detects deficiencies and addressed deficiencies in a timely and effective manner Work closely with the field quality staff acting as their field representative ensuring construction understands and follows the QA/QC requirements Interface with field supervision to maintain an open line of communication and reporting monitor job progress, schedules and subcontractor performance Maintain complete and accurate records during inspections so they can be transferred to permanent hard copy and/or electronic files Inspect the work and establish punch lists Capable of determining calibration status of measuring and test equipment Ensures daily task schedules are met to meet the project schedule Interacts cross-functionally with craft personnel and other team members Other duties as assigned Qualifications Requirements Education and Work Experience Requirements: Associates degree in Engineering Technology, Construction Management or related field Or High School Graduate or equivalent plus 1-3 years' experience in related construction field Inspection related certifications (i.e., NDE) preferred Knowledge, Skills and Abilities Required: Take reasonable care of your own and others' health and safety and of those who may be affected by the day-to-day delivery of this role by taking personal responsibility for working toward the company's Zero Injury principles Ability to independently perform work Self-starter, organized and have good interpersonal skills Read, analyze and interpret blueprints and technical procedures Write daily reports and document project activities Effectively collect and record field data to assure activities are conforming to corporate Quality Control procedures Ability to calculate figures and amounts such as area, circumference and volume Ability to apply concepts of basic algebra and geometry Ability to solve problems individually and in a team setting Working Environment: Regularly exposed to outside weather conditions Frequently exposed to moving mechanical parts; high, precarious places; and extreme heat Occasionally exposed to fumes or airborne particles and vibration Noise level in the work environment is usually loud What's in it for you Financial Wellbeing Compensation: $19.00-$22.00/hourly, commensurate with experience Competitive pay with ongoing performance review and merit increase 401(k) with company match & Employee Stock Purchase Plan (ESPP) Flexible spending account (Healthcare & Dependent care) Health & Wellness Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children Diabetes Management, Telehealth Coverage, Prescription Drug Plan MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, religion, national origin, age, disability, genetic information, military status or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ***********************. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at ***************************** MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-DC1 #LI-Onsite Requirements Education and Work Experience Requirements: Associates degree in Engineering Technology, Construction Management or related field Or High School Graduate or equivalent plus 1-3 years' experience in related construction field Inspection related certifications (i.e., NDE) preferred Knowledge, Skills and Abilities Required: Take reasonable care of your own and others' health and safety and of those who may be affected by the day-to-day delivery of this role by taking personal responsibility for working toward the company's Zero Injury principles Ability to independently perform work Self-starter, organized and have good interpersonal skills Read, analyze and interpret blueprints and technical procedures Write daily reports and document project activities Effectively collect and record field data to assure activities are conforming to corporate Quality Control procedures Ability to calculate figures and amounts such as area, circumference and volume Ability to apply concepts of basic algebra and geometry Ability to solve problems individually and in a team setting Working Environment: Regularly exposed to outside weather conditions Frequently exposed to moving mechanical parts; high, precarious places; and extreme heat Occasionally exposed to fumes or airborne particles and vibration Noise level in the work environment is usually loud What's in it for you Financial Wellbeing Compensation: $19.00-$22.00/hourly, commensurate with experience Competitive pay with ongoing performance review and merit increase 401(k) with company match & Employee Stock Purchase Plan (ESPP) Flexible spending account (Healthcare & Dependent care) Health & Wellness Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children Diabetes Management, Telehealth Coverage, Prescription Drug Plan MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, religion, national origin, age, disability, genetic information, military status or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ***********************. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at ***************************** MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-DC1 #LI-Onsite Essential Job Functions: Promote and comply with all Company safety policies and procedures Inspect and ensure the quality of work performed during the daily activities of the overall construction on large scale wind, solar, and industrial projects. Included but not limited to; roads, environmental (SWPPP), excavations, concrete, rebar, substations, transmission lines, solar racking and PV installation, underground utilities, wind turbine installation, steel erection, welding, piping, valves, pumps, compressors and a wide variety of other mechanical and electrical equipment Demonstrates good organizational, planning and time management skills Must plan and conduct daily activities in a highly organized manner to ensure all QC and QA data are properly and accurately recorded On a daily basis monitor and record all work scope being executed and follow reporting criteria as determined by FQM and/or the client, as needed. Prevents deficiencies while working closely with field operating teams, through pre-construction quality control inspections Detects deficiencies and addressed deficiencies in a timely and effective manner Work closely with the field quality staff acting as their field representative ensuring construction understands and follows the QA/QC requirements Interface with field supervision to maintain an open line of communication and reporting monitor job progress, schedules and subcontractor performance Maintain complete and accurate records during inspections so they can be transferred to permanent hard copy and/or electronic files Inspect the work and establish punch lists Capable of determining calibration status of measuring and test equipment Ensures daily task schedules are met to meet the project schedule Interacts cross-functionally with craft personnel and other team members Other duties as assigned

Under general supervision, applies skills and knowledge to determine degree of conformance of materials, equipment and installation of materials and equipment to the company or Client specifications. Performs inspection of various project activities; generates reports of conditions found during inspection activities; Notifies management of significant problems; Completes documentation to attest to satisfactory completion of inspection or test activities. Responsibilities Essential Job Functions: Promote and comply with all Company safety policies and procedures Inspect and ensure the quality of work performed during the daily activities of the overall construction on large scale wind, solar, and industrial projects. Included but not limited to; roads, environmental (SWPPP), excavations, concrete, rebar, substations, transmission lines, solar racking and PV installation, underground utilities, wind turbine installation, steel erection, welding, piping, valves, pumps, compressors and a wide variety of other mechanical and electrical equipment Demonstrates good organizational, planning and time management skills Must plan and conduct daily activities in a highly organized manner to ensure all QC and QA data are properly and accurately recorded On a daily basis monitor and record all work scope being executed and follow reporting criteria as determined by FQM and/or the client, as needed. Prevents deficiencies while working closely with field operating teams, through pre-construction quality control inspections Detects deficiencies and addressed deficiencies in a timely and effective manner Work closely with the field quality staff acting as their field representative ensuring construction understands and follows the QA/QC requirements Interface with field supervision to maintain an open line of communication and reporting monitor job progress, schedules and subcontractor performance Maintain complete and accurate records during inspections so they can be transferred to permanent hard copy and/or electronic files Inspect the work and establish punch lists Capable of determining calibration status of measuring and test equipment Ensures daily task schedules are met to meet the project schedule Interacts cross-functionally with craft personnel and other team members Other duties as assigned Qualifications Requirements Education and Work Experience Requirements: Associates degree in Engineering Technology, Construction Management or related field Or High School Graduate or equivalent plus 1-3 years' experience in related construction field Inspection related certifications (i.e., NDE) preferred Knowledge, Skills and Abilities Required: Take reasonable care of your own and others' health and safety and of those who may be affected by the day-to-day delivery of this role by taking personal responsibility for working toward the company's Zero Injury principles Ability to independently perform work Self-starter, organized and have good interpersonal skills Read, analyze and interpret blueprints and technical procedures Write daily reports and document project activities Effectively collect and record field data to assure activities are conforming to corporate Quality Control procedures Ability to calculate figures and amounts such as area, circumference and volume Ability to apply concepts of basic algebra and geometry Ability to solve problems individually and in a team setting Working Environment: Regularly exposed to outside weather conditions Frequently exposed to moving mechanical parts; high, precarious places; and extreme heat Occasionally exposed to fumes or airborne particles and vibration Noise level in the work environment is usually loud What's in it for you Financial Wellbeing Compensation: $19.00-$22.00/hourly, commensurate with experience Competitive pay with ongoing performance review and merit increase 401(k) with company match & Employee Stock Purchase Plan (ESPP) Flexible spending account (Healthcare & Dependent care) Health & Wellness Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children Diabetes Management, Telehealth Coverage, Prescription Drug Plan MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, religion, national origin, age, disability, genetic information, military status or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ***********************. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at **************************** . MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-DC1 #LI-Onsite Service Line (UKG) : Name IMS-IEA Management Services

The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. SUMMARY: The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. The QC inspector will have knowledge of galvanizing quality, on-grip process, and quality, as well as acceptable manufacturing standards. The QC inspector will be required to know and implement the NAAMM standards. Quality Control Inspector in assigned Business Units. Work with all levels of the organization including, the Business Unit Manager, Supervisors, and Associates to create a smooth, defect-free process. Sample production from every station to significantly reduce/eliminate escapes from your assigned Business Unit. Approve and/or perform first-article inspections on a job requiring this level of oversight. Assure all associates are trained/certified (if required) to operate to perform the tasks they are being asked to perform. Assist in the training, development, and/or creation of proper training materials as required. Perform any required QCHECKs in the Business Unit. The measurement of effectiveness will be a reduction of IRRs in the Inspector's assigned Business Unit and no escapes from the Inspector's assigned Business Unit to other areas. Inspect output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality. Using gauges such as tape measure, calipers, and micrometers to measure products and assure Quality is built into the product. Reviewing blueprints and specifications to compare to produced goods. Check that the production line adheres to standards and procedures and complies with the Customer standards. Ask the Question: "Is there an SOP for this Process". Record inspection results by recording job numbers of inspected parts, summarizing issues and actions taken to keep production running with no significant pauses in the process. Use iAuditor to record the jobs inspected. Significant reworks, re-makes, and wastes will be input to the IRR System as needed. Helping train the production team on quality control measures to improve product excellence. Assist Associates in Transaction Control (Epicor). Help Associates attain defect-free entries. Monitor transactions to verify that the Associates are performing the task as required. Propose improvements to the production process. Assisting in the development of test methods and inspection plans. Help determine the causes of product defects and reworks. During product inspections, verify all equipment is calibrated correctly. Monitor the scrap hoppers three times during your shift and advise of any abnormalities. When needed, assist in the Sales Order Deviation Process. Always review issues immediately with the Business Unit Manager, Supervisors, and Quality Manager. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/RESPONSIBILITIES: Read travelers to ensure quantity, grating type, material type, finish, and any special quality notes are accurate. Inspect the quality of grating for all specified jobs. Reject any product that is not within specifications. Work with Production to repair the product if possible. Document non-conformance and report/return to the business unit or origin. Implement NAAMM standards. Support correction as needed. Knowledge of IRR process. Evaluate internal processes and suggest ideas for improvement. Update IRR process documents as changes occur. Review sales order packets using the five-point checklist application. Back up Quality Assurance as needed. Performs other related duties as assigned. EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES: Requires a high school diploma or equivalent is required. The candidate must have strong computer skills in Microsoft Office Suite (Word, Excel, and Outlook). In addition, one or more years of experience with a manufacturing facility. The candidate must have excellent reasoning skills, be detail-oriented, accurate and complete assignments on time with little supervision. Must take initiative and be a self-starter. Must have knowledge of galvanizing quality, on-grip process, and quality as well as acceptable manufacturing standards. Experience with ERP systems and knowledge of internal processes and procedures is preferred. EEO STATEMENT: Ohio Gratings, Inc. is an equal opportunity employer and affords equal opportunity to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.