Electrical engineer internship jobs in Mesquite, NV - 1,015 jobs

Qualifications: A Bachelor of Science degree in Electrical Engineering, minimum 8 years of work experience and shall be a licensed engineer (PE). Responsibilities: Individuals assigned to this classification will perform engineering calculations and must be able to layout and design systems in accordance with established policies, standards, procedures, code and shall exercise judgment in their application with minimal to no supervision. Individuals should be able to apply practical knowledge and experience in their field to resolve problems and conflicts related to the projects assigned to them. Individuals should be capable of independent decision-making for engineering tasks on the projects assigned to them. Individuals may occasionally supervise subordinate personnel or assist other engineers or designers. Knowledge of discipline specific codes and other building codes. Possess excellent verbal and written communication skills. Good leadership skills to educate client on design and other project requirements. Meet with the Project Engineer and the Project Manager to discuss the design scope, schedule, budget, phasing, site issues, and design review issues. Work with Project Manager and Project Engineer to prepare design budgets and schedules. Estimate discipline man-hours required to complete the design requirements of a project. Provide leadership and assign design job functions to designated designers and supervise their efforts in completing the project on time and within budget. Implement system types as selected by the Project Engineer and provide complete. construction documents that match the client and project team's requirements. Review preliminary and final engineering design with other disciplines for function, clearances, coordination, and final design selection. Perform a final review of the engineering drawings. Client contact. Perform quality assurance on projects in coordination with technical manager or project engineer. Mentor and motivate Engineering designers I, II and III. Set high standards, Professional integrity and seeks for the company and client best interest. Ability to meet fast-paced deadlines while maintaining quality design. Additional duties as required. Skills: Active Listening Critical Thinking Proficient in REVIT Proficient in Engineering Modeling tools Researching and writing reports/opinions. Excellent written and oral communication. Proficient in Microsoft Office tools Excellent Time Management Equipment selection Excellent judgement and decision making Excellent management of personnel resources - Motivating, developing and directing team members.

Develop Functional Requirements Documents (FRDs) and/or Project Requirements Specifications (PRS) for electrical projects and/or support the electrical component of building, utility, or equipment projects including project/task breakdowns, identification of requirements (functional, non-functional, operational requirements), and developing conceptual visualizations and illustrations of the layouts, site plans, and other perspective views to support the requirements document. FRD/PRS development includes working with integrated project teams (IPTs) and stakeholders to capture their input, research, developing using the existing process, use of existing templates and previous projects, performing FRD/PRS reviews and comment incorporation and resolution with IPT members, and finalizing the document for approvals. High voltage experience required. (function () { 'use strict'; social Share.init(); })();

HIRING NOW-EXPERIENCED FIELD STACK TESTERS FOR ALL LOCATIONS ACROSS THE U.S. Anchorage, Alaska/ Atlanta, Georgia/ Bakersfield, California/ Baton Rouge, Louisiana/ Birmingham, Alabama/ Boston, Massachusetts/ Cedar Rapids, Iowa Charlotte, North Carolina / Cypress, California/ Dallas ,Texas/ Decatur, Alabama/ Denver, Colorado/ Evansville, Indiana/ Houston, Texas/ Jacksonville, Florida Kansas City, Kansas/ Little Rock, Arkansas/ Minneapolis, Minnesota/ Vancouver, Washington/ Philadelphia, Pennsylvania/ Phoenix, Arizona Pittsburgh, Pennsylvania/ Roanoke, Virginia/ Salt Lake City, Utah/ St. Louis, Missouri/ Syracuse, New York and Tampa Florida. Duties & Responsibilities: Support Stack Emissions Testing Operations Conduct onsite stack emissions testing, using proven competencies with wet chemistry and instrumental sampling methodologies Assist to Train and mentor Project Scientists (Field Technicians) on field procedures, test methods, calibrations, etc. using Alliance standardized training materials Motivate the team, and ensure productivity Supervise and reviews equipment calibrations for pivots, control modules and nozzles Assists with pricing and deliverables (proposal/test plans/reports) review Serves as the company's representative to interface with customers and regulatory (EPA) personnel Uphold the highest standards of data quality & ethics Requirements: Must have experience leading stack emissions testing projects in the field. Preferred experience with, client interface, safety leadership, data collection, quality initiatives and timely deliverables to the clients Specific knowledge of instrumental and wet chemistry equipment operation, troubleshooting and calibration required Flexibility to work 40+ hours per week as well as some overnight stays & travel will be required. Consistent standing or walking, bending, crouching, or stooping, climbing ladders and/or stairs, frequent lifting of objects weighing up to 50 pounds. Must be able to distinguish between shades of color Excellent communication skills (internally and with Clients and Regulators) with professional demeanor. Must maintain positive attitude with ability to work well in groups and desire to achieve goals and grow into higher positions of leadership. Valid driver's license Employee Benefits: Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this role can average between $60,000-$100,000 annually. The total compensation can include base salary, and bonus plans. The individual for this role must have hands-on experience as a field stack tester preferably with QSTI certifications in methods 1-4. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Morrow-Meadows Corporation is seeking a full time Field Engineer. The primary objective of the Field Engineer is to support the Foremen and General Foremen with administrative tasks that will allow the field supervisors the opportunity to spend more of their time in the field supporting the electricians working on their crews. Field Engineer is an entry-level opportunity for candidates who demonstrate a strong desire for a career in Project Management, Electrical Engineering or Construction Management. Responsibilities: Update and maintain as built/record drawings in our electronic document control system Assist Foreman/Safety Engineer with new hire paperwork, orientation, and video Distribute all mail to the Foreman to include copying or emailing scheduled updates etc. Assist material handler with filing and follow-up paperwork such as backorders Assist QA/QC Manager with filing Manage Nevada State license list for journeymen and training numbers for anyone that applies Assist with timekeeping duties for field employees Track tool orders, tool returns, damaged tools and stolen tools Complete daily job journals with input from Foreman Assist with any manual checks and termination slip(s) and send all information to payroll Requirements: Trade related education or industry related experience preferred Excellent computer skills - proficient in Microsoft Office suite Strong organizational skills Self-starter who will offer their skills to improve the documentation processes A good attitude and the ability to work in a team environment Strong communication skills Dependable Benefits: Competitive compensation packages Medical and Dental Benefits Basic Life Insurance Long Term Disability Insurance Flexible Spending Account Wellness Program 401-K Plan that matches up to $6,000 per employee annually 8 paid holidays Your birthday as a paid holiday 3-4 weeks paid vacation/personal time off depending on years of employment Morrow-Meadows Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. The salary range for this position is: $21.00-$30.00/hour. Compensation offered may vary based on work location, experience, qualifications, specialty, training, and market and business considerations, among other factors.

The Opportunity QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. The Role At QuidelOrtho, we're advancing the power of diagnostics for a healthier future for all . Join our mission as our next Field Engineer I in the Reno, NV area. This is a field-based position that offers a company car, gas card, cell phone and laptop, and all vehicle maintenance will be covered by QuidelOrtho. This field based position covers customers throughout the Reno, NV area. The Responsibilities We are seeking a qualified individual who has experience installing, operating, maintaining, repairing, and modifying electromechanical equipment, preferably in the field. Troubleshoot technical problems and systems issues. Determine technical solution in accordance with product and customer specifications and recommends actions to company or customer representatives for coordinative product solution. Conducts technical analysis of product implementations, modifications, and enhancements to product in accordance with specific customer specifications and implementations. This position will also require the individual to assess Customer needs and recommends solutions in accordance with product specifications and Customer Specifications. Conducts technical training and product briefing with customers, vendors and company representatives as needed. Act as local on-site representative to customer's organization. Manage all territory responsibilities including Preventive Maintenance & upgrades including software & hardware. This position requires the individual to provide service support in the hospital/clinic laboratory environment. Responsible for individual parts management, online training, and administrative expense reporting. Perform other work-related duties as assigned. The Individual Candidates should be aware that the Company currently requires customer-facing workers to meet Customer Credentialing requirements which may include but are not limited to, up to date immunizations. The Company is an equal opportunity employer and will provide reasonable accommodation to those unable to be vaccinated where it is not an undue hardship to the company to do so as provided under federal, state, and local law. Required: Education: Minimum of an Associate's degree in Electronics or Electrical/MechanicalEngineering, or equivalent 4 years of military or field service experience required. Experience: Minimum 4 years experience installing, operating, maintaining, repairing, and modifying electromechanical equipment, preferably in the field, required. A team player that is self-motivated & interacts appropriately with peers, sales counterparts, and customers is required. The ability to organize and express ideas clearly, verbal and written, in individual or group situations. Possess appropriate technical knowledge and have the ability to utilize that knowledge to effectively perform required job functions with an effective level of competence demonstrating a high degree of knowledge in electro-mechanical, chemistry, computer and/or other related disciplines. Ability to effectively manage assigned workload within allotted time constraints. Must have the ability to lift 75 lbs. A valid driver's license is always required. Extended hours may be required Travel: Ability to travel overnight 50-75% to Rochester, NY, in the first few months of training. Post-training must be able to travel up to 75% around territory, with occasional overnight travel (1-2 nights per week). This position is not currently eligible for visa sponsorship. Preferred: Experience within Healthcare or Medical Device industry The Key Working RelationshipsInternal Partners: Field Service: Field Engineer I, Senior Field Engineers, Area Service Engineers, Regional Service Managers, Area Service Directors Sales: Area Sales Directors, Account Managers, Strategic Account Executives, Business Development Managers, Channel Sales Managers Technical Specialists, Field Application Specialists, Area Technical Specialists, Technical Support Specialists Interacts with other aspects of the organization as required (e.g., Finance, HR, IT, Customer Service, etc.) External Partners: Customers including but not limited to Laboratory Managers, Supervisors. The Work Environment Typical work hours with overtime required in a outside field engineer environment. Must have the discipline, organization skills and self-motivation to work autonomously in a home office environment. Must maintain a valid driver's license and must own and maintain an automobile suitable for travel to customer sites, airport, etc. Travel includes airplane, train, automobile, and overnights. On a typical workday, 80% of time meeting with people, 20% of the time on computer, doing paperwork, or on phone. The Physical Demands Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. While performing the duties of this job, regularly required to use hands to finger, handle, or feel and talk or hear. Frequently required to stand, walk, bend, twist, reach and sit. Occasionally required to reach, kneel, squat, or balance. Must be physically able to travel up to 75%.Must maintain a valid driver's license and must own and maintain an automobile suitable for travel to customer sites, airport, etc. Travel includes airplane, train, automobile, and overnights. Must be able to lift up to 75 pounds. Salary Transparency The salary range for this position takes into account a wide range of factors including education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on the facts and circumstances of each case. The salary range for this position is $65,000 to $85,000 and is bonus eligible. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time) and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. Equal Opportunity QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform the duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at #LI-CG1 #LI-Remote

Instrumentation & Controls (I&C) Engineer - PE Required Full-Time | On-Site | Semiconductor Industry | Multidiscipline A&E Firm We are seeking an experienced Instrumentation & Controls (I&C) Engineer with a Professional Engineer (PE) license to join our growing multidisciplinary Architectural & Engineering team. This role will focus heavily on semiconductor facility projects and requires deep technical expertise, strong coordination skills, and the ability to deliver high-quality engineering packages within a fast-paced project environment. The ideal candidate is proactive, detail-oriented, and comfortable working collaboratively with electrical, mechanical, process, and structural teams to support highly complex facility systems. Key Responsibilities Instrumentation & Controls Design Develop complete I&C design packages, including P&IDs, control narratives, loop diagrams, wiring diagrams, instrument indices, panel layouts, and I/O lists. Select, size, and specify instrumentation for systems such as ultrapure water, specialty gases, chemical distribution, HVAC, and process utilities. Create sequences of operation (SOO) and develop detailed control logic aligned with client requirements. Design and integrate control system architectures including PLC, DCS, SCADA, BMS, and EMS platforms. Prepare technical specifications and engineering documents for construction and permitting. Project Coordination Collaborate with multiple engineering disciplines to ensure complete and coordinated system designs. Participate in design reviews, model coordination meetings, and constructability sessions. Provide direction to CAD/Revit designers for instrument placement, routing, and system integration. Project Execution Prepare and seal engineering drawings and documents using a valid PE license. Assist with scope development, cost estimates, and proposal preparation for I&C project components. Review vendor submittals and shop drawings for compliance with project requirements. Field Support & Commissioning Provide on-site support including installation verification, calibration oversight, loop checks, and functional testing. Troubleshoot instrumentation and control system issues during construction and commissioning. Support development of punch lists and resolution of technical issues in the field. Quality, Codes & Standards Ensure all designs comply with ISA, SEMI, NEC, NFPA, IEEE, and applicable local codes. Maintain documentation integrity and support internal standards development. Client Interaction Attend client meetings and design presentations as needed. Communicate technical information clearly to clients, project managers, and multi-discipline teams. Provide timely updates and proactively identify project risks or design changes. Required Qualifications Bachelor's degree in Electrical Engineering, Mechanical Engineering, Chemical Engineering, or related field. Active Professional Engineer (PE) license (required). 5-10+ years of relevant engineering experience, preferably in semiconductor or advanced manufacturing environments. Strong knowledge of instrumentation, controls, automation systems, and semiconductor facility processes. Proficiency with I&C design tools, loop diagrams, P&IDs, instrument databases, and control system architecture. Understanding of ISA standards, NEC, NFPA, and SEMI requirements. Excellent communication, coordination, and problem-solving skills. Preferred Qualifications Experience with tool install projects, process utilities, and advanced semiconductor facilities. Experience working with PLC, DCS, SCADA, BMS, and EMS control platforms. Familiarity with AutoCAD, Revit, and instrumentation design software. Experience supporting commissioning, startup, and troubleshooting activities. Industrial Design offers full benefits including Health/Dental/Vision insurance (single and family), PTO, Paid Holidays and 401k. Affirmative Action/EEO statement - Industrial Design recruits, hires, employs, trains, promotes, and compensates individuals based on job-related qualifications and abilities. Industrial Design is an equal opportunity employer and values diversity. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other status protected by law. Applicants please note: This position requires US work authorization, and we are not looking for out of country/outsourced support or remote workers of any kind. This opening is for local candidates residing in the metro phoenix area or those willing to self-relocate to this area only. All positions listed are full time in office roles with no opportunity for hybrid or work from home accommodations. If you are looking to work remote, please do not apply.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: NoneTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman is a space pioneer, supporting government, civil and commercial customers in solving their biggest challenges. Our forward-leaning, innovative spirit is backed by a legacy of expertise that began at the dawn of the space age. Our mission experience in space runs deep, we know our customers well, and our capabilities are unmatched. This is what allows us to provide reliable, agile and affordable space solutions to best serve our customers. From defending freedom to advancing human discovery, we are defining what is possible in space every day. An internship at Northrop Grumman is unique. Sure, you'll learn new skills, explore our enterprise, network with experts, connect with thought leaders, and finish with a resume that opens doors. But you'll gain something even more valuable: pride in what you've done. Join us and launch your career. We'll support you with training, employee resource groups, and our shared vision of global security. Northrop Grumman is seeking Electrical Engineers for an internship opportunity. This position will be located at our Space sector in Chandler, AZ. The qualified candidate will become part of Northrop Grumman's Launch Vehicles business group. Roles and Responsibilities The candidate will serve as an Integration and Test Electrical Engineer Intern for one of our launch vehicle programs, requiring the candidate to function in a dynamic multi-disciplinary environment. Daily responsibilities may require direct contact with launch vehicle flight hardware and electrical ground support equipment. Specific duties may include: Performing hands-on electrical testing at a systems level Maintaining procedures for the assembly and test of launch vehicle systems Incorporating hardware and/or software design changes Documenting & dispositioning hardware discrepancies, pursuing root cause & corrective actions Constant and timely communication with other team members Basic Qualifications A candidate must meet ALL of the below criteria. The candidate must: Be a student who is enrolled full-time and pursuing an undergraduate or graduate degree from an accredited college/university and will be enrolled full time in Fall 2026 Be majoring in Electrical Engineering or a related field Be available to work full-time (40 hours per week) for at least 10 weeks during summer 2026. Be able to obtain and maintain a U.S. Government security clearance (U.S. citizenship is a pre-requisite) as well as Program Special access within a reasonable period of time, as determined by the company to meet its business needs (U.S. citizenship is a pre-requisite) Ability to lead out at solving problems and driving all tasks to completion Ability to work at a fast pace, while multi-tasking, and still communicate effectively Ability to work in a team environment, and lead small projects or teams Preferred Qualifications: Have an overall cumulative GPA of 3.00/4.0 or higher Hands-on electrical testing and diagnostic experience Experience with aerospace standards/guidelines Experience working with operational hazards such as propulsive devices, pressurized systems, overhead lifting, and high voltage systems Intern Pay Range: Bachelor's: $18.75 to $34.50 per hour Master's: $27.00 to $42.50 per hour At Northrop Grumman, our internship pay rates are standardized and take into account three main factors: the anticipated graduation date of the individual, the cost of labor of the geographic location, and whether the internship is considered technical or administrative. campusjobs Primary Level Salary Range: $1.00 - $1.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Overview:Marathon Petroleum Corp. (MPC) offers internship and co-op opportunities to high-performing college students who want meaningful hands-on experiences in their fields of study. The following core values guide MPC's approach to doing business: safety and environmental stewardship; integrity; inclusion; collaboration; and excellence. Interns/co-ops work side-by-side with experienced professionals as contributing members of diverse work teams who create value for the company's shareholders. MPC believes that how we conduct our business is just as important as the bottom line. About the Logistics & Storage (L&S) Organization:The Logistics & Storage organization is the link between the Refining and Marketing components of Marathon. L&S transports crude oil and refined products to and from the refineries and onto storage terminals for distribution to retail marketing facilities, via pipelines and marine transportation operations. Logistics & Storage is comprised of four primary components: Logistics & Storage Engineering (L&SE) - L&SE provides engineering design and project management services to Terminals, MPL, and Marine. Terminals - Terminals play a prominent role in enhancing life's possibilities by blending, distributing, and delivering quality products in a safe, reliable, and competitive manner. Marathon Pipe Line Company (MPL) - MPL operates pipeline systems that move crude oil from production fields, other pipeline companies, and offshore platforms to MPC refineries, other refineries, and other pipeline systems. MPL also operates pipeline systems that move refined products from refineries to product terminals. Marine - Maintains and operates a large private inland petroleum products barge fleet, which is used to ship crude oil, intermediates, and refined products. Responsibilities:The purpose of the Logistics and Storage intern/co-op program is to identify and develop future technical and leadership talent for the benefit of MPC, the engineering intern/co-op, and the engineering profession. The intern/co-op program may consist of any number of work sessions. Multiple sessions give interns/co-ops the ability to rotate between the different L&S components in order to gain exposure to the various business segments and to offer a variety of assignments with increasing responsibility. Intern/Co-ops will gain experience in the 5 phases of the Marathon Project Management Process (MPMP) including Conceptual, Feasibility, Definition, Implementation, and Start-up/Close-out. Other responsibilities may include: + Development of project scope + Engineering oversight + Technical design + Cost estimating + Schedule development + Evaluating and summarizing bid sets + Construction supervision + Safety leadership + Coordination with operations groups + Project documentation + Travel ranges from 15-45% Qualifications: + Candidates must be pursuing a Bachelor's degree in Civil, Electrical, or Mechanical Engineering. + Concurrent enrollment in a Bachelor's degree seeking program for the duration of the experience. + Strong academic performance. + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Availability to work 40 hours per week. + Positions are available Spring, Summer, and Fall semesters. + Availability for multiple work terms is preferred. + Many projects will require travel to construction sites; therefore, a valid driver's license is required. + Military experience a plus. + MIN - $32.92 per hour / MAX - $41.67 As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Additional locations: Salt Lake City, Utah Job Requisition ID: 00018573 Location Address: 539 S Main St Education: Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ************************* .The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

Mercury Systems is seeking a motivated and innovative Electrical Engineering Intern eager to join a focused team of engineers developing highly complex, rugged, and secure electronic packaging solutions that support our nation's warfighters and first responders. During this internship, you'll integrate directly with the MicroE team to support the development of next-generation system-in-package (SiP) designs. Job Responsibilities: * Collaborate with the SiP team to develop block diagrams, schematics, netlists, and technical documentation * Support laboratory activities, including electrical measurements, troubleshooting, and validation testing * Develop software scripts to improve team efficiency and automation * Work closely with the SiP team to learn and use advanced design tools from Ansys and Cadence * Learn and apply the fundamentals of chip-level package design Required Qualifications: * Currently enrolled in a university program pursuing a Bachelor's in Electrical Engineering or Computer Engineering * A minimum GPA of 3.1 is required. You will be asked to submit your transcripts during the review process * Solid understanding of electrical engineering fundamentals * Familiarity with electrical schematics * Experience with scripting languages such as Python or C++ * Hands-on experience with lab equipment (e.g., oscilloscopes, multimeters) * Strong verbal communication and technical documentation skills "This position requires you to be able to obtain a government security clearance. Security clearances may only be granted to U.S. citizens." Preferred Qualifications: * Prior internship, co-op, or academic project experience related to hardware design or testing Why should you join Mercury Systems? Mercury Systems is a technology company that makes the world a safer, more secure place. We push processing power to the tactical edge, making the latest commercial technologies profoundly more accessible for today's most challenging aerospace and defense missions. From silicon to system scale, Mercury enables customers to accelerate innovation and turn data into decision superiority. Headquartered in Andover, Massachusetts, Mercury employs more than 2,300 people in 24 locations worldwide. To learn more, visit mrcy.com Our Culture We are committed to making Mercury a great place to work, no matter where our employees are located. We offer a casual and enjoyable atmosphere that allows employees to learn and grow. We help and care for one another and work as one to achieve results for us and for our customers. We value communication and transparency, and strive to foster two-way dialogue at all levels of the organization. We are committed to lifelong learning, offering comprehensive skills training and tuition reimbursement. Whether you're just starting out on your career journey or you are an experienced professional, it's important to us that you feel recognized and rewarded for your contributions. To find out more about Why Mercury?, or visit the Mercury Community or find answers to general questions at Mercury FAQs Mercury Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex (including pregnancy), sexual orientation, gender identity, national origin, genetic information, creed, citizenship, disability, protected veteran or marital status. As an equal opportunity employer, Mercury Systems is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact the number below for assistance. ************** Click here read about our recent press release.

Redwood is localizing a global battery supply chain that seamlessly integrates recovery, reuse, and recycling - keeping critical minerals in circulation and driving the energy transition. Founded in 2019, we're delivering low-cost and large-scale energy storage and producing battery materials in the U.S. for the first time, all from batteries we already have. Essential Duties: Redwood Materials is currently recruiting motivated and accomplished Electrical Engineering interns to join our Facilities team for Summer 2026. These roles are at the center of our activities focused on creating a sustainable circular economy for lithium-ion batteries by transforming recycled materials into battery materials for new lithium-ion battery production. Responsibilities Will Include: Perform electrical assignments with general direction and supervision. Support the development of construction drawings for low voltage (up to 600V) power distribution, one-line diagrams lighting, lighting control, electrical circuits, raceway, grounding, data and communications. Assist in the development of design standards and templates for the electrical engineering department. Assist in maintaining electrical equipment tracker through purchasing, delivery, storage, and installation. Perform site visits to document construction progress and ensure compliance with design drawings. Desired Qualifications: Pursuing a degree in Electrical Engineering or equivalent. Passed or planning to take Fundamentals of Engineering (FE) exam, Engineer-in-Training (EIT) certification is a plus. Prior internship or work experience at another firm. Ability to read electrical drawings, single line diagrams, and electrical circuit schedules. Familiarity with using REVIT MEP for electrical design. Familiarity with using Navisworks to view and create clash-free design. Proficiency in using Bluebeam to review, add markups, and create sessions. Prior experience or interest in using SKM to perform short-circuit, arc flash, and circuit breaker coordination study. Self-motivated, hands-on mindset, with a willingness to contribute at all levels. A passion for sustainability and making the world a better place! Physical Requirements: Ability to safely perform job duties in both office and production environments. Must be able to lift and carry up to 50 lbs. as needed. Must maintain regular and punctual attendance in alignment with company and regulatory standards. Must be able to communicate clearly. Working Conditions: Split work environment between office and the production facility. Work may involve extended periods of working in the production facility. Ability to work in challenging working conditions which may include exposure to noise, dust, chemicals, and temperature extremes, while protected by PPE, for extended periods of time. The location of the internship is in the Reno, Nevada area (exact location is based on team placement). Interns are responsible for making their own housing and transportation arrangements. Please note that due to the location of our campuses, public transit options are limited, and the use of a personal or rented vehicle is recommended. The position is full-time. Compensation will be commensurate with experience. We collect personal information (PI) from you in connection with your application for employment with Redwood Materials, including the following categories of PI: identifiers, personal records, professional or employment information, and inferences drawn from your PI. We collect your PI for our purposes, including performing services and operations related to your potential employment. If you have additional privacy-related questions, please contact us at privacy@redwoodmaterials.com.

When applicable, Bombardier promotes flexible and hybrid work policies. Why join us? At Bombardier, we design, build and maintain the world's peak-performing aircraft for the world's most discerning people and businesses, governments and militaries. We have been successful in setting the highest standards by putting our people at the heart of it all, and defining excellence, together. Working at Bombardier means operating at the highest level. Every day, you are part of a team that delivers superior experiences and products, pushing the boundaries of what's possible in our industry and beyond. By prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms, because the best work happens when you are free to be yourself and share your unique expertise. What are your contributions to the team? * Prepare necessary documents to support the modification of Bombardier aircraft such as wire diagrams, functional test plans and reports, technical requirement documents, electrical load analysis and design compliance reports. * Research specification for component selection. Coordinate with suppliers to ensure specifications are met. * Assist service center personnel in investigating, troubleshooting, and resolution of build/modification and test issues * Work in a team environment How to thrive in this role? * You will be pursuing an Electrical of other suitable engineering degree at accredited university * You will have familiarity with AutoCad * You will be proficient with MS Office (MS Word, Excel, Power Point, Teams, Outlook). * You must be a self-starter and able to handle multiple initiatives effectively. * You must exhibit excellent written and interpersonal communication skills. * You should be an organized individual, able to work effectively with a variety of cross-functional individuals, departments and organizations with a general good attitude and disposition. Now that you can see yourself in this role, apply and join the Bombardier Team! Bombardier is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by Federal, National, or Local Laws. Job Electrical Engineer Intern Primary Location Learjet Inc., Tucson 3050 Organization Learjet Inc Shift Any Shift Employee Status Temporary Requisition 10548 Electrical Engineer Intern

LotusWorks is an Engineering Services provider specializing in managing Commissioning, Construction Services, Calibration, Operations & Maintenance scopes of work within global manufacturing facilities. LotusWorks operates globally across EMEA and North America partnering with the world's leading manufacturers across the Semiconductor, Pharmaceutical & Biologics, Medical Device and Data Centre sectors. Our team of Engineering and Technical professionals is immersed in cutting-edge technologies and innovations. LotusWorks is committed to a diverse and inclusive workplace, integral to our people-first approach. A very exciting opportunity to work with and learn all facilities equipment and operations! As an Engineering Intern at LotusWorks, you will have the opportunity to work closely with our experienced engineering commissioning team and gain practical knowledge in the field of engineering. This internship is a fantastic opportunity for soon-to-be graduates and recent graduates with a bachelor's degree with an engineering discipline to kickstart their careers. Responsibilities: Shadowing and working alongside our team of experienced commissioning engineers. Witnessing and participating in FAT of all utility systems and equipment required to start up and maintain a clean room fabrication plant. Collaborate with commissioning engineers and other professionals to complete assigned tasks. Assist with research, data analysis, and report writing. Participate in training and development opportunities to enhance your skills and knowledge. Any other duties or responsibilities that may be assigned to you in your role. Skills Required: Strong academic background with a solid understanding of engineering principles. Strong knowledge of PC and MS Office applications, SQL, Python Coding, Smartsheets are ideal. Excellent problem-solving skills and a willingness to learn. Effective communication skills, both written and verbal. Ability to work well in a team and independently. Attention to detail and a strong commitment to safety. No prior work experience is required; academic projects would be a plus. Education / Licenses / Certifications Current undergraduate student pursuing a bachelor's degree majoring in Electrical Engineering graduating in December 2025 is required. Recent college graduates with a bachelor's degree majoring in the above, are strongly encouraged to apply. Proof of education, licenses, and certifications will be required where applicable. LotusWorks is an equal opportunity employer and prohibits discrimination and harassment of any kind. We are committed to creating a diverse and inclusive workplace where all employees feel valued, respected, and empowered.

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? At GHD we are looking for a new Electrical Engineering Intern to join the Engineering Design team at our Phoenix, AZ office. In this role you will research, design, develop, test, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use. Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in office, three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: Contract Management: Carry out a range of contract management tasks. Engineering Inspections: Provide technical support to inspections of the quality of engineering works and/or the integrity of existing installations or structures, and the remedial works needed in accordance with organizational standards and regulatory requirements. Improvement/Innovation: Implement improvements and provide feedback on them. Use change management systems and protocols to provide routine support services. Product and Solution Development: Carry out a range of product development and engineering activities. Use established systems to analyze customer needs and define and deliver products. Project Management: Work within an established project management plan to achieve specific goals. Engineering Solutions Design: Implement feasibility testing of proposed engineering solutions, under supervision, to provide feedback and contribute to validation of the design. Engineering Standards Specification: Carry out a range of activities under the guidance of more senior colleagues to support the drafting of engineering standards and specifications and the evaluation of the effectiveness of those standards. Knowledge Management System: Help others get the most out of knowledge management systems by offering support and advice. Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. What you will bring to the Team Education Currently enrolled in an electrical engineering or equivalent Bachelor's or Master's degree program. Experience General Experience: No experience required #LI-AL1 Salary Range: $20.00 - $26.00 based on experience and location. As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? At GHD we are looking for a new Electrical Engineering Intern to join the Engineering Design team at our Phoenix, AZ office. In this role you will research, design, develop, test, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use. Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in office, three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: Contract Management: Carry out a range of contract management tasks. Engineering Inspections: Provide technical support to inspections of the quality of engineering works and/or the integrity of existing installations or structures, and the remedial works needed in accordance with organizational standards and regulatory requirements. Improvement/Innovation: Implement improvements and provide feedback on them. Use change management systems and protocols to provide routine support services. Product and Solution Development: Carry out a range of product development and engineering activities. Use established systems to analyze customer needs and define and deliver products. Project Management: Work within an established project management plan to achieve specific goals. Engineering Solutions Design: Implement feasibility testing of proposed engineering solutions, under supervision, to provide feedback and contribute to validation of the design. Engineering Standards Specification: Carry out a range of activities under the guidance of more senior colleagues to support the drafting of engineering standards and specifications and the evaluation of the effectiveness of those standards. Knowledge Management System: Help others get the most out of knowledge management systems by offering support and advice. Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. What you will bring to the Team Education Currently enrolled in an electrical engineering or equivalent Bachelor's or Master's degree program. Experience General Experience: No experience required #LI-AL1 Salary Range: $20.00 - $26.00 based on experience and location. As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

A client of Sharp Decisions is looking for a junior Electrical Engineer. This role is ONSITE in Tucson, AZ, a 12-month contract with possible extension, W2 only. * Applies intensive and diversified knowledge of design principles, practices and implementation in complex systems and assignments. * General responsibilities include design concept generation, participating in design reviews, development and testing to assess performance against design specification, reliability testing, and assessment of system interactions. * Makes independent decisions. Assist in the development of manufacturing processes and troubleshooting issues to determine root cause and possible engineering solutions. Key Responsibilities * Learns to use company concepts, policies and procedures, familiar with and follows standard practices. * Normally receives detailed directions on all work. * Makes suggestions to improve work processes. Assists in reducing to practice patentable inventions. * Works on projects of moderate scope in which analysis of situation or data requires a review of identifiable factors. Exercises judgment within defined procedures and practices to determine appropriate action. * Participates in technical team activities. * Presents and discusses data within group. * Monitors work to ensure quality, and continuously promote Quality First Time. * Other duties as assigned by management. Education * Bachelor's Degree in Engineering; preference for an Electrical Engineering degree Experience * Entry-level engineering position * 2 years of related experience preferred

SummaryIntergalactic, now a part of Unison, a GE Aerospace Company, is a team of engineers, technologists, designers, mathematicians, and problem solvers committed to a singular idea: reviving the no-boundaries mentality in aerospace. We are a team of the nation's best, regardless of where we live. The AI&T (Assembly Integration & Test) Electrical Test Engineer will lead and mentor test technicians in all aspects of testing the electronics of Intergalactic's aerospace systems and components. Ensuring a high standard of test execution against system requirements, delivering and fielding quality hardware and systems., and Additionally aiding the programs on all strategic, contractual, and tactical milestones from program inception to the delivery of contracted intellectual and physical product to the customer. The Electrical / Electronic Test Engineer fosters overall system quality by developing and being accountable for both component and system test plans, procedures, and test result analysis. In cooperation with the Program and AI&T Management team, the Electrical / Electronic Test Engineer will lead program test campaigns. This role is responsible for the technical development and execution of tests as the primary testing point of contact on assigned programs.Job Description Roles and Responsibilities: Read and accurately interpret customer requirements and design test plans, acceptance testing procedures, and qualification testing procedures to adequately prove system performance, margins of safety, durability, quality, etc. Lead, support and administer electronic tests and testing requirements on high value assets/hardware. (May Include vibe, shock, TVAC, and all other MIL-Std and NASA standard testing) Verification and validation testing. HALT testing Take initiative to clarify uncertainties, and in cooperation with engineering and other technical staff, resolve and/or correct issues as appropriate. Able to operate machines, hand tools, power tools, and refrigerant equipment in an aerospace AS9100 environment. Setup and operate a wide range of precision calibrated electronics tools such as power supplies, osciliscopes electronic loads and function generators. Support engineering with diagnosis and troubleshooting, of component level to full system level builds. Support engineering with various component and flight vehicle check outs, including acceptance tests. Support payload handling and integration operations that include handling of spacecraft assemblies. Operate material/hardware handling equipment including - but not limited to - hoists, lifts, tugs, and other ground support equipment as required. Perform assembly and system checkouts on ground support equipment related to all program testing, including all spacecraft operations. Support root cause analysis and implement corrective action. Consistently apply written, verbal, listening, and visual media skills as appropriate to ensure accurate communication. Proactively identify issues and problems and make recommendations. Consistently take ownership of and responsibility for personal and team performance to promote continuous improvement. Review and acknowledge internal document control, Coord Memos, SOP's. Available to travel to testing sites, customer facilities, and testing events. Coordinate and collaborate with crew members to accomplish set tasks and perform other duties as assigned. Required Qualifications: Bachelor's Degree in Electrical Engineering or related field. 3 years of experience in Electrical Test Engineering with basic coding/scripting experience (preferably in MATLAB or Python). Minimum 1 year of basic CAD experience (preferably in Altium or electrical design SW). Willingness to travel up to 25% Desired Characteristics: Bachelor's Degree preferably in Electrical Engineering with designing, analyzing, testing, integrating, qualifying, and fielding products experience. Knowledge and experience with steady state and dynamic system modeling and architecting high level controls. Basic CAD experience (preferably in Altium). Working knowledge of key aerospace technical disciplines including electrical systems, system controls, embedded controls, development testing and analysis, qualification analysis and testing. Understanding of aerospace requirements management methodologies and processes - traceability, verification, and validation. Functional understanding of major aircraft systems: environmental control systems, powerplant, electrical, hydraulics, controls, avionics, power generation, and structures. Creative innovation. GE Aerospace will not sponsor individuals for employment visas, now or in the future, for this job opening. This position is on-site in St. George UT #LI-RS1 This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Insight Global is seeking a junior electrical engineer to join our team for an exciting opportunity to work on a unique government contract. The contract assists in acquisition and technical sustainment engineering and will augment government resources. As a Nuclear Hardness Junior Electrical Engineer, you will work on a high-performing team to provide engineering, technical, and administrative expertise to the government to maintain their nuclear hardness program in accordance with requirements detailed in Department of Defense, United States Strategic Command, and Air Force directives, manuals and instructions, ensuring the weapon system remains a reliable and effective nuclear deterrent. Nuclear hardness is defined as the ability of a system or any of its elements to withstand exposure to one or more effects of a hostile nuclear environment. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements Committed to results and success in accomplishing goals, as well as a fast learner with demonstrated ability to quickly learn technology and understand unique system requirements. Ability to sit on-site at Hill AFB in Clearfield, UT Demonstrated proficiency with Microsoft Office products, including Word, Excel, and PowerPoint Eligible candidates must be able to acquire a U.S. Government Secret security clearance College-level courses (or similar) experience in: Fundamentals or Theory of Electricity & Magnetism, Electromagnetics & Transmission Lines, Numerical Techniques in Electromagnetics, Antenna Theory and Design, Microwave Engineering, Wireless Communication Systems, Introduction to Semiconductor Physics, Radiation Effects on Electronics and Semiconductors, and Power System Design highly desired. Emphasis in software or computer science is not desired. Bachelor or Master of Science degree in Electrical Engineering, Electronic Engineering, or Physics from an ABET-accredited school, with zero (0) years of experience. Familiarity with Electromagnetic Interference (EMI) / Electromagnetic Compatibility (EMC) / Electromagnetic Pulse (EMP) and Electrical Systems Integration. Familiarity with military technology and technical data. Proficiency in MATLAB and/or experience with Spice or Microcap or similar circuit modeling software desired. Experience in design or test to verify models. Active Secret Clearance

General Purpose Performs a variety of skilled technical tasks related to the engineering of various power projects for Hurricane City. Conducts power system designs that are development related. Work involves application of technical knowledge and independent judgment in design, drafting, use of CAD software, use of GIS software, use of electrical system modeling software, preparation of right-of-way and legal descriptions, field management, construction, and inspection work. Supervision Received Works under the general supervision of the Power Director. Essential Functions - (Essential functions, as defined under the Americans with Disabilities Act, may include the following tasks, knowledge, skills, and other characteristics. The list of tasks is illustrative only and is not a comprehensive listing of all functions and tasks performed by positions in this class.) Perform distribution and transmission design, provide transmission and substation project support, as well as a variety of other tasks as assigned by the Power Director Help develop and implement effective load forecasting models for future capacity projects Help to create system design, construction, and material standards Provide procurement support and bid evaluation for purchases on designed projects Review material supplier drawings, submittals, and coordinate between vendor design and project drawings Design and plan for system expansion, improvement projects, system protection, and coordination studies Maintains project databases, drawings, maps, easements, and rights of way Attends meetings and reviews plans submitted to the JUC (Joint Utility Committee) Meets with developers, engineers, and contractors. Helps prepare power designs based on those meetings Prepare engineering drawings and maps using various computer software Preform basic electrical calculations to determine correct electrical equipment sizing, Transformers, conductors, etc. Ensures that project designs and plans comply with codes, City standards, and engineering principles Performs related duties as required Minimum Qualifications B.S. degree in Engineering from accredited institution, preferably with a power option Engineering experience which includes overhead transmission, distribution, and substation planning, analysis, calculations, and design Working knowledge and understanding of IEEE, NESC, ANSI standards Technical writing skills necessary to prepare design documentation and specifications Ability to communicate effectively and professionally with internal teams and customers regarding technical requirements Ability to prepare technical presentations, project schedules, and project progress reporting Must have strong computer skills and have advanced proficiency with various types of engineering software Familiarity with GIS and mapping tools. Utah P.E License in Electrical Engineering. Experience: At least 5 years of field experience in one or all of the following: industrial power systems design, service entrance, feeder and branch circuits, lighting, emergency power, and power distribution equipment is desired. Experience in project engineering, project management, and construction supervision is desired. Knowledge, Skills, and Abilities Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Knowledge of principals involved in strategic planning, resource allocation, leadership technique, and production methods. Knowledge of pertinent federal and state laws and regulations; engineering economics and project management techniques; budget administration. Operation of computer, phone, tablet. Use of business applications such as word processing and spreadsheets. Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Ability to analyze, interpret and apply information, choose among alternative courses of action and arrive at a recommendation. Understand and implement laws, regulations, policies and procedures; communicate effectively, both orally and in writing. Maintain detailed and accurate records. Prepare clear and concise written reports including technical material for nontechnical audiences. Advocate for the City's interests. Establish and maintain collaborative working relationships with all levels within the City, regulatory, other agencies, special interest groups, and the public The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, walk, talk, or hear. The employee is occasionally required to use hands to finger, handle, feel or operate objects, tools, or controls; and reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, crouch or crawl. Typical Physical/Mental Demands/Working Conditions Incumbent of the position performs in a typical office setting with appropriate climate controls. Tasks require variety of physical activities, sitting or standing for extended periods while assisting customers and while operating assigned office equipment. Walking, standing, stooping, sitting, reaching and light lifting. Talking, hearing and seeing essential in the performance of daily tasks. Common eye, hand, finger dexterity exist. Mental application utilizes memory for details, verbal instructions, emotional stability and critical thinking. Considerable exposure to stress as a result of human behavior, including dealing with unpleasant, angry or discourteous individuals as part of the job requirements. Condition of Employment Employee may be required to work extended or irregular hours such as nights, weekends and holidays. Hurricane City employment can require employees to occasionally work outside of their normal job duties to assist with city sponsored events and/or projects. The employee is expected to forgo normal work duties to assist with the completion of these events and/or projects. In the event of an emergency, employees are required to work to provide for the safety and well-being of the public, including the delivery and restoration of vital services. Please Note: The above statements are intended to describe the general nature and level of work being performed by the person(s) assigned to this job. They are not intended to be an exhaustive list of all duties, responsibilities and skills required of personnel so classified. The approved class specifications are not intended to and do not infer or create any employment, compensation, or contract rights to any person or persons. This updated job description supersedes prior descriptions for the same position. Management reserves the right to add or change duties at any time. Hurricane City is an Equal Opportunity Employer.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As an Electrical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Electrical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Electrical Engineering co-ops and interns enter into the following positions: Electrical & Instrumentation (E&I) Project Engineers work on a variety of real-world electrical and instrumentation projects in a refinery setting. During your time at MPC, you will develop and utilize project management skills including scope alignment, cost and schedule development, and teamwork through multiple engineering phases. You will also support the area teams. We are committed to developing engineers into professional project managers who successfully manage projects of all sizes. Reliability Electrical & Instrumentation (E&I) Engineers troubleshoot Electrical & Instrumentation issues at the refinery. As a reliability intern, you will help analyze failures of equipment, develop solutions for recurring equipment difficulties, submit Project Request Forms (PRF's) to implement solutions, and understand equipment maintenance strategies. There will be opportunities to use electrical analysis software to solve coordination issues and run Arc Flash studies for the power system, as well as learning and understanding about how our critical Refinery Safety Instrumented Systems (SIS) are applied. Process Control / Technical Service Engineers can work on a wide array of projects in support of the process control systems installed throughout the refinery and products movements areas. The process control systems in the refinery provide real-time control and data acquisition functions in support of operating the refinery process and electrical equipment. Typical college co-op assignments include the following: troubleshooting system power supply problems, control system programming, hardware and software lifecycle replacement projects, installing and troubleshooting communication networks and monitoring control system performance metrics. Qualifications: + Candidates must be majoring in Electrical Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.31 per hour / MAX - $40.89 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018188 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez, California, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Part time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.