Electrical engineer jobs in Knoxville, TN - 310 jobs

The Sr Automation Controls Engineer is responsible for developing, implementing, supporting and improving a broad variety of automated control systems. These systems range in scope from simple single loop controllers and relay logic to advanced HMI - PLC based systems. The Sr Automation Controls Engineer (ACE) will know and understand how to connect automation with the processes of coffee roasting, packaging and distribution **Responsibilities:** + Design, develop, enhance and implement automated solutions that improve employee safety, product quality, manufacturing efficiencies, and reduce costs **.** + Support the commissioning and optimization of both new and existing manufacturing equipment. + Troubleshoot and repair existing manufacturing equipment. + Design, implement and support automated system networks. + Manage change control and system documentation. + Ensure business continuity through industry standards and good engineering practices. + Develop controls and automation skills and capabilities within the maintenance and engineering team. The goal is to enable the technicians to perform appropriate controls and electrical diagnostics and troubleshooting prior to calling the controls engineer + Develop/support and implement data acquisition and reporting systems to support testing and evaluation work in accordance company and site goals + Initiate, plan, execute, monitor and control automation centric projects + Manage and coordinate activity on capital and continuous improvement projects. + Interface with and support manufacturing department heads and supervisors as needed to support automated systems and processes. + Interface with and support other Keurig Dr Pepper Engineering Disciplines. + Interface with and direct vendors and contractors. + Preparation and administration of training for maintenance and operations personnel. + Follows all policies, procedures, ergonomic standards and safety requirements as defined by Keurig Dr Pepper. + Able to set priorities based on production needs. + Performs other duties as assigned **Total Rewards:** + Salary range: $76,400 - $133,800 + Actual placement within the compensation range may vary depending on experience, skills, and other factors + Benefits, subject to election and eligibility: Medical, Dental, Vision, Disability, Paid Time Off (including paid parental leave, vacation, and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement + Annual bonus based on performance and eligibility + Benefits eligible Day 1! **Requirements:** + BS in Engineering or equivalent experience + 5+ years of Industrial Automation experience in a manufacturing environment. + Extensive PLC programming experience is required. Prefer Allen-Bradley systems experience including, but not limited to, the Rockwell FactoryTalk suite of software, Logix platform, and proficient understanding of Allen-Bradley industrial networks. + Working knowledge industrial communication protocol. + Experience with Manufacturing Execution Systems. **Competencies** + Hands on electrical experience with control panels and electrical circuits + Good working knowledge of robotic control systems, preferably with FANUC. + Good working knowledge of variable speed and servo drives, preferably Allen-Bradley + Knowledge of visual basic and databases a plus. + Possess a good understanding of computer and industrial networks + Ability to work hours outside of routine schedule as necessary. + Lean Manufacturing experiences a plus. + Ability to get along with others, be punctual, and follow instructions. + Ability to effectively perform in a fast-paced, dynamic work environment. + Ability to follow Keurig Dr Pepper policies and procedures. **Company Overview:** Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partner brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it! Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us? We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to **************** in lieu of clicking Apply. Please include the job title and location or Job ID # in the email subject line. Keurig Dr Pepper is an equal opportunity employer and affirmatively seeks diversity in its workforce. Keurig Dr Pepper recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law.

Who We Are AVANTech, LLC is a rapidly growing technology company which designs, fabricates, and operates specialty water treatment equipment for government and commercial clients. We solve some of the most challenging problems in the water industry - from being first responders to the Fukushima Nuclear Plant meltdown to implementing patented first-of-its-kind technology for industrial wastewater recycling to cleaning-up legacy wastewater at government sites resulting from weapons manufacturing during the cold war era. AVANTech's goal is to improve the environment around us and support our clients with innovative sustainable water treatment solutions. Benefits of working with AVANTech: Generous paid time off and holidays. Great opportunity for advancement with a growing company. Varied insurance offerings with employer matching. 401(k) savings plan with employer match. Flexible work hours, including 4 day work week. Responsibilities: Install and connect skid wiring from control panel to electrical devices Install rigid and flexible conduit and associated wiring Build electrical panels I.A.W. electrical drawings and project documentation Order electrical materials for project builds Troubleshoot electrical systems including 480VAC, 120VAC, 24VDC and 4-20mA Use P&ID drawings, specifications and AVANTech standards to build and test electrical systems which are safe, meet code, are acceptable to our customers, and meet AVANTech's quality standards Inspect and test assembled components Coordinate factory acceptance testing of complete systems Interact with operators, technicians and engineers to clarify schematics and assembly questions Travel to customer sites, foreign and domestic locations, with no or minimal supervision to complete commissioning in a timely manner; average 1 to 3 weeks per year. Complete miscellaneous maintenance assignments Any other duties as assigned by supervisor What Will Set You Up for Success: Two-year electrical or electronics technical degree or five years of experience or comparable military education Three plus years of electrical installation and troubleshooting experience Panel building experience The ability to read and follow electrical and mechanical prints The ability to read and comprehend component manuals The ability to perform various mechanical tasks Strong knowledge of NEC electrical codes Adaptability to changing project requirements and schedules Critical thinking with exceptional problem-solving skills, able to work independently or in a team environment Additional Requirements All candidates must be able to pass a drug test, pre-employment physical, and background investigation. High awareness of safe working practices and procedures. Job Type & Compensation: Hourly rate is $28 - $38 per hour based on experience Full-time, hourly, nonexempt. AVANTech LLC is an Affirmative Action/Equal Opportunity Employer. View all jobs at this company

Job Description The Electrical Engineer II at Aqua-Chem will be responsible for executing and/or overseeing the design, development, and testing of electrical systems and components, for skid-mounted water treatment process equipment and/or field installed wastewater treatment equipment. Schedule: Monday - Friday | 8:00 am - 5:00 pm Location: Knoxville, TN | On-Site Pay Range: Dependent on Experience | $98,000 - $135,000 Benefits: Group Medical, Dental Vision, 401 (k) Match, Paid Vacation, Paid Holidays, and Paid Sick Time. +Employer Paid Benefits: STD, LTD, Life AD&D Essential Duties: Assists in preparing electrical diagrams, panel drawings, electrical installation drawings, and functional diagrams as well as incorporating changes to drawings. Work with and assist technicians, project engineers, project managers, and aftermarket sales with electrical design, calculations, and hardware specification. Provides customer support, verifying that design and installation conform to customer requirements. Provides direction to Electrical Designers to ensure meeting all customer specifications and all applicable electrical design codes, both domestic and international when required, in particular in the design of control and power panels in accordance with UL508A. Attending company meetings and kick-off meetings. Handle responsibilities with effective interpersonal skills and to effectively interface with others inside and outside the engineering department. Approve drawings/BOMs per established procedures with input from sketches, calculations, specifications, etc. Checking the work of other Engineers, designers, and drafters Training of other Engineers, designers, and drafters Other duties as assigned by Manager/Supervisor Education/Experience: Bachelor's degree in electrical engineering from an accredited university 5+ years of experience in related electrical design desirable Experience with AutoCAD and/or AutoCAD Electrical in the generation of electrical designs Experience with UL508 desirable General knowledge of UL, CE, and IEC standards Requirements: Must be able to work for U.S. employer Working towards FE/CE certification a plus Ability to solve problems using critical thinking, and scientific and analytical skills Effective interpersonal and communication skills working within teams. Able to work overtime as required *This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgment, to be proper. This description supersedes any previous description for this position. This description supersedes any previous descriptions for this position. **Aqua-Chem provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Arconic is currently in search of Electrical Engineering Intern to join our Manufacturing, Technology & Engineering Team based in our Rolled Product North American Locations (Davenport, Iowa, Alcoa, Tennessee & Lancaster, Pennsylvania) for Summer 2026. At Arconic, we take pride in our work and our innovative products and technologies that advance sustainable solutions for a better world. We strive to create a safe, inclusive, and collaborative workplace with competitive benefits, development opportunities and a culture that values and rewards employees on all levels of the organization. About the Program: Arconic's Internship Program offers students the opportunity to apply their academic knowledge to real-world challenges that drive value for our business. This hands-on, minimum 10-week experience includes impactful projects across multiple business functions, allowing interns to lead at least one major initiative. In addition to project work, interns engage in career development discussions with senior leaders and executives, participate in volunteer activities, and building strong connections through cohort-wide events that foster collaboration and camaraderie.

Job Description Electric Utility Market Leader We are seeking an experienced Electric Utility Market Leader to drive business growth and client success within rural electric cooperatives and municipal utilities. This role is a key strategic position, responsible for identifying new business opportunities, cultivating strong client relationships, and overseeing project scoping, design, and construction support for high-voltage transmission, substation, controls, and distribution projects. The ideal candidate combines deep technical expertise in high-voltage power systems with the ability to align business strategies to market needs. Key Responsibilities Market Strategy & Business Development Develop and execute strategic plans to expand into new markets while maintaining and growing existing client relationships. Identify and engage with utilities, EPC contractors, universities, and industrial clients with medium- and high-voltage facilities. Serve as the primary client contact, fostering long-term partnerships and ensuring satisfaction. Proposal & Contract Leadership Lead proposal development for high-voltage power projects in coordination with management and engineering teams. Drive project scheduling, client communications, and team coordination to maintain alignment and timely execution. Sales & Service Leadership Promote multidisciplinary services, including electrical engineering, architectural design, environmental consulting, civil and structural engineering, and surveying, to utility clients. Regulatory & Industry Expertise Stay current on industry regulations, standards, and emerging technologies in high-voltage power systems. Represent the company at trade shows, industry events, and conferences to expand market visibility and identify leads. Project Participation Attend project meetings, perform site visits, track progress, and support communication between clients and internal teams. Qualifications Experience: 10+ years in the high-voltage utility sector, with progressive responsibility in technical and business development roles. Education: Bachelor's degree in Engineering preferred; extensive utility experience without a degree will be considered. Licensing: PE license or ability to obtain licensure is a plus. Technical Expertise: Deep knowledge of high-voltage systems, substations, transformers, system studies, construction inspection, and project management. Skills: Exceptional communication, negotiation, and relationship-building skills. Ability to work independently and collaboratively with cross-functional teams. Proficiencies: Microsoft Office Suite; ability to manage multiple clients and concurrent projects; skilled in documentation and record-keeping. Why This Role Matters This is a high-visibility position for a technical and strategic leader to shape the future of high-voltage power solutions in your region. The role offers the opportunity to combine technical expertise, client relationship management, and strategic growth initiatives to make a lasting impact on the utility industry. Benefits 401(k) with company match Health, dental, and vision insurance 160 hours of annual paid time off 9 paid holidays annually Flexible work schedule, including half-day Fridays Employee assistance programs Flexible spending accounts Life insurance

ABOUT THE ROLE We are seeking a Field Engineer, Electrical to join our team supporting the Uranium Processing Facility! This position is full-time. Responsibilities Support completion of UPF's Electrical system(s). Provide project field engineering specialization and expertise with electrical systems. Exercise judgment related to appropriate electrical codes and standards. Review submittals related to electrical engineering. Support electrical inspection activities. Utilize strong field background related to electrical experience. Assist with recommendations to ensure field engineering activities operate safely, are complete, and conform to quality standards and project requirements Perform the following tasks: Work Planning & Packaging - prepares construction drawings and sketches & facilitates planning construction methods and procedures. Material Management - initiates requisition for field purchases & prepares quantity takeoffs of field purchased material and equipment. Quantities - verifies commodities on quantity tracking systems or other computer database systems as required. Safety / Quality Control - ensures zero accident philosophy and requirements are implemented and adhered to by craft and others when in the operational area & tools and equipment are in safe condition and operated safely. System Turnover - develops firm understanding of electrical system and area scoping and drawings required for package development. Subcontract Coordination - reviews and approves inspection test plans & coordinates reviews of subcontractor submittals. Requirements Education & Years of Experience - High School Diploma and 9+ years of relevant experience or Bachelor's Degree 3+ years of relevant experience. Citizenship - To be considered, you must be a United States (U.S.) citizen due to the federal nature of the work. Clearance - To be considered, you must be able to obtain and maintain a government issued clearance, if needed. Must have a strong electrical execution background (as either an Electrical Superintendent or Field Engineer). Must have a working knowledge of design codes and standards including NFPA 70-2014, NEC, and NQA-1. Experience with DOE, DoD, and/or commercial nuclear construction projects is preferred. Must have strong experience in work execution and field expertise. About the Site The Uranium Processing Facility (UPF) is a construction project at the Y-12 National Security Complex in Oak Ridge, Tennessee that is intended to modernize and replace aging facilities for uranium operations. Once complete, UPF will support the nation's nuclear weapons stockpile, naval reactors, and defense nuclear nonproliferation while ensuring the long-term safety, security, and viability of enriched uranium capabilities in the United States. ( energy.gov ) . Bechtel National, Inc. (BNI), Bechtel's government services business, is one of the top providers to departments and agencies of the U.S. and British governments. Its successes include many large, first-of-a-kind projects in government site management, environmental restoration, defense, space, energy, and national and homeland security. This position will provide support to the Uranium Processing Facility (UPF) located at the Y-12 National Security Complex in Oak Ridge, Tennessee. UPF is a multi-year, multi-billion-dollar project and will be a first-of-its-kind complex for enriched uranium operations in support of Y-12 missions. UPF is one of the Department of Energy's largest investments in Tennessee since the Manhattan Project and one of the National Nuclear Security Administration's largest construction projects. When complete, UPF will: replace a 70-year-old facility with modern buildings, reduce operational costs and energy consumption, improve worker safety, and provide enriched uranium capabilities well into the future. The UPF project works on a 4/10 schedule. Start times are flexible but the standard work week is Monday - Thursday from 7:00 am to 5:30 pm. ABOUT GEM GEM Technologies, Inc. (GEM) is an award-winning federal contractor with more than 30 years of experience providing environmental, construction, facility management, and technical services to federal agencies, state and local governments, and commercial organizations. Founded in 1994 as a nuclear engineering firm to support federal operations in East Tennessee, GEM has since expanded into a nationwide, multi-disciplinary provider with over 270 employees and a diverse portfolio of contracts in the environmental, nuclear, and defense sectors. Some reasons to join GEM are: Our philosophy - We believe in the power of effective collaboration and recognize that good partnerships are the building blocks to success. Our relationships - Partnering with federal clients, we solve complex problems, exceed expectations, and advance critical missions. Our team - We are committed to managing a cohesive workforce and cultivating a supportive workplace for our employees on contracts and in-office. Our community involvement - Supporting our communities, we invest time and money in local schools and non-profit organizations. COMPENSATION AND BENEFITS GEM's offered compensation is dependent on candidates' education, qualifications, and relevant years of experience. To recruit and retain our exceptional staff, we offer the opportunity to elect benefit packages that best suit our employee's needs; this includes, but is not limited to, a competitive Salary, Medical, Dental and Vision Insurance (including HSA & PPO options), Paid Time Off (PTO), Paid Holidays, Life Insurance, and a matching 401(k) Retirement Plan. Please Note : With the exception of mandated state requirements, GEM does not publish salary information on external job boards; as such, most ranges listed are estimates made by vendors and not actual salary ranges. EQUAL OPPORTUNITY EMPLOYER GEM Technologies, Inc. is an Equal Opportunity/Affirmative Action Employer and does not discriminate on the basis of race, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information, veteran status, marital status, pregnancy or related condition, or any other basis protected by law.

Job Description The purpose of this position is to lead the wiring function of the Manufacturing line in the Knoxville facility. This position is responsible for making sure that the units leaving are wired correctly based on the electrical schematics and Design drawings provided by Engineering. RESPONSIBILITIES & DUTIES Read the schematics and compare to Electrical boxes to certify the lines are running correct. Learn, understand and be able to teach and operate the End of Line Tester. Be able to trouble shoot any electrical issues and communicate the corrections in an effective way to prevent the same issues in the future. Teach operators how to read a schematic. Check in house boxes for correct wiring. On occasion be able to travel to customer sites and trouble shoot all electrical issues. Maintain preventative maintenance on End of Line Tester equipment. Emergency assistance when units have issues on the manufacturing line. When needed, provide added training and assistance on the manufacturing line for any items that the person is knowledgeable on. i.e. Electrical testing and /or other applicable areas. Works closely with Electro-Mechanical Technician to accomplish any Electrical Issues and troubleshoot wiring problems. All other duties as assigned. OTHER RESPONSIBILITIES To ensure Kelvion's Standard of Excellence, which includes quality, is incorporated into every product we produce. Follow all company policies and procedures, including but not limited to Global Code of Business Principles, Code of Ethics and Business Conduct, Vision and Values, Operational Framework. REQUIREMENTS (KNOWLEDGE, SKILLS & ABILITIES) Proven mechanical abilities Proven wiring knowledge Detail oriented to make and keep precise, accurate measurements Good communication, interpersonal and writing skills Detail oriented Ability to make and keep the precise, accurate measurements Math skills EDUCATION AND EXPERIENCE (required levels) High school education. One year experience working with an electrical and communication preferred PHYSICAL REQUIREMENTS Ability to bend, lift, stand repetitively throughout the day Ability to lift 50 lbs. repeatedly throughout the day Ability to work with hands on tedious operations PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; reach with hands, arms, and shoulders. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl; and talk and hear. The employee occasionally will be required hand lift and/or move objects up to 50 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

About Us Founded in 1986, Chen Moore and Associates (CMA), Inc. has grown into a highly regarded multi-disciplinary firm. CMA's areas of expertise include utility infrastructure, roadway, site development, electrical, planning, landscape architecture, and construction engineering services for both private and public sector clients. CMA prides itself on working to be part of the fabric of the community. We are leaders in community service and the profession. Our staff and our activities are centered around making the community we work in a better place to live. CMA promotes a fun and flexible work environment, taking pride in the quality of our work. CMA promotes a team-oriented approach, both inside and outside of the office. CMA's headquarters are in Fort Lauderdale with regional offices in Miami, West Palm Beach, Orlando, and Jacksonville. The firm also has satellite and/or project offices in Atlanta, Gainesville, Jupiter, Knoxville, Port St. Lucie, Raleigh, Sarasota, Tallahassee, and Tampa. CMA currently employs over one hundred and thirty (150) professionals, which affords our valued clients a top-level service. CMA is hiring an entry level or early career Electrical Engineer to work in the Power Delivery industry. This position will work on Transmission, Distribution, and Protection & Control projects for municipalities and Investor-owned utilities within the Southeastern United States. Candidates should be able to efficiently plan and organize their workload with their team, demonstrate success working with a team of professionals, a commitment to quality, good communication skills, and a positive work ethic. Responsibilities: Candidate shall work on various aspects of electrical engineering design, plan preparation, permitting and construction oversight while working in a project team environment. Candidate would contribute to projects including collecting existing utility data; performing modeling and simulation; distribution, transmission, substation, protection & controls. Prepare project design drawings within MicroStation and/or AutoCAD. Develop project specific detail drawings. Calculate project construction quantity estimates. Assist with technical specifications, cost estimates, reports, schedules, and other related tasks. Learn and adhere to client-specific standards. Coordinate with team members and client representatives. Periodic travel to project sites for field investigation and or construction support. Project outlines, project initiation, project schedules, project executions, and project closeout. Interface with multi-disciplinary design teams. Qualifications: Must possess a bachelor's degree in electrical or mechanical or environmental engineering. Master's degree is a plus. 0 - 2 years of experience working for a firm in the A/E/C industry. The expectation is that such candidate would be working towards becoming a Professional Engineer (P.E.) Excellent technical writing skills Outstanding organizational skills Strong sense of urgency, project responsibility and initiative Ability to work independently and as part of a team. Excellent verbal, written and interpersonal skills. Ability to quickly learn and apply complex systems. CMA's High Standard of Professionalism Chen Moore and Associates is a company which is unique in its commitment to quality. We are proud of our high standard of professionalism and the quality of service provided to our clients. We strive to establish a sense of pride and loyalty in our employees by maintaining a tradition of excellence in our work and a sense of family in our culture. We also aim to provide an environment that inspires and promotes individuals to reach the full extent of their potential and to continue in their personal “Search for Excellence.” We offer a career opportunity rather than a job - an opportunity that will take our employees as far as they want it to go. You will find that both the management and employees of CMA are dedicated to high achievement and genuinely concerned about employee job satisfaction. In order for us to maintain high standards of excellence, we endeavor to have the finest personnel and only acquire those whom we consider to not only meet the high standards we set for ourselves as a firm, but those who will also blend with the firm culture. Your success is important to all of us. Chen Moore and Associates is a Great Place to Work! Named "Top 500 Design Firm" nationally by ENR Named ‘Best Places to Work For' nationally by the Zweig Group in the Multidiscipline Firm Category from 2008-2010 and 2014-2025. Named to the ‘Hot Firm's List' nationally by the Zweig Group from 2007-2011, 2014, 2016-2025. CMA is regularly recognized as a ‘Best Firm to Work For' by the South Florida Business Journal, Civil + Structural Engineer, ENR Southeast, and various local branches of the American Society of Civil Engineers. OUR BENEFITS include: Medical, Vision and Dental Insurance Life and AD&D Insurance Voluntary Life with Dependent Coverage Short-Term and Long-Term Disability Paid time off and paid holidays Flexible Spending Accounts with Debit Card Voluntary Plans (Supplement Health, Critical Illness/Cancer, Accident) 401(k) Plan - Competitive Employer Match Supplemental benefits Flexible work schedules Continuing education Mentorship programs Professional societies Community engagement Cell phone We thank all applicants for their interest; however, only those selected for an interview will be contacted. Chen Moore and Associates is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. We invite resumes from all interested parties including women, minorities, veterans and persons with disabilities.

Graduate Electrical Engineer Job Type: Full-time, Onsite Qualifications: B.S. in Electrical Engineering or other relevant degree from an ABET accredited school Past experience through co-op or summer internships is helpful E.I.T. certification is a plus 2-3 years of MEP experience preferred Employee Benefits: Competitive salary based on experience and qualifications Medical, Dental, Vision, Life, Disability, and Long-term Care Insurance 401k Retirement plan Opportunities for continued learning Opportunity to contribute to high visibility and high impact projects

Design electrical systems including power distribution, lighting, fire protection, and life safety Develop medium- and low-voltage systems and one-line diagrams Perform load flow studies, arc flash analysis, and power factor correction Design generator, emergency power, and UPS systems Ensure compliance with NEC, NFPA 70E, and applicable standards Coordinate with mechanical, structural, and architectural teams Manage and mentor electrical design staff Produce specifications and construction documents using AutoCAD and Revit Deliver customized engineering solutions tailored to client operations Qualifications Active Electrical Engineering PE license 4+ years of professional electrical engineering experience Strong knowledge of NEC and electrical safety standards Experience with AutoCAD and Revit Background in power distribution, lighting, and life safety systems Ability to lead projects and collaborate within a team environment Why You'll Love Working Here Employee-owned ESOP company with a true ownership mindset Supportive, team-oriented engineering culture Long-term stability without big-corporate bureaucracy Competitive salary and comprehensive benefits Meaningful projects with tangible client impact

Senior Electrical Engineer (Power) At I.C. Thomasson, a Salas O'Brien Company, we tell our clients that we're engineered for impact. This passion for making a different applies just as much to our team as it does to our projects. That's why we're committed to living our values every day: inspiring, achieving, and connecting as shared owners of our success with a focus on a sustainable future. Building for the long-term means that all our team members can expect to work on amazing projects with a people-first approach to problem solving. It also means that each member of our team has truly limitless potential to build unique, meaningful, and high-impact career- and they'll receive great total rewards along the way. Job Summary: The idea candidate to fill this position is an Electrical Engineer that is competent and confident in their ability as an electrical engineer, especially with experience in the power generation and distribution industry. This person would be a Design Lead of multiple projects, work with both internal and external teams to deliver projects that meet the objectives of the owner. Supporting Business Development would also be included in this role. These activities may include soliciting and securing new work, implementation of goals, objectives, and priorities for the Power Generation team, identifying prospective markets and clients, etc. General Duties: Experience in personally developing electrical design packages from a conceptual to IFC level for power generation and distribution including specification of all protective device/relays, instruments, transformers, breakers, alternators, grounding components, and power/control wiring. In-depth understanding of the design limitations and routing of conduit, cable tray, trench duct for high density power applications. Experience with coordinating closely with vendor packagers to develop cost effective and timely design solutions for highly technical applications. ETAP or SKM modelling experience and understanding of systems coordination, arc flash, grounding, and Neher-McGrath. Capability to personally develop one-lines, three-lines, breaker control diagrams, power plans, and systems plans. Strong familiarity with IEEE, UL, NEMA, NFPA standards for renewables, harmonics, generation, energy storage, hazardous area, and industrial systems Take ownership and have ability to read, understand, and review vendor shop drawings for GIS switchgear, substation transformers, DCU/PLC enclosures, Microgrid controllers, and complete generation systems. - Ability to effectively communicate with architects, owners, and contractors Ability to work well independently and as part of a strong team Excellent organization and time management skills Qualifications: BS. in Electrical Engineering 5-15 years of work experience with complex electrical systems in the industrial and power generation sector. Registered Professional Engineering license preferred. Experience with Revit Excellent written and oral communication skills are essential for team-based projects. Excellent planning and organizational skills required for simultaneous project schedules. Highly motivated, proactive, and willing to take on new challenges Willing to travel Location: This role may sit out of any of our office locations. Travel: 10% This role is eligible for performance-based bonuses, and comprehensive U.S. based benefits package, including: Medical, dental, and vision insurance 401(k) with company match Paid time off and company holidays Wellness programs and employee assistance resources Professional development support For more information, visit our full benefits overview here - Salas O'Brien benefits About Us: Founded in 1975, Salas O'Brien is an employee-owned engineering and professional services firm focused on achieving impact for our clients, our team, and the world. We know that tomorrow's requirements are today's opportunities, and we are here to design lasting solutions for pressing challenges. We work across a variety of industries providing integrated engineering and consulting services. Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our technical expertise is paired with an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day. Equal Opportunity Employment Statement Salas O'Brien provides equal opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state/provincial, or local laws. Salas O'Brien will accommodate the disability-related needs of applicants as required by law.

SMSI provides expert management consulting, program and project management, and technical consulting services to government and private sector clients. SMSI has grown and evolved by building an outstanding reputation for client-focused performance and for delivering results that enable clients to meet commitments and milestones. SMSI is an Equal Employment Opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Job Summary: SMSI, LLC is seeking an Electrical Engineer for work on a large capital line-item project supporting NNSA. The work would be performed in Oak Ridge, TN. The Electrical Engineer supports the systems acceptance testing for the electrical engineering discipline. The Electrical Engineer will utilize the systems engineering process providing a foundational knowledge of functional and operational requirements, design criteria, and identification and implementation of applicable codes and standards. The Electrical Engineer will support systems testing, systems acceptance, systems verification and operational readiness. Responsibilities: Prepares systems test plans and procedures. Supports systems acceptance testing. Reviews systems allocation and verification packages for requirement traceability. Develop systems verification packages ensuring requirement traceability. Reviews and validates modification design change packages. Performs field walkdowns supporting electrical start-up engineering. Prepares systems for operational readiness reviews and closeout. Reviews and validates vendor data against systems verification and acceptance plans. Assists system engineers in developing and maintaining technical baseline documents at project closeout. Independently applies extensive and diversified knowledge of principles and practices in broad areas of assignments and related fields. Works on a major project or several projects of moderate scope with complex features. Receives supervision and guidance relating to overall objectives, critical issues, new concepts, and policy matters. Required Skills: 5-10 years of related experience in electrical engineering in nuclear or process chemical industry. Working design experience in nuclear industry/facility is preferred with NQA-1 experience and IEEE, NEC codes and standards. US citizenship is required. Candidate must be able to work onsite in Oak Ridge during regular business hours Monday-Friday. Active DOE Q clearance preferred, but not required. Educational Requirements: A bachelor's degree in engineering or related discipline from an ABET-accredited college or university.

Napakiak Environmental and Construction (NEC) is a leading provider of information technology, technology development, and environmental and construction services, specializing in Federal and Commercial projects. Our company is committed to delivering high-quality solutions that meet stringent regulatory standards and client requirements. Position Overview: NEC is teaming up with a local company seeking qualified applicants for an Electrical Engineer position. This position will primarily work on High Performance Computing (HPC) facilities but will also provide analysis and design support for other ORNL electrical infrastructure projects. The HPC facilities at ORNL are the largest user of electrical power at ORNL, with over 100MW of installed electrical capacity at 7 separate data centers. These facilities require safe and reliable electric power to support the national security and scientific research missions of ORNL. The ideal candidate would have 5+ years of experience in a data center construction/renovation or other power and cooling related infrastructure projects. Job Duties and Responsibilities: Oversee and perform electrical design for HPC facility modifications to support the Oakridge Leadership Computing Facility (OLCF), as well as other HPC customers in the ORNL leased facilities. Oversee and perform electrical design for laboratory modifications, office modifications, and other customer needs in the ORNL leased facilities. Collaborate with ORNL telecommunications, power utility, and facility automation subject matter experts to ensure complete and coordinated installations. Provide technical input and plan review for changes and upgrades to existing facilities. Provide oversight and support to ORNL operations and maintenance craft and construction subcontractors for facility construction and modifications. Perform on-site inspection and approval of all phases of electrical and telecommunications installations. Collaborate with other ORNL and contract A/E disciplines to ensure successful completion of electrical, telecommunications, and I&C installations. Ensure designs and constructed facilities meet occupants' requirements, applicable codes and standards, applicable DOE orders, laboratory safety and quality standards, and leadership objectives. Job Requirements: Required: Bachelor's degree minimum in electrical engineering from an ABET accredited institution. Minimum 5 years working experience including new construction, renovation, plant operations, power distribution, communications, plant automation and SCADA. Demonstrated ability to proficiently communicate in written, verbal, and presentation formats. Preferred: Experience in all voltage distribution Telecom/data fiber distribution experience Experience in UPS/generator system design Demonstrated proficiency with arc flash modeling software (SKM, eTAP, Easy Power) and application of arc flash calculation methods. Education and experience in instrumentation and controls related to facility automation and utility SCADA. Demonstrated proficiency performing electrical and related field studies, construction oversight, commissioning and testing, and detailed project milestone tracking. Working experience with Human Performance Improvement and human factors in design and operations planning. History of successful compliance with a standards-based and procedure-driven work environment. Working experience in secure DOE or related facilities. The ability to: Collaborate on technical issues resolution with research personnel, sponsor organizations, equipment manufacturers, and instrument manufacturers. Provide local construction oversight for safety, design intent integrity, and as-built system surveys. Contribute to configuration control of new and modified facilities and electrical, telecom, and I&C systems. Lead and participate in electrical post-event forensic investigations, contribute to reports, and coordinate with issues management and safety. Teach, coach, and lead team continuous improvement and continuing education, and mentor interns Duration of project: 1-3 years (depending on project workload)

Job DescriptionSummary MS Technology, Inc. is seeking a motivated Electrical/I&C Engineer to support nuclear engineering and technology projects. The selected candidate will support the design, development, testing, and implementation of electrical and instrumentation & control (I&C) systems for complex nuclear and industrial facilities. The role includes responsibility for engineering deliverables, interfacing with clients and project teams, and ensuring compliance with industry standards. Responsibilities Design and develop electrical power systems, instrumentation, and control systems for DOE and commercial nuclear projects. Provide engineering deliverables, including: One-line diagrams, control schematics, wiring diagrams Instrumentation and control logic diagrams Equipment specifications and calculations (e.g., load flow, voltage drop, short circuit, arc flash) Cable schedules and material take-offs Perform power systems modeling and analysis using software tools like ETAP or SKM. Ensure designs are compliant with NEC, IEEE, NFPA, ISA, and other applicable standards. Participate in configuration management, technical reviews, and design verification. Support construction, testing, startup, and troubleshooting activities as needed. Interface with multidisciplinary teams including mechanical, structural, and systems engineering. Assist with estimating and scheduling engineering efforts. Mentor junior engineers, if in a senior role. Minimum Qualifications: Bachelor of Science in Electrical Engineering from an ABET accredited university State of Tennessee Professional Engineer Licensure (or ability to obtain one) Bachelor's degree from a four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience (Entry-level positions). Master's degree or equivalent; or four to ten years related experience and/or training; or equivalent combination of education and experience (Mid-level positions). Nuclear related design (NQA-1, NRTL, etc.) Proficient knowledge of electrical distribution systems at various voltages (120 VAC, 480VAC, 4160VAC, and 13KV) Experience with power analysis design software (ETAP, or SKM Power Tools) Piping & Instrumentation (P&ID) interpretation Capable with Instrumentation selection and datasheet preparation Proficient at Control System Design (PLC, DCS) (Rockwell/Allen-Bradley, Siemens) U.S. Citizenship. Ability to obtain or maintain a DOE “Q” clearance (active clearance preferred). Preferred Qualifications: Professional Engineering (PE) license. Experience with DOE or commercial nuclear facilities. Proficiency with tools such as LabVIEW, MATLAB, PSPICE, OrCAD, Simulink. Familiarity with industrial controls, embedded systems, and system integration. Strong communication, technical writing, and teamwork skills. Additional Skills Excellent customer service and communications skills. Ability to work both independently and as part of a team. Ability to deal with conflicts and stressful situations. Ability to organize, prioritize, and follow multiple projects and tasks to completion. Microsoft Office Word, Excel, PowerPoint, SharePoint. Benefits: All eligible employees enjoy an excellent benefits package, including medical/dental/vision insurance, short/long-term disability, life insurance, 401(k), paid time off including holidays, and tuition reimbursement. EEO Statement: MSTI is an equal-opportunity employer. All qualified candidates, including individuals with disabilities and protected veterans, are encouraged to apply. MSTI is an E-Verify employer. If you have difficulty using the online application system or need an accommodation to apply due to a disability, please email: *******************. EEO Employer/Vet/Disabled Powered by JazzHR 6EzVtYuSPB

MS Technology, Inc. is seeking an Electrical Engineer to support design, development, and integration of electrical systems for complex engineering projects. The Electrical Engineer will design, develop, and oversee the installation and testing of electrical systems and equipment to support facility and process operations. Typical work includes power distribution, instrumentation and controls, and electrical systems supporting specialized facilities and equipment. The ideal candidate will bring at least five (5) years of relevant engineering experience and a strong understanding of applicable industry codes and standards. Responsibilities: Apply engineering principles to design, develop, and test electrical systems and equipment. Develop technical documentation, drawings, and specifications in accordance with project requirements. Collaborate with project managers, designers, and engineers from multiple disciplines to ensure integration and accuracy across design packages. Provide technical input and troubleshooting support during fabrication, installation, and commissioning phases. Ensure compliance with applicable electrical, safety, and design standards (e.g., NEC, NFPA, IEEE). Familiar with a variety of the field's concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of complex tasks requiring creativity, problem-solving, and attention to detail. A wide degree of creativity and latitude is expected. Education/Experience: Bachelor's degree in Electrical Engineering or related discipline required. Minimum of five (5) years of related experience in electrical design, facility systems, or industrial project environments. Master's degree or equivalent; or four to ten years related experience and/or training preferred. Professional Engineer (PE) certification preferred. DOE Q-Clearance preferred or ability to obtain. Additional Skills: Strong customer service and communication skills. Ability to work both independently and collaboratively in a team environment. Skilled in managing multiple priorities and resolving conflicts in fast-paced settings. Proficient in Microsoft Office (Word, Excel, PowerPoint, Access, SharePoint). Experience with AutoCAD, Revit, or other electrical design software is a plus. Benefits: All eligible employees enjoy an excellent benefits package, including medical/dental/vision insurance, short/long-term disability, life insurance, 401(k), paid time off including holidays, and tuition reimbursement. EEO Statement: MSTI is an equal-opportunity employer. All qualified candidates, including individuals with disabilities and protected veterans, are encouraged to apply. MSTI is an E-Verify employer. If you have difficulty using the online application system or need an accommodation to apply due to a disability, please email: *******************. EEO Employer/Vet/Disabled

At Strata-G, we define significance by the extraordinary people we hire, the relationships we build with our clients, and the positive impact we make in the community. Our team of intellectually curious and highly motivated engineers, scientists and business professionals engages with our clients to solve complex energy and environmental challenges around the world. We are driven by our values to create a culture of significant and positive change for our clients and the world. We Care We treat our customers and employees as we wish to be treated. Integrity We are honest and ethical in every endeavor. Service We continuously strive to please our customers and to exceed their expectations. Quality We maintain a culture of continuous improvement. Safety We hold paramount the safety and health of our associates, our customers, the public, and the environment. Innovation We develop creative solutions to better serve our customers. Attitude We maintain a positive attitude and value humor. Outreach We share the results of our successes with the community. Strata-G is seeking an experienced Electrical Engineer: Arc Flash with the following: Position Summary You will play a critical role in safeguarding our facilities and personnel by conducting comprehensive arc flash hazard analyses and implementing risk mitigation strategies. Concurrently, you will collaborate with cross-functional teams to identify and execute process optimization initiatives, enhancing overall system reliability, quality, and efficiency. Key Responsibilities Conduct Arc Flash & Power System Studies: Perform detailed arc flash, short circuit, and protective device coordination studies in compliance with NFPA 70E, IEEE 1584, and OSHA standards. System Modeling & Documentation: Develop and maintain accurate electrical system models and single-line diagrams using specialized software like SKM PowerTools, ETAP, or EasyPower. Mitigation & Safety Implementation: Analyze study results to recommend engineering controls and administrative solutions (e.g., proper PPE levels, warning labels, updated maintenance procedures) to reduce incident energy levels and enhance safety protocols. Process Optimization: Collaborate with manufacturing, maintenance, and IT teams to identify process bottlenecks, diagnose electrical failures, and implement upgrades that improve uptime, quality, and reliability. Training & Collaboration: Support the development and delivery of electrical safety training programs for staff and collaborate with project managers to ensure data accuracy and successful project delivery. Compliance: Ensure all electrical designs, modifications, and installations adhere to relevant industry codes and standards, including NEC, NFPA, ANSI, and UL. Qualifications & Skills Education: Bachelor's degree in Electrical Engineering from an ABET-accredited program. Experience: [5-10] years of experience in an industrial or manufacturing environment, with demonstrated experience in arc flash analysis and process improvement initiatives. Certifications: Professional Engineer (P.E.) licensure is highly preferred; relevant safety certifications (e.g., OSHA 30-Hour, CESCP) are a plus. Technical Proficiency: Expertise in power system analysis software (SKM, ETAP, EasyPower). Strong knowledge of safety regulations (NFPA 70E, OSHA). Experience with PLC/HMI programming, AC/DC drive systems, and data acquisition software is desirable. Proficiency in AutoCAD or similar drafting tools. Soft Skills: Excellent analytical thinking, attention to detail, and communication skills to effectively translate complex technical information to diverse audiences. Job Type: Full-Time Job Location: Oak Ridge, TN. No remote or hybrid options. Strata-G will not sponsor applicants for immigrant or non-immigrant work visas. The successful candidate will be required to submit evidence of identity and employment authorization. Tests for the absence of any illegal drug as defined in 10 CFR 707.4, will be conducted by Strata-G and a background investigation by the Federal government may be required to obtain an access authorization prior to employment. Strata-G is an Equal Employment Opportunity (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, national origin, age, gender identity, protected veteran or disabled status. All job descriptions are evaluated for physical/mental standards prior to posting based on AAP guidelines.

REAL ALLOY is the market leader in third-party aluminum recycling and specification alloy production. Headquartered in Cleveland, Ohio, we have 17 plants strategically located across the United States, Mexico, and Canada. We convert aluminum scrap and by-products into reusable aluminum metal for a growing number of applications across various industries. We are ideally positioned to respond to the needs of an increasingly recycling-conscious world. Advanced technologies enable us to process a large variety of scrap and dross and reduce the amount of residual waste from aluminum manufacturing that would otherwise end up as landfill. Responsibilities REAL ALLOY Electrical Engineer As our new Electrical Engineer, you will be based out of our Morgantown, KY plant facility. Use your knowledge of Manufacturing Process Networks and Machine Control Systems to technically support these manufacturing locations, deploy process improvements, integrate new capital equipment, and execute standardization initiatives within the business. Electrical Engineer candidates will have significant knowledge of process control equipment, flow measurement, power distribution, a passion for new technology, and excellent communication skills. Heavy Industrial experience is required. Our ideal Electrical Engineer candidate will service their main location and provide Electrical Engineer support to these regional locations, with travel required of up to 30% for the role. Steele, Alabama Loudon, Tennessee Full compensation for this position starts at 100K plus per year Qualifications Electrical Engineer- Bachelor of Electrical Engineering, Electrical Engineering Technical degree, or other related degree/experience Minimum three to five years' experience in a manufacturing environment, process control, and engineering Programming and application knowledge in Allen Bradley PLC's (RSlogix500 and Studio5000) HMI platform knowledge and programming capability (Redlion, and Ignition Preferred. Will consider other platforms such as RSView, Wonderware, Panel View) AC Variable Frequency Drives programming and application experience (ABB Drives preferred) Programming experience in SQL, Python, C+, or Visual Basic AutoCAD or AutoCAD Electrical Experience preferred Knowledge of low voltage power distribution thru 480VAC Experience with Industrial Ethernet Networks The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not construed to be an exhaustive list of all job duties performed by the personnel so classified. Equal Opportunity REAL ALLOY is an equal opportunity employer and supports diversity in the workplace. Qualified applications will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Our HR teams will reach out to the applicants who met the qualifications and most closely aligned with requirements of the positions.

Process Control Engineer - Knoxville - 2500035K Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials, including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. New Graduate OpportunityWe are hiring a Process Control Engineer in Knoxville, TN! The Process Control Engineer (PCE) under the supervision of an experienced Process Control Engineer, will provide process control design services at all levels of detail, from conceptual design through final installation for all construction materials facilities, with increasing responsibility as experience is gained. Develop Programmable Logic Controller (PLC) and Human-Machine Interface (HMI) programs to control aggregate facilities, assuming increasing responsibility as experience is gained. Assist the Corporate Network Services (CNS) Department in the installation and configuration of plant networks, wireless systems, and firewalls. Serve as the Corporation's representative to interface with and provide technical guidance to system integrators and construction contractors. Provide cost estimates and project schedules for capital and expense projects as needed, with increasing responsibility as experience is gained. Assist in supporting existing facilities and assisting in upgrading existing control systems. Assess needs and internal resources available to perform the required tasks and coordinate the use of outside contractors as necessary. Must gain knowledge of current methods, best practices, and code standards, including NEC, NFPA, IEEE, and NEMA relating to assigned work. Prepare purchase requisitions for process control equipment. Provide input to the creation and modification of Corporate Standards, Specifications, and Policies. What You'll Do:Cost Estimating: Under the supervision of a PCE IV or higher, provide electrical cost estimates for proposed new facilities and plant modifications. These estimates will include costs for PLC and HMI systems, related software, and installation costs. Engineering Design Services: Under the supervision of a PCE IV or higher, provide complete process control design for aggregate, asphalt, and ready-mix facilities. Design shall include ladder logic, HMI, plant networks, and control schematics. Provide technical supervision in formulating calculations, evaluations, feasibility studies, and optimum design criteria for plant electrical integrity, reliability, and endurance. Services provided are conceptual operating plans, detailed layouts, and equipment selections. Project Management: Under the supervision of a PCE IV or higher, provide project management activities on projects working with internal personnel as well as outside contractors, developing schedules and goals to meet milestone requirements. Project Review: Participate in the review of capital and expense projects pertaining to design correctness, feasibility, and cost for the sections of the project related to process control. Standardization and Innovation: Participate in the standardization of projects and databases for both engineering and estimating information. Maintain an awareness of technology trends in the electrical and instrumentation industry and the application thereof by competition and others. Analyze future plant control systems and apply new technology and original innovation to attain competitive superiority where possible. Qualifications Skills You'll Need:Education:Bachelor's Degree in Electrical Engineering, Mechatronics, or related field preferred; or equivalent combination of education, training, and experience. Experience:0 to 3 years of experience in the design and installation of heavy industrial control systems is desired, preferably in aggregates or related industries. Identifying electrical problems, troubleshooting, and field installation experience. Experience with using AutoCAD is desired but not required. Additional Qualifications:Ability to understand basic software (Excel, Word, PowerPoint) and use a computer is required. Knowledge of Allen Bradley, GE, Wonderware, and Historian Software systems is desired but not required. Knowledge of SQL Server and other reporting software is a plus. Knowledge of industrial control systems, and computer, PLC, and HMI, programming. Knowledge of computer networking is desired but not required. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts daily lives - and every employee contributes. Our aggregates are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. Job: Engineering Primary Location: Tennessee-Knoxville Organization: GM - CND DIV OH Schedule: Full-time Job Posting: Dec 5, 2025, 4:16:15 PM

Merrick & Company is looking for an experienced Senior Electrical Engineer for our Oak Ridge, TN project office. This position supports Nuclear Services and Technology (NST) projects related to Department of Energy (DOE) and various commercial and private clients. Client projects for this position require U.S. Citizenship. The NST team specializes in the design of prototype/one-off custom equipment, gloveboxes, hot cells, specialty research equipment and custom-designed, remotely-operated mechanisms for handling radioactive and hazardous materials. Additional specialization includes the design of moderate hazard non-reactor nuclear facilities and facility upgrades. Typical annual pay range for this position is $120,000 - $150,000. Pay offered may vary depending on job related knowledge, skills, and experience. WHAT YOU'LL DO The preferred candidate will have experience and a passion for electrical and power design, be nimble in accepting a wide range of assignments both nuclear and non-nuclear, and enjoy a team design environment. Relocation assistance may be provided as part of the overall compensation package. The Electrical Engineer position is responsible for electrical design projects and supervision of other Electrical Engineers and Designers and their work products. Work involves a variety of activities including conceptual and detailed design of low voltage and medium voltage power distribution, lighting, grounding, motor control systems, process equipment and instrumentation. Individual will be required to perform non-routine assignments with little or no direction. * Lead design development and production of design documents including drawings, narratives, and specifications * Provide technical guidance and perform reviews of fabrication and construction documents * Interface directly with client by attending client meetings and making presentations to clients * Perform design reviews for compliance with electrical codes * Recommend, communicate, and coordinate design changes to clients and other disciplines * Perform project quality assurance/quality control, including independent technical reviews and interdisciplinary coordination reviews * Perform fabrication and construction observation/administration * Create and manage schedule and budget estimates for electrical design, fabrication, and construction aspects of projects * Supervise, lead, manage and mentor a team of electrical engineers and designers * Problem solve, guide and mentor staff * Assess employee performance * Participate in hiring process of new electrical staff REQUIRED QUALIFICATIONS * Degree Requirements: Bachelor of Science in Electrical Engineering from an ABET accredited university * Twelve (12) years progressive experience, minimum * Professional Engineering Licensure required: State of Tennessee PE (or ability to obtain TN license) * Nuclear related design (NQA-1, NRTL, etc.) * Electrical calculations (power distribution, fault circuit analysis, lighting, grounding) * Work in DOE environment * Working knowledge of CAD based design platforms. * NEC, ISA, IEEE Regulatory Codes * The client projects for this position requires US Citizenship DESIRED QUALIFICATIONS * SKM or ETAP experience PERKS * Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. * Robust Employee Referral Program. * Annual performance and compensation reviews. * Professional Training and Development. * Employee Recognition Awards. * Peer Mentor Program * And Much More! ADDITIONAL INFORMATION * Apply online only. No e-mail, hard copy or third-party resumes accepted. * At Merrick, every resume is carefully reviewed by our team of experienced human recruiters-never by AI. We are committed to a fully human-centered hiring process, ensuring each candidate receives thoughtful, personalized attention at every stage. * Merrick & Company offers a competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). * Merrick is an Equal Opportunity Employer, including disability/vets. * Employment with Merrick is contingent upon completion of a pre-employment background check, MVR check, and drug screen. * Degree Requirements: Bachelor of Science in Electrical Engineering from an ABET accredited university * Twelve (12) years progressive experience, minimum * Professional Engineering Licensure required: State of Tennessee PE (or ability to obtain TN license) * Nuclear related design (NQA-1, NRTL, etc.) * Electrical calculations (power distribution, fault circuit analysis, lighting, grounding) * Work in DOE environment * Working knowledge of CAD based design platforms. * NEC, ISA, IEEE Regulatory Codes * The client projects for this position requires US Citizenship The preferred candidate will have experience and a passion for electrical and power design, be nimble in accepting a wide range of assignments both nuclear and non-nuclear, and enjoy a team design environment. Relocation assistance may be provided as part of the overall compensation package. The Electrical Engineer position is responsible for electrical design projects and supervision of other Electrical Engineers and Designers and their work products. Work involves a variety of activities including conceptual and detailed design of low voltage and medium voltage power distribution, lighting, grounding, motor control systems, process equipment and instrumentation. Individual will be required to perform non-routine assignments with little or no direction. * Lead design development and production of design documents including drawings, narratives, and specifications * Provide technical guidance and perform reviews of fabrication and construction documents * Interface directly with client by attending client meetings and making presentations to clients * Perform design reviews for compliance with electrical codes * Recommend, communicate, and coordinate design changes to clients and other disciplines * Perform project quality assurance/quality control, including independent technical reviews and interdisciplinary coordination reviews * Perform fabrication and construction observation/administration * Create and manage schedule and budget estimates for electrical design, fabrication, and construction aspects of projects * Supervise, lead, manage and mentor a team of electrical engineers and designers * Problem solve, guide and mentor staff * Assess employee performance * Participate in hiring process of new electrical staff