Eastern Metal Supply jobs in Fort Myers, FL - 90614 jobs

This position is responsible for ensuring the production of safe, high-quality food products in compliance with regulatory, customer, and company standards. This role leads the facility's food safety and quality programs, oversees compliance with HACCP, FSMA, and GFSI requirements, and provides leadership to QA and sanitation teams to maintain continuous improvement in quality systems and plant hygiene. Essential Functions Quality Assurance & Compliance Manage and maintain the plant's Quality Management System (QMS) to meet internal, customer, and third-party audit requirements. Oversee daily QA operations including product testing, process verification, and documentation review. Lead and coordinate internal, customer, and regulatory audits (FDA, USDA, State, GFSI). Investigate non-conformances, implement root cause analysis, and ensure timely corrective and preventive actions (CAPAs). Ensure compliance with labeling, allergen control, and traceability requirements. Maintain accurate and complete quality and production records in compliance with regulatory standards. Food Safety & HACCP Serve as the plant's PCQI (Preventive Controls Qualified Individual). Oversee implementation, verification, and validation of food safety programs including HACCP, FSMA Preventive Controls, environmental monitoring, and supplier verification. Lead the Food Safety Team and ensure effective communication of food safety objectives across departments. Monitor trends in microbiological results, environmental swabs, and product testing to proactively identify risks. Leadership & Training Develop and deliver employee training on GMPs, food safety, allergen control, sanitation, and quality awareness. Promote a culture of food safety and continuous improvement throughout the facility. Collaborate cross-functionally with Production, Maintenance, and Sanitation teams to ensure alignment with quality objectives. Continuous Improvement Analyze process data to identify opportunities for quality improvement and waste reduction. Support implementation of initiatives related to product quality and safety. Recommend and validate changes to formulations, processes, or equipment to improve quality performance. Competencies Page Break Problem Solving/Analysis Works independently Dependable Strong Communication Skills Teamwork Innovative Computer Skills Time Management/Initiative Attentive to detail Trainable Page Break Supervisory Responsibility This position will have direct supervisory responsibility for a portion of the Quality Assurance team. Work Environment This job operates in a plant environment and office. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands for this position are approximately 60% active and 40% sedentary work. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently will need to sit, stand, walk and climb stairs. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position. Typical schedule is Monday through Friday with occasional evening and weekend work possible based on specific project needs. Travel Less than ten percent travel expected for this position. Required Education, Experience & Certifications Bachelor's degree in related field and/or a minimum of 10 years' experience in food manufacturing quality assurance and/or sanitation leadership. Knowledge of food safety regulations including HACCP, GMP, FSMA and SQF. Strong leadership and team management experience. Ability to conduct audits, troubleshoot quality issues and implement improvements. Preferred Education, Experience & Certifications Master's degree in food science. Bilingual in English/Spanish. Preventive Controls Qualified Individual certification. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. Monday - Friday; night or weekends as needed for projects 8:00 am - 5:00 pm

Unload Trucks locate carpet in the bins Load carpet and pallets in a timely manner Relocate rolls from bins to other bins to keep the warehouse user friendly Work with shipping clerk to load trucks in the proper order Maintain a clean and safe work environment and equipment Operate Lift truck following safety guidelines Communicate with the lead or supervisor throughout the day Assist with cycle counts and inventory accuracy Communicate with Lead or Supervisor any damaged product Assist with cycle-counts and inventory accuracy Performs other duties as assigned by management Works with minimal level of supervision QUALIFICATIONS/ SKILLS High School diploma or equivalent Excellent attendance is required Forklift experience required Strong math and communication skills Requirements Lifting: 50 pounds maximum lifted. Lowest point - Ground Level, Highest point - 4 1⁄2 feet. Frequency: Frequent. Object lifted: LVT Carton.

The mission of the Maintenance Manager is to manage maintenance functions for a facility. Areas included are building utility systems, equipment maintenance and building and grounds maintenance. Ensures that maintenance department objectives are met including project, cost, quality and safety factors. RESPONSIBILITIES OF THIS POSITION: Leads the Maintenance team to ensure efficient and effective support for Production and the facility, including: -Support in training of Maintenance personnel. -Assists and guides Maintenance personnel as needed. -Is responsible for the safety and good housekeeping work habits of all Maintenance personnel. -Assigns priorities and work to Maintenance personnel. -Participates in Maintenance personnel evaluations. -Order supplies according to business needs within limits. -Oversees and coordinates Maintenance projects. Ensures that maintenance department objectives are met including project, cost, quality and safety factors. Responsible for developing and maintaining PM program for the company. Is on call to come to work during off shift hours to help in emergency situations. Attend and participate in training opportunities and seminars relevant to this position. Foster a of continuous improvement environment with clearly defined objectives and plans. Provide continued support to meet the objectives. Responsible for the annual EPA reporting and corresponding regular system checks. Support in Capital requests as needed. Makes sure that all work is performed according to Local, State and Federal Government rules and regulations. Ensures that outside contractors perform as specified on the contracts and follow all Habasit rules and regulations. Areas included, but are not limited to, are building utility systems, equipment maintenance and building and grounds maintenance. Any other duties as assigned. COMPETENCIES/SPECIFIC EXPERIENCE OR TRAINING PREFERRED: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements/preferences listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required - Bachelors Degree in Engineering or Related Field Required - Five years experience in manufacturing/production/assembly environments Required - Competency with Process Improvement/Lean concepts Required - High Competency with MS Word, Excel, PowerPoint, CRM Applications Preferred - Electricians, Plumbing, Welding Licenses

SUMMARY Combination - Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS - Work within precise limits or standards of accuracy. - Make decisions based on measurable criteria. - Apply basic mathematics to solve problems. - Plan work and select proper tools. - Visualize objects in three dimensions from plans and drawings. - Compare and see differences in the size, shape and form of lines, figures and objects. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 50% Walking 20% Sitting 30% b. Lifting 35 lb. Carrying 35 lb. Pushing 0 ft-lb. Pulling 0 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

Bimbo QSR Ohio, Transportation TRANSPORTATION DISPATCH AND OPERATIONS SUPPORT To provide end-to-end Transportation Operations support for the successful execution of the replenishment distribution process of Direct Store Deliveries (DSD), Warehouse (WHSE), and Outside Orders. To provide Dispatch functions in support of the Transportation Manager and provide operational coverage of Bimbo QSR Ohio (BQOH) and Third-Party Logistics (3PL) activities throughout the entire Bimbo QSR US (BQUS) enterprise. Assist in the execution of growth plans, driver training, and equipment requirements in order to reduce costs and improve efficiency. Assist the Customer Service Supervisor in the day-to-day execution of the Customer Service roles and responsibilities. Assist the Transportation Safety Manager in administration and compliance objectives. Assist in providing process coverage to the Transportation Department during extended operating hours. ll. Duties and Responsibilities: Provide Fleet and Driver Dispatching functions. Review, monitor, and ensure proper utilization of Driver and Fleet resources. Assist in the planning, processing, and tracking of the Dispatch process for all DSD and WHSE runs. Coordinate with the Shipping Department and Production to optimize requirements. Assist/execute border crossing documentation/shipment information for military base shipments. Assist in Customer Service functions of freezer monitoring, service, and conditions. Assist in Customer Service functions of store concerns and contacts. Provide support to the Transportation Safety Manager in the administration of DOT compliance, regulations, and training. Provide operational coverage for the Transportation Department during extended operating hours. III. Minimum Qualifications: Education and/or Experience equivalent to: Associate's degree or equivalent; and/or experience similar to the above Duties and Responsibilities. Ability to operate in a dynamic environment in the absence of direct supervision. Experience: Two or more years of progressive experience in Transportation/Dispatch operations Desired experience in the use/application of DOT regulations Proven experience in Logistics and Distribution operations. Knowledge/Qualifications and Skills: Must have excellent customer service skills/verbal and written communication skills. Good English communication skills (both written and oral). Communicate and coordinate effectively with internal and external stakeholders and support organizations verbally and in writing. Proficient with Microsoft Office including Word, Excel, PowerPoint, Outlook, etc. Demonstrate a willingness to learn improved skills. Must possess the highest possible standard of ethics and conduct. Demonstrate good organizational, multi-tasking, and time management skills, able to meet deadlines. Take initiative and be self-motivated, always looking for opportunities to improve. IV. Physical Requirements: Must be able to sit, stand, walk, bend, stoop, push and pull objects up to 25 lbs. Must be able to work in varying and dynamic schedules to meet operational demand and have the ability to meet flexible schedules from time to time.

BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are pd of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Director of Parts Logistics and Operations, Customer Support (the "Director") is a high-visibility, high-impact leadership role. The Director is responsible for overseeing and optimizing the parts logistics operations to ensure the efficient procurement, storage, distribution, and management of parts and components within the organization. This role involves coordinating with suppliers, managing inventory, and leading a team to ensure the timely availability of parts while maintaining cost-effectiveness and high-quality standards. Reporting to the Vice President and General Manager of the Customer Support division for North America, the Director works in a globally matrixed organization overseeing critical regional functions/deliverables across our business segments. The Director also leads Spare Parts Specialists who own the customer relationship from a spare parts perspective and proactively engage customers to increase spare parts sales. The role reports to the Vice President and General Manager of Customer Support. Key Responsibilities: Develop and implement logistics strategies for the procurement, storage, and distribution of parts and components. Oversee the coordination of suppliers and vendors to ensure timely delivery of parts and adherence to quality standards. Oversee the transportation and distribution of parts to various locations, including warehouses and end-users. Manage inventory levels to ensure optimal stock levels are maintained, reducing both excess inventory and stockouts. Implement inventory control procedures and best practices to minimize loss and maximize accuracy. Conduct regular inventory audits and reconciliation. Oversee warehouse operations as part of overall logistics and operational responsibilities. Lead and mentor a team of logistics and warehouse staff, providing training and support to ensure efficient and effective operations. Develop and implement performance metrics and goals for team members, conducting regular performance reviews. Identify and implement process improvements to enhance efficiency, reduce costs, and improve service levels. Utilize data analysis to monitor logistics performance, identify trends, and make data-driven decisions. Ensure compliance with safety regulations and company policies. Establish and maintain strong relationships with suppliers and vendors to negotiate favorable terms and resolve issues. Monitor supplier performance/quality, addressing any issues related to delivery, quality, or cost. Develop and manage the budget for parts logistics operations, including forecasting and controlling expenses. Analyze financial reports and metrics to ensure budget adherence and cost-effectiveness. Ensure timely and accurate fulfilment of parts orders to meet customer requirements and expectations. Address and resolve any issues related to parts delivery, quality, or discrepancies. Ensure compliance with all relevant regulations and industry standards, including safety, environmental, and quality regulations. Prepare and present regular reports on logistics performance, inventory levels, and other key metrics to senior management. Customer-facing spare parts ownership and sales growth Lead and manage Spare Parts Specialists who own customer relationships for spare parts and drive proactive engagement to increase spare parts sales. Establish a customer coverage model and engagement cadence for Spare Parts Specialists (account plans, installed-base reviews, critical spares recommendations, and obsolescence risk mitigation). Set targets and performance expectations for Spare Parts Specialists (sales goals, activity metrics, pipeline discipline). Inspect performance routinely and coach to outcomes. Partner with Service Operations and Sales to align parts growth plans, commercial strategy, and customer messaging. Compensation range: $135,000.00 - $145,000.00 Annually The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications 10-15+ years in supply chain, logistics, operations, or aftermarket support 5-7+ years in senior leadership managing global or multi-site operations End-to-end spare parts lifecycle management (forecasting, procurement, warehousing, distribution) Commitment to customer satisfaction Optimization of fill rate, inventory turns, service levels, and obsolescenc Reverse logistics, repairs, refurbishment, and warranty returns New product introduction (NPI) readiness for service and spares Proven experience with spare parts planning & distribution, aftermarket / customer support operations, service-level agreement (SLA) management. Ability to lead and develop current team Experience with budget ownership Strong decision-making under pressure Customer-centric mindset with operational rigor Ability to balance cost, speed, and service quality Commercial leadership for spares Experience leading customer-facing teams with accountability for spare parts sales growth. Ability to build and execute proactive spare parts growth plans across a defined customer base. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents. 401(k) with Generous Match: Secure your financial future with our competitive retirement plan. Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too! Ancillary Insurances: Including vision, accident, and critical illness insurance. Generous Paid Time Off: Achieve the optimal work-life balance. Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most! Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential. BEUMER is an equal opportunity employer and affords equal opportunity to all applicants and employees for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status or any other status protected under local, state or federal laws.

The Floating Operator is assigned to work on a variety of tasks throughout the Reflective plant including but not limited to Material Handling, R1, R2, Finishing, Metalizer, Inks and Shipping/Receiving as the primary responsibility. The Floating Operator will support the team in providing flexibility across all areas of the operation to meet production and customer demand. The Floating Operator will provide support to the team in ensuring successful equipment/processes through flexibility, engagement, and collaboration with the operations team. The Floating Operator must provide the flexibility needed and is critical and expected. This is a Continuous operation role on the off shift (2-2-3 schedule) 6:45 AM to 7:00 PM Primary Job Duties and Responsibilities: Essential functions may include, but are not limited to: * Support material handling, R1, R2, Finishing, Metalizer, Inks and Shipping as the primary responsibility, which include (but are not limited to) training/learning the equipment and operating the line * Float on a daily basis to fill vacant positions across the plant to ensure operation is able to run at scheduled capacity. * Serve as a trainer for other employees in the department. * Perform all other duties as assigned by Supervisor * Perform all duties associated with the OTM III roles within the departments stated above: * Load raw material into the machine and unload the product. * Determine and control the machine cycle varying and modifying as necessary. * Perform tests and check product routinely for multiple characteristics using standard measuring devices and making some judgments against not readily measurable standards. * Meet production schedules and program production sequences for optimal productivity. * Follow standard operating procedures and specifications or instructions and guidelines to ensure adherence to production/process specifications. * Report any malfunctions or abnormalities and make minor adjustments and repairs to equipment. * Maintain production records and logs of equipment and product performance. * Follow all health, safety, and housekeeping procedures, policies and practices and consistently work in a safe manner with regard to self, co-workers, and manufacturing systems. * Attend, participate, log and track all required training. * Understand and implement the quality standard procedures that relate to the role and responsibilities of each work cell & department. * Perform general housekeeping tasks and waste removal within the department/group and assists other areas as required. * Continuously review current processes and search out improvement methods to improve product/process quality and reduce waste, rework, and unnecessary work that adds no value to the work or process. * Support safety, quality, and continuous improvement initiatives. * Teamwork: Assist and support other team members in meeting department and site goals. Participate and share in performing all tasks necessary to run the facility. Contribute and participate in team decision making. Provide support in project work and other special requests. * Perform all other functions as necessary. Minimum Requirements: * High School Diploma or equivalent (GED) or 3+ years of relevant manufacturing work experience. * Must be able to follow written and oral instructions. * Must regard safety as a core value; must serve as a role model for other employees and encourage adherence to safety practices, policies and procedures. * Must have strong service and quality focus; address issues effectively when problems arise and take initiative to understand the root cause, then communicate / educate the team in a timely manner. * Must be able to actively contribute in a team based, collaborative environment; encourage open communication and positive interaction with peers and management to effectively reach a common goal. * Must demonstrate proficiency in essential tasks of the job and a willingness to learn and share knowledge; must take initiative to cross-train and sustain acquired skills. * Must complete OJT signoff sheets for each department * Must have demonstrated record of flexibility and dependability in order to support production and customer focus. * Must be able and willing to work overtime, including short-notice requests. * Must demonstrate proficiency with computer applications, especially strong MFG Pro transactional skills. * Previous forklift experience and certification, preferred All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations.

American Furniture Rental (AFR) is looking a for a Full-time experienced Truck Driver & Furniture Mover for our location in Kissimmee, FL PLEASE APPLY ONLY IF YOU HAVE EXPERIENCE DRIVING A 26-FEET BOX TRUCK. DOT card need it or able to obtain the card prior hiring. Must meet FMCSA qualifications requirements -English Language Proficiency Under 49 CFR 391.11 Have a well complete written - formatted resume Clean background and driving records. Able to pass DOT Physical test, which includes but is not limited to pre-employment Drug Testing (12 panels). This is a Full time job with excellent benefits (medical, dental, vision, life Insurance), plus pay vacation, PTO, 401K and more. GENERAL DESCRIPTION: The Driver/Installer will be responsible for completing the assigned routes for deliveries and pick-up of merchandise to be distributed among our clients. Will also be responsible for the proper installation according to the floor plan provided. Assist with shipping and receiving responsibilities providing support to the warehouse department. This job description is applicable to residential, commercial, special events and trade show Driver/Installer. RESPONSIBILITIES: Operate company vehicles in a professional and courteous manner while observing all the safety rules according to DOT traffic laws and regulations. Performs daily maintenance checks (DOT pre-trip and post-trip inspections) to the company vehicles assigned and report any malfunctions to management for the proper action and maintenance. Responsible for the Delivery, Installation and Pickup of merchandise from our warehouses, vendors and to our customers in a timely manner with attention to detail. Fill delivery orders by obtaining the required merchandise and completing appropriate paperwork. Protect all products and items by utilizing materials such as furniture pads, coverups, and other protection materials supplied by AFR. Responsible for reading, comprehending, and completing all paperwork associated with the delivery to be completed and ensure the delivery of appropriate merchandise in accordance with customer invoices, delivery/pickup paperwork. Responsible to maintain the tool kit provided by AFR in good condition and notify if needs any replacement. Confirm with client that all items delivered are in good condition and make sure that client signed the delivery document. Driver/Installers are required to inspect the facility they are delivering or picking up items and notating any damage found to the premises by taking a picture and notify their manager, prior to installation or pickup of furniture. Upon picking up furniture, confirm that all items are in good condition and notify the manager of any damage or missing items. If there is a damaged item, the Driver/Installer must take a picture of the item and send it to the Manager prior to loading it onto the truck. Ensure customer messages and communications are relayed to appropriate management. Assist in always maintaining a neat and clean workplace. Assist with stocking the shipping and receiving department to include lifting and carrying cartons and placing them on appropriate shelves. Receive a floorplan and instruct and execute the delivery with other helpers. The Driver/Installer must wear the uniform provided by AFR at all times during work hours. Perform other related duties as assigned and required by management. ADDITIONAL SKILLS/REQUIREMENTS: Organization and time management skills. Verbal and written communication skills. Customer service and problem solving oriented. Available to work rotating shifts, over time, holidays, and weekends. Ability to use basic tools such as screwdriver, cordless drills, hammers, or any other assembly tool. Basic math knowledge, organization and reading skills. EDUCATION: Degree: High School or Equivalent Languages: English and Spanish languages preferable; verbal and written. EXPERIENCE: At least six months of experience in a similar industry, warehousing and inventory knowledge from a delivery company or similar industry. Required to be able to operate a 26' box truck. CERTIFICATIONS/LICENSES: Valid Driver's license - must meet the insurance underwriting requirements (no points of violations in the past twelve months). Able to pass DOT Physical test, which includes but is not limited to pre-employment Drug Testing. Background check is required. PHYSICAL AND MENTAL QUALIFICATIONS: This job will require lifting 75 pounds, climbing stairs, bending, crouching, and being physically active for extended periods of time. The Driver/Installer will adhere and comply with DOT regulations. Diversity ensures the success of our careers, and our lives. AMERICAN FURNITURE RENTAL, INC. is an EEO/Affirmative Action Employer and does not discriminate on the basis of age, race, color, religion, gender, sexual orientation, gender identity, gender expression, national origin, protected veteran status, disability or any other legally protected status.

Dutchland, LLC designs, manufactures and constructs precast, post-tensioned concrete tanks for water, wastewater and renewable energy applications. Our team is growing and we're seeking a structural engineer (all experience levels, Spring 2026 grads welcome to apply). This is a great opportunity to make a difference in the water and wastewater industry. Position Responsibilities: Perform structural analysis and design of precast, post-tensioned concrete tanks in compliance with appropriate design codes and Dutchland standard practices Oversee the preparation of Erection and Production drawings for precast, post-tensioned concrete tanks Coordinate with the Project Management, Production and Construction departments to produce and install tanks within established budgets and schedules Contribute to efforts within the Engineering Department to continuously improve quality and efficiency of structural designs Contribute to efforts in the Engineering and Drafting Department to continuously improve efficiency of workflow Travel to job sites to inspect the work, as needed Perform stripping and handling calculations for precast concrete panels Interpret Contract Documents for environmental engineering tank projects Diligently work to obtain proficiency in analysis and design of all types of tanks produced by Dutchland Qualifications: B.S. in Civil Engineering, or equivalent Engineer-in-Training certificate PE license is a plus, but not required Reinforced concrete design Prior precast concrete and/or concrete tank design experience is desirable, but not required Foundation design Experience with 3D CAD modeling software desired, but not a requirement Technical writing Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people in the classification and are not intended to be construed as an exhaustive list of all job responsibilities, duties, and skills required of personnel so classified.

A leading power infrastructure provider is seeking a Groundman in Raleigh, NC. This role involves assisting in the construction and maintenance of overhead electrical distribution systems while ensuring safety. The ideal candidate is team-oriented, self-motivated, and able to perform rigorous physical labor. The position requires effective communication skills and the ability to lift over 50 lbs. Working conditions can be challenging, including exposure to diverse weather and the possibility of overtime as needed. #J-18808-Ljbffr

A nationally recognized, member-driven supply chain and purchasing organization is seeking a Director, Purchasing to lead strategic sourcing, supplier negotiations, and category management across critical food and packaging products. This organization supports a large, multi-site restaurant network and operates at significant national scale. This role is responsible for driving cost optimization, ensuring continuity of supply, strengthening supplier partnerships, and leading a team of purchasing professionals in a complex, high-volume environment. Key Responsibilities Lead strategic sourcing and supplier negotiations across assigned product categories Develop supply strategies to optimize cost, quality, and distribution efficiency Build and manage supplier relationships and evaluate sourcing options Lead, mentor, and develop Purchasing Managers and team members Analyze market trends, cost drivers, and supply risks to inform purchasing strategies Partner cross-functionally with supply chain, operations, and stakeholders on key initiatives Drive continuous improvement in purchasing processes, tools, and performance metrics Qualifications & Experience 8+ years of progressive experience in purchasing, sourcing, or supply chain leadership Experience negotiating complex supplier agreements and managing national or multi-site supply chains Background in food service, CPG, manufacturing, distribution, or consumer products preferred Proven people leadership experience Strong commercial, analytical, and strategic capabilities Bachelor's degree required Interested in learning more? Apply or reach out to explore this opportunity further.

A leading marine industry firm is seeking a part-time Dock Master to greet members and manage dock activities in Sarasota, Florida. Responsibilities include guest services, managing check-in processes, and maintaining vessels. The ideal candidate is customer-focused, has strong communication skills, and can work independently. This role offers an hourly pay of $14 and includes opportunities for growth and valuable benefits, making it a great option for those interested in marine recreation. #J-18808-Ljbffr

Since 1907, ParkOhio Holdings Corp. (NASDAQ: PKOH) and their subsidiaries have provided the strategic services and products that allow the world's leading manufacturers to streamline their manufacturing processes and focus their core competencies on production of more efficient and high-quality products. ParkOhio is an industrial supply chain logistics and diversified manufacturing business operating approximately 125 manufacturing, distribution and service facilities and employing approximately 7000 people worldwide. Revenues are in excess of $1.6 billion with a customer base consisting of many of the Global 2000 infrastructure and business/personal/household products companies. ParkOhio operates through three reportable segments: Supply Technologies, Engineered Products and Assembly components. For more information: **************** The Engineered Products Group (EPG) is a diverse group of manufacturing businesses designing and manufacturing a broad range of highly engineered products. These products include induction heating and melting systems, tube & pipe threading and bending systems, forge and forming presses, and forged and machined components. The Industrial Engineered Group (IEG) is a sub-segment of the Engineered Products Group that focuses on the induction heating and melting business through global brands like Ajax TOCCO Magnethermic, GH, Lectrotherm, SAET, Pillar. IEG designs and manufactures world-class equipment for the foundry, heat treating, bar & tube (OCTG & API), steel processing, strip heating, forging & forming, and vacuum induction melting industries. The induction business also provides various services, including laboratory process development, preventative maintenance, equipment repair and parts, coil repair facilities, and installation services. Additionally, the IEG group includes pipe bending and threading with global brands like Colinet and PMC. The entire group is made up of more than 30 sites globally and is approximately $325M in annual sales. These companies are in a sub-segment of the Engineered Product Group, one of the three reportable segments of ParkOhio. Position Summary: The Vice President of Human Resources will lead all global HR strategy and operations for IEG across EMEA, China, Latin America, and North America. This executive will oversee a global workforce of 1,500+ employees and a distributed HR team, partnering directly with the IEG President and senior functional leaders. This role requires a proven HR leader with extensive global manufacturing experience, strong capability in engineering-centric businesses, and a track record of building and executing HR strategies that deliver measurable business results. Job Duties: - Lead the global HR function across 30+ sites, including talent management, organization design, leadership development, workforce planning, employee relations, and total rewards. - Partner with the President and executive team to shape organizational strategy and build HR capabilities aligned to growth and operational goals. - Manage and develop HR teams in distributed locations, ensuring alignment, capability building, and consistent global execution. - Build scalable HR programs such as performance management, succession planning, and leadership development that drive measurable improvements in capability, retention, and business performance. - Ensure compliance with employment, labor, and HSE regulations across multiple jurisdictions. - Act as executive-level advisor on workforce, culture, talent risks, and organizational design. - Lead HR components of M&A due diligence, integration, and organizational transitions. - Manages relationship with PKOH and provide information to corporate as required. - Maintains strict confidentiality and data integrity. What you need to be successful: - Bachelor degree in Human Resources or related field of study. - 10 + years in Human Resources leadership role leading HR teams at scale in multi-site manufacturing environment. - Proven success leading HR in global regions such as EMEA, China, and Latin America - Experience with an enterprise level HCM. Preferred Qualifications: - Graduate studies in Human Resources - SPHR certification We offer a competitive benefits package which includes medical, dental, vision, life insurance, 401(k) and more. ParkOhio provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Route Sales Representatives are critical to our success at FritoLay! Our Route Sales Representatives are responsible for delivering, selling, and merchandising FritoLay's complete line of products including Lay's, Doritos, Cheetos, Tostitos, Fritos, and many more to local stores including gas stations, dollar stores, and large grocery stores. As a Route Sales Representative, you drive a FritoLay truck to different stores, work independently to unload orders, merchandise product, and partner with store managers to increase sales, order, and maintain records throughout the day. Although you will start out as a Route Sales Representative for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: Learn the basics of the role in four to six weeks of dedicated driving and selling training with our amazing team members Run routes for team members', experience different stores, and meet new customers Grow sales on the route by building relationships, selling in displays, and completing national initiatives Attain a route with set days off/schedule with time Work in a fun, fast paced, and physical environment We operate 24 hours a day, so you may not have a typical schedule! Team members often work weekends and holidays. Our jobs are physical! If you have never worked in this type of role before, you should understand that you will be on your feet for the entirety of your shift. Here are the minimum qualifications of this job: Be 21 years of age or older Have a valid driver's license with proof of insurance and ability to obtain other licensures as required by state law Be able to frequently lift 40 lbs. with or without a reasonable accommodation As a full-time team member, you will be eligible to receive full company benefits. You can learn more about our benefits on our career site, but here are some of the benefits we offer: 401(k) contribution Health, dental and vision insurance Financial support to help obtain a degree Company discounts and perks Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & View the PepsiCo EEO Policy.

Pipe Welder Combo (No Per Diem) Long Term Work Hours Mon - Fri 7:00AM - 3:30PM Must pass pre-employment physical and background Must pass Welding Test SUMMARY Combination - Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS - Work within precise limits or standards of accuracy. - Make decisions based on measurable criteria. - Apply basic mathematics to solve problems. - Plan work and select proper tools. - Visualize objects in three dimensions from plans and drawings. - Compare and see differences in the size, shape and form of lines, figures and objects. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 50% Walking 20% Sitting 30% b. Lifting 35 lb. Carrying 35 lb. Pushing 0 ft-lb. Pulling 0 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

The Floating Operator is assigned to work on a variety of tasks throughout the Reflective plant including but not limited to Material Handling, R 1, R 2, Finishing, Metalizer, Inks and Shipping/ Receiving as the primary responsibility. The Floating O Floater, Shift, Float, Support, Operations, Production, Retail

This position is responsible for ensuring the production of safe, high-quality food products in compliance with regulatory, customer, and company standards. This role leads the facility's food safety and quality programs, oversees compliance with HACCP, FSMA, and GFSI requirements, and provides leadership to QA and sanitation teams to maintain continuous improvement in quality systems and plant hygiene. Essential Functions Quality Assurance & Compliance Manage and maintain the plant's Quality Management System (QMS) to meet internal, customer, and third-party audit requirements. Oversee daily QA operations including product testing, process verification, and documentation review. Lead and coordinate internal, customer, and regulatory audits (FDA, USDA, State, GFSI). Investigate non-conformances, implement root cause analysis, and ensure timely corrective and preventive actions (CAPAs). Ensure compliance with labeling, allergen control, and traceability requirements. Maintain accurate and complete quality and production records in compliance with regulatory standards. Food Safety & HACCP Serve as the plant's PCQI (Preventive Controls Qualified Individual). Oversee implementation, verification, and validation of food safety programs including HACCP, FSMA Preventive Controls, environmental monitoring, and supplier verification. Lead the Food Safety Team and ensure effective communication of food safety objectives across departments. Monitor trends in microbiological results, environmental swabs, and product testing to proactively identify risks. Leadership & Training Develop and deliver employee training on GMPs, food safety, allergen control, sanitation, and quality awareness. Promote a culture of food safety and continuous improvement throughout the facility. Collaborate cross-functionally with Production, Maintenance, and Sanitation teams to ensure alignment with quality objectives. Continuous Improvement Analyze process data to identify opportunities for quality improvement and waste reduction. Support implementation of initiatives related to product quality and safety. Recommend and validate changes to formulations, processes, or equipment to improve quality performance. Competencies Page Break Problem Solving/Analysis Works independently Dependable Strong Communication Skills Teamwork Innovative Computer Skills Time Management/Initiative Attentive to detail Trainable Page Break Supervisory Responsibility This position will have direct supervisory responsibility for a portion of the Quality Assurance team. Work Environment This job operates in a plant environment and office. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands for this position are approximately 60% active and 40% sedentary work. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently will need to sit, stand, walk and climb stairs. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position. Typical schedule is Monday through Friday with occasional evening and weekend work possible based on specific project needs. Travel Less than ten percent travel expected for this position. Required Education, Experience & Certifications Bachelor's degree in related field and/or a minimum of 10 years' experience in food manufacturing quality assurance and/or sanitation leadership. Knowledge of food safety regulations including HACCP, GMP, FSMA and SQF. Strong leadership and team management experience. Ability to conduct audits, troubleshoot quality issues and implement improvements. Preferred Education, Experience & Certifications Master's degree in food science. Bilingual in English/Spanish. Preventive Controls Qualified Individual certification. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. Monday - Friday; night or weekends as needed for projects 8:00 am - 5:00 pm

The Groundman position is your first step to a rewarding career in the construction and maintenance of our nation's Power Grid. You will assist your team in building, repairing, and maintaining overhead electrical distribution systems. Job Duties As a Groundman you will support your team by: Securing the safety of yourself and others. Assisting fellow line-workers in meeting project objectives. Readily joining storm restoration efforts in times of need. Operating vehicles and equipment in a professional manner. Continuing training to improve technical and leadership skills. Team-Oriented Self-Motivated Customer Service Focused Ethical and Honest Dutifully follows established Safety Rules and Company Policy Physical Aspects The physical demands described here are typical of those that must be met by a team-member to successfully perform the essential functions of their job in powerline construction. While performing the duties of this job, team-members are regularly required to talk or hear. The team-member is frequently required to stand; walk; use hands to fingers, handle, and feel; and reach with hands and arms. The team-member is frequently required to perform rigorous physical labor; sit; climb different types of structures (wood, steel, etc.); or balance; and stoop, kneel crouch or crawl. Team-members frequently lift or move up to or in-excess of 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment While performing the duties of this job, team-members may frequently be exposed to fumes or airborne particles, moving mechanical parts and vibration. Team-members are occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment can be loud. Powerline construction work is performed outside and is subject to diverse weather conditions. Able to obtain a Commercial Driver's License permit within 60 days of employment. Able to read/write and communicate effectively. Able to travel long distances on short notice, when required. Able to work for extended periods in various locations, when required. Able to lift in-excess of 50 lbs. Willing to work over‑time when requested. Willing to work outside of the normal work schedule including weekends, holidays, and overtime as required for the position. Functions to be Expected in Overhead Powerline Construction Works safely while performing new construction, maintenance, or repair work of energized and de‑energized overhead work. Properly inspects rubber goods and Personal Protective Equipment (PPE). Understands when to wear personal protective equipment. Sets poles and anchors. Assists with installing transformers, lightening arrestors, cutouts, cross-arms, insulators, switches and switchgear. Assists in replacing fuses in transformers and clears faulted circuits and systems. Frequently works with energized high voltage systems requiring skill and care to protect the lives of themselves and others. Maintains company vehicles, equipment and tools in good working order. Able to perform rigorous physical labor. Understands proper use of company radio. Understand basic rigging, hand lines, and lineman knot tying. Understand the proper use and maintenance of hand tools. Capable of receiving and following directions. Possess a basic knowledge of materials used in line work. Able to identify primary and secondary voltage on a circuit. Must be familiar with induced voltage. Capable of assisting with the installation and hook up of a single‑phase transformer. Capable of performing basic bucket rescue/escape. Understands the basic concepts of equipment set up and grounding. Capable of working at heights and/or confined spaces. Understands excavation and shoring requirements. Capable of checking voltage on transformers. Capable of installing and removing a service. Must be able to climb different types of structures (wood, steel, etc.) and possess the necessary tools to do so. Understands how and when to use Kellum grips. Able to identify different types of materials used in line work. Must be able to work outside, frequently in inclement weather. Does all other related work as required to complete the job. Equal Opportunity Employer - Minorities/Females/Veterans/Disabled VA Approved Apprenticeship Program - GI Bill Benefits Available to Eligible Veterans Pike Electric, LLC is a Non‑union Company NOTE This job description is not intended to be all‑inclusive. Team‑members may perform other related duties as requested to meet the ongoing needs of the organization. About Us Founded in 1945, Pike is a leading provider of construction, repair and engineering services for electric and gas utilities, as well as telecommunications companies with a growing portfolio of turnkey renewable projects. We work with hundreds of utility clients across the country, and we continuously expand our offerings to supply our customers with the ideas, technology, experience, manpower and equipment to perform any job. “Essential” is the one word that sums up who we are, the work we do and what our people mean to us. Each of our employees plays a critical role in ensuring that infrastructure systems are up and running when people and businesses need them. Pike is a family‑oriented workplace with a strong culture of safety, collaboration, innovation and exceptional customer service. Electric We work with utilities across the country to solve our nation's energy infrastructure challenges, from designing new transmission and distribution systems, upgrading and managing installation of the latest smart meter technologies, and integrating renewable energy sources onto the grid. Electric We work with utilities across the country to solve our nation's energy infrastructure challenges, from designing new transmission and distribution systems, upgrading and managing installation of the latest smart meter technologies, and integrating renewable energy sources onto the grid. #J-18808-Ljbffr

*Come explore opportunities within committed to challenging conventions and innovating next-generation technologies that transform experiences on the water and beyond. Brunswick believes “Next Never Rests,” and we offer a variety of exciting careers and growth opportunities within united teams defining the future of marine recreation.***Innovation is the heart of Brunswick. See how your contributions will help transform vision into reality:**Position Overview:As part of the talented Freedom Boat Club Operations team, the Dock Master greets members and works on the docks. We are looking for customer-focused friendly and upbeat individuals. This position is part-time and requires availability on weekdays, weekends and holidays. **At Brunswick, we have passion for our work and a distinct ability to deliver.**Essential Functions:* Welcome and acknowledge all guests according to company standards* Anticipate and address guests' service needs* Thank guests with genuine appreciation* Make and answer telephone calls using appropriate etiquette* Manage the check-in and check-out process using a handheld tablet* Perform equipment checks to make sure all necessary equipment is on board* Clean and maintain vessels and Club location according to company standards* Daily clerical work to prepare reservation logs, fuel logs and weather reports* Familiarize yourself with local waters in order to provide basic guidance to members* Speak with others using clear and professional language* Ensure uniform and personal appearance are clean and professional* Follow all company policies and procedures* Maintain confidentiality of proprietary information* Perform other reasonable job duties as requested by supervisors**Diversity of thought and experiences is fundamental when imagining the unimaginable. Certain skillsets/experiences are necessary; however, others can be developed along the way.**Required Qualifications:* Pass a background check and drug screen* Valid driver's license and good driving record* High school diploma* At least 18 years of age* Strong communication and customer service skills* Ability to maintain a calm, positive attitude during periods of high activity* Ability to read and manipulate handheld tablets* Positive, cooperative attitude with the capability of working unsupervised* Adhere to all safety policies Preferred Qualifications:* Experience in or around boats Working Conditions:* Work outside in the state's elements and stand for an extended period of time* Comfortable with physical demands of the role including bending, kneeling, balancing and carrying equipment up to 25 pounds* Work in a marina setting on docks that may be fixed or floating* Work near and on the water* Safely move on, off and in vessels during various tide and weather conditions The anticipated pay rate for this position is $14/hr.This position is eligible to participate in valued Brunswick benefit offerings including 401k (up to 4% match), wellbeing program, and product purchase discounts.**Why Brunswick:**Whatever tomorrow brings, we'll be at the leading edge. As the clear leader in the marine industry, we're committed to our values and supporting our exceptional people. We offer and encourage growth opportunities within and across our many brands. In addition, we're proud of being recognized for making a splash with !**About Freedom Boat Club:**Freedom Boat Club - the world's largest members-only boat club - was founded in 1989 in Sarasota, Florida. Today, the Clubs 400+ locations welcome hundreds of members to its docks each day to enjoy a day on the water while we take care of the rest including fueling, cleaning, maintenance, and more.With over 30 years of Boating Made Simple, Freedom Boat Club (a division of Brunswick Corporation) continues to be a passionate group of individuals who focus on raising the bar in everything that we do. We are always looking for hardworking, motivated and competitive people who share our passion for getting others out on the open waters.To learn more about open positions within the Freedom Boat Club, please visit the.*Next is Now!**We value growth and development, recognizing that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying.*Brunswick is an Equal Opportunity Employer and considers all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other characteristic protected by federal, state, or local law. Diversity of experience and skills combined with passion is key to innovation and inspiration and we encourage individuals from all backgrounds to apply. If you require accommodation during the application or interview process, please contact ****************************** for support.For more information about EEO laws, - clickand Privacy PoliciesBrunswick does not accept applications, inquiries or solicitations from unapproved staffing agencies or vendors. For help, please contact our support team at: ****************************** or ************.All job offers will come to you via the candidate portal you create when applying through a posted position through . If you are ever unsure about what is being required of you during the application process or its source, please contact HR Shared Services at ************ or ******************************.#Brunswick Corporation - Freedom Boat Club #J-18808-Ljbffr