Electrical engineer internship jobs in Redmond, WA - 349 jobs

Zeno Power is the leading developer of nuclear batteries - compact power systems that provide reliable, clean energy in frontier environments. By harnessing the heat from radioisotopes, Zeno's batteries power critical missions on Earth, in space, and at sea. To bring this technology to market by 2027, Zeno is seeking out purpose-driven and innovative professionals who are comfortable working in a startup environment. Team members will have a direct impact in enabling commercial and national security missions from the depths of our oceans, to the surface of the moon, and in austere environments here on Earth. Zeno is proud to be an Equal Opportunity Employer and is committed to attracting, retaining, and developing a highly qualified, diverse, and dedicated work force. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state, or local law. Senior/Principal Electrical Engineer Zeno is seeking a highly motivated Senior/Principal Electrical Engineer to support the mission-oriented efforts of developing and bringing to market Radioisotope Power Systems (RPS) technologies. The Senior/Principal Electrical Engineer will report to the Mechanical Engineering Manager. In this role you will: Work closely with a team of engineers to support the design, testing, and manufacturing of electrical components supporting each project. Interface with the mechanical, structural, thermal, and nuclear teams to implement and optimize designs based on system requirements. Lead the design, implementation, and optimization of complex control systems in both R&D and production settings. Create and manage power and data budgets across projects. Review designs for control systems, power distribution, power conversion, battery systems, and data communication. Design test racks including data acquisition systems, power supply, communications, sensors, and grounding schemes. Develop and review documentation relating to electrical subsystems including Specifications, Interface Control Documents (ICDs), Bill of Materials (BOMs), Test Plans & Procedures, and Test Reports. Support Project Supplier work through SME review of supplier designs, fabrication activities, and testing. Perform other relevant duties as assigned. Key Qualifications and Skills Bachelor's degree in Electrical Engineering or equivalent from accredited university plus 7+ years of relevant experience or Master's degree with 5+ years of relevant experience. Proficient with controls, electrical diagram, and harness design programs (LTspice, Altium, Labview, Solidworks, or similar). Proficient in the use of standard electronic lab test equipment (oscilloscopes, DMMs, power meters, data acquisition cards, etc.). Demonstrated ability to work with hardware, including tasks such as soldering, assembling wiring harnesses, and constructing test racks. Familiarity with communication protocols common in aerospace applications and extreme environments. Familiarity with environmental tests as they affect electrical components (EMI/EMC, vibration, thermal vacuum, etc.). Experience performing activities under a quality standard (such as NQA-1, AS 9100, or similar). Experience in the aerospace and/or nuclear industry is desired. Candidate must be a self-starter and possess required skills to coordinate and contribute to design effort with minimal direction. Can meet deadlines and perform under pressure in an uncertain environment. Capable of working independently or as part of a team, with clear communication and collaboration skills. Must have excellent written and oral communication skills. Job Functions Position requires in-office presence in Seattle (South Lake Union) on Tuesdays, Wednesdays, and Thursdays, remote work is optional on Mondays and Fridays Travel: Travel is required, Motor Abilities: Sitting and/or standing for extended periods, bending/stooping, grasping/gripping, fine motor control (hands) Physical exertion and/or requirements: Minimal, with ability to safely lift up to 15 pounds Repetitive work: Prolonged Special Senses: Visual and audio focused work Work Conditions: Stairs, typing/keyboard, standard and/or sitting working environment of >8 hrs./day Compensation and Benefits The anticipated salary band for this position is $145,000 - $185,000. The final job level and compensation will be determined by various factors such as a candidate's relevant work experience, years of relevant experience, skills, qualifications, certifications, and other business considerations. In addition to competitive compensation, we also offer a generous benefits package, which includes: Stock options Flexible paid time off 401k plan with employer match 16 weeks of paid family leave Employer HSA contributions Transit benefits to put toward commuting expenses Medical, dental, and vision insurance Relocation assistance Dedicated dog friendly spaces in office Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to talk or hear. Specific vision abilities required by this position include close vision, distance vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. Export Control Applicants for employment at Zeno Power must be a U.S. person. The term “U.S. Person” means (i) a U.S citizen or U.S. national; or (ii) any natural person who is a U.S. Lawful Permanent Resident (i.e., holds a Green Card), as defined by 8 U.S.C. 1101(a)(20) or as a “protected individual” defined by 8 U.S.C. 1324b(a)(3) (i.e., admitted as a refugee or is granted asylum). #J-18808-Ljbffr

KGS Group is looking for an Electrical Engineer to join our Bellevue, WA or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team! The Role As an Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering work products often with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You'll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out inspections for rehabilitation projects for dams and hydroelectric facilities. Your particular focus will be design delivery and mentorship, but you will also be involved in the proposal process. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers. Key Responsibilities Provide input to those managing and executing multiple projects (small to large) from the proposal stage through to completion Establish connections with other departments to support and enhance service delivery Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met Mentor junior staff Design modifications to, or entirely new electrical, instrumentation, and controls systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner. Manage and execute multiple projects from the proposal stage through to completion; Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors Prepare and review reports Perform calculations Conduct inspections and support project work on site as required Edit and prepare design specifications Conduct QA/QC reviews and facilitate the KGS's QA/QC process. Contribute to the development of the electrical engineering practice at KGS by assisting the electrical design leadership by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned About You To fill the role, we're looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: Minimum of a Bachelor of Science (BS) degree in electrical engineering from a recognized university; A post-graduate degree is an asset Minimum of 7-15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules) Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states via comity within three months of starting. Previous consulting experience is preferred but not required. Excellent verbal and written communication skills Candidate must be self-motivated, and able to work independently with minimal supervision Must be able to effectively assume a lead role as project engineer and communicate project and technical information with clients Demonstrated experience in site investigations, condition assessments, design and construction support are preferred Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered Experience with the following would be considered an asset: Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup) Lighting (including emergency and exit lighting systems) Fiber and copper structured cable systems, and associated networking equipment Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience) Protection systems experience, including specifying, setting and verifying (include reference to voltages) Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training) North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning Physical or cyber security planning or design Unit outage planning Other renewable energy experience Travel to project sites is usually limited but is required depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks Have the drive, attitude and commitment to being an active participant in our employee-owned culture is a must The salary range for this position is $120,000 to $155,000 annually. Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.

About Helion We are a fusion power company based in Everett, WA, with the mission to build the world's first fusion power plant, enabling a future with unlimited clean electricity. Our vision is a world with clean, reliable, and affordable energy for everyone. Since Helion's founding in 2013, we have raised over $1 billion from long-time investors such as Sam Altman, Mithril, and Capricorn Investment Group as well as new investors SoftBank and Lightspeed to propel us forward. Our last prototype, Trenta, completed 10,000 high-power pulses and reached plasma temperatures of 100 million degrees Celsius (9 keV). We are now operating Polaris, our next prototype on the path to the world's first fusion power plant. This is a pivotal time to join Helion. You will tackle real-world challenges with a team that prizes urgency, rigor, ownership, and a commitment to delivering hard truths - values essential to achieving what no one has before. Together, we will change the future of energy, because the world can't wait. What You Will Be Doing: As an Electrical Systems Engineer, you will be at the center of bringing our next-generation fusion machine hardware to life. You'll own the integration of electrical subsystems into a cohesive, reliable system, ensuring that power, control, and communication networks work seamlessly together. You'll design and deliver the electrical harnesses that connect our machines, manage the interfaces between disciplines through clear requirements and ICDs, and work directly with suppliers to bring critical hardware into production. This role blends detailed hands-on engineering with system-level ownership, ideal for engineers who thrive at both detail and system scales. You will report to the Electrical Engineering Lead, and this is an onsite role located at our Everett, WA office. You Will: Own the integration of electrical components and subsystems into full systems Define, maintain, and enforce system-level requirements and interface control documents (ICDs) across electrical, mechanical, and/or software teams Lead the design, documentation, and validation of electrical harnesses, ensuring manufacturability, reliability, and compliance with standards Collaborate with and manage harness suppliers-delivering build packages, reviewing prototypes, and qualifying production deliveries Work hands-on in the lab during system bring-up, debugging integration issues, and validating end-to-end functionality Partner with cross-functional teams to ensure subsystem designs align with top-level system goals and requirements Drive continuous improvement in integration processes, test strategies, and documentation practices Required Skills: Bachelor's or master's degree in electrical engineering or related field 3+ years of experience in electrical system integration, test, or design engineering Strong background in electrical schematics, harness design, and interconnect systems Experience writing, maintaining, and enforcing system-level requirements and ICDs Proficiency with CAD/eCAD tools for harness and schematic design (Altium, NX, etc ). Hands-on experience with system bring-up, troubleshooting, and root-cause analysis using lab instrumentation (oscilloscopes, DMMs, spectrum analyzers, etc.) Proven ability to collaborate across disciplines and communicate clearly in technical and non-technical settings Strong documentation discipline and ability to manage supplier deliverables #LI-Onsite #LI-KL1 Total Compensation and Benefits Helion's compensation package includes a competitively benchmarked base salary, meaningful equity grants, and comprehensive benefits. Final compensation is determined through a holistic evaluation of your experience, qualifications, and our commitment to internal equity - ensuring fairness and transparency across our teams. We are committed to fostering a fair and equitable environment in every aspect of our operations, including compensation. This is an exempt salaried role. Annual Base Pay $165,000 - $200,000 USD Benefits Our total compensation package includes benefits, including but not limited to: • Medical, Dental, and Vision plans for employees and their families • 31 Days of PTO (21 vacation days and 10 sick days) • 10 Paid holidays, plus company-wide winter break • Up to 5% employer 401(k) match • Short term disability, long term disability, and life insurance • Paid parental leave and support (up to 16 weeks) • Annual wellness stipend Helion is an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need assistance or an accommodation during the interview process, please let us know.

At Meta, we're building the future of human connection and the technology that enables it. This means continuously inventing and developing technologies for the next generation of experiences. To continue our efforts in the path to AGI, and as we move closer to a future with intelligent robots and advanced AI models, we're hiring talent across a broad range of disciplines from robotics hardware to system software, machine perception, and artificial intelligence. These crucial projects and initiatives taken on by this team have never been done before, so you have a rare opportunity to help us create new ways people connect around the world. Meta Robotics Studio is seeking an Electrical Engineer. This role is pivotal in tackling the most novel electrical design problems we face, including designing and developing complex robotics that balance ergonomics, performance, reliability, and usability while maintaining the highest safety and quality standards. This role is part of a team responsible for initial concept development, analytical modeling, prototype design, construction, and testing. **Required Skills:** Electrical Engineer: Robotics Hardware Engineering Responsibilities: 1. Architect and design electrical engineering solutions for the next generation of robotics that include fabrication and assembly of Printed Circuit Boards, Flexible Printed Circuits, and Rigid Flexible Printed Circuits 2. Develop schematics, guide board layout, assemble, test, debug, and integrate multi-component electrical systems using industry-standard simulation and design packages such as SPICE, MATLAB, Altium or Cadence 3. Establish and conduct collaborations with multidisciplinary partners, both internal and external 4. Embrace constant learning, diving into new areas with unfamiliar technologies, and supporting the ambiguity of robotics problem solving **Minimum Qualifications:** Minimum Qualifications: 5. 5+ years of experience in Electrical Engineering, with a proven track record of contributing to the successful inception, ideation, development, and launch of consumer products 6. BS degree or equivalent experience in Electrical Engineering, Computer Engineering or a related field 7. Experience in one or more of the following systems in the context of Robotic systems: Lithium Battery Systems, High Power (>100W) DC/DC Power Conversion and Distribution, DC Motor Controllers and Drivers, Embedded systems (MCU/GPU), Electrical System Integration, positional sensing (encoders, etc), cable harness design, functional safety systems, and control theory 8. Experience with electrical system integration including schematic and layout using industry-standard simulation and design packages such as SPICE, MATLAB, Altium or Cadence 9. Experience with electrical design verification using standard test and measurement equipment (Oscilloscope, LCR, DMM, Electronic Load, etc) 10. Experience working collaboratively with cross functional Engineering, Safety, Manufacturing, and external partners 11. Experience hands-on in lab assembling and testing systems, including soldering, crimping, and basic mechanical assembly 12. Experience innovating and solving complex design problems **Preferred Qualifications:** Preferred Qualifications: 13. MS or equivalent experience in Electrical Engineering, Computer Engineering or a related field 14. 8+ years of experience in research or advanced development incubating new tech and guiding them through to product transfer 15. Experience in full Robotics and consumer electronic product design 16. Experience programming in other languages like Python/Java/C#/C++/C, creating initial system bring-up, debugging, and test code 17. Experience with signal and power integrity 18. Experience with vendor engagement and relationship management, including co-design and customization of existing commercial technologies 19. Experience defining and coordinating test procedures in a lab and factory environment to facilitate system bring-up and evaluation 20. Experience with electrical and operational safety controls and procedures 21. Design for Compliance certification and EMI/EMC theory **Public Compensation:** $173,000/year to $245,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

At Stoke, we believe that a thriving space economy leads to a vibrant, sustainable, and equitable future here on Earth. That is why we are building our fully and rapidly reusable vehicle, Nova. It is designed to fly daily and solve the core challenges of space transportation - it reduces cost, increases availability, and enhances reliability. By radically lowering the cost and increasing the cadence of launch, we're able to create a truly scalable space industry. Our team is mission-driven, collaborative, and empowered with ownership of their work. If you want to work with some of the most dedicated and talented people on Earth, come join us. Description The Avionics system is the backbone of highly reusable, operable, and reliable space systems. As an Electrical Development Test Engineer at an early-stage start-up you will be responsible for developing test solutions used to qualify our flight avionics hardware. You will work closely with the development and production team to design and implement the avionics test architecture, and continuously iterate and improve your designs. You will seek out state-of-the-art solutions to difficult problems and you will assist in the definition of company standards for avionics development. You must be ready to stay focused, move fast, self-direct, and learn on the fly. Responsibilities Design, develop, and maintain custom test solutions for flight avionics electronics, power distribution system, batteries, RF components, and electro-mechanical actuators Develop and implement a modular, scalable test architecture through use of commercial-off-the-shelf hardware and custom PCBAs for measuring signals, applying flight-like loads, and powering units under test Write test automation software to interact with flight hardware/software, test equipment, instrumentation, and production systems Execute development and qualification test campaigns to exercise designs to their limits and ensure reliable flight hardware including thermal cycling, random vibration, shock, TVAC, EMI/EMC, etc Troubleshoot hardware/software issues and propose/implement necessary changes to resolve Maintain configuration control of test hardware and software Drive continuous improvement efforts to increase throughput and reduce cost to meet launch target Qualifications B.S. degree in electrical engineering or equivalent on the job experience Experience designing, building, or testing circuit boards or other electronics (research and extracurricular academic projects qualify) Preferred Qualifications Environmental test experience per SMC-S-016, RCC 319, and or MIL-STD-810 Experience modular, configuration, automated test hardware and software Experience with Python, Rust, LabVIEW, LabJack, UEI, National Instruments hardware, etc Experience with schematic capture and board layout, preferably in Altium Familiarity with lab equipment for development testing of circuits and components Capable of board level rework in support of development testing Basic first principles understanding of EMI/EMC and common best practices for design Capable of writing software for test automation, data review, and design analysis Excellent verbal and written communication skills Benefits Equity - We know that our employees are the reason we succeed. To give everyone a stake in our future, we are pleased to offer equity in the form of stock options to all regular, full-time employees Comprehensive benefits program including subsidized medical, dental, and vision insurance Company-paid life and disability insurance 401(k) plan with employer match 4 weeks' Paid Time Off Holidays - 10 days (including an end-of-year closure) Paid Family/Parental Leave On-site gym or monthly wellness stipend (depending on location) Dog friendly offices! Compensation Target Levels: Level 1 Range: $95,550 - $120,645 Level 2 Range: $109,725 - $148,470 Level 3 Range: $129,150 - $193,620 Our job posts are intentionally written to attract a wide variety of experience levels, and we make decisions about the right fit on a per-candidate basis. Your actual level and base salary will be decided based on your specific experience and skill level. ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Equal Opportunity The Company is an Equal Opportunity Employer, including with respect to disability and veteran status. It is committed to compliance with all equal opportunity laws, including the Immigration and Nationality Act (INA) and Title VII. It does not discriminate on the basis of nationality, race, citizenship, immigration status, or any other protected class when it comes to employment practices, including hiring. Employment at the Company is contingent upon satisfactory completion of reference and background checks, and on your ability to prove your identity and authorization to work in the U.S. for the Company. Employees must comply with the United States Citizenship and Immigration Services employment verification requirements, and, therefore, they must complete an Employment Eligibility Verification Form I-9 at the start of employment and re-verify authorization to work periodically. Separate from this I-9 process, this position entails access to certain technology and technical data that is restricted under U.S. export control laws and regulations. Employment or continued employment may be conditioned on your legal authorization to work with or have access to export control materials as necessary to perform your job. E-Verify Stoke Space uses E-Verify to confirm the identity and employment eligibility of all new hires.

The Machine Intelligence, Neural Design (MIND) team at Apple is looking for a Hardware Engineer to join their efforts in achieving top -notch performance and energy efficiency for neural network applications. This role focuses on HW/SW co -design and the development of low -power hardware accelerators for AI applications. Responsibilities include architecting energy -efficient hardware designs, implementing changes in an in -house simulator, and introducing new features in an in -house compiler. The ideal candidate should have at least 2 years of experience in low -power hardware design, proficiency in Python, a working knowledge of C++, and a strong understanding of computer systems and the interactions between hardware and software. They will collaborate closely with ML experts, benchmark and diagnose performance bottlenecks, and work with partners across various parts of the technology stack. The position typically requires a Bachelor's, Master's, or PhD degree in Electrical Engineering, Computer Science, or a related field. The base pay for this role ranges from $125,800 to $229,400, with additional benefits, including stock programs, comprehensive medical and dental coverage, retirement benefits, and educational reimbursement.

REQUIREMENTS - Patent preparation and prosecution experience, either in-house or as outside counsel, specifically in the electrical arts (e.g., circuit design, medical devices, and consumer devices) - A BS degree in electrical engineering is preferred, although candidates with other degrees will be considered - Legal, industry, and/or academic experience in electrical engineering, particularly with machine learning, cloud computing/networking, wireless communications, cryptography, information security, robotics or distributed ledger is desirable - Active bar admission in state where practicing - Registered to practice before the USPTO - Strong time management and organizational skills, including demonstrated ability to take ownership for, and efficiently manage, a large docket including meeting internal and external deadlines - Familiarity with operations of large organizations with established patent programs, including international organizations - Strong work ethic and commitment to being responsive to client needs - Excellent writing, communication and interpersonal skills - Ability to collaborate and work effectively with a variety of internal and external stakeholders - Demonstrated ability working independently SUMMARY Vanguard Intellectual Partners (Vanguard-IP) specializes in the placement of IP/Patent professionals nationwide. Our sole focus on intellectual property enables us to more deeply understand our clients' technical needs, and our candidates' individual talents and career interests. Our broad network of long-term client relationships gives us a competitive edge. Our recruiters all have 10+ years of IP recruiting experience, and an exceptional record of success. We have superior knowledge of the IP job market, and offer trusted career advice for our candidates. We also have the resources and high-level contacts to get your resume noticed by the people who matter. We look forward to speaking with you, and learning more about what you are seeking in your next opportunity. CONFIDENTIALITY At Vanguard-IP, we respect the confidentiality of every candidate who contacts us. Furthermore, we will always obtain expressed authorization before submitting your resume to any of our clients. **Should you have an interest in exploring opportunities in another location, we have hundreds of openings in other markets. Please apply now and our team would be happy to review your information for this or other openings in your location of interest.

IonQ is developing the world's most powerful full-stack quantum computer based on trapped-ion technology. We are pushing past the limits of classical physics and current supercomputing technology to unlock a new era of computing. Quantum computing has the potential to impact every area of human society for the better. IonQ's computers will soon redefine industries like medicine, materials science, finance, artificial intelligence, machine learning, cryptography, and more. IonQ is at the forefront of this technological revolution. We are looking for a Staff Quantum Control Hardware Engineer to join our Networking, Sensing, and Security division. As a Staff Engineer, you'll be part of a cross-functional team whose mission is to lead IonQ on its journey to build the world's best quantum computers and networked systems to solve the world's most complex problems. In this role, you will design the critical physical layer interface for next-generation quantum networking nodes and high-precision sensing devices. You will build the low-noise, high-precision mixed-signal hardware necessary to control optical sources and read single-photon detectors with the fidelity required for secure quantum communication and entanglement distribution. This is an exciting opportunity to define the hardware architecture that will enable the future of the quantum internet and ultra-secure communications. Responsibilities: Design and develop low-noise, high-precision mixed-signal circuit boards (DACs/ADCs) to drive optical modulators and laser sources for quantum networking protocols. Engineer ultra-low-noise readout interfaces for single-photon detectors used in Quantum Key Distribution (QKD) and sensing applications. Ensure hardware designs maintain the signal integrity and coherence required to preserve quantum states during transmission and transduction. Collaborate closely with FPGA Engineers to receive timing specifications and deliver signal conditioning specs for synchronization across network nodes. Lead the full hardware lifecycle from schematic capture and PCB layout to simulation, testing, and system integration within a sensing or security testbed. Troubleshoot complex hardware interactions to minimize phase noise and jitter in networking hardware. Mentor junior hardware engineers and drive technical decision-making regarding the physical layer architecture for security products. You'd be a good fit with: Bachelor's or Master's degree in Electrical Engineering, Physics, or a related engineering discipline. 8+ years of experience (or equivalent) in mixed-signal hardware design and PCB layout. Deep expertise in designing low-noise analog circuits and high-precision instrumentation. Proven experience with high-speed ADCs/DACs and signal conditioning chains. Proficiency with EDA tools for schematic capture and PCB layout (e.g., Altium, Cadence). Strong understanding of signal integrity, power integrity, and grounding in sensitive measurement systems. You'd be a great fit with: Experience designing hardware for low-latency networks, optical communications, or quantum communications. Knowledge of precision sensing applications (e.g., magnetometry, atomic clocks). Familiarity with FPGA interfacing for high-speed protocol timing. Background in controlling fiber-optic components. Location: This role will work onsite at our offices located in Bothell, WA or Vista, CA. Travel: Up to 10% Job ID: 1251 The approximate base salary range for this position is $128,119 - $167,740. The total compensation package includes base, bonus, and equity. Compensation will vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. Posted base salary figures are subject to change as new market data becomes available. Beyond base salary, total compensation includes a variable bonus and equity component and a range of benefit options found on our career site at ionq.co/jobs. Details of participation in these benefit plans will be provided when a candidate receives an offer of employment. Our US benefits include comprehensive medical, dental, and vision plans, matching 401K, unlimited PTO and paid holidays, parental/adoption leave, legal insurance, a home internet stipend, and pet insurance! IonQ's HQ is located in College Park, Maryland, just outside of Washington DC. We are actively building out our recently opened manufacturing and production facility in Bothell, WA (near Seattle). Depending on the position, you may be required to be near one of our offices in College Park, Seattle, Toronto, Canada, and Basel, Switzerland. However, IonQ will expand into additional domestic and international geographies, so don't let this stop you from applying! At IonQ, we believe in fair treatment, access, opportunity, and advancement for all while striving to identify and eliminate barriers. We empower employees to thrive by fostering a culture of autonomy, productivity, and respect. We are dedicated to creating an environment where individuals can feel welcomed, respected, supported, and valued. We are committed to equity and justice. We welcome different voices and viewpoints and do not discriminate on the basis of race, religion, ancestry, physical and/or mental disability, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, transgender status, age, sexual orientation, military or veteran status, or any other basis protected by law. We are proud to be an Equal Employment Opportunity employer. US Technical Jobs. The position you are applying for will require access to technology that is subject to U.S. export control and government contract restrictions. Employment with IonQ is contingent on either verifying “U.S. Person” (e.g., U.S. citizen, U.S. national, U.S. permanent resident, or lawfully admitted into the U.S. as a refugee or granted asylum) status for export controls and government contracts work, obtaining any necessary license, and/or confirming the availability of a license exception under U.S. export controls. Please note that in the absence of confirming you are a U.S. Person for export control and government contracts work purposes, IonQ may choose not to apply for a license or decline to use a license exception (if available) for you to access export-controlled technology that may require authorization, and similarly, you may not qualify for government contracts work that requires U.S. Persons, and IonQ may decline to proceed with your application on those bases alone. Accordingly, we will have some additional questions regarding your immigration status that will be used for export control and compliance purposes, and the answers will be reviewed by compliance personnel to ensure compliance with federal law. US Non-Technical Jobs. Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Accordingly, we will have some additional questions regarding your immigration status that will be used for export control and compliance purposes, and the answers will be reviewed by compliance personnel to ensure compliance with federal law. If you are interested in being a part of our team and mission, we encourage you to apply!

Company DescriptionSince 1975, Nytec's mission has been to set the standard in hiring highly trained and experienced engineers and technicians in both hardware and software services. We build lasting relationships with our clients by creating secure and reliable technical services, providing on-site/off-site staff, and test management solutions. As a full service engineering company, we take products from inception to delivery and elevate software to the next level. Job Description Nytec is looking for an electrical engineer with knowledge and experience in electrical design and product development. This person will have experience in high level and detailed product design, schematic entry, analog simulation, prototype assembly logistics, board bring-up, lab debugging, system integration, and troubleshooting. Requirements: • Complete understanding and wide application of technical principles, theories, and concepts in the field of electrical engineering, including but not limited to design of digital and analog circuits, moderate to complex mixed signal, component selection, guidance of PCB layout, design for EMC and DFM. • Experience with test fixture design, construction and automation. • Software and test authoring experience. • Ability to translate system performance and operational specifications into requirements, designs and specifications, and verification plans and protocols. • Ability to document and review designs using the established development process, work with mechanical, software, manufacturing and operation teams to support release to manufacturing. • Ability to manage other technical employees Technical Skills: • Electrical/Mechanical digital and analog signal analysis and troubleshooting (expert with scopes/analyzers/analog sensors) • Ability to read schematics and perform Circuit Board analysis • Knowledge of thermal chambers and cart building is preferred • Able to read design specifications and develop relevant test cases • MS products/process knowledge (Product Studio, SharePoint, Office, Excel) is preferred, but not required Additional Skills: • Be able to execute duties and lead others with little to no supervision • Highly motivated individual with strong project orientation and communication skills • Flexible and able to learn new concepts quickly; strong problem solving and troubleshooting skills • Able to work in a fast-paced environment and comfortable with ambiguity • Be concise and clear in email and documented communications • Set and track their own project and task level priorities; maintain schedules and meet deadlines • Be timely with reporting and test execution Education: • Bachelors' degree in Electrical Engineering or closely related field is required TO APPLY: Email your resume/cover letter to '[email protected]' or visit our website at ************** Additional Information All your information will be kept confidential according to EEO guidelines.

Hardware Engineer III : 64689-1 Duration: 12 month extension with good performance. This role is 100% onsite (5 days per week) Software or Hardware engineer with 5+ years of experience and have good firmware and data analytics background with HW/prototype development background as well. Familiar with common program languages and commands. 1. Operating optical HW prototypes (including PCB boards, electrical flexes, cameras, LEDs) 2. Operating on existing SW tools (running command line scripts and GUI, familiarity with on demand server) 3. Basic SW/HW troubleshooting skills (basic understanding of command line scripts, practices like restarting HW etc) Qualifications: 5+ years of experience and have good firmware and data analytics background with HW/prototype development background as well. Familiar with common program languages and commands. Job description: 1. Operating optical HW prototypes (including PCB boards, electrical flexes, cameras, LEDs) 2. Operating on existing SW tools (running command line scripts and GUI, familiarity with on demand server) 3. Basic SW/HW troubleshooting skills (basic understanding of command line scripts, practices like restarting HW etc) 4. Train moderators on how to use prototype devices 5. Ability to drive to and from Meta Campus to vendor sites for weekly checks on prototype devices Top 3 must-have HARD skills: 1. Operating hardware prototypes. ( EE background is great) 2. Software or Electrical engineer degree is a must 3. Must be a strong problem solver and great with debugging systems Good to have skills: Hardware prototyping engineering background would be perfect Hardware Test Engineer would be good. Mechanical Test engineer would likely not be a good fit

Hardware Debug Engineer< Experienced Technical Resource with a breadth of knowledge and skillset in Hardware development, qualification, and testing. Experience in post silicon validation system setup, software/firmware setup, debug tools setup, board level rework, and rack setup.< Installed, troubleshot, and maintained Server & Client computer components< Hands on experience with flashing/installing/updating BIOS, Firmware, Software and OS< Ability to read schematics and board files.< Experience using Oscilloscopes, Power supplies, Signal generators, JTAG debugger (ITP), Thermal tools, DMM, Microscopes, Camera, and Soldering station< Strong organizational, communication, documentation, and collaboration skills.< Worked on variety of ticketing/job request systems.< Knowledge of electronics theory and computer electronic systems.< Attention to detail and ability to troubleshoot complex circuits.< Installed and configured all Windows based operating systems< Bellevue - Washington - USA6 - 10 Years10C17-Dec-2025NACTIVE1426708 Mandatory Skills : PowerShell

Founded in 2022 and headquartered in Seattle, Washington, Overland AI is transforming land operations for modern defense. The company leverages over a decade of advanced research in robotics and machine learning, as well as a field-test forward ethos, to deliver combined capabilities for unit commanders. Our OverDrive autonomy stack enables ground vehicles to navigate and operate off-road in any terrain without GPS or direct operator control. Our intuitive OverWatch C2 interface provides commanders with precise coordination capabilities essential for mission success. Overland AI has secured $42M in funding, including a Series A led by 8VC, and built trusted partnerships with DARPA, the U.S. Army, Marine Corps, and Special Operations Command. Backed by eight-figure contracts across the Department of Defense, we are strengthening national security by iterating closely with end users engaged in tactical operations. Role Summary: We're seeking forward-deployed hardware and software Engineers at all levels to work at the intersection of field operations and cutting-edge robotics. This role involves designing, deploying, and sustaining autonomous software and hardware systems in austere environments while collaborating directly with end-users to refine solutions. Frequent and extended travel is expected in this role. Key Responsibilities: Deploy and Field-Test Systems: Install, configure, and evaluate OverDrive systems on uncrewed vehicles in real-world conditions. Develop and Iterate: Contribute to hardware/software integration and enhancements, leveraging user feedback to improve autonomy capabilities. Support Field Operations: Troubleshoot and repair systems during deployment, often in remote and resource-limited settings. Collaborate Across Teams: Partner with engineers and program managers to ensure seamless deployment and alignment with end-user needs. Document and Analyze: Maintain detailed records of field performance, documenting lessons learned and recommending improvements. Train and Support Users: Act as the on-site expert, training users and ensuring operational readiness. Minimum Requirements: Willingness to travel extensively (>50%) both CONUS and OCONUS to support DoD projects, often on short notice for extended durations. BS/MS in Engineering, Computer Science, or related field (or equivalent experience). Proficiency in one or more of the following: robotics, sensors, networking, embedded systems, electronics, off-road vehicle operations and maintenance. Experience supporting systems in Linux environments, including debugging hardware and software in the field. Ability to obtain and maintain a U.S. DoD security clearance. Desired Experience & Qualifications: Resilient problem-solver with a focus on delivering results under pressure. Experience with uncrewed systems and robotics software (e.g., ROS, CAN, drive-by-wire systems). Familiarity with autonomous system sensors (LIDAR, cameras). Proficiency with programming languages such as Python or C++. Knowledge of field-testing protocols and safety-critical environments. Enthusiasm for solving problems hands-on in challenging conditions, including adverse weather and remote locations. Thrive in dynamic, cross-functional teams and small startup environments. Experience deploying hardware and software in defense technology, deep tech, or start up environments. Willingness to co-locate at testing sites or military installations for extended periods, both CONUS and OCONUS. Benefits: Overland AI believes in creating a work environment that you look forward to embracing every day. The salary range for this position is $65K to $350K annually Equity compensation Best-in-class healthcare, dental and vision plans Unlimited PTO 401k with company match Parental leave Location: This position is located in Seattle, WA. Frequent, extended travel expected (>50%). Experienced and well-qualified remote candidates able to work during Pacific Time Zone business hours will be considered.

Job Description About magniX Based in Washington state, magniX is a leader in electric propulsion for aerospace & defense, working to revolutionize how the world connects by transforming the way aircraft are powered. magniX has been at the leading edge of electric propulsion innovation for quite some time, proving our technology in flight. We are now ready to take our technology and products to market. Be part of a passionate team that is ushering in the 3rd era of aviation. About the Role The Electronics Hardware Engineer II is part of the Electrical and Electronics team responsible for hardware development for electronics systems. You will participate in all aspects of solution delivery including specification, design, prototyping, testing, certification, and manufacture. Primary Responsibilities: Design, test, validate and certify high-power electronic hardware for aviation applications, both in the laboratory and on-site, to ensure compliance with DO-254 and DO-160G. Perform circuit and/or system design, integration, and test at circuit board, enclosure, and system level. Modelling and performing simulations using LTspice, Multisim, Matlab/Simulink and PCB layouts with Altium or other similar tools. Setup and testing of motor/generator/inverter prototypes and high voltage battery management and control circuit prototypes including developing test procedures, measurement, and reporting. Document life cycle data, detailed designs, design justifications, change management, and disposition of non-conformances. Draft, review, and validate requirements to ensure compliance with aerospace development lifecycle processes. Qualifications Required: BS degree or higher in electrical engineering, electronic engineering, power electronics, or related discipline 3+ years of relevant experience. Mobile motor controller/inverter product design (full lifecycle) experience, ideally in the 600kW+ power range AND/OR full lifecycle high voltage battery management system product design experience, preferably for traction applications. Demonstrated knowledge and use of power semiconductor devices in high voltage (>400V) power electronics products (Si MOSFET, Si IGBT, and SiC). Knowledge of EMI filter design and DC/DC converters. In-depth understanding of voltage insulation testing and safety. EMI/EMC compliance testing and power electronics or high voltage electronics certification. Preferred: Experience in product development for aerospace or high voltage electric vehicle batteries is an advantage. Experience with airborne systems certification requirements, guidelines, and testing (FAR Part 23 & 33, ASTM F39 & F44, RTCA DO-160G, DO-178C, DO-254), is preferred. Alternatively, experience with ISO26262 is acceptable. Demonstrated ability working in cross functional technical teams, fostering collaboration and innovation. Technical writing skills to create engineering documentation within a certification and quality framework. Location Applicants must be willing and able to commute to magniX's location in Everett, Washington. Compensation & Benefits 100% company-paid premiums for medical, dental, and vision insurance (for employees & dependents). 4 weeks paid vacation + 1-week annual end-of-year shutdown, sick time, and 11 paid holidays. 401K retirement plan with industry leading 9.5% company contribution. Company paid Life insurance, AD&D, Short-Term and Long-Term disability insurance Catered lunches and quarterly company fun-day events! Salary Range: $120k-$150k E-verify magniX utilizes E-verify for employment eligibility verification Pre-employment Screenings: Employment with magniX is contingent upon satisfactory completion of pre-employment requirements including a background screen. EHS/Environmental Requirements: This job operates in a manufacturing and testing environment. While performing the duties of this job, the employee routinely is required to use hands to keyboard, communicate, listen to, and interpret instructions and remain stationary for extended periods of the time. This would require the ability to move around the facility and occasionally move/lift items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. Required PPE (Personal Protective Equipment) Required PPE provided by magniX based on the employee's position and exposure. Below are typical PPE used on the manufacturing and testing floor. Ear Plugs - Earmuffs Safety shoes Safety Glasses - Safety Goggles Export Control Compliance This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” is required. A “U.S. Person” includes U.S. citizens, lawful permanent residents, refugees, or asylees. As this position requires access to export-controlled data, an appropriate export authorization by the U.S. Government may be required prior to such access. Employment, and the continuity of employment of non-U.S. persons, is contingent upon the company's ability to secure and maintain the necessary export control authorization. Diversity and Inclusion magniX is an equal opportunity employer. We value and embrace diversity. We do not discriminate on the basis of race, color, national origin, religion, gender, gender identity or expression, sexual orientation, marital status, age, or disability status.

Seattle City Light's Generation Electrical Engineering Section is seeking two high performing, licensed Professional Electrical Engineers, from any state, to join our team. We have a great variety of interesting and challenging projects to work on and are pleased to advertise these positions. If you're bringing your PE from another state, you will have one year to obtain your Washington State PE by exam or comity. One of our positions is located in Newhalem, Washington. As the selected engineer, you will report to Newhalem, Washington and be assigned to support the day-to-day operations of the three power plants of the Skagit Hydroelectric Project. The Skagit project is in the North Cascades National Park and you will have the option to live in the company town of Newhalem depending on available space. Our other position is located in downtown Seattle. As the selected engineer, you will report to Seattle Municipal Tower. With both positions, in addition to day-to-day support, you will be assigned capital projects to design and work collaboratively with field crews to install and test new equipment related to their design. We are interested in individuals with a positive attitude, good people skills and broad experience working on hydroelectric generation facilities. This position reports to the Generation Electrical Engineering Supervisor. Seattle City Light, a department of the City of Seattle, is one of the nation's largest municipally owned utilities in terms of the number of customers served. Over the years we have worked very hard to keep Seattle's electricity affordable, reliable, and environmentally sound. Today, City Light is a recognized national leader in energy efficiency and environmental stewardship. Here is more about what you'll be doing: The successful candidate will be assigned to work on projects based on their experience and project needs, and could be asked to work on any of the following: * Hydroelectric generators, transformers, circuit breakers, governors, and exciters. * Balance of plant (BOP) equipment such as batteries, and AC power distribution and SCADA systems * Plant Controls, Automation, and Relay Protection * Equipment associated auxiliary systems including hydraulic power units, standby generators, and compressors. * Spillway and intake gates controls. * Troubleshooting, commissioning, inspection, and installation of electrical systems. * Lead technical role working with on-site skilled trades. * Design review and stamping of electrical design packages. * Project estimating, developing, and presenting proposals. * Condition assessment, performance monitoring, data analysis and preventative maintenance in hydroelectric generating stations. * Leading multidisciplinary design teams. * Managing projects and several concurrent mandates on schedule, and within budget. * NERC reliability standards as they relate to the operation of Bulk Electric System assets. * Committed to safe work practices and experience working with safe work procedures. * Excellent communication and report writing skills. Required Qualifications: In addition to the skills and experience mentioned below, a successful applicant will have experience that reflects a commitment to creating fair and equitable outcomes and has: Education: A Bachelor of Science degree in Electrical Engineering. Experience: Total of 6 years of progressively responsible, difficult and highly complex electrical engineering experience in the Power Industry. (or other combinations of education and/or experience which provide preparation to do professional electrical engineering work on major electrical power systems). Certification/License: * Registration as a Professional Electrical Engineer in the State of Washington is required. If you are licensed in another state, you may obtain your Washington PE by exam or comity within 12 months of hire. * Current Washington State Driver's License or evidence of equivalent mobility. Desired Qualifications - You will be successful if you have the following experience, skills, and abilities: * Experience working with hydroelectric generators, and associated Exciters, Governors, Relay Protection, Plant Controls and Automation is highly desired. * Experience with and recognition of values associated with excellent customer service. * Knowledge of and direct experience with NERC reliability standards as they relate to the operation of Bulk Electric System assets. * Operations experience with remote generating facilities * Experience in legacy electrical systems and equipment * Good interpersonal, technical writing and oral communication skills. * Proficient using AutoCAD to prepare Engineering Design Packages. Please note this job advertisement is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Application Process Please submit the following with your online application: * A cover letter in which you clearly describe how your knowledge, experience, skills, and abilities prepare you for the job responsibilities and qualifications outlined in the job announcement * A current resume of your educational and professional work experience. Incomplete applications may not be considered. The full salary range for this position is $79.13 - $92.88 per hour. Who May Apply: This position is open to all candidates that meet the qualifications. Seattle City Light values diverse perspectives and life experiences. Applicants will be considered regardless of race, color, creed, national origin, ancestry, sex, marital status, disability, religious or political affiliation, age, sexual orientation, or gender identity. Seattle City Light encourages people of all backgrounds to apply, including people of color, immigrants, refugees, women, LGBTQIA+, people with disabilities, veterans, and those with diverse life experiences. Job offers are contingent on the verification of credentials and other information required by the employment process, including the completion of a background check. The background check will involve a criminal history check, which includes conviction and arrest records in compliance with the Seattle's Fair Chance Employment Ordinance, SMC 14.17 and the City of Seattle Personnel Rule 10.3. A driving history review may be conducted in compliance with SMC 4.79.020. Applicants will be provided an opportunity to explain or correct background information. The City of Seattle offers a comprehensive benefits package including vacation, holiday, and sick leave as well as medical, dental, vision, life and long-term disability insurance for employees and their dependents. More information about employee benefits is available on the City's website at: *********************************************************************************************************** Want to know more about Seattle City Light? Check out our web page: ****************************************************

This role supports passenger vehicle R&D via the testing\/validation of electrical systems and components. We are looking for engineers with experience test\/validating any of the following systems and their components: Electrical Control Units Starter Motor Generator Electrical Charge\-Discharge Controls Powertrain\/Chassis\/Engine sensors and controls Audio Systems Navigation Systems Camera Systems In\-Vehicle Entertainment Telephonic Systems Driver Displays The primary job activities are: Develop electrical, performance, and functional requirements for new passenger vehicles Investigate and understand the functional requirements (including hardware, software, and communication) for assigned systems and components Setup test equipment, collect test results\/data, verify test accuracy and completeness, analyze results, summarize findings, present reports, and coordinate with stakeholders to address issues Develop, write, and issue related engineering specifications as required Brainstorm, develop, propose, and justify new related functions and systems to meet the market requirements Ensure all necessary system\/component testing is completed...performing some basic electrical testing by oneself as needed. Responsible to ensure assigned systems and components achieve product acceptance for mass production. Develop all necessary reports, presentations or technical documents to explain and\/or make a record of the development process and activities Support factory, sales, suppliers, etc. as required for product explanations, owner's manual reviews, manufacturing issues, supply concerns, or market complaints RequirementsRequired Experience 2 to 6 years in an electrical test position within a transportation industry (automotive, heavy truck, off\-road vehicles, ag equipment, aerospace, specialty vehicle, etc) Required Education B.S. in Electrical Engineering or related discpline Required Skills Proven ability to independently test\/validate electrical systems and component within a transportation application context Test data acquisition (sensor setup, data collection) Strong technical communication (English) \- both written and oral Basic hand\-on mechanical skills as you will be helping prepare test vehicles, troubleshooting issues, and proposing solutions Self driven and able to complete tasks independently Personal time and task management Desired Skills Engine testing (dyno) CAN communication development Embedded system development Benefits Overtime pay (1x base rate) Paid Time Off Paid Holidays Health, Dental, Vision Insurance Life and Disability Insurance "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"691829330","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Work Experience","uitype":2,"value":"2 \- 6 years"},{"field Label":"Industry","uitype":2,"value":"Automotive"},{"field Label":"Salary","uitype":1,"value":"DOE"},{"field Label":"City","uitype":1,"value":"Marysville"},{"field Label":"State\/Province","uitype":1,"value":"Ohio"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"43041"}],"header Name":"Automotive Test Engineer \- Electrical","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********00258003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":true,"job Id":"**********00331052","FontSize":"15","location":"Marysville","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do"}

KGS Group is seeking a Senior Electrical Engineer to join our growing practice in Bellevue, WA or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team! The Role As a Senior Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large scale hydro projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering inputs often with multi-disciplinary project team members and senior stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our powerhouse and energy capabilities and working with key staff in growing that aspect of the business. You'll also be involved in supporting project management duties, liaising with both internal and external clients as well as assisting with guiding and mentoring graduate engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out onsite visits for rehabilitation and upgrades to dams, hydroelectric facilities and new hydroelectric developments. You will participate in design and play a large role in mentoring the team. You will be working in a collaborative environment with a great team of engineers and scientists, and you will also interface directly with clients. Key Responsibilities Provide input to those managing and executing multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects. Establish and facilitate connections with other departments to support and enhance service delivery. Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules and budgets are met. Support and collaborate on new business opportunities with new and existing clients, as well as supporting business development efforts for electrical work. Manage and mentor junior staff. Design modifications to, or entirely new, electrical, instrumentation and balance of plant systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations. Manage and execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors. Design modifications to, or entirely new, electrical, instrumentation, protection, and balance of plant systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations. Perform electrical calculations. Conduct inspections and support project work on site as required. Edit and prepare design specifications. Provide detailed designs and coordination of facilities with team members. Conduct QA/QC reviews and provide leadership and mentoring related to KGS's QA/QC process. Contribute to the development of the electrical engineering practice at KGS by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned. About You Minimum of a Bachelor of Science (BS) degree in Electrical Engineering from a recognized university. A post graduate degree would be an asset. Minimum of 15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules). Must be registered as a Professional Engineer (P.E.) in California, Oregon, or Washington, as well as eligible for registration as a professional engineer in other states by comity through NCEES. Demonstrated leadership of electrical design projects in the industrial power generation field, with experience managing and mentoring younger staff. Previous consulting experience is preferred. Excellent verbal and written communication skills are required. Candidate must be able to work independently with minimal supervision. Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information. Demonstrated experience in site investigations, condition assessments, design and construction support are preferred. Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation, and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered. Experience with the following would be considered an asset: Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup) Lighting (including emergency and exit lighting systems) Fiber and copper structured cable systems, and associated networking equipment Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience) Protection systems experience, including specifying, setting and verifying (include reference to voltages) Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training) North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning Physical or cyber security planning or design Unit outage planning Other renewable energy experience Travel to project sites is usually limited but is required depending on project/client requirements. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks. Have a drive, attitude, and commitment to being an active participant in our employee-owned culture is a must. The salary range for this position is $130,000 to $180,000 annually. Please note that the salary ranges mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.

About Helion We are a fusion power company based in Everett, WA, with the mission to build the world's first fusion power plant, enabling a future with unlimited clean electricity. Our vision is a world with clean, reliable, and affordable energy for everyone. Since Helion's founding in 2013, we have raised over $1 billion from long-time investors such as Sam Altman, Mithril, and Capricorn Investment Group as well as new investors SoftBank and Lightspeed to propel us forward. Our last prototype, Trenta, completed 10,000 high-power pulses and reached plasma temperatures of 100 million degrees Celsius (9 keV). We are now operating Polaris, our next prototype on the path to the world's first fusion power plant. This is a pivotal time to join Helion. You will tackle real-world challenges with a team that prizes urgency, rigor, ownership, and a commitment to delivering hard truths - values essential to achieving what no one has before. Together, we will change the future of energy, because the world can't wait. What You Will Be Doing: You will play a critical role in supporting the core electrical energy management systems that power our fusion generators. This includes systems responsible for energy delivery to magnetics, fusion energy recovery, and redistribution networks. This onsite role reports directly to the Senior Manager of Electrical Engineering at our Everett, WA office. You Will: Design, test, troubleshoot, and support operation of high voltage electrical power systems for driving pulsed magnetic coils Oversee design, procurement, construction, and commissioning of high-power electrical systems to drive pulsed coils ( Develop electrical system architecture and work with designers to produce electrical schematics and installation drawings Develop cost-effective, scalable, and reliable design solutions via technical peer review through a design review process for each major design project Collaborate with operators of generator power systems through machine commissioning and, for development machines, through the lifetime of the machine Demonstrate rigorous engineering practices including management of cost, schedule, and resource estimates as they pertain to your design, build, and delivery timelines Required Skills: 5+ years experience in power electronics, solving complex electrical engineering problems from design to delivery Bachelor's or Master's level degree in Electrical Engineering, Physics, or a related technical field Experience in design, fabrication, installation and test of electrical systems Strong background with solid state switching technologies and understanding of operating characteristics of power electronic components such as IGBTs, power MOSFETs, and SCRs Technical expertise in the application of engineering concepts, principles, codes, and theory, and practice with the ability to coordinate workloads to meet established deadlines or milestones with some experience in project leadership Advanced in electronic troubleshooting systems using standard benchtop tools such as oscilloscopes, Eloads, pulse generators, spectrum analyzers, and PCB design software Experience with Microsoft Suite, LTSpice, SIMtrex/Simplis, Altium, Matlab #LI-Onsite #LI-KL1 Total Compensation and Benefits Helion's compensation package includes a competitively benchmarked base salary, meaningful equity grants, and comprehensive benefits. Final compensation is determined through a holistic evaluation of your experience, qualifications, and our commitment to internal equity - ensuring fairness and transparency across our teams. We are committed to fostering a fair and equitable environment in every aspect of our operations, including compensation. This is an exempt salaried role. Annual Base Pay $165,000 - $200,000 USD Benefits Our total compensation package includes benefits, including but not limited to: • Medical, Dental, and Vision plans for employees and their families • 31 Days of PTO (21 vacation days and 10 sick days) • 10 Paid holidays, plus company-wide winter break • Up to 5% employer 401(k) match • Short term disability, long term disability, and life insurance • Paid parental leave and support (up to 16 weeks) • Annual wellness stipend Helion is an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need assistance or an accommodation during the interview process, please let us know.

Since 1975, Nytec's mission has been to set the standard in hiring highly trained and experienced engineers and technicians in both hardware and software services. We build lasting relationships with our clients by creating secure and reliable technical services, providing on-site/off-site staff, and test management solutions. As a full service engineering company, we take products from inception to delivery and elevate software to the next level. Job Description Nytec is looking for an electrical engineer with knowledge and experience in electrical design and product development. This person will have experience in high level and detailed product design, schematic entry, analog simulation, prototype assembly logistics, board bring-up, lab debugging, system integration, and troubleshooting. Requirements: • Complete understanding and wide application of technical principles, theories, and concepts in the field of electrical engineering, including but not limited to design of digital and analog circuits, moderate to complex mixed signal, component selection, guidance of PCB layout, design for EMC and DFM. • Experience with test fixture design, construction and automation. • Software and test authoring experience. • Ability to translate system performance and operational specifications into requirements, designs and specifications, and verification plans and protocols. • Ability to document and review designs using the established development process, work with mechanical, software, manufacturing and operation teams to support release to manufacturing. • Ability to manage other technical employees Technical Skills: • Electrical/Mechanical digital and analog signal analysis and troubleshooting (expert with scopes/analyzers/analog sensors) • Ability to read schematics and perform Circuit Board analysis • Knowledge of thermal chambers and cart building is preferred • Able to read design specifications and develop relevant test cases • MS products/process knowledge (Product Studio, SharePoint, Office, Excel) is preferred, but not required Additional Skills: • Be able to execute duties and lead others with little to no supervision • Highly motivated individual with strong project orientation and communication skills • Flexible and able to learn new concepts quickly; strong problem solving and troubleshooting skills • Able to work in a fast-paced environment and comfortable with ambiguity • Be concise and clear in email and documented communications • Set and track their own project and task level priorities; maintain schedules and meet deadlines • Be timely with reporting and test execution Education: • Bachelors' degree in Electrical Engineering or closely related field is required TO APPLY: Email your resume/cover letter to ' [email protected] ' or visit our website at ************** Additional Information All your information will be kept confidential according to EEO guidelines.

This role supports passenger vehicle R&D via the testing/validation of electrical systems and components. We are looking for engineers with experience test/validating any of the following systems and their components: * Electrical Control Units * Starter Motor * Generator * Electrical Charge\-Discharge Controls * Powertrain/Chassis/Engine sensors and controls * Audio Systems * Navigation Systems * Camera Systems * In\-Vehicle Entertainment * Telephonic Systems * Driver Displays The primary job activities are: * Develop electrical, performance, and functional requirements for new passenger vehicles * Investigate and understand the functional requirements (including hardware, software, and communication) for assigned systems and components * Setup test equipment, collect test results/data, verify test accuracy and completeness, analyze results, summarize findings, present reports, and coordinate with stakeholders to address issues * Develop, write, and issue related engineering specifications as required * Brainstorm, develop, propose, and justify new related functions and systems to meet the market requirements * Ensure all necessary system/component testing is completed...performing some basic electrical testing by oneself as needed. Responsible to ensure assigned systems and components achieve product acceptance for mass production. * Develop all necessary reports, presentations or technical documents to explain and/or make a record of the development process and activities * Support factory, sales, suppliers, etc. as required for product explanations, owner\'s manual reviews, manufacturing issues, supply concerns, or market complaints RequirementsRequired Experience2 to 6 years in an electrical test position within a transportation industry (automotive, heavy truck, off\-road vehicles, ag equipment, aerospace, specialty vehicle, etc) Required EducationB.S. in Electrical Engineering or related discpline Required SkillsProven ability to independently test/validate electrical systems and component within a transportation application context Test data acquisition (sensor setup, data collection)Strong technical communication (English) \- both written and oral Basic hand\-on mechanical skills as you will be helping prepare test vehicles, troubleshooting issues, and proposing solutionsSelf driven and able to complete tasks independently Personal time and task management Desired SkillsEngine testing (dyno) CAN communication development Embedded system development BenefitsOvertime pay (1x base rate) Paid Time Off Paid Holidays Health, Dental, Vision Insurance Life and Disability Insurance