Electrical engineer internship jobs in Long Beach, CA

Job Title : Hardware Engineer Duration : 6+ Months Pay Rate: $45.95 - 47.60/HR On W2 The Hardware Engineer Temp will have a minimum of 3+ years of electronic circuits and systems design, integration and testing experience. Knowledge of RF systems or motor drives and controls is desirable. Experience with the use of test equipment, such as oscilloscope, spectrum analyzer, network analyzer, DMMs, and signal generators. Knowledge of project engineering methods and troubleshooting techniques for electronic circuitry. Knowledge of test report and procedure generation. Familiar with one or more of the following: OrCAD, MATLAB, LabView, and/or VHDL. ESSENTIAL DUTIES & RESPONSIBILITIES Must have training with one or more of the following: Digital Signal Processing (DSP), RF Circuit Design Analog Circuit Design, Digital Electronics Design FPGA Design, Algorithm Development (Pattern Recognition and Object Tracking) LabView Automated Test Stand Design EDUCATION AND EXPERIENCE: B.S.E.E. degree from and accredited university or equivalent; and 3+ years related experience and/or training. Masters in Electrical Engineering related field or an MBA is considered a plus. Experience and training in the Military/Aerospace Industry is desirable. Professional and/or technical certifications from accredited educational and vocational institutions desired. LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Ability to communicate in English. Additionally, requires ability to read, analyze, and interpret common scientific journals. Ability to respond to common inquiries or complaints from customers and members from the business community. Ability to write articles for publication. Required to have very good oral and written communications. Should be capable of making presentations to customers. MATHEMATICAL SKILLS: Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. Ability to comprehend and apply principles of advanced calculus and modern algebra. Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

Engineer (Electrical) - Sustainability This position is bond-eligible and is strictly limited to work associated with capital construction, modernization, and sustainability projects. Duties performed under this position shall not include routine maintenance, repair, or operational tasks that fall within the responsibilities of facilities Maintenance & Operations (M&O). The scope of this role is exclusively tied to bond-eligible activities such as planning, design, construction, commissioning, and related project management functions necessary to deliver capital improvements consistent with the organization's requirements and legal limitations governing bond fund expenditures. Position Description: Lead and manage sustainability projects in accordance with District and program policies and procedures for College construction bond operations. Implement the electrification of central plants and other building systems outlined in the Board of Trustees' Clean Energy Resolution passed in July 9, 2020. Apply knowledge of Sustainable Building Principles and Standards to assist with complex systems level issues. Support districtwide energy master planning, carbon reduction, grid resiliency, and electrification initiatives. Apply knowledge of energy and environmental sustainability approaches, such as LEED credits, and its related impacts to operational efficiency. Understand Title 24 and ASHRAE recommendations. Coordinate with multi-disciplinary teams in conjunction with Project Managers, to meet project requirements and timelines. Assist College Project Teams (CPT's) with technical issues that require second opinions i.e. peer review of Request For Clarifications (RFC's), Change Orders, etc. Travelling to and from project sites upon request of attending project and construction meetings. Involvement in all parts of the project life cycle, to include master planning, design, construction, and closeout. Perform electrical engineering analysis and technical reports supporting District design guidelines. Ensure integration of LED lighting systems, PV, BESS, EV charging, microgrids, and smart controls. Perform other related duties as assigned. Minimum Required Qualifications: Bachelor's Degree in in Electrical Engineering. 10 or more years of professional electrical engineering experience in design, construction, or facilities infrastructure projects. Strong knowledge of California Energy Codes, Title 24 Energy Code, National Electrical Code (NEC), California Code of Regulations Part 11 (Cal Green Code) and applicable electrical engineering standards. Preferred Qualifications: 2 years' experience in Educational Facility Construction. Experience and/or certification in Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS). California Professional Engineering (PE) license in Electrical Engineering.

ABOUT THIS JOB: We are currently seeking a Senior Electrical Engineer to join our team in Marina Del Rey, California. SUMMARY: This position is responsible for designing, developing, and testing all aspects of Electrical components, equipment, and machinery. DUTIES AND RESPONSIBILITIES: o Build long-term customer relationships with existing and potential customers. o Manages Electrical design projects by satisfying clients' needs, meeting budget expectations and project schedules. o Provides support during construction phases. o Understands engineering fundamentals and advanced concepts to execute all required aspects of electrical engineering. o Manages a multi project workload as well as oversee the design work of other engineers. The successful candidate will be accountable for project coordination and quality, as well as budget adherence, and overall team communication. o Is responsible for oversight of production team on specific projects. o Leads multi-disciplinary team for mechanically focused projects. o Performs coordination with other disciplines on all projects. o Performs projects within established project budgets and schedules. o Manages work plans and deliverables on multiple projects within budgeted hours. o Performs other related duties as assigned by management. QUALIFICATIONS: o Bachelor's Degree (BA) from four-year college or university in Electrical Engineering, or two to or more years of related experience and/or training, or equivalent combination of education and experience. o Certificates, licenses and registrations required: LEED Certification is a plus. o Computer skills required: Experienced at using a computer, preferably knowledgeable with MS Word, MS Excel, AutoCAD, and REVIT is a plus. Other skills required: o Experience in the following preferred: o Residential / Commercial / Multi-Family / Restaurants o Strong interpersonal skills and experience in maintaining strong client relationships are required. o Ability to communicate effectively with people through oral presentations and written communications. o Ability to motivate multiple-discipline project teams in meeting client's needs in a timely manner and meeting budget objectives. o Must possess strong leadership and communication skills.

Our Summer Internship Program is meticulously designed to provide students with an immersive and dynamic experience within our industry, offering a taste of what it's like to be part of our professional team. We strive to simulate a full-time job, enabling our interns to work hands-on with cutting-edge technology, contribute to meaningful projects, build strong relationships with coworkers, and develop strategic problem-solving skills. Our program is highly selective, hosting only a handful of interns each year, ensuring personalized attention and ample opportunities to work closely with AV team members. We are hiring for various roles and locations throughout the U.S. During the interview process, we will discuss specific details regarding the team and location. Summary As an Electrical Engineering Intern, you'll join AV's Test Equipment Engineering Team and contribute to the design, development, and testing of electrical systems for unmanned aircraft and advanced robotics. You'll assist in building and supporting test equipment, writing software, and troubleshooting systems - gaining valuable, real-world experience across the product development lifecycle. This is an exciting opportunity to apply your academic training in a high-tech, fast-paced environment while working alongside experienced engineers and mentors. Position Responsibilities Assist in the design, development, and troubleshooting of test equipment for printed circuit board assemblies (PCBAs), subsystems, and full systems Help develop and deploy test software to support hardware integration and validation Support the maintenance and upgrade of test systems used during production Participate in test plan creation, requirements documentation, and validation strategies Assist in executing tests on power systems, avionics, and propulsion components (functional, performance, and environmental) Learn and apply engineering best practices, processes, and documentation standards Support hardware bring-up, test station calibration, and system verification Work collaboratively with cross-functional teams including hardware, software, and systems engineers Perform other related duties as assigned to support ongoing engineering efforts Basic Qualifications (Required Skills & Experience) Currently pursuing a Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field Academic or personal project experience in one or more of the following: Power electronics, battery systems, or electric motors Embedded systems, FPGA, or RF systems Digital and analog circuit design Familiarity with electrical protocols such as I2C, SPI, UART, USB, CAN, or LVDS Basic programming knowledge in C, C++, or C# Exposure to test equipment like oscilloscopes, multimeters, and power supplies Strong analytical and troubleshooting skills Effective communication skills and ability to work well in a team Preferred Qualifications & Competencies Hands-on experience with PCB testing, debugging, or electronics prototyping Exposure to Visual Studio, Git, or hardware/software integration environments Familiarity with version control and defect tracking tools Experience with scripting or automation for test procedures (e.g., Python) Passion for aerospace, robotics, or defense-related systems Demonstrated initiative, accountability, and a willingness to learn Ability to manage time effectively and adapt in a fast-paced, team-oriented environment Physical Demands Ability to work in an office and light manufacturing/test environment (Constant) Required to sit, stand, and use computer equipment for extended periods (Frequent) May be required to lift and carry up to 10 lbs. (Occasional) ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR

Mercury Systems is seeking a motivated and innovative Electrical Engineering Intern eager to learn, contribute, and bring fresh ideas to complex design challenges. In this hands-on role, you'll gain experience across the full hardware development lifecycle while working closely with a collaborative, multidisciplinary engineering team. Job Responsibilities: * Work with experienced electrical engineers to support hardware design, development, integration, and testing * Participate as a hands-on contributor throughout the development lifecycle, including schematic design, layout support, design verification testing (DVT), validation, and optimization * Design, develop, and verify complex circuits or submodules using modern schematic capture tools * Support board bring-up activities, including drafting test plans and documenting test results * Assist with product validation testing such as EMC, power, thermal, and environmental stress screening * Collaborate with cross-functional teams including Mechanical Engineering, Manufacturing, Quality, Software, and Procurement * Support production by helping troubleshoot manufacturing issues and field failure investigations * Drive procurement of prototype materials to verify form, fit, and function * Create and maintain Bills of Material (BoMs/PLs) * Draft and manage Engineering Change Requests (ECRs) * Apply design for manufacturing (DFM), design for assembly (DFA), and design for test (DFT) principles Required Qualifications: * Currently enrolled in a university program pursuing a Bachelor's degree in Electrical Engineering, Computer Engineering, or a related technical discipline * A minimum GPA of 3.1 is required. You will be asked to submit your transcripts during the review process * Basic understanding of high-speed digital and analog circuitry, power management, and electromagnetic interference (EMI) * General knowledge of electronic schematic tools (e.g., Allegro Design Entry HDL, Mentor Graphics/DXDesigner) * Familiarity with digital test equipment such as multimeters, oscilloscopes, spectrum analyzers, and power supplies * Strong organizational, verbal, and written communication skills * Proficiency with standard documentation and presentation tools * Ability to work effectively in a fast-paced, multidisciplinary environment Preferred Qualifications: * Exposure to conventional and advanced manufacturing techniques * Hands-on lab experience including soldering or rework equipment * Prior internship, co-op, or academic project experience related to hardware design or testing "This position requires you to be able to obtain a government security clearance. Security clearances may only be granted to U.S. citizens." Why should you join Mercury Systems? Mercury Systems is a technology company that makes the world a safer, more secure place. We push processing power to the tactical edge, making the latest commercial technologies profoundly more accessible for today's most challenging aerospace and defense missions. From silicon to system scale, Mercury enables customers to accelerate innovation and turn data into decision superiority. Headquartered in Andover, Massachusetts, Mercury employs more than 2,300 people in 24 locations worldwide. To learn more, visit mrcy.com Our Culture We are committed to making Mercury a great place to work, no matter where our employees are located. We offer a casual and enjoyable atmosphere that allows employees to learn and grow. We help and care for one another and work as one to achieve results for us and for our customers. We value communication and transparency, and strive to foster two-way dialogue at all levels of the organization. We are committed to lifelong learning, offering comprehensive skills training and tuition reimbursement. Whether you're just starting out on your career journey or you are an experienced professional, it's important to us that you feel recognized and rewarded for your contributions. To find out more about Why Mercury?, or visit the Mercury Community or find answers to general questions at Mercury FAQs Mercury Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex (including pregnancy), sexual orientation, gender identity, national origin, genetic information, creed, citizenship, disability, protected veteran or marital status. As an equal opportunity employer, Mercury Systems is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact the number below for assistance. ************** Click here read about our recent press release.

Claros is a power management solutions company that is innovating at the intersection of power and compute to make AI more sustainable and widely available. By driving down the cost and complexity of power delivery and leveraging innovative hardware and software, the company seeks to decrease energy consumption, optimize power delivery, increase compute performance, and maximize the efficiency of AI operations. Electrical Engineer Intern 2026 About Claros Claros enables Grid-to-Chip power infrastructure solutions for next generation Data Centers. Our mission is to transform power management to meet the global energy demand created by big data, artificial intelligence and ML. Through our innovative power delivery platform, our technology helps next generation data centers implement and operate server platforms that identify, control, and optimize power and energy management systems to meet real-world end user demands. We serve government and commercial customers. About The Team We are open-minded, fast paced, problem solvers that value open dialogue and candor. Our passion is to challenge the status-quo and we embrace transformational thinking. Our response is never “no, but….” instead “yes, if….”. We are mindful of our personal and organizational blinders and try to build an environment where our team members are At Their Best. What You Will Do Rapidly design, develop, and test highly reliable electronics for the IVR team. Drive electrical architecture, specification, component selection, circuit board design, implementation, verification, board bring-up, and debugging. Partner with software, mechanical, thermal, manufacturing teams, and production test teams. What You Bring Bachelor's degree in electrical or computer engineering. Experience rapidly designing electronics products Minimum BS or MS in electrical engineering 0-2+ years experience in the field preferred Would Be Helpful 2+ years of professional experience rapidly designing and delivering highly reliable products. 2+ years of electronic product experience designing hardware from concept through production; strong emphasis on full life cycle development of new hardware products and not small incremental updates to legacy hardware. 2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz SerDes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. 2+ years of professional experience testing, troubleshooting and debugging electronics. 2+ years of professional experience with fast-paced projects. Strong understanding of computers and programming languages (Python, C/C++). Demonstrated ability to work in a highly cross-functional role. Ability to work in a fast paced, autonomously driven, and demanding start-up atmosphere. Excellent communication skills both written and verbal. What We Offer Career track opportunity with potential for rapid advancement with strong performance as the firm grows 100% employer paid, comprehensive health care including medical, dental, and vision for you and your family. Paid maternity and paternity for 14 weeks at employees' normal pay. Unlimited PTO, with management approval. Opportunities for professional development and continued learning. Optional 401K, FSA, and equity incentives available. Salary Range: $30-$45 an hour. This represents the typical salary range for this position based on experience, skills, and other factors.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As an Electrical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Electrical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Electrical Engineering co-ops and interns enter into the following positions: Electrical & Instrumentation (E&I) Project Engineers work on a variety of real-world electrical and instrumentation projects in a refinery setting. During your time at MPC, you will develop and utilize project management skills including scope alignment, cost and schedule development, and teamwork through multiple engineering phases. You will also support the area teams. We are committed to developing engineers into professional project managers who successfully manage projects of all sizes. Reliability Electrical & Instrumentation (E&I) Engineers troubleshoot Electrical & Instrumentation issues at the refinery. As a reliability intern, you will help analyze failures of equipment, develop solutions for recurring equipment difficulties, submit Project Request Forms (PRF's) to implement solutions, and understand equipment maintenance strategies. There will be opportunities to use electrical analysis software to solve coordination issues and run Arc Flash studies for the power system, as well as learning and understanding about how our critical Refinery Safety Instrumented Systems (SIS) are applied. Process Control / Technical Service Engineers can work on a wide array of projects in support of the process control systems installed throughout the refinery and products movements areas. The process control systems in the refinery provide real-time control and data acquisition functions in support of operating the refinery process and electrical equipment. Typical college co-op assignments include the following: troubleshooting system power supply problems, control system programming, hardware and software lifecycle replacement projects, installing and troubleshooting communication networks and monitoring control system performance metrics. Qualifications: * Candidates must be majoring in Electrical Engineering * Strong academic performance * Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. * Positions are available spring, summer, and fall semesters * Availability for multiple work terms is preferred * A valid driver's license is required * Concurrent enrollment in a degree seeking program * Military experience a plus * MIN - $32.31 per hour / MAX - $40.89 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018188 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez, California, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Part time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

About Us Red Cell Partners is an incubation firm building and investing in rapidly scalable technology-led companies that are bringing revolutionary advancements to market in three distinct practice areas: healthcare, cyber, and national security. United by a shared sense of duty and deep belief in the power of innovation, Red Cell is developing powerful tools and solutions to address our Nation's most pressing problems. Electrical Engineer Intern 2026 About Claros Claros enables Grid-to-Chip power infrastructure solutions for next generation Data Centers. Our mission is to transform power management to meet the global energy demand created by big data, artificial intelligence and ML. Through our innovative power delivery platform, our technology helps next generation data centers implement and operate server platforms that identify, control, and optimize power and energy management systems to meet real-world end user demands. We serve government and commercial customers. About The Team We are open-minded, fast paced, problem solvers that value open dialogue and candor. Our passion is to challenge the status-quo and we embrace transformational thinking. Our response is never “no, but….” instead “yes, if….”. We are mindful of our personal and organizational blinders and try to build an environment where our team members are At Their Best. What You Will Do Rapidly design, develop, and test highly reliable electronics for the IVR team. Drive electrical architecture, specification, component selection, circuit board design, implementation, verification, board bring-up, and debugging. Partner with software, mechanical, thermal, manufacturing teams, and production test teams. What You Bring Bachelor's degree in electrical or computer engineering. Experience rapidly designing electronics products Minimum BS or MS in electrical engineering 0-2+ years experience in the field preferred Would Be Helpful 2+ years of professional experience rapidly designing and delivering highly reliable products. 2+ years of electronic product experience designing hardware from concept through production; strong emphasis on full life cycle development of new hardware products and not small incremental updates to legacy hardware. 2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz SerDes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. 2+ years of professional experience testing, troubleshooting and debugging electronics. 2+ years of professional experience with fast-paced projects. Strong understanding of computers and programming languages (Python, C/C++). Demonstrated ability to work in a highly cross-functional role. Ability to work in a fast paced, autonomously driven, and demanding start-up atmosphere. Excellent communication skills both written and verbal. What We Offer Career track opportunity with potential for rapid advancement with strong performance as the firm grows 100% employer paid, comprehensive health care including medical, dental, and vision for you and your family. Paid maternity and paternity for 14 weeks at employees' normal pay. Unlimited PTO, with management approval. Opportunities for professional development and continued learning. Optional 401K, FSA, and equity incentives available. Salary Range: $30-$45 an hour. This represents the typical salary range for this position based on experience, skills, and other factors. We're an Equal Opportunity Employer: You'll receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, or on the basis of disability.

Amca is building airplanes for the 21st century, starting by designing new hardware that flies on today's planes. Aviation was once humanity's boldest ambition, but the industry hasn't successfully built a new plane in 40 years. We don't think it has to be this way. Overview You'll design, prototype, and test aerospace electronics while developing a deep understanding of how electrical systems integrate into flight hardware. What You'll Do Contribute to the design and prototyping of new electrical hardware Assist in creating schematics, performing circuit analyses, and selecting components for aerospace applications Support prototype bring-up and early-revision hardware testing Participate in bench testing, debugging, and iterative design refinement Work with test engineering to define and execute qualification plans, including functional and environmental testing Collaborate with build engineers to ensure manufacturability and incorporate DFM feedback Help manage drawings, BOMs, and part configurations according to aerospace standards Evaluate Amca's electrical product catalog and identify opportunities for new hardware development Who You Are Exceptionally curious and eager to learn-comfortable taking ownership of small projects Hands-on and practical, with a passion for building, testing, and troubleshooting Strong understanding of electrical fundamentals and first-principles thinking Familiar with schematic capture, PCB layout, and basic circuit simulation Comfortable using lab equipment such as oscilloscopes, multimeters, and logic analyzers Independent, resourceful, and creative in solving open-ended engineering problems Plus Prior experience designing or testing electronics for aerospace, automotive, or robotics applications Familiarity with DO-160, MIL-STD, or similar qualification frameworks Experience with firmware development or embedded systems This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a US person as: any individual who is granted U.S. citizenship; or. any individual who is granted U.S. permanent residence ("Green Card" holder); or. any individual who is granted status as a "protected person" under 8 U.S.C 1324b(a)(3). The Advanced Manufacturing Company of America prohibits discrimination or harassment based on the following categories: race, color, religion, religious creed (including religious dress and grooming practices), national origin, ancestry, citizenship, physical or mental disability, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, protected medical leaves (requesting or approved for leave under the Family and Medical Leave Act or the California Family Rights Act), domestic violence victim status, political affiliation, and any other status protected by state or federal law.

What we're building Our vision is to electrify all waterborne vessels, and we're starting with electric water sport boats. Gas boats dominate today's marine industry not because of great product offerings but because of a lack of better alternatives. Boaters have grown accustomed to vehicles that feel stuck in the 1980s: unreliable, expensive, loud, noxious, and a nightmare to own and operate. They're also awful for the water and air they reside in. By contrast, electric boats are superior in nearly every way: not only are they far more reliable and less costly to operate, but they're also quieter, quicker, and cleaner, with no fumes or pollutants. However, they've been held back by both the technology and the talent to make them truly competitive with gas alternatives. That's Arc's opportunity. Using modern, aerospace- and automotive-inspired techniques, we're building our hulls, batteries, cooling systems, firmware, and software together to deliver the next generation of watercraft. What we're looking for We're looking for someone who's fired up by our mission and ready to build. You'll thrive here if you adapt quickly, take ownership, and care about the details. You will join our Electrical Systems Engineering team as a summer intern from June 15th-August 21st 2025. You will work from our headquarters in Torrance, CA. Given that we're a startup, you will be working in a fast-moving, dynamic environment that requires adaptability. That said, here are some responsibilities and qualifications we expect to stay relatively constant for this role Core Responsibilities Assist in developing and testing control algorithms using tools such as MATLAB Simulink and Stateflow. Support hardware and software integration for vehicle control systems. Learn to interpret and work with vehicle electrical schematics to support control designs. Conduct basic tests and simulations to validate control system functionality. Collaborate with team members to troubleshoot and optimize control solutions. What You'll Bring Basic Qualifications Current enrollment in a Bachelor's or Master's degree program in Electrical Engineering, Mechanical Engineering, Mechatronics, or a related field. Familiarity with control systems and MATLAB Simulink (coursework or project experience counts). Strong analytical and problem-solving skills. Ability to work collaboratively in a team environment. Eagerness to learn and adapt in a dynamic setting. Bonus Qualifications Experience with high-performance electric vehicles, solar cars, Formula SAE, or similar projects. Knowledge of high-voltage systems and HV battery pack design/functionality. Familiarity with CAN communication and advanced control systems. Enthusiasm for boating and clean energy. What we value We value these five things above all else: Ownership over both your work and the company's success Empathy for colleagues and for customers Humility in problem solving and collaboration Pragmatism for navigating ambiguity quickly and sensibly Inclusion of different backgrounds, opinions, cultures, etc. Given that we work in a sometimes intense or stressful environment, it's vital that our values align. We'd be happy to elaborate on any or all of these during the interview process. What you'll get Talented teammates that challenge you to be better Access and often input to a wide range of business activities An hourly wage of $39.00/hr An opportunity to have an outsized impact on industry-defining vehicles The ability to drive positive environmental change through your work Daily lunches, plenty of snacks, lots of swag, and more Boat rides! Hope to hear from you soon! The crew at Arc

This role is with RippleMatch's partner companies. RippleMatch partners with hundreds of companies looking to hire top talent. About RippleMatch RippleMatch is your AI-powered job matchmaker. Our platform brings opportunities directly to you by matching you with top employers and jobs you are qualified for. Tell us about your strengths and goals - we'll get you interviews! Leading employers leverage RippleMatch to build high-performing teams and Gen Z job seekers across the country trust RippleMatch to launch and grow their careers. Requirements for the role: Currently pursuing a Bachelor's or Master's degree in Electrical Engineering or a related field. Basic knowledge of electrical circuit design, signal processing, and system integration. Introductory understanding of microcontroller programming and embedded systems. Awareness of industry standards and electrical safety regulations. Strong problem-solving skills and the ability to troubleshoot electrical issues. Good organizational and time management skills, with the capacity to handle multiple tasks. Effective communication skills, both written and verbal. Demonstrated ability to work collaboratively in a team environment. Eagerness to learn and adapt to new challenges and technologies. Participation in university projects, labs, or competitions related to electrical engineering is preferred.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary Internship Term: Summer 2026 This is a bucket application, and is not an official opening. Your application can be considered for Rivian's 2026 internship programs. If you are selected, you will receive an invitation to interview for an open posting. Rivian internships are experiences optimized for student candidates. To be eligible, you must be an undergraduate or graduate student in an accredited program during the internship term with an expected graduation date between December 2026 and June 2028. If you are not pursuing a degree, please see our full time positions on our Rivian careers site. Note that if your university has specific requirements for internship programs, it is your responsibility to fulfill those requirements. Responsibilities Applying to this opening will place you into consideration of Rivian's 2025 internship programs. Teams your application can be considered for include: Electrical Hardware Development Electrical Hardware Design Electrical Architecture Integration & Test Design Verification Power Electronics Propulsion Energy & Charging Qualifications Must be currently pursuing a bachelors, masters, or PhD degree Actively pursuing a degree or one closely related in Electrical Engineering Proficiency in Electrical Engineering fundamentals Experience with languages such as C, C++, Python Applied knowledge and understanding of engineering first principles Must have excellent written and verbal communication skills Ability to navigate ambiguity in a fast-paced environment Capable of working as a member of a team across several cross functional disciplines, including with external stakeholders Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Must be currently pursuing a bachelors, masters, or PhD degree Actively pursuing a degree or one closely related in Electrical Engineering Proficiency in Electrical Engineering fundamentals Experience with languages such as C, C++, Python Applied knowledge and understanding of engineering first principles Must have excellent written and verbal communication skills Ability to navigate ambiguity in a fast-paced environment Capable of working as a member of a team across several cross functional disciplines, including with external stakeholders Applying to this opening will place you into consideration of Rivian's 2025 internship programs. Teams your application can be considered for include: Electrical Hardware Development Electrical Hardware Design Electrical Architecture Integration & Test Design Verification Power Electronics Propulsion Energy & Charging

At Vast, our mission is to contribute to a future where billions of people are living and thriving in space. We are building artificial gravity space stations, allowing long-term stays in space without the adverse effects of zero-gravity. Our initial crewed space habitat will be Haven-1, scheduled to be the world's first commercial space station when it launches into low-Earth orbit in 2026. It is part of our stepping stone approach to continuous human presence in LEO. Our team is all-in, committed to executing our mission safely and on time. If you want to work with the most talented people on Earth furthering space exploration for humanity, come join us. Vast offers an advanced engineering internship program with hands-on opportunities to design and build space hardware and software. You will play a crucial role in the development of the systems that will be required for the operation of artificial-gravity human-rated space stations. We have four engineering internship postings for different areas of focus (Mechanical / Aerospace, Manufacturing, Electrical, Software). Please only apply to the most relevant posting for your background. Our interns are mentored by industry experts to solve challenging real-world engineering problems across various teams. This is a 12 week internship at our HQ based in Long Beach, CA. Responsibilities will vary depending on each intern's area of expertise. We are currently looking for candidates with experience in the the following engineering disciplines: Avionics Avionics Test Avionics Systems Power RF EMI-EMC Embedded Software Minimum Qualifications: Qualified candidates must be enrolled in a Bachelor's or Master's degree program from an accredited college or university in electrical engineering, computer engineering, or other related engineering disciplines Ability to work full-time onsite in Long Beach, CA Preferred Qualifications: Application of technical skills outside of the classroom (examples include: extracurricular projects, volunteering, personal projects, laboratory research, or prior internship/work experience) Proficiency in Circuit Design Software (e.g., Altium, LT Spice, etc) Strong analytical and problem-solving skills with attention to detail Excellent communication skills and the ability to work collaboratively in a professional team environment Eagerness to learn and adapt in a dynamic startup environment Engineering problem solving capabilities Self-directed with a positive attitude and team spirit Pay Range: California $35 - $40 USD COMPENSATION AND BENEFITS Base salary will vary depending on job-related knowledge, education, skills, experience, business needs, and market demand. Salary is just one component of our comprehensive compensation package. Full-time employees also receive company equity, as well as access to a full suite of compelling benefits and perks, including: 100% medical, dental, and vision coverage for employees and dependents, flexible paid time off for exempt staff and up to 10 days of vacation for non-exempt staff, paid parental leave, short and long-term disability insurance, life insurance, access to a 401(k) retirement plan, One Medical membership, ClassPass credits, personalized mental healthcare through Spring Health, and other discounts and perks. We also take pride in offering exceptional food perks, with snacks, drip coffee, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast's ongoing commitment to providing high-quality meals for employees. U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. This status includes U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Vast is an Equal Opportunity Employer; employment with Vast is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Title: Electrical Engineer Intern Job Type: Summer 2026 Internship Business Unit: Datron, Space Vector or ATI Schedule: 9/80: Employees work 9 out of every14 days - totaling 80 hours worked - and have every other Friday off. About Fisica Inc. Fisica, Inc. is a premier manufacturer of advanced defense products, specializing in the design and production of airborne and ground-based antennas, as well as cutting-edge electromagnetic systems and simulators. Headquartered in San Leandro, California, with additional operations in Simi Valley, Fisica plays a vital role as a trusted partner to leading defense primes and the U.S. Department of Defense. Our company operates as - ATI, Randtron, Datron and Space Vector-each bringing deep expertise and innovation to the defense sector. Led by a seasoned management team, Fisica is committed to excellence in engineering, manufacturing, and mission-critical solutions that enhance national security. At Fisica, we foster a strong, collaborative work culture that values individual contributions and empowers our employees. Our commitment to innovation, integrity, and teamwork makes us a leader in the defense industry and an exceptional place to build a career. Overall Summary: We are seeking a detail-oriented, motivated Electrical Engineer Intern to join our Engineering team. You will be working closely with a mentor electrical engineer throughout all various phases of product development and testing multiple key aerospace programs. In this role, you will be assisting in circuit design, analysis, board layout, hardware debugging, and testing. The main products will be for Battery Management Systems (BMS) and related test equipment. Work is to be performed with general oversight and may require mentorship of junior level engineers. May manage large projects or processes that are both inside and outside of the immediate job area. The internship will take place in the summer of 2026 with flexibility for a May or June start time. Key Responsibilities: Evaluate electrical and electronic components based on technical specifications and project requirements. Printed Circuit Board (PCB) Schematic Design, Layout, and Troubleshooting. Work closely with electrical engineers assisting in PCB development and test-out. Analysis for Power/Signal Integrity, Mixed Signal, ADCs and DACs. Work with Digital/FPGA team to implement proper floor planning. Interface with component databases, manufacturers, and distributors for sourcing and obsolescence data. Use ERP systems (preferably Deltek Costpoint) to manage part data and component procurement. Participate in Electrical/ Electronic/ Electromechanical (EEE) Parts Engineering technical assignments related to hardware manufacturing and testing. Assignments will include technical evaluation and support of manufacturing issues/concerns. Support engineering change orders (ECOs) and related documentation updates. Ensure all selected components comply with regulatory standards (RoHS, ITAR, etc.). In-Office Work Required. Education and Experience Required: Candidates must be currently pursuing a bachelor's degree in electrical engineering, electronics engineering technology, or related technical discipline. GPA 3.0 or Higher. Junior/Senior year of Bachelors in an Electrical engineering or electronics product support role. Knowledge of electrical circuit fundamentals, including passive, active, and electromechanical parts, High Voltage parts. Must have the ability to communicate clearly with colleagues. Able to Write and Read proficiently with technical vocabulary. Ability to interpret policies, procedures and practices. The ability to obtain a future Security Clearance is required for the role. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Preferred Qualifications: Experience supporting government or defense programs. Battery Management Experience. Experience with Power Integrity Analysis Tools and Signal Integrity Analysis Tools. Knowledge of ITAR/EAR compliance regulations. Experience with ADCs/DACs. Familiarity with PLM tools (e.g., Arena, Windchill, Agile). Strong analytical, communication, and documentation skills. Benefits & Opportunities Gain real-world, impactful experience on cutting-edge aerospace and defense technology. Opportunity for mentorship from industry veterans and experts. Competitive compensation package and potential eligibility for full-time employment offers upon graduation. Exposure to a wide range of engineering processes from concept to production manufacturing and testing. In compliance with pay transparency requirements, the salary range for this role is $28.00/hr. - $35.00/hr. This is not a guarantee of compensation or salary, as the final offer amount may vary based on factors including but not limited to experience and geographic location. EEO Statement Fisica is proud to be an Equal Opportunity Employer. Fisica is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, military and veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. Fisica maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Fisica is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Job Description Job Title: Electrical Engineer Intern Job Type: Summer 2026 Internship Business Unit: Datron, Space Vector or ATI Schedule: 9/80: Employees work 9 out of every14 days - totaling 80 hours worked - and have every other Friday off. About Fisica Inc. Fisica, Inc. is a premier manufacturer of advanced defense products, specializing in the design and production of airborne and ground-based antennas, as well as cutting-edge electromagnetic systems and simulators. Headquartered in San Leandro, California, with additional operations in Simi Valley, Fisica plays a vital role as a trusted partner to leading defense primes and the U.S. Department of Defense. Our company operates as - ATI, Randtron, Datron and Space Vector-each bringing deep expertise and innovation to the defense sector. Led by a seasoned management team, Fisica is committed to excellence in engineering, manufacturing, and mission-critical solutions that enhance national security. At Fisica, we foster a strong, collaborative work culture that values individual contributions and empowers our employees. Our commitment to innovation, integrity, and teamwork makes us a leader in the defense industry and an exceptional place to build a career. Overall Summary: We are seeking a detail-oriented, motivated Electrical Engineer Intern to join our Engineering team. You will be working closely with a mentor electrical engineer throughout all various phases of product development and testing multiple key aerospace programs. In this role, you will be assisting in circuit design, analysis, board layout, hardware debugging, and testing. The main products will be for Battery Management Systems (BMS) and related test equipment. Work is to be performed with general oversight and may require mentorship of junior level engineers. May manage large projects or processes that are both inside and outside of the immediate job area. The internship will take place in the summer of 2026 with flexibility for a May or June start time. Key Responsibilities: Evaluate electrical and electronic components based on technical specifications and project requirements. Printed Circuit Board (PCB) Schematic Design, Layout, and Troubleshooting. Work closely with electrical engineers assisting in PCB development and test-out. Analysis for Power/Signal Integrity, Mixed Signal, ADCs and DACs. Work with Digital/FPGA team to implement proper floor planning. Interface with component databases, manufacturers, and distributors for sourcing and obsolescence data. Use ERP systems (preferably Deltek Costpoint) to manage part data and component procurement. Participate in Electrical/ Electronic/ Electromechanical (EEE) Parts Engineering technical assignments related to hardware manufacturing and testing. Assignments will include technical evaluation and support of manufacturing issues/concerns. Support engineering change orders (ECOs) and related documentation updates. Ensure all selected components comply with regulatory standards (RoHS, ITAR, etc.). In-Office Work Required. Education and Experience Required: Candidates must be currently pursuing a bachelor's degree in electrical engineering, electronics engineering technology, or related technical discipline. GPA 3.0 or Higher. Junior/Senior year of Bachelors in an Electrical engineering or electronics product support role. Knowledge of electrical circuit fundamentals, including passive, active, and electromechanical parts, High Voltage parts. Must have the ability to communicate clearly with colleagues. Able to Write and Read proficiently with technical vocabulary. Ability to interpret policies, procedures and practices. The ability to obtain a future Security Clearance is required for the role. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Preferred Qualifications: Experience supporting government or defense programs. Battery Management Experience. Experience with Power Integrity Analysis Tools and Signal Integrity Analysis Tools. Knowledge of ITAR/EAR compliance regulations. Experience with ADCs/DACs. Familiarity with PLM tools (e.g., Arena, Windchill, Agile). Strong analytical, communication, and documentation skills. Benefits & Opportunities Gain real-world, impactful experience on cutting-edge aerospace and defense technology. Opportunity for mentorship from industry veterans and experts. Competitive compensation package and potential eligibility for full-time employment offers upon graduation. Exposure to a wide range of engineering processes from concept to production manufacturing and testing. In compliance with pay transparency requirements, the salary range for this role is $28.00/hr. - $35.00/hr. This is not a guarantee of compensation or salary, as the final offer amount may vary based on factors including but not limited to experience and geographic location. EEO Statement Fisica is proud to be an Equal Opportunity Employer. Fisica is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, military and veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. Fisica maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Fisica is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

ReqID: LOS0000UI **See it differently** You see the world through a unique lens and that's exactly what we need. We embrace how you see things differently - it's essential for creating a sustainable future. Arup is a global consultancy with advisory and technical expertise across more than 150 disciplines. We guide, plan and design the future of the built environment. Globally, each year we recruit hundreds of interns to help us see things differently and solve the most complex challenges facing our clients, climate and communities. **The Opportunity** + Design power distribution, lighting and lighting controls, grounding with respect to buildings and infrastructure projects + Short circuit, overcurrent coordination, load and arc flash studies + Lighting photometric calculations using AGI + Assign circuitry for Power and Lighting devices + Technical report writing + Work on projects using Revit MEP and SKM + Contribute to the development of reports and electrical calculations + Work with people from other disciplines and/or vendors to gain knowledge on new subjects + Attend meetings - listen, ask questions. Be involved in discussions with other disciplines and Architects to gain knowledge & experience. **Is this role right for you?** + Pursuing a Bachelor's Degree in Electrical Engineering(BSEE), or similar degree, bachelor's degree in Architectural Engineering (BSAE), or Bachelor of Science in Engineering Concentration: Electrical + Demonstrated interest in the electrical engineering industry with an emphasis on the power side of the discipline within buildings and infrastructure projects + Skills in planning and organizing + Ability to communicate thoughts and technical ideas in an accessible way, both in person and in writing + Attitude of taking independent initiative, exhibiting creative problem-solving, eagerness to learn, while remaining dedicated to teamwork + The ability to prioritize effectively, balance assigned work and exceptional organization skills required for our constantly evolving environment + Strong interpersonal and communication skills essential for team-based working + Presentation skills with colleagues and clients of all levels + EIT/ FE certification preferred + Coursework in building systems design, electrical power systems design, control systems, electric machines, and codes and standards preferred + Internship experience in a consulting firm with emphasis on buildings electrical power system design preferred + Demonstrated interest in sustainability as evidenced by extracurricular activities, etc preferred + Academic research, coursework, or other experience with alternative energy systems and other technologies new to the construction industry preferred + Experience with Revit MEP, AGI 32, SKM Power Tools preferred + Experience with automation or machine learning preferred + Proven ability to perform in a deadline situation preferred + Evidence of teamwork and leadership such as professional accomplishment or honor society preferred + Candidate must be eligible to work in the US without the need for employer sponsored work authorization now or in the future to be considered for this role. We're looking for: + Changemakers: A passion for sustainable development and creating a better world is key. + Innovative minds: We're looking for critical thinkers who embrace new ideas and challenge the status quo. + Growth seekers: You have a growth mindset, always eager to learn and explore new ways of working. + Adaptable adventurers: You're ready to take on any challenge that comes your way. **What we offer you** At Arup, we care about each member's success, so we can grow together. Our intern experience offers you: + Purpose-driven work: Join an employee-owned team tackling climate, biodiversity, and social challenges, aligned with the UN's Sustainable Development Goals. + Create remarkable outcomes: We trust you to explore challenges, drive change, and create lasting outcomes for our clients, climate and communities. + Inclusive culture: Your unique perspective matters. We celebrate diversity and foster a supportive, social environment where everyone belongs. + Career growth: Grow your skills through innovative projects, training, and mentoring in a supportive environment. We invest in your future. + Work-life balance: Our hybrid model offers flexibility to balance work with your life. We balance your needs with our clients and communities **Los Angeles Hiring Range** - The good faith base salary hiring range for this job if performed in Los Angeles, CA is $24/hour to $43/hour. **This range is commensurate with experience, educational background, and skill level.** Benefits are not included in the base salary. Please note hiring ranges for candidates performing work outside of Los Angeles, CA will differ. **Next Steps** We will be reviewing our candidates for this position on a rolling basis. Once you've submitted your application, we'll invite you to showcase your skills through a pre-recorded video interview if you've met the minimum requirements. After reviewing your submission, a member of our team will get in touch with you to discuss the next steps. Arup is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of a protected veteran, or disability. Stay safe online. Recruitment fraud is on the rise, and Arup's name, logo, and branding have been used in fraudulent job advertisements. Arup will never ask for bank information as part of our recruitment process. **Different people, shared values** Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at. \#LI-EC1 \#GOARUP EOE-Protected Veterans/Disability

SetPoint Medical's Electrical Engineering intern responsibilities will be to perform the circuit analysis and FMEA of microelectronic circuits used in our medical devices, including support of long-term reliability testing, product sustaining and Next Gen activities, and electrical circuit failure investigations. This work will involve utilizing theoretical and analytical tools, emulated boards, production PCBA, and bench top and data acquisition equipment. The FMEAs shall be documented following SetPoint's procedure. SetPoint Medical's interns contribute to groundbreaking projects and initiatives while getting hands-on experience for career development. As part of the summer internship program, motivated students and young leaders will be able to join a collaborative effort in one of our departments and expand upon your skills with a fundamental impact on the future of medicine. This fun, fast-paced environment will challenge your abilities in your respective field while offering exciting career development and team bonding activities throughout the summer. This paid internship will allow you to benefit professionally while helping SetPoint define a new therapeutic category of neuroimmune modulation. You will take ownership in projects or tasks with the help of a mentor to guide you along the way, and you will have the opportunity to interact with teams and leaders across the company. This full-time position is in office, Monday - Friday, reporting to company headquarters in Valencia, CA. Internship dates are flexible based on your school calendar. Requirements * Currently pursuing a bachelor's degree or above. * Majoring in Electrical Engineering, Electronics Engineering, or Electrical & Computer Engineering. * Must have completed courses in Basic/Advanced Electronics or Network/Circuit Analysis at a minimum. * Preferred knowledge in RF circuit design, Bluetooth, Wireless Power Transfer, Li-Ion Battery charging, and SMT component hand soldering is a plus. * Minimum cumulative GPA of 3.0. * Highly self-motivated with a strong passion for innovation and quality. * Excellent interpersonal and communication skills, with the ability to collaborate effectively across all levels of the organization. * Strong teamwork skills, demonstrating inclusivity, decisiveness, facilitation, process improvement mindset, and approachability. Location Company Headquarters in Valencia, CA Company Description SetPoint Medical is a commercial-stage medical technology company dedicated to improving care for people living with chronic autoimmune diseases. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Candidates must have and maintain authorization to work within the United States as a condition of employment. We are proud to be an equal opportunity employer and we value diversity. SetPoint does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. Salary Description $24-$27/hour, depending on level of education

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As an Electrical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Electrical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Electrical Engineering co-ops and interns enter into the following positions: Electrical & Instrumentation (E&I) Project Engineers work on a variety of real-world electrical and instrumentation projects in a refinery setting. During your time at MPC, you will develop and utilize project management skills including scope alignment, cost and schedule development, and teamwork through multiple engineering phases. You will also support the area teams. We are committed to developing engineers into professional project managers who successfully manage projects of all sizes. Reliability Electrical & Instrumentation (E&I) Engineers troubleshoot Electrical & Instrumentation issues at the refinery. As a reliability intern, you will help analyze failures of equipment, develop solutions for recurring equipment difficulties, submit Project Request Forms (PRF's) to implement solutions, and understand equipment maintenance strategies. There will be opportunities to use electrical analysis software to solve coordination issues and run Arc Flash studies for the power system, as well as learning and understanding about how our critical Refinery Safety Instrumented Systems (SIS) are applied. Process Control / Technical Service Engineers can work on a wide array of projects in support of the process control systems installed throughout the refinery and products movements areas. The process control systems in the refinery provide real-time control and data acquisition functions in support of operating the refinery process and electrical equipment. Typical college co-op assignments include the following: troubleshooting system power supply problems, control system programming, hardware and software lifecycle replacement projects, installing and troubleshooting communication networks and monitoring control system performance metrics. Qualifications: * Candidates must be majoring in Electrical Engineering * Strong academic performance * Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. * Positions are available spring, summer, and fall semesters * Availability for multiple work terms is preferred * A valid driver's license is required * Concurrent enrollment in a degree seeking program * Military experience a plus * MIN - $32.31 per hour / MAX - $40.89 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018187 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez, California, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

Full-time, Internship Description SetPoint Medical's Electrical Engineering intern responsibilities will be to perform the circuit analysis and FMEA of microelectronic circuits used in our medical devices, including support of long-term reliability testing, product sustaining and Next Gen activities, and electrical circuit failure investigations. This work will involve utilizing theoretical and analytical tools, emulated boards, production PCBA, and bench top and data acquisition equipment. The FMEAs shall be documented following SetPoint's procedure. SetPoint Medical's interns contribute to groundbreaking projects and initiatives while getting hands-on experience for career development. As part of the summer internship program, motivated students and young leaders will be able to join a collaborative effort in one of our departments and expand upon your skills with a fundamental impact on the future of medicine. This fun, fast-paced environment will challenge your abilities in your respective field while offering exciting career development and team bonding activities throughout the summer. This paid internship will allow you to benefit professionally while helping SetPoint define a new therapeutic category of neuroimmune modulation. You will take ownership in projects or tasks with the help of a mentor to guide you along the way, and you will have the opportunity to interact with teams and leaders across the company. This full-time position is in office, Monday - Friday, reporting to company headquarters in Valencia, CA. Internship dates are flexible based on your school calendar. Requirements • Currently pursuing a bachelor's degree or above. • Majoring in Electrical Engineering, Electronics Engineering, or Electrical & Computer Engineering. • Must have completed courses in Basic/Advanced Electronics or Network/Circuit Analysis at a minimum. • Preferred knowledge in RF circuit design, Bluetooth, Wireless Power Transfer, Li-Ion Battery charging, and SMT component hand soldering is a plus. • Minimum cumulative GPA of 3.0. • Highly self-motivated with a strong passion for innovation and quality. • Excellent interpersonal and communication skills, with the ability to collaborate effectively across all levels of the organization. • Strong teamwork skills, demonstrating inclusivity, decisiveness, facilitation, process improvement mindset, and approachability. Location Company Headquarters in Valencia, CA Company Description SetPoint Medical is a commercial-stage medical technology company dedicated to improving care for people living with chronic autoimmune diseases. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Candidates must have and maintain authorization to work within the United States as a condition of employment. We are proud to be an equal opportunity employer and we value diversity. SetPoint does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. Salary Description $24-$27/hour, depending on level of education