Top Electrical Engineer Internship Skills

Below we've compiled a list of the most important skills for an Electrical Engineer Internship. We ranked the top skills based on the percentage of Electrical Engineer Internship resumes they appeared on. For example, 11.7% of Electrical Engineer Internship resumes contained Electrical Systems as a skill. Let's find out what skills an Electrical Engineer Internship actually needs in order to be successful in the workplace.

The six most common skills found on Electrical Engineer Internship resumes in 2020. Read below to see the full list.

1. Electrical Systems

high Demand
Here's how Electrical Systems is used in Electrical Engineer Internship jobs:
  • Prepare technical drawings and specifications of electrical systems to ensure that installation and operations conform to standards and customer requirements.
  • Prepared designs, specifications, and drawings for repair and replacement/upgrade of building electrical systems and other related systems/components.
  • Designed power and distribution requirements for electrical systems in commercial buildings * Produced electrical blueprints via AutoCad
  • Performed electrical systems design - analyzed, designed to specifications, and prepared 2D AutoCADdrawings.
  • Preformed endurance testing for carts on electrical systems to test reliability.
  • Design and development of electrical systems Schematic creation from existing circuits
  • Conducted testing to ensure the proper functionality of electrical systems.
  • Project management of all electrical systems for prototype lunar rover.
  • Designed and supported electrical systems for automated rock quarries.
  • Developed internal electrical systems on large-scale commercial projects.
  • Debugged electrical systems using electrical instruments.
  • Worked on projects including but not limited to safety and compliance of the electrical systems and workers who work within NTC.
  • Maintained the electrical systems on NYPA's ice breaker marine fleet in accordance with the Coast Guard regulations.
  • Carried out Type Approval and Plan Approval review as part of the design assessment of various electrical systems.
  • Assisted in electrical systems design, power distribution, lighting, and in Power-System Protection devices.
  • Drafted layouts of the facility's electrical systems Worked to complete annual maintenance on electrical systems.
  • Designed and drafted complete electrical systems for commercial and residential buildings based on client requests.
  • Trained on operation and maintenance of electrical systems in oil and gas production facilities.
  • Conducted the coordination studies of electrical systems to evaluate the integrity of the service
  • Inspected all electrical systems throughout the building to ensure efficiency and proper functioning.

Show More

2. Autocad Electrical

high Demand
Here's how Autocad Electrical is used in Electrical Engineer Internship jobs:
  • Perform wiring diagram revision and updates for aircraft electrical systems using AutoCAD Electrical 2013.
  • Designed AutoCAD Electrical drawings for standardized and custom job orders.
  • Take projects from start to completion by designing electrical hardware using AutoCad Electrical 2013.
  • Coordinate with architects, project managers, and electrical contractors using various software: AutoCAD Electrical, MEP and Revit.
  • Utilize AutoCAD Electrical and ProE to render, review, and print engineeringdrawings.

Show More

3. PCB

high Demand
Here's how PCB is used in Electrical Engineer Internship jobs:
  • Ground Fault Detection circuit design and prototype -PCB layout -Surface-mount soldering -Power electronics circuitry research and experimentation
  • Designed high frequency clocking circuits for PLL/Digital Synthesizer and performed associated PCB layout.
  • Completed digital signal integrity verification on of 30-layer PCB for UltraFLEX platform
  • Designed PCB sample holders and associated test equipment for electrical measurements.
  • Designed conductivity sensor PCB used to measure conductivity of solutions.
  • Created schematic/PCB layout and successfully tested board using simulated battery
  • Devised system to ensure PCB manufacturing quality
  • Assist and prototype their upcoming products with EagleCAD for PCB design and collaborated with software and bio-engineer to complete the project.
  • Used Eagle to lay out a schematic as well as trace the PCB in attempts to develop a battery tester.
  • Mastered the development of a printed circuit board and mounting the components on the PCB using the soldering iron.
  • Based on the layout, welded various components on PCB board, and test rosin joint or short circuit.
  • Designed a Printed Circuit Board (PCB) for a medical system control interface, which utilized a PIC.
  • Designed a 4-layer PCB using KiCAD for test engineers at the NPD (New product development) department.
  • Designed projects which include high power circuit design and debugging, PCB layout design and Embedded firmware development.
  • Learned the basics of Eagle PCB design software used to create pulsed current sources for LED reliability testing.
  • Designed test fixture to perform PCB testing automatically, selected devices including probes, power supply, fuse.
  • Validated a PCBA tester for large scale manufacturing by failure injections to gauge the reliability of the ATE.
  • Worked with a senior engineer to create circuit diagrams and PCB layouts for 2 different filters with chokes.
  • Automated test reduced the test duration of each processor board from 6 minutes to 45 seconds per PCB.
  • Redesigned the schematic and PCB layout of the RLB to produce a new PCB board using PCB Artist.

Show More

4. PLC

high Demand
Here's how PLC is used in Electrical Engineer Internship jobs:
  • Acquired knowledge of PLC control cabinets and electrical engineering industrial design.
  • Utilized PLC controls to automate industrial machinery.
  • Integrated a supervisory control for a PLC water treatment machine using Programming Language Siemens Step7 and supervisory system Win-CC Flexible 2007.
  • Used Structured test PLC programming for controller to alert and trip the main switch, during high temperatures.
  • Modified and created Allen Bradley PLC programs, for the purpose of continuous improvement and maintenance.
  • Programmed a new logic controller that replaced the original relay control circuits using Mitsubishi PLC.
  • Assisted in Controls and Automation upgrades for large-scale operations(consisting of PLC/SCADA design).
  • Hired as an engineer intern tasked with programming PLC's per customer's requests.
  • Designed and built PLC-based control panel to support performance testing in electric plant.
  • Installed and programmed automatic servo valve pressure relief system using PLC feedback monitoring.
  • Worked on a project 'Interfacing of PLC to CNC Drilling Machine'.
  • Modified PLC code to accommodate new manufacturing modes in RS Studio 5000.
  • Develop, maintain, and improve Allen Bradley PLC based control programs.
  • Reviewed design of safety systems, SCADA systems and PLC's.
  • Developed PLC Program for the Motors and VFD associated with Process.
  • Worked on PLC conversions and upgrades using Rockwell software and equipment.
  • Designed PLC programs and provided solutions to the custom engineering projects.
  • Design, implementation and commissioning of system controlled by PLC.
  • Ensured all plans for wiring and PLC panels were accurate.
  • Composed technical specifications qualifying a PLC for a nuclear plant.

Show More

5. CAD

high Demand
Here's how CAD is used in Electrical Engineer Internship jobs:
  • Designed and quality controlled industrial control systems in AutoCad Electrical utilizing relay logic in accordance with UL standards.
  • Collaborated with mechanical engineers to modify AutoCAD drawings to accommodate appropriate grounding and wiring safety practices.
  • Translated the electrical blueprints of downtown buildings into graphic representations using advanced Auto CADD techniques.
  • Input electrical design mark-ups into AutoCAD architectural plans of commercial buildings drawn by engineers.
  • Upgraded existing electrical designs using AutoCAD while working with design engineers and project managers.
  • Used AutoCAD Electrical to design electrical and pneumatic schematics for custom automation machines.
  • Performed impedance matching for the generation of plasma and electrical drawings using AutoCAD
  • Designed machine parts using AutoCAD software for system alterations and feature enhancements.
  • Followed established AutoCAD standardization and maintained drawing files and bidding documents.
  • Designed detailed CAD drawings and Loop Sheets for electrical/mechanical project endeavors.
  • Utilized engineering analysis software and SCADA data for system improvements.
  • Wired machine panels and modified electrical drawings using AutoCAD software.
  • Improved utility transmission and distribution design projects using AutoCAD.
  • Modified engineering drawings in AutoCAD to improve Configuration Management.
  • Formulated the model of auto air-conditioner accessories using AutoCAD.
  • Designed one-line electrical diagrams within AutoCADlt and EasyPower software.
  • Designed robot components and calibration equipment using CAD software.
  • Designed circuits using AutoCAD to generate detailed computer drawings.
  • Designed electrical drawing using AutoCAD for instrument control panel.
  • Updated AutoCAD electrical drawings to reflect current specifications.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Circuit Boards

high Demand
Here's how Circuit Boards is used in Electrical Engineer Internship jobs:
  • Reviewed, tested and calibrated new digital circuit boards designed to integrated data acquisition.
  • Calibrated and troubleshot electronic circuit boards down to component level, using electronic schematics.
  • Completed final acceptance testing of production circuit boards following written test procedures.
  • Populated Printed Circuit Boards for prototyping and commercial purposes.
  • Test assembled circuit boards to verify target functionality.
  • Designed a set of printed-circuit boards for several tasks, including a noise-detection circuit for ground-induced current in power distribution systems.
  • Build, test and troubleshoot circuit boards at the component level utilized variety of test instruments for x-ray systems.
  • Gained skills in troubleshooting and basic design through designing high voltage test equipment for Radio transmitter circuit boards.
  • Worked in test department debugging and testing circuit boards for Companies such as Sierra Nevada and Syracuse Engineering.
  • Conducted stress and performance tests on hardware including circuit boards, processors and power supply cards.
  • Developed and designed test procedures for systems and circuit boards in wind energy devices.
  • Designed, built, and successfully tested circuit boards for notch head steel-strap machine.
  • Constructed, tested & debugged Postal Security Device Form Factor Rapid Prototype Circuit boards.
  • Assisted in building prototype circuit boards, ordering different components and making wire harnesses.
  • Soldered resistors, diodes, capacitors and other parts to over 100 circuit boards
  • Provided weekly reviews on the status of circuit boards and organized online documents.
  • Diagnose, troubleshoot, and repair surface mount and through hole circuit boards.
  • Analyzed, troubleshoot and repaired printed circuit boards to the component level.
  • Assist consultant to develop, test, and evaluate prototype circuit boards.
  • Investigated various failing circuit boards to discover and fix overpowering issues.

Show More

7. Ladder Logic

high Demand
Here's how Ladder Logic is used in Electrical Engineer Internship jobs:
  • Engineered electrical schematics for projects, and used ladder logic and electrical theory to troubleshoot electrical issues.
  • Used ladder logic within AutoCad Electrical to design the schematic and layout of a 400V control panel.
  • Aided in PLC (Mitsubishi) ladder logic programming and device maintenance in manufacturing cells.
  • Programmed PLC units using Ladder Logic to configure network access to devices from Windows machines.
  • Worked on Allen Bradley PLC, Ladder Logic programming and ability to troubleshoot equipment.
  • Developed specific PLC ladder logic test programs in RS Logix-5000 and Siemens S7-300.
  • Worked on a Test-Wagon prototype designed to test PLC ladder logic.
  • Used ladder logic to program the PLC to do simple tasks.
  • Ladder Logic and C++ programming were utilized to program the PLC.
  • Developed electrical schematics, control logics, panel layouts and ladder logic for implementation in software.
  • Designed the ladder logic using Allen-Bradley RSLogix5000 for a reheat furnace control operation.
  • Converted Relays Logics to PLC ladder logic.
  • Utilized extensive programmingexperience in ladder logic; worked with Allen Bradley and Hitachi PLCs.
  • Learn and implement Ladder Logic as used in Modicon PLCs.

Show More

8. Control Systems

high Demand
Here's how Control Systems is used in Electrical Engineer Internship jobs:
  • Participated in establishing new quality standards and implementing quality control systems that improved quality of equipment installations and operations.
  • Partnered with Systems Engineering Department in monitoring HVAC control systems and suggesting improvements for better performance.
  • Developed upgrade procedures for 'smart building' infrastructure and environmental control systems.
  • Installed, calibrated and maintained electrical control systems.
  • Evaluated required orbital maneuvers and developed specifications for the control systems including attitude sensors, reaction wheels, and torque rods.
  • Served on the design team for Mass-Spec booths which involved auto clamping, shell method, and control systems.
  • Assisted with the research and development of Power Motion Control systems for treadmills, cross-trainers, and stationary bicycles.
  • Reviewed specification for power and control systems, load calculations, project build, equipment sizing and selection.
  • Selected to learn and contribute knowledge in line automation, design, and apply control systems methods.
  • Perform engineering tasks such as, design, and implement corrections to various control systems.
  • Perform responsibilities of reviewing the design, status and issues of electrical control systems.
  • Coordinated with mechanical, process, control systems engineers, and also field technicians.
  • Construct, test, maintain, and repair substation relay and control systems.
  • Worked with different engineers on projects focusing on plant power and control systems.
  • Assisted with computer programming to program PLC based control systems for manufacturing equipment.
  • Control systems such as SCADA, Distributed Control Systems (DCS).
  • Assisted in developing test plan for control systems software on Windows platform.
  • Work directly with customers to answer technical questions regarding their control systems.
  • Tested and fixed control systems for various projects and orders.
  • Point to point wiring and schematic updates of control systems.

Show More

9. Test Procedures

high Demand
Here's how Test Procedures is used in Electrical Engineer Internship jobs:
  • Worked with electrical engineers and avionics technicians on test procedures for current avionics systems and certification procedures for new avionics packages.
  • Performed multiple test procedures to produce high volume of electronic assemblies that met quality standards and customer specifications.
  • Developed quality acceptance test procedures, modifications and reports for an intercom system.
  • Performed environmental and electrical test on antenna, generated test procedures.
  • Created documentation on test procedures and data logging procedures.
  • Worked on test procedures for various military systems
  • Created detailed test procedures and bug reports for IND560 and IND780 flexible weighing terminals.
  • Assist with interpreting and performing qualification test, acceptance test procedures and reports.
  • Updated, wrote and verified test procedures and other technical documents.
  • Prepared the lab and readied lab equipment for test procedures.
  • Implemented and documented test procedures for Wall Partition Interface product.
  • Designed and documented EEPROM test procedures using MATLAB.
  • Authored detailed test procedures for thermal chamber.
  • Write test procedures to verify design requirements.
  • Read and update test procedures.
  • Assemble and install test system and update specifications related to test procedures for the THz prototype and testing system.

Show More

10. Troubleshoot

high Demand
Here's how Troubleshoot is used in Electrical Engineer Internship jobs:
  • Assisted in installation/debugging/troubleshooting during commissioning of new equipment/system.
  • Single Line diagram & Transformer Specification Efficiency upgrades for Electrostatic Precipitation PLC Troubleshooting Process Improvement - Microwave Moisture Analyzer
  • Updated electrical schematics and assisted with troubleshooting/programming machinery * Created/maintained custom database software * Created and maintained electrical schematics
  • Developed implemented testing and troubleshooting procedures carried out failure root and identified and resolved assembly issues.
  • Updated/calibrated controller software and firmware for Hexagon's TesaStar/ReniShaw probes; troubleshoot electrical problems.
  • Operated ICT and AOI inspection equipment to troubleshoot electronic assemblies and meet performance specifications.
  • Relayed information to engineering and manufacturing departments to solve issues found by troubleshooting.
  • Conducted repairing, calibrating, testing and troubleshooting of aviation electronic testing equipment.
  • Performed voltage and amperage tests to troubleshoot commercial appliances/made changes to electrical schematics.
  • Performed electrical analysis to troubleshoot and resolve performance issues with testing equipment.
  • Carried out strategic analysis, troubleshooting and developed solutions for malfunctioning systems.
  • Performed troubleshooting, functional testing, and circuit analysis of analog/digital electronics.
  • Performed testing and troubleshooting of different analog/digital components and PC boards.
  • Implemented troubleshooting routines to quality by minimizing error and system failures.
  • Assisted Quality Control department by troubleshooting customer returns and defective parts.
  • Coordinated electric troubleshooters field work with customer needs and provided assistance.
  • Worked with experienced engineers to design and troubleshoot electronic circuits.
  • Completed Level 4 troubleshooting course on electrical and hydraulic components.
  • Aided in different troubleshooting operations in dynamic production areas.
  • Maintained test equipment readiness through troubleshooting and routine maintenance.

Show More

11. Labview

high Demand
Here's how Labview is used in Electrical Engineer Internship jobs:
  • Developed improvements to GPS software and controls software currently used in locomotive simulator environment using the LabVIEW graphical programming language.
  • Automated the aforementioned testing procedure using LabVIEW virtual interface to insure accurate test as to reduce human error.
  • Designed code and interfaces to maintain constant temperature environments for radio telescope receivers using LabView.
  • Modified existing LabVIEW software that administered training routines to rabbits.
  • Implemented LabVIEW based semi-automated component test system for mixer classification.
  • Designed and developed LabView programs to interface lab equipment.
  • Constructed new survey cart for Heat Treat and Die Design departments which uses LabView Signal Express - Debugged and solved after-cooler system
  • Learned how to use LabView to control test equipment using GPIB cables, and passed the CLAD Exam.
  • Build circuit to drive DC motor based on MOSFET, and collected experimental data with LABVIEW.
  • Designed and developed an automated system to update firmware and configuration of multiple switches using LabVIEW.
  • Manipulated previously written code over several versions of LabVIEW releases, up to and including LabVIEW2012.
  • Developed virtual locomotive air brakes using LABVIEW to be used as hardware in the loop.
  • Designed and Constructed various LED Drive Systems using BJT Amplifiers (LABVIEW).
  • Designed the User Interface and controls for the Magnetic Field Mapper in LabVIEW.
  • Implemented a LabVIEW based virtual instrument for testing of the source control.
  • Utilized LabVIEW and MATLAB with actuators, sensors, and current switches.
  • Learned about PXI based architecture, NI LabView and NI TestStand.
  • Designed test software with LabVIEW for CAN based instrument cluster.
  • Designed user interface programs in LabView, assembled custom cables
  • Automated department EMI/EMC testing with National Instruments LabVIEW software.

Show More

12. Analog

high Demand
Here's how Analog is used in Electrical Engineer Internship jobs:
  • Designed digital and analog electronics for active and passive acoustic sensor systems.
  • Developed analog integrated circuits from specification to IC layout using Cadence.
  • Analyzed analog circuits related to reactor safety ventilation fans.
  • Led an effort with production and quality control to assess the risk of saving an analog switch from obsolescence.
  • Served as an intern to design, build, and test a digitally programmable active analog filter prototype.
  • Utilized Analog meter and oscilloscope to measure the voltage through pathways outlined by a self-drawn block diagram.
  • Used Oscilloscope on Ford ECU module to test for correct analog voltage range of 0-5V.
  • Assisted in the development of new analog and digital control loops for safety systems.
  • Assisted with senior engineers in designing digital and analog circuits in a chip.
  • Worked with chip team to successfully integrate analog IP at chip level.
  • Designed analog & digital circuits to test current vs. voltage signal outputs.
  • Design and analysis of digital and analog circuits for CNC machines.
  • Bench tested multiple semiconductors (both analog and digital parts).
  • Created tests for analog devices by studying Data Sheets for devices.
  • Understand schematics & layouts of Analog & Digital circuits.
  • Tested and analyzed analog circuits - Developed quality control process - Designed and programed testing device.
  • Integrated linear potentiometers by reading the analog to digital converter values.
  • Developed microcontroller firmware for controlling various sensors, motors, and analog-to-digital converters for use in automated poultry treatment machinery.
  • Performed Spice simulations of comparators involving integrators and analog filters.
  • Simulate analog circuits with LTSpice or MultiSIM and simulation of Verilog written code on ModelSim.

Show More

13. Electrical Engineer Intern

high Demand
Here's how Electrical Engineer Intern is used in Electrical Engineer Internship jobs:
  • Worked at Miller Welding Automation an ITW Company as an Electrical Engineer Intern in Carol Stream, IL.
  • Worked as Electrical engineer intern in Operations and Maintenance Dept.

Show More

14. Test Cases

high Demand
Here's how Test Cases is used in Electrical Engineer Internship jobs:
  • Updated the test cases and re-verified the same.
  • Prepared user test cases for the advisory board to test different functionalities on the ADMS testbed.
  • Created verification and validation matrices through stress test cases simulating normal operation and fault conditions.
  • Developed test cases for coverage closure.
  • Developed test cases used for locomotives for government-funded projects dealing with PTC (Positive Train Control).
  • Based on new features, create test plans and, write test cases to validate functionality.

Show More

15. Circuit Breakers

average Demand
Here's how Circuit Breakers is used in Electrical Engineer Internship jobs:
  • Gained in depth knowledge about various components in a substation such as power transformers, current transformers, circuit breakers etc
  • Worked on different levels of Circuit Breakers and calculated their operation times when the fault occurs which increased efficiency.
  • Performed tests on Low and High Voltage circuit breakers using primary and secondary current injection test sets.
  • Worked with transformers, circuit breakers, different types of cables and different shapes of electrical towers.
  • Assessed, troubleshot, serviced, and retrofitted circuit breakers of a variety of brands and ratings.
  • Worked with an Electrical Engineer to draft Form Fit and Function letters for obsolete circuit breakers.
  • Replaced faulty circuit breakers, fuses, switches, electrical and electronic components, or wire.
  • Developed knowledge on various power system protection equipment like relays, circuit breakers and troubleshooting them.
  • Performed various studies on circuit breakers, switch gears and operations of SF6 circuit breakers.
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Created virtual conditions using graphical programming in LabVIEW for testing of Air Circuit Breakers.
  • Performed preventive maintenance and refurbishment on 15kV Fuji circuit breakers.
  • Installed lighting, electrical outlets, and circuit breakers.
  • Assembled Vacuum Circuit Breakers and performed associated tests.
  • Study of circuit breakers and relays.
  • Performed detailed status assessment of all transformers and circuit breakers on Gainesville Regional Utilities transmission system.
  • Monitor hotlines and circuit breakers functionality, and electric power switching.
  • circuit breakers, capacitors, VFD's and motor starters
  • Replaced circuit breakers and solar inverters.
  • Designed schematics and wired high-voltage products (switchgear, generator circuit breakers

Show More

16. C++

average Demand
Here's how C++ is used in Electrical Engineer Internship jobs:
  • Modified Visual C++ and GPIB based RF Lab Test bench software to add new test tools.
  • Assisted with C++ content development for a program that analyzes the data packet received from apps.
  • Developed C++ based firmware level software test utilities to track cell and frame loss.
  • Programmed robot in multiple languages, including LabVIEW, MATLAB, and C++.
  • Involved in building test framework and test automation using C and C++.
  • Assisted in developing human physiology engine in C++ for Applied Research Associates.
  • Implemented test plan by creating automated C++ programs and by manual testing.
  • Programmed C++ to control and track an electric motor rotation step.
  • Converted programs written in C++ to Visual Basic 6.
  • Performed firmware programming on MSP430F2xx Processor using C/C++ programming.
  • Applied EigenFace algorithm in C++ based on OpenCV library.
  • Image processing coursework with projects using OpenCV C++.
  • Write test routines in C++ and Visual Basic.
  • Created simulations using MATLAB and C++ programs.
  • Constructed mobile phone shelters using C++ software.
  • Programmed in C and C++ on UNIX Machines.
  • Programmed in C and C++.
  • Learned to use C++, and Labview to control Testing instruments such as frequency spectrometer and Precision power supplies using RS-232.
  • Developed data parsing scripts to compress results along with converting C++ header files into hyperlinked easy to use manuals.
  • Implemented and Integrated ECG waveforms C/C++ model into SystemVerilog for implantable ultra-low-power SoC IC.

Show More

17. HMI

average Demand
Here's how HMI is used in Electrical Engineer Internship jobs:
  • Developed control ladder logic software and HMI user interface applications.
  • Programmed HMI for controlling process externally using FactoryTalk View.
  • Designed process improvements using FactoryTalk for operator HMI panels.
  • Worked closely with designing team to create PLC and HMI system for the client as per their requirement.
  • Interfaced and programmed a welding control system with an HMI for Projection welding on shell lug welders.
  • Programmed HMI monitor to allow operator to select different flow rates and select Nitrogen or Argon gas.
  • Helped create new HMI interfaces, updated old HMI interfaces, and did minor programming.
  • Test, simulate, and troubleshoot all control panel and PLC/HMI functions prior to shipment.
  • Developed the HMI such that the handling technicians can easily understand and operate the machine.
  • Use Ladder Logic programming to make the PLC and HMI functional within specs.
  • Programmed ladder logic code for Allen-Bradley Rockwell PLC and designed touchscreen HMI.
  • Redesigned HMI interface for all HMI product lines (Eaton).
  • Provide PLC and HMI programming support for machine improvements and modifications.
  • Redesigned controls to give operator precise control and feedback via HMI.
  • Added buttons and indicators to HMI screens for new manufacturing modes.
  • Work in Cascade database and with a SCADA HMI.
  • Programmed the Siemens HMI with the WinCC Flexible platform.
  • Assisted in programming new HMI's for installation.
  • Design custom HMI applications for industrial touch screens.
  • Charged with transferring newer HMI's/programs with older ones.

Show More

18. High Voltage

average Demand
Here's how High Voltage is used in Electrical Engineer Internship jobs:
  • Learned about high voltage/ high current electrical substation work safety procedures.
  • Traced faults in High Voltage underground transmission cables and traced underground power cables to prevent damages during excavation.
  • Designed layout of high voltage circuits, low power, differential circuits and high speed digital designs.
  • Team member in Electrical Distribution and Controls group which designed and tested high voltage power controls.
  • Worked in test, testing high voltage, high current and high power test systems.
  • Designed Mock Stand for visual placement of equipment for adequate clearance of high voltage lines.
  • Characterized the breakdown at high voltage of a MEMS switch and proposed design improvements.
  • Learned and gained experience on how to safely work with high voltage systems.
  • Tested, maintained, and retrofitted medium and high voltage industrial power systems.
  • Learned the proper grounding techniques for dealing with high voltage power lines.
  • Installed receptacle and lighting Received hands-on training in high voltage wiring.
  • Design, testing and maintenance of High Voltage Train Lighting Generators.
  • Completed prototype circuit board for IGBT High Voltage Transformer.
  • Maintained 4160 High Voltage and communication cables while mining.
  • Created assembly instructions for High Voltage power supplies.
  • Assembled electronic circuit parts for High Voltage Transformer.
  • Cleaned and maintained high voltage breakers.
  • Assessed operations to improve reliability of high voltage power distribution equipment and switchgear.
  • Led team of electrical technicians during regular maintenance on high voltage equipment Designed, read and followed both schematics and blue prints
  • Design of new SOP procedures as well as user manuals for operating instructions for equipment.Weld Bus High Voltage Labeling.

Show More

19. NEC

average Demand
Here's how NEC is used in Electrical Engineer Internship jobs:
  • Administered necessary experimental documentation for product development.
  • Demonstrated excellent organization abilities by updating an aging part system, cutting down on the expenses of unnecessary component purchases.
  • Scheduled meetings between departments to provide an opportunity for engineers and manufacturers to clear up any disconnects.
  • Review existing electrical engineering criteria to identify necessary revisions, deletions, or amendments to outdated material.
  • Designed a Wall Partition Interface to intelligently route switch connections based upon sensing wall partition position.
  • Participated in meetings with internal and external stakeholders to coordinate with various interconnection study results.
  • Performed engineering tests and acquired all necessary data to validate engineering units and testing equipment.
  • Conducted wiring test using energy analyzer and recommended necessary replacement based on circuit knowledge.
  • Performed piping flexibility analysis on plant piping network connecting static and rotating equipment.
  • Provided all necessary electrical support to manufacturing operations for pharmaceutical product production.
  • Assisted project managers with installation and troubleshooting of Ethernet connections.
  • Researched necessary industry standards via database and contacting relevant specialists.
  • Examined electrical units for loose connections and broken insulation.
  • Designed and performed feasibility tests involving Bluetooth connectivity.
  • Worked on Connectivity systems for electrical vehicles.
  • Conducted torque testing for electrical connectors.
  • Ensured stable BLE connection and reduced buffer delay by using task schedule based on OSAL (Operating System Abstraction Layer).
  • Managed the operation of all treatment equipment and performed tests and made necessary adjustment to keep the system working properly.
  • Developed project start-up and commission plan for installation of pump, motor starter, and disconnect switch at pump station.
  • Gained skills in computer networking, LAN, connecting and testing fiber optics, switches, wireless routers, etc.

Show More

20. Circuit Design

average Demand
Here's how Circuit Design is used in Electrical Engineer Internship jobs:
  • Developed problem-solving skills, specifically analyzing circuit design and insulation flaws in a circuit.
  • Designed and validated circuit designs for temperature stabilizers and power supplies using Electronic Workbench.
  • Conducted laboratory testing of circuit designs in various phases of development.
  • Circuit design & firmware development for helicopter turret searchlight controller.
  • Developed various basic engineering skills - circuit design, troubleshooting, conformance testing, and product development.
  • Learned Unix Systems Administration, GPS engine usage, circuit design, and power supply testing.
  • Tested and characterized a circuit designed to limit input current to one of new products.
  • Performed SMT soldering in the construction, repair, or modification of circuit designs.
  • Circuit design, implementation and testing for a 14V signal gun power supply.
  • Reviewed substation/circuit designs and schematics, checking for errors and discussing possible fixes.
  • Improved efficiency of current circuit design based on tested results.
  • Circuit design to replace mechanical processes for engine testing.
  • Solved basic circuit design issues for various projects.
  • Tested and Improved circuit design for Marx Generator
  • Assisted senior level engineers in circuit designs.
  • Supported the project team in circuit design.
  • Assembled and tested prototype analog and digital circuit designs for uninterruptible power supplies
  • Worked on various steps of prototyping including circuit design, ordering parts from Digikey, and building test circuits.
  • Checked for potential problem in logic diagrams based on circuit design experience and greatly improved the design efficiency.
  • Tested existing control systems and aided in new circuit design Analyzed and fixed problems on existing circuits

Show More

21. Arc Flash

average Demand
Here's how Arc Flash is used in Electrical Engineer Internship jobs:
  • Mill Power/Arc Flash Study: Included an in-depth collection of mill power system data for power flow simulation in Easy Power.
  • Reviewed and studied power studies reports combining short circuit analysis, harmonic analysis, arc flash studies and time-current coordination results.
  • Updated electrical safety training materials for power plant personnel including Arc Flash and MCC hazards based upon NFPA 70E standards.
  • Utilized field gathered data to conduct Arc Flash Study and analysis utilizing SKM software in accordance with NFPA 70E.
  • Created forms in Excel to make the Voltage Drop, Short Circuit, and Arc Flash calculations easier and faster
  • Assist engineers in power system coordination and arc flash studies using power system modeling software (SKM).
  • Assist Engineers in data collection, power system metering, and arc flash labeling at customer sites.
  • Assisted in conducting Arc flash inspection for all motor control centers alongside a Professional Engineer.
  • Performed Arc Flash Studies and made a report on incident energy at different voltage levels.
  • Conduct electrical tours around campus and record entry data for arc flashes and new projects.
  • Calculated arc flash hazard on over 70 medium voltage sub stations for risk categories.
  • Oversee arc flash training, pertaining to the quality of a newly implemented course.
  • Analyzed Arc Flash with SKM power tool for power system protection in various cases
  • Optimized protection to reduce arc flash potential, labeling as per NFPA 70E.
  • Evaluated facility arc flash compliance with IEEE, OSHA and NFPA standards.
  • Proposed future electrical system improvement projects for safety and ARC Flash concerns.
  • Organized and planned an Arc Flash Analysis for the entire mill.
  • Assisted and carried out arc flash studies using SKM Power Tools.
  • Performed calculations for lighting, power, and arc flash.
  • Perform Arc Flash Analysis of the factory's electrical system.

Show More

22. Data Acquisition

average Demand
Here's how Data Acquisition is used in Electrical Engineer Internship jobs:
  • Developed embedded control and data acquisition software for control and analysis of acoustic sensor suites.
  • Implemented embedded software architecture of low power and memory on remote data acquisition systems.
  • Assisted with development of statistical analysis software for a new data acquisition system.
  • Developed a supervisory control and data acquisition (SCADA) program using LabView to collect voltage and current values.
  • Compiled reports in MS Office Excel, Word, and data acquisition and analyzing software (AXUM).
  • Contracted to build a frequency input module to read these signals into their existing data acquisition system.
  • Conducted an intensive life cycle test and data acquisition of a prototype Battery Powered Control.
  • Improved data acquisition skills working with plant PLC's.
  • Participated in the development of a professional maintenance program for steel finishing plant Created visual data acquisition templates for several processes
  • Developed data acquisition tests and procedures for multi-physics ProCAST software to increase accuracy during simulation of the metal casting process
  • Conducted analysis through LabVIEW data acquisition and control programming using NI USB-6351 X-Series DAQ.
  • Programmed the control on C2000 microcontrollers and carried out outdoor/endurance tests, assessed data using NI data acquisition system.
  • Designed 3 reverse-engineering platforms using Labview Data Acquisition (DAq) toolsets.

Show More

23. AC

average Demand
Here's how AC is used in Electrical Engineer Internship jobs:
  • Developed a test interval optimization study for unit maintenance by analyzing a database of safety critical instrumentation to identify bad actors.
  • Increased accuracy of sonar test results including utilization of live subjects to establish baseline on human body and swimmer detection system.
  • Assembled and soldered surface-mount and through-hole components to prototype products permitting the testing and ultimate on-time completion of production projects.
  • Generated top-level specifications for hardware implementation of electrical power subsystems for satellites and payloads contracted by US military and NASA.
  • Worked with third party company to validate and implement data acquisition system for alternator testing which automatically generated customer test reports
  • Worked closely with digital controls system engineer, providing engineering for large scale digital controls systems in a manufacturing environment.
  • Analyze energy considerations and apply energy conservation measures in electrical systems without sacrificing reliability or comfort of the facility.
  • Provided solution for replacing obsolete parts and component selection of legacy products with consideration of aerospace and military standards.
  • Performed load studies on natural gas storage facility to justify generation of electrical power in parallel with utility company.
  • Interfaced with customer engineers as primary technical contact/liaison concerning development progress updates and promoted Delphi Mini-B Cable.
  • Assembled experimental circuitry and prototype models, requiring surface mount soldering of miniature electrical components and cable.
  • Design facilities infrastructure and power system controls for high profile federal, institutional and commercial customers.
  • Presented daily project update at engineering team morning meeting; delivered data/facts/analysis/overruns/issues and recommendations for resolution.
  • Observed company presentations and job site debriefings to provide feedback and inherit presentation giving assets.
  • Preformed electrical acceptance testing of completed hardware, including continuity and high potential isolation testing.
  • Collaborated with the Senior Team Members in designing the schematic layouts and accomplished assigned responsibilities.
  • Collaborated with senior engineers to acquire specifications and perfect the functionality of all automated tests.
  • Developed and implemented PC-based data acquisition systems for research products and existing production lines.
  • Assessed engineering schematics to accomplish safety design criteria and provide recommendations on their approval.
  • Developed analog and digital filtering circuitry and firmware for engine control and data acquisition systems

Show More

24. Altium

average Demand
Here's how Altium is used in Electrical Engineer Internship jobs:
  • Collaborated with experienced engineers in designing electrical schematics with Altium Designer.
  • Verified computational approach from HFSS and ADS with the fabricated PIFA model designed in Altium.
  • Designed Power over Ethernet (POE) circuit using Altium Designer for Gateways.
  • Performed schematic capture in Altium Designer for prototype circuit boards.
  • Edited cable schematics in Altium prior to physically building cables.
  • Designed and verified production ready circuit boards using Altium Designer.
  • Designed footprints and symbols for components in Altium.
  • Used MP Lab X IDE and Altium extensively.
  • Designed and Improved circuits using Altium Design Software.
  • Developed schematics and layouts in Altium.
  • Supported electronic technical support on schematics check using Altium Designer Simulated and conducted circuit schematics test using Multisim Assembled parts of products
  • Designed printed circuit boards in Altium Designer 14 Program in C for Psoc Creator 3.0 Solder surface-mount components Attended professional seminars

Show More

25. Python

average Demand
Here's how Python is used in Electrical Engineer Internship jobs:
  • Developed Python applications for hardware integrated test fixtures, and automated hardware validation.
  • Worked on data erasing techniques for different mobile phones, testing and time studies, testing on software which used python.
  • Worked on lighting sensor node with the software engineer to gain exposure in Embedded C and Python.
  • Developed interface program in Python to transfer sensor data from Bluetooth module to mobile cell phone.
  • Designed and developed revolutionary motion control profile using python, and implementing the motion to PLC.
  • Used Python 3.6 programming language to form a plot generator for analysis of their EAF.
  • Create algorithm using Python programming software which obtain a successful reading of the material.
  • Formulated a Python interface to a CubeSat radio and a ground software designed radio.
  • Developed a minimal viable version of Python Editor for Multi-Stage Turbine and Compressor Analysis.
  • Based on CAN, implement the automatic installation verification of PV system using Python.
  • Developed python scripts to assist in the data collection of prototype designs.
  • Designed and programmed lab instrument drivers in Python for automation testing.
  • Developed Python scripts for Raspberry Pi to streamline battery usage.
  • Used Snappy Scripting (subset of python).
  • Created Python control script and resistive load fixture to simulate and test electrical load of a field product.
  • Gained hands on experience on Verilog, Object oriented programming, C and Python during the internship.
  • Used Python and C++ to program functions onto a TurtleBot 2 robot.
  • Designed and programmed a Python-based Modbus simulator for Netbiter Argos data center.
  • Lined up crude for shipment and prepared technical report.HIGHLIGHTS/SKILLS Programming: Matlab, Python, LabVIEW and Cosmol Multiphysics.

Show More

26. Troubleshot

average Demand
Here's how Troubleshot is used in Electrical Engineer Internship jobs:
  • Utilized electronic equipment to test company products and troubleshot problems with machinery.
  • Developed, tested, troubleshot, and documented the software used to control the sorting machine.
  • Wired, troubleshot, reversed, and tested 480 Volt 3-Phase motors.
  • Monitored the machine status as well as troubleshot whenever needed.
  • Designed, analyzed, and troubleshot LER powerhouses.
  • Installed and troubleshot transmitters, switches and valves.
  • Designed tests for and troubleshot imager engines and products, as well as PC boards with design schematics.
  • Tested, troubleshot, and repaired process products and subassemblies.

Show More

27. R

average Demand
Here's how R is used in Electrical Engineer Internship jobs:
  • Developed a better understanding of LEED certified jobs, electrical engineering and the technology side of electrical engineering.
  • Maintained constant vigilance to site safety by noticing unsafe behaviors and always seeking advice from site safety supervisor.
  • Developed a wide band TV signal distribution system for measuring inter-modulation products in wide-band dual conversion tuners.
  • Generated field reports of technical analysis, quality check analysis, help manuals and other documentation.
  • Reprogrammed and reconfigured electrical meters throughout the campus to gather and analyze relevant data points.
  • Collaborated with a software engineer to develop an algorithm to simplify data entry into databases.
  • Reviewed and revised control algorithms and hardware used in natural gas engine/compressor automation projects.
  • Prepared summaries and engineering reports for the certification of recently completed aircraft.
  • Completed unit power shutdown and start-up procedures including power outage risk assessment.
  • Monitored the electrical devices and operations to ensure compliance with safety protocols.
  • Assisted with product testing while ensuring ISO requirements and meeting customer specification.
  • Produced documentation on creating visual applications for automatic code generation through MATLAB.
  • Supervised different field operations including emergency call of high voltage drop.
  • Assemble electrical/electronic and mechanical systems using hand tools and measuring instruments.
  • Participated in developing and executing test plans and processing prototype builds.
  • Recommended improvements to existing products and provided technical assistance to customers.
  • Conducted protection relay and end-to-end testing at different substations.
  • Assisted with identifying and analyzing problems with electrical equipment.
  • Designed lighting and power distribution systems for commercial buildings.
  • Assisted in lighting calculations using Visual Professional Lighting Software.

Show More

28. Fpga

average Demand
Here's how Fpga is used in Electrical Engineer Internship jobs:
  • Inspected installation and performed PLC component operation analysis with engineers using FPGA based units.
  • Worked on individual research project Schematic and FPGA design for radio transceiver board Finished working prototypes in under 3 months
  • Designed the schematics of the board for their test circuitry for high speed DAC's and FPGA.
  • Designed and simulated an FPGA-based system for the directional detection of blood flow on coronary implants.
  • Programmed FPGA to provide user interface and drive test patterns on the tile under test.
  • Developed battleship game using GAL3320 chip interfaced with the cyclone II FPGA.
  • Gained hands-on experience on general purpose I/O for FPGA.
  • Implemented the design on FPGA using XILINX software.
  • Performed power measurements for FPGA designs.
  • Performed debugging of FPGA logic using chipscope/oscilloscopes.
  • Support design efforts that incorporate embedded microcontrollers and programmable logic such as FPGA and CPLD devices (VHDL coding).
  • Formulated VHDL and Verilog code as per the requirements with behavioral simulation check and implemented in FPGA board.
  • Converted SEM data to digital data and performed image processing using Quartus (FPGA board).
  • Worked on activities related to bring-up of new FPGA based PCAs.
  • Programmed FPGAs on digital audio cards for communication systems.
  • Designed a FPGA neuromorphic processing system from beginning to end in Verilog for ultra-low power, high throughput processing.
  • Assisted with developing Verilog firmware for a Spartan-6 FPGA board for controlling high-voltage functions of generators.
  • Developed HiDRA communications system using Xilinx FPGA's Ran Phase A testing on HiDRA system
  • implemented in FPGA using VHDL and MPLAB installation for developing Embedded C program.
  • Installed embedded Linux on the laboratory's Xilinx Virtex V FPGA boards.

Show More

29. One-Line Diagrams

average Demand
Here's how One-Line Diagrams is used in Electrical Engineer Internship jobs:
  • Analyzed electrical one-line diagrams and elementary drawings used to troubleshoot equipment.
  • Update and create electrical drawings such as, motor schematics, one-line diagrams, and related drawings as needed.
  • Designed low voltage motor control center one-line diagrams for cooling tower and water treatment building.
  • Used PTW32, a power analysis program for one-line diagrams and power studies.
  • Designed & drafted Specification Sheets and One-line diagrams as per consumer requirements.
  • Created electrical, one-line diagrams for the plant.
  • Assisted with supervising a turnaround and planned future turnarounds - Updated one-line diagrams after the turnaround to ensure accuracy.
  • Constructed building-wide one-line diagrams by means of field work in order to consolidate information for Short Circuit Studies.
  • Assisted with supervising a turnaround and planned future turnarounds including shutdown - Updated and corrected one-line diagrams.
  • Updated feeder database for 15kV and 230kV cables using system one-line diagrams and cable feeder datasheets.
  • Design of transformers, panelboards, and one-line diagrams.

Show More

30. Revit

low Demand
Here's how Revit is used in Electrical Engineer Internship jobs:
  • Operate computer-assisted engineering and design software such as AutoCAD, Revit and AGI Lighting to perform engineering tasks.
  • Worked with AutoCAD and Revit software in order to draw and design electrical outlets for government.
  • Produced layouts of lighting, power, and fire alarm set ups using Revit and AutoCAD.
  • Designed with current up-to-date versions of Revit and AutoCAD MEP.
  • Assisted co-workers on various projects mainly utilizing Revit and AutoCAD.
  • Develop and update project drawings using AutoCAD and Revit.
  • Modeled power and lighting equipment using Autodesk Revit.
  • Assist with design of power and lighting systems in accordance with state law Create drawings using Revit and AutoCAD
  • Updated construction changes (conduits and receptacles) on blueprints for Chicago Hospital renovation using AutoCAD Electrical and Revit !
  • Initiated independent learning of Revit design software to become the "Revit Guru."

Show More

31. Electrical Design

low Demand
Here's how Electrical Design is used in Electrical Engineer Internship jobs:
  • Collaborated with senior engineers in electrical design for various projects.
  • Worked with a team of professional engineers on electrical design and project management of various airport and highway lighting projects.
  • Worked closely with the Senior Engineer and electrical designers to develop new approaches to problems presented by the client.
  • Contributed to the electrical design process of the various motion and rate tables that were built by the company.
  • Collaborated with senior engineers in electrical design for various projects and experienced on job field training at sites.
  • Collaborated as part of an electrical design team in conjunction with a mechanical engineering team.
  • Experience working on power lighting, distribution, and electrical design projects.
  • Created Electrical Design Criteria Specifications that will be used at PCS.
  • Worked with the electrical design of three different waste-water treatment plants.
  • Assisted in mechanical and electrical design of system.
  • Worked on drafting various electrical design drawings and generating project report documents regarding procurementand construction documents.
  • Created, revised, and communicated electrical designs for construction projects with heavy use of AutoCAD and Revit Software.
  • Developed electrical designs for the $1.3 billion New Meadowlands (Giants/Jets) Stadium project.
  • Captured schematics for various electrical designs in Mentor Graphics [ ]
  • Assist in electrical design for retail projects using Microstation.
  • Created electrical designs for residential developments in Auto CAD including: Multi-family building electrical plans and arrangements.

Show More

32. Vhdl

low Demand
Here's how Vhdl is used in Electrical Engineer Internship jobs:
  • Design of Digital systems: VHDL code implementation of a simple processor capable of calculations and playing pong.
  • Produced a bit error rate test in VHDL to simulate impairments in the transmission link.
  • Designed high speed digital hardware systems and simulation with ModelSim in VHDL.
  • Acquired experience in digital design, VHDL- hardware design with Xilinx, ISE tools.
  • Created C files and tested the functionality of generated Verilog and VHDL.

Show More

33. BOM

low Demand
Here's how BOM is used in Electrical Engineer Internship jobs:
  • Alarm system design for explosion-proof server building (charter, quotes, BOM, drawings, programming, etc.)
  • Design Test load for system and create Billing of Materials (BOM) needed to build the test load.
  • Created/Revised engineering drawings, bill of materials (BOM), parts lists, orders, and diagrams/schematics.
  • Prepared electrical schematics, panel layout drawings, BOM, test criteria and critical assembly instructions.
  • Assisted lead engineer in developing BOM for electrical communications board and sourcing parts from suppliers
  • Experience in preparation of BOM, Estimation & Costing.
  • Maintained BOM's and fabrication orders.
  • Assist the Design Engineer to prepare Bill of Materials (BOM's).
  • Develop parts list/BOMs in compliance with applicable specifications, customer requirements and program compliance matrix.
  • Entered and reviewed PCB and PCA schematics and layouts, as well as PCA BOMs.
  • Researched electronic components and compiled BOMs for several medical and consumer products.
  • Performed QA/QC on wiring diagrams and BOM costing on the 95% deliverables for the Bayou La Loutre vertical lift bridge.
  • Analyzed component parametrics and key design features for suitable BOM replacements Debugged and documented new and existing L-3 circuit boards.

Show More

34. Data Analysis

low Demand
Here's how Data Analysis is used in Electrical Engineer Internship jobs:
  • Design and data analysis of Electrical vehicle charger fed by a hybrid solar/battery energy storage system.
  • Research and propose implementation of smart power meters for plant-wide electricity usage data analysis.
  • Performed data analysis and provided recommendations to achieve Arc Flash Study.
  • Assisted engineers in data analysis of battery material testing projects.
  • Developed research and data analysis skills while developing medical devices
  • Performed data analysis, research on patented documents related to implantable microchips and RFID readers.
  • Assisted the Engine NPI group with locomotive validation testing, including data analysis.
  • Specialized in Ovation Control Builder software and data analysis of HVAC logic systems.
  • Performed data analysis on shower temperature data, water usage using Matlab; built documentations for investments.
  • Helped engineers to test electronic mobile operation Participated in testing and data analysis of fog penetration Cameras
  • Created analysis tools for production arcjet test data analysis and anomaly detection.
  • Developed an automated data analysis program via Matlab for T4 field test data collection, saving hours of manual data processing.
  • Conducted data analysis using Microsoft Excel, writing script in Lua, a C based language for testing purposes.
  • Assisted in Hall Thruster data analysis for a new customer.
  • Support included project management, budgeting, data analysis, field testing, and debugging equipment.

Show More

35. GPS

low Demand
Here's how GPS is used in Electrical Engineer Internship jobs:
  • Performed extensive GPS compass board testing resulting in increased accuracy and efficiency and implementation of the board into new product designs.
  • Trouble shooting of DO-160 MOPS test failures in GPS receiver using a GPS simulator, Noise Generator, and Temperature chambers.
  • Demonstrated a working model for the functioning of a GPS & GSM based public transport management system.
  • Helped the GPS team with the evaluation of GPS performance on the Motorola i876 radio.
  • Designed models for extracting device parameters from MIC transistors for GPS SSPA.
  • Acquired knowledge on Bluetooth, ZigBee, GPS, Sensor modules.
  • Installed GPS systems in company vehicles.
  • Developed and tested a device driver for a GPS/INS unit using the C programming language and GPS Daemon for Linux.
  • Used handheld GPS system to take location data of existing and future fiber optic network for enhanced planning of line placement.
  • Lead projects that incorporated microcontrollers for testing equipment including RFID, GPS (GSM), and ultrasonic distance sensing.
  • Performed various GPS tests, such as measuring radiated desense caused by the LCD backlight and the keypad LEDs.

Show More

37. Pspice

low Demand
Here's how Pspice is used in Electrical Engineer Internship jobs:
  • Utilized PSPICE to draw electrical schematics to aid in the soldering and labeling of the test fixtures.
  • Decreased manufacturing time through simplification of wiring diagrams using Pspice after consultation with assembly manager and individual assemblers.
  • Design, analysis and evaluation of Analog/Digital circuits with voltage transients and temperature constraints using PSpice.
  • Developed alternative Pspice power switching model.
  • Perform Pspice simulations to calculate the voltage and current for a specific part of the circuit in the RF board.
  • Simulate circuit and perform the various analysis by using Pspice.
  • Developed schematics for spray systems using PSpice software.
  • Provide Engineering support to Northrop Grumman and Air Force Programs * Use PSpice to simulate circuits in order to analyze circuit behaviors
  • Helped integrate with Raspberry Pi Skills Used Cadence OrCad and Pspice, Labwindows, Raspberry Pi develoment board
  • Created an updated and more organized schematic database using Autodesk Vault and Orcad Pspice.

Show More

38. Arduino

low Demand
Here's how Arduino is used in Electrical Engineer Internship jobs:
  • Developed embedded C++/Arduino code for robotic system leading to greatly improved functionality.
  • Project: Laser HarpWrote an Arduino code with the team for producing the musical notes via MIDI keyboard.
  • Designed touch screen interface between Arduino and motor to communication via RS232 to schedule event timer task.
  • Utilized arduino control system to control 5 leaf blowers with a joystick.
  • Designed and programmed a quadruped robot based on Arduino using C++.
  • Monitored current supply of the component Arduino display connection.
  • Worked on Arduino and raspberry pi based project.
  • Programmed Arduino microcontrollers to integrate each axis as well as the camera used for film location and selection.
  • Programmed a microcontroller using Arduino for a gaming device to work with the prior created game.
  • Recommended open source Arduino UNO for its low power usage, robustness and reprogrammable properties.
  • Project: Engine Simulator Designed a simple engine simulator using Arduino and CAN bus shield.
  • Designed and built an Arduino data logger and 3kW stator for wind turbine.
  • Executed the Programming of the Microcontrollers using Arduino Software.
  • Work with Arduino, Raspberry Pi, cc26xx, Cc32xx.Firmware development on Arduino IDE/CC Studio(TI-RTOS).
  • Stripped down an Arduino microcontroller to a bare bones system and used components of the microcontroller in our Bio Commander System.
  • Developed an automation using atmel microcontrollers, Arduino, Iot boards.

Show More

39. Orcad

low Demand
Here's how Orcad is used in Electrical Engineer Internship jobs:
  • Designed Electrical Circuit schematics in Cadence OrCAD Capture.
  • Completed OrCad software training class.
  • Draw and improved schematics of control boxes using software OrCAD by Cadence Performed Analysis of Thermocouples i.
  • Co-developed and produced Generic OpenBus and Differential Buffer interfaces using OrCAD design tools.
  • Used ORCAD Capture to draw the design schematics.
  • Captured and cleaned schematics using OrCAD.

Show More

40. Engineering Department

low Demand
Here's how Engineering Department is used in Electrical Engineer Internship jobs:
  • Developed relay controls used in Pit Circulation system for Nuclear Refueling Electrical Engineering department.
  • Communicated designs and assemblies between the sales and engineering departments
  • Assisted electrical engineering department with control system design.
  • Assisted the engineering department with design support, development, and documentation for various other tasks/projects.
  • Served in Electrical Engineering Department and worked on various projects that involve IFF Transponders.
  • Hired to provide engineering and technical support to the engineering department.
  • Assisted in the supervising process in the electrical engineering department.
  • Interned with the Engineering department at the Shawnee Fossil Plant.
  • Worked in an Accessories Overhaul Division of Engineering Department.
  • Attended the engineering department meetings.
  • Worked with Project Engineering Department.
  • Involved, productive member of the engineering department Designed building infrastructure systems: Power, Lighting, Fire alarm systems
  • Ranked First in Mechanical Engineering Department at IIT Ropar.
  • Trained in Linde's Business and Engineering departments.

Show More

41. Solidworks

low Demand
Here's how Solidworks is used in Electrical Engineer Internship jobs:
  • Modeled electrical and mechanical components in AutoCAD and SolidWorks for manufacturing.
  • Design Gas Flow Piping & Instrumentation Diagrams (P&ID) using SolidWorks.
  • Designed and developed the 3D model of the mechanical robotic car by using SOLIDWORKS.
  • Constructed CAD drawings in both 2D and 3D using SolidWorks and AutoCAD.
  • Utilize SolidWorks + AutoCAD to design new components and appearance for Instrument.2.
  • Designed, modeled, and constructed multiple LED signage using SolidWorks.
  • Utilized SolidWorks to design machine upgrades with critical clearances.
  • Learned standards in creating electrical schematics using Solidworks Electrical.
  • Designed, implemented, and tested custom parts using Solidworks and various manufacturing methods.
  • Gained much experience using SolidWorks, LabVIEW, and programming microcontrollers.
  • Designed in SOLIDWORKS a machine base for the gearmotor and several chain drives to create resistive torque.

Show More

42. Powerpoint

low Demand
Here's how Powerpoint is used in Electrical Engineer Internship jobs:
  • Delivered formal PowerPoint presentation of results including graphs that are being used in continuing experimentation.
  • Provided step-by-step instruction using PowerPoint for design change to minimize issues during implementation
  • Apply education and experience in developing PowerPoint presentation and in-services.
  • Prepared PowerPoint presentations on tidal hydro power turbines.
  • Prepare presentation slides using PowerPoint for project meetings.
  • Performed experimentation using an oscilloscope, analyzed data using FIR filtering on Excel, and presentedcomprehensive PowerPoints summarizing findings.
  • Streamlined data processing and analysis phase of Antenna Prototyping by developing a robustVBA coded Microsoft Excel and PowerPoint Add-In.
  • Create Bill of Materials, and Microprint books for parts ordering using Word, Excel and PowerPoint.
  • Created and manipulated wire harnesses in CATIA Assisted in the design of new vehicles Provided PowerPoint presentations for various engineers

Show More

43. I/O

low Demand
Here's how I/O is used in Electrical Engineer Internship jobs:
  • Experience in Integration and validation of new product designs and support software QA and optimize I/O performance.
  • Create 3-phase power, control power, I/O schematics and panel layouts using AutoCAD.
  • Constructed electrical drawings for analogue and digital signals to I/O of PLC.
  • Designed and Drafted Remote I/O Panel Cabinet Layouts and Bill of Materials.
  • Applied I2C bus system into a toolbox with hundreds of I/O.
  • Designed and Drafted I/O Elementary Diagrams using AutoCAD 2006.
  • Performed I/O, UART, PWM and SPI control for projects on microcontrollers.
  • Designed portions of the I/O circuit.
  • Completed programs for the PLC, and wired the equipment to the I/O of the PLC cards and terminal blocks.
  • Received training in engineering development process and I/O protocols, such as Foundation Fieldbus, Profibus and others.

Show More

44. Control Panels

low Demand
Here's how Control Panels is used in Electrical Engineer Internship jobs:
  • Constructed control panels and conveyors given electrical and mechanical schematics.
  • Verified and updated Programmable Logic control panels.
  • Worked with shop to make sure control panels were wired correctly coupled with programming customer panels.
  • Designed ESD panel that tied into two existing control panels for a natural gas company.
  • Participated in the design of control panels for water and water waste treatment plant.
  • Design custom control panels and select instruments for each project based on various specifications.
  • Worked with the Maintenance department and quality department of power and control panels.
  • Create and update Bill of Materials for control panels and requisition all required components
  • Helped with multiple robot cells by wiring the PLC control panels.
  • Help wire, program, test, and commission control panels.
  • Programmed control panels for customers' custom applications and needs.
  • Designed custom control panels' physical layouts using AutoCad.
  • Learned to read electrical schematics of the lime plant and the control panels to test and verify the controlpanel's wiring.
  • Conducted on site check for electrical control panels, switches and pipes for corrosions and degradations.

Show More

45. Ieee

low Demand
Here's how Ieee is used in Electrical Engineer Internship jobs:
  • Reviewed thermal modeling and IEEE specifications for analysis of sensor data.
  • Calculated wattage density to verify individual rooms adhered to IEEE and ASHRAE standards.
  • Worked to create Excel programs to calculate parameters to IEEE specifications.
  • Verified compliance of electrical cable designations with IEC and IEEE standards.
  • Assisted engineers, using AutoCAD and Revit, in designing electrical projects, adhering to IEEE and ASHRAE standards.
  • Design IEEE-1394 (firewire) to an existing printer platform.

Show More

46. Failure Analysis

low Demand
Here's how Failure Analysis is used in Electrical Engineer Internship jobs:
  • Conducted component failure analysis, creating extensive documentation and design updates in order to prevent design flaws in future product iterations.
  • Performed failure analysis on high-powered motor controllers, identified areas of weakness and identified areas of improvement.
  • Performed failure analysis and contributed to continuous development of the project.
  • Performed vibration testing and all failure analysis.
  • Conducted failure analysis on existing products.
  • Performed failure analysis on returned products.
  • Studied failure analysis for failed equipment in Rolling department- Dig Permit Documentation system (reduced dig permit searches by hours/days)
  • Participated in New Product Introduction which involves prototype design, debug, failure analysis and design iteration.
  • Used lab bench equipment and schematics to conduct failure analysis on 50+ failed boards
  • Performed Root Cause Failure Analysis on two (2) troublesome extrusion lines.
  • Implemented and ran test scripts to do failure analysis and debug components.
  • Summer 2008 - Summer 2013 Conducted failure analysis for high-voltage machinery used for cryogenic gas distillation.
  • Ended Internship with full time offer as Failure Analysis Engineer
  • Tickle Me Elmo and Laugh & Learn Puppy prototype testing and audio circuit failure analysis, new product development.
  • Performed tests on pre-released version of Micro Inverters and Gateway Products Generated failure analysis reports, RF reports, etc.

Show More

47. Hvac

low Demand
Here's how Hvac is used in Electrical Engineer Internship jobs:
  • Worked on a variety of projects culminating in the design of an HVAC user interface for automotive up-fitters.
  • Developed an RS-485 communication protocol HVAC user interface could probe and adjust control unit settings.
  • Designed hardware and firmware for HVAC user interface project.
  • Provide design for powering of all HVAC equipment.
  • Reviewed and initiated inspection of HVAC system.
  • Conducted general maintenance of HVAC including ventilation and ductwork.
  • Assessed HVAC microcontrollers and authored procedural refueling manuals.

Show More

48. Verilog

low Demand
Here's how Verilog is used in Electrical Engineer Internship jobs:
  • Performed self-functional and timing verification using QuataSim in System Verilog HDL.
  • Programmed using Verilog which implemented the system mechanism.
  • Designed logic blocks to perform different functions in a telemetry sub sections (ASIC) of a missile in Verilog HDL.
  • Worked on the Modular Systems team programming a board in Verilog to be used in a greater system.
  • Performed pre-silicon verification at full chip level using UVM and System Verilog.

Show More

49. Etap

low Demand
Here's how Etap is used in Electrical Engineer Internship jobs:
  • Formulated Time Current Curves in ETAP to verify if SEL-751 Relay settings would effectively protect electrical equipment.
  • Designed a protection scheme, performed relay co-ordination studies using ETAP and prepared single line diagrams.
  • Assisted in voltage drop calculations and load flow calculations using ETAP 7.5.1 software.
  • Set up medium-high voltage systems in ETAP for engineer.
  • Simulated protection system of GIS on ETAP.
  • Simulated power systems (ETAP) * Compiled project management material, drafted proposals
  • Attached storage from NetAPP through virtualization, updated VMWare tools as well as conducting server updates and domain additions.

Show More

50. GUI

low Demand
Here's how GUI is used in Electrical Engineer Internship jobs:
  • Developed a comprehensive reference for guidance on the configuration, operation, and troubleshooting of data acquisition board.
  • Developed relay demonstration and familiarization guide which described what would cause turbine trips to plant operators.
  • Implemented and approved design control procedures for electrical development in accordance with DOE guidelines.
  • Created product design guide for company products using their technical specifications.
  • Guided students in exploring campus resources and provided practical academic counseling
  • Provided guidance and direction to contractor personnel and monitored progress.
  • Developed condensed instructional guide for using calibration software.
  • Developed a GUI using TCL (Tool Command Language) to automate the library back end development in the Linux environment.
  • Assisted a team of 5 installing 3 Pedestrian HAWK system lights: handing tools, guiding poles, signaling.
  • Performed guided QA/QC on low voltage systems for oil and natural gas compression stations in Wyoming and Utah.
  • Designed graphical models/GUI & front-panels using LabVIEW for controlling and monitoring the well stimulation process in real-time.
  • Developed Visual Basic GUI to remotely control and monitor oil wells and facilities to meet engineering needs.
  • Designed three 65kW PV systems in Diego Garcia for multiple roofs, following GSA fire safety guidelines.
  • Specified and supervised layout of prototype PCB via hired layout service, with senior engineer guidance.
  • Tested and provided feedback for a new proprietary GUI based application system the company developed.
  • Tested CT scanner guide wheels for electrostatic discharge, worked with group to find solutions.
  • Automated and developed a GUI for settings of relays Schweitzer (SEL-451) using VB.NET.
  • Performed radiation testing and analysis of spacecraft guidance systems and prepared test report of results.
  • Assisted developing and checking critical plant system designs under the guidance of senior engineers.
  • Used MATLAB to build an interactive GUI that allows users to correct radar data.

Show More

20 Most Common Skill for an Electrical Engineer Internship

Electrical Systems16.2%
Autocad Electrical12.9%
PCB8.6%
PLC8.5%
CAD5.6%
Circuit Boards5.3%
Ladder Logic5.2%
Control Systems5.1%

Typical Skill-Sets Required For An Electrical Engineer Internship

RankSkillPercentage of ResumesPercentage
1
1
Electrical Systems
Electrical Systems
11.7%
11.7%
2
2
Autocad Electrical
Autocad Electrical
9.3%
9.3%
3
3
PCB
PCB
6.2%
6.2%
4
4
PLC
PLC
6.1%
6.1%
5
5
CAD
CAD
4%
4%
6
6
Circuit Boards
Circuit Boards
3.8%
3.8%
7
7
Ladder Logic
Ladder Logic
3.7%
3.7%
8
8
Control Systems
Control Systems
3.7%
3.7%
9
9
Test Procedures
Test Procedures
3.2%
3.2%
10
10
Troubleshoot
Troubleshoot
2.4%
2.4%
11
11
Labview
Labview
2.1%
2.1%
12
12
Analog
Analog
2%
2%
13
13
Electrical Engineer Intern
Electrical Engineer Intern
2%
2%
14
14
Test Cases
Test Cases
2%
2%
15
15
Circuit Breakers
Circuit Breakers
1.9%
1.9%
16
16
C++
C++
1.9%
1.9%
17
17
HMI
HMI
1.9%
1.9%
18
18
High Voltage
High Voltage
1.5%
1.5%
19
19
NEC
NEC
1.4%
1.4%
20
20
Circuit Design
Circuit Design
1.4%
1.4%
21
21
Arc Flash
Arc Flash
1.4%
1.4%
22
22
Data Acquisition
Data Acquisition
1.3%
1.3%
23
23
AC
AC
1.3%
1.3%
24
24
Altium
Altium
1.3%
1.3%
25
25
Python
Python
1.2%
1.2%
26
26
Troubleshot
Troubleshot
1.2%
1.2%
27
27
R
R
1.2%
1.2%
28
28
Fpga
Fpga
1.1%
1.1%
29
29
One-Line Diagrams
One-Line Diagrams
1.1%
1.1%
30
30
Revit
Revit
1.1%
1.1%
31
31
Electrical Design
Electrical Design
1.1%
1.1%
32
32
Vhdl
Vhdl
1%
1%
33
33
BOM
BOM
0.9%
0.9%
34
34
Data Analysis
Data Analysis
0.9%
0.9%
35
35
GPS
GPS
0.8%
0.8%
36
36
Simulink
Simulink
0.8%
0.8%
37
37
Pspice
Pspice
0.8%
0.8%
38
38
Arduino
Arduino
0.8%
0.8%
39
39
Orcad
Orcad
0.8%
0.8%
40
40
Engineering Department
Engineering Department
0.8%
0.8%
41
41
Solidworks
Solidworks
0.8%
0.8%
42
42
Powerpoint
Powerpoint
0.8%
0.8%
43
43
I/O
I/O
0.8%
0.8%
44
44
Control Panels
Control Panels
0.8%
0.8%
45
45
Ieee
Ieee
0.7%
0.7%
46
46
Failure Analysis
Failure Analysis
0.7%
0.7%
47
47
Hvac
Hvac
0.7%
0.7%
48
48
Verilog
Verilog
0.7%
0.7%
49
49
Etap
Etap
0.6%
0.6%
50
50
GUI
GUI
0.6%
0.6%

20,413 Electrical Engineer Internship Jobs

Where do you want to work?