Electrical Design Engineer

Top Electrical Design Engineer Skills

Below we've compiled a list of the most important skills for an Electrical Design Engineer. We ranked the top skills based on the percentage of Electrical Design Engineer resumes they appeared on. For example, 17.7% of Electrical Design Engineer resumes contained Electrical Systems as a skill. Let's find out what skills an Electrical Design Engineer actually needs in order to be successful in the workplace.

The six most common skills found on Electrical Design Engineer resumes in 2020. Read below to see the full list.

1. Electrical Systems

high Demand
Here's how Electrical Systems is used in Electrical Design Engineer jobs:
  • Served as an adviser for the data center senior management on electrical systems capabilities and limitation.
  • Researched aircraft configurations to ensure proper interface between aircraft electrical systems and the interior products.
  • Configured electrical systems to meet customer specifications for emergency and vocational vehicles.
  • Utilized electrical components and their function in electrical systems.
  • Design electrical systems for mobile industrial equipment.
  • Performed evaluation of existing electrical systems.
  • Consulted in cost estimating, assisting and supporting clients to upgrade electrical systems such as smart houses.
  • Budget analyst for electrical systems design, about materials and necessary machines to develop the projects.
  • Trained with experienced engineers and design specialists on the design of electrical systems for commercial facilities.
  • Designed the electrical systems from the ground up to finish on time.
  • Design Commercial and Industrial Electrical systems and wiring diagrams using AutoCAD.
  • Developed wiring diagrams to be used for installation of electrical systems.
  • Created complete bills of material for vehicle electrical systems.
  • Design Engineering / Electrical Systems Engineering & Design Leader.
  • executed field verification of existing electrical systems and developed CAD documentation for upgrades.
  • Provide electrical systems integration and liaison engineering in support of production.
  • Designed electrical systems for water and wastewater facilities.
  • Design entire electrical systems for hospitals, hotel, houses and roads in coordination with Black and Veatch and USAID.
  • Designed electrical systems for whole plant brick production system, Setting through Dehacking...
  • Experience & Accomplishments: Effectivity Engineering: design updates for cabin electrical systems.

Show More

2. Autocad Electrical

high Demand
Here's how Autocad Electrical is used in Electrical Design Engineer jobs:
  • Designed engineering drawings and assembly drawings for automation and control systems, using AutoCAD Electrical.
  • Maintain electrical drawings, address customer comments and update existing drawings using AutoCAD Electrical.
  • Produced electrical and control design schematics in AutoCad electrical.
  • Developed a standard for AutoCAD Electrical technical documentation.
  • Take projects from start to completion by designing electrical hardware using AutoCad Electrical 2013.
  • Implemented daily AutoCAD electrical design and revisions as per change orders when needed.
  • Used AutoCAD Electrical 2013 as design CAD program.
  • Created AutoCAD Electrical drawings for glass bending furnaces.
  • Develop schematics and electronic/electrical layouts using AUTOCAD Electrical Prepare purchased part material lists and component drawings.
  • Utilized AutoCAD Electrical to design Electrical Schematics and Wirelists.
  • Coordinate with architects, project managers, and electrical contractors using various software: AutoCAD Electrical, MEP and Revit.
  • Design complete electrical and electronic control systems for Gear and Hobbing machines using AutoCAD Electrical software.
  • Utilize AutoCAD Electrical and ProE to render, review, and print engineeringdrawings.
  • Researched electrical components and created BOM in AutoCAD Electrical production of Equipment Assisted in machine integration for startup and test.

Show More

3. Electrical Design

high Demand
Here's how Electrical Design is used in Electrical Design Engineer jobs:
  • Familiarized with Southern California Edison standards, including electrical construction station, electrical design station and other Southern California Edison processes.
  • Prepared detailed electrical design drawings in Auto CAD for Developing of electrical site plans and utilizing GIS information.
  • Developed electrical design options or recommendations for plant structures, systems and components.
  • Reviewed existing electrical designs and specifications being purchased or fabricated.
  • Coordinate electrical design work with other disciplines.
  • Worked as a Junior Electrical Designer/Engineer.
  • Conduct functionality, safety and integrity of the electrical designs and the compliance with DNV and IMO Codes and Design Practices.
  • Provided draft and electrical design assistance for a wide variety of projects, from report stage to design and construction.
  • Carried out all phases of electrical design and parts selection from prototyping through final product design and build.
  • Supervised 8 draftsmen, 2 electrical design engineers, and 2 mechanical design engineers for manufacturing data delivery.
  • Worked as Electrical Design Engineer, supported Economic Simplified Boiling Water Reactor (ESBWR) project.
  • Prepare the Electrical Design and Construction packages for various facilities in Oil & Gas Field.
  • Managed electrical design aspects from Lighting, High/Low voltage, and fire alarm detection system.
  • Performed various tasks relevant to the electrical design of Aircraft Galley systems.
  • Write and Review Electrical Design standards.
  • Design Modification Engineering Developed, approved and implemented over 200 instrumentation/electrical designs and modifications.
  • Created electrical designs for Low Voltage Alternating Current induction motors to meet NEMA (National Electrical Manufacturers Association) Standards.
  • Used OrCAD Capture, View-logic, View-draw and Xilinx ISE electrical design tools.
  • Provided electrical designs for the following commercial in house projects; I.
  • Delivered electrical design of 30 customized low and medium voltage switchgears and MCCs ranging from 600 V to 15 kV.

Show More

4. Panel Layouts

high Demand
Here's how Panel Layouts is used in Electrical Design Engineer jobs:
  • Loop sheets, wiring diagrams, panel layouts and bill of material drawings, instrumentation location plans, schematic wiring diagrams.
  • Prepared assembly drawings and control panel layouts, and release to the floor.
  • Supply control panel layouts, site plans, and wiring diagrams.
  • Detail instrumentation, electrical 2-D AutoCAD 2010 panel layouts.
  • Designed, built, and wired panel layouts.
  • Prepared electrical and control panel layouts.

Show More

5. Wire Harnesses

high Demand
Here's how Wire Harnesses is used in Electrical Design Engineer jobs:
  • Designed the complete electrical controls and wire harnesses for blast hole drills and shovels used in open pit mines.
  • Required the use of AutoCAD to create wire diagrams, wire harnesses, check drawings and prepare ECN's.
  • Developed electrical panels, wire harnesses system layout and electrical schematic across entire marine product line.
  • Identified, diagnosed and resolved field and manufacturing problems of wire harnesses and electrical controls.
  • Design and develop power and signal distribution of wire harnesses for heavy off road vehicles.
  • Develop/fabricated panels, racks, control enclosure, cables, and wire harnesses.
  • Design and manually made prototype wire harnesses for Wheel Loaders and Grader platforms.
  • Create and update Saber schematics for all wire harnesses outside the cab.
  • Routed and modified wire harnesses and equipment using CATIA V5.
  • Work to obtain CSA certification on all new wire harnesses.
  • Design of wire harnesses to interface electrical components.
  • Design wire harnesses for military vehicles.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Control Systems

high Demand
Here's how Control Systems is used in Electrical Design Engineer jobs:
  • Analyze and simulate low power circuits, front-end amplifiers and develop analog signal conditioning circuitry interfacing the digital control systems.
  • Ensured embedded programs were fully tested and integrated with power control systems to ensure instantaneous critical system backup power.
  • Developed logic schemes and designed analog control systems for custom process cooling equipment per customer specifications.
  • Designed instrumentation and automatic control systems for custom printed circuit board wet processing equipment.
  • Determined and specified code requirements for process control systems and design criteria.
  • Performed engineering design and electrical schematics for automation and control systems.
  • Performed failure analyses on digital control systems and industrial automation networks.
  • Authored the DDG-51 Ships Information Book & Training Aid Book for Power Distribution, Alarm, Indicating and Propulsion Control Systems.
  • Designed custom control systems for heat processing equipment for the electronics, automotive, semiconductor, bio-medical, and pharmaceutical industries.
  • Design, quote, and implement power distribution and control systems for manufacturing and other environments Nashville and surrounding counties.
  • Designed Large and Small Engine Control Systems for the repair and testing of piston and jet engines.
  • Designed system risers and control systems for video display boards optimizing power placement and signal routing.
  • Design of UL 508A and CE compliant electrical control systems for domestic and export markets.
  • Developed PLC code for automation, pneumatic, and control systems.
  • Design Control Systems for Environmental Chambers for the Pharmaceutical Industry.
  • Design electrical control systems for various functions on heavy equipment.
  • Constructed multiple PLC control systems housed in UL508A cabinets.
  • Designed electric control systems for energy management, manufacturing and maintenance ( Petrochemical Factory)
  • Design and electrical support for control systems for light/large commerical HVAC systems.
  • Designed MFCs, MFMs gas panel control systems.

Show More

7. CAD

high Demand
Here's how CAD is used in Electrical Design Engineer jobs:
  • Document schematics for existing test cell configurations with AutoCAD electrical 4.
  • Developed and maintained electrical schematic packages using AutoCAD Electrical 2010.
  • Prepared electrical and non-electrical drawings using AutoCAD.
  • Provided electrical/mechanical data using AutoCAD.
  • Worked on the NERC project, modeling transmission lines with PLS-CADD for various states to find where the clearance issues are.
  • Developed Single Line, Elementary, Wiring and Physical Diagrams for Demolition, Construction and As-Built projects using AutoCAD Modeling.
  • Design and develop drawings using CAD for commercial solar projects ranging in size from 50KW up to 30MW Worldwide.
  • Drive system and component testing Used Pro/Engineer Wild Fire 4.0, w/ Pro/cable and AutoCAD Electrical 1.
  • Created board layout, Schematics and parts lists of an ECM using AutoCAD.
  • Experience: Supervisor in AutoCAD and E&I Cad operator.
  • Design wiring schematics for entire vehicle using Mentor Graphics CAD software.
  • Designed power layout for industrial power distribution, using AutoCad.
  • Worked as an electrical designer with full knowledge of ACAD.
  • Completed construction documents with the use of AutoCAD.
  • Used AutoCAD R12 as required.
  • Utilize AutoCAD 2D and 3D.
  • Designed electrical controls using Autocad Electrical 2013.
  • Design electrical distribution systems using AutoCAD Electrical 2013 for waste water and recirculation systems used in the Gas and Oil industry.
  • Circuit analysis executed using PSPICE simulation and MathCAD for Derating & Survivability standards.
  • Designed wiring harness and created Cable Drawings using AutoCAD 2008 for Pilatus Aircraft and Pilatus Simulator.

Show More

8. PLC

high Demand
Here's how PLC is used in Electrical Design Engineer jobs:
  • Integrated pneumatic/hydraulic systems operations using various Programmable Logic Controller (PLC) techniques for proper equipment functioning.
  • Designed electrical/mechanical slitting and winding equipment and did installation design of PLC Controls.
  • Worked with polarity reversal, high current DC power supplies, PWM, and Programmable Logic Controller (PLC)
  • Designed tank mixer systems and integrated them with the PLC and level sensor systems in Alberta and Montana.
  • Trained in CAD drawing, controls design and PLC and computer programming and other engineering practices.
  • Participate in design CAD layout of electrical power and instrumentation for Allen Bradley PLC controls systems.
  • Created PLC programs for newly installed PLC's and modified existing PLC programs.
  • Programmed a variety of PLC'S and Operator Interface Terminals.
  • Modified logic diagrams for AB PLC 5 software upgrades.
  • Design of PLC base control products.
  • Interfaced with facility PLC/SCADA/DCS systems.
  • Programmed PLC and DCS logic.
  • Provided technical support to domestic and international clients resolving ALS-Empirica s mobile lab purge systems running on SIMATIC S7-1200 PLC.
  • Designed front-end user interface and PLC code to tie multiple original and third party equipment together to function as one.
  • Specialized in a broad range of products including FactoryLink, Wonderware, In Touch, Allen Bradley PLC5
  • Designed PLC cabinets and power systems for 480V motor control centers and [ ] substations.
  • Developed new wash algorithms via PLC and Labview programming.
  • Reprogramed controllers, PLC's and DCS equipment.
  • Design and test electrical panels with 440VAC distribution, relays, motor controllers, CNCs, PLCs, etc.
  • Utilized RSLogix 5000 for the programming of Allen Bradley PLCs.

Show More

9. PCB

high Demand
Here's how PCB is used in Electrical Design Engineer jobs:
  • Document block diagram, cable drawing, PCBA schematics, component specification, BOM, test, and assembly procedures.
  • Designed, tested, and brought to market three PCB's for an overhead attendant call/lighting panel assembly.
  • Use Mentor Graphics schematic capture to generate test PCB's utilized in Comanche helicopter and JSF avionics systems.
  • Performed Thermal, Vibration and Stress tests to the UUT down to the PCB and component level.
  • Designed digital and analog electronic circuits, including schematic capture and PCB layout for unmanned aerial vehicles.
  • Designed and validated analog and digital interface printed circuit assemblies(PCA or PCB).
  • Design a break-out PCB to meet the needs of implementing Revelation ST. 4.
  • Contracted to design an ASIC evaluation board and directed the PCB layout.
  • Gained knowledge in PCB design software - CadSoft EAGLE 6.0
  • Supervised drafter in the design of PCB layouts.
  • Designed and tested with Capture Layout & PCB.
  • Specialized in Circuit Assembly and PCB Designing.
  • Team Lead for the Printed Circuit Board (PCB) Process Team.
  • Created and verified circuit designs, PCBs, and documentation for control systems of an electronics platform for therapeutic hospital beds.
  • Designed PCBs to be used for breaking out functions and exercising interfaces of single-board computers.
  • Created schematics, PCB Multi- Layer Layout, BOM, drawings, procedures.
  • Design responsibilities included schematic entry as well as PCB design using Altium Designer.
  • Designed and did layout for PCBs using PADS Mentor Graphic Software.
  • Assisted in creation of test fixtures to calibrate and verified full functionality of FCE and PCBs respectively.
  • Job Description: Design, test, and characterize mixed signal multi-layer PCBs for communication system.

Show More

10. Analog

high Demand
Here's how Analog is used in Electrical Design Engineer jobs:
  • Design and validate analog and digital hardware for medical monitoring instruments in accordance with applicable medical regulatory standards.
  • Designed and constructed prototype PC controlled analog signal processing circuits for an infrared satellite navigation sensor.
  • Completed validation testing of an analog integrated positioning project started by another engineer.
  • Converted existing analog monitor into a digitally controlled and calibrated design.
  • Designed complex microprocessor control board to replace analog control equipment.
  • Perform analog circuit simulation using Spice.
  • Designed, built and qualified an analog/digital circuit card assembly to control LED signs installed on light rail cars.
  • Designed and developed PCI bridge interface, ATM SAR and DSL analog front end AFE controller and hybrid interface.
  • Design, and develop low-power battery operated blood glucose systems with focus on analog circuits and systems integration.
  • Developed hybrid digital, analog, & PLC controls for Hydraulic Press controls.
  • Designed analog aircraft flight and engine controls from initial concept to production.
  • Integrated new and existing digital and analogue instrumentation with PLC system.
  • Design analog circuits (1 phase/ 2 phase motors).
  • Designed high power analog circuitry that interfaces the transducers.
  • Design and Development of Analog Electronics for Oil Industry Tool
  • Designed analog and digital circuit for various products.
  • Devise circuitry for PIC32 to support Analog Input 4-20mA or 0-10V selectable.
  • Research and Development) Designs analog and digital circuits with microprocessors.
  • Directed the analog and digital design of 400 nm and 650 nm wavelength detectors for medical prototype company.
  • Developed digital, analog, VHDL (Altera Maxplus II), and optics designs for control circuits.

Show More

11. Test Procedures

high Demand
Here's how Test Procedures is used in Electrical Design Engineer jobs:
  • Drafted and updated technical documentation, schematics, user manuals, system certification documents and test procedures.
  • Created and implemented test procedures for prototype development and designed automated testers for high-volume production.
  • Developed test procedures, created documentation, followed GMP, safety and regulatory agency submissions.
  • Develop test procedures and quality verification specifications.
  • Perform environmental testing per test procedures.
  • Evaluated and generated Test Procedures.
  • Assisted in writing test procedures, assembly procedures, and devise a test board to verified and validate the device functionality.
  • Administered design level support by generating test procedures, performing test development and execution for C&DH.
  • Test fixture design to enable sub-system testing and writing of test procedures for use by production personnel.
  • Created formal documentation for both hardware and software designs, hardware and software test procedures.
  • Prepare in depth test procedures for on-site electrical engineers for troubleshooting and maintenance purposes.
  • Created test procedures and interpreted results of testing to ensure motor performance.
  • Developed and ran multiple test procedures for new control devices.
  • Write and establish functional test procedures for new products.
  • Prepared test procedures for testing of prototypes.
  • Improved test procedures and equipment.
  • Documented 700+ page design specifucation by documenting each finished design with details from functionality to test procedures to redesign.
  • Generated design specifications and test procedures for numerous Telecom power system products.
  • Documented 500+ page design specifucation and test procedures at the end of development stage of each design.
  • Created test procedures to verfy the quality of each circuit board.

Show More

12. Engineering Support

high Demand
Here's how Engineering Support is used in Electrical Design Engineer jobs:
  • Provided the flight-line and the manufacturing shop with engineering support for aircraft build-up & modification per customer specifications.
  • Traveled to our China manufacturing facility to provide Engineering support and oversee product development.
  • Provided controls engineering support to multiple manufacturing facilities.
  • Provided engineering support to the Amarillo manufacturing team.
  • Provided engineering support during airplane validation.
  • Provided engineering support to manufacturing organization.
  • Provided Engineering Support to production.
  • Assisted in design of microprocessor-based switch matrix card and Ethernet line card and provided engineering support of existing designs.
  • Provide manufacturing engineering support (mechanical & electrical) thorough the manufacturing process and Test Lab.
  • Provide electrical engineering support for design, integration and testing, including schematic capture and layout.
  • Provided engineering support and design for power and controls through the use of Computer Aided Design.
  • Travel to customer's site to install and start up equipment and provide engineering support.
  • Manage production line activities, and provided engineering support in hardware and software testing.
  • Provided engineering support for system start up on two new diaper assembly lines.
  • Provided engineering support to harness vendors to insure they were built to specifications.
  • Provide Engineering Support and troubleshooting skills of mechanical, electrical and process control.
  • Provided engineering support for existing products and NPI- New product Introduction.
  • Provided engineering support for C&DH sub-system for EOS.
  • Provided engineering support to the Advanced Composite Center ACC.
  • Deployed to the HSO/Customizing group in Mirabel to provide engineering support for the model 429 aircraft.

Show More

13. NEC

high Demand
Here's how NEC is used in Electrical Design Engineer jobs:
  • Conducted field surveys to determine relative site conditions necessary in the preparation of detailed design.
  • Assist customers to resolve engineering service requests when necessary.
  • Lean Manufacturing, Mechanical/Electrical/Electronic Systems Design Engineering: o Power distribution and Lighting Control design to UL 508A & NFPA/NEC.
  • Create EO's and upper level bills that include all hardware necessary to build new bridges in the shop.
  • Defined designed requirements for systems to meet UL standards, OSHA regulations, NFPA and NEC National Electrical Code.
  • Defined Product design requirements, based-on NEC/ IEC / CSA standards and submitted product designs for NRTL certification.
  • Create schematics and interconnect wiring diagrams using Auto CAD for use in building new bridges in the shop.
  • Reference work and firm understanding with NEC (National Electrical Code) 2002 edition (NFPA 70).
  • Researched comprehensive data for the procurement of long lead wire harness connectors for the SLS core stage.
  • Verified cable interconnect diagram for software integration test facility (SITF) for technical accuracy.
  • Specify equipment such as transformers, disconnects, and required to power VFD auxiliary equipment.
  • Designed solar energy systems to operate either connected to or disconnected from the utility grid.
  • Used Ethernet and WiFi connections to broadcast data to remote database.
  • Increased proficiency in CAD based programs, NEC knowledge and Title-24.
  • Address wire harness assembly issues and make necessary design changes.
  • Design all details necessary for shop and field installation.
  • Prepared contract deliverables including schematics, connection diagrams, Cable & Raceway schedules, and Master Device List.
  • Define special processes such as harness color coding, connector clocking, shield terminations and backshell potting.
  • Designed electrical control panels for product and crate sortation machines that met UL and NEC standards.
  • Meet electrical code requirements for all electrical work with NEC codebook.

Show More

14. Alarm Systems

high Demand
Here's how Alarm Systems is used in Electrical Design Engineer jobs:
  • Programmed alarm systems and wrote its operator manual and programming procedures
  • Applied NFPA and local jurisdiction guidelines to create layouts for fire alarm systems and life safety exit signage.
  • Perform electrical inspections on Power, Lighting and Fire alarm systems accordance with the National Electrical Code.
  • Create fire alarm systems and ensure compliance with national and international standards for electrical compliance.
  • Design of fire alarm and intrusion alarm systems, CCTV, intercoms and telephone systems.
  • Specified switchboards, electrical panels, cables/wires, fire alarm systems, etc.
  • Developed control logic designs for manufacturing equipment, rotating electrical machines, controllers and alarm systems using Allen-Bradley RSLogix 500.

Show More

15. Circuit Boards

average Demand
Here's how Circuit Boards is used in Electrical Design Engineer jobs:
  • Designed and developed PC interface, communication and control circuit boards for cutting and routing machines including LAN, RS232 communications.
  • Performed a Single Event Effects (SEE) radiation analysis for components on the MRJ BCU printed circuit boards.
  • Design Engineer, developed, integrated and introduced numerous circuit boards for our custom product and PC based architectures.
  • Generated detailed system diagrams and LRU schematics using AutoCAD software, designed customized circuit boards using Eagle software.
  • Launched new designed circuit boards that were approved by the department management to be used in field service.
  • Monitor the safety of the high power test areas, ESD precautions while dealing with circuit boards.
  • Developed DAC and ADC controls for multiple circuit boards using SPI as the method of communication.
  • Designed high-speed digital parallel bus architecture, and interface circuit boards for vendor systems.
  • Design modifications to several circuit boards to add new features for customer needs.
  • Learned to hand solder circuit boards in an efficient and proper manor.
  • Involved in the design of Printed Circuit Boards and the circuit simulation.
  • Tested and troubleshot circuit boards and prototype units in lab settings.
  • Designed, tested and integrated various custom circuit boards.
  • Design of circuit boards for optical communication systems.
  • Specify components using in new boards and work with fabrication house to design layout and stuff printed circuit boards.
  • Involved in developing test fixtures and diagnostic tools for testing electronic modules, printed circuit boards and system.
  • Design, prototype and test printed circuit boards for Uninterruptable Power Supplies.
  • Developed software and designed circuit boards used for microcontrollers (Microchip).
  • Design of all circuit boards of Yafo's on the first spin and all R & D board.
  • Designed circuit boards Managed engineering of projects Developed data security system Directed technicians

Show More

16. BOM

average Demand
Here's how BOM is used in Electrical Design Engineer jobs:
  • Developed AutoCad drawings, purchase specification for manufacturing and generated BOM structure.
  • Develop specifications and engineering support documentation for BOM structures, wiring, fusing, systems architecture, and schematics.
  • Performed testing, troubleshooting, developing quotations, and creating BOM's, instructions and drawings.
  • Control panel SCCR short circuit current ratings, power rating, and FLA, BOM.
  • Led process improvement directed towards instrumentation and electrical bill of material (BOM).
  • Created Bill of Materials (BOM) for each assigned project using SAP.
  • Check 3D Wire harness routing, brackets and relevant document for Bombardier standards.
  • Assigned a Digital Mock-Up (DMU) and net meeting with Bombardier partners.
  • Constructed Bill of Materials (BOM) for each design layout.
  • Provided associative parts lists (BOM) for all assemblies.
  • Create Bill of Materials (BOM's) using SAP.
  • Prepare Bills Of Materials (BOM's).
  • Created BOMs and ensured ALD designs met required electrical/mechanical specifications.
  • Provided Cable and Conduit sizing; BOM for Electrical and Instrument effort, specifications for Mcc and UPS system.
  • Create BOMs using SAP, record parts for SAP database, process ECO's for Electrical and Mechanical drawings.
  • Developed one-line diagram and BOM for the LM 2500 Auxiliary Skid for the Fast Ferry Project.
  • Managed BOMs and collaborated with Product Vendors, securing the items and ensuring operation.
  • Created one line diagrams, I/O schematics, control panels and BOMs as required.
  • Create netlist and BOM's.
  • Created cable assembly drawings, BOMs and engineering documentation.

Show More

17. Technical Support

average Demand
Here's how Technical Support is used in Electrical Design Engineer jobs:
  • Shop Visits in order to provide technical support with manufacturing regarding problems relating to custom designs, specification and functional performance
  • Selected thermal hardware to support testing of radiator panels Provide technical support to manufacturing.
  • Provided technical support to create proposals for sales/marketing department.
  • Provided technical support to manufacturing for legacy programs.
  • Field Support- Provided technical support and design interpretation.
  • Provided technical support to manufacturing and material procurement.
  • Provided technical support for system operations and maintenance.
  • Provide technical support and guidance by the phone to the field crew during the project start-up.
  • Provide technical support to sales, engineering, inventory control, production, and testing.
  • Provided technical support to the plant for power system models and implemented design modifications.
  • Provide technical support for the electrical department, client (military) and vendors.
  • Provide technical support for usability issues and critical site problems, as needed.
  • Provided primary technical support to the low Voltage Power System and Raceway System.
  • Assisted production, sales and service departments with technical support.
  • Provide technical support for customers, production floor and engineering.
  • Provided Field Service technical support for three customer installations.
  • Provided technical support and training to users of AutoCAD.
  • Provided technical support and on-site training to clients regarding solar powered systems operation and maintenance.
  • Provide technical support to the assembly and manufacturing line, as well as remote support to onsite engineering team.
  • Provide professional technical support to external sales, customer services, manufacturing, purchasing and quality control.

Show More

18. Shop Drawings

average Demand
Here's how Shop Drawings is used in Electrical Design Engineer jobs:
  • Executed quality control evaluations on shop drawings for adherence to construction specifications.
  • Lead and supervise group of draftsmen to ensure high quality of shop drawings production within project time frame and site requirements.
  • Provide lighting calculations, energy saving designs for commercial and residential projects, as well as reviewing and editing shop drawings.
  • Prepare and design shop drawings for 23 substations below ground and above ground and submit to client for approval.
  • Generated shop drawings and various Architectural / MEP designs adhering to stringent Port Authority requirements and Industry Standards.
  • Approved Shop drawings, Panel GA drawings and control Circuit layouts received from Contractor for execution.
  • Review shop drawings, coordinate with various trades to provide service to site.
  • Produced shop drawings and 3D piping and equipment drawings utilizing AutoCAD MEP.
  • Prepare shop drawings, estimate of materials and quotation.
  • Conducted site visits, review and submit shop drawings.
  • Increased ability to create and produce accurate shop drawings.
  • Reviewed Shop drawings for Electrical devices and equipment.
  • Shop Drawings preparation and review.
  • Maintained Construction Administration, which included reviewing shop drawings, answering RFIs, preparing sketches as required and inspecting job sites.
  • Job Description: I have done the following jobs; Checking and review the shop drawings submitted by the concern contractors.
  • Control panel design and shop drawings Ensure design proposals meet customer needs and monitor implementation for technical correctness.
  • Review contractor's submittals in relation to scheduling, materials, shop drawings QC programs etc.
  • Reviewed shop drawings, submittals, RFI's, and facilitated all other CA questions.
  • Performed construction administration services, including shop drawings, RFIs, and site visits.
  • Prepare Substation Layout.11KV as well as 33KV Approving Panel Shop Drawings.

Show More

19. Electric Motors

average Demand
Here's how Electric Motors is used in Electrical Design Engineer jobs:
  • Moved on to design and prototyping for small AC and DC electric motors.

Show More

20. Fpga

average Demand
Here's how Fpga is used in Electrical Design Engineer jobs:
  • Design tools used include Mentor Graphics, Saber, and ViewLogic for both board level and some basic FPGA design.
  • Designed, simulated, verified, and troubleshot multiple FPGA designs from while managing budget and schedule.
  • Designed, implemented, simulated, verified, troubleshot, and documented several FPGA designs.
  • Designed, tested and debugged several features in VHDL for CPLD and FPGA.
  • Worked on two FPGA-to-ASIC conversions using Mentor Graphics ModelSim for VHDL test benches.
  • Implemented an FPGA enhancement to record accurate encoder transition time measurements to SDRAM.
  • Interfaced and configured ADC / DAC chips to work with FPGA.
  • Developed the digital and analog design for a common alarm central office card based on an Altera FPGA.
  • Developed functionality for a Xilinx Spartan FPGA on one of the boards in the system using VHDL.
  • Completed design from initial concept to production prototype and included 16-bit fixed point DSP and Actel FPGA.
  • Utilized Xilinx FPGA editor/timing tools to modify/change FPGA images use in cell phone base stations.
  • Design implemented several linear power supplies for an FPGA based design with a softcore processor.
  • Served as an FPGA Engineer designing graphics processing FPGAs in cockpit flight displays.
  • Create automated functional tests for FPGA (Xilinx Spartan3) and ASIC.
  • Synthesized code using Synopsys FPGA Express.
  • Ported the Fast-Fourier-Transform FFT algorithm into Altera FPGA Cyclone III, it is programmed in Verilog.
  • Served as an FPGA/Firmware Engineer designing FPGAs for audio/video transcoder and decoder equipment.
  • Designed and implemented many different features on FPGA/CPLD using Altera components.
  • Developed VHDL firmware for Xilinx Kintex/Artix 7 FPGA's.
  • Implemented embedded microcontrollers (Microblaze) onto Xilinx FPGAs.

Show More

21. UL

average Demand
Here's how UL is used in Electrical Design Engineer jobs:
  • Review all plans and specifications before completion to ensure compliance with regulations and generally accepted engineering practices.
  • Performed detailed electrical and mechanical calculations including drawings with technical specifications and construction standards.
  • Performed integration and testing of multiple components into a standard military aerospace product.
  • Operated computer-assisted engineering and design software to perform engineering calculation tasks.
  • Designed several phase control pulse-width modulation circuits.
  • Coordinate multiple project schedules and budgets simultaneously.
  • Supported other engineering units in completing tasks and action items to ensure production is on budget and schedule.
  • Design products with wireless technologies spanning Cellular, GPS, Wi-Fi, 802.11n/ac, NFC/HF-RFID and Bluetooth.
  • Redesigned firmware (PIC), fixed electrical problems, completed and shipped on schedule.
  • Carried out test bench development and system simulation for TMC data path ASIC.
  • Power regulation and noise suppression were key factors in these designs.
  • Planned construction schedules, timelines and project organizational charts.
  • Provide input to A/E firm for the development of the Functional Requirements Specification for the new digital Recirculation Flow Control System.
  • Perform calculations, including voltage drop, load summary, short circuit, lighting photometric, and prepared specifications.
  • Utilized equipment like DMM, signal generator, logic analyzer, oscilloscope and multimeter during designing of hardware.
  • Review and approve procedures which direct Factory Acceptance Testing of Variable Frequency Drives and Recirculation Flow Control System.
  • Used Pro E to design and calculate sound suppression panels, electrical wiring harness schematics and routings.
  • Note: My Beechcraft photographed the Gulf Oil Spill for television.
  • Modulated, did simulation and analyzed the circuit using Simulink.
  • Proposed electrical portions of multi- C. Hearn million dollar programs.

Show More

22. High Voltage

average Demand
Here's how High Voltage is used in Electrical Design Engineer jobs:
  • Design automated/semi-automated high voltage, high current, and high power test systems based on specifications and requirements.
  • Perform high voltage electrostatic field simulation using ELECTRO 2 dimensional finite element analysis based software package.
  • Designed high voltage differential power amplifier, current control, and temperature regulating circuits.
  • Performed electromagnetic design of high voltage electrical motors using IEC 60034, VDE, and Siemens internal design standards.
  • Worked on Electrical Low and High voltage Power Control, Conduit Racks, Cable Trays, and Seismic Restraints.
  • Utilized (20 KVA) high Voltage design, with servo control, stepper motors and sensor interface.
  • Designed, laid out, and tested high voltage analog circuits in for DNA sequencing.
  • Worked on the High Voltage Revenue Metering project for TXU Electric as design engineer.
  • Used AutoCAD Electrical to provide high voltage power schematics for the city of Boston.
  • Designed High Voltage shunt regulators, ranging from +/- 200 to 1100 Volts.
  • Designed High Voltage boards that consist of open loop and closed loop gains.
  • Perform high voltage/current critical tests such as short circuit on the systems.
  • Work with vacuum and high voltage (150KV) systems.

Show More

23. System Design

average Demand
Here's how System Design is used in Electrical Design Engineer jobs:
  • Certify new or retrofitted design due to design improvements or obsolescence to ensure system designs meet operational and functional requirements.
  • Tested and validated to ensure system designs meet operational and functional requirements.
  • Validated system designs to ensure they met operational and functional requirements.
  • Executed and maintained control system designs
  • Logged many hours in the field obtaining existing site conditions and system designs, as well as construction coordination.
  • Work on system Spec as well as subsystem design and setup; assist in system evaluation and troubleshooting.
  • Prepared and reviewed basic power system design for underground, cable tray, and grounding systems.
  • Validate electrical installation system design through CPPD, FMEA and applicable tools to ensure product quality.
  • Implemented electrical system design in SKM to determine short circuit ratings for the entire project.
  • Prepared power and lighting control system design to meet State of Louisiana Electrical Code.
  • Applied SCADA system design to validate and verify Control Design and test Controls design.
  • Perform electrical Calculations and System Designs for custom built battery charge discharge systems.
  • Served as Lead Design Engineer for Loose Parts Monitoring System design modification upgrades.
  • Prepared Riser Diagram for Fire alarm and Public Address system design.
  • Work with software engineers to implement system designs.
  • Fire alarm system design and layout.
  • Modeled Electrical System using SEE system design software within stipulated timeframe.
  • CONTRACT) Facilities engineering of power, control and instrumentation system design for nuclear reactor and stored spent fuel facilities.
  • Created 3D routed harness data file utilizing Creo 2.0 (Pro/Engineer) Cabling and Routed System Designer (RSD).
  • Control system design of lowfloor bus including: Design /O modules.

Show More

24. Project Management

average Demand
Here's how Project Management is used in Electrical Design Engineer jobs:
  • Developed Electrical/ Instrumentation construction processes for infrastructure project development, in accordance with project management procedures.
  • Attend meetings to coordinate schedules and upcoming planned activities associated with project management.
  • Interfaced with engineering and project management personnel.
  • Mentored and trained newly hired engineers on design guidelines and project management to keep pace with aggressive release schedules.
  • Provide technical engineering support and project management for the design, engineering, and development of Transformers.
  • Worked as a team to develop and deliver training sessions on Project Management and Commitment Management tools.
  • Proved technical support, project management, personnel resource coordination, compliance oversight, and training/mentoring.
  • Maintain bills of materials and documentation of harness designs and components to support project management.
  • Demonstrated solid leadership, strategic planning, project management, and team building expertise.
  • Performed project management function for the execution of small and mid-size capital projects.
  • Involved in the design and project management of swimming pool control systems.
  • Project Management - Develop project budgets for labor and materials.
  • Project management directing team of drafters and workshop technicians.
  • Establish, contribute and strengthen project management system.
  • Project Management, Sales and Customers.
  • Provided electrical engineering project design, project management and drafting assistance to this regionalelectrical engineering consulting firm.
  • Design and maintain Salesforce custom project management system.
  • Prepared documents on project management, workflow, design packages, and engineering calculation.
  • Included in Worley Parsons Project Management Workshop (Certificate Achieved).

Show More

25. Line Diagrams

average Demand
Here's how Line Diagrams is used in Electrical Design Engineer jobs:
  • Provided single line diagrams, transmission line grid maps, load studies, and outage reports in the summary.
  • Developed, modified and maintained One-line Diagrams, As-build Plans, Elevation Diagrams, Wiring and Cable routing Diagrams.
  • Develop power and lighting layouts, single-line diagrams, grounding layouts, conduit and raceway layouts.
  • Design electrical site plans, electrical power plans, electrical lighting plans and one-line diagrams.
  • Prepared single line diagrams, three line diagrams, and protection system one-line diagram.
  • Developed single-line diagrams, schematic, internal and external diagrams, block diagrams.
  • Do Single Line Diagrams of all circuits attached/installed to the poles.
  • Created Single Line Diagrams of industrial power plants in ETAP.
  • Single Line Diagrams and Electrical Lighting and Power layouts preparation.
  • Implement proper AIC ratings of equipment Prepare one-line diagrams.
  • Prepared electrical schematics based on One line diagrams.
  • Created three line diagrams for AC/DC schematic diagrams.
  • Design of single line, three line diagrams for 345kV, 115kV substations.
  • Updated single line diagrams, both 4160V and 480V.
  • Developed one line diagrams, relay logics, interconnection diagram, cable schedule, cable sizing, control schemes etc.
  • Sized equipment including panel boards, circuit breakers wires and conduits, switchgear, and transformers to create one-line diagrams.
  • Designed Lighting, Fire alarm, Telecom, Power distribution and one-line diagrams.
  • Designed single line diagrams of HT and LT Panels for Believers Church Hospital, Thiruvalla, Kerala.
  • Developed "Electrical Safety One Line Diagrams"
  • Design of electrical system schematics and line diagrams in Mentor Graphics Vesys, ElecWorks, and Microsoft Visio.

Show More

26. Hvac

average Demand
Here's how Hvac is used in Electrical Design Engineer jobs:
  • Developed the design for plumbing, HVAC, process piping (industrial of institutional), electrical power and lighting designs.
  • Focused on electrical design engineering projects for power plant controls, building lighting, HVAC, and power distribution projects.
  • Guaranteed the integration of solutions and products between all engineering departments, including Electrical, HVAC, and Hydraulic.
  • Coordinate new work with existing conditions and other disciplines including HVAC, plumbing, mechanical, civil and structural.
  • Provide electrical engineering and design services for HVAC, lighting, power, instrumentation, and process controls applications.
  • Designed the entire MEP / HVAC system for a 22-room Champlain College dorm in under a week.
  • Worked to meet aggressive cost target of approximately $600 per unit for the competitive HVAC market.
  • Designed and implemented software for HVAC and electrical safety products to UL and NEC standards.
  • Read, Comprehend and utilize HVAC system schematics to develop and validate wire harness designs.
  • Identify and resolve equipment and systems issues associated with HVAC.
  • Power, lighting, fire alarm and HVAC design.
  • Provide power to HVAC units per tenant improvement.
  • Designed control systems for commercial HVAC units.
  • Design of HVAC control digrams.
  • Designed a 35,000 cfm HVAC system for a two-story, 300,000 sq.
  • Designed 2012 pre-development Honda Pilot HVAC control module (9S12XE uP, full-bridge motor controls, CAN).

Show More

27. I/O

average Demand
Here's how I/O is used in Electrical Design Engineer jobs:
  • Identify DCS I/O location in FTA's card and Modules utilizing Process and Safety Manager System for LOPA Projects.
  • Verified existing I/O Elementary diagrams using A/B PLC code.
  • Developed power supplies and I/O controllers.
  • Worked on Bus based system design (serial I/O, PCI BUS, Narrow and Wide SCSI BUS).
  • Prepare PLC I/O tag lists and data sheets.
  • Designed project database in Microsoft Access to include the I/O to be entered into the Programmable Logic Controller (PLC).
  • Worked with Exceed, VI editor and data I/O Unisite.
  • Created PLC I/O layouts and enclosure layouts using Microsoft Visio.

Show More

28. Avionics

average Demand
Here's how Avionics is used in Electrical Design Engineer jobs:
  • Performed 3D solid modeling and surfacing of various electrical/avionics equipment, interfaces and clearances.
  • Develop and design Electrical/Avionics schematic/diagrams for new Chinook Modifications.
  • Integrate avionics installations into existing aircraft.
  • Researched and interpreted conceptual data for which design(s) of Special Missions' avionics equipment would be based upon.
  • Provide engineering support for outfitting of older aircraft with Avionics upgrades, refurbished interiors and individual system upgrades via STC revisions.
  • Design and maintain wire bundles for all cabin systems: IFE Systems, Passenger Service Systems, and Avionics.
  • Develop and Design Avionics power supplies, including TSO, DO-160 test responsibility, production support, procurement works.
  • Reviewed and interpreted vendor drawings & data for avionics and engine control equipment.
  • Redesigned Wiring for new (updated) Avionics and created cable drawing.
  • Assisted airlines in diagnosing Electrical, Systems and Avionics issues.
  • Supported Avionics Gateway requirements definition for the 777X program.
  • Lead engineer: USCG HC-130H A1U Avionics Upgrade.
  • Collected and analyzed flight test data to perform acoustic analysis on avionics LRUs and engine instrumentation.
  • Integrated electrical/avionics' components into airframe structures and propulsion equipment, and armament.
  • Designed over 60 cable harnesses for the SLS rocket avionics suite for both pre-flight avionics testing and production flight.
  • Contract position) Avionics and electrical wiring design and interface for cabin IFE systems.
  • Designed and configured Avionics Wiring from the under dash to the empennage.
  • Designed and Integrated S-Tec / Cobham Avionics Suite into Navy Bell TH-57D Helicopter.

Show More

29. Circuit Design

average Demand
Here's how Circuit Design is used in Electrical Design Engineer jobs:
  • Project responsibilities include working with marketing for product performance definition followed by circuit design and testing.
  • Implement circuit design schematic and instruct/supervise layout of electrical sensor modules.
  • Implemented digital circuit design using discrete and programmable logic devices.
  • Designed and tested new analog integrated circuit design prototypes.
  • Simulated/tested circuit designs using PSPICE.
  • Designed and developed electronics for next generation matrix switch, including digital, analog, and low level power circuit design.
  • Circuit design, PCB Design and programmed the Valve test board, battery charging and discharging boards.
  • Assisted in the specification definition and review of circuit designs and PCB layout of tool control electronics.
  • Performed circuit design using Mentor Graphics DxDesigner, printed wire board layout using Mentor Graphics Expedition.
  • Applied circuit design theory, simulation (PSPICE), and troubleshooting on multiple projects.
  • Created new tools/scripts to reduce time required for circuit design and analysis.
  • Appropriate circuit design and filtering was key to passing industry EMC tests.
  • Circuit design, PCB layout and testing of several electronic circuit boards.
  • Created web pages and programs for circuit design engineers to use.
  • Created logic, power, circuit design for lighting array.
  • Assist in circuit design for controllers for power electronic subsystems.
  • Utilized Six Sigma principles during circuit design effort.
  • Conduced electronic circuit design/evaluation, enclosure design, standards compliance and test for an electro-optic current transducer.
  • Lead design engineer/Architect who designed the first Thin Client designed by HP Performed digital and analog circuit design and analysis.
  • Circuit design using Cadence Opus and Intel Hardware Descriptive Language Troubleshot and evaluated weekly revisions.

Show More

30. Catia

low Demand
Here's how Catia is used in Electrical Design Engineer jobs:
  • Design electrical harnesses for the manufacturing of fire and refuse vehicles using CATIA V-4 and V5 (2D and 3D).
  • Design tool skills continue with CATIA V5 3D harness design and 2D drawing creation.
  • Modeled and drafted the electrical routing using CATIA V5, 3D modeling software.
  • Combine technology with creativity to create and develop 3D models using CATIA.
  • Design cable routing, using Pro/Cabling Wildfire4.0 and CATIA/V5 Electrical WHX tools.
  • Manipulated models in CATIA V4.
  • Integrate 3D (EWIS) design wiring system using ENOVIA and CATIA V5.
  • Developed comprehensive 3D CATIA datasets of truck cab and chassis for routing wire bundles, employing CATIA piping and spline functions.
  • Used Capital Logic Software for drawing system wiring diagram and use Catia mechanical software for system parts location.
  • Routed harnesses and designed mounting brackets and other sheet metal components using Catia V5 3D CAD software.
  • Use of Catia software to create wire harness drawings and small brackets as needed for designs.
  • Used 3D Catia for digital mock-up to integrate and verify design criteria were met.
  • Coordinate technical tasks and develop, change and modify CATIA V5 MBDs.
  • Create brackets for harness packaging in Catia V5 using Sheet Metal Workbench.
  • Created some harness using the tubing function in Catia V4.
  • Work exclusively in CATIA V5 and Enovia.
  • Design and create 3D wire harness routing using Catia E3D software (CATIA V4).
  • Handled the Chrysler responsibilities in writing change notices and working in Catia V4 and Catia V5 or Computer Aide Design.
  • Design and release of formboard drawings using Catia E2D tools (CATIA V4).
  • Design Electrical Wire harness routing inside aircrafts seats using Catia V5.

Show More

31. HMI

low Demand
Here's how HMI is used in Electrical Design Engineer jobs:
  • Review and verify customer specifications, Schematics, Cable drawings and Electrical Components to design CNC Machines and HMI's.
  • Designed electrical panels, HMI & PLC programming for ovens, buffers, conveyors, oxidizers, etc.
  • Designed automation panels, PLC code and HMI interfaces for industrial gas turbine and power generation systems.
  • Designed, documented and built EMO control box test fixture with Siemens S7-1200 PLC and HMI.
  • Design and generate control programs using PLC and HMI software for manufacturing and industrial projects.
  • Modify Mitsubishi PLC and HMI programs using MELSEC GX Developer and GT Works software.
  • Possessed detailed technical knowledge of writing control system code (PLC and HMI).
  • Trained team members on PLC programming and the use of developed HMI screen.
  • Design and installation of the Allen Bradley PLC and HMI programs.
  • Installed HMI Interfaces for machine line operators.
  • Simulate station functionalities through HMI simulation software.
  • Write Ladder Logic code using RSLogix 5000 and FactoryTalk View software (HMI).
  • Detailed design of process system included PLC/PAC controls and operator interface terminals, HMIs.
  • Created software programs for Thermotron's proprietary controller/HMI.
  • Write, maintain and troubleshoot VB.Net HMI.
  • Programmed both several PLC's and HMI's (i.e.
  • Designed HMI graphics using PanelBuilder32, RSView32, IFIX Intellution, TCP, and Wonderware.
  • Circuit design & protection, PLCs, HMIs, digital displays.

Show More

32. Control Panels

low Demand
Here's how Control Panels is used in Electrical Design Engineer jobs:
  • Provided the necessary detail drawings for various equipment installations including control panels, power and instrumentation devises.
  • Designed electrical control panels with power calculations and produced detailed system design drawings.
  • Assist in instrumentation and control drawings in order to provide loop power, for instruments and control panels, including PLC.
  • Created designs and documentation of large process control panels and systems for large civic projects for the water treatment industry.
  • Designed remote I/O control panels, copper cabling and a new air blown fiber optic backbone cabling infrastructure.
  • Constructed, tested, and trouble shot control panels that are used to run mechanical and hydraulic systems.
  • Work included: Designed shaft hoist and winch electrical controls, PLC control panels and wiring diagrams.
  • Design of industrial control panels based on UL508A, IEC and NEC standards meeting high SCCR.
  • Design and assembly of electrical control panels for industrial automation that employ Allen Bradley PLC controllers.
  • Power calculation for Control panels, fuse block, motors, overload protection, and disconnect.
  • Design of electrical control panels including BOM, start-up equipment, safety interlocks and isolation.
  • Build smaller control panels in-house using the wiring diagrams created for each project.
  • Developed Wiring Diagrams, Cable/harness assemblies, Electrical Control Panels and Switch Panels.
  • Selected all parts for machines and outlined control panels and all wiring.
  • Developed interface wiring diagram between Control panels and various skids.
  • Design, manufacturing and installation of control panels.
  • Designed MCP's (Motor control panels).
  • Designed new control panels to centralize equipment control.
  • Performed calc., and material specifications for MCC's, control panels, ABB, DCS, and associated equipment.
  • Developed touch interface for control panels on Fellowes shredders using capacitance touch solutions on both Cypress and Microchip microcontrollers.

Show More

33. R

low Demand
Here's how R is used in Electrical Design Engineer jobs:
  • Modified existing surgical table /patient transport power supply.
  • Researched and developed business plan for industry evaluation with low budget by doing research of systems used in industries
  • Maintained product structure for production design to development of tubing or piping to make sure of the interference.
  • Designed test equipment intended to find bugs in software/ hardware of a radio's microprocessor board.
  • Design circuits and make up schematics and wiring diagrams for the fabrication of electrical panels.
  • Mixed Signal, CMOS, BICMOS, Straight Digital and Custom Analog Layout experience.
  • Entered project in last phase with the system working electrically and no firmware completed.
  • Used the concept of WLAN launcher for communicating between the components and used repeaters.
  • Reason for Leaving: End of contract project, no further work available.
  • Trained and qualified new department personnel to meet or exceed project deadlines.
  • Solved design problem which was causing a significant reduction in sales.
  • Designed macros for different programs in support of LEAN engineering initiative.
  • Interacted with various customers and engineers in Allentown, P.A.
  • Designed automated test system to evaluate mobile radio RF performance.
  • Improved adjustment speed by 90% over modeled process.
  • Reason for Leaving: Accept position at WorleyParsons.
  • Reason for Leaving: Reduction in force layoff
  • Resolve technical issues with suppliers.
  • Designed cost effective sensors for detecting rainwater and monitor water storage levels with LCD display Designed the circuit with Circuit Maker.
  • Distributed assignments for a 9 person team, in charge of verifying completed assignments before being released to the mask shop.

Show More

34. Design Reviews

low Demand
Here's how Design Reviews is used in Electrical Design Engineer jobs:
  • Facilitate design reviews with key stakeholders including Design Engineering, Systems Engineering, and Manufacturing.
  • Participate in technical meetings with customers and conduct internal and customer design reviews.
  • Attended sales and design reviews to ensure accurate electrical design installations.
  • Participated in daily design reviews prior to release for manufacturing.
  • Participate in engineering and general design reviews as required.
  • Prepared and conducted Preliminary and Critical Design Reviews.
  • Support of design reviews, the Tollgate process, Supplier meetings, Sales Tools plus Cost and Reliability Initiatives.
  • Attend design reviews and prepare presentations to audiences such as other functional teams and executive management.
  • Facilitated design reviews with key stake holders, including design engineering, production, and manufacturing.
  • Lead design reviews on instrumentation amplifiers, filters, testing systems and printed circuit boards.
  • Attend design reviews for the electrical diagrams to ensure that they meet customer requirements.
  • Managed component life cycle, evaluated replacement parts, and led circuit design reviews.
  • Led engineers and drafters on all design reviews and customer's requirements.
  • Participated in team design reviews to ensure design goals were met.
  • Support design reviews for annual model change and new product development.
  • Participated with Engineering group in weekly design reviews.
  • Analyzed results and performed design reviews.
  • Participated in Software / Hardware Design Reviews Circuit Board Design and Troubleshooting
  • Created documentations like design validation results for concept and design reviews, .
  • Performed Design Reviews and Pre-Acceptance Testing for several sites in Kazakhstan including Temir Baba and Tazhen Border Crossings.

Show More

35. Nfpa

low Demand
Here's how Nfpa is used in Electrical Design Engineer jobs:
  • Reviewed product according to NFPA, UBC, and other appropriate fire safety regulations.
  • Implement new designs using standard safety standards including UL, CE, and NFPA.
  • Design fire alarm schematics following NFPA Uniform Fire Code and International Building Code.
  • Power distribution and control systems layout and wiring design with NEC/NFPA guidelines.
  • Redesigned system interconnects to meet specifications of NFPA79 and SEMI standards.
  • Qualified for NFPA 70E Safety Standard - Safety in the Workplace
  • Attended NFPA seminars and secured NFPA membership;
  • Design the system to meet or exceed NEC, UL 508A, RIA safety standards, and NFPA 79.
  • Follow NEC, IEEC, NFPA codes.
  • Prepare control designs in accordance with NEC (NFPA) codes and CE safety requirements.
  • Included fire alarm system design per NFPA.Special skills: designed electrical requirements for Wal-Mart Market Centers and Supercenters.

Show More

36. Customer Requirements

low Demand
Here's how Customer Requirements is used in Electrical Design Engineer jobs:
  • Prepared specifications of electrical systems and topographical maps to ensure that installation and operations conformed to standards and customer requirements.
  • Direct activities to ensure that manufacturing, installation, and operational testing conform to functional specifications and customer requirements.
  • Designed and developed new products while modifying and improving existing products within budgetary constraints and customer requirements.
  • Conducted market surveys and visited vendor sites to evaluate/select key components necessary to satisfy customer requirements.
  • Prepared design drawings, specifications and customer requirements for newly engineered components and processes.
  • Provided power distribution and interconnect wiring diagrams, based on customer requirements.
  • Design engineering and adaptation of existing products to meet customer requirements.
  • Communicated with controls engineers to determine customer requirements and safety issues.
  • Invented solutions to significantly quiet the drive and satisfy customer requirements.
  • Demonstrated system meets initial customer requirements to win award contract.
  • Monitored installation and operations to consistently meet rigorous customer requirements.
  • Design from bid specifications or customer requirements.
  • Designed and tested point of sale software and hardware applications to meet internal and customer requirements and improve product acceptance.
  • Review customer requirements and customize industrial HVAC equipment designs to meet those requirements while conforming to NEC and UL requirements.
  • Developed, designed and provided costing of several lines of standard products based on customer requirements and industry standards.
  • Collaborated with DVP&R (Design Verification Process & Report) team to validate customer requirements.
  • Design met all national and local codes as well as customer requirements.
  • Designed and modified edge lit panels to meet customer requirements.
  • Coordinate with internal/external business partners to satisfy production/customer requirements.
  • Integrated Avionics upgrades to Proline 21 Avionics on Challenger 605s according to customer requirements

Show More

37. PCS

low Demand
Here's how PCS is used in Electrical Design Engineer jobs:
  • Designed Control Panels containing Siemens PCS7 PLC's with the ET-200 I/O modules.

Show More

38. MCC

low Demand
Here's how MCC is used in Electrical Design Engineer jobs:
  • Utilize knowledge of 480V-600V MCC cubicle design in creating the design and analyzing electrical load and 120V control circuit.
  • Worked as the in-house engineer and headed the preparation of MCC cubicle replacement and engineering change at the station.
  • Project Design Engineer responsible for power distribution and controls for renovation of process packaging plant at McCormick Foods.
  • Designed a conduit routing from the auxiliary building MCC to the new MCC, selecting the cable accordingly.
  • Revised electrical drawings for 480V MCC loads to support engineering changes.
  • Reviewed all TCP, GCP, GPP, FPP and MCC interconnect wiring diagrams.
  • Update the one line diagram & layout in a new MCC building.
  • Update the specification for the new MCC, MCC building.
  • Estimate electrical construction cost using estimation software as McCormick and Accubid.
  • Prepare equipment layout in the substation/MCC building including cable bus from transformer to MCC/Swgr layout and cable tray layouts.
  • Executed witness testing on all major electrical equipment which includes: Switchgear, MCC, and Transformers.
  • Scheduled and developed 480V switchgears and motor control centers (MCC) schedules.
  • Utilized McCormick Estimating programs as well as AccuBid and Autodesk platforms.
  • Designed Switch Gears, MCCs, Bus Ducts, reviewed specs for transformers, breakers, fuses, cables.
  • Reviewed technical documents of MCC, switchrack and schematic for control circuit of desalter from suppliers.

Show More

39. EMI

low Demand
Here's how EMI is used in Electrical Design Engineer jobs:
  • Project Management experience in Pipeline/ Petrochemical and Electrical Substation engineering environment.
  • Create PLC programs for; Atmospheric Pressure Chemical Vapor Deposition (APCVD) furnaces, Conveyor and Indexing Furnaces.
  • Created electrical substantiation reports for project worked on, electrical load analysis, ground testing and EMI /RFI testing.
  • Initial experiment was a success; I then developed testing procedures to characterize electron and ion emission.
  • Design of oil storage, medium voltage pipelines pump stations, Biotechnology and Chemical facilities.
  • Have worked with other disciplines such as Architects, Civil/Structural engineers, Mechanical, Chemical.
  • Developed training and served as the Project Lead for the Semi-Annual Naval Reactors Trainee Orientation.
  • Designed EMI filtering output ripple reduction & input in accordance to meet MIL-STD-461E.
  • Lowed down the EMI emissions by spreading the switching frequency of L6562A.
  • Power distribution systems for petrochemical plants in Northern Alberta, Canada.
  • Verified the harmonic content and EMI performance compared to EU standards.
  • Performed Thermal, Vibration, and EMI testing for the C130 Real Time Information in the Cockpit (RTIC).
  • Reduced 15dB EMI emissions to meet the standard IEC CISPR15 and EU standard EN 61547.
  • Developed a plastic cased electric vehicle battery system utilizing zinc-air chemistry for a prototype electric vehicle in this startup company.
  • Gained academic experience with vb.net and project management.
  • Completed electrical designs for water purifiers, chlorinators, and chemical automation for the industrial, construction, and resort/hotel industries.
  • Overhauled the electrical system and attachments for use in all D6T bulldozers Updated machine for Tier 4 emissions system
  • Resolved issue with excessive noise emission on DPG stack that prevented photolithography tool from printing effectively.
  • Manage entire custom design (electrical and electro-mechanical) for full and semi-auto VCS.
  • Design packages involved "EMI" Shielded protection implementing to computer rooms.

Show More

40. Load Calculations

low Demand
Here's how Load Calculations is used in Electrical Design Engineer jobs:
  • Hold responsibility for requirements gathering, designing electrical systems, load calculations, equipment selection, project management and coordination.
  • Performed load calculations, structural analysis, and calculations on residential and commercial building projects.
  • Developed the engineering construction documents including the load calculations and estimated the load growth projections.
  • Provide electrical design calculation load calculations, voltage drop and short circuit calculation.
  • Completed riser diagrams and load calculations on residential and commercial projects.
  • Perform Load Calculations for commercial and industrial facilities.
  • Perform Load Calculations for refinery and petrochemicals facilities.
  • Project design includes providing load calculations, state energy compliance certificates, equipment and lighting specifications, and CAD documents.
  • Performed short circuit, voltage drop, and electrical load calculations per the National Electrical Code.
  • Prepare Title-24 and specify all light fixtures for all projects Prepare Load Calculations and Panel schedules.
  • Delivered panel schedule load calculations for lighting and power circuits per NEC and BOCA requirements.
  • Perform Service Load calculations, Service Feeder size, Service entrance panel size and one-lines.
  • Load calculations, Feeder Sizing, Branch circuit sizing based on NEC.
  • Provide single line diagram including load calculations for existing and new additions.
  • Conduct load calculations for electrical and mechanical HVAC systems.
  • Provided load calculations for third party equipment.
  • Develop panel schedules & load calculations.
  • Load calculations in panel board schedules.
  • Perform Load calculations to select appropriate Circuit Protectors and contactors in designing Motor Control Cabinets.
  • Job functions and Responsibilities under the supervision of the Chief Electrical Engineer Perform electrical load calculations.

Show More

41. Design Changes

low Demand
Here's how Design Changes is used in Electrical Design Engineer jobs:
  • Communicated effectively with the other engineering teams and collaborate with production about design changes and new developments
  • Provided engineering design disposition on discrepancies, Prepared documentation and incorporates design changes.
  • Provided manufacturing support and document design changes.
  • Tracked and prepared design changes to document in site condition to provide support to construction and start-up personnel.
  • Developed design changes to replace fast acting fuses with fuses that were rated for higher amperage protection.
  • Coordinate design changes for existing stations as per product requirements Validate test stations using software and hardware.
  • Coordinated design changes with Stress, Materials & Processes, Manufacturing Engineering, and Data Verification.
  • Incorporate all new electrical design changes into the production unit and aid manufacturing in building tools.
  • Addressed deficiencies, reviewed field design changes and issued record drawings at the project close-out.
  • Initiated design changes which improved process, product performance, quality, and decreased costs.
  • Work with Mechanical Engineers for design changes to improve functionality of controlled systems.
  • Worked with regulatory bodies to resolve issues with design changes and regulations.
  • Checked systems in field and prepared design changes using CAD.
  • Lead engineering design changes for cost saving solutions.
  • Recognized and communicated scope and design changes promptly.
  • Tested hardware design changes per FAA requirements.
  • Lead Field Engineer for Electrical Design Changes for Building 707 Performed Engineering Operability Evaluations for Facility Safety Systems.
  • Construct and supervise construction of engineering models and prototypes products Evaluate design changes, specifications and drawing releases.

Show More

42. IEC

low Demand
Here's how IEC is used in Electrical Design Engineer jobs:
  • Ensured compliance with safety requirements and code standard procedures of NEC, ASHRAE, IBC, IECC.
  • Evaluate equipment through testing to the required standards and specifications (IEC, CSA, CE).
  • Performed Risk Management Analysis Study for Lightning Protection Systems for airport buildings based on IEC standards.
  • Power distribution and electrical protection standards according to API, NEC, IEC, IEEE.
  • Tested products for Ground leakage/Impedance, EMC, ESD to comply with UL/CSA/IEC regulations.
  • Incorporate ISO, IEC and Australian MDG regulations in optimal product development.
  • Produced mechanical concepts, piece parts, and drawings of new products.
  • Performed power and lighting calculations as per the IEC specs and requirements.
  • Designed Network Topology for providing reliable IEC61850 network.
  • Invented one-piece mounting design for EMP service loops, reducing installation time by 8 hours/unit using Intergraph 3D & Man-Man.
  • Developed simulation models for testing IEC61850 MMS communication on IEDs (Intelligent Electronic Devices).

Show More

43. Cost Estimates

low Demand
Here's how Cost Estimates is used in Electrical Design Engineer jobs:
  • Assisted Sales efforts by performing specification reviews and providing Engineering cost estimates and technical input on proposals.
  • Performed conceptual and detailed cost estimates for clients budgeting or contractors construction proposals review and awarding.
  • Analyzed completed construction drawings and cost estimates for accuracy and conformity to standards and regulations.
  • Prepared modification request packages including equipment, cost estimates and scope design.
  • Prepared Electrical Power projects materials & cost estimates for budget preparation.
  • Conducted both design research and labor/material cost estimates for budgetary purposes.
  • Prepare technical specifications, electrical cost estimates and feasibility studies.
  • Provide concepts and preliminary cost estimates.
  • Assist in the preparation of cost estimates, specifications, evaluations, and material requisitions.
  • Design included pump motor control, area lighting, system grounding, and cost estimates.
  • Produced contract drawings, cost estimates, and technical specifications for aviation projects.
  • Review, justify, and prepare contract change orders and construction cost estimates.
  • Prepared man hour and cost estimates for potential projects.
  • Assisted with design and final design bid cost estimates.
  • Cost estimates for quotation purposes based on their design.
  • Developed various cost estimates to support project budgets.
  • Travel to different sites for field evaluations, meetings and complete design drawings * Complete cost estimates for each job.

Show More

44. Ieee

low Demand
Here's how Ieee is used in Electrical Design Engineer jobs:
  • Modified existing procedures to update production methods, ensuring compliance with new regulatory specifications including IEEE, NEMA and API.
  • Evaluated design for conformance with NEC, IEEE, DOE Codes/Standards/Orders and other Site Standards.
  • Served as Corporate representative on various standards committees (NEMA, IEEE & ISA).
  • Lead Process Unit Electrical Design Engineer II for Areva Design with NRC and IEEE regulations and requirements.

Show More

45. Orcad

low Demand
Here's how Orcad is used in Electrical Design Engineer jobs:
  • Designed electronic hardware using (EDA/ECAD) schematic capture and PCB layout software such as Cadence-OrCAD Capture & PCB 16.6.
  • Designed printed circuit boards for prototype sun sensor and photo detectors using ORCAD schematic capture and board layout software.
  • Utilize engineering design tools (Pro/E, AutoCAD, OrCAD) to bring devised solutions to fruition.
  • Used OrCAD 16.5 in electrical circuit analysis, simulation and design.
  • Implemented schematic drawings for the circuit board, using OrCad Capture.
  • Designed circuits, schematics & board layouts using Cadence OrCAD/Allegro.
  • Captured and cleaned schematics using OrCAD.
  • Ensured successful development stage in design by creating rigorous simulation and analysis, verification process using OrCad, Microstation.
  • Generate and simulate schematics for new electronics utilizing OrCAD -Manage and Perform development and qualification testing
  • Developed BOM Comparison Tool currently being utilized throughout Brooks CAD team for comparison between ORCAD, Altium and Oracle Agile.
  • Utilize Orcad to design and simulate electrical circuits (low pass filters, control feedback circuits, etc).
  • Generated Board level schematic captures (Cadence / Orcad and ViewLogic / DxDesigner).
  • Used Cadence Orcad for schematic capture for printed circuit board design input.
  • Performed power/thermal, trade studies, stress, compliance and Orcad Pspice analyses.
  • Design and implement electrical board with Altium Designer, Cadsoft Eagle, PSpice, OrCAD and Cadence Design System.
  • Start Up) Designed RF-ID contactless system using Pspice Orcad to create the circuit used for the digital exchange of data.

Show More

46. USB

low Demand
Here's how USB is used in Electrical Design Engineer jobs:
  • Worked on network and data bus systems utilizing TCP/IP protocol, USB interface, ARINC 429 and RS-485/232 serial communications.
  • Designed cables to interface with RS-232, RS-422, and USB connections between central processing system and various sub-systems.
  • Implemented USB based design, thereby eliminating more than 35% transmission power requirement.
  • Utilized National Instruments LabVIEW software and National Instruments USB-6008 data acquisition board.
  • Gained considerable USB hardware, firmware, and driver design experience.
  • Developed software for USB enabled Ground Support Equipment for voice and
  • Experience working with I2C, USB and SPI communication protocols.
  • Designed I/O extension board with USB 2.0/SPI communication.
  • Design digital circuits (8051 microcontroller, USB, Ethernet controller, step-down voltage).
  • Lead developer on Ingenico multi-bay charger with USB and Ethernet connectivity.

Show More

47. Installation Drawings

low Demand
Here's how Installation Drawings is used in Electrical Design Engineer jobs:
  • Created and modified electrical installation drawings for aircraft modification and certification.
  • Design AutoCAD schematics and detailed installation drawings using Solid Works.
  • Created electrical installation drawings for post- production aircraft certification.
  • Created installation drawings for electrical harnesses and components.
  • Obtained, interpreted, and analyzed OEM airplane installation drawings and design data using approved processes (Boeing/Airbus) and tools.
  • Created Wiring Diagrams, Wire Harness Assembly Drawings and System Installation Drawings for both existing systems and new installations.
  • Created harness detail and installation drawings including 2D flat harness drawings from the 3D harness data.
  • Created and revised CATIA V4 and V5 Electrical Installation Drawings for A380 aircraft modifications via VPM.
  • Created solid models, cabling, and installation drawings with Pro Engineer Wildfire 2 & 4.
  • Conducted cost estimate from site-clearance & installation drawings and BOM for upgrade.
  • Performed Installation drawings and wiring parts modeling using CATIA V5.
  • Prepared detail, assembly, and installation drawings.
  • Created harness and installation drawings in Pro/E.
  • Create wire harness installation drawings using CATIA.
  • Prepared detailed mechanical assembly and installation drawings of system components utilizing Unigraphics.
  • Create installations, production wire diagrams and wire routing/installation drawings using Pro E Cable & Catia.
  • Developed installation drawings, Schematics, Wiring diagrams, Electrical routings and harness mounting diagrams.
  • Assisted with installation drawings for a new lime kiln, and caustizing area.
  • Used AutoCAD to draft wiring diagrams and wire routings for installation drawings.

Show More

48. MEP

low Demand
Here's how MEP is used in Electrical Design Engineer jobs:
  • Performed MEP code compliance inspections for governmental and quasi-governmental organizations.
  • Coordinate entire MEP disciplines including utilities.
  • Attend meeting with Architect and MEP.
  • Lead group of engineers and draftsmen to model many LOD 300 pilot projects and LOD 400 project from Revit MEP.
  • Utilized AutoCAD and Revit MEP software in the design of systems and to produce construction documents.
  • Design of lighting and power systems, power circuits analysis using MEP Autodesk.
  • Used AutoCAD MEP 2013, Revit MEP 2013 and EasyPower.
  • Design Secondary Power Distribution, Auxiliary and Lighting Systems Layout and Coordination of Devices across Disciplines Coordination of MEP Equipment
  • Use Autocad and Revit MEP software and the National Electrical Code (NEC) for the design.
  • Used AutoCAD, AutoCAD MEP, Revit, SKM Dapper, etap and Visual for many projects

Show More

49. Ethernet

low Demand
Here's how Ethernet is used in Electrical Design Engineer jobs:
  • Advised telecommunication clients how to bring their products such as Broadband Routers/Ethernet switch hub
  • Configured and programmed Ethernet PHY chip in hardware, and software.
  • Designed power supply with integrated 6-port Gigabit Ethernet switch.
  • Supported team in different test activities such as BAC SERVER, DEBUG, CNE, ETHERNET testing.
  • Designed (verilog RTL), simulated and synthesized a 100 Mb/s ethernet management ASIC and ethernet repeater ASIC.

Show More

50. FAA

low Demand
Here's how FAA is used in Electrical Design Engineer jobs:
  • Perform re-inspection of conformity findings with FAA representative.
  • Developed FAA approved parts, assemblies and installation drawing packages using SolidWorks 2005, AutoCAD and various Microsoft Office software.
  • Followed a design process that satisfied DO-254 standards and met FAA and EASA certification requirements.
  • Ensured all FAA and Mil Specs specifications were followed for completion of the airship.
  • Design Wire Harness Installations and Harnesses to meet program and FAA requirements.
  • Accomplished all DER, FAA, and program specs requirements.
  • Program manager to FAA as part of the STC process.
  • Developed ground & flight test plans to support FAA requirements.
  • Tested auxiliary fuel tanks according to FAA regulation.
  • Worked in compliance with FAA standards and regulations.
  • Support Flight Test operation for FAA certification.
  • Designed helipad lighting per FAA requirements.

Show More

20 Most Common Skill for an Electrical Design Engineer

Electrical Systems24.2%
Autocad Electrical8.8%
Electrical Design8.6%
Panel Layouts8.4%
Wire Harnesses5.6%
Control Systems5.2%
CAD4.5%
PLC4.3%

Typical Skill-Sets Required For An Electrical Design Engineer

RankSkillPercentage of ResumesPercentage
1
1
Electrical Systems
Electrical Systems
17.7%
17.7%
2
2
Autocad Electrical
Autocad Electrical
6.5%
6.5%
3
3
Electrical Design
Electrical Design
6.3%
6.3%
4
4
Panel Layouts
Panel Layouts
6.2%
6.2%
5
5
Wire Harnesses
Wire Harnesses
4.1%
4.1%
6
6
Control Systems
Control Systems
3.8%
3.8%
7
7
CAD
CAD
3.3%
3.3%
8
8
PLC
PLC
3.1%
3.1%
9
9
PCB
PCB
2.5%
2.5%
10
10
Analog
Analog
2.3%
2.3%
11
11
Test Procedures
Test Procedures
2.2%
2.2%
12
12
Engineering Support
Engineering Support
2.1%
2.1%
13
13
NEC
NEC
2.1%
2.1%
14
14
Alarm Systems
Alarm Systems
1.9%
1.9%
15
15
Circuit Boards
Circuit Boards
1.9%
1.9%
16
16
BOM
BOM
1.6%
1.6%
17
17
Technical Support
Technical Support
1.5%
1.5%
18
18
Shop Drawings
Shop Drawings
1.3%
1.3%
19
19
Electric Motors
Electric Motors
1.3%
1.3%
20
20
Fpga
Fpga
1.3%
1.3%
21
21
UL
UL
1.3%
1.3%
22
22
High Voltage
High Voltage
1.3%
1.3%
23
23
System Design
System Design
1.2%
1.2%
24
24
Project Management
Project Management
1.2%
1.2%
25
25
Line Diagrams
Line Diagrams
1.2%
1.2%
26
26
Hvac
Hvac
1.1%
1.1%
27
27
I/O
I/O
1.1%
1.1%
28
28
Avionics
Avionics
1.1%
1.1%
29
29
Circuit Design
Circuit Design
1.1%
1.1%
30
30
Catia
Catia
1%
1%
31
31
HMI
HMI
1%
1%
32
32
Control Panels
Control Panels
1%
1%
33
33
R
R
0.9%
0.9%
34
34
Design Reviews
Design Reviews
0.9%
0.9%
35
35
Nfpa
Nfpa
0.9%
0.9%
36
36
Customer Requirements
Customer Requirements
0.9%
0.9%
37
37
PCS
PCS
0.8%
0.8%
38
38
MCC
MCC
0.8%
0.8%
39
39
EMI
EMI
0.8%
0.8%
40
40
Load Calculations
Load Calculations
0.8%
0.8%
41
41
Design Changes
Design Changes
0.8%
0.8%
42
42
IEC
IEC
0.7%
0.7%
43
43
Cost Estimates
Cost Estimates
0.7%
0.7%
44
44
Ieee
Ieee
0.7%
0.7%
45
45
Orcad
Orcad
0.7%
0.7%
46
46
USB
USB
0.7%
0.7%
47
47
Installation Drawings
Installation Drawings
0.6%
0.6%
48
48
MEP
MEP
0.6%
0.6%
49
49
Ethernet
Ethernet
0.6%
0.6%
50
50
FAA
FAA
0.6%
0.6%

26,760 Electrical Design Engineer Jobs

Where do you want to work?