Electrical apprentice jobs in Arkansas - 124 jobs

Job Posting End Date 01-30-2026 Please note the job posting will close on the day before the posting end date Install and maintain all types of electric meters energized at any voltage in the shop, stations, switchyards, generating plants, and on customer premises. Install and maintain distribution grid control devices and automated metering and distribution grid network infrastructure. Job Description Job Posting End Date 01-30-2026 Please note the job posting will close on the day before the posting end date Residency Requirement: Must reside 25 miles of Fayetteville Operations Center ESSENTIAL JOB FUNCTIONS: 1.) Perform all duties of lower classifications as required 2.) Install, maintain, and test intra-change, inter-change, and generating plant meters, instrument transformers, and associated equipment 3.) Install, maintain, and test satellite, land line, ethernet, and other remote metering and associated equipment 4.) Install, maintain and test loss compensated metering and associated equipment 5.) Install, maintain, test, and operate distribution system capacitors, regulators, reclosers, Alternate Feed Switches, and Line Voltage Monitors 6.) Install and maintain distribution grid control devices and automated metering and distribution grid network infrastructure 7.) Disconnect and reconnect secondary and primary services at the pole or transformer and replace primary fuses where applicable 8.) Perform a variety of special tests and inspections related to customer bill complaints, inquiries, and energy diversion investigations. Prepare related reports 9.) Assist with and perform distribution studies including inspection of distribution equipment, circuits, analysis, and preparing reports. 10.) Operate and perform work from aerial lift devices. 11.) Develop and provide employee training. MINIMUM REQUIREMENTS: Education requirements are listed below: Associate's degree in electrical/electronic technology. Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician). Work Experience requirement listed below: 24 months as a Meter Electrician B Required License(s)/Certification(s) are listed below: State Driver License. Must possess and maintain a medical certification card, if determined to be required by law. OTHER REQUIREMENTS: 1) Physical demand level is Not Yet Determined 2) To promote to this classification, individuals must successfully complete the Company training and qualification program for this classification including classroom instruction; written examination; job mentoring; and job performance demonstrations. This training and testing will occur during the minimum 24-month period that an employee will spend in the Meter Electrician B classification. 3) Work overtime as needed including extended daily shifts and weekends 4) Work late shifts as needed 5) Work independently under general supervision in a safe, efficient, and productive manner 6) Proficiently use computers and applications related to this classification 7) Effectively communicate with other employees, customers, and the general public in a courteous and appropriate manner 8) Promote a positive image of the Company to customers and the general public 9) Comply with all aspects of the AEP Corporate Code of Conduct 10) Report hazards and abnormal conditions 11) Attend and participate in training as assigned and assist in the training of other employees 12) Ability to walk long distances as determined by the Company 13) Ability to lift a 50-pound weight from the floor to a workbench These are additional expectations for the job and could include specific work experience, license / certifications, preemployment testing, expectations about travel, shift work, etc. Principal Line of Progression: From: Meter Electrician B To: Higher classification, if qualified Compensation Data Compensation Grade: U073-R32 Compensation Range: $34.69 - $47.62 The Physical Demand Level for this job is: M - Medium Work: Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Light Work. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

Company: United Trades of America Pay Range: $24-$30 per hour (depending on experience, certifications) Employment Type: Full-Time | Remodeling Dollar General Stores United Trades of America is expanding and actively seeking Arkansas Licensed Journeyman Electricians or Arkansas Licensed Apprentice Electricians to join our traveling crew in Arkansas. If you're a licensed electrician passionate about high-quality workmanship, safety, and teamwork, we want you on our team! About the Role: As a Licensed Journeyman or Apprentice Electrician, you will work on a Dollar General remodel projects. Key Responsibilities: Install, maintain, and troubleshoot electrical systems in a commercial environment. Read and interpret blueprints, schematics, and wiring diagrams to ensure accurate installation. Bend, cut, thread, and install conduit to precise measurements. Pull wire and terminate cable. Install and maintain lighting systems. Work independently or collaboratively with other electricians and construction teams. Follow all job-site safety protocols and OSHA regulations. Ensure timely completion of tasks without sacrificing quality or safety. Minimum Requirements: Active Journeyman Electrician License issued by the State of Arkansas (required). Minimum of 2-4 years verifiable commercial and/or industrial electrical experience. OSHA 10 or OSHA 30 Certification (required). Strong skills in conduit installation, wiring, and troubleshooting. Ability to work independently with minimal supervision. Must have personal hand tools and PPE appropriate for electrical work. Must pass a pre-employment drug screen and background check. Must be flexible and willing to travel across Arkansas for assignments. What We Offer: Competitive hourly wages ($24-$32/hr depending on experience and project scope). Consistent, long-term project work. Opportunities for career growth within a respected and expanding company. A professional environment committed to safety and worker success. About United Trades of America: At United Trades of America, we believe skilled tradesmen are the backbone of the construction industry. We provide dependable opportunities, strong support, and fair treatment to ensure your success on every project. How to Apply: Apply online today at *************************** or send your resume directly to *****************************. Questions? Text Marie at ************. United Trades of America is an equal opportunity employer. We value diversity and encourage all qualified candidates to apply.

Were seeking skilled Electricians for exciting projects in select cities across the US. We prioritize your safety and value your expertise. We offer flexible interview times and an easy-to-follow application process. Apply now to jumpstart your skilled craft career! Salary Range: $25 - $35 per hour Benefits: Paid Time Off Medical Retirement Heres what Skillit needs from you: Have strong electrician skills Ability to read and interpret documents such as safety regulations, operation and maintenance instructions, and procedure manuals Ability to work with tools, such as, power and non-powered hand tools Willing and able to follow instructions and ask clarifying questions Ability to handle materials that can weigh up to 200Ibs Strong attention to detail Heres what youll be doing: Perform skilled work in maintenance, repair and construction of lighting and power as part of the electrical jobs. Ability to control electrical systems in a responsible and accurate manner. Perform complex electrical tasks, including wiring, conduit sizing and switchgear installation. Install and terminate bus feeders, motors, and controls, ensuring compliance with safety codes. Troubleshoot and repair energized circuits and electrical equipment. Supervise rough-ins, underground layouts, and installation preparation. Read and interpret blueprints and control wiring diagrams for installation planning. Possess the ability to understand construction and repairs from drawings or sketches, estimate materials, supplies and labor costs. RequiredPreferredJob Industries Other

Apply Seasonal Electrical Worker Department of the Interior National Park Service Hot Springs National Park Apply Print Share * * * * Save * This job is open to * Requirements * How you will be evaluated * Required documents * How to apply The primary purpose of this position is to repair defective electrical wiring, controls, equipment, and fixtures in visitor centers, offices, ranger stations, museums, collection storage facilities, hotels, restaurants, maintenance facilities, public buildings, employee housing areas, residences, restrooms, campgrounds, ships, boats, trains, garages, and/or shops. The incumbent is required to adhere to all applicable electrical safety codes and standards. Summary The primary purpose of this position is to repair defective electrical wiring, controls, equipment, and fixtures in visitor centers, offices, ranger stations, museums, collection storage facilities, hotels, restaurants, maintenance facilities, public buildings, employee housing areas, residences, restrooms, campgrounds, ships, boats, trains, garages, and/or shops. The incumbent is required to adhere to all applicable electrical safety codes and standards. Overview Help Accepting applications Open & closing dates 12/22/2025 to 05/29/2026 Salary $25.42 to - $29.66 per hour Pay scale & grade WG 8 Location 1 vacancy in the following location: Hot Springs, AR Remote job No Telework eligible No Travel Required Not required Relocation expenses reimbursed No Appointment type Temporary - 1039 hours; The typical seasonal entry-on-duty period is April through October, but can be variable during these months due to weather conditions, project needs, or funding. Anticipated Entry on Duty: Mid April Work schedule Full-time - You may be required to work evenings, weekends, holidays, and/or overtime. Service Competitive Promotion potential None Job family (Series) * 2805 Electrician Supervisory status No Security clearance Not Required Drug test No Position sensitivity and risk Non-sensitive (NS)/Low Risk Trust determination process * Credentialing * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number MW-1543-HOSP-26-12854879-OC Control number 852970500 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Career transition (CTAP, ICTAP, RPL) Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants. Clarification from the agency U.S. Citizens, and those eligible for Interagency Career Transition Assistance Program (ICTAP) and/or the Career Transition Assistance Program (CTAP). Videos Duties Help The successful candidate for this position will perform the following duties: * Repairs defective electrical wiring, controls, equipment, and fixtures * Adheres to all applicable electrical safety codes and standards * Removes, replaces, tightens, splices, solders, and insulates defective wiring, controls, equipment, and fixtures. * Maintains electrical wiring and associated fixtures, controls, and equipment * Follows all standard safety procedures, wearing all applicable Personal Protective Equipment (PPE) associated with the job. Cut-off Dates: This is an open continuous announcement, in which applications are collected over several months, and have multiple cut-off dates. Applications will be considered throughout the open period of the announcement. INITIAL CUT OFF IS Monday, January 5, 2026. Additional referral certificates will be issued when a hiring official exhausts current certificate and/or additional vacancies need to be filled. Requirements Help Conditions of employment * U.S. Citizenship required. * Appointment subject to background investigation and favorable adjudication. * Meet Selective Service Registration Act requirement for males * Direct Deposit: Selectee will be required to participate in the Direct Deposit Electronics Funds Transfer Program. * Incidental Driving: You may be required to operate a government (or private) motor vehicle as part of your official duties. Prior to your first official motor vehicle operation, and again every year thereafter (or more frequently if management determines such need exists), you will be required to sign an affidavit certifying to your possession of a valid State issued driver's license that is current and has not been revoked, suspended, canceled, or otherwise disqualified in any way to prohibit your operation of a motor vehicle. You will also submit a photocopy of your valid State issued driver's license prior to your first official motor vehicle operation, and again every year, or more frequently if management determines such need exists. Lastly, you may be required to submit (within a State sealed envelope or submitted directly by the State authorities), and at your own expense, all certified driving records from all States that discloses all valid driver's licenses, whether current or past, possessed by you. Please indicate in your application whether you possess a valid State driver's license. * Uniform: You will be required to wear a uniform and comply with the National Park Service uniform standards. A uniform allowance will be provided. * Government Housing: Housing is not available. * Minimum Age Requirement: Applicants must be at least (1)18 years old or (2) at least 16 years old and: (a) Have graduated from high school or been awarded a certificate equivalent to graduating from high school; or (b) Have completed a formal vocational training program; or (c) Have received a statement from school authorities agreeing with their preference for employment rather than continuing their education; or (d) Be currently enrolled in a secondary school and either work only during school vacation periods or work part-time during the school year under a formal student employment program. Qualifications To qualify for this position, you must have sufficient knowledge and ability in the following job-related factors: * Ability To Do The Work Of The Position Without More Than Normal Supervision (SCREEN OUT) * Ability To Use and Maintain Hand Tools (Electrical Work) * Ability To Use Electrical Drawings * Knowledge of Electrical Equipment * Technical Practices (theoretical precise, artistic) * Theory and Instruments (Electrical, Electronic) Used in Shop and Trade Practices * Trouble shooting (electrical) SCREENOUT: Have experience, with close supervision, performing the duties which includes performing journeyman level electrical work including a wide range of commercial, industrial, residential and new construction services and repair; repairing and replacing broken, worn, damaged or poorly operating wiring, fixtures, controls and equipment; using test instruments such as ammeters, meggers, and test lamps; trouble shooting and repairing difficult electrical problems such as intermittent, open or shorted circuits; applying a knowledge of electrical theory and a working knowledge of the National Electrical Code; reading, interpreting, and utilizing blueprints, wiring diagrams, sketches, and drawings used in the electrical trade; using a variety of electrical equipment, tools, and test equipment; using formulas basic to the electrical trade; and using a variety of electrical equipment, tools, and test equipment. If your knowledge and ability in the SCREEN OUT factor above is not sufficient, you will receive no further consideration. In preparing your application, describe in detail the experience and training which you have had that specifically prepared you for this job and to perform the duties described for this job. Experience should be clearly described and documented in your resume. The qualifications reviewer will not assume performance of such duties by Job Titles alone. Address your knowledge, skills and/or abilities in the areas shown in the job-related factors. Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education There is no substitution of education for experience for Wage Grade (WG) positions. Additional information This announcement may be used to fill additional positions if identical vacancies occur within 90 days of the issue date of the referral certificate. Non-Competitive Rehire Eligibility: Temporary seasonal employees can only maintain their non-competitive rehire eligibility if they work no more than a combined total of Temporary NTE less than 1040 hours anywhere in the National Park Service (NPS) within their established service year. Accordingly, non-competitive rehire eligibility allows for re-appointment to the same position or another position appropriate for temporary appointment with the same qualification requirements (5 CFR 316.402[b][7]), based on series and grade, anywhere in the major subdivision (NPS). If you have held a temporary seasonal appointment in the past 12 months and have already worked the maximum temporary appointment less than 1040 hours during that period, you are still welcome to apply. However, please be aware that exceeding the limit of 1040 hours in your established service year will result in the loss of your non-competitive rehire eligibility. The limit can be exceeded by working multiple temporary seasonal positions that result in a combined total greater than 1040 hours. The limit also can be exceeded by working a single temporary seasonal appointment that exceeds 1040 hours, unless granted an exception by OPM. Employment may be terminated at any time due to fluctuations in funding levels, project needs, employee performance, or other considerations. Physical Demands: This position is required to perform electrical work from ladders, scaffolds, platforms, and other cramped and hard-to-reach places. Duties require the incumbent to sit, stand, stoop, bend, kneel, climb, crawl, and work in uncomfortable positions. The incumbent may be exposed to electrical shock, spark and arc hazard, and other health hazards. If the incumbent is assigned to perform electrical work in remote locations, the incumbent may be required to walk, hike, or drive over rough and uneven terrain. The incumbent is expected to lift and/or carry items up to 50 pounds, and occasionally exceeding 50 pounds in weight. Working Conditions: Work is both indoors and outdoors. Work outside may be subject to extreme weather conditions, with wind, rain, snow, and ice, in temperatures ranging from below 0 to over 100 degrees. Depending on the geography of the park unit assigned, work may take place at elevations ranging from sea level up to 10,000 feet. The incumbent may be regularly exposed to dust, fogs, mists, gases, smokes, sprays, and vapors, as well as noise, vibration, cuts, and abrasions from the use of electrical tools and equipment and may occasionally be exposed to hazardous materials that can cause skin, eye, and respiratory irritation and burns, as well as microbiological organisms and potentially hazardous wildlife. The incumbent is expected to comply with all safety and occupational health requirements and wear protective clothing, gloves, face shields, and in some cases a respirator that may be uncomfortable. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. A review of your resume and supporting documentation will be made and compared against your responses to the Assessment Questionnaire to determine if you are qualified for this job. If your resume is incomplete or does not support the responses provided in the Assessment Questionnaire, or if you fail to submit all required documentation, you will be rated 'ineligible', 'not qualified', or your score will be adjusted accordingly. If a determination is made that you have inflated your qualifications or experience, you can lose consideration for this position. Please follow all instructions carefully; errors or omissions can affect your rating. Resumes must not exceed two single-sided pages and resumes longer than two pages will not be accepted. You may only submit one resume. Only the document submitted as the "Resume" under the Documents section will be used to determine your qualifications/eligibility and for rating purposes. In the event you submit more than one resume, only the latest submission will be reviewed. Candidates will be rated and ranked using Category Rating procedures. These procedures place candidates with veteran's preference above non-preference eligibles within each category. Veterans with a service connected disability of at least 10 percent are listed in the highest quality category, except when the position being filled is scientific or professional at the GS-09 grade level or higher. Under Category Rating, candidates will be rated and ranked into one of two categories: * Best Qualified - applicants possessing experience that substantially exceeds the minimum qualifications of the position including all selective factors and are highly proficient in all requirements of the job and can perform effectively in the position * Well Qualified - applicants possessing experience that exceeds the minimum qualifications of the position including all selective factors and are proficient in most of the requirements of the job Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. Required documents Required Documents Help The following documents are required and must be submitted by 11:59 PM (EST) on 05/29/2026: * Resume which includes a list of all significant jobs held and duties performed. If military or civilian, please include your rank and/or grade. Resumes must not exceed two single-sided pages and resumes longer than two pages will not be accepted. The minimum font size is 10-point for all body text. Headers may be slightly larger but must remain legible. All resumes must maintain a minimum 0.5-inch margins on all sides to ensure readability and prevent excessive content compression. Including supplemental pages or attachments disguised as resume extensions are prohibited and will not be reviewed to determine your eligibility/qualifications. * A complete Occupational Questionnaire * Other Supporting Documents, if applicable, such as: * Veterans Preference Documentation: * If you are a Discharged, Non-Disabled Veteran, you must submit a copy of your DD-214 showing character of discharge (Member 4 copy), or other Documentation of Service and Separation under Honorable Conditions, as listed on the SF15. If you don't have your DD-214, you may request it after discharge from the National Archives. * If you are a veteran within 120 days of discharge, you must submit signed documentation from the Armed Forces certifying: 1) your expected release/retirement from active duty, 2) under honorable conditions, 3) your pay grade/rank/rate at time of discharge, 4) dates of active duty service, 5) any campaign or expeditionary medals received, & 6) dated within 120 days of your separation. * If you are a Disabled Veteran, Purple Heart Recipient, or Mother or Spouse of a Disabled or Deceased Veteran, you must submit all additional proof required by the SF15, and if applicable, a completed SF15. You may request a copy of your Department of Veterans Affairs letter from ******************** or call ************** to establish proof of disability. * Documentation for Interagency/Career Transition Assistance Plan consideration if you are a displaced Federal employee within the local commuting area. You must include: 1) Proof you are a displaced Federal employee, e.g., RIF Separation Notice, Notice of Proposed Removal, etc; 2) SF-50s (Notifications of Personnel Action) showing career/conditional tenure competitive status, promotion potential and duty location; and 3) your most recent performance appraisal. To exercise selection priority, displaced or surplus Federal employees must be rated well-qualified or above 70 on the rating criteria for this position. Do not submit photographs with your application package. Documents with photographs may not be seen by hiring officials - you must remove your image from any badges, licenses, etc. Do not upload Adobe portfolio documents. Adobe portfolio documents are not viewable by our agency's staffing offices. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. How to Apply Help To apply for this position: You must complete the occupational questionnaire and submit the documentation specified in the Required Documents section below. To receive consideration, the complete application package must be submitted by 11:59 PM (EST) on 05/29/2026.You must provide documentation to support your claim for each eligibility selected. Please review the required documentation listed in the eligibilities language to ensure you submit the appropriate information. Note: You will only be marked eligible for those eligibilities that you selected and provided the appropriate supporting documentation. WE DO NOT ACCEPT HARD-COPY OR E-MAIL APPLICATION PACKAGES. * Select Apply. If you are not logged in, you will be prompted to login or create an account. * Prompted to Start the Application Process by selecting "Start Application." * Click here for USAJobs Help with "How to create an application" * To PREVIEW the application questionnaire, select the following link: ******************************************************** * Select or add the resume you want to use for this application. Click here on how to build a resume in USAJOBS. * Select documents you want included in this application. * Review package to acknowledge your documents were reviewed. * Select if you want to include your demographic information. * After reading and certifying the application is true and submitted in good faith, select "Continue to Agency Site." * Follow onscreen prompts and instructions to complete your application. * Add the supporting documents by indexing your documents with the dropdown. * Upload any missing required documents or optional documents. * Review and Submit Application. * While logged in, you can check the status of your application by selecting "+" next to the job title for this position. * You can review or revise your application at any point during the open period of the announcement. * To update an application, you should log into your USAJOBS account and select "+" next to the job title for this position. Select "Update Application" for this job. * Note: When you click Update Application, you will be prompted to re-select your documents from USAJOBS. Documents submitted with the first application will no longer be associated with the applicant record. So it is important that you select all documents you want to use in the re-application. Agency contact information MWR HR Staffing Team Email mwr_hr_staffing_************ Address Hot Springs National Park 101 Reserve Street Hot Springs, AR 71901 US Next steps Once the Occupational Questionnaire is received you will receive acknowledgement that your submission was successful. If you are among the most qualified candidates and your name is referred to the hiring official, you may be contacted directly for a possible interview. You will be notified of the status of your Application Package at the time candidates are referred for consideration, and when the selection process is complete. Fair and transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. Criminal history inquiries Equal Employment Opportunity (EEO) Policy Financial suitability New employee probationary period Privacy Act Reasonable accommodation policy Selective Service Signature and false statements Social security number request Required Documents Help The following documents are required and must be submitted by 11:59 PM (EST) on 05/29/2026: * Resume which includes a list of all significant jobs held and duties performed. If military or civilian, please include your rank and/or grade. Resumes must not exceed two single-sided pages and resumes longer than two pages will not be accepted. The minimum font size is 10-point for all body text. Headers may be slightly larger but must remain legible. All resumes must maintain a minimum 0.5-inch margins on all sides to ensure readability and prevent excessive content compression. Including supplemental pages or attachments disguised as resume extensions are prohibited and will not be reviewed to determine your eligibility/qualifications. * A complete Occupational Questionnaire * Other Supporting Documents, if applicable, such as: * Veterans Preference Documentation: * If you are a Discharged, Non-Disabled Veteran, you must submit a copy of your DD-214 showing character of discharge (Member 4 copy), or other Documentation of Service and Separation under Honorable Conditions, as listed on the SF15. If you don't have your DD-214, you may request it after discharge from the National Archives. * If you are a veteran within 120 days of discharge, you must submit signed documentation from the Armed Forces certifying: 1) your expected release/retirement from active duty, 2) under honorable conditions, 3) your pay grade/rank/rate at time of discharge, 4) dates of active duty service, 5) any campaign or expeditionary medals received, & 6) dated within 120 days of your separation. * If you are a Disabled Veteran, Purple Heart Recipient, or Mother or Spouse of a Disabled or Deceased Veteran, you must submit all additional proof required by the SF15, and if applicable, a completed SF15. You may request a copy of your Department of Veterans Affairs letter from ******************** or call ************** to establish proof of disability. * Documentation for Interagency/Career Transition Assistance Plan consideration if you are a displaced Federal employee within the local commuting area. You must include: 1) Proof you are a displaced Federal employee, e.g., RIF Separation Notice, Notice of Proposed Removal, etc; 2) SF-50s (Notifications of Personnel Action) showing career/conditional tenure competitive status, promotion potential and duty location; and 3) your most recent performance appraisal. To exercise selection priority, displaced or surplus Federal employees must be rated well-qualified or above 70 on the rating criteria for this position. Do not submit photographs with your application package. Documents with photographs may not be seen by hiring officials - you must remove your image from any badges, licenses, etc. Do not upload Adobe portfolio documents. Adobe portfolio documents are not viewable by our agency's staffing offices. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Job Description We are looking for both a Journeyman Electrician or someone to train as an Electrician Apprentice to work in electrical construction on commercial and industrial properties. Most tools will be provided along with all safety PPE. Ongoing training with the opportunity for advancement. A Robust benefits package that includes Health Insurance, Vision Insurance, Dental Insurance, 401K (matching), and Paid Time Off. Compensation is $40,000-$66,000 per year based on experience with overtime after 8 hours, time and a half on Saturdays and double time Sundays. We also pay for drive time over a 30-mile radius of the shop. Please provide a resume for call-back interviews. ESSENTIAL DUTIES An individual must be able to perform each of the following Essential Duties satisfactorily to perform this job successfully. This list is not intended to be an exhaustive list of all functions, responsibilities, skills, and abilities. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the position's Essential Duties, provided it does not create an undue hardship on the Company. Measuring, cutting, bending, threading, assembling, and installing various types of conduit May operate hand and power tools of all types (including but not limited to air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments) May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, clean up rubble and debris Cleans maintains, and services equipment and tools Performs additional duties or emergency duties after normal working hours Demonstrate a willingness to comprehend and follow instructions given by qualified electrical mentors Work efficiently to ensure assigned tasks will meet deadlines Record field wiring changes and modifications on blueprints for recording on master circuit diagrams Follow and encourage others to follow OSHA, company, and site-specific safety procedures Operate heavy equipment and machinery in the performance of these essential duties Work with and around hazardous materials, as well as at heights and in confined spaces in the performance of these essential duties Drive a vehicle to various job sites throughout working hours Maintain a valid driver's license and a driving record that meets company policy Work in a constant state of alertness Regular attendance and punctuality are essential for employee job performance Perform other duties as assigned Journeyman Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures Terminate wires to circuit breakers, transformers, devices, controls, and other components in accordance with the schematics, prints, drawings, or instructions Hold a Journeyman license in the state you are currently working in Record field wiring changes and modifications on blueprints for recording on master circuit diagrams Requirements EXPERIENCE Apprentice 1 - 4 years Journeyman 4+ years ENVIRONMENT, PHYSICAL AND MENTAL REQUIREMENTS Exposure to varying outdoor conditions, loud noise, dust, toxic chemicals and materials, varying fumes or odors; slippery or uneven walking surfaces; and work in ditches/excavations Work at heights, such as by working on ladders, scaffolds, platforms, tops of single and multi-story buildings, as well as working in confined spaces such as underneath single story and multi-story buildings Must be able lift and carry up to 100lbs Must be able to perform manual and repetitive tasks and body movements including standing and/or walking for long periods of time, bending, stooping, climbing, reaching, pulling, pushing, lifting, and carrying Must be able to stoop, kneel, crouch, or crawl in awkward positions continuously Must be able to work in overhead structures and around and beneath machinery Must be able to complete job duties proficiently while adapting to changing demands and priorities Must have the ability to work in a constant state of alertness and concentrate for long periods of time to perform duties in a safe manner This position is subject to ergonomic testing SAFETY SENSITIVE This position is designated as a safety sensitive position because it includes as part of the job duties operating a motor vehicle, the operating, maintaining, and monitoring of heavy equipment and machinery, and working with and around hazardous materials, at heights, and in confined spaces. This position is one in which a lapse of attention could result in injury, illness, or death. For the safety of the employee and others, the employee must be able to work in a constant state of alertness and concentrate for long periods of time while operating a motor vehicle, operating, maintaining, and monitoring heavy equipment and machinery, and while working with and around hazardous materials, at heights, and in confined spaces. SKILLS AND COMPETENCIES High school diploma or general education degree (GED) preferred Actively developing an understanding and working knowledge of the NFPA 70 series, State, and local codes Ability to understand, interpret and utilize blueprints, wiring diagrams, and schematics Locate and diagnoses electrical malfunctions using various test instruments Operate a variety of power tools, shop equipment, and electrical testing instruments Ability and willingness to learn and perform duties normally associated with other areas Ability to communicate clearly with others Good organizational and time-management skills All employees must provide and maintain the required tool inventory for this position Ability and willingness to work overtime and non-standard schedule: nights, weekends and holidays as/if required A current valid driver's license is required BENEFITS We offer a comprehensive benefits package to includes some of the following: Low Medical, Dental, and Vision rates Basic and Optional Life Insurance, Accidental Death & Disability 401k Retirement Paid Time Off Paid Holidays Education Assistance for trade school Apprenticeship Program and Employee Training Courses Overtime over 8 regular hours and Saturday work, Double-time on Sundays and holidays Mileage Reimbursements and Per Diem MCC supplies PPE and most tools

U. S. Steel is committed to fostering an inclusive workplace culture and celebrate the diversity of our employees. Objective of the Job: This position is an industrial electrician responsible for maintaining and troubleshooting a wide range of equipment in the Melt Shop area of Big River Steel facility. Duties and Responsibilities: 1) Ensure Safety, Environmental, Quality requirements and “where applicable” ResponsibleSteel requirements are followed. 2) Repair complex electrical equipment, including automated machines, controls, panels, relays, circuit breakers, communication systems, VFD drives 3) Install electrical equipment with minimal instruction after general assignment 4) Diagnose problems, replace, or repair defective equipment 5) Troubleshoot and repair complex hydraulic problems 6) Work with production to help develop and maintain a highly productive Melt-Shop Qualifications : 1) Demonstrated safety focus and willingness to proactively apply it in a team environment 2) Quality and detail oriented with strong technical and analytical problem-solving skills 3) Adaptability to accept changes in job duties and eagerness to learn and apply new knowledge 4) Reliable team player with good communication skills 5) Highly motivated, self-directed, and willing to put in extra hours when needed 6) Minimum 5 years of work experience as an industrial electrician preferred 7) Previous experience with NFPA 70E practices 8) Familiar with common electrical tools and measuring instruments 9) Experience reading electrical, hydraulic, and pneumatic schematics 10) Strong working knowledge of 480-volt 3 phase electrical distribution systems and motor control 11) Basic PLC programing experience (Allen Bradley preferred) 12) HS diploma or equivalent is required; electrical degree or training is preferred Working Conditions and Physical Requirements: The environment is typical for a steel mill production areas, with extreme temperatures, high noise levels, and dusty/greasy areas. Physically demanding work will be required in the production environment. Typical work hours are four 12-hour shifts, which rotate days and nights. This results in working some weekends/holidays and overtime. Supervisory Responsibility: This position does not supervise others.

Job Description The Master Electrician is responsible for supervising the Facilities Electricians and assisting the Director of Facilities and Chief Engineer and under their direction oversees the Facilities Department operations on a daily/shift basis. All functions are to be performed within the guidelines of the Saracen Casino Resort's policies and procedures, Internal Control Standards and objectives. Essential Functions and Responsibilities Trains staff as necessary. Assists with day to day operations. Establishes procedures and directs personnel in the efficient operation of facilities. Recommends changes in equipment or facilities that would improve service and/or efficiency of the operations. Prepares special reports, maintains necessary records and files. Instructs personnel in safety policies and procedures. Recommends changes in the operation of facilities. Provides exceptional customer service to all patrons and communicates in a pleasant, friendly, and professional manner at all times. Maintains a professional work environment with supervisors and staff. Meets the attendance guidelines of the job and adheres to regulatory, departmental and company policies. Attends all necessary training meetings. Assist in other projects, as directed. Duties, responsibilities, requirements and expectations pertaining to this job are subject to change as needed. Hours are determined by 24-hour schedule. Outstanding example of and a credit to Saracen Casino Resort Qualifications/REQUIREMENTS The requirements listed below are representative of the knowledge, skill, and/or ability required. To perform this job successfully, an individual must be able to perform each of the essential duties and responsibilities satisfactorily. Must be a minimum of 21 years of age or older upon employment. High school diploma or its equivalency preferred. Previous experience in facilities, preferably in the casino industry. Must have experience using purchasing software and Microsoft Word and Excel. Must present a well-groomed and professional appearance. Must possess excellent communication skills. Must be able to read, write, speak and understand English. Must be able to respond to visual and oral cues. Ability to write routine correspondence and to speak effectively to the public, employees and customers. Must have the ability to deal effectively and interact well with the customers and employees. Must have the ability to resolve problems/conflicts in a diplomatic and tactful manner. Must be able to be approved for and maintain a valid gaming license. Applicants must be able to substantiate a safe driving record within the parameters acceptable to our liability insurance carrier. Work nights, weekends and holidays as required. Employment is contingent upon a favorable outcome of a background investigation and drug screening. Must have and maintain Journeyman's Electrical License. PHYSICAL, MENTAL AND ENVIRONMENTAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Must have the physical ability to work with extreme weather as well as the ability to lift 80 lbs, to squat, stand or bend repeatedly. Must be able to tolerate areas containing secondary smoke, high noise levels, bright lights and dust. Must be able to stand, walk, and move through all areas of the casino. Maintain physical stamina and proper mental attitude to work under pressure in a fast-paced, casino environment and effectively deal with customers, management, employees, and members of the business community in all situations. SAFETY SENSITIVE POSITION This position is classified as a safety-sensitive position under applicable laws and regulations. The role requires heightened awareness and the ability to perform job duties safely and effectively, as it involves tasks that could impact the health and safety of employees, guests, and the public. As such, employees in this role may be subject to drug and alcohol testing in accordance with company policy and legal requirements. Saracen Safety • Each employee shall comply with occupational safety and health standards and all rules, regulations, and orders issued pursuant to the OSH Act which are applicable to his own actions and conduct." Here's a breakdown of what this means: Compliance with Standards: Employees must follow the occupational safety and health standards established by OSHA. These standards are designed to protect workers from various hazards in the workplace. Adherence to Rules and Regulations: Employees are also required to comply with any rules, regulations, and orders issued under the OSH Act. This includes following specific procedures and safety practices that are put in place to mitigate risks. Personal Conduct: The clause emphasizes that employees' own actions and conduct must align with safety standards. This means that workers have a personal responsibility to engage in safe work practices and avoid behaviors that could endanger themselves or others. Adhere to and promote the following: READY STANDARDS R - Recognize E - Engage A - Appreciate D - Deliver Y - Yes, We Can! Saracen Casino is an Equal Opportunity Employer.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Automation Machine Tool Electrician - $5,000 Sign On Bonus 2nd & 3rd Shift- $37.40/hour + 6 % Shift Premium Location: Lafayette, Indiana Medical/Dental/Vision/Life Insurance, Incentives/Bonus Opportunities, Matching 401k *************************** : Apply online and create a candidate account. CATERPILLAR - BUILD WHAT MATTERS What matters most to you? Is it being part of a strong team? Supporting your family? Solving global problems? You can do these and more at Caterpillar; where your work enables progress around the globe, and you contribute to meaningful work. Together, we can build what matters! Automation Machine Tool Electricians needed at The Large Power Systems Division located in Lafayette, IN. Responsibility to electrically troubleshoot and repair complex domestic and foreign machine tools and related equipment. Applicant must possess the ability to troubleshoot and repair CNC, PLC, and relay logic-controlled machines. Job Duties/Responsibilities may include, but are not limited to: * Knowledge and experience repairing on or more of the following types of equipment: Okuma, G&L, Mazak, Lamb, Landis (grinders), Waldrich Coburg, Ingersoll, Toyoda, DMG Mori and a variety of other machines in a large industrial machine shop. * Examples of related equipment to be repaired: P&H cranes and hoists, conveyors, furnaces, large part washers, ABB robots, CNC machine tools and other equipment in a large industrial machine shop. * Examples of machine controllers to be repaired: CNC and PLC equipment with Fanuc, Siemens, Allen Bradley, Modicon, Indramat, and a variety of other controllers on the machines in the machine shop. * AC/DC analog and digital drives, including Siemens, Allen Bradley, Modicon, Indramat, and various other drives. * Examples of measurement and feedback scale and encoder systems, including Heidenhain, inductosyn, and various other feedback devices. * Applicant must possess basic mechanical skills and the ability to operate basic tools to complete the job. * Seeking a team-oriented individual with a positive attitude, good work ethic, with personal initiative and self-motivation. * Applicant must be willing to work overtime opportunities to support production demands. Basic Qualifications: * Minimum of 3 years' experience in the electrical repair of machine tools and related equipment, including experience with the following: * Okuma, G&L, Mazak, Lamb, Landis (grinders), Waldrich Coburg, Ingersoll, Toyoda, and a variety of others in the machine shop. * P&H cranes and hoists, conveyors, furnaces, washers, ABB robots. * Experience with troubleshooting and repairing relay log machines and CNC/PLC controlled machines, including: * CNC and PLC controlled equipment with Fanuc, Siemens, Allen Bradley, Modicon. * Indramat, and a variety of other controllers on the machines in the machine shop. * Experience with AC/DC analog and digital drives, including: * Siemens, Allen Bradley, Modicon, Indramat, and various other drives. * Ability to demonstrate intermediate or higher proficiency in readying and interpreting machine tool prints/schematics * Basic mechanical skills * Ability to operate basic tools to complete the job * Self-starter and self-motivated individual who works well individually in a team environment. Note: Selected candidate must pass the color blindness test and must be able to work at heights and in confined spaces. Top Candidates will also have: * Certified electrician * Associate Degree in Industrial Automation Physical Requirements: * Candidates for all positions must have the ability to work in a fast pace, medium to heavy duty assembly and technical environment. * Work may involve frequent bending, stooping, and kneeling, twisting, turning, climbing, and standing on concrete for 8+ hours. * All positions also require the ability to lift 40 pounds and withstand frequent repetitive movement of hands with a variety of tooling. * Must be able to work in heights and confirmed spaces Additional Information: * Location of this position is in Lafayette, IN * Shift: 2nd Shift (3:30pm-11:30pm) & 3rd Shift (11:30pm-7:30am) * Relocation assistance is available to eligible candidates * Hourly pay rate of $37.40 plus 6% shift premium. Higher rates offered based on experience. * 40-hour work weeks with potential for Overtime * 13 days / 104 hours of paid Personal Time Off (PTO) - (Prorated based upon start date) * 11 Paid holidays * Climate controlled work environment - most areas * Clean/safe work environment * Please Attach an Updated Resume Please ensure you frequently check the e-mail account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at ***************************. #LI Summary Pay Range: $37.40 - $47.60 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * These benefits also apply to part-time employees Posting Dates: January 15, 2026 - February 5, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Summary: Primary responsibilities will consist of safely and effectively installing, wiring, and upgrading electrical systems in commercial and industrial facilities. As a contracted employee of JARBO Employment Group, we expect you to have a positive attitude, to lead by example, demonstrate sound decision-making skills, encourage great teamwork, inspire those around you, and demonstrate good stress tolerance. We want to see you embrace and immerse yourself in the host employer's culture. Responsibilities: Skillfully run, bend, and secure conduit; pull wiring; and perform precise terminations in diverse environments, including factories and commercial buildings. Support installation tasks across the electrical trade spectrum-from small conduit and wire runs to complex UPS and generator systems-while ensuring adherence to safety and industry standards. Read and accurately interpret blueprints, one-line diagrams, and electrical schematics to guide project execution and troubleshooting. Work with industrial/manufacturing-grade electrical installations, handling systems ranging from 24 V DC to 480 V AC safely and effectively. Safely operate scissor lifts, boom lifts, and bucket lifts as required for overhead and elevated installations. Maintain tools, inventory, and supplies essential for panel installations and troubleshooting tasks. Travel to manufacturing plants, distribution centers, and process facilities per a rolling project calendar. Follow company safety standards and ensure compliance with all electrical codes. Maintain accurate documentation and complete other duties as assigned.

STRUCTURE RESOURCES is immediately seeking AR Licensed Electrical Journeyman to work on a long term project near De Moines, Iowa Compensation: Up to $46.00/hr $100/day Per Diem for days worked (for those who qualify) Schedule/Duration: Working 5-10s and 1 - 8hr day Long Term Project(s) The ideal candidate will have: 5+ years in the commercial and industrial environment Iowa Electrical Journeyman License (or reciprocating state lic) SAFETY MINDED individuals committed to continuous SAFETY AWARENESS Dedicated Team Member Benefits: 401(k) matching Dental insurance Health insurance Life insurance Vision insurance STRUCTURE RESOURCES has TWO guiding purposes: (1) Provide opportunity, positively impacting the lives of our Team Members and their families; (2) performing at a uniquely high level for our clients. If qualified please reply by providing a resume! PLEASE VISIT OUR WEBSITE @ www.structureresources.com THANK YOU FOR BEING SAFE TODAY!

Department: Sheriff - Detention Position Control Number: 0418-017 FLSA Status: Non-Exempt; position is eligible for overtime Safety Sensitive Designation: This position is designated as safety-sensitive. Random Drug/Alcohol Test: Yes Opening Date: January 17, 2026 Closing Date: January 26, 2026 at 11:59 PM This should not be interpreted as all-inclusive. It is intended to identify the essential functions and minimum qualifications of this job. The incumbent(s) may be required to perform job-related responsibilities and tasks other than those stated in this . Nothing in this job description restricts management's right to assign or reassign job-related responsibilities and tasks to this job at any time. Certain functions are understood to be essential; these include, but are not limited to, attendance, getting along with others, working a full shift, and dealing with and working under stress. Any essential function of this class will be evaluated as necessary should an incumbent/applicant be unable to perform the function or requirement due to a disability as defined by the Americans with Disabilities Act (ADA). Reasonable accommodation for the specific disability will be made for the incumbent/applicant only to the extent medically and reasonably feasible. An Equal Opportunity Employer JOB SUMMARY: Responsible for the installation, repair, and maintenance of electrical equipment, wiring, and fixtures at the Pulaski County Detention Facility. ESSENTIAL JOB FUNCTIONS: * Receives work requests listing repairs and installations needed; determines materials and supplies needed for job completion. * Installs and connects electrical wiring, equipment, and fixtures as specified. * Operates various hand and light power tools to splice wires, solder connections, and cut or drill wiring holes for fixtures and conduits. * Operates various meters to test voltage, amperage, and continuity of electrical circuits. * Computes the voltage and/or amperage requirements on new fixtures and installations. * Reviews electrical system plans and specifications to ensure the efficiency of system maintenance and availability of parts. * Performs preventative maintenance and testing of electrical wiring, motors, and fixtures as needed. * Maintains the inventory of needed electrical supplies and materials; completes requisitions to order them. * Diagnoses malfunctions in electrical equipment, wiring, and fixtures; replaces and repairs malfunctioning motors, switches, wiring, and fixtures. * Documents equipment inspections and repairs as required by supervisor. SECONDARY DUTIES AND RESPONSIBILITIES: * Performs other related duties as required. PERSONNEL SUPERVISED: None WORKING CONDITIONS: Work is performed in a smoking-restricted office environment within a detention facility. MINIMUM QUALIFICATIONS: REQUIRED SKILLS, KNOWLEDGE, AND ABILITIES: * Considerable knowledge of the standard tools, methods, materials, and practices of the electrical trade. * Considerable knowledge of the standard practices and safety precautions of the electrical trade. * Considerable knowledge of all applicable electric codes, laws, and regulations. * Considerable knowledge of the operating principles of electrical motors and equipment. * Ability to read and interpret blueprints, specifications, and written work instructions. * Ability to determine work materials and supplies needed for job completion. * Ability to maintain detailed records concerning work completion. * Ability to remain on call 24 hours. * Ability to attend work regularly and reliably. * Skill in the operation of hand tools, light power tools, and test meters. * Skill in the operation of power tools for cutting, bending, and assembling conduits. PHYSICAL REQUIREMENTS: * Ability to maneuver through crawl spaces and cramped areas. * Ability to work in a bent or kneeling position for extended periods of time. * Ability to lift and push up to 50-pound loads. * Ability to climb ladders to make inspections and repairs. * Digital dexterity is necessary for equipment operation and tool usage. * Visual acuity is needed for building inspection and equipment and tool usage. * Ability to effectively communicate orally. * Ability to work in a constant state of alertness and in a safe manner. * Ability to concentrate for long periods of time. EDUCATION AND EXPERIENCE: Completion of vocational-technical school training in the electrical trade; work experience in the electrical trade; or any equivalent combination of experience and training which provides the required skills, knowledge, and abilities. * Employment is contingent upon the successful completion of a criminal background check, motor vehicle report, child maltreatment check, and adult maltreatment check. * Must possess or be able to immediately obtain a valid Arkansas driver's license. * In addition to pre-employment checks, all employees who operate county vehicles are required to undergo an annual motor vehicle report. * This position is safety-sensitive and is subject to random drug and alcohol testing. * Must possess or be able to immediately obtain a valid Arkansas Journeyman Electrician's license. * Regular and reliable attendance is an essential function of this position. #ZR #LI-DNP

Job Description We are hiring experienced Controls Electrician to join our nationwide install team for a project rollout. This role involves installing control panels in large-scale distribution centers across the country. Work averages 72+ hours per week, with travel starting August through mid-November, resuming in January. Requirements - Controls Electrician: Experience with industrial controls/automation, PLCs panels and I/O wiring Ability to run/bend conduit, pull, and terminate wire Knowledge of LOTO standards, service work, and voltage drop Experience with scissor, boom, and bucket lifts OSHA 10 or 30 preferred What We Provide - Controls Electrician Company vehicle and gas card Cell phone Installation tools Hotel accommodations during travel $45/day food per diem Benefits after 30 days

NorthWest Arkansas Community College (NWACC) provides quality and affordable higher education to empower lives and strengthen communities within Northwest Arkansas and surrounding areas. As the largest community college in Arkansas, NWACC is recognized as a leader in education. NWACC offers a full range of associate degrees, certificates and workforce training programs that prepare students for rewarding futures and careers. NWACC employees are dedicated to fostering a diverse educational community and cultural learning environment that supports student success. We are seeking an experienced and highly skilled Commercial Electrician to join our team. As a Commercial Electrician, you will be responsible for ensuring the electrical systems of our commercial properties are safe, efficient, and up-to-code. This position is governed by state and federal laws and institution policy. This position will be divided between our Washington County Campus and the main Campus in Benton County. This is an excellent opportunity for a motivated individual to advance their career and make a meaningful impact on the daily operations of our organization. Essential Duties: Install, maintain, and repair electrical systems and equipment in a timely and efficient manner. Ensure that all electrical work complies with local and national codes and regulations. Diagnose and troubleshoot electrical issues and make repairs as necessary. Read and interpret blueprints, schematics, and electrical code specifications. Install and maintain lighting systems, including emergency lighting and lighting control systems. Coordinate with contractors and other team members to complete projects on time and within budget. Replacing damaged wiring, fixtures, or components as needed. Other duties as assigned Rate of Pay: $23.40 per hour *Higher compensation may be considered based on qualifications directly related to position. Completed applications received by 10/13/2025 will be assured full consideration. Late Applications will be reviewed as necessary to fill the position. Required Qualifications: The formal education equivalent of a high school diploma; plus, completion of required education or training along with the required license or certification as an Electrician. At least 3 years of experience as a Commercial Electrician. Certificates/Licenses: Must be licensed as Journeyman Electrician in accordance with ACA 17-28-304. Preferred Qualifications: Experience with electric motors and VFD/VSD Knowledge Skills and Abilities: Knowledge of the methods, practices, and safety precautions as they relate to Electrical skilled trades. Knowledge of the accepted practices, processes, materials, and tools of Electrical skilled trades. Knowledge of the laws and regulations relating to Electrical skilled trades. Ability to provide mathematical and analytical skills necessary to do material estimates for one or more of the skilled trades. Ability to read and interpret blueprints, manuals, schematics, building plans, and/or work drawings. Ability to understand verbal and written instructions. Ability to maintain inventory on needed parts and tools for one or more of the skilled trades. Understanding of electrical theory, circuits, and wiring methods. Physical Demands/Work Environment: The position requires the ability to lift, carry, push, and pull heavy materials and objects weighing up to 50 pounds, or heavier weights with the use of proper equipment. Must be able to work during different weather climates; to include hot/cold weather, rain, etc. Must possess mobility to work in and around different buildings and facilities, to operate a motor vehicle and drive on surface streets; strength, to work in confined spaces and around machines, to climb and descend ladders, and to operate varied hand and power tools and equipment; vision to read printed materials and a computer screen and hearing and speech to communicate in English over the telephone or radio. NWACC is an Equal Opportunity Employer, please see our EEO policy.

Carthage Forest Products is looking for Electricians to join our team located, in Carthage, Arkansas. The incumbent in this role is responsible for performing complex tasks, planning and laying out the routing, placement, and arrangement of industrial or similarly complex systems, circuits, controls, and equipment. In additions, installing, modifying, repairing, maintaining, troubleshooting, testing, and loading new and existing electrical lines, circuits, systems, and associated fixtures, controls, and equipment. This highly skilled role creates value by performing a variety of electrical systems and maintenance duties, while ensuring maximum facility uptime to meet production goals. This position requires knowledge of and hands-on-experience with the following technologies: instrumentation, electronics, lubrication, hydraulics, power transmission, mechanics, steam, welding and pneumatics. Essential Duties and Responsibilities Install, troubleshoot, and repair equipment in compliance with plant codes, policies, and procedures Respond to all maintenance issues, both mechanical and electrical, throughout the plant Undertake preventative maintenance program for equipment. Read blueprints, diagrams, and schematic drawings to repair equipment. Verify and document repairs made. Work in a safe manner using proper PPE. Work any shift, on-call, holidays, weekends, and overtime as needed Education/ Experience/ Certifications/ Licenses 1-3 years of previous electrical and maintenance experience Knowledge of and experience with hand and power tools Mechanical, hydraulic, and pneumatic knowledge and aptitude Experience in an industrial environment with VFDs, PLCs, MCCs, HMIs Experience with high voltage (600-23,000 volts) Competent with all type power transmission components and troubleshooting Be able to pass a basic mechanical assessment test Be able to pass a basic hands-on test Knowledge, Skills, and Abilities Good Communication skills Safe working practices Problem solving skills Basic Computer knowledge Work setting Onsite In-person role (Required). Benefits 401(k) 401(k) matching STD/LTD Health insurance Life insurance Dental Insurance Vision Insurance Employee Assistance Program(EAP) Paid time off Work Environment Manufacturing Plant Physical Demands The physical demands and work environment are representative of a typical sawmill environment. The employee is frequently exposed to moving mechanical parts. Noise levels are moderate to high depending on the area of the mill. While performing the duties of this job, the employee is often required to stand, walk, sit, use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk and hear. Requires close vision, distance vision, and depth perception. Lifting and physical activity is required for this position, must be able to move boards and wood pieces. The employee must occasionally lift or move up to 30 pounds. Reasonable Accommodations Statement "Carthage Forest Products is an equal opportunity employer committed to diversity and inclusion. We provide reasonable accommodations for qualified individuals with disabilities. If you require an accommodation to apply, interview, or perform the essential functions of this job, please contact Latoya Freeman at lbigriverfp.com or ************."

Job Description APPRENTICE ELECTRICIAN Staley Electric is an award-winning electrical service company and has been serving Arkansas residents and businesses since 1951. Our customers are the heart of Staley, so we need a person that works well with others and enjoys working in various environments. At Staley, be part of a team where you are trusted and recognized for your professional ability. Your ability “to show extraordinary care” to your work, our customers and each other is paramount to your success at Staley. Why Staley Top Pay Growth Opportunities Comprehensive Benefits - Medical, Dental, Vision, 401 + Match, Dave Ramsey Programs and More! Generous PTO and Holiday plans Employee Retention Programs you won't believe Great training programs Key Responsibilities Maintain a constant focus on two things - exceeding customers' expectations and ensuring safety in all we do Electrical experience in commercial and/or retail environments (1st or 2nd-year apprentice) Skill in the installation, repair, and maintenance of all types of electrical system equipment and components Locating, diagnosing, and troubleshooting in the electrical system or equipment Work standard computations relating to load requirements of wiring or electrical equipment Manage time, material and people resources throughout project life cycles Manage work orders, signoffs, daily log/journal and other project documentation Knowledge of the tools, equipment, and materials common to the electrical trade Knowledge of applicable electrical codes, standards, and regulations Qualifications Self-starting, highly motivated, and used to work environments that move quickly Must demonstrate the highest standards of ethics and integrity Must meet company standards for pre-employment background and drug screening Typical physical demands include frequent work on lifts, ladders, and possibly rooftops and other harder-to-access areas. Must be able to see, hear, speak, and write clearly in order to communicate with employees and/or customers; manual dexterity required for frequent reaching, climbing, and lifting of objects (typically up to 50 pounds), and operating power tools. This is a Safety Sensitive position per Act 593 of 2017. Staley Electric is an Equal Opportunity/ Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected Veteran status. Powered by JazzHR hls TB5V9pj

Job Posting End Date 01-30-2026 Please note the job posting will close on the day before the posting end date Install and maintain all types of electric meters energized at any voltage in the shop, stations, switchyards, generating plants, and on customer premises. Install and maintain distribution grid control devices and automated metering and distribution grid network infrastructure. Job Description Job Posting End Date 01-30-2026 Please note the job posting will close on the day before the posting end date Residency Requirement: Must reside 25 miles of Fayetteville Operations Center ESSENTIAL JOB FUNCTIONS: 1.) Perform all duties of lower classifications as required 2.) Install, maintain, and test intra-change, inter-change, and generating plant meters, instrument transformers, and associated equipment 3.) Install, maintain, and test satellite, land line, ethernet, and other remote metering and associated equipment 4.) Install, maintain and test loss compensated metering and associated equipment 5.) Install, maintain, test, and operate distribution system capacitors, regulators, reclosers, Alternate Feed Switches, and Line Voltage Monitors 6.) Install and maintain distribution grid control devices and automated metering and distribution grid network infrastructure 7.) Disconnect and reconnect secondary and primary services at the pole or transformer and replace primary fuses where applicable 8.) Perform a variety of special tests and inspections related to customer bill complaints, inquiries, and energy diversion investigations. Prepare related reports 9.) Assist with and perform distribution studies including inspection of distribution equipment, circuits, analysis, and preparing reports. 10.) Operate and perform work from aerial lift devices. 11.) Develop and provide employee training. MINIMUM REQUIREMENTS: Education requirements are listed below: Associate's degree in electrical/electronic technology. Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician). Work Experience requirement listed below: 24 months as a Meter Electrician B Required License(s)/Certification(s) are listed below: State Driver License. Must possess and maintain a medical certification card, if determined to be required by law. OTHER REQUIREMENTS: 1) Physical demand level is Not Yet Determined 2) To promote to this classification, individuals must successfully complete the Company training and qualification program for this classification including classroom instruction; written examination; job mentoring; and job performance demonstrations. This training and testing will occur during the minimum 24-month period that an employee will spend in the Meter Electrician B classification. 3) Work overtime as needed including extended daily shifts and weekends 4) Work late shifts as needed 5) Work independently under general supervision in a safe, efficient, and productive manner 6) Proficiently use computers and applications related to this classification 7) Effectively communicate with other employees, customers, and the general public in a courteous and appropriate manner 8) Promote a positive image of the Company to customers and the general public 9) Comply with all aspects of the AEP Corporate Code of Conduct 10) Report hazards and abnormal conditions 11) Attend and participate in training as assigned and assist in the training of other employees 12) Ability to walk long distances as determined by the Company 13) Ability to lift a 50-pound weight from the floor to a workbench These are additional expectations for the job and could include specific work experience, license / certifications, preemployment testing, expectations about travel, shift work, etc. Principal Line of Progression: From: Meter Electrician B To: Higher classification, if qualified Compensation Data Compensation Grade: U073-R32 Compensation Range: $34.69 - $47.62 The Physical Demand Level for this job is: M - Medium Work: Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Light Work. Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

Job DescriptionLicensed Journeyman Electrician - Travel Opportunities Across Arkansas | United Trades of America Company: United Trades of America Pay Range: $24-$30 per hour (depending on experience, certifications) Employment Type: Full-Time | Remodeling Dollar General Stores United Trades of America is expanding and actively seeking Arkansas Licensed Journeyman Electricians or Arkansas Licensed Apprentice Electricians to join our traveling crew in Arkansas. If you're a licensed electrician passionate about high-quality workmanship, safety, and teamwork, we want you on our team! About the Role: As a Licensed Journeyman or Apprentice Electrician, you will work on a Dollar General remodel projects. Key Responsibilities: Install, maintain, and troubleshoot electrical systems in a commercial environment. Read and interpret blueprints, schematics, and wiring diagrams to ensure accurate installation. Bend, cut, thread, and install conduit to precise measurements. Pull wire and terminate cable. Install and maintain lighting systems. Work independently or collaboratively with other electricians and construction teams. Follow all job-site safety protocols and OSHA regulations. Ensure timely completion of tasks without sacrificing quality or safety. Minimum Requirements: Active Journeyman Electrician License issued by the State of Arkansas (required). Minimum of 2-4 years verifiable commercial and/or industrial electrical experience. OSHA 10 or OSHA 30 Certification (required). Strong skills in conduit installation, wiring, and troubleshooting. Ability to work independently with minimal supervision. Must have personal hand tools and PPE appropriate for electrical work. Must pass a pre-employment drug screen and background check. Must be flexible and willing to travel across Arkansas for assignments. What We Offer: Competitive hourly wages ($24-$32/hr depending on experience and project scope). Consistent, long-term project work. Opportunities for career growth within a respected and expanding company. A professional environment committed to safety and worker success. About United Trades of America: At United Trades of America, we believe skilled tradesmen are the backbone of the construction industry. We provide dependable opportunities, strong support, and fair treatment to ensure your success on every project. How to Apply: Apply online today at *************************** or send your resume directly to *****************************. Questions? Text Marie at ************. United Trades of America is an equal opportunity employer. We value diversity and encourage all qualified candidates to apply.

We're seeking skilled Electricians for exciting projects in select cities across the US. We prioritize your safety and value your expertise. We offer flexible interview times and an easy-to-follow application process. Apply now to jumpstart your skilled craft career! Salary Range: $25 - $35 per hour Benefits: Paid Time Off Medical Retirement Here's what Skillit needs from you: Have strong electrician skills Ability to read and interpret documents such as safety regulations, operation and maintenance instructions, and procedure manuals Ability to work with tools, such as, power and non-powered hand tools Willing and able to follow instructions and ask clarifying questions Ability to handle materials that can weigh up to 200Ibs Strong attention to detail Here's what you'll be doing: Perform skilled work in maintenance, repair and construction of lighting and power as part of the electrical jobs. Ability to control electrical systems in a responsible and accurate manner. Perform complex electrical tasks, including wiring, conduit sizing and switchgear installation. Install and terminate bus feeders, motors, and controls, ensuring compliance with safety codes. Troubleshoot and repair energized circuits and electrical equipment. Supervise rough-ins, underground layouts, and installation preparation. Read and interpret blueprints and control wiring diagrams for installation planning. Possess the ability to understand construction and repairs from drawings or sketches, estimate materials, supplies and labor costs.

We are looking for both a Journeyman Electrician or someone to train as an Electrician Apprentice to work in electrical construction on commercial and industrial properties. Most tools will be provided along with all safety PPE. Ongoing training with the opportunity for advancement. A Robust benefits package that includes Health Insurance, Vision Insurance, Dental Insurance, 401K (matching), and Paid Time Off. Compensation is $40,000-$66,000 per year based on experience with overtime after 8 hours, time and a half on Saturdays and double time Sundays. We also pay for drive time over a 30-mile radius of the shop. Please provide a resume for call-back interviews. ESSENTIAL DUTIES An individual must be able to perform each of the following Essential Duties satisfactorily to perform this job successfully. This list is not intended to be an exhaustive list of all functions, responsibilities, skills, and abilities. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the position's Essential Duties, provided it does not create an undue hardship on the Company. * Measuring, cutting, bending, threading, assembling, and installing various types of conduit * May operate hand and power tools of all types (including but not limited to air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments) * May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, clean up rubble and debris * Cleans maintains, and services equipment and tools * Performs additional duties or emergency duties after normal working hours * Demonstrate a willingness to comprehend and follow instructions given by qualified electrical mentors * Work efficiently to ensure assigned tasks will meet deadlines * Record field wiring changes and modifications on blueprints for recording on master circuit diagrams * Follow and encourage others to follow OSHA, company, and site-specific safety procedures * Operate heavy equipment and machinery in the performance of these essential duties * Work with and around hazardous materials, as well as at heights and in confined spaces in the performance of these essential duties * Drive a vehicle to various job sites throughout working hours * Maintain a valid driver's license and a driving record that meets company policy * Work in a constant state of alertness * Regular attendance and punctuality are essential for employee job performance * Perform other duties as assigned Journeyman * Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications * Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures * Terminate wires to circuit breakers, transformers, devices, controls, and other components in accordance with the schematics, prints, drawings, or instructions * Hold a Journeyman license in the state you are currently working in * Record field wiring changes and modifications on blueprints for recording on master circuit diagrams Requirements EXPERIENCE Apprentice * 1 - 4 years Journeyman * 4+ years ENVIRONMENT, PHYSICAL AND MENTAL REQUIREMENTS * Exposure to varying outdoor conditions, loud noise, dust, toxic chemicals and materials, varying fumes or odors; slippery or uneven walking surfaces; and work in ditches/excavations * Work at heights, such as by working on ladders, scaffolds, platforms, tops of single and multi-story buildings, as well as working in confined spaces such as underneath single story and multi-story buildings * Must be able lift and carry up to 100lbs * Must be able to perform manual and repetitive tasks and body movements including standing and/or walking for long periods of time, bending, stooping, climbing, reaching, pulling, pushing, lifting, and carrying * Must be able to stoop, kneel, crouch, or crawl in awkward positions continuously * Must be able to work in overhead structures and around and beneath machinery * Must be able to complete job duties proficiently while adapting to changing demands and priorities * Must have the ability to work in a constant state of alertness and concentrate for long periods of time to perform duties in a safe manner * This position is subject to ergonomic testing SAFETY SENSITIVE This position is designated as a safety sensitive position because it includes as part of the job duties operating a motor vehicle, the operating, maintaining, and monitoring of heavy equipment and machinery, and working with and around hazardous materials, at heights, and in confined spaces. This position is one in which a lapse of attention could result in injury, illness, or death. For the safety of the employee and others, the employee must be able to work in a constant state of alertness and concentrate for long periods of time while operating a motor vehicle, operating, maintaining, and monitoring heavy equipment and machinery, and while working with and around hazardous materials, at heights, and in confined spaces. SKILLS AND COMPETENCIES * High school diploma or general education degree (GED) preferred * Actively developing an understanding and working knowledge of the NFPA 70 series, State, and local codes * Ability to understand, interpret and utilize blueprints, wiring diagrams, and schematics * Locate and diagnoses electrical malfunctions using various test instruments * Operate a variety of power tools, shop equipment, and electrical testing instruments * Ability and willingness to learn and perform duties normally associated with other areas * Ability to communicate clearly with others * Good organizational and time-management skills * All employees must provide and maintain the required tool inventory for this position * Ability and willingness to work overtime and non-standard schedule: nights, weekends and holidays as/if required * A current valid driver's license is required BENEFITS We offer a comprehensive benefits package to includes some of the following: * Low Medical, Dental, and Vision rates * Basic and Optional Life Insurance, Accidental Death & Disability * 401k Retirement * Paid Time Off * Paid Holidays * Education Assistance for trade school * Apprenticeship Program and Employee Training Courses * Overtime over 8 regular hours and Saturday work, Double-time on Sundays and holidays * Mileage Reimbursements and Per Diem * MCC supplies PPE and most tools