Electrical engineer jobs in Lorain, OH - 305 jobs

Who is IC? Independence Construction is one of the largest CM businesses headquartered in Northeast Ohio. As part of the DiGeronimo Companies, we offer our clients self-perform services through our affiliated companies, as well as bring an owner's approach to projects through the company's work as a developer. We bring our experience and reputation for honesty, integrity, and outstanding performance to the world of design and management in order to ensure the best results for our partners, subcontractors, and community. What do we believe in? PEOPLE: Provide a safe, family-oriented environment. Commitment to integrity. Protect our most valuable assets. PERFORMANCE: Always deliver the highest quality. Find solutions. Provide value to our partners. COMMUNITY: Positively impact the communities we serve. Give back. Leave the world a better place than we found it. As a Project Engineer, your key responsibilities are to assist the project manager and/or superintendent in one or more aspects of a construction project. Coordination with Subs, vendors, suppliers, and Independence Construction project team. Administer and monitor compliance with construction contracts with Owners, subcontractors and vendors. Coordinate and expedite materials and services for the job site, in conjunction with superintendent. Schedule and manage meetings throughout each phase of construction and preconstruction. Assist the PM with the management of Project Budget, Budget Revisions, Cost Projections, and Cash Flow Projections. Assist with the generation of reports. Review and coordinate structural, architectural and MEP drawings throughout the project. Assist PM in the oversight and management of change management processes. Collect and analyze the trade contractor proposal for scope changes. Review and negotiate the cost for the change in scope to ensure the pricing is accurate and fair for the change in work. Log the change management to the correct cost codes. Issue the subcontract change order upon approval of the change by Owner and PM. Responsible for the entire RFI process (initiate, review the response, maintain a log and distribute to team as appropriate. Responsible for the entire submittal process (initiate, review the submittal, maintain a log and distribute to team as appropriate upon approvals. Responsible to keep accurate and current at all times the drawing log, submittal log, and RFI log. Coordinate all project meetings with PM and Superintendent prior to the start of project. Attend Owner / Architect / CM (Contractor) meetings. Collect, review and process subcontractor payment applications as assigned by the PM. Assist in compiling owner payment applications. Assist the Superintendent and PM as requested in creating and updating the Master Schedule. Quality Control and Quality Assurance - Work with the team (PM, PX, Supt.) for the development of the project QA/QC program. Assist PM and Superintendent with Close-out process. Assist with the preliminary punch list process. Coordinate owner-requested warranty requirements during the warranty period. Do you have what it takes? Bachelor's degree in construction management or engineering or equivalent combination of education and experience. 2-5 years of previous related experience is required Strong written and oral communication skills. Knowledge of budgeting and expense control. Able to write reports, and business correspondence. Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines. Able to perform duties independently. Computer skills: Microsoft Office applications. Strong attention to detail.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding ExpertTM for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID: 27839 Purpose Lincoln Electric is seeking a skilled and motivated Controls Engineer to join our R&D team. This role will focus on the simulation, design, and tuning of digital and analog control systems for power electronics and motor controls in welding, cutting, and EV charging applications. The ideal candidate will have a strong background in Electrical Engineering and Controls Engineering and will contribute to the design of advanced control algorithms, compensator designs, and system-level models to enhance product performance and stability. Duties and Responsibilities Control System Design & Simulation Design and simulate digital and analog compensators for power converters and motor drives using tools such as Python/NumPy/SciPy, SPICE, and MATLAB/Simulink. Perform frequency-domain and time-domain analysis to ensure system stability and robustness. Develop analog and digital signal processing systems for feedback conditioning and waveform control. Implementation & Tuning Work with firmware engineers to translate control designs into firmware implementations using C/C++ or model-based code generation. Tune control loops in real-time systems, including PID, PI, lead-lag, state space, and nonlinear controllers. Support hardware bring-up and debugging of control systems in lab environments. System Modeling & Analysis Create detailed models of power electronic systems including converters, inverters, and motor loads. Analyze system dynamics, parasitics, and nonlinearities to improve control performance. Collaborate with hardware engineers to co-design control and power stages. Innovation & Continuous Improvement Stay current with emerging control techniques, digital signal processing, and power electronics trends. Propose and prototype novel control strategies to improve performance, efficiency, and reliability. Document design processes, simulation results, and tuning procedures for knowledge sharing. Basic Requirements Bachelor's degree in Electrical Engineering or Systems and Control Engineering, or related field. Level II Engineer 3+ years of hands-on, controls engineering experience. Level III Engineer 5+ years of hands-on, controls engineering experience. Level IV Engineer 8+ years of hands-on, controls engineering experience. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Proficiency in simulation tools such as MATLAB/Simulink, SPICE, PLECS, PSIM, or equivalents. Strong understanding of control theory, compensator design, system dynamics, and signal processing. Experience with embedded systems and real-time control applications. Familiarity with real-time operating systems, digital signal processors, and microcontrollers. Hands-on experience with lab equipment such as oscilloscopes, frequency response analyzers, spectrum analyzers, and power analyzers. Excellent problem-solving skills and ability to work in cross-functional teams. Strong written and verbal communication skills. Preferred Qualifications Experience with high power (480V) electrical applications. Experience with EV charging, welding, or plasma cutting applications. Familiarity with safety standards and EMI/EMC considerations in controller design. Experience with FPGA-based control systems or high-speed digital platforms. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

They are responsible for prioritizing team activities, developing team members, and identifying and communicating team resource needs. Additionally, they are responsible for development of customer engineering relationships, project management, field engineering support and promotion of Corporate client technical/product solutions. Essential Duties and Responsibilities: • Prioritize team member activities and drive projects to be completed within project timelines. • Responsible for development and performance of team of technical personnel. This includes setting objectives, development plans, and delivering performance reviews. • Support and manage projects (product development or other) with responsibility for setting priorities, meeting customer deadlines and coordinating required activities via the APQP process • Accountable for building and maintaining strong relationships with our customers and their engineering teams • Create and maintain project schedule and milestone tracking to drive projects to successful completion ensuring accountability amongst all key stakeholders • Create project justifications and ensure target financial goals are achieved • Facilitate decision making and/or selection of products, components, or specific product development projects • Drive for continuous improvement of Corporate client product development processes and Corporate client products • Provide guidance for technical/product strategies and manage the execution of those strategies based on voice of customer feedback (VOC) and Corporate client technical/product strategic initiatives • Lead investigations and manage response to field performance issues and contribute to corrective action plans for key engineering issues • Other duties may be assigned Education and Experience: Required experience: • Bachelors of Science in Mechanical, Industrial, or Manufacturing Engineering from an accredited college or university • Minimum ten years' experience in relevant field • Experience in a leadership role in engineering, product development and/or product commercialization and experience in a customer facing role Preferred experience: • Knowledge of mechanical design principles, finite element analysis, engineering documentation, statistical analysis, and quality systems • Experience developing and maintaining quality documentation including process flow diagrams, PFMEA's, DFMEA's, control plans, APQP checklists, and work instructions • Creo/CATIA/NX • Teamcenter • Castings manufacturing and finishing process knowledge, understanding of plating techniques, familiarity with inspection and measurement methods • Commercial vehicle experience, especially vehicle chassis, suspensions, and brakes a plus. Qualifications and Competencies: • Engineering: Possesses the knowledge and skills required to create and execute engineering diagrams, plans, and models that fulfill the product and customer requirements. This includes specific skills and knowledge for either metal or plastics depending on the function/department. Is able to produce practical and functional solutions that meet operational needs. • Customer Focus: Builds customer confidence, is committed to increasing customer satisfaction, sets achievable customer expectations, assumes responsibility for solving customer problems, ensures commitments to customers are met, solicit opinions and ideas from customers. • Strategic Thinking: Creates and communicates a long-term vision, balances short and long term goals, keeps own and team's work aligned with overall goals, understands the market and can predict change, understands the industry and the competition, creates and adjusts strategic plans. • Managing for Results: Sets challenging and productive goals for team, keeps team accountable for actions, provides leadership and motivation, provides resources and support, uses checkpoints and data to track progress, sets up systems and processes to measure results. • Execution: Getting the job done, problem solving, driving for results, exercising control; setting high goals, using measurements, accountability; tenaciously working to meet or exceed goals; continuously improving themselves and the business. • Teamwork: Meets all team deadlines and responsibilities, listens to others and values opinions, helps team leader to meet goals, welcomes new members and promotes a team atmosphere; emphasizes cooperation and collaboration; treats coworkers like internal customers.

DESCRIPTION: Programming knowledge in Siemens NX of complex components. Airfoil knowledge a plus. Responsible for programming and editing for multiple machine languages. Heidenhian, Siemens ,+ Fanuc. Basic design of fixturing to be able to machine components. Familiarity with 3 and 5 axis milling machines / Wire EDM Machines/ Electrode CNC Machine and EDM sinkers. Responsibilities: -Programming complex components in Siemens NX. -Help where needed and being a team player, communication is critical. -Reading and interpreting blueprints. -Planning and forecasting stock needs; ordering as needed. -Designing fixturing/ workholding for airfoil components. -Creating an order of operations sequence to complete components in the shop. QUALIFICATIONS: Experience in airfoils tooling designs- Includes core dies, wax dies, fixturing. -Computer knowledge of Siemens NX. -Ability to read complex airfoil blueprints, a plus. -Demonstrate strong sense of ownership and dedication to meeting deadlines. -Maintain a positive work atmosphere by behaving and communicating in a manner that gets along with customers, clients, co-workers, and supervisors. -Good organizational and interpersonal skills. -Willingness to learn an improve upon skills and techniques.

The Department of Electrical, Computer, and Systems Engineering (ECSE) at Case Western Reserve University (CWRU) invites applications for one non-tenure-track faculty position at the Assistant or Associate Professor rank. Appointments will be considered for starting dates as early as July 1, 2026. Appointment rank will ultimately be commensurate with experience. Candidates must have a Ph.D. degree in Electrical Engineering, Computer Engineering, or a closely related field. In compliance with the City of Cleveland's Pay Transparency Ordinance (effective October 27, 2025), the annual starting base salary range for this position is from $90,000 - $101,000. CWRU considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market and organizational considerations when extending an offer. University employees enjoy a comprehensive benefits package that includes excellent healthcare, retirement plans, tuition assistance, and paid time off. All applicants must hold either great promise for (Assistant Professor rank) or great track record in (Associate Professor rank) effective teaching, especially at the undergraduate level, and substantial service/outreach activities. The successful candidate is expected to teach at the undergraduate level in electrical and computer engineering. Priority areas of interest are introductory analog/digital circuits and instruments as well as junior- and senior-level design courses. Depending upon interest and expertise, the successful candidate will also be able to develop new courses at the undergraduate and graduate levels that further enrich the experiential learning opportunities of the students. The candidate is also expected to perform undergraduate student advising, coordinate/lead accreditation-related activities, serve on department- and university-level committees, and represent the department in outreach/recruitment events, as needed.

For nearly five decades, ZIN Technologies (ZIN) has provided integrated products and spaceflight hardware development services to NASA and Fortune 500 companies. ZIN specializes in the seamless and transparent progression between concept, detailed design, engineering, manufacturing, and operations. ZIN, with its uniquely qualified staff, and a proven track record of award winning work, delivers product development, system prototypes, and space flight hardware on time and under budget. ZIN has over 150 scientists, engineers, and technicians engaged in the development of specialized data acquisition and control systems, power converters, and optical-mechanical sy stems for aerospace and commercial applications. ZIN experience base includes competitively awarded engineering contracts from both government and commercial companies. Our scope of experience includes scientific, technical, operational, and program management, as well as the disciplines associated with large, complex space programs. ZIN Associates are talented, experienced individuals; many have advanced degrees and professional certifications that provide a wealth of knowledge and capabilities to our customers. Operating as a team, we are dedicated to supplying innovative, cost effective services and solutions. Job Description TO BE CONSIDERED, APPLY AT ************************ This position performs schematic capture, layout and implementation of design rules on PCBs of varying complexity. Prepares sketches, block diagrams, wiring diagrams, PCB layout etc. Prepare assembly drawings and BOMs. Works closely with Electrical engineers to apply all inputs and information as required developing final design drawings as appropriate. Must work well with interdisciplinary team. Must work within AS9100 framework and be familiar with Aerospace industry standards. Qualifications U.S. CITIZENSHIP REQUIRED POSSIBLE RELOCATION ASSISTANCE -Ability to collaborate with engineers and program/ project managers to create design drawings, reports and inputs to project schedules. - 3+ years experience with Mentor Graphics or Altium software - Knowledge of IPC-A-600, IPC-A-610, IPC-2221, IPC-222, IPC-6012 and J-STD-001 standards. -Knowledge and use of MS Office products - Experience and knowledge utilizing AutoCAD 2012 is desired Additional Information In addition to competitive salaries, ZIN offers excellent benefits to our associates, including medical, vision, and dental insurance; short- and long-term disability; life insurance; paid leave and paid holidays; 401(k) retirement plan (immediate vesting); education and training reimbursement; professional development opportunities; employee assistance program; flexible spending plans; credit union membership; and direct deposit. ZIN-Technologies, Inc. is an Equal Employment Opportunity Employer M/F/D/V

McGraw Kokosing is a leading industrial maintenance contractor based in Middletown, OH. With extensive capabilities that include off-site manufacturing and assembly, pipe fabrication and installation, electrical and instrumentation, structural steel erection, rigging, and equipment setting, we are committed to delivering best-in-class solutions to our clients. Serving a diverse range of industries including steel, power, oil and gas, and food and beverage, McGraw Kokosing provides comprehensive services such as planned plant outages, emergency maintenance, and capital improvement projects for both new and existing facilities. Since partnering with Kokosing Industrial in 1992, we have consistently prioritized safety and quality, striving to lead the industry in delivering exceptional results for our customers. Additionally, our preconstruction services include risk assessments, budget validation, 3D modeling, and more, ensuring that we meet and exceed our clients' expectations every step of the way. : McGraw Kokosing is a leading MEP and industrial maintenance contractor based in Middletown, OH. With extensive capabilities that include off-site manufacturing and assembly, pipe fabrication and installation, electrical and instrumentation, structural steel erection, rigging, and equipment setting, we are committed to delivering best-in-class solutions to our clients. Serving a diverse range of industries including steel, power, oil and gas, data center, and food and beverage, McGraw Kokosing provides comprehensive services such as planned plant outages, emergency maintenance, and capital improvement projects for both new and existing facilities. Since partnering with Kokosing Industrial in 1992, we have consistently prioritized safety and quality, striving to lead the industry in delivering exceptional results for our customers. Additionally, our preconstruction services include risk assessments, budget validation, 3D modeling, and more, ensuring that we meet and exceed our clients' expectations every step of the way. Job Description: The electrical project engineer role will be supporting a team to implementation of electrical systems for large scale industrial construction projects. They will be involved in mission critical projects, taking the project from pre-construction through final acceptance to successful completion. Directly responsible for the project safety and quality, project budget, schedule and job controls, vendor management, submittals and procedures. Duties and Responsibilities: * Manage project engineering and related personnel functions and activities. Includes planning procurement, design review, project controls, work assignments, etc. * Ensure project engineering activities comply with company and contract requirements and support overall construction schedule * Prepare documents to obtain quotes from vendors to provide material, equipment, and other specialty items. * Track material deliveries. * Interface with departments, divisions, and internal staff on issues related to budgeting, staffing, discipline of employees, training/development, scheduling and other activities involving discretion and judgment. * Review engineering plans and vendor submittals. * Monitor crew assignments to ensure productivity goals are met. * Conduct field walks and spot checks of work being performed. * Ensure compliance with county, state and OSHA policies and regulations. Required Skills: * 2+ years similar construction Project Engineer. * Degree in Electrical Engineering or Construction Management Skills and Abilities: * Must be able to understand, interpret, and consistently apply safety laws, company policies/standards. * Ability to apply innovative and effective management techniques to maximize employee performance. * Ability to build trust and achieve results with clients and company team members. * Read drawings, interpret work specifications and work scopes. * Demonstrate the ability to have solid attention to detail, and the ability to be a problem solver. * Strong work ethic to complete tasks as a team in a high-quality manner. Benefits: McGraw Kokosing offers competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. McGraw Kokosing is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class. McGraw Kokosing offers a competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. McGraw Kokosing is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class.

Osborn Engineering is seeking am Electrical Project Engineer for our Cleveland office. The successful candidate will have 10-15 years' experience in the planning, design, development, and construction phases of a variety of project types. This position reports directly to the Manager of Electrical Engineering and will work closely with the directors, managers, and engineering staff to ensure that our client's needs and expectations are exceeded. Osborn is a fully integrated multi-disciplined design firm that uses a specialized team approach to engineering projects. These teams are comprised of a staff of more than 350 professionals that provide designs for all phases of a wide range of projects. Osborn has specialists in civil, structural, mechanical, electrical, plumbing, fire protection and life safety, technology engineering, transportation and commissioning. As an employee-owned firm, each Osborn employee is committed to education and advancement - ensuring that each project is completed with a sense of pride. Osborn's strength lies with its people. Position Responsibilities: Complete project scope of work per discipline, project and client management, under direction of Project Manager. Perform analysis, design and documentation of power distribution, lighting systems, and backup power systems. Coordinate with specialists for fire alarm, technology and lighting design as required by project scope of work. Coordinate with architects, mechanical/plumbing engineers and other disciplines for equipment power needs and sizing electrical distribution. Perform electrical design calculations for electrical loads and panel schedules. Develop electrical systems one-line diagrams. Select and schedule electrical equipment. Edit specifications to reflect the project requirements. Meet with vendors to determine specification requirements for application. Coordinate with other disciplines for all Electrical design elements. Prepare design deliverables for SD, DD, CD level documents. Provide cost opinions for budgeting construction, and reviewing contractor change orders Perform project construction administration including response to RFI's and accurate review of submittals. Perform field verification and take-offs of existing systems for renovation projects. Attend meetings with clients, authorities having jurisdiction, and other professionals as projects require. Work planning and manage the design process to the available hours in the work plan. Job Requirements/Qualifications: (10 - 15) Years of experience in Electrical Design in Consulting Engineering. Working knowledge of design and analysis software such as Revit, SKM, ETAP, Easypower. Knowledge of National Electrical Code (NEC), State Energy Code, NFPA, and FGI Guidelines. Experience with electrical system studies such as short circuit, over-current device coordination, and Arc Flash Hazard analysis per NPFA 70E. Knowledge of standard construction practices and the ability to work with contractors to address construction issues. Coordinate with technical leads and senior engineers when specialized assistance is needed on design. Ability to work and manage tasks on several projects concurrently Experience in designing Healthcare, Sports, Commercial, Public Sector, Industrial, Education, and/or Institutional projects. Bachelor's degree in Electrical Engineering Preferred. PE License Required Qualifications Osborn is looking for a candidate who has the following characteristics: Reliable Team Player Self - Starter Positive Attitude Strong Work Ethic Critical Thinker Detail Oriented Innovative Good Communicator Posted salary ranges reflect market-based averages for the role. Final compensation will be determined based on each candidate's experience, qualifications, and overall fit for the position. All job offers will be contingent on passing a background check. Drug testing may be required for certain clients. Osborn will only be contacting qualified applicants. EEO NOTE TO RECRUITERS: Osborn Engineering does not currently accept unsolicited resumes through or from search firms or recruiters. If you wish to be considered in the future for our list of approved recruiters, please send an e-mail to **************************. All resumes sent directly to management will not be considered.

Job Description Compensation: $90,000-$115,000 Unlock your career potential with a growing engineering firm offering exceptional advancement opportunities. We're seeking a Senior Controls Engineer to lead the design, programming, and implementation of automation and control systems across multiple industries. This role offers broad technical variety, end-to-end project ownership, and the option to incorporate business development responsibilities for those interested in a hybrid technical/commercial path. Key Responsibilities Design, program, and troubleshoot industrial control systems, including PLCs, HMIs, drives, instrumentation, and control panels. Create, read, and edit logic diagrams, wiring diagrams, single-line drawings, and P&IDs. Develop PLC programs from scratch-primarily Allen-Bradley (MicroLogix, ControlLogix, CompactLogix) and PanelView HMI systems. Troubleshoot mechanical and electrical issues in automated equipment; perform repairs and refurbish PLC modules, HMIs, and related components. Lead or assist with on-site system start-up, commissioning, testing, and problem resolution. Collaborate cross-functionally to ensure accurate process and control design throughout the full project lifecycle. Required Qualifications 2+ years of PLC programming experience (Allen-Bradley or Siemens), including building programs from the ground up. 2+ years of experience programming FactoryTalk / PanelView applications. Hands-on experience with site commissioning and start-up of control systems. Strong background in process controls preferred. Ability to perform full-cycle controls engineering: electrical drawings, panel design, PLC/HMI programming, and field commissioning. Why This Is a Great Opportunity This role sits within a well-established, fast-growing small/midsize engineering company that values innovation, autonomy, and career development. Engineers here enjoy: Flexible hybrid work arrangements for qualified candidates Exposure to diverse industries and complex automation challenges Full ownership of projects from concept through commissioning The ability to expand into business development if desired A supportive, collaborative environment with significant upward mobility About Cleveland, Ohio Cleveland offers the perfect blend of affordability and big-city amenities. Located on the shores of Lake Erie, it boasts a vibrant engineering and manufacturing sector, a thriving food and arts scene, beautiful parks, and welcoming neighborhoods. With a low cost of living and easy access to outdoor recreation, Cleveland is an attractive place for professionals looking to grow both career and lifestyle. Ready to Advance Your Automation Career? If you're a controls engineer who thrives on hands-on work, full project ownership, and the chance to make a tangible impact, we encourage you to apply. Join a company where your expertise is valued, and your career trajectory is limitless. Relevant Keyword Cloud: Controls Engineer, Senior Controls Engineer, PLC Programming, Allen-Bradley, Siemens PLC, Process Controls, FactoryTalk, PanelView, ControlLogix, CompactLogix, HMI Development, Automation Engineer, Industrial Controls, Electrical Design, Control Panel Design, Commissioning Engineer, Start-up Engineer, Instrumentation, Drives, P&ID, Logic Diagrams, Cleveland Engineering Jobs, Automation Systems, Manufacturing Automation

Vector's partner located in Westlake, Ohio, is the global leader in weathering and corrosion testing, offering test instruments as well as outdoor and laboratory services. They are searching for the right fit for their Senior Power Electronics Engineer. Direct Hire $90k-$125k/yr. Responsibilities: Engage in all phases of electrical subsystem design, printed circuit boards and sensors product development, including concept, design, documentation, prototyping, testing, and manufacturing Own multiple engineering projects including new product developments, design improvements, and cost reductions Design, build, and test prototypes to validate performance versus requirements Plan and manage project requirements, technical risks, deliverables, and timelines Develop innovative designs to meet all requirements for safety, performance, reliability and manufacturability Write test instructions, engineering reports, and engineering change notices Provide technical assistance to the purchasing, service, sales, marketing, and production departments Requirements: Bachelor's Degree in Electrical Engineering 10+ years proven record in a product development and manufacturing environment Hands on experience designing power devices and controllers, high voltage switch mode power supply, analog and digital circuits Designing and developing proper heat management solutions for circuit designs Designing circuit boards including schematics, bills of material, printed circuit board layout Desired Skills: Experience with lamp ballast design, development, and troubleshooting Experience with UV fluorescent and xenon arc lamps Designing electronics with high voltage MOSFET/IGBT Expertise designing and specifying custom inductors and transformers Troubleshooting voltage transient, EMI, and susceptibility related problems Working with 3 phase equipment up to 400V

Leading multi\-disciplinary team is looking for an Electrical Project Engineer for their Cleveland team! Responsibilities: Project\/client management Oversee electrical design execution for a variety of project types (Healthcare, Sports, Commercial, Public Sector, Industrial, Education, and\/or Institutional projects Plan\/manage design process with department managers Supervise staff\/perform following duties: Perform analysis, design and documentation for power distribution, lighting systems and backup power systems Coordinate project with specialists for fire alarm, technology and lighting design Coordinate with other internal teams\/disciplines for equipment power needs and sizing electrical distribution Perform electrical design calculations (electrical loads\/panel schedules) Develop electrical systems diagrams (one\-line) Select\/schedule electrical equipment Meet with vendors to determine specifications then edit as needed Prepare design deliverables for SD, DD, CD level documents Assist with budgeting by providing cost opinions Review contractors change orders Perform construction administrative duties including RFI responses and review of contractor change orders Ensure designs adhere to QA\/QC standards Attend meetings (clients, local jurisdictions) Work with contractors to resolve construction issues Assist with business development including participation in various trade organizations Manage multiple projects simultaneously Requirements: Bachelor's degree in Electrical Engineering preferred 8+ years of electrical design\/project management consulting experience Experience with electrical system studies (short circuit, over\-current device coordination and Arc Flash Hazard analysis per NPFA 70E) Experience\/knowledge of National Electrical Code (NEC), State Energy Code, NFPA guidelines, and FGI guidelines PE License preferred Working knowledge of design\/analysis software (Revit, AutoCAD, SKM, ETAP and Easy power) Knowledge of standard construction practices Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! ******************************************************** ************** "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"37675481","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Job Opening ID","uitype":111,"value":"47192"},{"field Label":"Location","uitype":1,"value":"Cleveland"},{"field Label":"Industry","uitype":2,"value":"Consulting"},{"field Label":"City","uitype":1,"value":"Cleveland"},{"field Label":"State\/Province","uitype":1,"value":"Ohio"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"44101"}],"header Name":"Electrical Project Engineer","widget Id":"2**********0059050","is JobBoard":"false","user Id":"2**********0736174","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":true,"job Id":"2**********3819363","FontSize":"12","google IndexUrl":"https:\/\/harrisonconsultingsolutions.zohorecruit.com\/recruit\/ViewJob.na?digest=8DY.bVOboIBo7ZJhQVLAWDd6GyMsMk.tu TEPgTN4rOM\-&embedsource=Google","location":"Cleveland","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"3cgkl37b76de065e24115963f6b2941ca7d80"}

Job DescriptionThe Electrical Engineer - Power Systems performs electrical power systems studies and analysis for industrial and utility clients. Utilizing industry standard analysis software (ETAP, SKM, etc.), the successful candidate will demonstrate the ability to create study cases, analyze results, and provide detailed written reports. A strong fundamental understanding of industrial and utility power systems and calculation methods is required. The Electrical Engineer - Power Systems is responsible for working with clients and other Nexus personnel to prepare studies including: The Electrical Engineer - Power Systems reports to the Senior Electrical Engineer or Engineering Discipline Manager. Completed technical work is provided to senior management prior to presentation to the client. This position will require occasional travel (2-3 times per year) of up to one week to visit client facilities to gather data along with other Nexus personnel. Responsibilities System Short Circuit Studies Relay Coordination Studies Load Flow Analysis Power System Harmonics Analysis Motor Starting Studies Arc Flash Hazard Studies Relay Setting File Creation & Analysis Qualifications BS in Electrical Engineering is required. Working knowledge of ETAP is required. Familiarity with other systems analysis tools such as SKM is desired. 5+ Years of experience in power systems studies Strong working knowledge of Excel and other Microsoft Office Products Education/Certification Requirements Bachelor of Science in Electrical Engineering required Position Type/Expected Hours of WorkThis is a full-time position. Days and hours of work are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Competitive BenefitsLearn more about our competitive benefits in detail. Why Nexus?Nexus Engineering Group, a distinguished independent full-service engineering, procurement, and construction management (EPCM) firm, provides comprehensive support to clients from concept through startup. With over a decade of demonstrated engineering and design success, Nexus stands out as the firm of choice for those valuing integrity and expertise. At Nexus, you will be part of a talented and passionate team dedicated to excellence and innovation. We foster a collaborative and engaging work environment, making it a place where you'll enjoy contributing to impactful projects. Joining Nexus means aligning with a firm renowned for its creativity, dedication, and relentless focus on achieving client goals. Nexus Engineering Group, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. Third-Party Recruiting PolicyLearn more about our third-party recruiting policy. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

We are seeking an experienced Electrical Design Engineer to support heavy industrial projects. This role focuses on the design and drafting of electrical power and control systems up to 480V, three-phase. The ideal candidate is a hands-on electrical engineer with strong design expertise-not a software or programming-focused engineer. Key Responsibilities *Design electrical power and control systems for heavy industrial applications, including low, medium, and high voltage systems up to 480V, three-phase. *Prepare detailed electrical drawings and documentation using the latest version of AutoCAD. *Utilize CADD and SolidWorks for electrical design and drafting. *Perform on-site investigations and field verification as required (occasional out-of-town travel). *Ensure all designs comply with applicable National and Local electrical codes. *Coordinate with project teams to support engineering, construction, and installation activities. Required Qualifications *5-10 years of experience in electrical design and drafting for heavy industrial projects. *Strong knowledge of electrical power distribution systems (low, medium, and high voltage up to 480V). *Solid understanding of electrical controls. *Proficient in AutoCAD *Working knowledge of National and Local electrical codes. *Ability to conduct field investigations and site visits as needed. Preferred Attributes *Practical, design-focused electrical engineering background. *Experience working directly with industrial facilities and equipment. *Strong attention to detail and ability to produce accurate, code-compliant designs.

We are looking for a talented Hardware Engineer with expertise in PCB schematic design and board layout using Altium. The ideal candidate will have experience troubleshooting and repairing PCBs and experience in hardware engineering. Responsibilities * Design PCB schematics and perform board layouts using Altium. * Troubleshoot and repair PCBs to ensure optimal functionality. * Collaborate with a close-knit team of engineers to develop innovative projects using the latest technology. * Contribute ideas and solutions that are valued and heard by the company leadership. Essential Skills * Bachelor's Degree in Electrical Engineering or a related field. * At least 0-3 years of hardware engineering co-op or internship experience. * Proficiency in PCB design/layout using Altium or a similar design package. Additional Skills & Qualifications * Strong problem-solving skills and attention to detail. * Ability to work collaboratively in a team environment. * Excellent communication skills. Work Environment You will be working in a small team of about 10 engineers in a collaborative and supportive company environment. The company values everyone's ideas and encourages innovative thinking. The projects involve the latest technology and Industry 4.0 advancements, making for an exciting and dynamic work atmosphere. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Avon,OH. Application Deadline This position is anticipated to close on Apr 30, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: * Hiring diverse talent * Maintaining an inclusive environment through persistent self-reflection * Building a culture of care, engagement, and recognition with clear outcomes * Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

We are seeking a highly skilled and motivated Lead AME Automation and Controls Engineer to join our team. In this hands-on role, you will lead projects focused on the design and development of fixed and collaborative automation systems aimed at increasing productivity and eliminating non-value-added work for our MR RF Coil product lines. You will be an integral part of our new product introduction projects (NPI's), leading the design transfer from Engineering to Manufacturing, including process design, qualification, control software development and validation of equipment and product. A key influencer to product design to incorporate automation standards for flexible and cost-effective solutions from the initial production release. Job Description Key Responsibilities: * Lead projects to design and develop automation systems to enhance manufacturing productivity, new product introduction and capacity. * Own the controls architecture and software for PLC, Robotics, and Vision Systems. * Lead Design Transfer of NPIs by collaborating with manufacturing, manufacturing engineering, and product engineering teams. * Identify high Return on Investment opportunities, design and conduct feasibility studies, and develop business cases to deploy automation into production. * Apply creative solutions and ideas to drive productivity and quality using LEAN methodology, novel fixturing, collaborative robots, AI, traditional automation techniques, and integration of PLCs, HMIs, and motion systems. * Support Brilliant Factory initiatives by connecting physical processes with digital information. * Create standard automation Equipment/User Requirement Specifications to drive component standardization, data standards, and safety risk assessments. * Manage projects and lead project teams in a matrix organization. * Leverage and manage outside suppliers to deliver automation solutions. * Troubleshoot factory equipment controls, update/debug control software and support factory equipment as needed. Qualifications: Required: * Bachelor's Degree in Electrical, Mechanical, Manufacturing Engineering, or related technical degree. * 3+ years' experience in factory automation, deploying various automation technologies from concept phase through final implementation into production. * Demonstrated skills in PLC and HMI programming, trouble shooting and debug * Experience in program or project management skills of internal/external integrators. * Experience developing technical documents, including the ability to write/perform FMEA's, Equipment Risk Assessments, ERS's (Equipment Requirements Specifications), and Validation Plans. * Experience with design tools such as AutoCAD, SolidWorks, and CREO. Desirable: * 5+ years' experience in the design, build, programming, and deployment of automation. * Experience with Fanuc Robot Programming and Python code development. * Experience with controls automation design and safety standards; NFPA 79, RIA15.06, and other relevant industry standards. * Substantial industrial experience in Manufacturing Engineering. * Six-sigma DMAIC & DFSS certified. * Solid working knowledge of Medical Device QMS procedures. * Experience working with global teams. * Demonstrated experience owning production processes and growing capability in yield, quality, and capacity. * Demonstrated troubleshooting, analytical, and planning skills. * Strong communication skills (written and verbal) to all levels of the organization. * Ability to identify and implement Best Practices. Additional Information GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees. Relocation Assistance Provided: No

Come work for OHM Advisors, the Community Advancement firm. With the singular mission of Advancing Communities , our diverse 750+ team of professionals works collaboratively across multiple service areas in multiple states, including architecture, engineering, planning, surveying, and construction engineering. We are a team of experts with individual specialties working together, driven to make a difference through people-focused problem-solving, design, and ideas. In everything we do, we put people first. We create places for communities of people that help solve a problem and drive them forward- advancing the whole community today and well into the future. What You Will Contribute to OHM Advisors The successful Project Engineer will have the opportunity to lead a multi-disciplinary team of engineers and technicians on municipal projects. Project engineering responsibilities include infrastructure design, preparation of construction documents, cost estimating, and thorough project QA/QC. Project Management duties include developing and managing the project scope, schedule, and budget; and delivering an overall quality project to our clients. Collaboration with a team of engineers and mentoring of entry-level staff will be essential. Your Responsibilities Managing multi-disciplinary engineering projects and engineers. Developing and maintaining project scope, schedule, and budget. Project Management with municipal projects involving infrastructure design, site/civil design, roadway rehabilitation/reconstruction, and pedestrian/bicycle facilities. Understanding of State, Local, and Federal funding programs. Understanding ODOT design criteria, standards, and specifications. Participation in local professional society functions. Client relationship management. Business development. Requirements Education, Experience & Licensure: Ohio Prof. Engineering License. 8-10 years' experience with Municipal Project Engineering. Experience with AutoCAD/Civil 3D, and/or MicroStation ORD. Technical Skills: The desire and ability to build strong client relationships. Ability to train entry-level engineers and interns. Excellent communication and organizational skills and enjoy working in a team environment. Benefits Summary At OHM Advisors, our people are our greatest asset. We're committed to providing a supportive and rewarding workplace that fosters personal and professional growth. That's why we offer a competitive benefits package designed to meet your unique needs. Benefits: BCBSM Medical, Dental and Vision Company Profit Sharing Flexible Spending & Health Savings Accounts 401(k) retirement savings plan with employer matching contribution Paid professional association membership Tuition & Certification Expense reimbursement Volunteer Service Leave 100% Employer-Paid Life Insurance Short & Long-Term Disability Options Career Advancement & Enrichment Programs: Voluntary Wellness Program OHM Grad School OHM University You can read more about each of these programs on our website. OHM Advisors is an Equal Opportunity Employer (EOE). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. #LI-CC1

REAL ALLOY is the market leader in third-party aluminum recycling and specification alloy production. Headquartered in Cleveland, Ohio, we have 17 plants strategically located across the United States, Mexico, and Canada. We convert aluminum scrap and by-products into reusable aluminum metal for a growing number of applications across various industries. We are ideally positioned to respond to the needs of an increasingly recycling-conscious world. Advanced technologies enable us to process a large variety of scrap and dross and reduce the amount of residual waste from aluminum manufacturing that would otherwise end up as landfill. Responsibilities Are you an Electrical Engineer looking for an Intern program to sharpen your skills? Do you have the drive to succeed? This Electrical Engineering SUMMER 2026 Co-Op/Internship is based out of our corporate headquarters in Beachwood, OH but will have the opportunity to travel to our plant facilities within a 4-hour distance to see the benefits of their project work in action. We are open to Co-Op and extension with right candidate. Candidate must be willing to work from the Beachwood location. *** This role is for Junior and Senior level college students *** Development Tasks: AutoCAD Electrical drafting, design and revision updates Introduction AutoCAD Electrical and Orientation Real Alloy Standards and Library Draw from sketch Update Drawing from Field Markups Draw Project Task, Initial Design Apply AutoCAD skills as needed Training on applying power design concepts for Safety requirements for Low Voltage, Controls Power 480VAC Motor Start, Soft Starter and AC Drives 120VAC and 24VDC Controls Emergency Stop and Safety Circuits Training on applying technology design concepts Industrial communications and Ethernet Rockwell PLC Platforms Hardware ControlLogix/CompactLogix/SLC500/MicroLogix and Remote I/O Input & Output Interface to equipment Online Troubleshooting and Support Rockwell Studio 5000 / RS Logix 500 PLC programming Programming Organization Self-Documentation Ignition SCADA/HMI programming Projects Tasks: Assignment of project tasks Design concept Hardware development Co-work with Mechanical Engineering Programming and Testing Communication between Engineering and Plant personnel Project Documentation Deployment Plan Implementation at plant Translation Plan to like in kind equipment Report out to business Potential Projects Combustion Controls Gas and Air Flow Meter HART Integration 480VAC Switchgear Power Equipment Data Integration and Collection into Ignition SCADA Develop Reverberatory Furnace Electrical Drawing set Integration of AC Drives into PLCs and SCADA over Ethernet Qualifications Currently pursuing a BS/MS electrical engineering degree - minimum of 3 years' progress towards a bachelor's degree in electrical engineering Overall GPA of 3.25 or above Ability to travel to job-sites for 1-3 days if needed Ability to read an electrical schematic AutoCad familiarity and/or experience Familiarity with electrical circuits design and operation Familiarity with data collection, analysis, and presentation Knowledge of and/or experience with PLC programming (preferably Allen Bradley) Knowledge of and/or experience with HMI programming The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not construed to be an exhaustive list of all job duties performed by the personnel so classified. Equal Opportunity REAL ALLOY is an equal opportunity employer and supports diversity in the workplace. Qualified applications will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Our HR teams will reach out to the applicants who met the qualifications and most closely aligned with requirements of the positions.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding ExpertTM for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 28069 Purpose Plant Engineering implements capital projects and provides engineering support for the Consumable and Machine divisions of the Cleveland Operations. Electrical engineers are responsible for the electrical design of the equipment used to manufacture welding machines and consumables. Electrical engineers ensure the equipment on the production floor meets the corporate objectives for safety, health, productivity, quality and continual improvement. Job Description (Duties and Responsibilities) Work in a team environment on capital and strategic projects for the Cleveland Operation production facilities Responsible for the electrical aspects of the projects including hardware design, software design, design documentation, networking, data acquisition, equipment installation, equipment debug, and support Work on engineering solutions to improve equipment reliability and safety, lower operation and maintenance costs, and improve ergonomics Engineer solutions that comply with ISO 14001 and EHS initiatives to improve environmental and employee health and safety Supply project leaders with capital cost estimates and project timelines for completion of electrical work Review capital equipment quotations to ensure equipment meets electrical specifications Provide technical support to Production and Maintenance departments Interface with all engineering, manufacturing, and maintenance departments along with R&D, QA, and Supply Management to ensure accuracy of project design target details Work with and often manage outside engineering and construction personnel Ensure all safety, health, environmental, and compliance aspects for the projects meet the appropriate regulations Additional responsibilities as assigned by managers within the Plant Engineering department. Basic Requirements Bachelor's degree in Electrical Engineering and a minimum of 3 years experience (Engineer II) OR Bachelor's degree in Electrical Engineering and a minimum of 5 years experience (Engineer III) Strong desire to take ownership and drive results Must have good judgment, be self-motivated, and be safety conscious Ability to handle a variety of assignment and changing priorities Ability to perform hands on work as required and work effectively on the shop floor with employees and processes Working knowledge of the NEC, NFPA, 70E, NFPA 79, and other technical codes is a plus Experience with National Instruments LabVIEW and Rockwell Automation RSLogix software is a plus Experience with Programmable Logic Controllers and AC drives is a plus Experience with AutoCAD or Microstation CAD software is a plus Ability to occasionally work off shifts, between facilities in Northeast Ohio, and travel as required. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

The Electrical Engineer - Power Systems performs electrical power systems studies and analysis for industrial and utility clients. Utilizing industry standard analysis software (ETAP, SKM, etc.), the successful candidate will demonstrate the ability to create study cases, analyze results, and provide detailed written reports. A strong fundamental understanding of industrial and utility power systems and calculation methods is required. The Electrical Engineer - Power Systems is responsible for working with clients and other Nexus personnel to prepare studies including: The Electrical Engineer - Power Systems reports to the Senior Electrical Engineer or Engineering Discipline Manager. Completed technical work is provided to senior management prior to presentation to the client. This position will require occasional travel (2-3 times per year) of up to one week to visit client facilities to gather data along with other Nexus personnel. Responsibilities System Short Circuit Studies Relay Coordination Studies Load Flow Analysis Power System Harmonics Analysis Motor Starting Studies Arc Flash Hazard Studies Relay Setting File Creation & Analysis Qualifications BS in Electrical Engineering is required. Working knowledge of ETAP is required. Familiarity with other systems analysis tools such as SKM is desired. 5+ Years of experience in power systems studies Strong working knowledge of Excel and other Microsoft Office Products Education/Certification Requirements Bachelor of Science in Electrical Engineering required Position Type/Expected Hours of WorkThis is a full-time position. Days and hours of work are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Competitive BenefitsLearn more about our competitive benefits in detail. Why Nexus?Nexus Engineering Group, a distinguished independent full-service engineering, procurement, and construction management (EPCM) firm, provides comprehensive support to clients from concept through startup. With over a decade of demonstrated engineering and design success, Nexus stands out as the firm of choice for those valuing integrity and expertise. At Nexus, you will be part of a talented and passionate team dedicated to excellence and innovation. We foster a collaborative and engaging work environment, making it a place where you'll enjoy contributing to impactful projects. Joining Nexus means aligning with a firm renowned for its creativity, dedication, and relentless focus on achieving client goals. Nexus Engineering Group, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. Third-Party Recruiting PolicyLearn more about our third-party recruiting policy.