Electrical engineer jobs in Lancaster, PA - 152 jobs

we are seeking a skilled Power Electronics Engineer with strong experience in power electronics design, inverters, and motor control systems. The ideal candidate will have hands-on expertise in hardware design, simulation, prototyping, and testing of power electronic circuits, with a solid understanding of thermal performance and diagnostic instrumentation. Key Responsibilities: Design and develop power electronics front-end circuits and inverter systems Work on IPM motor control and associated power stages Perform simulations and analytical modeling of power electronic circuits Develop and support Hardware-in-the-Loop (HIL) platforms for power electronics validation Design, prototype, and test hardware assemblies Analyze and select inverter switching devices (IGBTs, MOSFETs, etc.) Perform thermal calculations, characterization, and reliability analysis of power structures Conduct hands-on testing using measurement and diagnostic instrumentation Collaborate with cross-functional teams including firmware, mechanical, and systems engineering Support troubleshooting, validation, and design optimization activities Required Qualifications: Bachelor's degree in Electrical Engineering, Electronics Engineering, or a related field 5+ years of experience in power electronics design and development Strong knowledge of inverters, switching devices, and power stages Experience with IPM motor control systems Proficiency in power circuit simulation and analysis Hands-on experience in hardware design, prototyping, and testing Experience using measurement and diagnostic instruments (oscilloscopes, power analyzers, multimeters, etc.) Understanding of thermal design, calculations, and characterization Preferred Skills (Nice to Have): Experience with HIL platforms and validation environments Familiarity with automotive, HVAC, or industrial power electronics systems Knowledge of relevant safety and compliance standards Work Environment: Onsite role based in New Freedom, PA Hands-on engineering lab and prototype development environment

Job Title: Project Engineer Key Responsibilities Lead and take end-to-end ownership of the New Product Introduction (NPI) process, coordinating cross-functional teams to plan, execute, and successfully launch new manufacturing programs. Oversee project schedules, budgets, and deliverables to ensure alignment with customer requirements and organizational goals. Act as the primary customer interface for project-related communication, providing status updates and reinforcing the company's reputation as a dependable and high-quality supplier. Deliver consistent and detailed project updates to internal stakeholders, including engineering, operations, quality, and executive leadership, across all phases of the project lifecycle. Identify, evaluate, and proactively mitigate risks related to technical feasibility, cost, quality, safety, and delivery performance. Develop and implement efficient and reliable manufacturing processes that meet or exceed product specifications and quality standards. Prepare, maintain, and manage detailed engineering documentation such as CAD models, Bills of Materials (BOMs), routings, standard rates, PFMEAs, work instructions, and quality control plans. Partner with Tooling Engineers and Design teams to design, validate, and implement custom tooling solutions and inspection gauges. Support continuous improvement initiatives and contribute to the development of innovative manufacturing processes and advanced technologies. Qualifications & Ideal Candidate Profile Bachelor's degree in Mechanical Engineering, Industrial Engineering, or a related field. 5-7 years of project management experience within a manufacturing environment, with a proven track record of successfully launching complex products. Practical experience with manufacturing processes including laser cutting, press brake forming, metal stamping, MIG and projection welding, and complex mechanical assemblies. Working knowledge of Geometric Dimensioning and Tolerancing (GD&T). Familiarity with PFMEA, APQP, and PPAP methodologies. Proficiency in SolidWorks and CAD-based sheet metal design. Understanding of Lean Manufacturing principles and/or Six Sigma methodologies.

Who We Are: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets including Defense, Aerospace, High-Performance Computing, Power Electronics, Medical and HVAC industries. We provide thermal products and engineering services to the world's leading defense and commercial companies such as Intel, Hewlett Packard (HP), GE Healthcare, Google, Facebook, Lockheed Martin, Raytheon, Northrop Grumman, Boeing, and General Electric. We also conduct advanced research and development work for government agencies including NASA, DOD, and DOE. Our products and technologies have become integral parts of numerous mission-critical devices, from life-saving MRI and CT scanners to energy-efficient building HVAC systems to weather and telecommunications satellites. ACT is strongly committed to our customers, employees, and our community. Innovation, Teamwork and Customer Care are our core values that drive the continuous growth of our company. Our skilled and dedicated staff is our strongest resource and the critical factor in our ongoing success. Position summary: The Product Development Electrical Engineer supports various phases of projects ranging from concept generation and initial design all the way through final hardware delivery and volume production. The types of projects vary from exploratory trade studies to highly detailed electro-mechanical systems, to the fabrication of complicated prototype assemblies and testing. As a member of the Product Development department the Electrical Engineer will be engaged in work related to the design of motor controller systems including the development of new electrical schematics, revision to legacy schematics, research of new electrical components and materials, and review of electrical harness & panel area designs and work instructions. At any given time, the Electrical Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Candidates that have a strong technical background with hands-on experience developing complex controls hardware excel at this position. Responsibilities Include: * Motor drive electrical system design and component selection * Design of electrical system safety features including circuit breakers, overload devices, etc. * Specification of motor, fan, and valve control componentry * PLC hardware selection and programming (experience with Phoenix Contact hardware and PC WORX software a strong plus) * Electromagnetic Interference (EMI) analysis, design and testing (Familiarity with MIL-STD-461) * Assist and approve production electrical panel test procedures for test technicians * Creation and revision of complex electrical schematic details * Creation and revision of numerical and 3-D models of electrical components * Creation and recommendations for electrical packaging solutions * Recommendation and continuous improvements to electrical test fixtures and procedures * Review of work instructions and procedures for proper control panel assembly * Assistance with employee training and cross-training employees for production flexibility * Utilization of information from vendor drawings, catalogs, technical manuals, etc. * Fabrication procedure and work instruction development * Working with a multidisciplinary group of engineers and technicians * Managing program schedules and budget as needed * Frequent customer communication The ideal candidate will possess the following qualities: * Initiative: Product Development engineers don't have a daily agenda given to them and are expected to take it upon themselves to work closely with customers, vendors and ACT personnel to fulfill projects goals and objectives. * Technical Knowledge: We are looking for a candidate who has a strong academic engineering background, coupled with hands-on skills and fabrication and testing capabilities. * Teamwork Skills: As a member of the product development team, the ideal candidate must have the ability to give and receive encouragement and constructive criticism, communicate effectively, and work cooperatively with team members to achieve common goals. * Critical Thinking Skills: The product development customer and projects vary widely, and the strategies and design approaches that worked for one program may be completely different for the next opportunity. Because of that, we need a curious individual who loves to dive in, experiment, and develop innovative solutions to new challenges. * Desire to Grow: The ideal candidate wants to be the best at their job and is never content with "good enough". They set lofty goals and constantly seek to improve themselves and expand their professional knowledge and skillset. They desire to sharpen their engineering and project management skills and grow in leadership ability and responsibility. ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. Requirements * US citizenship or permanent residency strongly preferred due to ITAR requirement * B.S. or M.S. degree in Electrical Engineering or related STEM field. * Proficiency in using Microsoft Office, SolidWorks, AutoCAD, Microsoft Project, MRP Systems, and PLC programming languages (PC WORX or PLCnext preferred) * 3+ years of hands-on experience with design, fabrication, and testing of motor controllers, complex electrical circuits, PLC systems or other relevant controls system experience * Strong problem-solving ability and desire to iterate complicated solutions * Good verbal and written skills

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** The **Electrical Engineer** will be responsible for leading the design, development, and evaluation of complex electrical systems and components for the Live Event Industry. You will collaborate closely with cross-functional teams, provide technical leadership, and play a pivotal role in the execution of projects that drive innovation and excellence in the field of electrical engineering. If you are a dynamic engineer with a proven track record, we invite you to join our team and contribute to our mission of delivering cutting-edge solutions. **Essential Responsibilities / Accountabilities** + Design control systems which meet or exceed client specifications while providing maximum value for our portable and fixed install clients. + Work with a lead designer to or directly performs engineering analyses of electrical loads, component layout, and functional safety of the control system. + Perform optimization and value engineering reviews of both existing and new equipment for improvements in manufacturing cost and efficiency. This includes the research and specification of components from industry manufacturers for electrical designs. This also includes re-use and modification of existing designs. + Prepare bills of materials for finished electrical assemblies and assist in the procurement of outside vendor parts and services. + Central responsibility in the creation of finished electrical assembly and fabrication drawings, contribution to O&M manuals, and final client submittal packages. + Continue to expand our application of emerging technologies for the purpose of designing and producing leading edge controls technology. + Adhere to all company safety policies and procedures. + Attend meetings, seminars, and training sessions as required. + Perform assigned duties according to the policies and expectations prescribed by the company. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodations may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Behavioral Competencies** + **Problem-Solving:** Proficiency in analyzing and solving complex electrical engineering challenges, using innovative approaches when necessary. + **Technical Excellence:** A track record of advanced technical knowledge and expertise in electrical engineering principles and practices. + **Communication:** Effective communication skills, both verbal and written, for conveying technical information to team members, stakeholders, and non-technical audiences. + **Project Management:** Strong project management skills, including the ability to plan, coordinate, and execute electrical engineering projects effectively. + **Leadership:** Demonstrated ability to lead and mentor teams of engineers, providing guidance and direction on complex projects. + **Collaboration:** The capability to work seamlessly with cross-functional teams, including engineers from other disciplines and project managers, to achieve project objectives. + **Adaptability:** Being open to adopting new technologies, methodologies, and industry standards and adjusting strategies to meet evolving project requirements. + **Safety Focus:** Demonstrated dedication to adhering to safety protocols and guidelines to maintain a safe working environment for self and colleagues. + **Innovation:** A commitment to exploring and implementing innovative solutions in electrical engineering to drive continuous improvement and competitiveness. + **Mentorship:** A willingness to mentor and support junior engineers, fostering their professional growth and development within the field of electrical engineering. **Minimum Qualifications** + BS in Electrical Engineering, Technical Theatre with emphasis in Electrical Design, or High School Diploma/GED and equivalent work experience listed below. + 2+ years in Electrical Design and Engineering with formal degree + 4+ years in Electrical Design and Engineering without formal degree + Intermediate level of CAD experience required + Knowledge and experience in: + UL508A and NEC/NFPA concepts + Industrial control system knowledge (IE PLC's and VFD's) + Beckhoff knowledge is a plus + Siemens knowledge is a plus **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.). **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes, safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location + Must able to view and complete project work on a computer monitor or equipment screens for extended periods of time \#LI-AW1 TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

You are a P.E. with a B.S. in Electrical Engineering and 15+ years of hands-on experience . You have a comprehensive understanding of electric utilities (investor-owned, public power, and/or cooperatives) . You are already an expert. Robson Forensic will train you to be a forensic expert. As an Electrical Engineer - Electric Utilities Expert , you will: Investigate incidents involving design, construction, operation, and maintenance of electrical systems, equipment, and devices. Analyze applicable federal, state, and local laws, rules, regulations, codes, standards of care, and safety aspects. Write clear, scientifically sound reports. Provide expert testimony . You will delve into the "why" behind incidents, critically assessing decision-making, operational practices, and the standard of care. This role offers you a chance to: Use your cumulative training, experience, and critical thinking skills . Collaborate with highly respected experts . Continuously learn and grow. Make a tangible difference. LOCATIONS : Miami Lakes/Palm Beach Gardens, FL, Atlanta, GA, Las Vegas, NV, Dublin, OH, Lancaster, PA, Irving, TX REQUIREMENTS : You have a Bachelor's degree in Electrical Engineering. You are a licensed Professional Engineer (P.E.) You have 15+ years of electrical engineering experience, including experience with electric utilities (investor-owned, public power, and/or cooperatives). Your expertise includes design, construction, operation, & maintenance of electrical systems, equipment, & devices. You have thorough knowledge of federal/state/local laws, rules, regs, codes, standards of care, & safety aspects. Your project management experience is a plus. You can work both independently and as part of a collaborative team. You have excellent technical, analytical, writing, and communication skills . You are willing to travel about 20% on average. You have a valid driver's license and the ability to drive. Prior forensic experience is not required . We seek professionals eager to apply their deep industry knowledge to a challenging new domain. ABOUT US: Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines. Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy. We are an Equal Opportunity Employer. HOW TO APPLY: If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience.

Electrical and Instrumentation Engineer - Full-time Required Qualifications: Minimum Bachelor's degree (B.S.) Five (5) years of related experience and/or training in Electrical Engineering, P&ID drawings, plant process development, and instrumentation Use of AutoCAD P&ID and AutoCAD Electrical or equivalent software package Experience with material handling and pneumatic conveying Electrical instrumentation background or experience Job Description Design, specification, and application of electrical devices including control panels, motors, and instrumentation in engineering contracts Designing, sizing, and selecting electrical equipment and control systems for projects in accordance with the project specifications and budget Produce and maintain project P&ID drawings Define and specify electrical control schematics for engineered systems and equipment packages Produce electrical drawings (Panel Layout and PLC I/O) for standard components as well as custom solutions for engineering contracts as needed Review and verify electrical control schematics produced by sub-supplier/third-party vendors Develop a sequence of operation/logic narratives for PLC logic and HMI screen programming Prepare PLC programming and HMI screens for project control systems as needed Develop and maintain project motor and instrument lists Coordinate all electrical and instrumentation design and scope of supply requirements with relevant customer and sub-supplier/third-party vendor counterparts Ensure that all required project technical documentation are complete and meet the customer's requirements from an electrical and instrumentation perspective Develop and maintain internal electrical and instrumentation standards Direct and participate in control systems FAT testing Support Production/Assembly activities with electrical shop testing of equipment packages prior to shipment Resolve all customer complaints related to assigned projects in a timely and cost-effective manner Provide sales support and project feedback as required Develop and create start-up and commissioning plans for customer contracts Support start-up activities at customer sites as needed Benefits: Outstanding compensation and benefits package! Profit sharing and bonus plans! Health/Dental/Vision Insurance! Company match 401(k)! Tuition reimbursement and employee assistance program! Health Club reimbursement and wellness program

Job Description What to Expect: Individual and Cross Functional Projects Throughout 2026 Internship Professional Career Development & Community Outreach Opportunities Final Project Overview Presentation with Executive Leadership Team Fenner Precision Polymers has an exciting internship opportunity in the CI Ops Engineering Team. Assignments may extend to any of our Lancaster county plant locations. As part of the CI Ops Engineering Team, you will: Understand the requirements of executing Capital Engineering projects. Assisting with the execution of key project milestones and deliverables. Utilization of our project governance model and the importance of project tracking and communication of the status with key stakeholders. Participate in design collaboration and machine development with Fenner and its partners. Develop an understanding of Continuous improvement and LEAN manufacturing principles. Core Competencies Required Team work, good communication skills, responsible, eager to learn, strong work ethic. Ability to use auto cad and or solid works Basic understanding of Microsoft Office products Studies that align with either Mechanical, Industrial or Controls Engineering programs. Education and/or Relative Experience: A minimum of 1 year of college or technical school in a related field. Exposure to Manufacturing either through past full or part time employment or as part of the program they are enrolled in is a plus.

What to Expect: Individual and Cross Functional Projects Throughout 2026 Internship Professional Career Development & Community Outreach Opportunities Final Project Overview Presentation with Executive Leadership Team Fenner Precision Polymers has an exciting internship opportunity in the CI Ops Engineering Team. Assignments may extend to any of our Lancaster county plant locations. As part of the CI Ops Engineering Team, you will: Understand the requirements of executing Capital Engineering projects. Assisting with the execution of key project milestones and deliverables. Utilization of our project governance model and the importance of project tracking and communication of the status with key stakeholders. Participate in design collaboration and machine development with Fenner and its partners. Develop an understanding of Continuous improvement and LEAN manufacturing principles. Core Competencies Required Team work, good communication skills, responsible, eager to learn, strong work ethic. Ability to use auto cad and or solid works Basic understanding of Microsoft Office products Studies that align with either Mechanical, Industrial or Controls Engineering programs. Education and/or Relative Experience: A minimum of 1 year of college or technical school in a related field. Exposure to Manufacturing either through past full or part time employment or as part of the program they are enrolled in is a plus.

Cannonball Recruiting is seeking a highly motivated Designer to join the team of professionals at a manufacturing facility for the food and beverage industry in York, Pennsylvania. This position will be responsible for the design of electrical and electro-mechanical assemblies for high speed automation, including robotics. The right candidate will provide support to our engineering department through innovative ideas. Requirements: 2-year associates degree (A.S.) in Electrical Engineering or 5 years progressive experience Proficiency with a 2D drafting package: AutoCAD, AutoCAD Electrical, Autodesk Vault a plus Proficiency with Microsoft Word, Microsoft Excel and Microsoft Outlook Knowledge of basic electrical system design and components such as contractors, fuses, relays, terminal blocks and transformers Capable of independently solving problems and bringing the problems to resolution Knowledge of various types of electrical components and assemblies such as VFD's, PLC's and Sensors Well organized and detail oriented Must be able to work in a team environment Must effectively communicate with employees, vendors and clients Knowledge of basic electrical engineering principles a plus Limited travel required for site evaluations Position may require applicant to come in contact with raw and processed food/beverages including red meat/pork, gluten, nuts and seeds, eggs, flour, milk, yeast and alcohol UL 508A MTR certification or willing to obtain Job Duties: Design and detail of equipment electrical parts and systems Design of panel layouts and interconnection diagrams Support research and development of new equipment through imagination and original ideas Create economical assemblies with safety and durability as the key ingredients Interpret and integrate electrical drawings/models from clients and vendors Detailing (drafting) of equipment electrical parts and systems Detailing (drafting) of panel layouts and interconnection diagrams Purchase components associated with projects Support electrical department change requests Interact with vendors to determine application of technology updates Troubleshoot equipment issues during shop assembly Benefits: Healthcare/Dental/Vision Plans Company Paid Life Insurance Voluntary Supplemental Life insurance - (employee and dependents) 401(k) Savings Plan Education Reimbursement Program Paid Holidays

At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven". We have been in business for 110 years and we are known for our quality work and quality employees. This is your chance to join our team - help us to design the infrastructure and buildings that improve the world! Whitman, Requardt, & Associates (WRA) is currently seeking an entry-level Instrumentation and Control (I&C) Engineer to join our York, PA office. You'll work closely with senior engineers to support the planning, design, programming, and construction of Supervisory Control and Data Acquisition (SCADA) and industrial control systems for water and wastewater facilities. This position offers an introduction to the world of industrial automation and process control, with opportunities to learn system design, PLC/HMI programming, network communications, and cybersecurity best practices within water/wastewater critical infrastructure. Responsibilities: * Work in a collaborative environment to assist senior engineers in the design of I&C systems. * Prepare control system and SCADA design drawings: * Process & Instrumentation Diagrams (P&IDs) * Control panel layouts * Schematic wiring diagrams * I/O point wiring diagrams * Network architecture diagrams. * Develop written process control and functional narratives. * Prepare specifications for control and SCADA system components and equipment. * Prepare engineering construction cost estimates. * Coordinate with electrical and mechanical engineers to support the design of control and SCADA systems. * Inspect, test and commission control and communications systems in industrial environments. * Coordinate and review construction submittals and requests for information with control system integrators. * Design and program PLC based control systems using Allen-Bradly, Modicon, and other PLC based control systems. * Understand Program Operator Interface (OIT) and HMI graphical programming applications. * Perform field inspections, testing procedures and commissioning control systems. * Demonstrate Cyber-Security practices. * The I&C Engineer will need to be able to travel occasionally (10%) to local area construction sites. Work on site include perform field investigations and witness factory and site acceptance testing. Requirements: * Bachelor of Science Degree in Electrical, Mechanical, Computer, or related Engineering discipline (or equivalent technical degree) from an ABET accredited program. * 0-4 years of relevant experience. * Strong desire to learn and grow in the areas of industrial automation, instrumentation, controls, and communications. * Self-motivated and curious with a collaborative mindset. * Strong verbal and written communications skills. * Ability to work in a collaborative multidisciplinary team environment. * Proficient in Microsoft Office applications, Word, Excel, and Teams * Experience with CAD software such as AutoCAD and Revit. * Willingness to pursue EIT/FE certification. * U.S. citizenship required. Required Submissions: To be considered for this position, you must submit the following: * Resume * A copy of current, or most recent, school transcript (If you are applying via a 3rd party site that does not allow attachments, please email transcript to ******************) Benefits: WRA recognizes that employees play an important role in its success. Our commitment to full-time employees is reflected in the comprehensive benefits package we offer: * Flexible work schedule options * Competitive salary * Leave accrual and paid holidays * Healthcare benefits * Group Life Insurance, as well as additional optional life Insurance, short and long term disability insurance * Flexible spending accounts for medical and dependent care reimbursement * 401(k) Retirement Plan * Tuition Reimbursement * Employee Assistance Program * Parental and maternity leave benefits WRA is an equal opportunity/affirmative action employer and complies with all applicable anti-discrimination laws. Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) * Not accepting resumes from 3rd party recruiters for this position * Req. #2771 #LI - Onsite #LI - Entry Level

Join Us: Finding a better way. It's what we do, in creating solutions, helping people, and improving our world. Imagine yourself at CHA, tackling some of the world's most critical challenges - around clean water, safe roads, efficient energy, resilient power sources, and buildings. Imagine yourself contributing your skills and passion to creating a world that is more sustainable, more diverse, and one that leans forward towards a better future. Our people are approachable, caring, down to earth, plugged in, and hands-on. They are skilled, thoughtful, and innovative. Can you imagine yourself here? CHA is looking for someone with your passion to join our 2026 Summer Internship Program! If you are earning your degree in Electrical Engineering and are interested in an internship working in one of our many disciplines, apply today to join us in finding a better way. What You'll Do: CHA's Internship Program will ensure you are ready to make the transition from student to professional. Over our 10-week program, you will have plenty of opportunities to connect with people who will help you on your career journey. You will connect with your peers through group projects, planned social events, and working alongside one another in the office or field. You will connect with professionals across the business, collaborating on a company projects and important work that will have a real, positive impact on the world we all live in. The connections you make during your CHA Internship can play a critical role as you complete your studies and transition into your professional career. The Internship Program here at CHA aims to prepare students for the professional working environment through opportunities to work as part of a team, developing the planning skills to effectively balance work demands with your personal life, and figuring out how to navigate different personalities to ensure team success. Our program is more than just an internship; you will learn about yourself; identify your career passions and go after them. As a CHA Intern you will experience working in your field - there is nothing like real world experience! An internship with CHA will help you clarify and bring into focus your future career goals, it will give you the opportunity to try new things, explore and discover what you want for your future. So, join us for summer 2026; let's find a better way together! Want to learn more about how CHA is finding a better way? Visit us online at CHAsolutions.com What You Bring: * Working towards an Electrical Engineering degree * Attending a full time matriculated and nationally accredited Bachelor or Graduate program. * Completed one full year of college (rising sophomore). * Candidates going into their junior or senior year of college are preferred. * May 2026 graduates will not be accepted for CHA's Internship program. * Experience with Microsoft Office required. * Experience with AutoCAD preferred. * Must possess the ability to work in a team environment. * Good oral and written communication skills required. Culture/EEO Statement: At CHA, we work every day to create solutions, help people, and improve our world, committed to creating and fostering excellence in our diverse and highly talented teams. Our teams continually strive to find better ways - always searching, never settling - to achieve extraordinary results. Our values around hiring, training, and community engagement reflect a company culture that is inclusive and forward leaning, always pushing the limits of what is possible. We as an organization celebrate the values of inclusion and equality, and advocate for the full participation of all people in an environment free of discrimination. To support these values, we invite all qualified applicants to be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, age, disability, protected veteran status, or any other characteristic protected by law.

If you need assistance with the application process, please notify IB Abel's Human Resources Department. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. About Us IB Abel's 110-year history is a testament to its adaptability, forward-thinking leadership, commitment to safety, and stellar service and project delivery process. Our core values-Responsible, Integrity, Results-Oriented, Ownership, and Professional-shape everything that we do at all levels of the company and are purposefully incorporated into all company communications, meetings, and strategic planning. Our use of the EOS model (Entrepreneurial Operating System) also provides structure and clarity among all levels of the company to maintain focus on our shared goals. IB Abel (IBA) is committed to providing ample learning and career development opportunities to its team members via our Associate's Program in Project Management, Estimating, and Accounting and our growing Learning Management System. The Opportunity We are seeking an Associate Electrical Engineer who is responsible for performing general electrical engineering tasks including the design, coordination, and technical support of electrical power distribution, construction, and related systems for commercial, industrial, and government projects. Key Responsibilities Electrical Engineering & Design - Perform design of electrical power distribution, lighting, and related systems for commercial, industrial, and government projects; develop electrical engineering and design scopes of work; perform electrical engineering calculations and studies; prepare drawings suitable for permit, construction, and competitive bidding; and perform CAD work. Technical Documentation & Specifications - Prepare technical specifications; specify equipment and materials and assist in obtaining pricing from suppliers; support preparation and review of submittals, product data, and shop drawings; perform specification reviews; and support document control activities. Project Coordination & Collaboration - Coordinate with other engineering and construction disciplines; coordinate with electric utility companies; assist estimators and project managers with electrical designs, value engineering, and code interpretation; support RFI generation and review; and assist with ACC Build project setup. Field Support & Construction Assistance - Provide guidance to field personnel during construction; assist with equipment startup, troubleshooting, and code interpretation; and conduct field surveys to observe existing conditions and gather project information. Client & Stakeholder Engagement - Meet with customers to clarify scope of work and consult on technical or constructability issues and professionally represent IB Abel with clients, utilities, and project partners. Operational Support - Support Electrical Services Operations as needed to ensure successful project execution and assist with ongoing project documentation, coordination, and compliance requirements. Who We're Looking For Bachelor of Science in Electrical Engineering or Electrical Engineering Technology. 0-2 years in the practice of Electrical Engineering, focusing on power systems. Licensure: EIT preferred or ability to obtain EIT. Proficient in the use of Revit, AutoCAD, AGi32, ETAP, and Bluebeam Revu as well as MS Office applications with strong skills in Excel, Word, and MS Project. Local to Pennsylvania (preferable) but with regular travel to other offices, customer facilities, jobsites and yard locations for offsite meetings (flexibility to work from home when appropriate). A “can-do” attitude, strong work ethic, and ability to collaborate effectively with various teams. Why Choose IBA Culture of Growth: Many of our leaders started in entry-level field roles and advanced within the company. Flexibility & Autonomy: We empower our team to succeed without micromanagement. Competitive Compensation & Benefits: Includes competitive salary, vehicle allowance program, 401(k) with company matching, tuition reimbursement, and comprehensive benefits package including medical, dental, and vision. Stability & Variety: Work for multi-generational family-oriented business on diverse, fast-paced projects without the stress of a large corporate structure. Incentives: Performance-based bonuses/incentives and a progressive PTO programs that grows with your tenure! Collaboration: A team environment where we work together to solve challenges and celebrate wins. Step Into a Career That Powers the Future! IB Abel is an equal opportunity employer, all qualified applicants are encouraged to apply.

Job DescriptionDescription: Who We Are: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets including Defense, Aerospace, High-Performance Computing, Power Electronics, Medical and HVAC industries. We provide thermal products and engineering services to the world's leading defense and commercial companies such as Intel, Hewlett Packard (HP), GE Healthcare, Google, Facebook, Lockheed Martin, Raytheon, Northrop Grumman, Boeing, and General Electric. We also conduct advanced research and development work for government agencies including NASA, DOD, and DOE. Our products and technologies have become integral parts of numerous mission-critical devices, from life-saving MRI and CT scanners to energy-efficient building HVAC systems to weather and telecommunications satellites. ACT is strongly committed to our customers, employees, and our community. Innovation, Teamwork and Customer Care are our core values that drive the continuous growth of our company. Our skilled and dedicated staff is our strongest resource and the critical factor in our ongoing success. Position summary: The Product Development Electrical Engineer supports various phases of projects ranging from concept generation and initial design all the way through final hardware delivery and volume production. The types of projects vary from exploratory trade studies to highly detailed electro-mechanical systems, to the fabrication of complicated prototype assemblies and testing. As a member of the Product Development department the Electrical Engineer will be engaged in work related to the design of motor controller systems including the development of new electrical schematics, revision to legacy schematics, research of new electrical components and materials, and review of electrical harness & panel area designs and work instructions. At any given time, the Electrical Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Candidates that have a strong technical background with hands-on experience developing complex controls hardware excel at this position. Responsibilities Include: Motor drive electrical system design and component selection Design of electrical system safety features including circuit breakers, overload devices, etc. Specification of motor, fan, and valve control componentry PLC hardware selection and programming (experience with Phoenix Contact hardware and PC WORX software a strong plus) Electromagnetic Interference (EMI) analysis, design and testing (Familiarity with MIL-STD-461) Assist and approve production electrical panel test procedures for test technicians Creation and revision of complex electrical schematic details Creation and revision of numerical and 3-D models of electrical components Creation and recommendations for electrical packaging solutions Recommendation and continuous improvements to electrical test fixtures and procedures Review of work instructions and procedures for proper control panel assembly Assistance with employee training and cross-training employees for production flexibility Utilization of information from vendor drawings, catalogs, technical manuals, etc. Fabrication procedure and work instruction development Working with a multidisciplinary group of engineers and technicians Managing program schedules and budget as needed Frequent customer communication The ideal candidate will possess the following qualities: Initiative: Product Development engineers don't have a daily agenda given to them and are expected to take it upon themselves to work closely with customers, vendors and ACT personnel to fulfill projects goals and objectives. Technical Knowledge: We are looking for a candidate who has a strong academic engineering background, coupled with hands-on skills and fabrication and testing capabilities. Teamwork Skills: As a member of the product development team, the ideal candidate must have the ability to give and receive encouragement and constructive criticism, communicate effectively, and work cooperatively with team members to achieve common goals. Critical Thinking Skills: The product development customer and projects vary widely, and the strategies and design approaches that worked for one program may be completely different for the next opportunity. Because of that, we need a curious individual who loves to dive in, experiment, and develop innovative solutions to new challenges. Desire to Grow: The ideal candidate wants to be the best at their job and is never content with "good enough". They set lofty goals and constantly seek to improve themselves and expand their professional knowledge and skillset. They desire to sharpen their engineering and project management skills and grow in leadership ability and responsibility. ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. Requirements: US citizenship or permanent residency strongly preferred due to ITAR requirement B.S. or M.S. degree in Electrical Engineering or related STEM field. Proficiency in using Microsoft Office, SolidWorks, AutoCAD, Microsoft Project, MRP Systems, and PLC programming languages (PC WORX or PLCnext preferred) 3+ years of hands-on experience with design, fabrication, and testing of motor controllers, complex electrical circuits, PLC systems or other relevant controls system experience Strong problem-solving ability and desire to iterate complicated solutions Good verbal and written skills

You are a P.E. with a B.S. in Electrical Engineering and 15+ years of hands-on experience. You have a comprehensive understanding of electric utilities (investor-owned, public power, and/or cooperatives). You are already an expert. Robson Forensic will train you to be a forensic expert. As an Electrical Engineer - Electric Utilities Expert, you will: Investigate incidents involving design, construction, operation, and maintenance of electrical systems, equipment, and devices. Analyze applicable federal, state, and local laws, rules, regulations, codes, standards of care, and safety aspects. Write clear, scientifically sound reports. Provide expert testimony. You will delve into the "why" behind incidents, critically assessing decision-making, operational practices, and the standard of care. This role offers you a chance to: Use your cumulative training, experience, and critical thinking skills. Collaborate with highly respected experts. Continuously learn and grow. Make a tangible difference. LOCATIONS: Miami Lakes/Palm Beach Gardens, FL, Atlanta, GA, Las Vegas, NV, Dublin, OH, Lancaster, PA, Irving, TX REQUIREMENTS: You have a Bachelor's degree in Electrical Engineering. You are a licensed Professional Engineer (P.E.) You have 15+ years of electrical engineering experience, including experience with electric utilities (investor-owned, public power, and/or cooperatives). Your expertise includes design, construction, operation, & maintenance of electrical systems, equipment, & devices. You have thorough knowledge of federal/state/local laws, rules, regs, codes, standards of care, & safety aspects. Your project management experience is a plus. You can work both independently and as part of a collaborative team. You have excellent technical, analytical, writing, and communication skills. You are willing to travel about 20% on average. You have a valid driver's license and the ability to drive. Prior forensic experience is not required. We seek professionals eager to apply their deep industry knowledge to a challenging new domain. ABOUT US: Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines. Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy. We are an Equal Opportunity Employer. HOW TO APPLY: If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience.

Cannonball Recruiting is seeking a highly motivated Designer to join the team of professionals at a manufacturing facility for the food and beverage industry in York, Pennsylvania. This position will be responsible for the design of electrical and electro-mechanical assemblies for high speed automation, including robotics. The right candidate will provide support to our engineering department through innovative ideas. Requirements: 2-year associates degree (A.S.) in Electrical Engineering or 5 years progressive experience Proficiency with a 2D drafting package: AutoCAD, AutoCAD Electrical, Autodesk Vault a plus Proficiency with Microsoft Word, Microsoft Excel and Microsoft Outlook Knowledge of basic electrical system design and components such as contractors, fuses, relays, terminal blocks and transformers Capable of independently solving problems and bringing the problems to resolution Knowledge of various types of electrical components and assemblies such as VFD's, PLC's and Sensors Well organized and detail oriented Must be able to work in a team environment Must effectively communicate with employees, vendors and clients Knowledge of basic electrical engineering principles a plus Limited travel required for site evaluations Position may require applicant to come in contact with raw and processed food/beverages including red meat/pork, gluten, nuts and seeds, eggs, flour, milk, yeast and alcohol UL 508A MTR certification or willing to obtain Job Duties: Design and detail of equipment electrical parts and systems Design of panel layouts and interconnection diagrams Support research and development of new equipment through imagination and original ideas Create economical assemblies with safety and durability as the key ingredients Interpret and integrate electrical drawings/models from clients and vendors Detailing (drafting) of equipment electrical parts and systems Detailing (drafting) of panel layouts and interconnection diagrams Purchase components associated with projects Support electrical department change requests Interact with vendors to determine application of technology updates Troubleshoot equipment issues during shop assembly Benefits: Healthcare/Dental/Vision Plans Company Paid Life Insurance Voluntary Supplemental Life insurance - (employee and dependents) 401(k) Savings Plan Education Reimbursement Program Paid Holidays

At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven". We have been in business for 110 years and we are known for our quality work and quality employees. This is your chance to join our team - help us to design the infrastructure and buildings that improve the world! Whitman, Requardt, & Associates (WRA) is currently seeking an experienced Instrumentation and Control (I&C) Engineer in our York, PA office. As an I&C Engineer, you will support the design, programming, and modernization of Supervisory Control and Data Acquisition (SCADA) systems that monitor and control critical water and wastewater infrastructure You'll work closely with multidisciplinary engineering teams to plan and design process control systems, develop PLC and HMI programs, support network and cybersecurity initiatives, and perform field testing and commissioning. Responsibilities: * System Design: Collaborate with mechanical, electrical, and civil engineers to design, specify, and document process control and SCADA systems. This involves creating design drawings such as process & instrumentation diagrams (P&IDs), electrical diagrams, schematic diagrams, loop diagrams and network architecture diagrams. The design process will also include the selection of appropriate hardware and software components, Input/Output points lists, and process control narratives. * Programming and Configuration: Utilize your expertise in programming of industrial controls for the water and wastewater industry. You'll configure and program HMIs, OITs, PLCs, RTUs, and other similar devices for the integration and operational functionality of various processes. * Testing and Troubleshooting: Witness and/or conduct testing and validation of SCADA systems and their components. Perform field inspections, develop testing procedures, and witness commissioning of control systems. * Security and Compliance: Have a general understanding of industrial related security measures to safeguard SCADA systems. Support the implementation of cybersecurity best practices, including asset inventory, network segmentation, and access control aligned with NIST CSF and AWWA guidance. * Travel: Travel around the mid-Atlantic region will be required (10%). Travel destinations will be construction sites, factories/shops and client meetings. Travel will be primarily days trips with minimal overnights required. Requirements: * Bachelor of Science degree in Mechanical, Electrical, Computer, or related Engineering degree and/or equivalent degree from an ABET accredited program. * 5-10 years of relevant experience. * EIT certification preferred; willingness to pursue PE licensure encouraged. * Hands-on experience working with SCADA, PLC, HMI systems in industrial settings. * Proficient using SCADA software such as VTSCADA, Rockwell FactoryTalk, or comparable platforms. * Proficient using PLC programming applications such as Allen Bradley, Modicon, or comparable platforms. * Knowledge of industrial communication protocols like MODBUS, DNP3, EtherNet IP, OPC, etc. * Understanding of cybersecurity principles as they relate to SCADA systems. * Strong verbal and written communications skills. * Ability to work in a collaborative multidisciplinary team environment. * Proficient in Microsoft Office applications, Word, Excel, and Teams * Experience with CAD software such as AutoCAD and Revit. * U.S. citizenship required. Benefits: WRA recognizes that employees play an important role in its success. Our commitment to full-time employees is reflected in the comprehensive benefits package we offer: * Flexible work schedule options * Competitive salary * Leave accrual and paid holidays * Healthcare benefits * Group Life Insurance, as well as additional optional life Insurance, short and long term disability insurance * Flexible spending accounts for medical and dependent care reimbursement * 401(k) Retirement Plan * Tuition Reimbursement * Employee Assistance Program * Parental and maternity leave benefits WRA is an equal opportunity/affirmative action employer and complies with all applicable anti-discrimination laws. Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) Not accepting resumes from 3rd party recruiters for this position * Position # 2770 #LI - Onsite #LI - Mid Level

Job DescriptionSalary: If you need assistance with the application process, please notify IB Abels Human Resources Department. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. About Us IB Abels 110-year history is a testament to its adaptability, forward-thinking leadership, commitment to safety, and stellar service and project delivery process. Our core values Responsible, Integrity, Results-Oriented, Ownership, and Professionalshape everything that we do at all levels of the company and are purposefully incorporated into all company communications, meetings, and strategic planning. Our use of the EOS model (Entrepreneurial Operating System) also provides structure and clarity among all levels of the company to maintain focus on our shared goals. IB Abel (IBA) is committed to providing ample learning and career development opportunities to its team members via our Associate's Program in Project Management, Estimating, and Accounting and our growing Learning Management System. The Opportunity We are seeking an Associate Electrical Engineer who is responsible for performing general electrical engineering tasks including the design, coordination, and technical support of electrical power distribution, construction, and related systems for commercial, industrial, and government projects. Key Responsibilities Electrical Engineering & Design - Perform design of electrical power distribution, lighting, and related systems for commercial, industrial, and government projects; develop electrical engineering and design scopes of work; perform electrical engineering calculations and studies; prepare drawings suitable for permit, construction, and competitive bidding; and perform CAD work. Technical Documentation & Specifications - Prepare technical specifications; specify equipment and materials and assist in obtaining pricing from suppliers; support preparation and review of submittals, product data, and shop drawings; perform specification reviews; and support document control activities. Project Coordination & Collaboration - Coordinate with other engineering and construction disciplines; coordinate with electric utility companies; assist estimators and project managers with electrical designs, value engineering, and code interpretation; support RFI generation and review; and assist with ACC Build project setup. Field Support & Construction Assistance - Provide guidance to field personnel during construction; assist with equipment startup, troubleshooting, and code interpretation; and conduct field surveys to observe existing conditions and gather project information. Client & Stakeholder Engagement - Meet with customers to clarify scope of work and consult on technical or constructability issues and professionally represent IB Abel with clients, utilities, and project partners. Operational Support - Support Electrical Services Operations as needed to ensure successful project execution and assist with ongoing project documentation, coordination, and compliance requirements. Who Were Looking For Bachelor of Science in Electrical Engineering or Electrical Engineering Technology. 0-2 years in the practice of Electrical Engineering, focusing on power systems. Licensure: EIT preferred or ability to obtain EIT. Proficient in the use of Revit, AutoCAD, AGi32, ETAP, and Bluebeam Revu as well as MS Office applications with strong skills in Excel, Word, and MS Project. Local to Pennsylvania (preferable) but with regular travel to other offices, customer facilities, jobsites and yard locations for offsite meetings (flexibility to work from home when appropriate). A can-do attitude, strong work ethic, and ability to collaborate effectively with various teams. Why Choose IBA Culture of Growth: Many of our leaders started in entry-level field roles and advanced within the company. Flexibility & Autonomy: We empower our team to succeed without micromanagement. Competitive Compensation & Benefits: Includes competitive salary, vehicle allowance program, 401(k) with company matching, tuition reimbursement, and comprehensive benefits package including medical, dental, and vision. Stability & Variety: Work for multi-generational family-oriented business on diverse, fast-paced projects without the stress of a large corporate structure. Incentives: Performance-based bonuses/incentives and a progressive PTO programs that grows with your tenure! Collaboration: A team environment where we work together to solve challenges and celebrate wins. Step Into a Career That Powers the Future! IB Abel is an equal opportunity employer, all qualified applicants are encouraged to apply.

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics Internship Overview The TAIT Internship program is a fully immersive, experiential program. Interns are placed in a department based on their major and interests, but it is up to them to set goals and define their experience at TAIT. We take pride in pushing the boundaries of what's possible, and we're committed to nurturing emerging talent. We're excited to offer a unique and rewarding internship experience that goes beyond the typical coffee runs and photocopying tasks. We're looking for motivated and passionate individuals to join us on this journey of growth, learning, and achievement! Are you ready to roll up your sleeves, challenge yourself, and make a real impact? If so, you're the kind of intern we're looking for. At TAIT, we understand that internships are a two-way street. While you'll be gaining valuable experience, you'll also be contributing to our team and projects in meaningful ways. We encourage you to set your goals, develop your skills, and help shape your own experience. Position Details Position: Electrical Engineering Intern Job Specifications: Working with the Electrical Engineering team designing schematics and working on panel layouts for UL 508A Industrial Control Panels. Understanding of 3-phase AC (208/VAC and/or 480VAC), 24VDC control circuits, and comfortable with CAD software. Engineering student with focus in Automation, Electrical or Power. Location: West Lincoln Facility in Lititz, PA Duration: June 2026-August-2026 Compensation: $18/hr. Schedule: Interns are scheduled to work 40 hours per week on 1st shift dependent on projects and business needs Eligibility: This role is open to U.S. Residents only Intern Responsibilities + Schematic Design and Panel Layout of Industrial Control Panels + Generation of Bill of Materials + Updating documentation to As-Built or As-Installed status Qualifications To qualify for this internship, you must meet the following: + Currently pursuing a degree or equivalent in a related field: + Electrical Engineer + Electronic Engineering + Graduating in between December 2025 - May 2027 + GPA: 2.8 or Above + Familiarity with basic computer applications and software + Willingness to learn and develop skills in specific manufacturing tasks and processes Please note that this internship is designed for individuals seeking an entry-level opportunity to gain practical experience in manufacturing and assembly processes. Potential Career Paths This position also provides a path for continued growth as a: Electrical Engineer Why Choose TAIT? + Housing: We offer a housing stipend our onsite interns in PA, NY, FL, CO, NV, and CA. This benefit applies to interns who live more than 50 miles from the worksite and would need to relocate to the area to complete their internship + Gigs: You may be eligible for full time or part time conversion upon successful completion of your internship program* + Real-World Impact: Your work here won't just be busy work. You'll be an integral part of our team, contributing to projects that truly matter. Previous interns worked on actual projects that have been seen by millions of people! + Professional Growth: We're committed to helping you grow and learn. You'll gain hands-on experience in your chosen field and develop skills that will serve you well in your future career. + Mentorship: You won't be navigating this journey alone. Our team of experts will provide guidance, mentorship, and support to help you excel. + Innovation: We live on the cutting edge of innovation, and you'll be part of our team's creative solutions and groundbreaking ideas. + Networking: Build your professional network by connecting with industry leaders, fellow interns, and our experienced team. Are you ready to embark on a journey of growth, learning, and achievement? Join us and be a part of something special at TAIT. Your internship is not just a step in your career; it's a leap forward. Apply today! TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

Full-time Description Who We Are: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets including Defense, Aerospace, High-Performance Computing, Power Electronics, Medical and HVAC industries. We provide thermal products and engineering services to the world's leading defense and commercial companies such as Intel, Hewlett Packard (HP), GE Healthcare, Google, Facebook, Lockheed Martin, Raytheon, Northrop Grumman, Boeing, and General Electric. We also conduct advanced research and development work for government agencies including NASA, DOD, and DOE. Our products and technologies have become integral parts of numerous mission-critical devices, from life-saving MRI and CT scanners to energy-efficient building HVAC systems to weather and telecommunications satellites. ACT is strongly committed to our customers, employees, and our community. Innovation, Teamwork and Customer Care are our core values that drive the continuous growth of our company. Our skilled and dedicated staff is our strongest resource and the critical factor in our ongoing success. Position summary: The Product Development Electrical Engineer supports various phases of projects ranging from concept generation and initial design all the way through final hardware delivery and volume production. The types of projects vary from exploratory trade studies to highly detailed electro-mechanical systems, to the fabrication of complicated prototype assemblies and testing. As a member of the Product Development department the Electrical Engineer will be engaged in work related to the design of motor controller systems including the development of new electrical schematics, revision to legacy schematics, research of new electrical components and materials, and review of electrical harness & panel area designs and work instructions. At any given time, the Electrical Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Candidates that have a strong technical background with hands-on experience developing complex controls hardware excel at this position. Responsibilities Include: Motor drive electrical system design and component selection Design of electrical system safety features including circuit breakers, overload devices, etc. Specification of motor, fan, and valve control componentry PLC hardware selection and programming (experience with Phoenix Contact hardware and PC WORX software a strong plus) Electromagnetic Interference (EMI) analysis, design and testing (Familiarity with MIL-STD-461) Assist and approve production electrical panel test procedures for test technicians Creation and revision of complex electrical schematic details Creation and revision of numerical and 3-D models of electrical components Creation and recommendations for electrical packaging solutions Recommendation and continuous improvements to electrical test fixtures and procedures Review of work instructions and procedures for proper control panel assembly Assistance with employee training and cross-training employees for production flexibility Utilization of information from vendor drawings, catalogs, technical manuals, etc. Fabrication procedure and work instruction development Working with a multidisciplinary group of engineers and technicians Managing program schedules and budget as needed Frequent customer communication The ideal candidate will possess the following qualities: Initiative: Product Development engineers don't have a daily agenda given to them and are expected to take it upon themselves to work closely with customers, vendors and ACT personnel to fulfill projects goals and objectives. Technical Knowledge: We are looking for a candidate who has a strong academic engineering background, coupled with hands-on skills and fabrication and testing capabilities. Teamwork Skills: As a member of the product development team, the ideal candidate must have the ability to give and receive encouragement and constructive criticism, communicate effectively, and work cooperatively with team members to achieve common goals. Critical Thinking Skills: The product development customer and projects vary widely, and the strategies and design approaches that worked for one program may be completely different for the next opportunity. Because of that, we need a curious individual who loves to dive in, experiment, and develop innovative solutions to new challenges. Desire to Grow: The ideal candidate wants to be the best at their job and is never content with "good enough". They set lofty goals and constantly seek to improve themselves and expand their professional knowledge and skillset. They desire to sharpen their engineering and project management skills and grow in leadership ability and responsibility. ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. Requirements US citizenship or permanent residency strongly preferred due to ITAR requirement B.S. or M.S. degree in Electrical Engineering or related STEM field. Proficiency in using Microsoft Office, SolidWorks, AutoCAD, Microsoft Project, MRP Systems, and PLC programming languages (PC WORX or PLCnext preferred) 3+ years of hands-on experience with design, fabrication, and testing of motor controllers, complex electrical circuits, PLC systems or other relevant controls system experience Strong problem-solving ability and desire to iterate complicated solutions Good verbal and written skills