Electrical engineer jobs in Coeur dAlene, ID

REPORTS TO: Project Engineering - Electrical Lead FLSA STATUS: Exempt SUPERVISES: None Benefits Salary range $90,000-$130,000 per year depending on experience High deductible medical, dental, vision, and basic life insurance, including spouse and children (modest payroll deductions) 10 paid holidays per year Vacation - 3 weeks Supplemental leave (used in conjunction with Washington Paid Family & Medical Leave) 401K with matching company funds Quarterly bonus structure Tuition reimbursement ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: JOB DESCRIPTION: The Electrical Project Engineer applies knowledge and experience to manage projects. The position is also responsible for implementing new designs and upgrades to electrical systems. The Engineer will manage multiple projects often from conception thru commissioning and close-out. Projects include capacity, process and reliability improvements for areas throughout the facility. The Electrical Project Engineer's essential functions include: Lead and facilitate cross-functional project teams to develop project scope and requirements Develop and manage project scope, resourcing plan, budget, and schedule Prepare capital authorizations Develop specifications and evaluate technical engineering and equipment bid packages Administer engineering, equipment purchase, and installation contracts Coordinate and manage installations and outages Track and report project performance, schedule, and cost compliance Review design packages and drawings for compliance with contract documents and Kaiser standards Coordinate with internal Operations, Maintenance, Technical, and Engineering resources to achieve project objectives Participate in the final check-out of new installations. This includes factory and site acceptance testing that will assure adherence to functional specifications Assist in trouble-shooting equipment control and electrical systems Support electrical safety initiatives and Kaiser's electrical standards Comply with all Safety, Quality, and Environmental Regulations.

Under the close and immediate supervision of an engineering mentor, Entry Level Engineers perform routine aspects of engineering assignments requiring knowledge and application of basic engineering principles. Key contributions include performing basic calculations, studies, drawing preparation, and providing technical support to construction staff. This role is largely focused on the ongoing development and application of knowledge of commonly-used concepts, practices, and procedures within a particular field. Job Responsibilities * Develops understanding of assigned client standards, policies and procedures by reading and applying specific design guides, standards, systems and applicable engineering codes. * Develops an understanding and complies with Commonwealth Associates quality program. * Supports continuous improvement and change management efforts by proactively presenting leadership with new suggestions around process and practices innovation. * Takes ownership of one's own professional development, striving for high-quality performance; remains self-aware and seeks support, guidance, and mentorship from other more experienced engineers. * Attends internal and external client meetings, conference calls and client site visits accompanied by a mentor. * In collaboration with the Business Development department, represents the company's emerging professional engineers at career fairs as needed. * Supports the needs of the internal project team while gaining basic understanding of external client's main interests, expectations and drivers. * Coordinates with project teams, cross-functional teams and other groups within the company to provide information and assistance as directed. * Works with administrative staff to coordinate tasks and prepare documents. * Collects, assimilates, and manages data for engineering work. * Contributes to preparation of engineering deliverables such as drawings, reports, specifications, and studies of limited scope. * Performs routine research and develops recommendations for equipment and/or materials selection. * Prepares basic engineering calculations following standard methods and principles used in similar engineering analysis. * Understands and works within budgeted hours, schedule, and quality requirements. * Completes expense reports and timesheets in a timely and accurate manner and seeks direction from supervisor when conflicts arise. * Remains aware and demonstrates understanding of project scope management.

Century West Engineering, a premier Northwest engineering consulting firm, is looking for an Electrical Engineer to join our team. As an Electrical Project Engineer, you will work on a variety of municipal projects including public and private projects involving water systems, wastewater systems, street improvements, and park improvements. The qualified candidate will provide excellence in the design of electrical systems and integrate these designs to deliver a combined package. We are looking for a candidate who enjoys problem solving, working smart and hard on important projects, in collaborative teams with multiple stakeholders, and who has a proven record of getting results. This position will report to the Electrical Department Manager and may be located in our Coeur d'Alene, Idaho, Spokane, Washington, or Sandpoint, Idaho offices. Benefits: 2 to 4 weeks of vacation depending on experience 1 hour of sick leave for every 30 hours worked 8 paid holidays 3 days paid bereavement leave, as needed 401k retirement account match Health (PPO and HSA options), dental, and vision insurance fully covered for full-time employees and available for family and dependents Life and disability insurance Employee assistance program Bonus program Professional training and development opportunities Reimbursement for continuing education Flexible schedule Duties and Responsibilities: Develop electrical site plans, electrical plan drawings, lighting plan drawings, one-line diagrams, wiring diagrams, network diagrams, electrical equipment layout and elevation drawings, electrical schedules, P&IDs, and prepare electrical specifications Prepare and review electrical construction cost estimates Coordinate with and review design work from other engineers and technicians Provide submittal reviews and electrical construction oversite Review project scope and estimates Track and adhere to project scope and budget Qualifications: Bachelor's degree in electrical engineering or appropriate discipline Professional Electrical Engineer in Idaho or Washinton, or ability to apply for reciprocity Have 4+ years of relevant experience in power systems, lighting, and control systems Proficient with Microsoft Office Suite, Adobe Acrobat, and Bluebeam Revu Experience with design/knowledge related to PLCs, MCCs, VFDs, Standby Power Systems, and SCADA systems preferred Experience with power analysis software (ETAP, SKM, EasyPower) and lighting analysis software (Visual, Agi32) preferred An Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected status.

We are always looking forward to receiving resumes from candidates with skills and technical experience in the aerospace sector. We are very happy to receive speculative resumes if you are looking for a career change within the aerospace industry. Our flexible recruitment services will provide you with the following employment options: * Contract * Contract to Direct * Direct Our experienced consultants are experts in their field and are well placed to advise you on all aspects of aerospace recruitment opportunities, and employment trends.

Company Background: Washington Equipment Manufacturing Company, Inc. (WEMCO, Inc.) is a contract manufacturer that specializes in the design, engineering, and manufacturing of productivity-enhancing solutions, such as overhead cranes for material handling, automated aerospace tooling, agricultural equipment, and custom machinery used in multiple industries around the world. WEMCOs facility is fully integrated with the capability to perform nearly all services in-house. This includes design, engineering, welding, machining, painting, assembly, testing, and installation of complex machinery. This is not a boring office job or consulting firm. Your designs will be built in-house by industry experts. Visit our website to view some of our work **************** Job Purpose: As an Electrical Engineer, you will utilize computer-aided software to review, modify, and design electrical systems while simultaneously validating and improving the performance of electromechanical equipment and components. You will work under the direction of the company Vice President, and will join a team of mechanical, structural, and control systems engineers that continue to grow our company and expand our capabilities. Job Responsibilities: Design and evaluate electromechanical systems by applying principles of mechanics, electrical systems, hydraulics, pneumatics, and other power systems Develop and review control systems by studying customer requirements, researching and testing manufacturing and assembly methods and materials, and soliciting observations from operators Interact with electrical engineers and staff members to identify, define, and resolve design or performance issues with products Create test procedures and provide technical assistance during equipment assembly and commissioning Execute technical assignments with the ability to integrate systems adhering to schedule and cost considerations Perform root cause analysis for failure investigations and other data analysis tasks Write periodic reports or presentations for customers on specific projects Conduct electrical progress work inspections on a continuous basis along with complete electrical installation checkout to ensure quality, codes, standards, and specifications are met before turnover Support technical coordination of lock-out/tag-out program activities Coordinate with Mechanical Engineers and craft workers to solve drawing issues or and provide information necessary for proper wiring or installation of electrical equipment Coordinate and fulfill procurement as needed for electrical panel and system fabrication and assembly Provide engineering information by answering questions and requests that are technical in nature Maintain product and company reputation by complying with government regulations Create and review O&M manuals for all designed equipment Provide tracking and reporting to help plan, develop, and mentor project teams on the implementation of recovery plans as necessary Develop and maintain constructive and cooperative interpersonal working relationships with others Create drawings for manufacturability using standard drafting practices within your assigned area Diagnose problems, order appropriate parts, and design solutions to remedy project complications Must maintain a clean driving record since you may be asked to drive a company vehicle at times Be willing to travel for short periods of time to manage project assignments Be willing to study and learn relevant industry standard requirements such as ISO9001, AS9100, NCCCO, OSHA, ANSI, ASME, CMAA, AWS, IBC, ASCE, ASME, as well as any other related specifications needed to perform industry-accepted designs and equipment Job Requirements: Bachelor of Science in Electrical Engineering Professional Engineering license in Electrical Engineering 3-5 years experience working in industrial automation Strong background in mechanical, hydraulic and pneumatic systems Strong AutoCAD skills, experience with Autodesk Inventor preferred Strong Programming Skills Must be able to work autonomously without direct oversight when necessary Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications Has or can acquire a US Passport with no travel restrictions Benefits: 401K Retirement Plan Medical Insurance Dental Insurance Vision Insurance Supplemental insurance options through Colonial Life Paid Time Off Holiday Pay Employee Referral Program

Build the future, spark innovation and align your career with purpose. McKinstry is innovating the waste and climate harm out of the built environment and creating lasting impact. Together, we're building a thriving planet. Buildings are a leading contributor to the climate crisis, generating nearly 40% of total global energy-related carbon emissions. We're making a lasting impact on our industry and within our communities by addressing the climate, affordability and equity crises through: * renewables and energy services * engineering and design * construction and facility services To get where we're going, we need big thinkers, problem solvers and collaborative mindsets. Does that sound like you? The Opportunity with McKinstry Our engineering team is on the hunt for a Principal Electrical Engineer to lead the continued growth of our electrical engineering practice in the Buildings (new construction and existing building), DER and Data Center sectors. In this role, you will develop, sell, and lead the delivery of complex projects while also growing the team. You will act as a thought leader and subject matter expert internally and represent McKinstry as a respected name in the industry. * Lead delivery of complex projects for specific offerings/verticals/clients. * Leads development, with internal and external partners, of best-in-class design delivery. * Act as a thought-leader and subject matter expert internally and represents McKinstry as a respected name in the industry. * Lead strategic Engineering & Design group initiatives. * Engage in all aspects of business development and sales. * Develop and build strong customer relationships. * Build and execute on appropriate sales and proposal strategies. * Grow the electrical team and support recruiting by organizing and leading interviews for higher-level positions. What You Need to Succeed at McKinstry: * Four-year college degree required; master's degree or other advanced degree preferred. * Professional Engineering License required. * Minimum 18+ years of overall professional experience. * Project Management: 10+ years. * People Management: 10+ years. * Demonstrated proficiency in the following: * Design of complex power and other building systems including generator plants, medium voltage distribution, uninterruptible power systems, lighting, fire alarm, and grounding * Familiarity with industry standard software (Revit, SKM, ETAP, Easy Power, etc.) to review models and studies such as: Load flow studies, fault calculations, Arc Flash, overcurrent coordination studies, duct bank calculations, harmonic studies, etc * Strong public speaking ability. * Demonstrated executive presence. * Proven team leadership capabilities. * Strategic thinking and decision-making skills. PeopleFirst Benefits When it comes to the basics, we have you covered: * Competitive pay * 401(k) with employer match and profit-sharing plan * Paid time off and holidays * Comprehensive medical, prescription, dental, and vision with low or zero deductible options and low out of pocket maximums People come first at McKinstry, and we go beyond the basic benefits with: * Family formation benefits, including adoption and IVF assistance. * Up to 16 weeks paid parental leave. * Transgender inclusive benefits * Commuter benefits * Pet insurance * "Building Good" paid community service time. * Learning and advancement opportunities via McKinstry University. * McKinstry Moves onsite gyms or reimbursement for remote workers. See benefit plan documents for complete details. If you're driven by our vision to build a thriving planet together, McKinstry is the place to build your career. The pay range for this position is $157,900 - $240,100 per year; however, base pay offered may vary depending on job-related knowledge, skills, and experience. Base pay information is based on market location. A bonus may be provided as part of the compensation package, in addition to a full range of medical, financial, and/or other benefits, dependent on the position offered. The McKinstry group of companies are equal opportunity employers. We are committed to providing equal employment opportunities to all employees and qualified applicants without regard to sex, gender identity, sexual orientation, age, race, color, creed, marital status, national origin, disability, veteran status, genetic information or any other basis protected by law. This policy applies to all terms and conditions of employment including, but not limited to employment, advancement, assignment, and training. This commitment to Equal Employment Opportunity is made equally as a social responsibility and as an economic and business necessity. McKinstry is a drug-free workplace. Employment is contingent upon successfully passing a pre-employment drug and alcohol test, complying with the requirements of the Immigration Reform and Control Act and a Confidentiality Agreement, in addition to successful outcomes of background and reference checks. Applicants for this role will only be considered if they possess current US Work Authorization, and do not require employer-sponsored VISA support to begin or remain in this role.

Job DescriptionDescription: Job purpose At Shredfast Inc., an Electrical Technician - Tier 1 works under the supervision of the Electrical Department Lead, performing installations, repairs and replacement of a variety of electrical components integrated into production builds. This position must demonstrate an attention to detail and a strong ability to focus. Wage 20.00 - 22.50 hr/ DOE Duties and responsibilities Assemble, install, and test electrical components Follow service guides, schematics and manufacturer specifications Repair or replace defective components Perform basic electrical parts preparation work Reassemble and test equipment after equipment repairs are completed Perform basic electrical truck chassis preparation Clean work area Other duties as assigned Qualifications A general understanding of mobile electronics required Must be able to correctly identify color-coded components Have good verbal and written communication skills Knowledge of various electrical connectors Basic hydraulic and pneumatic knowledge preferred Previous experience with car stereo/security installations preferred Read a tape measure Ability to use basic hand tools, drills & air tools Must be able to lift up to 50 pounds when moving heavy items such as large spools of electrical wire and boxes of components, and be able to sit, stand, crouch and kneel Must be self-motivated and able to stay on task with good attention to detail Must maintain a clean and organized work environment Must have reliable transportation for work commute Must be 18 years of age or older Tools are provided Other 7:00 a.m. - 3:30 p.m. Opportunity to make additional wages with overtime Additional Information Shredfast, Inc. offers medical, dental, vision, 401k, vacation hours and company sponsored events. Shredfast, Inc. is an at-will company; however a probationary period applies for benefits. All applicants must be able to pass a pre-employment drug screen and background check. Requirements:

The Maintenance Supervisor - Electrical is responsible for supervising and directing routine and emergency electrical maintenance for all areas of the Lucky Friday. This includes scheduling, coordinating, directing, and supervising electricians performing maintenance activities requiring troubleshooting, inspections, testing and repairs of all electronic and electrical equipment and facilities. This also includes coordinating electrical department activities with mine and concentrator operations, and other maintenance operations ensuring that adequate scheduling needs for parts, materials and manpower to generate timely repair has been met. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. * Ensure all electrical inspections, testing and repairs are performed and recorded as required by MSHA. Administer activities to ensure compliance with all Federal and State laws, company policies and procedures and the collective bargaining agreement. * Manage the work activities of hourly electricians to effectively implement electrical maintenance plans, ensuring safe work behaviors and practices. * Ensure timely completion of scheduled maintenance and repair of electronic and electrical equipment and facilities to maximize availability. * Analyze operational/maintenance requirements and adjust priorities as required. Monitor proper operation and safety of electrical systems throughout the mine. * Communicate status of work activities as needed with department manager or other departments. Manage and coordinate the work of electrical contractors. Prepare or review reports as required to evaluate and document activities. * Coordinate projects and responsibilities assigned to the department. * Responsible for electrical employee and contractor performance in the areas of safety, environmental, efficiency, productivity, quality, planning, and cost. * Plan, organize, manage, and supervise all electrical and instrumentation maintenance operations. * Responsible for the reliability and integrity of all electrical systems including mine and concentrator power distribution, motors, transformers, instrumentation, sensors/analyzers, PLC's, Leaky Feeder, electrical special projects, radio coverage, etc. * Inspect daily operations and projects in process and upon completion to ensure the quality and reliability of work performed. * Participate in Risk Assessment activities as required. * Participate in the development of Standard Operating Procedures (SOP's) as required. * Completes required paperwork, including shift reports, requests for materials, timecards, etc. * Attend meetings as required, including training and department meetings. * Performs activities of workers supervised, per the bargaining agreement, in the case of an emergency, when necessary to instruct employees in their duties, for minor work that is unreasonable to assign to a bargaining unit employee, or to provide training for salaried personnel. * Follows and understands MSHA rules and regulations, environmental rules and regulations, SOP and work area instructions, participates in safety and environmental activities. Leads by example by adhering to rules and regulations and ensuring compliance to rules and regulations established by the Lucky Friday. * Must be able to work and communicate with other members of the work team. * Comply with applicable environmental laws and regulations. Conducts activities and work in an environmentally responsible manner. Is aware of procedures to minimize impacts to the environment. SUPERVISORY RESPONSIBILITIES Mine Electricians Directly supervises hourly electrical department employees. Carries out supervisory responsibilities in accordance with Lucky Friday's policies, applicable laws, and the bargaining agreement. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Participate in employee relations/disciplinary meetings as required, including grievance meetings for hourly employees. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Five to seven years' experience in mining or a related industry or degree in Electrical or related discipline, or an equivalent combination of experience and education. Previous experience in supervising and directing the work of others. Journeyman Electrician certification in Idaho or a reciprocal state preferred. Must be computer literate and proficient in Microsoft Office, including Excel, Word, and Outlook. Prior experience in an underground mine is preferred.

At Jacobs, we're not just building structures, we're helping our clients innovate and grow by designing, engineering, and executing the construction of their state-of-the-art facilities that are changing our world. We push the limits of what's possible to make the world smarter, more connected, and more sustainable. We're looking for an Electrical Designer for our Corvallis, Oregon office. This person can work out of our Corvallis Jacobs office or any of the Northwest Jacobs offices. Join us and you'll have the chance to work on water and wastewater treatment, conveyance, and on river facilities projects where you will play a role in the entire design process including but not limited to preliminary assessments, concept creation, design, problem resolution, drawing and specification production. Come be a part of a vibrant, dynamic team that delivers world class designs for well-known clients around the world, while living in a small community with a family atmosphere. - Associate's degree (AA) Degree in Computer Aided Drafting and Design or similar technical degree. - Trained in Autodesk Autocad or Bentley Microstation software. - At least 5 years working experience in Revit or other 3D modeling software - Prior experience with BIM processes and parametric design software Autodesk or Bentley - Proficiency setting up views, view templates, sheets, and schedules for construction documents. - Proficiency printing full sets of construction documents and performing PDF quality control reviews in Bluebeam. - Proficiency with design coordinating with other disciplines parametric and geometric content in 3D. Ideally, You'll Also Have: - Autodesk Revit Certified Professional - Prior experience actively designing low voltage and communications systems for buildings - Experience in electrical and low voltage systems design - Proficiency in AutoCAD and MicroStation Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $63,795 to - $164,301 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0855 Electronics Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857056-0855-CYBER Control number 852987000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Use engineering manuals, standard publications, and technical material to obtain information and pertinent data for use by higher level engineers, contractors and/or customers. * Keep abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments. * Perform duties in support of the installation, operations, and maintenance of weapon systems, subsystems, facilities, machinery, and/or support equipment. * Perform developmental assignments in the application of established principles, techniques, methods, and procedures of professional electronics engineering in the area of installation, operations, and maintenance. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: At least one year of specialized experience equivalent to at least the GS-09 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Modeling and simulation professional theories, concepts, principles, techniques, and practices of computer engineering, electronics engineering and/or computer science. GS-12: At least one year of specialized experience equivalent to at least the GS-11 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Leading and/or performing engineering work involving electronic circuits, circuit elements and equipment systems; applying a number of diverse electronics engineering practices, techniques and processes to identify and resolve complex engineering issues; supporting the planning, testing and troubleshooting of electronics engineering systems or devices; and, developing computer aided engineering analysis and tools in support of planning and designing applications. GS-13: At least one year of specialized experience equivalent to at least the GS-12 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-14: At least one year of specialized experience equivalent to at least the GS-13 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-15: At least one year of specialized experience equivalent to at least the GS-14 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of electronics engineering concepts, principles, methods, techniques, and standard engineering practices to perform moderately difficult or relatively limited phases of a larger and more complex installation, operations, and maintenance engineering project. * Knowledge of computer aided design and drafting (CADD) programs to perform design and drafting assignments, as well as other computer applications used in support of plans, analysis, and project reports. * Skill in applying the principles, concepts, and practices of the occupation sufficient to perform limited assignments in the field of electronics engineering. * Ability to communicate factual and procedural information clearly, orally and in writing. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

careersite--jobs--form-overlay#show FormOverlay" data-careersite--jobs--form-overlay-target="cover Button"> Apply for this job blocks--cover--scroll#handle ScrollDown" title="Scroll to content"> May 8, 2025 Sr. Electrical Design Engineer - Electrical and Renewables Responsibilities * Assist the sales team in client meetings and presentations * Manage engineering project teammates and provide coaching and mentoring in their career development * Create, manage, and oversee the budgets for the Investment Grade Audits and/or Pre-Construction Services Proposals * Create, manage, and develop the scope of work for the Facility Improvement Measures (FIMs) while clearly communicating with the client regarding the scope of work. Example FIMs may include: * Photovoltaic (PV) Arrays with net metering * PV arrays with battery energy storage systems (BESS) * Building electrical service modifications * Emergency Power Systems * Work with the assigned construction manager to build the Guaranteed Maximum Construction Costs (GMAX) for projects * Review the assumptions and methodologies used in building the guaranteed energy savings, and review and understand the IPMVP used for the post retrofit measurements that will be used to prove out the energy savings * Manage project schedules and communicate changes in a dynamic environment * Maintain clear and concise verbal and written communications with the client * Provide preliminary and final designs for the project's FIMs Skills and Qualifications * Strong written communication and presentation skills * Willing to work and thrive in team atmosphere Education and Experience * Bachelor of Science in Electrical Engineering from an ABET accredited program or equivalent required * PE required. * Proficient in Revit. * 7 to 15 years of experience in Building Electrical Systems Design, Energy Services Performance Contracting, or Energy Retrofit Design/Build project development required. All employees are subject to a pre-employment drug screen. Affirmative Action/EEO statement As an Affirmative Action, Equal Opportunity Employer, Apollo Mechanical Contractors "Apollo" ensures that no applicant for employment or employee of Apollo is denied equal opportunity because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability (mental or physical), genetic information, veteran status, or any other characteristic any characteristic of his or her relatives, friends, or associates. All employees are subject to a pre-employment drug screen. Please apply online at ************************** or submit a resume to ******************** Department Engineers Role Electrical Design Engineer (Senior) Locations Kennewick, Renton, Spokane About Apollo Mechanical Contractors Apollo Mechanical Contractors is a Native American-owned business that officially began operations in 1981 under the guidance and vision of owner Bruce Ratchford. Apollo is based in Kennewick, Washington, performing Full Mechanical projects across the United States and around the world. Apollo employs over 2000 people, with annual revenues of over $600 Million. Apollo Sheet Metal officially began operations in 1981, building on a vision that originated in the mid-1970s by owner Bruce Ratchford. With a decade of experience and expertise in mechanical design and business management, Mr. Ratchford incorporated Apollo in Richland Washington, to serve the Tri-Cities' construction needs. Since 1981, Apollo has expanded its market to include locations across the United States and multiple countries. Apollo has progressively grown larger than its original scope and has expanded its operations to specialize in mechanical construction for correctional facilities, hospitals, laboratories, high tech data centers, schools, and industrial facilities. careersite--jobs--form-overlay#show FormOverlay">Apply for this job Engineers · Kennewick, Renton, Spokane Sr. Electrical Design Engineer Loading application form jobs--overlay#close Overlay">

Design a career and build your future... Because it matters! Engineering Intern - Electrical McMillen, Inc. is seeking motivated and detail-oriented Engineering Interns to join our team for Summer 2026. This internship offers valuable hands-on experience supporting real-world projects in electrical engineering. Interns will collaborate with experienced engineers and project teams, gaining both technical expertise and professional development in a supportive, team-oriented environment. Available Opportunities: * Structural Engineering - Boise, ID and Spokane, WA Key Responsibilities: * Assist engineers with design, analysis, and technical calculations for ongoing projects. * Support preparation of drawings, models, and specifications using engineering software (e.g., AutoCAD, Civil 3D, Revit, MATLAB, or discipline-specific tools). * Participate in fieldwork, site visits, inspections, and testing as needed. * Collect, organize, and analyze project data and prepare technical reports or documentation. * Collaborate with project teams to develop solutions to engineering challenges. * Ensure compliance with applicable codes, standards, and company procedures. * Provide general project support, including research, documentation, and administrative tasks as assigned. Qualifications: * Currently pursuing a Bachelor's or Master's degree in Civil, Geotechnical, Electrical, or Structural Engineering (or a related field). * Strong academic background with coursework relevant to the internship focus area. * Proficiency with Microsoft Office Suite; exposure to engineering software is a plus. * Strong analytical, problem-solving, and communication skills. * Ability to work independently and as part of a team. * Willingness to learn and take initiative on assigned tasks. Benefits of Internship: * Exposure to real-world engineering projects and professional practices. * Mentorship and guidance from experienced engineers. * Opportunity to apply academic knowledge to practical applications. * Development of technical, organizational, and teamwork skills. Who we are: McMillen, Inc. designs and builds solutions that shape the future of water resources. As an employee-owned firm, we take pride in every project because we know our work truly matters. Our people thrive on solving complex challenges, pushing boundaries, and refining their craft. We don't look for the complacent or the comfortable. We seek problem solvers, innovators, and experts who are always striving to be better. We support continuous learning, cutting-edge technology, and a balanced work-life environment so our employees can build careers they're proud of. We are focused in the dams, energy, fisheries, natural resources, and infrastructure markets. With staff across the United States, Canada, Europe, and beyond, we bring global best practices to our clients. Our people integrate engineering, environmental, and construction expertise to deliver practical, results-driven outcomes. From concept to completion, projects are guided through feasibility studies, permitting, design, construction, and commissioning, ensuring technical precision and real-world functionality. EEO: McMillen, Inc. is an EEO/Affirmative Action Employer and will make all employment related decisions without race, color, religion, sex, national origin, disability or protected veteran status. Visa sponsorship, including renewal during employment, will not be provided for this position. No recruiters, please. Equal Opportunity Employer, including disabled and veterans.

Job Description Protection & Control Engineer/Technician - Field Testing & Commissioning Travel-Heavy Field Role - Up to 80% Join a leading team supporting high-voltage substation projects across transmission, distribution, and generation environments. We're looking for Protection & Control Field Testing Engineers at all experience levels to perform hands-on testing, commissioning, troubleshooting, and documentation of critical P&C systems. Candidates should expect five 10-hour workdays per week. What You'll Do: Test and commission P&C systems on high-voltage substations (15 kV - 500 kV) Perform protective relay testing (SEL, GE, Basler, Beckwith) with Omicron or Doble test sets Execute CT/PT verification, relay calibration, control scheme testing, and dynamic/static testing Interpret electrical drawings, schematics, and logic diagrams; produce detailed field reports Support Project Leads/Field Supervisors and manage clerical/project documentation What You Bring: 5+ years in substation field testing (breakers, transformers, instrument transformers, P&C systems) Proficiency with relay families: SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90/D60, etc. Experience with NETA, IEEE, NFPA, and related standards Knowledge of test software: ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator Quickset Ability to travel extensively (up to 80%) and lift 50+ lbs Preferred: Bachelor's in Electrical Engineering/Electrical Technology Electromechanical relay testing and high-voltage commissioning experience (CTs, CCVTs, PLC/SCADA, DC systems) IEC 61850 testing and commissioning experience Competitive pay and growth opportunities for skilled P&C engineers. Step into a role where every test, every relay, and every report matters.

Inland Empire Paper Company, operating in Millwood Washington since 1911, upholds a proud tradition as an industry leading supplier of groundwood specialty papers through highly efficient production methods, first-in-class customer service, and market defining employee capabilities. Job Description Inland Empire Paper Company seeks an experienced Engineer to join our Mill Production Leadership team. Project Management: Define, design and manage engineering projects for equipment and infrastructure including developing and reporting on budget elements and time management; oversee contractors/workers for efficient project performance; accountable for budget. Process Optimization: Develop/upgrade processes to maximize capacity utilization, minimize cost and increase performance while maintaining environmental protection; includes conducting process development experiments, research and assessment of potential technology, supervising implementation. Facilitator: Works closely with the mill leadership group including Maintenance Manager, department superintendents and supervisors as well as operators to provide daily manufacturing technical support, trouble shooting and problem solving to improve production efficiencies, output and safety of plant. Qualifications Bachelor's degree in Mechanical or Industrial Engineering or related field. Minimum 5 years field/plant work and supervisory experience preferred. Strong analytical skills to organize, interpret and draw conclusions from data. Ability to communicate diplomatically and effectively with plant operations, maintenance and/or technical advisors, outside vendors, suppliers and consultants to solve problems and execute solutions. Excellent organizational skills and ability to handle overall management of engineering projects. Computer proficiency in Microsoft Office, engineering software (AutoCAD or similar); experience with distributed control systems (DCS) helpful. Demonstrated leadership skills especially related to change management. Knowledge of pulp and paper manufacturing desired, but not required. Occasional weekend on-call duty or occasional off hours needs to cover 24 hour/7day per week operation. Additional Information The Plant & Project Engineer is a salaried position. Pay range is $90k to $120k per year depending on experience and education. Inland Empire Paper Company continues to offer excellent benefits to employees and their families including medical, dental, vision, life insurance, 401(k) retirement plan, 13 paid holidays per year and 2 weeks of vacation to start (pro-rated first year based on hire date). IEP is a smoke-free and drug-free (including cannabis-free) facility running 24/7. All job offers and subsequent employment are contingent upon a drug screen and background check. Your application to this posting is deemed to be your consent to the collection, use and necessary disclosure of personal information for the purposes of recruitment. Privacy of all applicants and the confidentiality of personal information are respected. Thank you to all applicants for your interest and effort in applying for this position; however, only candidates selected for interviews will be contacted. To learn more about IEP visit our website: *************

Jubilant HollisterStier LLC, Spokane's Largest Manufacturing Company, and well-established member of the business community, provides a complete range of services to support the pharmaceutical and biopharmaceutical industries. Jubilant HollisterStier is a nationally recognized contract manufacturer of sterile injectable vials, and lyophilized products. The Allergy business is a worldwide leader in the manufacture of allergenic extracts, targeted primarily at treating allergies and asthma. Jubilant HollisterStier is a proud member of the Jubilant Pharma family. Our Promise: Caring, Sharing, Growing We will, with the utmost care for the environment and society, continue to enhance value for our customers and stakeholders by providing innovative products and economically efficient solutions' through growth, cost effectiveness and wise investment of resources. Job Description: The primary function of the Project Engineer I is to participate on project teams that are responsible for the design, acquisition, installation and upgrade of critical systems and equipment used in the manufacture of pharmaceutical products. The Engineer I assumes responsibility and accountability for lower level capital and expense engineering projects involving facility or production equipment, cost reduction, process improvement, cGMP upgrades, etc. The Project Engineer II/III provides pharmaceutical engineering knowledge primarily in the area of facility engineering. This position will manage large-scale projects and multi-disciplinary project teams. The engineer will also contribute technical direction for complex projects and exhibit clear communication skills with all levels of employees. This individual will be recognized as knowledgeable in multiple areas of facility pharmaceutical engineering and help provide leadership and guidance to others. * Assumes responsibility and accountability for lower level capital and expense engineering projects involving facility or production equipment, cost reduction, process improvement, cGMP upgrades, etc. Projects will require skills such as Engineering calculations, specifications and other technical writing skills, cost estimating, equipment acquisition scheduling, cGMP knowledge, excellent interpersonal skills and documentation skill, et. Provides engineering support of small portions of capital and expense projects from financial justification, to start-up and through to completion. * Incumbent shall possess practical knowledge in an engineering technical field such as Mechanical, Electrical, Chemical, Controls, or Manufacturing Technology. This includes the ability to interpret detailed Engineering drawings, specifications, logic diagrams, schematics, verbal and written instructions. * Responsible for the proper use of cGMP and Engineering documentation systems. Examples include electronic SOP documentation management system, training records, change control system, engineering drawings, validation documentation, etc. Project Engineer II (In addition to the above): * Provides technical support of engineering facility projects including facility and utility expansion, compliance upgrades, cost reduction, contract manufacturing, process improvements, construction projects, etc. * Through education and experience contributes expertise in the area of facility engineering. This includes design, modification and troubleshooting pharmaceutical systems such as HVAC, Clean Steam, WFI, electrical and knowledge of pharmaceutical construction methods. * Is responsible for contributing knowledge of regulatory requirements for the facility and processes to ensure compliance to local, state, federal and international regulatory agencies. * With slight supervision/assistance, manages capital and expense facility projects in a manner that is compliant with the "Project Management Guidelines" system. This system includes methods for scheduling, budgeting, meeting management, teamwork, communication, and documentation of a multi-departmental project team. * Must work effectively with various internal and external customers on a daily basis. Internal customers may include departments such as Maintenance, Quality Assurance, Manufacturing, Validation, Finance, etc. External interactions will include officials from local, state or federal regulatory agencies, A&E firms, construction firms, vendors, equipment manufacturers, etc. * Participates in the compliance to both short-term and long-term company objectives as defined by upper management. * Development of detailed specifications and RFQs to be used by A&E firms, contractors or equipment manufactures to accurately quote on projects being pursued by the company. * Responsible for using systems of engineering documentation required by regulatory agencies and in compliance with generally accepted engineering guidelines, SOPs, or quality standards. Project Engineer III (In addition to the above): * Autonomously manages major capital and expense facility projects in a manner that is compliant with the "Project Management Guidelines" system. This system includes methods for scheduling, budgeting, meeting management, teamwork, communication, and documentation of a multi-departmental project team Qualifications: * Bachelors of Science in Mechanical, Electrical, Chemical or related Engineering field required. * Pharmaceutical and FDA Regulated Industry experience desired. * Microsoft Word, Excel and PowerPoint required. Microsoft Project desired. * Mechanical aptitude desired. * Exposure to allergens required * Working in aseptic areas required * Working in confined spaces required * Prolonged sitting and standing required Project Engineer II (In addition to the above): * 3+ years of project management and/or project engineering * AutoCAD desired * Pharmaceutical Facility/Systems experience desired * Project Management knowledge required * ISPE Baseline Guides experience required * Ability to lift 40 lbs. unassisted required Project Engineer III (In addition to the above): * 7+ years of project management and/or project engineering Shift: Weekday Days, Monday-Friday Compensation & Benefits: This is an on-site, full-time position located in Spokane, WA. Hiring Wage: * Project Engineer I: $81,825.00- 120,000 annually depending on experience, with opportunity for growth, promotion and annual raises. Midpoint and above is reserved for employees who have longevity with Jubilant HollisterStier and consistently exhibit outstanding performance over a period of time in the role * Project Engineer II: $89,250.00 - 130,900 annually depending on experience, with opportunity for growth, promotion and annual raises. Midpoint and above is reserved for employees who have longevity with Jubilant HollisterStier and consistently exhibit outstanding performance over a period of time in the role * Project Engineer III: $102,075.00 - 149,700 annually depending on experience, with opportunity for growth, promotion and annual raises. Midpoint and above is reserved for employees who have longevity with Jubilant HollisterStier and consistently exhibit outstanding performance over a period of time in the role * Medical, Dental, Vision, Flexible Spending and Health Savings Accounts * Life, AD&D, Short and Long Term Disability * 401(k) with company match * Generous paid time off plan * Employee Assistance Program Unlock your potential with Jubilant HollisterStier! If you're seeking a dynamic and rewarding career, we welcome your application today! ******************************** * Please click on the Spokane, Wa. Link* Jubilant HollisterStier is an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you require assistance applying for a position, please contact our HR Department at: ******************************

DCI Engineers - Coeur d'Alene, ID Jumpstart your civil engineering career as a Civil Project Engineer with DCI Engineers in our Coeur d'Alene, ID office. Work on grading, drainage, utilities, and road projects, collaborate with experienced engineers, and gain hands-on experience while growing your skills in a supportive and innovative environment. What You'll Do: As a Civil Project Engineer, you will work on site development projects and collaborate with multi-disciplinary teams to deliver high-quality designs: Perform site development design: grading, drainage, sewer, water, erosion control, and road design (including profile layouts) Collaborate with engineering and drafting teams to coordinate design details and construction document requirements Plan, schedule, and conduct or coordinate detailed phases of engineering work Attend design meetings, as directed by the Project Manager Review submittals, prepare technical reports, perform routine conveyance calculations, and write observation reports What You Bring To succeed as a Civil Project Engineer, you should bring the following skills and experiences: Minimum 1 year of civil engineering experience Experience with grading, stormwater management, and utility design Familiarity with stormwater modeling and technical information reports Strong time management skills and ability to handle multiple projects simultaneously Desire to provide excellent service and build client relationships Effective communication skills with clients and project teams Civil Engineering degree from an ABET-accredited university Why DCI Engineers At DCI Engineers, you'll find more than just a job - you'll join a team that values collaboration, innovation, and a lifestyle you crave. With 20+ offices across the United States and 35+ years of experience, we've built a firm that challenges employees to step outside the box, provide creative solutions, and deliver exceptional value to projects. We foster a supportive and entrepreneurial culture, where mentorship, professional growth, and work/life balance are a priority. Your time outside of work fuels your productivity, creativity, and professional development, and we encourage our employees to pursue it. Compensation & Benefits Competitive salary + overtime earning opportunities Company-paid medical, dental, and vision insurance Tax-advantaged savings account options Company-paid Life, AD&D, and Long-Term Disability Voluntary Short-Term Disability, Life, AD&D, and supplemental coverage 401(k) with annual company contribution 8 paid holidays (including 1 floating holiday) Paid vacation and sick leave Paid parental leave Commuter benefits (where available) Health & Fitness Program Cell phone benefit Seminar and licensing reimbursements

H2E does the right thing for industrial clients and team members. The result is world-class electrical engineering, process and design. We work with Mining, Light Metals, Hydro Electric, Cement, Aggregates, WWTP, Utilities, DOE, Manufacturing and Wood Products. We are currently looking for a Staff Drafter to work and grow with us at our Liberty Lake, WA headquarters. About Your Work: You will work with engineers, designers and clients to design industrial Electrical Engineering projects in Power and Controls/Automation. You'll have the opportunity to automate factories, saw mills, mines, manufacturing plants and hydroelectric facilities. Your creativity is required. The best candidates possess functional knowledge of CAD, drawing preparation and data manipulation skills. The Staff Drafter will work with engineers, designers and project managers to support project related activities and the design department. Essential Responsibilities Technical Provides electrical drafting/design services to meet customer specifications, drawings, and control & power system requirements Working from instructions, vendor or client drawings, proposals, specifications, red-line drawings and other information provided by engineers and/or clients, produces 2D/3D drawings using standard AutoCAD, AutoCAD Electrical and the Architecture, Engineering & Construction (AEC) Collection, such as: Plot plans, general arrangements, cable routing, grounding, lighting plans, site electrical plans, single line diagrams, load calculations, panel layouts, wiring diagrams, cable and conduit schedules and other electrical plans, details, sizing and layout Detailed industrial control panel layouts, bills of material, schematics, wiring diagrams, PLC I/O drawings, Network communication, P&IDs, hardwired interlock, block diagrams, and general details Assembling documentation packages and providing estimates, schedules, material lists, design concepts, design specifications, design drawings and other documentation for facilities which are reviewed by an Electrical Engineer and/or Project Manager Collaborating with design & engineering staff and other personnel to find solutions throughout the design process Performs fieldwork and technical research by visiting construction/plant sites and fabrication shops during the project design phase on an as required basis Leadership / H2E & Project Management Has or will obtain a working knowledge of project execution concepts and practices Assists with completing projects within scope, on time and on budget with safety and quality requirements met Monitors project execution via project schedules Communications Assists with technical guidance, training, and development of staff through peer review of project work involving electrical design with quality and accuracy Collaborates with engineering staff and other personnel to find solutions throughout the design process Interacts with contractors, clients, and facility operators Possesses effective oral and written communication skills Ownership / Growth / Direction Grows professionally to work independently with minimal supervision upon assignment of tasks (May require some technical and/or procedural help) Continual self-improvement in latest technology and equipment in the industry Continual self-improvement in interpersonal skills and effective oral and written communications Follows Company policies, procedures and work instructions as found on the Company network Qualifications Must be able to work with out current or future sponsorship. Zero to four years of CAD experience. Experience with a background in Consulting Engineering or Industrial/Utility facility design/operation preferred Degree or Certificate in Electrical or CAD/Drafting Technology or equivalent is preferred Efficient in the use of Autodesk's AutoCAD for preparation of electrical drawings (AutoCAD Electrical Package and Revit experience is a plus) Experience with national electrical codes and electrical industry standards is a plus Experience in process controls, and medium/low voltage electrical distribution is a plus Have general knowledge of other related disciplines (mechanical & structural) Ability to work efficiently and effectively when managing multiple tasks Effective oral and written communications and excellent interpersonal skills with the ability to work through the resolution of project related issues Must be self-motivated, results oriented, and be flexible to work well under tight schedules in a fast-paced team environment Efficient in the use of MS Office software suite: Outlook, Excel, Word, OneNote, Project and Access Must be a citizen or able to work in The United States without current or future sponsorship. What H2E Offers: Competitive Wages $25.00 - $35.00 (DOE) Health/Dental/Vision benefits/401k/Profit Sharing Flexible hours Holiday, Sick, and Vacation Time Opportunity for Advancement Amazing Team Environment

Service Technician _____________________________________________________________________________________________________ DEPARTMENT: Field Operations REPORTS TO: Area Service Manager FLSA: Non-exempt (Hourly) Why You Should Join Us! A comprehensive health plan that includes medical, dental, and vision coverage to ensure you and your family have access to the care you need A 401(k)-retirement plan with a generous company match to help you save for your future and achieve your financial goals Other fringe benefits including Birthday & Anniversary bonus, company-wide discounts, legal services, short & long-term disability, etc. Positive work environments that offer work/life balance and professional growth Mission-driven work making a global impact with local roots The opportunity to have hands on work experience with industry leading, innovative technology Position Summary The Service Technician is responsible for installing, servicing, and troubleshooting alcohol monitoring devices while maintaining a safe, organized work environment and delivering excellent customer service. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Installation, servicing, troubleshooting, and removal of all alcohol monitoring devices Fulfill daily operational duties of assigned facility which include: Operate a clean, organized and hazard free work environment Conducts training sessions covering use of products to customers Maintain a positive and caring atmosphere for customers and employees Consistently perform monthly inventory audits Assist other shops in surrounding area when applicable Management of daily hours, ensuring 40 hours or less weekly Correspondence with management and/or lead technicians when challenges are presented Maintain the integrity, confidentiality, and security of client information Adherence to all state and federal rule, regulation and statute Any other duty, as assigned Qualifications High School Diploma or equivalent 1 years' experience with 12V 1 years' experience in a customer service role Basic computer skills Strong written and verbal communication skills Detail orientation PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to sit, kneel, and stand regularly while installing alcohol monitoring devices into tight spaces. The employee frequently is required to walk, reach or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Overtime is limited but required occasionally, and continuous interruptions require flexibility and a willingness to modify plans and behavior when necessary. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills aptitudes and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills or abilities. The base pay range for this position is $17.00-18.00 hourly. Actual compensation will be based on factors such as experience, skills, and location.

Job DescriptionSalary: We are on the lookout for individuals who thrive in the collaborative spirit of engineering, where their efforts are appreciated, and excellence is recognized. Join our dynamic team where you can play a crucial role in creating a meaningful and long-lasting influence on the communities we serve. Apply now for our Transportation/Civil Project Engineer (EI) opportunity based in our Clarkston or Coeur d'Alene, Idaho office. This opportunity is also available for those who live close to any of our office locations. Job Summary: The Transportation/Civil Project Engineer will work closely with other engineers, technical specialists, and clients to successfully deliver innovative solutions for our client's challenges. They work as a key team member of highway/roadway/bridge and other infrastructure projects across all of Kellers offices. This individual will focus on multi-discipline projects performing independent engineering and design calculations to develop solutions to some of the toughest transportation challenges across the region. Responsibilities include: Participate in all phases of a project including planning, design, and constructionfor a variety of federal, state, and local clients Using local or AASHTO standards, develop horizontal and vertical alignment, roadway sections, intersection layout and sight distance determination, interchange layout, utility plans, traffic control plans, signing and striping, roadway drainage including hydraulic reports, and right-of-way plans Analyze engineering and survey data and interpret design standards and guidelines to make sound decisions and solve design challenges Work with multidisciplinary technical teams on a variety of project sizes Provide exceptional client service Develop plans, specifications, and estimates using Civil 3D or OpenRoads, MS Office programs, Bluebeam, and other design software Develop intimate familiarity with design standards, processes, and procedures Assist with technical memoranda, engineering reports, and planning studies Assist with construction administration services Perform other duties as assigned Required Skills/Abilities: Proficient with MS Office (Excel, Word, PowerPoint) MicroStation/OpenRoads Designer and/or AutoCAD/Civil3D experience is preferred not required Design experience is desired with a strong interest in civil engineering and transportation design Excellent written and verbal communication skills Excellent organization skills Self-motivated with the ability to work independently with multiple priorities Attention to detail, quality work products, and client service Education and Experience: Bachelors degree in Civil Engineering or related field Passed the Fundamentals of Engineering (FE) exam 0-4 years of relevant professional experience Benefits: Employee medical, dental, and vision insurance for employees and dependents Short-term and long-term disability insurance Company paid life insurance with option to buy up Salary Advantage Program Employee assistance program (EAP) Flexible spending account (FSA) Health savings account (HSA) 401k match program & access to asset management services Year-end bonus Costco membership Paid time off (PTO) and PTO sell back program Paid Holidays Parental Leave Tuition Reimbursement Paid day of community service We are a mid-sized consulting firm providing water, wastewater, civil, transportation, and structural engineering services throughout the West including Oregon, Washington, Idaho, Nevada, and Utah. We provide client-focused solutions in surface water, water and wastewater engineering, as well as transportation planning, roadway, bridges and vertical structures, site civil design, construction management, electrical, controls, and surveying. Our clients include federal, state, and local agencies as well as small and medium sized cities. Our work is never boring and always influences the communities we serve. We take joy in everything we do from work to play our staff finds ways to be more human and balanced. Please review the Voluntary Self-Identification of Disability form foundhere to answer the questions provided at the bottom of the application process. Keller Associates, Inc. is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.