Electrical engineer internship jobs in Waco, TX

This position is for a Flight Test Engineer reporting to the ISR Sector Flight Test and Flight Operations Department. The successful candidate will become an FAA ODA Flight Analyst Unit Member, generating flight test data, or approving flight test data on behalf of the FAA. Essential Functions: Define test requirements, develop test procedures and test plans, execute and manage ground and flight test events, range and airspace management, data collection and analysis, instrumentation of test assets and documentation/ presentation of test results Interact with other systems engineers, and collaborate with our mechanical, electrical and aeronautical engineers in planning, design and manufacture of systems to ensure successful air vehicle and flight systems performance. Determine compliance with Military Specification/FAA Certification requirements and assist with the gathering of flight test data. Participate in aircraft flight testing during experimental and engineering flight tests, production acceptance and flight test support through specifically prescribed tests and maneuvers. Coordinate test flight operations. May serve as a Test Director, responsible for the execution of flight and ground tests. Qualifications: Existing Active DoD SECRET security clearance; must be able to obtain TS/SCI clearances as required. Bachelor's Degree in Aeronautical Engineering and minimum 9 years of prior relevant experience to include in flight operations including test management and execution. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. The candidate must have demonstrated expertise in airspace/range management, FAA certification requirements and systems engineering disciplines associated with a flight test/demonstration program to include requirements definition, design reviews and documentation, and systems integration. Candidate must have the ability to obtain Class III Airman certificate. Familiar with analysis and testing for air vehicle performance, handling qualities and structural loads. Knowledge/experience with FAA Part 23, 25, 27, 29 and 91 regulations. Knowledge/experience with MIL-HDBK-516 and JSSG series. The candidate must have experience in managing ground and flight test teams in various categories of aircraft. Preferred Additional Skills: Proficiency with Microsoft Office products. Graduate of a military Experimental Test Pilot School or are a FAA Flight Analyst DER with a current eCOA. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .aa415a4b-8b21-40fc-a65c-70d2b25ca29a

Our client are seeking an Electrical Engineer with strong hands-on troubleshooting skills and experience supporting day-to-day operations in a chemical manufacturing environment. The ideal candidate can quickly diagnose electrical issues in the field, mentor I&E technicians, communicate effectively with Operations and Maintenance, and lead small-to-medium engineering projects from concept through detailed design (via internal work or external engineering firms). This position provides a growth path within a fast-growing company backed by a multi-billion-dollar investment firm. About the Role Main Responsibilities: Operations & Maintenance Support Provide daily field support for troubleshooting electrical equipment, including motors, MCCs, VFDs, lighting systems, breaker coordination, transformers, protection relays, switches, UPS/backup systems, and low/medium-voltage distribution. Serve as technical authority for electricians and I&E technicians; provide coaching, training, and guidance on best practices and troubleshooting methods. Lead or participate in root cause investigations for electrical equipment failures and operational upsets. Support turnarounds, outages, and equipment commissioning activities. Stakeholder Engagement & Communication Communicate clearly with Operations, Maintenance, EHS, Reliability, Supply Chain, and leadership regarding equipment conditions, risks, and recommended actions. Prepare concise technical summaries and recommendations for both technical and non-technical audiences. Coordinate with OEMs, vendors, and third-party specialists during troubleshooting, repairs, and inspections. Engineering & Project Support Develop scopes of work, engineering specifications, one-line diagrams, load studies, panel schedules, and cable/conduit sizing for small capital projects and reliability improvements. Oversee and manage external engineering firms (EPC/E&I) during detailed engineering phases review drawings, calculations, studies, and ensure compliance with company standards and industry codes. Review and approve vendor electrical packages and ensure compatibility with existing plant systems. Support construction and installation activities; verify quality of work and perform field inspections. Electrical Reliability & Compliance Participate actively in PSM processes including MOC, Pre-Startup Safety Reviews (PSSR), Incident Investigations, and Process Hazard Analysis follow-ups. Support the development and implementation of electrical reliability programs (infrared inspections, breaker maintenance, relay testing, motor testing, etc.). Analyze operating data to identify equipment degradation and recommend preventive and predictive actions. Ensure compliance with NFPA 70, NFPA 70E, NEC, IEEE, ISA, API, and applicable OSHA regulations. Maintain and update electrical system documentation (one-lines, schematics, equipment databases). Qualifications 5 - 15 years of experience as an Electrical Engineer Four-year degree in an engineering discipline, Electrical strongly preferred. Industry/Manufacturing experience preferred. Experience with low- and medium-voltage systems required; high-voltage experience preferred. Demonstrated experience supporting PSM-regulated units strongly preferred. Required Skills Strong computer skills and proficient with internet, email, and Microsoft Office programs. Strong field troubleshooting ability in a chemical or heavy industrial environment. Strong understanding of arc flash studies, breaker coordination, and electrical safety programs. Demonstrated ability to work in a fast-moving, team environment. Ability to analyze complex technical issues and develop engineering solutions. Ability to lead, coach, and mentor technicians and junior engineers. Excellent verbal and written communication skills with all levels of the organization. Ability to balance urgent operational needs with longer-term reliability and project work. Experience with SKM, ETAP, AutoCAD, or similar tools preferred. Familiarity with industry codes standards including NEC, IEEE, IEC. Preferred Skills Experience with SKM, ETAP, AutoCAD, or similar tools preferred. Familiarity with industry codes standards including NEC, IEEE, IEC.

About Us: LTIMindtree is a global technology consulting and digital solutions company that enables enterprises across industries to reimagine business models, accelerate innovation, and maximize growth by harnessing digital technologies. As a digital transformation partner to more than 700+ clients, LTIMindtree brings extensive domain and technology expertise to help drive superior competitive differentiation, customer experiences, and business outcomes in a converging world. Powered by nearly 90,000 talented and entrepreneurial professionals across more than 30 countries, LTIMindtree - a Larsen & Toubro Group company - combines the industry-acclaimed strengths of erstwhile Larsen and Toubro Infotech and Mindtree in solving the most complex business challenges and delivering transformation at scale. For more information, please visit ******************** Job Title: Lab Engineer Work Location Houston, Texas, United States Job Description: Experience in data center operations Handson experience with cabling power distribution rack mounting and other data center operations Ability to troubleshoot and diagnose systems and technical issues Implementing disaster recovery procedures Maintaining current knowledge and understanding of security and networking best practices to offer the best solutions and protection to company systems Installing and Configuring Windows Ubuntu and CentOS operating systems ISO VHD using WDSSCCM PXE server and USB Setup and maintenance of small cluster of Virtual Machine hosts hosting 100 Virtual Machines Manage lab as needed and maintain area in accordance with safety standards Manage and maintain test hardware test racks and test equipment in the lab Should be capable to lift the servershardware up to 2530lbs Coordinate with Logistics for packing and shipping the SKU to manufacturer Support lab shipping receiving logistics and manage inventory of equipment and materials Good Communication with Customer and internal teams Good to have PowerShell scripting Designing and implementing new network solutions andor improving the efficiency of current networks Procuring network equipment and managing network installation Installing maintaining and supporting network equipment including VPN Firewalls routers proxy servers switches WAN accelerators SCCMPXE DNS and DHCP Configuring firewalls routers and switches to maximize network efficiency and security Maximizing network performance through ongoing monitoring and troubleshooting Arranging scheduled upgrades Investigating faults in the network Updating network equipment CISCO Arista Dell to the latest firmware releases Reporting network status to key stakeholders Benefits/perks listed below may vary depending on the nature of your employment with LTIMindtree (“LTIM”): Benefits and Perks: Comprehensive Medical Plan Covering Medical, Dental, Vision Short Term and Long-Term Disability Coverage 401(k) Plan with Company match Life Insurance Vacation Time, Sick Leave, Paid Holidays Paid Paternity and Maternity Leave The range displayed on each job posting reflects the minimum and maximum salary target for the position across all US locations. Within the range, individual pay is determined by work location and job level and additional factors including job-related skills, experience, and relevant education or training. Depending on the position offered, other forms of compensation may be provided as part of overall compensation like an annual performance-based bonus, sales incentive pay and other forms of bonus or variable compensation. Disclaimer: The compensation and benefits information provided herein is accurate as of the date of this posting. LTIMindtree is an equal opportunity employer that is committed to diversity in the workplace. Our employment decisions are made without regard to race, color, creed, religion, sex (including pregnancy, childbirth or related medical conditions), gender identity or expression, national origin, ancestry, age, family-care status, veteran status, marital status, civil union status, domestic partnership status, military service, handicap or disability or history of handicap or disability, genetic information, atypical hereditary cellular or blood trait, union affiliation, affectional or sexual orientation or preference, or any other characteristic protected by applicable federal, state, or local law, except where such considerations are bona fide occupational qualifications permitted by law.

Hi, This is Yusuf working as a Sr. Recruiter at K-Tek Resourcing, I have an excellent job opportunity for you mentioned below, Please let me know if you want to apply for the given role. You can reach out to me directly on ************. Job Title: Warehouse Engineer Job Location: Houston, TX (Onsite) Job Duration: Contract/C2C/W2 Visa: Open Positions: We anticipate the need for two additional Warehouse Engineer resources. These positions will be in addition to our existing two Warehouse Engineers. The JD for these new positions is also attached. Additional Information: All positions require the candidate to be located in Houston, TX. The positions require travel to a warehouse located near Bush Airport, Houston, for all five workdays. Job Description for Warehouse Engineer: We are seeking a highly motivated and energetic individual to join our team as an Entry-Level Warehouse Engineer. The ideal candidate is a recent college graduate with a strong desire to learn and grow. Responsibilities: Maintain a positive and collaborative work environment within the team. Contribute actively to ongoing team projects and initiatives. Demonstrate a strong aptitude for learning new technical skills, specifically in networking. Develop expertise in network device configuration and support. Conduct regular inventory of network devices, preparing them for warehousing and subsequent shipment to designated sites. Assist with general warehouse operations, including lifting and moving equipment Thanks and Have a Great Day!!

Kelly is hiring a Senior Electrical Engineer for one of our construction clients in Austin or Houston, TX Travel Expectations: 25% Can work in Austin or Houston The ideal candidate will possess a comprehensive blend of advanced technical expertise, project leadership, and strong business acumen. At the core, this role requires expert knowledge of electrical engineering concepts, practices, and codes-specifically ANSI and IEEE standards-to lead complex design projects from the initial concept through to completion. This includes the ability to develop innovative, non-standard design solutions and a proven track record of leading teams, mentoring junior engineers, and managing project scope, schedules, and budgets effectively. Furthermore, the Senior Electrical Engineer must have demonstrated experience in business development, including building client relationships, identifying new pursuits, and leading the creation of cost proposals to meet financial performance goals. Strong communication, critical thinking, and problem-solving skills are essential to coordinate with diverse engineering disciplines, resolve design-related issues, and ensure customer satisfaction. Qualifications Expert knowledge of standard engineering techniques and procedures, with strong proficiency in ANSI and IEEE standards for electrical equipment design. Proven experience leading the electrical design for large projects, including electrical substations from 12kV to 500kV. This includes delegating tasks, managing project scope, budget, and schedule, and resolving team issues. Demonstrated ability to build client relationships, participate in sales and marketing, and lead the development of cost proposals and qualification statements. Experience providing leadership, guidance, and instruction to less experienced engineers. Education Masters Degree in electrical engineering is preferred, however Bachelor's degree is required or related degree from an accredited program. 7 years of Electrical Engineering experience required, preferred experience in high voltage substation design. EPC project experience preferred Preferred Certs PE, PMP

The HT Group is currently hiring a Electrical Engineer to support a Healthcare Construction project in Forth Worth, TX. This role is for a mid-to-senior-level electrical engineer supporting complex construction projects, including healthcare facilities. Responsibilities include electrical systems analysis, estimating, quality review, coordination during bidding, field inspections, commissioning, and development of project-specific engineering solutions. The role supports project strategy, quality, and safety standards while contributing to continuous improvement. Location: Fort Worth, TX (DFW area for future assignments) Employment: Full-time salary + benefits Required Skills & Experience: 8+ years of construction and/or engineering experience (preferred) Bachelor's degree in mechanical, electrical, architectural engineering, or related field (required) Commercial HVAC experience on large projects (required) PE license (plus) Healthcare project background (plus) Strong ability to read plans, perform technical analysis, and work collaboratively Proficiency with MS Office and construction-related engineering tools Key Responsibilities: Participate in and support a strong safety and quality culture. Perform mechanical, electrical, and field construction tasks of increasing complexity. Develop budgetary M/E estimates based on schematic and program-level design. Review system options, conduct systems analysis, and provide value-engineering recommendations. Develop scopes of work and support coordination during the bidding process. Assist in bid analysis and subcontractor selection. Define system sequencing requirements and provide schedule-related input. Review design documents to identify quality issues; assist with constructability reviews and quality control programs. Conduct site inspections to verify compliance with specifications and schedules. Support and eventually lead the submittal and shop-drawing review process. Develop commissioning plans, pre-functional checklists, testing procedures, and verify functional testing. Ensure deficiencies are corrected and submit commissioning documentation. Mentor junior team members and contribute to process innovation and engineering tools.

Industry: Commercial, Industrial, Healthcare, and Data Centers About the Role We are seeking an experienced Preconstruction Manager to lead the planning and estimating phase of large-scale electrical projects across commercial, industrial, hospital, and data center environments. This role is critical in setting projects up for success by ensuring accurate budgets, schedules, and constructability reviews before breaking ground. Key Responsibilities Oversee all preconstruction activities, including budgeting, scheduling, and risk analysis. Collaborate with clients, design teams, and internal stakeholders to develop project strategies. Prepare detailed cost estimates and value engineering options. Review drawings and specifications for accuracy and constructability. Manage procurement planning and early vendor engagement. Provide leadership and guidance to estimating teams and junior staff. Ensure compliance with codes, standards, and company best practices. Requirements Experience: Minimum 7+ years in electrical construction, with at least 3 years in preconstruction or estimating leadership roles. Strong knowledge of NEC, local codes, and electrical systems for commercial and industrial projects. Proven ability to manage budgets and schedules for multi-million-dollar projects. Excellent communication, negotiation, and organizational skills. Proficiency in estimating software and project management tools. Ability to travel occasionally for client meetings and project kick-offs. What We Offer Competitive salary and performance-based incentives. Comprehensive benefits package (health, dental, vision, retirement). Opportunity to influence project success from the earliest stages. Work on high-profile projects in critical infrastructure sectors. Ready to shape the future of major electrical projects? Apply today and join a team that values precision, innovation, and leadership.

Delta Construction Partners is a national executive search firm for the nation's premier electrical and general contractors and industry professionals. Delta has been retained by a confidential client to conduct a search for an Electrical Engineer in Burlington, TX. Electrical Engineer Compensation & Benefits: Competitive base salary Bonus opportunities Medical, dental, vision, life, and disability insurance Paid time off + paid holidays Tuition reimbursement + continuing education support 401K retirement plan with employer match Paid maternity leave Military Reserve pay offset Electrical Engineer Key Responsibilities Maintain technical documentation, maintenance logs, and recurring system reports Support installation, configuration, and testing of integrated network systems in alignment with design packages Assist with staging, commissioning, and troubleshooting during project execution Stay current on advancing technologies and product capabilities through weekly industry research Collaborate with System Engineers to ensure solutions meet operational and performance requirements Partner with the Design team to resolve technical issues and improve design accuracy Recommend workflow enhancements that reduce cost and improve efficiency for future deployments Provide ongoing operational support for high-performance computing environments Monitor system utilization and performance metrics with guidance from senior engineers Develop user-friendly documentation, operating procedures, and interface guidelines for end-users Produce material lists and support procurement for system implementation Electrical Engineer Qualifications Bachelor's Degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, Computer Science, Computer Engineering, Math or Physics preferably from an ABET accredited program 2-7+ years experience supporting technical programs of similar scope and complexity Electrical Engineer Desired Skills & Expertise Strong communication skills across multidisciplinary engineering groups Ability to manage timelines and maintain quality standards under shifting priorities Experience with MS Office Suite (Excel, PowerPoint, Word) Analytical mindset with a proactive and hands-on approach to problem solving Electrical Engineer Work Environment & Physical Expectations Regular computer usage and prolonged seated work Ability to manipulate tools, devices, and keyboards Clear verbal and written communication skills required Ability to analyze technical information and apply engineering principles to solution development Active listening and collaboration across all project levels

🚧 Construction Field Engineer - Job Opportunity We're looking for a highly motivated Construction Field Engineer to join our team and support field operations on key infrastructure and building projects. If you're passionate about solving problems on-site, coordinating with multidisciplinary teams, and ensuring top-quality project execution, we'd love to hear from you! 🔧 Key Responsibilities Assist in day-to-day field operations, ensuring work is performed according to plans, specifications, and safety standards. Conduct site inspections, track progress, and prepare field reports. Interpret technical drawings and provide guidance to site crews and subcontractors. Coordinate materials, equipment, and work schedules to maintain efficient construction workflows. Support quality control and verification of completed work. Identify and troubleshoot on-site issues, proposing cost-effective solutions. Maintain accurate documentation, including RFI logs, as-built records, and field changes. Collaborate with project managers, site supervisors, and engineers to ensure timely project delivery. 🎓 Qualifications Bachelor's degree in Civil Engineering, Construction Management, or related field (or equivalent experience). 1-3 years of construction or field engineering experience preferred. Strong understanding of construction methods, materials, and safety practices. Proficiency with project management and design software (AutoCAD, Bluebeam, MS Project, etc.). Excellent communication, problem-solving, and organizational skills. 💼 What We Offer Opportunity to work on impactful projects with an experienced team. Competitive salary and benefits package. Career growth pathways and ongoing professional development.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As an Electrical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Electrical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Electrical Engineering co-ops and interns enter into the following positions: Electrical & Instrumentation (E&I) Project Engineers work on a variety of real-world electrical and instrumentation projects in a refinery setting. During your time at MPC, you will develop and utilize project management skills including scope alignment, cost and schedule development, and teamwork through multiple engineering phases. You will also support the area teams. We are committed to developing engineers into professional project managers who successfully manage projects of all sizes. Reliability Electrical & Instrumentation (E&I) Engineers troubleshoot Electrical & Instrumentation issues at the refinery. As a reliability intern, you will help analyze failures of equipment, develop solutions for recurring equipment difficulties, submit Project Request Forms (PRF's) to implement solutions, and understand equipment maintenance strategies. There will be opportunities to use electrical analysis software to solve coordination issues and run Arc Flash studies for the power system, as well as learning and understanding about how our critical Refinery Safety Instrumented Systems (SIS) are applied. Process Control / Technical Service Engineers can work on a wide array of projects in support of the process control systems installed throughout the refinery and products movements areas. The process control systems in the refinery provide real-time control and data acquisition functions in support of operating the refinery process and electrical equipment. Typical college co-op assignments include the following: troubleshooting system power supply problems, control system programming, hardware and software lifecycle replacement projects, installing and troubleshooting communication networks and monitoring control system performance metrics. Qualifications: + Candidates must be majoring in Electrical Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.31 per hour / MAX - $40.89 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018187 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez, California, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

About GlobalFoundries GlobalFoundries (GF) is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world's most inspired technology companies. With a global manufacturing footprint spanning three continents, GF makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit *********** Internship Program Overview: Our Interns & Co-ops are our entry-level talent pipeline for GF across the globe. Our goal is to provide students with a meaningful work experience that will equip them with the skills to embark on a career in the fast-paced and growing semiconductor industry after graduation. As an intern at GF, you'll experience one-on-one mentorship, work assignments that prioritize your growth and potential, professional development opportunities, and the chance to network with executives. Summary of Role: This internship is a project-based role with routine tasks. The project assignment for this role may be focused on understanding GF technologies and doing competitive analysis. This internship position will be based out of and support our Austin, TX location. Essential Responsibilities include: * Understand key GF technology offerings * Review Key Customers product portfolios and Engage with Subject Matter Experts to prepare analysis on where GF technologies are a good fit * Review customer's and competition's press releases, earning calls and financial statements and present competitive analysis. * Read market reports and Perform market analysis * Assist team in daily business processes and long-range planning * Communicate clear status and target dates for key milestones / task activities * Support Account Manager in collaborating on business initiatives, analysis and demands with client facing needs. * Participate in a variety of internal stakeholder meetings, including business reviews, sales meetings, strategy meetings, and supply meetings. Other Responsibilities: * Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs. Required Qualifications: * Education - Junior at time of application and actively pursuing a bachelor's degree in electrical engineering through an accredited degree program during the time of internship. * Must have at least an overall 3.0 GPA and be in good academic standing. * Language Fluency - English (Written & Verbal) * Ability to work at least 40 hours per week during the internship. Preferred Qualifications: * Prior related internship or co-op experience * Demonstrated prior leadership experience in the workplace, school projects, competitions, etc. * Project management skills, i.e., the ability to innovate and execute on solutions that matter; the ability to navigate ambiguity. * Strong written and verbal communication skills * Strong planning & organizational skills * Skills: Experience in Analog or Digital design, interest in sales strategy and competition is a plus * Demonstrated ability to perform advanced analytics, problem solve and conduct effective research #InternshipProgramUS Expected Salary Range $20.00 - $40.00 Expected Salary Range $0.00 - $0.00 The exact Salary will be determined based on qualifications, experience and location. If you need a reasonable accommodation for any part of the employment process, please contact us by email at usaccommodations@gf.com and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. An offer with GlobalFoundries is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations. GlobalFoundries is fully committed to equal opportunity in the workplace and believes that cultural diversity within the company enhances its business potential. GlobalFoundries goal of excellence in business necessitates the attraction and retention of highly qualified people. Artificial barriers and stereotypic biases detract from this objective and may be illegally discriminatory. All policies and processes which pertain to employees including recruitment, selection, training, utilization, promotion, compensation, benefits, extracurricular programs, and termination are created and implemented without regard to age, ethnicity, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, sexual orientation, gender identity or expression, veteran status, or any other characteristic or category specified by local, state or federal law

At DuPont, our purpose is to empower the world with essential innovations to thrive. We work on things that matter. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world. Discover the many reasons the world's most talented people are choosing to work at DuPont. Why Join Us | DuPont Careers (******************************************* At **DuPont** , our paid internship and co-op opportunities are designed to give students more than just a glimpse into the professional world-they're a launchpad for your future. You'll work on real, impactful projects alongside experienced DuPont professionals, applying what you've learned in the classroom to solve real-world challenges. Through this hands-on experience, you'll build essential skills, grow your network, and gain exposure to a collaborative, inclusive workplace that values innovation and leadership. You will have the opportunity to collaborate across teams and functions, gaining exposure to innovative technologies and diverse perspectives that drive real-world solutions. **As an Engineering intern or co-op, you'll:** + Embrace DuPont's core values in safety, sustainability, and innovation + Gain industrial experience and insight into our businesses, products, and customers + Work in team-based environments with mentorship and technical training + Participate in professional development opportunities tailored to your role Our student program offers both internships and co-op assignments tailored to fit your academic schedule and career goals. Assignment length and scope may vary by site and function, but every experience is designed to help you grow, contribute, and lead. Typical roles in manufacturing, operations, and business at DuPont span a wide range of exciting and impactful areas, including Manufacturing Technical and Process Engineering, Capital Projects, Automation and Process Control, Leveraged Engineering, Equipment Reliability and Maintenance, Continuous Improvement, Product Quality, and Technical Service. Summer interns and co-ops must be available from May - August. **Requirements** To be considered, the following requirements must be met: + Enrolled as a full-time student pursuing a Bachelor's or Master's degree in Chemical, Mechanical, Electrical or other engineering disciplines from an ABET accredited program + GPA of 3.0 or higher (out of 4.0 scale) + Legal right to work in the U.S. without restriction Join our Talent Community (**************************************************** to stay connected with us! DuPont is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information (****************************************************** . DuPont offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page (********************************************************** . The Pay range for this role is $16.10 - $25.30 Hourly **How Base Pay is Determined:** DuPont has job leveling frameworks that help organize roles based on progressive levels of responsibility, proficiency and qualifications. Each role has an associated pay range (or an established pay rate for some roles) based on the competitive market in each country where we operate. Each individual's pay is based on a variety of factors, including their role and the associated pay range for that role, their geographic location (i.e., country, state, metropolitan area), as well as their skills, experience, education and certifications, and performance.

Candidates must be pursuing a degree in Electrical Engineering. Sophomore-level students are eligible, with preference given to juniors. The Electrical Engineering Intern will work alongside an Experienced Electrical and Instrumentation Engineer in the Engineering and Technical Support department to support the project team in the design, construction, and commissioning of gas compressor stations and liquid pump station facilities. This position provides the intern with hands-on I&E field experience across facilities in the oil and gas midstream industry while supporting project efforts for commercial growth initiatives. Primary Responsibilities * Assist the Project Lead Electrical and Instrumentation Engineers with the design and installation of electrical and automation systems, motors, protective devices, instrumentation, and other electrical equipment used in pipeline and facility operations. The following is a summary of possible activities: * Controls System hardware support * Station Control system and network architecture * Assist in reviewing low-voltage cable and conduit schedules * Assist Low-voltage integration with Rotating Equipment * 3rd party vendor supplied skids integration support * Instrumentation support * P&ID review * Validating instrument index * Developing setpoints and operations * Integration/Programming support * Assist Functional Specification & ESD specification review * Assist Cause and Effect review * Assist on FAT/CAT validation * Integrating 3rd party skid, measurement, and remote communications * Commissioning support * Help review engineering drawings, vendor specifications, and electrical equipment documentation. * Support engineers in preparing and reviewing technical standards, specifications, and procedures. * Assist with project documentation, data collection, and coordination between engineering disciplines. * Gain exposure to industry standards, company engineering practices, and applicable regulations. * Contribute ideas and assist with troubleshooting or recommending improvements to ongoing projects. Qualifications * Currently pursuing a Bachelor's degree in Electrical Engineering or a related field. * Minimum sophomore standing by the start of the internship. * Strong analytical, problem-solving, and organizational skills. * Basic understanding of electrical systems, circuits, and power distribution (coursework or lab experience preferred). * Proficiency in Microsoft Office and basic familiarity with AutoCAD or similar tools is a plus. * Excellent communication and teamwork skills. * Interest in the energy or pipeline industry is strongly preferred.

**Change the world. Love your job.** As an Intern at TI, you will be assigned meaningful projects related to your educational background that are challenging, rewarding and beneficial to the Facilities organization. The projects focus on cost and energy reduction, plant and process safety improvements, reliability improvement and problem solving. You will be integrated into the team and supported by engineers, technicians, operators and the leadership team as you work through their projects. As an Intern at TI, you will also have opportunities to network with other interns through social events, volunteering and professional development sessions. Put your talent to work with us as a Manufacturing Facilities Engineering Intern - change the world, love your job! **About the Job** Facilities Electrical Engineering interns will have the opportunity to work on industrial electrical systems used to transmit, distribute and generate electric power. They will gain hands-on experience by working with electrical equipment like substations, panels, motors and motor drives, protection systems, monitoring systems and more. These systems are crucial in supporting semiconductor manufacturing operations. To learn more about this job, please watch our day-in-the-life video: Gain valuable industry experience and jumpstart your career with Texas Instruments! Note: TI does not sponsor visas for this position. **Why TI?** + Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics. + We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI (*************************************** UI/CandidateExperience/en/sites/CX/pages/4012) + Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. **About Texas Instruments** Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, personal electronics, communications equipment and enterprise systems. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com . Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, disability, genetic information, national origin, gender, gender identity and expression, age, sexual orientation, marital status, veteran status, or any other characteristic protected by federal, state, or local laws. If you are interested in this position, please apply to this requisition. **Minimum Requirements** + Currently pursuing a bachelors or master's degree in Electrical Engineering + Minimum Cumulative 3.0/4.0 GPA **Preferred Qualifications:** + Demonstrated analytical and problem-solving skills + Strong verbal and written communication skills + Ability to work in teams and collaborate effectively with people in different functions + Strong time management skills that enable on-time project delivery + Ability to build strong, influential relationships + Ability to work effectively in a fast-paced and rapidly changing environment + Ability to take the initiative and drive for results **ECL/GTC Required:** Yes

Knauf Insulation North America is the world's fastest-growing insulation manufacturer. We are wholly committed to the conservation of the environment while also sustainably developing and manufacturing a comprehensive line of acoustical fiberglass insulation for residential, commercial, industrial, marine, OEM and metal building applications, using post-consumer recycled materials. We welcome passionate and creative individuals who thrive in an entrepreneurial, collaborative and ever-changing environment. We know how important your health, wellbeing, and financial strength is to you. To support you, we provide affordable benefits for you and your family members. "Supporting all aspects of the individual - self, health, wealth and community" Our benefits include: * Medical, Dental, Vision - starting on day one! * Virtual Medical Services * 401(k) Retirement Plan (earn 100% matching on your first 6% and fully vested day one) * Paid parental leave * Company paid life insurance * Tuition Reimbursement * Employee Assistance Program (EAP) * Plus, more! Growth opportunities available! Apply online or contact us to hear why our employees appreciate being part of the Knauf family! About the Role: As our Electrical Project Engineer, you'll lead controls and automation projects from concept to commissioning-optimizing machine performance, reducing process variation, and standardizing data across the plant. You'll design and program PLCs/HMIs/drives/servos (Rockwell/Allen‑Bradley), set network and server architecture, manage contractors, and collaborate across departments to deliver measurable results. Responsibilities * Own end-to-end projects: scope, design, program, test, commission, and hand off to operations * Design and program PLCs, HMIs, drives, and servos (Rockwell/Allen‑Bradley required) * Architect and configure industrial networks and servers that power reliable controls/SCADA * Coordinate with Maintenance, Process, and Production to ensure consistent data collection, analysis, and action * Build standardized reporting to evaluate process control systems and minimize variation * Create and enforce SCADA tag naming standards for clean, reusable data * Write clear technical/contract documents: PWS, SOW, RFPs, purchase requests, contract modifications, technical evaluations, and QA surveillance plans * Provide guidance to controls engineers to maintain standardization across lines and equipment * Train technicians, operators, and engineers on new or improved processes and HMIs * Stay current through workshops, publications, and professional networks; serve as a technical resource site‑wide * Manage contractor/vendor relationships to ensure safe, on-time, on-budget project execution * Drives the highest levels of employee retention and engagement to ensure a sustainable workforce. * Fosters a culture of innovation, collaboration, and accountability within the organization. * Instills an environment of inclusion, where all employees feel that they can contribute and impact the company in a positive manner. Qualifications Education: * Bachelor's Degree in Electrical Engineering Experience: * Minimum of five (5) years' Electrical Engineering experience in an industrial manufacturing and corporate environment * Experience writing Knowledge, Skills and Abilities: * Hands-on expertise with PLC/HMI design and maintenance; Rockwell (Allen‑Bradley) is a must * Strong background in network configuration/architecture and computer/server setup * Proficiency with SQL and OSI PI historians for analytics and reporting * Proficiency with Visual Studio (VB, C#, MVC) and web development (Angular) * Clear communicator with strong documentation and presentation skills; able to partner across departments * Strength in problem solving, troubleshooting, critical thinking, time management, and project management * Comfortable working independently, prioritizing multiple projects, and making timely, sound decisions * Nice to have: knowledge of production/processing techniques; insulation manufacturing experience How you'll make an impact: * Improve safety, quality, uptime, and yield through robust controls and data standards * Reduce variability with standardized reporting and SCADA tag governance * Accelerate project delivery by setting clear technical standards and documentation * Uplift the team through training and consistent engineering practices It is the policy of Knauf Insulation to provide equal employment opportunities to all qualified persons without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status or any other protected characteristic prohibited by applicable law.

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start **May 2026** **and go through Summer 2026. Dates are flexible with school calendar** . Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. **Job Description:** This position provides a unique opportunity for hands-on training in electrical design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team and independently. Our engineers will teach the student co-op how we design and implement electrical systems/infrastructure as well as energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. **Job Functions: (may include but are not limited to)** + Learn and implement the electrical system basics such as power, power distribution, lighting & controls, fire alarm systems for new constructions and renovation design projects while supporting our engineering team. + Produce detailed layout and equipment details of electrical systems of buildings, + Produce one-line diagrams/schematics, + Assist the design team in the process of assembling organized sets of drawings, + May assist in the data collection and/or field verification, and + Work in conjunction with designers and engineers to help develop all aspects of a project. **Requirements:** + Pursuing a bachelor's degree in Electrical Engineering or Architectural Engineering, preferably a sophomore (2nd year) or a junior (3rd year), + Strong interest in Building Systems Electrical Engineering, + AutoCAD and REVIT experience preferred, + Strong interpersonal and communication skills, + Proficiency with Microsoft Word and Excel, + Ability to work both independently and with a team, + Ability to work full time throughout the co-op term, + Ability to travel locally for job site inspections, field work, etc. We are unable to provide immigration sponsorship for this position. \#LI-RH1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies. Perform as a lead on more complex field engineering assignments. Interact with customers to explain the technical scope of projects. Create and update field service procedures for troubleshooting and maintenance. Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center. Coordinate with R&D engineering in China for the generation of technical documents and training. Responsible for the technical issues of a certain region based on the job assignment. Lead the preparation of root cause reports to the customer. Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues. Analyze failures for trends requiring proactive actions and provide reports on findings. Provide feedback to the R&D team on possible mechanical and electrical design improvements. Advise, provide training on, and lead employees on various safety-related topics. Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed. Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients. Work with customer SCADA engineers to set up systems communication and parameters. Research alternative components that can be used in the field. Independently performs a range of field service tasks involving communication with Factory Engineering and Customer's solar plant engineer. Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants. Help with the repair activities in the Service center. Prepare and submit field reports to customers and management. Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work. Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations. Inspects working conditions to ensure all products and activities are compliant with safety guidelines. Weekly call with Engineers from Headquarters to review the progress of the issues resolution process. Provide details for a monthly report. Minimum Requirements: Must possess the ability to work with test equipment and hand tools as required. Must possess customer service, problem-solving skills, and possess decision making and analytical skills. Must possess effective written and verbal communication skills. Demonstrates broad knowledge of electrical and construction site safety. Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook) Must have basic knowledge of Electrical Safety Standards Education or Desired License and Certificates: 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors. Solar industry, battery industry, or power electronics experience is preferred. Competencies: Technical problem solving/analytical skills. Self-starter, strong initiatives, and an excellent communicator. System and product level mindset. Organization, detailed-oriented nature, and strong initiative. Strong technical support focus and a service-oriented individual both with sales team and customers. Modbus protocol knowledge is desired, but not required. English language proficiency required. Mandarin Chinese Proficiency desired, but not required. Travel: 50% Work Location and Status: Contract-to-Hire, Hybrid role based out of the Dallas/Waco/Tyler, TX area Compensation: Compensation commensurate with experience Competitive benefits package and employee programs Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Summary/Objective A member of the technical staff, the Electrical Design Engineer is responsible for the design of new transformers up to full production. This includes specification reviews, , design reviews, mechanical designs, customer submittal packages, pre-production builds and transfers to production. The Electrical Design Engineer is also responsible for technical support of in-production transformers throughout the manufacturing process. Essential Functions • Daily On-Site Attendance. • Performs various engineering tasks involving design, development, preparation of electrical and mechanical drawings, technical support, and assistance in testing. • Designs liquid-filled distribution-type transformers through electrical and mechanical interpretation of purchase specifications. • Performs optimized calculations and computations to plan and implement specific transformer design procedures. • Analyzes and develops wire schematic diagrams. • Interacts with customers to resolve technical issues. • Creates test reports and leads witness testing. • Assists Sales & Marketing Team with transformer designs for quoting purposes. • Creates Bill of Materials in NetSuite. • Assists Supply Chain Management with the purchasing of transformer parts and materials. • Inspects the transformer throughout the manufacturing process and coordinates any necessary design revisions with the appropriate Manufacturing department. • Participates in project teams and all activities related to the development of new products. Competencies • Technical Capacity. • Problem Solving/Analysis. • Communication Proficiency. • Accountable to Objectives. • Customer/Client Focus. • Organizational Skills. • Detail-Oriented. • Proficiency with Microsoft Office products. • Proficiency with CAD Modelling software, ideally SolidWorks. • Proficiency with NetSuite. Supervisory Responsibility This position has no direct supervisory responsibilities. Environment/Physical Requirements The ideal candidate must be able to complete all physical requirements of the job with or without reasonable accommodation. • Prolonged periods of sitting at a desk and working on a computer. • Must be able to access and navigate each department in the Office and Factory Floor. Position Type and Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday, 8:00am to 5:00pm. However, depending on workload there may be occasional longer days and occasional weekends as needed. Employee is expected to work the hours necessary in order to timely and satisfactorily complete all necessary work tasks. Travel Regular travel is not required for this position. Education and Experience • Bachelor's degree in Electrical Engineering or equivalent required. • 0-5 years' experience in Design/Engineering. • Microsoft Office proficiency. • Strong verbal and written communication skills. • Knowledge of Solid works/CAD 3D/2D modeling experience preferred. • Knowledge of NetSuite preferred. • Strong academic background in Electrical Engineering (Power & Electromagnetics) preferred. • Strong mechanical aptitude preferred. Requirements Benefits 15 days of PTO on an annual basis 100% of Employee Premium on HMO Medical Plan, Dental, Vision, and Group Life paid for Voluntary Life Aflac Insurance-Accident, Critical Illness, Hospital, Short Term Disability, Cancer, Term Life, Whole Life 401(k): 4.5% employer match The Company has the discretion to alter or rescind the benefits listed above at any time in accordance with any applicable notice requirements under federal, state, or local law. Work Authorization/Security Clearance Required to be authorized to work lawfully in the US. AAP/EEO Statement VanTran Transformers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, age, national origin, disability, sexual orientation, protected veteran status, genetic information, and any other characteristic protected by local, state or federal antidiscrimination law covering employment. Other Duties Please note this is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time in the Company's sole discretion. At-Will Employment Your employment is at-will, which means that either you or the Company may terminate your employment at any time, for any or no reason, with or without cause or notice. Nothing in this serves to alter your at-will status, or should be deemed a promise of employment for any specified time period. Disclaimer This does not constitute a contract of employment, either express or implied. This job description is for informational purposes only. The Company has the discretion to alter the terms and conditions of employment, including the duties and responsibilities set forth herein, during the course of your employment in accordance with any appliable notice requirements under federal, state, or local law.

Electrical Engineer I - (Statewide) - (2503401) Position Information The TxDOT Support Services Division is seeking a driven and detail-oriented Electrical Engineer to join our team. In this role, you will take the lead on advanced electrical engineering projects supporting TxDOT buildings and infrastructure. From designing and reviewing electrical systems to collaborating with multidisciplinary teams, you'll play a key role in powering safe, efficient, and innovative solutions across the state. At TxDOT we value employee work-life-balance. In keeping with our commitment to this value our employees benefit from a wide array of programs and activities that include flexed and compressed work schedules, wellness leave incentive, in-house wellness center, career development programs, tuition assistance, and various other benefits. Work location: The selected candidate's work location may be Headquartered in Austin or any of the following 25 TxDOT District offices located in Abilene, Amarillo, Atlanta, Austin, Beaumont, Brownwood, Bryan, Corpus Christi, Childress, Dallas, El Paso, Fort Worth, Houston, Laredo, Lubbock, Lufkin, Odessa, Paris, Pharr, San Angelo, San Antonio, Tyler, Waco, Wichita Falls, and Yoakum. Minimum Salary: 85,000. 00 Maximum Salary: 125,000. 00 Pay Basis: Yearly FLSA Status: Exempt Work Locations: Stassney Hq - Main 6230 East Stassney Lane Austin 78744 Other Locations: UST-Texas-Austin, UST-Texas-San Antonio, UST-Texas-Laredo, UST-Texas-Atlanta, UST-Texas-Pharr, UST-Texas-Childress, UST-Texas-Yoakum, UST-Texas-Wichita Falls, UST-Texas-Mesquite, UST-Texas-Waco, UST-Texas-Paris, UST-Texas-Bryan, UST-Texas-Tyler, UST-Texas-El Paso, UST-Texas-Lubbock, UST-Texas-Corpus Christi, UST-Texas-Amarillo, UST-Texas-Abilene, UST-Texas-Odessa, UST-Texas-San Angelo, UST-Texas-Houston, UST-Texas-Brownwood, UST-Texas-Beaumont, UST-Texas-Lufkin, UST-Texas-Fort Worth Travel: Yes, 25 % of the Time Shift: Day Job Location Flexibility: Onsite Location Flexibility Details: This position may be housed at any of the 25 TxDOT District Headquarters statewide. Benefits and Perks At TxDOT, we value work-life balance and are committed to providing our employees with a comprehensive range of benefits and programs, including:Retirement PlansAlternative and/or Flexible Work SchedulesPaid Leave and HolidaysHealth Premiums paid at 100% for Full-Time EmployeesOn-the-Job TrainingTuition Assistance ProgramHolistic Wellness Program with Leave IncentivesCareer Development and Advancement OpportunitiesFamily-Friendly Policies and ProgramsIn 2024, TxDOT was recognized as a Best Place for Working Parents, and many of our offices statewide are also designated as Texas Mother-Friendly Worksites. These recognitions reflect our dedication to supporting families and promoting a healthy work-life balance. For a complete list of our total compensation package please visit our website at: Total Compensation PackageTo view benefits available to all State of Texas employees visit: Benefits at a Glance | ERS (texas. gov) Position Description Performs facilities engineering work related to buildings and site development, in one or more functional areas such as planning, project development and design, and construction administration. Ensures compliance with applicable federal and state laws, policies, procedures, standards, and guidelines. Work requires contact with governmental officials and private entities. Issues are rarely referred to the supervisor but are handled at the occurrence. Employees at this level follow standard practices that do not require frequent supervision of details. Essential Duties:- Drives/travels to project/work locations to make on-site engineering reviews, analyses, tests and to provide technical support. - Monitors consultants' progress and work quality; checks invoices and associated documents; prepares supplemental agreements. - Performs complex engineering design work such as development of layouts, sketches, plans, specifications, estimates and contracts. - Reviews, processes and certifies project design plans developed by consulting engineers. - Serves as a project manager overseeing consultants performing advanced and complex engineering work. - Prepares and seals engineering construction documents for bidding. - Reviews shop drawings, plans, specifications, estimates, supplemental agreements and change order requests relative to facility construction. -Utilize project management principals in initiating, planning, executing, monitoring, controlling and closing for complex mechanical and/or structural engineering projects related to facility construction. -Coordinates phases of preliminary design and revisions in PS&E with districts, divisions, Administration, contractors, fabricators, and local entities. -Performs other job responsibilities as assigned. Minimum Qualifications:Education: Bachelor's Degree in engineering or related science bachelor's or higher degree accepted by TX PELS. Experience: 4 years of experience in engineering, structural engineering, civil engineering, mechanical engineering, electrical engineering, or related engineering. (Experience can be satisfied by full time or prorated part time equivalent). Related graduate level education may be substituted for experience on a year per year basis. Substitutions for Minimum QualificationsLicenses and Certifications:Valid driver's license. This position requires driving a state vehicle. Licensed Prof Engineer Competencies:Considerable knowledge of:-Applicable plans, specifications and estimates preparation, review, processing and compliance requirements-Construction engineering policies and procedures-Design and plan preparation methods and requirements-Facility planning, design and site development-Applicable industry safety standards, guidelines, and specification codes Proficient skill in:- Performing basic design and drafting- Planning, coordinating and handling multiple projects within area of responsibility to meet short- and long-term deadlines- Using computers and applicable programs, applications, and systems- Maintaining a safe and effective working relationship with others Physical Requirements and Working Conditions:- Subject to inside and outside environmental conditions- Sedentary work: Lift up to 10 lbs at a time and occasionally carry files/small tools- Talking-expressing or exchanging ideas by spoken words- Hearing-perceive sound at normal speaking levels; receive information by oral communication- Close Visual Acuity-work includes data/figures; view a computer screen; extensive reading- Visual Acuity-determine work quality/make general observations of facilities/structures Conditions of Employment:Please click this link to read the standard conditions of employment for all positions: Standard Conditions of Employment (TxDOT) This job has been identified as physically demanding and will require a pre-employment physical. Must pass a drug test prior to employment for safety impact positions. This is a Safety Impact position and will be subject to random drug testing. Please note that the Department of Transportation's Drug and Alcohol Testing Regulation - 49 CFR Part 40, at 40. 151(e) - does not authorize “medical marijuana” under a state law to be a valid medical explanation for a positive drug test result for an employee in this position. Job: Engineering/Engr Support Schedule: Full-time Employee Status: Regular Job Type: Standard Job Level: Non-Management Job Posting: Dec 11, 2025, 4:05:06 PM Unposting Date: Dec 26, 2025, 5:59:00 AM State Job Title/s: Engineer IV State Job Code/s: 2155 Military Occupational Specialty (MOS) TxDOT is committed to hiring veterans. To assist in determining whether your military experience may pertain to the minimum requirements for this position, Military Occupational Specialty (MOS) codes from each branch of the U. S. Armed Forces have been assigned to each state classification code/title where applicable. The MOS codes are grouped by occupational category. Click on the appropriate occupational category to view the MOS codes. Applicant Information The Texas Department of Transportation is an Equal Opportunity Employer. If requested, reasonable accommodations will be made for persons with disabilities for any part of the employment process in accordance with the Americans with Disabilities Action of 1990. Additional Applicant Information for applicants