Electrical engineer jobs in Egg Harbor, NJ

Type of Requisition: Regular Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: None Public Trust/Other Required: None Job Family: IT Infrastructure and Operations Job Qualifications: Skills: Research Development, Scientific Technical Writing, Spectral Analysis, Spectrum Analyzers Certifications: None Experience: 10 + years of related experience US Citizenship Required: No : RF Systems Engineer Sr. Principal Job Description General Dynamics Information Technology (GDIT) has an exciting opportunity for an Systems Engineer Sr. Principal to support the Federal Aviation Administration (FAA) in the research of Counter Unmanned Aviation Systems (CUAS). This research includes both detection systems (Passive, Radar, EO/IR cameras, and other technologies) along with mitigation systems (Actives transmitters, “net captures” and associated technologies). The candidate applying for this position shall have a thorough and in-depth understanding of spectrum analyzers and emitter systems and will document and present spectrum analysis on the systems under test for the preparation and guidance to FAA for use on airports. Key Area of Responsibilities: Strong knowledge of radar systems- Perform radar systems testing, and validation across multiple frequency bands (e.g. L, S, C, X, Ku, Ka) and various waveforms (FMCW, pulse-Doppler, phased array, etc.) Conduct RF measurements: power, gain, EIRP, spectrum occupancy, and EM/EMC compliance against manufacturers claims to validate and ensure it meets FAA Spectrum requirements to operate safely in an airport environment. Experience with antenna range measurements, near field and far field. The candidate will support GDIT program with UAS detection and mitigation technology/system research, testing, and evaluation (RDT&E) efforts. The Employee will support development of ‘performance specifications' framework for UAS detection and mitigation technology with the objective of creating Advisory Circulars or other FAA guidance and policy documents. HOW A RF/SPECRUM ENGINEER MAKEs AN IMPACT Performs systems modeling, simulation, and analysis. Prepare and execute test plans and test cards. Support planning and coordination efforts in preparation for the deployment, testing, and evaluation of UAS detection and mitigation technologies/systems Perform and document a hazard analysis and other safety related analyses prior to conducting UAS detection and mitigation testing/evaluations. Perform and document spectrum interference testing at each airport, prior to the commencement of UAS detection and mitigation testing/evaluations. Develop a methodology and ranking criteria for selecting UAS platforms for testing/evaluating against UAS detection and mitigation technologies/systems. Assist with each UAS detection and mitigation technology/system vendor with deploying, operating, maintaining, monitoring, troubleshooting, collecting data, and removing technologies/systems. Review, analyze, and report on the data collected during the test and evaluation period. Develop pass/fail criteria and metrics for testing/evaluating each of the UAS detection and technologies tested. Support fully documenting all UAS detection and mitigation technology/system RDT&E performed. Continually review and analyze the data being collected and help prepare draft Engineering Brief/Advisory Circular language, or other guidance document that describes the performance specifications, selection, procurement, deployment, and management of UAS detection and mitigation technologies/systems in the airport environment. Through longitudinal operations of multiple technologies/systems at multiple airports, prepare guidance for best practices to manage the effective use of UAS detection and mitigation technologies/systems to secure the airport and ensure fundamental principles of safety risk management are followed. WHAT YOU”LL NEED TO SUCCEED: Education: Bachelor's degree in operations research, computer science, engineering, mathematics, information systems, management science, aviation, aeronautical, or air traffic management/science. Master's Degree, MBA, or PhD in related field may be substituted for bachelor's degree and 3 years of experience. Required Experience: Minimum 15-plus years of demonstrated relevant experience Must possess, or have the ability to obtain, a valid US Passport. REQUIRED SKILLS Required Technical Skills: Research techniques, creating plans, cost estimation, risk management, data collection and analysis. Demonstrated experience using spectrum analyzers to characterize and illustrate spectrum environments, and to determine if a system is compliant with FCC and/or NTIA regulations. Experience collecting open air RF/Spectrum data Security Clearance Level: FAA Suitability Required Skills and Abilities: Basic understanding of evaluating functional capabilities of a system or technology. Able complete assigned tasks with little or no supervision. Excellent technical writing skills. Able to present technical information to technical and non-technical audiences. Self-Starter. Highly collaborative. Capable of planning and fully executing research and development projects. On-Time completion of deliverables that meet customer quality requirements Familiarity with MS Word, MS Excel, MS PowerPoint. Preferred Skills: Creating and executing test plans and procedures, data analysis, data visualization. Proficiency using MS Excel formulas or tools like JMP to statistically analyze data and develop visualizations of the research data. Work on site at the Customer site (William J Hughes Technical Center, near Atlantic City NJ) Will be required to lift objects weighting 25 lbs. or less. Possible travel: 10% to 25% The likely salary range for this position is $133,875 - $181,125. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: Less than 10% Telecommuting Options: Onsite Work Location: USA NJ Atlantic City Additional Work Locations: Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc. Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

The Electrical Engineer, as part of the Equipment & Reliability Engineering Department at a major integrated petrochemical manufacturing facility, is responsible for specification, design, and maintenance of electrical equipment for all plant operations, including field installations. This individual will be responsible for developing maintenance and reliability strategies related to electrical equipment and for providing guidance to internal customers to maintain the reliability of the equipment. Duties will also include electrical plant modifications (Switchgear and Relay upgrades, MCC installations as well as UPS and substation battery systems. PRINCIPLE RESPONSIBILITIES * Provides technical support for the maintenance, operation, and troubleshooting of the refinery's electrical systems and equipment (including low, medium, and high voltage electrical equipment) * Investigates electrical equipment failures and recommends actions to enhance the system and equipment reliability * Develops electrical equipment specifications and associated reliability improvements/upgrade plans for that equipment * Provides technical support for front-end development, cost estimation, design, construction, and startup for projects and change packages * Assists in the development of maintenance and operating procedures for electrical equipment * Works to understand and promote Delaware Valley Refining Complex electrical practices * Maintains a basic understanding of industry standards (API, NFPA, NEC, IEEE, ASME, ANSI, ASCE) * Maintains knowledge of electrical area classifications and is familiar with acceptable methods of satisfying the requirements of equipment installations in hazardous areas * Understands the requirements of process changes (e.g., Management of Change) JOB QUALIFICATIONS * Ability to work with a wide variety of personnel at different levels of engineering, design, maintenance, and management and with internal customers as well as suppliers * Good interpersonal skills * Ability to communicate effectively and clearly in both written and verbal form for the purpose of instructing others in technical matters and obtaining cooperation from various personnel * Basic understanding of industrial electrical equipment, motors, motor starters, breakers, relay protection devices, transformers, and switchgear * Working experience in petrochemical production units and awareness of surroundings from a safety and environmental point of view * Demonstrates basic PC knowledge and skills. Has ability to use basic software such as Microsoft Word, Excel, Project, etc. Updates Project Management Program and has ability to use basic project scheduling program. Willing to learn and use AutoCAD, and SKM load-flow & short-circuit programs as well as SEL Quickset * Prefer professional experience within an oil refinery or petrochemical complex * Prefer 3 years of Electrical Power experience and a B.S. or higher Degree in Electrical Engineering --with experienced focus in industrial Electrical Power Systems Additional Job Description We thank all respondents for their interest in PBF Holding Company LLC ("PBF Energy"), however, only those selected for an interview will be contacted. Please no phone calls or emails to any employee of PBF Energy about this requisition. Placement agencies or recruiters need not respond. All resumes submitted by search firms to any employee of PBF Energy via email, the Internet or in any method without a valid written search agreement will be deemed the sole property of PBF Energy. No fee will be paid in the event the candidate is hired by PBF Energy as a result of the referral or through other means. PBF Energy is an equal opportunity employer. We are committed to creating a diverse, inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religious creed, sex, gender, gender identity or expression, sexual orientation, reproductive health decision making, national origin, ancestry, genetic information, physical or mental disability, medical condition, marital status, age, veteran and military status, or any other status protected by applicable law. We are committed to providing reasonable accommodations as required by law. The salary range for this position is $97,000- $147,000. The compensation range listed in this posting is in compliance with applicable state law. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills and internal peer equity will be considered in determining the selected candidate's compensation. Salaries at the time of hire are typically in the lower to middle portion of the above range in order to provide the opportunity to reflect future performance-based increases. In addition to salary, PBF offers a comprehensive and generous benefits package. #LI-AT1

Job DescriptionDescription: Development of new products and sustaining engineering programs covering frequency ranges from 100KHz to 60 MHz and power levels to 30,000 Watts. Research and conduct investigations and experiments in new technologies to design new or improve existing products. Develop, document, and implement design and action plans. Responsibility for development and sustaining engineering for RF components such as power amplifiers, combiners, couplers. Model, simulate, assemble and test of prototypes performing data analysis (S-parameter, power handling, etc.) to ensure compliance with product specifications. Create and direct documentation of engineering drawings, Bill of Materials, and accompanying drawing packages for new / existing product, procedures, or tooling / fixtures. Assist Sales, Manufacturing Engineering, Production, and Quality departments in resolving product issues, complaints, waiver requests, and in answering customer inquiries. Performs other design, process, or production related task as required by supervisor. Performs training and back up as requested by Supervisor. All other duties as assigned. Requirements: Qualifications: Ability to work with detail and accuracy; analyze problems quickly; sound employee relation skills; attention to detail and ability to keep focused on a number of concurrent projects; capability to work in teams. Skilled working with semi-automated machinery and computers. Bachelor of Science degree in Electrical Engineering or a related discipline with 1 to 3 years of related industry experience or equivalent combination of education and experience. Experienced in use of computer-aided design software such as ADS or Spice equivalent. Experienced in electrical testing, test equipment, and S-Parameter characterization. Use of RF test equipment (oscilloscope, spectrum analyzer, VNA, etc.). Familiar with analog, RF & mixed signal PCB schematic design and layout. Understanding of analog circuits, noise analysis, stability analysis. Focus on common RF building blocks. Demonstrated experience in debugging complex RF and analog circuit behavior, especially high frequency circuits. Proficiency in office software such as Word, Excel, and PowerPoint as required; ability to perform math calculations, measurements, analysis or reporting as directed. Familiarity with Lean manufacturing process, DFM, DFMEA, PFMEA Ability to read and comprehend work instructions written in English. Will be required to stand, walk, lift, pull, reach overhead, bend to the floor & twisting Key Attributes: Self-starter with a proven ability to work in a fast-paced, small-company, team environment. Action oriented, methodical and well organized. Strong communication skills both verbal and in writing Strong adherence to attendance policies Benefits Include: Medical, Vision, Dental & Life Insurance 401(k) with company match Paid Time Off Monday - Friday schedule Hours: 7am - 3:30pm or 8am - 4:30pm Professional Development Assistance

FES- Further Enterprise Solutions a leading provider of engineering services, turnkey solutions, and software solutions, Founded in 2002 by wireless industry veterans, FES has rapidly grown to become a leading provider of innovative solutions to leading telecommunications providers and equipment manufacturers. FES is headquartered in Philadelphia, PA with branch offices through the U.S. and Canada to ensure a rapid response and face to face contact with our clients and staff. Job Description FES- Further Enterprise Solutions, a leading provider of engineering solutions, turnkey projects, and software to wireless operators and equipment vendors, is seeking experienced DAS RF engineers for long term consulting projects across the U.S. Extensive experience (5+ years) designing and optimizing in-building and/ or outdoor DAS systems is required. Qualifications Experience (5+ years) designing and optimizing in-building and/ or outdoor DAS systems is required. Experience at companies that build and lease or sell DAS systems, or intensive experience on DAS systems with a wireless service provider, is preferred. Candidates must have experience in all aspects of DAS design and optimization, including performing site visits and surveys for DAS host and node locations, performing CW tests, creating DAS specific link budgets, using spectrum analyzers, adjusting attenuator settings in system for proper link balance, and monitoring network performance KPIs and adjusting powers and parameter settings for optimal performance. LTE, UMTS, and iBwave tool experience is a plus. Additionally - we are looking for Engineers and Technicians with ATT 5 Step Commissioning Certification!! Additional Information All your information will be kept confidential according to EEO guidelines.

FES- Further Enterprise Solutions a leading provider of engineering services, turnkey solutions, and software solutions, Founded in 2002 by wireless industry veterans, FES has rapidly grown to become a leading provider of innovative solutions to leading telecommunications providers and equipment manufacturers. FES is headquartered in Philadelphia, PA with branch offices through the U.S. and Canada to ensure a rapid response and face to face contact with our clients and staff. Job Description FES- Further Enterprise Solutions, a leading provider of engineering solutions, turnkey projects, and software to wireless operators and equipment vendors, is seeking experienced DAS RF engineers for long term consulting projects across the U.S. Extensive experience (5+ years) designing and optimizing in-building and/ or outdoor DAS systems is required. Qualifications Experience (5+ years) designing and optimizing in-building and/ or outdoor DAS systems is required. Experience at companies that build and lease or sell DAS systems, or intensive experience on DAS systems with a wireless service provider, is preferred. Candidates must have experience in all aspects of DAS design and optimization, including performing site visits and surveys for DAS host and node locations, performing CW tests, creating DAS specific link budgets, using spectrum analyzers, adjusting attenuator settings in system for proper link balance, and monitoring network performance KPIs and adjusting powers and parameter settings for optimal performance. LTE, UMTS, and iBwave tool experience is a plus. Additionally - we are looking for Engineers and Technicians with ATT 5 Step Commissioning Certification!! Additional InformationAll your information will be kept confidential according to EEO guidelines.

Role description: The Plant Electrical Engineer provides technical expertise within the Bridgeton plant. The area of discipline includes but is not limited to heavy industrial equipment, conveyors, batch systems, and other areas associated with glass container manufacturing. Responsibilities: Develop solutions for the Bridgeton plant to satisfy the capacity customer and quality constraints and ensure they fall within the Ardagh Group Capital Plan Supervise all electrical work and personal Interface with contractors and other Ardagh Group engineers during field installations Evaluate new processes and plant equipment to determine the benefits to Ardagh Glass Packaging Investigate circumstances surrounding plant electrical equipment and prepare a plan to maximize usage and production Participate and/or lead root cause analysis on equipment failures Document maintenance task steps to properly maintain manufacturing equipment Provide operational support and troubleshooting for ongoing issues Collaborate and support plant maintenance teams with respect to preventive and predictive maintenance of the electrical systems Aid in the facilitation of corporate capital projects, working alongside the corporate engineering team to implement the best solutions for the Bridgeton plant Train plant operations and maintenance teams on operation/troubleshooting of the electrical systems in glass bottle manufacturing Minimum skills / qualifications: Bachelor's degree in electrical engineering or equivalent experience Three (3) years in a manufacturing environment Experience with Programmable Logic Controllers (PLC) programming Effective written and verbal communication skills Detail-oriented and can identify problems and make recommendations Proficient in Microsoft Office Suite Preferred skills / qualifications: Ability to design and render working drawings for a variety of manufacturing processes Experience with Allen Bradley and/or Siemen's PLC's Prior experience in glass container process equipment and production Prior experience with preventive and/or predictive maintenance programs and CMMS Knowledge of AutoCAD Compensation: The anticipated base annual salary range for this role is between $93,900 and 140,900 per year. Please note that the salary range provided is a good faith estimate. The final salary will be determined after considering relevant factors, including a candidate's qualifications and experience, where appropriate. This role is eligible to participate in the annual Ardagh Incentive Bonus (AIB) plan. The bonus incentive program is based on total company performance. Benefits Offered: Medical, prescription, dental and vision plans Flexible Spending Accounts (FSA) Life insurance 401(k) retirement plan with company match Paid holidays and vacation Short- and Long-Term Disability (STD/LTD) Employee Assistance Program (EAP) Apprenticeship programs Professional and personal development opportunities through Employee Resource Groups Please note the compensation and benefits information above is accurate as of the date of this posting. Ardagh reserves the right to modify this information at any time in accordance with applicable law. About Ardagh Group Ardagh Glass Packaging is a global leader in glass packaging solutions, producing packaging for the world's leading brands. We trace our roots all the way back to the Irish Glass Bottle Company, founded in 1932. Since then, we have grown rapidly to a team of more than 20,000 people with revenues of over $9 billion. Today, we have a presence across Europe, Africa, and North America. Did you know that Ardagh produces many of the cans and bottles you drink your favorite beverages from? Did you know we produce metal and glass packaging which are permanent materials, meaning they can be infinitely recycled without any loss of quality? Did you know we produce more than 160 million containers per day? Ardagh is passionate about sustainability and has a reputation for innovation. We push the boundaries of what's possible, pioneering new production methods, new design techniques and new ways to recycle and save energy. Our aim is to reduce any negative environmental impact while remaining economically sustainable and socially responsible. We believe that the success of our business depends on the success of our people. We strive to create working environments where our employees feel valued, can work to their full potential, and where their achievements are celebrated. Here at Ardagh, we offer exciting and rewarding opportunities for talented and creative people. If you have ambition and want to make an impact with your career, come and join our team, you'll enjoy the journey! Ardagh Group is an Equal Employment Opportunity (EEO) Employer and does not discriminate on the basis of age, race, color, religion, gender, sexual orientation, gender identity, gender expression, national origin, protected veteran status, disability or any other basis prohibited by federal, state, and local law.

**Are you looking to power the next leap in the exciting world of advanced electronics?** Do you want to help solve problems that drive success in the rapidly evolving technology and connectivity landscape? Then bring your problem-solving, passion, and creativity to help us power the next leap in electronics. At Qnity, we're more than a global leader in materials and solutions for advanced electronics and high-tech industries - we're a tight-knit team that is motivated by new possibilities, and always up for a challenge. All our dedicated teams contribute to making cutting-edge technology possible. We value forward-thinking challengers, boundary-pushers, and diverse perspectives across all our departments, because we know we play a critical role in the world enabling faster progress for all. Learn how you can start or jumpstart your career with us. The **DuPont Electronics Business** is seeking early career rotational programs vision is to empower the next generation of curious, agile and collaborative professionals who embrace and drive Qnity's business strategies. Through a diverse offering of experiential learning assignments, our early career talent will have the ability to learn and demonstrate the necessary capabilities to propel to higher levels of industry leading performance. Through our rotational program you will experience hands-on assignments, peer and mentor connections, and technical and leadership training. In this program, you will be responsible for implementing engineering best practices, analyzing and improving processes, and contributing to projects aimed at enhancing safety, product quality, and equipment or infrastructure. You will have the opportunity to take on varied roles such as Production / Process Engineering, Manufacturing Technology, Equipment Reliability & Maintenance, Continuous Improvement, Product Quality, Technical Service, and Operations Management. **Requirements:** + Pursuing or hold a Bachelor's or Master's degree in Chemical, Mechanical, Electrical Engineering, or other related engineering majors from an ABET accredited institution. + GPA of 3.0 or higher on a 4.0 scale. + Minimum of 6 months of paid co-op or internship equivalent experience in your engineering discipline/major. + Legal right to work in the United States without any employment restrictions. **Expectations:** + 100% geographic flexibility to allow for best career development fit. + Willingness to relocate to new locations as needed. + Willingness to be on-call for plant area support when required. + Multi-year commitment to complete a minimum of two assignments (usually 12-24 months per assignment). **Preferred Skills:** + Demonstrated leadership capabilities (taking initiative, agility, adaptability, influence management). + Six Sigma green belt certification (or willingness to become certified in the first 24 months). + Training and experience with root cause failure analysis, process hazards analysis, and high hazard process safety. Join our team and become a part of our legacy of successful alumni who have advanced through the ranks to become senior leaders and executives. We seek curious and creative individuals who are ready to challenge the status quo and drive meaningful change. Join our Talent Community (*************************************************************** to stay connected with us! Qnity is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information (**************************************************** . Qnity offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page (*************************************************************************** . The Pay range for this role is $64,680.00 - $101,640.00 Annual **How Base Pay is Determined:** Qnity has job leveling frameworks that help organize roles based on progressive levels of responsibility, proficiency and qualifications. Each role has an associated pay range (or an established pay rate for some roles) based on the competitive market in each country where we operate. Each individual's pay is based on a variety of factors, including their role and the associated pay range for that role, their geographic location (i.e., country, state, metropolitan area), as well as their skills, experience, education and certifications, and performance.

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Green Card or US Citizenship required. T5 Program Summary: The Federal Aviation Administration (FAA) awarded the Technical Support Services Contract 5 (T5) to Parsons in April 2023. Parsons is the prime contractor. This $1.8+ billion contract has a 4-year base period with two 3-year options. The statement of work includes a variety of activities that support the FAA's Capital Investment Plan (CIP) and certain reimbursable programs, the FAA NextGen Program, national security programs and aviation safety. Specifically, work includes site selection and engineering, construction, environmental and fire/life safety, equipment installation and testing, drafting, contract surveillance, and other technical services as required. Work is performed across the nation in each of the FAA's nine regions as well as the Aeronautical Center in Oklahoma City, Oklahoma, and the Technical Center in Atlantic City, New Jersey and in several U.S. territories. An average staff of 500 with a peak staff over 650 supports this contract, in addition to those subcontractors who perform construction work. We need our Electrical Designers at this level to apply standard design principles and theories to complete assignments. In this role you will develop difficult and complex working drawings from equipment specifications, engineering notes, sketches, and/or detailed drawings, ensuring that they meet company and industry standards and codes. Our Electrical designers understand the materials and methods normally used within the assigned discipline. Responsibilities: * Utilizes a CAD workstation to prepare engineering drawings consisting of standard arrangements, layouts, flow sheets, assemblies, isometrics, etc., from rough sketches and/or from general engineering and design information according to established standards and procedures. * Works closely with other Designer and Engineers to ensure a coordinated design. * Applies standard design principles and theories to complete assignments. * Utilizes technical manuals to ensure compliance with company policies and applicable standards and codes such as ANSI, PFI, and ASME. * Ensures compliance with required design safety factors, tolerances, and specifications. * Compiles data and performs dimensional and routine calculations required for the preparation of drawings. * Makes required changes, additions, and/or revisions, as directed by immediate supervisor. * May assist in training lower-level Designer/Drafters in various procedures. * Checks drawings prepared by lower-level Designer/Drafters for accuracy and adequacy. * Performs other responsibilities associated with this position as may be appropriate. * Must be able to meet customer security requirements. A background check by Federal Authorities will be performed. Required Skills: * Associate's or equivalent technical degree or certificate of completion from an accredited designer/drafter course (or equivalent) is preferred * 10+ years of relevant experience * Requirements include PC literacy, proficiency in utilizing CAD and other computer software used to complete design assignments. * AutoCAD 2019 experience required. * Strong understanding of orthographic (2D) and/or isometric (3D) designs and supplier/manufacturer drawings. * Knowledge of codes such as ANSI, PFI, and ASME. Security Clearance Requirement: None This position is part of our Federal Solutions team. The Federal Solutions segment delivers resources to our US government customers that ensure the success of missions around the globe. Our intelligent employees drive the state of the art as they provide services and solutions in the areas of defense, security, intelligence, infrastructure, and environmental. We promote a culture of excellence and close-knit teams that take pride in delivering, protecting, and sustaining our nation's most critical assets, from Earth to cyberspace. Throughout the company, our people are anticipating what's next to deliver the solutions our customers need now. Salary Range: $29.95 - $52.40 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to ************************************************

NDI Engineering Company is looking for an entry level electrical engineer to assist in the design, implementation, maintenance, troubleshooting, and improvement of electrical engineering functions to the Electromagnetic Aircraft Launch System (EMALS) and/or Advanced Arresting Gear (AAG). EMALS is the aircraft launch system on Ford Class Carriers. This role requires a highly adaptable and resilient individual who is willing and able to travel to challenging environments and perform duties in physically demanding and uncomfortable conditions aboard naval vessels (surface), military installations, or remote field sites. The Electrical Engineer will work closely with senior engineers to ensure the reliability, availability, and performance of the AAG and/or EMALS. Role and Responsibilities · Work with development, system engineering, and production teams to accurately identify, characterize, resolve, document, address, and track electrical deficiencies. This may include: power factor analysis and correction, harmonic modeling and analysis, grounding analysis, short-circuit investigations, and arc-flash studies. · Contributes to technical presentations, electrical work products, electrical requirements/designs/concepts and written communications to explain issues to management. · Create, review, and execute hardware design documentation such as interface control drawings, assembly drawings, test procedures, and other technical documents. · Create, develop, review, and interpret engineering drawings of complex parts and systems. · Research and develop product specifications and interface requirements. · Resolve complex electrical compatibility and interface design issues assessing performance attributes and key performance parameters. · Evaluate components to determine electrical performance impacts to existing designs in relation to cost, schedule, and performance. · Skilled in communicating issues, impacts and corrective actions · Interact with customers to gather critical information and review engineering plans. Qualifications and Requirements · Bachelors or Master's Degree in Electrical Engineering, from an ABET-accredited institution. · 0-6 years of relevant experience, including internships, co-op programs, or academic projects with a strong emphasis on hands-on electrical equipment. For college grads, including basic coursework (i.e. circuit analysis, etc) and relevant coursework as well as any leadership positions in IEEE or other engineering organizations identified on the resume is very helpful. · Knowledge or experience Controls, Power and Power Conversions, transformers and rectifiers is desired. · Knowledge or experience in Electromagnetic Interference (EMI) is a plus. · This is NOT a remote position - work will be out of Lakehurst, NJ · Readiness for travel, up to 5-20% or more, both domestically and internationally. This includes the ability to deploy aboard naval vessels (surface) or to remote forward operating bases in different environments. · Candidates must be comfortable and capable of working in challenging and often uncomfortable conditions, such as noisy machinery, confined spaces, elevated heights, extreme temperatures (hot/cold), wet or humid environments, and areas with fumes, dust, or vibrations. · Physical readiness is a prerequisite, necessitating the ability to lift, carry, push, and pull objects up to 50lbs, and to stand, walk, climb ladders/stairs, stoop, kneel, crouch, and crawl for extended periods. · Manual dexterity and fine motor skills are required for operating tools and equipment. · The ability to wear all required Personal Protective Equipment (PPE), including hard hats, safety glasses, hearing protection, respirators, and steel-toed boots, is mandatory. · Must be a U.S. Citizen and be able to obtain and maintain a SECRET U.S. Government security clearance · Possession of a valid U.S. Driver's License is required.

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at ******************* Job Function: Supply Chain Engineering Job Sub Function: Manufacturing Engineering Job Category: Scientific/Technology All Job Posting Locations: Danvers, Massachusetts, United States of America Job Description: About Cardiovascular Fueled by innovation at the intersection of biology and technology, we're developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of Cardiovascular? Ready to join a team that's reimagining how we heal? Our Cardiovascular team develops leading solutions for heart recovery, electrophysiology, and stroke. You will join a proud heritage of continually elevating standards of care for stroke, heart failure and atrial fibrillation (AFib) patients. Your unique talents will help patients on their journey to wellness. Learn more at *******************/medtech We are searching for the best talent for Sr. Electronics Production Engineer Purpose: This role will drive the scale-up and production of a complex electro-mechanical medical device used in life-saving cardiac support therapies. This role will own scale-up activities, validations, root-cause investigations, safety and regulatory compliance, and continuous process improvement with a focus on cost savings and robust, repeatable manufacturing processes. You will be responsible for: Scale-Up & Design Transfer Lead scale-up from pilot to full-scale production, including process development, equipment qualification, line layout, and work instructions. Collaborate with R&D and Quality to ensure smooth design transfers and robust manufacturing readiness. Validation & Verification Plan and execute IQ/OQ/PQ activities for equipment, processes, and software where applicable. Develop and approve validation protocols and reports; ensure traceability to user needs and regulatory requirements. Root Cause Investigation & CAPA Lead root-cause analysis for yield loss, quality escapes, and process deviations using structured problem-solving methods. Implement corrective and preventive actions (CAPA), verify effectiveness, and close with data-driven evidence. Safety & Regulatory Compliance Ensure manufacturing activities comply with EHS standards and device safety requirements. Maintain alignment with regulatory expectations (e.g., FDA QSR/21 CFR Part 820, ISO 13485) and support regulatory submissions as needed. Process Improvement & Cost Savings Identify and execute Lean/Six Sigma projects to improve throughput, reduce cycle times, increase yield, and lower cost per unit. Apply statistical methods (DOE, SPC, MSA, Cp/Cpk analysis) to optimize processes and sustain gains. Quality Systems & Documentation Maintain and improve documentation: SOPs, work instructions, MBR/Device History Records, change controls, and validation artifacts. Develop and manage PFMEA, Control Plans, and ongoing quality checks to ensure product reliability. Production Support Provide hands-on troubleshooting on the manufacturing floor; drive standard work, line balancing, and equipment optimization. Monitor key production metrics and implement actions to meet targets for quality, cost, and schedule. Cross-Functional Collaboration Partner with Quality, Regulatory, Supply Chain, Manufacturing, and R&D to align on program milestones, risk, and resource needs. Mentor and coach junior engineers and technicians; contribute to a culture of continuous improvement. Qualifications / Requirements: Bachelor's degree in Engineering (Electrical, Mechanical, Biomedical, Industrial, or related). Master's degree strongly preferred. 6-10+ years of manufacturing engineering experience in electronics or medical devices (device hardware, electronics assembly, or related fields). Working knowledge of FDA QSR/21 CFR Part 820 and ISO 13485. Experience supporting or leading design transfers, validation activities, and quality systems in a regulated environment. Proficient in DOE/DOE-based experiments, statistical process control (SPC), capability analyses (Cp/Cpk), MSA, and root-cause analysis methodologies. Experience with process validation (IQ/OQ/PQ) and risk-based approaches to manufacturing. Familiarity with PCB/SMT assembly, soldering, testing, electronics packaging, and related manufacturing processes. Experience with change control, CAPA, PFMEA, control plans, and documentation management. Excellent problem-solving, communication, and project-management skills. Ability to work cross-functionally, influence without authority, and manage multiple priorities in a fast-paced environment. Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act. Johnson & Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request an accommodation, external applicants please contact us via *******************/contact-us/careers , internal employees contact AskGS to be directed to your accommodation resource. #LIOnsite Required Skills: Preferred Skills: Accelerating, Coaching, Critical Thinking, Facility Management, Good Manufacturing Practices (GMP), Lean Manufacturing Principles, Lean Supply Chain Management, Manufacturing Engineering, Performance Measurement, Product Design, Program Management, Project Engineering, Project Schedule, Risk Compliance, Robotic Automation, Safety-Oriented, Science, Technology, Engineering, and Math (STEM) Application, Technologically Savvy The anticipated base pay range for this position is : $94,000.00 - $151,800.00 Additional Description for Pay Transparency: $91,000 - $147,200 This position is eligible to participate in the Company's long-term incentive program. Subject to the terms of their respective policies and date of hire, employees are eligible for the following time off benefits: Vacation -120 hours per calendar year Sick time - 40 hours per calendar year; for employees who reside in the State of Colorado -48 hours per calendar year; for employees who reside in the State of Washington -56 hours per calendar year Holiday pay, including Floating Holidays -13 days per calendar year Work, Personal and Family Time - up to 40 hours per calendar year Parental Leave - 480 hours within one year of the birth/adoption/foster care of a child Bereavement Leave - 240 hours for an immediate family member: 40 hours for an extended family member per calendar year Caregiver Leave - 80 hours in a 52-week rolling period10 days Volunteer Leave - 32 hours per calendar year Military Spouse Time-Off - 80 hours per calendar year Please use the following language: For additional general information on Company benefits, please go to: - *********************************************

At DuPont, our purpose is to empower the world with essential innovations to thrive. We work on things that matter. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world. Discover the many reasons the world's most talented people are choosing to work at DuPont. Why Join Us | DuPont Careers (******************************************* At **DuPont** , our paid internship and co-op opportunities are designed to give students more than just a glimpse into the professional world-they're a launchpad for your future. You'll work on real, impactful projects alongside experienced DuPont professionals, applying what you've learned in the classroom to solve real-world challenges. Through this hands-on experience, you'll build essential skills, grow your network, and gain exposure to a collaborative, inclusive workplace that values innovation and leadership. You will have the opportunity to collaborate across teams and functions, gaining exposure to innovative technologies and diverse perspectives that drive real-world solutions. **As an Engineering intern or co-op, you'll:** + Embrace DuPont's core values in safety, sustainability, and innovation + Gain industrial experience and insight into our businesses, products, and customers + Work in team-based environments with mentorship and technical training + Participate in professional development opportunities tailored to your role Our student program offers both internships and co-op assignments tailored to fit your academic schedule and career goals. Assignment length and scope may vary by site and function, but every experience is designed to help you grow, contribute, and lead. Typical roles in manufacturing, operations, and business at DuPont span a wide range of exciting and impactful areas, including Manufacturing Technical and Process Engineering, Capital Projects, Automation and Process Control, Leveraged Engineering, Equipment Reliability and Maintenance, Continuous Improvement, Product Quality, and Technical Service. Summer interns and co-ops must be available from May - August. **Requirements** To be considered, the following requirements must be met: + Enrolled as a full-time student pursuing a Bachelor's or Master's degree in Chemical, Mechanical, Electrical or other engineering disciplines from an ABET accredited program + GPA of 3.0 or higher (out of 4.0 scale) + Legal right to work in the U.S. without restriction Join our Talent Community (**************************************************** to stay connected with us! DuPont is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information (****************************************************** . DuPont offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page (********************************************************** . The Pay range for this role is $16.10 - $25.30 Hourly **How Base Pay is Determined:** DuPont has job leveling frameworks that help organize roles based on progressive levels of responsibility, proficiency and qualifications. Each role has an associated pay range (or an established pay rate for some roles) based on the competitive market in each country where we operate. Each individual's pay is based on a variety of factors, including their role and the associated pay range for that role, their geographic location (i.e., country, state, metropolitan area), as well as their skills, experience, education and certifications, and performance.

Job Description T&M Associates is seeking an Electrical Engineer/Designer with 3-5 years of experience to join our MEP team in New Jersey. The ideal candidate will have experience contributing to the design of electrical systems for commercial, institutional, and residential facilities and is looking to continue developing technical skills and project responsibility within a collaborative team environment. Responsibilities: Support and contribute to the design of electrical systems for commercial, institutional, and residential projects Prepare drawings, calculations, and construction documents Participate in project meetings and coordinate with project teams Perform field surveys and assist with construction administration Apply applicable codes and standards to design work Qualifications: Bachelor's Degree in Electrical Engineering 3-5 years of building electrical systems design experience AutoCAD proficiency required; Revit experience preferred EIT preferred or on track to obtain Strong communication skills and ability to manage multiple tasks T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $79,000 - $103,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate's experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities - all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at *********************** #LI-HYBRID

Design, develop, test, and supervise the manufacturing of electrical equipment Work on projects from conception to completion, ensuring adherence to deadlines and budget constraints Conduct system assessments and implement improvements or upgrades as needed Collaborate with a multidisciplinary team to achieve project goals Stay current on industry trends and advancements to incorporate best practices into projects Requirements: Bachelor's degree in Electrical Engineering or related field Proven experience in electrical engineering or a similar role Strong knowledge of electrical systems, components, and materials Proficiency in CAD software and other relevant tools Excellent problem-solving and analytical skills Effective communication and teamwork abilities Benefits: Competitive salary Healthcare coverage 401(k) retirement savings plan Paid time off and holidays Professional development opportunities

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $63,795 to - $164,301 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0855 Electronics Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857056-0855-CYBER Control number 852987000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Use engineering manuals, standard publications, and technical material to obtain information and pertinent data for use by higher level engineers, contractors and/or customers. * Keep abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments. * Perform duties in support of the installation, operations, and maintenance of weapon systems, subsystems, facilities, machinery, and/or support equipment. * Perform developmental assignments in the application of established principles, techniques, methods, and procedures of professional electronics engineering in the area of installation, operations, and maintenance. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: At least one year of specialized experience equivalent to at least the GS-09 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Modeling and simulation professional theories, concepts, principles, techniques, and practices of computer engineering, electronics engineering and/or computer science. GS-12: At least one year of specialized experience equivalent to at least the GS-11 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Leading and/or performing engineering work involving electronic circuits, circuit elements and equipment systems; applying a number of diverse electronics engineering practices, techniques and processes to identify and resolve complex engineering issues; supporting the planning, testing and troubleshooting of electronics engineering systems or devices; and, developing computer aided engineering analysis and tools in support of planning and designing applications. GS-13: At least one year of specialized experience equivalent to at least the GS-12 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-14: At least one year of specialized experience equivalent to at least the GS-13 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-15: At least one year of specialized experience equivalent to at least the GS-14 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of electronics engineering concepts, principles, methods, techniques, and standard engineering practices to perform moderately difficult or relatively limited phases of a larger and more complex installation, operations, and maintenance engineering project. * Knowledge of computer aided design and drafting (CADD) programs to perform design and drafting assignments, as well as other computer applications used in support of plans, analysis, and project reports. * Skill in applying the principles, concepts, and practices of the occupation sufficient to perform limited assignments in the field of electronics engineering. * Ability to communicate factual and procedural information clearly, orally and in writing. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

Since 1946, The Jet Pulverizer Company, Inc. has been committed to providing state-of-the-art processing equipment and services. The continuous technological advancement of our line of Micron-Master Jet Pulverizers and ongoing modernization and expansion of our Custom Grinding Division provide our customers with unsurpassed value and quality in both jet pulverizing equipment and custom grinding services. Summary objective: Manages jet mill projects, requiring multiple engineering disciplines. Acts as project manager and communicates with the vendor, sales, and management teams to relay any issues and ensure all aspects of the project are on track. Requirements Job Duties & Responsibilities: Manage Projects based on the project objectives as set by the OEM Technical Director by reviewing project proposals and plans; conferring with management. Studying product design, customer requirements, and performance standards; completing technical studies. Maintains project schedule by monitoring project progress; calculating time requirements; sequencing project elements; coordinating activities; resolving problems. Communicate with vendors for quotes and deliver specifications. Write purchase orders, communicating expectations and timelines, track open purchase orders and communicate errors or quality concerns. Coordinate Licensing Identify and qualify new vendors Create blueprints and 3D models Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions. Confirms product performance by designing and conducting tests. Maintains KPI a set of short and long term KPI Maintains a safe and clean working environment by enforcing procedures, rules, and regulations. Maintains product and company reputation by complying with federal and state regulations. Contributes to team effort by accomplishing related results as needed. The qualified candidate has the following desired skills: Ability to manage multiple projects and initiatives with strong attention to detail Ability to evaluate problems and recommend solutions Possess excellent verbal and written communication skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedural manuals Ability to write routine reports and correspondence Interpersonal and communication skills Scheduling evaluation/adjustment Backorder evaluation/problem solving Report preparation Able to travel up to 25% Education & Experience: Bachelor's Degree in Engineering Minimum 3 years in Project Management role Proficient in Microsoft Excel and Word Experience with SolidWorks and familiar Microsoft Dynamics NAV Enterprise Bonus if knowledgeable in SolidWorks PDM and AutoCAD Knowledge of machining and metalworking Salary Description $80,000 - $100,000/year plus bonus

The Electrical Engineer, as part of the Equipment & Reliability Engineering Department at a major integrated petrochemical manufacturing facility, is responsible for specification, design, and maintenance of electrical equipment for all plant operations, including field installations. This individual will be responsible for developing maintenance and reliability strategies related to electrical equipment and for providing guidance to internal customers to maintain the reliability of the equipment. Duties will also include electrical plant modifications (Switchgear and Relay upgrades, MCC installations as well as UPS and substation battery systems. PRINCIPLE RESPONSIBILITIES Provides technical support for the maintenance, operation, and troubleshooting of the refinery's electrical systems and equipment (including low, medium, and high voltage electrical equipment) Investigates electrical equipment failures and recommends actions to enhance the system and equipment reliability Develops electrical equipment specifications and associated reliability improvements/upgrade plans for that equipment Provides technical support for front-end development, cost estimation, design, construction, and startup for projects and change packages Assists in the development of maintenance and operating procedures for electrical equipment Works to understand and promote Delaware Valley Refining Complex electrical practices Maintains a basic understanding of industry standards (API, NFPA, NEC, IEEE, ASME, ANSI, ASCE) Maintains knowledge of electrical area classifications and is familiar with acceptable methods of satisfying the requirements of equipment installations in hazardous areas Understands the requirements of process changes (e.g., Management of Change) JOB QUALIFICATIONS Ability to work with a wide variety of personnel at different levels of engineering, design, maintenance, and management and with internal customers as well as suppliers Good interpersonal skills Ability to communicate effectively and clearly in both written and verbal form for the purpose of instructing others in technical matters and obtaining cooperation from various personnel Basic understanding of industrial electrical equipment, motors, motor starters, breakers, relay protection devices, transformers, and switchgear Working experience in petrochemical production units and awareness of surroundings from a safety and environmental point of view Demonstrates basic PC knowledge and skills. Has ability to use basic software such as Microsoft Word, Excel, Project, etc. Updates Project Management Program and has ability to use basic project scheduling program. Willing to learn and use AutoCAD, and SKM load-flow & short-circuit programs as well as SEL Quickset Prefer professional experience within an oil refinery or petrochemical complex Prefer 3 years of Electrical Power experience and a B.S. or higher Degree in Electrical Engineering --with experienced focus in industrial Electrical Power Systems Additional Job Description We thank all respondents for their interest in PBF Holding Company LLC (“PBF Energy”), however, only those selected for an interview will be contacted. Please no phone calls or emails to any employee of PBF Energy about this requisition. Placement agencies or recruiters need not respond. All resumes submitted by search firms to any employee of PBF Energy via email, the Internet or in any method without a valid written search agreement will be deemed the sole property of PBF Energy. No fee will be paid in the event the candidate is hired by PBF Energy as a result of the referral or through other means. PBF Energy is an equal opportunity employer. We are committed to creating a diverse, inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religious creed, sex, gender, gender identity or expression, sexual orientation, reproductive health decision making, national origin, ancestry, genetic information, physical or mental disability, medical condition, marital status, age, veteran and military status, or any other status protected by applicable law. We are committed to providing reasonable accommodations as required by law. The salary range for this position is $97,000- $147,000. The compensation range listed in this posting is in compliance with applicable state law. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills and internal peer equity will be considered in determining the selected candidate's compensation. Salaries at the time of hire are typically in the lower to middle portion of the above range in order to provide the opportunity to reflect future performance-based increases. In addition to salary, PBF offers a comprehensive and generous benefits package. #LI-AT1

FES- Further Enterprise Solutions a leading provider of engineering services, turnkey solutions, and software solutions, Founded in 2002 by wireless industry veterans, FES has rapidly grown to become a leading provider of innovative solutions to leading telecommunications providers and equipment manufacturers. FES is headquartered in Philadelphia, PA with branch offices through the U.S. and Canada to ensure a rapid response and face to face contact with our clients and staff. Job Description Job Requirements: Can be remote but must travel to market at times. 5+ years experience as CDMA/EVDO RF Optimization Market Lead or equivalent. Familiarity with RF Optimization procedures, tools and test equipment, familiarity with RF Optimization tunable parameters, knowledge of antenna configuration, Knowledge of ALU system architecture, Knowledge of UNIX shell scripts, Understanding of the Access Technologies (AMPS/TDMA/CDMA) air interface, ALU CDMA/EVDO Basic Call flow, mobile operations, Ability of using Network Performance tool Additional Information All your information will be kept confidential according to EEO guidelines.

**Are you looking to power the next leap in the exciting world of advanced electronics?** Do you want to help solve problems that drive success in the rapidly evolving technology and connectivity landscape? Then bring your problem-solving, passion, and creativity to help us power the next leap in electronics. At Qnity, we're more than a global leader in materials and solutions for advanced electronics and high-tech industries - we're a tight-knit team that is motivated by new possibilities, and always up for a challenge. All our dedicated teams contribute to making cutting-edge technology possible. We value forward-thinking challengers, boundary-pushers, and diverse perspectives across all our departments, because we know we play a critical role in the world enabling faster progress for all. Learn how you can start or jumpstart your career with us. The **DuPont** **Electro** **nics** **Business** partners with customers at the cutting edge of technology to enable breakthroughs across AI, advanced computing, and advanced connectivity between and within next-generation devices. From groundbreaking solutions for semiconductor chip manufacturing, to enabling high-speed transmission within complex electronic systems, our high-performance materials and integration expertise make tomorrow's technologies possible - powering the next leap forward! Join us and become a part of an industry leading world class company with deep materials science expertise, best-in-class manufacturing, and industry-leading innovations that make next-generation technology a reality for our customers. We believe in nurturing entry level engineering talent by providing a solid foundation for growth and development. We offer an environment that encourages creativity, innovation, and collaboration, providing our employees with opportunities to advance their careers. We are currently seeking individuals for critical roles at the following hiring locations: + Circleville, OH + Marlborough, MA + Bayport, TX + Towanda, PA + Newark, DE + Parlin, NJ + Cleveland, OH In these roles you will be responsible for implementing engineering best practices, analyzing and improving processes, and contributing to projects aimed at enhancing safety, product quality, and equipment or infrastructure. You will have the opportunity to work in various significant roles, such as Production / Process Engineering, Manufacturing Technology, Equipment Reliability & Maintenance, Continuous Improvement, Product Quality, Technical Service, and Operations Management. Please note that the talent identified through this job posting would be directly hired into one of the locations listed above. These roles are not part of the rotation program. **Requirements:** + Bachelor's or Master's degree in Chemical, Mechanical, Electrical Engineering or related engineering fields from an ABET accredited institution. + GPA of 3.0 or higher on a 4.0 scale. + Minimum of 6 months of paid co-op or internship equivalent experience in your engineering discipline/major. + Willingness to be on-call for plant area support when required. + Legal right to work in the United States without employment restrictions. **Preferred Skills:** + Demonstrated leadership capabilities (taking initiative, agility, adaptability, influence management). + Six sigma green belt certification (or willingness to become certified in the first 24 months). + Training and experience with root cause failure analysis, process hazards analysis, and high hazard process safety. Qnity is pursuing new technologies and performance materials that enable your designs to be smaller, more complex, more reliable, and more powerful than you could ever imagine. DuPont is a technology leader, serving the semiconductor, circuit board, industrial, display, digital and flexographic printing, aerospace, and transportation industries. Every day we are solving our customers' biggest challenges and are honored to be their partner of choice. Join our Talent Community (*************************************************************** to stay connected with us! Qnity is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information (**************************************************** . Qnity offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page (*************************************************************************** .

Job Description T&M Associates is seeking a multi-talented Staff Engineer to join our Water / Wastewater Department! This is an excellent opportunity for an engineer looking to advance their career to learn and grow within the framework of an engineering consulting firm. Responsibilities include the design projects in water and wastewater treatment facility, and linear infrastructure, as well as pumping stations and condition assessments, as well as field inspections, as required. Responsibilities Prepare plans, specifications, cost estimates, reports, and bid packages. Conduct construction observation for municipal infrastructure projects (e.g., sewer, storm drain, water). Ensure contractor compliance with design drawings and specifications. Perform quantity measurements, review shop drawings, and prepare daily field reports. Coordinate with municipal staff, residents, and other stakeholders. Participate in project discussions regarding technical approach, cost, and scheduling. Qualifications Bachelor's degree in either Civil or Environmental Engineering field is required. 2 - 4 years of related experience is preferred. Engineer in Training (EIT) certification is preferred with the goal to obtain a Professional Engineer's (P.E.) License. Proficient in AutoCAD and Civil 3D is required. Detail-oriented with a strong command of design principles and the ability to develop neat and accurate design calculations. Excellent analytical, interpersonal, writing, and verbal communication skills are required. Ability to work with peers and senior management and be a team player. Ability to organize and manage multiple priorities. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $79,000 - $103,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate's experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities - all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at *********************** #LI-HYBRID