Electrical engineer internship jobs in Flagstaff, AZ

Job Title: Electrical Engineer Tax Work Location: Chandler - 1575 S. Price Road (AZ23), Arizona CLEARANCE TYPE: Ability to obtain a Secret clearance Rate: $55/Hr. W2 • Based on specific objectives, perform analysis, design, and/or test of complex designs. • Perform comprehensive review of internal, external, industry, customer, and range requirements to support system and subsystem designs. • Perform detailed analyses to support/verify designs and conduct briefings to management and customers. • Lead development, coordination, and execution of test programs required to evaluate the design. • Lead troubleshooting efforts and comprehensive failure investigations. • Mentor other engineers from a technical standpoint as well as perform senior peer review. • Collaborate early and often with other IPTs, engineering disciplines and operations/manufacturing groups. Job responsibilities: • Broad understanding and application of industry and company electrical engineering technical standards. • Broad technical expertise and working knowledge of other related disciplines. • Prepares and presents electrical engineering materials for Requirements and Design Reviews. • Perform qualification acceptance testing, characterization testing, troubleshooting, and test data review of completed complex system designs. • Perform data analysis to identify trends that may indicate out of tolerance or degraded part performance. • Perform testing to characterize off-nominal behavior of components. • Actively and effectively participates and contributes in a positive manner while supporting team decisions and goals. • Makes an extra effort to provide quality internal and external customer service. • Constantly seeks new sources of information and provides information necessary to meet customer needs. • Disciplined with escalation when required. • Derives and decomposes requirements through multiple sources of documentation and design meetings. • Evaluate uncertainty and risks associated with requirements and designs. • Participates in trade studies for both internal projects and procured equipment. • Act with safety as your number one priority through every aspect of the role. • Provides formal peer review of engineering designs or analyses for team members. Basic Qualifications • BS in Electrical Engineering and 2 Years' Experience or 0 years' Experience with Masters • U.S. Citizenship is required • Ability to obtain and maintain a US DoD Secret Security clearance is required Preferred Qualifications • Active Secret Security Clearance, or higher • Experience with missile systems and associated standards • Prior experience with the design, test, and/or integration and deployment of electrical components or subsystems • Release of engineering documentation including technical drawings, specifications, and test procedures. • Burndown of nonconformances and/or root cause failure analysis of electronic systems. • Evaluate uncertainty and risks associated with requirements and designs. • Derives and decomposes requirements through multiple sources of documentation and design meetings. • Problem solving not only for technical issues, but also for schedule, cost, resource and other project challenges. • Mentoring and cross-training team members across a diverse set of technologies and electrical system architectures used to meet customer requirements. • Knowledgeable with the use of basic test equipment such as power supplies, oscilloscopes, DMMs, and electronic loads. • Experience using analytical software tools, such as MATLAB or Python, to analyze and reduce data to identify key characteristics and trends.

Tessenderlo Kerley, Inc. is a company of diverse businesses unified by shared values and vision. We serve the agriculture, mining, industrial and water reclamation markets with a broad range of products and technologies, worldwide. Serving these customers well is a passion and a commitment-one that the people of Tessenderlo Kerley find rewarding, empowering and meaningful. If you want the work you do to make a positive impact on the world in which we live, and work alongside innovative, quality-focused people of vision, Tessenderlo Kerley is the right place for you. Is your CV ready If so, and you are confident this is the role for you, make sure to apply asap. Are you an experienced Electrical Engineer ready to take the next step in your career? Do you enjoy designing and troubleshooting complex systems while collaborating across disciplines in a fast-paced industrial environment? If so, we invite you to join our Technical Services team as an Electrical Engineer at our Corporate Office in Phoenix, Arizona! Our ideal location is the Phoenix area, where this position is based. However, for highly qualified candidates, we may offer hybrid or remote flexibility if you reside near one of our centrally located plants. Occasional onsite presence will be required for project execution, training, and plant support. Eligible plant locations include: Ponca City & Tulsa Oklahoma Coffeyville, Kansas Billings, Montana Defiance, Ohio Why Join Us? âš¡ Challenging & Varied Projects â€" Work on electrical design for industrial chemical facilities, from power distribution and schematics to plant support and turnarounds. xevrcyc PandoLogic. Keywords: Electrical Engineer, Location: Phoenix, AZ - 85013

The Senior Electrical Designer, EIT or PE, will lead and manage the design of complex electrical systems for industrial projects. This role requires a deep understanding of electrical principles, advanced design techniques, and the ability to oversee and mentor a team of junior designers. The Electrical Designer will work closely with electrical engineers, project managers, and other stakeholders to deliver high-quality electrical designs that meet project objectives, comply with industry standards, and ensure the safety and efficiency of systems. Duties/ Responsibilities: Lead the design, development, and modification of electrical systems, including power distribution, lighting, low voltage systems, fire alarm, and control systems. Create and review detailed electrical schematics, layouts, one-line diagrams, and wiring diagrams, using advanced CAD software (e.g., AutoCAD, Revit). Perform in-depth electrical calculations and analysis to ensure proper sizing of electrical systems, including load calculations, voltage drops, and short circuit studies. Ensure all designs meet relevant building codes, national and international electrical standards (NEC, IEC, etc.), and safety regulations. Lead project coordination and collaborate with electrical engineers, architects, contractors, and clients to align designs with project specifications and timelines. Review and approve electrical design documents and drawings for accuracy and completeness. Mentor and guide junior designers and electrical design teams, providing technical expertise, feedback, and training. Conduct site visits to assess existing conditions, monitor project progress, and assist with commissioning and troubleshooting during installation and construction phases. Oversee the preparation of project documentation, technical reports, and submittals for clients and regulatory bodies. Provide leadership in project meetings, presenting technical information to clients, stakeholders, and project teams. Perform other duties as assigned. Qualifications: Bachelor's degree in Electrical Engineering 4-6 years of experience in electrical design, with a strong background in both technical design and project management. Engineer-in-Training (EIT) certification is required. Professional Engineer (PE) license is in the process of being obtained. Proficiency in advanced CAD software (AutoCAD, Revit, etc.), as well as electrical design tools such as SKM Power Tools, ETAP, or similar. Advanced knowledge of electrical codes (NEC, IEC, etc.), industry standards, and building codes. Strong technical understanding of power systems, lighting design, electrical control systems, and fire alarm systems. Extensive experience in performing electrical load calculations, fault current analysis, voltage drop calculations, and other system analysis tasks. Proven ability to lead projects, manage multiple deadlines, and mentor junior team members. Strong communication skills, with the ability to interact with clients, vendors, and internal teams. What we offer Competitive salary and benefits package. Opportunities for professional development and career growth. A dynamic and supportive work environment. Health insurance, Dental, Vision and Retirement Plan.

This role is with RippleMatch's partner companies. RippleMatch partners with hundreds of companies looking to hire top talent. About RippleMatch RippleMatch is your AI-powered job matchmaker. Our platform brings opportunities directly to you by matching you with top employers and jobs you are qualified for. Tell us about your strengths and goals - we'll get you interviews! Leading employers leverage RippleMatch to build high-performing teams and Gen Z job seekers across the country trust RippleMatch to launch and grow their careers. Requirements for the role: Currently pursuing a Bachelor's or Master's degree in Electrical Engineering or a related field. Basic knowledge of electrical circuit design, signal processing, and system integration. Introductory understanding of microcontroller programming and embedded systems. Awareness of industry standards and electrical safety regulations. Strong problem-solving skills and the ability to troubleshoot electrical issues. Good organizational and time management skills, with the capacity to handle multiple tasks. Effective communication skills, both written and verbal. Demonstrated ability to work collaboratively in a team environment. Eagerness to learn and adapt to new challenges and technologies. Participation in university projects, labs, or competitions related to electrical engineering is preferred.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. What You Will Do Raytheon's Effector Power (EP) Team is looking for intern level engineers who have power electronics knowledge to help design robust power systems. The Effector Power Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. Each of these products generally operate in lower power and voltage ranges less than 10kW and 1000V. Design, analyze, simulate, test, and document power conversion (and related analog) circuitry. This circuitry will dominantly involve non-isolated and isolated switch mode power converters and linear converters. Main emphasis is on board-mounted power end use applications. Help to see circuit card development through its design phases, from requirements definition through initial integration testing. Guide ECAD drafters through layout and routing activities, with support from senior engineers. Function as an individual contributor. Understand the role of a small team and engage in personal technical growth. Clearly present your work product to functional and program leadership. Qualifications You Must Have Must be pursuing a Bachelor's or graduate degree in Electrical Engineering or related Science, Technology, Engineering or Mathematics (STEM) major. This position is for an intern who is enrolled in a Bachelor's (or higher) degree program and will be at minimum, entering their Junior year by the start of summer 2026. Design, analysis, test, and/or simulation experience with one or more of the following non-isolated converter topologies: buck, boost, buck-boost. Familiarity using tools such as MATLAB, MathCAD, Mathematica, or other similar tools. Coursework related to analog electronics design, including at least one of the following: FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, and comparator circuits. Qualifications We Prefer A self-starter, a quick learner, be able to function in a dynamic environment, and have good time management skills. Experience in any one of the following: Familiarity with wide bandgap devices (SiC, GaN) in power electronics designs. Simulators such as SIMPLIS or SABER, or Mentor Graphics DxDesigner, and/or Hyperlynx. Design considerations for voltages > 400V and/or power > 10kW. Three-phase power systems, power factor control, and inverter/rectifier development. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position is for an intern who is enrolled in a Bachelor's (or higher) degree program and will be at minimum, entering their Junior by the start of summer 2026. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: ************************************************ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 37,000 USD - 82,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

_When applicable, Bombardier promotes flexible and hybrid work policies._ **Why join us?** At Bombardier, we design, build and maintain the world's peak-performing aircraft for the world's most discerning people and businesses, governments and militaries. We have been successful in setting the highest standards by putting our people at the heart of it all, and defining excellence, together. Working at Bombardier means operating at the highest level. Every day, you are part of a team that delivers superior experiences and products, pushing the boundaries of what's possible in our industry and beyond. By prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms, because the best work happens when you are free to be yourself and share your unique expertise. **What are your contributions to the team?** + Prepare necessary documents to support the modification of Bombardier aircraft such as wire diagrams, functional test plans and reports, technical requirement documents, electrical load analysis and design compliance reports. + Research specification for component selection. Coordinate with suppliers to ensure specifications are met. + Assist service center personnel in investigating, troubleshooting, and resolution of build/modification and test issues + Work in a team environment **How to thrive in this role?** + You will be pursuing an Electrical of other suitable engineering degree at accredited university + You will have familiarity with AutoCad + You will be proficient with MS Office (MS Word, Excel, Power Point, Teams, Outlook). + You must be a self-starter and able to handle multiple initiatives effectively. + You must exhibit excellent written and interpersonal communication skills. + You should be an organized individual, able to work effectively with a variety of cross-functional individuals, departments and organizations with a general good attitude and disposition. **Now that you can see yourself in this role, apply and join the Bombardier Team!** Bombardier is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by Federal, National, or Local Laws. **Job** Electrical Engineer Intern **Primary Location** Learjet Inc., Tucson 3050 **Organization** Learjet Inc **Shift** Any Shift **Employee Status** Temporary **Requisition** 10548 Electrical Engineer Intern

LotusWorks is an Engineering Services provider specializing in managing Commissioning, Construction Services, Calibration, Operations & Maintenance scopes of work within global manufacturing facilities. LotusWorks operates globally across EMEA and North America partnering with the world's leading manufacturers across the Semiconductor, Pharmaceutical & Biologics, Medical Device and Data Centre sectors. Our team of Engineering and Technical professionals is immersed in cutting-edge technologies and innovations. LotusWorks is committed to a diverse and inclusive workplace, integral to our people-first approach. A very exciting opportunity to work with and learn all facilities equipment and operations! As an Engineering Intern at LotusWorks, you will have the opportunity to work closely with our experienced engineering commissioning team and gain practical knowledge in the field of engineering. This internship is a fantastic opportunity for soon-to-be graduates and recent graduates with a bachelor's degree with an engineering discipline to kickstart their careers. Responsibilities: Shadowing and working alongside our team of experienced commissioning engineers. Witnessing and participating in FAT of all utility systems and equipment required to start up and maintain a clean room fabrication plant. Collaborate with commissioning engineers and other professionals to complete assigned tasks. Assist with research, data analysis, and report writing. Participate in training and development opportunities to enhance your skills and knowledge. Any other duties or responsibilities that may be assigned to you in your role. Skills Required: Strong academic background with a solid understanding of engineering principles. Strong knowledge of PC and MS Office applications, SQL, Python Coding, Smartsheets are ideal. Excellent problem-solving skills and a willingness to learn. Effective communication skills, both written and verbal. Ability to work well in a team and independently. Attention to detail and a strong commitment to safety. No prior work experience is required; academic projects would be a plus. Education / Licenses / Certifications Current undergraduate student pursuing a bachelor's degree majoring in Electrical Engineering graduating in December 2025 is required. Recent college graduates with a bachelor's degree majoring in the above, are strongly encouraged to apply. Proof of education, licenses, and certifications will be required where applicable. #INDHP #LI-DNP LotusWorks is an equal opportunity employer and prohibits discrimination and harassment of any kind. We are committed to creating a diverse and inclusive workplace where all employees feel valued, respected, and empowered.

We are hiring awesome humans, and we hope that includes you! Are you looking for more than just a job? At Chewy, you'll find yourself on a career path with other awesome humans, like yourself. You'll be part of a culture that values everything that you do, who you are, and the goals you have set for your career. We want to give you the opportunity to grow, earn competitive pay, and be happy while you do it. Sounds simple, but we love it. Your Opportunity: Chewy is seeking a Hardware Engineer II to join our Fulfillment Center Design Engineering Team. In this role, you'll be a key contributor in the design and execution of Chewy's large-scale fulfillment and automation infrastructure. You'll apply data-driven analysis, mechanical and electrical design skills, and vendor coordination to deliver world-class fulfillment centers that power Chewy's continued growth. You will design and execute capital projects supporting new sites, retrofits, and automation upgrades across facilities up to 1 million square feet, ensuring that material-handling systems, robotics cells, and process equipment are safe, reliable, and scalable. What You'll Do: Develop detailed engineering designs for new ecommerce fulfillment centers and retrofits, including AutoCAD layouts, power/data plans, and process flow documentation for core, pharmacy, and perishables business verticals. Build Excel- and SQL-based models to analyze material flow, throughput, storage capacity, and labor requirements. Create and tabulate Requests for Proposal (RFPs) and vendor bid comparisons; recommend solutions based on technical merit and cost. Partner with vendors and internal teams to scope, design, and validate new fulfillment technologies such as conveyance, sortation, and robotic work cells. Support Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for conveyance, automated packaging equipment, and robotics. Ensure all designs meet Chewy's safety, compliance, and reliability standards, incorporating maintainability and redundancy. Participate in design reviews, cross-functional coordination, and installation planning alongside Operations, Maintenance, and Controls Engineering teams. Author Capital Approval Requests (CARs) and project documentation for initiatives typically in the $500K-$2M+ range. Document lessons learned and proposed process improvements to standardize designs and increase project velocity. What You'll Need: Bachelor's degree in Mechanical, Industrial, Electrical, or related Engineering field (or equivalent work experience). 3-6 years of experience in fulfillment, manufacturing, or automation system design. Proficiency in AutoCAD, Excel modeling, and basic SQL/database tools. Familiarity with material-handling and automation systems (conveyors, robotics, ASRS, or sortation). Strong analytical, problem-solving, and communication skills. Ability to execute multiple high-priority projects in a fast-paced environment. Willingness to travel 25%+ to support site visits, vendor tests, and installations. Bonus: Master's degree in Engineering or related field. Experience with WMS/WCS integration, Ignition, or ladder logic-based controls systems. Experience developing automated e-commerce fulfillment infrastructure. Demonstrated ability to analyze and summarize large operational data sets. What You'll Get: A place where you can be your authentic self and grow your career. Our pet parents and partners are from everywhere--different places and different walks of life. It is what makes them unique. Likewise, Chewtopians are encouraged to bring their perspectives to deliver on our mission! Work in a culture that cares, with managers who value you and your career journey. Be empowered to think big, thrive on delivering results, and to become your best. Development of meaningful connections with a diverse group of Chewtopians through Team Member Resource Groups and celebrate inclusivity with various company events, programs, and activities. Comprehensive medical, dental, vision benefits, in addition to wellness programs and resources, enabling you to be your best self in and outside of work. Chewy is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, national origin, gender, citizenship, marital status, religion, age, disability, gender identity, results of genetic testing, veteran status, as well as any other legally-protected characteristic. If you have a disability under the Americans with Disabilities Act or similar law, and you need an accommodation during the application process or to perform these job requirements, or if you need a religious accommodation, please contact **************. To access Chewy's Customer Privacy Policy, please click here. To access Chewy's California CPRA Job Applicant Privacy Policy, please click here.

Secondary Locations Job Code **18700** \# of openings **1** Apply Now (**************************************************** Requisition?org=POWERENGINEERS&cws=44&rid=18700) **This Opportunity -** **Electrical Engineering (SAS) Intern - Summer 2026** Our POWER team is seeking a **Full Time Electrical Engineering (SAS) Intern - Summer 2026** to work out of our **Phoenix, AZ** office. This temporary position is seeking individuals currently enrolled in an Undergraduate or Graduate degree program. WSP USA hosts hundreds of internships across the United States to gain hands-on, meaningful work experience to enhance their education and professional aptitude. Our interns gain exposure to real projects while working side by side with senior staff. Through our Developing Professionals Network, interns gain mentorship, networking opportunities and lifelong career connections. This internship is anticipated to take place during the Summer 2026 semester. The program is anticipated to take place from May 18, 2026 through August 7, 2026. The individual start date is flexible. **Your Impact** + Support a variety of engineering tasks with the goal to develop technical, social, and ethical skills. + Learn basic principles of Electrical Engineering. + Assist with electrical studies and troubleshooting SCADA systems for utility and industrial/commercial clients + Work on power systems including generation facilities, substations, transmission, and distribution systems + Participate in protective relaying tasks such as short circuit analysis, relay settings, and NERC compliance using specialized software + Support power system planning studies, including power flow, stability analysis, and automation of simulations + Contribute to infrastructure design studies like substation grounding, insulation coordination, and power quality analysis + Design and configure network and communication paths for SCADA systems, and troubleshoot communication systems on site + Develop and implement logic and control schemes for power system equipment, including on-site testing and commissioning + Prepare data acquisition lists, assign routing info, develop HMI screens, and commission data transfer schemes using various software + Complete training on assigned tasks. + Exercise responsible and ethical decision-making regarding company funds, resources and conduct, and adhere to WSP's Code of Conduct and related policies and procedures. + Perform additional responsibilities as required by business needs. + Please note that there is no relocation or housing assistance associated with this internship. **Who You Are** **Required Qualifications** + Actively enrolled in an accredited Electrical Engineering, or related, Undergraduate program with an anticipated graduation date of August 2026 or later + Must be 18 or older. + Demonstrated interest in Electrical Engineering, consulting engineering, electric utility industry, or related field, and have a strong desire to advance skills related to WSP's work and projects. + Competent interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to an engineering and non-engineering audience. + Capable of taking direction from leadership, mentors, and managers to executive projects. + Basic proficiency with technical writing, office automation, software, spreadsheets, technology, and tools. + Proven track record of upholding workplace safety and ability to abide by WSP's health, safety and drug/alcohol and harassment policies. + Candidates must be willing to travel on occasion and work successfully in a customer-focused, project-oriented environment + Authorization to work in the United States at the start of the internship. **Preferred Qualifications** + Actively enrolled in an accredited Electrical Engineering, or related, Masters or program, with an anticipated graduation date of August 2026 or later. + Successful completion of junior-level courses in power system analysis and/or power system protection + Prior internship and leadership involvement on campus. + Preference is given to applicants with any of the following: within 1 year of graduation, power system courses covering topics such as three-phase power, load flow and reactive compensation, protective relaying, symmetrical components, transmission line theory, power system transients, dynamic stability, and power system electromagnetics + Students who have passed or are scheduled to take the FE/EIT exam will be strongly considered for this position POWER Engineers, Member of WSP, is a global consulting environmental and engineering firm and one of the top design firms in the energy sector. Together, POWER and WSP's 73,900 experts create positive, long-lasting impacts for our communities and our clients in the power and energy, transportation and infrastructure, environmental, and property and buildings sectors. As part of our team, you'll discover a world of opportunities to connect with innovative thinkers, forge your path, and have fun tackling the world's most challenging projects. At POWER Engineers, Member of WSP, you can have a rewarding career on every level. Our philosophy is simple: Do Good. Have Fun. Build Success. We are a fun engineering firm. That might seem contradictory to some, but it works for us! POWER is an Equal Opportunity Employer, including women, minorities, veterans and individuals with disabilities. \#LI-GA1

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? At GHD we are looking for a new Electrical Engineering Intern to join the Engineering Design team at our Phoenix, AZ office. In this role you will research, design, develop, test, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use. Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in office, three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: Contract Management: Carry out a range of contract management tasks. Engineering Inspections: Provide technical support to inspections of the quality of engineering works and/or the integrity of existing installations or structures, and the remedial works needed in accordance with organizational standards and regulatory requirements. Improvement/Innovation: Implement improvements and provide feedback on them. Use change management systems and protocols to provide routine support services. Product and Solution Development: Carry out a range of product development and engineering activities. Use established systems to analyze customer needs and define and deliver products. Project Management: Work within an established project management plan to achieve specific goals. Engineering Solutions Design: Implement feasibility testing of proposed engineering solutions, under supervision, to provide feedback and contribute to validation of the design. Engineering Standards Specification: Carry out a range of activities under the guidance of more senior colleagues to support the drafting of engineering standards and specifications and the evaluation of the effectiveness of those standards. Knowledge Management System: Help others get the most out of knowledge management systems by offering support and advice. Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. What you will bring to the Team Education Currently enrolled in an electrical engineering or equivalent Bachelor's or Master's degree program. Experience General Experience: No experience required #LI-AL1 Salary Range: $20.00 - $26.00 based on experience and location. As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Are you looking for a new challenge with a Large world class secure company, with a small company atmosphere and agility? Do you want to work on a wide variety of projects? Do you have the excellent work ethics to match the company's environment? Our client is looking for a strong PCB Design/Layout Engineer with 3 or more years of experience. Any experience with designing for CE noise immunity and hazardous area approvals (Explosion Proof and Intrinsically Safe). Familiarity of communication protocols (e.g. CANbus, Modbus, TCP/IP) is preferred. Please contact me for more information.

Arizona Public Service generates reliable, affordable and clean energy for 2.7 million Arizonans. Our service territory stretches across the state, from the border town of Douglas to the vistas of the Grand Canyon, from the solar fields of Gila Bend to the ponderosa pines of Payson. As the state's largest and longest-serving energy provider, our more than 6,000 dedicated employees power our vision of creating a sustainable energy future for Arizona. Since our founding in 1886, APS has demonstrated a strong commitment to our customers in one of the country's fastest growing states, earning a reputation for customer satisfaction, shareholder value, operational excellence and business integrity. Our present and future success depends on the creative and dedicated people of our company who demonstrate the principles outlined in the APS Promise: Design for Tomorrow, Empower Each Other and Succeed Together. Summary The Substation Electrical Engineering III/Senior - provides technical engineering, design, economic and analytical support to participate in the development of Transmission and Distribution Substations. What your day would be like: You are responsible for: Performs engineering tasks requiring skills and experience gained through Substation Design including Civil, Electrical, Physical Equipment Layout, Protection and Control. Responsibility for technical decisions and interpretations. Provides technical guidance and leadership to others as needed. May be subject to shift work. The kinds of people we want to talk to have done many of the following: Prepared engineering plans, designs, analysis, specifications, cost estimates, evaluations, studies, technical reviews, investigations and verifications. Complied with design, regulatory, operating and maintenance requirements. Ensured engineering analyses, design, project control, schedule commitments, or oversight work is technically sound, cost effective, and in compliance with established standards, codes, and regulations. Checked and reviews analysis, evaluations, and investigations of others. Minimum Requirements Engineer III: A four-year Bachelors degree in an engineering discipline or related applied science discipline (see approved list) from an ABET accredited institution, an International Engineering Alliance (IEA) recognized institution or an ABET Mutual Recognition Agreement (MRA) plus five (5) years working experience in Engineering-related positions. Engineer Senior: A four-year Bachelors degree in an engineering discipline or related applied science discipline (see approved list) from an ABET accredited institution, an International Engineering Alliance (IEA) recognized institution or an ABET Mutual Recognition Agreement (MRA) plus eight (8) years working experience in Engineering-related positions. Approved Engineer degrees: Materials Science/Metallurgy, Physics, Chemistry, Nuclear, Electrical, Mechanical, Civil, Electronics, Computer Science, Environmental, Chemical, Structural. (A four-year bachelor of Engineering Technology degree is not considered an automatic equivalent for a B.S. degree in Engineering. A review of the degree program curriculum must be completed by Engineering department management.) Major Accountabilities 1) Prepares engineering plans, designs, analysis, specifications, cost estimates, evaluations, studies, technical reviews, investigations and verifications. Complies with design, regulatory, operating and maintenance requirements. Ensures engineering analyses, design, project control, schedule commitments, or oversight work is technically sound, cost effective, and in compliance with established standards, codes, and regulations. Checks and reviews analysis, evaluations, and investigations of others. 2) Interfaces with customers and other departments to ensure project objectives are understood and that work scope meets customer requirements, budget and schedule. Contacts customers and various levels of management to obtain or present technical data. Presents the results of designs, studies projects (in terms of new techniques) or approaches to subordinates, colleagues, management and customers. 3) Enhances department performance and productivity and/or unit performance by formulating, coordinating, performing analysis and making recommendations for improvements. Provides technical assistance and guidance to department personnel to enhance department performance and productivity. 4) May provide oversight of engineering technical programs by managing the program requirements, working with cross organizational partners, reviewing and internalizing operating experience and coordinating corrective actions to ensure engineering program elements continue to remain healthy. 5) May assume responsibility for small- to medium-scale projects which include planning, designing, scheduling and coordinating all facets of the project. Identifies potential schedule or quality problems and initiates corrective action. Takes initiative to eliminate barriers and uses resources to ensure desired results. May interface with outside agencies and regulatory authorities. 6) Provides technical guidance and leadership to less experienced engineers. 7) May participate in developing long-range strategies for significant site problems. 8) Provides input to projects and recommends modifications to increase operating efficiency and/or reviews design and documentation of projects to ensure compliance with design specifications, schedules and any regulatory requirements. 9) Remains cognizant of current technology and engineering developments as well as industry and competitive developments. Export Compliance / EEO Statement This position may require access to and/or use of information subject to control under the Department of Energy's Part 810 Regulations (10 CFR Part 810), the Export Administration Regulations (EAR) (15 CFR Parts 730 through 774), or the International Traffic in Arms Regulations (ITAR) (22 CFR Chapter I, Subchapter M Part 120) (collectively, 'U.S. Export Control Laws'). Therefore, some positions may require applicants to be a U.S. person, which is defined as a U.S. Citizen, a U.S. Lawful Permanent Resident (i.e. 'Green Card Holder'), a Political Asylee, or a Refugee under the U.S. Export Control Laws. All applicants will be required to confirm their U.S. person or non-US person status. All information collected in this regard will only be used to ensure compliance with U.S. Export Control Laws, and will be used in full compliance with all applicable laws prohibiting discrimination on the basis of national origin and other factors. For positions at Palo Verde Nuclear Generating Stations (PVNGS) all openings will require applicants to be a U.S. person. Pinnacle West Capital Corporation and its subsidiaries and affiliates ('Pinnacle West') maintain a continuing policy of nondiscrimination in employment. It is our policy to provide equal opportunity in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations. This policy of nondiscrimination shall include, but not be limited to, recruiting, hiring, promoting, compensating, reassigning, demoting, transferring, laying off, recalling, terminating employment, and training for all positions without regard to race, color, religion, disability, age, national origin, gender, gender identity, sexual orientation, marital status, protected veteran status, or any other classification or characteristic protected by law. For more information on applicable equal employment regulations, please refer to EEO is the Law poster. Federal law requires all employers to verify the identity and employment eligibility of every person hired to work in the United States, refer to E-Verify poster. View the employee rights and responsibilities under the Family and Medical Leave Act (FMLA). In compliance with the Drug Free Workplace Act of 1988, the Company is committed to a work environment that is free from the effects of alcohol and controlled substances, and free from the abuse or inappropriate use of prescribed and over-the-counter medications. The Company requires employees to be subject to drug and alcohol testing that is job-related and consistent with business necessity, regulatory requirements and applicable laws. Hybrid: Employees in hybrid roles work both in their home offices (virtually) and alongside their colleagues (in person). In order for employees to build strong relationships and to promote meaningful in-person interactions, hybrid employees are expected to work about 40% of their time in-person at an APS or other (non-home office) location. *Employees are expected to reside in Arizona (or New Mexico for Four Corners-based employees). *Working from a home office requires adequate technology and an appropriate ergonomic set up. *Role types are subject to change based on business need.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. This position is for an Electrical Engineer II with at least 2 years of professional experience. If you enjoy working in hands-on multidiscipline teams, the Test Equipment Directorate is interested in hearing from you! Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America's 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature's best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson's fantastic weather lets residents enjoy the outdoors year-round. The Test Equipment Directorate is a multi-discipline organization responsible for developing test solutions for all Raytheon products. Our engineers are responsible for all elements of the development lifecycle for test. We are hands-on, designing with the latest technology and tools, and integrate state of the art test solutions with the most advanced engineering systems in the world. Typical work involves designing interface assemblies, selection and integration with test instruments and environments, to develop a test system for all Raytheon products. These core activities may be performed for both lab engineering and factory production test systems. The candidate will contribute to the completion of all stages of test product development and will be responsible for helping to maintain the technical, cost and schedule aspects of their assigned projects. They will be expected to act, either as a part of their team or independently, to uncover and resolve issues associated with the development and implementation of test products. This position is 100% onsite in Tucson, Arizona What You Will Do: * Design, development, and integrate Raytheon test products within Test Equipment in multidiscipline engineering teams * Develop both engineering and production test systems, test interface adapters, cabling, technical drawing creation, schematic creation, circuit design and analysis * Contribute to the completion of all stages of test product development, and responsible for performing technical, cost and schedule management of assigned projects * Act, either as a part of the team or independently, to uncover and resolve issues associated with the development and implementation of test products Qualifications You Must Have: * Typically requires Bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of two (2) years of prior relevant experience OR an Advanced degree * The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. * Experience with electrical engineering to include troubleshooting, analysis, and test * Experience with commonly used electrical engineering design and analysis tools including but not limited to: Altium, DX Designer, Mentor Capital, Creo Schematic * Experience with commonly used test equipment including but not limited to: Oscilloscopes, DMMs, Network Analyzers, Power Meters * Experience using schematic capture tools and interpreting schematics Qualifications We Prefer: * Master of Science degree in Science, Technology, Engineering or Mathematics (STEM). ABET is the preferred, although not required, accreditation standard * Ability to provide technical leadership in a multidiscipline team environment * Experience performing analog, digital, and/or RF design * Experience designing, testing, and integrating digital, mixed signal, and electrical system interconnect * Experience utilizing integrated development environments and debugging tools to troubleshoot software * Self-starter and able to manage workload to meet assigned deadlines * Experience working in a team environment * Proficient technical writing and formal presentation experience * Ability to lead single- or multi-discipline teams of engineers * Project management experience * Bid and proposal experience * Knowledge of computer architecture and computer hardware optimization techniques * Experience with developing and implementing programming languages * Utilize existing designs as a starting point to interface with new units under test (UUTs) and UUT configurations when necessary * Experience with troubleshooting and root-cause analysis * Knowledge of RTX projects, programs or systems to make enhancements and leverage in daily work. What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Clearance Information: Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: ************************************************ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

JobID: 8997 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities, and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Assists the Project Engineer with being the technical source of information for the project. Responds to questions about drawings, specifications, shop drawings, and change orders and have responsibility for assisting in writing change orders, RFl's, meeting minutes, and reviewing Submittals. Maintains an effective and professional working relationship with owners, architects, engineers, subcontractors, and suppliers. This position includes three 'steps' (I, II and Senior), which provide for a progression of skill and experience. Step I is the entry level for individuals with a minimum of experience in this position. Step II is used for employees with 2 years of experience in this position, or with experience on larger and more complex projects. The 'Senior' step is used for employees with more than 4 years of experience and/or experience on significantly larger or more complex projects. Key Responsibilities 1. Assists Project Engineer in developing and maintaining as-built drawings and other work tasks and assists with or reviews and processes submittals, change orders, RFl's, and budget forecasting. Ensures the timely and appropriate generation, collection, distribution, storage, retrieval and ultimate disposition of meeting agendas, RFl's and daily reports. 2. Demonstrates an understanding of the project management plan (PMP) and is involved in support and execution of the plan. Demonstrates a thorough understanding of the change management process and performs project scope activities and supports the project team to ensure the work needed to complete the project successfully. 3. Ensures the administration of the project quality management plan and demonstrates and reinforces a culture of safety throughout the project. 4. May assist in the calculation of daily production rates and unit costs for self-performed work. Participates in risk management including identification, analysis, response planning and monitoring and control on a project and demonstrates competency in understanding the environmental control processes for the project and takes corrective actions when necessary. 5. May be responsible for overseeing/managing the BIM (Building Information Modeling) Coordination between Subcontractors and Designers. 6. May be responsible for the documentation and submittal for the LEED (Leadership in Energy and Environmental Design) Certification of a building and for creating and updating Digital Record Drawings (ORD). 7. May provide lines, grades and layout as required for the project while maintaining an organized log book. 8. May provide the following weekly quantities: maintains accurate quantity logs and reports quantities in compliance with the cost control manual. Completed logs are to be filed with the project files. Perform elements of the processes involved in budgeting and controlling costs so that the project can be completed within the approved budget. Demonstrates business acumen within area of responsibility. (Not all Field Engineers track quantities) 9. Provides support to superintendents required for the execution of the work and assists in the resolution of field problems as necessary. Minimum Job Requirements 1. Ability to assume responsibility, interface and communicate with others is essential. 2. Entry-level position that normally requires a four-year construction-related degree or equivalent technical/field experience. 3. Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, etc.) proficiency. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KA1

AmLaw 100 Firm. Was previously named "Law Firm of the Year" in Patent Law. Active at the PTAB and ITC. Collaborative work culture, with a realistic chance to make Partner. Recognized by BTI Consulting for Strong Client Relationships. REQUIREMENTS The ideal candidate will possess relevant patent preparation and prosecution experience and an undergraduate or advanced degree in electrical engineering, computer engineering, software engineering, computer science, or physics. The firm is especially interested in candidates who can draft, file, and prosecute patent applications related to graphics processing units, tensor processing units, accelerators, neural engines, and robotics circuitry and actuators. Interested candidates must possess a high level of academic achievement, solid law firm experience, and superb writing and communication skills. JD, active bar admission in the jurisdiction in which the candidate intends to practice, and admission to the USPTO are required. SUMMARY Vanguard Intellectual Partners (Vanguard-IP) specializes in the placement of IP/Patent professionals nationwide. Our sole focus on intellectual property enables us to more deeply understand our clients' technical needs, and our candidates' individual talents and career interests. Our broad network of long-term client relationships gives us a competitive edge. Our recruiters all have 10+ years of IP recruiting experience, and an exceptional record of success. We have superior knowledge of the IP job market, and offer trusted career advice for our candidates. We also have the resources and high-level contacts to get your resume noticed by the people who matter. We look forward to speaking with you, and learning more about what you are seeking in your next opportunity. CONFIDENTIALITY At Vanguard-IP, we respect the confidentiality of every candidate who contacts us. Furthermore, we will always obtain expressed authorization before submitting your resume to any of our clients. **Should you have an interest in exploring opportunities in another location, we have hundreds of openings in other markets. Please apply now and our team would be happy to review your information for this or other openings in your location of interest.

Please note: This is an on-site position that requires the selected candidate to work from our Phoenix, AZ, office. This is not a remote role; we follow a 9/80 onsite schedule, where every other Friday is off. Acron Aviation is a global leader in commercial aviation solutions - designed, engineered, and delivered by a team of passionate innovators redefining what's possible in flight. From advanced avionics and flight data intelligence to world-class simulation and pilot training, we support aircraft operators and OEMs with the technology and expertise to fly safer, smarter, and more efficiently. Now, with a bold new identity, we're building on a legacy of aviation excellence - unleashing fresh energy, modern thinking, and a customer-first mindset to meet the demands of today's rapidly evolving aerospace industry. Welcome to Acron Aviation - where the future takes flight! Job Description: As a Senior Associate Electrical Engineer within our Surveillance product line, you will focus on developing TCAS and transponder avionics for commercial aircraft. This responsibility spans concept generation, design, qualification, and lifecycle management. You will interact with multi-disciplinary engineering teams, as well as operations and manufacturing, to create and deliver products to our customers. You will support senior engineers in developing detailed analysis and documentation, running hands-on tests and simulations, and providing design inputs. Essential Functions: Design and support digital, analog, and power circuitry, with supplemental RF principles, in the avionics realm. Design, analyze, and test circuits with microprocessors, memory, Ethernet, SPI, I2C, high-speed busses including PCIE, and various avionics interfaces. Support production and resolve factory issues affecting assigned products. Conduct electrical schematic generation and review. Support for and review of CAD layout (preferred skills with Altium). Develop change impact analysis documents and support product management (obsolescence, design for cost, design for manufacturability) Utilize electrical analysis tools for power distribution, stress analysis, and other relevant simulations. Effectively communicate across multiple technical teams. Communicate directly with customers, in person or virtually, to understand their problems and formulate actionable solutions. Other duties as assigned. Travel up to 10%. Qualifications: Bachelor's Degree in Electrical Engineering or Computer Engineering and minimum 2 years of prior relevant experience. Graduate Degree and a minimum of 1 year of previous related experience. Hands-on experience with electrical hardware design, integration, production, and/or test. Ability to interpret engineering drawings and schematics for the purpose of isolating issues or implementing functional improvements. Preferred Additional Skills: High-speed Digital Design: Experience with DDR4/DDR5, PCIe, Ethernet, and other high-speed interfaces. Signal Integrity / Power Integrity (SI/PI): Simulation, analysis, and mitigation of noise, crosstalk, reflections, and decoupling strategies. Reliability & Safety: Component derating, transient protection, and worst-case analysis DC-DC Conversion: Design of buck, boost, and flyback converters for high-current digital loads. AC-DC Conversion: Design and qualification of PFC (power factor correction), rectifiers, and isolated power stages. Python or C++ working knowledge. Experience with and an understanding of aerospace systems, especially in the development of integrated hardware/software products Awareness of FPGA/firmware development requirements as they impact electrical design Excellent people skills, with experience working in multidisciplinary/cross-functional teams Excellent communication skills (written, verbal, & presentation) Awareness of aerospace specifications such as DO-160, DO-178, and DO-254 Experience with Design to Cost and Design for Manufacturability Experience in effectively supporting the production and test of products in a different geographic location Demonstrated ability to handle multiple programs and responsibilities simultaneously Ability to operate and identify appropriate path forward with some oversight Pilot License or Part 107 certificate

The future is what you make it. When you join Honeywell, you become a member of our global team of thinkers, innovators, dreamers and doers who make the things that make the future.That means changing the way we fly, fueling jets in an eco-friendly way, keeping buildings smart and safe and even making it possible to breathe on Mars. Working at Honeywell isn't just about developing cool things. At Honeywell, our approach is simple. We hire talented people, nurture their growth, give them opportunities to make a difference, and promote from within. Are you ready to help us make the future? As part of our Communication, Navigation and Surveillance (CN&S) group, you will contribute to the development of Honeywell's Next-Generation of Aircraft Weather Radar technologies by designing, testing and/or validating products/processes from prototype to market, with a heavy focus on quality, roll-throughput yield, aftermarket, and factory support. In this role, you will have the opportunity to make an impact on the development and delivery of cutting-edge aircraft weather Radar Technologies, contributing to the safety and efficiency of air travel. You will interact with internal and external customers in order to facilitate the development and completion of Radar products that align with customer specifications and satisfy our mission to deliver top-quality products to market. * Use your knowledge of the hardware engineering disciplines, processes and tools to contribute to the advancement of Honeywell's world-class Radar technologies and products * Plan and execute project subtasks (Designing, Testing, etc) * Draft and release drawing changes in Team Center * Troubleshoot and diagnose product performance issues. * Identify opportunities and propose technical improvements * Assist in product and process certification for customer acceptance * Support obsolescence team in identifying and qualifying alternate parts. * Guide engineers, technicians and associates to ensure project and product compliance to specifications and quality standards * Suggest enhancements to advance projects and products. * Establish and follow methodologies that push forward new concepts or refine existing concepts * Consult with vendors and suppliers to ensure product and project compliance At Honeywell, our people leaders play a critical role in developing and supporting our employees to help them perform at their best and drive change across the company. Help to build a strong, diverse team by recruiting talent, identifying, and developing successors, driving retention and engagement, and fostering an inclusive culture. YOU MUST HAVE * Bachelor's degree from an accredited institution in a technical discipline such as science, technology, engineering, mathematics * Combination of academic, project, internship, co-op and/or professional experience in Hardware Engineering WE VALUE * Degree in Electrical Engineering or related field * Understanding of a variety of hardware engineering principles, methodologies and specifications * Capability to complete demanding assignments by applying advanced hardware engineering methods and tools * Ability to influence cross-functional teams to deliver optimal solutions * Ability to consistently make timely decisions and balance program demands * Capability to follow guidelines and ensure efficiency on given project tasks THE BUSINESS UNIT The CN&S (Communications, Navigation & Surveillance) Organization within Honeywell is dedicated to advancing aviation technology and ensuring the safety and efficiency of air travel. Some of the product areas include Aircraft Control Systems, FMS Datalink, EGPWS (Ground Proximity Warning Systems), Runway & Landing Surveillance, Weather Radar, Traffic & Surveillance, Radio Navigation Systems, Global Navigation Systems, Multi-Constellation Satellite Systems), Next Gen 5G Radar Altimeter, and RF technologies. Join our team and be a part of shaping the future of aviation technology. BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: Benefits at Honeywell The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: Dec 8th, 2025. Due to compliance with U.S. export control laws and regulations, candidate must a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status or have the ability to obtain an export authorization.

The future is what you make it. When you join Honeywell, you become a member of our global team of thinkers, innovators, dreamers and doers who make the things that make the future.That means changing the way we fly, fueling jets in an eco-friendly way, keeping buildings smart and safe and even making it possible to breathe on Mars. Working at Honeywell isn't just about developing cool things. At Honeywell, our approach is simple. We hire talented people, nurture their growth, give them opportunities to make a difference, and promote from within. Are you ready to help us make the future? As part of our Communication, Navigation and Surveillance (CN&S) group, you will contribute to the development of Honeywell's Next-Generation of Aircraft Weather Radar technologies by designing, testing and/or validating products/processes from prototype to market, with a heavy focus on quality, roll-throughput yield, aftermarket, and factory support. In this role, you will have the opportunity to make an impact on the development and delivery of cutting-edge aircraft weather Radar Technologies, contributing to the safety and efficiency of air travel. You will interact with internal and external customers in order to facilitate the development and completion of Radar products that align with customer specifications and satisfy our mission to deliver top-quality products to market. YOU MUST HAVE Bachelor's degree from an accredited institution in a technical discipline such as science, technology, engineering, mathematics Combination of academic, project, internship, co-op and/or professional experience in Hardware Engineering WE VALUE Degree in Electrical Engineering or related field Understanding of a variety of hardware engineering principles, methodologies and specifications Capability to complete demanding assignments by applying advanced hardware engineering methods and tools Ability to influence cross-functional teams to deliver optimal solutions Ability to consistently make timely decisions and balance program demands Capability to follow guidelines and ensure efficiency on given project tasks THE BUSINESS UNIT The CN&S (Communications, Navigation & Surveillance) Organization within Honeywell is dedicated to advancing aviation technology and ensuring the safety and efficiency of air travel. Some of the product areas include Aircraft Control Systems, FMS Datalink, EGPWS (Ground Proximity Warning Systems), Runway & Landing Surveillance, Weather Radar, Traffic & Surveillance, Radio Navigation Systems, Global Navigation Systems, Multi-Constellation Satellite Systems), Next Gen 5G Radar Altimeter, and RF technologies. Join our team and be a part of shaping the future of aviation technology. BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: Benefits at Honeywell The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: Dec 8th, 2025. Due to compliance with U.S. export control laws and regulations, candidate must a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status or have the ability to obtain an export authorization. Use your knowledge of the hardware engineering disciplines, processes and tools to contribute to the advancement of Honeywell's world-class Radar technologies and products Plan and execute project subtasks (Designing, Testing, etc) Draft and release drawing changes in Team Center Troubleshoot and diagnose product performance issues. Identify opportunities and propose technical improvements Assist in product and process certification for customer acceptance Support obsolescence team in identifying and qualifying alternate parts. Guide engineers, technicians and associates to ensure project and product compliance to specifications and quality standards Suggest enhancements to advance projects and products. Establish and follow methodologies that push forward new concepts or refine existing concepts Consult with vendors and suppliers to ensure product and project compliance At Honeywell, our people leaders play a critical role in developing and supporting our employees to help them perform at their best and drive change across the company. Help to build a strong, diverse team by recruiting talent, identifying, and developing successors, driving retention and engagement, and fostering an inclusive culture.

United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: We are searching for an Electrical Engineer to join our team. The successful candidate will be responsible for designing, implementing, and maintaining electrical systems in a cleanroom environment, ensuring compliance with semiconductor production regulations and standards. Experience in electrical construction is highly desired. ***Position is onsite in North Phoenix Arizona. *** Essential Duties and Responsibilities include the following. Other duties may be assigned. · Perform requirements classification of clients, communicating project requirements and design review with internal & external design team for Electrical system. · Perform the required scope of work and clarify specification with stakeholders. · Assist procurement team on electrical systems equipment & materials and assist in contractors' awards. · Understand isometrics, P&ID and CAD drawings specifically for electrical systems. · Review, approve and oversee the installation of electrical systems. · Inspect work in progress to ensure that workmanship conforms with specifications and assure adherence to construction schedules. · Review progress reports, materials used and costs, contract payment application, and adjust work schedules as indicated by the reports. · Review & reply RFI (Request for information) and change orders. · Provide daily, weekly, and monthly reports for internal use and client communication. · Identify and solve problems. · Scheduling and schedule execution. · Understand drawing and review specifications and estimation. · Other responsibilities as assigned. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: · Prefer a bachelor's degree in electrical engineering, Construction Management, or a related field. · 1-3+ years of experience Electrical system planning. · Construction experience required. Semiconductor construction, a plus. Skills and Competencies: · Strong understanding of high and low voltage power, lighting sockets, fire protection power, broadcasting, weak current, refuse direction indicator, grounding lightening protection system. · Proficiency in Microsoft Office Suite products (Word, PowerPoint, Excel, Outlook, Teams). · Ability to use engineering software, such as AutoCAD, Primavera, or others. · Excellent organizational and time management skills. · High level of attention to detail, and highly organized. · Ability to act with integrity, professionalism, and confidentiality. · Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers and employees. · Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors. · Must be able to work under pressure and meet deadlines while maintaining a professional attitude. · Ability to work in a construction site environment (trailer office). Language Proficiency: · Effective English verbal and written communication skills required. · Ability to communicate in Mandarin/Taiwanese is a plus. · Ability to effectively present information and respond to questions from groups of managers, customers, and employees. · Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Nice to have: · Start-up experience. · Verbal communication skills in Mandarin. · Professional Engineer license. Additional Requirements: · Must have and maintain a valid Arizona driver's license. May be required to travel to other sites within Arizona to perform certain work functions. May require international travel. Physical Demands & Work Environment This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.