Electrical engineer internship jobs in North Dakota - 176 jobs

The Data Center Engineering Analytics and Modeling (DCEAM) organization is seeking a Power Systems Engineer to lead grid to rack electromagnetic transient (EMT) simulations for AI data centers. You will develop detailed MV/LV power system models from the utility source through the IT load to analyze transient performance, harmonic distortion, protection, grounding, and UPS-generator interactions. These models will be used to ensure power quality, stability, and reliability across all operating modes. You will support projects from site selection and design through commissioning and integrated systems testing (IST), working closely with design, operations, vendor, and utility teams. **Responsibilities** **Responsibilities** + Develop & Maintain EMT Models: MV sources; transformers (saturation/inrush); grounding; cables; UPS/DRUPS; generators (AVR/governor); STS/ATS; Busway/PDU/RPP; filters/FACTS; VFD-driven HVAC. + Conduct Dynamic Performance and Transient Studies: Generator-UPS Compatibility; Large block load step (GPU ramp-up) response; Transformer inrush and load transfer; Generator start and transfer sequences; UPS input/output switching and bypass events; Black Start; Frequency Stability; Rotor-Angle Stability; Voltage Stability / Voltage Ride Through. + Conduct Power Quality Studies: Flicker / Voltage Step Analysis; Harmonic / Resonance scans and filter application; Inrush / Ferroresonance; Converter Limited Fault Behavior; Power Factor Correction. + Conduct Steady-State Analysis: Load flow / Voltage Drop; Short Circuit / Equipment Evaluation; Protection & Coordination; Arc Flash Hazard Analysis; Grounding Study + Support generator and UPS vendor coordination for paralleling, synchronization, and control system stability. + Generate FMU models for multi-domain simulations + Establish modeling standards, libraries, QA, version control; automate cases, sweeps, and reporting. + Review vendor black-box models; document assumptions and deliver clear, actionable reports. + Ensure compliance with internal security, data handling, and licensing policies for tools and models. + Collaborate with cross-functional teams (mechanical, controls, commissioning, etc.) to ensure electrical system stability under dynamic load profiles. + Author study reports and technical memos for design review and operational readiness. **Minimum Requirements** + BS in Electrical Engineering (power systems or power electronics); 3-5+ years EMT studies. + Proficiency in one or more: PSCAD/EMTDC, EMTP-RV, PowerFactory (EMT), ATP-EMTP, Simulink/Simscape. + Experience modeling UPS/inverters and synchronous generators; transformer saturation/inrush. + Knowledge of protection basics, grounding, harmonics, converter controls (PLL, current/voltage loops). + Ability to interpret one-lines, settings, control block diagrams, and test data. + Scripting for automation/data analysis (Python, MATLAB, or similar). + Familiarity with standards: IEEE 519, IEEE 1453/IEC 61000-4-15, IEC 61000 series, NEC/NFPA 70 or IEC 60364, IEEE C37. **Preferred Qualifications** + PhD/MS in Power Systems/Power Electronics or equivalent experience. + Professional Engineer (PE) license or eligibility (Electrical, Power discipline) + Data center design/operations (UPS topologies, STS transfers, generator paralleling, coordination). + Familiarity with AI/GPU rack power modeling, DC bus design, and bipolar bus applications. + Real-time/HIL (RTDS, OPAL-RT/HYPERSIM, Typhoon HIL) and hybrid RMS-EMT workflows. + Advanced harmonic/resonance mitigation (active/tuned filters, STATCOM/SVC). + Protection engineering for converter-rich systems and low-fault-current scenarios. + Experience with Git-based model governance and reproducible reporting. + Understanding of battery energy storage systems (BESS) and lithium-ion UPS topologies. + Knowledge of Microgrid architectures, and Distributed Energy Resources (DER); including their control strategies, operational modes (grid-forming, grid-following, islanded, and parallel operation), and integration with critical data center electrical infrastructure. + Knowledge of NEC 700/701/708 critical power distribution requirements. + Experience working with OEM data (Eaton, Schneider, ABB, Vertiv, Cummins, MTU). + Vendor model acquisition/validation under NDA; understanding of licensing/IP. Disclaimer: **Certain US customer or client-facing roles may be required to comply with applicable requirements, such as immunization and occupational health mandates.** **Range and benefit information provided in this posting are specific to the stated locations only** US: Hiring Range in USD from: $97,500 to $199,500 per annum. May be eligible for bonus and equity. Oracle maintains broad salary ranges for its roles in order to account for variations in knowledge, skills, experience, market conditions and locations, as well as reflect Oracle's differing products, industries and lines of business. Candidates are typically placed into the range based on the preceding factors as well as internal peer equity. Oracle US offers a comprehensive benefits package which includes the following: 1. Medical, dental, and vision insurance, including expert medical opinion 2. Short term disability and long term disability 3. Life insurance and AD&D 4. Supplemental life insurance (Employee/Spouse/Child) 5. Health care and dependent care Flexible Spending Accounts 6. Pre-tax commuter and parking benefits 7. 401(k) Savings and Investment Plan with company match 8. Paid time off: Flexible Vacation is provided to all eligible employees assigned to a salaried (non-overtime eligible) position. Accrued Vacation is provided to all other employees eligible for vacation benefits. For employees working at least 35 hours per week, the vacation accrual rate is 13 days annually for the first three years of employment and 18 days annually for subsequent years of employment. Vacation accrual is prorated for employees working between 20 and 34 hours per week. Employees working fewer than 20 hours per week are not eligible for vacation. 9. 11 paid holidays 10. Paid sick leave: 72 hours of paid sick leave upon date of hire. Refreshes each calendar year. Unused balance will carry over each year up to a maximum cap of 112 hours. 11. Paid parental leave 12. Adoption assistance 13. Employee Stock Purchase Plan 14. Financial planning and group legal 15. Voluntary benefits including auto, homeowner and pet insurance The role will generally accept applications for at least three calendar days from the posting date or as long as the job remains posted. Career Level - IC4 **About Us** As a world leader in cloud solutions, Oracle uses tomorrow's technology to tackle today's challenges. We've partnered with industry-leaders in almost every sector-and continue to thrive after 40+ years of change by operating with integrity. We know that true innovation starts when everyone is empowered to contribute. That's why we're committed to growing an inclusive workforce that promotes opportunities for all. Oracle careers open the door to global opportunities where work-life balance flourishes. We offer competitive benefits based on parity and consistency and support our people with flexible medical, life insurance, and retirement options. We also encourage employees to give back to their communities through our volunteer programs. We're committed to including people with disabilities at all stages of the employment process. If you require accessibility assistance or accommodation for a disability at any point, let us know by emailing accommodation-request_************* or by calling *************** in the United States. Oracle is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veterans' status, or any other characteristic protected by law. Oracle will consider for employment qualified applicants with arrest and conviction records pursuant to applicable law.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As an Electrical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Electrical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Electrical Engineering co-ops and interns enter into the following positions: Electrical & Instrumentation (E&I) Project Engineers work on a variety of real-world electrical and instrumentation projects in a refinery setting. During your time at MPC, you will develop and utilize project management skills including scope alignment, cost and schedule development, and teamwork through multiple engineering phases. You will also support the area teams. We are committed to developing engineers into professional project managers who successfully manage projects of all sizes. Reliability Electrical & Instrumentation (E&I) Engineers troubleshoot Electrical & Instrumentation issues at the refinery. As a reliability intern, you will help analyze failures of equipment, develop solutions for recurring equipment difficulties, submit Project Request Forms (PRF's) to implement solutions, and understand equipment maintenance strategies. There will be opportunities to use electrical analysis software to solve coordination issues and run Arc Flash studies for the power system, as well as learning and understanding about how our critical Refinery Safety Instrumented Systems (SIS) are applied. Process Control / Technical Service Engineers can work on a wide array of projects in support of the process control systems installed throughout the refinery and products movements areas. The process control systems in the refinery provide real-time control and data acquisition functions in support of operating the refinery process and electrical equipment. Typical college co-op assignments include the following: troubleshooting system power supply problems, control system programming, hardware and software lifecycle replacement projects, installing and troubleshooting communication networks and monitoring control system performance metrics. Qualifications: + Candidates must be majoring in Electrical Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.31 per hour / MAX - $40.89 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018188 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez, California, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Part time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

We put the unity in "opportunity" Opportunity Snapshot: Compensation: $89.00/hour Work Schedule: M-F / 40 hours+ Assignment Duration: Long term, 12 months + Benefits: Comprehensive insurance with 401K, PTO and Holidays Responsibilities Evaluate and comment on discipline engieering work performed both internally and by Contractors and subcontractors to ensure that work is being executed in accordance with project specifications, company standards, and regulatory requirements Facilitate and coordinate discipline engineering technical work products Coordination and communication of various issues among the company's and contractor's engineering team that affect the discipline engineering design, safety, and regulatory compliance of the work Evaluate / comment work performed by the Contractor and sub-contractors to insure that the work is being executed in accordance with project specifications, company standards, and regulatory requirements. Includes review of discipline design drawings and documents Identify and assess deviations to Contract Technical Specifications and regulatory requirements; ensure that such deviations will be processed according to project procedures; maintains Deviation Control Log Steward discipline engineering queries from the Contractor and sub-contractors as well as technical information requests Keep Lead Engineer or Engineering Manager informed of discipline engineering progress, deviations, and execution concerns Participate in discipline engineering reviews at Contractor's and subcontractor's locations Drives and promotes capital efficiency in engineering design Support internal engineering general interest or Global Practice initiatives as requested by Supervisor Qualifications Bachelor's degree in Electrical or Mechanical Engineering or related engineering specialty required 10+ years experience in Instrumentation & Controls, and Electrical (Low and Med voltage) Professional Engineering license is preferred Experience with I&E design engineering, construction, and commissioning effort Automation and control with Uncon O&G facilities experience Familiar with NEC Code, ISA Standards Experience with Project Management Broad knowledge of discipline design standards, specifications, codes, and appropriate safety criteria Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities Proficient in Microsoft Office suite of software programs Read, write, and speak fluent English, especially as it applies to technical and business communications The Bergaila Way: The Bergaila Companies is a nationally recognized leader in providing staffing services to all sectors of the energy industry. We continually focus on partnering with talented professionals, engineering the perfect fit between our clients and employees. Choosing a career path with Bergaila grants you immediate access to nationally recognized organizations we partner with. Bergaila consistently attracts and retains its Employees with our dedicated internal service team, top tier benefits programs for contractors and their families, and commitment to place you in the desired career of your choice. Client Overview: Our Client is an American energy company operating principally in the U.S. and Canada, that specializes in the drilling and production of unconventional oil and natural gas assets. Our client has a reputation for efficient resource development, environmental stewardship and community involvement, with a drive to meet the growing challenges of the domestic natural gas industry.

Ideal Aerosmith is a leading supplier of precision inertial guidance test systems, flight motion simulators, innovative defense solutions in support of the warfighter, and a premier provider of aerospace test engineering services, ATE system engineering, and quality contract manufacturing services to the aerospace industry. We're experts and we earn that title everyday with our customers through innovative engineering, manufacturing, and sustainment of world-class motion and electric test solutions and services. Here, we don't just solve complex problems - we redefine what's possible. Every role at Ideal Aerosmith supports a lean culture through continuous improvement - ongoing, incremental enhancements to products, processes, or services aimed at reducing waste and boosting efficiency, customer service, and performance. With a team of skilled problem solvers and a culture that thrives on tackling challenges head-on, we are dedicated to our clients' success. Enjoy competitive benefits, a supportive work environment, and every other Friday off to recharge. The Electrical Engineer II independently contributes to the design, development, and integration of Ideal Aerosmith's unmanned systems, Unmanned Aerial Vehicles (UAVs) and Unmanned Surface Vehicles (USVs). This role requires a solid understanding of electrical system design, component selection, and system-level tradeoffs. The engineer operates with limited supervision and takes ownership of defined subsystems from concept through testing. The ideal candidate demonstrates sound engineering judgment, strong problem-solving skills, and an ability to balance performance, cost, and manufacturability. Job Responsibilities Design and develop electrical subsystems for UAVs and USVs, including power distribution, control electronics, and communication interfaces. Generate detailed schematics, wiring diagrams, and electrical specifications. Select electrical components considering performance, cost, availability, and environmental requirements. Support system integration, ground testing, and flight testing activities. Develop and execute test plans to validate electrical performance and reliability. Collaborate with cross-functional teams to resolve integration challenges. Identify technical risks and propose mitigation strategies. Support supplier interactions related to electrical components and assemblies. Qualification Requirements Bachelor's degree in Electrical Engineering, Electronics Engineering, or a related field. 3+ years of electrical engineering experience in complex systems. Ability to travel (domestic and internationally). Must have valid driver's license and ability to obtain a passport. Due to federal contract requirements, candidates must be U.S. citizens, lawful permanent residents, or protected individuals as defined by 8 U.S.C. §1324b(a)(3). Skill Requirements Strong understanding of power distribution and grounding practices. Experience with embedded electronics, avionics, or control systems. Familiarity with sensors, radios, and communication protocols. Proficiency with electrical CAD and simulation tools. Ability to troubleshoot and resolve system-level electrical issues. Effective communication and collaboration skills. Physical Requirements Must have the ability to lift and/or carry 45 lbs. Ability to work for extended periods at computer workstation/keyboard. Ability to type accurately and efficiently. The position will require walking, standing, squatting, crouching, stooping, lifting, climbing, pulling, pushing, sitting, repetitive motion and kneeling. Ideal Aerosmith is an equal opportunity employer committed to fostering a diverse and inclusive workplace. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or any other characteristic protected by law. Our goal is to create a work environment that celebrates diversity and inclusion, where all employees feel respected and valued. We encourage applications from all qualified individuals and strive to provide equal employment opportunities to everyone.

is located at our Headquarters location in Bismarck, ND.** is open to varying levels of experience.** This position is responsible to perform detail duties relating to long-term contractual transmission delivery and ancillary services, member load and generator interconnections, Western co-supply power deliveries and North American Electric Reliability Corporation (NERC) compliance reporting. This position reviews and maintains Basin Electric Power Cooperative's (BEPC) portfolio of generation and load metering for the various Basin Electric metering arrangements with RTOs, transmission providers' tariff, bilateral agreements, and the membership agreements. The incumbent provide solutions in accurately measuring Basin Electric's loads and generation across a multiple transmission providers and regions. This position performs services agreements, engineering and economic analysis, inventory, maintenance planning, reporting, specifications and standards in multiple RTO markets and Balancing Areas. This position applies standard practices and principles to specific situations; evaluates, selects, and applies standard engineering techniques, procedures, and criteria using judgement in making minor adaptations and modifications. **ESSENTIAL DUTIES** + Responsible for implementing, maintaining and accurately reporting the long-term transmission delivery services and ancillary service arrangements of BEPC's member power requirement needs. Implements the acquisition of long-term power transmission/wheeling/ancillary service resources through active interaction with transmission providers' transmission tariffs and transmission Open Access Same-Time Information System (OASIS). Determine the optimum long term Cooperative's transmission/ancillary service portfolio for maximizing the Cooperative's ability to serve load obligations, assessing availability and cost of transmission utilized in power supply planning and understanding/interpreting the rules promulgated by MRO, WECC, NERC, NAESB, MISO, SPP, RMR and FERC regarding accreditation issues and transmission access. Effectively maintain, report, and submit BEPC's NERC and RTO compliance activities related to long-term transmission delivery services and ancillary services. + Responsible to implement and communicate the BEPC Member's load interconnection process associated with Member's interconnections with SPP, MISO or other transmission providers as necessary for BEPC and Member's new load interconnections. Implement and maintain the BEPC loads by delivery point and provide accurate load data to transmission service providers and long-term planning models. Accurately implements and maintains the BEPC/Western co-supplied Membership load Pnode/EPnode loads split percentage to the SPP and MISO network models. + Responsible for maintaining a successful BEPC facility credit process as developed with the applicable Member's transmission facilities. Effectively work and communicate with Member's, SPP, MISO and other transmission providers in understanding and implementing procedures and processes. + Assist with supporting the development of strategies in the furtherance of the cooperatives near and long-term business objectives and for providing a centralized enterprise-wide view to address and develop strategies for the future success of the business to benefit the Cooperative and its member/owners. + Develop and maintain the Basin Electric's Meter policy, including requirements and specifications, and economically budgeting and performing cost allocation reporting of the installation, operating and maintenance of meter inventory. + Maintain and calculate meter electrical attributes, including transformer and transmission line loss compensation calculations and other electrical engineering calculations, of load and generation meters. + Develop and maintain Basin Electric's Metering Services Agreements with Members, RTOs and other industry counterparts as required. + Economically coordinate and maintain with Engineering and Transmission System Maintenance on meter attributes programming, installation and annual meter calibration maintenance on meter inventory and reporting. + Troubleshoot Member Revenue meter issues and develop engineering solutions to accurate measure loads and generation. Read electrical-one lines and understand electrical specifications. + Evaluate and report, on an as-needed basis, with consultants, members, transmission providers on the technical and economic conditions supporting the various member power supply deliveries, resource expansions and interconnections, long-term power sale/purchases, and completion of required regulatory filings. + Understand Open Access Transmission Tariff (OATT) principles and FERC open-access regulations impacting transmission service administration, ancillary service management, and tariff compliance. + Provide analytical support, including data collection, interpretation, and reporting to inform business decisions. + Synthesize complex data sets into actionable insights and present findings clearly to stakeholders. + Perform other duties as assigned. **MINIMUM QUALIFICATIONS** + Bachelor's degree from an Engineering Accreditation Board/Accreditation Board for Engineering and Technology (EAC/ABET) accredited electrical engineering program. + 6 years of related electrical engineering experience in the electric utility industry. + A valid driver's license. + Occasional travel required. **This position is identified as a Critical Infrastructure Protection (CIP) related position, which may involve physical and/or logical access to Bulk Electric System (BES) cyber-related assets or systems. This position may involve access to privileged information relating to such assets or systems. Applicants for this position will be required to meet applicable CIP eligibility requirements to be hired, and employees in this position must strictly adhere to all Basin Electric policies, procedures, and programs applicable to CIP requirements.** **PREFERRED QUALIFICATIONS** + A Professional Engineering (PE) registration. **PHYSICAL AND ENVIRONMENTAL DEMANDS** This position requires frequent sitting and standing/walking; and occasional reaching below and above shoulder level, use of keyboard/computer, bending, kneeling, lifting/carrying up to 10 pounds, and pushing/pulling up to 20 pounds. It also requires finger dexterity and hand coordination. This position requires good hearing and vision, and the ability to speak. **KEY SKILLS** + Knowledge of electrical engineering and operations. + Proficient with Microsoft Office Suite. + Proficient Excel skills, including formulas, pivot tables, charts, and data analysis tools (e.g., VLOOKUP, INDEX/MATCH, Power Query, or Power Pivot). + Good written and verbal communication skills. + Ability to develop plans, procedures and goals; present information to others; and work under stress to complete projects within deadlines. + Knowledge of Open Access Transmission Tariffs. Basin Electric wants all interested and qualified candidates to apply for employment opportunities. If you are an applicant with a disability who is unable to use our online tools to search and apply for jobs, or who needs other assistance or accommodations, please contact us at ************. Please indicate the specifics of the assistance needed or provide your contact information, and a Basin Electric Human Resources representative will contact you. Basin Electric is an Equal Employment Opportunity Employer regarding race, color, religion, sex, sexual orientation, gender identity, national origin, disability, and veterans status.

**The 'Apply with SEEK option' will be utilized for International applicants, mainly Australia. If this does not apply to you please use the 'Apply' option.** IF YOU CARE, THERE'S A PLACE FOR YOU HERE EFI Global is a full-service engineering, fire investigation, environmental, health and safety, and specialty consulting services firm serving a variety of industries in both the public and private sectors. Over the last four decades, we have grown from a boutique firm specializing in handling insurance fraud and arson cases and providing expert witness testimony, into a recognized global leader in engineering failure analysis, origin-and-cause investigations, environmental consulting, laboratory testing and specialty consulting. Our forensic investigation, engineering and environmental services teams around the world share a dedication to expertise, quality and demonstrating to customers that caring counts . Each of our more than 700 professional engineers, fire investigators, architects and scientists was selected for their technical proficiency, in-depth industry knowledge and commitment to professional integrity. Together, our diverse backgrounds and collective insights empower clients to make better-informed business decisions. EFI's combination of global solutions and local expertise has earned the firm a reputation for delivering timely responses that consistently meet our clients' expectations-anytime, anywhere. Click here to learn more about EFI Global. **PRIMARY PURPOSE** **:** To be responsible for the profitably of investigating events, systems, devices, and/or failures and providing expert opinions. **With a robust background in electrical engineering and a keen expertise in forensic analysis, this professional will bring a wealth of experience investigating electrical failures, diagnosing complex troubleshooting scenarios, and assessing incidents related to power distribution and generation. Adept at analyzing intricate circuitry, evaluating arc flash events, and understanding the nuances of lightning strikes and electrical fires, they are skilled in identifying root causes and devising comprehensive solutions. Their comprehensive knowledge of electrical components and systems, paired with a meticulous approach to both preventative and reactive engineering, ensures reliable performance and insightful evaluations across a wide spectrum of electrical challenges. Candidate must hold P.E. license in resident state.** **PRIMARY PURPOSE** **:** **To be responsible for profitably, ethically and scientifically investigating events, systems, devices and/or failures and providing expert opinions; to provide guidance and leadership on complex engineering assignments.** **Are You An Ideal Candidate? We are looking for enthusiastic candidates who thrive in a collaborative environment, who are driven to deliver results, are customer oriented and naturally empathetic.** **Apply your engineering knowledge and experience to investigate and assess complex failures in the context of an energetic, people focused, entrepreneurial culture.** **Deliver comprehensive engineering analyses to clients who represent virtually every industry and comprise some of the world's most respected organizations.** **Leverage EFI Global's broad, global network of experts to both learn from and to share your insights.** **Be a part of a rapidly growing, industry-leading global company known for its excellence and customer service.** **Take advantage of a variety of professional development opportunities that help you perform your best work and grow your career.** **Enjoy flexibility and autonomy in your daily work, your location, and your career path.** **Access diverse and comprehensive benefits to take care of your mental, physical, financial, and professional needs.** **ESSENTIAL FUNCTIONS and RESPONSIBILITIES** **Provides guidance and leadership to newer colleagues and/or those with less experience on complex engineering assignments.** **Surveys property, casualty and liability losses, typically at residential and commercial buildings and loss scenes.** **Conducts investigations to determine the root cause of events and failures.** **Works closely with engineers and investigators to produce detailed reports, drawings, and/or outline the cause and origin of losses and damages. ** **Develops plans, reports and drawings to meet client's needs and/or determine and document the failure analysis and causation of failures.** **Provides expert testimony in a court of law and/or in depositions.** **Determines applicable engineering practices to fulfill the prescribed scope of work, project specifics, timelines, and cost estimates for the professional services provided.** **Documents and maintains billable hours on a time and expense basis for failure analysis and engineering projects for clients.** **Collaborates with sales and operations managers, architects, developers, insurance adjusters, claims managers and attorneys to develop demand for your professional services.** **Collaborates with EFI's national team of forensic experts to leverage experiences and assist on projects.** **ADDITIONAL FUNCTIONS and RESPONSIBILITIES** **Performs other duties as assigned.** **Supports the organization's quality program(s).** **QUALIFICATIONS** **Education & Licensing** **Bachelor's degree from an accredited college or university required.** **Professional Engineering (PE) license is required.** **Experience** **Eight (8) years of experience or equivalent combination of experience and education required including two (2) years of engineering experience specifically in failure analysis and forensic engineering plus 2 years in insurance and/or risk management services industry.** **Skills & Knowledge** **Excellent oral and written communication** **PC literate, including Microsoft Office products** **Analytical and interpretive skills** **Strong organizational skills** **Excellent interpersonal skills** **Ability to work independently or in a team environment** **Ability to meet or exceed Performance Competencies** **WORK ENVIRONMENT** **When applicable and appropriate, consideration will be given to reasonable accommodations.** **Mental** **: Clear and conceptual thinking ability; excellent judgment and discretion; ability to handle work-related stress; ability to handle multiple priorities simultaneously; and ability to meet deadlines** **Physical** **:** **Must be able to stand and/or walk for long periods of time.** **Must be able to kneel, squat or bend.** **Must be able to work outdoors in hot and/or cold weather conditions.** **Have the ability to climb, crawl, stoop, kneel, reaching/working overhead,** **Be able lift/carry up to 50 pounds** **Be able to push/pull up to 100 pounds.** **Be able to drive up to 4 hours per day.** **Auditory/Visual** **: Hearing, vision and talking** **NEXT STEPS** **If your application is selected to advance to the next round, you will receive an e-mail notification or phone call from a recruiter to schedule an initial call.** Always accepting applications. _As required by law, Sedgwick provides a reasonable range of compensation for roles that may be hired in jurisdictions requiring pay transparency in job postings. Actual compensation is influenced by a wide range of factors including but not limited to skill set, level of experience, and cost of specific location. For the jurisdiction noted in this job posting only, the range of starting pay for this role is $115,000-$165,000_ _. A comprehensive benefits package is offered including but not limited to, medical, dental, vision, 401k and matching, PTO, disability and life insurance, employee assistance, flexible spending or health savings account, and other additional voluntary benefits. Always accepting applications._ Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, the San Diego Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, the California Fair Chance Act, and all other applicable laws. The statements contained in this document are intended to describe the general nature and level of work being performed by a colleague assigned to this description. They are not intended to constitute a comprehensive list of functions, duties, or local variances. Management retains the discretion to add or to change the duties of the position at any time. Sedgwick is an Equal Opportunity Employer and a Drug-Free Workplace Our business is founded on people with the best technical skills and outstanding industry knowledge and we strive to employ and retain exceptional talent. EFI Global is an equal opportunity employer welcoming applications from all qualified persons. If you are interested in working for us, please visit our job board.

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $63,795 to - $164,301 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0855 Electronics Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857056-0855-CYBER Control number 852987000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Use engineering manuals, standard publications, and technical material to obtain information and pertinent data for use by higher level engineers, contractors and/or customers. * Keep abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments. * Perform duties in support of the installation, operations, and maintenance of weapon systems, subsystems, facilities, machinery, and/or support equipment. * Perform developmental assignments in the application of established principles, techniques, methods, and procedures of professional electronics engineering in the area of installation, operations, and maintenance. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: At least one year of specialized experience equivalent to at least the GS-09 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Modeling and simulation professional theories, concepts, principles, techniques, and practices of computer engineering, electronics engineering and/or computer science. GS-12: At least one year of specialized experience equivalent to at least the GS-11 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Leading and/or performing engineering work involving electronic circuits, circuit elements and equipment systems; applying a number of diverse electronics engineering practices, techniques and processes to identify and resolve complex engineering issues; supporting the planning, testing and troubleshooting of electronics engineering systems or devices; and, developing computer aided engineering analysis and tools in support of planning and designing applications. GS-13: At least one year of specialized experience equivalent to at least the GS-12 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-14: At least one year of specialized experience equivalent to at least the GS-13 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-15: At least one year of specialized experience equivalent to at least the GS-14 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of electronics engineering concepts, principles, methods, techniques, and standard engineering practices to perform moderately difficult or relatively limited phases of a larger and more complex installation, operations, and maintenance engineering project. * Knowledge of computer aided design and drafting (CADD) programs to perform design and drafting assignments, as well as other computer applications used in support of plans, analysis, and project reports. * Skill in applying the principles, concepts, and practices of the occupation sufficient to perform limited assignments in the field of electronics engineering. * Ability to communicate factual and procedural information clearly, orally and in writing. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

Responsible for placing safety as #1 priority in day to day work routine for self and others. Currently looking for an Electrical Engineer to join our team to support the Electric Distribution System for a mid-sized utility company. • Design, Develop, Support, and Maintain, the Electric Distribution System. • Troubleshoot and find solutions for system issues MINIMUM QUALIFICATIONS Engineer I: ($73,460 - $91,830) A Bachelor of Science degree in an engineering discipline. Engineer II: ($84,460 - $105,570) A Bachelor of Science degree in an engineering discipline; and Two years related work experience. Engineer Sr: ($117,780 - $147,230) A Bachelor of Science degree in an engineering discipline; and Seven years of progressively responsible experience and understanding in the energy industry utility electric and gas operations, maintenance, design and project management. PREFERRED QUALIFICATIONS Level I/II/Sr: Prior engineering experience in electric utility. An EI (Engineering Intern or EIT (Engineering in Training) Certificate Level Sr: Professional Engineering (P.E.) designation JOB RESPONSIBILTIES I: Applies basic engineering techniques for entry-level assignments with review and guidance from a higher level II: Applies standard engineering methods and techniques to solve problems. Moderate guidance and direction provided. Work is normally reviewed from a high level. Sr: Applies a broad range of engineering skills and techniques, leads projects, and provides direction to lower-level engineers. ADDITIONAL REQUIREMENTS Ability to apply engineering principles to the development and design of the electric utility system. Strong technical writing and verbal communication skills. Must be able to effectively communicate, correspond and interact with staff/management and field personnel. Must take all measures necessary to protect networks, devices, programs and data from cyber-attack, damage or unauthorized access. Required to maintain a valid driver's license. Moderate travel requirements (25%). Must be legally authorized to work in the United States, no sponsorships considered. Subject to pre-employment drug testing and background checks. Application Deadline: 01/26/2026 @ 11am CST To view our comprehensive and competitive benefits package, click here. Energizing Lives for a Better Tomorrow

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S. with nationally recognized expertise in sustainable, high performance building engineering. We are a collaborative, competitive, innovative, and energetic group of engineers and team leaders who incorporate a holistic approach towards consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose personalities lead them to excellence, and we provide exceptional opportunities for our employees. **Design with Purpose. Lead with Impact. Grow with CMTA.** CMTA, a Legence company, is seeking a Senior Electrical Engineer to join our growing team. If you're passionate about designing energy-efficient, high-performance buildings and want to make a real impact in communities across healthcare, education, and commercial sectors, this is your opportunity. As a Senior Electrical Engineer, you'll lead the design and coordination of electrical systems that power the spaces where people live, learn, work, and heal. You'll work with a collaborative team on projects from concept through construction, and you'll play a key role in mentoring staff, engaging with clients, and delivering innovative solutions that drive sustainability and performance. **What You'll Do** + Lead the design of electrical systems: power distribution, lighting, emergency power, UPS, fire alarms, security, communications, and renewable energy systems. + Oversee all project phases from design and documentation to bidding, construction, and commissioning. + Collaborate with clients, architects, and engineers to ensure seamless integration and code compliance. + Provide mentorship and technical leadership to junior engineers. + Review submittals, conduct site visits, and support construction administration. + Contribute to project management and business development efforts. **What You Bring** + Bachelor's degree in Electrical or Architectural Engineering. + 7+ years of experience in MEP design (Healthcare, K-12, Higher Ed, or Commercial projects preferred). + PE license (or ability to obtain). + Proficiency in Revit, AutoCAD, and applicable design software. + Strong knowledge of NEC, energy codes, ANSI/TIA, BICSI, and electrical design standards. + Excellent communication, leadership, and time management skills. + Passion for innovation, sustainability, and continuous learning. **Why CMTA?** + Purposeful Work: Be part of a mission-driven team designing sustainable, energy-efficient buildings. + Career Growth: Advance your career with mentorship, leadership opportunities, and hands-on project ownership. + Collaboration: Work in a team-first environment that values respect, transparency, and knowledge-sharing. + Impact: Contribute to high-performance projects that improve lives and communities across the country. If you're ready to lead innovative projects, grow your career, and make a difference- **CMTA is ready for you.** **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based on relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. No sponsorship is available for this position. **About Legence** Legence, a _Blackstone Portfolio Company_ , is North America's leading, integrated provider of energy efficiency and sustainability solutions for the built environment. Legence improves the performance of buildings, making the spaces that shape our lives healthier and more sustainable. We specialize in helping clients decrease operating costs, reduce carbon emissions, and enhance occupant well-being and productivity. From advisory services and design to construction and ongoing maintenance, we offer a comprehensive suite of Stackable Solutions across the entire building lifecycle. With over a century of experience, we have the expertise to implement high-performing projects with unmatched outcomes, serving industry leaders in mission-critical and other essential sectors such as data centers, semiconductors, life sciences, healthcare, education, and more. **Benefits Overview** **Health & Welfare** : Medical, dental, vision, prescription drug benefits, company-paid short term and long term disability, basic group life and AD&D, and mental wellness support through Spring Health. **Time Off Benefits** : Paid vacation, company-paid holidays, and paid sick leave. **Financial Benefits** : 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Salary** **Education Level** **Bachelor's Degree**

Job DescriptionAdvance your Electrical Engineering career with a well-established, multi-disciplinary firm offering impactful projects and significant growth opportunities.Electrical Engineer Benefits:- Starting salary $90K-$130K- Annual Profit Sharing Bonus- PTO- Paid Holidays- 401K with match- Health, Vision, & Dental Insurance- Company paid Life & disability Insurance- Growth OpportunitiesElectrical Engineer Requirements: - Professional Engineer (PE) licensure required- 7+ years of demonstrated expertise in electrical systems design for buildings.- Proficient in 3D modeling, visualization, and industry-standard software including Revit, SKM, and AutoCAD.- Ability to mentor junior engineers

Works with a group of Electrical Engineers to complete detailed designs of Aerospace parts. Assists in prototype circuit evaluation and system conception. Individual designs and develops analog/digital circuits for use in Aerospace system power supplies, interface circuits, analog and sensing circuits, testers, and other products as necessary. Prepares schematics, parts lists, specifications, and environmental test reports as related to their designs which may include reliability predictions, failure modes and effects analysis. May perform other duties as may be assigned or apparent. -The Electrical Engineer will generate software including the design of the System architecture. These designs will be to Aerospace and FAA requirements. The software integration will be for embedded microprocessor devices. -The Electrical Engineer will participate in the integration of software code with associated test hardware. -The Electrical Engineer will assist in the design and development of Embedded systems circuitry and printed circuit assemblies. These designs will be to Aerospace and FAA requirements. -The Electrical Engineer will participate in generating required process documentation including requirements specifications, design details, test procedures and reports. -The Electrical Engineer will prepare and review the drawings and layouts for production parts, components, and test equipment. -The Electrical Engineer will create the associated SW compliance documentation. -The Electrical Engineer will mentor younger engineers as well as review and comment on their designs. -The Electrical Engineer will support management with project estimation and customer interface. Education: Degree Requirement: Bachelor's degree in Engineering with 4-7+ years experience, or a MA/MS degree in Engineering with 2-5+ years experience, and/or a PhD degree in Engineering with 0-2+ years experience Experience/Qualifications: -Proficiency in the use of C software programming language. -Fundamental circuit design skills and knowledge of analog and digital circuits. -Some experience in analysis and schematic layout software packages. -Familiarity with some type of electrical analysis software. -There will be some computer work and drawing interpretation, as well as a familiarity with schematics or Engineering drawings. -Ability to apply advanced mathematical concepts. -Fundamental typing skills as well as familiarity with Microsoft Office Suite. Minimum Qualifications: -Required Experience: 4+ Years -Required Education: Bachelor's degree in Engineering -Required Discipline: Electrical Circuits Does this describe you? have the ability to design software and design electronic circuitry (25 down to 5 volt circuit) some analog capability only allowed to program in C language (make sure candidates are ok with this) The Ideal Candidate -need to have the ability to design software and design electronic circuitry (25 down to 5 volt circuit) -some analog capability -only allowed to program in C language -some programming, some circuitry - depending on bias, they would concentrate in one specific area The right candidate does not need aerospace experience, but it is certainly preferred. This individual should have strong communication skills Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc

Job Description: Full-Time Mid-Senior Electrical Engineer We are seeking a Mid-Senior Electrical Engineer to join a dynamic team in the power generation industry. The ideal candidate will possess a strong understanding of electrical engineering principles and bring hands-on experience in the design, development, and implementation of electrical systems. This is an exciting opportunity for an engineer looking to make an impact on large-scale projects. Responsibilities: Design electrical systems for both new and existing facilities Develop detailed electrical schematics, drawings, and documentation Provide technical guidance and support to project teams, including other engineers and project managers Oversee the installation, testing, and commissioning of electrical systems to ensure performance meets standards Ensure electrical systems comply with all relevant codes, regulations, and best practices Collaborate with multidisciplinary teams to solve complex engineering challenges Monitor project progress and make adjustments to design or implementation as necessary Qualifications: Bachelor's degree in Electrical Engineering or a related field Mid-Level: At least 5 years of experience in electrical system design and implementation (Engineer-in-Training (EiT) certification preferred) Senior-Level: At least 8 years of experience with proven expertise in electrical engineering and design (Professional Engineer (PE) certification preferred) Proficiency in electrical design software (e.g., AutoCAD, ETAP, or similar) In-depth knowledge of electrical engineering principles, codes, and standards Strong communication, teamwork, and problem-solving skills Ability to handle multiple projects in a fast-paced environment Additional Information: This is a full-time, permanent position offering competitive compensation and benefits. We are looking for individuals who can bring innovative ideas and a strong work ethic to the team. How to Apply: Please submit your resume by clicking on the "Apply" button.

At EAPC, we have an exciting opportunity for an Electrical Designer\/Engineer in our Building Services division! The ideal candidate will have a passion for design, a keen eye for detail, and the ability to work collaboratively with our architects, engineers, and clients. This role offers an exciting opportunity to work on a diverse range of projects, including healthcare, education, and public safety. At EAPC, our team of architects, engineers, interior designers, construction managers, and other professionals work together to create stunning structures and designs for optimum performance. Responsibilities include: * Manage one or more small to medium-sized projects and\/or a portion of a large project * Be involved in the development of new business opportunities and support of existing clients * Assist with the design of low to mid-rise commercial, medical, educational, and industrial facilities, complete site observations and inspections, and technical report creation * Plan, design, and provide specifications of low and medium-voltage power systems and lighting projects. * Develop technical solutions to deliver the design through documentation and detailing while preserving the design intent * Apply computerized analysis and design tools * Participate in all project design phases along with construction administration * Complete necessary project-related calculations and authoring of specifications * Perform project management duties, including assisting individual project managers with the development and management of project budgets, scopes, fees, and production coordination with progression toward independently performing these duties * Collaborate with multiple professional disciplines and be required to work within project deadlines * Demonstrate an ongoing and consistent ability to work within the EAPC team culture * Foster a commitment to external and internal client service Qualifications: * Bachelor's degree in Electrical Engineering required * 5+ years of experience required * Registration as a Professional Engineer or an EIT with the ability to obtain within a reasonable timeframe is preferred * Experience in a firm or consulting environment preferred * Experience working on healthcare projects preferred * Project management and business development understanding * Experience in 3D modeling, visualization, and modeling software; REVIT, SKM and AutoCAD strongly preferred * Working knowledge of engineering systems * Effective verbal and written communication skills and strong organizational skills * Problem-solving skills, attention to detail, and motivation to learn * Collaborative and professional work ethic * Ability to prioritize and concurrently service multiple projects * Willingness to travel as required to meet project and corporate demands * Ability to understand and communicate with professionals of other disciplines * Valid driver's license * Eligible to work in the U.S. without visa sponsorship Responsibilities and title will be based on the qualifications and experience level of the candidate. The position will report directly to the Electrical Engineering Lead and will work as an integrated member of a multi-discipline, in-house team of engineers, architects, and drafting technicians. Compensation is based on the applicant's skills, education, and other qualifications. Benefits include paid time off, holidays, 401k with matching contributions, health insurance with dental and vision coverage, company paid life insurance and disability coverage, discretionary annual profit-sharing bonuses and a career that offers challenging and interesting projects with a quality lifestyle in an engaged and inviting community. Applications will be reviewed immediately. EAPC is an equal opportunity employer disability\/veteran. If you need any assistance or accommodation completing this application, please contact human resources at ************ or email *********************. Following a conditional offer of employment, a motor vehicle background check and background check will be conducted.","

Job Description At EAPC, we have an exciting opportunity for an Electrical Designer/Engineer in our Building Services division! The ideal candidate will have a passion for design, a keen eye for detail, and the ability to work collaboratively with our architects, engineers, and clients. This role offers an exciting opportunity to work on a diverse range of projects, including healthcare, education, and public safety. At EAPC, our team of architects, engineers, interior designers, construction managers, and other professionals work together to create stunning structures and designs for optimum performance. Responsibilities include: Manage one or more small to medium-sized projects and/or a portion of a large project Be involved in the development of new business opportunities and support of existing clients Assist with the design of low to mid-rise commercial, medical, educational, and industrial facilities, complete site observations and inspections, and technical report creation Plan, design, and provide specifications of low and medium-voltage power systems and lighting projects. Develop technical solutions to deliver the design through documentation and detailing while preserving the design intent Apply computerized analysis and design tools Participate in all project design phases along with construction administration Complete necessary project-related calculations and authoring of specifications Perform project management duties, including assisting individual project managers with the development and management of project budgets, scopes, fees, and production coordination with progression toward independently performing these duties Collaborate with multiple professional disciplines and be required to work within project deadlines Demonstrate an ongoing and consistent ability to work within the EAPC team culture Foster a commitment to external and internal client service Qualifications: Bachelor's degree in Electrical Engineering required 5+ years of experience required Registration as a Professional Engineer or an EIT with the ability to obtain within a reasonable timeframe is preferred Experience in a firm or consulting environment preferred Experience working on healthcare projects preferred Project management and business development understanding Experience in 3D modeling, visualization, and modeling software; REVIT, SKM and AutoCAD strongly preferred Working knowledge of engineering systems Effective verbal and written communication skills and strong organizational skills Problem-solving skills, attention to detail, and motivation to learn Collaborative and professional work ethic Ability to prioritize and concurrently service multiple projects Willingness to travel as required to meet project and corporate demands Ability to understand and communicate with professionals of other disciplines Valid driver's license Eligible to work in the U.S. without visa sponsorship Responsibilities and title will be based on the qualifications and experience level of the candidate. The position will report directly to the Electrical Engineering Lead and will work as an integrated member of a multi-discipline, in-house team of engineers, architects, and drafting technicians. Compensation is based on the applicant's skills, education, and other qualifications. Benefits include paid time off, holidays, 401k with matching contributions, health insurance with dental and vision coverage, company paid life insurance and disability coverage, discretionary annual profit-sharing bonuses and a career that offers challenging and interesting projects with a quality lifestyle in an engaged and inviting community. Applications will be reviewed immediately. EAPC is an equal opportunity employer disability/veteran. If you need any assistance or accommodation completing this application, please contact human resources at ************ or email *********************. Following a conditional offer of employment, a motor vehicle background check and background check will be conducted. Job Posted by ApplicantPro

Arizona - Remote; Arkansas - Remote; Baton Rouge, LA; Colorado - Remote; Colorado Springs, CO; Dallas, TX; Denver, CO; Des Moines, IA; Fayetteville, AR; Florida - Remote; Fort Worth, TX; Georgia - Remote; Idaho - Remote; Indiana - Remote; Iowa - Remote; Joplin, MO; Kansas - Remote; Kansas City, MO; Kentucky - Remote; Lincoln, NE; Little Rock, AR; Louisiana - Remote; Loveland, CO; Michigan - Remote; Mississippi - Remote; Missouri - Remote; Montana - Remote; Nebraska - Remote; Nevada - Remote; New Hampshire - Remote; New Mexico - Remote; North Carolina - Remote; North Dakota - Remote; North Kansas City, MO; Ohio - Remote; Oklahoma - Remote; Oklahoma City, OK; Omaha, NE; Overland Park, KS; Phoenix, AZ; South Dakota - Remote; Tennessee - Remote; Texas - Remote; Tulsa, OK; Utah - Remote; Virginia - Remote; West Virginia - Remote; Wisconsin - Remote; Wyoming - Remote **Company Description** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** We are seeking an Electrical Engineer Expert to join our Data Center team and serve as the subject matter expert on hyperscale, mission-critical campus and facility electrical systems. This role is ideal for someone who thrives in a fast-paced, ever-evolving environment and is passionate about supporting project teams with deep technical expertise. You will be the go-to resource for electrical design strategy, QA/QC oversight, and technical mentorship across high-impact data center projects. Your work will directly influence the reliability, scalability, and innovation of our electrical systems supporting hyperscale clients. **Key Responsibilities** + Serve as the technical lead for electrical systems in hyperscale and/or colocation data center projects, including power distribution, switchgear, UPS systems, and emergency power. + Provide expert-level guidance on design standards, code compliance (NEC, NFPA, IEEE), and commissioning protocols. + Collaborate with project managers, engineers, and external partners to ensure technical excellence and alignment with client goals. + Mentor and support engineering teams, offering technical reviews, troubleshooting, and strategic input. + Lead QA/QC processes and ensure all deliverables meet the highest standards of quality and reliability. + Stay current with emerging technologies and trends in mission-critical infrastructure and integrate them into project strategies. **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Strong communication skills. + Ability to contribute and work well with a team. + Excellent interpersonal and problem-solving skills. + Bachelor's degree in Electrical Engineering and PE License + 12+ years of experience in electrical engineering with a focus on hyperscale data centers or mission-critical facilities. + Proven ability to lead technical design efforts and support multidisciplinary teams. + Strong understanding of medium and low voltage systems, redundancy strategies, and commissioning practices. + Excellent communication and collaboration skills. + Passion for mentoring and developing engineering talent. \#LI-DD1 Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. Colorado Pay Range $150,000-$236,000USD **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

RFA Engineering (*************** develops embedded software and electronics for our world-class clients in the areas of precision agriculture and vehicle electrification. We are seeking an experienced candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer's engineering and manufacturing facility. This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. Electric Machine Test & Validation Engineer The Electric Machine Test & Validation Engineer is responsible for planning, executing, and reporting verification and validation activities for electric machines used in off-highway and industrial applications. This role works collaboratively with internal and external stakeholders to ensure electric machine designs meet safety, performance, quality, reliability, regulatory, and cost requirements through structured laboratory testing, field validation, and teardown analysis. Job Description Develop, execute, and manage testing, verification, and validation plans and activities for electric machines using internal engineering tools and processes Create and track test activities, work requests, schedules, and program summaries related to verification and validation efforts Report test status, risks, results, and completion metrics to engineering teams and leadership Collaborate cross-functionally with design, test, manufacturing, suppliers, and external partners to define and deliver test and validation strategies Perform laboratory testing, field testing, and electric machine teardowns to verify designs meet application requirements Ensure electric machine designs meet safety, performance, quality, reliability, and cost targets Interpret and apply relevant standards, specifications, and regulatory requirements related to electric machines and testing activities Deliver small to medium-scale projects while operating within established program management frameworks Create, maintain, and back up complex technical documentation, test plans, procedures, and reports to a high standard Continuously develop technical capabilities through training, coaching, and industry research Maintain awareness of emerging technologies, regulations, and industry best practices related to electric machines and validation testing Requirements Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related discipline (or equivalent experience) Minimum 2 years of experience developing and executing test plans, verification activities, work requests, schedules, and engineering summaries Minimum 2 years of experience working with rotating components or electric machine design, testing, or implementation Knowledge of data acquisition systems and instrumentation such as accelerometers, thermistors, current transducers, and vector network analyzers Strong written and verbal communication skills Experience with test scheduling, prioritization, and execution Ability to travel up to 20%, primarily local Preferred Skills Knowledge of related electric drive components including inverters, connectors, and energy storage systems Understanding of AI and data-driven methods applied to testing, verification, and validation activities Strong analytical knowledge of electric machine design, including electromagnetics, continuous and peak load evaluation, bearings, insulation systems, cooling methods, and manufacturability Experience with accelerated and durability test methods Ability to work independently and provide technical guidance on testing, evaluation, and improvement of engineering outcomes Ability to track, measure, and communicate progress toward intermediate milestones to ensure projects remain on schedule Experience managing projects with minimal supervision while meeting cost, schedule, and quality objectives Proven experience collaborating across engineering and functional teams to achieve shared goals Experience using Windchill and Creo About RFA Engineering RFA Engineering has provided product development and engineering services to industry leading customers since 1943. Our primary focus is the development of off highway equipment including agricultural, construction, mining, recreational, industrial, and special machines. Our work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. Our engineering staff is located at our Engineering Center in Minneapolis, branch office in Dubuque, IA, and at numerous customer sites throughout the U.S. Competitive Benefits Health and Dental Insurance TelaDoc Healthiest You Supplemental Vision Insurance Company Paid Life Insurance Company Paid Long-Term Disability Short-term Disability Retirement Savings Account (Traditional 401k & Roth 401k) Flexible Spending Plan Dependent Care HSA for Medical Expenses Bonus Plan (Exempt Employees Only) Paid Time Off (PTO) Paid Holidays Bereavement Leave Employee Assistance Programs (EAP) Education Assistance Equal Opportunity and Veteran Friendly

RFA Engineering (*************** develops embedded software and electronics for our world-class clients in the areas of precision agriculture and vehicle electrification. We are seeking an experienced candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer's engineering and manufacturing facility. This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. Electric Machine Test & Validation Engineer The Electric Machine Test & Validation Engineer is responsible for planning, executing, and reporting verification and validation activities for electric machines used in off-highway and industrial applications. This role works collaboratively with internal and external stakeholders to ensure electric machine designs meet safety, performance, quality, reliability, regulatory, and cost requirements through structured laboratory testing, field validation, and teardown analysis. Job Description Develop, execute, and manage testing, verification, and validation plans and activities for electric machines using internal engineering tools and processes Create and track test activities, work requests, schedules, and program summaries related to verification and validation efforts Report test status, risks, results, and completion metrics to engineering teams and leadership Collaborate cross-functionally with design, test, manufacturing, suppliers, and external partners to define and deliver test and validation strategies Perform laboratory testing, field testing, and electric machine teardowns to verify designs meet application requirements Ensure electric machine designs meet safety, performance, quality, reliability, and cost targets Interpret and apply relevant standards, specifications, and regulatory requirements related to electric machines and testing activities Deliver small to medium-scale projects while operating within established program management frameworks Create, maintain, and back up complex technical documentation, test plans, procedures, and reports to a high standard Continuously develop technical capabilities through training, coaching, and industry research Maintain awareness of emerging technologies, regulations, and industry best practices related to electric machines and validation testing Requirements Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related discipline (or equivalent experience) Minimum 2 years of experience developing and executing test plans, verification activities, work requests, schedules, and engineering summaries Minimum 2 years of experience working with rotating components or electric machine design, testing, or implementation Knowledge of data acquisition systems and instrumentation such as accelerometers, thermistors, current transducers, and vector network analyzers Strong written and verbal communication skills Experience with test scheduling, prioritization, and execution Ability to travel up to 20%, primarily local Preferred Skills Knowledge of related electric drive components including inverters, connectors, and energy storage systems Understanding of AI and data-driven methods applied to testing, verification, and validation activities Strong analytical knowledge of electric machine design, including electromagnetics, continuous and peak load evaluation, bearings, insulation systems, cooling methods, and manufacturability Experience with accelerated and durability test methods Ability to work independently and provide technical guidance on testing, evaluation, and improvement of engineering outcomes Ability to track, measure, and communicate progress toward intermediate milestones to ensure projects remain on schedule Experience managing projects with minimal supervision while meeting cost, schedule, and quality objectives Proven experience collaborating across engineering and functional teams to achieve shared goals Experience using Windchill and Creo About RFA Engineering RFA Engineering has provided product development and engineering services to industry leading customers since 1943. Our primary focus is the development of off highway equipment including agricultural, construction, mining, recreational, industrial, and special machines. Our work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. Our engineering staff is located at our Engineering Center in Minneapolis, branch office in Dubuque, IA, and at numerous customer sites throughout the U.S. Competitive Benefits Health and Dental Insurance TelaDoc Healthiest You Supplemental Vision Insurance Company Paid Life Insurance Company Paid Long-Term Disability Short-term Disability Retirement Savings Account (Traditional 401k & Roth 401k) Flexible Spending Plan Dependent Care HSA for Medical Expenses Bonus Plan (Exempt Employees Only) Paid Time Off (PTO) Paid Holidays Bereavement Leave Employee Assistance Programs (EAP) Education Assistance Equal Opportunity and Veteran Friendly

Electrical Engineer - Energy and Power These openings provide the opportunity to engage with our clients, evaluate their energy needs, develop concept-level plans and solutions, then take these through detailed design to provide for full execution of the solution. We offer and deliver a true "end to end" life-cycle service from exploration, development, operation, and repowering/retirement. Demonstrated abilities include a basic understanding of electrical engineering sciences. Prior experience in consulting and design will be highly regarded. Your primary responsibilities will focus upon providing feasibility studies, construction documents and construction oversight for energy projects. You'll be expected to possess strong communication and problem-solving skills. Successful candidates will have a strong grasp of engineering fundamentals and the confidence to explore innovative solutions. If you are passionate about developing reliable and sustainable energy projects, motivated by a challenge, and enjoy working with a dynamic, multi-disciplinary team to develop innovative solutions, Jacobs is the place for you. Come join our growing team to realize the future of energy! #epjobs #naepjobs #Xcel #LI-TD1 · Bachelor's or Advanced Degree in Electrical Engineering, Electrical Power Engineering or related engineering discipline · At least 4 years of design/consulting experience · Demonstrated ability for developing design calculations, construction drawings and specifications. · Strong communication and technical writing skills · Ability to work independently with minor supervision once given guidance by lead engineer Other highly regarded qualifications include Professional Registration as well as experience with: · 3D modeling software such as Revit, AutoCAD, CADWorx and NavisWorks · Power system modeling experience using SKM Power Tools, ETAP or similar modeling software · Power distribution systems and microgrids · Power generation projects exceeding 10MW capacity · HV or MV Substations · Renewable energy projects including wind, solar, hydro, geothermal and other technologies · Energy storage systems · Protection and Control, SCADA or power system automation · Campus utility master planning or decarbonization/climate response planning · Cogeneration or combined heat and power systems · Thermal utility plants and distribution systems (steam, hot water, chilled water) Professional Engineer (PE) OR the ability to obtain Professional Engineer (PE) within 1 year, preferred Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

Electrical Engineer in Training (EIT) - Fargo, ND AE2S is an award winning civil/environmental engineering firm seeking a highly motivated Electrical Engineer in Training (EIT). The successful candidate will work under the direct supervision of project management and design engineers developing skills in report preparation, electrical system studies, design tasks including calculations, preparation of plans and specifications, bidding assistance and construction administration, with an emphasis on personal/career development. Responsibilities Perform electrical engineering design tasks focused in the areas of water, wastewater, municipal, and process industrial projects. Assist in the design of power distribution systems, instrumentation and control (SCADA) systems, access control and security systems, fire alarm systems, and backup power generation systems. Assist Project Managers with the development and preparation of reports, studies, plans, specifications, and estimates. Assist Project Managers in the design, bidding and construction of electrical systems. Maintain project and company tracking information in Deltek software platform. Attend internal and external design review meetings and coordinate with other engineering disciplines. Requirements Basic Qualifications Bachelor's degree in Electrical Engineering Fundamentals in Engineering certified or ability to obtain within 6 months Strong written and oral communication skills Ability to travel as required (less than 10%) All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. Preferred Qualifications AutoCAD and/or Revit experience 2 years internship experience related to electrical engineering Physical Ability to walk up to 3-miles on uneven terrain Ability to stand or sit for prolonged periods of time Occasionally climb, stoop, bend, kneel, crouch, reach, and twist Occasionally lift, carry, push, and pull light to moderate amounts of weight May require lifting and carrying up to 20 pounds, with rare lifting of up to 50 pounds Ability to inspect equipment, structures, or materials to identify the cause of errors or other problems or defects. May be required to wear Personal Protection Equipment (PPE) including but not limited to, flame resistant clothing, hard hat, and protective footwear May require occasional evenings and weekends with overtime expectations varying with workload May be required to travel to off-site locations including occasional overnight stays out of town Elevate Your Career with AE2S - Award-Winning Culture and Unmatched Benefits Advanced Engineering and Environmental Services (AE2S) is an award-winning, specialized civil/environmental engineering consulting firm that provides professional services and a unique brand of extreme client service. Our work environment is consistently recognized both locally and nationally for our great culture and values, proven recognition programs, and social atmosphere. Great Culture and Spirit where Creativity is Fostered Significant Opportunities to Grow and Advance 100-percent Employee Owned Core Values which Speak to the Heart of AE2S and its Employees Large, Diverse, and Challenging Projects with the Latest Technology Family-Friendly with Flexibility and Work-Life Balance AE2S offers more than just competitive compensation and a best-in-class insurance package to our employees and families; our benefit plan is one of the richest plans currently in the marketplace today! 100-percent paid Family Health Insurance 100-percent paid Employee Dental, Short- & Long-Term Disability, and Vision Insurance Discretionary Bonus Plan Employee Stock Ownership Plan (ESOP) Matching 401(k) Contributions with Discretionary Profit Sharing Contributions Paid Time Off (PTO) Credits for Past Experience Paid Parental Leave Wellness Program AE2S is an Equal Opportunity / Affirmative Action Employer