Electrical engineer internship jobs in Tuscaloosa, AL - 73 jobs

PURPOSE The primary responsibilities of the Electrical Engineer II involves the design, development, modification, and implementation of Electrical/Electronic subsystems for a high-speed document scanner. This engineer must have knowledge of digital electronics and electrical hardware systems. This individual is required to work closely with an experienced team of electrical engineers, mechanical engineers, firmware engineers, and manufacturing engineers, as well as with product management to assure that project goals are being met across interdepartmental boundaries. JOB DESCRIPTION ROLE AND RESPONSIBILITIES Understand the required functionality of electronics and electrical subsystems within the scanner and being capable of working within a design team to implement new functionality and features. New design and maintenance of existing designs of the microprocessor systems within the scanner. New design and maintenance of existing designs of power subsystems within the scanner. Able to investigate failures within the electrical and electronic subsystems of the scanner, determine the root cause of the failure, and create a plan for corrective action. Participate in the general support and maintenance of the electrical and electronic subsystems of the scanner. Develop schematics, wiring diagrams, and cable harness designs, including connector selection, shielding, grounding, and EMI/EMC considerations. Proficiency with schematic capture and PCB/cable design tools such as OrCAD or equivalent. Able to work closely with a Certification Agency to obtain and maintain product certification of the scanner. Document all electronic and electronic subsystem's operational specifications, changes, tolerances, and theory of operations. Work closely with the cross functional teams (Mechanical, Firmware, Manufacturing, Customer Service, Current Product Engineering, Documentation, and Product Management) to integrate and orchestrate all features/specifications that impact electrical and electronic subsystems of the product. Design, analyze, and validate DC power distribution and low-voltage control systems for electromechanical assemblies. Ability to model systems to determine supply requirements under various operating conditions. Select, size, and integrate stepper motors, solenoids, encoders, sensors, and motor drivers into new and existing platforms. Support transition to manufacturing, including DFM, test fixtures, and production release. Demonstrated ability to debug hardware using oscilloscopes, logic analyzers, and other bench tools. Strong documentation, communication, and cross-functional collaboration skills. PREFERRED SKILLS, QUALIFICATIONS AND EDUCATION REQUIREMENTS Bachelor of Science or Master of Science degree in Electrical Engineering or equivalent with hands-on electronic project experience 7-10 years of job-related experience a plus Knowledge of digital system design including tools, timing analysis, simulation, programming languages. Knowledge of electrical power systems and power components. Experience with EMI/EMC mitigation, filtering, and grounding strategies. Knowledge of safety and regulatory standards (UL, CE, IEC, etc.). Knowledge of microprocessor systems and related C-language and Assembly language programming. Familiarity with embedded control systems, microcontrollers, and motion control algorithms. FPGA programming experience with VHDL or related languages is a plus. Ability to work effectively alone and within a multi-disciplined cross functional team ADDITIONAL NOTES

This position supports the Grid Visualization and Analytics Center (SGVAC) within the Research & Development department. The SGVAC is an innovation center dedicated to the research, pre-operational development, assessment, and demonstration of situational awareness technologies for Transmission and Distribution. Areas of focus include synchrophasor technology, next-generation control center functionalities, cyber security testing, new visualization approaches, DERMS platform evaluation, data analytics, as well as modeling and simulation including via a Real Time Digital Simulator (RTDS) with hardware-in-the-loop testing capability. Responsibilities * Support the Grid Operations and Planning Research area within the Research & Development department. * Assist in projects and eventually lead efforts to deploy and evaluate the performance of emerging technologies. * Focus on tools to support grid operations with an emphasis on power system analysis, modeling, simulation, big data analytics, and visualization. * Engage in projects involving Distribution Management Systems (DMS) and Distributed Energy Resource Management Systems (DERMS). * Develop research plans to evaluate new technology. * Manage multiple tasks simultaneously. * Document study assumptions and methods used to arrive at results. * Provide informative reports and presentations on projects. Essential Skills * Design and engineering expertise, particularly in electrical and systems engineering. * Strong understanding of power system modeling and simulation. * Proficiency in big data analytics and cyber security. * Experience in database management and project management. Additional Skills & Qualifications * Master of Science in Electrical Engineering (EE) is required. * Specialization in Power Systems is desired. * Training in or experience with computer programming (Python, C#, SQL) is desired. * Experience in data science is beneficial. Work Environment The work environment supports the Schatz Grid Visualization and Analytics Center (SGVAC) within the Research & Development department, an innovation center focusing on situational awareness technologies for Transmission and Distribution. The position involves cutting-edge research and development, including synchro phasor technology, advanced control center functionalities, and cyber security testing. The role includes new visualization approaches, DERMS platform evaluation, data analytics, and modeling and simulation utilizing a Real Time Digital Simulator (RTDS) with hardware-in-the-loop testing capabilities Job Type & Location This is a Contract position based out of Birmingham, AL. Pay and Benefits The pay range for this position is $35.00 - $55.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a hybrid position in Birmingham,AL. Application Deadline This position is anticipated to close on Jan 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

About Us At our company, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At our company, stability, innovation, and growth are more than just values-they are the pillars of our continued success. Exciting News About Our Future! Our company is currently undergoing an exciting brand transformation, including a change in our name. As part of this process, you may see references to both our current name, Bernhard, and our future name, Enfra, during your application process. This change reflects our commitment to growth, innovation, and providing even greater value to our employees, customers, and community. We appreciate your understanding during this transition and look forward to sharing this new chapter with you. If you have any questions, feel free to ask during the interview process! Overview Position: Electrical Engineer, PE I Responsibilities: Overseeing the creation of technical design solutions and/or studies. Providing technical authority and direction as the Engineer of Record (EOR) for the development of electrical engineering designs, studies, and solutions. Being part of an integrated project team. Requirements: Professional Engineer (PE) license. Experience in overseeing technical design solutions and/or studies. Ability to provide technical authority and direction as the Engineer of Record (EOR). Proficiency in electrical engineering designs and solutions. Ability to work effectively as part of an integrated project team. Position Type: Full-Time, Exempt Reporting: Reports to [Insert Supervisor/Manager Title] Responsibilities Specific responsibilities include: Analyzes, develops, and evaluates systems. Improves and maintains current systems or creates brand new projects. Designs and drafts blueprints, visits systems in the field, and manages projects. Applies engineering techniques and analyses within the scope of the assignment. Performs work under minimal supervision. Handles complex issues and problems and refers only the most complex issues to higher-level staff. Provides leadership, coaching, and/or mentoring to a subordinate group. May act as a lead or first-level supervisor. This position is Full-Time, Exempt, and reports to the Engineering Director. Qualifications Required Education, Experience and Qualifications Bachelor's degree in Engineering and Professional Engineer (PE) License 4-6 years of experience Strong proficiency in REVIT Strong technical skills; familiarity with the National Electrical Code (NEC) Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint) Excellent verbal and written communications skills Possesses comprehensive knowledge of the subject matter Critical thinking skills Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment Excellent multitasking skills, with the ability to perform duties outside of the scope of work when necessary Preferred Education, Experience and Qualifications Preferred experience with the design of healthcare projects. Preferred experience with the design of Higher Education projects. Preferred experience with the design of Central Energy Plant (CEP) electrical infrastructure projects. Preferred experience in the design of medium voltage protection and power distribution systems. Preferred experience in the design of paralleled generator systems at medium voltage and below. Travel Requirements 5-10% of time will be spent traveling to job site(s)/office location. Physical/Work Environment Requirements Prolonged periods of sitting at a desk and working on a computer. Climbing stairs. Remaining in a stationary position, often kneeling, standing or sitting for prolonged periods. Repeating motions that may include the wrists, hands and/or fingers. Quiet environment. Light work that includes adjusting and/or moving objects up to 20 pounds. Pay Range USD $92,857.50 - USD $119,489.00 /Yr. The company is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the E-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

About Us QISG leverages Quanta's comprehensive resources to deliver collaborative solutions for our partners' energy infrastructure needs. We use in-house talent, expertise and resources to plan, design, engineer, manage, conduct maintenance on and construct projects. Our turnkey service capabilities provide our customers with efficiency, consistency, attention to detail and safe execution. The QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environmental Planning, Permitting, Title and Land Management expertise that ensure outstanding results for our clients. About this Role Location: 3500 Colonnade Pkwy Suite 550, Birmingham, AL 35243 We are seeking a skilled Electrical Designer to join our fast-paced EPC team in the power sector, working on gas turbines, renewables, BESS, substations, and transmission systems. You will create precise electrical designs and construction packages that drive project success, ensuring quality, accuracy, and seamless coordination across disciplines. What You'll Do Produce electrical installation details, MCC single lines, motor elementary diagrams, electric room layouts, cable schedules, power, lighting, and grounding plans. Perform calculations for lighting levels, voltage drop, conduit/tray fill, wire/conduit sizing, and overcurrent protection. Determine motor control center and substation loading. Develop accurate installation documents from vendor drawings. Collaborate with other disciplines to ensure integrated designs. Support field verification and provide on-site assistance during construction and startup. Contribute to cost estimation, material take-offs, and project scheduling. What You'll Bring Associate degree in Engineering Technology or Computer-Aided Drafting. Minimum 7 years of electrical design experience, preferably in EPC and power sectors. Strong knowledge of the National Electrical Code (NEC) and electrical materials/construction practices. Proficiency in AutoCAD (2D required, 3D desirable), Revit, Navisworks, and Microsoft Office Suite. Excellent communication skills and ability to work independently or as part of virtual teams. What You'll Get Join QISG and grow your career! Competitive base salary + annual bonus potential Generous PTO & paid holidays to maintain work-life balance 401(k) with a generous match to plan for your future Comprehensive benefits - medical, dental, vision, and life insurance Weekly pay for consistent, reliable compensation Great mentoring & career growth opportunities - we invest in your development At QISG, we don't just offer a job-we offer a career where you can grow, learn, and be rewarded for your contributions. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

If you are a future engineer wanting design experience and a positive culture that promotes personal growth, then we understand what you're looking for. CLP Systems doesn't just want interns as entry-level professionals, we want to empower future leaders to help us think better and smarter through our design efforts and improvements. CLP Systems is looking for a highly qualified intern to join our team. Our design team supports our customers and project managers to simplify tie down hardware and create great customer experiences in a rapidly growing industry. CLP Systems seeks an intern who can bring consistent quality and lead in various aspects of system design and quality control. The intern should be prepared to work in a team environment and possess high leadership abilities. The intern will finish the internship having gained a strong understanding of the importance and function of shearwall and uplift hardware, as well as broad experience in various aspects of AutoCAD detailing, shearwall and uplift hold down design, RFI and submittal review processes, submittal quality control, national structural and architectural standards, and valuable leadership skills . Responsibilities Check incoming files (Structural and Architectural PDFs and CADs, etc.) to ensure they are usable and contain parts and components required by CLP Systems. Create or update records with new files and information. Utilize AutoCAD to produce shop drawing submittals For Approval and For Construction Detail concrete and framing cut sections, rod system wall sections, and symbol layouts Utilize Revu Bluebeam to identify loads, design requirements, and details in structural and architectural packages pertaining to the design of our system Design and review tie down system components using in-house Excel VBA design program Apply engineering concepts to improve system design and identify opportunities for cost savings Qualifications Requirements CLP Systems is looking for an undergraduate student in the Birmingham, AL area who is majoring in engineering or associated field of study. The person should have excellent verbal and written communication skills, be proficient in AutoCAD and Microsoft Excel, work effectively in a team environment, produce consistent quality, and have a proactive mindset with engineering knowledge and design experience. Candidates who possess strong leadership capabilities will be highly considered. Majors Construction and Building Science, Structural Engineering Steel Dynamics, Inc., and all affiliated entities are equal opportunity employers. Coming Soon!!

Job Title: Electrical Engineer - Tyndall AFB ***Work Location: Panama City, FL*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities Provides professional electrical engineering and construction management support by performing tasks such as: serves as the organizational subject matter expert on standards and practices for electrical engineering designs, system components, installations, and system construction, including primary power generation and distribution infrastructure, commercial and industrial electrical systems, and residential electrical systems. Participates in design reviews of and provides comments on contractor submittals on electrical designs and plans. Provides quality assurance oversight, documentation of such oversight, and recommends corrective actions Performs on-site inspections of contractor's work. Provides safety oversight, documentation of such oversight, and directs corrective actions Assists in interpreting and enforcing contractual provisions regarding contractor electrical requirements and deliverables Documents and provides reports regarding contractor progress toward accomplishing contractual scopes of work and recommends authorization of progress payments Education/Experience: Current Professional Engineer license Bachelor's Degree in Engineering Minimum of 10 years' experience as electrical engineer on large complex multimillion dollar federal construction projects, Department of Defense preferred. Experience with Resident Management System (RMS), preferred Experience with Microsoft Office Experience working at federal facilities including buildings, airfield facilities, and electrical power stations. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

**Note:** Candidate will work in a hybrid work arrangement reporting in-person/in-office at least 3 days per week (12 days a month). requires 0-10 years of related experience. **Description of Work Environment:** + This position supports the client Research & Development department. + The client is an innovation center that facilitates the research, pre-operational development, assessment and demonstration of situational awareness technologies for Transmission and Distribution. + Areas of focus include synchrophasor technology, next generation control center functionalities, cyber security testing, new visualization approaches, DERMS platform evaluation, data analytics as well as modeling and simulation including via a Real Time Digital Simulator (RTDS) with hardware-in-the-loop testing capability. **Summary of Position Duties:** + This position supports the Grid Operations and Planning Research area within clients Research & Development department. + The engineer will support projects and in time lead efforts to deploy and evaluate the performance of emerging technologies in this arena. + The position is primarily focused on tools to support grid operations with an emphasis on power system analysis, power system modeling and simulation including digital twins, "big data" analytics, and visualization. + However, the work may involve projects in other areas of the power system. Knowledge of databases, data structures, computer networking is desirable as well as an aptitude to apply engineering analysis to solve problems. **Education Requirements:** + Master of Science in Electrical Engineering (EE) required + Proficiency in power system modeling and simulation (RTDS, PSCAD, or PSS/E) required. + Specialization in Power Systems desired + Training in/experience with computer programming (Python, C#, SQL) desired + Training in/experience with data science desired **Job Responsibilities:** + Develop research plan to evaluate new technology + Manage multiple tasks at one time + Provide documentation of study assumptions and methods used to arrive at results + Provide informative reports and presentations on projects + Some overnight travel may be required but this is not extensive. **Knowledge, Skills & Abilities** + Must demonstrate good communication skills, both internal and external to the company + Must have excellent organizational skills + Must possess analytical skills as well as the ability to manage multiple projects simultaneously + Must work well in a team environment + Must have the ability to manage your own work schedule and work with limited direction + Must have strong initiative - a self-starter + Must be great at problem solving. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Senior Electrical Design Engineer Seeking Senior Electrical Design Engineer to work with an Engineering firm (EPC) Specializing in engineering and design of electrical and instrumentation systems for various capital projects in chemical or pulp and paper industries. You will work in engineering office responsible for engineering and design functions. Requirements: Bachelor of Science in Electrical Engineering from an ABET accredited program Ability to obtain PE registration is required At least 10 years of relevant experience in electrical engineering (design engineer) working in Engineering office. Knowledgeable in the application of the National Electrical code, engineering for electrical distribution systems, electrical equipment specifications, electrical requirements for hazardous area classifications, grounding and lighting design Extensive experience in working with other engineering disciplines to ensure project scope details are capture Experience working with general arrangements, P&IDs, and process equipment lists to capture electrical engineering project scope Experience developing, finalizing and checking electrical engineering documentation including, but not limited to, load lists, singe line diagrams, motor elementaries, electrical room layouts, grounding plans & details, lighting plans, power plans with raceway routes, cable lists and electrical equipment specifications Experience working with project schedules to incorporate electrical design activities and their associated logic ties with other disciplines' design activities Extensive experience working with process equipment vendors to review documentation and identify electrical scope and design requirements Ability to travel to client sites to gather engineering field information and work with electrical client counterparts Working knowledge of CAD software (AutoCAD and Revit) Experience leading electrical project teams including engineers and designers

Job DescriptionDescription: DeSHAZO is a leader in the design and manufacturing of Overhead Bridge Cranes. All cranes are custom built for reliability and long service life. Highly engineered structures are fabricated and welded to high national standards along with our fully equipped machining facility that provides quality parts held to close tolerances. Parts are integrated from raw materials to finished structures, DeSHAZO is known as a force in the Overhead Crane Industry. JOB SUMMARY: The Electrical Engineer coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES:The essential functions include, but are not limited to the following: Develop detailed layout drawings and specifications for electrical equipment using computer-assisted drafting (AutoCAD) software. Electrical control drawings for shop fabrication and automation. Coordinate with and consult other workers to design, lay out, or detail components and systems and to resolve design or other problems. Review and analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting electrical designs. Modify and revise designs to correct errors or to reduce production problems. Collaborate with engineers and technicians to review schematics and answer questions pertaining to design. Good communication skills, work well with a team. Knowledge of Microsoft Office MINIMUM QUALIFICATIONS (KNOWLEDGE, SKILLS, AND ABILITIES) Bachelor's degree in Electrical Engineering from an accredited engineering program. At least 2-5 years of experience in the field of electrical schematic layout & design. Familiarity with relay logic, VFD's and automation is a plus. Must have 2 years of AutoCAD experience with electrical circuit design. Ability to detail shop production drawings in AutoCAD Familiarity with Electrical codes and practices. Must be comfortable working in a fabrication/ Industrial setting. Ability to work and effectively communicate with Engineer and shop associates. Overhead crane design experience or controls experience (recommended) BENEFITS AVAILABLE: Medical (Eligible 1st of the month following hire date.) Dental & Vision Critical Illness Coverage Accident Insurance (off the job accidents) Company-paid Basic Life/AD&D Company-paid Short-Short Voluntary Long-Term Disability Insurance Pre-tax Flexible Spending Accounts (FSA, DCA) 401(k) - Match is discretionary 50% matching up to 6% Employee Assistance Program 9 Paid Holidays per year PTO Program Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled/Other Protected Category Deshazo's Mission: Deshazo is committed to elevating our clients' business needs through custom-built cranes and tailor-made automation systems. We enhance our products by providing expert inspections, repairs, modernizations or rebuilds. Requirements:

HI, Hope you're doing well This is Pankaj from 4P Consulting please see below Job Title: Electrical Engineer 2 Company: 4P Consulting Inc. Job Type: Full-Time, Hybrid (In-office at least 3 days/week) Job Description: 4P Consulting Inc. is seeking an experienced Electrical Engineer 2 to join our team in Birmingham, AL. This position will provide support to the Schatz Grid Visualization and Analytics Center (SGVAC) within Southern Company's Research & Development department. The SGVAC is an innovative research hub that focuses on situational awareness technologies for Transmission and Distribution, with applications in synchrophasor technology, control center functions, cyber security, visualization, and simulation platforms. The ideal candidate will have 3-6 years of relevant experience, a bachelor's degree in electrical engineering (accredited), and a passion for advancing grid operations technologies. The role primarily focuses on power system modeling, simulation, and data analytics, with a focus on big data, visualization, and emerging technologies in grid operations. Responsibilities: Research and Evaluation: Develop and implement research plans to evaluate new technologies related to power systems, grid operations, and data analytics. Project Management: Lead and contribute to projects focused on power system analysis, simulation, modeling, and big data analytics. Reporting & Documentation: Provide documentation detailing study assumptions, methods, and results, and present findings in clear, informative reports and presentations. Collaboration: Work closely with cross-functional teams to deploy and assess emerging technologies. This includes integrating systems such as Distributed Energy Resource Management Systems (DERMS) and Distribution Management Systems (DMS). Performance Evaluation: Evaluate the performance of new technologies and tools supporting grid operations, including the use of Real-Time Digital Simulators (RTDS) with hardware-in-the-loop testing capabilities. Travel: Occasional overnight travel may be required, although not extensive. Knowledge, Skills & Abilities: Technical Skills: Strong understanding of power system analysis, modeling, and simulation techniques, including expertise in data analytics and visualization tools. Programming & Data Science: Experience with computer programming languages such as Python, C#, or SQL, and familiarity with data science methodologies. Problem Solving: Strong problem-solving abilities, particularly in the application of engineering analysis to address complex challenges. Communication Skills: Excellent communication skills for internal and external collaboration, with the ability to present technical findings clearly and concisely. Organizational Skills: Ability to manage multiple projects simultaneously, with a keen attention to detail and the ability to manage work independently. Teamwork & Initiative: Ability to work well in a collaborative team environment while also being a self-starter with a strong sense of initiative. Education & Experience: Required: Bachelor's degree in Electrical Engineering from an accredited institution (3-6 years of related experience). Preferred: Master of Science in Electrical Engineering (EE) with a specialization in Power Systems. Desired: Experience with computer programming (Python, C#, SQL), and data science. Desirable: Knowledge of databases, data structures, and computer networking. Work Location/Arrangement: Primary Location: Alabama Power Company (APC) Headquarters Building, 600 North 18th Street, Birmingham, AL, 35203. Work Arrangement: Hybrid work arrangement, with the expectation of in-office presence at least 3 days a week (12 days a month). Why 4P Consulting Inc.? Work in a cutting-edge research environment alongside industry experts. Opportunity to influence the development and deployment of new grid technologies. Hybrid work schedule for a balanced professional and personal life. Thanks and Regards Sr. Talent Acquisition Specialist Pankaj Mishra ********************************* ***************

We are a large growing MEP Design Engineering company in Alabama that works on many of Alabama's biggest and best commercial electrical engineering and design projects. This is a full-time position with great salary and benefits package as well as career-growth opportunities. We are planning to hire Alabama's best and brightest Electrical Design-Engineer's in the near future. Responsibilities: Perform Electrical State Calculations Design and prepare drawings electrical, lighting, and wiring systems. Attend events, job sites, and meet closely with: Owners, clients, architects, and other disciplines. Research and review best Electrical Design layouts and codes with licensed professional Electrical Engineer. Requirements: Bachelors in Electrical Engineering 3+ years of experience as an Electrical Designer and Design. Strong knowledge in: State Electrical Building Codes, AutoCAD, Microsoft Office, and Revit.

KBH Industrial | Birmingham, Alabama | Full-Time About Us KBH Solutions (also known as KBH Industrial) is your most reliable source for project management, project controls and project oversight with associated support services. KBH can and will support all phases of your project. Job Summary We are seeking an Electrical/I&C Design Engineer to join the Fleet Central Design Organization. This team is responsible for producing capital project designs and providing technical oversight of engineering work performed in-house, by Architect Engineers (AEs), or other outside resources. The ideal candidate will have experience in electrical or digital/I&C engineering, design modifications, and supporting large capital projects in a nuclear power plant environment. This role is based in Birmingham, AL with up to 25% travel to other fleet sites across GA and AL. Key Responsibilities Develop engineering analyses to support electrical and I&C design solutions. Prepare equipment and system specifications, perform bid evaluations, and review vendor submittals. Create design change packages to support fleet-wide and site-specific capital projects. Support design implementation and provide troubleshooting for emergent equipment issues. Provide oversight of power system analysis products and ensure proper application at sites. Manage and control I&C plant design software and related products. Monitor new technology for application into fleet strategic planning. Promote standard approaches and innovation in electrical/I&C design across the fleet. Participate in industry initiatives to support and maintain design/analysis methodologies. Required Education and Experience Bachelor of Science degree in Engineering from an ABET-accredited college or university (required). Minimum of 3 years of electrical or digital/I&C engineering experience (preferred). Experience with design modifications in commercial nuclear power (preferred). Professional Engineer (PE) license preferred but not required. Qualifications and Skills Understanding of power flow concepts, distribution system impacts, motor-starting, short-circuit, and dynamic response analysis (ETAP experience preferred). Knowledge of network infrastructure, operating systems, databases, and industrial control system networks (ICS, PLC, DPC, SCADA). Ability to lead small teams and initiatives effectively. Strong analytical and problem-solving skills with attention to detail. Positive, solution-oriented team player with adaptability to changing priorities.

About Us QISG leverages Quanta's comprehensive resources to deliver collaborative solutions for our partners' energy infrastructure needs. We use in-house talent, expertise and resources to plan, design, engineer, manage, conduct maintenance on and construct projects. Our turnkey service capabilities provide our customers with efficiency, consistency, attention to detail and safe execution. The QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environmental Planning, Permitting, Title and Land Management expertise that ensure outstanding results for our clients. About this Role Location: 3500 Colonnade Pkwy Suite 550, Birmingham, AL 35243 Position: Electrical Engineer - EPC Projects We are seeking an experienced Electrical Engineer with experience in 13.8 kV and 34.5 kV systems and a Professional Engineer (PE) license desired to join our EPC team supporting power generation, renewables, battery energy storage (BESS), data centers, substations, and transmission projects. What You'll Do Develop conceptual layouts, preliminary designs, and cost studies for electrical systems. Perform voltage drop, load flow, fault current, arc flash, conduit/tray fill, and protective device coordination calculations. Size substations, motor control centers (MCCs), and other electrical equipment. Review vendor drawings and support interdisciplinary design integration. Support procurement documentation, construction packages, and field verification/commissioning. Mentor junior engineers and provide technical guidance. Work on projects involving turbine generation, including wind, gas, steam, and other types of turbines, covering design, integration, and operational considerations. What You'll Bring Bachelor's or Master's in Electrical Engineering. PE license desired. Minimum 7 years of industrial or EPC electrical engineering experience. Strong knowledge of NEC and applicable industry standards. Proficiency in AutoCAD (2D required, 3D desirable), Revit, Navisworks, and Microsoft Office. Experience with ETAP, SKM, or EasyPower is a plus. Excellent communication skills; able to work independently and with virtual teams. Experience with 13.8 kV and 34.5 kV electrical systems. What You'll Get Join QISG and grow your career! Competitive base salary + annual bonus potential Generous PTO & paid holidays to maintain work-life balance 401(k) with a generous match to plan for your future Comprehensive benefits - medical, dental, vision, and life insurance Weekly pay for consistent, reliable compensation Great mentoring & career growth opportunities - we invest in your development At QISG, we don't just offer a job-we offer a career where you can grow, learn, and be rewarded for your contributions. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

+ This position supports the Schatz Grid Visualization and Analytics Center (SGVAC) within Client Research & Development department. + The SGVAC is an innovation center that facilitates the research, pre-operational development and assessment and demonstration of situational awareness technologies for Transmission and Distribution. + Areas of focus include synchro phasor technology, next generation control center functionalities, cyber security testing, new visualization approaches, DERMS platform evaluation, data analytics as well as modelling and simulation including via a Real Time Digital Simulator (RTDS) with hardware-in-the-loop testing capability. **Summary of Position Duties:** + This position provides support to the Grid Operations and Planning Research area within Client Research & Development. The engineer will support projects and in time lead efforts to deploy and evaluate the performance of emerging technologies in this arena. + The position is primarily focused on tools to support grid operations with an emphasis on power system analysis, power system modelling and simulation, "big data" analytics, and visualization. + However, the work may involve projects in other areas of the power system, including integrating Distribution Management Systems (DMS) and Distributed Energy Resource Management Systems (DERMS) + Knowledge of databases, data structures, computer networking is desirable as well as an aptitude to apply engineering analysis to solve problems. **Education Requirements:** + Master of Science in Electrical Engineering (EE) required + Specialization in Power Systems desired + Training in/experience with computer programming (Python, C#, SQL) desired + Training in/experience with data science desired **Job Responsibilities:** + Develop research plan to evaluate new technology + Manage multiple tasks at one time Provide documentation of study assumptions and methods used to arrive at results + Provide informative reports and presentations on projects + Some overnight travel may be required but this is not extensive. **Knowledge, Skills & Abilities:** + Must demonstrate good communication skills, both internal and external to the company + Must have excellent organizational skills + Must possess analytical skills as well as the ability to manage multiple projects simultaneously + Must work well in a team environment. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

DeSHAZO is a leader in the design and manufacturing of Overhead Bridge Cranes. All cranes are custom built for reliability and long service life. Highly engineered structures are fabricated and welded to high national standards along with our fully equipped machining facility that provides quality parts held to close tolerances. Parts are integrated from raw materials to finished structures, DeSHAZO is known as a force in the Overhead Crane Industry. JOB SUMMARY: The Electrical Engineer coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES:The essential functions include, but are not limited to the following: Develop detailed layout drawings and specifications for electrical equipment using computer-assisted drafting (AutoCAD) software. Electrical control drawings for shop fabrication and automation. Coordinate with and consult other workers to design, lay out, or detail components and systems and to resolve design or other problems. Review and analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting electrical designs. Modify and revise designs to correct errors or to reduce production problems. Collaborate with engineers and technicians to review schematics and answer questions pertaining to design. Good communication skills, work well with a team. Knowledge of Microsoft Office MINIMUM QUALIFICATIONS (KNOWLEDGE, SKILLS, AND ABILITIES) Bachelor's degree in Electrical Engineering from an accredited engineering program. At least 2-5 years of experience in the field of electrical schematic layout & design. Familiarity with relay logic, VFD's and automation is a plus. Must have 2 years of AutoCAD experience with electrical circuit design. Ability to detail shop production drawings in AutoCAD Familiarity with Electrical codes and practices. Must be comfortable working in a fabrication/ Industrial setting. Ability to work and effectively communicate with Engineer and shop associates. Overhead crane design experience or controls experience (recommended) BENEFITS AVAILABLE: Medical (Eligible 1st of the month following hire date.) Dental & Vision Critical Illness Coverage Accident Insurance (off the job accidents) Company-paid Basic Life/AD&D Company-paid Short-Short Voluntary Long-Term Disability Insurance Pre-tax Flexible Spending Accounts (FSA, DCA) 401(k) - Match is discretionary 50% matching up to 6% Employee Assistance Program 9 Paid Holidays per year PTO Program Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled/Other Protected Category Deshazo's Mission: Deshazo is committed to elevating our clients' business needs through custom-built cranes and tailor-made automation systems. We enhance our products by providing expert inspections, repairs, modernizations or rebuilds. Salary Description $64,000 - $80,000/yr

Electrical Engineer 3 - Grid Visualization & Analytics Location- Birmingham, AL Hybrid Schedule (In-office minimum 3 days/week - 12 days/month) Experience Level 6-10 years of related experience Client- Alabama Power Contract- 3 Years Position Overview The Electrical Engineer 3 will support the Schatz Grid Visualization and Analytics Center (SGVAC) within Southern Company's Research & Development organization. This role focuses on advancing grid operations, planning, and situational awareness technologies for Transmission and Distribution systems. The engineer will support-and over time lead-projects evaluating emerging grid technologies, with a strong emphasis on power system modeling, simulation, analytics, and visualization. This role is ideal for a technically strong engineer with research aptitude and hands-on power systems experience. Key Areas of Focus Power system modeling and simulation (including digital twins) Grid operations and planning research Synchrophasor technologies Data analytics and visualization Cybersecurity testing for grid applications DERMS platform evaluation Real-Time Digital Simulator (RTDS) with hardware-in-the-loop testing Next-generation control center technologies Key Responsibilities Support and contribute to research projects focused on grid operations and planning Develop research plans to evaluate new and emerging grid technologies Perform power system analysis, modeling, and simulation studies Apply data analytics and visualization techniques to power system problems Document assumptions, methodologies, and results clearly and accurately Prepare technical reports and presentations for internal and external audiences Manage multiple tasks and projects simultaneously Collaborate effectively within multidisciplinary research teams Travel overnight occasionally (limited) Education Requirements Master of Science in Electrical Engineering (Required) Specialization in Power Systems (Preferred) Technical Skills & Qualifications Proficiency in power system modeling and simulation tools such as: RTDS PSCAD PSS E Experience or training in computer programming (Python, C#, SQL preferred) Experience or training in data science and analytics preferred Knowledge of databases, data structures, and computer networking is a plus Strong analytical and problem-solving abilities

Role: Electrical Engineer 1 Duration: 12+ months on W2 Pay Range: $40-43/hr •Candidate will work in a hybrid work arrangement reporting in person/in-office at least 3 days per week (12 days a month). Job Description... requires 0-3 years of related experience Description of Work Environment: This position supports the Schatz Grid Visualization and Analytics Center (SGVAC) within **** Research & Development department. The SGVAC is an innovation center that facilitates the research, pre-operational development, assessment and demonstration of situational awareness technologies for Transmission and Distribution. Areas of focus include synchrophasor technology, next generation control center functionalities, cyber security testing, new visualization approaches, DERMS platform evaluation, data analytics as well as modeling and simulation including via a Real Time Digital Simulator (RTDS) with hardware-in-the-loop testing capability. Summary of Position Duties: This position supports the Grid Operations and Planning Research area within **** Research & Development department. The engineer will support projects and in time lead efforts to deploy and evaluate the performance of emerging technologies in this arena. The position is primarily focused on tools to support grid operations with an emphasis on power system analysis, power system modeling and simulation including digital twins, “big data”analytics, and visualization. However, the work may involve projects in other areas of the power system. Knowledge of databases, data structures, computer networking is desirable as well as an aptitude to apply engineering analysis to solve problems. Education Requirements: •Master of Science in Electrical Engineering (EE) required •Proficiency in power system modeling and simulation (RTDS, PSCAD, or PSS/E) required. •Specialization in Power Systems desired •Training in/experience with computer programming (Python, C#, SQL) desired •Training in/experience with data science desired Job Responsibilities •Develop research plan to evaluate new technology •Manage multiple tasks at one time •Provide documentation of study assumptions and methods used to arrive at results •Provide informative reports and presentations on projects •Some overnight travel may be required but this is not extensive. Knowledge, Skills & Abilities •Must demonstrate good communication skills, both internal and external to the company •Must have excellent organizational skills •Must possess analytical skills as well as the ability to manage multiple projects simultaneously •Must work well in a team environment •Must have the ability to manage your own work schedule and work with limited direction •Must have strong initiative -a self-starter •Must be great at problem solving Work Location/Arrangement

+ Client is seeking a skilled and experienced Electrical Engineer with expertise in the field of Renewables/Solar/Power Systems to design and develop renewable energy systems for our utility client. + The successful candidate will be responsible for designing and testing electrical components and systems that are optimized for renewable energy sources specifically solar. (Within the Protection and Controls group). + Provide short-circuit analysis, breaker-duty study results, and protection requirements to interconnect a customer owned facility to company owned transmission system. + Create and update short-circuit model using customer provided facility data using Siemens Gridscale X (formerly known as Computer-Aided Protection Engineering (CAPE)) and/or ASPEN software. + Specify protection schemes and relays at company owned facilities and the point of interconnection and review schemes based on transmission stability requirements. + Effectively communicate study results and protection requirements to interconnection customers and internal partners Actively engage in meetings with other organizations to provide technical expertise to customers and peer partners. + Additional responsibilities may include Transmission System/Transformer modeling to support capital projects. + 0-6 years of experience Focus or studies-internships within power systems, power delivery, renewable energy, and/or solar interest + Previous Electrical Engineering experience preferred. Strong analytical skills and attention to detail. + SQL, Visual Basic experience is a plus. **Education:** + Bachelor's degree in electrical engineering or a related field required. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

HI, Hope you're doing well This is Pankaj from 4P Consulting please see below Job Title: Electrical Engineer 2 Company: 4P Consulting Inc. Job Type: Full-Time, Hybrid (In-office at least 3 days/week) Job Description: 4P Consulting Inc. is seeking an experienced Electrical Engineer 2 to join our team in Birmingham, AL. This position will provide support to the Schatz Grid Visualization and Analytics Center (SGVAC) within Southern Company's Research & Development department. The SGVAC is an innovative research hub that focuses on situational awareness technologies for Transmission and Distribution, with applications in synchrophasor technology, control center functions, cyber security, visualization, and simulation platforms. The ideal candidate will have 3-6 years of relevant experience, a bachelor's degree in electrical engineering (accredited), and a passion for advancing grid operations technologies. The role primarily focuses on power system modeling, simulation, and data analytics, with a focus on big data, visualization, and emerging technologies in grid operations. Responsibilities: Research and Evaluation: Develop and implement research plans to evaluate new technologies related to power systems, grid operations, and data analytics. Project Management: Lead and contribute to projects focused on power system analysis, simulation, modeling, and big data analytics. Reporting & Documentation: Provide documentation detailing study assumptions, methods, and results, and present findings in clear, informative reports and presentations. Collaboration: Work closely with cross-functional teams to deploy and assess emerging technologies. This includes integrating systems such as Distributed Energy Resource Management Systems (DERMS) and Distribution Management Systems (DMS). Performance Evaluation: Evaluate the performance of new technologies and tools supporting grid operations, including the use of Real-Time Digital Simulators (RTDS) with hardware-in-the-loop testing capabilities. Travel: Occasional overnight travel may be required, although not extensive. Knowledge, Skills & Abilities: Technical Skills: Strong understanding of power system analysis, modeling, and simulation techniques, including expertise in data analytics and visualization tools. Programming & Data Science: Experience with computer programming languages such as Python, C#, or SQL, and familiarity with data science methodologies. Problem Solving: Strong problem-solving abilities, particularly in the application of engineering analysis to address complex challenges. Communication Skills: Excellent communication skills for internal and external collaboration, with the ability to present technical findings clearly and concisely. Organizational Skills: Ability to manage multiple projects simultaneously, with a keen attention to detail and the ability to manage work independently. Teamwork & Initiative: Ability to work well in a collaborative team environment while also being a self-starter with a strong sense of initiative. Education & Experience: : Bachelor's degree in Electrical Engineering from an accredited institution (3-6 years of related experience). Preferred: Master of Science in Electrical Engineering (EE) with a specialization in Power Systems. Desired: Experience with computer programming (Python, C#, SQL), and data science. Desirable: Knowledge of databases, data structures, and computer networking. Work Location/Arrangement: Primary Location: Alabama Power Company (APC) Headquarters Building, 600 North 18th Street, Birmingham, AL, 35203. Work Arrangement: Hybrid work arrangement, with the expectation of in-office presence at least 3 days a week (12 days a month). Why 4P Consulting Inc.? Work in a cutting-edge research environment alongside industry experts. Opportunity to influence the development and deployment of new grid technologies. Hybrid work schedule for a balanced professional and personal life. Thanks and Regards Sr. Talent Acquisition Specialist Pankaj Mishra ********************************* ***************