Electrical apprentice jobs in Columbus, OH

Job Posting End Date 12-20-2025 Please note the job posting will close on the day before the posting end date Perform all types of work involved in the construction, maintenance, rebuild, removal, operation, testing and inspection of energized or de-energized generation, transmission and distribution facilities. Assist in responding to emergency call-outs on station trouble and coordinating prompt restoration of service to customers as required. The following list sets forth the principal duties required with the degree of supervision normally given. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions: DIRECT SUPERVISION - When a qualified person is working with/hands-on with the person performing the designated task. IMMEDIATE SUPERVISION - When a qualified person is near the structure/equipment and is in constant visual and/or verbal contact to the person performing the designated task. GENERAL SUPERVISION - An employee of equal or higher classification, knowledgeable of the task at hand and not necessarily at the job site. QUALIFIED PERSON - Station Electrician or Supervisor who is knowledgeable of the task or work to be performed, and is capable of performing the appropriate emergency rescue. Job Description Station Electrician C-A: What You'll Do: * Work on energized equipment up to 260 volts. After six months in classification, employee shall assist in work on conductors and equipment energized at voltages above 750 volts with direct supervision or assistance of personnel in higher classification * Select proper prints and/or drawings for various work and have a basic understanding of each. * Use voltmeters, ohmmeters, ammeters, insulation meggers and other test equipment associated with station work. * Assist in disassembling and reassembling, inspecting, maintenance, and repairing of station transformers, circuit breakers, portable substations, rotating machinery, network protectors and transformers, air ducts and heat exchangers; install and maintain station batteries; replace nitrogen bottles and air filters. * Assist in station work such as installing conduit, pipe, cable and wire; use hand lines to pass tools and materials; dig and backfill trenches; remove and spread stone; uncrate equipment and material; install and remove portable substation fences, barriers and safety signs; paint structures and equipment; climb station structures. * Use various kinds of tapes, insulating materials, protective and insulating paints and varnishes, and understand proper application of each. * Assist in making visual inspections such as check lights, heaters, circuit breaker counters, oil levels, and bus connections; read gauges such as voltmeters, ammeters, hydrometers, pressure and level gauges; apply start-run-stop tests on emergency generators, water and sump pumps and fire engine motors. Report abnormal conditions. * Replace lamps, switches, duplex outlets, dry cells; install and maintain signal and communication systems * Assist in various tests involving oil samples, connecting and operating portable and stationary oil handling equipment. Assist in electrical tests, TTR, Doble, core megger and resistance for transformer testing, etc. * Assist in station switching including use of radio communication and/or direct instruction from higher classification, assist in checking equipment clearances and making de-energized tests, place grounds as directed. * Knowledge and proficiency in steel and aerial lift rescue. * Maintain records and prepare and submit reports as required. * Attend and participate in training and assist in the training of other employees as assigned. * Use and operate various company vehicles, specialized equipment, hand and power tools. * Operate company vehicles, cranes, aerial lifts and specialized equipment. Perform duties incidental to the operation of such equipment * Use hand and power tools; operate portable generators, blowers and pumps; inspect and store personal protective equipment. * Knowledge and use of various knots used in station work. * Perform similar or less skilled work as assigned. * Assist employees of equal or higher classification; direct the work of employees assigned to assist. * Become familiar with the Company's safety rules and practices and in the application of resuscitation and First Aid as presented in the Company's Safety Manual. * Perform duties in accordance with the Company's safety rules and operating regulations and practices. What We're Looking For: Station Electrician C: Education requirements are listed below: * Associate degree in electrical/mechanical/industrial maintenance technology or equivalent education and/or experience. * Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician); * or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another utility or contractor. Work Experience requirement listed below: * No previous work experience required. * Must be available to work overtime, call-out overtime and shift work, as required. * Travel requirements are expected > 50 % of the time Station Electrician B: Education requirements are listed below: * Two-year associate degree electrical/mechanical/industrial maintenance technology or equivalent education and/or experience. * Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician); * or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another electric utility or contractor. Work Experience requirement listed below: * Minimum of 24 months satisfactory work experience as a Station Electrician C or the equivalent (as determined by the Company through demonstration, examination and performance appraisal). Licenses/Certifications: * Valid Class A CDL is required Station Electrician A: Education: * Associate degree in electrical/mechanical/industrial maintenance technology or equivalent education and/or experience. * Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician); * or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another electric utility or contractor. Experience: * Minimum of 24 months satisfactory combined work experience as a Station Electrician B or Station Electrician B-Certified or the equivalent (as determined by the Company through demonstration, examination and performance appraisal). Licenses/Certifications: * Valid Class A CDL is required Physical demand requirements details are listed below: * Distance in feet to climb and work on a ladder/structure: 50 ft and higher Knowledge of print reading sufficient to interpret and apply information from drawings, instruction manuals, one-line diagrams, and associated documents. * Must satisfactorily complete, in such time frames as may be established by the Company, all required training to advance to the next higher classification in the line of progression, or vacate the current classification. * Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Station Electrician A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company. * Ability to deal with customers and other employees in a courteous and professional manner. * Ability to plan work and to properly instruct and brief others. * Employee shall obtain the appropriate valid commercial driver's license prior to the end of the designated probationary period. * Must meet all vehicle operation requirements ad designated by federal and/or state law. * Considerable travel and overtime may be required to complete work assignments. * Must successfully complete Physical Abilities Test (PAT) Physical demands required for this job include but not limited to: Minimum Requirement Station Electrician Amount of Weight Lifted from Floor/Ground to Waist Level: 75 Amount of Weight to be Carried for 20 Feet: 60 Amount of Weight Lifted to Chest Level:50Amount of Weight Lifted to Eye Level:30 Distance to Walk Accumulated over the Course of an 8-Hour Shift:½ Mile Distance in Feet to Climb and Work on a Ladder/Structure:50 and Higher Distance in Feet to Ascend to and Work in a Bucket/Lift:100 and Higher (Tested at 60') Ability to Discriminate between Colors:Yes (Tested) What You'll Get: Station Electrician C: $30.12- $33.49 Station Electrician B: $37.33- $38.49 Station Electrician A: $53.36 In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees. The power of AEP comes from our valued team of unique employees….the best in the business! We're proud to be one of the largest electric energy companies in the U.S., powering over 5 million homes and businesses, spanning across 11 states. We're passionate about making an innovative difference in the communities we serve. We're powering the future - today! Are you a skilled and motivated Station Electrician C-A seeking a new opportunity in the Columbus, OH vicinity? Join our team where you'll make an impact while contributing to the development and implementation of the systems and infrastructure needed to efficiently deliver energy services to our valued customers. Compensation Data Compensation Grade: U025-150 Compensation Range: $30.12 - $53.36 The Physical Demand Level for this job is: H - Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

Job Description Gibson Electrical LLC is seeking motivated and hardworking individuals interested in starting their careers as an Electrician. This full-time Pre-Apprentice position is ideal for those not currently in an accredited apprenticeship program but looking to take the first step toward becoming a certified Journeyman Electrician. As a Pre-Apprentice, you will work in a structured environment while gaining foundational knowledge in safety, tools, materials, equipment and the fundamentals of electrical construction. Key Responsibilities Assist Journeyman Electricians: Help with installations, repairs, and general electrical maintenance. Follow Safety Protocols: Learn and adhere to all safety guidelines on the job. Handle Tools & Equipment: Proper use and maintenance of hand and power tools. Learn Basic Electrical Concepts: Gain understanding of electrical systems, components, and circuitry. Perform Basic Tasks: Complete supervised entry-level tasks such as running wire and replacing fixtures. Read Blueprints: Develop the ability to interpret basic blueprints and schematics. Maintain Work Areas: Keep tools and materials organized and clean. Participate in Training: Attend workshops and training sessions to build knowledge and skills. Assist with Inspections: Help ensure work complies with electrical codes and standards. Communicate Effectively: Work closely with team members to report progress and address challenges. Qualifications & Requirements High School Diploma or equivalent Ability to read and understand written materials Valid driver's license and clean driving record Reliable transportation Must be able to pass drug/alcohol testing Flexible work schedule Must own basic hand tools (tool list provided upon hiring) No prior experience necessary, though relevant experience is a plus Physical Requirements Ability to sit, stand, walk, reach, climb, kneel, crouch, and crawl Lift or move up to 50 lbs Work Schedule Monday - Friday, 7:00 AM - 3:30 PM* *Subject to change. Must be flexible to accommodate project demands Compensation & Benefits Competitive wage based on experience and position Benefits package includes: Medical Dental Vision Paid Vacation & Holidays SIMPLE IRA, with up to 3% Employer Match Equal Opportunity Employment Gibson Electrical LLC is a Drug-Free Workplace and an Equal Opportunity Employer. We comply with all applicable laws and regulations and prohibit discrimination or harassment based on race, color, religion, sex, gender identity or expression, sexual orientation, age, disability, genetic information, veteran status, or any other protected characteristic. Must be able to pass a drug screening

Classification Purpose: The primary purpose of the Electrician classification is to install, repair and maintain electrical systems in county buildings and facilities. Job Duties: Install, repair, and perform skilled electrical construction. Diagnose problems and identify electrical systems and devices. Identify safety hazards related to electrical problems and take appropriate action to mitigate and correct problems. Perform preventative maintenance, install, diagnose and repair heaters, fans, appliances, transformers, fuses, motor control systems, UPS, emergency lights, generators, electrical systems, writing components and accessories. Install, diagnose, and repair light fixtures, ballasts, and fixture hardware. Replace light bulbs and tubes. Clean light fixtures. Operate machinery (e.g., machine lifts, bucket trucks, and vehicles). Prepare work area by removing furniture and debris, erecting barricades, and installing signage and safety tapes. Perform site clean-up and perform high skilled electrical work at journeyman level for construction projects. Prepare reports. Maintain inventory control of supplies, parts and equipment. Order parts and provide approved purchase order numbers to the appropriate vendors. Ability to read drawings and blueprints and understand specifications. Coordinate, oversee, and work with outside contractor for maintenance of electrical generators. Escort outside contractors to work site and assist with electrical system shut-downs. Maintain regular and predictable attendance. These duties are illustrative only and you may perform some or all of these duties or other job-related duties as assigned. Major Worker Characteristics: Knowledge of inventory control; safety practices; agency policy and procedures. Skill in skilled trade; equipment operation. Ability to apply principles to solve practical, everyday problems; add, subtract, multiply and divide whole numbers; complete routine forms; maintain accurate records; understand manuals and verbal instructions, technical in nature; cooperate with co-workers on group projects; demonstrate strength to lift up to 75 lbs., demonstrate strength to move objects from one location to another. Minimum Class Qualifications: Any equivalent combination of relevant training and experience including but not limited to: High school diploma or GED, supplemented by vocational/technical training with emphasis in electrical work and five (5) years of experience as a licensed Electrician. Additional Requirements: Must maintain a valid Ohio driver's license. Supervisory Responsibilities: None required. Unusual Working Conditions: May be required to wear personal protective equipment (PPE) to perform duties.

Job Description IES Residential, Inc. is one of the nation's largest and most respected electrical, plumbing, HVAC, solar, and cable solutions providers for single-family homes and multi-family complexes since 1973. We provide comprehensive integrated solutions that light up our world. We make homes come to life. IES is a national provider of industrial products and infrastructure services to a variety of end markets, including electrical, mechanical and communications contracting solutions for the commercial, industrial, residential and renewable energy markets. IES is publicly traded on NASDAQ under the symbol IESC. As of the end of IES's 2024 fiscal year ending September 30, 2024, IES produced over $2.8 billion in revenue and employed over 9,400 employees at over 131 domestic locations across the United States. IES is an Equal Employment Opportunity Employer: Minorities, Females, Gender Identity, Sexual Orientation, Individuals with Disabilities, Protected Veterans Encouraged to Apply. From office buildings to wind farms, industrial complexes to housing developments, our employees and design professionals design, build, and maintain the systems that empower lives. Our commitment to our employees is reflected by our actions: Safety is Priority One - and our record shows it Competitive Pay Company 401K plan with Employer Contribution Match Company Paid Time Off Company Paid Life Insurance Choice of Medical Coverage including Prescription and Short Term Disability Plans Choice of Dental and Vision Coverage Optional Long-term Disability, Critical Illness, Accident, Legal and Pet Coverage Auto and Home Insurance Discount Programs Responsibilities KEP Electric, a division of IES Residential, is a leading provider of electrical services specializing in residential new construction projects in the Ohio area. With a commitment to excellence and safety, we deliver high-quality electrical solutions to homeowners, builders, and contractors, ensuring the successful completion of every project. JOB SUMMARY: We are seeking an experienced and skilled Journeyman Electrician to join our team. The ideal candidate will have a strong background in residential electrical work, with a focus on installing and troubleshooting electrical systems in new single-family homes, multi-family projects, and light commercial. This role offers an exciting opportunity to contribute to high-quality construction projects while working alongside a team of professionals committed to excellence. Our culture is led by the Core Values of Safety, Family, Customer Experience, Humility, Training, Employee Engagement, Opportunity, and everyone's favorite Weird! The Core Values of our company is not just a poster we hang up on the wall so that it looks pretty, it's what connects us! Key Responsibilities: Install, maintain, and repair electrical wiring, fixtures, and equipment in new construction projects. Perform electrical rough-ins and trim-outs in accordance with National Electrical Code (NEC) and company standards. Read and interpret blueprints, schematics, and electrical plans to determine the layout and placement of wiring, outlets, switches, and fixtures. Collaborate with contractors, builders, and project managers to coordinate electrical work and ensure timely completion of projects. Troubleshoot electrical systems and identify and resolve issues or malfunctions in a timely manner. Adhere to safety protocols and regulations to ensure a safe working environment for yourself and others on the job site. Maintain accurate records of materials used, work performed, and hours worked on each project. Communicate effectively with team members, supervisors, and clients to provide updates, discuss project requirements, and address any concerns or questions. #ZR Qualifications Requirements: High school diploma or equivalent. Completion of a recognized apprenticeship program or equivalent work experience. Journeyman Electrician license or equivalent certification. Minimum of 3 years of experience in residential electrical work, preferably in new construction. Strong knowledge of electrical codes, regulations, and industry standards. Proficiency in reading and interpreting blueprints, schematics, and electrical plans. Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a team in a fast-paced environment. Valid driver's license and reliable transportation.

DAY TO DAY: Most of their work will be reactionary and will involve troubleshooting both mechanical and electrical systems. This person needs to have a strong sense of leadership and communication in order to gel well with the team. The employee will be a front-line supervisor, so they will be working on the line with their direct reports. Duties of this job will include changing out motors, pumps, and gear boxes as well. We are a company committed to creating inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity employer that believes everyone matters. Qualified candidates will receive consideration for employment opportunities without regard to race, religion, sex, age, marital status, national origin, sexual orientation, citizenship status, disability, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to Human Resources Request Form (****************************************** Og4IQS1J6dRiMo) . The EEOC "Know Your Rights" Poster is available here (*********************************************************************************************** . To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: *************************************************** . Skills and Requirements MUST: Troubleshooting Mechanical and Electrical systems Troubleshooting 3-phase equipment Pneumatic experience Reading blueprints and schematics Testing high and low voltage (up to 480) 5-10 years of experience

Traveling Electricians -Build Your Network with TradeWorX (Per Diem + Lodging + OT) Company: TradeWorX LLC Employment Type: Future project opportunities -Join our Electrical Workforce Network. This posting is not for one specific project -it's your opportunity to get on the list early for high-paying, traveling electrician work across the U.S. Apply once -quick and simple, no long forms. Your profile is added to our TradeWorX Electrical Workforce Network. Our team will reach out as projects come online that fit your skills and travel preferences. About TradeWorX TradeWorX is a skilled-trades contractor that partners with leading commercial, industrial, heavy civil, and energy clients across the U.S. We supply top-tier electricians and electrical professionals for large-scale projects -from data centers and solar sites to industrial shutdowns and heavy infrastructure. We're currently expanding our Traveling Electrical Workforce Network -a database of experienced, mobile electricians who are interested in travel work with paid per diem, lodging, and overtime opportunities on upcoming projects. Why Join the TradeWorX Network? By completing a quick application today, you'll be added to our preferred candidate pool for future travel projects across the country. When new projects launch, TradeWorX contacts network members first to confirm availability, pay rates, and assignment details. Benefits of joining: Early access to upcoming traveling electrical jobs Paid travel, per diem, lodging, and overtime Steady, project-based work with trusted national contractors TradeWorX safety-first culture -all crews are OSHA compliant and supported by our Corporate Support Center Opportunities in commercial, industrial, solar, EV infrastructure, and data center projects. Who We're Looking For We're building our network with: Journeyman, Apprentice, and Master Electricians Industrial / Commercial / Construction Electricians Electrical Foremen / Supervisors Candidates who are willing to travel nationwide Professionals who take pride in quality work, reliability, and safety Join the Network Today This posting is not for one specific project -it's your opportunity to get on the list early for high-paying, traveling electrician work across the U.S. Apply now to join the TradeWorX network and be first in line when the next project mobilizes. Work with the Best. Travel with the Best. #TradeWorX #LetsHitTheRoad

At Afrin Property Solutions, we are more than just a property services company-we are problem-solvers dedicated to excellence. We provide comprehensive maintenance and renovation solutions for both residential and commercial properties, specializing in roofing, siding, gutter services, and interior remodeling. Our reputation is built on reliability, quality craftsmanship, and unwavering commitment to our clients. We are looking for a skilled Master Electrician who shares our dedication to excellence to join our growing team. Key Responsibilities: Installation: Install wiring systems, electrical panels, outlets, and light fixtures in residential, commercial, or industrial buildings. Ensure that electrical systems are installed in compliance with local building codes and regulations. Run electrical conduits, cables, and other components necessary for system functionality. Maintenance & Repair: Perform routine inspections and maintenance on electrical systems to ensure safe and reliable operation. Diagnose electrical problems, such as malfunctioning circuit breakers, outlets, or wiring. Repair or replace defective components, including wiring, switches, transformers, and outlets. Safety Compliance: Follow safety procedures and standards to protect yourself and others from electrical hazards. Ensure electrical systems meet safety regulations, including proper grounding, insulation, and circuit protection. Keep work areas organized and free from safety hazards. Troubleshooting: Troubleshoot electrical issues by analyzing blueprints, circuit diagrams, and schematics. Use specialized tools and diagnostic equipment to identify and resolve problems. Offer solutions to prevent recurring issues, ensuring long-term reliability. Customer Interaction: Provide excellent customer service by explaining repairs, installations, or upgrades clearly to clients. Advise clients on energy-saving strategies, system improvements, and new technologies. Documentation & Reporting: Complete reports, work orders, and other documentation for jobs performed. Keep track of inventory, tools, and materials required for projects. Ensure compliance with local, state, and national electrical codes. Skills and Qualifications: Completion of an apprenticeship or vocational training program. Valid electrician's license Strong understanding of electrical systems, wiring, and circuits. Knowledge of national and local electrical codes. Ability to read blueprints, diagrams, and schematics. Familiarity with electrical testing tools and equipment. Attention to detail and strong problem-solving skills. Good communication skills for working with clients and teams. Physical stamina to perform manual labor and work in various environments. High school diploma or equivalent. Physical Demands: Lifting heavy tools and equipment. Ability to work in tight spaces, climb ladders, and work at heights. Standing for extended periods, bending, or kneeling may be required. Powered by JazzHR w22Owq4fgn

The Olen Corporation and Area Aggregates, one of the largest construction aggregates producers in the Midwest, has been a leader in the industry for over 50 years. With multiple locations serving Central, Northeast, and Northwest Ohio, Olen is dedicated to providing top-quality aggregate products, including natural sand, gravel, and limestone, to a diverse range of customers. As an ODOT 1069 prequalified aggregates supplier, Olen sets the standard for quality and service in the industry. Producing over 8 million tons of construction materials each year, Olen is a top thirty-five national producer of quality construction aggregates. Since 1986, Olen has partnered with Kokosing to be one of their top suppliers of construction materials. Committed to excellence, Olen is focused on delivering exceptional customer service while being responsible stewards of the environment and respectful neighbors in the communities we serve. : POSITION SUMMARY: As part of our operations team, the Electrician will provide support to keep our equipment, processing plants, and site facilities operating. This is a great opportunity for someone mechanically inclined, eager to learn, and ready to build a career in an exciting industry. We provide education, training, safety instruction, and opportunities to grow your skills while working alongside experienced team members. Home base for this position will be at the Columbus Plant. ESSENTIAL DUTIES AND RESPONSIBILITIES: Assist with installing, maintaining, and repairing electrical wiring, motors, and equipment. Learn how to troubleshoot and repair controls, drives, and electrical components for conveyors, crushers, pumps, and other mining machinery. Read and follow diagrams, schematics, and instructions to complete jobs safely and correctly. Help with regular equipment inspections and basic preventive maintenance tasks. Use tools and testing equipment under the guidance of experienced electricians. Work closely with fellow team members to ensure operations run smoothly. Follow all mine safety requirements, including lockout/tagout and electrical safety rules. EDUCATION/EXPERIENCE: High school diploma or equivalent. Desire to develop electrical knowledge and skills and working in a constantly changing environment. Ability to use hand tools and follow safety instructions. Mechanical aptitude and problem-solving skills. Comfortable working outdoors in a physically active role. Be a team player with a positive attitude and willingness to take on new challenges. KNOWLEDGE, SKILLS, AND ABILITIES - REQUIRED: High school diploma or equivalent. Working knowledge on use of a multimeter and other basic electrical tools. Safety 24/7 attitude and practice. Skilled in using basic hand tools and power tools. Ability to understand basic math and read a tape measure accurately. Detail-oriented with a focus on quality work. Self-starter who works well independently and in a team environment Ability to inspect equipment and identify defects and safety concerns. Willingness to learn troubleshooting best practices for electrical and mechanical systems. Comfortable working at elevated heights and changing conditions with proper PPE and safety equipment. ADDITIONAL KNOWLEDGE, SKILLS, AND ABILITIES - PREFERRED: Experience with industrial maintenance, repairs, and lighting systems. Working knowledge of the use of computers for reporting, scheduling, and other work tasks. Knowledge and ability to learn electrical safety procedures. Arc Flash Certification. Lockout/Tagout (LOTO) Certification. Valid electrician license or certification as required by local/state regulations. Experience and task trained in the operation of a man lift or bucket truck. Conduit installation and maintenance experience. Experience with work orders, procurement, and inventory management. Workday application experience. Understanding of NEC (National Electrical Code) and MSHA regulations. CERTIFICATIONS, LICENSES, AND REGISTRATIONS: Must maintain a valid driver's license WORKING ENVIRONMENT: Extended work hours in difficult environments, including dust, noise, vibration, weather, and varying temperatures. Travel is required, including some extended stays and varying locations. Please note: this is intended as a general summary of the position; however, the individual will be expected to perform any functions or responsibilities that may be assigned from time to time. The functions and responsibilities of the position may change over time, in special circumstances, or on an individual basis. This job description is not intended to limit or otherwise impact the work to be performed or assigned. Olen offers a competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. Olen is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class.

Job DescriptionWho We Are Alene Candles LLC & Midwest is a private label, contract manufacturer that produces high-quality candles for some of the world's most recognized retail, boutique, and cosmetic brands. With our headquarters in New Hampshire and locations in Ohio, we've been in business for over 30 years. We are passionate about making the best products in the world, making safety our number one priority, and being an insanely great place to work. The Position Alene Candles is seeking an Electrician to be responsible for servicing, maintaining, repairing, cleaning, testing, adjusting, removing, constructing and operating electrical systems, equipment, machinery, control systems, ups systems, emergency power systems, laboratory systems and alarm systems. You will work under supervision or independently with other trades, contracted personnel and research staff, demonstrating knowledge of electrical theory, code requirements, procedures and techniques in safely performing assigned duties with up to medium voltage circuits. The Location We are located at 8860 Smith's Mill Road, New Albany, OH 43054. This is an onsite position in a climate controlled environment. Hours This position will be based on 1st shift (5:00 am-1:00 pm), however we will also consider candidates interested in working a split shift covering 1st and 2nd shifts. Please note, you may be required to work after normal business hours including weekends for power shutdowns, maintenance, repairs, installations, etc. on an as needed basis. Additional Job Details ELECTRICAL INSTALLATION & MAINTENANCE: Install and maintain a variety of electrical equipment including fixtures, conductors, raceway systems, grounding systems, panel-boards, transformers, motors, controls, over-current protection, fire detection and alarm systems, appliances, communications systems, actuating devices, security-related components, and other equipment. DOCUMENTATION & REPORTING: Maintain records of test reports, blueprints, as-built plans, and other documentation. Report on the status of assigned equipment maintenance, repairs, capacities and efficiency to the supervisor. Prepare written requirements for repairs or for ordering parts from suppliers. SAFETY PROCEDURES & HAZARD ANALYSIS: Develop work procedures which identify tasks/steps and conduct hazard analysis to ensure safe working conditions and compliance with applicable guidelines. SYSTEM TESTING & FAULT DETECTION: Examine and test elements of electrical systems to locate faults, defects, and unsafe conditions using appropriate diagnostic equipment and techniques. CROSS-FUNCTIONAL COORDINATION: Coordinate with other Maintenance staff and contractor staff to accomplish work on new and renovated space, ensuring compliance with applicable company guidelines as well as national, state, and local regulations and requirements. CUSTOMER RELATIONS: Maintain good working relationships with staff and internal customers by displaying positive outlook and friendly relationships. TROUBLESHOOTING & REPAIR: Correct problems in electrical systems by troubleshooting circuits, replacing defective equipment such as over-current protection, wiring, motors, starters, and other related electrical parts, and removing items from power supply to halt unsafe operation. PREVENTIVE MAINTENANCE PROGRAM: Implement an effective preventive maintenance program using the site's computerized maintenance management system (CMMS). Perform preventive/predictive maintenance, repairs and adjustments on systems and controls, monitor and record effectiveness of maintenance activities and take corrective actions. SPECIAL ASSIGNMENTS: Perform special tasks requiring similar duties and responsibilities, as assigned. Required Qualifications Must be a Journeyman Electrician or nearly complete with the Journeyman path. Must have the training acquired of a 5 year period. Must understand and apply knowledge of regulatory codes and requirements, including the National Electric Code and local codes Skill in interpreting schematic drawings, charts, and technical instructions Preferred Qualifications Ability to work with minimum supervision by prioritizing and coordinating multiple assignments, initiating action, taking responsibility for completion of assignments, and communicating progress to customers and management Must be self-motivated with initiative to actively pursue opportunities and training to maintain craft specialty skills and certifications Good oral and written communication skills and customer service skills Familiarity with operation of personal computers and Microsoft Office (Word, Excel, Outlook) Experience with software commonly used for tracking and reporting system status in CMMS systems Ability to follow through and carry out assignments effectively Benefits Alene offers a host of competitive benefits for full-time employees, some of which include: Medical, Dental, and Vision with a Healthcare Reimbursement Account, 401(k) with company match, Basic Life Insurance (100% company paid), Employee Assistance Program, Flexible Spending Account, Paid Holidays, Paid Time Off, Tuition Reimbursement and “Alene Gives Back” - our paid volunteer program. Alene Candles provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Should you require assistance completing this application or during any phase of the interview process, please contact ********************* or call ************ and ask to speak to Human Resources. We will make every effort to accommodate your needs in a reasonable amount of time.

For almost 60 years, Converse Electric has been serving Columbus and the surrounding areas in all types and sizes of electrical projects, specializing in commercial and industrial projects -with solutions including new construction, remodels and additions, design/build, lighting control, fire alarm and more. Job Description The ideal candidate will have experience in the installation, alteration, addition and/or repair of electrical systems. As our Journeyman Electrician, you should be able to: Perform all electrical tasks with general supervision Read blueprints Understand and be familiar with rough-in work Install feeders Size wire and conduits Install and terminate switchgear and devices Prepare layout for installation, including underground layouts and rough-in Comprehend electrical theory and NFPA 70 National Electric Code If you have experience in the following, it's a plus: Install, troubleshoot and terminate control wiring per drawings Troubleshoot motors and controls Fire alarm systems (with current fire alarm license) Additional Information At Converse, we value our people and it shows through testimonials from our own field team: “Converse offers knowledge, work, growth, innovative ideas, a competitive wage and a skilled trade to our industry.” “I have been at Converse Electric for 20 years. From day one they have treated me like family.” “Converse is a great place to work because of the family like atmosphere. There is great camaraderie among the employees.”

Apply Now at Apex Pros Full-Time | No On-Call | Dispatched from Home Apex Plumbing, Electric, Heating, and Air is expanding and looking for an experienced Residential Service Electrician to join our team in the Dayton area. At Apex, we're not just another contractor we're a team committed to professional excellence, customer satisfaction, and cutting-edge solutions in home services. If you're a highly skilled electrician who takes pride in craftsmanship and values a company culture that supports growth and work-life balance, we want to hear from you. What You'll Do: Install, maintain, and repair residential electrical systems in accordance with local codes and safety standards Perform inspections and troubleshooting, identifying issues and providing efficient, cost-effective solutions Read and interpret blueprints, schematics, and technical diagrams Communicate effectively with homeowners, team members, and contractors to ensure project expectations are met Manage daily service calls independently while also contributing to a team-focused work culture Ensure a clean, professional job site and a respectful customer experience every time Requirements What You Bring: Minimum 5 years of residential electrical experience (Required) Valid Driver's License (Required) Deep understanding of residential electrical systems, components, and safety protocols Knowledge of local electrical codes and best practices Ability to read and interpret blueprints and wiring diagrams Strong problem-solving and troubleshooting skills Excellent communication and customer service abilities Self-starter mindset with the ability to manage your own schedule and workflow Benefits 401(k) 401(k) 3% Match Dental insurance Employee discount Flexible schedule Health insurance Health savings account On-the-job training Paid time off Referral program Safety equipment provided Vision insurance

Job Details Sutphen Corporation - Dublin, OH High School Sutphen Corporation is the oldest continuously family-owned and operated fire truck manufacturer in the United States of America. With a mission to build the safest, most reliable fire trucks in the world, Sutphen has manufactured emergency fire apparatus for fire departments all over the country for more than 135 years. Sutphen is seeking an electrical installer to join our team in Dublin, Ohio. In this role, you will be responsible for installing and maintaining the electrical systems in fire trucks, including wiring, lighting, sirens, and communication devices. They ensure that all electrical components are functioning properly to support emergency responders. This role requires strong technical skills and attention to detail to ensure the safety, quality, and effectiveness of the fire apparatus and the people/property it protects. Why Join Team Sutphen? Safety is our priority Family-owned and operated First shift operation A collaborative and challenging environment fostering high engagement and retention We have fun building the highest quality product that saves lives and property

at Freedom Forever Join an established and innovative company in the fast-growing solar industry and enjoy strong pay rate + biweekly install bonuses + benefits + advancement opportunities! We offer an extensive benefits package which includes: Medical Insurance Dental Insurance Vision Care Insurance $50K Life Insurance 401K Medical Reimbursement Accounts (HSA & FSA) Employee Assistance Program Paid Time-Off Biweekly Install Bonuses STRONG Pay + Install bonuses + Benefits + Opportunities for Advancement + POSITION SUMMARY: The Electrician is responsible for providing the technical expertise to safely plan and perform electrical work for residential solar projects. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: Safely plan and complete Main Panel Upgrades (MPU), GMA's, Battery backup installs, and other major electrical work Ensure that the work is performed in a neat and workmanlike manner and compliant with all State and local codes and standards Assemble all components of a residential solar system Diagnose and troubleshoot system components to resolve electrical issues Interface with branch leadership to ensure compliance with electrician/labor ratios and continuing education requirements Follow OSHA, NEC, AHJ and Utility requirements Work with crew and complete all portions of Photovoltaic systems installs (PV) Diagnose and troubleshoot electrical components and system issues. Follow all safe work practices. Provide top-notch customer service throughout the installation Upload photos and update job status in the company database when work is complete Strong knowledge and experience of conduit bending (EMT) ability to produce quality day after day. Perform service maintenance and repairs as needed Perform other related duties, as assigned. Document work by taking pictures and completing work orders QUALIFICATION REQUIREMENTS: Experience: Minimum 3 years of electrical installation and repair experience Must have working knowledge and experience replacing residential electrical services and distribution panels Must be experienced with all required hand and power tools associated with the electrical trade Ability to drive a vehicle during the normal course of business Must maintain a clean driving record with the ability to pass a driving background check Working knowledge of current NEC codes Ability to effectively manage work to achieve required timelines Strong interpersonal/human relations skills Ability to read and interpret single- and three-line drawings Ability to work safely in a branch/warehouse Ability to interact with co-workers and participate in meetings PHYSICAL DEMANDS AND ABILITIES Use their hands to handle, control, or feel objects, tools, or controls Stand for long periods of time Climb ladders, scaffolds, or poles Kneel, stoop, crouch, or crawl Bend, stretch, twist, or reach out Repeat the same movements See details of objects that are less than a few feet away Determine the distance between objects Use fingers to grasp, move, or assemble very small objects Use one or two hands to grasp, move, or assemble objects Understand the speech of another person See differences between colors, shades, and brightness React quickly using hands, fingers, or feet While looking forward, see objects or movements that are off to the side Lift 50+ pounds TRAVEL REQUIREMENTS (Employee is required to travel for business purposes, not including commute to and from work.) If required to travel, must have a valid Driver's License/Insurance and the ability to drive a personal vehicle to different sites. Freedom Forever is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: veteran status, uniformed service member status, race, color, religion, sex, sexual orientation, gender identity, age (40 and over), pregnancy (including childbirth, lactation and related medical conditions), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics) or any other consideration protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers. Employees of Freedom Forever must submit to a criminal history check, MVR check and a 9-panel drug screen that includes the following: Amphetamines, Cocaine Metabolites, Opiates, Phencyclidine (PCP), Barbiturates, Benzodiazepines, Methadone, Methaqualone, Propoxyphene. Job based in Ohio not seeking remote employees. rbt

Job DescriptionBenefits/Perks Flexible Scheduling Competitive Compensation Career Advancement Opportunities We are seeking a skilled Electrician to join our team! You will be responsible for installing and repairing wiring, electrical fixtures, and control equipment, as well as training apprentices on the job. If you are a Journeyman Electrician with a can-do attitude who takes pride in his work, we want to hear from you. Responsibilities: Follow all safety rules and regulations Maintain a clean and safe work environment Use blueprints, sketches, or building plans to determine electrical requirements and materials needed Install new electrical systems and repair existing systems Provide bids for work orders Interact with customers, suppliers, and other professionals Qualifications: Journeyman Electrician License Previous experience as an Electrician is preferred Valid Drivers License Ability to stand for long periods and lift heavy objects Strong understanding of mathematical concepts and measurements Professional appearance and courteous personality

MACHINES AND EQUIPMENT Drill presses, grinders, pipe threaders, hoists, conduit benders and similar or equivalent equipment required to complete the job. Set up and monitor cold end inspection equipment WSI, CYCLOPS, plug gage machines, and RobotsGAUGES AND TOOLSVarious large and small electronic measuring and testing devices, miscellaneous hand tools, and similar or equivalent tools/equipment. PC Based Diagnostic tools included. ( Use PC/Laptop to diagnose control issues. ) PRODUCTS OR MATERIALSAll materials associated with the repair and maintenance of plant equipment and similar or equivalent products and materials. WORK GUIDES AND INSTRUCTIONSGeneral verbal and occasional written instructions. Operate from complex blueprints and drawings. QUALITY REQUIREMENTSPerform work of satisfactory quality and quantity in accordance with plant operating procedures. Maintain overall quality awareness. WORK DESCRIPTION-Reason through and analyze complex problems associated with equipment and operational malfunctions. -Perform trouble-shooting functions to the board component level. -Work safely around voltages up to 69KV, aware of danger and always use appropriate PPE. -Install, inspect, adjust, repair and maintain all electrical and electronic equipment. -Understand plant power distribution system including 11 substations and over 3000 disconnecting locations. -Responsible for complex work planning in support of production schedules. -Make overall electrical repairs on plant equipment or high voltage lines. -Troubleshoot Boiler controls, hydrogen reformer (cracked gas) controls, AP5 controls -Calibrate and adjust instruments as required. -Troubleshoot motors and motor starters up to 4160V, servo drives and motors, prox switches, solenoids, limit switches -Interpret and maintain analysis information/calculate results. -Document complete daily activities cause and repair, log to equipment, using forms and shift notes-Troubleshoot cold end robots, servo pick n place including the use of associated pendant or hand controller. -Always follow Lock Out , Tag Out procedures-Maintain quality housekeeping and good safety practices in the work area. -Must complete required training (experience) as a qualification for this position. -Do other work as assigned by supervision.

Job Title: Electrician Department: Production Reports To: Job Type: Full-time Travel: Minimal Compensation: $28.00- $33.00 an hour For more information on Ohio job opportunities, please reach out to Laura Hannum at ************. Job Summary: The Electrician I is responsible for performing a wide range of skilled duties in the installation, modification, design, maintenance, and repair of electrical systems and equipment used in Trillium Farms' daily operations. This role works under minimal supervision and is essential for ensuring the proper functioning of electrical machinery and control systems. Essential Job Functions: Install, maintain, and repair electrical control systems, wiring, and lighting systems. Read and interpret technical diagrams and blueprints. Perform general electrical maintenance and repair tasks. Inspect transformers, circuit breakers, and other electrical components to ensure proper functioning. Troubleshoot electrical issues using appropriate testing devices. Repair and replace equipment, electrical wiring, or fixtures as necessary. Ensure compliance with the National Electrical Code and local building regulations. Perform circuit breaker corrective maintenance. Maintain good knowledge of heating, air conditioning, and other mechanical systems. Utilize various test equipment to ensure systems and components are operating correctly. Perform physically demanding tasks such as crawling, climbing, and standing for extended periods. Knowledge, Skills, and Abilities (KSAs): Technical Skills: Knowledge of electrical systems, power generation, mechanical systems maintenance, and industrial control systems. Soft Skills: Excellent troubleshooting and problem-solving skills, strong time-management abilities, and attention to detail. Industry Knowledge: Familiarity with National Electrical Code, OSHA safety standards, and regulations. Tools/Software Proficiency: Ability to read and interpret schematics and blueprints. Basic computer and report writing skills. Required Qualifications: High School Diploma or GED required. Trade school or relevant certifications are preferred. Motivated self-starter with the ability to manage projects, people, and make decisions independently. Ability to read and interpret electrical schematics, blueprints, and other technical documents. Ability to perform physically demanding tasks, including lifting heavy objects, climbing ladders, and crawling. Knowledge of electrical systems maintenance, repair, and troubleshooting. Familiarity with parametric and industrial control systems. Strong communication skills and ability to work well with all levels of employees and management. Ability to work weekends and holiday hours when required. Preferred Qualifications: Electrician certification or degree from an accredited technical college or university. Previous experience in a manufacturing or industrial environment. In-depth knowledge of heating, air conditioning, and other mechanical systems. Work Environment: The position involves working in a manufacturing environment, where employees may be required to stand for extended periods, climb ladders, crawl, or perform other physically demanding tasks. Employees may occasionally need to lift and/or move up to 50 pounds and work in a variety of environmental conditions. About Us: Versova is one of the largest egg producers in the United States, bringing together family-owned farms in Iowa, Ohio, Washington, Oregon, Idaho, Utah, and Colorado. With over six decades of industry experience, our team of more than 2,000 employees is dedicated to exceptional flock care, environmental stewardship, and producing safe, high-quality eggs. More than just a workplace, Versova is a team built on shared values, working together to enrich our communities and uphold the highest ethical standards. As a family of companies and a company of families, we are guided by a strong set of Core Values: Recognition, Initiative, Safety & Security, Service, Community, Respect, Integrity, Ownership, and Excellence. These values drive our commitment to responsible employment, sustainability, and industry innovation. When you join Versova, you become part of something bigger - working together to lead the future of egg production with integrity and excellence. Benefits: Regular performance reviews Health insurance Dental insurance Vision insurance HSA with company match Paid time Off Paid Holidays 401K with company match Tuition Reimbursement Employee Assistance Program $2,000 sign on bonus $1,000 referral bonus Posting Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, genetic information, military status, marital status, pregnancy, gender identity, sexual orientation, or any other characteristic protected by local law or regulation. Disclosure This job description is not exhaustive, as employees may perform additional related duties as needed. Employment is based on an 'at-will' basis. Employment is contingent upon the successful completion of a background check, as applicable to the role and in compliance with local, state, and federal laws.

IS FOR LOCAL WORKFORCE IN THE COLUMBUS, OHIO AREA AND DOES NOT PAY PER DIEM. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year, having no signs of slowing down. Our company grew through challenging and interesting opportunities that placed us in ENR's (Engineering News-Record) top 50 electrical contractors nationwide! Join Ace Electric for a chance to work with a highly supportive and proficient team, as well as build your career with Ace University! We value the hard work of our employees, always striving to enhance skills and a positive employee workplace. Since our inception in Valdosta, GA in 1975, Ace has been performing quality electrical installations in a full range of markets including: commercial, mission critical, education, healthcare, institutional, industrial, correctional facilities, hospitality, military bases, retail and others. In the past 15 years, locations have been added in Macon, GA, Atlanta, GA, Jackson, TN, Statesboro, GA, Sanford, NC and Plain City, OH. Ace offers fabrication services, hard bid, design-build, negotiated contracts and fee-based work. We have the resources, professional staff and project management team to handle almost any type of electrical project. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year and has no signs of slowing down! Our Mission is to Identify, Hire, Train and Retain the very best people! Could that be you? Benefits: * Health, Dental, Vision, Life, Disability, Accident and Critical Illness Insurances * 401k with Match * Access to Ace University: Apprenticeship Program, Leadership Training, Skill Building Classes and much more! General Summary: The Foreman will support the Superintendent or Project Manager in the oversight of the operations and field personnel responsible for the installation, additions, and/or repairs of electrical systems, conductors, and associated materials/equipment for the assigned job. The Foreman functions as a crew leader or team lead on Job Project tasks or on smaller jobs. Preferred Job Skills: * Strong commercial and industrial electrical background. * Bilingual in Spanish and English, preferred. * Strong troubleshooting skills utilizing sophisticated test equipment (DMM, Megger, PQM, UCT, IR Camera, etc.). * Strong knowledge of the National Electric Code (NEC). * Ability to safely operate and maintain a specialized electrical service vehicle. * Able to maintain professional appearance and conduct at all times. * Able to demonstrate necessary computer and keyboard skills. * OSHA 30 Hour, CPR, and First Aid trained. * Ability to manage customer and company specific information and documentation in an organized manner. * Able to maintain high levels of productivity, meeting deadlines while maintaining accuracy. * Must be an effective and professional communicator, both written and verbally. * Able to be on twenty-four hour call on a rotating basis, as needed. Mandatory Hiring Requirements: References, Background Check, Drug Screen Testing, Valid Driver's License. Responsibilities: * Responsible for leading and directing all field personnel involved in the assigned project or task. * Responsible for the planning of the project or task in the most efficient and profitable manner. * Ensure all materials are ordered and received in a timely manner to ensure compliance. * Necessary to have and maintain certain personal tools as directed by leadership. * Will read and comply with all guidelines provided in the Employee Handbook, Safety Manual, or Policy and Procedure Manual, and will require any field employees under their leadership to do the same. * All other duties as assigned. Position Requirements: * License: Valid state driver's license. * Certification: None required. * Education: High School Graduate/GED required. * Experience: Minimum of 6 years electrical experience preferred. Working Conditions: * Job requires working in all elements, depending on job location, time of year, heat, cold, rain, or snow. * Job requires employee to have required personal tools with him at all times (waist tool belt as worn weighs approximately 30 lbs.). * Work from all types of ladders and be able to transport/relocate ladders unassisted. * Employee's personal weight with tools cannot exceed the rated weight capacity of ladders used. * Perform work at various heights, up to 90 feet from ladders, scaffolds, aerial lifts, cat walks and other safe work areas. * Work in restricted areas (switch gear-room, manholes, utility tunnels and crawl spaces). * Wear personal protective equipment as required. * Able to work 40 hours per week plus overtime as required, to include night shifts. Required Physical/Mental Functions: * Positively identify colors of wire and other items as required. * Comprehend reading of blueprints drawings, and schematics same. * Comprehend and practice safe work procedures as outlined in Company Safety Handbook. * Operate company truck with manual and automatic transmission. * Read and interpret maps, instructional manuals, work site directions, and written instructions. * Must hear and see well (either natural or with correction). * Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead. * Able to lift objects weighing up to 50 pounds, with frequent lifting and carrying of objects weighing up to 20 pounds. * Tolerant to prolonged standing and movement on foot. * Climb ladders (all types). * Repetitive use of arms, hands, and fingers AAP/EEO Statement: Ace Electric, Inc. is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identification, national origin, disability status, protected veteran status, or any other category protected by federal, state, or local law.

Gibson Electrical LLC is seeking motivated and hardworking individuals interested in starting their careers as an Electrician. This full-time Pre-Apprentice position is ideal for those not currently in an accredited apprenticeship program but looking to take the first step toward becoming a certified Journeyman Electrician. As a Pre-Apprentice, you will work in a structured environment while gaining foundational knowledge in safety, tools, materials, equipment and the fundamentals of electrical construction. Key Responsibilities Assist Journeyman Electricians: Help with installations, repairs, and general electrical maintenance. Follow Safety Protocols: Learn and adhere to all safety guidelines on the job. Handle Tools & Equipment: Proper use and maintenance of hand and power tools. Learn Basic Electrical Concepts: Gain understanding of electrical systems, components, and circuitry. Perform Basic Tasks: Complete supervised entry-level tasks such as running wire and replacing fixtures. Read Blueprints: Develop the ability to interpret basic blueprints and schematics. Maintain Work Areas: Keep tools and materials organized and clean. Participate in Training: Attend workshops and training sessions to build knowledge and skills. Assist with Inspections: Help ensure work complies with electrical codes and standards. Communicate Effectively: Work closely with team members to report progress and address challenges. Qualifications & Requirements High School Diploma or equivalent Ability to read and understand written materials Valid driver's license and clean driving record Reliable transportation Must be able to pass drug/alcohol testing Flexible work schedule Must own basic hand tools (tool list provided upon hiring) No prior experience necessary, though relevant experience is a plus Physical Requirements Ability to sit, stand, walk, reach, climb, kneel, crouch, and crawl Lift or move up to 50 lbs Work Schedule Monday - Friday, 7:00 AM - 3:30 PM* *Subject to change. Must be flexible to accommodate project demands Compensation & Benefits Competitive wage based on experience and position Benefits package includes: Medical Dental Vision Paid Vacation & Holidays SIMPLE IRA, with up to 3% Employer Match Equal Opportunity Employment Gibson Electrical LLC is a Drug-Free Workplace and an Equal Opportunity Employer. We comply with all applicable laws and regulations and prohibit discrimination or harassment based on race, color, religion, sex, gender identity or expression, sexual orientation, age, disability, genetic information, veteran status, or any other protected characteristic. Must be able to pass a drug screening

Job Details Sutphen Urbana - Urbana, OH High School Sutphen Corporation is the oldest continuously family-owned and operated fire truck manufacturer in the United States of America. With a mission to build the safest, most reliable fire trucks in the world, Sutphen has manufactured emergency fire apparatus for fire departments all over the country for more than 133 years. Sutphen is seeking an electrical installer to join our growing team in Urbana, Ohio. In this role, you will be responsible for installing and maintaining the electrical systems in fire trucks, including wiring, lighting, sirens, and communication devices. They ensure that all electrical components are functioning properly to support emergency responders. This role requires strong technical skills and attention to detail to ensure the safety, quality, and effectiveness of the fire apparatus and the people/property it protects. Why Join Team Sutphen? Safety is our priority Family-owned and operated First shift operation High-quality and extremely affordable benefit packages A collaborative and challenging environment fostering high engagement and retention We have fun building the highest quality product that saves lives and property