Electrical engineer internship jobs in Dundalk, MD - 549 jobs

The Advanced Warfare Technology Division (AWT) of the Leidos Innovations Center (LInC) is looking for a Hardware Design Engineer to work with a multi-disciplined design team (electrical & mechanical engineers, systems engineers, software engineers, etc.) to design, develop, simulate, and integrate challenging circuit card designs for DSP and RF sensor systems based on given project requirements. Candidates will have a strong hardware background in high-speed digital circuit design, schematic entry, printed-circuit board fabrication, and conduction-cooled circuit card assembly design, in support of a fast-paced, multi-disciplinary design team. This role will also support integration, test, and verification in the final products. Primary Responsibilities Collaborate with a multi-disciplined engineering design team to design, test and integrate sophisticated digital designs hardware and firmware including RF sensor systems. Review and analyze high level system requirements, participate in defining, deriving and allocating these requirements into lower-level hardware requirements. Translate conceptual designs into design specifications and implement within detailed electrical designs involving electrical schematics, complete bills of materials (BOMs), Printed Circuit Board Design (PCB), layout techniques, documents and fabrication drawings. Analyze, design, develop and test embedded electronic circuit card assemblies (CCA's) containing Programmable Logic Devices (RFSoC, SoC, FPGA), data conversation, signal processing/filtering, high speed digital and analog, RF & amplification, power supply & power management circuitry. Analyze schematic diagrams for either custom or commercial-off-the shelf (COTS) electronic hardware involving high-speed digital and/or analog circuitry in associated FPGA-centric systems. Analyze, design, simulate, and implement designs which interface to common high-speed signaling standards such as SERDES, PLLs, and/or protocols such as PCIe Gen4, JESD204B/C, LVDS, etc. Evaluate, select, specify, design, modify, test, and/or integrate sensors, electronic modules (custom and COTS), cables, connectors, power subsystems. Apply basic knowledge of HDL design using VHDL/Verilog to write, simulate, synthesize and test designs used within various logic devices (SoC,FPGA/CPLD). Conduct experimental tests on equipment, evaluate results, followed by specification development for selecting components and equipment for deliverable systems. Generate and maintain requirements documents, functional specification documents, interface control documents and engineering drawings while applying configuration management policies. Develop project test plans and test procedures, provide test planning support, assist in the execution of both lab testing and field testing. Provide field support planning, mobilization/de-mobilization support, and other field support in general. Interact with outside customers, suppliers, and functional peer groups. Provide status reports to project managers and/or project lead as required. Some travel and work at remote sites for limited time periods will be required. Basic Qualifications BS in Electrical Engineering or Computer Engineering or related degree Minimum of 4 years of relevant experience Ability to be granted a security clearance Able to work and collaborate within a multidisciplinary engineering environment. Strong debug and problem-solving skills Familiarity or experience with one or more of the following: Schematic entry / PCB design tools (Altium, Cadence Allegro/OrCAD, KiCAD, or similar) Printed Circuit Board (PCB) Design involving parts selection, BOM creation, placement, high speed signal routing, fabrication drawings and documentation. HDL Design / Development (VHDL/Verilog) with System-On-Chip devices (SOC's), FPGA's, CPLD/s, and/or Microcontrollers. Vendor Design tools and Design Environments (IDE's) such as Xilinx Vivado, Vitis, Quartus, Questa Sim, Libero, Synplicity, etc. Lab test equipment - Oscilloscope, Voltmeter, Logic Analyzer, Spectrum Analyzer Revision control (git, SVN, ClearCase, etc.) Interfaces: DDRx, ADC/DACs, SerDes, PCIe, JTAG Hands on Lab testing and Integration Preferred Qualifications Master's Degree in Electrical or Computer Engineering Existing Secret (or above) Clearance Experience supporting or leading different phases of the product development lifecycle, including requirements analysis, system design, product development, integration, test, technical documentation and review of complex systems. Design, testing, integration and troubleshooting electronic circuits within embedded systems including digital, analog and radio frequency (RF) subsystems. Working Experience with the following: High speed PCB design techniques (> 1GHz) DSP fundamentals and FPGA implementation Schematic/PCB design tools such as Altium Designer, Cadence Allegro/OrCAD or KiCAD, or similar. Simulation / Validation and Designer-Level Testbench generation (VHDL/SystemVerilog) - using vendor tools or third party (Xilinx simulator, Siemens Modelsim/Questa, etc.) Script Generation (Perl, TCL, Python, etc) Microchip EDA tools and flows (Synopsys, Cadence, etc.) System Verilog / UVM High speed protocols like JESD204B, LVDS, PCIe, SERDES Performance characteristics of Analog Data Converters (ADCs/DACs) Digital Signal Processing (DSP) modeling using tools like MATLAB/Simulink C/C++ language software development for embedded, real-time systems All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #J-18808-Ljbffr

Lanham, Maryland Our client are an exciting Space company building a Space-based Cellular Broadband network Designed to provide connectivity at 4G/5G speeds everywhere on the planet. They are seeking a highly skilled and detail-oriented Electrical Harness Engineer to design, develop, and integrate electrical harnesses that form the backbone of their satellite's electrical system, ensuring reliable and efficient power and data transfer for successful missions. In addition to this there will also be the opportunity to engage in other Electrical Engineering Design aspects. Key Responsibilities: Design and develop electrical harnesses for satellite systems, considering mission requirements, space constraints, thermal considerations, and EMC requirements. Collaborate with system engineers, electrical designers, and mechanical engineers to define harness specifications and design constraints. Create and manage detailed harness drawings, including cable/wire routing, connector selection, splicing, and termination plans using CAD tools. Ensure compliance with industry standards (e.g., IPC-WHMA-A-620, ECSS-E-HB-10-10) and space agency requirements. Conduct analyses and simulations to verify mechanical integrity, electrical performance, and environmental resistance. Support fabrication, assembly, and testing of harnesses, providing guidance to ensure quality and adherence to specifications. Perform in-house testing and validation, including continuity checks, insulation resistance, and signal integrity testing. Collaborate with suppliers to source space-qualified components while maintaining cost-effectiveness and schedule adherence. Document all design and testing activities, including procedures, reports, and design changes. Participate in design reviews and cross-functional meetings, providing technical insights for optimization. Assist in troubleshooting harness-related issues during integration, testing, and in-orbit operations. Stay current with advancements in harness technologies and explore opportunities for innovation. Experience Needed: Ideally around 3-5 years of experience in Electrical Harness Design for Aerospace, Defense or Space applications. BS or higher in electrical engineering, Aerospace Engineering, or a related field. Previous experience in Project Management or Leading projects or track record in managing multiple projects and meet deadlines. Familiarity with harness design standards and schematic capture tools. Strong interpersonal skills and proven ability to collaborate effectively within cross-functional teams. Analytical mindset with strong problem-solving abilities. Desirable experience: Experienced with Electrical simulation tools: SPICE, MATLAB. Experience with high-reliability harness design for small satellites, CubeSats, or nano/microsatellites. Knowledge of space-rated materials and manufacturing processes. Familiarity with thermal analysis and thermal management techniques. Previous work with major space agencies or satellite manufacturers. If you are interested then please apply today.

At AV, we understand that a valuable internship should provide meaningful learning and real-world experience. Our Summer Internship Program offers students the opportunity to work alongside experienced engineers and scientists, gaining hands-on exposure to the technologies and challenges that drive our industry. Interns contribute directly to active projects, developing practical skills and building professional relationships in a collaborative environment as a valued member of the team. Our internship program is highly selective, ensuring that each intern receives personalized mentorship and opportunities to engage deeply with our engineering teams. We're seeking motivated students with an interest in electrical engineering and RF technologies to assist in developing and testing custom solutions for next-gen radar, phased array telemetry, radio, and perimeter intrusion detection systems. Responsibilities Work with a team of engineers, scientists, and project managers. Perform technology research, including field surveys, trade studies, and comparative analysis. Assist in design and testing of prototype and production systems using software and/or electrical engineering skills. Utilize and/or modify existing code bases and libraries; create and shape new functionality. Conduct field testing and evaluation of components, systems, and products. Develop firmware for embedded systems. Requirements Must be a high school graduate. Due to the nature of the role U.S. Citizenship is required. Currently enrolled or recently completed post-secondary program in Electrical Engineering, Computer Engineering, Systems Engineering, or a related field. Willing and able to work on-site at the Germantown, MD AV office for the duration of the internship. Possess strong written and verbal communication skills. Strong background and interest in one or more of: software development; data analysis; electrical engineering; embedded software development; systems engineering; engineering design validation, verification, and test. Desired Skills Experience with electrical design, PCB layout, and/or ECAD. Understanding of RF and antenna technology. Skills in software development for embedded microcontrollers. Experience with FPGAs and firmware development. Proficiency in object-oriented programming (e.g. Java, JavaScript, C++, Python) with the ability to write clean, well-documented code. Competency in data analysis and visualization tools such as Excel or MATLAB. Familiarity with GitHub/GitLab, command line, and/or Linux. Confidence in using lab tools such as oscilloscopes, multimeters, power supplies, etc. Experience with engineering product prototyping, production, or integration test design/testing. Knowledge in systems engineering, system integration, and/or design documentation. Participation in extracurricular student engineering competitions. Physical Demands Ability to work in an office and manufacturing environment (Constant) Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Constant) Hourly Rate Range: $20 - $25 Clearance Level No Clearance ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR

ReqID: WAS00007C **See it differently** You see the world through a unique lens and that's exactly what we need. We embrace how you see things differently - it's essential for creating a sustainable future. Arup is a global consultancy with advisory and technical expertise across more than 150 disciplines. We guide, plan and design the future of the built environment. Globally, each year we recruit hundreds of interns to help us see things differently and solve the most complex challenges facing our clients, climate and communities. **The Opportunity** + Design power distribution, lighting controls, fire alarm systems, grounding and lightning protection systems + Lighting photometric calculations + Circuitry for Power and Lighting devices + Model electrical systems for projects in 3D using Revit (on the job training provided) + Development of reports and electrical calculations + Work with other disciplines and/or vendors to gain knowledge on new subjects + Attend meetings - listen, ask questions. Be involved in discussions with other disciplines and Architects to gain knowledge & experience + Contribute to internal process improvement initiatives **Is this role right for you?** **Required** + Pursuing a Bachelor's Degree in Electrical Engineering (BSEE), Architectural Engineering (BSAE) or similar degree + Demonstrated interest in the electrical engineering industry + Skills in planning and organizing + Ability to communicate thoughts and technical ideas in an accessible way, both in person and in writing + Attitude of taking independent initiative, exhibiting creative problem-solving, eagerness to learn, while remaining dedicated to teamwork + The ability to prioritize effectively, balance assigned work and exceptional organization skills required for our constantly evolving environment + Strong interpersonal and communication skills essential for team-based working + Presentation skills with colleagues + Must be eligible to work in the United States without the need for employer sponsored work authorization now or in the future. **Preferred** + Coursework in building systems design, electrical power systems design, control systems, electric machines, and codes and standards + Electrical testing + Interest in sustainability as evidenced by extracurricular activities, etc. + Academic research, coursework, or other experience with alternative energy systems and other technologies new to the construction industry + Experience with Revit, AGI 32, SKM Power Tools, ETAP + Coding skills in C# and/or Python with an interest in design automation + Teamwork and leadership such as professional accomplishment or honor society We're looking for: + Changemakers: A passion for sustainable development and creating a better world is key. + Innovative minds: We're looking for critical thinkers who embrace new ideas and challenge the status quo. + Growth seekers: You have a growth mindset, always eager to learn and explore new ways of working. + Adaptable adventurers: You're ready to take on any challenge that comes your way. **What we offer you** At Arup, we care about each member's success, so we can grow together. Our intern experience offers you: + Purpose-driven work: Join an employee-owned team tackling climate, biodiversity, and social challenges, aligned with the UN's Sustainable Development Goals. + Create remarkable outcomes: We trust you to explore challenges, drive change, and create lasting outcomes for our clients, climate and communities. + Inclusive culture: Your unique perspective matters. We celebrate diversity and foster a supportive, social environment where everyone belongs. + Career growth: Grow your skills through innovative projects, training, and mentoring in a supportive environment. We invest in your future. + Work-life balance: Our hybrid model offers flexibility to balance work with your life. We balance your needs with our clients and communities **Washington DC Hiring Range -** The good faith base salary hiring range for this job if performed in Washington DC is $24.00 to $43.50 per hour. This range is commensurate with experience, educational background, and skill level. Benefits are not included in the base salary. Please note hiring ranges for candidates performing work outside of Washington DC will differ. **Next Steps** We will be reviewing our candidates for this position on a rolling basis. Once you've submitted your application, we'll invite you to showcase your skills through a pre-recorded video interview if you've met the minimum requirements. After reviewing your submission, a member of our team will get in touch with you to discuss the next steps. Arup is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of a protected veteran, or disability. Stay safe online. Recruitment fraud is on the rise, and Arup's name, logo, and branding have been used in fraudulent job advertisements. Arup will never ask for bank information as part of our recruitment process. **Different people, shared values** Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at. \#goarup \#LI-DF1 EOE-Protected Veterans/Disability

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Are you ready to take your engineering skills to the next level? Parsons is seeking a highly motivated and talented Electrical/Hardware Engineering Intern to join our dynamic team! This is an exciting opportunity to gain hands-on experience in designing, developing, and testing cutting-edge analog, digital, and RF circuitry. If you're passionate about innovation and eager to contribute to impactful projects, we want to hear from you! What You'll Be Doing: As an Electrical Engineering Intern, you will work alongside experienced engineers to: * Electrical Schematic Capture: Create and refine detailed electrical schematics for various projects. * PCB Layout: Design printed circuit boards (PCBs) to support project requirements. * Analog Circuit Simulations: Perform simulations to analyze and optimize analog circuit designs. * RF Circuit Simulations: Model and evaluate RF circuits to ensure optimal performance. * Antenna Design: Develop innovative antenna solutions tailored to project specifications. * Antenna Testing: Conduct rigorous testing to validate antenna designs and performance. * Laboratory Testing: Utilize state-of-the-art equipment to test and troubleshoot electrical systems and components. What Required Skills You'll Bring: To excel in this role, you should have: * Circuit Analysis Expertise: Strong understanding of circuit analysis principles and techniques. * Familiarity with Electrical Laboratory Test Equipment: Hands-on experience with oscilloscopes, spectrum analyzers, signal generators, and other lab tools. * RF and Antenna Simulations: Proficiency in simulation tools such as HFSS, CST, or similar software. * Knowledge of Analog and RF Fundamentals: Solid grasp of the principles underlying analog and RF circuitry. What Desired Skills You'll Bring: While not required, the following skills will set you apart: * Experience with PCB design software (e.g., Altium Designer, Eagle, or KiCad). Knowledge of electromagnetic theory and antenna propagation. Familiarity with MATLAB or Python for data analysis and simulation. Strong problem-solving skills and attention to detail. Why Join Parsons? At Parsons, we foster a culture of innovation, collaboration, and growth. As an intern, you'll have the opportunity to: * Work on meaningful projects that make a real-world impact. * Collaborate with industry-leading experts in electrical engineering. * Develop technical skills and gain valuable professional experience. * Be part of a company that values diversity, inclusion, and career development. Ready to make an impact? Apply today and start your journey with Parsons! Security Clearance Requirement: None This position is part of our Federal Solutions team. The Federal Solutions segment delivers resources to our US government customers that ensure the success of missions around the globe. Our intelligent employees drive the state of the art as they provide services and solutions in the areas of defense, security, intelligence, infrastructure, and environmental. We promote a culture of excellence and close-knit teams that take pride in delivering, protecting, and sustaining our nation's most critical assets, from Earth to cyberspace. Throughout the company, our people are anticipating what's next to deliver the solutions our customers need now. Salary Range: $21.88 - $38.27 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as 401K! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to ************************************************

For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start May 2026 and go through Summer 2026. Dates are flexible with school calendar. Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. Job Description:This position provides a unique opportunity for hands-on training in electrical design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team and independently. Our engineers will teach the student co-op how we design and implement electrical systems/infrastructure as well as energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. Job Functions: (may include but are not limited to) Learn and implement the electrical system basics such as power, power distribution, lighting & controls, fire alarm systems for new constructions and renovation design projects while supporting our engineering team. Produce detailed layout and equipment details of electrical systems of buildings, Produce one-line diagrams/schematics, Assist the design team in the process of assembling organized sets of drawings, May assist in the data collection and/or field verification, and Work in conjunction with designers and engineers to help develop all aspects of a project. Requirements: Pursuing a bachelor's degree in Electrical Engineering or Architectural Engineering, preferably a sophomore (2nd year) or a junior (3rd year), Strong interest in Building Systems Electrical Engineering, AutoCAD and REVIT experience preferred, Strong interpersonal and communication skills, Proficiency with Microsoft Word and Excel, Ability to work both independently and with a team, Ability to work full time throughout the co-op term, Ability to travel locally for job site inspections, field work, etc. We are unable to provide immigration sponsorship for this position. #LI-RH1 #LI-Onsite

Internship Description When you walk into a building do you immediately start analyzing it? Do you wonder about the lighting and power systems? Well, so do we. We are looking for some passionate interns to join our team of folks who are curious about building systems. The bulk of our projects are renovations, frequently of only the MEP/FP systems, so it makes for some interesting and challenging projects. The fun of renovation work is dealing with the existing constraints imposed by the structure or building operations. We find ourselves regularly solving problems like how to make the equipment fit into an existing building or figuring out how the contractor will build your design. We are such great problem solvers that 95% of our clients would refer us to others. Clients choose us when they want the job done right the first time. We serve our clients' missions as if they were our own, whether supporting the warfighter or our nation's finest government and educational institutions. With our headquarters located in Northern Virginia, our interesting client list, and a focus on renovation, you will get to go into some interesting buildings, sometimes seeing history from the inside out. Check out our projects page for some examples of our work. Curious about building systems? Let's see what we can do together! WHAT SUMMER CONSULTANTS CAN DO FOR YOU Give real world MEP/FP industry experience. Provide hands-on experience with tools such as Revit, AutoCAD, and lighting selection and arc flash modeling software. Provide you with different projects - we have never had identical projects and we rarely have “typical” projects. Buildings are unique and so are their systems. Help you get your boots dirty learning from experienced engineers in the field. Provide a fun, small, and exciting work environment. WHAT YOU CAN DO FOR SUMMER CONSULTANTS Dive into designing quality projects from day one. Not just drafting them, but surveying existing conditions, AGI lighting and power calculations and layouts and lots more fun stuff. Help us tackle our clients' problems. Requirements WHAT YOU SHOULD BRING WITH YOU 2 years completed towards a Bachelor's degree in Electrical Engineering, Electrical Engineering Technology or Architectural Engineering (Electrical / Lighting focus). Excellent written and verbal English communication skills. Strong skills in Microsoft Word and Excel. AutoCAD and Revit experience a plus. Ability to conduct day-long field surveys outdoors and indoors in conditioned and unconditioned spaces, including walking up to 10-20k steps in a day, climbing up and down a 6-foot ladder, kneeling, squatting, and bending. Ability to obtain site access at client locations. COMPANY BENEFITS Sick Leave: You will earn one hour of sick leave each 30 hours worked. The company reimburses costs for parking and travel to job sites. EQUAL OPPORTUNITY EMPLOYER We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, pregnancy, age, national origin, disability status, protected veteran status, or any other characteristic protected by federal, state, or local laws.

Job DescriptionDescription: When you walk into a building do you immediately start analyzing it? Do you wonder about the lighting and power systems? Well, so do we. We are looking for some passionate interns to join our team of folks who are curious about building systems. The bulk of our projects are renovations, frequently of only the MEP/FP systems, so it makes for some interesting and challenging projects. The fun of renovation work is dealing with the existing constraints imposed by the structure or building operations. We find ourselves regularly solving problems like how to make the equipment fit into an existing building or figuring out how the contractor will build your design. We are such great problem solvers that 95% of our clients would refer us to others. Clients choose us when they want the job done right the first time. We serve our clients' missions as if they were our own, whether supporting the warfighter or our nation's finest government and educational institutions. With our headquarters located in Northern Virginia, our interesting client list, and a focus on renovation, you will get to go into some interesting buildings, sometimes seeing history from the inside out. Check out our projects page for some examples of our work. Curious about building systems? Let's see what we can do together! WHAT SUMMER CONSULTANTS CAN DO FOR YOU Give real world MEP/FP industry experience. Provide hands-on experience with tools such as Revit, AutoCAD, and lighting selection and arc flash modeling software. Provide you with different projects - we have never had identical projects and we rarely have “typical” projects. Buildings are unique and so are their systems. Help you get your boots dirty learning from experienced engineers in the field. Provide a fun, small, and exciting work environment. WHAT YOU CAN DO FOR SUMMER CONSULTANTS Dive into designing quality projects from day one. Not just drafting them, but surveying existing conditions, AGI lighting and power calculations and layouts and lots more fun stuff. Help us tackle our clients' problems. Requirements: WHAT YOU SHOULD BRING WITH YOU 2 years completed towards a Bachelor's degree in Electrical Engineering, Electrical Engineering Technology or Architectural Engineering (Electrical / Lighting focus). Excellent written and verbal English communication skills. Strong skills in Microsoft Word and Excel. AutoCAD and Revit experience a plus. Ability to conduct day-long field surveys outdoors and indoors in conditioned and unconditioned spaces, including walking up to 10-20k steps in a day, climbing up and down a 6-foot ladder, kneeling, squatting, and bending. Ability to obtain site access at client locations. COMPANY BENEFITS Sick Leave: You will earn one hour of sick leave each 30 hours worked. The company reimburses costs for parking and travel to job sites. EQUAL OPPORTUNITY EMPLOYER We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, pregnancy, age, national origin, disability status, protected veteran status, or any other characteristic protected by federal, state, or local laws.

Join Us: Finding a better way. It's what we do, in creating solutions, helping people, and improving our world. Imagine yourself at CHA, tackling some of the world's most critical challenges - around clean water, safe roads, efficient energy, resilient power sources, and buildings. Imagine yourself contributing your skills and passion to creating a world that is more sustainable, more diverse, and one that leans forward towards a better future. Our people are approachable, caring, down to earth, plugged in, and hands-on. They are skilled, thoughtful, and innovative. Can you imagine yourself here? CHA is looking for someone with your passion to join our 2026 Summer Internship Program! If you are earning your degree in Electrical Engineering and are interested in an internship working in one of our many disciplines, apply today to join us in finding a better way. What You'll Do: CHA's Internship Program will ensure you are ready to make the transition from student to professional. Over our 10-week program, you will have plenty of opportunities to connect with people who will help you on your career journey. You will connect with your peers through group projects, planned social events, and working alongside one another in the office or field. You will connect with professionals across the business, collaborating on a company projects and important work that will have a real, positive impact on the world we all live in. The connections you make during your CHA Internship can play a critical role as you complete your studies and transition into your professional career. The Internship Program here at CHA aims to prepare students for the professional working environment through opportunities to work as part of a team, developing the planning skills to effectively balance work demands with your personal life, and figuring out how to navigate different personalities to ensure team success. Our program is more than just an internship; you will learn about yourself; identify your career passions and go after them. As a CHA Intern you will experience working in your field - there is nothing like real world experience! An internship with CHA will help you clarify and bring into focus your future career goals, it will give you the opportunity to try new things, explore and discover what you want for your future. So, join us for summer 2026; let's find a better way together! Want to learn more about how CHA is finding a better way? Visit us online at CHAsolutions.com What You Bring: * Working towards an Electrical Engineering degree * Attending a full time matriculated and nationally accredited Bachelor or Graduate program. * Completed one full year of college (rising sophomore). * Candidates going into their junior or senior year of college are preferred. * May 2026 graduates will not be accepted for CHA's Internship program. * Experience with Microsoft Office required. * Experience with AutoCAD preferred. * Must possess the ability to work in a team environment. * Good oral and written communication skills required. Culture/EEO Statement: At CHA, we work every day to create solutions, help people, and improve our world, committed to creating and fostering excellence in our diverse and highly talented teams. Our teams continually strive to find better ways - always searching, never settling - to achieve extraordinary results. Our values around hiring, training, and community engagement reflect a company culture that is inclusive and forward leaning, always pushing the limits of what is possible. We as an organization celebrate the values of inclusion and equality, and advocate for the full participation of all people in an environment free of discrimination. To support these values, we invite all qualified applicants to be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, age, disability, protected veteran status, or any other characteristic protected by law.

At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven". We have been in business for 110 years and we are known for our quality work and quality employees. This is your chance to join our team - help us to design the infrastructure and buildings that improve the world! The Electrical Engineer Intern, under direct supervision of senior staff, will work on projects relating to the design of electrical systems for government, military, commercial, industrial, municipal and institutional facilities. Responsibilities: The Electrical Engineer will assist in the creation of engineering deliverables such as drawings, reports, and calculations, while following WRA's engineering guidance, schedule, budget, and quality requirements. The Electrical Engineer will work closely with design team members - including architects and other engineers - to produce a coordinated design. Requirements: * Currently pursuing a Bachelor's of Science degree in Electrical or Architectural Engineering from an ABET accredited program * Must have the ability to effectively communicate orally/written at all levels of the organization. * Must have the ability to work independently and as part of a team. * Must have the ability to handle multiple assignments. * US Citizenship required Required Submissions: * Resume * A copy of current, or most recent, school transcript (If you are applying via a 3rd party site that does not allow attachments, please email transcript to ******************) WRA is an equal opportunity/affirmative action employer and complies with all applicable anti-discrimination laws. Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) The expected compensation range for this position is $20.00 - $23.50 per hour. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. * Not accepting resumes from 3rd party recruiters for this position * Position # 2912 #LI - Onsite #LI - Internship

For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start May 2026 and go through Summer 2026. Dates are flexible with school calendar. Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. Job Description:This position provides a unique opportunity for hands-on training in electrical design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team and independently. Our engineers will teach the student co-op how we design and implement electrical systems/infrastructure as well as energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. Job Functions: (may include but are not limited to) Learn and implement the electrical system basics such as power, power distribution, lighting & controls, fire alarm systems for new constructions and renovation design projects while supporting our engineering team. Produce detailed layout and equipment details of electrical systems of buildings, Produce one-line diagrams/schematics, Assist the design team in the process of assembling organized sets of drawings, May assist in the data collection and/or field verification, and Work in conjunction with designers and engineers to help develop all aspects of a project. Requirements: Pursuing a bachelor's degree in Electrical Engineering or Architectural Engineering, preferably a sophomore (2nd year) or a junior (3rd year), Strong interest in Building Systems Electrical Engineering, AutoCAD and REVIT experience preferred, Strong interpersonal and communication skills, Proficiency with Microsoft Word and Excel, Ability to work both independently and with a team, Ability to work full time throughout the co-op term, Ability to travel locally for job site inspections, field work, etc. We are unable to provide immigration sponsorship for this position. #LI-RH1 #LI-Onsite

About Burns: Burns Engineering provides professional engineering design and project management services for transportation, facilities, and infrastructure projects. We help our clients attain their strategic goals and initiatives through successful large-scale infrastructure projects. Burns' full-service capabilities include mechanical, electrical, civil, structural, transportation, and energy consulting engineering. Recently voted a Top Workplace by Philly.com, we credit our strength as an organization to our talented, driven, vibrant team. Burns is an ENR Top 500 Firm, and has been named an MEP Giant by Consulting-Specifying Engineer Magazine, as well as a Hot Firm by Zweig. We are industry experts, proven leaders, innovative thinkers, and team players. We put our clients' successes and best interests first, because their success is our success. We have fun at work because we love making a difference in the world. We are looking for high-energy, bright, collaborative individuals who want the opportunity to “write their own story” with us. Railroad & Transit Team Burns provides design and construction solutions to help maintain, improve, and expand the nation's railroad and transit infrastructure. We have designed the implementation of critical programs across the country, and support the renewed emphasis on a public transit-oriented lifestyle. Burns is currently seeking an Electrical Engineering Associate to join our Railroad & Transit team in Washington, D.C. SUMMARY Electrical Engineering Associate is responsible for preparation of designs, project layouts and contract documents in accordance with company design standards and client requirements. According to project size, may be responsible for the project team in the production of projects in time, within budget, and of high technical quality by performing the following duties. ESSENTIAL DUTIES & RESPONSIBILITIES Designs and specifies equipment, facilities, components, and systems for the railroad and transit, and aviation and general infrastructure industries. Participates in the execution of specific engineering studies, design analyses and cost estimates. Participates in client meetings and performs on-site inspections during construction and coordinates design requirements with contractors and equipment suppliers under the direction of the senior technical staff. Capability to design drawing, write and review specifcations, and develop calculation reports. Uses computer assisted engineering and design software and equipment to perform engineering tasks. Utilizes and assists less experienced staff in understanding company technical policies and procedures during the execution of projects for clients. Participates in the execution of the design process on assigned projects and requests assistance from senior technical staff when needed. Assists the design team in the coordination of project design with other disciplines. Participates in the review of shop drawings, product data, RFI, and records changes. Coordinates design requirements with outside consultants and contractors as necessary. Performs activities to ensure that construction, installation, and operational testing conform to functional specifications and customer requirements. Responsible for knowledge of company technical policies and procedures. EDUCATION & EXPERIENCE Bachelor's (B.S.) Engineering degree in Electrical Engineering from four-year college or university from an accredited program At least 2-5 years of related experience Preference for EIT Technical expertise with power systems and utility coordination. A demonstrated ability to evaluate the technical requirements of scope of work, specifications, design criteria, directive drawings, standard drawings, A demonstrated ability to administer all project general and technical data and reports and to communicate verbally and in writing to all parties involved.

AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking an Associate Electrical Engineer to join our team. This role involves working closely with senior engineers to design and test electrical harnesses for satellites and associated ground support equipment. The ideal candidate is detail-oriented, collaborative, and eager to contribute to cutting-edge aerospace projects. Key Responsibilities Collaborate with engineering teams to design, test, and support the integration of electrical harnesses for spacecraft and ground systems. Create detailed electrical schematics, select wiring, connectors, back shells, and other harness components, ensuring compliance with company and industry standards. Develop and execute test plans to verify functionality, reliability, and performance of electrical harness systems. Conduct thorough testing and validation procedures, analyze test data, and troubleshoot issues to meet design requirements. Prepare comprehensive technical documentation, including interface control documents, system schematics, block diagrams, harness drawings, and installation procedures. Work closely with multidisciplinary teams (power, RF, command and data handling, and other subsystems) to ensure seamless integration of electrical systems. Qualifications Education: Bachelor's degree in electrical engineering, Mechanical Engineering, or a related field. Experience: A minimum of 0-2 years of industry experience or recent graduate with hands-on project experience. Preferred Qualifications Knowledge of space environment and industry standards. Understanding of harness design principles, cable routing, shielding, and EMI/EMC considerations. Proficiency in CAD software for harness design (e.g., Autodesk Inventor, AutoCAD Electrical, CATIA, Mentor Graphics). Experience with electrical simulation and analysis tools (e.g., SPICE, MATLAB). Prior experience in electrical harness design through internships, co-op programs, or academic projects related to aerospace engineering. Soft Skills Strong interpersonal skills and ability to collaborate effectively within cross-functional teams. Excellent written and verbal communication skills. Analytical mindset with strong problem-solving and troubleshooting abilities. Ability to think critically, propose creative solutions, and adapt to evolving project requirements. Meticulous attention to detail to ensure accuracy in documentation and design. Technology Stack CAD tools: Autodesk Inventor, AutoCAD Electrical, CATIA, Mentor Graphics. Electrical simulation tools: SPICE, MATLAB. Familiarity with schematic capture tools. Physical Requirements Ability to work in a standard office environment and use a computer for extended periods. Occasional hands-on work with hardware in lab environments. This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands . AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

The Advanced Warfare Technology Division (AWT) of the Leidos Innovations Center (LInC) is looking for a Hardware Design Engineer to work with a multi-disciplined design team (electrical & mechanical engineers, systems engineers, software engineers, etc.) to design, develop, simulate, and integrate challenging circuit card designs for DSP and RF sensor systems based on given project requirements. Candidates will have a strong hardware background in high-speed digital circuit design, schematic entry, printed-circuit board fabrication, and conduction-cooled circuit card assembly design, in support of a fast-paced, multi-disciplinary design team. This role will also support integration, test, and verification in the final products. Primary Responsibilities Collaborate with a multi-disciplined engineering design team to design, test and integrate sophisticated digital designs hardware and firmware including RF sensor systems. Review and analyze high level system requirements, participate in defining, deriving and allocating these requirements into lower-level hardware requirements. Translate conceptual designs into design specifications and implement within detailed electrical designs involving electrical schematics, complete bills of materials (BOMs), Printed Circuit Board Design (PCB), layout techniques, documents and fabrication drawings. Analyze, design, develop and test embedded electronic circuit card assemblies (CCA's) containing Programmable Logic Devices (RFSoC, SoC, FPGA), data conversation, signal processing/filtering, high speed digital and analog, RF & amplification, power supply & power management circuitry. Analyze schematic diagrams for either custom or commercial-off-the shelf (COTS) electronic hardware involving high-speed digital and/or analog circuitry in associated FPGA-centric systems. Analyze, design, simulate, and implement designs which interface to common high-speed signaling standards such as SERDES, PLLs, and/or protocols such as PCIe Gen4, JESD204B/C, LVDS, etc. Evaluate, select, specify, design, modify, test, and/or integrate sensors, electronic modules (custom and COTS), cables, connectors, power subsystems. Apply basic knowledge of HDL design using VHDL/Verilog to write, simulate, synthesize and test designs used within various logic devices (SoC,FPGA/CPLD). Conduct experimental tests on equipment, evaluate results, followed by specification development for selecting components and equipment for deliverable systems. Generate and maintain requirements documents, functional specification documents, interface control documents and engineering drawings while applying configuration management policies. Develop project test plans and test procedures, provide test planning support, assist in the execution of both lab testing and field testing. Provide field support planning, mobilization/de-mobilization support, and other field support in general. Interact with outside customers, suppliers, and functional peer groups. Provide status reports to project managers and/or project lead as required. Some travel and work at remote sites for limited time periods will be required. Basic Qualifications BS in Electrical Engineering or Computer Engineering or related degree Minimum of 4 years of relevant experience Ability to be granted a security clearance Able to work and collaborate within a multidisciplinary engineering environment. Strong debug and problem-solving skills Familiarity or experience with one or more of the following: Schematic entry / PCB design tools (Altium, Cadence Allegro/OrCAD, KiCAD, or similar) Printed Circuit Board (PCB) Design involving parts selection, BOM creation, placement, high speed signal routing, fabrication drawings and documentation. HDL Design / Development (VHDL/Verilog) with System-On-Chip devices (SOC's), FPGA's, CPLD/s, and/or Microcontrollers. Vendor Design tools and Design Environments (IDE's) such as Xilinx Vivado, Vitis, Quartus, Questa Sim, Libero, Synplicity, etc. Lab test equipment - Oscilloscope, Voltmeter, Logic Analyzer, Spectrum Analyzer Revision control (git, SVN, ClearCase, etc.) Interfaces: DDRx, ADC/DACs, SerDes, PCIe, JTAG Hands on Lab testing and Integration Preferred Qualifications Master's Degree in Electrical or Computer Engineering Existing Secret (or above) Clearance Experience supporting or leading different phases of the product development lifecycle, including requirements analysis, system design, product development, integration, test, technical documentation and review of complex systems. Design, testing, integration and troubleshooting electronic circuits within embedded systems including digital, analog and radio frequency (RF) subsystems. Working Experience with the following: High speed PCB design techniques (> 1GHz) DSP fundamentals and FPGA implementation Schematic/PCB design tools such as Altium Designer, Cadence Allegro/OrCAD or KiCAD, or similar. Simulation / Validation and Designer-Level Testbench generation (VHDL/SystemVerilog) - using vendor tools or third party (Xilinx simulator, Siemens Modelsim/Questa, etc.) Script Generation (Perl, TCL, Python, etc) Microchip EDA tools and flows (Synopsys, Cadence, etc.) System Verilog / UVM High speed protocols like JESD204B, LVDS, PCIe, SERDES Performance characteristics of Analog Data Converters (ADCs/DACs) Digital Signal Processing (DSP) modeling using tools like MATLAB/Simulink C/C++ language software development for embedded, real-time systems All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #J-18808-Ljbffr

At AV, we understand that a valuable internship should provide meaningful learning and real-world experience. Our Summer Internship Program offers students the opportunity to work alongside experienced engineers and scientists, gaining hands-on exposure to the technologies and challenges that drive our industry. Interns contribute directly to active projects, developing practical skills and building professional relationships in a collaborative environment as a valued member of the team. Our internship program is highly selective, ensuring that each intern receives personalized mentorship and opportunities to engage deeply with our engineering teams. We're seeking motivated students with an interest in electrical engineering and RF technologies to assist in developing and testing custom solutions for next-gen radar, phased array telemetry, radio, and perimeter intrusion detection systems. **Responsibilities** + Work with a team of engineers, scientists, and project managers. + Perform technology research, including field surveys, trade studies, and comparative analysis. + Assist in design and testing of prototype and production systems using software and/or electrical engineering skills. + Utilize and/or modify existing code bases and libraries; create and shape new functionality. + Conduct field testing and evaluation of components, systems, and products. + Develop firmware for embedded systems. **Requirements** + Must be a high school graduate. + Due to the nature of the role U.S. Citizenship is required. + Currently enrolled or recently completed post-secondary program in Electrical Engineering, Computer Engineering, Systems Engineering, or a related field. + Willing and able to work on-site at the Germantown, MD AV office for the duration of the internship. + Possess strong written and verbal communication skills. + Strong background and interest in one or more of: software development; data analysis; electrical engineering; embedded software development; systems engineering; engineering design validation, verification, and test. **Desired Skills** + Experience with electrical design, PCB layout, and/or ECAD. + Understanding of RF and antenna technology. + Skills in software development for embedded microcontrollers. + Experience with FPGAs and firmware development. + Proficiency in object-oriented programming (e.g. Java, JavaScript, C++, Python) with the ability to write clean, well-documented code. + Competency in data analysis and visualization tools such as Excel or MATLAB. + Familiarity with GitHub/GitLab, command line, and/or Linux. + Confidence in using lab tools such as oscilloscopes, multimeters, power supplies, etc. + Experience with engineering product prototyping, production, or integration test design/testing. + Knowledge in systems engineering, system integration, and/or design documentation. + Participation in extracurricular student engineering competitions. **Physical Demands** + Ability to work in an office and manufacturing environment (Constant) + Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Constant) **Hourly Rate Range: $20 - $25** **Clearance Level** No Clearance **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start ~August 2026 and go through Fall 2026. Dates are flexible with school calendar. Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. Job Description:This position provides a unique opportunity for hands-on training in electrical design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team and independently. Our engineers will teach you how we design and implement electrical systems/infrastructure as well as energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects and become an important part of our design team. Job Functions: (may include but are not limited to) Learn and implement the electrical system basics such as power, power distribution, lighting & controls, fire alarm systems for new constructions and renovation design projects while supporting our engineering team. Produce detailed layout and equipment details of electrical systems of buildings, Produce one-line diagrams/schematics, Assist the design team in the process of assembling organized sets of drawings, May assist in the data collection and/or field verification, and Work in conjunction with designers and engineers to help develop all aspects of a project. Requirements: Pursuing a bachelor's degree in electrical engineering or architectural engineering, preferably a sophomore (2nd year) or a junior (3rd year), Strong interest in Building Systems Electrical Engineering, AutoCAD and REVIT experience preferred, Strong interpersonal and communication skills, Proficiency with Microsoft Word and Excel, Ability to work both independently and with a team, Ability to work full time in the Columbus office throughout the co-op term, Ability to travel locally for job site inspections, field work, etc. No immigration sponsorship available for this position. #LI-RH1 #LI-Onsite

Job Description At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven". We have been in business for 110 years and we are known for our quality work and quality employees. This is your chance to join our team - help us to design the infrastructure and buildings that improve the world! The Electrical Engineer Intern, under direct supervision of senior staff, will work on projects relating to the design of electrical systems for government, military, commercial, industrial, municipal and institutional facilities. Responsibilities: The Electrical Engineer will assist in the creation of engineering deliverables such as drawings, reports, and calculations, while following WRA's engineering guidance, schedule, budget, and quality requirements. The Electrical Engineer will work closely with design team members - including architects and other engineers - to produce a coordinated design. Requirements: Currently pursuing a Bachelor's of Science degree in Electrical or Architectural Engineering from an ABET accredited program Must have the ability to effectively communicate orally/written at all levels of the organization. Must have the ability to work independently and as part of a team. Must have the ability to handle multiple assignments. US Citizenship required Required Submissions: Resume A copy of current, or most recent, school transcript (If you are applying via a 3rd party site that does not allow attachments, please email transcript to ******************) WRA is an equal opportunity/affirmative action employer and complies with all applicable anti-discrimination laws. Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) The expected compensation range for this position is $20.00 - $23.50 per hour. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. ***** Not accepting resumes from 3rd party recruiters for this position ***** Position # 2912 #LI - Onsite #LI - Internship

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), **onsite** position with a competitive hourly pay rate and eligible for overtime pay. **This position will start ~August 2026 and go through Fall 2026. Dates are flexible with school calendar.** Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. **Job Description:** This position provides a unique opportunity for hands-on training in electrical design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team and independently. Our engineers will teach you how we design and implement electrical systems/infrastructure as well as energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects and become an important part of our design team. **Job Functions: (may include but are not limited to)** + Learn and implement the electrical system basics such as power, power distribution, lighting & controls, fire alarm systems for new constructions and renovation design projects while supporting our engineering team. + Produce detailed layout and equipment details of electrical systems of buildings, + Produce one-line diagrams/schematics, + Assist the design team in the process of assembling organized sets of drawings, + May assist in the data collection and/or field verification, and + Work in conjunction with designers and engineers to help develop all aspects of a project. **Requirements:** + Pursuing a bachelor's degree in electrical engineering or architectural engineering, preferably a sophomore (2nd year) or a junior (3rd year), + Strong interest in Building Systems Electrical Engineering, + AutoCAD and REVIT experience preferred, + Strong interpersonal and communication skills, + Proficiency with Microsoft Word and Excel, + Ability to work both independently and with a team, + Ability to work full time in the Columbus office throughout the co-op term, + Ability to travel locally for job site inspections, field work, etc. No immigration sponsorship available for this position. \#LI-RH1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start **May 2026** **and go through Summer 2026. Dates are flexible with school calendar** . Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. **Job Description:** This position provides a unique opportunity for hands-on training in electrical design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team and independently. Our engineers will teach the student co-op how we design and implement electrical systems/infrastructure as well as energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. **Job Functions: (may include but are not limited to)** + Learn and implement the electrical system basics such as power, power distribution, lighting & controls, fire alarm systems for new constructions and renovation design projects while supporting our engineering team. + Produce detailed layout and equipment details of electrical systems of buildings, + Produce one-line diagrams/schematics, + Assist the design team in the process of assembling organized sets of drawings, + May assist in the data collection and/or field verification, and + Work in conjunction with designers and engineers to help develop all aspects of a project. **Requirements:** + Pursuing a bachelor's degree in Electrical Engineering or Architectural Engineering, preferably a sophomore (2nd year) or a junior (3rd year), + Strong interest in Building Systems Electrical Engineering, + AutoCAD and REVIT experience preferred, + Strong interpersonal and communication skills, + Proficiency with Microsoft Word and Excel, + Ability to work both independently and with a team, + Ability to work full time throughout the co-op term, + Ability to travel locally for job site inspections, field work, etc. We are unable to provide immigration sponsorship for this position. \#LI-RH1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**