Assembler jobs at EBW Electronics - 167 jobs

Essential Duties & Responsibilities Assemble machine bases, frames, guards, and sub‑assemblies for paper converting and packaging equipment. Install electrical components such as motors, sensors, photo eyes, drives, servo systems, PLC panels, HMI units, relays, and safety devices. Lay out and route wiring for control cabinets and machine‑mounted junction boxes according to diagrams and specifications. Drill, tap, and prepare surfaces for mounting components on converting and packaging machinery. Install pneumatic lines, valves, regulators, and cylinders used in packaging systems. Cut, strip, bend, and terminate wire and conduit for machine wiring and control system integration. Connect color‑coded and labeled wires accurately, including in compact machine spaces. Solder connections and crimp terminals following quality standards. Assist with mechanical assembly, including alignment of rollers, tension systems, knife assemblies, belts, guides, and guarding. Perform functional tests and basic troubleshooting of electrical and mechanical assemblies. Review drawings and work orders, reporting discrepancies to engineers or supervisors. Maintain accurate inventory usage through production orders. Safely operate hand tools, power tools, measurement devices, and electrical test equipment. Read and interpret tape measures, blueprints, and wiring diagrams. Safety Responsibilities Follow all company safety policies, procedures, and PPE requirements. Maintain a clean, organized, and hazard-free work area. Use lockout/tagout procedures when working on powered or energized equipment. Inspect tools and equipment before use, reporting unsafe conditions immediately. Follow established electrical safety practices when wiring or testing equipment. Participate in safety training, audits, and toolbox talks. Report incidents, near misses, and safety concerns to supervision. Promote a safety‑first culture and encourage safe behavior among team members. Training Responsibilities Participate in onboarding and skills‑based training required for assembly tasks. Maintain up‑to‑date knowledge of assembly procedures, safety practices, and equipment standards. Support the training of new Assemblers or temporary workers by demonstrating proper techniques and safe work practices when requested. Assist in cross‑training efforts within the assembly department to build team flexibility and skill coverage. Provide feedback to supervisors or engineers regarding unclear work instructions, training needs, or process improvements. Qualifications Preferred Knowledge & Skills: Experience with industrial machinery, especially packaging or converting equipment Ability to read mechanical and electrical blueprints Familiarity with wiring PLC‑controlled equipment Basic understanding of pneumatic and machine safety devices Strong mechanical aptitude and problem‑solving skills Physical Demands Standing, walking, bending, reaching, and performing physical assembly tasks Using hands for wiring, crimping, assembly, and tool operation Lifting or moving 50-80 pounds Working around moving mechanical components Vision requirements include close, distance, color, peripheral, and depth perception, and the ability to adjust focus. Work Environment Manufacturing environment with exposure to machinery, noise, oils, and related industrial conditions Temperature variations depending on season PPE required Ranpak is an equal opportunity employer and is committed to providing a workplace free from harassment and discrimination. We celebrate the unique differences of our employees because that is what drives curiosity, innovation, and the success of our business. Ranpak does not tolerate discrimination based on race, religion, color, national origin, gender, sexual orientation, gender identity or expression, age, marital status, veteran status, disability status, pregnancy, parental status, genetic information, political affiliation, or any other status protected by the laws or regulations in the locations where we operate. Accommodation is available for applicants with disabilities. This policy applies to all employment practices within our organization, including recruiting, hiring, promotion, termination, layoff, recall, leave of absence, compensation, benefits, and training. Ranpak makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description Essential Duties & Responsibilities Assemble machine bases, frames, guards, and sub‑assemblies for paper converting and packaging equipment. Install electrical components such as motors, sensors, photo eyes, drives, servo systems, PLC panels, HMI units, relays, and safety devices. Lay out and route wiring for control cabinets and machine‑mounted junction boxes according to diagrams and specifications. Drill, tap, and prepare surfaces for mounting components on converting and packaging machinery. Install pneumatic lines, valves, regulators, and cylinders used in packaging systems. Cut, strip, bend, and terminate wire and conduit for machine wiring and control system integration. Connect color‑coded and labeled wires accurately, including in compact machine spaces. Solder connections and crimp terminals following quality standards. Assist with mechanical assembly, including alignment of rollers, tension systems, knife assemblies, belts, guides, and guarding. Perform functional tests and basic troubleshooting of electrical and mechanical assemblies. Review drawings and work orders, reporting discrepancies to engineers or supervisors. Maintain accurate inventory usage through production orders. Safely operate hand tools, power tools, measurement devices, and electrical test equipment. Read and interpret tape measures, blueprints, and wiring diagrams. Safety Responsibilities Follow all company safety policies, procedures, and PPE requirements. Maintain a clean, organized, and hazard-free work area. Use lockout/tagout procedures when working on powered or energized equipment. Inspect tools and equipment after use, reporting unsafe conditions immediately. Follow established electrical safety practices when wiring or testing equipment. Participate in safety training, audits, and toolbox talks. Report incidents, near misses, and safety concerns to supervision. Promote a safety‑first culture and encourage safe behavior among team members. Training Responsibilities Participate in onboarding and skills‑based training required for assembly tasks. Maintain up‑to‑date knowledge of assembly procedures, safety practices, and equipment standards. Support the training of new Assemblers or temporary workers by demonstrating proper techniques and safe work practices when requested. Assist in cross‑training efforts within the assembly department to build team flexibility and skill coverage. Provide feedback to supervisors or engineers regarding unclear work instructions, training needs, or process improvements. Qualifications Preferred Knowledge & Skills: Experience with industrial machinery, especially packaging or converting equipment Ability to read mechanical and electrical blueprints Familiarity with wiring PLC‑controlled equipment Basic understanding of pneumatic and machine safety devices Strong mechanical aptitude and problem‑solving skills Physical Demands Standing, walking, bending, reaching, and performing physical assembly tasks Using hands for wiring, crimping, assembly, and tool operation Lifting or moving 50-80 pounds Working around moving mechanical components Vision requirements include close, distance, color, peripheral, and depth perception, and the ability to adjust focus. Work Environment Manufacturing environment with exposure to machinery, noise, oils, and related industrial conditions Temperature variations depending on season PPE required Ranpak is an equal opportunity employer and is committed to providing a workplace free from harassment and discrimination. We celebrate the unique differences of our employees because that is what drives curiosity, innovation, and the success of our business. Ranpak does not tolerate discrimination based on race, religion, color, national origin, gender, sexual orientation, gender identity or expression, age, marital status, veteran status, disability status, pregnancy, parental status, genetic information, political affiliation, or any other status protected by the laws or regulations in the locations where we operate. Accommodation is available for applicants with disabilities. This policy applies to all employment practices within our organization, including recruiting, hiring, promotion, termination, layoff, recall, leave of absence, compensation, benefits, and training. Ranpak makes hiring decisions based solely on qualifications, merit, and business needs at the time.

requires the assembly of components that make up the product line of SGL CARBON TECHNIC. Product line includes items such as heat exchanger and parts (tube sheets, headers, baffles), systems and parts (trays, cylinders). Strong blue-print reading skills are required, as well as experience in working with basic tooling (i.e.. torque wrenches) and measuring equipment (i.e. micrometers, gauges). Good communication skills with the other assemblers, machinists, and engineering group are also required. Key Accountabilities Ability to do standard shop mathematics Ability to read and understand all facets of detailed blueprints Ability to read and understand required measuring equipment such as micrometers, gauges, torque wrenches Strong mechanical aptitude Ability to follow working detail drawings as designed General maintenance of tools and equipment Safety conscious with safety training background. Your Profile High School diploma 3 years of experience in a fabrication facility Preferred experience with pressurized equipment and welded vessels Ability to work with little supervision as part of a team Ability to communicate verbally and in writing with others regarding technical issues Ability to work with shop, management, and technical personnel Ability to communicate drawing and dimensional issues to staff and employees Working knowledge of Microsoft Office software and pc file management. PHYSICAL DEMANDS Stand, walk, reach with hands and arms, stoop, kneel, crouch, bend, lift, push, pull, talk, hear, close and distance vision, depth and peripheral perception; lift up to 50 lbs. #CB1

Job Description We are a technology-based and a global leader in the development and manufacture of carbon-based solutions. Our materials and products made from specialty graphite, carbon fibers and composites serve many industries that are shaping the trends of the future: climate friendly mobility, semiconductor technology, LED, solar and wind energy. We also develop solutions for the chemical sector and numerous industrial applications that are both forward-looking and reliable. We are driven to grow with products and technologies that benefit society and reduce environmental impact. With around 4,700 employees at 29 sites in Europe, North America and Asia, we generated sales of 1,0 billion euros in fiscal 2024. Welcome to the Strongsville Site! Strongsville, located in a suburb of Cleveland, Ohio, is part of the Process Technology Business Unit providing customer Process Equipment in chemical applications located in North, Central and South America. The Strongsville team designs and machines, fabricates and assembles the Process Equipment which includes Shell and Tube Heat Exchangers, Block Heat Exchangers, Plate Heat Exchangers, Pumps, Columns, Quenches and Systems. Assembler Position Summary This position requires the assembly of components that make up the product line of SGL CARBON TECHNIC. Product line includes items such as heat exchanger and parts (tube sheets, headers, baffles), systems and parts (trays, cylinders). Strong blue-print reading skills are required, as well as experience in working with basic tooling (i.e. torque wrenches) and measuring equipment (i.e. micrometers, gauges). Good communication skills with the other assemblers, machinists, and engineering groups are also required. Key Accountabilities • Ability to do standard shop mathematics • Ability to read and understand all facets of detailed blueprints • Ability to read and understand required measuring equipment such as micrometers, gauges, torque wrenches • Strong mechanical aptitude • Ability to follow working detail drawings as designed • General maintenance of tools and equipment • Safety conscious with safety training background. Your Profile • High School diploma • 3 years of experience in a fabrication facility • Preferred experience with pressurized equipment and welded vessels • Ability to work with little supervision as part of a team • Ability to communicate verbally and in writing with others regarding technical issues • Ability to work with shop, management, and technical personnel • Ability to communicate drawing and dimensional issues to staff and employees • Working knowledge of Microsoft Office software and pc file management. PHYSICAL DEMANDS Stand, walk, reach with hands and arms, stoop, kneel, crouch, bend, lift, push, pull, talk, hear, close and distance vision, depth and peripheral perception; lift up to 50 lbs. Company DescriptionWe are a technology-based and a global leader in the development and manufacture of carbon-based solutions. Our materials and products made from specialty graphite, carbon fibers and composites serve many industries that are shaping the trends of the future: climate friendly mobility, semiconductor technology, LED, solar and wind energy. We also develop solutions for the chemical sector and numerous industrial applications that are both forward-looking and reliable. We are driven to grow with products and technologies that benefit society and reduce environmental impact. With around 4,700 employees at 29 sites in Europe, North America and Asia, we generated sales of 1,0 billion euros in fiscal 2024.Company DescriptionWe are a technology-based and a global leader in the development and manufacture of carbon-based solutions. Our materials and products made from specialty graphite, carbon fibers and composites serve many industries that are shaping the trends of the future: climate friendly mobility, semiconductor technology, LED, solar and wind energy. We also develop solutions for the chemical sector and numerous industrial applications that are both forward-looking and reliable. We are driven to grow with products and technologies that benefit society and reduce environmental impact.\r \r With around 4,700 employees at 29 sites in Europe, North America and Asia, we generated sales of 1,0 billion euros in fiscal 2024.

Enprotech Industrial Technologies is a team of passionate people, with can-do attitudes who act safely and with urgency and passion to provide high value and innovative solutions to our customers. We are the largest supplier of repair, rebuilding, and field services for the metal forming and steel industry in North America. Our facilities are equipped to provide our customers with exceptional engineering, machining, welding, fabrication and machine assembly and disassembly capabilities. Position Summary & Objective Assembles products according to customer's requirements. Assembles and fits components according to assembly blueprints, manuals, engineering memos, sketches, and knowledge of machine construction to construct, rebuild, and repair machines and equipment using hand tools and power tools. Essential Functions Performed by the Position Creates plans for the disassembly and repair per the assembly procedures, following specifications provided and using knowledge gained by experience. Verifies conformance of parts to stock list and blueprints using measuring instruments such as calipers, gauges, and micrometers. Inspect parts to quality standards. Aligns components for assembly, manually or with a crane. Removes high spots and smooths surfaces using chisels, scrapers, files, and powered hand grinder. Assemble, set up, and operates machines to verify functionality, machine capabilities, and conformance to customer's specifications. Form, bend, and fasten piping, fixtures, and attachments required to provide the machine with air, water, and oil. May bend and install pipe for hydraulic systems. Verifies alignment and tolerances of moving parts using measuring instruments such as dial indicators and micrometers. Installs moving parts such as shafts, levers, or bearings, and works them to test free movement and operation of assembly by hand. Test or assist in testing operation of completed product. Align and mesh gears in gearbox to assemble system of gears. Mounts and connects auxiliary, mechanical, electrical, electronic, pneumatic, or hydraulic equipment. Cuts and fits pipes and tubing. Test, or assist in testing, operation of completed product. Knowledge, Skills, and Abilities Solid mechanical skills. Must have mechanical ability to proficiently use cranes and other heavy tools and equipment that are normally required in daily assembly and disassembly operations. Must own tools of the trade, and be able to use them effectively. Ability to use judgment to plan, perform, and make decisions as to the sequence of operations and processes within the limitations of established or standard methods and procedures. Must be able to interpret prints well enough to determine appropriate disassembly sequence for a variety of heavy equipment. Ability to read, interpret a variety of assembly prints, and understand verbal and written instructions. Capable of using small machine tools, drill presses, welders, cranes, and forklifts. Basic computer skills and the ability to use basic shop math. Ability to verbally communicate with team members, supervisors, and engineers. Possess the physical strength and ability to safely handle heavy equipment and tools. Ability to bend tubing, lube, hydraulics, and pneumatics. Qualifications Required Education and Experience A high school diploma or equivalent. 3-5 years' experience in mechanical assembly and disassembly. Environment and Working Conditions Shop environment. Travel Requirements (percent) Up to 10% Shift: 1st Shift - 6:30 am-5:00 pm Disclaimer This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Additional Information The benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: health coverage for you and your family through medical, dental and vision plans a 401(k) plan in with a generous company match financial protection through disability, life, and accidental death & dismemberment insurance plans tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars a generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #IND1 Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

Enprotech Industrial Technologies is a team of passionate people, with can-do attitudes who act safely and with urgency and passion to provide high value and innovative solutions to our customers. We are the largest supplier of repair, rebuilding, and field services for the metal forming and steel industry in North America. Our facilities are equipped to provide our customers with exceptional engineering, machining, welding, fabrication and machine assembly and disassembly capabilities. Position Summary & Objective Assembles products according to customer's requirements. Assembles and fits components according to assembly blueprints, manuals, engineering memos, sketches, and knowledge of machine construction to construct, rebuild, and repair machines and equipment using hand tools and power tools. Essential Functions Performed by the Position * Creates plans for the disassembly and repair per the assembly procedures, following specifications provided and using knowledge gained by experience. * Verifies conformance of parts to stock list and blueprints using measuring instruments such as calipers, gauges, and micrometers. Inspect parts to quality standards. * Aligns components for assembly, manually or with a crane. * Removes high spots and smooths surfaces using chisels, scrapers, files, and powered hand grinder. Assemble, set up, and operates machines to verify functionality, machine capabilities, and conformance to customer's specifications. * Form, bend, and fasten piping, fixtures, and attachments required to provide the machine with air, water, and oil. May bend and install pipe for hydraulic systems. * Verifies alignment and tolerances of moving parts using measuring instruments such as dial indicators and micrometers. * Installs moving parts such as shafts, levers, or bearings, and works them to test free movement and operation of assembly by hand. Test or assist in testing operation of completed product. * Align and mesh gears in gearbox to assemble system of gears. * Mounts and connects auxiliary, mechanical, electrical, electronic, pneumatic, or hydraulic equipment. Cuts and fits pipes and tubing. * Test, or assist in testing, operation of completed product. Knowledge, Skills, and Abilities * Solid mechanical skills. Must have mechanical ability to proficiently use cranes and other heavy tools and equipment that are normally required in daily assembly and disassembly operations. * Must own tools of the trade, and be able to use them effectively. * Ability to use judgment to plan, perform, and make decisions as to the sequence of operations and processes within the limitations of established or standard methods and procedures. * Must be able to interpret prints well enough to determine appropriate disassembly sequence for a variety of heavy equipment. * Ability to read, interpret a variety of assembly prints, and understand verbal and written instructions. * Capable of using small machine tools, drill presses, welders, cranes, and forklifts. * Basic computer skills and the ability to use basic shop math. * Ability to verbally communicate with team members, supervisors, and engineers. * Possess the physical strength and ability to safely handle heavy equipment and tools. * Ability to bend tubing, lube, hydraulics, and pneumatics. Qualifications Required Education and Experience * A high school diploma or equivalent. * 3-5 years' experience in mechanical assembly and disassembly. Environment and Working Conditions * Shop environment. Travel Requirements (percent) * Up to 10% Shift: 1st Shift - 6:30 am-5:00 pm Disclaimer This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Additional Information The benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: * health coverage for you and your family through medical, dental and vision plans * a 401(k) plan in with a generous company match * financial protection through disability, life, and accidental death & dismemberment insurance plans * tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars * a generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #IND1 Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

Enprotech Industrial Technologies is a team of passionate people, with can-do attitudes who act safely and with urgency and passion to provide high value and innovative solutions to our customers. We are the largest supplier of repair, rebuilding, and field services for the metal forming and steel industry in North America. Our facilities are equipped to provide our customers with exceptional engineering, machining, welding, fabrication and machine assembly and disassembly capabilities. Position Summary & Objective Assembles products according to customer's requirements. Assembles and fits components according to assembly blueprints, manuals, engineering memos, sketches, and knowledge of machine construction to construct, rebuild, and repair machines and equipment using hand tools and power tools. Essential Functions Performed by the Position Creates plans for the disassembly and repair per the assembly procedures, following specifications provided and using knowledge gained by experience. Verifies conformance of parts to stock list and blueprints using measuring instruments such as calipers, gauges, and micrometers. Inspect parts to quality standards. Aligns components for assembly, manually or with a crane. Removes high spots and smooths surfaces using chisels, scrapers, files, and powered hand grinder. Assemble, set up, and operates machines to verify functionality, machine capabilities, and conformance to customer's specifications. Form, bend, and fasten piping, fixtures, and attachments required to provide the machine with air, water, and oil. May bend and install pipe for hydraulic systems. Verifies alignment and tolerances of moving parts using measuring instruments such as dial indicators and micrometers. Installs moving parts such as shafts, levers, or bearings, and works them to test free movement and operation of assembly by hand. Test or assist in testing operation of completed product. Align and mesh gears in gearbox to assemble system of gears. Mounts and connects auxiliary, mechanical, electrical, electronic, pneumatic, or hydraulic equipment. Cuts and fits pipes and tubing. Test, or assist in testing, operation of completed product. Knowledge, Skills, and Abilities Solid mechanical skills. Must have mechanical ability to proficiently use cranes and other heavy tools and equipment that are normally required in daily assembly and disassembly operations. Must own tools of the trade, and be able to use them effectively. Ability to use judgment to plan, perform, and make decisions as to the sequence of operations and processes within the limitations of established or standard methods and procedures. Must be able to interpret prints well enough to determine appropriate disassembly sequence for a variety of heavy equipment. Ability to read, interpret a variety of assembly prints, and understand verbal and written instructions. Capable of using small machine tools, drill presses, welders, cranes, and forklifts. Basic computer skills and the ability to use basic shop math. Ability to verbally communicate with team members, supervisors, and engineers. Possess the physical strength and ability to safely handle heavy equipment and tools. Ability to bend tubing, lube, hydraulics, and pneumatics. Qualifications Required Education and Experience A high school diploma or equivalent. 3-5 years' experience in mechanical assembly and disassembly. Environment and Working Conditions Shop environment. Travel Requirements (percent) Up to 10% Shift: 1st Shift - 6:30 am-5:00 pm Disclaimer This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Additional Information The benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: health coverage for you and your family through medical, dental and vision plans a 401(k) plan in with a generous company match financial protection through disability, life, and accidental death & dismemberment insurance plans tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars a generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #IND1 Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

Assemblers play a crucial role in building and assembling products, ensuring quality standards are met. This position requires attention to detail, manual dexterity, and a commitment to safety and efficiency in a fast-paced manufacturing environment. Assemblers collaborate closely with team members to meet production goals and uphold the company's reputation for exceptional product quality. Delivering outstanding customer value starts on the production floor with skilled craftsmanship and pride in the work. ESSENTIAL JOB FUNCTIONS Perform various stages of the assembly process to build high-quality products according to specifications and production schedules. Operate hand tools and power tools safely and effectively to assemble components and subassemblies. Conduct visual and functional inspections to ensure products meet quality standards before moving to the next production phase. Follow safety protocols and maintain a clean, organized work area to promote a safe and efficient manufacturing environment. Assist with material handling tasks, including receiving, moving, and staging parts and finished goods as needed. Participate in regular physical inventory counts and report discrepancies to supervisors. Collaborate with team members and supervisors to meet daily production targets and resolve issues that impact workflow. Perform repetitive physical tasks including lifting, bending, pushing, and standing for extended periods while maintaining attention to detail. Report equipment malfunctions or quality issues promptly and support continuous improvement initiatives within the production area. This job description is not designed to cover or contain a comprehensive listing of the required activities, duties, or responsibilities of the team member. Duties, obligations, and activities may change, or new ones may be assigned at any time with or without notice. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. LEADERSHIP COMPETENCY MODEL This role requires the demonstration of the following competencies: Instills Trust | Communicates Effectively | Demonstrates Customer Focus | Takes Initiative | Makes Quality Decisions | Drives Growth | Ensures Accountability | Drives Results KNOWLEDGE, SKILLS, AND ABILITIES Knowledge of safe and effective use of power tools and hand tools, including screw guns and related assembly equipment. Skill in accurately reading and interpreting measurements using tape measures and other basic measuring instruments. Ability to quickly learn and adapt to new assembly processes, tools, and techniques as required. Ability to work collaboratively in a team-oriented environment to meet production goals and maintain quality standards. Ability to perform tasks in various work areas and adapt to changing priorities within the manufacturing environment. Skill in maintaining strong attention to detail to ensure accuracy and quality in assembly work. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. WORK ENVIRONMENT AND PHYSICAL DEMANDS The work environment requires standing for the entire shift and performing repetitive movements throughout the day. The role involves physical demands such as lifting, pulling, pushing, and moving materials weighing up to 50 pounds, as well as frequent bending and other ergonomic activities. Assemblers must be able to maintain productivity while managing these physical tasks safely and efficiently. PLANNED BUSINESS TRAVEL This job requires no planned business travel. EDUCATION AND EXPERIENCE High School diploma or equivalent is required. Associate or bachelor's degree, preferred. Combining experience in manufacturing, warehouse, and assembly practices of 6 months or more with education is desirable. Previous experience with manufacturing, warehouse, and assembly is desired. EEO STATEMENT DuraServ is an equal-opportunity employer. We prohibit discrimination and afford equal employment opportunities to team members and applicants without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Our EEO policy applies to all aspects of the relationship between DuraServ and its team members, including recruitment, employment, promotion, transfer, training, working conditions, compensation, benefits, and application of policies.

At National Machinery we take pride in our skilled workforce and are continuously seeking eager individuals to join our innovative team. National Machinery is a world-class middle market company that designs and manufactures cold forming machinery. It takes many dedicated positions to make our global company excel as an industry leader in the metal forming market. If you are interested in pursuing a career with a company that is well capitalized and privately held by an ownership group that is focused on long term growth, please consider applying. EEO/M/F/D/V FIELD SERVICE ASSEMBLER Assembly of components to build complex machines from the ground up into finished product, following instructions, drawings, blueprints, and specifications. Inspection of own work to ensure safety, quality, and proper functionality of equipment. Disassembly and inspection of legacy equipment in support of customer rebuild projects to like new condition. Perform field service calls to customers' facilities, including troubleshooting, consultation, and mechanical repair. Our field service staff is highly respected by our customers, and our representatives must present themselves professionally in person as well as in written communications. Field service representatives also play a key role in identifying sales opportunities for parts, service, repairs, and upgrades. MINIMUM QUALIFICATIONS 2+ years mechanical experience or related vocational education Must have a strong safety orientation and maintain consistent safety consciousness Self-motivated and can follow instruction and retain training and information to be able to repeat duties without supervision Must be quality focused and detail oriented, able to actively participate and work in a team environment to maintain schedules and efficiency Strong mechanical and mathematical skills, with an understanding of engineering drawings and schematics, ability to follow detailed work instructions Knowledge in the use of manual and powered hand tools, powered equipment, precision measuring devices and cutting tools Ability to speak and communicate clearly both verbally and in writing Basic computer skills to log time and provide briefings on current builds or customer service visits Neat and professional appearance always maintained Customer service mentality to enhance our customers confidence in our company Ability to work and make decisions independently when in customer's facility Perform other duties and projects as assigned PREFERRED QUALIFICATIONS Valid driver's license and driving record that allows insurability under company's policy Familiarity with Windows programs and Microsoft office tools Ability to obtain a passport for overseas travel as international travel may be requested WORK ENVIRONMENT/PHYSICAL DEMANDS Shop environment, steel-toed safety shoes and safety glasses required Additional Training and Personal Protective Equipment (PPE) will be required and provided by National Machinery related to specific tasks Must be able to regularly lift, push & pull loads of up to 50 pounds on a regular basis Work can be strenuous, and includes walking, climbing, kneeling, crawling, squatting, and pulling (such as on torque wrenches) as well as standing for long periods of time Overnight travel to customer facilities, knowledge of and adherence to customer site safety regulations is mandatory SCHEDULE Standard 8-hour shifts, 150% paid anytime over 8 hours daily, hours over 45 in a week are paid as double time Shift availability, standard schedules shown below First Shift 7:00 AM - 3:30 PM, Monday - Friday Second Shift 3:30 PM - 12:00 AM, Monday - Friday + 12.5% Shift Premium Third Shift 11:00 PM - 7:00 AM, Sunday - Thursday + 7.5% Shift Premium\\ BENEFITS 401k Match Paid Sick Leave 3 Personal No-Pay Days Health, Dental and Vision Plans Available Employer Paid Life Insurance Employee Recreation and Exercise Room

FUNCTION: Performs mechanical assembly work with varying degrees of complexity. Assembly procedures may involve adjusting, trimming and fitting parts to moderately close tolerances, working with parts or components which are difficult to handle and other skills which require good dexterity and facility in the use of a variety of hand tools. KEY RESULT AREAS: Parts are assembled according to specifications and standard shop practices. Parts are consistently handled and protected properly and safely. Work standards are consistently met and improved. Wasted effort and material is constantly sought and eliminated. Constantly seeks additional work to ensure high levels of productivity are achieved. Duties are constantly performed in a safe manner to ensure compliance with safety specifications. DUTIES AND RESPONSIBILITIES: Analyzes assembly blueprint and specifications manual. Verifies conformance of parts to stock list and blueprints, using measuring instruments such as calipers, gauges and micrometers. Lays out hole locations and drills tap holes on parts for assembly. Aligns components for assembly, manually or with hoist, and bolts, screws, dowels, welds or rivets parts together using hand tools. Removes high spots and smoothes surfaces using chisels, scrapers, files and powered hand grinder. Verifies alignment and tolerances of moving parts using measuring instruments such as dial indicators and thickness gauge. Test operation of assembly by hand. DESIRABLE KNOWLEDGE/EDUCATION: High School diploma or equivalent required. Demonstrated mechanical aptitude. Must be a US citizen. DESIRABLE EXPERIENCE/SKILL: Minimum one-year related experience and/or training in applications of entry level mechanical aptitude. Experience in heavy mechanical assembly function. RELATIONSHIPS: Develops close working relationships with other assemblers, material handlers, and quality control personnel. Demonstrates a highly cooperative demeanor with other employees and willingly takes the initiative to help others succeed. JOB ENVIRONMENT: Works in a large-scale manufacturing facility environment specifically designed for heavy naval equipment assembly. Environment includes overhead cranes rated for multi-ton loads, specialized lifting equipment, and expansive assembly bays. Regular exposure to hydraulic fluids, industrial lubricants, electrical components, and metal fabrication debris. High noise levels from heavy machinery, pneumatic tools, and crane operations. Temperature-controlled facility though work areas may experience heat from large electrical components during testing phases. Work performed under strict Navy specifications and military standards including NAVSEA requirements. May involve working with classified materials. PHYSICAL REQUIREMENTS: Must be able to stand and walk on concrete floors for full 10-12 hour shifts while working around massive equipment. Requires ability to safely work at various heights using scaffolding, elevated platforms, and man-lifts when accessing different levels of large generator assemblies. Ability to lift and maneuver components weighing up to 50-75 pounds with team lifting required for heavier sub-assemblies. Extensive climbing, crawling, and working in tight spaces within and around large generator housings. Manual dexterity essential for electrical connections, precision bolt torquing, and intricate component installation. Good balance and spatial awareness critical when working on elevated platforms around heavy suspended loads. Ability to work in awkward positions including overhead work, tight clearances, and cramped internal spaces within generator enclosures. ADDITIONAL CONSIDERATIONS: Must demonstrate ability to work safely around heavy machinery and suspended loads exceeding 100,000 pounds. Position requires strict adherence to crane safety protocols and lock-out/tag-out procedures for high-voltage electrical systems. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

FUNCTION: Performs mechanical assembly work with varying degrees of complexity. Assembly procedures may involve adjusting, trimming and fitting parts to moderately close tolerances, working with parts or components which are difficult to handle and other skills which require good dexterity and facility in the use of a variety of hand tools. KEY RESULT AREAS: Parts are assembled according to specifications and standard shop practices. Parts are consistently handled and protected properly and safely. Work standards are consistently met and improved. Wasted effort and material is constantly sought and eliminated. Constantly seeks additional work to ensure high levels of productivity are achieved. Duties are constantly performed in a safe manner to ensure compliance with safety specifications. DUTIES AND RESPONSIBILITIES: Analyzes assembly blueprint and specifications manual. Verifies conformance of parts to stock list and blueprints, using measuring instruments such as calipers, gauges and micrometers. Lays out hole locations and drills tap holes on parts for assembly. Aligns components for assembly, manually or with hoist, and bolts, screws, dowels, welds or rivets parts together using hand tools. Removes high spots and smoothes surfaces using chisels, scrapers, files and powered hand grinder. Verifies alignment and tolerances of moving parts using measuring instruments such as dial indicators and thickness gauge. Test operation of assembly by hand. DESIRABLE KNOWLEDGE/EDUCATION: High School diploma or equivalent required. Demonstrated mechanical aptitude. Must be a US citizen. DESIRABLE EXPERIENCE/SKILL: Minimum one-year related experience and/or training in applications of entry level mechanical aptitude. Experience in heavy mechanical assembly function. RELATIONSHIPS: Develops close working relationships with other assemblers, material handlers, and quality control personnel. Demonstrates a highly cooperative demeanor with other employees and willingly takes the initiative to help others succeed. JOB ENVIRONMENT: Works in a large-scale manufacturing facility environment specifically designed for heavy naval equipment assembly. Environment includes overhead cranes rated for multi-ton loads, specialized lifting equipment, and expansive assembly bays. Regular exposure to hydraulic fluids, industrial lubricants, electrical components, and metal fabrication debris. High noise levels from heavy machinery, pneumatic tools, and crane operations. Temperature-controlled facility though work areas may experience heat from large electrical components during testing phases. Work performed under strict Navy specifications and military standards including NAVSEA requirements. May involve working with classified materials. PHYSICAL REQUIREMENTS: Must be able to stand and walk on concrete floors for full 10-12 hour shifts while working around massive equipment. Requires ability to safely work at various heights using scaffolding, elevated platforms, and man-lifts when accessing different levels of large generator assemblies. Ability to lift and maneuver components weighing up to 50-75 pounds with team lifting required for heavier sub-assemblies. Extensive climbing, crawling, and working in tight spaces within and around large generator housings. Manual dexterity essential for electrical connections, precision bolt torquing, and intricate component installation. Good balance and spatial awareness critical when working on elevated platforms around heavy suspended loads. Ability to work in awkward positions including overhead work, tight clearances, and cramped internal spaces within generator enclosures. ADDITIONAL CONSIDERATIONS: Must demonstrate ability to work safely around heavy machinery and suspended loads exceeding 100,000 pounds. Position requires strict adherence to crane safety protocols and lock-out/tag-out procedures for high-voltage electrical systems. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

FUNCTION: Performs mechanical assembly work with varying degrees of complexity. Assembly procedures may involve adjusting, trimming and fitting parts to moderately close tolerances, working with parts or components which are difficult to handle and other skills which require good dexterity and facility in the use of a variety of hand tools. KEY RESULT AREAS: * Parts are assembled according to specifications and standard shop practices. * Parts are consistently handled and protected properly and safely. * Work standards are consistently met and improved. * Wasted effort and material is constantly sought and eliminated. * Constantly seeks additional work to ensure high levels of productivity are achieved. * Duties are constantly performed in a safe manner to ensure compliance with safety specifications. DUTIES AND RESPONSIBILITIES: * Analyzes assembly blueprint and specifications manual. * Verifies conformance of parts to stock list and blueprints, using measuring instruments such as calipers, gauges and micrometers. * Lays out hole locations and drills tap holes on parts for assembly. * Aligns components for assembly, manually or with hoist, and bolts, screws, dowels, welds or rivets parts together using hand tools. * Removes high spots and smoothes surfaces using chisels, scrapers, files and powered hand grinder. * Verifies alignment and tolerances of moving parts using measuring instruments such as dial indicators and thickness gauge. * Test operation of assembly by hand. DESIRABLE KNOWLEDGE/EDUCATION: * High School diploma or equivalent required. * Demonstrated mechanical aptitude. * Must be a US citizen. DESIRABLE EXPERIENCE/SKILL: * Minimum one-year related experience and/or training in applications of entry level mechanical aptitude. * Experience in heavy mechanical assembly function. RELATIONSHIPS: * Develops close working relationships with other assemblers, material handlers, and quality control personnel. * Demonstrates a highly cooperative demeanor with other employees and willingly takes the initiative to help others succeed. JOB ENVIRONMENT: * Works in a large-scale manufacturing facility environment specifically designed for heavy naval equipment assembly. * Environment includes overhead cranes rated for multi-ton loads, specialized lifting equipment, and expansive assembly bays. * Regular exposure to hydraulic fluids, industrial lubricants, electrical components, and metal fabrication debris. * High noise levels from heavy machinery, pneumatic tools, and crane operations. * Temperature-controlled facility though work areas may experience heat from large electrical components during testing phases. * Work performed under strict Navy specifications and military standards including NAVSEA requirements. * May involve working with classified materials. PHYSICAL REQUIREMENTS: * Must be able to stand and walk on concrete floors for full 10-12 hour shifts while working around massive equipment. * Requires ability to safely work at various heights using scaffolding, elevated platforms, and man-lifts when accessing different levels of large generator assemblies. * Ability to lift and maneuver components weighing up to 50-75 pounds with team lifting required for heavier sub-assemblies. * Extensive climbing, crawling, and working in tight spaces within and around large generator housings. * Manual dexterity essential for electrical connections, precision bolt torquing, and intricate component installation. * Good balance and spatial awareness critical when working on elevated platforms around heavy suspended loads. * Ability to work in awkward positions including overhead work, tight clearances, and cramped internal spaces within generator enclosures. ADDITIONAL CONSIDERATIONS: * Must demonstrate ability to work safely around heavy machinery and suspended loads exceeding 100,000 pounds. * Position requires strict adherence to crane safety protocols and lock-out/tag-out procedures for high-voltage electrical systems. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Job DescriptionFUNCTION: Performs mechanical assembly work with varying degrees of complexity. Assembly procedures may involve adjusting, trimming and fitting parts to moderately close tolerances, working with parts or components which are difficult to handle and other skills which require good dexterity and facility in the use of a variety of hand tools. KEY RESULT AREAS: Parts are assembled according to specifications and standard shop practices. Parts are consistently handled and protected properly and safely. Work standards are consistently met and improved. Wasted effort and material is constantly sought and eliminated. Constantly seeks additional work to ensure high levels of productivity are achieved. Duties are constantly performed in a safe manner to ensure compliance with safety specifications. DUTIES AND RESPONSIBILITIES: Analyzes assembly blueprint and specifications manual. Verifies conformance of parts to stock list and blueprints, using measuring instruments such as calipers, gauges and micrometers. Lays out hole locations and drills tap holes on parts for assembly. Aligns components for assembly, manually or with hoist, and bolts, screws, dowels, welds or rivets parts together using hand tools. Removes high spots and smoothes surfaces using chisels, scrapers, files and powered hand grinder. Verifies alignment and tolerances of moving parts using measuring instruments such as dial indicators and thickness gauge. Test operation of assembly by hand. DESIRABLE KNOWLEDGE/EDUCATION: High School diploma or equivalent required. Demonstrated mechanical aptitude. Must be a US citizen. DESIRABLE EXPERIENCE/SKILL: Minimum one-year related experience and/or training in applications of entry level mechanical aptitude. Experience in heavy mechanical assembly function. RELATIONSHIPS: Develops close working relationships with other assemblers, material handlers, and quality control personnel. Demonstrates a highly cooperative demeanor with other employees and willingly takes the initiative to help others succeed. JOB ENVIRONMENT: Works in a large-scale manufacturing facility environment specifically designed for heavy naval equipment assembly. Environment includes overhead cranes rated for multi-ton loads, specialized lifting equipment, and expansive assembly bays. Regular exposure to hydraulic fluids, industrial lubricants, electrical components, and metal fabrication debris. High noise levels from heavy machinery, pneumatic tools, and crane operations. Temperature-controlled facility though work areas may experience heat from large electrical components during testing phases. Work performed under strict Navy specifications and military standards including NAVSEA requirements. May involve working with classified materials. PHYSICAL REQUIREMENTS: Must be able to stand and walk on concrete floors for full 10-12 hour shifts while working around massive equipment. Requires ability to safely work at various heights using scaffolding, elevated platforms, and man-lifts when accessing different levels of large generator assemblies. Ability to lift and maneuver components weighing up to 50-75 pounds with team lifting required for heavier sub-assemblies. Extensive climbing, crawling, and working in tight spaces within and around large generator housings. Manual dexterity essential for electrical connections, precision bolt torquing, and intricate component installation. Good balance and spatial awareness critical when working on elevated platforms around heavy suspended loads. Ability to work in awkward positions including overhead work, tight clearances, and cramped internal spaces within generator enclosures. ADDITIONAL CONSIDERATIONS: Must demonstrate ability to work safely around heavy machinery and suspended loads exceeding 100,000 pounds. Position requires strict adherence to crane safety protocols and lock-out/tag-out procedures for high-voltage electrical systems. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Job DescriptionFUNCTION:Performs mechanical assembly work with varying degrees of complexity. Assembly procedures may involve adjusting, trimming and fitting parts to moderately close tolerances, working with parts or components which are difficult to handle and other skills which require good dexterity and facility in the use of a variety of hand tools.KEY RESULT AREAS: Parts are assembled according to specifications and standard shop practices. Parts are consistently handled and protected properly and safely. Work standards are consistently met and improved. Wasted effort and material is constantly sought and eliminated. Constantly seeks additional work to ensure high levels of productivity are achieved. Duties are constantly performed in a safe manner to ensure compliance with safety specifications. DUTIES AND RESPONSIBILITIES: Analyzes assembly blueprint and specifications manual. Verifies conformance of parts to stock list and blueprints, using measuring instruments such as calipers, gauges and micrometers. Lays out hole locations and drills taps holes on parts for assembly. Aligns components for assembly, manually or with hoist, and bolts, screws, dowels, welds or rivets parts together using hand tools. Removes high spots and smoothes surfaces using chisels, scrapers, files and powered hand grinder. Verifies alignment and tolerances of moving parts using measuring instruments such as dial indicators and thickness gauge. Test operation of assembly by hand. DESIRABLE KNOWLEDGE/EDUCATION: High School diploma or equivalent required. Demonstrated mechanical aptitude. DESIRABLE EXPERIENCE/SKILL: Three to six months related experience and/or training in applications of entry level mechanical aptitude. RELATIONSHIPS: Develops close working relationship with other assemblers, material handlers, and quality control personnel. Demonstrates a highly cooperative demeanor with other employees and willingly takes the initiative to help others succeed. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. Powered by JazzHR cAzRZP24jK

FUNCTION:Performs mechanical assembly work with varying degrees of complexity. Assembly procedures may involve adjusting, trimming and fitting parts to moderately close tolerances, working with parts or components which are difficult to handle and other skills which require good dexterity and facility in the use of a variety of hand tools.KEY RESULT AREAS: Parts are assembled according to specifications and standard shop practices. Parts are consistently handled and protected properly and safely. Work standards are consistently met and improved. Wasted effort and material is constantly sought and eliminated. Constantly seeks additional work to ensure high levels of productivity are achieved. Duties are constantly performed in a safe manner to ensure compliance with safety specifications. DUTIES AND RESPONSIBILITIES: Analyzes assembly blueprint and specifications manual. Verifies conformance of parts to stock list and blueprints, using measuring instruments such as calipers, gauges and micrometers. Lays out hole locations and drills taps holes on parts for assembly. Aligns components for assembly, manually or with hoist, and bolts, screws, dowels, welds or rivets parts together using hand tools. Removes high spots and smoothes surfaces using chisels, scrapers, files and powered hand grinder. Verifies alignment and tolerances of moving parts using measuring instruments such as dial indicators and thickness gauge. Test operation of assembly by hand. DESIRABLE KNOWLEDGE/EDUCATION: High School diploma or equivalent required. Demonstrated mechanical aptitude. DESIRABLE EXPERIENCE/SKILL: Three to six months related experience and/or training in applications of entry level mechanical aptitude. RELATIONSHIPS: Develops close working relationship with other assemblers, material handlers, and quality control personnel. Demonstrates a highly cooperative demeanor with other employees and willingly takes the initiative to help others succeed. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Building the people that build the world. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We're a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. As part of the Engineered Air Movement group, Cincinnati Fan is a leading manufacturer of industrial fans and blowers for OEMs and industrial applications With its high attention to detail for products that are durable, energy efficient, and unparalleled in performance, companies rely on Cincinnati Fan to provide comfort and mission critical and industrial cooling solutions. How you will make an Impact (Job Summary) SPX is a diverse team of unique individuals who all make an impact. As an Assembler for Cincinnati Fan, you will assemble, test, and repair, industrial fans, blowers, and air-handling modules based on engineering drawings, blueprints, and work instructions. What you can expect in this role (Job Responsibilities) While each day brings new opportunities at SPX, your core responsibilities will be: Safety Follow all safety rules and adhere to core value of business. Maintain clean, orderly work areas and equipment (5s) Ensure proper and effective operation of equipment and tools. Report repairs and/or issues to team lead or supervisor. Quality Ensure all parts and surfaces are free from defects. Test, inspect, and adjust completed units for tolerances and quality. Identify and resolve inconsistences or issues during assembly. Monitor quality of own work and immediately report defective material, unusual conditions, and/or operating difficulties to team leaders or supervisor. Perform light maintenance on tools, equipment, machines, and other devices used in the normal course of the work performed. Delivery Ability to read work orders for correct assembly sequence. Operate hand and power tools (drills, grinders,) and precision measuring instruments (micrometers, calipers, torque wrenches, and screwdrivers) Assemble by hand, hand tools, portable power tools, or other equipment necessary to complete finished product. Coordinate staging and sequencing of parts, production items, and product components. Load/unload parts, items, and components using hand truck, pallet jacks, hoists, cranes, and other mechanical aids. Mark parts, attach nameplates, and document issues. Culture Desire to do the right thing Team player, assisting other team members and departments as needed with other duties not routine to position Punctual, on time, ready to work, every day What we are looking for (Experience, Knowledge, Skills, Abilities, Education) We each bring something to the table, and we are looking for someone who has: Required Experience Minimum one year experience in a manufacturing environment. Mechanically inclined. Experience with electro-mechanical equipment and electronic instruments helpful. Preferred Experience, Knowledge, Skills, and Abilities Positive attitude. Ability to communicate both verbally and written. Ability to follow instructions, work independently, and as a team. Attention to detail. Process improvement mindset. Safety oriented. Excellent attendance. Education & Certifications High school diploma or equivalent Valid driver's license Travel & Working Environment The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lifting to 50 pounds with assistance. Sitting, standing, walking, bending, grasping, pushing, pulling, crawling, climbing, twisting, reaching, and working at heights. Perform repetitive motions. Plant environment with potential exposure to bad weather, excessive heat/ cold, and/or excessive noise. How we live our culture Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX. What benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave Competitive health insurance plans and 401(k) match, with benefits starting day one Competitive and performance-based compensation packages and bonus plans Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion at SPX We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realize their fullest potential. SPX is an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation or identity, national origin, age, disability, veteran status, or any other legally protected basis.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Build precision components for advanced electronic systems!** Teledyne is seeking an Assembler to join our team in Miamisburg, OH. In this role, you'll assemble electronic components and subassemblies with accuracy and care, supporting critical applications in aerospace and defense. **What you'll do** + Position and align parts in specified relationships using fixtures or holding devices. + Perform intermediate assembly tasks such as soldering, bonding, epoxy application, curing, laser welding, and pneumatic machinery operation. + Install finished assemblies into cases and perform inline testing and inspection. + Mount components like resistors, capacitors, and integrated circuits; connect wires via soldering. + Adjust and trim materials to meet electrical or dimensional specifications. + Read and interpret schematics and blueprint drawings. + Cross-train on multiple programs and perform repair/rework operations. + Complete work under close supervision and follow detailed instructions. + Support intermittent overtime, typically on Fridays. **What you need** + High school diploma or equivalent (required). + 6-24 months of industrial experience or similar training (preferred). + Ability to read schematics and assembly prints; familiarity with wiring, welding, bonding, and soldering (preferred). + Ability to obtain IPC/J-STD Certification within 90 days of hire (required). + Intermediate computer skills (MS Office, Excel, Outlook). + Ability to obtain an ATF Possessor Permit. + Must be a U.S. Citizen due to Department of Energy requirements (required). **What we offer** + Competitive pay and comprehensive health benefits. + 4/10 work schedule (Mon-Thurs) with occasional Friday overtime. + Medical, dental, vision, and employee assistance programs. + Disability coverage and supplemental insurance options. + 401(k) with company match and employee stock purchase plan. + Paid time off, education assistance, and voluntary benefits like pet insurance. + A collaborative environment focused on precision and quality. **What happens next** Apply online through Teledyne's careers page. If your qualifications align, our team will contact you for interviews and guide you through the process. _Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Employment is contingent on background checks and compliance with applicable regulations._ Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** We are presently seeking an Assembler that will perform any combination of the following tasks to assemble electronic components, subassemblies, products or systems. **Schedule: 4/10 Mon-Thurs** **Location: Miamisburg, OH** **Essential Duties and Responsibilities:** - Receives detailed instructions on all work, under close supervision. - Positions, aligns parts in specified relationship to each other in fixture or other holding device. - Performs intermediate assembly tasks, such as soldering, potting, encapsulating, sanding, cleaning, epoxy, bonding, curing, laser welding, operation of pneumatic machinery, pneumatic presses, etc. - Installs finished assemblies or subassemblies in cases or other packing material. - May perform assembly operations under microscope or other magnifying device. - Mounts assembled components such as resistors, capacitors and integrated circuits. - Connects components, wires to printed circuit or route via soldering. - Adjusts, trims materials from components to achieve specified electrical or dimensional characteristics. - Performs inline testing, inspection using measuring instruments and electrical test equipment to ensure parts and assemblies meet production standards. - Ability to cross train on other programs in the facility. - Perform various repair/rework operations using approved written procedures. - Utilizes schematics and blueprint drawings to complete work. - Intermittent OVERTIME, typically completed on Fridays. - Other duties as assigned. **Job Qualifications:** - Requires a high school diploma or equivalent. - Six to twenty-four (6-24) months of industrial experience or similar training is preferred. - Ability to read schematics and assembly prints, as well as being thoroughly familiar with such assembly operations as wiring, welding, bonding and soldering is preferred. - Certain job assignments require the ability to obtain and maintain an IPC/J-STD Certification within 90 days of employment and throughout your tenure. - Familiarity with ISO 9001 and/or AS9100 is a plus. - Ability to obtain an ATF Possessor Permit. - Must be able to effectively communicate and engage with all levels of the organization verbally and in writing. - Possesses intermediate computer skills including MS Office, Excel and Outlook. - Please note that due to the requirements from the Department of Energy, U.S. CITIZENSHIP IS REQUIRED. **Physical Requirements:** - Must be able to sit or stand for prolonged periods of time. - Some bending, stooping, reaching, twisting, pushing, pulling, mild lifting of 10 pounds or less. - Some assemblers are required to intermittently lift up to 50 pounds. \#qioptiq Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

assemble company products. ESSENTIAL DUTIES AND RESPONSIBILITIES: Assemble company products at standard rate Follow written work instructions and complete required quality documents Accurately post transactions using shop floor data collection devices Interpret mechanical drawings to assemble products correctly Use personal hand tools as needed to assist in the assembly process Perform other duties as assigned SUPERVISORY RESPONSIBILITIES: None. QUALIFICATIONS: Able to pass a pre-employment math and measurement test Proficient in using measuring equipment (preferred) Ability to read mechanical drawings with minimal assistance (preferred) Understanding of dimensional tolerances (preferred) Able to read a tape measure to 1/16" accuracy EDUCATION and/or EXPERIENCE: High School Diploma or GED equivalent required REQUIRED SKILLS: Basic reading and writing skills Basic math skills (addition, subtraction, multiplication, division) Able to convert decimals to fractions and fractions to decimals Basic keyboarding skills including how to print documents PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds; occasionally lift and/or move up to 50 pounds. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the non-air conditioned work environment is usually moderate. All required PPE, including steel toe shoes, must be worn and a clean work environment must be maintained. NOTE: This Job Description may be modified due to business necessity. LEWCO, Inc. will make reasonable accommodations regarding these duties, responsibilities, and qualifications in compliance with Federal and State disability laws. EOE