Electrical engineer internship jobs in Gilroy, CA

Domain: Embedded Hardware, PCB Design, FPGA, High-Speed Systems, EMI/EMC Experience: 10+ years San Jose, CA Based - Lead end-to-end hardware development for FPGA/SoC-based systems, including architecture, schematic design, PCB review, board bring-up, debugging, compliance testing, and cross-functional collaboration. Key Responsibilities: Hardware Design: Architecture, schematic capture, PCB review, documentation System Integration: High-speed board bring-up, signal/power integrity troubleshooting Testing & Compliance: DVT/PVT, EMI/EMC design, certification coordination Vendor Interface: PCB fabrication, assembly, procurement Sustenance: RMA debugging, redesign for compliance Collaboration: Work with firmware, mechanical, and test teams Technical Skills: Tools: Allegro, Altium, Interfaces: USB, BLE, SPI, I2C, Ethernet, CAN, PCIe Lab Expertise: Oscilloscopes, Logic Analyzers, Signal Generators Qualifications: Bachelor's in Electronics/Communication (or related), strong debugging and documentation skills

Domain: Embedded Hardware, PCB Design, FPGA, High-Speed Systems, EMI/EMC Experience: 10+ years San Jose, CA Based - Lead end-to-end hardware development for FPGA/SoC-based systems, including architecture, schematic design, PCB review, board bring-up, debugging, compliance testing, and cross-functional collaboration. Key Responsibilities: Hardware Design: Architecture, schematic capture, PCB review, documentation System Integration: High-speed board bring-up, signal/power integrity troubleshooting Testing & Compliance: DVT/PVT, EMI/EMC design, certification coordination Vendor Interface: PCB fabrication, assembly, procurement Sustenance: RMA debugging, redesign for compliance Collaboration: Work with firmware, mechanical, and test teams Technical Skills: Tools: Allegro, Altium, Interfaces: USB, BLE, SPI, I2C, Ethernet, CAN, PCIe Lab Expertise: Oscilloscopes, Logic Analyzers, Signal Generators Qualifications: Bachelor's in Electronics/Communication (or related), strong debugging and documentation skills

Job Title: Electrical Design Engineer 4 Work Schedule: On-site Rate: $71, Based on experience. Responsibilities: Designs electrical parts, modules and subsystems to support the design of whole systems. Responsible for the complete design process, including requirements specification, feasibility studies, cost and scheduling, conducting various hand-on testing and analysis, such as circuit, timing, thermal/cooling, electrical loads; conceptual and detailed design using design tools (i.e. OrCAD, PSpice, etc...), detailed drawings, design review presentations, procurement of prototype parts, system integration, prototype testing, and handoff to manufacturing. These tasks will require working with other engineering groups such as ME, OE, SW, systems and manufacturing engineers to ensure flawless integration and test at the subsystem and system level. Develops the required supporting documentation, such as assembly and test procedures, and service manuals. Works closely with and manages suppliers to ensure all design requirements are specified and achieved. Addresses and resolves product issues thru the product phases. Has strong leadership, communication and problem solving skills. Minimum B.S. in electrical engineering 5 years experience Skills: Category Name Required Importance Experience Area of Expertise Electromechanical No 2 Area of Expertise Schematic Capture No 1 Areas of Expertise Circuit Design No 1 Areas of Expertise Electrical Troubleshooting No 1 Technical Skills Circuit Failure Mode Analysis No 1 Technical Skills Electrical Testing No 1 Technical Skills Schematic Development No 1 About Maxonic: Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients. Interested in Applying? Please apply with your most current resume. Feel free to contact Lavanya Dommeti (********************* / *************** for more details.

Core Responsibilities Execute comprehensive Hardware Validation testing for new silicon, focusing specifically on Battery Chain ICs and Power Management ICs (PMICs). Develop, set up, and perform validation test plans for performance, reliability, and functional verification of power-related hardware. Analyze test results, identify hardware defects, debug issues at the component and system level, and collaborate with design engineers to propose and verify fixes. Set up and expertly operate standard EE lab equipment, including oscilloscopes, digital multimeters, electronic loads (Battery Load management), and data logging equipment. Conduct testing under various environmental conditions, requiring experience with and operation of temperature chambers. Document validation procedures, test results, and bug reports clearly and meticulously. Contribute to the continuous improvement of validation methodologies and test coverage. Required Skills & Experience 3-4 years of professional experience in Electrical Engineering, specifically in hardware validation or characterization. Solid foundation in Electrical Engineering (EE) principles and analog/digital circuit theory. Proven experience in validating Battery Chain ICs (e.g., fuel gauge, charging circuits) and Power Management ICs (PMICs). Hands-on expertise in using and interpreting measurements from essential lab equipment: Oscilloscope (High-speed signal capture and analysis) Multimeter (Precision voltage, current, and resistance measurement) Electronic Loads / Battery Load Management systems Data Logging equipment for extended test monitoring. Experience with temperature chamber operation and performing tests across a wide range of temperatures. Strong analytical, problem-solving, and debugging skills. Excellent written and verbal communication skills for cross-functional collaboration.

What to Expect Consider before submitting an application: This position is expected to start around January 2026 and continue through the Winter/Spring term (ending approximately May 2026) or continuing into Summer 2026 if available and there is an opportunity to do so. We ask for a minimum of 12 weeks, full-time and on-site, for most internships. Our internship program is for students who are actively enrolled in an academic program. Recent graduates seeking employment after graduation and not returning to school should apply for full-time positions, not internships. International Students: If your work authorization is through CPT, please consult your school on your ability to work 40 hours per week before applying. You must be able to work 40 hours per week on-site. Many students will be limited to part-time during the academic year. The Internship Recruiting Team is driven by the passion to recognize and develop emerging talent. Our year-round program places the best students in positions where they will grow technically, professionally, and personally through their experience working closely with their manager, mentor, and team. We are dedicated to providing an experience that allows the intern to experience life at Tesla by including them in projects that are critical to their teams success. During your internship for the Optimus Actuator Design Team at Tesla, you will be working on interesting new robotic electromechanical actuator designs that power Teslas Optimus humanoid robot. We are seeking driven and accomplished engineering student candidates who will thrive in a fast paced and engaging design environment. What Youll Do CAD design of actuator components Prototype assembling and testing Python and Matlab test script and actuator model development What Youll Bring Excellent CAD skills in (CATIA or Solidworks) Mechanical design experience, both in part optimization and design for manufacturing (design, drawings, GDT) Experience with FEA based part design and optimization Python/Matlab knowledge, both in data structure management, UI development, symbolic equations, and iterative solvers Handy, with previous machining/shop experience / 3D printed part design experience Hands on actuator and component (motor, gear, sensors) testing Problem solving with first principles thinking Experience in Robotics is preferred Experience in Control Theory with basic understanding of motor and motion control is preferred Curious and communicative Compensation and BenefitsBenefits As a full-time Tesla Intern, you will be eligible for: Aetna PPO and HSA plans 2 medical plan options with $0 payroll deduction Family-building, fertility, adoption and surrogacy benefits Dental (including orthodontic coverage) and vision plans. Both have an option with a $0 payroll contribution Company Paid (Health Savings Account) HSA Contribution when enrolled in the High Deductible Medical Plan with HSA Healthcare and Dependent Care Flexible Spending Accounts (FSA) 401(k), Employee Stock Purchase Plans, and other financial benefits Company Paid Basic Life, ADD, and short-term disability insurance Employee Assistance Program Sick time after 90 days of employment and Paid Holidays Back-up childcare and parenting support resources Voluntary benefits to include: critical illness, hospital indemnity, accident insurance, theft legal services, and pet insurance Commuter benefits Employee discounts and perks program Expected Compensation$20.00 - $55.00 + benefits Pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements dependent on the position offered. Details of participation in these benefit plans will be provided if an employee receives an offer of employment. Tesla is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to any factor, including veteran status and disability status, protected by applicable federal, state or local laws. Tesla is also committed to working with and providing reasonable accommodations to individuals with disabilities. Please let your recruiter know if you need an accommodation at any point during the interview process. For quick access to screen reading technology compatible with this siteclick here to download a free compatible screen reader(free step by steptutorial can be found here). Please contact...@tesla.comfor additional information or to request accommodations. Privacy is a top priority for Tesla. We build it into our products and view it as an essential part of our business. To understand more about the data we collect and process as part of your application, please view our Tesla Talent Privacy Notice. #SPCareers

Happiest Minds, the Mindful IT Company, applies agile methodologies to enable digital transformation for enterprises and technology providers by delivering seamless customer experience, business efficiency and actionable insights. We leverage a spectrum of disruptive technologies such as: Big Data Analytics, AI & Cognitive Computing, Internet of Things, Cloud, Security, SDN-NFV, RPA, Blockchain, etc. Positioned as Born Digital . Born Agile , our capabilities spans across product engineering, digital business solutions, infrastructure management and security services. We deliver these services across industry sectors such as retail, consumer packaged goods, edutech, e-commerce, banking, insurance, hi-tech, engineering R&D, manufacturing, automotive and travel/transportation/hospitality. Headquartered in Bangalore, India; Happiest Minds has operations in USA, UK, The Netherlands, Australia and Middle East. Job Description: 10 to 15 years of relevant experience as a Hardware design and test engineer. Bachelor s degree in electrical engineering, electronics engineering, or equivalent. Excellent problem-solving/ debugging skills and attention to detail. Excellent written and oral communication. Active involvement in all phases of an embedded product development (Requirement Analysis, Design, Implementation, Prototyping, Documentation and Testing) Should be an expert in selecting components meeting cost, functionality, performance, regulatory and non-functional requirements such as long-term availability, size etc. Independently develop micro-controller and micro-processor-based designs with peripherals such as ADCs, DACs, storage, Ethernet PHYs etc Experience in/Knowledge of interfaces such as DDR3/4/5, PCIe Gen4 or higher, SATA, USB3.0/4.0, Ethernet, Display interfaces, Audio interfaces, SPI, I2C etc Proficient in developing Schematics using Cadence OrCAD tool Should be able to prepare the PCB layout guidelines and review the PCB layout using Cadence Allegro tool Experience in designing multi-layer PCBs considering EMI/EMC and signal integrity aspects Perform board bring-up tests, functional tests, and DVT Experience with hardware testing and debugging tools (e.g., Power Supply, Multimeter, Oscilloscopes, Logic analysers etc). Good to have: Conduct pre-compliance screening tests for EMI/EMC/Safety etc at third party labs Perform reliability analysis such DFMEA, MTBF prediction, HALT testing, ESS testing etc Experience in high-speed designs (interfaces such as PCIe Gen 5/6, USB4.x, DDR5, 10G/100G Ethernet etc) Signal Integrity testing, compliance testing

Role: Hardware Design Engineer - (high-speed PCBs design and Validation) Hire Type: Full Time About the job you're considering Design and develop high-speed PCBs, perform schematic and board-level reviews, and lead system bring-up using diagnostic tools. Validate and debug hardware at the unit level, ensuring compliance with test plans and documenting root causes and corrective actions. Must have experience with at least two PCB designs. Your role · Design high speed PCBs · Perform schematic and board level reviews. · Bring up PCBs and systems using diagnostic software. · Perform unit level validation of boards and systems following published guideline and test plan. · Debug assigned issues and document root cause and corrective action. · Worked on at least 2 PCB designs Your skills and experience · 5+ years' experience in PCB and system level development preferably in the server/computer/network industry · Experience with lab bring up and design validation. · Knowledge of high speed SerDes (>1G) interfaces, high speed design and signal integrity principles · Knowledgeable in X86 architecture, and a very good understanding of control interfaces such as PCIe, MDIO, SPI, I2C · Knowledgeable with power delivery and distribution techniques · Knowledgeable with CPLDs and FPGAs · Hands on board design knowledge, familiar with design tools including Cadence Concept and Allegro · Experience collaborating with other disciplines, including Diagnostics software, mechanical, signal integrity, thermal, manufacturing. Good communications skills and ability to collaborate in a team environment. Life at Capgemini Capgemini supports all aspects of your well-being throughout the changing stages of your life and career. For eligible employees, we offer: · Flexible work · Healthcare including dental, vision, mental health, and well-being programs · Financial well-being programs such as 401(k) and Employee Share Ownership Plan · Paid time off and paid holidays · Paid parental leave · Family building benefits like adoption assistance, surrogacy, and cryopreservation · Social well-being benefits like subsidized back-up child/elder care and tutoring · Mentoring, coaching and learning programs · Employee Resource Groups · Disaster Relief About Capgemini Engineering World leader in engineering and R&D services, Capgemini Engineering combines its broad industry knowledge and cutting-edge technologies in digital and software to support the convergence of the physical and digital worlds. Coupled with the capabilities of the rest of the Group, it helps clients to accelerate their journey towards Intelligent Industry. Capgemini Engineering has 65,000 engineer and scientist team members in over 30 countries across sectors including Aeronautics, Space, Defense, Naval, Automotive, Rail, Infrastructure & Transportation, Energy, Utilities &Chemicals, Life Sciences, Communications, Semiconductor & Electronics, Industrial & Consumer, Software & Internet. Capgemini Engineering is an integral part of the Capgemini Group, a global business and technology transformation partner, helping organizations to accelerate their dual transition to a digital and sustainable world, while creating tangible impact for enterprises and society. It is a responsible and diverse group of 340,000 team members in more than 50 countries. With its strong over 55-year heritage, Capgemini is trusted by its clients to unlock the value of technology to address the entire breadth of their business needs. It delivers end-to-end services and solutions leveraging strengths from strategy and design to engineering, all fueled by its market leading capabilities in AI, generative AI, cloud and data, combined with its deep industry expertise and partner ecosystem. The Group reported 2024 global revenues of €22.1 billion. Get the future you want | ***************** Capgemini discloses salary range information in compliance with state and local pay transparency obligations. The disclosed range represents the lowest to highest salary we, in good faith, believe we would pay for this role at the time of this posting, although we may ultimately pay more or less than the disclosed range, and the range may be modified in the future. The disclosed range takes into account the wide range of factors that are considered in making compensation decisions including, but not limited to, geographic location, relevant education, qualifications, certifications, experience, skills, seniority, performance, sales or revenue-based metrics, and business or organizational needs. At Capgemini, it is not typical for an individual to be hired at or near the top of the range for their role. The base salary range for the tagged location is $80,800 - $150,800 / year. This role may be eligible for other compensation including variable compensation, bonus, or commission. Full time regular employees are eligible for paid time off, medical/dental/vision insurance, 401(k), and any other benefits to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, or any other form of compensation that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. Disclaimer Capgemini is an Equal Opportunity Employer encouraging inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, national origin, gender identity/expression, age, religion, disability, sexual orientation, genetics, veteran status, marital status or any other characteristic protected by law. This is a general description of the Duties, Responsibilities and Qualifications required for this position. Physical, mental, sensory or environmental demands may be referenced in an attempt to communicate the manner in which this position traditionally is performed. Whenever necessary to provide individuals with disabilities an equal employment opportunity, Capgemini will consider reasonable accommodations that might involve varying job requirements and/or changing the way this job is performed, provided that such accommodations do not pose an undue hardship. Capgemini is committed to providing reasonable accommodations during our recruitment process. If you need assistance or accommodation, please reach out to your recruiting contact. Please be aware that Capgemini may capture your image (video or screenshot) during the interview process and that image may be used for verification, including during the hiring and onboarding process. Click the following link for more information on your rights as an Applicant http://*****************/resources/equal-employment-opportunity-is-the-law Applicants for employment in the US must have valid work authorization that does not now and/or will not in the future require sponsorship of a visa for employment authorization in the US by Capgemini.

Job Title Electrical Designer Salary -80k to 165k Industry : Construction We are an ENR top 10 Electrical Subcontractor that is rapidly growing and looking to add strong Electrical Designers to our team. The ideal candidate will be responsible for designing and developing electrical systems for the construction industry. Key Responsibilities Assist in the development of electrical system layouts and schematics. Utilize AutoCAD MEP and Revit to produce and manage design documentation. Support the selection of electrical equipment, materials, and system components in alignment with project requirements. Qualifications Bachelor's degree in Electrical Engineering or related field. Proficiency in AutoCAD MEP and Revit for electrical design applications. 1+years of experience of electrical design for a design-build electrical contractor or engineering firm. Benefits Strong Compensation package Tons of growth opportunities within the company Chance to work for a top electrical company with a great reputation in the industry. Medical, Vision, Dental Strong PTO Profit sharing 401k with a match Training programs to help you level up your career. Benefits OUR TRAINING PROGRAMS Cost estimating utilizing the latest software from Accubid Lighting design, photometry, and Title 24 compliance Power distribution and system architecture Basic procurement Field installation techniques Pre-fabrication design and implementation Our Benefits Medical, dental, and vision care Profit sharing/Company matching 401k Program Paid vacation/sick leave Fully paid life insurance policy Email Your Resume In Word To: Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: keith.ellis@cybercoders.com Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : KE2-1852790 -- in the email subject line for your application to be considered.*** Keith Ellis - Director of Recruiting For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance. This job was first posted by CyberCoders on 05/13/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.

Founding Hardware Engineer (Stealth Robotics Startup) On-Site • San Francisco, CA About Us We're a tiny, fast-moving team building autonomous systems for heavy industrial machines. We retrofit existing equipment with a plug-and-play autonomy kit that taps directly into machine controls and layers on a full perception + connectivity stack: multi-sensor vision, LiDAR, high-precision GNSS, IMU, and a low-latency tele-operation network. In just a few months, we've gone from first prototype to real machines operating on active job sites, with early recurring revenue and a growing pipeline of paid pilots. We're backed by top-tier early-stage investors along with a group of founder-operators who know what it takes to build in the real world. Our founding team has built and shipped hardware, software, and robotics systems before. We thrive where physical machinery, harsh environments, and rapid iteration collide. Why Join Us You want to work on problems that actually matter - fixing how the world builds things. Construction is the backbone of civilization, and it's currently broken. We're here to change that. You don't want a cushy robotics lab job. You want to build robots in the mud, on real sites, under real constraints. You'd rather spend a week living out of a dusty RV next to a machine you're debugging than polishing a slide deck. You want to see your designs move 20-50 tons of real hardware. You want to feel the stakes. You want teammates who operate at founder-level intensity and ownership. About You You're a hacker at heart - the kind of person who gets a prototype working before most people finish their planning doc. You've built something from scratch: a company, a product, a robot, a system - success not required, agency absolutely required. You work extremely hard, laugh often, and don't mind chaos. You prefer “figure it out now” to “wait for perfect requirements.” What You'll Own As a founding Hardware / Mechatronics Engineer, you'll design and build the core systems that enable remote operation, sensing, and autonomy assistance on industrial machines. You'll work across mechanical, electrical, and embedded disciplines, often all in the same day. System Design & Prototyping Architect and build tele-operation hardware systems, including power, compute, and control modules for machine retrofits. Sensor Integration Integrate and calibrate cameras, LiDAR, radar, GNSS, IMUs, and other sensors using interfaces like GMSL, CAN, and Ethernet. Electrical & Mechanical Integration Design robust wiring harnesses, brackets, mounts, and enclosures that survive real-world abuse. Communication Interfaces Implement and validate CAN, LIN, J1939, Serial, and Ethernet connections with both existing ECUs and custom control hardware. Manufacturing & DFM Work with vendors to bring designs from scrappy prototypes to reliable production, including DFM, testing, and validation. Testing & Validation Lead machine bring-up, HIL testing, and on-site debugging alongside software and autonomy engineers. Documentation & Design Produce schematics, harness drawings, CAD models, assembly docs, and anything else needed to build and scale the hardware. Compensation & Support Base: ~$250-380k Equity: ~1-3% Full health/dental/vision, relocation + visa support, downtown SF workspace with full electronics/mech prototyping tools, 401(k), high-spec laptop, and budget for any gear you need.

About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Duties/Responsibilities: Develop and refine electrical system layouts, schematics, and specifications. Review and process equipment and system submittals to ensure compliance with project requirements. Prepare and modify drawings, ensuring accuracy and clarity in design documentation. Utilize AutoCAD, Revit, and engineering analysis software for system design and documentation. Conduct power system analysis, including short circuit, voltage drop, and arc flash studies. Perform load calculations, lighting level analysis, and energy efficiency assessments. Support equipment selection, panel schedules, and system coordination. Ensure all designs adhere to NEC, energy codes, and client-specific guidelines. Collaborate with multidisciplinary teams to integrate electrical designs into overall project plans. Attend meetings with clients, architects, and contractors to resolve design issues and refine project scope. Conduct site visits to evaluate existing electrical conditions and support field installations. Contribute to the continuous improvement of our design processes. Provide engineering support during construction to ensure successful project execution. Required Skills/Abilities: Strong knowledge of electrical engineering principles, including power distribution and lighting systems. Proficiency in AutoCAD, Revit, and engineering analysis software. Familiarity with NEC and other relevant electrical codes and standards. Ability to analyze and interpret electrical specifications and technical documents. Effective problem-solving skills and the ability to manage multiple tasks. Actively contribute to a collaborative team environment, where your expertise and innovative ideas are highly valued. Strong communication skills, both written and verbal. Education and Experience: Bachelor's degree in Electrical Engineering, Architectural Engineering, or a related field. Minimum of 2 years of experience in electrical design or engineering within the construction industry. Engineer-In-Training (EIT) certification preferred, with encouragement to pursue Professional Engineer (PE) licensure. Experience with commercial, high-rise residential, or data center projects is appreciated. LEED AP certification is appreciated. Proficiency in Microsoft Office applications (Word, Excel, Outlook). Working Conditions This position is based in our Santa Clara office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

Atmosic Technologies is seeking passionate Hardware Systems Engineers to drive the development of differentiated, ultra-low-power wireless connectivity solutions. The specific job title and responsibilities will be determined based on the candidate's level of experience. Responsibilities: Design and develop robust reference solutions leveraging Atmosic's cutting-edge low-power wireless technology. System-level optimization of all components (RF, analog, digital, and software) to achieve peak performance while minimizing power consumption. Execute detailed system-level testing and debug prototype solutions. Collaborate closely with diverse, experienced cross-functional teams (SoC, RF VLSI, Software) to deliver world-class products. Develop and implement comprehensive test plans to rigorously validate chip functionality and characterize silicon performance. Requirements: MS in Electrical Engineering or a closely related field is mandatory. Minimum of 2 years of relevant experience in the validation and debugging of wireless SoCs. Possesses strong analytical and advanced debugging skills. Solid understanding of wireless communication and System-on-a-Chip (SoC) architectures. Proficiency with standard lab equipment, including but not limited to spectrum analyzers, logic analyzers, oscilloscopes, and multimeters. Competence in scripting or programming, with a preference for Python or C/C++. Nice to Have: Knowledge of common SoC interface, bus, and wireless protocols (e.g. I2C, SPI, AHB, Bluetooth Low Energy) Familiarity with RTL design and verification Knowledge of pre-silicon validation using FPGA Location: San Jose, California, USA

About 1X We're an AI and robotics company based in Palo Alto, California, on a mission to build a truly abundant society through general-purpose robots capable of performing any kind of work autonomously. We believe that to truly understand the world and grow in intelligence, humanoid robots must live and learn alongside us. That's why we're focused on developing friendly home robots designed to integrate seamlessly into everyday life. We're looking for curious, driven, and passionate people who want to help shape the future of robotics and AI. If this mission excites you, we'd be thrilled to hear from you and explore how you might contribute to our journey. Role Overview We are looking for an Electrical Engineering Intern to join our Prototyping Team Spring 2026 (Jan 5th - June12th). In this hands-on role, you'll support hardware development for our humanoid robots by contributing to electrical assembly, testing, and design integration. You'll work closely with engineers and designers to build critical components of our next robot revision. This is a full-time, in-person internship based in Palo Alto, with the potential to convert into a full-time offer for the right candidate.

Basic Qualifications Candidates should demonstrate a thorough understanding of engineering technology. Engineering Interns must be enrolled in an accredited degree program in Computer Engineering, Systems Engineering, Software Engineering, Electrical Engineering or other related scientific or technical discipline with a preference for a standing of a sophomore or higher. Due to the nature of work performed within our facilities, U.S. citizenship is generally required. Responsibilities for this Position REPRESENTATIVE DUTIES AND TASKS: Apply your classroom-learned skills to a program supporting the defense of our country. GDMS has an immediate opening for an Engineering Intern to join our team. The position provides an opportunity to work on projects that support some of our nations fundamental defense services. GDMS employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national security missions. The selected candidate will work with collaborative teams on various technical projects associated with our core mission. In addition to receiving a competitive wage, the Engineering Intern will enhance their skill set by working among a talented and technically accomplished group of colleagues. Interns will also enjoy a flexible work environment where contributions are recognized and rewarded. Working Place: San Jose, California, United States Company : General Dynamics Mission Systems

We're ALSO, an electric mobility company originally conceived as a part of Rivian. We're a passionate team of builders, dreamers, doers and innovators, focused on creating entirely new (not to mention, innovative and delightful) vertically integrated, small EVs designed to meet the global mobility challenges of today and tomorrow. Our mission is to inspire everyone to ride ALSO-replacing many local car, truck and SUV miles with ones on vehicles that are more affordable, more enjoyable and 10-50x more efficient. ALSO is seeking an Electrical Engineering Intern who's excited to work in a fast-paced startup environment and eager to help design and develop the next generation of ALSO vehicles and components. What You Will Do System integration and test Validation test setup and operation Determine test scope, participate in testing and generate test reports Lower complexity printed circuit board design Functional testing and creation of test set-up Design and build custom test equipment such as test PCBAs, harnesses, and overall system design to make validation efficient, modular, and repeatable Manage projects from initial concept through design, assembly, and final commissioning Write and maintain test software to automate test execution, data collection and analysis Develop and maintain validation schedules to coordinate test resources and communicate status to program managers. What You Will Learn System integration fundamentals (electrical, firmware, mechanical and other systems interaction) System validation and testing (test scope definition, test planning and execution, documenting and reporting) Basics of PCBA design (component selection, placement, routing, fabrication, thermals) Engineering project management (starting with a project concept, planning out the execution, cross functional collaboration) What You Will Bring Pursuing a Bachelor's in Electrical Engineering, with an expected graduation date in 2027. Available Summer 2026 Strong problem solving and communication skills Experience with electronics CAD (Altium preferred but other systems acceptable) Experience making or testing or other hands on experience with actual hardware or software; especially personal project not related to work or school What will you Gain: Real experience building products Highly marketable skills in HW development Strong portfolio of deliverables Cross functional collaboration skills Hands on tools experience Strong confidence in owning and delivering an engineering project Preferred Experience Experience designing or prototyping EV, e-bike, or consumer electronic components. Hands-on experience using common EE lab equipment (power supplies, oscilloscopes, multimeters, various scope probes..) Previous internship or project work in a startup, automotive, or mobility company. The hourly rate for this role ranges from $30.00 to $50.00/hr, based on experience and qualifications. Why ALSO. We're passionate about helping the world find a better way to get there-wherever it is you're headed. We're located in the heart of Silicon Valley and have brought together a world-class team from some of the biggest brands in the technology, automotive, cycling, outdoor recreation and retail spaces. Together we're working hands-on to imagine, design and build an entirely new solution to a global set of transportation challenges. Perks and Benefits Robust health coverage. Excellent health, dental and vision insurance covered up to 100% by ALSO with FSA & HSA options. One Medical membership and dedicated insurance advocates. Rich fertility and family building benefits with Progyny. Flexible time off. 401(k) match.

Why LeoLabs?At LeoLabs, we're building the living map of activity in space. Through our proprietary global radar network and AI-enabled analytics platform, we collect millions of measurements daily on more than 24,000 objects in low Earth orbit (LEO). Our radar-powered intelligence protects billions in assets, monitors adversarial behavior, and ensures safe operations for commercial and government missions. We're not just building technology, we are redefining global security, safety, and transparency in space. As orbital activity accelerates and threats grow more complex, LeoLabs is a trusted partner for Space Domain Awareness, Space Traffic Management, and Satellite Operations for top-tier space operators and allied defense organizations. If you're looking to work on mission-critical challenges at the forefront of aerospace, national security, and AI, your impact starts here. The Opportunity At LeoLabs, our Hardware Engineering Team designs, develops, manufactures, and deploys the advanced radar systems that provide persistent orbital intelligence to our customers worldwide. As an Electrical Engineering Intern, you'll dive straight into hands-on work with cutting-edge radar technology while supporting the development, testing, and integration of new hardware. You'll collaborate with experienced engineers, operate lab equipment, and contribute directly to active radar programs. During your internship, you will also lead your own project like designing and building a custom PCB, while supporting day-to-day lab activities that keep our radar development moving forward. What You'll Do · Operate RF lab equipment including spectrum analyzers, oscilloscopes, and signal generators. · Support bring-up, testing, and troubleshooting of radar electronics and subsystems. · Perform soldering, rework, and basic PCB assembly or modification tasks. · Assist in data collection and analysis for hardware verification. · Collaborate with engineers to review schematics and layouts in Altium Designer or similar tools. · Own a hands-on design project, such as developing, fabricating, and testing a small PCB to support radar system development. What We're Looking For · Currently pursuing a B.S. in Electrical Engineering or related discipline. · Rising junior or senior (expected graduation 2026 or 2027). · Strong interest in hardware design, testing, and hands-on lab work. · Familiarity with lab instrumentation and electrical test fundamentals. · Experience with or exposure to eCAD tools (Altium Designer preferred). · Comfortable working independently with guidance in a collaborative lab environment. You'll Gain Experience In · Real-world electrical and RF testing procedures. · PCB design, fabrication, rework, and bring-up. · Hardware debugging and measurement documentation. · Exposure to radar system development and integration workflows. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, disability, or status as a protected veteran.

We are creating devices that enable a bi-directional interface with the brain. These devices allow us to restore movement to the paralyzed, restore sight to the blind, and revolutionize how humans interact with their digital world. Team Description: To achieve Neuralink's mission and provide our technology to those that need it, the surgical process that implants our cutting-edge devices must be exceptionally safe, efficient, and scalable. The surgical robot we design is key to enabling this, and the Robot Electrical Engineering Team supports this by designing, testing, and integrating all electrical aspects of our robot, encompassing a diverse range of fundamental electrical engineering domains while also working closely with the optical, mechanical, and software engineering teams. Job Description and Responsibilities: As an Electrical Engineering Intern you'll own meaningful projects and make substantial contributions as an integral member of our fast-moving team. You will be expected to design, verify, and oversee the transition to production of a variety of custom electronics systems while additionally supporting broader team efforts through debugging, manufacturing, testing, and more. Specific responsibilities and projects may include: All phases of board design (part selection, schematic design, layout, and bring-up) Custom motor drivers, from transistor selection to control loop design Custom high-bandwidth, low-latency, camera hardware and firmware Custom FPGA based Optical Coherence Tomography data acquisition systems Testing hardware such as Hardware-In-The-Loop systems, validation boards, and life-cycle testing rigs Case studies on future system architectures including new compute platforms, redesigned actuator layouts, and deep-brain imaging systems Required Qualifications: Demonstrable experience developing circuits or products that have been used by real customers. Student design team work and personal projects may apply Circuit board design experience demonstrating advanced knowledge in at least one niche, for example high density (HDI), high speed digital, high power, radio frequency, atypical materials or constructions, etc. Experience with sensors, power management, and signal/power integrity Design experience with common communication protocols (SPI, UART, I2C, etc.) Competent with common lab equipment (oscilloscopes, power supplies, etc.) Preferred Qualifications: A portfolio showing examples of projects you've completed. Demonstrable experience in developing electronics for critical systems in fields such as medical devices, aerospace, automotive, or military. Experience with firmware development for embedded systems (C/C++, Rust) Experience with software development for Linux systems (Python, C++, Rust) Pay Transparency: Based on California law, the following details are for California individuals only: California Hourly Rate: $35/hr USD What We Offer: Full-time employees are eligible for the following benefits listed below. An opportunity to change the world and work with some of the smartest and most talented experts from different fields Growth potential; we rapidly advance team members who have an outsized impact Excellent medical, dental, and vision insurance through a PPO plan Paid holidays Commuter benefits Meals provided Equity (RSUs) *Temporary Employees & Interns excluded 401(k) plan *Interns initially excluded until they work 1,000 hours Parental leave *Temporary Employees & Interns excluded Flexible time off *Temporary Employees & Interns excluded

Figure is a AI Robotics company developing a general purpose humanoid. Our Humanoid is designed for corporate tasks targeting labor shortages and jobs that are undesirable or unsafe. We are based in San Jose, CA and require 5 days/week in-office collaboration. It's time to build. We are looking for an Electrical Engineer Intern for Summer 2026 to support the design and test of critical hardware components. This internship is designed for students in their final year of an undergraduate or master's program, as well as recent graduates who are on track to complete their degree by the end of 2026, or the following year. Responsibilities: Design and test full or sub sections of PCBAs on the Humanoid like power distribution boards, battery management systems, sensing boards, motor controllers, or computer boards Support the review of design artifacts (schematics, layouts, bill of materials…) from your peers or external suppliers Support system integration and test activities by contributing to test execution and problem diagnostics and resolution Requirements: Undergraduate student (Senior) or recent graduate in Electrical Engineering or related field Minimum 10 weeks internship, 1 to 2 terms preferred Solid EE fundamentals with hands-on experience designing, building, and testing PCBAs Experience with design automation (EDA) tools, preferably Altium in both schematics and layout Experience with power electronics (motor driver, switch mode power supplies…), digital electronics (MCU, FPGA, Ethernet, USB, SPI, I2C…), and analog electronics (filters, ADC/DAC…) Strong verbal and written communication skills Bonus Qualifications: Experience using LTspice, Python, and Matlab Embedded programming of DSPs, microcontrollers, and FPGAs Basic understanding of mechanical design fundamentals The US hourly range for this internship position is between $35 - $45/hr. The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.

We are looking for a junior-mid level Electrical Engineer with strong PCBA experience and exposure to supplier quality. This role blends hands-on electrical engineering with quality support across PCBA builds, incoming inspection, and supplier issue resolution. This position is ideal for someone who enjoys hardware, understands how boards are built and tested, and wants to gain experience across both product development and supplier quality-without requiring senior-level design ownership. Location: East Bay Area Compensation (Full Time): $130,000-$145,000 (DOE) Key Responsibilities: Electrical Engineering (50-60%) Support electrical testing, bring-up, and PCBA debugging Review schematics, layouts, and assembly drawings; create supporting test documentation Execute board-level validation and record clean, accurate test data Assist with component evaluations and engineering change updates Perform electrical troubleshooting during prototype and development builds Collaborate with systems, mechanical, and manufacturing engineering teams Supplier Quality Engineering (40-50%) Provide technical feedback to suppliers on PCBA build quality and assembly issues Support incoming inspection and identify workmanship or electrical concerns Assist with NCRs, issue tracking, and quality documentation Participate in DFM reviews and provide actionable feedback Drive corrective actions and verify effectiveness through electrical testing Review supplier test reports, workmanship standards, and compliance to specs Maintain quality records and support quality-system requirements Required Qualifications Bachelor's degree in Electrical Engineering, Electronics, or related field 2-4 years of experience with PCBAs, electrical assemblies, or electronics manufacturing Ability to interpret schematics, layouts, and BOMs Hands-on experience with common test equipment (multimeter, oscilloscope, power supplies) Familiarity with PCBA manufacturing processes and component-level troubleshooting Preferred Qualifications Exposure to supplier quality processes, DFM feedback, NCRs, or corrective actions Knowledge of standards such as IPC-A-610 or ISO 9001 Experience working with contract manufacturers or external suppliers Background in FA, RCA, or reliability activities (not required but beneficial) Ideal Candidate Profile Comfortable balancing both engineering and quality responsibilities Hands-on, detail-oriented, and confident communicating with suppliers Enjoys PCBA-level technical work and identifying issues early in the build cycle Strong problem solver who thrives in fast-paced development environments Interested in growing into electrical, manufacturing, or quality engineering career paths #IND-SPG Estimated Min Rate: $130000.00 Estimated Max Rate: $145000.00 What's In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh's network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh's extensive talent community that will provide you with access to Yoh's vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week) Health Savings Account (HSA) (for employees working 20+ hours per week) Life & Disability Insurance (for employees working 20+ hours per week) MetLife Voluntary Benefits Employee Assistance Program (EAP) 401K Retirement Savings Plan Direct Deposit & weekly epayroll Referral Bonus Programs Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit ************************************************ to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh's hiring clients' preferences. To learn more about Yoh's privacy practices, please see our Candidate Privacy Notice: **********************************

Founding Hardware Engineer (Stealth Robotics Startup) On-Site • San Francisco, CA About Us We're a tiny, fast-moving team building autonomous systems for heavy industrial machines. We retrofit existing equipment with a plug-and-play autonomy kit that taps directly into machine controls and layers on a full perception + connectivity stack: multi-sensor vision, LiDAR, high-precision GNSS, IMU, and a low-latency tele-operation network. In just a few months, we've gone from first prototype to real machines operating on active job sites, with early recurring revenue and a growing pipeline of paid pilots. We're backed by top-tier early-stage investors along with a group of founder-operators who know what it takes to build in the real world. Our founding team has built and shipped hardware, software, and robotics systems before. We thrive where physical machinery, harsh environments, and rapid iteration collide. Why Join Us You want to work on problems that actually matter - fixing how the world builds things. Construction is the backbone of civilization, and it's currently broken. We're here to change that. You don't want a cushy robotics lab job. You want to build robots in the mud, on real sites, under real constraints. You'd rather spend a week living out of a dusty RV next to a machine you're debugging than polishing a slide deck. You want to see your designs move 20-50 tons of real hardware. You want to feel the stakes. You want teammates who operate at founder-level intensity and ownership. About You You're a hacker at heart - the kind of person who gets a prototype working before most people finish their planning doc. You've built something from scratch: a company, a product, a robot, a system - success not required, agency absolutely required. You work extremely hard, laugh often, and don't mind chaos. You prefer “figure it out now” to “wait for perfect requirements.” What You'll Own As a founding Hardware / Mechatronics Engineer, you'll design and build the core systems that enable remote operation, sensing, and autonomy assistance on industrial machines. You'll work across mechanical, electrical, and embedded disciplines, often all in the same day. System Design & Prototyping Architect and build tele-operation hardware systems, including power, compute, and control modules for machine retrofits. Sensor Integration Integrate and calibrate cameras, LiDAR, radar, GNSS, IMUs, and other sensors using interfaces like GMSL, CAN, and Ethernet. Electrical & Mechanical Integration Design robust wiring harnesses, brackets, mounts, and enclosures that survive real-world abuse. Communication Interfaces Implement and validate CAN, LIN, J1939, Serial, and Ethernet connections with both existing ECUs and custom control hardware. Manufacturing & DFM Work with vendors to bring designs from scrappy prototypes to reliable production, including DFM, testing, and validation. Testing & Validation Lead machine bring-up, HIL testing, and on-site debugging alongside software and autonomy engineers. Documentation & Design Produce schematics, harness drawings, CAD models, assembly docs, and anything else needed to build and scale the hardware. Compensation & Support Base: ~$250-380k Equity: ~1-3% Full health/dental/vision, relocation + visa support, downtown SF workspace with full electronics/mech prototyping tools, 401(k), high-spec laptop, and budget for any gear you need.