Electrical engineer internship jobs in Salt Lake City, UT - 231 jobs

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Defense Systems is seeking an Associate Electrical Engineer/ Electrical Engineer. This position is located in Roy, UT supporting the Sentinel program. What You'll Get To Do: Design of electrical systems in accordance with scope of work. Evaluate vendor documents to ensure specifications and data sheet requirements are met. Review documentation such as but not limited to schematics, diagrams, equipment data sheets, hazard area classification drawings, and electrical analysis or studies developed by other engineers and designers. Review application of codes and standards for compliance and correct interpretation of Electrical designs. Participate in the delivery of Electrical design Technical Data Packages (TDP), Issue-for-Construction (IFC) packages, as-built TDPs, PDPs, interface models, and additional design artifacts. Analyze trade studies to evaluate alternative design solutions to resolve technical issues. Develop and present design change requests, coordinate with impacted internal and external stakeholders, to ensure configuration control of the technical baseline. Identify risks and opportunities associated with or driven by design factors. Develop and mature Electrical designs that meet Weapon System requirements, UFC, MIL-STD, and other applicable codes and regulations. Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Collaborating and communicating with multi-functional teams and all collaborators. Able to work independently with minimum supervision, positive demeanor and highest ethics. Proactively seek information and direction to successfully complete the statement of work. Job Qualifications: You'll Bring These Qualifications: Associate Electrical Engineer: A Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university Position can be filled one level higher, Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline and 2 years experience or 0 years and a MS Required: Must be a US Citizen with an active DoD Secret Clearance, at time of application, current and within scope, with an investigation date within the last 6 years Must have the ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business needs These Qualifications Would be Nice to Have: Experience resolving issues and providing technical support Capable of working with minimal direction and in team environments. Experience with ETAP or SKM PTW32 for short circuit analysis, coordination studies, and arc flash studies. Electrical design experience in CAD such as NX/Revit Experience working with external customer to meet program expectations in a timely and efficient manner. Experience with maintenance and reliability engineering Experience using the following tools: ANSYS, MATLAB, or equivalents Teamcenter/CPLM experience Continuous Process Improvement experience Experience with Agile Knowledge of various data transmission formats (eg. Serial, TCP/IP, Fiber etc) working experience utilizing power system design, and/or analysis software tools, such as ETAP, PSS/E, SKM or PSCAD. working experience designing, troubleshooting (RCA) and/or implementing ground power systems, facility power systems and/or launch power systems. Knowledge of industry/military codes and standards, including the IEEE, NEC, NESC, NFPA, IEC, and UFC. As a full-time employee of Northrop Grumman Space Systems, you are eligible for our robust benefits package including: - Medical, Dental & Vision coverage - 401k - Educational Assistance - Life Insurance - Employee Assistance Programs & Work/Life Solutions - Paid Time Off - Health & Wellness Resources - Employee Discounts This positions standard work schedule is a 9/80. The 9/80 schedule allows employees who work a nine-hour day Monday through Thursday to take every other Friday off. This role may offer a competitive relocation assistance package. Primary Level Salary Range: $65,800.00 - $98,800.00Secondary Level Salary Range: $79,300.00 - $118,900.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Schedule: Full time - Year round Travel: Roughly 30% Currently seeking an Electrical Engineer for a national engineering firm which offers complete planning, process engineering, facility development, and construction management services. Preferred experience of designing and specifying the following systems: • Normal and Emergency power distribution system; one-line, riser and layout drawings • Switchgear, switchboards, Distribution Panels, panelboards and dry-type step down transformers • Medium Voltage distribution equipment, cabling, terminations, etc. • Generators, Transfer switches, etc. • Pad Mounted transformers • Bonding and grounding • Fire Alarm Systems Should be capable of performing the following design items: • Short Circuit, Power System and Arc flash Hazard Analysis Studies. • Voltage drop, conductor de-rating and power factor correction calculations • Lighting photometry calculations. A working knowledge of the following would be beneficial: • AutoDesk Building Systems 2010 (Electrical Systems and 3D layouts) NFPA 20, 70, 70E, 72, 101, 110 & 450 IEE 1584 REQUIRED: • 5+ years of experience • Candidates without a minimum of a Bachelors' degree will not be considered. • PE or EIT certificate preferred • Ability to travel to project sites as needed Not accepting applications from candidates who will require visa sponsorship. Only candidates who are U.S. Citizens, lawful residents, or are otherwise authorized to work in the US without employer sponsorship will be considered. The successful candidates will be professional, self-motivated, energetic and enthusiastic with excellent communication and inter-personal skills. Compensation includes base salary (based on experience) plus eligibility for performance bonus, profit share, 401k employer contribution, health/dental/disability/life benefits, flexible spending and paid vacation.

Full-time Description C&I Engineering is looking for a talented and driven individual to join our team! About the opportunity: Staff Electrical & Instrumentation Engineer We are currently seeking a full-time Staff Electrical & Instrumentation Engineer in our office to help us achieve our company mission. C&I is a full-service engineering design firm providing engineering/design/project management and procurement services to various clients in oil & gas, food & beverage, and distilled spirits. Responsibilities include: Prepares complete design packages, including construction scope of work, for complex industrial projects that meet design intents and customer expectations. Designs are well coordinated with other departments. Creates lists of engineering deliverables and tasks, and estimates effort hours based on limited scopes of work for complex projects. The Staff Electrical and Instrumentation Engineer mentors junior staff, assists in the training and development of others, and identifies training needs for the department chief. Creates a plan of execution for large and complex projects, anticipating the sequence of tasks, long lead and special items for the engineering procurement cycle, and dependencies of information from others. Works within the project team to integrate the department plan into a multi-discipline project plan of execution. As a Staff Electrical & Instrumentation Engineer, this individual prepares computer analyses and calculations. Uses vendor documents, coordination prints, surveys, and models to check dimensions, determine interface points, determine physical space requirements, and provide information to other departments. etc. Specifies process instrumentation (level, pressure, flow, temperature, etc.) Helps develop P&IDs and create typical electrical and instrumentation design documents. Minimum requirements: Bachelor's degree or higher from an ABET-accredited engineering program with a minimum of 10 years of related work experience, or a bachelor's degree or higher from an ABET-accredited engineering technology program with 12 years of relevant experience. Ability to travel domestically or internationally to offices, vendor shops, and project sites. Travel may be up to 10% Must comply with drug-free workplace requirements. Must be able to obtain a Transportation Worker Identification Credential (TWIC) and pass any required background checks. Performs work in a safe manner in accordance with C&I and client requirements. Valid Driver's License Qualifications that set you apart: Professional Engineer License Leadership experience Why join us: Employee Owned ESOP 401k Health Insurance Dental & Vision Optional 4-day Work Weeks Salaried Employees are Paid Straight Time for Hours Worked Over 40 Our core values include: People: Building our company on diversity, development, and experience Quality: Doing the right things right Ownership: Holding ourselves and our teams accountable for results Service: Understanding our partnership and providing valued solutions Meet most but not all requirements? At C&I, we are dedicated to fostering a diverse and inclusive community that celebrates dedication and passion as much as past experience. If you are excited about this role and joining our team, we encourage you to still apply! You could be the perfect fit for this (or another) role. C&I is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, physical or mental disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Salary Description $130,000 to $185,000 Per Year

Job DescriptionSalary: Hunt Electric, Inc.is seeking an Electrical Designer to join our team Preconstruction Team. TheElectrical Designer needs to be sharp, driven, and constructability minded. The Electrical Designer will be at the center of planning, design, and prefabrication coordination. This position bridges the gap between design and construction using a combination of tools including software documentation, knowledge of field installation, and working with our project management and VDC teams. Major Duties: Ability to adhere to detailing standards. Build, and edit preconstruction electrical drawings using Bluebeam and Excel Generate accurate takeoffs, product counts, and support estimating efforts. Put together schedules, worksheets, and documentation correctly. Serve as a go between with the field, engineering, management, and technical teams. Track progress, timelines, and team deliverables to ensure quality and consistency. Prepare, review, manage all aspects of the preconstruction drawings. Facilitate meetings and manage details. Ability to work independently but also work well within a team setting. Creative and out of the box thinking with attention to detail. Ability to think practical based, relying on field experiences. Experience on real world projects, understanding installation logic. Time management skills. Can read and understand construction drawings and blueprints. Ability to use a computer. Leadership and teaching skills. Other duties or locations as assigned by manager. Minimum Qualifications: 2+ years experience in electrical installation, preferably as a superintendent or electrical projects. Interest in learning the construction detailing aspect of electrical installation. Microsoft Office products including Excel and Word experience. Knowledge of Autodesk, ACAD, Revit, Navis, or drafting/design. Experience with electrical construction estimating or project management is a plus. Experience in electrical detailing/design including electrical code, contract compliance, submittal review, and specification interpretation a plus. As a full-time Electrical Designer, you would also be eligible for an excellent benefits package, including medical, dental, life insurance, short and long-term disability, a 401(k) plan, and paid personal time (PTO). About Hunt Electric Hunt Electric, Inc. is a full-service electrical, technology, and infrastructure contractor with wide-reaching services available in a variety of markets. Headquartered in Salt Lake City, we have additional branch locations in Denver, CO, St. George, UT, and Boise, ID. Since 1986, we have experienced tremendous growth with plans to continue expanding our services and markets served. If you are looking for a merit-based company where you can improve your skills, grow your career, and enjoy your work, look no further and apply today! As a thriving Utah-based business,were looking for enthusiastic, positive people to come on board with us andbuild successful, long-term careers.We believe in making an investment in each employees strengths. Hunt Electric is a place where you willlearn, grow, contribute, and lead.Thats why we offercompetitive pay and fantastic benefits.If this sounds like the career opportunity you've been looking for, apply today! Work Schedule This is a full-time position with a typical working schedule of Monday - Thursday 7:00am - 4:30pm and Friday 7:00am - 2:00pm

Electrical Systems Engineer Stadler offers a wide range of international career opportunities. Here you get the chance to expand your potential, take on meaningful responsibilities, and deliver outstanding performance within dedicated teams. We are looking for motivated individuals who want to shape the mobility of tomorrow with us. Are you ready to achieve great things with us? As an Electrical Systems Engineer, you will play a key role in the integration and design of complex electrical systems across the vehicle platform. This includes specifying and electrically integrating subcontractor systems such as entry systems, HVAC, fire protection, and lighting. You will design and develop on-board power distribution and supply networks from the main power converter to auxiliary systems, including the onboard, battery, and control power systems. Additionally, you will contribute to the control and operation architecture of the vehicle, designing critical functions and systems such as safety and assistance features, driving data recording, control technologies, train protection, and train communication networks. Key Activities Design of electrical components and specification of systems, functions and associated interfaces in compliance with project requirements Integration of assigned electrical equipment and systems into rail vehicles and responsibility for their proper functioning in the vehicle Preparation of engineering documentation, such as concepts, specifications, electrical schematic templates, software requirements, type test specifications and verification documents Verification and validation of systems through final approval Provide technical support of type tests and troubleshooting Technical clarifications and cooperation with internal and external project partners (customers and suppliers) in an international environment Development and optimization of systems in interdisciplinary teams in compliance with customer specifications, standards and internal requirements Technical support for the preparation of offers and tenders Qualifications BS or MS in Electrical or Mechatronic Engineering 4+ years of relevant experience in railway, defense, aerospace or similar Excellent communication and technical writing skills Excellent problem-solving abilities with strong teamwork skills Business fluent in English (German is a plus) Experience with schematic software, MS Office, PLM and ECN systems (e.g. E3, SmarTeam) Willingness to travel for training, supplier visits and testing on vehicles What we offer Stadler US employee benefits package includes: Competitive Pay (plus Profit Sharing potential) Low-cost, comprehensive Medical / Dental / Vision / Rx plans 401(k) with employer match after 90 days Generous Paid Time Off / 9 Paid Holidays / Extended Paid Holiday (Dec. 25 - Jan 1) Paid training / Career development Tuition and training reimbursement Paid maternity and parental leave Company-paid life and disability insurance Referral bonus program Stadler US is an Equal Opportunity Employer

Stadler offers a wide range of international career opportunities. Here you get the chance to expand your potential, take on meaningful responsibilities, and deliver outstanding performance within dedicated teams. We are looking for motivated individuals who want to shape the mobility of tomorrow with us. Are you ready to achieve great things with us? HOW YOU CAN MAKE AN IMPACT As an Electrical Systems Engineer, you will play a key role in the integration and design of complex electrical systems across the vehicle platform. This includes specifying and electrically integrating subcontractor systems such as entry systems, HVAC, fire protection, and lighting. You will design and develop on-board power distribution and supply networks from the main power converter to auxiliary systems, including the onboard, battery, and control power systems. Additionally, you will contribute to the control and operation architecture of the vehicle, designing critical functions and systems such as safety and assistance features, driving data recording, control technologies, train protection, and train communication networks. Key Activities * Design of electrical components and specification of systems, functions and associated interfaces in compliance with project requirements * Integration of assigned electrical equipment and systems into rail vehicles and responsibility for their proper functioning in the vehicle * Preparation of engineering documentation, such as concepts, specifications, electrical schematic templates, software requirements, type test specifications and verification documents * Verification and validation of systems through final approval * Provide technical support of type tests and troubleshooting * Technical clarifications and cooperation with internal and external project partners (customers and suppliers) in an international environment * Development and optimization of systems in interdisciplinary teams in compliance with customer specifications, standards and internal requirements * Technical support for the preparation of offers and tenders QUALIFICATIONS * BS or MS in Electrical or Mechatronic Engineering * 4+ years of relevant experience in railway, defense, aerospace or similar * Excellent communication and technical writing skills * Excellent problem-solving abilities with strong teamwork skills * Business fluent in English (German is a plus) * Experience with schematic software, MS Office, PLM and ECN systems (e.g. E3, SmarTeam) * Willingness to travel for training, supplier visits and testing on vehicles YOUR BENEFITS YOUR CONTACT PERSON Jennifer Hood Talent Acquisition Specialist ***************

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $63,795 to - $164,301 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0855 Electronics Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857056-0855-CYBER Control number 852987000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Use engineering manuals, standard publications, and technical material to obtain information and pertinent data for use by higher level engineers, contractors and/or customers. * Keep abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments. * Perform duties in support of the installation, operations, and maintenance of weapon systems, subsystems, facilities, machinery, and/or support equipment. * Perform developmental assignments in the application of established principles, techniques, methods, and procedures of professional electronics engineering in the area of installation, operations, and maintenance. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: At least one year of specialized experience equivalent to at least the GS-09 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Modeling and simulation professional theories, concepts, principles, techniques, and practices of computer engineering, electronics engineering and/or computer science. GS-12: At least one year of specialized experience equivalent to at least the GS-11 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Leading and/or performing engineering work involving electronic circuits, circuit elements and equipment systems; applying a number of diverse electronics engineering practices, techniques and processes to identify and resolve complex engineering issues; supporting the planning, testing and troubleshooting of electronics engineering systems or devices; and, developing computer aided engineering analysis and tools in support of planning and designing applications. GS-13: At least one year of specialized experience equivalent to at least the GS-12 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-14: At least one year of specialized experience equivalent to at least the GS-13 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-15: At least one year of specialized experience equivalent to at least the GS-14 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of electronics engineering concepts, principles, methods, techniques, and standard engineering practices to perform moderately difficult or relatively limited phases of a larger and more complex installation, operations, and maintenance engineering project. * Knowledge of computer aided design and drafting (CADD) programs to perform design and drafting assignments, as well as other computer applications used in support of plans, analysis, and project reports. * Skill in applying the principles, concepts, and practices of the occupation sufficient to perform limited assignments in the field of electronics engineering. * Ability to communicate factual and procedural information clearly, orally and in writing. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to: Responsibilities Designing electrical systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities. Documenting all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc. Maintains project document organization Manage time and meet commitments Understands Ohms Law, AC/DC, Electric and magnetic fields Understands power system theory - 3-phase vector math, power factor, symmetrical components Understands capacitors, inductors, and resonance Designing lighting for food processing spaces, including lighting calculations for emergency and inspection lighting level needs. Coordinating fixture placement/mounting with other trades. Designing fire alarm systems per NFPA 72, 101, and local building code. Code expertise - NEC, NFPA 72/101/, IBC Specify means and methods Specify other common work - grounding, start-up, LV & MV Cables Specify equipment Designing low voltage systems such as LAN, phones, PA, Wi-Fi, access control, cameras, etc. Create power plans Create power one line and panel schedules Define fire alarm requirements per IBC and NFPA 101 Define Low Voltage Systems Review scope with client - create and manage needs list Producing bid documents consisting of layout drawings, one-line, riser, schedules, details, and specifications. CAD - add 2D & 3D devices to Xrefs Procuring long lead light fixtures and power distribution equipment such as switchgear, switchboards, panelboards, transformers, MCC's, generators, variable speed drives, and UPS's. Transformer configurations Perform short circuit calculations identifying deficiencies or series ratings Estimate weights of main tray/trapezes and equipment needing support Assist in managing electrical bid process for clients, observing construction, and assisting with startup. Project planning and feasibility studies. Actively participating in and supporting department-wide standard development, updates, and maintenance. Researching electrical building/power materials and best practices Supporting talent growth within our organization Required Education Skills and Experience Bachelor of Science in Electrical Engineering or related field 4+ years of work experience in electrical systems for building power. 4+ years of work experience in designing lighting, fire alarm systems, and low voltage systems for building spaces, including lighting calculations, and coordinating fixture placement with trades. 4+ years of work experience in electrical bid documents and procuring electrical materials and equipment. 4+ years of work experience in AutoCAD, Revit or other related design programs. Relevant work experience in a manufacturing or construction setting preferred. PE tracked desirable. Travel to customer project sites for fieldwork, review, audit, and meetings, estimated 25%. Physical Requirements Prolonged periods sitting at a desk and working on a computer. Must be able to lift-up to 15 pounds at times. Travel Requirement Up to 25% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics. JOB CODE: 1002648

U.S. Citizenship is Required. Ability to qualify for a US Department of Defense Top Secret security clearance required. Candidate must be SAP and SCI program eligible. Full-time opportunity in Clearfield, Utah with relocation allowance. This position is in-person. Toyon Research Corporation is seeking an experienced Electrical Engineer to join our Advanced Concepts flight test team within the Aerospace Systems Group. The ideal candidate will have a solid foundation in electrical engineering principles with the ability to take ideas from concept through design, build, test, and delivery. This role is focused on prototype mixed-signal embedded hardware and offers the opportunity to contribute across all phases of product development in a highly collaborative environment. Responsibilities Perform system analysis, develop architectures, and create detailed electrical designs of advanced avionics and aerospace systems Design and build mixed-signal and embedded system circuits and custom PCBAs Drive hardware development from initial concept through fabrication, integration, and delivery Troubleshoot and resolve complex or unusual engineering challenges under tight timelines Collaborate across disciplines on multi-project teams Prepare and present technical material for design reviews Work effectively under evolving requirements in a fast-paced prototyping environment Requirements Bachelor's or advanced degree in Electrical Engineering or related discipline Minimum of 5 years of relevant experience in electrical engineering design and development Experience designing, assembling, and troubleshooting circuits and PCBAs Proficiency with EE CAD and simulation tools (Altium, OrCAD, KiCad, SPICE, etc.) Familiarity with scripting or analysis tools (Python + SciPy, MATLAB, etc.) Strong understanding of general EE principles including: o Analog and digital circuit design o Power distribution and regulation o Signal integrity, grounding, and EMI/EMC mitigation o Component selection, derating, and tolerance analysis o Electrical safety standards (UL, CE, IPC, MIL-STD) o ESD handling and design practices Knowledge of design documentation and version control best practices (schematics, BOMs, revision control) Ability to interpret and apply industry standards and specifications (IPC-2221/610, MIL-STD-461, DO-160, etc.) Strong communication skills and ability to thrive in a collaborative, interdisciplinary setting WE OFFER AN EXCEPTIONAL EMPLOYEE BENEFITS PACKAGE! Competitive Industry Pay 100% Employer-Paid Medical Insurance Premium HSA with Employer Contributions Dental and Vision Coverage Options Paid Holidays Paid Vacation and Sick leave Company Funded 401(k) and Profit Sharing Plans Employee Stock Ownership Plan (ESOP) Life and Disability Insurance Paid Parental Leave Discretionary Bonus Eligibility The annual pay range for the Electrical Engineer position is $115,000 to $200,000. The posted pay range values provide the candidate with guidance on annual base compensation for the position, at a full time level of effort, exclusive of overtime, bonus, and benefits-related compensation, over a range of qualifications that may fit hiring objectives. Toyon Research Corporation will consider the individual candidate's education, work experience, applicable knowledge, skills and training, among other factors, when preparing an offer of employment. Pay Transparency Nondiscrimination Provision Equal Opportunity Employer including Disability and Veterans Applicant Privacy Notice Learn more about our company in our latest video, We are Toyon. The application window for this posting will remain open until the position is filled. Ref #2620-H

In this role, you will plan, develop, and review electrical engineering design work, produce drawings and documentation, and prepare design estimates for a project. You will coordinate with clients, facilitate technical discussions, and review key electrical drawings, calculations, and bid summaries. You will solve complex technical issues and ensure electrical designs comply with all regulations and standards. This position is for a SmartPlant 3D Designer who will prepare electrical 3D designs as well as 2D electrical AutoCAD and SmartSketch designs to support new facility infrastructure design for DOD and USAF projects. The successful candidate must have strong organizational and teamwork skills, proven problem-solving abilities, can-do attitude, and the desire to innovate designs. #LI-SNH Major Responsibilities: Leads or administers work of electrical designers and drafters for a business line technology to include the preparation of layouts, study drawings, detailed 2-D and 3-D Computer Aided Design (CAD) design models and construction drawings. Develops designs for complete and complex electrical engineering systems such as earthwork, drainage, road design, foundation, and steel detailing with minimum supervision from which detailed scale models and/or construction drawings are completed. Ensures electrical systems designs comply with all applicable installation codes, regulations, and standards. Assists in constructing detailed scale models. Prepares or assists with the preparation of assigned material requisitions and bid evaluations. Monitors and checks work for compliance with approved electrical design standards to provide quality design, reliable/safe plant operation, and construction economy. Participates in constructability reviews. Prepares design and drafting procedures to standardize design effort. Coordinates or makes jobsite visits, as required, to resolve problems and interpret drawings and documents. Reviews electrical design scope changes, as required, for project management. Ensures electrical systems designs comply with all applicable installation codes, regulations, and standards. This role will support design development of electrical systems and equipment for the Sentinel project by preparing models, drawings, and evaluations, in accordance with applicable procedures, codes, standards, and contract requirements. The candidate will work with electrical engineers, junior designers, and other technical disciplines in a team environment with job responsibilities (include but not limited to): Supporting, coaching, and training less experienced designers. Modeling of electrical rooms, equipment, cable tray, conduit, conduit duct bank, lighting, receptacles, etc. In a Smartplant 3D model environment. Creating bill of materials and drawing installation details for the modelled items listed above in addition to grounding, lightning protection, support details, and other details using SmartSketch and AutoCAD. Performing calculations utilizing AGI 32 for lighting layouts and ETAP for ground grid layouts. Assist with coordination of 3D model activities, i.E. Input, interference reconciliation, etc. With other physical related disciplines. Responsible for physical design implementation by producing drawings of interior and exterior layouts/plans/elevation views of the raceway design (conduit/cable tray/duct bank), equipment location and layout, lighting layouts, lightning protection layouts, and grounding plans. Develop material specifications utilizing the software SpecsIntact. Coordinate with systems engineering department to establish and verify design/project requirements. Capable of independent creative design, with direction, using industry-proven concepts, and procedures. Ensures electrical systems designs comply with all applicable installation codes, regulations, and standards. Education and Experience Requirements: Requires AA/AS or Certificate in Engineering/CAD with 7-8 years of experience or 9-12 years of relevant work experience. Must be a United States citizen. Must be able to complete and pass pre-employment drug screen and background check. Required Knowledge and Skills: Knowledge & application of NEC code and NEMA/ANSI/IEEE Standards. Must have experience with an electronic Cable Management System, such as the SETROUTE program, and be able to input and complete corrections to the database. Must be able to collaborate well with other disciplines. Ability to cope with conflicting deadlines, frequent interruptions, and multiple tasks. Relevant experience includes, but is not limited to, drawings for electrical systems and equipment on nuclear or industrial process facilities, data centers, central utility plants, or complex building electrical systems. Hands-on and advanced experience using Smartplant 3D, SmartSketch, and AutoCAD. Excellent communication skills (both verbal and written). Ability to utilize engineering and office automation tools effectively. Broad knowledge of the application of electrical engineering design principles. Strong knowledge of electrical systems, schematics, and layouts. Knowledge of guides and standards. Thorough knowledge of engineering deliverables, such as drawings and specifications. Ability to express technical issues in a clear and concise manner, both written and verbally. Ability to resolve design issues independently and collaboratively with other engineering disciplines, construction, and the client. Modeling of piping, HVAC, and Mechanical equipment in a Smartplant 3D model environment. Previous DoD/DoE, USACE, NAVFAC, USAF, or NASA project experience. Experience working with procedures meeting quality assurance programs such as ISO-9000. $87-$97/hr. +PD

Work within the X-Ray Sources Development group focusing on the design of high voltage power supplies and controls used for driving X-Ray tubes. Work will center on component selection, evaluation of cross compatibility, and integration into new and existing product. This role is a hands-on position integral to a cross-functional team of engineers and technicians and under the oversight of more senior Electrical Engineers. Tasking will include a wide range of opportunities from board builds and evaluations, to component research and testing. Essential Functions: Work well in a design team environment Research, select, and evaluate electrical components, tools, and equipment Work with Development, Manufacturing, and Production resources on new and existing product designs Test and evaluate prototype board assemblies Plan, schedule, coordinate assigned activities and projects Participate actively in FMEA activities Document new build processes Empirical testing and complete root cause analysis Write Technical Reports Train and handoff newly developed processes and procedures to Manufacturing and Production personnel Management Responsibilities: Mentor and train Technicians and Production personnel by overseeing handoffs of tools and new processes, explaining design details, and assisting in documentation/integration Education and Experience: Bachelors of Science in Electrical Engineering or 5 years of related experience. Competencies: To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position. Practical knowledge of electrical components Able to use schematics while trouble shooting a circuit. Analytical problem-solving Analog/Digital circuit design and troubleshooting Technical writing/communication Familiarity with the Design and manufacture of PCBs Familiarity with OrCad or other PCB designer/layout tools Basic 3D modeling skills using Solidworks or equivalent

Full-Time | Location: Remote | Salary: $65,000-$75,000 (based on experience) Health, Dental, Vision, 401(k), PTO Included , Inc. Sure Steel, Inc. is a nationally ranked structural steel contractor delivering complex steel erection and fabrication projects across the United States. We are builders of integrity, innovation, and excellence, committed to safety, client satisfaction, and superior project delivery. Our people drive our reputation, and our values drive everything we do. Position Summary Sure Steel, Inc. is seeking a detail-oriented and motivated Junior Engineer to support project teams with technical coordination, constructability reviews, field engineering, and steel erection planning. This role offers hands-on exposure to structural steel construction while providing opportunities to grow into a lead technical or project management role. This is a fully remote position with occasional travel to job sites or regional offices. The ideal candidate will have 2-3 years of relevant experience in engineering or steel construction and a strong desire to grow in a high-performing, field-driven environment. Key Responsibilities Support engineering reviews of structural steel drawings, connection details, and erection plans Assist in coordinating with detailers, fabricators, engineers, and field teams Perform quantity takeoffs and layout calculations to aid project planning Create sketches, markups, and lift planning diagrams as directed Conduct constructability reviews and suggest design or sequencing solutions Visit job sites to support field layout, connection troubleshooting, and technical coordination Assist in tracking RFIs, submittals, and engineering changes Participate in engineering and safety meetings to gain real-world understanding of jobsite dynamics Develop proficiency in Sure Steel's modeling, planning, and technical systems Ensure compliance with internal engineering standards and safety protocols Qualifications Bachelor's degree in Civil, Structural, or Construction Engineering (or equivalent experience) 2-3 years of experience in steel erection, engineering, or construction support (internships/co-ops accepted) Familiarity with steel connection types, construction drawings, and field processes Working knowledge of AutoCAD, Bluebeam, and Microsoft Office; exposure to Tekla or similar 3D software is a plus Eagerness to learn, contribute, and grow in a collaborative and fast-paced environment Strong communication, critical thinking, and problem-solving skills Ability to travel occasionally to job sites for technical support Must pass pre-employment background check and drug screening What We Offer Competitive salary, negotiable based on experience Medical, dental, and vision insurance 401(k) with company match Paid time off and paid holidays National project exposure and hands-on learning opportunities A collaborative, safety-first, and performance-driven culture Equal Opportunity Employer Sure Steel, Inc. is an equal opportunity employer. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state, or local law. ADA & Employment Status Notice We comply with the Americans with Disabilities Act (ADA) and applicable laws to ensure reasonable accommodations are available when needed. This position is classified as Exempt under the Fair Labor Standards Act. Employment is at-will unless stated otherwise in writing. Core Values: Ability, Integrity, Benevolence, Safety, Continuous Improvement, and Environmental Responsibility.

Position Overview B&T USA is seeking a motivated and detail-oriented Junior Engineer to join our dynamic team in the firearms industry. The ideal candidate will have a strong understanding of SolidWorks, with the ability to create precise technical drawings and models. This role will support both engineering and manufacturing efforts, contributing to the development and production of high-quality products. Essential Duties and Responsibilities Manage engineering projects from start to finish, including design, development, testing, and production launch. Develop and maintain detailed 3D models and 2D technical drawings using SolidWorks. Apply DFM principles to ensure designs are optimized for efficient manufacturing and assembly. Collaborate cross-functionally with manufacturing, quality, and supply chain teams to ensure project success. Lead design reviews, provide technical guidance, and implement feedback to improve product performance and reliability. Conduct engineering analysis, including tolerance stack-ups, FEA, and material selection. Troubleshoot and resolve design and manufacturing issues throughout the project lifecycle. Prepare and maintain comprehensive project documentation, including specifications, reports, and timelines. Required Education, Experience and Skills Bachelor's degree in mechanical engineering or a related field, or equivalent practical experience. Proficient in SolidWorks, including 3D modeling and 2D drafting. Basic understanding of manufacturing processes, materials, and mechanical design principles. Strong attention to detail and organizational skills. Ability to work both independently and as part of a team in a fast-paced environment. Strong problem-solving skills and a proactive approach to tasks. Preferred Skills: Experience with GD&T (Geometric Dimensioning and Tolerancing). Familiarity with ERP systems and document control processes. Basic knowledge of firearms design. Work Environment: Work performed in an office and manufacturing environment. Exposed to machine shop manufacturing elements such as noise, dust, odors, fumes, etc. Physical Requirements Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position. Ability to lift and carry up to 25 lbs. Ability to sit or stand for extended periods of time. Frequently required to stand; walk; reach with hands and arms; and stoop or crouch. Job Type FT Hourly On-Site - May be required to work after-hours as needed to meet production demands. Benefits Company contributes 100% for employee HMO medical option. Dental Vision 401(k) Retirement Savings Plan including 4% matching contributions Disability Plans Company paid Life Insurance Paid vacation and sick leave Paid Holidays B&T participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. All offers of employment at B&T are contingent upon clear results of a thorough drug and background check. B&T provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, nation origin, pregnancy, disability status, protected veteran status, genetic information, sexual orientation, gender identity or expression, marital status or any other characteristics protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including advertising, recruiting, interviewing, hiring, placement, accommodations, promotion, termination, job assignments, layoff, recall, transfer, discipline, leave of absence, compensation, and access to benefits and training. All employment decisions are based strictly on job-related qualifications and abilities. About B&T USA B&T USA, a Florida-based firearms, suppressor, and accessories manufacturer operating under license of B&T AG SWITZERLAND, which was founded in 1991 as a designer and manufacturer of the industry's most advanced suppressors. Under the leadership of Karl Brügger, B&T AG has evolved into a world leader in the design, manufacture, and sale of the most technologically advanced, high-performance weapons systems in the world used globally by police, special forces, elite military units and private citizen consumers. B&T USA and all our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules, and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for creating innovative solutions.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Overview:Marathon Petroleum Corp. (MPC) offers internship and co-op opportunities to high-performing college students who want meaningful hands-on experiences in their fields of study. The following core values guide MPC's approach to doing business: safety and environmental stewardship; integrity; inclusion; collaboration; and excellence. Interns/co-ops work side-by-side with experienced professionals as contributing members of diverse work teams who create value for the company's shareholders. MPC believes that how we conduct our business is just as important as the bottom line. About the Logistics & Storage (L&S) Organization:The Logistics & Storage organization is the link between the Refining and Marketing components of Marathon. L&S transports crude oil and refined products to and from the refineries and onto storage terminals for distribution to retail marketing facilities, via pipelines and marine transportation operations. Logistics & Storage is comprised of four primary components: Logistics & Storage Engineering (L&SE) - L&SE provides engineering design and project management services to Terminals, MPL, and Marine. Terminals - Terminals play a prominent role in enhancing life's possibilities by blending, distributing, and delivering quality products in a safe, reliable, and competitive manner. Marathon Pipe Line Company (MPL) - MPL operates pipeline systems that move crude oil from production fields, other pipeline companies, and offshore platforms to MPC refineries, other refineries, and other pipeline systems. MPL also operates pipeline systems that move refined products from refineries to product terminals. Marine - Maintains and operates a large private inland petroleum products barge fleet, which is used to ship crude oil, intermediates, and refined products. Responsibilities:The purpose of the Logistics and Storage intern/co-op program is to identify and develop future technical and leadership talent for the benefit of MPC, the engineering intern/co-op, and the engineering profession. The intern/co-op program may consist of any number of work sessions. Multiple sessions give interns/co-ops the ability to rotate between the different L&S components in order to gain exposure to the various business segments and to offer a variety of assignments with increasing responsibility. Intern/Co-ops will gain experience in the 5 phases of the Marathon Project Management Process (MPMP) including Conceptual, Feasibility, Definition, Implementation, and Start-up/Close-out. Other responsibilities may include: + Development of project scope + Engineering oversight + Technical design + Cost estimating + Schedule development + Evaluating and summarizing bid sets + Construction supervision + Safety leadership + Coordination with operations groups + Project documentation + Travel ranges from 15-45% Qualifications: + Candidates must be pursuing a Bachelor's degree in Civil, Electrical, or Mechanical Engineering. + Concurrent enrollment in a Bachelor's degree seeking program for the duration of the experience. + Strong academic performance. + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Availability to work 40 hours per week. + Positions are available Spring, Summer, and Fall semesters. + Availability for multiple work terms is preferred. + Many projects will require travel to construction sites; therefore, a valid driver's license is required. + Military experience a plus. + MIN - $32.92 per hour / MAX - $41.67 As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00020050 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: La Palma, California, Salt Lake City, Utah Education: Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman is seeking Electrical Engineers . This position will be located at our Defense Systems Sector in Roy, UT. This requisition may be filled at either an Associate Electrical Engineer (T01) or an Electrical Engineer (T02). The qualified candidate will become part of Northrop Grumman's Strategic Deterrent Systems Division (SDSD). Basic Qualifications: A candidate must meet ALL of the below criteria. The candidate must: Be completing or has completed their degree (Bachelor's, Master's, or PhD) from an accredited institution. Be majoring in or having majored in Electrical Engineering, Computer Engineering or Manufacturing Engineering. Be able to obtain a U.S. Government security clearance (U.S. citizenship is a pre-requisite). Preferred Qualifications: Have an overall cumulative GPA of 3.70/4.0 or higher Current active Secret Security Clearance or higher Salary Range for Roy, UT: Associate Electrical Engineer (T01) - $63,900 - $95,900 Electrical Engineer (T02) - $77,200 - $115,800 campusjobs The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Job DescriptionDescription: C&I Engineering is looking for a talented and driven individual to join our team! About the opportunity: Staff Electrical & Instrumentation Engineer We are currently seeking a full-time Staff Electrical & Instrumentation Engineer in our office to help us achieve our company mission. C&I is a full-service engineering design firm providing engineering/design/project management and procurement services to various clients in oil & gas, food & beverage, and distilled spirits. Responsibilities include: Prepares complete design packages, including construction scope of work, for complex industrial projects that meet design intents and customer expectations. Designs are well coordinated with other departments. Creates lists of engineering deliverables and tasks, and estimates effort hours based on limited scopes of work for complex projects. The Staff Electrical and Instrumentation Engineer mentors junior staff, assists in the training and development of others, and identifies training needs for the department chief. Creates a plan of execution for large and complex projects, anticipating the sequence of tasks, long lead and special items for the engineering procurement cycle, and dependencies of information from others. Works within the project team to integrate the department plan into a multi-discipline project plan of execution. As a Staff Electrical & Instrumentation Engineer, this individual prepares computer analyses and calculations. Uses vendor documents, coordination prints, surveys, and models to check dimensions, determine interface points, determine physical space requirements, and provide information to other departments. etc. Specifies process instrumentation (level, pressure, flow, temperature, etc.) Helps develop P&IDs and create typical electrical and instrumentation design documents. Minimum requirements: Bachelor's degree or higher from an ABET-accredited engineering program with a minimum of 10 years of related work experience, or a bachelor's degree or higher from an ABET-accredited engineering technology program with 12 years of relevant experience. Ability to travel domestically or internationally to offices, vendor shops, and project sites. Travel may be up to 10% Must comply with drug-free workplace requirements. Must be able to obtain a Transportation Worker Identification Credential (TWIC) and pass any required background checks. Performs work in a safe manner in accordance with C&I and client requirements. Valid Driver's License Qualifications that set you apart: Professional Engineer License Leadership experience Why join us: Employee Owned ESOP 401k Health Insurance Dental & Vision Optional 4-day Work Weeks Salaried Employees are Paid Straight Time for Hours Worked Over 40 Our core values include: People: Building our company on diversity, development, and experience Quality: Doing the right things right Ownership: Holding ourselves and our teams accountable for results Service: Understanding our partnership and providing valued solutions Meet most but not all requirements? At C&I, we are dedicated to fostering a diverse and inclusive community that celebrates dedication and passion as much as past experience. If you are excited about this role and joining our team, we encourage you to still apply! You could be the perfect fit for this (or another) role. C&I is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, physical or mental disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Requirements:

The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to: Responsibilities * Designing electrical systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities. * Documenting all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc. * Maintains project document organization * Manage time and meet commitments * Understands Ohms Law, AC/DC, Electric and magnetic fields * Understands power system theory - 3-phase vector math, power factor, symmetrical components * Understands capacitors, inductors, and resonance * Designing lighting for food processing spaces, including lighting calculations for emergency and inspection lighting level needs. Coordinating fixture placement/mounting with other trades. * Designing fire alarm systems per NFPA 72, 101, and local building code. * Code expertise - NEC, NFPA 72/101/, IBC * Specify means and methods * Specify other common work - grounding, start-up, LV & MV Cables * Specify equipment * Designing low voltage systems such as LAN, phones, PA, Wi-Fi, access control, cameras, etc. * Create power plans * Create power one line and panel schedules * Define fire alarm requirements per IBC and NFPA 101 * Define Low Voltage Systems * Review scope with client - create and manage needs list * Producing bid documents consisting of layout drawings, one-line, riser, schedules, details, and specifications. * CAD - add 2D & 3D devices to Xrefs * Procuring long lead light fixtures and power distribution equipment such as switchgear, switchboards, panelboards, transformers, MCC's, generators, variable speed drives, and UPS's. * Transformer configurations * Perform short circuit calculations identifying deficiencies or series ratings * Estimate weights of main tray/trapezes and equipment needing support * Assist in managing electrical bid process for clients, observing construction, and assisting with startup. * Project planning and feasibility studies. * Actively participating in and supporting department-wide standard development, updates, and maintenance. * Researching electrical building/power materials and best practices * Supporting talent growth within our organization Required Education Skills and Experience * Bachelor of Science in Electrical Engineering or related field * 4+ years of work experience in electrical systems for building power. * 4+ years of work experience in designing lighting, fire alarm systems, and low voltage systems for building spaces, including lighting calculations, and coordinating fixture placement with trades. * 4+ years of work experience in electrical bid documents and procuring electrical materials and equipment. * 4+ years of work experience in AutoCAD, Revit or other related design programs. * Relevant work experience in a manufacturing or construction setting preferred. * PE tracked desirable. * Travel to customer project sites for fieldwork, review, audit, and meetings, estimated 25%. Physical Requirements * Prolonged periods sitting at a desk and working on a computer. * Must be able to lift-up to 15 pounds at times. Travel Requirement * Up to 25% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics. JOB CODE: 1002648

In this role, you will plan, develop, and review electrical engineering design work, produce drawings and documentation, and prepare design estimates for a project. You will coordinate with clients, facilitate technical discussions, and review key electrical drawings, calculations, and bid summaries. You will solve complex technical issues and ensure electrical designs comply with all regulations and standards. This position is for a SmartPlant 3D Designer who will prepare electrical 3D designs as well as 2D electrical AutoCAD and SmartSketch designs to support new facility infrastructure design for DOD and USAF projects. The successful candidate must have strong organizational and teamwork skills, proven problem-solving abilities, can-do attitude, and the desire to innovate designs. Major Responsibilities: Plans, develops, coordinates, and reviews design work within a medium-size electrical design work group on projects of medium size or assignments in support of global business unit. Produces drawings and documentation in accordance with established design and scope including design of earthwork, drainage, road design, foundation, and steel detailing. Ensures electrical systems designs comply with all applicable installation codes, regulations, and standards. Coordinates and interfaces as directed with the day-to-day technical work of electrical engineers, scientists, specialists, designers, and drafters. Communicates complex technical issues and recommends solutions to upper management. Facilitates technical discussions with third parties (client, suppliers, regulators). Prepares or oversees the preparation of electrical design estimates and work plan in accordance with project scope, schedule and budget, and manages implementation and performance accordingly. Develops Engineering Department Procedures (EDPs), and administrative practices. Coordinates with client representatives as delegated to obtain approval on phases of work. Reviews and approves key electrical engineering drawings and calculations and bid summaries. Mentors electrical designers and drafters by providing appropriate on-the-job training for their professional development. This role will support design development of electrical systems and equipment for the project by preparing models, drawings, and evaluations, in accordance with applicable procedures, codes, standards, and contract requirements. The candidate will work with electrical engineers, junior designers, and other technical disciplines in a team environment with Job Responsibilities (include but not limited to): Supporting, coaching, and training less experienced designers. Modeling of electrical rooms, equipment, cable tray, conduit, conduit duct bank, lighting, receptacles, etc. In a Smartplant 3D model environment. Creating bill of materials and drawing installation details for the modelled items listed above in addition to grounding, lightning protection, support details, and other details using SmartSketch and AutoCAD. Performing calculations utilizing AGI 32 for lighting layouts and ETAP for ground grid layouts. Assist with coordination of 3D model activities, i.E. Input, interference reconciliation, etc. With other physical related disciplines. Responsible for physical design implementation by producing drawings of interior and exterior layouts/plans/elevation views of the raceway design (conduit/cable tray/duct bank), equipment location and layout, lighting layouts, lightning protection layouts, and grounding plans. Develop material specifications utilizing the software SpecsIntact. Coordinate with systems engineering department to establish and verify design/project requirements. Capable of independent creative design, with direction, using industry-proven concepts, and procedures. Ensures electrical systems designs comply with all applicable installation codes, regulations, and standards. Education and Experience Requirements: Level 1 Requires an AA/AS or Certificate in Engineering/CAD with 10-12 years of experience or 12-14 years of relevant work experience. Must be a United States citizen. Must be able to complete and pass a pre-employment drug screen and background check. Level 2 Requires an AA/AS or Certificate in Engineering/CAD with 13-15 years of experience or 14-17 years of relevant work experience. Must be a United States citizen. Must be able to complete and pass a pre-employment drug screen and background check. Required Knowledge and Skills: Knowledge & application of NEC code and NEMA/ANSI/IEEE Standards. Must have experience with an electronic Cable Management System, such as the SETROUTE program, and be able to input and complete corrections to the database. Must be able to collaborate well with other disciplines. Ability to cope with conflicting deadlines, frequent interruptions, and multiple tasks. Relevant experience includes, but is not limited to, drawings for electrical systems and equipment on nuclear or industrial process facilities, data centers, central utility plants, or complex building electrical systems. Hands-on and advanced experience using Smartplant 3D, SmartSketch, and AutoCAD. Excellent communication skills (both verbal and written). Ability to utilize engineering and office automation tools effectively. Broad knowledge of the application of electrical engineering design principles. Strong knowledge of electrical systems, schematics, and layouts. Knowledge of and standards. Thorough knowledge of engineering deliverables, such as drawings and specifications. Ability to express technical issues in a clear and concise manner, both written and verbally. Ability to resolve design issues independently and collaboratively with other engineering disciplines, construction, and the client. Modeling of piping, HVAC, and Mechanical equipment in a Smartplant 3D model environment. Previous DoD/DoE, USACE, NAVFAC, USAF, or NASA project experience. Experience working with procedures meeting quality assurance programs such as ISO-9000 $75-$87+ PerDiem

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As an Electrical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Electrical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Electrical Engineering co-ops and interns enter into the following positions: Electrical & Instrumentation (E&I) Project Engineers work on a variety of real-world electrical and instrumentation projects in a refinery setting. During your time at MPC, you will develop and utilize project management skills including scope alignment, cost and schedule development, and teamwork through multiple engineering phases. You will also support the area teams. We are committed to developing engineers into professional project managers who successfully manage projects of all sizes. Reliability Electrical & Instrumentation (E&I) Engineers troubleshoot Electrical & Instrumentation issues at the refinery. As a reliability intern, you will help analyze failures of equipment, develop solutions for recurring equipment difficulties, submit Project Request Forms (PRF's) to implement solutions, and understand equipment maintenance strategies. There will be opportunities to use electrical analysis software to solve coordination issues and run Arc Flash studies for the power system, as well as learning and understanding about how our critical Refinery Safety Instrumented Systems (SIS) are applied. Process Control / Technical Service Engineers can work on a wide array of projects in support of the process control systems installed throughout the refinery and products movements areas. The process control systems in the refinery provide real-time control and data acquisition functions in support of operating the refinery process and electrical equipment. Typical college co-op assignments include the following: troubleshooting system power supply problems, control system programming, hardware and software lifecycle replacement projects, installing and troubleshooting communication networks and monitoring control system performance metrics. Qualifications: + Candidates must be majoring in Electrical Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.92 per hour / MAX - $41.67 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00020139 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez, California, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Part time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.