Welder jobs at Eaton - 165 jobs

Eaton's IS Filtration division is currently seeking a Basket Fabricator - Production Welder. The hourly rate for this position is $21.00 per hour. The hours for this shift are 7:00 am - 3:00 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. **What you'll do:** - Read and interpret prints, charts, work orders and other documents used in the manufacture of strainer baskets - Accurately use measurement and cutting equipment such as tape measures calipers, hand shears, table shear, drill press, cut off tools, grinders, engraver and inductive spot welding machines - Use roll forming equipment and perform simple assembly of metal components - Assist with cycle counting of inventory and annual physical inventory as needed **All manufacturing employees at Williamsport are also responsible for** : - Complying with all Environment, Health, & Safety (EHS) standards - Complying with all work and process instructions - Identifying improvement opportunities - Utilizing proper Personal Protective Equipment (PPE) for each task associated with the job - Working safely and reporting all near misses, illnesses, and injuries following established procedures. - Completing any initial or recurring training issued by the site or Eaton **Qualifications:** **Required Qualifications:** - High school diploma or equivalent from an accredited institution - Minimum one (1) year of experience in a manufacturing or operations environment - Able to work in the United States without corporate sponsorship now and in the future - Able to lift up to 40 lbs - Reside within a 50-mile radius of Williamsport, MD + No relocation benefit is being offered for this position. + Candidates who are active duty military members are exempt from the geographical area limitation. **Preferred Qualifications:** - Metal fabrication experience - Basic computer and software skills We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (********************************************* for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Job DescriptionBenefits: 401(k) 401(k) matching Health insurance Paid time off Training & development Vision insurance Schedule: MondayFriday, 5:00 AM 1:30 PM Mid-State Sales, an ISO 9001-certified manufacturing company, is seeking an experienced and detail-oriented TIG Welder to join our high-performance production team. This role is key to producing precision hydraulic fluid conveyance products that meet demanding industry standards. About the Role As a TIG Welder at Mid-State, you will work with carbon steel, stainless steel, and aluminum tubing and end connections. Our products are engineered for high-pressure applications, requiring precision workmanship and a strong focus on quality. Key Responsibilities: Perform TIG welding on carbon steel, stainless steel, and aluminum components. Set up and operate Miller welding equipment for production needs. Execute silver brazing and related preparatory/finishing processes (including cleaning and braze scale removal). Fabricate and repair parts as needed to support production. Maintain quality and safety standards in line with ISO 9001 requirements. Qualifications: Proven experience in TIG welding with strong technical skills. Ability to set up and adjust TIG welding equipment for optimal performance. Knowledge of silver brazing techniques and post-braze cleaning preferred. Quality-focused mindset with attention to detail. Ability to work independently and as part of a team. Why Join Mid-State Sales? Competitive pay based on experience. MondayFriday daylight scheduleno nights or weekends. Steady, full-time work in a clean, organized facility. Opportunities for growth within a stable, established company. If youre a skilled TIG welder looking for a steady schedule, clean work environment, and a company that values quality craftsmanship, we want to hear from you! Apply today to join the Mid-State Sales team.

Job Description Together We Build - Partnership, Innovation, Excellence, and Safety At Kelso Industries, 3,500+ employees across 30 companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. WHO WE ARE Retrofit Technology is part of the Kelso Industries family of companies, a rapidly growing group of mechanical, electrical, and plumbing (MEP+) contractors committed to excellence in safety, quality, customer success, and craftsmanship. Based in Bloomington, California, Retrofit Technology specializes in all aspects of commercial HVAC systems, including installation, maintenance, and service. Our team is equipped to handle projects from start to finish with precision and care. Backed by certified welders, electricians, and service technicians, we have the expertise to tackle even the most challenging HVAC retrofit and mechanical projects-delivering exceptional results every time. ABOUT THE ROLE We are seeking an experienced Pipe Welder to join our growing team and support mechanical and HVAC retrofit projects across Southern California. This position is based out of Bloomington, CA and requires frequent travel to job sites throughout the region. A daily per diem is provided and hotel accommodations are covered by the company when overnight stays are necessary. The Pipe Welder will be responsible for fabricating, assembling, and installing piping systems for commercial and industrial HVAC applications. The ideal candidate has hands-on experience with multiple welding methods and piping materials, values safety and quality, and can work both independently and as part of a field crew. RESPONSIBILITIES Weld and assemble piping systems using various methods (TIG, MIG, stick, brazing, soldering, etc.). Fit, align, and secure pipe systems and supports according to specifications and drawings. Read and interpret blueprints, schematics, and technical drawings. Fabricate and install copper, carbon steel, stainless steel, and PVC piping. Perform rigging, demo, and installation work on HVAC retrofit projects. Inspect completed welds to ensure compliance with codes and safety standards. Collaborate with project managers, foremen, and other trades to complete projects efficiently. Maintain a clean, safe, and organized work area in compliance with OSHA and company policies. QUALIFICATIONS High school diploma or GED equivalent. 3+ years of experience in pipe welding or mechanical retrofit environments. Proficiency in one or more of the following: Soldering or brazing copper pipe Welding carbon or stainless steel pipe Fitting or threading steel and PVC pipe Ability to pass a pipe welding test (administered at our Bloomington shop). Skilled at reading and following mechanical drawings and specifications. Valid driver's license and willingness to travel throughout Southern California. Strong attention to detail, reliability, and safety mindset. COMPENSATION & BENEFITS Hourly wage: $30 - $50 per hour (based on experience and certification) Per diem and hotel accommodations provided for overnight travel Paid travel time to and from job sites Comprehensive benefits package: Medical and dental (50% employer paid) 401(k) with up to 4% company match Eligibility after 30 days of employment Paid Time Off (PTO) and company holidays Opportunities for long-term growth within the Kelso Industries family JOIN OUR TEAM If you're a skilled welder who takes pride in craftsmanship and enjoys working on complex HVAC retrofit projects, we'd love to hear from you. Apply today to join a team that values safety, integrity, and excellence in every project. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from our lowest geographic market up to our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered and forms of compensation that may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. California Pay Range$30-$40 USD Why Join Kelso Industries? Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job DescriptionWelder/Fabricator Contract-to-Hire (Direct Hire Possible for Exceptional Candidates) Industry: Manufacturing/Fabrication Environment: Job Shop - Custom Weldments Pay: $25 - $30/hour Shift: Monday - Thursday, 7:00 AM - 5:30 PM (4x10-hour shifts) Optional Overtime: Friday (minimum of 5 hours if workload allows) No current weekend shifts Benefits: Weekly pay. Eligibility to enroll in health benefits on your first day! Referral Bonuses ($100 per referral) - Ask for details. Position Summary:We are seeking a skilled Welder/Fabricator with strong fitting and fabrication experience to serve as the primary welder in our facility. This role requires expertise in MIG and TIG welding, blueprint reading, and custom fabrication. The ideal candidate will be responsible for producing high-quality weldments, ensuring accuracy and consistency in accordance with AWS standards.Position Responsibilities: Perform MIG and TIG welding on aluminum, stainless steel, and carbon steel materials. Work primarily in flat, horizontal, and vertical positions (minimal overhead welding). Weld material thicknesses ranging from 16 gauge to 1 inch (majority between 16 gauge - 1/2 inch). Read and interpret blueprints and fabrication drawings to fit and fabricate custom weldments. Follow AWS D1.1 welding codes (certifications recommended, but in-house bend/break weld testing is required). Utilize Miller MIG and TIG welding machines; experience with IPG laser welding is a plus. Operate additional shop equipment, including drill presses, grinders, saws, and press brakes as needed. Ensure all welding work meets quality control standards and pass in-house certification tests. Collaborate with the fabrication team to produce high-quality custom projects. Position Requirements: Experience: Extremely Strong fitting and fabrication background (not production welding). Minimum 2+ years of welding experience in a fabrication shop environment. Experience welding aluminum, stainless steel, and steel. Technical Skills: Proficiency in reading blueprints and fabrication drawings. Knowledge of AWS D1.1 standards; welding certifications preferred. Ability to perform MIG and TIG welding with Miller welding machines. Experience operating additional fabrication tools (drill press, grinders, saws, etc.). Soft Skills: Strong attention to detail and quality. Ability to work independently as the lead welder in the shop. Willingness to assist with other fabrication tasks as needed. About Spark Talent Acquisition:Spark Talent Acquisition is a Michigan-headquartered recruiting and staffing company that connects great talent with great employers. We understand that building the right team is vital to success. Listening to our clients and creating customized workforce strategies is at the core of what we do. We pride ourselves in team development as it matches our purpose as an organization to help people grow.

Apply Description Freeman Boatworks is a premier boat manufacturing company specializing in custom, high-performance vessels. Our commitment to craftsmanship and innovation drives our success. We are seeking a skilled Welder to support the fabrication and assembly of aluminum components for our world-class offshore fishing catamarans. This position is ideal for a detail-oriented professional who takes pride in precision, quality, and exceptional workmanship. Responsibilities Perform TIG/GTAW welding and fabrication on aluminum parts and structures. Operate bending, cutting, and sanding equipment, including band saws, benders, and sanders. Read and interpret technical drawings, blueprints, and job specifications. Inspect and verify welds to meet Freeman Boatworks' quality and safety standards. Collaborate with other team members to ensure timely completion of projects. Requirements Minimum 2 years of experience in gas tungsten arc welding (GTAW/TIG). Experience working with anodized aluminum pipe preferred. Prior marine welding or fabrication experience strongly preferred. Proficiency with standard hand and power tools. Excellent attention to detail and commitment to quality Ability to stand for extended periods and work in a non-climate-controlled environment. What We Offer Competitive pay Paid time off and holidays Comprehensive benefits: medical, dental, vision, company-paid life and disability insurance, and more! 401(k) with company match A people-focused workspace built on teamwork and innovation Please note: Employment at Freeman Boatworks is contingent upon successful completion of a background check and drug screening.

IS LOCATED IN COLUMBUS, TX WELDER/FITTER BENEFITS: Titan offers: Competitive pay Medical benefits available on day one (1) of your employment 10paid vacation days, 10 paid holidays 3 paid personal days 401(K) Great working environment Position Summary: Responsible for completing routine welding and fitting assignments within clearly defined processes while working under moderate supervision. PIPE WELDER/FITTER Uses metal core mig, fluxcore, subarc, tig or stick welding processes (must pass two or more) Reads and understands P & ID drawings and other package layout drawings to determine appropriate welding process May weld brackets and braces and use grinders. May position pieces to be welding into jigs, holding fixtures, guides and steps using measuring instruments and hand tools. May perform position welds on code materials Proficient in flame and plasma cutting torches Be able to read and understand blueprints and perform own fit-up Must be able to operates basic cutting equipment May layout and mark weld points on parts or subassemblies using rule, square, scribe or templates Positions pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools Works with different types and sizes of structural materials Inspects complete welds to determine structural soundness Operates cutting equipment Safely operates iron worker, overhead cranes, rigging, pipe threading machine, welding machine, tube bending machine, and various pneumatic hand tools Assembly of components with some fabrication of equipment needed for the job Required Test: Must be able to pass a 6G weld test; vessel or pipe Must be able to pass a written fitters exam Preferred Education and Experience: High school diploma or equivalent or equal combination of education and experience Must have five (5) years related experience and/or training; welding school or on the job training Knowledge of different types and sizes of pipe and vessel material Physical Strain: Lifting up to 50 pounds with frequent lifting and/or carrying objects weighing up to 30 pounds Bending, squatting, climbing, pulling, stooping, twisting, reaching, working at elevated heights

Job Description PURPOSE The Certified Pipe Welder is responsible for performing high quality pipe welding operations in accordance with industry codes, safety standards and project specifications. This role ensures the structural integrity and precision of fabricated components while contributing to the efficient project delivery and overall quality assurance. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. Perform Pipe welding using appropriate processes (MIG and TIG) based on project requirements and certifications. Interpret blueprints, technical drawings, and specifications to prepare and execute welds accurately. Inspect materials, joints, and completed welds to ensure compliance with industry codes, standards (e.g., AWS, ASME), and quality requirements. Operate and maintain welding tools, equipment, and machinery in a safe and efficient manner. Collaborate with supervisors, engineers, and fabricators to ensure welds align with design specifications. Follow established safety procedures, including the use of PPE, to maintain a safe work environment. Identify and report material defects, equipment issues, or quality concerns promptly. Maintain welding certifications through ongoing training and testing as required. Document work performed, including weld logs and inspection records. MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS High school diploma or equivalent. Proven experience as a welder in construction, manufacturing or industrial settings. Strong knowledge of welding techniques, metallurgy and fabrication processes. Ability to read and interpret technical drawings, blueprints and welding symbols. Familiarity with applicable codes, standards and safety practices. CERTIFICATES AND LICENSES: Current and valid Pipe Welding Certification required. MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTAL FUNCTIONS Strong attention to detail. Problem-solving and adaptability in dynamic work environment. Commitment to safety and quality standards. Strong teamwork and commitment to skills. ENVIRONMENTAL ADAPTABILITY Work is performed in both shop and field settings. Varying environmental conditions including heat, humidity, cold, and outdoor weather. Ability to stand, stoop, crouch and bend for extended periods. Capable of lifting, carrying and moving objects us to 50 pounds and occasionally heavier with assistance. Sufficient hand-eye coordination and manual dexterity to operate welding equipment Ability to tolerate exposure to heat, noise, dust and fumes with following safety protocols. EQUIPMENT/TOOLS Welding machines and processes (MIG, TIG, Stick, Flux Core) Cutting equipment (oxy-acetylene torch, plasma cutter, grinders, saws) Hand tools (hammers, clamps, chisels, wrenches, measuring devices) Power tools (drills, grinders, sanders, portable saws) Welding jigs, fixtures, and positioners Personal Protective Equipment (PPE) including welding helmet, gloves, respirators, safety glasses, and protective clothing Lifting and rigging equipment (hoists, cranes, forklifts) when applicable Blueprint reading tools and software (ability to read and interpret welding symbols, shop drawings, and technical diagrams) Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

PURPOSE The Certified Pipe Welder is responsible for performing high quality pipe welding operations in accordance with industry codes, safety standards and project specifications. This role ensures the structural integrity and precision of fabricated components while contributing to the efficient project delivery and overall quality assurance. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. Perform Pipe welding using appropriate processes (MIG and TIG) based on project requirements and certifications. Interpret blueprints, technical drawings, and specifications to prepare and execute welds accurately. Inspect materials, joints, and completed welds to ensure compliance with industry codes, standards (e.g., AWS, ASME), and quality requirements. Operate and maintain welding tools, equipment, and machinery in a safe and efficient manner. Collaborate with supervisors, engineers, and fabricators to ensure welds align with design specifications. Follow established safety procedures, including the use of PPE, to maintain a safe work environment. Identify and report material defects, equipment issues, or quality concerns promptly. Maintain welding certifications through ongoing training and testing as required. Document work performed, including weld logs and inspection records. MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS High school diploma or equivalent. Proven experience as a welder in construction, manufacturing or industrial settings. Strong knowledge of welding techniques, metallurgy and fabrication processes. Ability to read and interpret technical drawings, blueprints and welding symbols. Familiarity with applicable codes, standards and safety practices. CERTIFICATES AND LICENSES: Current and valid Pipe Welding Certification required. MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTAL FUNCTIONS Strong attention to detail. Problem-solving and adaptability in dynamic work environment. Commitment to safety and quality standards. Strong teamwork and commitment to skills. ENVIRONMENTAL ADAPTABILITY Work is performed in both shop and field settings. Varying environmental conditions including heat, humidity, cold, and outdoor weather. Ability to stand, stoop, crouch and bend for extended periods. Capable of lifting, carrying and moving objects us to 50 pounds and occasionally heavier with assistance. Sufficient hand-eye coordination and manual dexterity to operate welding equipment Ability to tolerate exposure to heat, noise, dust and fumes with following safety protocols. EQUIPMENT/TOOLS Welding machines and processes (MIG, TIG, Stick, Flux Core) Cutting equipment (oxy-acetylene torch, plasma cutter, grinders, saws) Hand tools (hammers, clamps, chisels, wrenches, measuring devices) Power tools (drills, grinders, sanders, portable saws) Welding jigs, fixtures, and positioners Personal Protective Equipment (PPE) including welding helmet, gloves, respirators, safety glasses, and protective clothing Lifting and rigging equipment (hoists, cranes, forklifts) when applicable Blueprint reading tools and software (ability to read and interpret welding symbols, shop drawings, and technical diagrams) Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job DescriptionBenefits: 401(k) 401(k) matching Bonus based on performance Competitive salary Dental insurance Free uniforms Opportunity for advancement Training & development Vision insurance SI Utility is seeking an experience Sub Arc Welder (SAW Operator) to join our Utility Pole production team. This position operates Submerged Arc Welding (SAW) equipment to perform precision longitudinal welds on tubular steel poles and cross arms. The ideal candidate takes pride in producing high-quality welds, maintaining safety compliance, and ensuring documentation accuracy throughout every step of the process. Key Responsibilities: Welding & Fabrication Operate Submerged Arc Welding (SAW) long seam machine to weld longitudinal seams on utility poles and cross-arms. Review drawings, BOMs, WPS/WPQRs, and weld maps to ensure compliance with specifications. Set up pole shafts and arm shells ensuring proper alignment, seam straightness, and root gap control. Perform root, fill, and cap passes following WPS parameters for pole-grade steels (e.g., A572 Gr50). Monitor amperage, voltage, wire speed, and travel speed for proper weld penetration and reinforcement. Manage flux drying, screening, feeding, and recycling systems. Utility-Specific Duties Verify material heat numbers and maintain traceability prior to welding. Ensure seam orientation aligns with arm locations, handholes, grounding attachments, and other features. Assist with arm box seams and splice welds. Confirm weld quality meets ANSI/TIA, RUS, and customer specifications. Prepare seams for galvanizing, ensuring proper venting and drainage. Safety & Compliance Follow all OSHA and company safety standards. Complete pre-use inspections on welding equipment, cranes, and rigging. Adhere to LOTO and confined space procedures when applicable. Maintain required PPE (hood, gloves, FR gear, hearing and eye protection). Quality & Documentation Inspect welds for penetration, uniformity, and overall quality. Record weld parameters, heat numbers, and operator details. Support UT/MT inspections and corrective actions for nonconforming welds. Complete weld logs, seam inspection sheets, and traveler documentation. Maintain 5S standards and support ISO 9001 processes. Qualifications & Skills Proven experience operating Submerged Arc Welding (SAW) systems in a tubular steel or pole fabrication environment. Ability to read drawings, WPS, and weld maps accurately. Knowledge of galvanizing effects on welds and material handling requirements. Crane and rigging experience (certification preferred). Strong focus on safety, quality, and production efficiency. Average 50 hours per week. Benefits: Safety First Company Full benefits package Paid employee medical Competitive pay Generous PTO policy 401k with match Weekly pay Semi-annual bonuses Company provided uniforms No travel required Work in a family environment Position in an expanding company where you can grow your career

Principle Responsibilities Skilled in general mechanical abilities. Must be able to read blueprints; layout to tight tolerances. Must be able to weld 6G and pass an Xray quality proficiency test. Using arc welders, gas welders, and gas torches, welds together metal components and alloys such as pipelines, boilers for a variety of complex precision assemblies. Involves a considerable amount of welding to high strength and pressure requirements. Joins together components of fabricated sheet metal assemblies; cut, trim, or scarf metal objects to dimensions, as specified by layout, work orders, or blueprints. Requirements High school degree or equivalent education/experience plus three years trade related experience preferred. Certification required. Capabilities Ability to read and interpret blueprints, manuals. Physical Requirements Standing, bending, stooping, lifting up to 70 lbs. Equipment to be Used Arc welders, gas welders, gas torches. Note Duties and skills required for this position are general and describe the principal functions, level of knowledge and skills required of this job. You should not consider it an all-inclusive listing of work requirements. You may be asked to perform other duties as assigned, including work in other functional areas. Willingness to contribute in such a manner is taken into consideration in job candidacy, transfer, and performance appraisal. The Precision Companies are committed to providing: An environment that encourages all employees to make full use of their talents Equitable compensation Good working conditions Opportunity for personal development Precision Companies is an Equal Opportunity employer committed to workplace diversity. All applicants will be considered with equal opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected characteristics. Precision Companies participates in the E-Verify program as required by law. Precision Companies is dedicated to working with and providing reasonable accommodation to applicants and employees with physical and mental disabilities. Precision Companies is a drug-free workplace. Job Type: Full-time Job Type: Full-time Pay: $28.00 - $34.00 per hour Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Health savings account * Life insurance * Paid time off * Professional development assistance * Tuition reimbursement Shift: * 8 hour shift Ability to Commute: * Cocoa, FL 32926 (Preferred) Ability to Relocate: * Cocoa, FL 32926: Relocate before starting work (Preferred) Work Location: In person Job Requirements

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. Core Responsibilities Fabrication & Assembly: Cut, fit, and join metal components to build various store fixtures and retail equipment. Blueprint Interpretation: Read and use tape measures, protractors, and engineered drawings to ensure welds meet exact specifications. Equipment Operation: Set up and adjust welding machines according to gauge and product requirements; may also operate manual or semi-automatic equipment. Quality & Safety: Inspect final products for quality, maintain a clean work area, and strictly follow safety protocols while wearing PPE (helmets, respirators, etc.). Key Requirements & Skills Experience: Requires 1-2 years of production-setting MIG welding experience or formal technical training. Certifications: Candidates must pass a Madix-specific weld test; AWS or ASME certifications are preferred but not always required. Technical Math: Proficiency in basic math, including fractions and angles, is essential for accurate measuring and cutting. Benefit Details Group Health Insurance Company Paid Group Term Life Dental, Vision, Short Term Disability, Long Term Disability, and Critical Care 401k - Eligible day one of employment (Contributions can be from 1% to 50% of salary. Company match of up to 4% quarterly based on safe harbor election) Holidays - 9 per year (Eligible after 30 days of employment) Vacation time Educational Assistance Employee Assistance Program Onsite Clinic - Free medical visits Safety and Attendance incentives Employee Appreciation Days If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. welder uses MIG (metal inert gas) welding equipment to assemble fabricated metal products in an efficient manner to maximize production. This Perform daily functions as directed by daily work orders and/or Supervisor/Lead in the time allocated per company standards. Maintain and produce a level of output that minimizes production delays. Set up and properly adjust welding equipment according to gauge and product specifications. Parts must be welded to 1 to 2 years high school. High school diploma/ GED preferred or 1 year factory/ The MIG and verified to the drawing. Ensure that the correct raw material or sub-assembly is being used. Report production and daily work utilization by scanning into RFGen daily. Must keep accurate quantity counts of material and scrap. Produce strong penetrated welds that are non-porous and consistent. Ensure that the fixture does not have any accumulated weld slag that could affect the part's placement in the fixture or its quality. Grind or blow off if needed. Ensure that all parts are ground smooth if required by the drawing. Follow required procedures and use appropriate jigs and fixtures to assist in the assembly process Perform a 100% inspection on the first completed part per the applicable part drawing. Continue to check parts during the run in accordance with the Madix Operator/Inspection Report. Detect and promptly report defective materials or questionable conditions to the Supervisor/Lead. Responsible for keeping track of company tools and equipment. Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter. Observe and act upon machine malfunction warnings and alarm signals. Exercise quality control by comparing the welded produced product to the product's blueprints templates, and/or specifications. Perform quality checks by evaluating weight, size, shape, and/or texture of product. Measure work pieces to determine accuracy utilizing rulers, templates, or other measuring instruments Responsible for maintaining a safe and clean work environment by complying with procedures, rules, and regulations as well as general hygiene regulations. Comply with all work related activities in a fair, ethical, and consistent manner. Adhere to all safety standards and company policies including attending mandatory safety training. Report all accidents and incidents immediately whether major or minor. Be an active participant in lean events as directed by supervisor. Responsible for taking a proactive approach to continuous improvement including productivity, quality, safety, environmental, and ergonomics as well as being a contributing team member in a fast paced environment. Communicate effectively with other workers to efficiently continue workflow. Perform other duties as assigned. May be required to work in non-MIG weld jobs as requested. Ability to safely operate, set up, and adjusts MIG welding equipment and operate simple hand and power tools. Ability to weld vertical or flat welds with acceptable quality consistently. Ability to weld the following and any combinations of the following: Wire 24 gage to 50 & Metal ½ plate to 24 gauge. Ability to stand, walk, bend, climb, squat, and weld in awkward positions for prolonged periods. Must have manual dexterity and strong hand-eye coordination. Ability to work levers, buttons, and/or foot pedals. Ability to use simple gauges and other instruments. Ability to communicate effectively with coworkers, supervisors, and managers. Able to understand and execute instructions/directions. Must be available to work weekends and/or overtime. Ability to work and concentrate in a noisy environment. Ability to fractions and angles required. Ability to read and use a tape measure, protractors, and interpret blueprints or simple drawings required. Ability to read and write a must. wear protective equipment such as earplugs, safety glasses, gloves, welding helmets, boots, respirators, etc. Ability to work independently in a fast paced environment as well as within a team. Ability to lift up to 50 lbs. Ability to observe and learn from experienced welders. Education and Experience Must pass Madix weld test; welding certification a plus. Working knowledge of welding process and equipment. Must have formal MIG welding training through a community college or technical school or hands on experience in a production setting. Requires knowledge equivalent manufacturing related experience. Computer skills are a plus. Good math skills including Work Environment Manufacturing plant environment with extreme fluctuation in temperature. Working with equipment that produces high heat and flames. Dusty and noisy environment. Exposure to odors and fumes. Benefit Details Group Health Insurance Company Paid Group Term Life Dental, Vision, Short Term Disability, Long Term Disability, and Critical Care 401k - Eligible day one of employment (Contributions can be from 1% to 50% of salary. Company match of up to 4% quarterly based on safe harbor election) Holidays - 9 per year (Eligible after 30 days of employment) Vacation time Educational Assistance Employee Assistance Program Onsite Clinic - Free medical visits Safety and Attendance incentives Employee Appreciation Days If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

A 3rd Shift Welder for Bastian Solutions will be responsible for general welding/fitting producing weldments for material equipment projects. The main emphasis for this position is welding/fitting, other duties to include fabrication, assembly, and painting of projects as well as general repair and maintenance of Bastian Solutions shop equipment. A Welder will be responsible for maintaining tolerances and dimensions specified by individual print. A Welder I will have 1-2 years of experience in the welding/fitting field. .Job Functions: With guidance ability to build high quality welded parts from blueprints with low rejection rate. **Must maintain tolerances detailed on blueprints With guidance works from sketches/drawings to produce parts from sheet metal, plate, bar stock, and aluminum Keep workspace in a neat and organized order Show mutual respect for coworkers Show up to work every day on time. Sunday to Thurs 10:30 pm to 7 am Maintain a positive attitude Overtime required when necessary Follow safety protocols per JSA (Job Safety Analysis) Preferred Skills and Required Qualifications: Relevant welding experience required. MIG welding is preferred Positive attitude, able to handle tense situations that arise Team player, able to take direction General knowledge of fabrication equipment including horizontal saws, lathes, mills, & drill presses Onsite weld test given prior to employment to establish skill set Minimum High School or GED diploma Travel Requirements: No travel is required for this role. To learn more about us, click the following link - ******************************************* About Bastian Solutions: Bastian Solutions, a Toyota Advanced Logistics company, is an independent material handling and robotics system integrator providing automated solutions for distribution, manufacturing, and order fulfillment centers around the world. Our team specializes in consulting, system design, project management, maintenance, and installation, while sourcing the best equipment and automation technology. We take great pride in providing exceptional service and flexibility to our customers. In addition to exciting work at a growing company, we offer the following benefits: Health, Dental, and Vision Insurance 401(k) Retirement Plan with a company match Vacation/Holiday Pay Tuition Reimbursement Flexible Work Schedules Volunteer Work Professional Associations, Conferences and Subscriptions Company Meetings & Events Bastian Solutions does not work outside recruiting agencies. No solicitation phone calls please.

Now Hiring: Skilled Welder (MIG Welder I, II, III) level) Full-Time | On-Site | Day Shift About the Role We're looking for a skilled, safety-conscious Welder to join our growing team! In this hands-on role, you'll be responsible for accurately selecting, measuring, cutting, and welding metal parts to meet project specifications-all while ensuring top-tier quality and adherence to safety standards. As a MIG Welder III, you'll also mentor junior welders, offering guidance and sharing your knowledge to build a strong, skilled team. If you're a problem-solver who takes pride in precision and craftsmanship, we want to hear from you! What You'll Do Weld, assemble, and fabricate metal parts per drawings and specifications. Prep metal surfaces and work areas to ensure strong and accurate welds. Read and interpret blueprints, schematics, and technical drawings. Clean and maintain welding tools and equipment for peak performance. Troubleshoot and resolve welding-related issues. Provide mentorship and support to MIG Welder I and II team members. Maintain a safe, clean, and organized work environment. Your Skills & Strengths Strong attention to detail and commitment to quality. Proficient with MIG welding and able to run MIG machines. Skilled in reading and interpreting complex blueprints and measurements. Solid understanding of steel types, sizes, and thicknesses. Able to work independently with minimal supervision. Team-oriented with a positive, solution-driven attitude. Quick learner who thrives in a fast-paced environment. Working Conditions Indoor manufacturing facility. Exposure to heat, cold, dust, fumes, and airborne particles. Moderate noise level; use of protective equipment required (PPE provided). Dynamic, fast-paced work environment.

Job DescriptionJob Summary: Welder:Play a vital role in our metal fabrication process. Your primary responsibility will be to perform MIG welding on various metal components. Your work will contribute directly to the production of high-quality products that meet our clients' expectations. Attention to detail, precision, and adherence to safety protocols are crucial in maintaining the exceptional standards set by the company. Responsibilities: Welder: Perform MIG welding on carbon steel, stainless steel, and aluminum components, adhering to blueprints, engineering specifications, and verbal instructions. Set up and operate welding equipment accurately, ensuring precision and efficiency in all welding tasks. Inspect welds for quality, making necessary adjustments to meet Company's high standards. Work collaboratively with team members to meet production deadlines and maintain workflow. Adhere strictly to safety protocols to ensure a safe working environment. Maintain and perform regular cleaning and upkeep of welding equipment to ensure optimal performance. Requirements: Welder: Preferred minimum of 3 years of experience in Welding within a manufacturing or metal fabrication environment. Proficiency in working with carbon steel, stainless steel, and aluminum. Strong understanding of MIG welding techniques and the ability to operate and troubleshoot welding equipment. Ability to read and interpret blueprints, specifications, and verbal instructions for precise welding operations. High attention to detail and ability to produce consistent, high-quality welds. Positive attitude, strong work ethic, and flexibility to adapt to changing needs in a dynamic environment. Ability to work both independently and as part of a team to achieve production goals. Welding certifications (e.g., AWS) are preferred but not required. Robotic Welding experience is an ADDED advantage! Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Yellowstone Local is proud to represent Western Utility Telecom, an industry leader in custom steel fabrication for communication towers and utility structures. If you're a skilled welder with a sharp eye for detail and pride in precision craftsmanship, this is your chance to join a team that builds America's infrastructure, literally. What's in it for You? Pay Range: $22.00 - $32.00 per hour Schedule: Day and weekend shift available; weekend shift differential applicable Employment Type: Full-time Comprehensive Benefits: 401(k) with company match Health, dental, and vision insurance Flexible spending account (FSA) Life insurance Paid time off Parental leave Employee Assistance Program (EAP) Retirement plan Why You'll Love It Here High-impact work: You'll fabricate components used in real-world infrastructure projects. Precision-driven culture: If you value doing things right the first time, you'll fit right in. Supportive leadership: Clear direction, consistent supervision, and a team that's got your back. Growth-ready shop: Whether you're looking to grow your welding skills or move up in leadership, this company has the framework to support you. Hands-on environment: Perfect for tradespeople who want to work with their hands and see the results of a hard day's work. Your New Role As a Welder/Fitter in Salem, OR, you'll be responsible for fabricating, welding, and assembling structural steel components for utility and communication projects. You'll work with round and tapered shafts, using GMAW and other welding methods. Your day will include reading blueprints, cutting and fitting material, inspecting for quality, and maintaining a clean and safe shop environment. Daily Responsibilities: Interpret detailed drawings and specifications Cut, fit, and weld steel using GMAW spray transfer and other processes Conduct plasma and oxy/fuel cutting Fabricate specialized fixtures and components Maintain high standards for safety, quality, and accuracy Perform equipment maintenance and assist in shop operations as needed Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. High school diploma or GED preferred Minimum 3 years of experience in both welding and fabrication, ideally in a production or manufacturing environment Proficient in: GMAW spray transfer Structural layout and fabrication tools AWS D1.1 Visual Acceptance Criteria Using layout tools and fabrication equipment Reading and interpreting engineering drawings Basic and advanced math, including geometry FCAW welding for select project applications Strong organizational and communication skills Ability to lift up to 50 lbs, stand for long periods, and work in variable shop conditions Must complete an on-site welding/skills test as part of the hiring process Western Utility Telecom is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #orange

Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production Supervisor, Weld Shop or his/her designate. Skills: To perform the job successfully, an individual should demonstrate the following competencies: 1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. 2. Strong organization and time management skills. 3. High attention to detail. 4. Demonstrate behavior consistent with company values. 5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. 6. Exhibits polite and professional communication via phone, e-mail and mail. 7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. 8. Maintain a collaborative relationship with internal and external stakeholders. 9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. 10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. 11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. 12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. 13. Ability to thrive in a team environment. Physical and Mental Demands: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. * Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. * Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Requirements Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training: * Technical Trades School in Welding * High school GED Required Experience: * 1+ years of welding experience. Other: * Must be willing to work overtime as required. * Minimal travel may be required Work Authorization: Must be able to work in the U.S without sponsorship. Salary Description $22.00-30.00/hour

Working from drawings, specifications, bills of material, material specifications, welding instructions and codes, sets up, fits, clamps, bolts and tack welds diversified structural and weldment assemblies in accord with dimensional and alignment requirements. Requires knowledge of welding technology in addition to welding experiences; fulfills ASME section IX Welding Qualifications. Provides leadership and guidance to helpers and others as they may be assigned to assist. . Key Results Areas by level of work: Level I: Quality - Complete and accurate work performed efficiently * Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed * Working from drawings, specifications, manuals, codes, etc., determines the sub-assemblies necessary, the centerlines and quadrant locations for shell openings. * Directs or personally cuts out these openings. * Fits up and tack welds nozzles, plates, lift lugs, couplings and reinforcements specified for large units. * Makes temporary fixtures when standard fixtures are not available. * Sets up face block, jogs and fixtures in proper locations to minimize the effect of heat, weld distortion and shrinkage during subsequent welding operations. * Repairs and straightens damaged or bent parts. * Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories. * May design and make templates. * Is alert to subsequent machining allowances * May consult with welder on methods to offset effects of heat on dimension alignment to obtain final dimension and weld appearance. * May be involved with Supervisor and Drafting/Engineering when corrective action is required because of non-conformities or drawing errors. * Where products are repetitive, may fabricate and construct fixtures, position riqs and their devices to expedite production. * Uses an assortment of measuring tools such as straight edge, tape, welding gauges, etc. to ensure proper weld dimensions * Consistently meets customer's quality requirements and expectations. 2. Follow instructions - oral and/or written * Can properly read all blueprint and work instructions * Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. * Performs other duties as assigned by the Production Supervisor, or his/her designate. 3. Safety & housekeeping * Work may require use of scaffold, ladders, forklift, and/or scissor lift. * Work may require the use of a crane or hoist to move part. * Maintains a clean work area with no clutter. * Practices safety at all times while at work. * Follows safety policies and procedures and speaks up when others are non-compliant. * Wears all safety equipment for area of work. 4. Continual Improvement suggestions * Keeps an open mind to others continuous improvement suggestions * Bring continuous improvement suggestions to the appropriate team member. 5. Professional Development * Demonstrates initiative, positive attitude, and enthusiasm for the job * Will follow up with supervisor on professional development goals and opportunities * Takes an interest and lets it be known that they have a desire to grow with the company Requirements Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training * High school Diploma/GED * BOCES or trade school or its equivalent in on the job training Experience: * Knowledge of welding * Competent in use of material handling equipment Other: * Must be willing to work overtime as required. Skills: To perform the job successfully, an individual should demonstrate the following competencies: * Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. * Strong organization and time management skills. * High attention to detail. * Demonstrate behavior consistent with company values. * Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. * Exhibits polite and professional communication via phone, e-mail and mail. * Maintain strict confidentiality regarding company matters. * Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. * Maintain a collaborative relationship with internal and external stakeholders. * Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. * Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. * Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. * Adheres to safety and regulatory program requirements, policies, and procedures; promptly reports safety/health concerns; utilizes personal protective equipment as required; maintains organized, clean work environment. * Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. * Ability to thrive in a team environment. Physical and Mental Demands: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. * Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. * Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration.

This position includes enrollment in our 20-week, Arc & Flame Training Program in Rochester, NY. The $11,000 training cost is covered. Compensation and benefits begin at the start of your training date. Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production Supervisor, Weld Shop or his/her designate. Key Results Areas by level of work Level I: Quality - Complete and accurate work performed efficiently 1. Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed * Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly. * Investigates special welding instructions to conform to Quality Assurance requirements. * Slag work; examines weld for size of bead, penetration and quality continuous code welding and testing. * Visually examines completed weld for size of bead, penetration and quality. * Understand and work with complicated standards or special structures and weldments involving a number of parts and details, using clamp, tack weld, jigs, fixtures, and turning rigs. * In preparation of surfaces to be welded, will use a variety of tools such as grinder, chippers and arc gouging equipment. * Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories. * Uses an assortment of measuring tools such as straight edge, tape, welding gauges, etc. to ensure proper weld dimensions * Consistently meets customer's quality requirements and expectations. 2. Follow instructions - oral and/or written * Can properly read all blueprint and work instructions * Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. * Performs other duties as assigned by the Production Supervisor, weld shop, or his/her designate. 3. Safety & housekeeping * Work may require use of scaffold, ladders, forklift, and/or scissor lift. * Work may require the use of a crane to move part. * Maintains a clean work area with no clutter. * Practices safety at all times while at work. * Follows safety policies and procedures and speaks up when others are non-compliant. * Wears all safety equipment for area of work. 4. Continual Improvement suggestions * Keeps an open mind to others continuous improvement suggestions * Bring continuous improvement suggestions to the appropriate team member. 5. Professional Development * Demonstrates initiative, positive attitude, and enthusiasm for the job * Will follow up with supervisor on professional development goals and opportunities * Takes an interest and lets it be known that they have a desire to grow with the company Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training * Technical Trades School in Welding * High school GED Required Experience: * 1+ years of welding experience. Other: * Must be willing to work overtime as required. * Minimal travel may be required Skills: To perform the job successfully, an individual should demonstrate the following competencies: 1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. 2. Strong organization and time management skills. 3. High attention to detail. 4. Demonstrate behavior consistent with company values. 5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. 6. Exhibits polite and professional communication via phone, e-mail and mail. 7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. 8. Maintain a collaborative relationship with internal and external stakeholders. 9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. 10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. 11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. 12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. 13. Ability to thrive in a team environment. Physical and Mental Demands The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. * Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. * Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Work Authorization Must be able to work in the U.S without sponsorship. Salary Description $21.62/hr