Electrical apprentice jobs in New Orleans, LA - 41 jobs

Help electricians by performing duties include using, supplying or holding materials or tools, and cleaning work area and equipment. They also measure, cut, and bend wire and conduit, using measuring instruments and hand tools. Requirements Must be able to measure, cut, and bend wire and conduit, using measuring instruments and hand tools.

Assist in the installation of supports, cable tray and conduit. Assist with cable installation and tie wrapping. Assist with the mounting of electrical components. All tasks performed under direct supervision. Assist with installation of cable tray and conduit Assist with the mounting of electrical components and end devices Assist with pull and tie wrapping of cable and wire Assist with the demolition of cable and conduit runs with supervision Assist with packing and pouring conduit seals Learning to use tools of the trade Able to follow directions Learning to recognize and avoid safety hazards and dangers This is an entry-level position. All functions performed under direct supervision

Job Description The Electrician role collaborates closely with our electrical installation teams, ensuring that all company policies and procedures are upheld to the highest standards. This role involves managing daily electrical tasks according to specific job requirements and following the guidance of the electrical team lead. It's essential for the electrician to effectively execute all project duties in line with company standards, adhering to established operating procedures. Requirements Knowledge of electrical codes and best practices Print reading, design and electrical layout Install equipment, install conduit and fittings, pull wire, terminate Test and record wiring for insulation resistance and IV curve tracing as needed Configure basic electrical devices Ensure accurate electrical take-off and procurement Maintain company vehicle and vehicle stock Ensure code compliance and clean work and jobsite Meet technical requirements of equipment and site conditions Troubleshoot and repair malfunctioning equipment and systems Effectively execute installation work, customer interaction, and safety guidelines Role models the Solar Alternatives organizational culture daily. Qualifications 3+ Years Journeyman Electrician Familiarity with construction and electrical work terminology Self-driven work ethic and good time management Ability to use online scheduling and communication tools Clean driving record and valid license Verifiable job references Comprehensive familiarity of 2014 and 2017 NEC 40-50+ hours per week, 5-6 days per week Preferred but not required: Power generation experience OSHA Certification (10 or 30 hour) Associates or greater college education NABCEP or equivalent certification Physical Demands & Work Environment: Ability to work unsupervised and occasionally lift up to 50 pounds. Regularly required to stand, walk, sit, and use hands/fingers. Ability to travel as required. Work performed in office, or customer installation locations. Benefits COMPENSATION and BENEFITS: Salary starts at $25-35/hr based on qualifications, plus opportunities for sales bonuses. Benefits include majority-paid medical, dental, vision and matching 401K program. Earned paid time off starts at two weeks annually.

About Us At our Company, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At our Company, stability, innovation, and growth are more than just values-they are the pillars of our continued success. Exciting News About Our Future! Our company is currently undergoing an exciting brand transformation, including a change in our name. As part of this process, you may see references to both our current name, Bernhard, and our future name, ENFRA, during your application process. This change reflects our commitment to growth, innovation, and providing even greater value to our employees, customers, and community. We appreciate your understanding during this transition and look forward to sharing this new chapter with you. If you have any questions, feel free to ask during the interview process! Overview The Electrician is responsible for installations, alterations, additions and/or repairs of electrical systems, conductors and associated materials and equipment within the commercial and industrial electrical industry. Responsibilities Specific responsibilities include: Responsible for assigned field installations, alterations, additions, and/or repairs of electrical systems, conductors, and associated materials and equipment. Work within an established time frame and ensure that this work is done in conformance with quality work standards, project man-hours, and in the established company guidelines and within regulatory compliance. This position is Full-Time, Non-Exempt, and reports to the Foreman or Superintendent. Qualifications Required Education, Experience, and Qualifications High School Diploma. 4 or more years of experience. Must be able to report to assigned job site location on time as directed. Knowledge and understanding of OSHA. Clearly understand and comply with company/job safety (OSHA). Must have knowledge of: Properly implement grounding practices Transformer Protection/Connections Insulating Oils & Overcurrent Protection Parallel circuits Fuse Operate Circuit Breakers Motors Inductance and Capacitance Power Switching Procedures Terminations Blueprints/Shop Drawings, including symbol use. Effective verbal and written communication skills. Maintain and properly store tools, equipment, and/or materials. Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment. Ability to multitask and perform duties outside of the scope of work when necessary. Preferred Education, Experience, and Qualifications Electrical Journeymen license. Travel Requirements As required by job assignment. Physical/Work Environment Requirements Ascending and descending ladders, stairs, scaffolding, ramps, and/or poles. Ability to work 10 hours per day, night shift, 40 hours per week and overtime as required with little or on short notice. Job may require working in all elements, depending on job location, time of year, heat, cold, rain, and/or wind. Must be able to utilize provided construction site sanitary facilities. (Porta-Johns). Must wear personnel equipment at all times. (i.e. hard hats, safety glasses, safety harnesses as required) and respirators when needed. Light to heavy work that includes adjusting and/or moving objects up to 50 pounds. Must be capable of digging trenches, either by use of hand tools or equipment. Ability to work in restrictive/tight areas. We are proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

←Back to all jobs at TREO STAFFING LLC Commercial Electricians TREO Staffing is looking for an Electrician for Commercial project in Hammond. Key duties include: Install conduits, wiring, electrical panels and circuits Start up and test installed generator Troubleshoot electrical problems and repairs Communicate with customers regarding the install of the generator and/or transfer switch, as well as warranty information Adhere to all quality and safety codes Local travel will be required Minimum Qualifications: A technical, Associates Degree or certificate in a maintenance related field 3+ years of experience as an electrician PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to manipulate objects, tools or controls and talk or hear. The employee is regularly required to walk; stoop; crouch; bend and reach above shoulders. The employee must frequently lift and/or move up to 80 pounds unassisted and up to 100 pounds with assistance, waist high, up to 10 feet away. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and depth perception. Temperatures can vary from cool to warm depending upon the season.' ' Job Type: Full-time Pay: $20.00 - $30.00 per hour (depends upon Experience) Schedule: Monday to Friday 6:00 - 5:00 Please visit our careers page to see more job opportunities.

MAJOR ACCOUNTABILITIES include the following. Other duties may be assigned. Perform day to day assignments via work orders and/or instructions from Foreman to ensure timely and accurate completion. Monitor, repair and install all electrical equipment in accordance with industry guidelines, local and national codes. Perform troubleshooting, corrective maintenance, and preventative maintenance on electrical systems to ensure the proper operation and extended operating life of such systems. Interface all electrical equipment repairs in harmony with other internal functional departments as required minimizing disruption and maximizing effectiveness. Comply with established inventory, equipment distribution, equipment operation and maintenance procedures to ensure the efficient, effective and safe operation of the department. Possess strong knowledge of hand tool, diagnostic equipment and power tool use. Notify Foreman of any equipment requiring repair or replacement to ensure a safe and effective workplace. Assist vendors and contractors as required in completing their contractual obligations in accordance with established guidelines and procedures. Adhere to the policies regarding MCCNO and departmental procedures. Other Skills and Abilities Must demonstrate technical expertise in the electrical field as prescribed by city, state and national codes.

Licensed electrician capable of doing both construction and maintenance electrical work. Responsible for the installation, repair and maintenance of electrical equipment and fixtures. This is an Essential Personnel position, which can require that the incumbent must report for duty and work through emergencies, and also can be designated by the supervisor as essential for the accomplishment of work, or for the completion of a critical task. * Must be capable of receiving oral, written and diagrammed instructions regarding plumbing installations, troubleshooting and maintenance based on current codes. * Able to handle multiple projects * Ability to utilize TMA Facilities maintenance software on portable devices (e.g. iPod) * Ability and willingness to work evenings, weekends, and possibly holidays * Ability to be on call * High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. * Five (5) years' experience in electrical trade * Must hold a Journeyman's electrical license * Must have a valid and unrestricted (not including corrective lens needs) U.S. Driver's license and must meet the Tulane University Motor Vehicle policy criteria to become authorized as a driver

About the Role We are seeking an experienced and dependable Electrician to join our maintenance team. The ideal candidate will be responsible for installing, maintaining, and repairing electrical systems and equipment in accordance with applicable codes and safety standards. This position plays a key role in ensuring facility operations run safely, efficiently, and reliably. Key Responsibilities Install, inspect, maintain, and repair electrical wiring, lighting, fixtures, panels, and related equipment. Diagnose and troubleshoot electrical issues using proper testing tools and techniques. Perform preventive maintenance and inspections to minimize downtime and maintain safety. Read and interpret blueprints, schematics, and technical diagrams to complete installation and repair work accurately. Ensure all electrical work complies with the National Electrical Code (NEC) and local regulations. Collaborate with maintenance and construction teams on renovations and facility upgrades. Maintain accurate documentation of work performed and materials used. Follow OSHA safety protocols and company safety procedures at all times. Qualifications High school diploma or equivalent required; completion of an electrical apprenticeship or trade certification preferred. Minimum of 3 years of electrical experience in commercial, industrial, or facility maintenance settings. Strong understanding of electrical systems, components, and safety codes. Proficiency with electrical testing tools, hand tools, and power equipment. Ability to lift up to 50 lbs, climb ladders, and work in confined spaces or at heights. Valid driver's license required; journeyman or master electrician license preferred. Preferred Skills Experience with generators, control panels, or low-voltage systems. Knowledge of building automation and energy management systems. Basic familiarity with related trades (HVAC, plumbing, or carpentry). Strong problem-solving and teamwork skills. Location: - Statewide, Louisiana (Various Parishes) - Iberville, St. Helena, East Feliciana, West Feliciana, East Baton Rouge, West Baton Rouge, Livingston, Pointe Coupee, St. John, St. James, Assumption, Lafourche, Terrebonne, St. Charles, Evangeline, St. Landry, Acadia, St. Martin, Lafayette, Iberia, St. Mary, Vermillion, Beauregard, Allen, Calcasieu, Jefferson Davis, Cameron, Winn, LaSalle, Grant, Catahoula, Concordia, Rapides, Avoyelles, Vernon, Caddo, Bossier, Webster, Claiborne, Lincoln, Natchitoches, Sabine, Red River, Bienville, De Soto, Union, Morehouse, West Carroll, East Carroll, Ouachita, Madison, Caldwell, Franklin, Tensas, Richland, Jackson. View all jobs at this company

Job Description CDR General Services is seeking skilled Electricians in Jean Lafitte, LA for a hands-on role focused on conduit bending and general electrical work. The ideal candidates will be safety-conscious, detail-oriented, and experienced in reading electrical schematics and completing installations in a team environment. Work schedule is Monday-Friday, 8-hour days, may transition to 6x8s depending on project needs. Responsibilities Bend and install conduit according to project specifications and safety standards Read and interpret electrical schematics and wiring diagrams Perform general electrical installation, maintenance, and repair tasks Operate man-lifts and other equipment safely (man-lift certification is a plus) Collaborate with team members to complete projects efficiently and safely Requirements Strong experience with conduit bending (primary skill required) Proficient in reading electrical schematics and blueprints Ability to work safely at heights and operate lifts Experience operating scissor lift Strong work ethic, attention to detail, and commitment to safety

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! TEST OPERATIONS ELECTRICAL TECHNICIAN I/II Based out of Rocket Lab's Test Facility at Stennis Space Center in Mississippi, the Test Operations Electrical Technician is responsible for helping build and operate critical test facilities to support the Archimedes rocket engine and the Neutron launch vehicle. You will become skilled in Test Operations roles and be expected to work in collaboration with a team of other technicians and engineers in support of the overall test facility design, build, activation and engine test efforts. Please note: We are currently hiring for the following shifts: B Shift (Monday - Thursday, 3PM to 1:30AM) and C Shift (Thursday - Sunday, 5AM to 3:30PM). This position can be hired at the Technician I or Technician II levels. WHAT YOU'LL GET TO DO: Install, maintain, and repair electrical components, systems, machinery and control panels including cable trays, panel building, and pipe bending. Troubleshoot, identify, and resolve electrical issues using appropriate testing devices and techniques to minimize downtime and ensure operation efficiency. Ensure all electrical systems comply with local, state, and national electrical codes and safety regulations. Collaborate as part of a team or independently to complete projects, often collaborating with engineers and other technical staff. Document, read, and interpret technical diagrams, blueprints, and schematics to understand electrical systems and components. Be personally responsible for your safety and for those around you Work hands on with check out, calibration and functional testing of instrumentation and control systems for high pressure and cryogenic fluid systems involving valves, regulators, flow meters and other plumbing elements Help to stand up a test facility control room Maintain situational awareness and constant communication with others involved in the test activity Both lead and be part of a team of technicians and engineers who set up and operate the test facility YOU'LL BRING THESE QUALIFICATIONS AS A LEVEL I TECHNICIAN 2+years demonstrated experience in test operations or in designing, building and activating test facilities. Familiarity with various Programmable Logic Controller platforms Knowledge of processes for electrical and data systems in regulated environment Demonstrated experience with facility wiring and electrical installation Understanding of instrumentation typical for rocket engine testing, including flow meters, thermocouples, accelerometers, etc. General knowledge of distributed I/O systems including POe cameras, communication platforms, etc. YOU'LL BRING THESE QUALIFICATIONS AS A LEVEL II TECHNICIAN 5+years demonstrated experience in test operations or in designing, building and activating test facilities. Familiarity with various Programmable Logic Controller platforms Knowledge of processes for electrical and data systems in regulated environment Demonstrated experience with facility wiring and electrical installation Understanding of instrumentation typical for rocket engine testing, including flow meters, thermocouples, accelerometers, etc. General knowledge of distributed I/O systems including POe cameras, communication platforms, etc. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Electrical journeymen license or related vocational education Additional experience operating and/or building large industrial complexes Post-secondary education that might include technical degrees or licenses (A&P or similar) Experience with rocket engines or launch vehicles or similar aerospace hardware Experience operating facilities for liquid oxygen and liquid methane Demonstrated ability to be assertive in a fast-paced operations environment and stand up for what you know is right Ability to trouble shoot systems and collaborate to develop corrective work instructions Basic computer skills in MS Office, email, collaborative networks like JIRA or CONFLUENCE ADDITIONAL REQUIREMENTS: Must be able to walk and stand for long periods of time Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents Must be able to lift up to 25lbs. unassisted. Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

The Electrician position is responsible for conducting maintenance and repairs of instrumentation, automation, electrical and related systems. This position reports to the Electrical Foreman. This position resides at the St. Rose Terminal, but is also responsible for duties at the Avondale terminal. Responsibilities Electrical maintenance and repairs New electrical construction Perform work orders Troubleshoot instrumentation, automation and electrical issues Education and Experience High School Diploma or equivalent Ability to learn and adapt in a growing and changing environment Working knowledge of both high and low voltage systems as well as basic knowledge of instrumentation and automation Terminal maintenance experience Instrumentation and automation skills Knowledge of pump motors, VFD's, actuators and radars, transformers and control valve Ability to read and program logic in PLC's Valid Driver's License TWIC (Transportation Workers Identification Credentials) for access to IMTT's terminal locations. Skills and Abilities Clear and concise written and verbal communication skills in the English language. Ability to understand written and verbal communication in the English language. Ability to work independently and effectively in a team environment Ability to work closely with others with a positive attitude and a willingness to help others. Ability to represent IMTT in a professional and positive manner. Ability to manage numerous projects in a frequently changing work environment Compliance with all Company policies and procedures. Ability to interact with vendors, service providers, and employees in a professional and courteous manner. Good organizational skills and attention to detail. Supervisory and management skills. Effective in Microsoft Office software (Word, Outlook, Excel, etc) Hours of Work Typical hours of operation are Monday through Friday 7:00 am to 3:30 pm. This position requires overtime and occasional weekend work as job duties demand. Occasional travel may be necessary, sometimes with little or no advance notice. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Because the facility and adjoining facilities handle hazardous materials, the employee must be able to ingress and egress in foreseeable emergencies. The applicant must be able to work safely without presenting a direct threat to self or others. This would require the ability to lift to 25 pounds, bend, stand, or stoop, as necessary. Ability to perform climbing, bending, stooping, kneeling and moderate lifting. Must be able to work in confined spaces, over water and not be afraid of heights. The large scale of the operation and the extensive layout of the facility require that the employee can walk and stand on uneven terrain, to climb stairs and ladders, and traverse inclines: uphill, downhill or mixed. Must be able to work in a confined space, work over water, climb stairs and not be afraid of heights. Must be capable of wearing respirator and/or other PPE during some operations or emergencies. This job description is intended to describe the general nature and level of the work being performed. This is not an exhaustive list of all duties and responsibilities. The company reserves the right to amend and change responsibilities to meet business and organizational needs as necessary with or without notice. IMTT is an equal opportunity employer Minority/Female/Disabled/Veteran and a drug free workplace. We exercise high ethical standards and are committed to complying with all laws in the jurisdiction where we conduct business. Our internal policies and procedures support this commitment. If you like working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

Full-time Description Essential Job Functions: Assemble and wire switchgear and controls. Assemble and wire low voltage systems. Perform precise wiring tasks, ensuring all connections are secure and meet safety standards. Follow technical drawings to wire systems according to specifications. Perform daily tasks with safe and proper use of equipment and hand tools. Calculate and measure accurately using proper measurements and requirements and mathematical terminology Maintain a safe, clean and well-organized work area by complying with safety procedures, rules, quality standards and best practices, and relying on pre-established guidelines or directions from senior team members to perform tasks optimally. Competencies: Excellent organizational skills. Attention to detail. Excellent mathematical skills. Must be able to read and work from AC and DC schematics. Must be competent using basic hand and power tools. Must be able to read a measuring tape. High level of precision in wiring tasks to ensure safety and functionality. Requirements Educational & Experience Requirements: High school diploma or equivalent required. Trade school training preferred. Industry exposure or experience preferred, but not required. Physical Requirements: Ability to lift to 50 LBS. Dexterity and good hand-eye coordination, with the ability to manipulate and assemble very large and extremely small components. Physical stamina to stand for long periods of time and perform repetitive tasks, such as climbing ladders and bending often.

NO STAFFING AGENCIES **TECHCRANE INTERNATIONAL. LLC IS DIRECT HIRE ONLY Essential Functions • Interprets technical drawings to determine the layout of electrical systems. • Diagnoses and troubleshoots faulty wiring. • Runs tests on generators and other backup systems. • Checks for and deploy upgrades of electrical components. • Documents problems and prepares reports. • Facilitates order of needed electrical components. • Read and interpret electrical blueprints. • Use a variety of tools and techniques to repair and maintain electrical systems. • Use your knowledge to determine the best way to install new electrical systems. • Answer any questions that our customers may have about their electrical systems and components. • Ensure that you follow all safety requirements and OSHA guidelines while you work. Qualifications • High school diploma or equivalent • Valid driver's license • Formal electrician training • Ability to use a wide variety of electrician tools and techniques. • Ability to interpret electrical blueprints and schematics. • Relevant hands-on experience preferred. • Electrician license or certification • In-depth knowledge of electrical principles, construction, wiring schematics • Deep understanding of the National Electrical Code (NEC) and other safety standards • Strong analytical and organizational skills • Excellent verbal and written communication skills • Five years experience in electrical field Physical and Mental Demands • Use their hands to handle, control, or feel objects, tools, or controls. • Stand for long periods of time. • Repeat the same movements. • Walk or run for long periods of time. • Climb ladders, scaffolds, or poles. • Keep or regain their balance. • Kneel, stoop, crouch, or crawl. • Focus on one source of sound and ignore others. Work Environment • Continual walking, standing, climbing, stooping, bending, kneeling, reaching, and heavy lifting and carrying. Work in tiring and uncomfortable positions, around electrical power lines, outside and inside. • Exposure to extreme temperatures. • Frequent district-wide travel.

TWO CURRENT VACANCIES. Under general supervision, performs skilled electrical maintenance and repair work in the maintenance of facilities and related equipment and systems for the Public Works Department. Work involves installing, maintaining, and repairing electrical fixtures, wiring, and lighting for all City buildings, gardens, signage, and outdoor venues managed by the Public Works Department. Team led by Electrician III. Reports to the Chief Electrician.ESSENTIAL JOB FUNCTIONS Performs electrical building and grounds maintenance such as installing new fixtures; replacing bulbs and ballasts; replacing outlets; resetting breakers; checking air conditioning, etc. Troubleshoots and repairs lighting and electrical systems for various buildings, gardens, signage, and outdoor venues. Installs new electrical circuits. Performs construction site work including demolishing and remodeling electrical sites, installing electrical pipes, etc. Delivers, installs, disconnects, and removes temporary services and extension cords for public events. Assists Electrician II and Electrician III in the maintenance, installation, and repair of generators. Maintains shop and truck inventory, assists in ordering supplies, stocks shelves, pulls materials for jobs, etc. Provides assistance with special events such as setting up and cleaning up events, building specialized equipment for events, monitoring operations, etc. Uses a variety of tools such as hand tools, power tools, test equipment, ladders, etc.; and a variety of supplies such as junction boxes and covers, duplex receptacles, switches, light bulbs, electrical panels, general office supplies, etc. Receives and/or reviews various records and reports such as work orders, verbal instructions, and e-mail. Prepares and/or processes various records and reports such as daily log, work orders, work order requests, and supply requests. Refers to wiring schematics, technical drawings, National Electric Code, Manual on Uniform Traffic Control Devices, National Electrical Manufacturers Association, policy and procedure manuals, computer manuals, codes / laws / regulations, publications and reference texts, etc. Operates a variety of vehicles, equipment, and machinery such as pickup truck. Performs basic maintenance and inspection on assigned vehicles. Performs after hour call outs. Interacts and communicates with various groups and individuals such as coworkers, Electrician II and III, Chief Electrician, Public Works and City staff, and the general public. ADDITIONAL JOB FUNCTIONS Performs related duties as required. Essential duty status position, will be required to report to work during emergency situations, including, but not limited to, city-wide declared emergencies. MINIMUM TRAINING AND EXPERIENCE Requires a high school diploma, GED, HiSet, or equivalent certification of competency and successful completion of an apprentice or equivalent training program in the electrical field supplemented by one or more years of electrical maintenance and repair experience, or an equivalent combination of education, training, and experience that provides the required knowledge, skills, and abilities. Must possess a valid Louisiana Class D driver's license. The City of Kenner is an Equal Opportunity Employer - The Kenner Civil Service Department posts current examination announcements on its online application website. Job applications may be filed only when an examination is announced. It is important that you include your entire employment history including periods of unemployment on your application, plus any relevant education and experience. Applications may be rejected if incomplete. Some job postings have an application deadline; others are open on a continuous basis until a sufficient number of applications have been received. Applicants who are interested in jobs that are not currently open for application may complete a job interest card which may be filed with the Kenner Civil Service Office at any time. DELAY IN THE MAIL: The Kenner Civil Service Department cannot accept responsibility for failure of the applicant to receive an admission slip to an examination, or for failure of the Department to receive material mailed by the applicant. VETERANS PREFERENCE in examinations will be granted only to those persons who provide proof of military service during covered periods and who are found to be eligible. The Kenner Civil Service Department does not discriminate on the basis of disability in the admission or access to, or treatment or employment in its programs or activities. Therefore, reasonable accommodations will be provided to allow access to the Department's programs and activities for individuals with disabilities unless such accommodations would result in undue hardship. Auxiliary Aids such as readers are provided for individuals requesting such accommodations under provisions of the Americans with Disabilities Act. >>>> An attached resume will not replace a completed application. <<<< REVIEW YOUR APPLICATION TO MAKE SURE IT IS CURRENT. Failure to provide your qualifying work experience may result in your application not being considered. DISCLAIMER: This is not an employment agreement or contract. Management has the exclusive right to alter this job description at any time without notice.

The Electrician role collaborates closely with our electrical installation teams, ensuring that all company policies and procedures are upheld to the highest standards. This role involves managing daily electrical tasks according to specific job requirements and following the guidance of the electrical team lead. It's essential for the electrician to effectively execute all project duties in line with company standards, adhering to established operating procedures. Requirements Knowledge of electrical codes and best practices Print reading, design and electrical layout Install equipment, install conduit and fittings, pull wire, terminate Test and record wiring for insulation resistance and IV curve tracing as needed Configure basic electrical devices Ensure accurate electrical take-off and procurement Maintain company vehicle and vehicle stock Ensure code compliance and clean work and jobsite Meet technical requirements of equipment and site conditions Troubleshoot and repair malfunctioning equipment and systems Effectively execute installation work, customer interaction, and safety guidelines Role models the Solar Alternatives organizational culture daily. Qualifications 3+ Years Journeyman Electrician Familiarity with construction and electrical work terminology Self-driven work ethic and good time management Ability to use online scheduling and communication tools Clean driving record and valid license Verifiable job references Comprehensive familiarity of 2014 and 2017 NEC 40-50+ hours per week, 5-6 days per week Preferred but not required: Power generation experience OSHA Certification (10 or 30 hour) Associates or greater college education NABCEP or equivalent certification Physical Demands & Work Environment: Ability to work unsupervised and occasionally lift up to 50 pounds. Regularly required to stand, walk, sit, and use hands/fingers. Ability to travel as required. Work performed in office, or customer installation locations. Benefits COMPENSATION and BENEFITS: Salary starts at $25-35/hr based on qualifications, plus opportunities for sales bonuses. Benefits include majority-paid medical, dental, vision and matching 401K program. Earned paid time off starts at two weeks annually.

Job DescriptionDescription: Help electricians by performing duties include using, supplying or holding materials or tools, and cleaning work area and equipment. They also measure, cut, and bend wire and conduit, using measuring instruments and hand tools. Requirements: Must be able to measure, cut, and bend wire and conduit, using measuring instruments and hand tools.

←Back to all jobs at TREO STAFFING LLC Commercial Electricians TREO Staffing is looking for a Non-Licensed Electrician for residential homes. Key duties include: Install conduits, wiring, electrical panels and circuits Start up and test installed generator Troubleshoot electrical problems and repairs Communicate with customers regarding the install of the generator and/or transfer switch, as well as warranty information Adhere to all quality and safety codes Local travel will be required Minimum Qualifications: A technical, Associates Degree or certificate in a maintenance related field 3+ years of experience as an electrician PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to manipulate objects, tools or controls and talk or hear. The employee is regularly required to walk; stoop; crouch; bend and reach above shoulders. The employee must frequently lift and/or move up to 80 pounds unassisted and up to 100 pounds with assistance, waist high, up to 10 feet away. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and depth perception. Temperatures can vary from cool to warm depending upon the season.' ' Job Type: Full-time Pay: $20.00 - $30.00 per hour (depends upon Experience) Schedule: Monday to Friday Weekend availability Education: High school or equivalent (Preferred) Please visit our careers page to see more job opportunities.

Install Electrical and Electronic Control Systems and equipment, PLC's, MCC's, Lighting, Power supplies, Fire and Gas, and communications systems with minimal supervision. Basic troubleshooting and diagnostic skills of Electrical/Electronic issues relative to Control Systems and equipment. Install and maintain Lighting and Power distribution systems. Route, fabricate and install cable tray. Route, bend and install conduit runs. Gland and terminate cables. Hook up generators, transformers, MCC's (Motor Control Center) Nav-Aids etc Demolition of cable and conduit runs Proficient in the use of tools of the trade Read drawings and P&ID's Knowledge of industry standards, National Electrical Code and relevant Government regulations Recognize and avoid safety hazards and dangers All above functions performed with minimal supervision

CDR General Services is seeking skilled Electricians in Jean Lafitte, LA for a hands-on role focused on conduit bending and general electrical work. The ideal candidates will be safety-conscious, detail-oriented, and experienced in reading electrical schematics and completing installations in a team environment. Work schedule is Monday-Friday, 8-hour days, may transition to 6x8s depending on project needs. Responsibilities Bend and install conduit according to project specifications and safety standards Read and interpret electrical schematics and wiring diagrams Perform general electrical installation, maintenance, and repair tasks Operate man-lifts and other equipment safely (man-lift certification is a plus) Collaborate with team members to complete projects efficiently and safely Requirements Strong experience with conduit bending (primary skill required) Proficient in reading electrical schematics and blueprints Ability to work safely at heights and operate lifts Experience operating scissor lift Strong work ethic, attention to detail, and commitment to safety