Electrical engineer internship jobs in Valdosta, GA - 1,454 jobs

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Electrical Analysis - Northeast section of the Materials & Process Engineering Department is seeking an individual to fulfill the role of a Senior Electrical Failure Analysis Engineer. This position will support programs and their mission of performing electrical component evaluations and root cause failure analysis. This position requires the knowledge and understanding of electrical schematics, circuit analysis, digital processing, RF analysis, die level analysis, and the materials of electrical components (metal wire bonding, substrates, solder, adhesives, & encapsulants). The devices evaluated can range from simple passive devices to complex microcircuits as well as cables, connectors, motors, etc. What You Will Do: The position requires the ability to work through each step of an analysis, which may include external visual photo-documentation, electrical test, non-destructive troubleshooting, environmental testing, x-ray evaluation, destructive testing, decapsulation, cross-sections, internal visual photo-documentation, scanning electron microscope (SEM) evaluation, and writing a detailed final report. Operate the available laboratory equipment such as microscopes, oscilloscopes, power supplies, multimeters, LCR analyzers, curve tracers, semiconductor parameter analyzers, spectrum analyzers, network analyzers, frequency generators, signal generators, power meters, hi-pot testers, megohmmeters, laser millers, plasma etchers, chemical jet etchers, bond puller, etc. Researching, investigating, and experimenting with various new failure analysis techniques. Work on several analyses concurrently. Participating and collaboration across the department to work with engineers in other disciplines such as materials and chemistry. The Sr Electrical Engineer - Failure Analysis job is in Andover, MA and the position is onsite. Qualifications You Must Have: Typically requires a Bachelor's degree in Electrical Engineering and a minimum of 5 years of prior relevant experience. In absence of a degree, 9+ years of experience. An advanced degree in a related field may be substituted for additional years of experience Experience in electronic component failure analysis Experience in using electrical test equipment. Qualifications We Prefer: Knowledge of reading electrical schematics and circuit analysis Familiarity with component data sheets and drawings Data collection and presentation skills to write a cogent report, supporting the analysis conclusion and if necessary, present the data and findings Technical working knowledge of electrical components and their application What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. #LI-SM4 As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Electrical Engineer - Mission Critical Projects TECfusions is the fusion of Technology, Environmental Protection, and Community support. We address complex infrastructure challenges including hyperscale capacity demands, energy reliability, sustainability, environmental conditioning, and resilient power systems. Our work focuses on delivering energy-reliable, future-ready infrastructure through proven engineering practices that support global digital growth while protecting our planet. We welcome individuals who want to build meaningful, high-impact infrastructure in a collaborative, technically rigorous environment. About the Role As an Electrical Engineer, you will play a key role in the design, coordination, and execution of electrical systems for hyperscale data centers and other mission-critical facilities. You will work closely with senior engineers and project leadership while independently owning defined scopes of work and serving as a technical resource across project phases. Key Responsibilities - Develop, review, and coordinate electrical designs and documentation (BOD through IFC) - Serve as a technical point of contact for electrical coordination - Support construction and commissioning efforts - Participate in value engineering and constructability reviews - Review drawings, specifications, and calculations - Support QA/QC processes - Perform or review electrical studies - Participate in site visits and inspections - Provide guidance to junior engineers Qualifications - Bachelor's degree in Electrical Engineering or related discipline - 5-10+ years of experience - Experience with power distribution systems - U.S. work authorization - EIT or PE preferred - Strong communication and analytical skills - Willingness to travel Preferred Experience - Data center electrical systems - AutoCAD, Revit, or BIM tools - Electrical studies experience - Commissioning exposure - Power generation or renewables TECfusions is an Equal Opportunity Employer

As a strong and stable company since 1960, Holder provides nationwide construction management services on complex projects in the aviation, office, technology, education, hospitality, and interiors markets. Our mission is to provide clients with quality construction services, across the country, supported by our offices in Atlanta, Charlotte, Columbus, Dallas, Denver, Phoenix, San Jose and Washington, DC. At Holder, our most valuable resources are our people, who carry forth our core values, brand, and reputation for performance. We are seeking a highly motivated Electrical Design Engineer to join our team in the Atlanta that will support Mission Critical construction operations throughout the country. The ideal candidate for this job is a team player who thrives in a challenging and fast-paced yet supported environment. Your job is to do whatever it takes to help the team succeed. Required Experiences And Skills Has experience with the design process and management of complex Mission Critical projects, including processes, teams, and deliverables Understands risks and roles associated with varying project delivery methods Understands principals of contract documents and agreements Takes initiative to identify, track and actively address design and engineering challenges during the design and construction phases of a project. Ability to read construction drawings and specifications with primary experience with electrical and controls. Understanding and able to reference and apply National Electrical Code (NEC) standards and requirements. Ability to proactively articulate design document expectations and assess actual document status by phase (SD, DD, CD) Ability to conduct cross-discipline drawing coordination and design completion/quality reviews specifically for the MEP disciplines. Can contribute constructability, technical expertise and engineering solutions to a project's design evolution Ability to lead and manage the creation of Integrated Electrical Room concepts based on client or projected selected equipment. Ability to manage subcontractors in the completion of integrated design concepts to finalized products ready for manufacturing. Outstanding communication and time management skills Ability to work in a highly-collaborative environment Ability to work with minimal supervision; self-starter Manage deadlines, maintain files, and provide reporting to department leadership and/or jobsite leadership Requirements For This Position Include Candidate will preferably have 3-5+ Years in an Engineering position. Excellent verbal and written communication skills - ability to effectively communicate across projects and departments with associates of varying skill level. Also, be able to effectively communicate with third party organizations and consulting entities. Earn the trust of associates but maintain ability to independently assess and evaluate issues. Ability to have difficult conversations, free of emotion. Have a high level of morality and ethics. Proactively adjust priorities based on department, project and company needs and communicate adjustments. Be strategic and solutions/goal oriented and detail-oriented, but flexible to changes in plan. Independent worker with a collaborative mindset. Ability to effectively collect information and ask questions, analyze, evaluate, and make recommendations and then organize the appropriate teams for group decision making. Good listener and detail oriented. Escalate issues timely. Ability to innovate and comfortable being introduced to new technology. Maintains a continuous improvement mindset. Proficient in Microsoft based software including Word, Excel, Outlook, and PowerPoint. Highly organized, detail oriented. Coach and mentor others with meaningful feedback. Open to receiving meaningful feedback. Be open to additional responsibilities as role and department services evolve.

GL Staffing is seeking for a Manufacturing Engineer - Electrical with expertise necessary to design, develop, and implement manufacturing systems, processes, and tooling that support plant production activities. Salary: 70k - 80k a year (Based on experience) Location: Orlando, FL Job Duties and Responsibilities Develops test, manufacturing, and various assembly processes. Designs, develops, and maintains electrical/electronic test fixtures, jigs, and automated test equipment (ATE). Uses engineering tools and statistical concepts to maintain and continuously improve manufacturing processes. Investigates process issues and initiates corrective actions. Generates and maintains production-level documentation and operating procedures. Specifies and initiates the purchase of manufacturing tools, equipment, and supplies. Plans, specifies, and justifies capital equipment expenditures. Leads product and/or process improvement teams. Designs and develops test systems and electronic systems to support product testing and manufacturing. Collaborates closely with cross-functional engineering teams in a concurrent engineering environment. Performs other duties as assigned. Knowledge & Skills Familiarity with electronic design of test fixtures and systems is required. Hands-on role requiring interaction across multiple disciplines within a manufacturing environment. Proficiency with software applications such as Microsoft Word, Excel, and PowerPoint. Experience with AutoCAD, SolidWorks, Minitab, and Microsoft AX is preferred. Strong written and verbal communication skills are required. Education Bachelor's degree in Electrical Engineering Three (3) years of engineering experience in a manufacturing environment. Must be able to handle ITAR-controlled documents without requiring an export license. Physical Requirements & Working Environment Ability to sit and stand for extended periods. Primarily office-based work environment. Minimal lifting required. Compensation & Benefits Comprehensive medical, dental, and vision insurance. 401(k) retirement savings plan. Paid Time Off (PTO). Company-paid life insurance. Company-paid short-term and long-term disability insurance. Opportunities for career advancement and professional development. Apply now!

Join Ingenuity Engineers, Inc. as an Electrical Engineer II and become an essential part of our dynamic team! In this role, you'll work side by side with talented Project Engineers and Project Managers to craft, detailed electrical design documents. Your work will play a key role in ensuring that our projects are compliant and ready for permits. If you're passionate about shaping the future of electrical design and want to be a part of a forward-thinking team, we want to hear from you! Key Responsibilities: Understands advanced electrical theory/calculations, electrical system components and devices. Interprets codes, standards and design inputs with the ability to apply them within the design. Develops calculations, design narratives and work plans to be used as the basis of design of power, lighting and fire alarm plans, single line/riser diagrams, panel and light fixture schedules and project specifications with minimal direction. Assumes the role of Engineer of Record for own projects. Reviews the work of others and gives specific guidance to the project team to advance the design. Provides mentorship to team members with less experience and training. Applies advanced engineering principles to solve technical and coordination issues. Manages project designs and budgets with limited oversight. Attends internal and client coordination meetings, provides direction, make technical decisions and ensure project goals are achieved. Performs site visits and investigations with little or no supervision if needed and resolve any challenges encountered. Cultivates relationships with clients to foster additional projects. Enhances leadership and management abilities. Provides cross-disciplinary technical and engineering assistance. Contributes to development efforts. Refines and develops processes to improve efficiency and quality. Takes personal ownership of the work produced. Required Qualifications: Bachelor's degree with P.E. Extensive proven relevant technical and field experience. Previous Leadership experience preferred. Experience working in a professional A/E office, Consulting Firm, Construction Contractor, or equivalent. Proficiency in Revit, AutoCAD, Microsoft Office, Bluebeam and other basic software. Strong written, verbal and communication skills with the ability to participate in a collaborative team environment, including coordination with people/teams outside of the company. Comprehensive understanding of the components of mechanical, plumbing, and fire protection systems that require power, with the ability to integrate those requirements into the electrical design. Ability to sit, stand, walk for extended periods, with occasional bending and the capacity to lift up to 10 lbs. as needed. Ability to travel

The Project Electrical Engineer IV contributes and works with the project team in the development and project completion of assigned engineering projects. The Project Electrical Engineer IV is responsible for completing project tasks within a specified budget and schedule and frequently interacts and works directly with clients. The Project Electrical Engineer will analyze processes and systems to identify ways to improve efficiency, increase quality, and reduce costs in collaboration with the project team. What To Expect Day-To-Day: Leads the project team to create an action plan for the development and project completion of assigned engineering projects, ensuring projects remain within a specified budget and schedule. Responsible for bringing project from the design stage through to completion with multiple project team members. Interacts and works directly with clients, conducts preliminary evaluations, prepares various reports, produces detailed technical specifications and drawing packages, and prepares permit submittals for engineering projects. Balances multiple tasks on multiple projects. Coordinates with the project team regarding RFIs, submittals, contract modifications, and other changes to the project. Analyzes processes and systems to identify ways to improve efficiency, increase quality, and reduce costs. Collaborates with the Project Managers to identify and troubleshoot problems. Coordinates with other engineering departments when necessary. Participates in site visits, agency meetings, and municipal meetings as needed. WHAT YOU NEED TO BE QUALIFIED: Water and Wastewater Experience. Bachelor's degree in engineering or a related field. Professional Engineer registration or the ability to acquire registration quickly through reciprocity. 15 years' professional experience required. Working knowledge of Microsoft Word, Excel, and Outlook required. Design and plan production experience utilizing AutoCAD, AutoCAD Electrical and/or Revit is required. Experience with Arc Flash software such as eTap or SKM is required. Extensive knowledge of the NEC. The ability to balance multiple work assignments on multiple projects at the same time is required. The ability to work alone but also effectively as part of a team is required. Requires process-oriented thinking with strong organizational and technical skills. Requires excellent communication, and the ability to take and understand directives from Project Engineers and Project Managers. The ability to complete work consistently, with moderate flexibility to accommodate varying demands from Project Managers is required. Prefer candidates with US BASED experience in acquiring permits from review agencies on a local, state, and federal level, including direct coordination and communication. Candidates are required to have a valid driver's license and an acceptable motor vehicle and criminal record as determined by McKim & Creed. Candidates are required to pass a pre-employment drug screening. We have an exciting opportunity to join our team. If you want to work at a company that will help improve the future of the communities where we live work and play, we're glad you found McKim & Creed. WATCH THIS VIDEO TO LEARN MORE ABOUT WHAT IT'S LIKE TO BE A PART OF OUR TEAM! WHAT WE OFFER: Join a company that puts its employees first. Ranked as one of the Best Firms to Work For, here are just some of the reasons to become part of the McKim & Creed team: Employee Stock Ownership Plan (ESOP):All employees are owners & benefit from profits earned Competitive pay+ paid holidays, bereavement and parental, medical, and military leave Multiple office locations to work from:Stick close to home or travel for a change of scenery Growth opportunities & training:Grow confidently in your career with our mentoring & training options Professional development:Tuition reimbursement, early career professional program, online courses & more Work that makes a difference:See the direct impact your work has on our communities Collaborative, supportive team:People to help you solve problems, cheer successes & encourage you along the way McKim & Creed is an Equal Opportunity and Affirmative Action Employer, and VEVRAA Federal Contractor and will consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability status and maintains a Drug Free Workplace.

Responsibilities Design & Drafting: Produce detailed electrical designs and construction documents-especially low-voltage systems (e.g., power, lighting, telecom, fire alarm, data/voice, and security systems). Coordination: Work closely with architects and MEP (mechanical, electrical, plumbing) peers to integrate systems seamlessly. Code & Standards Compliance: Ensure all designs follow NEC, NFPA, relevant Georgia codes, and best engineering practices. Document Management: Prepare and maintain drawings in AutoCAD/Revit, specifications, and mark-ups. Track document revisions rigorously. Client & Contractor Interaction: Field questions and provide design clarifications during bidding and construction. Problem Solving: Tackle practical challenges-like conduit routing, panel scheduling, voltage drop, load calculations-without waiting for someone else to fix it. Project Efficiency: Balance quality and budget. Meet deadlines straight, no excuses. Qualifications Education: Bachelor's Degree in Electrical Engineering, Electrical Engineering Technology, or a closely related discipline. Experience: Minimum of 2 years in electrical design Technical Skills: Proficiency in AutoCAD; Revit or BIM experience is a plus. Comfortable with load calculations, panelboards, voltage drop, conduit sizing. Communication: Strong writing and speaking skills-be able to make your designs understood by non-engineers. Detail-Oriented: You must catch the little stuff-typos in schedules, incorrect symbols, missing details. Perks & Culture Full-Service MEP Firm: You'll be cross-trained with mechanical, plumbing, and fire protection folks-not stuck doing the same circuit design over and over. Growing Small Team: Lean, flexible environment-your work matters here. Regional Reach: Active in Georgia and beyond, LJ&A holds registrations in 36 states, plus Puerto Rico and D.C.

Electrical Engineer (2-3 Years Experience) We are seeking a motivated Electrical Engineer with 2-3 years of experience in electrical design to join our growing team. The ideal candidate has hands-on experience with electrical system layouts for commercial or industrial projects and is proficient in Revit and/or AutoCAD. Familiarity with SKM or ETAP software for SCCAF studies is a strong plus. Responsibilities Design and model electrical distribution systems in 2D and 3D using Revit and AutoCAD Prepare electrical layouts, schematics, and construction documents in compliance with the National Electrical Code (NEC) Assist in performing Short Circuit, Coordination, and Arc Flash (SCCAF) studies using SKM or ETAP Collaborate with project managers, engineers, and design teams to deliver high-quality design packages on schedule Support project documentation, reporting, and drawing set production for client submittals Contribute to design automation efforts (Excel macros, Dynamo, or similar) to improve efficiency Qualifications Bachelor's degree in Electrical Engineering or related field 2-3 years of relevant experience in electrical design (commercial or industrial preferred) Proficiency in Revit and/or AutoCAD Experience with SKM Power Tools or ETAP for SCCAF studies is a plus Strong communication skills, both written and verbal Detail-oriented with a commitment to accuracy and quality deliverables Programming/scripting knowledge (JavaScript, VBA, Dynamo) is beneficial but not required

Company is a leader in industrial automation and innovative circular solutions, delivering cutting-edge technologies that help companies optimize operations and sustainability. Projects span advanced material handling, automation systems, and industrial control solutions. Electrical Designer (Contract / Contract-to-Hire) Location: Atlanta, GA Schedule: Hybrid and Remote - Monday-Friday, 8:00 AM - 5:00 PM Why This Role Matters: Are you a hands-on Electrical Designer looking for a role where your work directly shapes industrial projects from the ground up? This is an opportunity to take control panel designs from concept to completion, collaborate with talented engineering teams, and contribute to projects that impact real-world industrial systems. We're seeking someone who is passionate about electrical design, highly skilled in AutoCAD Electrical, and ready to bring discipline, collaboration, and attention to detail to every project. What You'll Do: Take control panel projects from initial concept to fully completed designs Redline mark-ups and update schematics with precision Collaborate with engineers to deliver practical, high-quality industrial electrical solutions Contribute ideas and improvements to design processes What We're Looking For: 3+ years of current AutoCAD Electrical experience (must be actively using it in daily work) Strong experience with control panel design for industrial applications Local to Atlanta and able to work onsite (hybrid 1-2 days/week considered) Self-motivated, detail-oriented, and collaborative Bonus / Nice-to-Have: Experience working in Manufacturing or for EPCs Familiarity with industrial power distribution, motor control, or PLC systems Why You'll Love Working Here: Take ownership of projects from start to finish Join a professional, supportive team that values collaboration and high-quality work Competitive pay and the potential for contract-to-hire placement Exposure to diverse industrial projects that grow your expertise Application Process: Interviews: In-person / onsite in Atlanta (1st interview) Submittals: Please include your current pay rate and what you are seeking when applying Hiring process includes a pre-employment screening process - Criminal Background Check and Drug Screening Must be local to the Atlanta, GA area - Relocation is not offered Accepting applicants who are interested in a 6-month Contract Assignment or Direct hire position with the company Citizen Status: US Citizen or Green Card

Our Summer Internship Program is meticulously designed to provide students with an immersive and dynamic experience within our industry, offering a taste of what it's like to be part of our professional team. We strive to simulate a full-time job, enabling our interns to work hands-on with cutting-edge technology, contribute to meaningful projects, build strong relationships with coworkers, and develop strategic problem-solving skills. Our program is highly selective, hosting only a handful of interns each year, ensuring personalized attention and ample opportunities to work closely with AV team members. We are hiring for various roles and locations throughout the U.S. During the interview process, we will discuss specific details regarding the team and location. **Summary** As an **Electrical Engineering Intern** , you'll join AV's Test Equipment Engineering Team and contribute to the design, development, and testing of electrical systems for unmanned aircraft and advanced robotics. You'll assist in building and supporting test equipment, writing software, and troubleshooting systems - gaining valuable, real-world experience across the product development lifecycle. This is an exciting opportunity to apply your academic training in a high-tech, fast-paced environment while working alongside experienced engineers and mentors. **Position Responsibilities** + Assist in the **design, development, and troubleshooting** of test equipment for printed circuit board assemblies (PCBAs), subsystems, and full systems + Help develop and deploy test software to support hardware integration and validation + Support the **maintenance and upgrade** of test systems used during production + Participate in **test plan creation** , requirements documentation, and validation strategies + Assist in executing tests on power systems, avionics, and propulsion components (functional, performance, and environmental) + Learn and apply **engineering best practices** , processes, and documentation standards + Support hardware bring-up, test station calibration, and system verification + Work collaboratively with cross-functional teams including hardware, software, and systems engineers + Perform other related duties as assigned to support ongoing engineering efforts **Basic Qualifications (Required Skills & Experience)** + **Currently pursuing a Bachelor's degree** in **Electrical Engineering** , **Computer Engineering** , or a related field + Academic or personal project experience in one or more of the following: + **Power electronics** , battery systems, or electric motors + **Embedded systems** , FPGA, or RF systems + **Digital and analog circuit design** + Familiarity with electrical protocols such as **I2C, SPI, UART, USB, CAN** , or **LVDS** + Basic programming knowledge in **C, C++** , or **C#** + Exposure to test equipment like oscilloscopes, multimeters, and power supplies + Strong analytical and troubleshooting skills + Effective communication skills and ability to work well in a team **Preferred Qualifications & Competencies** + Hands-on experience with PCB testing, debugging, or electronics prototyping + Exposure to Visual Studio, Git, or hardware/software integration environments + Familiarity with version control and defect tracking tools + Experience with scripting or automation for test procedures (e.g., Python) + Passion for aerospace, robotics, or defense-related systems + Demonstrated initiative, accountability, and a willingness to learn + Ability to manage time effectively and adapt in a fast-paced, team-oriented environment **Physical Demands** + Ability to work in an office and light manufacturing/test environment (Constant) + Required to sit, stand, and use computer equipment for extended periods (Frequent) + May be required to lift and carry up to 10 lbs. (Occasional) **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

About the Role & Program "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The approximate dates of this internship are June - December 2026. What You Will Do: Assist project Engineers - Civil, Structural, Mechanical, Plumbing, and Electrical, in all phases of project work, from drafting, on-site as-built documentation, design coordination with outside design consultants, field data collection, light design / production work, construction administration, commissioning, and closeout documentation for a variety of projects ranging in scope from minor rehabs to building new facilities. Required Qualifications & Skills: * Demonstrated/proven strong leadership, technical and interpersonal skills. * Self-starter with demonstrated initiative - able to handle multiple tasks and priorities. * Availability to work various shifts commensurate with project requirements. * Experience with Microsoft Office suite: Word, Excel, PowerPoint and Outlook. * Ability to work under deadlines, on short notice and support extended/off-hours when needed to support project or resort engineering issue. Preferred Qualifications & Skills: * Prior related work experience is desired, including co-op/intern programs with a focus on architecture, engineering, energy systems, energy engineering or construction, low voltage, underground utilities, distribution engineering. * Experience working with AutoCAD, REVIT and/or BIM (Building Information Modeling), SKM, ETAP, HVAC, Lighting Control System, Power System Analysis, Emergency Generator, Emergency Power, Solar, Heat & Power Plants. Education: * Currently enrolled as a Junior, Senior or Graduate student at an accredited college/university, earning a Bachelor's or Master's degree in electrical engineering, Electrical Design, Electrical Architecture. * GPA of 3.0 or higher (no rounding) * Preferred Education Cumulative GPA of 3.0 or higher (Note: Please, no rounding) as shown on a transcript. Eligibility Requirements & Program Information * Be enrolled in an accredited college/university pursuing a degree taking at least one class at time of application OR currently participating in a Disney College Program or Disney Internship. * Be at least 18 years of age * Possess unrestricted work authorization * Current Disney Interns, College, International, or Culinary Program Participants: You may only work for ONE consecutive year (12 months) in any combination of an internship and/or program. Additional Information * Be compliant with The Disney Look appearance guidelines * Fully available from Monday through Friday with occasional weekends or holidays pending project need, up to 40 hours each week, early mornings or late nights are a possibility, bulk of work time will be during traditional 8am-5pm * Able to provide/have reliable transportation to/from work * We provide limited housing opportunities for Florida Based Professional Interns through American Campus Communities, for more information click here The pay rate for this role in Orlando FL is $31 for undergraduate student per hour and $36 for graduate student per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit: ****************************************

Electrical Engineering Intern - Electric Power Software and Modelling Florida Municipal Power Agency (FMPA) is a wholesale power agency owned by municipal electric utilities in Florida. FMPA's mission is to provide power that is low-cost, reliable and clean, as well as provide value-added services for its owner-customers. FMPA is looking for a qualified student to be part of our Engineering Services Department working on a variety of assignments related to modeling, mapping and power system analysis for electrical systems at FMPA's electric power plants as well as electric distribution systems of FMPA's member utilities. Position Status Full Time for Spring 2026 Job Overview The selected student would be responsible for updating or creating one line and three line diagrams in AutoCAD. Settings review in ETAP PowerStation (modeling of large electric power plants). Produce bid documents consisting of layout drawings, one-line, riser, schedules, details, and specifications. No experience in these software platforms is required. FMPA Engineers and Member Services staff will provide oversight, guidance and the necessary training in the use of the software platforms. Other assignments will be in related fields as agreed and as time allows. This is an excellent opportunity for students to learn about real apparatus and design conventions applied at electric power plants and in electric utility distribution systems in the field while gaining experience using widely adopted electric power industry software platforms. Required Program of Study Electrical Engineering / Computer Engineering preferred. Other Engineering programs of study may be considered if sufficient electric circuits and Power System coursework has been performed. Required Skills Familiarity with Word and Excel Solid verbal and written communications skills Organized and task-oriented Experience with AutoCAD is valuable but not required Understand power system theory - 3-phase vector math, power factor, symmetrical components Class Standing Junior or Senior preferred. Sophomores may be considered with appreciable completed coursework.

Our Story: Dover Food Retail (DFR) is a leading manufacturer of Display Cases, Specialty Products, Refrigeration Systems, Power Systems and Comprehensive Services; and leading our industry by Innovating What's Next in glass doors and intelligent merchandising technologies that keep food safe under brands such as HillPhoenix and Anthony. DFR is part of the Climate and Sustainability Technologies segment of the Dover Corporation (NYSE: DOV). Dover is a diversified global manufacturer with annual revenues in excess of $7 billion. DFR is built on creativity and customer-centric innovation delivered by people invigorated by a strong sense of responsibility to help our customers win in their marketplaces. The relationships we build with our customers are as important to our success as the products we manufacture. This collaborative environment delivers FRESH THINKING, reassuring our customers that they choose the best when they choose to work with the people of Dover Food Retail. Job Title: Electrical Engineering Intern Location: Conyers, GA What we're looking for: We are looking for an Engineering Intern. Our Engineering Internships are project-based internships in development, controls, systems, testing, or operational. This role will assist engineering management with skill and experience-level appropriate research, modeling, design, and/or engineering documentation with existing workflows with increasing complexity. What you'll be responsible for in this role: You will be guided by structural goals and objectives and will have a responsibility to deliver on inspiring projects. Your manager will offer coaching, mentoring, and direction. You will be assigned to a technical project in one of the following disciplines: Electrical Engineering What are the basic qualifications? Enrollment in 4-year Electrical Engineering degree program Minimum 3.0 GPA on a 4.0 scale What are the preferred qualifications? Rising Junior to rising Senior Level progressing towards a bachelor's degree in electrical engineering Analytical and conceptual thinking, using logic and reason, creative and strategic thinking Effective statistical analysis skills Effective research and communication skills Effective with written and oral communications Problem solving - being able to solve complex problems effectively and efficiently To be a great fit for the role: Strong Business Acumen and Sound Judgement Builds and Manages Collaborative Relationships Experience with AutoCAD or SolidWorks Results Driven How We Define Our Values and Why You Should Join Our Team: The backbone behind our collection of outstanding businesses is a team of dedicated employees who protect and enhance our valued reputation for quality and delivering what we promise. It's our values that define Dover to all of our key audiences: our shareholders, customers, prospective employees and especially to ourselves. These values must be expressed in our work and embody our actions, as they form the basis by which we do our jobs, make decisions, and measure our performance. It's our unwavering commitment to maintaining our values that defines who we are as a Company. Collaborative Entrepreneurial Spirit Winning Through Customers Respects and Values People Expectations for Results High Ethical Standards, Openness, and Trust The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company. Dover Food Retail is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.

The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to: Responsibilities Design electrical systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities. Document all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc. Maintain project document organization Manage time and meet commitments Understand Ohms Law, AC/DC, Electric and magnetic fields Understand power system theory - 3-phase vector math, power factor, symmetrical components Understand capacitors, inductors, and resonance Design lighting for food processing spaces, including lighting calculations for emergency and inspection lighting level needs. Coordinate fixture placement/mounting with other trades. Design fire alarm systems per NFPA 72, 101, and local building code. Design low voltage systems such as LAN, phones, PA, Wi-Fi, access control, cameras, etc. Produce bid documents consisting of layout drawings, one-line, riser, schedules, details, and specifications. CAD - add 2D devices to Xrefs Procure long lead light fixtures and power distribution equipment such as switchgears, switchboards, panelboards, transformers, MCC's, generators, variable speed drives, and UPS's. Transformer configurations Estimate weights of main tray/trapezes and equipment needing support Assist in managing electrical bid process for clients, observing construction, and assisting with startup. Project planning and feasibility studies. Actively participate in and support department-wide standard development, updates, and maintenance. Research electrical building/power materials and best practices Support talent growth within our organization About You Junior or Senior pursuing a bachelor's degree in electrical engineering or related field. Proficiency with MS Office (Excel, Word, Access). Familiarity with three phase power, the National Electric Code, wireless radio systems, fire and security systems, Fiber or LAN cabling is a plus. Familiarity with designing lighting, fire alarm systems, and low voltage systems for building spaces, including lighting calculations, and coordinating fixture placement with trades. GPA: 3.0 or above Travel to customer project sites for fieldwork, review, audit, and meetings, estimated 25%. Familiarity AutoCAD, Revit, or similar software. Physical Requirements Prolonged periods sitting at a desk and working on a computer. Must be able to lift-up to 15 pounds at times. Travel Requirement Up to 25% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics. JOB CODE: 1002524

About the Role & Program "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The approximate dates of this internship are June - December 2026. What You Will Do: Assist project Engineers - Civil, Structural, Mechanical, Plumbing, and Electrical, in all phases of project work, from drafting, on-site as-built documentation, design coordination with outside design consultants, field data collection, light design / production work, construction administration, commissioning, and closeout documentation for a variety of projects ranging in scope from minor rehabs to building new facilities.Required Qualifications & Skills: Demonstrated/proven strong leadership, technical and interpersonal skills. Self-starter with demonstrated initiative - able to handle multiple tasks and priorities. Availability to work various shifts commensurate with project requirements. Experience with Microsoft Office suite: Word, Excel, PowerPoint and Outlook. Ability to work under deadlines, on short notice and support extended/off-hours when needed to support project or resort engineering issue. Preferred Qualifications & Skills: Prior related work experience is desired, including co-op/intern programs with a focus on architecture, engineering, energy systems, energy engineering or construction, low voltage, underground utilities, distribution engineering. Experience working with AutoCAD, REVIT and/or BIM (Building Information Modeling), SKM, ETAP, HVAC, Lighting Control System, Power System Analysis, Emergency Generator, Emergency Power, Solar, Heat & Power Plants. Education: Currently enrolled as a Junior, Senior or Graduate student at an accredited college/university, earning a Bachelor's or Master's degree in electrical engineering, Electrical Design, Electrical Architecture. GPA of 3.0 or higher (no rounding) Preferred EducationCumulative GPA of 3.0 or higher (Note: Please, no rounding) as shown on a transcript. Eligibility Requirements & Program Information Be enrolled in an accredited college/university pursuing a degree taking at least one class at time of application OR currently participating in a Disney College Program or Disney Internship. Be at least 18 years of age Possess unrestricted work authorization Current Disney Interns, College, International, or Culinary Program Participants: You may only work for ONE consecutive year (12 months) in any combination of an internship and/or program. Additional Information Be compliant with The Disney Look appearance guidelines Fully available from Monday through Friday with occasional weekends or holidays pending project need, up to 40 hours each week, early mornings or late nights are a possibility, bulk of work time will be during traditional 8am-5pm Able to provide/have reliable transportation to/from work We provide limited housing opportunities for Florida Based Professional Interns through American Campus Communities, for more information click here The pay rate for this role in Orlando FL is $31 for undergraduate student per hour and $36 for graduate student per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit: **************************************** Job Posting Segment: Worldwide Safety, Health, Engineer & Sourcing Job Posting Primary Business: Safety Assurance (WSHES) Primary Job Posting Category: Engineering Intern, Other Employment Type: Full time Primary City, State, Region, Postal Code: Lake Buena Vista, FL, USA Alternate City, State, Region, Postal Code: Date Posted: 2026-01-26

Overview: Stryten Energy delivers premium energy storage solutions that power everything from warehouses and distribution centers to cars, trains and trucks that keep people on the move and essential supply chains running. This role is supporting the launch of a new lithium ion forklift battery that has been fully designed and manufactured in house. Our stored energy solutions include advanced lead and lithium batteries, intelligent chargers and cloud-based software that help companies make smart fleet design decisions. The successful candidate will be part of our Lithium group and will focus on testing leading edge Lithium battery solutions for several different applications from motive power to green energy grid storage, from the system level down to the circuit level. They will also potentially provide electrical and hardware design and troubleshooting support to the manufacturing facility. They will work independently and as part of a multi-disciplinary team to develop products and systems for a wide range of applications. This position will allow the successful candidate to work on a project from start to finish, gaining knowledge and experience in all aspects of the design phase, from idea to delivered product. This is a contract position requiring on-site daily work in our Alpharetta, GA facility. Responsibilities: - Conduct experimental tests, analyze test data, and write test reports. - Create test plans and procedures to support production test system development. - Work with external laboratories to test and qualify products to applicable environmental, safety, industrial, military, and Electromagnetic Compatibility (EMC/EMI) standards. - Collaborate with software team on device bring-up, hardware integration, and system development. - Develop and execute hardware Integration, Verification, Validation and Qualification plans. - Lead and participate in internal and external design reviews. - Collaborate with third party suppliers and Subcontract Manufacturers (SCM). - Participate in Design Failure Mode and Effect Analysis (DFMEA) activities internally and with suppliers. - Participate in Design for Manufacturability (DFM) and Design to Cost (DTC) activities internally and with suppliers to ensure product design is cost effective and conforms to the manufacturing & assembly plans. Essential Qualifications - BS or MS in Electrical or Computer Engineering (or related discipline) or equivalent experience required. - Understanding of power electronics, mixed signal electronics, and associated technologies. - Strong analytic problem-solving skills. - Experience preparing product and engineering technical specifications and product performance test procedures or plans. - Experience with Altium and/or OrCAD for schematic capture and PCB layout. - Ability to work effectively and collaboratively in a team. - Demonstrate good interpersonal skills. - Strong organization and documentation skills. Preferred Qualifications - Understanding of energy storage and control in multi-cell, rechargeable lithium-ion battery packs and other storage technologies. - Experience with high voltage and high-power electronics - Ability to assemble prototypes with Surface Mount Device (SMD) components. - Experience with Configuration Management (CM) and Product Lifecycle Management (PLM) tools. - Familiar with SolidWorks 3D CAD, or similar, for mechanical design. - Good working knowledge of microprocessor-based controller design and testing. - Good working knowledge of communication circuits and protocols (e.g. CAN, Serial, Ethernet, etc.). - Familiar with low-level software development, including device drivers and scripting languages. Personal Characteristics: - Positive, open minded, problem solving attitude. - Strong communication and interpersonal skills. - Self-directed, proactive approach to tasks and time management Work Environment: Normal office environment is typical. However, there may be occasional field and factory visits. Skills Electrical engineering, Hardware test, Electrical, Oscilloscope, Electrical testing, multimeter, cad software, electrical design Top Skills Details Electrical engineering,Hardware test,Electrical,Oscilloscope,Electrical testing,multimeter,cad software Additional Skills & Qualifications NICE TO HAVES - Understanding of energy storage and control in multi-cell, rechargeable lithium-ion battery packs and other storage technologies. - Experience with Thermal chambers - Experience with design - Experience with high voltage and high-power electronics - Ability to assemble prototypes with Surface Mount Device (SMD) components. - Experience with Configuration Management (CM) and Product Lifecycle Management (PLM) tools. - Familiar with SolidWorks 3D CAD, or similar, for mechanical design. - Good working knowledge of microprocessor-based controller design and testing. - Good working knowledge of communication circuits and protocols (e.g. CAN, Serial, Ethernet, etc.). - Familiar with low-level software development, including device drivers and scripting languages. Experience Level Entry Level Job Type & Location This is a Contract position based out of Alpharetta, GA. Pay and Benefits The pay range for this position is $38.00 - $49.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Alpharetta,GA. Application Deadline This position is anticipated to close on Feb 3, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Nordson Product Assembly, a global leader in Product Assembly, is seeking an experienced and highly motivated individual to join our team. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Summary of the role As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. Job Summary The Test engineer will be a part of a cross-functional team of electrical, mechanical, manufacturing, and software engineers responsible for the manufacturing and testing of new innovative products for the Nordson Product Assembly Division. The engineer will take ownership of assigned projects and will lead all required electrical manufacturing support activities to completion - from project planning to design, verification, and regulatory certifications. The Test engineer will work closely with manufacturing engineers to ensure electrical assemblies are tested and will operate correctly when completed. The Test engineer will also support and collaborate closely with operations, and external suppliers to ensure a seamless launch and commercial success of new products. Essential Job Duties and Responsibilities Designs and implements, either working alone or as part of a team, high-quality production test processes for electronic, electro-mechanical, pneumatic, and hydraulic product verification. Participates in product design reviews to ensure design flow technology (DFT) principles are adhered to. Works with Electrical and Software engineers to define built-in-test requirements. Analyzes and resolves problems with a minium level of guidance and direction. Participates in continuous improvement projects to increase efficiency and effectiveness. Helps identify creative methods to reduce manufacturing test time, without reducing test coverage. Performs test data analysis to identify areas for product and/or manufacturing process improvements. Coordinates report results with broader team and develop countermeasures where necessary. Fault Analysis - diagnose and resolve all wiring and electrical operation of the final assemblies. Technical Documentation - document Testing equipment with schematics, revision history and defect resolutions, test plans, and test and validation results. Education and Experience Requirements Bachelor's degree in electrical engineering or equivalent. 5+ years of making and documenting testers for electrical assemblies, troubleshooting electric hardware in a multiple dimensional team environment. Skills and Abilities Understanding of mathematical and engineering principles and methods used to test systems and components such as circuit design as well as a sound knowledge of drive, automation and measurement technology. Experience with CAD design tools for schematic capture. Knowledge of manufacturing processes - Cabinet assembly and design for manufacturability (DFM). Knowledge of TestStand software. Knowledge of Industry Standards and Regulations such as UL, FCC, CE, and ISO. Excellent written and verbal communication skills in English. Ability to collaborate and work with multi-competency, cross-functional teams globally. Familiarity with programming languages such as C, C++, Python, is beneficial. Project management experience is a plus. Team leadership skills and experience is a plus. Working Conditions and Physical Demands To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Occasional worldwide travel. Job requires visitation of to various Nordson and customer sites, which have varying environments/conditions, layouts, and accessibility. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Interested? If you are interested in being a part of a team and creating an inclusive and diverse workplace, please apply online with your CV. About Nordson Product Assembly Nordson Product Assembly is the leader in precision dispensing, fluid management, and related technologies. We serve the Product Assembly end market to improve production efficiency and product quality for a variety of product manufacturing processes. By joining our team today, you will help us bring innovative ideas to life. Nordson Product Assembly is a global team that works to create adhesive dispensing solutions that deliver precise and reliable application while optimizing material use and lowering production costs for markets like appliances, automotive & e-mobility, bookbinding, electronics, filter manufacturing, paper, wood, construction and many more. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Product Assembly. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career.

Job DescriptionDescriptionJob Title: Junior Electrical Engineer (EIT / PE Track) Location: Tampa, Florida (Onsite Required) Employment Type: Full-Time, W2Compensation: $55,000 to $65,000 annual salary Schedule: Monday through Friday, 7:30 AM to 4:30 PMTravel Expectations: Occasional day travel to local sites in Central Florida. No overnight or out-of-state travel required. About the Opportunity:This is a high-impact opportunity for an early-career electrical engineer to build real-world experience in a full-service architecture and engineering environment. Based in South Tampa, our firm delivers public-sector design projects across Florida-including schools, universities, libraries, municipal buildings, and industrial facilities. You will be mentored by licensed Professional Engineers and gain direct exposure to multidisciplinary collaboration. This position is designed for someone seeking to grow into a licensed P.E. and ultimately lead projects in the built environment. Position Overview:As a Junior Electrical Engineer, you will support the electrical team on design documentation, modeling, calculations, and coordination. You'll be working under the supervision of a licensed P.E., contributing to lighting and power system design, and developing proficiency in Revit and EasyPower software. Ideal candidates are sharp, proactive, and ready to grow in a fast-paced professional setting that emphasizes internal mentorship, hands-on design, and team culture. Key ResponsibilitiesDesign Support & Technical Execution Assist in the design of electrical systems for public-sector and institutional buildings Perform calculations for lighting, power, distribution, and basic coordination Participate in site visits and field verifications Use Revit and AutoCAD to produce electrical design documentation Collaboration & Learning Work side-by-side with architectural, structural, and mechanical engineers Respond to markups and guidance from senior P.E.s Attend internal coordination meetings and gain exposure to client presentations Learn design standards related to Division 26, 27, 28 systems (power, low-voltage, fire alarm, data, etc.) Professional Development Path Participate in LEED and sustainable design efforts where applicable Document time and assignments accurately using firm's project tracking system Receive mentorship toward obtaining your Florida P.E. license Skills, Knowledge and ExpertiseRequired Qualifications: Bachelor's degree in Electrical Engineering from an ABET-accredited program Engineer-in-Training (EIT) certification, or eligible within 12 months Strong interest in building electrical systems design (not electronics or defense) Proficiency or coursework in Revit, AutoCAD, and electrical design software Solid written and verbal communication skills Ability to work onsite full-time in Tampa, FL U.S. work authorization; E-Verify eligible Ability to pass FDLE Level II background screening Preferred Qualifications: Master's degree in Electrical Engineering Internship or co-op experience in the A/E/C industry Familiarity with EasyPower or similar electrical modeling tools Familiarity with Division 27/28 systems (data, fire alarm, security) Benefits Health Insurance (75% employer-paid) Dental and Vision Insurance (available through pre-tax payroll deduction) $20,000 Company-Paid Life Insurance Long-Term Disability Insurance (required participation) 401(k) Plan with employee-managed contributions Profit Sharing (based on firm performance) Paid Time Off: Two weeks vacation (accrued), 3 personal days, 6 paid holidays Paid exam time (up to 8 hours) and reimbursement for licensure exam after 1 year Education reimbursement available on case-by-case basis Background & Clearance Requirements: Must pass FDLE Level II background screening Must meet E-Verify eligibility Must be able to obtain access credentials for school and port-related projects Ideal Candidate Profile: Recent grad or early-career engineer with an EIT or strong intent to pursue licensure Curious, accountable, and team-oriented Interested in public buildings and civic infrastructure, not product design or defense Comfortable working onsite and interfacing with real project teams Open to feedback and passionate about becoming a licensed P.E. Associate Engineering Services Full-time Engineering Electrical Engineering

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $63,795 to - $164,301 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0855 Electronics Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857056-0855-CYBER Control number 852987000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Use engineering manuals, standard publications, and technical material to obtain information and pertinent data for use by higher level engineers, contractors and/or customers. * Keep abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments. * Perform duties in support of the installation, operations, and maintenance of weapon systems, subsystems, facilities, machinery, and/or support equipment. * Perform developmental assignments in the application of established principles, techniques, methods, and procedures of professional electronics engineering in the area of installation, operations, and maintenance. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: At least one year of specialized experience equivalent to at least the GS-09 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Modeling and simulation professional theories, concepts, principles, techniques, and practices of computer engineering, electronics engineering and/or computer science. GS-12: At least one year of specialized experience equivalent to at least the GS-11 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Leading and/or performing engineering work involving electronic circuits, circuit elements and equipment systems; applying a number of diverse electronics engineering practices, techniques and processes to identify and resolve complex engineering issues; supporting the planning, testing and troubleshooting of electronics engineering systems or devices; and, developing computer aided engineering analysis and tools in support of planning and designing applications. GS-13: At least one year of specialized experience equivalent to at least the GS-12 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-14: At least one year of specialized experience equivalent to at least the GS-13 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-15: At least one year of specialized experience equivalent to at least the GS-14 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of electronics engineering concepts, principles, methods, techniques, and standard engineering practices to perform moderately difficult or relatively limited phases of a larger and more complex installation, operations, and maintenance engineering project. * Knowledge of computer aided design and drafting (CADD) programs to perform design and drafting assignments, as well as other computer applications used in support of plans, analysis, and project reports. * Skill in applying the principles, concepts, and practices of the occupation sufficient to perform limited assignments in the field of electronics engineering. * Ability to communicate factual and procedural information clearly, orally and in writing. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on