Electrical apprentice jobs in Sioux City, IA

We are looking for a Master Electrician or a Journeyman. We do commercial lighting and signage. We work on the road and pay all travel time and per diem install lighting and signage. *Qualifications and Skills* Master Electrician license of a journeyman's. *Benefits* Medical Insurance Simple IRA HSA Per Diem All Hotels Paid Job Type: Full-time Pay: $30.00 - $60.00 per hour Benefits: * 401(k) * Health insurance * Health savings account * Paid time off * Retirement plan People with a criminal record are encouraged to apply Work Location: On the road

Electrician I: Under direct supervision, applies knowledge, skills and abilities at the journey level to install and repair electrical systems and equipment (generally less than 600V) including control systems. The full job description covers all associated skills, previous experience, and any qualifications that applicants are expected to have. Electrician II: Under general supervision, applies knowledge, skills and abilities at the journey level to install and repair electrical systems and equipment (generally less than 600V). Demonstrates Journeyman Electrician qualifications, training, experience and technical knowledge. Responsible for the coordination and accomplishment of maintenance, operations and modifications. Performs the duties characteristic to, and normally required in, the trade of electrician, following recognized procedures and techniques for such work. Utilizes special tools, equipment, and processes (such as insulation testers, thermal imaging cameras and Thermal/Infrared (TIR) Predictive Testing procedures) to collect, perform initial diagnostics, and respond to data through established guidelines for preventive and predictive maintenance to ensure equipment reliability. Electrician III: Demonstrates Master Electrician qualifications, training, experience, and technical knowledge to properly plan, lay-out, and supervise the installation of electrical wiring, apparatus and equipment for light, heat, power and other purposes. xevrcyc Utilizes special equipment, tools and processes (such as power quality analyzers, insulation testers, thermal imaging cameras and Thermal/Infrared (TIR) Predictive Testing procedures) to collect, perform advanced diagnostics, analyze, and respond to data collected through established guidelines and procedures for preventive and predictive maintenance to ensure system reliability and system optimization.

MMR Constructors, Inc. is accepting resumes for Iowa Licensed Journeyman Electricians (AND RECIPROCATING STATE LICENSES) for a project in Cedar Rapids, Iowa. Company Culture: At MMR, our most valuable assets are not our buildings or equipment, it is our family of employees with diverse backgrounds and experiences. Our investment in training programs and resources allows our employees to reach both their personal and professional goals. This is evident with MMR receiving numerous awards including “Best Place to Work” and consistently being recognized as one of the top Engineering News Record's “Annual Specialty Contractors.” All of which can be further explained on our website (***************************** by watching the provided videos. Organization Description: MMR has served as the industry leader in instrumentation and electrical construction, maintenance, and technical services for over 30 years. Our diverse list of clients allows us the unique ability to work across industry lines in the oil and gas upstream and midstream as well as chemical and petrochemical downstream, industrial manufacturing, power generation, renewable energy, mission critical, heavy commercial, and energy storage sectors. MMR holds the proud distinction of being the largest privately owned “Open Shop” contractor in the United States with over 30 branch offices including global locations in Canada and South America. For more information, please visit our website: *************** Job Duration: 2 years Job Schedule: 60 hours/week (6/10's; Monday - Saturday) Rate/per diem: Licensed Journeyman - $45.00/hr; $100.00/day per diem (paid on 7 days if full week schedule worked) Must meet per diem mileage requirement Duties/Responsibilities of Licensed Electrician (including but not limited to): Interpret blueprints and follow manufacturers' specifications Participate in the construction installation, modification, maintenance and repair of electrical systems and components (lighting, wiring, transformers, outlets, circuit breakers, etc.) Study wiring diagrams and manuals to determine correct installation and quality Electrical testing and calibration Measures, cuts, bends, threads, assembles and installs electrical conduit/cable tray Pulls wiring through conduit or lays cable in cable tray Connects wring to switch gears, junction boxes, lighting fixtures and equipment Installs control and distribution apparatus such as switches, relays and circuit-breaker panels Connects power cables to equipment, such as electric range or motor and installs grounding leads Tests continuity of circuit to ensure electrical compatibility and safety of components with testing instruments such as ohmmeter, battery and buzzer, hot stick, multi meter and/or oscilloscope Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement Repairs faulty equipment or systems using rulers, hand tools, hack saws, pipe threaders, conduit benders, ladders, etc. Maintains tools and equipment and keeps supplies and parts Disassembles defective electrical equipment such as motors, switch gears and circuit breakers Loads transports and unloads materials, tools, equipment and supplies Assists in lifting, positioning and fastening objects such as wiring, conduit cable trays and motors Clerical/administrative duties related to task or project documentation Attend safety training as directed Must comply with all safety and company rules and regulations Employee must be able to travel to and from the jobsite via personal vehicle or other public form of transportation MMR offers a competitive benefits package including health, dental, vision, 401(k), 401(k) matching and numerous other voluntary benefits. MMR Group, Inc. and its affiliated companies ("MMR") is an Equal Opportunity Employer and does not discriminate on the basis of race, color, national origin, religion, sex, age, veteran status, genetic information or any other legally protected class.

Job DescriptionDescription: Snapshot Summary: Novel Energy Construction is looking to hire an Electrical Apprentice in Maine. This is a full-time onsite position, the pay range is $26.98 - $40.00 per hour, and the timeframe is Monday-Friday with extended hours and frequent weekend work. After a 60-day probationary period, employees will be eligible to enroll in benefits and accrue sick and vacation time based on hours worked. We are aiming to fill this role immediately and the required certifications and licensure include enrollment in our company-supported Registered Apprenticeship Program (see Required Education and Experience section for more details). Core Focus Area: The Electrician Apprentice performs a variety of tasks and assists other craft workers in the construction, maintenance, and repair activities on solar PV systems. Requirements: Essential Functions Take direction from crew foreman with the installation of solar projects in the field. Maintains a clean job site, picks up all tools and equipment and secures job site each day to eliminate potential hazards. Shipping, receiving and storing construction or conservation materials and equipment Loads and unloads trucks using appropriate equipment. Delivers materials to construction sites and/or storage facilities. Ensures that proper safety and incident reporting procedures are followed. Brings problems to the attention of the foreman, safety director or HR manager. Acts as a trouble shooter on current projects. Maintain and monitors quality standards. Assures compliance with Company safety policies and OSHA and/or MSHA safety standards. Post-construction site clean-up performed on a timely basis. Other Duties as assigned. Competencies Technical or professional proficiency to be highly competent in their work Problem-solving Putting the team first, working well with others Relationship building and Intrapersonal skills Using Company tools and processes Daily Discipline of time management, learning on the fly, and accepting feedback Delivers results consistently Creates a process for one's own work Creates a process for improving the work and incorporating into existing processes via process mapping Communication skills: Written and verbal communication, Presentation skills, Running meetings, Email, Conflict Management, Building a Business Case, and Listening Requirements Work Environment While performing the duties of this job, the employee is required to frequently be on-site at the project and may be exposed to ongoing construction and various weather conditions. The noise level in the work environment may range from low to moderate. This position is performed in outside weather conditions. Physical Demands The following physical requirements are representative of those necessary to successfully perform the essential functions of this role: Lifting and Carrying: Ability to lift and carry heavy objects weighing up to 50 lbs. Endurance: Capable of standing and walking for extended periods. Physical Labor: Performs strenuous tasks in challenging outdoor or field conditions. Strength and Mobility: Frequently lifts, pushes, pulls, and carries materials using core strength and stability. Agility: Able to jump, sprint, and throw objects as needed. Dexterity and Coordination: Requires strong manual dexterity and coordination across multiple limbs (e.g., hands, arms, both hands together). Quick Movement: Must be able to move arms and legs rapidly and efficiently. Stamina: Maintains high levels of physical endurance throughout the workday. Travel This role will require travel to various project sites. Reliable transportation is a must. Role Type and Hours This is a full-time onsite position, Monday-Friday with the potential for extended hours and frequent weekend work. Compensation $26.98 - $40.00 per hour Benefits 401(k), matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Vision insurance Required Education and Experience High School Diploma or GED A valid Driver's License and a clean driving record Enrollment in our company supported Registered Apprenticeship program where you will complete both on-the-job hours and course work (after hours), which will be monitored. Enrollment in this program is mandatory for this position and the program cost is roughly $695 per year - once the Apprentice completes all courses and passes each module test, Novel will reimburse 50% of the tuition fee. This is a four-year program and once completed you will be able to test for a Journeyman's license. Preferred Education and Experience Associates degree or equivalent in construction technology 1-2 years solar construction experience NABCEP PV Installation Professional certification OSHA 10 certification OSHA 30 certification Fall protection training Forklift operator experience Mobile Elevated Work Platform First aid certified CPR Certified Pallet packaging Competent in customer service and email correspondence Novel Energy Solutions is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status.

Job Description Augusta Plumbing, Heating, Air Conditioning is seeking a full-time Electrical Apprentice who is a motivated individual with a strong work ethic and a passion for learning the Electrical trade. About Us At Augusta Plumbing and Heating, we've been the area's go-to choice for reliable and affordable plumbing and HVAC services since 2007. Beginning the summer of 2025, we have expanded into the electrical trades. With a focus on customer service and high-quality work, we stand out for our commitment to excellence. We make sure every team member has a healthy work-life balance, opportunities to learn, and the right tools for their job. About the Job As an Electrical Apprentice, you will be paired with a Master Electrician who you will assist with installing, troubleshooting and repairs. Your key responsibilities will include: Assisting the Master Electrician in their daily role while learning what it takes to become a technician yourself. Learn about our company service protocols and operating systems efficiently. Cross train with our plumbing and HVAC team as needed. This is a fast-paced role that requires a dedicated, fast learning and hard-working individual. Excellent verbal and communication skills are a must. About You Are you someone who: Thrives in a structured, team-oriented environment with continual learning. Excels at tracking details, ensuring accuracy, and precision. Is fair, honest, organized and takes pride in technical, factual work. Wants to begin an exhilarating career in the electrical field. Is a high energy person who has a positive attitude. Has a safety-first attitude. Requirements include: High School Diploma or equivalent Ability to stand, walk, crawl for an extended period of time with also being able to lift 50lbs regularly and occasionally up to 100lbs. Experience with basic hand tools, ability to read a measuring tape, basic computer skills and basic electrical knowledge. If you're ready to begin your electrical apprentice journey, we want to hear from you. We are offering competitive wages between $20.00 - $30.00 to start, depending on experience. Job Posted by ApplicantPro

Everlight Solar is seeking a hardworking individual to fill the role of Electrical Assistant. We are looking for a dependable individual that is passionate about developing lifelong skills and is seeking an entry-level position into the solar industry. Everlight Solar is a rapidly growing company and the leader of solar energy in the Midwest. We offer a unique experience that fosters individual growth and rewards performance. Our culture at Everlight is extremely important to us. The work environment is fast-paced and dynamic. We value teamwork, quality, innovation, and customer success. Our ideal candidate is self-motivated, detail-oriented, has excellent problem-solving abilities, is passionate about delivering results on-time, exceeding expectations, and ensuring success for our teams. If you want to join an up-and-coming industry with a top-notch company growing rapidly in the space, Everlight Solar is where you should be. Don't miss the opportunity to join the Everlight Solar team! Responsibilities: Assisting with solar panel installations on roof and ground mounted systems Assisting the electrician with wiring, maintaining and troubleshooting residential solar systems Construction experience including roofing and framing is a plus Prior electrical experience is not required. Candidates will be given the potential to earn a sponsored electrician apprenticeship. Qualifications: Excellent customer service skills required (Must have the communication skills necessary to confidently interact with customers, both over the phone and in person.) Thrive in a team environment. Regular, reliable and predictable attendance required. Must be comfortable climbing on roofs from a ladder. Must be comfortable crawling in attics. Must be able to work effectively when alone. Experience with solar power is beneficial, but not required, as it can be learned on the job. Apple/IOS User Benefits: Health Insurance Dental Insurance Vision Insurance Life Insurance Sick and Safe Time Paid Holidays Off PTO Starting salary range: $15-$25/ hour Everlight Solar is proudly an Equal Opportunity Employer. We value diversity of all types and are excited to work with talented individuals from a wide range of backgrounds. Everlight is committed to inclusion and we invite people of any race, creed, color, national origin, ancestry, marital status, sexual orientation, gender identity or expression, disability, nationality or sex, age groups (18+), and levels of education to apply. Authorized to work in the US and background check required.

Job Description We are seeking a motivated individual to join our team as an Electrical Apprentice at Premier Electric in Gretna, NE. As an Electrical Apprentice, you will have the opportunity to learn and grow in a supportive environment under the guidance of experienced electricians. As an Electrical Apprentice, you will assist in installing, repairing, and maintaining electrical systems while following safety guidelines and building codes. You will also learn how to read blueprints, troubleshoot electrical issues, and use various tools and equipment. This hands-on experience will provide you with valuable skills and knowledge that will help you advance in your career as an electrician. The ideal candidate for this position is someone who is eager to learn, hardworking, and detail-oriented. No prior experience is required, as we will provide on-the-job training to help you succeed as an Electrical Apprentice. If you have a strong work ethic and a passion for the electrical industry, we encourage you to apply for this position. As an Electrical Apprentice at Premier Electric, you will have the opportunity to work on a variety of projects, including residential, commercial, and industrial properties. This diversity will allow you to gain a wide range of experience and develop your skills in different areas of the electrical field. In addition to on-the-job training, we offer mentorship programs to help you reach your full potential as an electrical apprentice. Our team of experienced electricians will be there to support you every step of the way and provide guidance and feedback to help you succeed in your role. About Premier Electric Premier Electric is a family-owned and operated electrical contracting company serving the Gretna, NE area. With over 20 years of experience in the industry, we are committed to providing high-quality electrical services to our customers. At Premier Electric, we take pride in our work and strive to exceed our customers' expectations on every project. Our team of skilled electricians is dedicated to delivering superior craftsmanship, exceptional service, and reliable solutions to meet our clients' electrical needs. Whether you are looking for residential, commercial, or industrial electrical services, Premier Electric has the expertise and experience to get the job done right. We value integrity, professionalism, and teamwork, and we are looking for individuals who share our commitment to excellence to join our team as Electrical Apprentices. #hc132123

Company Information A-Lert Construction Services, a division of Centurion Industries, Inc., provides heavy industrial construction, maintenance, fabrication and repair services throughout the U.S. in such diverse processing industries as corn and oilseeds, food, meat, chemical, energy cogeneration and biofuels, wood pulp/paper/fiber products, and more. With over 800 employees and eight offices in six states, A-Lert stands ready to serve the needs of industrial clients throughout the U.S. At A-Lert, we believe our employees are our greatest business asset, and we work hard to help them develop to be their best, to recognize them for their talents, and to provide opportunities to advance their construction career. Job Summary Seeking industrial electrical apprentices in Cedar Rapids, IA. We function in a team environment where all team members are expected to contribute in the areas of Safety, Quality, Productivity and Layout. Our electricians ensure that all electrical work adheres to National Electrical Code (NEC) and company standards. They assist with electrical operational safety and performance testing of equipment prior to being brought on-line. They understand the principles of wiring motors, switches, circuit breakers and fuse boxes operating on AC/DC control systems. They have knowledge in the installation of electrical panel boards, load centers, conduit, conductors, power transformers and safety procedures in working with electrical systems as a requirement. Job Requirements/Qualifications * High school diploma or equivalent * Team Player * Electrical training Other Requirements: * Pre-Employment Drug Screen and Physical * Attendance - Must be available when scheduled for work * Must be able to use time effectively and productively * Must perform quality, accurate, complete, well-organized, concise, analytical and well-articulated work * Must be able to communicate, understand and follow directions Physically must be able to: * Climb and maintain balance on scaffold * See well naturally or with correction * Reach for, handle, and grasp wires and hand tools * Bend, crouch, and work in small places * Lift and carry objects weighing up to 50 pounds Benefits * Comprehensive Group Medical, Rx, Dental & Vision Coverage * 401k Retirement * Paid Life/AD&D * Short Term & Long Term Disability * Paid Time Off * Paid Holidays * Flexible Healthcare & Dependent Care Pre-Tax Spending Plans * Years of Service Awards Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: ************** Email: ************************ Centurion Industries, Inc. bases all of its personnel decisions, including recruiting, hiring, training, and promoting, on the basis of individual qualifications and merit, without unlawful regard to race, creed, color, religion, sex, national origin, age, disability, veteran status, or any other basis prohibited by law. We are an Equal Opportunity Employer. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese If you want to view the Pay Transparency Policy Statement, please click the link: English - Spanish - Chinese To see other positions, click here.

Company is confidential Yellowstone Local is proud to represent an industry leader in residential electrical services. You're a 3rd-4th year Electrical Apprentice with real residential experience under your belt, now it's time to join a crew that actually values your grind and helps you finish strong. What's in it for You? $20-$35/hour depending on experience End-of-year profitability bonuses Full-time, stable work (no temp or project-only gigs) Consistent local routes, home every night Clear path to journeyman licensure No micromanaging, just respect and results Why You'll Love It Here Tight-knit, no-BS team that knows their craft You're treated like a pro, not a number We run lean and pay well-everyone pulls their weight High-trust environment with clients and coworkers Opportunity to grow, lead, and sharpen your skills Your safety and success are our top priorities Your New Role Work on residential electrical systems, including troubleshooting, repairs, remodels, and service upgrades Drive to customer locations within the Plymouth/New Hope, MN area (must live within 10 miles of 55441) Represent the company with professionalism, courtesy, and technical know-how Communicate clearly with clients and team leads Use ServiceTitan (if you've got it) or learn fast, tech that makes your job easier Follow safety guidelines and complete jobs the right way, not the rushed way Location: Plymouth/New Hope, MN (must reside within 10 miles of 55441) Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. Currently registered as an “RE” (Registered Unlicensed Electrician) with MN DOLI 4,000+ verified hours (with 5,000 to 7,000 hours preferred) Minimum 2 years of residential electrical experience Valid driver's license and clean driving record Own transportation to and from jobs Must pass a drug test Has a current DOT medical card or can pass the DOT physical Experience with ServiceTitan software is a plus This company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #orange

Meet the team that brings our projects to life. From logistics to electrical work, everyone in the field plays a critical role in building, powering, and delivering success on a jobsite. Our logistics professionals keep construction moving by ensuring a steady flow of inventory. They bring attention to detail and strong organizational skills as they procure tools and materials for our electricians. Apprentice electricians are the powerhouses behind our most dynamic projects, while summer interns and new graduates kick off their careers as industrial electrical professionals. These team members work closely with our journeyman electricians-seasoned experts who lead and mentor crews while completing complex projects. Our journeyman electricians partner with field foremen and site superintendents, who coordinate work, manage risks, and keep projects on track through planning, motivation, and communication. Our I&E, service, and maintenance teams ensure project performance by installing, testing, troubleshooting, and calibrating equipment. Across roles, we all champion safety-empowering employees to lead as safety shareholders, uphold zero-injury expectations, and care for our crews, company, and families. Apprentice Electrician Responsibilities * Measure, cut, and bend conduit using a tape measure and appropriate power/hand tools * Operate power tools such as drills, saws, pullers, tuggers, etc. * Install conductors in race way and cable tray using manual and power equipment * Assist in lifting, positioning, and fastening objects, such as wiring, conduit, and motors * Perform minor repairs, such as replacing fuses, light sockets, bulbs, and switches * Disassemble defective electrical equipment, such as motors, using appropriate power/hand tools * Load, transport, unload, and furnish Journeyman and Foreman Electricians with materials, equipment, tools, and supplies * Use ladders, scaffolding, scissor and boom lifts * Perform housekeeping duties, as required * Other duties as assigned by field leaders Qualifications Education & Experience: We are looking for candidates interested in becoming licensed through our DOL Electrical Apprenticeship Program. Candidates with a certificate or AS degree in electrical technology, electrical construction, instrumentation or similar or equivalent experience preferred. Location/Travel: This position will require 100% travel to assigned worksites across the United States. Applicants must have reliable transportation and a valid driver's license. Per diem and mileage stipends applicable per company policy. Work Schedule: Start times, break times and work hours vary per site and stage of our projects. Our employees work more than 40 hours per week but no more than 60, as part of our commitment to safety. Due to the type of construction, weekend work maybe required on occasion. Work Environment: While performing the duties of this job, this role is often exposed to high/precarious places, risk of electrical shock, and all outside weather conditions. This role is expected to climb and work at heights and in confined spaces. The noise level in the work environment is usually moderate. Due to the nature of our work and our client base, this role may involve tasks in an environment exposed to dust. Candidates should be comfortable working in these conditions and complying with safety standards to protect their well-being. Benefits of Working at Interstates: * 401(k) Retirement Plan + Company Match * Health, Dental, and Vision Insurance Benefits (Short & Long-Term Disability, Group Life Insurance, and more) * Company Discount Perk Program (Access to discounts with renown brands across the country) * Paid Time Off & Holiday Pay, Flexible Schedule (Support work/life balance) * Bonus Incentives (End of Fiscal Year Incentives and Merit Increases) * Per Diem/Travel Pay or FAVR Program Benefits (as applicable) * Family & safety culture - a team that cares about you as a whole person, not just what you do at work * Company Sponsored Holiday Events, Team Celebrations, and Community Outreach Volunteer Time * Advancement Opportunities unique to our employee's long-term goals * Company Issued Cordless Milwaukee Tool Kit * Continuing Education & Journeyman Licensing Renewal Assistance * Double Pay for Sunday Work, Triple Pay if working an occasional holiday

Kidwell is seeking highly motivated individuals to fill the role of Prefabrication Apprentice II. This position is open to experienced apprentices with experience in residential wiring. The Prefabrication Apprentice II is responsible for supporting the company's prefabrication and kitting initiatives through the creation of assemblies and kits. All work will be performed in the Kidwell Prefabrication Shop (Lincoln) in a temperature-controlled environment. The Prefabrication Apprentice must be team-oriented, have great organizational skills with attention to detail, be honest, positive and possess quality communication skills. Kidwell Core Values At Kidwell, our core values make us who we are and show in everything we do; Led by passion, we believe our everyday jobs contribute to something bigger than ourselves. We pride ourselves in our creativity, but also in the effective solutions we create that bring value to our customers. Our employees act like owners, who take initiatives to lead and are treated like family. We are relentless and see work ethic and accountability as the baseline in the pursuit of excellence. Primary Duties and Responsibilities: * Production of prefabricated assemblies and kits including: * Measuring, cutting and bending of wire and conduit. * Assembling boxes and spooling wire and cable. * Making terminations and joints. * Organization of kits including: * Applying labels to wire bundles or assemblies. * Labeling box assemblies. * Packing boxes with assemblies and plans. * Organizing kits for pickup. * Operation and maintenance of shop equipment including: * Table benders, offset benders, Threaders, drill press, Band saw, chop saw * Operation of fork lift. Delivery of kits to job sites using Kidwell box truck. * Providing prefabrication and kitting to support all Kidwell areas of proficiency including electrical, fire alarm, data cabling, audio visual, access control, security, cameras, nurse call. * Maintaining a clean, organized workspace and production area. * Assisting with material intake and organization. * Collaborating with Staff to clarify or strengthen documentation. * Adherence to all Kidwell standards for quality and safety. * Participation in weekly team meetings and safety trainings. * Other duties as assigned. Job Experience and Requirements: * Candidate must have great organizational skills with attention to detail, be a team player who is honest, positive, and communicates well with others. * A physical exam and drug screening must be passed. * Candidate must be able to pass a physical exam, drug screening, and background check. * Field experience as a commercial electrical apprentice or in manufacturing is preferred but not required. Benefits This position offers a competitive salary with career development potential. We highly encourage and even reimburse certain certifications/trainings. Additionally, we offer health, dental, life, vision, and disability insurance along with paid vacation, parental leave, holidays, sick leave, tool/clothing stipend, and 401k with company match.

We are seeking an Industrial Electrician to join our team in Eagan. Regular Work Schedule: 6:00am-6:00pm 4 days on/4 days off rotating schedule Training Schedule: 6:00am-2:00pm Monday-Friday for at least 3 weeks Starting Pay: $55.36/hour (increases to $56.86/hour effective 12/1/25) Signing Bonus: $15,000 (paid in two installments: 30 days from hire & 6 months from hire) Additional Perks: weekly paychecks, bonus potential, generous healthcare benefits, matching 401k, PTO, paid breaks, tuition reimbursement, and gym reimbursement. Job Responsibilities: Update and maintain equipment documentation within the CMMS Troubleshoot and repair electrical problems arising in buildings, motors, and machine hook-ups, giving priority to production operations that are down Check sketches, blueprints, layout diagrams, or work orders, and prepare lists of materials needed for project work, ensuring compliance with electrical codes Maintain and update equipment records, schematics, blueprints, and files in an orderly fashion Complete all work in accordance with OSHA and NEC standards and regulations Work closely with Production Managers Work to determine the correct method and sequence of operation, and the selection of materials to be used Replace, repair, or adjust defective or worn electrical system components Repair control systems or other equipment as necessary Promote cleanliness, good order, and neat conditions in the maintenance shop, in the storage of parts and supplies, work area, and around plant premises in general Instruct plant personnel on the repair and calibration of process instrumentation Coordinate and communicate equipment and operation problems with production and engineering Active commitment to all Environmental, Health and Safety (EH&S) regulations Other duties as assigned by management Minimum Requirements: High School Diploma or GED from accredited school Currently valid MN Class A Electrical Journeyworker License OR MN Class A Master Electrician license Previous work experience with high voltage as well as single phase, three phase, and DC motors Previous work experience with industrial maintenance and industrial manufacturing plant environments Additional Requirements: Ability to pass pre-employment tests including background check, drug screen, and physical Ability and willingness to wear full-mask respirator directly against skin (eg clean shaven if applicable) with or without reasonable accommodation Ability and willingness to wear full Personal Protective Equipment (PPE) in designated areas (respirator, hard hat, safety glasses, gloves, boots, and hearing protection) with or without reasonable accommodation Ability and willingness to work in a hot production area in full PPE with or without reasonable accommodation Ability and willingness to move about the plant, including stairs and ladders with or without reasonable accommodation Ability and willingness to lift and/or carry up to 80 pounds with or without reasonable accommodation Gopher Resource is an Equal Opportunity Employer.

About Us We are a full-service electrical contractor offering commercial, industrial, residential, voice/data cabling, traffic signalization, and underground installations. We have extensive experience in both commercial and industrial electrical contracting, as well as installation and support for residential homes and buildings. Job Summary Job Title: Electrical BIM Manager Reports to: VP of Operations Location: Des Moines, IA FLSA Status: Full-Time / Exempt Since 1946 Baker Electric has served the electrical needs of Des Moines and Central Iowa. We perform all types of electrical work including commercial, industrial, residential, voice/data cabling, traffic signalization and underground installations. We continue to strive towards excellence by employing individuals with the intelligence, talent, and skills required to contribute to our growth and success and by focusing on employees' individual performance and unification with the team! All successful employees are focused on customer satisfaction and dedicated to meeting our vision of an inclusive and unified workforce. Position Description. The Electrical BIM Manager is a critical role within Baker Electric, Inc., a subsidiary of publicly traded EMCOR Group, Inc., and is located in Des Moines, IA. The position will be responsible for overseeing all BIM projects and deadlines, for developing and maintaining department standards, for managing a team of employees in various positions. This individual must have the ability to communicate with 3 rd parties, trade partners and field personnel, and to offer technical solutions to field issues in a timely manner, as well as the ability to represent the company to outside groups in various functions, such as recruiting events, promotional events, etc. Essential Duties/Responsibilities Plans, coordinates, and directs facilitation between various stakeholders (PMs, customers, trade partners) to ensure BIM projects are moving in the correct direction, meeting the customers' expectations, and any potential issues are addressed timely and prior to construction phases. Provides expert and technical advice on targeted projects and project start-up meetings. Mentors and supports a team of BIM drafters/detailers through various stages of projects, assigning work as appropriate to their level of skill and to foster continued growth, as well as general overall support. Ensures the work of the team, including accuracy of modeling matches submittals, conduit type matches specifications, compliance with codes, and overall adherence to project specifications. Develops and maintains BIM standards, directly or indirectly, including modeling, coordination, annotation, prefab, deliverable and template creation, for the team and the company. Enforces consistency and quality of work following the established standards. Stays up-to-date on emerging technologies and design tools, maintains knowledge on opportunities for integrating storage and sharing processes, and looks for opportunities for greater efficiencies and workflows. Escalates critical and/or sensitive issues to the Division Manager / Executive Team with recommendations for resolution. Complies with all Company operating policies, procedures, and safety programs as established. Performs additional assignments as required by the needs of the company or as directed by executives QUALIFICATIONS. To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Preferred Education and Experience (Knowledge) Minimum 5 years' modeling or drafting, or related, experience in the electrical industry Proven leadership experience over a team or department, either in a supervisory or manager capacity High School diploma or GED required; preferred higher education in related field Knowledge of the construction industry and contract documentation Working knowledge of federal, state, and city regulations and guidelines Required Attributes and Competencies (Skills) Must be able to work directly with customers on all levels to manage customer expectations and drive issues to resolution by ensuring top customer service and a timely response Proficient with Microsoft Office applications, including Outlook and Excel formulas and formatting Familiarity with Windows based operating systems and web based applications, including ERP systems or other construction/financial software packages Familiarity with AutoCAD, Revit, Autodesk Construction Cloud and Navisworks and other electrical, technical, or construction programs Must demonstrate integrity, honesty, professionalism and a commitment to company values Must have ability to build positive working relationships with multiple levels of employees, management, suppliers, and customers Must have excellent organizational, communication, strategic, technical, analytical, problem solving, and multi-tasking skills Must demonstrate ability to effectively organize and manage multiple projects and to meet frequent deadlines Must have high standards of quality with attention to detail Must possess excellent written and verbal communications skills, effectively in the English language Physical Requirements (Ability) The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, see, talk, and hear. The employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is regularly required to walk, reach with hands and arms, climb or balance and stoop, kneel, crouch, or crawl. The employee may occasionally lift and/or move up to twenty-five (25) pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. The employee may be required to commute to field locations and project sites and be able to navigate around the job site locations. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee should expect to sit for long periods in front of a computer and also travel to field locations as needed. While visiting field locations, the employee may be required to be outdoors, exposed to outside weather conditions, extended exposure to sunlight, moisture, cold and heat. The noise level in the work environment is usually moderate to loud. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled #baker #LI-Onsite #LI-KG1 Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Job Details Performance Pet Products - Mitchell, SD Full Time Certificate $30.00 - $40.00 Hourly None 1st (Day Shift) MaintenanceDescription *Spanish Translation Available Below / Traducción al Español Disponible Más Abajo* Farmers Union Industries, LLC, also known as FUI, is a leading agricultural-based manufacturing company headquartered in Redwood Falls, MN. Our current operations include Central Bi-Products, Northland Choice, Midwest Grease, Artex Manufacturing, Redwood Farms Meat Processors, and Performance Pet Products. Please visit our website at fuillc.com to learn more! Performance Pet, located in Mitchell, SD, works with brands both large and small to create an assortment of canned dog and cat foods. Learn more about what we do at fuillc.com/performance-pet-products/. We are currently accepting applications for Electrical & Controls Technician. We offer a starting base wage up to $40/Hr. (based on experience) along with a benefits package that includes health, dental, vision, PTO, paid holidays, an impressive 401K match, and much more! Schedule 1st Shift: Monday-Thursday, 6:00am-4:30pm Additional hours may be possible on a required or voluntary basis during the week or weekend Areas of Accountability All areas of accountability to be delivered with GRIT - our values of Generosity, Relationships, Integrity, and Teamwork Install, inspect, repair, and replace electrical systems and automation equipment Essential Duties and Responsibilities Install, maintain, and repair electrical control, wiring, and lighting systems Install and configure SCADA hardware and software, RTUs, PLCs, and communication networks for production equipment Monitor SCADA systems to ensure uptime, performance, and data accuracy Inspect transformers, circuit breakers, and other electrical components Troubleshoot electrical, control systems, equipment sensors, and automation issues using appropriate testing devices Repair and replace equipment, electrical wiring, and fixtures Follow National Electrical Code, state, and local building regulations Read and understand technical diagrams and schematics Perform corrective maintenance on all plant electrical equipment Understand basic HVAC systems and well as various testing equipment Communicate any accidents, threats, downtime, or cost-saving measures to Complex Manager Accurately complete work orders to document materials used and time spent on maintenance projects Communicate with Parts & Inventory Clerk on equipment and/or parts procurement, when needed Assist other maintenance or production personnel as needed or requested Work safely following all company safety policies, practices, procedures, and improvement initiatives Comply with all regulatory compliance requirements regarding environmental, and food/feed safety Maintain regular and predictable on-site attendance Situations may arise that require employees to temporarily or permanently assume responsibility for tasks not specifically outlined in this . Employees may be requested to work additional hours and/or accommodate a heavier than normal workload. Qualifications 5 years' experience working as an electrician or technician; manufacturing experience, a plus Electrician degree or completion of an Electrical Apprenticeship Program, preferred Experience with SCADA or PLC Programming Advanced understanding of electrical systems, control wiring, safety systems, blueprints, and maintenance and repairs Ability to solve problems independently or use various resources as needed Awareness of the importance of food safety standards while performing equipment maintenance Knowledge of safety procedures such as confined space entry, line opening, fall protection, lockout tagout, and hot work Effectively communicate with supervisors and co-workers and follow written and/or verbal instructions Accurately read and understand signs, labels, warnings, directions, operator manuals, service manuals, and wiring schematics associated with the maintenance and/or operation of instruments, equipment, and/or chemical usage Proficient in basic math skills, measuring, and reading data trends; accurately and legibly record information Understand and operate basic computer systems; Redzone experience, a plus Willingness and ability to work extra hours during the week or weekend and perform work not specifically stated in job description Ability to perform safety sensitive position Ability to work in a facility that processes multiple proteins including beef, pork, chicken, turkey, fish, lamb, rabbit, kangaroo, and egg Must be 18 years of age or older for insurance purposes Physical Requirements Consistently push and/or pull heavy objects Consistently bend at the waist and/or knees or crawl Consistently climb stairs; occasionally climb ladders up to 20 feet; rarely perform work on building roofs Occasionally lift up to 60 pounds from floor to waist level Stand up to 100% of the workday, may exceed 8/day depending on project needs or breakdowns Ability to distinguish colors (ex: wire color codes) Tolerance of varying environmental conditions - heat, cold, and/or wet and slippery conditions Spanish Translation/Traducción al Espanol Farmers Union Industries, LLC, también conocida como FUI, es una empresa líder en manufactura agrícola con sede en Redwood Falls, Minnesota. Nuestras operaciones actuales incluyen Central Bi-Products, Northland Choice, Midwest Grease, Artex Manufacturing, Redwood Farms Meat Processors y Performance Pet Products. ¡Visite nuestro sitio web fuillc.com para obtener más información! Performance Pet, ubicada en Mitchell, Dakota del Sur, trabaja con marcas grandes y pequeñas para crear una variedad de alimentos enlatados para perros y gatos. Conozca más sobre nuestra actividad en fuillc.com/performance-pet-products/. Actualmente aceptamos solicitudes para Técnico Eléctrico y de Controles. Ofrecemos un salario base inicial de hasta $40/hora (según la experiencia), además de un paquete de beneficios que incluye seguro médico, dental, de la vista, tiempo libre remunerado (PTO), días festivos pagados, una importante contribución al plan 401K y mucho más. Cronograma 1er Turno: Lunes a Jueves, de 6:00am-4:30pm Se podrán realizar horas adicionales de forma obligatoria o voluntaria durante la semana o el fin de semana Áreas de Responsabilidad Todas las áreas de responsabilidad se deben cumplir con GRIT: nuestros valores de Generosidad, Relaciones, Integridad y Trabajo en Equipo. Instalar, inspeccionar, reparar y reemplazar sistemas eléctricos y equipos de automatización Deberes y Responsabilidades Esenciales Instalar, mantener y reparar sistemas de control eléctrico, cableado e iluminación Instalar y configurar hardware y software SCADA, RTU, PLC y redes de comunicación para equipos de producción Supervisar los sistemas SCADA para garantizar el tiempo de actividad, el rendimiento y la precisión de los datos Inspeccionar transformadores, disyuntores y otros componentes eléctricos Solucionar problemas eléctricos, de sistemas de control, sensores de equipos y automatización utilizando los dispositivos de prueba adecuados Reparar y reemplazar equipos, cableado eléctrico y accesorios Cumplir con el Código Eléctrico Nacional y las normativas de construcción estatales y locales Leer y comprender diagramas y esquemas técnicos Realizar mantenimiento correctivo a todos los equipos eléctricos de la planta Comprender los sistemas básicos de climatización (HVAC) y diversos equipos de prueba Comunicar cualquier accidente, amenaza, tiempo de inactividad o medidas de ahorro al Gerente del Complejo Completar con precisión las órdenes de trabajo para documentar los materiales utilizados y el tiempo dedicado a los proyectos de mantenimiento Comunicarse con el Encargado de Piezas e Inventario sobre la adquisición de equipos o piezas, cuando sea necesario Asistir a otro personal de mantenimiento o producción según sea necesario o solicitado Trabajar de forma segura siguiendo todas las políticas, prácticas, procedimientos e iniciativas de mejora de seguridad de la empresa Cumplir con todos los requisitos normativos en materia de seguridad ambiental y alimentaria Mantener una asistencia regular y predecible en el lugar de trabajo Pueden surgir situaciones que requieran que los empleados asuman temporal o permanentemente la responsabilidad de tareas no descritas específicamente en esta descripción del puesto. Se les puede solicitar a los empleados que trabajen horas adicionales o que se adapten a una carga de trabajo superior a la normal. Calificaciones 5 años de experiencia trabajando como electricista o técnico; se valorará la experiencia en fabricación Se valorará la formación de electricista o la finalización de un programa de aprendizaje eléctrico Experiencia en programación SCADA o PLC Conocimiento avanzado de sistemas eléctricos, cableado de control, sistemas de seguridad, planos, mantenimiento y reparaciones Capacidad para resolver problemas de forma independiente o utilizar diversos recursos según sea necesario Conciencia de la importancia de las normas de seguridad alimentaria durante el mantenimiento de equipos Conocimiento de procedimientos de seguridad como entrada a espacios confinados, apertura de líneas, protección contra caídas, bloqueo y etiquetado, y trabajo en caliente Comunicarse eficazmente con supervisores y compañeros de trabajo y seguir instrucciones escritas o verbales Leer y comprender con precisión las señales, etiquetas, advertencias, instrucciones, manuales del operador, manuales de servicio y esquemas de cableado asociados con el mantenimiento o la operación de instrumentos, equipos o el uso de productos químicos Dominio de habilidades matemáticas básicas, medición e interpretación de tendencias de datos; registrar información de forma precisa y legible Comprender y operar sistemas informáticos básicos. Experiencia en Redzone, es un plus Disposición y capacidad para trabajar horas extras entre semana o fines de semana y realizar tareas no especificadas en la descripción del puesto Capacidad para desempeñar puestos sensibles a la seguridad Capacidad para trabajar en instalaciones que procesan diversas proteínas, como carne de res, cerdo, pollo, pavo, pescado, cordero, conejo, canguro y huevo Debe tener 18 años o más para fines del seguro Requisitos Físicos Empujar y/o jalar objetos pesados constantemente Doblar la cintura y/o las rodillas constantemente o gatear Subir escaleras constantemente; ocasionalmente subir escaleras de hasta 20 pies; rara vez trabajar en techos de edificios Levantar ocasionalmente hasta 60 libras desde el piso hasta la cintura Permanecer de pie el 100% de la jornada laboral, pudiendo exceder 8/día dependiendo de las necesidades del proyecto o averías Capacidad para distinguir colores (ej: códigos de color de cables) Tolerancia a condiciones ambientales variables: calor, frío y/o condiciones húmedas y resbaladizas

General Job Description Responsible for installation of electrical components on newly manufactured MASABA mining equipment located at manufacturing site; responsible for troubleshooting, identifying the root cause, repairing or replacing parts, rewiring, and installing related electrical components on MASABA mining equipment at off-site locations; will perform industrial wiring to include maintenance and service for MASABA mining equipment at off-site locations; ensure all work performed is done by following all local and national electrical codes. Essential Job Requirements * Must have previous educational training and/or certification in electronics and electrical theory. * Extensive working experience in electronics, electrical wiring and electrical troubleshooting. * Must possess or working towards a valid electrician's license * Demonstrate strong safety leadership skills and follow safe work practices. * Work as part of a team to plan and conduct equipment repairs. * Respond to unplanned/emergency work requests in a timely & effective manner * Be highly motivated and able to work independently. * Must be able to perform basic shop math functions and use standard measuring devices * Willingness and ability to travel (must be able to obtain passport) * Ability to lift and/or move up to 50 lbs. * Ability to work standing on hard surface (e.g. concrete) for up to 12 hours per day in hot or cold environment. * Good hand and eye coordination * Good visual acuity. * Ability to climb, bend, kneel, crouch and stoop to perform various functions of the position. * Ability to reach with hands and arms. * Must be able to work overtime and weekends if requested. * Must be able to read and understand English. * Must have excellent attendance history. * Other duties as assigned. * Physical Requirements: * This position is typically in a manufacturing setting and requires standing for long periods of time. Requires good hand-eye coordinator, arm, hand and finger dexterity, including ability to grasp. Ability to manipulate (carry, lift, move) objects weighing up to 50 pounds. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Monday - Thursday, 6:00 AM - 5:00 PM with one hour lunch. Some additional Fridays may be mandatory

Description: Ready to put your technical skills to work? Join us as an Electronic Controls Mechanical Technician and use your troubleshooting expertise to keep operations running at their best. If you want steady work, growth potential, and a role where your impact is clear, we'd love to have you. New Employees hired will be awarded a $500 bonus upon completing 30 days of employment with perfect attendance. Mechanical Technician/Electrical Controls Hours: 6:00AM-4:30PM Days: Wednesday-Saturday Pay Rate: $31.59 per hour Job Description: Perform scheduled and unscheduled preventative and predictive maintenance on assigned systems. Diagnose mechanical and electrical circuitry malfunctions using visual and auditory senses, test systems and technical publications Will be responsible for reporting and taking any necessary action to prevent food safety and food quality problems from occurring. Assist in and able to troubleshoot, repair, and maintain production lines and associated assigned systems. Requirements: Requirements and Qualifications: Minimum Education Required: High School Diploma or Equivalent Must possess a strong mechanical and electrical maintenance background. Maintenance on food processing and packaging equipment is preferred. Knowledge of production machinery repair, troubleshooting, pneumatic/hydraulic and electrical/electronic skills. CMMS experience is highly desired. Ammonia Training is a plus. Excellent organizational skills and the ability to effectively prioritize work across multiple tasks in a highly demanding and fast-paced environment. Qualified candidates will possess at least two (2) years of experience in Maintenance with knowledge of Robotics, Automation, PLC's and have a strong background in Electro/Mechanical Maintenance. This position requires regular and prompt attendance during the working hours scheduled by the Department Supervisor. Applicants must have excellent communication skills and enjoy working in a team atmosphere with a strong desire to learn new skills and grow their career. Applicants will be quality and safety-minded, reliable and dependable, conscientious, precise, and self-motivated. In addition to the responsibilities listed above, other duties may be assigned by your supervisor as dictated by business and production necessities. This position requires regular and prompt attendance during the working hours scheduled by the Department Manager. Pass post offer drug test and criminal background check Apply online or in person today! ******************** Walk Ins Available Tuesday and Thursday 8a-1p ************ “Se Habla Español” *Video Interviews Available* Job Source USA 8406 Park Drive, Omaha, NE 68127 (1 Block South of Q on 84th Street) Job Source USA, Inc. is an Equal Opportunity Employer/Vet/Disabled. It is the policy of Job Source USA, Inc. to provide employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, or veteran status.

Special Instructions to Applicant: Please upload a copy of your State of Nebraska Journeyman's Electrical License via other documents. Nature of Work: This is skilled electrical work at the Journeyman's License level, installing, repairing and maintaining electrical and communication wiring, electrical fixtures, equipment and systems in campus buildings and dormitories. Performs varied tasks such as installing conduit and wiring according to building plans and diagrams, installing telephone wiring and computer network wiring, assisting in examining, repairing and maintaining motor, lighting and fan units, repairing and maintaining fire alarms in buildings and dormitories. Direct supervision is received from a technical superior with work reviewed in the form of results achieved and adherence to local, State and Federal electrical codes. Examples of Work Performed: 1.Perform the following tasks at the beginning of the work shift, before/after all breaks, at the end of the work shift, and frequently throughout the work shift; check/respond to email and submit/update scheduled Computer Maintenance Management System (CMMS) tasks. 2. Ability to learn, and use computerized technology to communicate, monitor campus systems, and record keeping per department procedures. 3. Complete work orders and preventative maintenance task as assigned. Maintain communication with the requestor throughout completion of the assigned work order and log data into CMMS. 4. The ability to read, analyze, and interpret technical data; including plans, specifications, and manufacturer design sheets. 5. Knowledge of safety hazards and appropriate precautionary methods involved in building maintenance, repair and construction activities. 6. Ability to analyze and find remedies to electrical problems within campus building and dormitory lighting, security and power systems. 7.Ability to inspects, repair and maintain HVAC electrical units and systems. 8. Perform repairs to electrical appliances, electric motors, fixtures, fire alarm systems, sound systems and controls. 9. Install conduit, power conductors, switches, receptacles, light fixtures and related electrical items including repairs. 10. Ability to use a utility locator and perform locates on campus per requests from digger's hotline, contractors and/or campus maintenance personal. 11. Read and interpret City, State and Federal electrical codes. Ensure adherence of facility and professional safety rules and regulations. 12. Ability to operate and maintain public address systems and equipment for campus special events and athletic competitions. 13. Ability to perform maintenance on freight and passenger elevators. 14. Leadership and training of co-workers and student employees. 15. Communicate effectively and professionally with the public, contractors, staff, and students. 16. Support graduation ceremonies and other special events. 17. Snow removal as needed. Required Qualifications: * High School education or GED * 2 years Work experience repairing and maintaining electrical systems or any combination of skills, knowledge and abilities that meet these requirements. Required License/Certifications: * Ability to possess a valid State of Nebraska Journeyman Electrician or Electrical Contractor License prior to employment start date. * Valid Driver's License Other Requirements: * Background Check * DMV Check About Us: Wayne State College serves as a model of success for regional public higher education. Investments in infrastructure and facilities, expanded academic programs and partnerships, a whole-campus approach to recruitment and retention, and a commitment to strategic planning position the College as a strong member of the Nebraska State College System. More than 4,500 students rely on Wayne State for access to graduate and undergraduate degree programs in more than 130 programs of study each year, a role the College has proudly filled since its founding in 1891. Our goals are clear: continually improve retention and graduation rates, provide high-quality academic programs and campus facilities, support workforce and economic development in the region, maintain affordability and access, and manage resources for sustainability. We invite qualified applicants to join us in our important work. Information at a Glance Apply now Req Id: 882 Org Unit: Facility Services WSC Open Until Filled: Yes Union: Nebraska Association of Public Employees (NAPE) Job Location: Wayne, NE 68787 Advertised Salary: Minimum Annual Salary is $41,141. Job Type: Full-Time Benefits Eligible: Yes FLSA Status: Nonexempt For questions or accommodations related to this position contact: ********** The Nebraska State Colleges are equal opportunity institutions and prohibit unlawful discrimination and harassment. Each College has designated an individual to coordinate the Colleges' non-discrimination efforts to comply with regulations implementing Title II of the Americans with Disabilities Act, Titles VI and VII of the Civil Rights Act, Title IX of the Education Amendments of 1972, the Age Discrimination Act of 1975, and Section 504 of the Rehabilitation Act. Inquiries regarding non-discrimination policies and practices may be directed to the Compliance Coordinators assigned at each College and identified on each College website. Posting Start Date: 9/9/25 Search Jobs

Job Description As an HVAC apprentice ductwork installer, your primary responsibility will be to assist in the installation, repair, and maintenance of ductwork systems for heating, ventilation, and air conditioning (HVAC) systems. This may include working on both commercial and residential properties. Your specific duties may include: Assisting in the installation of HVAC ductwork, including measuring and cutting materials, assembling components, and sealing joints. Assisting in the repair and maintenance of HVAC ductwork, including identifying and fixing leaks, replacing damaged components, and cleaning and inspecting ducts. Following safety protocols and wearing appropriate protective gear to avoid injury or exposure to hazardous materials. Communicating effectively with other members of the installation team, as well as with clients and building owners. Maintaining tools and equipment in good condition, and properly storing and securing them when not in use. Learning about HVAC systems and building codes and regulations to ensure compliance with industry standards. Following established procedures and protocols for completing projects on time and within budget. To qualify for this position, you should have a high school diploma or equivalent, and some basic mechanical knowledge. You should be able to lift heavy materials, work in confined spaces, and have good hand-eye coordination and manual dexterity. Additionally, you should be able to work independently and as part of a team, and be willing to learn new skills and techniques as needed. You will also be required you to have a valid driver's license and reliable transportation. Being punctual, on time and work ethic are highly important and a basic requirement. Benefits: PTO 401K Vacation Alternative Investment Dental Vision #hc75018

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Schuyler, NE Job Type: Full Time Shift(s) Available: 2nd Compensation: $31.50/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Assist in design of electrical projects and install electrical equipment Coordinate efforts with other workers involved in installing and maintaining equipment or components Consult with operators, supervisors, and engineers to plan layout of equipment and to resolve problems in system operation and maintenance Determine feasibility of using standardized equipment and develop specifications for equipment required to perform additional functions Work with voltage levels up to 480, 4160. Wire Variable Frequency Drive's Study blueprints, schematics, manuals, and other specifications to determine installation procedures Perform instrumentation calculation, set up of parameters and limits Modify industrial electronic devices, circuits, and equipment in order to meet available specifications Set up and test industrial equipment to ensure that it functions properly Perform scheduled preventive maintenance tasks, such as checking, cleaning, and repairing equipment, to detect and prevent problems before they occur Inspect components of industrial equipment for accurate assembly and installation and for defects such as loose connections and frayed wires Advise management on whether continued operation of equipment could be hazardous Maintain equipment logs that record performance problems, repairs, calibrations, and tests Examine work orders and converse with equipment operators to detect equipment problems and to ascertain whether mechanical or human errors contributed to the problems Operate equipment to demonstrate proper use and to analyze malfunctions Repair, install and adjust equipment, machines, and defective components, replacing worn parts such as gaskets and seals in watertight electrical equipment Install coaxial or fiber optic cable for computers and other telecommunications equipment Maintain inventory of spare parts. Send defective units to the manufacturer or to a specialized repair shop for repair When breakdowns occur, make necessary repairs as quickly as possible in order to minimize inconvenience Test faulty equipment to diagnose malfunctions, using test equipment and software, and applying knowledge of the functional operation of electronic units and systems Work extended shifts to support the facility which may require coming in early, before normal shift and staying over later than normal shift Short notice may be given when coming in early or staying over late. May be called in to make repairs on nights, weekends or holidays Be flexible and adapt to changing priorities Must follow the National Electric Code; comply with state and Cargill standards Assist plant with management of outside contracted electrical projects for quality to comply with Cargill specifications Participates in ongoing skill level improvement training and apply what is learned Performs all requested tasks professionally and in a reasonable time frame Is flexible and able to adapt to changing priorities Work indoors and outdoors in a plant environment Enter confined spaces under proper permit conditions and supervision Troubleshoot problems as required Maintain a safe and sanitary atmosphere Inspect buildings, grounds, and equipment utilized by facility; determine immediate and long range needs for maintenance and repair work Enter notifications utilizing maintenance computer program Understand and adhere to state and federal Occupational Safety and Health rules and regulations as related to plant safety Follow all Cargill safety rules and regulations, including use of proper PPE Complete all housekeeping assignments, work to improve the condition of the department, and work as a team member with a positive attitude Attend various mandatory safety and department meetings Communicate in a courteous and positive manner to accomplish duties effectively, working as a team with all involved Assist other plant personnel as needed and will perform any other duty as requested by the supervisor Required Qualifications Must be eligible to work in the united states without visa sponsorship Must be 18 years or older Must be able to perform physical job duties including bending/stooping, climbing ladders, and work in confined spaces Ability to lift a minimum of 50 pounds Must be able to work under special work conditions, such as extreme heat or cold Ability to work in elevated areas Must be able to operate machinery Must be able to read/write English High School diploma or Equivalent Basic computer skills including being able to enter and retrieve data Ability to work overtime Ability to work holidays, nights, weekends or different shifts Must be able to perform electrical maintenance trade Experience working with blueprints, schematics, manuals, and other specifications and the mathematical knowledge required for such work Must be able to operate mobile equipment Must have a high degree of mechanical aptitude Demonstrated ability to perform basic mathematical functions including addition, subtraction, multiplication, division and percentages Must be willing and able to work in inclement conditions and extreme temperatures Must be able to work in an outdoor, and indoor plant environment Must have very good time management skills with ability to prioritize tasks and work independently Install conduit and pull wire Have a strong commitment to safety Must have adequate transportation Craftspeople in this position will use multiple tools such as multi-meter; 500-to-1000-volt meg-ohm tester; voltmeter; ohmmeter; mobile equipment; safety equipment and PPE Preferred Qualifications Experience with wiring and programing Allen Bradley Programmable Logic Controllers Experience using electrical test equipment to perform analysis and troubleshooting Knowledge of the National Electric Code Mechanical aptitude to work from all types of blueprints, maintenance manuals, and drawings Apprentice, Journeyman or above license with the state of Nebraska or equivalent A 2-year degree in electromechanical, electrical system, or equivalent Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.