Electrical engineer jobs in Cerritos, CA

Senior RF Engineer Orange County, CA Our exciting Space client are looking for an RF engineer to be responsible for the RF design for a remote sensing payload, this roles responsibility includes the concept of operations (CONOPS) for the payload on the bus given on orbit constraints such as power, attitude, thermal loads. Being responsible for all aspects include the ground processing. With support as needed from the SAR/DevOps team, they will be responsible for designing and developing the ground-based solution that would work with various ground systems. Success in this role requires someone with very detailed experience with both SAR theory as well as hands on design experience for both the hardware and software. They will need to be a self-starter with strong initiative to assist in planning out the direction, executing on the plan, then adjusting the plan when unknowns become knowns. Key Responsibilities: Analyze and optimize RF design for Synthetic Aperture Radar (SAR) payloads while collaborating with cross-functional teams to meet project specifications Lead the design of complex systems involving high-speed digitizers, low-noise RF circuits, FPGAs, and embedded processors Work closely with SAR Engineers to test and validate SAR payloads and data collections Conduct detailed RF analysis for antennas and antenna arrays Create RF subsystem requirements and derive engineering requirements to meet project goals Perform microwave analysis using Python or similar tools Generate documentation and effectively communicate technical information to audiences of varying technical ability Contribute technical writing to RFIs, RFPs, and other business capture activities Ideal Qualifications: Advanced degree in Electrical Engineering, Computer Engineering, or similar field 8+ years of experience in a similar engineering role (RF Engineering, Electrical Engineering) 4+ years of experience in a spacecraft engineering discipline 4+ years of experience in high-speed electronics and RF design Experience in anechoic testing with phased antenna arrays Expertise in RF test automation and data analysis Expertise in electromagnetics, RF, and antenna theory Familiarity with SAR imaging concepts and system design Mastery of signal processing fundamentals, including the manipulation of complex-valued data Preferred Qualifications: 4+ years of hands-on experience in SAR payload design and integration Experience with assembly, integration, and testing for spacecraft/payloads Experience with embedded programming (C/C++) and FPGA design tools (Verilog/VHDL) Background in software configuration management (SCM) and CI/CD pipelines Experience in Python or scripting languages for test automation Experience with formal verification and validation of space-rated systems Due to Import control requirements candidates will need to be Must be a US person with a current TS/SCI clearance or ability to pursue one.

Job Title: Senior Electrical & I&C Engineer - Water and Wastewater MKN is seeking a Senior Electrical & Instrumentation and Controls (I&C) Engineer to support the planning, design, and implementation of electrical and control systems for water and wastewater infrastructure projects. This role is ideal for a seasoned engineer with deep expertise in power distribution and control systems design, PLC/SCADA design/integration, and process instrumentation. You'll work closely with multidisciplinary teams to deliver technically sound and innovative solutions that serve public agencies and communities throughout California. We are a team-oriented and highly motivated group with offices in Irvine, Oceanside, Arroyo Grande, San Luis Obispo, Bakersfield, Fresno, San Jose, Ventura, and Santa Clarita. MKN strongly believes in and understands the importance of balancing work and personal life. Our recent awards, from Great Place to Work and Zweig Top Firms , are a testament to this value and the support we provide to our fellow team members. Our collaborative work environment and inclusive operating philosophy allow us to maintain a positive work culture while providing excellent service to our clients. Key Responsibilities: Design of electrical power distribution system (i.e. 480VAC and below) and I&C systems design ( for water and wastewater treatment facilities, pump stations, and distribution systems. Medium-voltage design experience is a plus. Develop electrical design drawings and specifications, including single-line diagrams, load calculations, panel layouts/schedules, cable/conduit sizing, grounding system design, indoor/outdoor lighting designs, conduit/cable schedules, protective relaying and metering, UPS and power conditioning systems, lightning and surge protection systems, motors and motor controls, and heat tracing design. Perform power system studies including load flow, short circuit, protective device coordination, arc flash analysis, and harmonic studies, using ETAP or SKM. Develop and specify I&C systems pertaining to process instrumentation (flow, pressure, level, analytical, etc.) and support control logic development and system integration, and develop P&IDs, I/O list, loop wiring diagrams, telemetry design and communication/network system architecture. Produce detailed construction contract drawings, specifications, and cost estimates for bid and permit packages. Coordinate with internal engineering teams, integrators, contractors, clients, and regulatory agencies throughout the project lifecycle. Mentor junior engineers and contribute to MKN's technical standards and design practices. Qualifications: Bachelor's degree in Electrical Engineering or related discipline from an accredited university or college. California Professional Engineer (PE) license in Electrical Engineering or Control Systems (or ability to obtain within 1 year). 5+ years of relevant experience in electrical and I&C design for municipal water and wastewater infrastructure. Strong understanding of low-voltage power systems, motor control, VFDs, MCCs, emergency power systems, and electrical codes and standards (NFPA70-NEC, NFPA 820, NFPA 70E, IEEE). Proven experience with power distribution, lighting, grounding, and PLC controls systems design. Proficient in AutoCAD, Revit, and design/analysis software (ETAP, SKM, RSLogix/Studio 5000). Familiarity with I&C specifications and process instrumentation in water/wastewater environments. Excellent communication skills, a collaborative spirit, and demonstrated ability to manage schedules and budgets. Strong attention to detail, organizational and time management skills, adaptable, agile, and responsive to quick changes in direction, with strategic thinking and problem-solving abilities. Why Join MKN? Be a technical leader on meaningful public infrastructure projects that impact California communities. Join a collaborative, award-winning team committed to innovation and excellence. Enjoy work-life balance, career growth opportunities, and continued professional development. Access competitive compensation and a comprehensive benefits package. Compensation & Benefits: Compensation is based on experience and qualifications. Anticipated salary range: $110,000 - $150,000. MKN offers a competitive benefits package including health insurance, retirement plan, paid time off, and support for licensure, continuing education, and training. Submit your resume and a brief cover letter to **************************** outlining your interest and qualifications for this position. MKN does not sponsor foreign nationals for employment-based visas or permanent residence.

Hour: Monday - Friday 7:30am - 4:30pm Pay: $58,100 - $77,400 Direct Hire **Must be US Citizen or Permanent Resident ***Must be able to pass a background check/drug screen, cannot test positive for marijuana An industry leading manufacturer of gas and liquid analyzers is seeking an Electrical Engineer to join their team. This individual will be responsible for designing, developing, modifying, and evaluating electronic parts, components, or integrated circuitry for electronic equipment, and/or other hardware systems. Determines design approaches and parameters. Selects components and equipment based on analysis of specifications and reliability. May also review vendor capability to support product development. May use computer-assisted engineering and design software and equipment to perform assignments. Applies principles and techniques of electrical engineering to accomplish goals. Works under general supervision. Exercises judgment within defined procedures and practices to determine appropriate action; a certain degree of creativity and latitude is required. Job Duties: · Provides analysis related to the design, development, and implementation of electronic parts, components, or integrated circuitry for hardware systems. · Develops test strategies, devices, and systems. · Plan and implement research methodology and procedures to apply principles of electrical theory to engineering projects. · Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. · Performs stress and performance tests on a variety of computer hardware including circuit boards, processors, and wiring. · Operate computer-assisted engineering and design software and equipment to perform engineering tasks. · Designs and modifies PCB/PCA's using ECAD software. · Prepares and studies technical drawings, specifications of electrical systems, to ensure conformity to standards and customer requirements. · Generates architecture for functional components and assists with product architecture. · Delivers hardware designs through prototype, beta, and production release in compliance with product development process and quality practices. · Supports existing products by troubleshooting and failure analysis. · Participates in technical design reviews of existing designs and peer reviews. · Compile data and write reports regarding existing and potential engineering studies and projects. · Briefs others on deliverables, status, and progress. · Documents and demonstrates solutions by developing documentation, flowcharts, layouts, diagrams, and charts. · Provides information by collecting, analyzing, and summarizing development and service issues. · Intermediate level experience with design of analog and digital circuits · Ability to test designs to specification. · Circuit analysis skills using applied calculus and algebra, including component stress analysis. · Strong analytical, problem solving, communication and project management skills are required. · Daily availability to include evenings and weekends when necessary to reach goals and deadlines. Qualifications: · Bachelor's degree in a related field · 2 - 5 years directly related experience and/or training · Must have experience with Altium Software · Experience with Functional Safety (SIL) and ATEX Intrinsic Safety (Ex'ia') is a plus · Individuals that have strong communication skills, problem solvers, and project management skills are helpful All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

We are seeking an experienced Electrical Engineer to support high-power system design and testing initiatives for our client in Irvine, CA. The ideal candidate will have strong hands-on experience with high-voltage circuits, power components, and lab testing, along with exposure to manufacturing support and documentation. Key Responsibilities: Design, develop, and implement technical solutions for high-voltage and high-power systems Support high-power testing and design testing fixtures Select and evaluate power components for electrical systems Perform hands-on testing using lab instruments such as oscilloscopes, RLC analyzers, and related equipment Create and maintain cable harness drawings using AutoCAD or similar tools Prepare and manage Bill of Materials (BOM) documentation Support manufacturing activities by troubleshooting issues and providing engineering solutions Collaborate with cross-functional engineering and production teams Required Skills & Qualifications: Experience working with high-voltage circuits and power component selection Hands-on experience with lab instruments (oscilloscopes, RLC analyzers, etc.) Experience designing testing fixtures for high-power systems Proficiency in AutoCAD for cable harness design Experience with BOM creation and manufacturing support Strong problem-solving and communication skills

HCLTech is looking for a highly talented and self-motivated Electrical Design Engineer to join it in advancing the technological world through innovation and creativity. Job Title: Electrical Design Engineer Position Type: Fulltime Location: Irvine, CA Key Responsibilities: Core Expertise End-to-end New Product Development (NPD) experience including system architecture, design, rapid prototyping, integration, testing, V&V, and design transfer. Strong knowledge of medical capital systems product lifecycle and disposables (e.g., catheters, endoscopes, pumps). Hands-on design experience in analog and digital board design involving microprocessors, microcontrollers, memory, sensors, and amplifiers. Proficiency in interface protocols such as I²C, UART, SPI, USB, and PCI. Expertise in high-density cable design, harnessing, and cabling. Tools & Standards Skilled in ECAD tools (OrCAD, Allegro) for schematic generation and PCB layout, including DFx and Gerber release. Experience in component engineering and BOM creation for prototype, pilot, and production phases. Strong understanding of IEC 60601, FDA submission requirements, and medical regulatory standards. Familiarity with VAVE analysis, vendor qualification, and supplier discussions. Testing & Validation Proficient in using test equipment such as oscilloscopes, multimeters, flow meters, and signal analyzers for troubleshooting and validation. Ability to draft test protocols, generate reports, and perform bench testing, system characterization, and verification. Soft Skills Excellent communication skills and ability to collaborate effectively with cross-functional teams. Strong problem-solving mindset and attention to detail. Education & Experience Bachelor's degree in Electrical Engineering or equivalent (Master's preferred). Minimum 5+ years of relevant experience in electrical design and development. Pay and Benefits Pay Range Minimum: $85000 per year Pay Range Maximum: $130000 per year HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. Compensation and Benefits A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year. How You'll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Local General Engineering Contractor seeks a Project Engineer for paving, grading, and underground projects. Ideal candidate should possess a minimum of 2 years of related project management and/or estimating skills. RESPONSIBILITIES: The Project Engineer is responsible for ensuring construction work complies with safety, specifications, cost guidelines, reporting requirements and field engineering activities for assigned projects. Major focus will vary depending on project needs and priorities. Maintains positive relationships with owners, community members and project team members. DUTIES: Able to perform all essential Project Engineer responsibilities. Attend and document project meetings. Set up and maintain electronic filing system as needed. Update and maintain all drawings, specifications and logs. Maintain a site-specific safety plan and pre-task planning process, including audits, meeting, training, etc. Review, analyze, and transmit submittals. Prepare and maintain submittal logs and procurement log. Perform expediting functions. Cost code and/or verify correct codes on time sheets. Code Accounts Payable workflows as assigned. Verify original estimate quantities for labor cost reports. Report quantities in place and maintain labor cost report. Prepare and document extra work orders. Review and assemble change order submittals and quantity surveys. Maintain record set drawings. Document punch list work. Complete other responsibilities as assigned. MINIMUM SKILLS: Bachelor's Degree in Construction Management or related field of study 2 years' work and field experience preferred. Construction related internship experience preferred. Basic understanding of construction cost accounting, estimating, and scheduling skills. Experience with HCSS, HeavyBid, Procore ideal, not required. Ability to read and understand plans and specifications. Effective organizational skills, strong work ethic, and eager to learn. Valid driver's license and reliable transportation.

Must Have Technical/Functional Skills • Mechanical engineer in aerospace domain with Manufacturing engineering background • Technology Development • New Product Introduction • In-service reliability tracking and investigations. • Non-conforming material review • Production modifications • Obsolescence management. • Work as Technical Lead to groom and guide the offshore team • New Product Introduction /Sustaining Project engineering, fulfilling the requirements of Project Engineers, Design Engineers, Mechanical Engineers, and Stress engineers. • Develop the Method/Process on how to flow, control and execute the task. • Interact with the customer to understand the requirements and propose and implement solutions • Design and lead the development of different modules and other release processes • Work closely with customer to understand the requirement • Data segregation, • Triaging • Catia Solidworks • Must be US Roles & Responsibilities • Work as Technical Lead to groom and guide the team • Interact with the customer to understand the requirements and propose and implement • Participating in business requirement discussions and providing key technical inputs • Leading the technical deliverables • Directly handling technical queries from customer Base Salary Range: $120,000 - $140,000 per annum TCS Employee Benefits Summary: Discretionary Annual Incentive. Comprehensive Medical Coverage: Medical & Health, Dental & Vision, Disability Planning & Insurance, Pet Insurance Plans. Family Support: Maternal & Parental Leaves. Insurance Options: Auto & Home Insurance, Identity Theft Protection. Convenience & Professional Growth: Commuter Benefits & Certification & Training Reimbursement. Time Off: Vacation, Time Off, Sick Leave & Holidays. Legal & Financial Assistance: Legal Assistance, 401K Plan, Performance Bonus, College Fund, Student Loan Refinancing.

Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We design, build, and test next generation weapon systems to give America and its Allies a definitive edge in defense capabilities. Automation and Controls Engineer The Automation and Controls Engineer will design, build, and commission robust manufacturing systems for production of hypersonic-flight components. Success requires a practical application of engineering principles to design, build, test, and commission process hardware, integrate new technologies into our production line, and integrate process equipment and technologies within our production line. We are seeking a hands-on problem solver with strong expertise in electro-mechanical system design and automation systems, as well as experience working with machinery and production environments. The key to excelling in this position is the effective application of mechanical, electrical, and control systems expertise to enable our manufacturing processes. Responsibilities Design, build, customize, and test hardware and control systems for integration into composite manufacturing equipment balancing process requirements, cost and leadtime considerations. Partner with mechanical, materials, and manufacturing engineering teams to align on hardware requirements and design solutions. Mature manufacturing processes via the implementation of process control systems and procedures to ensure production consistency and reliability. Work with suppliers and vendors to define specifications and ensure on-time delivery of equipment for production needs. Troubleshoot hardware malfunction issues to minimize downtime and improve operations. Provide guidance and implement robust plans for hardware maintenance and calibration to ensure reliable operation of the manufacturing equipment. Basic Qualifications Bachelor's degree in mechanical engineering, electrical engineering, aerospace engineering or industrial engineering. 2+ years of experience in a fast-paced aerospace, automotive, or manufacturing production environment. Experience identifying, trouble shooting and rectifying complex manufacturing issues involving multiple production resources in a deadline driven environment. Understanding of manufacturing processes (machining, welding, forming, composites). Strong mechanical aptitude and willingness to engage in hands-on work to test and implement ideas. CAD / CAM (Siemens NX). Computer Programming (Python, C, NodeJS, HTML, CSS). Preferred Skills & Experience Master's degree in mechanical engineering, electrical engineering, aerospace engineering or industrial engineering. 4+ years of experience in a fast-paced aerospace manufacturing and production environment. Automation (PLC programming, Industrial Robotics). CNC Machining. IoT / Connected factory concepts. Networking skills. Leadership Qualities Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to work independently and resolve minor issues in development with minimal oversight and support. High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity. ITAR Requirements To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. All employees are granted long-term stock incentives as part of their employment at Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Kosmos Group is an engineering consulting firm, specializing in electrical power generation, transmission, substation, and distribution. We support public and private utilities, consultants, and contractors across the U.S. and Canada, providing end-to-end engineering solutions, including conceptual design, feasibility study, detailed design, construction drawing package, field inspection, project closeout documentation, and more At Kosmos Group, we foster an open, collaborative, and supportive culture. We believe our employees reach their full potential when they feel valued and empowered through innovation, teamwork, and growth. We deliver reliable solutions for the future and are a positive influence in our communities Our Transmission Engineering team is looking for a Transmission Line Engineer to support our growing Transmission & Distribution practice in our Diamond Bar office. This is a hybrid position, working 3 days in the office and 2 days from home office. The successful candidate will be involved in all facets of transmission line routing and design. Specific areas of responsibility are provided below. Job Description Routing and design a variety of transmission line projects with project scopes varying from new to rebuilt facilities utilizing Power Line Systems software Responsible for technical content and deliverables while working with multi-discipline teams under the guidance of the assigned Project Engineer or Manager Sag tension calculation for transmission tower loading Structure design and analysis and preparing loading trees Assist in the development of design criteria and specifications for transmission line design and procurement of materials Perform peer quality checks Should be familiar with Transmission industry codes and standards Assist Engineer of Record in preparing construction documents including plan and profile drawings, structure loading trees, and foundation and assembly drawings Assist Engineer of Record with complex projects and be the lead engineer for smaller projects Provide construction support for high voltage transmission line projects Participate and progress the company culture of knowledge sharing and continuous improvement Act as a liaison between Kosmos Group engineering and construction teams by conducting field site visits Apply engineering principals and technical experience address project issues and recommend solutions Additional duties as assigned Required Qualifications Bachelor's degree in engineering from an ABET-accredited college An Engineering-in-Training (EIT) certificate Minimum 2 years of transmission line design experience Experience in Power Line System-based programs (i.e., PLS Suite of software including PLS-CADD, PLS-POLE, etc.) Strong attention to detail, team collaboration, organization, and problem-solving skills Ability to work methodically and analytically in a quantitative problem-solving environment Excellent written and verbal communication skills Ability to travel domestically and internationally as needed for project support Preferred Qualifications Prior engineering consulting experience For California only: this position's base salary range approximation is $100,000.00 - $148,000.00 and it depends on numerous factors such as applicable experience, skills, knowledge, credentials, geographical location, etc. We're seeking passionate individuals who bring fresh perspectives and innovative ideas. This is an exciting time to join our team as we gear up to grow and tackle future challenges. We prioritize safety, foster collaboration, act with integrity, respect all perspectives, and embrace forward-thinking. Are you ready to be a part of the journey? Kosmos Group is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Sustainable Solutions Motive Energy Sustainable Solutions is dedicated to creating sustainable, reliable, and efficient energy systems. We specialize in delivering high-quality Solar PV, Energy Storage Systems (ESS), and Electric Vehicle (EV) infrastructure solutions. Our team values innovation, collaboration, and growth, offering career advancement opportunities as we expand our nationwide footprint. Position Overview: We are seeking a Solar Performance & Commissioning Analyst to support our growing renewable energy portfolio. This position focuses on system performance modeling, production verification, and remote commissioning support for solar PV, ESS, and EV infrastructure projects. The ideal candidate has hands-on technical knowledge of system commissioning but prefers to apply that expertise in a more analytical, office-based setting. You'll ensure projects perform to design expectations by leveraging modeling tools, monitoring platforms, and performance data to validate real-world results and optimize future designs. Key Responsibilities Develop and refine production models using Helioscope, PVsyst, or similar tools to estimate system output based on site conditions and design parameters. Analyze post-installation system performance and identify discrepancies between modeled and actual production. Verify and configure system monitoring platforms (e.g., AlsoEnergy, PowerTrack, SolarEdge, CPS). Support remote commissioning and performance validation for Solar PV and ESS systems. Generate performance reports and provide actionable insights to engineering, construction, and operations teams. Collaborate with field teams to troubleshoot issues and confirm system configurations align with design intent. Maintain detailed documentation of system commissioning and performance data. Participate in the continuous improvement of modeling and monitoring workflows. Required Experience & Qualifications 5+ years of experience in commercial or utility-scale solar energy systems, with a focus on commissioning, system performance, or modeling. Proficiency in Helioscope, PVsyst, or comparable modeling tools. Experience using monitoring platforms such as AlsoEnergy or PowerTrack. Strong analytical skills with the ability to interpret performance data and identify root causes. Excellent communication skills and ability to collaborate across engineering, operations, and customer-facing teams. Preferred Qualifications Experience with energy storage system (ESS) commissioning or performance analysis. Familiarity with network communications (cellular, ethernet, or fiber) as they relate to monitoring systems. NABCEP certification (or in progress). Knowledge of data analysis tools (Excel, Power BI, Python, or similar).

Engineer (Electrical) - Sustainability This position is bond-eligible and is strictly limited to work associated with capital construction, modernization, and sustainability projects. Duties performed under this position shall not include routine maintenance, repair, or operational tasks that fall within the responsibilities of facilities Maintenance & Operations (M&O). The scope of this role is exclusively tied to bond-eligible activities such as planning, design, construction, commissioning, and related project management functions necessary to deliver capital improvements consistent with the organization's requirements and legal limitations governing bond fund expenditures. Position Description: Lead and manage sustainability projects in accordance with District and program policies and procedures for College construction bond operations. Implement the electrification of central plants and other building systems outlined in the Board of Trustees' Clean Energy Resolution passed in July 9, 2020. Apply knowledge of Sustainable Building Principles and Standards to assist with complex systems level issues. Support districtwide energy master planning, carbon reduction, grid resiliency, and electrification initiatives. Apply knowledge of energy and environmental sustainability approaches, such as LEED credits, and its related impacts to operational efficiency. Understand Title 24 and ASHRAE recommendations. Coordinate with multi-disciplinary teams in conjunction with Project Managers, to meet project requirements and timelines. Assist College Project Teams (CPT's) with technical issues that require second opinions i.e. peer review of Request For Clarifications (RFC's), Change Orders, etc. Travelling to and from project sites upon request of attending project and construction meetings. Involvement in all parts of the project life cycle, to include master planning, design, construction, and closeout. Perform electrical engineering analysis and technical reports supporting District design guidelines. Ensure integration of LED lighting systems, PV, BESS, EV charging, microgrids, and smart controls. Perform other related duties as assigned. Minimum Required Qualifications: Bachelor's Degree in in Electrical Engineering. 10 or more years of professional electrical engineering experience in design, construction, or facilities infrastructure projects. Strong knowledge of California Energy Codes, Title 24 Energy Code, National Electrical Code (NEC), California Code of Regulations Part 11 (Cal Green Code) and applicable electrical engineering standards. Preferred Qualifications: 2 years' experience in Educational Facility Construction. Experience and/or certification in Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS). California Professional Engineering (PE) license in Electrical Engineering.

- V&V Engineer/System Verification Engineer rate- $55/hr Job descriptions: V&V Engineer (Verification & Validation Engineer), Matlab/Simulink Bachelor's Engineering degree in computer science, or related field 9 plus years of experience in system/software testing in Aerospace domain Experience in embedded System/software testing is mandatory Experience in scripting or coding implementing test cases into automation test scripts is mandatory Experience in Flight Controls systems or relevant aerospace systems Experience in Avionics standards like DO-178b or ARP-4754A guidelines Execution of test scripts on test environment and debugging Defect tracking and PR process Experience in data transfer protocols such as A429, CAN, etc Experience in Tools such as DOORS, SVN or MKS Soft Skills Excellent communication and leadership abilities. Ability to manage multiple priorities and deliver within deadlines.

Job Title: Principal Engineer Join our client's team as a Principal Engineer, where you'll be involved in supporting Clinical & Commercial Plant Automation programs and Capital projects, including complex automation initiatives Job Responsibilities Represent the Automation team during project planning, business case development, and cost estimates in partnership with key stakeholders. Estimate manhours and required resources based on project scope. Participate in the preparation and implementation of detailed design and schedule in partnership with Engineering and Project Management. Support post-implementation activities including operationalizing new assets, training the System Owners and Manufacturing team, revising SOPs, and updating asset systems. Ensure compliance to Engineering and Operational standards, specifications, and procedures during project design and implementation Skills Required: Degree in Electrical Engineering, Computer Science, Chemical Engineering, Biotech Engineering, or related life science engineering Experience with Emerson Delta-V DCS system and Rockwell Automation SCADA and PLC Platform. Knowledge of Process Control Network design including network segregation. Experience with System Integration using OPC, Foundation Fieldbus, ProfiBus, and DeviceNet technologies. Compliance with regulatory requirements such as 21 CFR Part 11, S88, S95, and GAMP. Proficient in project management skills and ability to influence and motivate others outside of direct line of authority. About SSi People: With over 26 years of industry experience, SSi People has built its reputation and expertise on putting people first. Everything we do works toward delivering an exceptional experience for our consultants, our clients, and our internal team. Through a genuine commitment to people in everything we do. We have developed refined processes and a stellar internal team to deliver talent quickly. More importantly, we focus on building long-term relationships, not transactions. Putting people first is just what we do w ell.By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from SSi People and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: SSi People Privacy Po licy

Must Have Technical/Functional Skills:- Mechanical engineer in aerospace domain with Manufacturing engineering background Technology Development New Product Introduction In-service reliability tracking and investigations. Non-conforming material review Production modifications Obsolescence management. Work as Technical Lead to groom and guide the offshore team New Product Introduction /Sustaining Project engineering, fulfilling the requirements of Project Engineers, Design Engineers, Mechanical Engineers, and Stress engineers. Develop the Method/Process on how to flow, control and execute the task. Interact with the customer to understand the requirements and propose and implement solutions Design and lead the development of different modules and other release processes Work closely with customer to understand the requirement Data segregation, Triaging Catia Solidworks Roles & Responsibilities Work as Technical Lead to groom and guide the team Interact with the customer to understand the requirements and propose and implement Participating in business requirement discussions and providing key technical inputs Leading the technical deliverables Directly handling technical queries from customer

Kitchell seeks an experienced and dedicated Senior Electrical Engineer to join our Engineering and Architectural Team in our Irvine office and build a long-term career at one of the most innovative and growth-oriented building companies in the United States. Overview As a Senior Electrical Engineer, you will lead the design and analysis of electrical systems for a variety of projects, from concept through construction. This role involves developing technical specifications, ensuring code compliance, supporting construction and commissioning efforts, and contributing to business development initiatives. Location: This role is located in our Sacramento office and will be eligible for a hybrid schedule after a 60 waiting period. Duties and Responsibilities Prepares electrical system designs, including power distribution and lighting design, at the schematic, design development and construction document phases of a project. Analyzes design and construction issues for solutions and/or incorporation. Develops technical specifications as required. Performs design/constructability reviews. Comments on electrical issues, including cost, design and construction technology. Evaluates site and building conditions and prepares technical reports of investigations. Interprets applicable codes for compliance and applies this knowledge to documents prepared and/or reviewed to ascertain compliance with those codes, standards and requirements. Assists in maintaining log of all revisions to standard drawings and specifications, and manages the file containing current specifications and logs of all proposed changes to the standard documents. Assists in performing value engineering analysis and reviews. Assists the estimating department in the development of conceptual and detailed cost projections. Performs commissioning of electrical systems and monitors activities to ensure that construction, installation and operational testing conform to functional specifications and customer requirements. Supports and participates in business development and marketing efforts including the preparation of proposals and presentations for new work. Assists in the development and implementation of department design and document standards. Stamps engineering documents as required. Applies workplace health and safety policies and procedures to daily activities. Executes additional duties and responsibilities as assigned. Education and Experience Bachelor's degree from an accredited four-year college or university in engineering or related field or equivalent experience required. 10 or more years of position related work experience in engineering or related field. Knowledge and Skills Knowledge of applicable codes and standards required. Knowledge of the architecture, engineering and construction management industry is required. Effective computer skills including proficient use of Word, Excel, Outlook, PowerPoint Bluebeam, Revit and specialized software appropriate to professional qualification required; and scheduling database (Project) software preferred. Effective verbal and written communication skills, including the ability to foster and maintain effective interpersonal relationships is required. Effective organization skills, including the ability to prioritize and plan work is required. Ability to gather and interpret technical or abstract data to resolve extraordinarily difficult and uncommon problems is required. Ability to work well under pressure and adapt to frequent change, delays or unexpected events is required. Ability to manage a team of professionals in the production of quality projects delivered on time and within budget is required. Commitment to the values of Kitchell with attention to honesty and integrity, quality of work, customer satisfaction, people development, profitability and managing change is required. License and Certifications State of California Professional Engineer license is required. A valid driver's license with an acceptable motor vehicle record, free from suspensions or restrictions, is required. Travel Requirements This position is office based in our Irvine, CA Regional Office. Travel requirement is based on project needs through out California. Work Environment While performing the duties of this job, the employee must regularly work in an office and or construction environment. Conditions regularly include exposure to outdoor elements, hot/cold temperatures, wet conditions, noise, atmospheric conditions and cramped quarters. The noise level in the work environment is occasionally loud. Must frequently travel. Physical Requirements While performing the duties of this job, the employee must regularly sit, stand, walk, talk or hear and use hands to finger, feel and handle; frequently reach with hands and arms; occasionally climb or balance and stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. Must frequently lift and or move 10 pounds and occasionally lift and or move up to 50 pounds. ABOUT OUR COMPANY Founded in 1950, Kitchell began as a commercial contracting business and over the years developed new talents and enterprises, acquiring complementary businesses and expertise to remain competitive. Today, Kitchell Corporation serves as the holding entity for several companies that are integral to Kitchell's core business, as well as those that operate independently. We provide a wide range of services within the built environment, including general contracting, construction management, development, facilities management, engineering, architecture, and myriad other services. Our employees manage projects from our main offices located in Arizona, California, and Texas. We offer an entrepreneurial environment that fosters personal and professional growth through in-house education programs, formal and informal mentoring, and cross-training opportunities. At Kitchell, we prioritize internal growth and building careers from within. We consistently rank among the top places to work, thanks to our tenured staff and outstanding benefits that are designed to enrich our employees' physical, mental, emotional, and financial well-being. These benefits include company performance bonuses, discretionary stock options, incentive bonuses, health, and life insurance, health savings accounts (HSA) with wellness incentives, flexible spending accounts (FSA), 401(k) plans with a 4% company match, tuition reimbursement, weight loss programs, discounted auto insurance, identity theft protection, rewards programs, and much more. Kitchell is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status. The annual base salary range for this role is currently $125,000 - $175,000. The Company's salary ranges are determined by role, level, location, and alignment with market data. Individual pay is determined through interviews and an assessment of various factors, including job-related skills, relevant education and experience, abilities of the applicant and equity with other team members. The annual base salary range listed here is subject to change at any time, in the Company's discretion, and does not alter in any way the at-will nature of the employment relationship.

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Are you ready to embark on an extraordinary career journey? Look no further than The Austin Company, where greatness is not just a goal, but a way of life. As a leading design, engineering, and construction firm with a rich legacy dating back to 1878, Austin offers unparalleled opportunities for growth, innovation, and professional development. Join our dynamic team and be part of a company that is at the forefront of shaping the future of industries worldwide. With a commitment to excellence, a collaborative work environment, and a passion for delivering exceptional results, Austin empowers its employees to reach their full potential and make a lasting impact. Discover the limitless possibilities that await you at ***************** and embark on a rewarding career journey with Austin. Summary/Objective The Austin Company performs design-build work for industrial and specialized commercial markets. The Electrical Intern actively works with in-house engineers, architects, and construction departments to assist with ongoing functions. Additionally, each intern participates in an interactive intern-specific project requiring coordination amongst the various engineering and architectural design disciplines. Throughout the summer, the interns choose a project, decide a site location, and bring their project idea to life with engineering design and collaboration efforts. Finally, a proposal and presentation are assembled, in which the interns pitch their design proposal to the architectural, engineering, construction and marketing professionals in the office. By the end of the summer internship, students gain an understanding for the project cycle. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions Utilization of Revit, Revizto, Visual Lighting, Bluebeam and Procore to aid in project support. Assists in electrical equipment and device selection and layout, life safety equipment selection and layout, and develops equipment schedules. Performs calculations for specific tasks defined by a discipline mentor. Provides Revit design drawings of sketches prepared by other team members. Participates in departmental and design review meetings. With the assistance of discipline mentor, reads and understands drawings and specifications. For the Intern Project, The Electrical Intern duties are: Coordinates with other construction, architectural and engineering disciplines. Selects appropriate power distribution equipment for the project. Selects appropriate lighting for the project. Provides load, voltage drop, conduit fill and photometric calculations; design and layout for power distribution equipment and lighting. Creates Revit drawings, including one-line diagram, area plans, equipment details. Circuits equipment in Revit to create panel schedules. Conducts quantity take-offs and compiles an estimate of all related electrical components in the project. Aids with the project proposal and presents final design to architectural, engineering, construction and marketing professionals in the office. Required Education and Experience Actively enrolled in a 4 or 5-year degree program in Engineering. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The pay for this position in California is $25.00 per hour. The Austin Company is an EEO and DFWP Employer Austin is wholly owned subsidiary of Kajima.

Project Engineer - Bridge & Transportation Construction We are partnering with a leading heavy civil contractor specializing in transportation and bridge infrastructure to hire a Project Engineer to support the delivery of multiple bridge construction projects throughout the Los Angeles region. This is an excellent opportunity for an engineer looking to gain hands-on experience on complex bridge and structural transportation projects, while building a clear path toward Project Manager and senior leadership roles. Key Responsibilities Support the execution of bridge construction projects, including foundations, substructure, superstructure, and deck work Assist with project planning, scheduling, quantity takeoffs, and cost tracking Manage RFIs, submittals, change orders, and document control Coordinate with Superintendents, inspectors, designers, and subcontractors Track material procurement and subcontractor progress Assist with budget updates, forecasting, and monthly reporting Support quality control, safety compliance, and Caltrans/DOT documentation Participate in constructability reviews and preconstruction planning Required Experience & Qualifications 2-7 years of heavy civil construction experience, ideally on bridge or transportation projects Exposure to bridge structures such as piles, footings, columns, girders, decks, and falsework Experience on public works / Caltrans / DOT projects strongly preferred Bachelor's degree in Civil Engineering, Construction Management, or a related field Strong organizational and communication skills Ability to thrive in a fast-paced, field-driven environment Experience with Procore, Primavera, or similar construction software preferred Why This Opportunity Work on high-profile bridge projects across the Greater Los Angeles area Clear career progression toward Project Manager and Senior Project Engineer roles Exposure to large, complex transportation infrastructure programs Long-term project pipeline and job stability Competitive compensation and comprehensive benefits package

Russell Sigler Inc. is a leading independent distributor in the HVAC industry, specializing in Carrier products for over 50 years. Our mission is to deliver exceptional service and products while fostering a supportive work environment for our employees. Position Summary: Controls Engineer is responsible for controls engineering, programming and service support for commercial control projects. Respond to customer needs by identifying system and product solutions. Assist customers in answering technical control questions. Conduct customer visits, events and training sessions with mechanical engineers, mechanical contractors and building owners. Communicate project changes to team members and customers. Key Duties and Responsibilities: Provide technical sales support to engineers, contractors and building owners Provide controls training to mechanical engineers, contractors, and owners Generate controls proposals that include a detailed scope of work based on project sequence of operations, specification, and drawings in accordance with division standards Create sequence of operations, select bill of materials as well as develop comprehensive bid strategies, design network layouts and produce electrical schematics Perform programming on system and network-level controllers Gather project design changes from the field team and create as-built drawings Follow department marketing strategies, policies, and procedures Create application notes, technical papers, service notes, and training documentation Secondary Duties and Responsibilities: Answer controls technical support calls Adhere to safety standards with a high degree of regard towards employee and subcontractor safety Critical Knowledge and Skills: Read architectural, mechanical, and electrical blueprints Understanding of mechanical systems and basic electrical knowledge Experience with installing programming and commissioning HVAC controllers Understand construction documentation, procedures and construction processes Proficient at using drafting software applications Communicate effectively and work in a team environment Good judgment, planning and multi-tasking skills Education and Experience: AA/AS degree w/2+ years related experience in the HVAC industry or BS degree in mechanical or electrical engineering, or related career field Expected Pay Range: Starting range at $75,000 annum, salary can fluctuate depending on relevant experience. ** Russell Sigler, Inc. (Sigler) is an equal opportunity employer. All applicants will be considered for employment based on merit, qualifications, and business need **