Automatically apply for jobs with Zippia
Upload your resume to get started.
Electrical and instrument mechanic skills for your resume and career
15 electrical and instrument mechanic skills for your resume and career
1. PLC
- Worked with AB PLC including PLC 5, SLC 500 and ControlLogix PLC.
- Partnered with Engineering on job design PLC installation and trouble shooting Electrical trouble-shooting UNION CARBIDE (cont.)
2. Transmitters
- Overhaul and repair of automatic controlled valves, solenoids, pneumatic controllers and transmitters.
- Calibrated valves, flow meters, pressure and level transmitters, conductivity and ph analyzers.
3. Electrical Equipment
- Maintain and service the electrical equipment in an Industial Plant.
- Install, terminate, calibrate and test electrical equipment and instrumentation associated with deep water tension leg and semi-submersible platform construction.
4. Control Valves
A control valve is a device that uses power to manipulate and regulate the flow of fluids. A control valve is the most common final control element in the industry since it is a critical part of a control loop.
- Performed new installation, replacement and maintenance of automatic Control valves to include valve positioners and position feedback equipment.
- Conducted control valve diagnostic testing and calibration utilizing Fisher Flow Scan diagnostic test platforms.
5. Switches
- Checked temperature switches for notifications and ensured proper temperatures were reported.
- Operated pneumatic safety ground and disconnect switches during operations and experiments.
6. Test Equipment
Test equipment is a mechanical tool or a device which is used create signals and gather response from an electronic device under test. It helps in detecting any faults in the device and it also proves the proper operation of the electronic device.
- Field calibration of instrumentation using designed test equipment.
- Coordinated and maintained all test equipment and reactor plant instrumentation in proper calibration and operational readiness as Divisional Instrumentation Technician.
7. Hand Tools
- Operate power/pneumatic hand tools safely while efficiently preparing assemblies.
- Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.
8. Control Systems
- Install and terminate high and low electrical voltage circuitry for robotic armatures/Programmable Logic Control systems, electrical circuitry on assembly lines.
- Perform system and board-level testing and troubleshooting of elevator control systems comprised of digital and analog circuits, and microprocessor-controlled logic.
9. Instrumentation Maintenance
- Performed electronic, and instrumentation maintenance on process equipment.
10. Variable Frequency
A Variable-Frequency Drive is a kind of motor that varies the voltage and frequency sent to an electric motor. This variation provides for more power-efficient equipment and technology, which saves energy, and also produces less noise in electronics such as pumps and fans. Because of these and other features, electronics with a variable-frequency drive (VFD) also typically have longer lifespans than other electronics.
- Install and program various variable frequency drives including but limited to Allen Bradley and Siemens.
- Assembled and wired variable frequency drives to power oil and water pumps.
11. Ac
AC (Alternating Current) is the electric current that periodically changes its polarity and magnitude. Most devices, which are connected to the electrical grid directly, operate on AC. Electrical outlets in commercial areas and homes also supply electrical current.
AC may also refer to Air Conditioning as it relates to working to install duct work and air conditing units as part of an HVAC system.
- Qualified to work on voltages up 480 AC.
- Specialized in repairing and rewinding electrical motors, specifically AC motors.
12. Dc
- Installed and maintained DC Power for Telecommunications Companies.
- Experience in three phase and single phase electric motors, DC motors.
13. Transducers
- Installed electrical-mechanical components such as high/low pressure controls, temperatures sensors, transducers, and solenoids.
- Cleaned and tested transducers to meet both Military and commercial specifications, modified computer procedures.
14. Cranes
- Involved with up grading the variable speed drive system to the house cranes.
- Perform preventive maintenance on wide range of instruments, motors, drives, hoist, and cranes.
15. ISO
- Assisted Plant Manager in achieving ISO 9002 Certification on first attempt.
- Assisted QC inspectors with operation and functions of equipment for inspection IAW, APS-3 program ISO 9000.
What skills help Electrical And Instrument Mechanics find jobs?
Tell us what job you are looking for, we’ll show you what skills employers want.
List of electrical and instrument mechanic skills to add to your resume
The most important skills for an electrical and instrument mechanic resume and required skills for an electrical and instrument mechanic to have include:
- PLC
- Transmitters
- Electrical Equipment
- Control Valves
- Switches
- Test Equipment
- Hand Tools
- Control Systems
- Instrumentation Maintenance
- Variable Frequency
- Ac
- Dc
- Transducers
- Cranes
- ISO
- Control Loops
- Logic Controllers
- Flow Meters
- Electrical Systems
- Routine Maintenance
- NEC
- HMI
- Instrument Calibration
- Facility Processes
- P Id
- HVAC
- SCADA
Updated January 8, 2025
