Electrical engineer jobs in Kingsport, TN

PHYSICAL OFFICE LOCATION: PEC Headquarters - 201 S Ave F, Johnson City or Leander, TX 78636 Hybrid Work Options Available; This position may report in to either our Johnson City Headquarter or at our Cedar Park facility depending on home location. Travel between the two locations will periodically be required. $115,473.60 Minimum Starting Base Pay* + KPI Bonuses + Competitive Benefits Range of Substation Engineer 4: $115,473.60 - $144,342.00 mid point. *Qualifications may warrant greater starting base pay within the full pay range. Individual base pay is determined by experience, job-related skills, and relevant education or training. Position Summary This position is responsible for the design and construction of complex electrical power systems and the analysis of the Cooperative's protection systems in support of the Cooperative's Strategic Initiatives. Essential Duties & Responsibilities Compile and evaluate design and test data Operate computer assisted engineering and design software and equipment to perform engineering tasks and analysis Prepare technical specifications and analyze technical data to determine appropriate limits and variables for product, process or materials specifications Prepare and study technical drawings, test reports and specifications of substation design and operation in order to conform to standards and customer requirements Confer with engineers, customers and others to discuss existing or potential engineering projects and products Direct and coordinate manufacturing, construction, installation, maintenance, support, documentation and project management activities to ensure compliance with specifications, codes and customer requirements Design, implement, maintain and improve electrical instruments, equipment, facilities, components, products and systems for commercial, industrial and domestic purposes Prepare specifications for purchase of materials and equipment Perform detailed calculations to compute and establish manufacturing, construction and installation standards and specifications Investigate customer or public complaints, determine nature and extent of problem and recommend remedial measures . Oversee project production efforts to assure projects are completed satisfactorily, on time and within budget Manage the design and construction of large substation projects with minimal supervision Represent the Coop in regulatory compliance efforts as a Subject Matter Expert Perform a variety of standard engineering computations and analysis Prepare engineering drawings, maps, and construction specifications Research material specifications and resolve basic material issues Conduct construction inspections Coordinate with consultants, members, developers and government entities on all projects Provide guidance to other department engineers and staff Write conceptual design documents for substation projects as assigned Use sound engineering judgement to make decisions regarding changes to project scope Assist with ordering major equipment and review approval drawings for long lead time material Serve as a department and project leader Perform fault studies and set relays for transformers, feeders and transmission lines Complete assigned tasks Maintain the security of confidential information Stay abreast of advances in technology Demonstrate regular and prompt attendance Performs other related duties as necessary or assigned .. ... ... ... ... Supervisory and/or Leadership Responsibilities Provides leadership, coaching, and/or mentoring to less experienced staff. May act as lead or first-level supervisor when manager is out of the office. Knowledge, Skills & Abilities Knowledge of using computer systems, which may include setting up and using hardware and software programs such as AutoCAD and ASPEN, entering data or processing information Knowledge of principles and processes for providing customer service Knowledge of Power System materials Knowledge of NERC PRC standards Proficient in all matters of substation design and construction Proficient in reading and understanding schematics and design drawings Skilled in time management Skilled in prioritizing and managing changing priorities Ability to communicate effectively verbally and in writing Ability to listen and understand information verbally and in writing Ability to anticipate, identify, analyze and resolve conflict and problems ... .... Minimum Qualifications - (Education, Experience) Bachelor's degree in a related engineering field Registered Professional Engineer in the State of Texas Eight years of related work experience Valid Driver's License Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. The employee may be required to stand; reach with hands and arms, stoop and kneel The employee may be required to sit or stand for long periods of time The employee may be required to lift, carry, push, pull or move up to 25 pounds The employee may be required to travel Exempt employees receive a fixed bi-weekly salary to compensate them for all hours worked during each pay period This position may be required to work more than 40 hours per week This description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of essential duties and responsibilities shall not be held to exclude other duties that may be assigned based on the needs of the Cooperative. Position Open Until Filled Pedernales Electric Cooperative is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, gender identity, sexual orientation, disability, protected Veteran status, age, or any other characteristic protected by law.

Founded in 1920, Eastman is a global specialty materials company that produces a broad range of products found in items people use every day. With the purpose of enhancing the quality of life in a material way, Eastman works with customers to deliver innovative products and solutions while maintaining a commitment to safety and sustainability. The company's innovation-driven growth model takes advantage of world-class technology platforms, deep customer engagement, and differentiated application development to grow its leading positions in attractive end markets such as transportation, building and construction, and consumables. As a globally inclusive company, Eastman employs approximately 14,000 people around the world and serves customers in more than 100 countries. The company had 2024 revenue of approximately $9.4 billion and is headquartered in Kingsport, Tennessee, USA. For more information, visit **************** Responsibilities We are seeking a highly skilled, experienced and results-oriented Electrical Design Engineer with a focus on power systems and design for capital projects to join our Eastman Corporate Engineering team. This position will work with both local and remote design teams to lead the execution of Electrical Engineering scope of work. As the Electrical Design Engineer, you will be responsible for overseeing and executing the Electrical Engineering scope for various large capital projects during Pre-FEED, FEED, and Detail Design phases to ensure their successful completion. Your expertise in Electrical engineering principles and practices, combined with your extensive experience in the chemical industry, will be crucial in leading a project team of engineers and designers and driving innovation in our organization. Location: Kingsport, TN • Develop and implement project-specific Electrical Engineering execution plan to ensure efficient and effective project execution • Collaborate with cross-functional teams and stakeholders, including all engineering disciplines, project managers, Operations and procurement, to ensure seamless project integration and successful project delivery • Lead and manage the execution of Electrical Engineering scope of work at the selected engineering service provider in all phases (Pre-FEED, FEED and Detail Design) • Monitor and report actual progress and forecasting/check for discipline activities, including management of labor hours and delivered documents • Lead the design and selection of electrical equipment considering factors such as safety, reliability, maintainability, cost and schedule • Prepare and review engineering drawings, specifications and technical documents, ensuring compliance with industry standards, codes and regulations • Apply industry codes and standards relevant to the chemical industry, such as NFPA 70, NEC, IEEE, and other applicable codes, in the design and evaluation of electrical systems and equipment • Oversee the procurement of electrical equipment, ensuring adherence to project requirements and specifications • Conduct thorough reviews and quality control checks to ensure compliance with design specifications and project requirements • Utilize software tools and applications, such as SKM, Bluebeam, Navisworks, AVEVA Engineering or equivalent and other engineering design software, to support electrical engineering activities and enhance project efficiency Qualifications • Bachelor's degree in Electrical Engineering required; Advanced degree is a plus • 7+ years of experience in Electrical Engineering field. A focus on the chemical or petrochemical industry is preferred • Technical design knowledge about a broad range of equipment (motors, motor control centers, lighting, VFDs, UPSs, etc.) and electrical systems (wiring/cabling, grounding, breakers, power supplies, fuses, junction boxes, etc.) • Experience as a lead Electrical Engineer, including experience in large capital projects execution, is a plus • Strong leadership and interpersonal skills for implementation of cross-functional process improvements • Ability to mentor and develop lesser experienced team members • Proven experience in leading a team of engineers, with excellent leadership and communication skills • Familiarity with capital stage gate process and understanding of project execution • Excellent organizational skills and the ability to prioritize and manage multiple projects simultaneously • Knowledge of safety regulations and standards related to Electrical Engineering in the chemical industry • Professional Engineer (PE) license is a strong plus • Open to travel as needed Eastman Chemical Company is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, pregnancy, veteran status or any other protected classes as designated by law. Eastman is committed to creating a highly engaged workforce, where everyone can contribute to their fullest potential each day.

In a world of possibilities, pursue one with endless opportunities. Imagine Next!At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Parsons is looking for an amazingly talented Senior Electrical Engineer to join our Kingsport, TN team! In this role you will get to be a part of a team designing facilities of the future. What You'll Be Doing: Designing electrical and communication systems Designing lightning protection systems Perform all required design calculations including lighting, load and arc-flash/short-circuit analysis Coordinating between disciplines Perform site visits to gather design data Work with a team of electrical engineers and designers Provide senior-level leadership to mentor junior level engineers Pursue licensure in other states to support department and company growth What Required Skills You'll Bring: Professional engineer license is required (or current FE working towards PE). Bachelors degree in electrical engineering. 8+ years experience. Experience with design of building electrical and telecommunication systems What Desired Skills You'll Bring: CAD/Revit experience is a plus SKM/ETAP experience is a plus Advanced degree is a plus RCDD certification is a plus Security Clearance Requirement: NoneThis position is part of our Federal Solutions team.The Federal Solutions segment delivers resources to our US government customers that ensure the success of missions around the globe. Our intelligent employees drive the state of the art as they provide services and solutions in the areas of defense, security, intelligence, infrastructure, and environmental. We promote a culture of excellence and close-knit teams that take pride in delivering, protecting, and sustaining our nation's most critical assets, from Earth to cyberspace. Throughout the company, our people are anticipating what's next to deliver the solutions our customers need now.Salary Range: $86,700.00 - $151,700.00We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle!Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status.We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to ************************************************

**Who We Are** Hargrove supplies unparalleled services in engineering, procurement, construction management, and technical services in the industrial, commercial, and government sectors. With over 2,700 Teammates in 19 offices domestically and internationally, we build long-term support relationships in the energy generation, manufacturing, research and development, and process-heavy industry in on-site support arrangements, in plant-level small projects and consulting roles, and in larger capital projects. Hargrove's key operating principle is to provide the Right People, in the Right Place, at the Right Time. We believe that relationships and partnering together provide the best results and long-term benefits for our clients. Work-life balance and flexibility are important areas of focus for Hargrove. We're happy to discuss flexible working hours, patterns, and locations to suit you and the business. **What You'll Be Doing** **Job Scope:** Generally responsible for supervision and technical direction over a team of designers when functioning as a lead designer. As lead designer, responsibilities will include total delivery of the electrical and instrumentation deliverables and services on time, within performance budget and meeting quality expectations. Duties may include performing advanced design work serving as a technical specialist for a complex design assignment. This level requires extensive progressive experience in electrical and instrumentation design and involves utilization of project controls for cost, schedule and quality of projects. This work will be performed under minimal supervision. **Primary responsibilities will include but not be limited to:** + Familiarity with and utilizing department design and drafting standards. + Familiarity with project scope, specifications and design criteria upon assignment to a project task team. + Recognize and communicate scope and design changes promptly. + On-site assistance during startup. + Producing estimate level preliminary designs and material take-offs suitable for the level of the estimate being performed on a project. + Producing detail design calculations and sketches for materials of construction associated with the project. Calculations produced will be neatly prepared and organized for efficient checking by others and efficient use by drafters/designers for preparing drawings and as a deliverable when required. + Producing designs with efficient use of construction materials with an overall emphasis on ease of construction and completed product meeting the expectations of the client. + Checking calculations and deliverables made by others to ensure accuracy, conformance to codes, specifications, design criteria and conformance to good engineering practice. + Assisting the drafting group in resolving routine layout and detailing problems. It is your responsibility to furnish sufficient sketches and details necessary for completion of engineering drawings. + Consulting with design leaders from other disciplines to ensure the smooth flow of vital information necessary for the scheduled completion of the project. + Advising the senior engineer concerning design or scope changes, which have been identified. + Assisting other engineers in developing and assembling scopes, drawings and specifications into a "package", enabling electrical/instrumentation purchase inquiries to be issued for procurement of materials or subcontract pricing. + Reviewing and checking vendor drawings and other discipline drawings for electrical/instrumentation input. + Developing construction specifications. + Reviewing fabrication drawings and other construction submittals for conformance to engineering drawings and specifications. + Performing fieldwork necessary to gather field data, check tie-ins and provide construction support. + Provide technical guidance to less experienced drafting and engineering personnel in the department. + Knowledge of the discipline specific methods, practices and techniques required to engineer, design and construct process and manufacturing projects. + Applying advanced engineering techniques and analysis to complex designs. + Produce installation details, motor control center single lines, electric room layouts, motor control elementaries, connection diagrams, cable schedules, control panel layouts and grounding, lighting, power and instrumentation plans under general supervision. + Developing conceptual layouts and cost studies as necessary to determine the simplest, most efficient approach to solving engineering tasks at hand. + Developing small work sharing packages for interoffice execution support **Ideal Background** **Education:** Associate degree in Engineering Technology or Computer-Aided Drafting is required. **Certification:** Certification is not required at this level. **Experience:** This position requires 15 or more years of relevant industrial experience in electrical and instrumentation drafting and design. **Required Knowledge, Skills, and Abilities:** + Knowledge and application of the current version of the National Electrical Code (NEC). + Familiarity with specifications and installation details of construction bulk materials and equipment. + Ability to perform lighting level calculations. + Ability to size wire, conduit and overcurrent protection for both lighting and power applications. + Ability to perform voltage drop calculations. + Ability to route conduit and cable tray. + Ability to calculate tray and conduit fill. + Ability to determine motor control center loading. + Ability to create accurate electrical installation documents from the information found on vendor equipment drawings. + Ability to determine load center unit substation loading. + Ability to size control valves using appropriate software. + Ability to develop specifications and data sheets for instrumentation, analyzers, control systems and actuated valves. + Familiarity with standards that apply to instrumentation and controls (ISA). + Ability to develop equipment specifications for equipment such as motor control centers, variable frequency drivers, induction and synchronous motors, load center unit substations. + Knowledge and understanding of schedule constraints and information requirements for the production of all electrical deliverables. + Ability to develop a construction cost estimate, a detailed engineering schedule and a man-hour budget for a small project or an area for a larger project. + Ability to determine construction material quantities. + Knowledge and application of company engineering design and CAD drafting standards. + Excellent communication skills, both verbal and written. + Good presentation skills + Virtual team skills and cross divisional relationships are developed and able to provide interoffice execution support with general supervision. **Physical Requirements** + Ability to sit, stand, or walk for long periods of time. \#LI-SH1 **Hargrove Culture** We work to create an environment founded on trust, personal integrity, and a "team mentality" so that each person understands the value of their contributions both on a project and company-wide level. We know that each person on our team contributes to the success of our company by pairing expertise and passion to meet and exceed the needs of the clients we serve across the globe. Our safety culture protects and promotes the well-being of every person who works with us and every person touched by our work. As a 100% Teammate owned company, we proudly offer a comprehensive benefits package including, paid holidays, personal paid time off, medical, dental, vision, life, and disability insurance, 401(k), and other benefits to eligible Teammates. **Equal Opportunity Employment Statement** Hargrove is an Equal Opportunity/Affirmative Action employer. We do not discriminate based upon race, color, national origin, religion, age, sex (including gender, sexual orientation, pregnancy, sexual identity, marital or family status), disability, military service or obligations, veteran status, or any other characteristic protected by law. Hargrove is a drug-free workplace. The selected candidate must be authorized to work in the United States. Hargrove is passionate about serving our clients within our industry and the local economy, and we recognize that our impact goes beyond building great projects. Our extraordinary teammates serve the community with their time, talent, and generosity. The Hargrove team is a family whose volunteerism makes a huge impact on our communities, and The Hargrove Foundation is the vehicle for making a true difference in the lives of others. We work to create an environment founded on trust, personal integrity, and a "team mentality" so that each person understands the value of their contributions both on a project and company-wide level. Hargrove has consistently been ranked one of the "Best Firms to Work For" by organizations such as ZweigWhite and Business Alabama. We pair expertise and passion to meet and exceed the needs of the clients we serve across the globe. Our teammates strive to expand their knowledge and contribute to the success of the organization. Stay informed about new opportunities that are relevant to your profile.

TITLE: Electric Technician A The Electrical Technician is responsible for electrical, electronics, and maintenance of all equipment. Performs other duties as needed. QUALIFICATIONS: Industrial maintenance degree or similar from a state certified technical school or community college is required. Completion of a 4-year electrical apprenticeship can be substituted Must have knowledge of basic industrial electrical components - relays, timers, contactors, proximity switches, etc. Must be able to read multimeters and amp meters. A background in industrial electronics and troubleshooting is required Experience with PLC controls and variable speed drives is preferred Basic computer knowledge Must have good communication skills Experience with PLC controls and variable speed drives is preferred Must be able and willing to work overtime, weekends and evenings as needed. Also must be able to work on-call as needed Must be able to read electrical schematics The ability to read blueprints and mechanical drawings is a plus Can work with limited supervision (ie. night shift) Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary Capable of effectively managing job-related stress and fostering productive workplace interactions JOB RESPONSIBILITIES: All skills, knowledge and job duties of Electrical Technician B. Troubleshoot and repair A/C, D/C motors, drives and inverters. Troubleshoot and repair HVAC systems. Troubleshoot and repair fire panels and alarm systems. Correctly identify and work on any electrical cabinet in the plant. Identify and safely work on any switchgear in the plant. Replace non-programmable devices such as relays, contactors, timers, PLC i/o cards. Use soldering for repairs as needed Check and change motor rotation if needed. Replace plant lighting and ballasts. Check and replace fuses. Troubleshoot electrical circuits. Assists Maintenance technician in the lubrication and repair of mechanical equipment Maintain all equipment in good running order Ensure that job site is clean and free of hazards Maintains good housekeeping and safety practices when running equipment Interacts and communicates with Production supervisor during shift and assist on production line when needed Maintains professional certifications and keeps updated on all procedures and policy changes; keeps training up to date Operates all maintenance equipment safely, follows LOTO procedures at all times. WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: Manufacturing Environment Ability to work in varying temperatures (cold and hot) Loud noise

As part of our ordnance systems team, you will be working alongside some of the industry's top talent on the forefront of energetics technology. We are currently hiring a Control Systems Engineer who as part of a team will be responsible for the design, implementation, commissioning, and troubleshooting of the complete system, including PLC/DCS (Distributed Control System) controls, Variable Frequency Drives (VFD's), Human Machine Interfaces (HMI s), and associated communication networks for process control and/or monitoring applications. This position works on capital Improvement projects and chemical production support at the Holston Army Ammunition Plant in Kingsport, TN. Here, we value our workforce, and their well-being. We prioritize safety, work life balance, and offer competitive benefits. This position is currently working on-site on a 9/80 schedule with every other Friday off. Make a difference doing work you can be proud of, be challenged, and be part of a team that shares a passion of helping to protect our nation. **Essential Duties** + Provide high level of Plant Support by responding to and resolving control system issues with urgency. + Work as part of a multidisciplinary team to estimate, design, implement, and commission chemical modernization projects for the manufacturing facility + Design and support all aspects of a control system (PLC, HMI, DCS, VFD, etc), including hardware, network, and software configuration. + Ensure work done is consistent with control systems standards and procedures, including participating as part of team as required to test and checkout system I/O, interlocks (safety and process) and automated control strategies that are part of the control system. + Review and drive improvements of the control system design with our customer and operators + Coordinate all work done with our customers, including providing guidance/ input for and/or writing any commissioning plan and subcontractor work (scope) that is required to complete work. + Understand and ensure compliance with safety regulations and quality standards, including completing all required safety training on time. + Identify and develop standards/ procedures / guides, training plans, process checklists and other quality solutions. + Contribute to Process Hazard Analysis, Root Cause Analysis and other investigations as assigned. + Review team projects for quality and accuracy. + Specify and requisition purchase of hardware and software as required by project + Develop and maintain strong working relationships with the customers supported + Be able to manage, prioritize, and support multiple projects at the same time. + On call to support production during off hours on a rotating basis **Required Education, Experience, & Skills** + Bachelor Degree in Electrical Engineering / Chemical Engineering / Controls System Engineering/ Computer Science and 6 years of applicable experience. May consider other engineering related or similar technical degree. + Ability to read and interpret P&IDs and Electrical Drawings. + Ability to read, interpret and/or write documentation needed to program a complete control system (Functional Specification, Control Narrative, I/O List, etc) + Experience working on (leading and/or as part of a team) design, implementation, troubleshooting, and commissioning PLC/HMI applications with products such as Siemens PCS7 and/or Rockwell / Allen-Bradley for process or automation systems. **Preferred Education, Experience, & Skills** + Prior work experience in a chemical manufacturing, petrochemical, or hazardous material production facility + Experience providing plant support within a 24/7 manufacturing facility + Experience working with Vendor Skids and integrating them into complex manufacturing/ chemical processes. + Experience with variable speed drives, positioners, actuators, valves, and instrumentation used for chemical or industrial plant production processes + Knowledgeable in industrial network architectures, topologies, cybersecurity, servers, software validation and simulation. + Experience with multiple control system platforms including Siemens PCS7, Siemens Simatic Batch, and Allen Bradley ControLlogix/ Compactlogix/ PlantPAx,. + Experience configuring and maintaining Historian databases including Rockwell Vantage Point and Siemens Process Historian/ Information Server. + Experience with a variety of control system communication protocols including Profibus PA/DP, Profinet, Modbus TCP, and HART. + Experience with Variable Frequency Drives, including Siemens and Eaton. + Professional Engineer (PE) or Engineer In Training (EIT) **Pay Information** Full-Time Salary Range: $94728 - $161038 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20 hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. **Principal Controls Systems Engineer** **113523BR** EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression

Marathon TS is seeking a Facilities Specialist with Expert ELECTRICAL experience. Candidate should have experience supporting Data Center Environments. Must be open to rotating shift that supports a 24/7 environment. Job Description We are looking for to add staff to a newly built Data Center supporting both commercial and federal clients in SW Virginia. The Facility Support Specialist assists the Facilities Manager in the maintenance of Mineral Gap Data Center facilities. 1. Performs typical maintenance tasks to support the data center floor and the entire facility. 3. Must be an Expert at troubleshooting HIGH Capacity, high voltage electrical systems. 5. Performs operational support for customers through the provisioning of rack space, requesting data communications connections, and deploying IT infrastructure into the rack space. 7. Training and professional development, maintaining technical proficiency and acquiring new technical knowledge by reading technical journals, manuals, e-mail lists, newsgroups, and standards documents, attending seminars and classes, and participating in discussions with colleagues and consulting with vendors. Required Education and Experience Supervisory Responsibility This position has no supervisory responsibility. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Position Type/Expected Hours of Work This is a full-time position. Position will support a 24/7 environment. Applicants will have a rotating shift. Additional Eligibility Qualifications Work Authorization/Security Clearance (if applicable) Must be a US Citizen. Additional Information All your information will be kept confidential according to EEO guidelines.

Oldcastle APG, a CRH Company, is North America's leading provider of innovative outdoor living solutions that enable customers to Live Well Outside. The manufacturer's portfolio of premier building products inspires endless possibilities while providing enduring outdoor spaces where people can connect, reflect and recharge. Award-winning brands include Belgard hardscape, Echelon Masonry, MoistureShield composite decking, RDI railing, Catalyst Fence Solutions, Sakrete packaged concrete, Amerimix mortar, Pebble Technology International pool finishes, Lawn & Garden mulches and landscape features, and Techniseal sands and sealant technologies. Job Summary The role will involve integrating various technologies such as warehouse management and transportation management systems and physical equipment used for optimized pick, pack and internal transport needed to run a modern distribution system. Job Location * This is an onsite role based in Morristown, TN Job Responsibilities * Design and implement advanced handling solutions that optimize material flow * Design and implement solutions that result in optimal pick and pack operations * Design and implement warehouse layout solutions in support of enhanced product storage and retrieval * Design and implement warehouse management solutions for tracking inventory and vehicular assets * Understand efficient warehouse design and layout in support of truck loading operations * Understand Item Master management in support of technology solutions * Experience with LTL and FTL operations and network design * Ensure technology solutions integrate seamlessly with Warehouse and Transportation Management systems * Ensure technology solutions reduce costs and optimize performance * Conduct cost-benefit analyses to determine most cost-effective technology solutions * Stay up to date with industry trends and advancement in logistics technology * Develop Requests for Proposal in support of technology project bids * Oversee training of personnel in support of technology project implementations Job Requirements * Strong commitment to safety and operational efficiency * Bachelor's degree in engineering or any technology related field * 5+ years of experience in multi-SKU warehouse management * Experience with technology solutions such as warehouse management systems * Experience with LTL and FTL operations * Strong understanding of warehouse procedures and inventory management * Proficiency with Microsoft Office Suite (especially Excel) * Excellent communication and interpersonal abilities * High attention to detail and accuracy * Good organizational and problem-solving skills * Ability to work under pressure and manage multiple tasks simultaneously * Understanding or certification in APICS, CLTD, and Six Sigma is a plus What CRH Offers You * Highly competitive base pay * Comprehensive medical, dental and disability benefits programs * Group retirement savings program * Health and wellness programs * An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle APG, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law. Date: Nov 13, 2025

At BWX Technologies, Inc. (NYSE: BWXT), we are People Strong, Innovation Driven. A U.S.-based company, BWXT is a Fortune 1000 and Defense News Top 100 manufacturing and engineering innovator that provides safe and effective nuclear solutions for global security, clean energy, environmental restoration, nuclear medicine and space exploration. With more than 7,800 employees, BWXT has 14 major operating sites in the U.S., Canada and the U.K. We are the sole manufacturer of naval nuclear reactors for U.S. submarines and aircraft carriers. Our company supplies precision manufactured components, services and fuel for the commercial nuclear power industry across four continents. Our joint ventures provide environmental restoration and operations management at a dozen U.S. Department of Energy and NASA facilities. BWXT's technology is driving advances in medical radioisotope production in North America and microreactors for various defense and space applications. For more information, visit ************* Follow us on LinkedIn, X, Facebook and Instagram. Project Engineer, BWXT - Technical Services Group, Inc., NFS Project - Erwin, TN Job Duties/Responsibilities: This position is within BWXT's Technical Services Group (TSG). TSG in Erwin performs demolition & decommissioning projects for Nuclear Fuel Services. * Assist in performing detailed planning and author comprehensive work procedures to support decommissioning & demolition projects in an operating nuclear facility. * Identify and develop proposed updates to project related drawings. * Assist in maintaining project-related documentation within a configuration management system and prepare required documents for project completion. * Maintain knowledge of technical requirements applicable to the assigned scope of work. * Participate in walking down systems and site work areas with craft labor and other project personnel to verify design drawing accuracy and to develop overall project plan. * Provide technical backup to in-process field work. * Ensure project deliverables are completed on time and according to schedule. Job Qualifications / Requirements: * Bachelor of Science from an ABET accredited Engineering program (Mechanical, Civil, Electricial, Structural). * Able to read and understand Piping and Instrumentation Drawings. * Must be a US Citizen, no dual citizenship. * Must be able to obtain and maintain a Department of Energy Level "Q" Security Clearance. Pay: $64,000 - $101,000 The base salary range for this position in Tennessee (US-TN) at the start of employment is expected to be between $64,000 and $101,000 per year. However, the base salary offered is based on local job market factors, and may vary further depending on factors specific to the selected job candidate, such as job-related knowledge, skills, experience, and other objective business considerations. Subject to these considerations, the total compensation package for this position may also include other elements, such as an annual cash incentive in addition to a full range of medical, retirement, and/or other benefits. Details of participation in these benefit plans will be provided at such time the selected job candidate receives an offer of employment. If hired, the selected job candidate will be employed 'at-will,' unless employed at a location and in a position subject to a collective bargaining agreement. The company further reserves the right to modify base salary (as well as any other discretionary payment, compensation or benefit program) at any time, including for reasons related to individual performance, company or individual department/team performance, and other market factors. As a federal government contractor, BWX Technologies, Inc. and any subsidiaries, affiliates and related entities ("BWXT" or the "Company") complies with all federal, state, and local laws and customer requirements regarding health and safety protocols. As such, all BWXT new hires will be required to adhere to applicable Company health and safety requirements within the workplace as a condition of employment. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified information or matter. Position requires U.S. citizenship with (no dual citizenship) ability to obtain and maintain a Department of Energy (DOE) security clearance which involves an extensive criminal and financial background investigation, drug test and previous employment reference verifications. BWXT is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color, religion, sex, national origin, citizenship, age, disability, protected veteran or other protected status. BWX Technologies, Inc. and its affiliates and subsidiaries (BWXT) is not responsible for and does not accept any liability for fees or other costs associated with resumes or candidates presented by recruiters or employment agencies, unless a binding, written recruitment agreement between BWXT and the recruiter or agency exists prior to the presentation of candidates or resumes to BWXT and includes the specific services, job openings, and fees to be paid ("Agreement"). BWXT may consider any candidate for whom a recruiter or agency has submitted an unsolicited resume and explicitly reserves the right to hire such candidate(s) without any financial obligation to the recruiter or agency unless an Agreement is in place prior to presentation and such Agreement explicitly encompasses the job opening for which such fees or costs are sought. An email, verbal or other informal contact with any person within BWXT will not create a binding agreement. Agencies or recruiters without an Agreement are directed not to contact any hiring managers of BWXT with recruiting inquiries or resumes. Recruiters and agencies interested in partnering with BWXT may contact BWXT's Talent Acquisition team at talent_********************.

Controls Engineers 3 are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, machinery and processes. Controls Engineers work in various industries including industrial controls, water / wastewater, power controls and protection, and transportation systems. They're technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs. Responsibilities **Design / Engineering** + Originates design documents for small projects and in support of large programs. + Narrative Design Documents + Requirements Analysis + Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens/ Hardware / Communications) + Preparation of Specifications + Perform QA/QC and technical reviews of designs + Plans and Designs Procedures and Fixtures for Integrated Systems Factory Testing o Internal/External Comment Resolution + Programming + Lead programming / configuration team efforts for complex automation and SCADA applications. + Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems. + Testing / Troubleshooting / Deployment / Commissioning + Author testing / commissioning procedures + Preparation of test reports + Originates test procedures + Commissioning of deployed systems + Development of test fixtures and simulation devices + Perform Factory and Field Testing + Maintenance + Perform troubleshooting on service calls to existing and legacy system operators. + Perform hardware / software upgrades and replacements on existing systems. **Managerial Responsibilities** + Estimates + Conducts any surveys, inspections, tours, etc. of client sites, as required. + Prepares cost estimates and supporting documents for small projects. + Assists senior engineers in preparation of Bids and Proposals cost estimates and supporting documentation. + Evaluation and pricing of change orders + Personnel Management + Assigns technical tasks and coordinates with entry-level engineers + Assigns tasks and coordinates with Technical Staff Qualifications **Field Experience** + Experience in reading electrical and control schematics and plans + Experience in control system startup, configuration, and calibration + Experience in testing and troubleshooting control systems + Experience using basic electrical and machinist hand tools + Experience using testing, calibration, or industry-specific tools and software Tools / Software + Experience in computer networks + Experience in CAD/CAE Software (AutoCAD / EPLAN) + Standard Office Software (Microsoft Word, Excel, etc.) **Requirements** + Proficient in programming languages such as ladder logic and structured text. + Strong problem-solving skills and ability to troubleshoot complex automation issues. + Proficient in designing, programming, and troubleshooting PLCs or DDCs from at least 1 of the following platforms: + Siemens (SIMATIC) + Allen-Bradley (Rockwell Automation) (Plant Pax preferred) + Schneider Electric (Modicon) + Tridium Niagara Framework + ABB (AC500, AC800M) + Omron + KMC Controls + Johnson Controls Metasys + Honeywell WEBS + Johnson Control FX + Siemens Desigo/Apogee + Distech Controls + Schweitzer Engineering Laboratories + GE Intelligent Platforms + Proficient in designing, programming, and troubleshooting SCADA solutions from at least 1 of the following platforms: + AVEVA (formerly Wonderware) InTouch, System Platform + Ignition by Inductive Automation + GE Digital (iFIX, CIMPLICITY) + Siemens WinCC + Rockwell Automation FactoryTalk View + AVEVA (formerly Schneider Electric) Citect SCADA + Intellution FIX32/HMI32 (Historical) by GE Digital + VTScada by Trihedral Engineering Limited + AVEVA (OSIsoft PI) Historian + This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy. **Preferred Licenses / Certifications** + Design Build Institute of America (DBIA) + Certified SCADA Security Architect (CSSA) + Certified Automation Professional (CAP) + Engineer in Training (EIT) In relevant in field + Certification in one or more PLC / Automation Platform, such as: Schneider, Rockwell, Siemens, Niagara, etc. + Certification in one or more SCADA platform, such as: AVEVA, Rockwell, Iconics, Ignition, etc. **Education / Experience** + Master's degree in electrical engineering, automation engineering, or a related field 3+ years of experience + Bachelor's degree in electrical engineering, automation engineering, or a related field with 5+ years of experience **Abilities** + Exposure to computer screens for an extended period of time. + Sitting for extended periods of time. + Reach by extending hands or arms in any direction. + Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard. + Listen to and understand information and ideas presented through spoken words and sentences. + Communicate information and ideas in speaking so others will understand. + Read and understand information and ideas presented in writing. + Apply general rules to specific problems to produce answers that make sense. + Identify and understand the speech of another person. + Attend regular in-person meetings with customers outside of assigned office.

Reporting to the Plant Manager, the Project Engineer is responsible for identifying client needs and coordinating plant projects. They ensure compliance, quality, and deadlines while minimizing costs. Responsibilities Coordinate plant projects, including new lines, modifications, or redesigns. Update plant layouts as needed. Oversee installation projects to ensure quality and timely delivery. Manage third-party contractors. Ensure safe execution of work under their responsibility. Adhere to budgets and bidding processes. Analyze technology, assess business needs, and evaluate market trends to identify and procure equipment that aligns with project requirements. Take ownership of all automation initiatives. Collaborate with various departments to meet client project needs. Manage and follow up on requests from internal teams. Perform other duties as assigned. Requirements Bachelor's degree in Mechanical, Industrial, or related Engineering field, or equivalent work experience. 5+ years of direct project engineering and/or plant maintenance experience (required). Preferred experience in the food or pharmaceutical manufacturing industry. Leadership skills: Ability to lead and motivate project teams, delegate tasks effectively, identify new opportunities, work with discipline, prioritize, and formalize paybacks. Industry knowledge: Familiarity with relevant industry codes, regulations, and standards. Strong problem-solving and decision-making skills; ability to identify and resolve technical issues and challenges. Project management skills: Strong time management and analytical skills. Excellent oral and written communication skills, judgment, ethics, integrity, and result-oriented approach; ability to explain technical concepts clearly. Experience using Microsoft Project or equivalent and other computer-based applications (iPad, OneNote, etc.); ability to use AutoCAD. Ability to adapt and improvise to operational changes and requirements; ability to work in a fast-paced, challenging, and consistently changing environment. #220

Job Description Simulation, Modelling and Control Engineers - Permanent Bristol Area - Attractive - Marine and Defence Multiple Simulation, Modelling and Control Engineers are required within an Advanced Aerospace, Marine and Defence Services Organisation. The Simulation, Modelling and Control Engineers will be experienced engineers working on technical projects while shaping the future of engineering. The Simulation, Modelling and Control Engineers role will suit an engineer looking to diversify or develop their experience and work within a team responsible for producing models at vehicle and system level representing plant and control algorithms. The Simulation, Modelling and Control Engineers will use the MathWorks tool-set including Simulink and associated toolboxes, and a good understanding of the use of version control software (e.g. GIT) and task management tool-sets as part of collaborative working is required. The Simulation, Modelling and Control Engineers are expected to have industrial engineering experience, using modelling for the development and analysis of complex systems. The Simulation, Modelling and Control Engineers will have the following responsibilities (depending on experience): Control Systems, System performance, Equipment and Systems Modelling and or Vehicle Dynamics. Flexible working May be available with a hybrid working model for part of the week. The Simulation, Modelling and Control Engineers will be required to: Develop task definition (together with the technical lead) Define model and control algorithm requirements Build evaluate and test of systems models Peer review of systems models Preparation and presentation of results, systems models, etc for customers Formal verification and validation of systems procedures Authoring systems model and technical documentation The Simulation, Modelling and Control Engineers Skills, Qualifications, and Experience: Candidates will be degree qualified (or equivalent), in a related discipline preferably Aerospace Engineering, Mechanical Engineering, Electrical Engineering or Mathematics. Must be able to demonstrate a good understanding of fundamental modelling principles. Must have knowledge of Matlab/Simulink, Actuated Systems, Electro-Mechanical Systems, Multi-Body Simulation, Vehicle Dynamics, and Systems Engineering. Other desired skills and Experience with are: Marine Sector, Real Time Models, Code Generation, C/C++, Professional Attitude with Strong Time Management and Organisational Skills Demand for this role will undoubtedly be high, and interviews will be arranged very soon and to be considered, please apply today. If you have any questions about the Simulation, Modelling and Control Engineers, then contact: Peter Heap at Jonathan Lee Recruitment on or ** Security Clearance and UK Nationals only for this role due to the nature of systems involved** Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

Will work with our team of engineers for the updates and designing of our electronic products. Responsibilities: Design, manufacturing and application of ac-dc power supplies, dc-dc converters and custom power supplies and systems. New product development including circuit, mechanical and thermal design. Manufacturing support for new and existing product lines. Embedded microprocessor systems, interfaces & development of firmware. Customer application support / problem solving. Requirements Requirements: **Must be able to work in the USA. Job Type: Full-time Must possess Bachelor of Electrical Engineering or equivalent. Benefits: Salary Commensurate with Experience 10 paid holidays.

This position requires the minimum of a Bachelor's Degree with emphasis in manufacturing engineering, mechanical engineering, or materials engineering Three (3) to five (5) years of product engineering experience as a minimum. PHYSICAL DEMANDS/EQUIPMENT USED: Good manual dexterity to operate computer equipment. Some lifting and physical exertion is required. Common hand-held measurement instruments (eg calipers and micrometers), endure standing or walking for extended periods. Good eyesight is required to render decisions on physical attributes inherent in the process. SKILLS AND ABILITIES: Basic computer operation (including Microsoft office products, AutoCad) , effective oral and written communications, knowledge of ABS, program management, good statistical analysis skills essential, background in lean manufacturing methods, kaizen, and root cause analysis. Blue print reading and Geometric tolerancing. To provide technical support for part specific ceramic core production programs. Support includes the procurement and maintenance of tooling, fixtures, and equipment; interpretation of customer specifications; and development of safe, cost efficient processes. Mentor production engineers and improve engineering systems. Has nonconforming product disposition authority within the scope of this job description. Participate in NPI and Yield improvement teams to leverage best practices for process improvement Manage die and fixture life to facilitate the timely replacement of worn tooling Assure tooling and processes comply with corporate best practices as defined in the Core Manual (CP) and Tooling Manual (TM). Assist in quotation of new products and review design for producibility Leverage lessons learned in NPI process to production Draft tooling letters for NPI product including core dies and required support tooling Have a specific part ownership that consist of NPI/replacement tools/problem jobs. Improve yield, throughput, and quality of specific parts as assigned Manage tooling quality, life, and safe handling procedures for large fixtures and product. Statistical analysis of production dimensional data in order to improve processes Cost justification and payback of expenditures through the X-order system. Monitor dimensional and other process parameter trends for control and capability. Continuous improvement of tooling, methods, and processes. Review and disposition scrap, define and document product repair / rework procedures Manage part quality and cost, and improvement activities through Scrap as percent of sales improvement Develop manufacturing processes that assure conformance to customer specifications Troubleshooting processes and determining timely decisions for correction Provide technical support to manufacturing to determine root cause to problems and implement corrective actions Originate and maintain work instructions, standard work, and standard routing (Q and R) for parts Communicate customer specification requirements to manufacturing associates Document HCS production process to comply with corporate specifications PM301, PM302, and PM303. Improve safe work conditions, and ergonomic robustness of tooling and fixtures. Improve manufacturing methods to optimize efficiency and lower costs Continuous improvement of manufacturing systems through application of ABS principles Regular interaction with casting engineers and OEM in order to address technical problems, improve process capability, and lower cost. Determine cost, yield, and delivery impact of proposed specification changes. Control rework, release, and use of customer owned tooling per TM1000 Understand impact of core on casting process, co-develop improvements with casting engineers Negotiate reality in customers specifications as required by process capability Mentor production engineers and engineering techs. Continuously improve engineering systems through application of ABS principles Assist in training manufacturing associates Maintain high attendance record Perform duties in a safe and efficient manner Perform other work-related duties as assigned

At Civil & Environmental Consultants, Inc. (CEC), every team member is personally invested in serving our clients with integrity, delivering results that matter, and growing meaningful careers. As employee-owners, we're accountable not just for our work, but for creating an environment that supports and challenges one another. Our people are our priority - and that's what drives us to dig deeper, collaborate smarter, and build lasting relationships inside and outside of our company. We're looking for a Project Engineer/Geologist to join our growing team in Johnson City, TN. In this role, you'll support a variety of environmental compliance and site investigation projects focused on groundwater, soil, sediment, and air quality assessments. You'll assist with and lead field sampling efforts, perform data interpretation and visualization, and contribute to the development of environmental reports and remediation strategies. You'll also work closely with project managers and senior technical staff to deliver high-quality work for a range of public- and private-sector clients across multiple industries. Responsibilities: Perform field sampling and monitoring for groundwater, soil, surface water, sediment, and air quality, including oversight of soil borings and well installations Analyze and interpret environmental data to support the development of maps, cross-sections, and technical reports Assist with the preparation of environmental assessments, compliance documents, and remedial action plans Operate and maintain field equipment such as pumps, meters, and generators while ensuring safe, efficient field practices Collaborate with project teams to meet schedules and deliverables, supporting both field and office-based project tasks Our Johnson City office sits in the heart of Northeast Tennessee, surrounded by the natural beauty of the Appalachian Mountains. With easy access to hiking, lakes, and scenic drives, plus a growing downtown and vibrant community culture, Johnson City offers a high quality of life and a welcoming environment for professionals looking to live and grow in a small-city setting. Qualifications Bachelor's degree in Environmental Science, Geology (preferred), or related field; 5+ years of relevant environmental consulting experience; Valid driver's license and willingness to travel overnight as needed; Strong written and verbal communication skills; Detail-oriented with solid organizational and time management abilities; Ability to work independently or as part of a team in both office and field settings; Competency in Microsoft Office (Word, Excel, PowerPoint, Outlook); Working knowledge of field tools and equipment such as pumps, compressors, and field meters; 40-hour HAZWOPER certification (preferred but not required); Willingness to obtain specialized safety or technical training as needed. About Us We have experts! CEC is consistently ranked as a Top 500 Design Firm and Top 200 Environmental Firm by Engineering News-Record. We are looking for people who enjoy using their education and experience to solve difficult technical problems and work on interesting projects. You can accomplish this while working with a team of professionals who are equally motivated to provide high levels of service to our clients and to teach you along the way. We have support! We have a variety of Employee Resource Groups, including CEC Community - focused on giving back to the communities in which we work; CEC Ignite - focused on helping professionals early in their careers to develop their pathway; CEC iDEA - focused on inclusion, diversity, equality, and acceptance; and CEC Women - focused on creating internal and external opportunities for women to network and leverage professional experience! We care about our people! People and Culture are two of the five elements of our strategic plan. When you care about your people, they will want to grow a career with you - that is our goal. CEC offers you a small-firm work environment with large-firm opportunities. Not only will we help you develop professionally, but we will also provide an opportunity to become an owner of the firm and share in its success. CEC offers a matching 401(k); profit sharing; a performance bonus; company stock; medical, dental, and vision insurance; short and long-term disability; tuition assistance; professional development; and work-life balance. CEC is an equal opportunity employer. We do not discriminate in recruiting, hiring or promotion based on race, color, religion, sex (including sexual orientation, gender identity or expression, transgender status), national origin, age, disability, protected veteran status or any other basis or characteristic prohibited by applicable federal, state, or local law. THIRD PARTY RECRUITERS If CEC has not expressly requested recruiting services or contractually engaged with you for recruiting services on a specific position, any resumes or candidate profiles sent to CEC shall be considered unsolicited. Therefore, any such submissions will be considered property of CEC, with no associated fees due to your firm.

At Civil & Environmental Consultants, Inc. (CEC), every team member is personally invested in serving our clients with integrity, delivering results that matter, and growing meaningful careers. As employee-owners, we're accountable not just for our work, but for creating an environment that supports and challenges one another. Our people are our priority - and that's what drives us to dig deeper, collaborate smarter, and build lasting relationships inside and outside of our company. We're looking for a Project Engineer/Geologist to join our growing team in Johnson City, TN. In this role, you'll support a variety of environmental compliance and site investigation projects focused on groundwater, soil, sediment, and air quality assessments. You'll assist with and lead field sampling efforts, perform data interpretation and visualization, and contribute to the development of environmental reports and remediation strategies. You'll also work closely with project managers and senior technical staff to deliver high-quality work for a range of public- and private-sector clients across multiple industries. Responsibilities: Perform field sampling and monitoring for groundwater, soil, surface water, sediment, and air quality, including oversight of soil borings and well installations Analyze and interpret environmental data to support the development of maps, cross-sections, and technical reports Assist with the preparation of environmental assessments, compliance documents, and remedial action plans Operate and maintain field equipment such as pumps, meters, and generators while ensuring safe, efficient field practices Collaborate with project teams to meet schedules and deliverables, supporting both field and office-based project tasks Our Johnson City office sits in the heart of Northeast Tennessee, surrounded by the natural beauty of the Appalachian Mountains. With easy access to hiking, lakes, and scenic drives, plus a growing downtown and vibrant community culture, Johnson City offers a high quality of life and a welcoming environment for professionals looking to live and grow in a small-city setting. Qualifications Bachelor's degree in Environmental Science, Geology (preferred), or related field; 5+ years of relevant environmental consulting experience; Valid driver's license and willingness to travel overnight as needed; Strong written and verbal communication skills; Detail-oriented with solid organizational and time management abilities; Ability to work independently or as part of a team in both office and field settings; Competency in Microsoft Office (Word, Excel, PowerPoint, Outlook); Working knowledge of field tools and equipment such as pumps, compressors, and field meters; 40-hour HAZWOPER certification (preferred but not ); Willingness to obtain specialized safety or technical training as needed. About Us We have experts! CEC is consistently ranked as a Top 500 Design Firm and Top 200 Environmental Firm by Engineering News-Record. We are looking for people who enjoy using their education and experience to solve difficult technical problems and work on interesting projects. You can accomplish this while working with a team of professionals who are equally motivated to provide high levels of service to our clients and to teach you along the way. We have support! We have a variety of Employee Resource Groups, including CEC Community - focused on giving back to the communities in which we work; CEC Ignite - focused on helping professionals early in their careers to develop their pathway; CEC iDEA - focused on inclusion, diversity, equality, and acceptance; and CEC Women - focused on creating internal and external opportunities for women to network and leverage professional experience! We care about our people! People and Culture are two of the five elements of our strategic plan. When you care about your people, they will want to grow a career with you - that is our goal. CEC offers you a small-firm work environment with large-firm opportunities. Not only will we help you develop professionally, but we will also provide an opportunity to become an owner of the firm and share in its success. CEC offers a matching 401(k); profit sharing; a performance bonus; company stock; medical, dental, and vision insurance; short and long-term disability; tuition assistance; professional development; and work-life balance. CEC is an equal opportunity employer. We do not discriminate in recruiting, hiring or promotion based on race, color, religion, sex (including sexual orientation, gender identity or expression, transgender status), national origin, age, disability, protected veteran status or any other basis or characteristic prohibited by applicable federal, state, or local law. THIRD PARTY RECRUITERS If CEC has not expressly requested recruiting services or contractually engaged with you for recruiting services on a specific position, any resumes or candidate profiles sent to CEC shall be considered unsolicited. Therefore, any such submissions will be considered property of CEC, with no associated fees due to your firm.

Job DescriptionDESIGN / PROJECT ENGINEERManager: Ben King FLSA Classification: ExemptSalary Range: $60,000 per year (Entry level preferred) ADPma is looking for a Design / Project Engineer to join our group of talented Engineering Professionals to help expand the quantity and quality of projects in ADPma's current portfolio. The Design / Project Engineer must be willing to own all aspects of the engineering process throughout the total life cycle of a development project to FAA approval and manufacturing. These processes include but are not limited to choosing & sourcing the proper materials, machine processes, and the ability to locate areas of improvement within a project. A willingness to learn, improve both the project and the person, and the ability to seek and share insight with others is necessary. Experience with MS Office, SolidWorks, and GD&T fundamentals is preferred. About ADPma: ADPma is a leading aerospace company specializing in the design, qualification, certification, manufacturing, and sale of proprietary aircraft parts. We are an OEM and aftermarket supplier to the global commercial aviation and defense sectors of the industry. Founded over 20 years ago in the East Tennessee foothills of the Appalachian Mountains, we have a well-established and hard-earned reputation for engineering excellence, manufacturing expertise, and outstanding customer support. Simply put, we relentlessly focus on solving our customers' most unique and challenging pain-points and driving to an unprecedented level of value, to our customers in the aviation industry. Responsibilities: Re-engineer legacy aerospace projects using ADPma's established engineering fundamentals. Utilize SolidWorks software for generating accurate 3D models and drawings (for use during engineering, manufacturing, and sales). Support engineering colleagues on large projects where there are crossover issues impacting their areas of accountability. Interests in working on a wide range of projects that exist on an airplane ranging from fluid / gas switches, electromechanical devices, actuators, gearing, and other mechanical parts. Learn the ins and outs of projects to support ADPma's Business Development and Sales Teams. Potential travel to customers and manufacturing facilities. Qualifications: Bachelor's degree in engineering or experience as a mechanical/design engineer (aerospace, federal contracting, and high-growth entrepreneurial environment preferred). A working knowledge of manufacturing techniques for product improvements related to reliability and cost saving. A working knowledge of GD&T fundamentals. A working knowledge of Microsoft Office software. Have a working knowledge of SolidWorks software. Comfortable working in a high-performing, rapidly growing business environment. Comfortable working with your peers. Initiative-taker who isn't satisfied with the status quo and takes ownership of their sector of responsibility. Obsess over critical details and documentation while also embodying a pragmatic understanding of engineering and manufacturing processes Willingness to dive in, roll up your sleeves, and get stuff done yourself. You find joy simplifying the complicated and finding clarity amidst the chaos. Benefits: Medical, Vision, and Dental. Health Savings Account. Life Insurance Earned PTO policy. Working Conditions: Operates in office, warehouse, and machine shop settings. May experience a variety of temperatures and other clement conditions throughout the workday. Low to moderate noise level. Cognitive & Physical Demands: Daily use of professional judgement in alignment with Company values and policies, ability to communicate effectively verbally and in writing. Frequently: Computer use, sitting, standing, walking. Occasionally: bending, kneeling twisting, grasping, reaching, and lifting. Able to lift 25 pounds at a time periodically. ADPma is an Equal Opportunity Employer. We are dedicated to diverse representation on our teams, in our services, and all layers of leadership. We are focused on identifying and dismantling barriers that lead to a more diverse workforce and continue to strive to maximize benefits to the communities we impact through diversity and inclusion in strategy and design. Powered by JazzHR Ufc8RkJPS5

Marathon TS is seeking a Facilities Specialist with Expert ELECTRICAL experience. Candidate should have experience supporting Data Center Environments. Must be open to rotating shift that supports a 24/7 environment. Job Description We are looking for to add staff to a newly built Data Center supporting both commercial and federal clients in SW Virginia. The Facility Support Specialist assists the Facilities Manager in the maintenance of Mineral Gap Data Center facilities. 1. Performs typical maintenance tasks to support the data center floor and the entire facility. 3. Must be an Expert at troubleshooting HIGH Capacity, high voltage electrical systems. 5. Performs operational support for customers through the provisioning of rack space, requesting data communications connections, and deploying IT infrastructure into the rack space. 7. Training and professional development, maintaining technical proficiency and acquiring new technical knowledge by reading technical journals, manuals, e-mail lists, newsgroups, and standards documents, attending seminars and classes, and participating in discussions with colleagues and consulting with vendors. Required Education and Experience Supervisory Responsibility This position has no supervisory responsibility. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Position Type/Expected Hours of Work This is a full-time position. Position will support a 24/7 environment. Applicants will have a rotating shift. Additional Eligibility Qualifications Work Authorization/Security Clearance (if applicable) Must be a US Citizen. Additional Information All your information will be kept confidential according to EEO guidelines.

**Your Future at M.C. Dean** We're seeking people driven to excellence and inspired to have a meaningful impact powering, automating, integrating, and securing the world's most critical infrastructure and facilities. This translates into fulfilling opportunities for employees driven to excel in a meaningful career. As an employee at M.C. Dean, you will join forces with more than 5,800 professionals who engineer and deploy automated, secure and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Together, we transform the way complex, large-scale systems are designed, delivered, and sustained-enhancing client outcomes, improving lives, and changing the world for the better. Controls Engineers 1 are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, machinery and processes. Controls Engineers work in various industries including industrial controls, water / wastewater, power controls and protection, and transportation systems. They're technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs. Responsibilities **Design / Engineering** + Originates design documents for small projects and in support of large programs + Narrative Design Documents + Requirements Analysis + Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) + Preparation of Specifications + Perform QA/QC and technical reviews of designs + Plans and Design Procedures and Fixtures for Integrated Systems Factory Testing + Comment Resolution + Testing / Troubleshooting / Deployment / Commissioning + Author testing / commissioning procedures + Preparation of test reports + Originates test procedures + Commissioning of deployed systems + Development of test fixtures and simulation devices + Perform Factory and Field Testing + Maintenance + Perform troubleshooting on service calls to existing and legacy system operators + Perform hardware / software upgrades and replacements on existing systems Qualifications **Education / Experience** + Bachelor's degree in electrical engineering, automation engineering or related field with 0+ years of experience **Abilities** + Exposure to computer screens for an extended period of time. + Sitting for extended periods of time. + Reach by extending hands or arms in any direction. + Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard. + Listen to and understand information and ideas presented through spoken words and sentences. + Communicate information and ideas in speaking so others will understand. + Read and understand information and ideas presented in writing. + Apply general rules to specific problems to produce answers that make sense. + Identify and understand the speech of another person.