Electrical engineer jobs in Bridgeport, CT

Controls Engineer North Haven, CT (Onsite) Experience in Rockwell Automation Programming Vision System (Cognex / Keyence) Rockwell Motion control IQ/OQ/PQ Validation Medical / pharma domain

We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance-and the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. This is a high-impact, fast-response role supporting programs where performance shortfalls must be diagnosed and corrected on aggressive timelines. You will bridge simulation, measurement, and practical implementation to deliver solutions that work-quickly and reliably. Key Responsibilities: Rapidly assess existing antenna and array designs for performance gaps against requirements. Diagnose and resolve issues related to mutual coupling, beam distortion, impedance mismatch, and bandwidth limitations. Recommend and implement design modifications for immediate performance improvements. Perform accelerated free-space radiation pattern measurements and compare results against simulations. Run high-fidelity EM simulations (HFSS, CST, FEKO, or similar) under compressed schedules for fast validation. Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility. Support urgent production and field troubleshooting, including on-site technical interventions when required. Collaborate with RF systems engineers to ensure antenna performance aligns with system-level budgets and phase stability. Produce clear, actionable evaluation reports for program stakeholders, often under short deadlines. Mentor junior engineers in rapid diagnostic and problem-solving methods. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of antenna design and/or evaluation experience in radar, communications, or EW systems. Expert understanding of antenna theory, EM propagation, polarization, and impedance matching. Proven ability to mitigate mutual coupling in dense or phased-array configurations. Experience delivering high-quality antenna evaluations and solutions under aggressive timelines. Proficiency with EM simulation tools such as HFSS, CST, FEKO, GRASP. Hands-on experience with antenna measurement in both anechoic chambers and open-air ranges. US Citizenship with ability to obtain and maintain a security clearance. Preferred Skills: Experience with low-observable and conformal antenna designs. Familiarity with wideband, multiband, and frequency-agile antenna systems. Exceptional problem-solving and communication skills for high-pressure, time-sensitive projects. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Creighton Manning, a GAI Company, is seeking a Highway Project Engineer to join our team. Are you looking for a collaborative work environment where you can work on exciting and vital transportation projects that transform your community, where each person is valued and work-life balance is key? If so, come join our growing, multidisciplinary team of engineers based in the greater NY Capital Region and Lower Hudson Valley. This is an exceptional opportunity for personal and career growth through exposure to a wide range of design projects, interaction with highly skilled and motivated colleagues, and team-based training. With over 50 years of experience in NY's Capital Region and adjacent areas, our team provides expertise in civil engineering, surveying, and construction inspection- serving public and private clients across 4 main markets: transportation, municipal, land development, and energy. Join a winning team that leads in excellence, having received 12 industry awards for engineering work in the last 5 years and being chosen as an Albany Business Review Best Place to Work and/or Times Union Top Workplace 9 times in the last 10 years! Here's what employees say about working at Creighton Manning: Very solid company…understands the mix of life and work, and does not interfere with that. Mix of young and old within the company…lots of growth potential. Flexible schedules -they care about keeping employees happy, even offering remote work 2 days a week. Highly collaborative work environment, where you will work directly with (and learn from) Project Managers, which doesn't happen at the biggest firms. A lot of projects are once-in-a-career opportunities…many exciting career-defining projects…big bridge replacements and rotaries - projects that have real positive community impact. The Company culture is great, everyone is looking out for each other. Comprehensive, People-Centered Benefits for Total Wellness: Excellent, competitive pay based on experience and qualifications Medical, dental, and vision insurance coverage options Health Savings & Flexible Spending Accounts 401(k) with Employer Match Flexible work schedule including WFH policy (2 days/week) Generous PTO Discretionary annual employee bonus Tuition reimbursement Paid life insurance and long-term disability insurance Employee Assistance Program (EAP) Legal Services Employee Discount Programs Paid professional licensing fees Paid membership fees in professional organizations Perks such as summer BBQ, golf outing, holiday party, and free snacks! About This Position: We are seeking a qualified Project Engineer with 8-15 years' experience to become a part of our growing Highway Design Group for our Albany, Syracuse, and White Plains offices. Our highway engineers work on a variety of projects and interact with traffic engineers, structure engineers and our construction inspection staff. Responsibilities include: Developing roadway, trail and sidewalk designs Intersection design and layout including roundabouts and traffic signals Checking design calculations prepared by others Preparation of construction contract documents Project coordination, report writing and estimating Direct coordination with clients All interested candidates should send in a cover letter and resume to include salary requirements and availability. Engineer IV plans, schedules, conducts or coordinates detailed phases of the engineering work in part of a major project or in total project of a moderate scope. Perform work which involves conventional engineering practice but may include a variety of complex features. Typical projects include long-range transportation planning, traffic impact studies, site planning and design, highway and traffic signal design, transit planning and design, and bridge design. The Engineer IV level often requires efforts outside normal business hours to meet client requests and/or attend meetings. Essential Job Functions: • Perform broader assignments than an Engineer III. • Plan, schedule, conduct or coordinate detailed phases of engineering work in part of a major project. • Plan and conduct work requiring some judgment and independent evaluation. • Apply standard technology and procedures. • Conduct analysis choosing appropriate applications. • Anticipate bigger project objectives • Complete intermediate and limited complex engineering assignments • Perform cost and quantity estimating. • Attend project meetings and presents specific aspects of engineering assignments. • Responsible for report writing for basic projects and some intermediate projects. • Project engineer of basic projects - staffing, scope, schedule, budget. • Assume client relations for routine basic projects. • Provide some delegation and supervision of Engineer III's and Technicians. • Provide coordination for multi-discipline projects (intermediate level). • Receive direction on technical guidance for complex problems. Additional essential functions for an experienced person in this role: • Prepares basic proposals including the scope of work, hours planning and estimate of fees. • Responsible for invoices. • Responsible for tracking project progress relative to budget expenditures. Job Requirements: Bachelor's degree in engineering from an ABET/EAC accredited program or an approved equivalent. Professional Engineering (P.E.) licensure required. 4 years of experience in a similar engineering role required. Proficiency with Microstation, Inroads and AutoTurn. Working knowledge of the NYSDOT Highway Design Manual. Active member of a professional practice organization. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical track towards Project Manager or into various corporate leadership positions. Team members get 360 reviews with input from peers and managers, to get a broad picture of their contributions. Qualifications Education Required Bachelors or better in Engineering or related field. Experience Required Proficiency in MicroStation, Inroads, and AutoTurn 4 years: Experience in a similar role Licenses & Certifications Required Professional Engineer

We are seeking a highly motivated Senior Electrical Engineer with 7 to 10 years of experience in the commercial and industrial construction industry to support a growing list of projects in the New York Metropolitan Area. The ideal candidate will have an in-depth knowledge of power system design and a solid foundation in electrical engineering. • Collaborate with the team to create construction documents and perform reviews to meet tight schedules. • Provide technical design services and ensure compliance with Electrical Code. • Mentor junior engineers and oversee construction activities under the direction of the lead electrical engineer. • Conduct load calculations and prepare electrical design calculations, technical reports, engineering plans, and specifications. • Select electrical equipment, including transformers, switchgear, and circuit breakers. • Manage junior engineers in preparing comprehensive engineering reports and documentation. • Perform engineering design evaluations and lead project-specific engineering design. • Conduct construction oversight and field inspections for quality control. • Collaborate on marketing materials and proposals as needed. Requirements: • Bachelor's degree in Electrical Engineering or an approved equivalent. • 7 to 10 years of relevant experience in electrical engineering, design, QA/QC, and construction oversight. • Comprehensive understanding of the NEC, building codes, and general construction practices. • EIT or PE preferred. • Proficient in Microsoft Office, AutoCAD, Revit, ETAP, SKM, and construction document drafting practices. • Familiarity with Civil 3D Software is a plus. • Must possess a valid NYS Driver's License or a nearby state equivalent. Key Skills: • Proficient in electrical power and lighting software. • Ability to coordinate and collaborate with multiple technical disciplines. • Detail-oriented with strong problem-solving abilities. Benefits: • Medical Insurance • Company-sponsored 401(k) • Paid Time Off (PTO) • Growth potential within a dynamic environment Salary: $125,000.00 - $160,000.00 per year (Depending on experience and qualifications) How to Apply: You can contact the recruiter directly to inquire. Drew Celestino ************ By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from HEPCO, Inc and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, marital status, national origin, age, veteran status, disability, or any other protected class.

Haugland Group, a privately-owned Long Island, New York-based civil infrastructure and energy construction company has an immediate opportunity for an experienced Project Engineer to join our team. We are looking for an experienced, self-motivated, highly organized individual to join the Project Management team to provide all facets of construction project support, including submittal processing, material management, and budget analysis. At Haugland, we understand that pushing the boundaries of what has been done is essential to develop the infrastructure of tomorrow. The journey won't be simple, but what gets us there is. At Haugland Group, Our Word is Our Way. We are leaders in building what's next because we see the path to get there and we're setting a new standard of exceptional along the way. Let's build together! Key Functions Coordinate with the Project Management team on engineering and procedural plans, and suggest project enhancements/value engineering opportunities Prepare and track project submittals Facilitate Change Order process, prepare monthly budget analysis, and projections/cost to complete Manage CPM baseline and updates Manage RFI's and engineering-related inquiries Assist with project purchase orders and subcontracts Ensure all project materials are approved, delivered and tracked accordingly Coordinate with the finance department to prepare, review and evaluate monthly costs Update and maintain the company ERP system with all current project information in the appropriate programs Desired Qualifications 5+ years of relevant experience, ideally in construction management Bachelor's Degree in Construction Management Utility Engineering preferred Experience with ERP management and improvements Proficient in the use of Microsoft Office and standard computer applications Display a high level of initiative, effort, and commitment towards completing assignments in a timely manner Ability to identify problems; determine accuracy and relevance of information; use sound judgment to generate and evaluate alternatives, and make recommendations Effective communication skills, interpersonal and organizational skills, and a strong work ethic Why Haugland? Compensation range for this role is 90-120k At Haugland Group, our benefits are designed to convey company culture and values which has employees at its forefront. Excellent benefits package including medical, prescription drug, dental, vision, Health Savings, short/long term disability, and life insurance 401k with 5% employer match Employer funded Dependent Care FSA Potential for annual performance-based raise Paid Time off Paid company observed holidays Educational and professional advancement opportunities Frequent company-sponsored events Relaxed, friendly office Fast paced, exciting environment Haugland Group LLC and its operating divisions, affiliates, related entities, and subsidiaries (collectively, “the Company”) do not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered property of the Company and therefore, the Company will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Only upon the Company's written request may preferred vendors may be invited to refer talent for specific open positions. In these cases, a fully executed agreement with the Company must be in place and current. We are an Equal Opportunity Employer.

FIELD ELECTRICAL ENGINEER I Summary Design and development of paper converting and automation machinery. Responsible for the design, development, and documentation associated with the project electrical systems. This includes the control system electronics hardware, electro-mechanical interfaces, compliance to machine specifications, and compliance to applicable electrical codes and standards. Must be able to solve machine control problems by applying knowledge of electrical engineering principles to accomplish technical assignments. Essential Duties & Responsibilities Works as a collaborative electrical engineering team member applying electrical engineering principles to develop design solutions for electromechanical machine control. Basic understanding of embedded controllers, embedded software, and PLCs for automated machines. Basic understanding of embedded controllers, embedded software (C, C++ languages). Confirms electrical systems and component's capabilities and quality by designing testing plans. Prepares engineering reports, calculations and checks drawings for completeness and accuracy. Interacts with vendors, suppliers, to select electrical components/subassemblies that comply with machine requirements and specifications. Trouble shooting equipment as required in house and at customer facilities. Develop operation manuals and other pertinent documentation. Responsible for design and concept and layout using Solid works Electrical and AutoCAD. Support prototype builds and releases products into production. Assists with the design, development, testing and reports for new product development (NPD) projects. Participates in design projects, customized products, existing product maintenance, quality improvements and cost reduction. Qualifications Bachelor's degree in Electrical Engineering or Electrical Engineering Technology or Controls/Mechatronics Minimum of 2 years of related electrical engineering experience PLC programming experience is a plus (Mitsubishi, Siemens, Allen-Bradley, Beckhoff, etc.) Software programming is a plus (C, C++, Structured text) PCB layout experience is a plus. Altium software preferred. Working knowledge of electrical systems, electrical troubleshooting, and electrical design Familiarity with design and application of various sensor technologies Familiarity with user interface technology, HMIs such as touch-screen displays Self-motivated and innovative, yet an exceptional product development team player Strong communication and problem solving skills CAD experience is required. Willing to travel up to 40% of the time (international and domestic)

**RWE Clean Energy, LLC** **To start as soon as possible, full time, permanent** **Functional area:** Engineering **Remuneration:** Exempt The **Senior Engineer I, Electrical Project Engineering** , is responsible for overseeing the electrical systems design for onshore wind, solar, and storage projects from development to handover to operations. **Role Responsibilities:** + Design of balance of plant packages from development to IFC + Engineering project support during pre-construction, construction, and turnover to Operations + Grid code compliance and interconnection requirements + Specification and evaluation of major balance of plant electrical equipment + Power system modeling and studies + Coordinating project engineering topics during construction + Management of 3rd party engineering consultants + Coordinating with internal stakeholders and subject matter experts during the project lifecycle + Support NERC Compliance documents and studies + Ensure that the highest level of health, safety, and environmental protection is incorporated into designs and standards + Support the development of electrical engineering standards + Support the development of engineering processes and procedures **Job Requirements and Experiences:** + A Bachelor of Science in Electrical Engineering from an ABET-accredited college engineering program + Advanced degrees can reduce technical experience requirements + Minimum 10 years of professional experience (post undergraduate) in electrical engineering + Specific areas of experience and competency include transmission design, substation design, collection and distribution design, major equipment specification, power system studies, and system protection and control + Experience in renewable generation (wind turbine, solar PV, and BESS storage) project design is preferred + Strong interpersonal skills, with the ability to manage customer relationships + Demonstrated desire to learn about the Company and the renewables space + Excellent proficiency with Microsoft Office (Excel, Word, PowerPoint, Outlook) and Teams + Strong leadership, communication, and ability to meet deadlines + Strong organization skills and ability to coordinate multiple tasks and deliverables + Ability to multitask, while working independently and as part of a team + Motivated self-starter, goal-oriented, and strong problem-solving abilities + Proven ability to empathize, build relationships, and effectively communicate with people from a diverse set of backgrounds + Responds well to direction, is easy to challenge and develop, and is coachable + Is detail-oriented, has strong business acumen, and a sound understanding of business concepts **Work Environment:** This position is an office-based role with some travel and visits to other RWECE offices and field locations. The employee must be able to sit, walk, or stand for long durations of time. _Applicants must be legally authorized to work in the United States. RWE Clean Energy is unable to sponsor or take over sponsorship of employment visas at this time._ **Pay range:** The annual base salary range for this position in California, New York, and Illinois is $145,000 - $180,000. The listed salary range represents our good faith estimate for this position and represents the range for new hire salaries across all U.S locations. Please note that the salary information is a general guideline only. RWE considers factors such as (but not limited to) scope and responsibilities of the position, candidate's education & work experience, training & certifications, and key skills as well as market and business considerations at the time of the offer. **Benefits offered:** Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. Eligible employees also participate in short-term incentives, in addition to salary. **Apply with just a few clicks:** ad code **90350** Any questions? **Contact rwece_******************** We look forward to meeting you. Of course, you can find us on LinkedIn, Instagram, Facebook, YouTube and Xing, too. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. Through its subsidiary RWE Clean Energy, RWE is the third largest renewable energy company in the United States, with a presence in most U.S. states from coast to coast. RWE's team of about 2,000 employees in the U.S. stands ready to help meet the nation's growing energy needs. With its homegrown and fastest-to-market product, RWE supports the goal of American Energy dominance and independence. To that end, RWE Clean Energy is committed to increasing its already strong asset base of over 10 gigawatts of operating wind, solar and battery projects, focusing on providing high-quality jobs. RWE invests in local and rural communities while strengthening domestic manufacturing supporting the renaissance of American industry. This is complemented by RWE's energy trading business. RWE is also a major offtaker of American liquified natural gas (LNG). As an energy company with a successful history spanning more than 125 years, RWE has an extensive knowledge of the energy markets and an excellent expertise in all major power generation and storage technologies, from nuclear, coal and gas to hydro, batteries, wind and solar. Every project brings constantly-evolving technical, practical and social challenges - and drives a culture where everybody thrives, has fun and feels excited by each day. As the third largest renewable energy company in the U.S., you'll also have the freedom to act with conviction and courage as we pivot to new technologies - and continuously improve, together.

An employee in this class performs supervisory and professional engineering work in the design and construction of electrical systems for County facilities. Responsibilities in building and sanitation operation and maintenance include directing all preventive maintenance, major repairs and alterations to electrical equipment and systems. An incumbent in the area of design and construction supervises the preparation and review of plans and specifications for the construction of power distribution and control systems for County buildings and sewerage facilities. Supervision is received from an administrative supervisor who reviews work through periodic reports, budget requests and discussions on major projects. *Does related work as required. KEY RESPONSIBILITIES : Reviews and supervises varied maintenance activities, repairs, and alterations to the physical plant of County buildings and sewerage facilities, in such areas as power distribution, control and other major improvements; Reviews electrical plans, estimates and specifications submitted by consulting engineers and contracting firms on county construction and renovation projects; Supervises an engineering staff in the preparation and design of systems, plans, cost estimates, and contract specifications for the construction and alteration of power distribution and control systems in County buildings and sewerage facilities; Directs the inspection of electrical work being performed by contractors on electrical systems in County facilities; Diagnoses and repairs malfunctions in programmable logic controller-based control systems and modifies ladder logic of such systems in response to changing control needs; Makes periodic maintenance checks on electrical systems of facilities; reviews and approves recommendations for facility electrical improvement or repair submitted by supervisors; prepares estimates of labor and material costs; Prepares bid specifications on building supplies, equipment and outside labor used in the maintenance and repair of power and control systems in County facilities; reviews bids and submits reports; Acts as an engineering consultant to other County departments in matters relating to the improvement of electrical systems in County buildings and sewerage facilities. Benefits For You Now And Your Future Health Insurance: Suffolk offers a comprehensive health insurance plan, including medical, dental, and vision coverage Pension Paid Time Off: Vacation (2 weeks to start) is accrued based on length of service; sick leave allows employees to take time off for illness without sacrificing pay; personal days can be used for a variety of reasons; and thirteen (13) paid holidays. Work-Life Balance: County jobs offer regular working hours, reducing the need for overtime or irregular shifts. This helps employees maintain a good work-life balance. Overall, county government jobs offer a combination of competitive benefits and job security, making them an attractive option for many job seekers. *This position does not offer relocation assistance at this time **Sponsorship is not available for this role Salary Range: $84,616 to 140,392 OPEN COMPETITIVE Either: a) Graduation from a college with federally-authorized accreditation or registration by NY State with a Bachelor's Degree in Electrical Engineering or Mechanical Engineering, and eight (8) years of experience in the design and/or installation of electrical systems and equipment, including four (4) years as a Licensed Professional Engineer; OR b) Graduation from a standard senior high school or possession of a high school equivalency diploma and twelve (12) years experience in the design and/or installation of electrical systems and equipment, including four (4) years as a Licensed Professional Engineer; OR c) An equivalent combination of education and experience as defined by the limits of a) and b). PROMOTIONAL Either: a) One (1) year of permanent competitive status as an Energy Engineer; or OR b) Two (2) years of permanent competitive status as an Electrical Engineer. ADDITIONAL POSITION DETAILS: Thorough knowledge of the principals and practices of electrical engineering Thorough knowledge of the planning, design and construction of power and control systems in buildings and sewerage facilities Thorough knowledge of the procedures of inspection of building electrical equipment Thorough knowledge of the principals and practices of electrical engineering specification writing Thorough knowledge of construction estimating, including the relative cost and useful life of materials Good knowledge of programmable logic controllers and their application in control systems Good knowledge of modern developments, current literature and sources of information applicable to the field of power and control engineering Good knowledge of applicable laws and regulatory codes on building electrical construction Ability to plan, design, and prepare and review engineering plans and specifications for power and control systems in buildings and sewerage facilities Ability to perform electrical engineering computations and to make comprehensive recommendations on electrical engineering problems Ability to plan, schedule, coordinate and review the work of professional, technical and clerical personnel in a manner conducive to full performance and high morale Ability to prepare comprehensive reports Ability to prepare a budget of a unit or division and manage its allocated funds Physical condition commensurate with the demands of the position. Suffolk County's Commitment to Diversity, Inclusion & Equity: Our focus is to promote, support, and implement the County-wide diversity and inclusion strategic plan. We achieve results in all our responsibilities through the use of diversity and inclusion best practices. We maintain a familiarity with Diversity & Inclusion trends and best practices. Suffolk County is an Equal Employment Opportunity Employer and does not discriminate against applicants or employees on the basis of race, color, religion, creed, national origin, ancestry, disability that can be reasonably accommodated without undue hardship, sex, sexual orientation, gender identity, age, citizenship, marital or veteran status, or any other legally protected status.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 Every successful engineering career needs a solid foundation, and thats exactly what youll get. Do your job right, and youll build structures that will last for years to comeand a career that will take you wherever you want to go. ELECTRICIANS MATE Whether youre installing the latest electrical panels in the cockpit or troubleshooting the electric breakers on a submarine, you are responsible for keeping the power flowing. If youre fascinated by complex circuits and schematics, a career as an EM might be your perfect match. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Potential to earn a bonus upon enlistment Free health insurance Free housing A retirement plan Paid training College credit EDUCATION OPPORTUNITIES Navy College Program and Tuition Assistance Post-9/11 GI Bill, up to 100% tuition Professional credentials and certifications College credit hours toward a bachelors or associate degree through the American Council on Education QUALIFICATIONS AND REQUIREMENTS U.S. citizen or equivalent High school graduate or equivalent 17 years of age or older General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Youll construct and repair a variety of structures in just about every environment imaginable. You may work at Navy bases or ports of call around the globe, and you may be deployed to help develop or rebuild areas affected by natural disasters. PART-TIME OPPORTUNITIES Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Sailors in the Navy Reserve typically work at a location close to their homes. Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors. RequiredPreferredJob Industries Government & Military RequiredPreferredJob Industries Government & Military RequiredPreferredJob Industries Government & Military RequiredPreferredJob Industries Government & Military

Were looking for a Staff Electrical Engineer to join our Substation team. This role will focus on delivering engineering and consulting services for projects across the U.S. and internationally. Work will span from small distribution upgrades to large transmission projects. This is an opportunity to shape the resiliency, reliability, and efficiency of the electric grid. Key Responsibilities Lead and support design of high-voltage (13kV500kV) substations Develop proposals, scopes, conceptual designs, and execution plans Prepare engineering estimates, schedules, and project deliverables Execute physical substation designs: yard layouts, grounding, lightning protection, control buildings, raceways, AC/DC power systems, and material lists Perform protection and control design: panel arrangements, one-lines, schematics, wiring, and relay panels Conduct engineering studies and reports (grounding, load studies, etc.) Develop equipment specifications for procurement and testing Coordinate with civil/structural, transmission line, and other teams Mentor junior engineers and provide technical guidance Engage with clients and conduct quality reviews Provide short-term construction field support Contribute to business development and industry involvement Qualifications Bachelors in Electrical Engineering (ABET-accredited) + 3 years experience; or Bachelors in Electrical/related Engineering Technology (ABET) + FE exam + 3 years experience; or Masters in Electrical Engineering + 2 years experience Consulting experience preferred Strong grounding in engineering techniques, analysis, and problem-solving Skilled communicator (written and verbal) Proficiency in Microsoft Office, AutoCAD, MicroStation, 2D/3D rendering, and analysis tools Strong attention to detail, organization, and collaboration skills EIT Certification preferred

Responsible for substation engineering and consulting services for clients across the US and internationally. Main responsibilities include creating electrical protection & control and/or physical layout design deliverables. Projects range in size, complexity, and voltage class from small distribution facility upgrades to large transmission projects. This position can influence the future of the resiliency, reliability, and economic operation of the electric grid. Principal responsibilities include the design of high voltage (13kV-500kV) electrical substations. Areas of design and responsibilities include leading and executing the following: Preparation of proposals and scope development, including conceptual designs and execution plans. Prepare engineering cost and labor estimates and schedules. Physical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material. Protection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring. Preparing calculations and reports for engineering studies. (grounding, lightning protection, AC/DC load studies, etc.) Preparing equipment specifications for procurement and/or factory acceptance testing. Coordinating design activities with other departments. (Civil/Structural, Networks, Transmission Line, others.) Providing guidance and mentoring to less experienced team members. Regularly meeting with and corresponding with clients or outside personnel. Performing quality reviews for other engineers and designers. Providing short term field support during construction. Supporting business development and marketing initiatives. Other areas of involvement may include relay settings, 3D/intelligent design, or industry/professional technical committee involvement. Performing other duties as assigned. Qualifications Bachelor's Degree in Electrical Engineering or related degree from an ABET-accredited program and 3 years of electrical engineering experience required. Consulting experience preferred. Bachelor's Degree in Electrical or related Engineering Technology from an ABET-accredited program and successful completion of the Fundamentals of Engineering (FE) exam and 3 years of electrical engineering experience required. Consulting experience preferred. Master's Degree in Electrical Engineering and 2 years of electrical engineering experience required. Consulting experience preferred. Strong knowledge in standard engineering techniques and procedures. Excellent written and verbal communication skills. Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills. Proficient in standard engineering techniques and procedures. Strong computer skills (e.g. Microsoft Office Suite) Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs. Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. Engineers in Training-EIT Certification preferred EEO/Disabled/Veterans Primary Location : US-CT-Wallingford Other Locations : US-MA-Newton, US-PA-Conshohocken, US-NJ-Morristown Travel : Yes, 25 % of the Time Kodi Miller (Miss) Talent Scout AKP Recruiting kodi@akprecruiting.com www.akprecruiting.com Josh May President AKP Recruiting (406) 633-1654 josh@akprecruiting.com www.akprecruiting.com

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Join Arcadis' growing national Water Infrastructure Design Services group as a Staff Electrical Engineer with specialty in providing electrical engineering for water and wastewater facilities in White Plains, NY. This is a role with significant upward career mobility, and opportunities to work on small and large-scale industrial utility projects nationally. We're looking for individuals who want to progress as Electrical Engineers in the water industry, and who want to actively pursue their PE and advance in their concept, planning and design for industrial electrical systems. The primary focus of this role will be to provide technical and design consulting services with a focus on electrical power distribution, motor controls, lighting, and communications, to support projects for the Infrastructure Design Services Group in the Water Business Line. Role accountabilities: Project Involvement: Support Senior Electrical engineers on large-scale projects in project planning, design and design services during construction for water/wastewater facilities and other similar industrial facilities. For smaller projects, lead Electrical design efforts and coordination of under the supervision of a Senior Electrical engineer. This will include establishing design criteria, performing design calculations, developing one-line diagrams, control schematics, plans and specifications, under the supervision of Senior Electrical Engineer Project Management: Develop project management skills including support in managing budgets and delivery schedules for each assignment; for project/task scope schedule and budget. Software Skills: Utilize CAD Programs proficiently (Autodesk Products, etc.) to execute design work. You will be expected to perform system analysis using ETAP, SKM Power Tools or other power systems analysis software, under the supervision of Senior Electrical Engineer(s). Construction Management: Perform engineering services during construction, including reviewing equipment submittals, shop drawings and responding to contractor RFI's (request for information), under the supervision of Senior Electrical Engineer(s). This role will include conducting field inspections, assisting projects in construction which includes identifying deviations from design, and monitoring safety compliance. Some travel may be required to support project needs. Key Skills and Attributes: We are looking for candidates with a developing knowledge of the National Electrical Code and related standards, who can work effectively within multi-disciplinary teams to help deliver projects on schedule and within budget. You should be comfortable assisting in client meetings under the guidance of senior engineers or project managers, and able to clearly present and explain your design ideas to others. Strong organizational skills are important, as you will need to manage multiple assignments and meet project deadlines. A willingness to accept feedback and continuously improve your work processes and technical skills is essential, along with excellent verbal, written, and interpersonal communication abilities. Qualifications & Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, Electrical Engineering Technology, a related discipline or equivalent work experience. 3+ years' relevant experience in Electrical Engineering design. EIT certification and working towards a PE. Experience in Autodesk Revit or equivalent CAD program. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $85,000 - $140,000. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #Resilience-ANA #Water-ANA

JOB TITLE: Junior Electrical Engineer TYPE: Full time, regular COMPENSATION: $70,000 $95,000/yr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Junior Electrical Engineer will be working alongside our existing electrical engineers, mechanical engineers and software engineers on medical device development. This role is multi-disciplinary with technical responsibility for our device electrical system, PCBs and wiring diagrams, providing continuous feedback on the development process and accepting feedback as well. It is also expected that some software development for the device will be performed by the Junior Electrical Engineer. The ideal candidate will have a deep understanding of hardware electrical design and exposure to software development for hardware. We are looking for a team player who views medical device development as a competitive advantage. Responsibilities : Designing system level schematics, electrical isolation strategy, as well as detailed PCB schematics and layout Designing precision motion stages and components, electromechanical system parts and assemblies in a CAD environment Developing low-level device control software in C++ with guidance Documentation, including schematics, wire harness drawings, PCB files, and component specifications for FDA processes Modeling and developing electrical systems throughout the device, such as, stepper and DC motor control, AC power systems, low voltage data, and high sensitivity analog and digital signals Designing and prototyping analog and digital circuits, primarily for integration of sensors Building cable harnesses, designing signal and power distribution networks Building prototypes and test fixtures including instrumenting with data acquisition systems and programming Unit and system testing of prototype designs Qualifications : Bachelor's degree or Master s Degree in Electrical Engineering or a related field. 2+ years of experience working in the field of electrical engineering Exposure to software/firmware programming in C++ Competency in designing large electromechanical system components Proven design record Analytical problem solution skills, such as modeling and simulations Design of high sensitivity analog and data systems Design of power conditioning due to motors and high inrush current components Design experience with embedded hardware such as Microcontrollers and FPGAs Knowledge of IEC safety and EMC standards and experience in working with regulated test labs Involvement in automation-related extracurricular activities, such as, First Robotics Lab bench experience including, soldering, wiring, troubleshooting, and using lab equipment to explain results Experience in working with Linux systems and micro processors Familiar with PCB design tools. Altium Preferred Strong interpersonal, verbal, and written communication skills Time management skills to prioritize and meet deadlines Ability to work independently and as a member of a team Flexibility to work in a changing and fast paced environment Drive, determination and ability to hit aggressive milestones/deadlines Proficiency in Microsoft Office Applications including Excel, PowerPoint, and Word Company Offers: Competitive salary, commensurate with experience and education Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays) A collaborative and diverse work environment where our teams thrive on solving complex challenges Ability to file IP with the company Connections with world class researchers and their laboratories Collaboration with strategic leaders in healthcare and pharmaceutical world A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionAssociate Electrical Engineer Long Island, NY (Suffolk County) On-site | Full-time | Aerospace, Defense & High-Reliability Electronics Must be US Citizen or Green Card Holder No Visa Candidates No relocation must be local About the Company For more than 50 years, this Long Island-based manufacturer has been quietly powering some of the world's most critical technologies - from aerospace and defense systems to medical and high-reliability electronics. Their legacy is built on precision, performance, and people. Here, engineers don't just follow specs - they design, test, and innovate products that make missions possible. If you're looking for a place where you can grow your technical depth, work alongside seasoned engineers, and see your ideas come to life in real products - this is the place to do it. The Opportunity As an Associate Electrical Engineer, you'll be part of a collaborative team developing and testing advanced semiconductor and microelectronic products. You'll gain hands-on exposure to real-world applications - from building and qualifying test systems to supporting product launches and improving reliability across complex assemblies. This is an ideal role for someone with a strong technical foundation who wants to bridge theory and practice, working in a lab environment that values curiosity, precision, and continuous learning. What You'll Do Design, build, and troubleshoot test setups for new and existing products Support qualification and production testing of semiconductor and microelectronic devices Contribute to PCB layout and assembly, test box development, and documentation Assist in ATE (Automated Test Equipment) integration and code development (C# preferred) Prepare and maintain test traveler documentation for production runs Partner closely with production and engineering teams to ensure smooth product transitions from prototype to manufacturing What You Bring B.S. in Electrical Engineering (BSEE) or equivalent technical background / relevant military training Foundational knowledge of power electronics and analog/digital circuit design Ability to analyze and troubleshoot circuits - both theoretically and hands-on Exposure to C++, embedded code development, or C# test software (a plus, not required) Eagerness to learn, collaborate, and take ownership in a fast-paced, high-impact environment Why You'll Love It Here Work directly with senior engineers and technical leaders who mentor and invest in your growth See your work directly impact mission-critical systems for aerospace, defense, and medical applications Be part of a stable, established company with a start-up feel in the lab - where innovation still happens daily

Introduction ASML US, including its affiliates and subsidiaries, bring together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world's leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, Netherlands and we have 18 office locations around the United States including main offices in Chandler, Arizona, San Jose and San Diego, California, Wilton, Connecticut, and Hillsboro, Oregon. Your Assignment As an Electronics Development Intern, you will be working with teams developing portions of the lithography system and/or associated tooling related to the electronics. Additionally, you will collaborate with a multidiscipline project team working on the electrical infrastructure, engineering analysis and generation of electronic designs. The position requires highly motivated, extremely organized and self-driven individuals with strong communication skills. Your Profile Pursuing Bachelor's Degree in Engineering discipline with a major in Electrical Engineering or Electrical and Computer Engineering Understanding or exposure to the following a plus: Analog, Digital and Programmable Logic Circuit Design Schematic Capture AC and DC Power Distribution systems Printed Circuit Boards- PCB signal and power integrity Test and Troubleshoot electronic systems to Component level Write technical documents, Test Procedures, Test Reports Software/Tool Skills Electronic Design Automation - Mentor Graphics xDX/xPCB Designer, PSpice, OrCAD, PADs or similar MATLAB LabVIEW Python Skills Working at the cutting edge of tech, you will always have new challenges and new problems to solve - and working together is the only way to do that. You will not work in a silo. Instead, you will be part of a creative, dynamic work environment where you will collaborate with supportive colleagues. There is always space for creative and unique points of view. You will have the flexibility and trust to choose how best to tackle tasks and solve problems. To thrive in this job, you will need the following skills: Can observe and respond to people and situations and interact with others encountered in the course of work Can learn and apply new information or skills Must be able to read and interpret data, information and documents Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism Ability to complete assignments with attention to detail and high degree of accuracy Proven ability to perform effectively in a demanding environment with changing workloads Result driven-demonstrate ownership and accountability Identifies bottlenecks and drives improvements Work independently or as part of a team and follow through on assignments with minimal supervision Demonstrate open, clear, concise and professional communication Ability to establish and maintain cooperative working relationships with co-workers and customer Work according to a strict set of procedures within the provided timelines Other information This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology. This position is located on-site in Wilton, CT. It requires onsite presence to attend in-person work-related events, trainings and meetings and to further ensure teamwork, collaboration and innovation Role within Office Responsibilities: The essential job functions for this position include, but are not limited to: Work in a fast-paced office environment, including working in a standing or seated position for long periods sometimes exceeding 8 hours per day, 5 days per week Commute to ASML's facility and report to work on a regular and timely basis and complete the scheduled workday on a consistent basis Routinely required to sit; walk; talk; hear; use hands to finger, handle and feel; stoop, kneel, crouch, twist, reach and stretch Occasionally required to move around the campus Perform office tasks using simple hand grasping, fine hand manipulation and reach associated with assigned tasks such as paperwork, computer keyboarding (e.g. Word, Excel, PowerPoint), filing, calculating and use of telephone or other handheld electronic devices, continuously sometimes exceeding 8 hours per day, 5 days per week Have a sufficient ability to communicate, through sight, hearing and/or otherwise, to perform assigned tasks and maintain proper job safety conditions Occasionally lift and/or move up to 20 pounds Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus Perform other functions that may be assigned Additional Responsibilities (as needed in the cleanroom and/or labs): The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Must be willing to work in a clean room environment, wearing coveralls, hoods, booties, safety glasses and gloves. Working under ISO 9000/14000 standards The environment in the cleanroom is moderate in temperature with moderate to high noise level Working around lasers; working with ladders; working on platforms; and working around chemicals Additional Responsibilities: There is potential for exposure to strong magnetic fields, high voltage and currents. This position requires access to controlled technology, as defined in the United States Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology. Inclusion and diversity ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that inclusion and diversity is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions. Request an Accommodation ASML provides reasonable accommodations to applicants for ASML employment and ASML employees with disabilities. An accommodation is a change in work rules, facilities, or conditions which enable an individual with a disability to apply for a job, perform the essential functions of a job, and/or enjoy equal access to the benefits and privileges of employment. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company's reasonable accommodation process. Please note: This email address is solely intended to provide a method for applicants to initiate ASML's process to request accommodation(s). Any recruitment questions should be directed to the designated Talent Acquisition member for the position.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** Job Description Scope: We are looking for talented and highly motivated individuals to assist our Electrical Engineering team with the design and development of leading-edge products for military and space-based applications. Our Summer Engineering Internship Program offers students the opportunity to apply engineering skills in a dynamic and real-world environment in the following areas. Essential Knowledge and Skills: The Electrical Engineer Interns develops and tests electrical and mechanical components for specific projects and systems. This involves: * Researching electronic equipment * Designing electrical systems based on customer specifications * Coordinating activities involved in the fabrication, operation, application, installation, and repair of components Education and Experience: * Majoring in Electrical Engineering All candidates must be currently enrolled in a bachelor's degree program at an accredited college or university having completed their sophomore year. * Candidates must have strong verbal and written communication skills and must be maintaining a 3.0 grade point average or higher. * Must have a background that would permit the U.S. Department of Defense to issue a Secret clearance, which includes US citizenship. This internship is for Summer 2026. #LI-MP1 Compensation: Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $38,079 - $57,118 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Electrical Engineering Internship - Summer 2026 The Best Experience Company Our tagline is "The Best Experience Company." More than just a set of words, it represents the essence of who we are at Springs Window Fashions. As North America's premier window covering company, we're committed to creating the Best Experience for our associates, consumers and end users, business partners, and communities. We want you to join our team of passionate self-starters who believe the world is full of Best Experience opportunities. So, if you're excited about the thought of a Best Experience career with a team focused on creating Best Experiences for all, we want to hear from you! Internship Overview Springs Window Fashions is looking for a motivated and hardworking individual to join our Electrical Engineering Team! The Electrical Engineering Internship provides an exciting opportunity to assist the team with project support while providing valuable work experience related to your chosen field of study. Our paid internship program is known for having in-depth, challenging project work with cross-functional teams, as well as professional development, job shadowing and other growth opportunities. Internship Projects and Responsibilities * Work with mentor on applying AI/ML to our SolarTrac solution: * Create and test design specifications * Develop code to extract data from motor and SolarTrac implementations, and develop learning approach with an AI engine * Map SolarTrac post-installation customer experience * Assemble prototypes and execute testing * Establish SOPs for specific test processes * run tests and document results What Spring's Best Experience Means for You Springs Window Fashions offers incredible opportunities to develop the skills you'll need to be successful in a fast-paced consumer products company. You'll also be provided with several perks and benefits as a member of the Springs team: * Renovated Mecho headquarters located in Long Island City, NY * Hourly pay rate of $21.00/hr * Exposure to other roles and functions within SWF * Career advancement opportunities * Regular interaction with multiple functional areas and with others at all levels within the organization, from production to senior leadership * Paid on-the-job training; in-depth product knowledge sessions via online courses, live online classes, and live sessions Requirements What We're Looking For * Previous internship experience in relevant function preferred * Pursuing a 4-year degree with preferred current standing of Sophomore/Junior level * Electrical Engineering Major Preferred * Proficient computer skills Microsoft Office * Problem-solving and critical thinking skills * Strong communication skills (verbal, written and attention to detail) * Positive attitude and eagerness to learn How We Work to Deliver a Best Experience: Our Culture * Our Core Value: We do the right thing, always * Our Seven Cultural Behaviors * Empowerment - We trust our people. * Ownership - We take 100% responsibility for our roles actions, and results. * Leadership - We all lead by example and talk direct with respect (DWR). * One Team - We are One Springs Team. * Customer First - We consider our customers' needs before every decision. * Continuous Innovation - We are constantly learning, innovating, and improving. * Speed - We define priorities and operate with a sense of urgency and agility.

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: The Electrical Engineer Intern is responsible for assisting with engineering projects across multiple phases, including fabrication, testing, and evaluation of equipment or prototypes. This practical experience provides the intern with varied assignments under general supervision while contributing to innovative solutions that are important to both their professional growth and NAI's business success. This Internship is for Summer 2026. Requirements * Build prototype circuitry under the guidance of engineers. * Assist in testing and debugging to the component level. * Help write test procedures and document engineering evaluations on products, specifications, and requirements. * Support resolution of design problems on production hardware. * Document schematics using schematic capture software. * Contribute to programs for microprocessors, components, or automated test systems. * Draft test reports that demonstrate product performance. * Participate in team discussions about product development and production support needs. Qualifications and Education Requirements: * Enrolled in an Electrical Engineering or Computer Engineering program. * Proficiency with Microsoft Office and Windows applications. * Knowledge of drafting tools, schematic capture software, and power supply circuitry. * Effective oral and written communication skills in English. * Strong analytical and problem-solving skills. * Ability to take initiative and multi-task in a fast-paced environment. Preferred Skills and Abilities: * Previous internship, project, or coursework experience in power supply design, digital design, or embedded systems. * Familiarity with engineering lab tools such as oscilloscopes, logic analyzers, and other test equipment. * Exposure to programming languages such as C or C++. * Self-motivated with curiosity and desire to learn new technologies. Full-time schedules for Summer internships. (40 hour week) Approx. Start Date End of May/Beg of June. This is a paid Internship. Internship salary is based on position and academic year standing. North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $16.50-$25.00 per hour

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: Define and develop RF system architectures for radar and advanced sensing applications. Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. Conduct trade studies and system optimization to balance performance, cost, and schedule. Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. Perform root cause analysis of system performance issues and recommend design changes. Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. Demonstrated experience deriving and validating system-level RF budgets. Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: Experience in phased-array architectures and beamforming. Knowledge of military/aerospace standards and environmental testing. Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.