Electrical engineer internship jobs in Mesa, AZ - 385 jobs

Qualifications: A Bachelor of Science degree in Electrical Engineering, minimum 8 years of work experience and shall be a licensed engineer (PE). Responsibilities: Individuals assigned to this classification will perform engineering calculations and must be able to layout and design systems in accordance with established policies, standards, procedures, code and shall exercise judgment in their application with minimal to no supervision. Individuals should be able to apply practical knowledge and experience in their field to resolve problems and conflicts related to the projects assigned to them. Individuals should be capable of independent decision-making for engineering tasks on the projects assigned to them. Individuals may occasionally supervise subordinate personnel or assist other engineers or designers. Knowledge of discipline specific codes and other building codes. Possess excellent verbal and written communication skills. Good leadership skills to educate client on design and other project requirements. Meet with the Project Engineer and the Project Manager to discuss the design scope, schedule, budget, phasing, site issues, and design review issues. Work with Project Manager and Project Engineer to prepare design budgets and schedules. Estimate discipline man-hours required to complete the design requirements of a project. Provide leadership and assign design job functions to designated designers and supervise their efforts in completing the project on time and within budget. Implement system types as selected by the Project Engineer and provide complete. construction documents that match the client and project team's requirements. Review preliminary and final engineering design with other disciplines for function, clearances, coordination, and final design selection. Perform a final review of the engineering drawings. Client contact. Perform quality assurance on projects in coordination with technical manager or project engineer. Mentor and motivate Engineering designers I, II and III. Set high standards, Professional integrity and seeks for the company and client best interest. Ability to meet fast-paced deadlines while maintaining quality design. Additional duties as required. Skills: Active Listening Critical Thinking Proficient in REVIT Proficient in Engineering Modeling tools Researching and writing reports/opinions. Excellent written and oral communication. Proficient in Microsoft Office tools Excellent Time Management Equipment selection Excellent judgement and decision making Excellent management of personnel resources - Motivating, developing and directing team members.

HIRING NOW-EXPERIENCED FIELD STACK TESTERS FOR ALL LOCATIONS ACROSS THE U.S. Anchorage, Alaska/ Atlanta, Georgia/ Bakersfield, California/ Baton Rouge, Louisiana/ Birmingham, Alabama/ Boston, Massachusetts/ Cedar Rapids, Iowa Charlotte, North Carolina / Cypress, California/ Dallas ,Texas/ Decatur, Alabama/ Denver, Colorado/ Evansville, Indiana/ Houston, Texas/ Jacksonville, Florida Kansas City, Kansas/ Little Rock, Arkansas/ Minneapolis, Minnesota/ Vancouver, Washington/ Philadelphia, Pennsylvania/ Phoenix, Arizona Pittsburgh, Pennsylvania/ Roanoke, Virginia/ Salt Lake City, Utah/ St. Louis, Missouri/ Syracuse, New York and Tampa Florida. Duties & Responsibilities: Support Stack Emissions Testing Operations Conduct onsite stack emissions testing, using proven competencies with wet chemistry and instrumental sampling methodologies Assist to Train and mentor Project Scientists (Field Technicians) on field procedures, test methods, calibrations, etc. using Alliance standardized training materials Motivate the team, and ensure productivity Supervise and reviews equipment calibrations for pivots, control modules and nozzles Assists with pricing and deliverables (proposal/test plans/reports) review Serves as the company's representative to interface with customers and regulatory (EPA) personnel Uphold the highest standards of data quality & ethics Requirements: Must have experience leading stack emissions testing projects in the field. Preferred experience with, client interface, safety leadership, data collection, quality initiatives and timely deliverables to the clients Specific knowledge of instrumental and wet chemistry equipment operation, troubleshooting and calibration required Flexibility to work 40+ hours per week as well as some overnight stays & travel will be required. Consistent standing or walking, bending, crouching, or stooping, climbing ladders and/or stairs, frequent lifting of objects weighing up to 50 pounds. Must be able to distinguish between shades of color Excellent communication skills (internally and with Clients and Regulators) with professional demeanor. Must maintain positive attitude with ability to work well in groups and desire to achieve goals and grow into higher positions of leadership. Valid driver's license Employee Benefits: Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this role can average between $60,000-$100,000 annually. The total compensation can include base salary, and bonus plans. The individual for this role must have hands-on experience as a field stack tester preferably with QSTI certifications in methods 1-4. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Instrumentation & Controls (I&C) Engineer - PE Required Full-Time | On-Site | Semiconductor Industry | Multidiscipline A&E Firm We are seeking an experienced Instrumentation & Controls (I&C) Engineer with a Professional Engineer (PE) license to join our growing multidisciplinary Architectural & Engineering team. This role will focus heavily on semiconductor facility projects and requires deep technical expertise, strong coordination skills, and the ability to deliver high-quality engineering packages within a fast-paced project environment. The ideal candidate is proactive, detail-oriented, and comfortable working collaboratively with electrical, mechanical, process, and structural teams to support highly complex facility systems. Key Responsibilities Instrumentation & Controls Design Develop complete I&C design packages, including P&IDs, control narratives, loop diagrams, wiring diagrams, instrument indices, panel layouts, and I/O lists. Select, size, and specify instrumentation for systems such as ultrapure water, specialty gases, chemical distribution, HVAC, and process utilities. Create sequences of operation (SOO) and develop detailed control logic aligned with client requirements. Design and integrate control system architectures including PLC, DCS, SCADA, BMS, and EMS platforms. Prepare technical specifications and engineering documents for construction and permitting. Project Coordination Collaborate with multiple engineering disciplines to ensure complete and coordinated system designs. Participate in design reviews, model coordination meetings, and constructability sessions. Provide direction to CAD/Revit designers for instrument placement, routing, and system integration. Project Execution Prepare and seal engineering drawings and documents using a valid PE license. Assist with scope development, cost estimates, and proposal preparation for I&C project components. Review vendor submittals and shop drawings for compliance with project requirements. Field Support & Commissioning Provide on-site support including installation verification, calibration oversight, loop checks, and functional testing. Troubleshoot instrumentation and control system issues during construction and commissioning. Support development of punch lists and resolution of technical issues in the field. Quality, Codes & Standards Ensure all designs comply with ISA, SEMI, NEC, NFPA, IEEE, and applicable local codes. Maintain documentation integrity and support internal standards development. Client Interaction Attend client meetings and design presentations as needed. Communicate technical information clearly to clients, project managers, and multi-discipline teams. Provide timely updates and proactively identify project risks or design changes. Required Qualifications Bachelor's degree in Electrical Engineering, Mechanical Engineering, Chemical Engineering, or related field. Active Professional Engineer (PE) license (required). 5-10+ years of relevant engineering experience, preferably in semiconductor or advanced manufacturing environments. Strong knowledge of instrumentation, controls, automation systems, and semiconductor facility processes. Proficiency with I&C design tools, loop diagrams, P&IDs, instrument databases, and control system architecture. Understanding of ISA standards, NEC, NFPA, and SEMI requirements. Excellent communication, coordination, and problem-solving skills. Preferred Qualifications Experience with tool install projects, process utilities, and advanced semiconductor facilities. Experience working with PLC, DCS, SCADA, BMS, and EMS control platforms. Familiarity with AutoCAD, Revit, and instrumentation design software. Experience supporting commissioning, startup, and troubleshooting activities. Industrial Design offers full benefits including Health/Dental/Vision insurance (single and family), PTO, Paid Holidays and 401k. Affirmative Action/EEO statement - Industrial Design recruits, hires, employs, trains, promotes, and compensates individuals based on job-related qualifications and abilities. Industrial Design is an equal opportunity employer and values diversity. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other status protected by law. Applicants please note: This position requires US work authorization, and we are not looking for out of country/outsourced support or remote workers of any kind. This opening is for local candidates residing in the metro phoenix area or those willing to self-relocate to this area only. All positions listed are full time in office roles with no opportunity for hybrid or work from home accommodations. If you are looking to work remote, please do not apply.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: Top SecretTRAVEL: Yes, 25% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman's Space Sector is seeking a Electronics Engineer - Level 4 to join our team in Gilbert, AZ. You will have the opportunity to design, develop, and execute test procedures and automated test scripts using spacecraft commands, telemetry, and electrical ground support equipment. The ideal candidate has system level test experience working with spacecraft flight hardware and good computer skills. Daily responsibilities will require I&T test preparation leading to direct contact with satellite and space flight hardware. Candidate must be able to tackle issues utilizing skills obtained in the field of electrical engineering, or a related discipline, preferably as it relates to system level integration and test. Required skills include the ability to communicate clearly, and to use critical thinking in troubleshoot of problems. The ability to use a scripting language and formulate automated test scripts is highly desirable. International travel to support launch campaigns may be required. Shift and weekend work to support testing will be required periodically. Job responsibilities include, but are not limited to, the following: General frequent use and application of technical standards, principles, theories, concepts and techniques Develop I&T test procedures, specifications, and test limits Execute I&T testing, monitor tests per specification, troubleshoot, and document all test activities Demonstrates the skill and ability to perform moderately complex professional tasks Understands NG test engineering practices and principles Understands both electrical circuits and software within the flight hardware and EGSE Supports EGSE and flight hardware test/troubleshooting efforts and ability to perform this tasking with little to no oversight from another Electrical Engineer Fully grasps escalation plan when test errors are encountered and understands when to proceed per NG/program process. Participates in anomaly resolution process while offering technical solutions for FRB approval. Travel and support different shifts when required Provides solutions to a variety of technical problems of increasing scope and complexity as assigned Has technical insight and experience to know if test set-up and results make sense Ability to establish and maintain infrequent inter-organizational and outside customer contacts on routine matters. Coordinates with ITEE team lead, electrical technicians, and I&T managers to complete tasking. May participate, prepare, and present material in program review boards (PDRs, CDRs, TRRs, FRBs, etc). Other duties as assigned Basic Qualifications: Bachelor's degree with 8 years of professional experience - OR - Master's degree with 6 years of professional experience - OR - PhD with 4 years of professional experience. Must have the ability to obtain and maintain a U.S. Government DoD Top-Secret security clearance Demonstrate ability to learn and integrate new programming languages based off previous experience Preferred Qualifications: Experience with any of the following Microsoft Visio, National Instruments LabView Experience with hardware or software testing and test scripting Minimum of five years of directly related experience in Integration and test Experience in Electronics troubleshooting Environments testing (Vibration Analysis/Thermal Vacuum chamber testing) Programming experience with any of the following languages: Python, C, C++ Experience writing and automating test scripts Experience in Aerospace or Defense industry (development or test) Already possesses DoD TS/SCI security clearance Curious about all the exciting developments with the Northrop Grumman Space Sector? Click the link below: ************************************* Working at Northrop Grumman is more than just a paycheck. We offer a comprehensive Total Rewards and benefits package designed to help you thrive at work and in life. For more information on our Total Rewards package, please visit our Total Rewards site. Northrop Grumman Total Rewards Primary Level Salary Range: $122,800.00 - $184,200.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Mercury Systems is seeking a motivated and innovative Electrical Engineering Intern eager to join a focused team of engineers developing highly complex, rugged, and secure electronic packaging solutions that support our nation's warfighters and first responders. During this internship, you'll integrate directly with the MicroE team to support the development of next-generation system-in-package (SiP) designs. Job Responsibilities: Collaborate with the SiP team to develop block diagrams, schematics, netlists, and technical documentation Support laboratory activities, including electrical measurements, troubleshooting, and validation testing Develop software scripts to improve team efficiency and automation Work closely with the SiP team to learn and use advanced design tools from Ansys and Cadence Learn and apply the fundamentals of chip-level package design Required Qualifications: Currently enrolled in a university program pursuing a Bachelor's in Electrical Engineering or Computer Engineering A minimum GPA of 3.1 is required. You will be asked to submit your transcripts during the review process Solid understanding of electrical engineering fundamentals Familiarity with electrical schematics Experience with scripting languages such as Python or C++ Hands-on experience with lab equipment (e.g., oscilloscopes, multimeters) Strong verbal communication and technical documentation skills "This position requires you to be able to obtain a government security clearance. Security clearances may only be granted to U.S. citizens." Preferred Qualifications: Prior internship, co-op, or academic project experience related to hardware design or testing

LotusWorks is an Engineering Services provider specializing in managing Commissioning, Construction Services, Calibration, Operations & Maintenance scopes of work within global manufacturing facilities. LotusWorks operates globally across EMEA and North America partnering with the world's leading manufacturers across the Semiconductor, Pharmaceutical & Biologics, Medical Device and Data Centre sectors. Our team of Engineering and Technical professionals is immersed in cutting-edge technologies and innovations. LotusWorks is committed to a diverse and inclusive workplace, integral to our people-first approach. A very exciting opportunity to work with and learn all facilities equipment and operations! As an Engineering Intern at LotusWorks, you will have the opportunity to work closely with our experienced engineering commissioning team and gain practical knowledge in the field of engineering. This internship is a fantastic opportunity for soon-to-be graduates and recent graduates with a bachelor's degree with an engineering discipline to kickstart their careers. Responsibilities: Shadowing and working alongside our team of experienced commissioning engineers. Witnessing and participating in FAT of all utility systems and equipment required to start up and maintain a clean room fabrication plant. Collaborate with commissioning engineers and other professionals to complete assigned tasks. Assist with research, data analysis, and report writing. Participate in training and development opportunities to enhance your skills and knowledge. Any other duties or responsibilities that may be assigned to you in your role. Skills Required: Strong academic background with a solid understanding of engineering principles. Strong knowledge of PC and MS Office applications, SQL, Python Coding, Smartsheets are ideal. Excellent problem-solving skills and a willingness to learn. Effective communication skills, both written and verbal. Ability to work well in a team and independently. Attention to detail and a strong commitment to safety. No prior work experience is required; academic projects would be a plus. Education / Licenses / Certifications Current undergraduate student pursuing a bachelor's degree majoring in Electrical Engineering graduating in December 2025 is required. Recent college graduates with a bachelor's degree majoring in the above, are strongly encouraged to apply. Proof of education, licenses, and certifications will be required where applicable. LotusWorks is an equal opportunity employer and prohibits discrimination and harassment of any kind. We are committed to creating a diverse and inclusive workplace where all employees feel valued, respected, and empowered.

Job Description **Nationwide Search - Relocation and opportunities to travel available** One of the fastest growing manufacturers of mission critical power equipment is seeking Electrical Field Engineer to oversee the installation and commissioning of their equipment. The right candidate will have a extensive background both on the engineering and implementation side working with low to mid voltage power equipment found in data centers. For this role, formal education is a must have. Preferably in an electrical or engineering program. The right candidate will be customer focused, attentive to detail, and a solid communicator both verbal and written. They must have experience working with breakers, control panels, PLCs, and relays. This person should be a subject matter expert that Field Techs can lean on. So experience and aptitude in electrical installations, repairs, and service for sophisticated equipment is a must. Some travel required. -Pay for this role will range from $110k - $120k -Fully vested 401k day 1 - 100% match up to 6% of salary -2 weeks PTO day 1 -EOY bonus based on company and individual performance -Opportunities for quick growth within a rapidly growing company. First promotion expected within 2 years -Relocation available for qualified candidates #IND2

Join the world's largest HVAC company, named by Forbes as one of America's Best-In-State Employers 2025! Daikin Applied is a global leader in providing innovative HVAC solutions for commercial and industrial applications. We are currently seeking a highly motivated and detail-oriented Electrical Design Engineering Intern to join our dynamic Engineering team. This internship offers valuable hands-on experience in the field of engineering design within a leading organization. Location: Phoenix, AZ Timeline: This Internship opportunity is for May-August 2026 What's in it for you: You will have the opportunity to own a meaningful, real-life project within the Engineering Department that can directly create a positive impact on the Company's HVAC development You will join a world-class team of professionals that fosters a great place to learn, and build your network Highly competitive Intern pay An opportunity to build relationships with other students beyond your department What you will do: Prepare test and qualification plans for power electronic equipment Review test data from power electronic equipment to evaluate suitability and performance Support activities to ensure that manufacturing, construction, installation, and operation testing conform to UL safety certifications Work directly with the subassemblies of the electrical equipment supporting controls products Support activities to ensure that manufacturing, construction, installation, and operational testing conform to functional specifications and customer requirements Use computer-assisted engineering and design software and simulation to perform engineering tasks Minimum Qualifications: Junior currently enrolled in an accredited degree program in Electrical Engineering Exposure to electrical circuits and the different components Legally authorized to work in the US without sponsorship Preferred Qualifications: Exposure to some of the following electrical power components (power electronics fundamentals, variable frequency drives, induction motors, permanent magnet motors, power transformers etc.) Reside within 100 miles of our facility. The typical hourly pay rate for this position is $24/hr - $28/hr. This represents the pay range for all positions in the job grade which this position falls. Individual base pay will depend on a wide range of factors including your skills, qualifications, experience, and location. If you're looking for an engaging career with growth opportunities in a supportive environment, you'll love a career at Daikin Applied!

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? At GHD we are looking for a new Electrical Engineering Intern to join the Engineering Design team at our Phoenix, AZ office. In this role you will research, design, develop, test, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use. Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in office, three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: Contract Management: Carry out a range of contract management tasks. Engineering Inspections: Provide technical support to inspections of the quality of engineering works and/or the integrity of existing installations or structures, and the remedial works needed in accordance with organizational standards and regulatory requirements. Improvement/Innovation: Implement improvements and provide feedback on them. Use change management systems and protocols to provide routine support services. Product and Solution Development: Carry out a range of product development and engineering activities. Use established systems to analyze customer needs and define and deliver products. Project Management: Work within an established project management plan to achieve specific goals. Engineering Solutions Design: Implement feasibility testing of proposed engineering solutions, under supervision, to provide feedback and contribute to validation of the design. Engineering Standards Specification: Carry out a range of activities under the guidance of more senior colleagues to support the drafting of engineering standards and specifications and the evaluation of the effectiveness of those standards. Knowledge Management System: Help others get the most out of knowledge management systems by offering support and advice. Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. What you will bring to the Team Education Currently enrolled in an electrical engineering or equivalent Bachelor's or Master's degree program. Experience General Experience: No experience required #LI-AL1 Salary Range: $20.00 - $26.00 based on experience and location. As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? At GHD we are looking for a new Electrical Engineering Intern to join the Engineering Design team at our Phoenix, AZ office. In this role you will research, design, develop, test, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use. Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in office, three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: Contract Management: Carry out a range of contract management tasks. Engineering Inspections: Provide technical support to inspections of the quality of engineering works and/or the integrity of existing installations or structures, and the remedial works needed in accordance with organizational standards and regulatory requirements. Improvement/Innovation: Implement improvements and provide feedback on them. Use change management systems and protocols to provide routine support services. Product and Solution Development: Carry out a range of product development and engineering activities. Use established systems to analyze customer needs and define and deliver products. Project Management: Work within an established project management plan to achieve specific goals. Engineering Solutions Design: Implement feasibility testing of proposed engineering solutions, under supervision, to provide feedback and contribute to validation of the design. Engineering Standards Specification: Carry out a range of activities under the guidance of more senior colleagues to support the drafting of engineering standards and specifications and the evaluation of the effectiveness of those standards. Knowledge Management System: Help others get the most out of knowledge management systems by offering support and advice. Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. What you will bring to the Team Education Currently enrolled in an electrical engineering or equivalent Bachelor's or Master's degree program. Experience General Experience: No experience required #LI-AL1 Salary Range: $20.00 - $26.00 based on experience and location. As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

We are seeking a seasoned Field Engineer with a strong background in electrical construction to play a pivotal role in delivering complex, high-value projects. In this leadership-oriented position, you will serve as a vital technical liaison between project management, field supervision, and design teams - ensuring that construction is executed with precision, efficiency, and full compliance with all applicable codes and standards. Your expertise will directly influence project success, from pre-construction planning through final handover, contributing to best-in-class execution on projects exceeding $1M. Key Responsibilities PROJECT LEADERSHIP & COORDINATION Partner with Project Managers to achieve strategic milestones, stay within budget, and meet tight deadlines. Monitor construction progress to ensure adherence to contract specifications and schedules. Collaborate with field supervisors and subcontractors to resolve technical challenges and maintain productivity. ENGINEERING OVERSIGHT Prepare and review control estimates, installation drawings, and layout plans. Interpret and ensure adherence to engineering designs, detail sheets, and technical specifications. Lead resolution of field construction issues, discrepancies, or design interferences. TECHNICAL FIELD SUPPORT Coordinate all control & instrumentation with equipment and other trades. Establish and verify grades, working lines, and layout for contractors and field teams. Coordinate vendor shop drawings with field conditions and project drawings across all trades. Attend and contribute to coordination meetings to ensure cross-disciplinary alignment. QUALITY & DOCUMENATION Perform site surveys to validate field conditions and provide accurate documentation. Maintain and update current drawing sets, RFIs, change orders, and as-built documentation. Prepare and manage material requisitions for critical field procurement. Quality control field inspections OPERATIONAL SUPPORT Ensure labor reporting, timecard accuracy, and correct cost code use across teams. Qualifications Minimum 3+ years of experience in electrical construction, with a proven track record on large-scale water infrastructure projects ($1M+) In-depth knowledge of the National Electrical Code (NEC) and construction standards Proficiency in CAD and field engineering applications Demonstrated ability to interface with contractors, vendors, and cross-functional teams PREFERRED QUALIFICATIONS Water works Controls and Instrumentation B.S. in Electrical Engineering or related field or equal. Previous hands-on experience as a licensed Journeyman, Foreman, Superintendent, or Field Engineer Experience managing multi-trade coordination on fast-paced, complex projects WHAT WE OFFER Competitive salary and performance-based bonuses Opportunities to lead and grow within a respected organization Exposure to high-impact, technically challenging projects A collaborative and safety-first culture

Job Description We are seeking an experienced Principal Electrical Test Engineer to support the design, development, and verification of advanced spaceflight avionics systems. The ideal candidate is a hands-on engineer with deep experience in electrical test systems, ground support equipment (EGSE), hardware/software integration, and automated test development in a regulated aerospace environment. Key Responsibilities Design and develop Electrical Ground Support Equipment (EGSE) including hardware, software, and documentation Select and integrate COTS test instruments, custom test enclosures, and cabling Ensure test hardware validates all contractual and design requirements of the Unit Under Test (UUT) Support testing of avionics systems including Single Board Computers (SBCs), analog/digital I/O, C&DH systems, and Electrical Power Systems (EPS) Develop test interfaces for subsystems involving power switching, solar array switching, and battery charging Contribute to hardware design reviews and system integration efforts Develop LabVIEW VIs for instrument control, monitoring, telemetry, and user interfaces Create Python or PERL scripts for automated test execution Interface with VxWorks-based systems and support integration with embedded C code Collaborate on FPGA-related test efforts (VHDL familiarity preferred) Create and maintain schematics, cable drawings, assembly instructions, and parts lists Author formal Integration & Test Plans, Environmental Test Plans, and Acceptance Test Procedures Maintain documentation using company-controlled systems and standard tools (Visio, Excel, Word) Work cross-functionally with engineering disciplines and program teams Mentor junior engineers in test development, debugging, and execution Take ownership of schedules, deliverables, and technical outcomes Required Qualifications Bachelors degree in Electrical Engineering 7-10+ years of experience in electrical test engineering or aerospace systems testing Strong programming experience in LabVIEW, C, Python, or PERL Experience with circuit board design, electrical schematics, and cable drawings Knowledge of embedded systems and hardware/software integration Proficiency with Microsoft Office and Visio Self-driven, detail-oriented, and comfortable working in regulated environments Compensation & Benefits Competitive salary range based on experience and location Comprehensive benefits package including: Medical, dental, vision, life, and disability insurance 401(k) with company match and profit sharing Employee Stock Purchase Plan Flexible Paid Time Off and paid holidays Tuition assistance and professional development programs Hybrid work environment and strong work-life balance culture Additional Information Security Clearance Required: No U.S. Export Control Compliance: Required (U.S. persons only) Visa Sponsorship: Not available Visa Sponsorship: Not available Travel: Occasional

AmLaw 100 Firm. Was previously named "Law Firm of the Year" in Patent Law. Active at the PTAB and ITC. Collaborative work culture, with a realistic chance to make Partner. Recognized by BTI Consulting for Strong Client Relationships. REQUIREMENTS The ideal candidate will possess relevant patent preparation and prosecution experience and an undergraduate or advanced degree in electrical engineering, computer engineering, software engineering, computer science, or physics. The firm is especially interested in candidates who can draft, file, and prosecute patent applications related to graphics processing units, tensor processing units, accelerators, neural engines, and robotics circuitry and actuators. Interested candidates must possess a high level of academic achievement, solid law firm experience, and superb writing and communication skills. JD, active bar admission in the jurisdiction in which the candidate intends to practice, and admission to the USPTO are required. SUMMARY Vanguard Intellectual Partners (Vanguard-IP) specializes in the placement of IP/Patent professionals nationwide. Our sole focus on intellectual property enables us to more deeply understand our clients' technical needs, and our candidates' individual talents and career interests. Our broad network of long-term client relationships gives us a competitive edge. Our recruiters all have 10+ years of IP recruiting experience, and an exceptional record of success. We have superior knowledge of the IP job market, and offer trusted career advice for our candidates. We also have the resources and high-level contacts to get your resume noticed by the people who matter. We look forward to speaking with you, and learning more about what you are seeking in your next opportunity. CONFIDENTIALITY At Vanguard-IP, we respect the confidentiality of every candidate who contacts us. Furthermore, we will always obtain expressed authorization before submitting your resume to any of our clients. **Should you have an interest in exploring opportunities in another location, we have hundreds of openings in other markets. Please apply now and our team would be happy to review your information for this or other openings in your location of interest.

As an Advanced Hardware Engineer here at Honeywell, you will have the opportunity to design and develop cutting-edge hardware solutions that enhance the performance and reliability of our aerospace products. Your expertise will help to drive the hardware design process and ensure the delivery of high-quality systems that meet the demands of our customers in the aerospace industry. You will report directly to our Engineering Manager, and you'll work out of our Phoenix, Arizona location on a hybrid work schedule. In this role, you will impact the efficiency and effectiveness of our aerospace solutions by driving innovation and ensuring that our hardware meets the highest standards of quality and performance. At Honeywell, our people leaders play a critical role in developing and supporting our employees to help them perform at their best and drive change across the company. Help to build a strong, diverse team by recruiting talent, identifying, and developing successors, driving retention and engagement, and fostering an inclusive culture. Responsibilities KEY RESPONSIBILITIES Participate in the hardware design process, from concept to production. Collaborate with cross-functional teams to define hardware requirements and specifications. Design and develop complex hardware systems, including schematic capture and PCB layout. Perform hardware testing and validation to ensure product performance and reliability. Provide technical guidance and support to junior engineers. Stay updated with the latest industry trends and technologies. BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: click here The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: 12/18/25. Qualifications YOU MUST HAVE Bachelor's degree from an accredited institution in a technical discipline such as science, technology, engineering, mathematics. Minimum of 5 years of experience in hardware design and development. Strong knowledge of hardware design principles and methodologies. Proficiency in schematic capture and PCB layout tools. Experience with hardware testing and validation. Excellent problem-solving and analytical skills. WE VALUE Advanced Engineering degrees such as Electrical Engineering (EE) or related fields. Experience in leading hardware design projects. Ability to mentor junior engineers. Strong understanding of industry standards and best practices. Knowledge of FPGA and microcontroller-based designs. Experience with DO-160 and DO-254. Experience with TSO and PMA for aerospace products. ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high-growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here THE BUSINESS UNIT Honeywell Aerospace Technologies (AT) products and services are found on virtually every commercial, defense, and space aircraft in the world. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components and more, and connect many of them via our high-speed Wi-Fi offerings. Our solutions create healthier air travel, more fuel-efficient and better-maintained aircraft, more direct and on-time flight arrivals, safer skies and airports, and more comfortable flights, along with several innovations and services that reflect exciting and emerging new transportation methods such as autonomous and supersonic flight. Revenues in 2023 for Honeywell Aerospace Technology were $14B and there are approximately 21,000 employees globally. To learn more, please visit click here. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. Learn more about inclusion and diversity : click here Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status or have the ability to obtain an export authorization.

Evergreen Innovation Group, part of the DPR Family of Companies, is seeking an Electrical Project Engineer with 2-5 years of electrical experience in commercial construction. They will work on commercial projects within our core markets: Healthcare, Higher Education, Advanced Technology, Life Sciences, and Commercial. The Electrical Project Engineer will work closely with all members of the project team. This role is located in Surprise, AZ. Responsibilities will include but may not be limited to the following: Supervisory Responsibilities None. Duties and Responsibilities Providing construction support for Electrical systems. Participation and application of EIG's Environmental Health and Safety Plan to consistently maintain injury-free environments including performing weekly safety audits. Understanding and enforcement of contracts between EIG and Subcontractors as well as EIG and DPR. Assist the Superintendent and Project Manager in the implementation of EIG's policies and the execution of the project. Organizing the duties of other Engineers, Field Office Coordinator, Project Accountant, and other assigned project staff. This includes providing direction and prioritization. Participation in trainings and company meetings to facilitate individual and company growth. Organizing and electronically archiving project files for easy access by the project team. Preparation, monitoring, and updating project schedules. Working with the Superintendent to reduce project constraints' impact on the schedule. Preparation, maintenance, and implementation of various document control entities such as daily reports, material procurement logs, submittal logs, as-builts, testing and inspection logs, RFI logs, and change order logs. Goal-oriented approach to promptly coordinate and resolve project issues within the project team (interfacing with Designers, Engineers, and Owners). Detailed knowledge of the assigned project scopes with 100% hands on approach. Distribution of new drawings, changes, approved submittals, RFI responses, and other project information to all affected parties. Preparing agendas, documents, meeting minutes, and actions for various meetings including Owner/Architect/Contractor meetings, subcontractor coordination meetings, safety meetings, and staff meetings. Monitoring testing and inspection record and reports, safety inspection and accident logs and reports, record building permit inspections and sign-offs. Required Skills and Abilities We are looking for a flexible, detail-oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. The successful candidate will possess: Grasp of mechanical and electrical engineering concepts. Excellent listening and strong communication skills. Ability to identify and resolve complex issues. Organized work approach with the ability to adapt and adjust as required to support the project's current needs. A desire to seek out and resolve construction problems / conflicts that arise during design and construction phases. Effective participation in team environment. Proficient computer skills in Microsoft Office Suite, project management software (CMiC, Prolog or similar), scheduling software (Primavera or similar), and BIM software (AutoCAD, Revit, Navisworks or similar). A strong work ethic, a “can-do” attitude, and a passion for construction. Education and Experience 2+ years of experience as a Project Engineer, preferably within EIG's core markets. Bachelor's degree in Construction Management, Civil Engineering, or related field. Physical Requirements Prolonged periods sitting at a desk and working on a computer. Travel to and from the office as well as assigned job site(s). DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

Is the technical source of information for the project and should have a thorough knowledge of the construction documents, subcontracts, and purchase orders. Responds to questions about drawings, specifications, shop drawings, and change orders. Maintains an effective and professional working relationship with owners, architects, engineers, subcontractors, and suppliers. May assist with the supervision and/or training of Field Engineers. This position includes three 'steps' (I, II, and Senior), which provide for a progression of skill and experience. Step I is the entry level for individuals with a minimum of experience in this position. Step II is used for employees with 3 years of experience in this position, or with experience on larger and more complex projects. The 'Senior' step is used for employees with more than 6 years of experience and/or experience on significantly larger or more complex projects. Key Responsibilities 1. Demonstrates an understanding of the components of the project management plan (PMP) including the project scope management plan, procurement plan, environmental plan, time management plan, financial plan, quality management and safety plans and risk management plan to ensure successful project execution. Demonstrates a thorough understanding of the change management process. 2. Develops a procurement schedule and integrates it with the project CPM schedule. Procures necessary material and equipment. Coordinates submittals with other trades. Reviews all submittals for compliance with the contract documents. 3. Develops an understanding of the prime contract, subcontracts, purchase order agreements, and allowance items as well as contract drawings and specifications. Administers elements of the processes involved in budgeting and controlling costs so that the project can be completed within the approved budget. Demonstrates business acumen within area of responsibility. 4. Maintains "As-built" contract documents. Compiles close-out requirements, including operation and maintenance manuals, warranties, and other job specific items required by the specifications. 5. May participate in concrete form design and related equipment selection and will participates in takeoffs for concrete, asphalt concrete, earthwork, and utilities as required. 6. Plans, acquires, develops and supervises members of the project team to ensure relentless execution of the project. 7. Prepares and maintains quantity reporting mechanisms and coordinates agendas and prepares minutes for all meetings as well as maintaining various project logs. 8. Prepares and reviews change orders, including time extensions, with the appropriate personnel before submittal to the owner. Maintains the change order log and, upon receipt of executed change orders, distributes documents as required to company and subcontractor field personnel. Prepares cost control budget adjustments and executes in a timely manner. 9. Prevents claims, identify potential claims, quantify, mitigate/resolve the effects of those that do occur on a timely basis. Minimum Job Requirements 1. An advanced knowledge of construction engineering technology, codes, standards, etc., plus in depth understanding of the interdependence and relationship between other functional units, is required. 2. Four-year construction related degree or equivalent technical training and related experience, plus a minimum of three to four years of similar construction engineering experience. 3. Must possess excellent communication and interpersonal skills, plus demonstrated ability to manage a team of varied disciplines. Should have the skill/ability to supervise and/or train Field Engineer positions if so required. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. #LI-KA1

United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: We are searching for an Associate Electrical Engineer to join our team. The successful candidate will be responsible for designing, implementing, and maintaining electrical systems in a cleanroom environment, ensuring compliance with semiconductor production regulations and standards. Experience in electrical construction is highly desired. Essential Duties and Responsibilities include the following. Other duties may be assigned. Perform requirements classification of clients, communicating project requirements and design review with internal & external design team for Electrical system. Perform the required scope of work and clarify specification with stakeholders. Assist procurement team on electrical systems equipment & materials' and assist in contractors' awards. Understand isometrics, P&ID and CAD drawings specifically for electrical systems. Review, approve and oversee the installation of electrical systems. Inspect work in progress to ensure that workmanship conforms with specifications and assure adherence to construction schedules. Review progress reports, materials used and costs, contract payment application, and adjust work schedules as indicated by the reports. Review & reply RFI (Request for information) and change orders. Provide daily, weekly, and monthly reports for internal use and client communication. Identify and solve problems. Scheduling and schedule execution. Understand drawing and review specifications and estimation. Other responsibilities as assigned. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: Bachelor's degree in electrical engineering, Construction Management, or a related field. 0-3 years of experience Electrical system planning. Construction experience preferred. Semiconductor construction, a plus. Skills and Competencies: Strong understanding of high and low voltage power, lighting sockets, fire protection power, broadcasting, weak current, refuse direction indicator, grounding lightening protection system. Proficiency in Microsoft Office Suite products (Word, PowerPoint, Excel, Outlook, Teams). Ability to use engineering software, such as AutoCAD, Primavera, or others. Excellent organizational and time management skills. High level of attention to detail, and highly organized. Ability to act with integrity, professionalism, and confidentiality. Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees. Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors. Must be able to work under pressure and meet deadlines while maintaining a professional attitude. Ability to work in a construction site environment (trailer office). Language Proficiency: Effective English verbal and written communication skills required. Ability to communicate in Mandarin/Taiwanese is a plus. Ability to effectively present information and respond to questions from groups of managers, customers, and employees. Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Nice to have: Start-up experience. Verbal communication skills in Mandarin. Professional Engineer license. Additional Requirements: Must have and maintain a valid Arizona driver's license. May be required to travel to other sites within Arizona to perform certain work functions. International travel may be required. Physical Demands & Work Environment This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.

Mercury Systems is seeking a motivated and innovative Electrical Engineering Intern eager to join a focused team of engineers developing highly complex, rugged, and secure electronic packaging solutions that support our nation's warfighters and first responders. During this internship, you'll integrate directly with the MicroE team to support the development of next-generation system-in-package (SiP) designs. Job Responsibilities: * Collaborate with the SiP team to develop block diagrams, schematics, netlists, and technical documentation * Support laboratory activities, including electrical measurements, troubleshooting, and validation testing * Develop software scripts to improve team efficiency and automation * Work closely with the SiP team to learn and use advanced design tools from Ansys and Cadence * Learn and apply the fundamentals of chip-level package design Required Qualifications: * Currently enrolled in a university program pursuing a Bachelor's in Electrical Engineering or Computer Engineering * A minimum GPA of 3.1 is required. You will be asked to submit your transcripts during the review process * Solid understanding of electrical engineering fundamentals * Familiarity with electrical schematics * Experience with scripting languages such as Python or C++ * Hands-on experience with lab equipment (e.g., oscilloscopes, multimeters) * Strong verbal communication and technical documentation skills "This position requires you to be able to obtain a government security clearance. Security clearances may only be granted to U.S. citizens." Preferred Qualifications: * Prior internship, co-op, or academic project experience related to hardware design or testing Why should you join Mercury Systems? Mercury Systems is a technology company that makes the world a safer, more secure place. We push processing power to the tactical edge, making the latest commercial technologies profoundly more accessible for today's most challenging aerospace and defense missions. From silicon to system scale, Mercury enables customers to accelerate innovation and turn data into decision superiority. Headquartered in Andover, Massachusetts, Mercury employs more than 2,300 people in 24 locations worldwide. To learn more, visit mrcy.com Our Culture We are committed to making Mercury a great place to work, no matter where our employees are located. We offer a casual and enjoyable atmosphere that allows employees to learn and grow. We help and care for one another and work as one to achieve results for us and for our customers. We value communication and transparency, and strive to foster two-way dialogue at all levels of the organization. We are committed to lifelong learning, offering comprehensive skills training and tuition reimbursement. Whether you're just starting out on your career journey or you are an experienced professional, it's important to us that you feel recognized and rewarded for your contributions. To find out more about Why Mercury?, or visit the Mercury Community or find answers to general questions at Mercury FAQs Mercury Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex (including pregnancy), sexual orientation, gender identity, national origin, genetic information, creed, citizenship, disability, protected veteran or marital status. As an equal opportunity employer, Mercury Systems is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact the number below for assistance. ************** Click here read about our recent press release.

We are seeking an experienced Principal Electrical Test Engineer to support the design, development, and verification of advanced spaceflight avionics systems. The ideal candidate is a hands-on engineer with deep experience in electrical test systems, ground support equipment (EGSE), hardware/software integration, and automated test development in a regulated aerospace environment. Key Responsibilities Design and develop Electrical Ground Support Equipment (EGSE) including hardware, software, and documentation Select and integrate COTS test instruments, custom test enclosures, and cabling Ensure test hardware validates all contractual and design requirements of the Unit Under Test (UUT) Support testing of avionics systems including Single Board Computers (SBCs), analog/digital I/O, C&DH systems, and Electrical Power Systems (EPS) Develop test interfaces for subsystems involving power switching, solar array switching, and battery charging Contribute to hardware design reviews and system integration efforts Develop LabVIEW VIs for instrument control, monitoring, telemetry, and user interfaces Create Python or PERL scripts for automated test execution Interface with VxWorks-based systems and support integration with embedded C code Collaborate on FPGA-related test efforts (VHDL familiarity preferred) Create and maintain schematics, cable drawings, assembly instructions, and parts lists Author formal Integration & Test Plans, Environmental Test Plans, and Acceptance Test Procedures Maintain documentation using company-controlled systems and standard tools (Visio, Excel, Word) Work cross-functionally with engineering disciplines and program teams Mentor junior engineers in test development, debugging, and execution Take ownership of schedules, deliverables, and technical outcomes Required Qualifications Bachelors degree in Electrical Engineering 7-10+ years of experience in electrical test engineering or aerospace systems testing Strong programming experience in LabVIEW, C, Python, or PERL Experience with circuit board design, electrical schematics, and cable drawings Knowledge of embedded systems and hardware/software integration Proficiency with Microsoft Office and Visio Self-driven, detail-oriented, and comfortable working in regulated environments Compensation & Benefits Competitive salary range based on experience and location Comprehensive benefits package including: Medical, dental, vision, life, and disability insurance 401(k) with company match and profit sharing Employee Stock Purchase Plan Flexible Paid Time Off and paid holidays Tuition assistance and professional development programs Hybrid work environment and strong work-life balance culture Additional Information Security Clearance Required: No U.S. Export Control Compliance: Required (U.S. persons only) Visa Sponsorship: Not available Visa Sponsorship: Not available Travel: Occasional